Trabajos equipment engineer en Linden, New JerseyCrear alertas

A company is looking for a CLEARED Network Engineer to support a project for the Coast Guard with remote flexibility.Key Responsibilities Design and implement Cisco Catalyst SD-WAN architectures Configure and optimize Cisco networking equipment Implement security measures aligned with DoD standa

Job Description Salary: $100000 - $135000 Pay Grade: 16 Other Forms of Compensation: ESFM is the corporate facilities management (FM) division of Compass Group USA, a Gold-level Corporate Sustaining Partner of the International Facility Management Association (IFMA), and a Platinum Corporate Member of the Association of Energy Engineers (AEE). ESFM self-performs 80% of all FM services provided to clients. Our portfolio of solution categories includes Facilities Maintenance & Engineering, ESG Programming, Laboratory Support Services, Janitorial & Industrial Cleaning, Landscaping & Grounds Management, Workplace Solutions and Managed Services. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. ESFM’s clients include many household names from the life sciences, technology, oil & gas and manufacturing markets. Job Summary We are seeking an experienced Chief Engineer to lead and manage all hard facilities operations and maintenance activities within our facility. This critical role ensures the smooth functioning of scientific, production, and formulation equipment while supporting soft services such as custodial operations, client-facing staff, and grounds maintenance. If you thrive in a fast-paced, production-oriented environment and have a passion for operational excellence, we want to hear from you! Key Responsibilities • Lead and oversee all hard facilities operations and maintenance activities., • Troubleshoot electrical equipment and PLC systems., • Manage mechanical services for facilities and scientific areas (FMO support)., • Repair and maintain facility, production, and formulation equipment through preventive maintenance programs., • Coordinate fabrication of machine parts to maintain operational efficiency., • Ensure compliance with OSHA and facility safety standards., • Install and maintain systems supporting facility operations (DI water, compressed air, chilled water)., • Assist with equipment setup and disassembly based on production schedules., • Partner with outside vendors and manage new equipment installations., • Maintain instrument calibration using CMMS systems (e.g., ARCHIBUS)., • Manage spare parts inventory to minimize downtime., • Source parts and equipment as needed., • Support administrative tasks related to ordering and closing work orders., • Participate in safety programs (JSA, SHAP, MESUR, EHS inspections)., • Provide technical support to Demi-Grand, Pilot, and Lab operations., • Oversee BMS programs and support facility mechanics. Capabilities & Technical Skills • Advanced knowledge of air conditioning, refrigeration, and heating principles., • Working knowledge of boiler systems., • Proficiency in balancing air and water treatment systems per HVAC protocols., • Skilled in mechanical and electrical installation of equipment., • Strong troubleshooting skills for electrical equipment and PLCs., • Familiarity with OSHA safety standards and compliance requirements. Qualifications • Bachelor’s degree in engineering., • 7+ years of experience in facilities engineering or maintenance., • Strong leadership and communication skills., • Ability to excel in a fast-paced, production-oriented environment. Apply to ESFM Services today! ESFM is a member of Compass Group USA Click here to Learn More about the Compass Story Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Applications are accepted on an ongoing basis. Eurest Services maintains a drug-free workplace. Associates at ESFM are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Paid Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave, • Personal Leave Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. Req ID:1466569 ESFM Julia Lari

Job DescriptionBenefits: • Dental insurance, • Health insurance Must have: Blue seal refrigeration toxic 2-x license and black seal Job Description Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management. Performs duties as assigned by the Facility Manager and/or Gold Seal Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment. Coordinates both internal and external resources for maintenance of the facility. Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines. Performs preventative maintenance on equipment to maintain in good working condition. Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PMs) related to machine overhauls and repairs. Performs other duties as assigned. WHAT'S ON THE MENU Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment. Takes a leadership role on the emergency response team in the event of release of hazardous chemicals. Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS High school diploma or GED required. Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques. Basic knowledge in programmable logic controllers (PLCs) preferred. Demonstrated knowledge and application of best practices in maintenance and safety management. Knowledge of state and federal regulatory requirements as related to plant and utilities systems operations, safety, and environmental agencies. Knowledge of best available energy management practices and procedures. Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed. Requires

Job DescriptionDescription: About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations Lincoln Electric Products Co. Inc. seeks a highly motivated and results-oriented Electrical Engineering Manager is responsible for overseeing and managing the compliance, development, and implementation of engineering standards, specifically focusing on UL (Underwriters Laboratories) testing and manufacturer test requirements. This role involves ensuring that products meet all necessary safety, regulatory, and industry standards, particularly for electrical and mechanical systems. The manager will work closely with engineering teams, product development, and quality assurance to guide the organization in meeting UL standards and regulatory requirements, ensuring products are certified and safe for use in the market. It is a full-time, exempt position, and the candidate will report directly to the Director of Engineering. Working Conditions: Office Environment What We Offer: • Competitive Salary: Paid on a weekly basis., • Comprehensive Benefits Package, Including Health, Dental, and Vision Plans., • Retirement Plan: 401(k), • Paid Time Off (PTO): For vacation and personal days. · · Oversee the development and implementation of engineering related to UL and manufacturer test requirements (MTR) for electrical and mechanical products. · Ensure all products are compliant with UL standards (e.g., UL 508A, UL 60947) and other regulatory standards applicable to the industry. · Work closely with internal and external stakeholders to stay updated on UL changes, revisions, and new industry standards. · Lead efforts in coordinating product testing and certification with UL or other regulatory bodies to ensure compliance with industry standards. · Manage and track testing schedules and product submissions for UL approvals. · Act as the primary point of contact for testing agencies, ensuring efficient and accurate communication regarding testing and certification requirements. · Collaborate with engineering and product development teams to integrate UL and manufacturer test requirements into the product design phase. · Provide technical guidance and expertise to engineering teams to ensure designs meet all applicable UL standards. · Assist in troubleshooting and resolving issues that arise during testing or certification processes. · Conduct regular audits of product designs, processes, and manufacturing practices to ensure continuous compliance with UL and other regulatory requirements. · Prepare and manage internal and external inspections, ensuring that all products meet safety standards and regulatory guidelines. · Ensure that all documentation related to UL testing, compliance, and certifications is complete, accurate, and maintained for audit purposes. · Work closely with the Quality Assurance, R&D, and Manufacturing teams to ensure product quality and safety across all stages of the product lifecycle. · Educate and train engineering teams on UL MTR requirements and the importance of compliance in the product development process. · Collaborate with the legal and regulatory affairs departments to stay informed about industry regulations and compliance changes. · Monitor industry trends and emerging technologies to ensure the company’s products stay ahead of regulatory changes and market demands. · Identify opportunities to improve internal processes, enhance product safety, and streamline certification procedures. · Implement corrective and preventive actions when issues related to compliance, testing, or certification arise. Requirements: Skills, Requirements, and Specifications · • 10+ years of experience in Electrical engineering, focusing on switchboards, switchgear, or electrical equipment., • 4+ years in a leadership or managerial role, • 4+ years of experience in engineering standards management, UL testing, and product compliance, particularly in the electrical or mechanical industries., • Experience with product safety and regulatory certifications (e.g., UL 508A, UL 60947, IEC)., • Proven track record of working with testing agencies and managing certification processes., • In-depth knowledge of UL standards, testing procedures, and other industry standards such as IEC, ANSI, and NEC., • Strong understanding of electrical and mechanical system design principles and how they relate to safety standards., • Excellent project management, organizational, and documentation skills., • Strong communication and interpersonal skills, with the ability to collaborate with cross-functional teams and external agencies., • Ability to interpret complex technical documentation and standards and translate that into actionable requirements. Experience with CAD tools, product design, and development., • Knowledge of risk assessment techniques and compliance risk management., • Familiarity with ISO standards and other international regulatory requirements., • Experience with electrical product testing (e.g., electrical enclosures, switchgear) and mechanical safety standards., • Primarily office-based with occasional visits to manufacturing facilities and testing laboratories., • Involves regular interaction with engineering teams, product managers, external testing agencies, and regulatory bodies., • May require occasional travel for product testing, certification activities, and industry conferences. Education: • Bachelor or Masters Electrical Engineering Degree, • Professional Engineer (PE) certification is an advantage.

Job DescriptionJob Title: Manufacturing Engineer Job Description We are seeking a highly skilled Manufacturing Engineer to lead and manage the daily operations and troubleshooting of SMT and THT processes. This position focuses on implementing advanced manufacturing techniques in the aerospace and defense industry, specifically in energy storage product lines. Responsibilities • Lead and manage the daily operation and troubleshooting of SMT and THT processes., • Set up, program, operate, and maintain SMT equipment, including MYCenter, MY300, and MY700 systems., • Program and optimize Mirtec AOI/SPI systems for accurate inspection and process control., • Lead selective soldering processes and maintain Universal VCD equipment., • Oversee reflow soldering processes, including oven profiling and process validation., • Participate in New Product Introduction (NPI) activities, providing DFM input and ensuring smooth production ramp-up., • Utilize strong knowledge of MPM Stencil Printer and Jet Printer Programming., • Develop, document, and maintain PCBA manufacturing processes in accordance with IPC-610 and JSTD-001 with Space Addendum standards., • Identify and implement improvements in yield, efficiency, and throughput through data-driven root cause analysis and process control.Essential Skills, • Experience with SMT and THT technologies, including MYCenter, MY300, and MY700 systems., • Proficiency in programming Mirtec AOI/SPI systems for inspection and process control., • Strong knowledge of PCB manufacturing and electronics components., • 5+ years of experience in PCB Assembly on both SMT and THT technologies., • Experience working in the electronics industry., • Programming experience.Additional Skills & Qualifications, • BA degree in engineering-related field.Work Environment This role is onsite five days a week. You will work closely with three other engineers. The team is currently very busy due to a backlog caused by external factors. The work involves collaboration with advanced power conversion and control equipment designs, utilizing software-based command and control systems, active power factor correction, and data bus communication technologies. Job Type & Location This is a Permanent position based out of Avenel, NJ. Pay and Benefits The pay range for this position is $120000.00 - $160000.00/yr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Avenel,NJ. Application Deadline This position is anticipated to close on Dec 18, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description Job Overview: A large Manufacturing plant in NJ is looking for a Senior Industrial/Process Engineer to lead efforts in optimizing production systems, improving workflows, and driving technical process innovations across our high-volume manufacturing plant. This role combines hands-on engineering expertise with strategic leadership, ensuring that operations run efficiently, safely, and at scale. The ideal candidate should bring strong technical capability, design and optimize facility layouts to maximize space utilization, streamline material flow, and support scalable production, and the ability to guide teams through continuous improvement initiatives. Key Responsibilities:  Analyze production schedules, workflows, and system specifications to maximize throughput, efficiency, and quality.  Design and optimize facility layouts, focusing on space utilization, equipment placement, and material flows.  Drive process upgrades, automation, and system enhancements.  Define and enforce technical and production standards with cross-functional teams.  Implement control systems that reduce downtime, cost, and variability.  Prepare cost models, equipment specifications, and capital expenditure justifications.  Act as a technical leader for the Continuous Improvement (CI) team, mentoring engineers and operators.  Train staff on new technologies, standards, and best practices.  Promote a data-driven, problem-solving culture across the plant. Qualifications:  Bachelor’s degree in industrial/Process Engineering or related field (required).  Significant experience in manufacturing process design, optimization, and improvement.  Advanced knowledge of production machinery, automation, and system layouts.  Strong technical skills, including, MS Office, and process modeling tools (with AutoCAD optional).  Proven ability to lead technical projects and elevate team capability.  Excellent analytical, communication, and leadership skills. Company DescriptionRecruiting CompanyRecruiting Company

Job DescriptionDescription: About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations Lincoln Electric Products Co. Inc. seeks a highly motivated and results-oriented Mechanical Engineer to join our growing team. In this role, you will play a pivotal role in developing and innovating our low-voltage switchboard products. It is a full-time, exempt position, and the candidate will report directly to the Engineering Group Leader. Working Conditions: Office Environment What We Offer: • Competitive Salary: Paid on a weekly basis., • Comprehensive Benefits Package, Including Health, Dental, and Vision Plans., • Retirement Plan: 401(k), • Paid Time Off (PTO): For vacation and personal days., • Develop comprehensive mechanical designs for switchboard enclosures, busbars, and structural components, utilizing advanced CAD software to create detailed 2D and 3D models., • Select appropriate materials and manufacturing processes for all components, considering cost-effectiveness, performance requirements, and industry best practices., • Employ simulation and analysis tools to optimize designs for superior performance, reliability, and thermal management., • Lead the mechanical design process to strictly comply with relevant industry standards and regulations (ANSI, IEEE, IEC, local codes)., • Ensure that switchboard design complies with relevant design practices, electrical codes, and safety standards such as UL891, UL67, UL508A, UL50, the National Electric Code (NEC), the New York City Electric Code (NYCEC), ANSI, IEEE, IEC, the Utility Standard, and local regulations., • National Electrical Code (NEC 2008-2020), NYNEC, UL 891, UL67, UL 50, UL 508a in product development, • Stay abreast of emerging standards, innovative materials, and cutting-edge design methodologies., • Collaborate closely with electrical engineers, design teams, and project managers to achieve project objectives seamlessly., • Verify switchboard designs meet stringent mechanical performance and safety standards (e.g., UL, NEC)., • Investigate and resolve any mechanical quality issues or non-conformities identified during production or in the field., • Generate comprehensive engineering documentation, including detailed mechanical specifications, bills of materials (BOMs), and user-friendly technical manuals., • Maintain accurate records of all design changes, revisions, and updates., • Actively monitor project budgets and identify cost-saving opportunities through design optimization without compromising quality or safety., • Provide technical support for maintenance and repair activities on deployed switchboard products., • Assist in troubleshooting and resolving mechanical issues that may arise in the field. Requirements: Skills, Requirements, and Specifications • Bachelor's degree in Mechanical Engineering (Master's degree a plus)., • Experience in sheet metal and fabrication design., • Proven experience in switchboard design., • Familiarity with major brands in the industry (Schneider, ABB, Eaton), • Proficiency in advanced CAD software or mechanical design AutoCAD, Autodesk Inventor., • In-depth understanding of mechanical standards., • Excellent communication, collaboration, and teamwork skills., • Ability to thrive in a fast-paced, results-oriented environment.

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance.

Job DescriptionSalary: Minimum - $70,000 annually Who We Are Binsky is a leader in world-class mechanical construction. Dedicated service to our clients has elevated us as the premier mechanical contractor for projects of all sizes and scopes. Innovation is the key at Binsky and along with our creative processes, we are always on the cutting edge of technology. Recognized as one of the most respected mechanical contractors in New Jersey and Pennsylvania, Binsky delivers high quality workmanship on projects from large traditional construction to commercial HVAC, plumbing, and service. Building incredible projects requires exceptional people. We are seeking an Project Engineer (onsite) for our Rahway, NJ jobsite. Why We Need You! We need talented individuals, like you, who care about the company and our customers, and can help us continue to grow and succeed! The Role The Project Engineer is responsible for key aspects of the project, related to setup, planning, progress and closeout. Accountabilities QA/QC Process • Review QA/QC requirements of the project and generate applicable submittals and procedures., • Lead install tracking utilizing the Stratus platform, provide updates on progress/weekly reports., • Take the lead on all required testing documentation, prepare/submit to the client. Labor Tracking • Prepare construction and manpower schedules. Assist Project Manager • Review revised contract documents and work with Project Manager to assist in cost proposals as required., • Review contract documents and extract pertinent information related to constructability., • Review contract requirements and complete essential project set-up reports and submittals., • Create and distribute Requests for Information (RFIs) required to proceed with the construction and design activities., • Review and generate engineer submittals for review by design team and owner. Field Inspection • Manage expediting chart and tracking key outstanding items and delivery dates. Information Flow • Create and update equipment logs and populate with necessary date and information., • Create key scopes of work for miscellaneous subcontracts and field purchased items. Qualifications: Skills • An understanding and broad knowledge of Plumbing, HVAC and Process systems for commercial and institutional construction, including hospitals, schools, R&D facilities and multi-story buildings is preferred., • Strong computer and technology skills including Microsoft Office, Bluebeam and Navisworks., • Ability to prioritize, set goals and manage multiple tasks under time constraints and meet strict deadlines, • Ability to read or learn to read architectural, structural and mechanical plan and be familiar with a variety of plumbing, HVAC and Process systems and terminology, • Demonstrate strong math aptitude, organization, verbal, written and analytical skills, • Knowledge of or ability to learn Plumbing and Mechanical theory and code to identify issues with the designs or conflicts with other trades Education and Experience • Bachelors Degree in Mechanical Engineering preferred., • Experience in commercial plumbing, process and HVAC projects preferred., • Must be comfortable working with clients, architects, engineers, subcontractors and vendors. Physical Requirements • Physical activity not limited to climbing, bending, kneeling, crawling, lifting<50 lbs, sitting and walking. What We Offer Binsky values the well-being of its employees and offers competitive wages and a range of benefits: • Medical, Dental and Vision benefits, • 401k with company contribution, • 8 paid holidays per year, • Paid Time Off Binsky is an EOE. This job description does not necessarily represent an exhaustive list of responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the job, management reserves the right to revise the job or require that other different tasks are performed as circumstances change.

Job DescriptionCompany Description Stratas Foods LLC is the leading supplier of fats and oils to the Foodservice, Food Ingredients and Retail Private Label markets in North America and is a producer of quality bulk and packaged dressings, mayonnaise and sauces. Stratas Foods was formed in October 2008 as a 50/50 joint venture between ACH Food Companies (ACH) and Archer Daniels Midland (ADM). Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood and Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description The Plant Project Engineer I will provide engineering support and project leadership for the plant The expectation is that this role will spend approximately 60% of the time on project related activities and 40% of the time on plant support activities. At times either activity could exceed expectation. The Plant Project Engineer I role will include project implementation, production and equipment improvement initiatives and support the daily operations of the plant to ensure all safety and quality goals are achieved. Qualifications • Project management, project planning, project coordinator, purchasing, and supervision of contractors for various projects to assure completion on a timely basis within budget., • Adhere to and enforce Good Manufacturing Practices (GMP) and HACCP requirements., • Lead and assist management with appropriate training to assure regulatory compliance., • Report to the Director of Engineering with a dotted line to the Plant Manager., • Maintain appropriate communication/relationships with all employees, vendors, visitors., • Provide the necessary safety training to contractors and others as necessary., • Follow, monitor, and ensure compliance with all safety, food safety, environmental, GMP rules, regulations, and policies., • Attend daily production/quality meetings., • Provide technical support for plant processes and improvements., • Observe facility operations and assist with problem solving on a regular basis., • Excellent oral and written communication skills with proven ability working well with people., • Ability to identify critical areas for improvement and develop plans for correction., • Competent in making sketches, drawings, line layouts, plans etc., and written instructions as necessary to affect equipment maintenance / repair., • Participative team attitude skills with all personnel to assure production standards, safety, and sanitation levels are maintained as defined by the Mission Statement., • Good skills in ammonia refrigeration, steam generation and PLC’s., • Good problem solving skills through team and individual efforts. BS degree in engineering or technical related area from an accredited college/university; Chemical, Electrical, or Mechanical preferred Related Experience Proven Engineering experience of 3 – 5 years, project management is a plus Equipment/Software Skills Working knowledge in personal computers (Microsoft software necessary, Project management, Microsoft Project preferred) and basic understanding with Allen Bradley PLC. Knowledge of CMMS such as MP2 is a plus. Must have good working knowledge of general PC systems. Certifications, Licenses, Registrations None required, any maintenance related licenses would be a plus such as PE, ASME welding, PLC’s , wastewater, etc. Additional Information Physical: While performing the duties of this job, the employee is regularly required to walk, sit, and stand. The employee will also be required to use hands, arms and fingers. Must have the ability to lift 50 pounds. Ability to walk distances across facility, climb steps and ladders on occasions, sitting at office desk work, sometimes in cooler atmosphere ( 35-45 degrees) , sometimes in engine room ( + 95 degrees in hot months). Language Bi-lingual is preferred Sensory: Visual, speaking, and touch is essential. Mental/Reasoning: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form Salary: $122,000 to $153,000 Annual Bonus Incentive: 5% Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: Stratas Foods California Privacy Rights Act Policy:

Job Description About Bevara Named “Top Places to Work” and one of the “Fastest Growing Companies”, Bevara focuses on empowering our team members with the tools and support they need to reach their professional aspirations. We foster a vibrant, interactive team culture that values collaboration. We promote a healthy work-life balance and pride ourselves on working hard while also enjoying our time together! Be a part of something big and join our team! About the Position We are looking for a dedicated individual to provide world-class service at some of our commercial buildings in between Trenton and Eliabeth, New Jersey on a limited part-time basis. As a Flex Building Engineer, you will work alongside our Building Engineering team to provide support and back up coverage on an as-needed basis. The Flex Engineer will train with our full-time Building Engineer a few hours a month to stay current and familiar with the buildings and will act as back up coverage during vacations or possibly provide additional emergency support. As such, you will be responsible for maintaining the property’s physical condition and safeguarding it against damage, loss, and deterioration. The ideal candidate is proactive, self-motivated, and versatile—a true jack of all trades. The ideal candidate will have a flexible schedule- perhaps a retired Engineer or someone who owns their own business. This position is perfect for someone looking for some additional hours per month but not tied to a set schedule. Typical Hours: 1st shift What you’ll be doing • Conduct regular assessments of building systems., • Perform minor repairs, preventative maintenance, and respond to service requests for both interior and exterior building equipment., • Manage work order requests related to mechanical, electrical, plumbing, and fire systems., • Proactively maintain an ongoing task list for the property management team., • Serve as the primary contact for vendors, overseeing their check-in/out process and escorting them to their work areas while documenting the work completed., • Assist with fire panel and extinguisher inspections., • Ensure a safe job site and adhere to company, OSHA, and client-specific safety standards., • High School Diploma or GED., • Preferred 3-5 years of experience in commercial building operations and engineering., • Knowledge of HVAC, electrical, and plumbing systems., • Ability to manage multiple projects and make independent decisions., • Basic computer skills and proficiency with smartphones (email, texts, work order systems)., • Current and valid driver’s license. Offers of employment are contingent upon successful completion of the following: • Drug screening, • Background check, • Physical examination, • 401(k) retirement plans with company match starting Day 1!, • Free on-site parking., • Mileage reimbursement (When applicable)., • Uniforms plus annual uniform allowance., • Tools and equipment provided for your job., • Internal advancement opportunities Bevara Building Services provides equal employment to all persons. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. Powered by ExactHire:188768

Job Description Overview Who we are— Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here’s what Transcat has to offer— • Work that matters., • A values-based culture where people care about each other and the work they do together., • Flexibility., • Training and development to accelerate learning and career advancement. A CMMS Engineer, to support our clients with activities related to the use, operation, migration, or analysis of their Computerized Maintenance Management Systems (CMMS). This is a on-site position with occasional travel up to 25% of the time. You will report directly to our CMMS Service Lead. This is a project-centered role. In your first project, you will be responsible for- data migration and configuration of CMMS work instructions, workflows, asset hierarchy creation, and system integrations to ensure seamless implementation. You will also provide change management support to site teams, helping them drive system adoption and operational efficiency. Responsibilities Essential Duties and Responsibilities— • Project/ Migration, • Perform field walkdowns to verify the accuracy of the equipment data., • Carry out all technical data reviews and data entries in the system., • Translate and cleanse raw data in preparation for Data Migration., • Assist in the preparation of client project status reports and immediately communicate project deviations or delays to the Project Manager., • Meet regularly with all stakeholders to discuss progress, communicate changes, and support the entire change effort., • Assist with other continuous improvement and optimization projects, as required., • BI/ Optimization, • Extract and analyze data using business intelligence tools to aid business decisions., • CMMS Support, • Provide support to end-users in navigating and utilizing the CMMS., • Input and maintain asset and equipment data in the CMMS., • Track client requests and assist with metric and key performance indicators (KPI) reporting., • Other duties as assigned. Qualifications Required Knowledge, Skills and Abilities: • Preferred: Associate degree in a STEM field, or trade certification in instrumentation, mechanical, electrical, or related engineering field., • 1 -3 years’ experience in CMMS-related work (front end). Life Science experience preferred but not required., • Experience with either SAP or Hexagon., • Proficient in MS Office platforms, particularly MS Excel. BI Tool knowledge a distinct advantage., • Familiarity with data management processes (paper-based / digital change control processes)., • Ability to perform field verification / data collection for assets to be added to / changed on the CMMS., • Ability to complete projects on time that meet our quality standards., • Ability to quickly understand new software platforms., • Ability to build data for CMMS systems to the highest level of quality (averaging zero errors consistently)., • Able to travel up to 25% of the time. If this sounds like you, apply today! Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report. Salary Range $55,000 - $67,499 per year. #ZR

Job DescriptionElectrical Engineer - OCONUS Riyadh, Saudi Arabia Exp Federal is an established, collaborative, and growing full service architectural and engineering firm that provides a full range of design solutions, construction and mission support to the federal government. Our team of professionals operate in some of the most challenging environments to provide support services to a variety of governmental agencies globally. We enjoy what we do and are good at it. The Challenge: We are seeking an Electrical Engineer who can provide regional technical support for a potential project in Riyadh, Saudi Arabia. This position is contingent upon award of contract. Principle areas of responsibility are: • Responsible for developing inspection criteria, electrical designs; performing technical reviews of electrical designs developed by architectural-engineering firms (A-E) or government organizations and resolving electrical design related problems arising during construction and inspection by the inspection team., • Provide expertise on the electrical engineering aspects of the installation; modification; operation; and maintenance of facilities, mission systems, support systems, and power generation/distribution/grounding systems., • While there is not a design element in this contract, the Electrical Engineer will serve as a subject matter expert to review and inspect electrical installations to ensure code compliance for new construction that is in progress or completed., • There may be a need, from time to time, to prepare drawings, specifications, and procedures for the repair, installation, integration, and maintenance of electrical equipment and systems., • Employment is project-based and will take place in ., • A BSEE degree from an accredited college/university, • Experience with installation and maintenance of low voltage (<1,000 VAC RMS) 50/60 Hz single and multiple phase wiring, including grounding., • At least two years of experience demonstrating the ability to apply the standards of UFC 1-200-01, UFC 1-201-02 and UFC Series 3-500. Salary Range: This position has an annual range of $110,000.00 To $150,000.00. The actual hourly is based on several factors that are unique to each candidate, including but not limited to skill set, depth of experience, certifications, and specific work location. More About Us: Exp Federal delivers full-service Architectural & Engineering and Design-Build solutions. You will be part of an expanding team that works collaboratively across our wider exp Federal design studios. As part of a project team, you will have the opportunity to work on a variety of projects that keep you engaged and showcase your individual talents. We believe in identifying potential in people and then providing opportunities to achieve success. Our employees work on complex projects that require innovative, efficient solutions, and collaboration across various disciplines. Joining our team is a commitment to meaningful work supporting federal government clients across multiple sectors. Employees and clients alike will look to you for results that exceed their expectations. Our Values: Respect: We respect people, honor diversity, and treat each other fairly. These are the cornerstones of our culture and the key to our culture and the key to our ability to work successfully as a global team. Unquestioned Integrity: We operate with the highest standards of honesty and responsibility – as individuals and as a corporation. We’re people who meet routine, everyday obligations with honesty. Safety: We place the highest priority on the health and safety of our employees and protection of our assets and the environment. Our goal is zero work-related injuries. Customer Service: We listen and respond to the changing needs of our customers, the industry, and the environment, and draw upon lessons learned from our experiences around the world. Impeccable Quality: We recognize that quality is fundamental in all our operations — it is everyone’s responsibility. We have established procedures, assessments, and continuous improvement processes in place to ensure the quality of our work. Sustainability: We understand the impact of our work on the environment and that sustainability is a part of everything we do. We work with customers to provide responsible, efficient, healthy, and effective project solutions to reduce our overall environmental impact. Salary Range: This position has an annual range of $110,000.00 To $150,000.00. The actual hourly is based on several factors that are unique to each candidate, including but not limited to skill set, depth of experience, certifications, and specific work location. What We Offer: ⌚ Exponential full-time professional growth and development ⏩ Fast paced and professional work culture ???? 401(k) employer match ???? Learning & Development tuition reimbursement ????️ Generous PTO policy What Happens Next? Our Talent Engagement Team will contact you via email to let you know what next steps at exp Federal look like for you! Make sure to check your spam. Don’t worry, if you are not selected to move forward in the interview process, we will keep your resume on file for future opportunities you may be a better fit for. *Actual compensation packages are based on several factors that are unique to each candidate, including but not limited to skill set, depth of experience, certifications, and specific work location. This may be different in other locations due to differences in the cost of labor. Exp Federal is proud to be an Equal Opportunity Employer who fully and actively supports equal access for all people regardless of Race, Color, Religion, Gender, Age, National Origin, Veteran Status, Disability, and Family and Medical Leave. U.S. Citizenship is required for our positions in accordance with 8 U.S.C. 1324b.2c. Should you need any special accommodations, please feel free to contact us at and we will arrange for the most suitable accommodations based on your needs. Beware of Fraudulent Job Postings Please be aware of recruitment scams where people or entities are misusing the name of exp Federal/exp Federal Pacific to post fraudulent job postings. We will never charge a fee for joining our company or to vet the authenticity of an employee or applicant. Exp Federal | LinkedIn | ClearanceJobs | ADP Career Center

Job Description Job Description POSITION: CAD Designer REPORTS TO: Project Engineering Manager LOCATION: Mountainside, NJ OBJECTIVE: To be a valuable team member of VERREX providing drafting support to the Engineering Department and others to complete projects in a timely, professional manner. COMPENSATION: Salary, exempt (non-hourly), monthly cell phone stipend. BENEFITS: Verrex offers a comprehensive benefits package to support the health, well-being, and financial security of our employees. Benefits include: • Medical, dental, and vision insurance (VSP), • Company-sponsored 401(k) plan with matching contributions, • Company-paid life insurance and AD&D coverage ($50,000), • Long-term disability (LTD) insurance, • Optional supplemental life insurance available for purchase, • Healthcare and Dependent Care Flexible Spending Accounts (FSAs) RESPONSIBILITIES: • Be able to read and understand architectural drawings and extract information needed for the design and implementation of audiovisual systems., • Read and interpret wiring and schematic diagrams and develop an understanding of system fabrication and installation needs., • Ability to multitask across multiple projects with different project teams to meet various deadlines as set by project schedules., • Create drawings using company CAD platforms, primarily AutoCAD and/or Revit, under the direction of the Project Engineer, Project Manager or Account Executive, which depict wiring and architectural details needed, in accordance with Verrex Standards, Practices and Procedures., • Import, convert, and/or manipulate drawings received from clients, architects and/or consultants in order to facilitate their ease of use within a Verrex drawing package., • Create and maintain detail drawings which may include but are not limited to: mounting details, installation details, equipment details, rack requirements, etc., • Create and maintain accurate CAD blocks which conform with company standards in centralized storage system for continued use by yourself and others within the CAD and Engineering team., • Report on task progress in company tracking platforms, • Maintain a basic understanding of AV technology and the proper interfacing of components to be an active participant in system design with the Project Engineer., • Revise drawings using notes and “red lines” received from the Shop, Field Technicians, Project Managers and Engineers., • Maintain a comprehensive naming and storage scheme for archiving customer drawings for possible future use., • Creation of any other types of drawings that Management deems necessary for jobs or projects that Verrex is involved with., • Must show proficiency in use and understanding of AutoCAD, Bluebeam, Visio, Word, Excel, Microsoft Outlook, Adobe Acrobat and other applications required to perform drafting duties., • Proficiency in Revit is strongly preferred. This job description may be revised at any given time by Verrex Management. Employee Handbook Please refer to the Verrex Employee Handbook for company policies on such issues as employment wages, salary, benefits, services, reimbursable expenses, employee communications, safety, health, standards of conduct, and corrective action. Equal Opportunity Employer Statement Verrex is proud to be an equal opportunity employer. We are committed to creating an inclusive, respectful workplace where everyone can thrive.

Job DescriptionJoin the team at New Jersey’s largest wine and spirits distributor! At Allied Beverage Group, we’re proud of our dynamic, family-based culture and our role in keeping the beverage industry moving. If you're looking for a great company with great people—this is the place to be! Overview The Night Shift Manager is a key leader position in the distribution and operations organization reporting directly to the Operations Director. Requires strong interpersonal and communication skills as well as knowledge of warehouse operations to include inventory control, shipping and receiving operations in a Direct Sales organization. Preference for warehouse automation experience (especially Knapp) and union environment is a plus but not required. Mid-shift Manager directs the mid shift and returns aspects of operations, ensuring the highest level of customer service from the warehouse to customers while improving productivity through continuous improvement in fill rate, throughput, and cost.Responsibilities • Planning- Ability to identify and plan for staffing requirements based on knowledge and forecasting for OSR and Returns. Has the ability to make decisions based on experience in shipping, receiving and inventory control. Ensures that procedures and processes match requirements of the operation. Capability to train and implement new technology and processes while maintaining productivity, • Continuous Improvement – Understanding urgency to reach daily goals during the operation. Learning from trends to Develop and Execute with the management team and frontline correct standard operating procedures and performance-based metrics to drive results through continuous improvement programs, • Building an inclusive culture – Individual and collective accountability, reward and recognition programs, communication designed to develop the frontline employees and build a desirable place to work., • Collaboration- Partnering with Night and Day operations managers, delivery, and Maintenance functions to identify areas of opportunities for improvements to fill rate, throughput, and reduction of cost., • Safety- Direct programs to ensure the safety of all personnel, equipment and property. Provide safety instruction to personnel as needed. Report all work-related injuries immediately. Provide immediate medical attention to injured employees as necessary. Ensure compliance with appropriate government regulations.Qualifications, • Bachelor’s Degree ( Logistics management, Mechanical engineer, or Business Management, • 5+ years of senior supervision level experience within a distribution warehouse, • 7+ years of operation supervision experience, • Preferred: Warehouse automation experience, • Functional system understanding in WMS, Microsoft Office, Excel, PowerPoint, • Ability to work non-traditional business hours including evenings, nights and weekends only when required The Company is dedicated to ensuring a safe and secure environment for our team members and visitors. To assist in achieving that goal, we conduct a drug and background check for all new team members post-offer and prior to the start of employment. The Immigration Reform and Control Act requires that verification of employment eligibility be documented for all new employees by the end of the third day of work. Allied Beverage Group participates in the E-Verify program to confirm employment eligibility of all new hires in the United States. EEO and AI Disclosure Statement Allied Beverage Group is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, genetic information, or any other legally protected characteristics. As part of our recruitment process, Allied Beverage Group uses artificial intelligence (AI) tools to support the initial review of applications. These tools are designed to assist our recruiters in identifying qualifications and experience that align with the requirements of each role. The tools do not make hiring decisions. All final decisions are made by our recruitment team and hiring managers. We are committed to fair and equitable hiring practices. If you have questions about this process or need an accommodation, please contact Human Resources. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Blow Mold Field Service Mechanic - Bayonne, NJ As a Blow Mold Machinery Field Technician, be responsible for working within the framework of a team and performing the following activities: Visiting customers at their work sites and diagnosing & repairing Bottle Molding Machinery and related equipment Performing regular and preventative maintenance Up-selling preventative maintenance programs and other ancillary services Training operators Maintaining spare parts inventory Requirements: Ability to read and understand hydraulic and electrical schematics Ability to diagnose and repair equipment Ability to keep up spare part inventory Ability to complete services reports Some computer skills required Preferred Skills: Experience in Blow Mold machines. Experience with PLC controls ** Knowledge of electronic controls High profile position with a wide path to growth and development. Company offers starting compensation to $140,000 including comprehensive benefits package. All expenses reimbursed, company van provided. For complete details contact Christopher Moreno at: (609) 584-9000 ext 264 Or submit resume online at: Or email to: Please reference #43042NJ3 when responding. Diedre Moire Corporation Education Requirements: High SchoolMinimum Experience Requirements: 2-5 yearsJob City Location: BayonneJob State Location: NJJob Country Location: USASalary Range: $80,000 to $140,000 Diedre Moire Corporation, Inc. diedremoire.com WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain Extrusion Blow Molding Injection Blow Molding or Injection Stretch Blow Molding Equipment Extruders Injection Molder Blow Molders Screw Plasticizers Screw Rotating Motors Guide Rails Moving Platens Heater Bands Hydraulic Pumping Systems Pneumatic systems Die Heads Dies Molds Mold Clamps Cold and Hot Cutters Blow Pins Control Panels Instrumentation Motion Controllers Motors Actuators Sensors Pumps Valves Gearboxes Cooling Fans Heating Bands #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #fieldservicejobs #technicianjobs #MaintenanceMechanicJobs #PlasticJobs #BlowMoldingJobs DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove"" in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call (609) 584-5499

Job Description Electrical Engineer – Iselin, NJ Direct Hire/ Permanent Placement $90k – $150k Base, 1st year onsite and then hybrid schedule, Full benefits, 401k THE CLIENT Multi-disciplinary Engineering Consultancy with their hands in numerous fields and building types: Residential, Commercial, Healthcare, Mission Critical, K-12, Higher Ed, Restaurant, Warehouse, etc. ROLE/ RESPONSIBILITIES/ SKILLS/ EXPERIENCE • Electrical design of power distribution, lighting, fire alarm in accordance to NEC codes and standards, • Electrical equipment calcs, selection, and layout of switchgear, transformers, electrical panels and emergency generators, • Large scale and Complex building projects, • Project Management, • Site visits, Site Surveys, respond to RFIs, and reviewing shop drawings, • Revit, AutoCAD, SKM, COMCheck, AGI 32, • Degreed BSEE BSAE or equivalent, • EIT, PE, LEED Preferred, • 3+ years of relevant experience • No Sponsorship available

Job Description Patuxent Engineering, LLC is seeking a Senior Structural Engineer for our NYC/NJ Office located in Metuchen,NJ. Ideal candidate should have relevant experience in concrete, steel, and foundation design, as well as Mechanical Methods. Patuxent Engineering, LLC provides construction engineering and support services in the high rise building industries and heavy construction industry. Our services include temporary structures, shores, SOE, Existing Structure Stability evaluations, as well as material and personnel vertical transportation solutions, worker access solutions, heavy equipment applications as well as means and methods. Preferred candidate PE or Pending PE(EIT). Please attach a cover letter, resume, and list your salary requirements when responding with contact information.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Company parties, • Competitive salary, • Free food & snacks, • Health insurance Ideal candidate should possess the following: • Relevant experience in the industry (preferred at least a couple of years of work experience)., • Interest in concrete, steel, and foundation design, as well as Mechanical means and Methods for construction., • Experience with working with a team in a fast-paced environment and handle multiple projects and deadlines at once., • Working independently with little to no supervision while also providing communication internally with peers as well as external communication with clients. Additionally, Interested candidates should have experience with drafting software (AUTOCAD 2d/3d), Structural analysis software, (RISA preferred) , Solid Modeling software (Inventor), math programs, etc. Familiarity with structural steel design codes (LRFD / ASD), Wind / Seismic Codes, and or NYC Building Codes would be a bonus. Company Overview Patuxent Engineering, LLC provides construction engineering and support services in the high-rise building industries and heavy construction industry. Our services include temporary structures, shores, SOE, Existing Structure Stability evaluations, as well as material and personnel vertical transportation solutions, worker access solutions, heavy equipment applications as well as means and methods. Please attach a cover letter, resume, and list your salary requirements when responding with contact information.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Competitive salary, • Free food & snacks, • Opportunity for advancement The ideal candidate should have 4-6 years relevant experience working with steel and concrete. Candidate should also be a self starter with the ability to network with industry to create portfolio of clients/projects. The candidate must be comfortable with full analysis and design of building components/stability. Candidate must be proficient and competent with steel, engineering codes (AISC, IBC, ACI, OSHA, ASTM, Chapter 33 NYC Building Code), connections, footings, support of excavation, concrete, floor system/underpinning, etc. Additional preferences for candidates include a Professional Engineer license (please list all applicable states) and/or someone working under a PE and/or working towards a Professional Engineer License. Please attach resume and cover letter as well as list any projects completed that are related to this type of work. Salary is flexible based on experience in industry and knowledge

Job Description Why Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role The National Senior Sales Engineer is responsible for developing and executing the company's sales strategy to achieve revenue and growth targets. This role involves managing Turtle’s national customer’s expectations by working with the national account managers and the national project managers by providing quotes, bill of materials, and solutions while setting sales goals, driving revenue growth, and ensuring the sales team's alignment with the company's overall objectives. What You'll Do: • Sales Strategy and Planning:, • Develop and implement a comprehensive sales strategy in alignment with the company's business objectives., • Set clear and measurable sales targets, both short-term and long-term, and create actionable plans to achieve them., • Monitor market trends, competitor activities, and customer feedback to adapt the sales strategy as needed., • Review and understand the Project Engineering contract documents., • Read and interpret SLD, data sheet, specifications and other project-related documents such as building layout, equipment plan view, and electrical schematics., • Provide value engineered solutions tailored to the customers’ design intent., • Support all BESS projects nationally., • Team Leadership and Management:, • Foster a culture of accountability, collaboration, and continuous improvement within the sales department., • Mentors junior Engineers, switchgear specialists and project managers, • Revenue Generation:, • Drive revenue growth by identifying new business opportunities, expanding market reach, and maximizing sales to existing customers., • Develop and nurture relationships with key clients and partners to secure strategic accounts and partnerships., • Monitor sales performance and implement corrective actions when necessary to meet or exceed revenue targets., • Sales Operations:, • Oversee all aspects of sales operations, including forecasting, pipeline management, and sales reporting., • Collaborate with other departments, such as marketing and product development, to ensure product market fit and effective sales strategies., • Implement and manage sales technologies and tools to optimize sales processes and efficiency., • Budget Management:, • Develop and manage the project budget while allocating resources to effectively support sales objectives., • Bachelor’s degree in electrical engineering (Master's degree preferred)., • Professional Engineering membership, P. Eng or P.E, is preferred, • Proven track record of successful sales leadership with a minimum of [5] years of experience in sales management and [5] years in a senior leadership role., • Strong understanding of sales strategies, market dynamics, and industry trends., • Exceptional communication, negotiation, and presentation skills., • Proficiency in sales management software and CRM systems., • Ability to analyze data and make data-driven decisions., • Excellent leadership and team-building abilities., • Demonstrated ability to meet and exceed sales targets. We offer a competitive benefits package that includes: • 401(k) plan, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid holidays, • Vacation Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website or our LinkedIn: @Turtle. Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

A company is looking for a Nuclear Mechanical Design Engineer to support the design development of reactor core components and structures. Mechanical Engineering or equivalent (preferred) Minimum of 5 years of equipment/component design experience Proficiency in 3D CAD, preferably SolidWorks Stro

As a CBRE Union Assistant Data Center Chief Engineer, you will guide operations, vendors, and subcontractors to maintain and repair buildings, industrial systems, vehicles, equipment, and grounds.This job is part of the Engineering and Technical Services job function.They are responsible for providi

Job Description Are you an experienced Residential Property Director ready to join our fantastic team of professionals? MMS Group is on the hunt for someone like YOU! We are currently seeking an experienced Residential Property Engineer for our Newark, NJ portfolio of properties. The Residential Property Engineer will be responsible for overseeing maintenance operations. Duties and Responsibilities: • Conduct routine inspections and maintenance of HVAC, plumbing, heating, boilers, water tower, and other building systems to ensure functionality and efficiency., • Monitor the BMS to ensure routing functionality and energy efficiency., • Supervise and direct a team of maintenance staff, providing guidance, training, and support as needed., • Manage and prioritize service requests and preventive maintenance tasks through property maintenance software., • Respond promptly to emergency maintenance requests and issues., • Coordinate with external contractors and vendors for specialized repairs and services., • Ensure compliance with all safety protocols, building codes, routine city inspections (such as elevator and sprinkler), and regulations., • Maintain accurate records of maintenance and repair activities., • Maintain a list of seasonal maintenance requirements for various equipment, such as heating boilers, hot water boilers, and PTAC., • Maintain accurate records of As-Built drawings and locations of shut off and valves, clean outs, power down switches, and disconnect., • Maintain and control all keys and fobs related to operation of the building., • Maintain accurate records (hardcopy and electronic copy) of the Operation Manual, warranty book, and list of contractors and vendors. Thorough understanding of the cleaning requirement for the newly installed finished products and equipment., • Minimum high school education or equivalent, • Relevant certifications in HVAC, plumbing, or other related fields or ability to acquire them., • Proven experience (7-10 years) in a supervisory role within property management, with a focus on residential properties., • Strong technical skills in HVAC systems, plumbing, heating, boilers, BMS, water tower, electrical switch gear, elevator, fire protection, security system and general maintenance., • Ability to effectively supervise and lead a team, fostering a positive work environment, • Proficiency in using property management software for service requests and maintenance tracking., • Excellent communication and interpersonal skills., • Ability to work independently and make sound decisions under pressure., • Availability for on-call and emergency situations as required. About Us: For fifty years, MMS Group and its affiliates (Arco Management and TUC Management) have been dedicated to quality property management. Our growing portfolio exceeds 40,000 residential units and includes affordable housing cooperatives, subsidized rental properties, supportive housing, and conventional apartment buildings. Our clients include progressive building owners, governmental agencies, real estate entrepreneurs, financiers, not-for-profit organizations, and cooperative and condominium boards. While each community and client are unique, each share our singular commitment to excellence. Why join our Team? We invite you to join our growing team of dedicated professionals in a high-tech environment. We offer competitive salaries, benefits, and opportunities for growth and advancement through continuous training and education programs. ?Contact us today to see how you can achieve your MMS Edge. Perks and Benefits: MMS Group believes in a healthy work-life balance. Keeping our employees in mind, here is a list of a few benefits we offer: * Paid Holidays: 12 paid holidays per year. * Paid Time-Off: Up to 2 weeks PTO in the first year, increasing with tenure. * Healthcare Plans: Comprehensive Medical, Dental, and Vision plans available after 60 days of employment. * Health Reimbursement Account: Up to $3K per calendar year. * Life Insurance: Company-paid life insurance. * Retirement Savings: Company-matched 401(k) retirement savings plan. * Certifications and Licensing: Company-paid certifications and licensing. * And much more! Are you the person we’re looking for? Apply now. Visit us at for more details! Equal Opportunity Employer

Adjusts steam burning boiler drafts and maintains proper combustion, pressure and water levels in boilers. Assists the marine engineer in the operation, maintenance and repair of motor ferry operation, auxiliary and related equipment, and makes manual repairs on boilers and boiler auxiliaries under

Job Description The Opportunity We’re expanding and as our business grows and our product range broadens, we’ve found it necessary to make significant investments in our organization. Similarly, we’re investing in our people and are looking for someone who’s personally supportive of our customers and equally driven to deliver exceptional products for our market. We are looking for an experienced, detail oriented, individual who's ready to take on challenges head first. The maintenance and improvement facility and equipment is central to our ability to create, produce and deliver at the level required by our customers. We need team members who thrive on seeing every part of the operation perform at its peak. Job Responsibilities • Perform routine maintenance and repairs on various equipment including sewing machines, CNC machines, pneumatic presses, hydraulic presses, etc., • Coordinate and communicate with machine and parts vendors, • Identify and keep inventory of critical spare parts for key production equipment, • Implement maintenance schedule for production equipment to prevent unplanned downtime, • Maintain accurate maintenance records and files related to the equipment, • Conduct repairs and implement improvements around the facility, • 5 years experience in a maintenance or mechanic role, • Demonstrated ability to work safely and independently in an industrial environment, • General plumbing and electrical knowledge, • Good ability to communicate and collaborate with internal team members and external resources, • Should have:, • advanced carpentry, machining, welding, plumbing, electrical, or fabrication skills, • experience with sewing machines, • experience with CNC machines

Job DescriptionJoin the team at New Jersey’s largest wine and spirits distributor! At Allied Beverage Group, we’re proud of our dynamic, family-based culture and our role in keeping the beverage industry moving. If you're looking for a great company with great people—this is the place to be! Overview The Asst. Manager is a key leader position in the distribution and operations organization reporting directly to the Night Manager. Requires strong interpersonal and communication skills as well as knowledge of warehouse operations to include inventory control, shipping and receiving operations in a Direct Sales organization. Preference for warehouse automation experience and union environment is a plus but not required. Asst. Manager directs the night to night aspects of operations, ensuring the highest level of customer service from the warehouse to customers while improving productivity through continuous improvement in fill rate, throughput and cost. Responsibilities Planning:- Ability to identify and plan for staffing requirements based on knowledge of warehousing and distribution operations.- Has the ability to make decisions based on experience in shipping, receiving and inventory control.- Ensures that procedures and processes match requirements of the operation.- Capability to train and implement new technology and processes while maintaining productivity.Building an Inclusive Culture:- Individual and collective accountability, reward and recognition programs, communication designed to develop the frontline employees and build a desirable place to work.Continuous Improvement:- Development and Implementation with the management team and frontline of correct standard operating procedures and performance-based metrics in order to drive results through continuous improvement programs such as lean six sigmaCollaboration:- Partnering with Night and Day operation manager, delivery and Maintenance functions to identify areas of opportunities for improvements to fill rate, throughput, and reduction of cost.Safety:- Direct programs to ensure the safety of all personnel, equipment and property.- Provide safety instruction to personnel as needed. - Report all work-related injuries immediately.- Provide immediate medical attention to injured employees as necessary.- Ensure compliance with appropriate government regulations. Qualifications • Bachelor’s Degree ( Logistics management, Mechanical engineer, or Business Management, • 5-7 years of supervision level experience within a distribution warehouse, • Operational supervision experience, • Distribution of product experience, • Preferred warehouse automation experience, • Functional system understanding in WMS, Microsoft Office, Excel, PowerPoint; strong communication skills The Company is dedicated to ensuring a safe and secure environment for our team members and visitors. To assist in achieving that goal, we conduct a drug and background check for all new team members post-offer and prior to the start of employment. The Immigration Reform and Control Act requires that verification of employment eligibility be documented for all new employees by the end of the third day of work. Allied Beverage Group participates in the E-Verify program to confirm employment eligibility of all new hires in the United States. EEO and AI Disclosure Statement Allied Beverage Group is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, genetic information, or any other legally protected characteristics. As part of our recruitment process, Allied Beverage Group uses artificial intelligence (AI) tools to support the initial review of applications. These tools are designed to assist our recruiters in identifying qualifications and experience that align with the requirements of each role. The tools do not make hiring decisions. All final decisions are made by our recruitment team and hiring managers. We are committed to fair and equitable hiring practices. If you have questions about this process or need an accommodation, please contact Human Resources. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: KSE is a mid-size construction management and engineering firm ranking in the ENR Top 100 for CM and ENR Top 500 for design services. With seven offices across four states (NY, NJ, PA and CT), the firm has been providing transportation and public infrastructure construction services for more than three and half decades. KSE offers a range of employee benefits, including Medical/Dental/Vision insurance, 401k, Long & Short term Disability. Position - Junior Civil Engineer, Newark, NJ Hours: 9:00 a.m. – 5:00 p.m., 40 hrs/week Duties: • Utilize advanced knowledge of the theory and practice of structural and civil engineering,, • construction materials, engineering design and relevant regulatory requirements., • Conduct safety inspections of bridges and other structures., • Perform inspections using various advanced testing methods, mechanized access, • machinery, climbing or diving equipment, and drones or sonar scanning devices., • Perform additional structural assessment-related duties as assigned or required., • Prepare detailed technical reports supported by engineering drawings to address among others, design deficiencies or environmental deterioration, and recommend specific remedial actions., • Master’s degree in civil engineering Salary, Hours & Benefits: • $100,131/Year, 9am-5 pm, 40 hrs/wk., • Medical/Dental/Vision ins.401k Long & Short term Disability KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.