Equipment engineer jobs in White Plains, New YorkCreate job alerts

The NewYork Power Authority is a dynamic organization known for our innovative projects and collaborative work environment and are passionate about developing and delivering sustainable infrastructure solutions. The Engineering team is looking for a Mechanical Engineer II to play an important role in the design, planning and implementation of energy infrastructure projects. The successful candidate will manage engineering work tasks primarily related to power generation facilities. This includes project roles both independently and collaboratively leading research, design, and commissioning activities focused on improving NYPA's energy services. The successful candidate will ensure code compliance, quality assurance and control, cost, safety, reliability, schedule timeliness, and performance throughout all activities and deliverables. To deliver a successful project outcome, the successful candidate will analyze the design effectiveness and functional reliability of projects. The successful candidate will be part of the team responsible for implementing decarbonization, energy efficiency and clean energy technology projects at NYPA facilities related to mechanical infrastructure including rotational, thermal and fluid, refrigeration, fire protection, and process systems. The successful candidate will demonstrate experience with feasibility evaluations, designing, permitting, cost benefit analysis, construction, and commissioning of complex interdisciplinary mechanical energy efficiency projects in urban and rural environments. • Provide lead engineer function in support of a wide range of design modification projects, equipment applications and failure research, engineering studies, and operations and maintenance activities., • Perform site visits to complete field condition assessments, and equipment evaluations and develop technical recommendations with moderate complexity., • Perform occasional emergency response, including outside of normal business hours., • Independently coordinate cross disciplinary activities for the successful development and execution of projects., • Select and apply codes, standards and procedures to work tasks appropriately., • Perform evaluations to ensure engineering requirements and Authority specifications are satisfied., • Provide technical leadership in state-of-the-art engineering and analytical techniques., • Review designs, calculations, specifications, and reports produced by other internal engineers and external consultants., • Provide direction and review for the mechanical design and drafting personnel in the development of project drawings (site-based)., • For assigned work and projects, provide supervision of maintenance department(s) staff, and contractors, and prepare and monitor the day-to-day work activities of the crafts. Work with planners in scheduling work activities; oversee the safety of employees. Review job packages to ensure they are complete and current prior to performance of the work. Review completed work, job packages, and work orders to verify all steps are complete and to ensure that all data/information is recorded., • Proficient in the design, operation and maintenance of mechanical systems specific to the electric utility industry and power system components with projects related to power generating plant and substation facilities (site-based). (site-based), • Working knowledge of mechanical - commercial and industrial facilities and their various systems and components]., • Ability to apply diverse technical principles and practices, with the understanding of the NYPA's policies, operations and objectives, to engineering deliverables., • Working knowledge of applicable codes, standards, regulations., • Strong verbal and written communication skills., • Collaborative and team-oriented with ability to build relationships with vendors and stakeholders., • Ability to coordinate the technical and commercial aspects of projects., • Ability to perform engineering calculations, and complete specifications, scopes of work, reports, and interdisciplinary design packages., • Competent in the use of Microsoft Office applications., • Working experience with a Mechanical design or forecasting software preferred (site-based)., • Ability to effectively manage and prioritize multiple projects., • Proficient in the design, operation and maintenance of , mechanical systems for commercial and industrial facilities and their various systems and components (Customer-based)., • Bachelor of Science Degree in Mechanical Engineering, or equivalent, from an accredited college or university., • Minimum of eight (8+) years of work-related experience., • New York State Engineer in Training certification preferred., • Approximately 10% travel primarily within NY State., • Ability to access all areas of the plant and conduct physical evaluations of grounds and equipment including ability to work at high elevations. Military Occupational Specialty Codes MOS - Army:12A, 12B, 12P, 18C, 24A, 24Z, 51S MOS - Marines:1120, 1302, 1310, 8824, 8831, 8832, 9622, 9624, 9630, 9631, 9632, 9636 MOS- Navy:EA, MME, UT, 2166, 2167, 2170, 2180, 2181, 2740, 4210, 4270, 4280, 5761, 5904, 5913, 5917, 5925, 5927, 5960, 5961, 5970, 5980, 7273 The New York Power Authority is committed to providing fair, competitive, and market-informed compensation. The estimated salary range for this position is: $129,000-$161,100. The salary offered will be determined based on the successful candidates' relevant experience, knowledge, skills, and abilities. The New York Power Authority and Canal Corporation believes that diversity, equity, and inclusion drive our success, and we encourage women, people of color, LGBTQIA+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents and veterans to apply. As an equal opportunity employer, NYPA/Canals is committed to building inclusive, innovative work environments with employees who reflect communities across New York and enthusiastically serve them. We proudly celebrate diversity and do not discriminate based on race/color, creed/religion, national origin, citizenship or immigration status, age, disability, military status, gender/sex, sexual orientation, gender identity/expression, pregnancy and related conditions, familial/marital status, domestic violence victim status, predisposing genetic characteristics, arrest/criminal conviction record or any other category protected by law. NYPA/Canals will also provide reasonable accommodations during the hiring process related to candidates' disabilities, pregnancy-related conditions, religious observances/practices and/or domestic violence concerns. To request an accommodation, please email_.

Leads Hydropower Engineering group, supporting NYPA operations, maintenance, capital project portfolio and regulatory compliance. Ensures coordination of project planning, design execution and emergent project support with the Engineering department, in preparation of design drawings, specifications, calculations. Applies engineering knowledge and technology, industry standards and practices to solve project, operational, or regulatory objectives. This includes deep knowledge and experience of hydropower unit design, operation, upgrades and repairs. • Promote a culture of safety throughout the entire organization., • Lead and manage a centralized engineering team responsible for the engineering of upgrades and major maintenance of mechanical systems at NYPA's power projects, transmission and support facilities or NYPA's Customer Facilities, including approval of engineering designs, calculations and specifications., • Responsible for discipline design authority and serve as engineer of record for all mechanical engineering design drawings and specifications. Provide professional signature and seal and ensure adherence to configuration management policies., • Responsible for the development and maintenance of design and construction standards applicable to NYPA's mechanical systems., • Lead Engineering support for projects to maintain NYPA's position in hydropower and renewable generation projects (NYPA or Customer sites), develop transmission, and leverage new technology to support integration of renewable generation sources., • Perform engineering analyses related to mechanical systems such as, fire protection, generation assets, HVAC, and high energy piping systems., • Oversee engineering consultants in preparation of design, specifications, inspections and evaluations of NYPA's power projects, transmission and support facilities., • Develop equipment and construction specifications (site-based) and associated calculations., • Work closely with other engineering staff or generation facilities (site-based) or customer facilities (customer-based) to develop solutions and responses to customer needs., • Represent the Authority on internal technical committees and at industry conferences committees or task forces., • Develop staff expertise to ensure succession planning and critical core competencies are maintained within NYPA., • Collaborate with other engineering disciplines, site personnel, project management, project development & licensing, emergency management, regulatory agencies, external stakeholders and other business units., • Procure and maintain a depth and breadth of on-call engineering consulting firms who can provide supplemental technical services, develop clear and concise scope of services documents, and ensure timely, high quality designs are delivered within budget., • Perform occasional emergency response, including outside of normal business hours., • Expert knowledge of mechanical engineering related design standards, advanced modeling practices and techniques., • Thorough understanding of IEC, ASME and other codes, standards, regulations, and construction processes within the utility industry., • Strong project collaboration and effective communication skills., • Strong leadership ability and technical background to develop staff and maintain a highly skilled workforce., • Broad knowledge of NYPA's mission, policies and procedures and the interaction and responsibilities of the various NYPA business units., • Ability to produce clear and concise reports, presentations and other documentation., • Ability to apply technical and theoretical knowledge to data and observations, to generate complete solutions using accepted standards., • Strong platform skills and ability to tailor presentation to the technical understanding of any audience., • Ability to respond and adapt to emergent and changing priorities., • Capability to build teams and foster teamwork across departments., • Strong collaboration and negotiation skills to influence senior management, peers, outside policy makers and other NYPA personnel., • Bachelor of Science Degree in Mechanical Engineering, or equivalent, from an accredited college or university. *, • Master's Degree preferred., • Minimum -7 years of applicable mechanical engineering management experience preferred, • Electric utility or related experience., • Licensed Professional Engineer in NYS., • Minimum 3 years' experience managing employees / leading a team., • Approximately 10% travel primarily within NY State., • Ability to access all areas of the plant and conduct physical evaluations of grounds and equipment including ability to work at high elevations Military Occupational Specialty Codes MOS - Army:12A, 12B, 12P, 18C, 24A, 24Z, 51S MOS - Marines:1120, 1302, 1310, 8824, 8831, 8832, 9622, 9624, 9630, 9631, 9632, 9636 MOS- Navy:EA, MME, UT, 2166, 2167, 2170, 2180, 2181, 2740, 4210, 4270, 4280, 5761, 5904, 5913, 5917, 5925, 5927, 5960, 5961, 5970, 5980, 7273 The New York Power Authority is committed to providing fair, competitive, and market-informed compensation. The estimated salary range for this position is: $166,000 - $208,000. The salary offered will be determined based on the successful candidates' relevant experience, knowledge, skills, and abilities. The New York Power Authority and Canal Corporation believes that diversity, equity, and inclusion drive our success, and we encourage women, people of color, LGBTQIA+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents and veterans to apply. As an equal opportunity employer, NYPA/Canals is committed to building inclusive, innovative work environments with employees who reflect communities across New York and enthusiastically serve them. We proudly celebrate diversity and do not discriminate based on race/color, creed/religion, national origin, citizenship or immigration status, age, disability, military status, gender/sex, sexual orientation, gender identity/expression, pregnancy and related conditions, familial/marital status, domestic violence victim status, predisposing genetic characteristics, arrest/criminal conviction record or any other category protected by law. NYPA/Canals will also provide reasonable accommodations during the hiring process related to candidates' disabilities, pregnancy-related conditions, religious observances/practices and/or domestic violence concerns. To request an accommodation, please email_.

Leads engineering, design and development for the Civil and Mechanical Engineering groups. Leads the Civil/Structural, Mechanical, Hydropower and Transmission Engineering groups, supporting NYPA operations, maintenance, capital project portfolio and regulatory compliance. Ensures coordination of project planning, design execution and emergent project support with the Engineering department, in preparation of design drawings, specifications, calculations. Applies engineering knowledge and technology, industry standards and practices to solve project, operational, or regulatory objectives. This includes wide knowledge of utility industry related engineering, operational procedures, practices, skills. Degree(s) in Civil or Mechanical Engineering discipline preferred. • Provide direct oversight and direction of NYPA NERC and NPCC compliance program within Engineering. Accountable for execution of engineering projects, analysis and documentation under NYPA's compliance responsibility program, contributing the reliability of the Bulk Electric System., • Lead technical planning and evaluation for the asset management lifecycle of assets., • Ensure multidiscipline approach to design standards address asset life cycle Reliability, Availability, Maintainability, Safety (RAMS) methodologies and cost targets., • Facilitate and drive collaboration between Engineering disciplines, and other project stakeholders/customers in fostering a project team environment., • Enhance compliance program and adhere strictly to existing procedures to further Reliability Standards program. Ensure processes and prioritization for NYPA's compliance program within Engineering., • Manage employees including performance management, salary administration, succession planning and workload balancing. Identify and recommend solutions to modify staff to meet goals., • Develop staff expertise in engineering areas, create development opportunities within and/or between disciplines and maintain depth at critical core competencies within engineering., • Potential to have a direct role in emergency preparedness, incident management or response and as such will require training in the National Incident Management System (NIMS)., • Responsible for discipline design authority, and serve as engineer of record for engineering design drawings and specifications. Provide professional signature and seal and ensure adherence to configuration management policies., • Subject matter expertise in one or more engineering disciplines related to equipment, systems and structures., • Broad understanding of engineering & design for generation and transmission modifications and upgrades., • Ability to facilitate and drive collaboration among various disciplines., • Broad understanding of project management principles and construction activities., • Broad understanding of equipment and infrastructure planning and asset lifecycle evaluation., • Strong project collaboration and effective communication skills., • Strong leadership ability and technical background to develop staff and maintain a highly skilled workforce., • Ability to respond and adapt to emergent and changing priorities., • Proficient in Microsoft Office, SAP, Maximo, and other platforms as required., • Bachelor of Science Degree in an Engineering discipline or equivalent, from an accredited college or university, • Master of Engineering Degree preferred., • Minimum of ten (10) years of related work experience., • New York State P.E License required, or P.E License from another state, with New York State endorsement within 12 months of start date., • Minimum 3 years of people management experience in the electric utility industry/ electrical construction. Military Occupational Specialty Codes MOS - Army:12A, 12B, 12P, 18C, 24A, 24Z, 51S MOS - Marines:1120, 1302, 1310, 8824, 8831, 8832, 9622, 9624, 9630, 9631, 9632, 9636 MOS- Navy:EA, MME, UT, 2166, 2167, 2170, 2180, 2181, 2740, 4210, 4270, 4280, 5761, 5904, 5913, 5917, 5925, 5927, 5960, 5961, 5970, 5980, 7273 The New York Power Authority is committed to providing fair, competitive, and market-informed compensation. The estimated salary range for this position is: $183,000 - $251,900. The salary offered will be determined based on the successful candidates' relevant experience, knowledge, skills, and abilities. The New York Power Authority and Canal Corporation believes that diversity, equity, and inclusion drive our success, and we encourage women, people of color, LGBTQIA+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents and veterans to apply. As an equal opportunity employer, NYPA/Canals is committed to building inclusive, innovative work environments with employees who reflect communities across New York and enthusiastically serve them. We proudly celebrate diversity and do not discriminate based on race/color, creed/religion, national origin, citizenship or immigration status, age, disability, military status, gender/sex, sexual orientation, gender identity/expression, pregnancy and related conditions, familial/marital status, domestic violence victim status, predisposing genetic characteristics, arrest/criminal conviction record or any other category protected by law. NYPA/Canals will also provide reasonable accommodations during the hiring process related to candidates' disabilities, pregnancy-related conditions, religious observances/practices and/or domestic violence concerns. To request an accommodation, please email_.

Leads research, design, and development activities to improve NYPA's energy services. Designs, constructs, and tests and operates equipment. Ensures that standards of quality, cost, safety, reliability, timeliness and performance are met throughout all engineering activities. Utilizing advanced computer modeling tools, perform short term operational planning and long term transmission system planning through modeling and simulation of the power system to ensure the reliable operation of the existing G&T system, evaluate G&T development opportunities, and support internal and external interconnections. • Understand the operational characteristics of the NYISO Bulk Electric system and provide training to team members., • Excellent understanding of the Load Flow Contingency Analysis, Transfer Limit, and Security-Constrained Dispatch (SCD) analysis using industry leading power system analysis tools, i.e. PSS/e, TARA, • Excellent understanding of the Dynamics analysis of the PSS/e program and independently perform system stability analyses using the PTI PSS/e dynamics program, and accurately assess the results., • Independently conduct analyses of system conditions, system disturbances and system operations to assess system performance., • Independently conduct analyses to assess the electric system improvement., • Independently review technical reports and NYISO planning studies., • Represent the Authority on Regional and State Transmission Planning working groups and task forces to ensure NYPA interests are represented and promoted. Perform, review and coordinate inter-utility analyses., • Provide Technical support to NYPA's customers including Coops and Municipalities., • Perform generator interconnection studies or Operations Planning under the supervision of senior System Planning staff., • Conduct studies for major transmission projects in accordance with applicable reliability standards, criteria and rules under the supervision of senior System Planning staff., • Perform compliance studies to ensure compliance with NERC Reliability Standards, • Prepare detailed technical reports documenting study work conducted, problems and recommendations for internal management as well as for external entities., • Recognize NYISO/NPCC/NERC compliance requirements and address compliance issues as required., • For assigned work and projects, provide supervision of maintenance department(s) staff, and contractors, and prepare and monitor the day-to-day work activities of the crafts. Work with planners in scheduling work activities; oversee the safety of employees. Review job packages to ensure they are complete and current prior to performance of the work. Review completed work, job packages, and work orders to verify all steps are complete and to ensure that all data/information is recorded. Site ECC • Perform emergency response on a 24x7 on-call basis to support ECC., • Knowledge of NYISO, NYSRC, NPCC, and NERC planning and operation practices and reliability requirements., • Significant knowledge of:, • PTI/PSS/e Load Flow and Voltage programs, • PTI/PSS/e Stability program, • TARA programs, • Python programming, • Bulk electric system planning and operation practices, as well as transmission system equipment., • Excellent verbal and written communication skills., • Ability to write clear, concise technical reports and papers., • Ability to provide detailed presentations on technical topics., • Ability to assess System Planning technical problems and provide timely and accurate solutions and recommendations., • Capable of recognizing abnormal data variances in evaluation of technical reports and propose/suggest additional actions for correction., • Strong organizational skills and ability to prioritize work consisting of several projects in order to meet completion schedules., • Demonstrate flexibility in changing project requirements, priorities and assignments., • Bachelor of Science in Electrical & Computer Engineering, required, • Masters of Science in Electrical & Computer Engineering preferred., • Minimum of eight (8) years of work-related experience or an equivalent combination of education and experience., • New York State Engineer in Training certification preferred., • Ability to pass EIT and work towards PE license., • Experience in steady state, short circuit and dynamic modelling of inverter-based resources, and composite load models is preferred., • Ability to sit for prolonged periods of time, use a keyboard and enter data, view monitors for prolonged periods of time;, • Ability to travel by auto, train, airplane to other destinations to attend meetings., • Site ECC: Must be able to provide 24/7 on-call support to ECC. Military Occupational Specialty Codes MOS - Army:12A, 12B, 12P, 18C, 24A, 24Z, 51S MOS - Marines:1120, 1302, 1310, 8824, 8831, 8832, 9622, 9624, 9630, 9631, 9632, 9636 MOS- Navy:EA, MME, UT, 2166, 2167, 2170, 2180, 2181, 2740, 4210, 4270, 4280, 5761, 5904, 5913, 5917, 5925, 5927, 5960, 5961, 5970, 5980, 7273 The New York Power Authority is committed to providing fair, competitive, and market-informed compensation. The estimated salary range for this position is: $129,000-$177,100. The salary offered will be determined based on the successful candidates' relevant experience, knowledge, skills, and abilities. The New York Power Authority and Canal Corporation believes that diversity, equity, and inclusion drive our success, and we encourage women, people of color, LGBTQIA+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents and veterans to apply. As an equal opportunity employer, NYPA/Canals is committed to building inclusive, innovative work environments with employees who reflect communities across New York and enthusiastically serve them. We proudly celebrate diversity and do not discriminate based on race/color, creed/religion, national origin, citizenship or immigration status, age, disability, military status, gender/sex, sexual orientation, gender identity/expression, pregnancy and related conditions, familial/marital status, domestic violence victim status, predisposing genetic characteristics, arrest/criminal conviction record or any other category protected by law. NYPA/Canals will also provide reasonable accommodations during the hiring process related to candidates' disabilities, pregnancy-related conditions, religious observances/practices and/or domestic violence concerns. To request an accommodation, please email_.

This role will primarily support the project management of utility-scale solar PV projects across the state. A solid understanding of solar energy systems, including photovoltaic (PV) technology, energy storage solutions, and grid integration, is preferred. Organizes project teams, assigns individual responsibilities, developing project schedules, and determines resource requirements. Monitors and reports on the status of projects including cost, timing, and stang. Ensures adherence to internal and external quality standards. Roles include those for technical project/program activities, in which the NYPA employee has foundational knowledge in the specic area to advise on scope changes, and other more technical aspects. Management of complex engineering projects, including management of personnel, safety, quality, scope, schedule, and budget to deliver a successful project outcome. • Responsible for Project Management for all stages of the project lifecycle from initiation through close out for projects and/or programs and ensuring deliverables are received incompliance with schedule. Responsibilities and tasks require some support and guidance from higher-lever Project Engineer(s) or manager. Under general supervision will own small to medium sized projects. Manage and implement multiple projects and modifications concurrently., • Partner and coordinate with all in-house as well as external resources for all activities related to the project., • Ensure applicable licensing, environmental, permitting, safety, code compliance, construction, and requirements/input of all project stakeholders is incorporated into the project especially during initiation through design phase of the project., • Develop & manage design documents/specifications, project presentations, Trustee Items, project funding requests, budgets, forecasts, bid documents, evaluate bid proposals, and make award recommendations, with guidance from higher-level Project Engineer and/or Project Manager, • Partner with Construction Engineers, Engineering, Customers or Service Providers in developing/negotiating contract change orders, preparing invoices and coordinating construction sequencing and site outages, coordinate all field & design changes and quality testing/inspections., • Review and contribute to all project documentation including drawings, technical specifications, assessment reports, asset and risk registry, budgets, forecasts, invoices, schedules, variances, etc. for the project., • Perform occasional emergency response, including outside of normal business hours., • For assigned work and projects, provide supervision of maintenance department(s) staff, and contractors, and prepare and monitor the day-to-day work activities of the crafts. Work with planners in scheduling work activities; oversee the safety of employees. Review job packages to ensure they are complete and current prior to performance of the work. Review completed work, job packages, and work orders to verify all steps are complete and to ensure that all data/information is recorded., • Basic competency in project management of electrical, mechanical, structural and/or water projects specific to the electric utility, canal/waterways, building systems, distributed energy resource and/or electric vehicle industries., • Collaborative and team-oriented with ability to build relationships with vendors and stakeholders., • Ability to develop project plans, timelines, and work schedules as well as coordinate among customers, contractors, permitting agencies, etc., • Familiarity with applicable codes, standards, regulations, project budgets, costs, project management software and NYPA external stakeholders., • Ability to perform basic engineering calculations, and adapt standard specifications, scopes of work, reports, and design packages to specific projects., • Bachelor's Degree in Civil, Mechanical, Electrical Engineering or Energy Engineering or related field., • Minimum of 2 years of experience preferred in Project / Construction Management, preferably in the utility, commercial or related mechanical/electrical industries., • New York State Engineer in Training (EIT) certification or ability to get one within 2 years preferred., • Approximately 25% travel primarily within NY State, • Willingness to enter confined spaces and climb/scale power system apparatuses., • Ability to travel to vendor facilities (worldwide) to support construction activities and to inspect equipment fabrication and commissioning for length of time needed., • Availability to work outside of normal business hours (including weekends) when project demands. Military Occupational Specialty Codes MOS - Army:12A, 12B, 12P, 18C, 24A, 24Z, 51S MOS - Marines:1120, 1302, 1310, 8824, 8831, 8832, 9622, 9624, 9630, 9631, 9632, 9636 MOS- Navy:EA, MME, UT, 2166, 2167, 2170, 2180, 2181, 2740, 4210, 4270, 4280, 5761, 5904, 5913, 5917, 5925, 5927, 5960, 5961, 5970, 5980, 7273 The New York Power Authority is committed to providing fair, competitive, and market-informed compensation. The estimated salary range for this position is: $92,000 - $115,000. The salary offered will be determined based on the successful candidates' relevant experience, knowledge, skills, and abilities. The New York Power Authority and Canal Corporation believes that diversity, equity, and inclusion drive our success, and we encourage women, people of color, LGBTQIA+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents and veterans to apply. As an equal opportunity employer, NYPA/Canals is committed to building inclusive, innovative work environments with employees who reflect communities across New York and enthusiastically serve them. We proudly celebrate diversity and do not discriminate based on race/color, creed/religion, national origin, citizenship or immigration status, age, disability, military status, gender/sex, sexual orientation, gender identity/expression, pregnancy and related conditions, familial/marital status, domestic violence victim status, predisposing genetic characteristics, arrest/criminal conviction record or any other category protected by law. NYPA/Canals will also provide reasonable accommodations during the hiring process related to candidates' disabilities, pregnancy-related conditions, religious observances/practices and/or domestic violence concerns. To request an accommodation, please email_.

New York Power Authority's Project Delivery division is seeking a Project Engineer to join their Waterway Infrastructure team, supporting the revitalization of the New York State Canal System. The candidate will have a meaningful role with a high degree of accountability for leading and executing revitalization projects, transforming the Erie Canal for the benefit of its communities. Projects will include replacement of water control structures, rehabilitation of earthen and mechanical dams, and the creation of public recreational spaces along the Canal front. The duration of a provisional position is not to exceed three years but is subject to change based on performance and business needs. Provisional employees are eligible for: a range of benefits customized to your individual and family needs such as medical, dental, vision, flexible spending accounts, a retirement plan, 401(k)plan, employee assistance program, vacation, sick time, holidays, medical and parental leave. • Responsible for Project Management for all stages of the project lifecycle from initiation through close out for highly complex projects and/or programs and ensuring deliverables are received incompliance with schedule. Should be able to work independently with minimal support from higher-lever Project Engineer(s) or manager. Under administrative supervision will own large sized projects. Manage and implement multiple projects and modifications concurrently, • Oversee and coordinate all in-house as well as external resources for all activities related to the project., • Ensure applicable licensing, environmental, permitting, safety, code compliance, construction, and requirements/input of all project stakeholders is incorporated into the project especially during initiation through design phase of the project., • Develop & manage design documents/specifications, project presentations, Trustee Items, project funding requests, budgets, forecasts, bid documents, evaluate bid proposals, and make award recommendations., • Partner with Construction Engineers, Engineering, Customers or Service Providers in developing/negotiating contract change orders, preparing invoices and coordinating construction sequencing and site outages, coordinate all field & design changes and quality testing/inspections., • Review and contribute to all project documentation including drawings, technical specifications, assessment reports, asset and risk registry, budgets, forecasts, invoices, schedules, variances, etc. for the project., • Perform occasional emergency response, including outside of normal business hours., • Support and guide/mentor lower-level Project Engineer(s)., • Proficient in project management of electrical, mechanical, structural and/or water projects specific to the electric utility, canal/waterways, building systems, distributed energy resource and/or electric vehicle industries., • Proven success in the management of technical and commercial aspects of large projects and programs., • Collaborative and team-oriented with ability to build relationships with vendors and stakeholders, • Ability to develop project plans, timelines, and work schedules as well as coordinate among customers, contractors, permitting agencies, etc., • Significant experience with applicable codes, standards, regulations, project budgets, costs, project management software and NYPA external stakeholders., • Ability to perform engineering calculations, and complete specifications, scopes of work, reports, and interdisciplinary design packages., • Bachelor's Degree in Civil, Mechanical, Electrical Engineering or Energy Engineering or related field., • Minimum of 6 years' experience including a minimum of 3 years of experience preferred in Project / Construction Management, preferably in the utility, commercial or related mechanical/electrical industries., • One or more of the following preferred:, • New York State Engineer in Training (EIT) certification, • Project Management Professional certification or ability to obtain within 2 years., • Design Build Institute of America certification or ability to obtain within 2 years., • Certified Construction Manager (CCM), • Certified Energy Manager (CEM) certification, • Approximately 25% travel primarily within NY State, • Willingness to enter confined spaces and climb/scale power system apparatuses., • Ability to travel to vendor facilities (worldwide) to support construction activities and to inspect equipment fabrication and commissioning for length of time needed., • Availability to work outside of normal business hours (including weekends) when project demands. Military Occupational Specialty Codes MOS - Army:12A, 12B, 12P, 18C, 24A, 24Z, 51S MOS - Marines:1120, 1302, 1310, 8824, 8831, 8832, 9622, 9624, 9630, 9631, 9632, 9636 MOS- Navy:EA, MME, UT, 2166, 2167, 2170, 2180, 2181, 2740, 4210, 4270, 4280, 5761, 5904, 5913, 5917, 5925, 5927, 5960, 5961, 5970, 5980, 7273 The New York Power Authority is committed to providing fair, competitive, and market-informed compensation. The estimated salary range for this position in the (specify downstate location) is: $120,000 - $155,000 and $104,000 - $135,000 for this position in the (specify upstate location). The New York Power Authority and Canal Corporation believes that diversity, equity, and inclusion drive our success, and we encourage women, people of color, LGBTQIA+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents and veterans to apply. As an equal opportunity employer, NYPA/Canals is committed to building inclusive, innovative work environments with employees who reflect communities across New York and enthusiastically serve them. We proudly celebrate diversity and do not discriminate based on race/color, creed/religion, national origin, citizenship or immigration status, age, disability, military status, gender/sex, sexual orientation, gender identity/expression, pregnancy and related conditions, familial/marital status, domestic violence victim status, predisposing genetic characteristics, arrest/criminal conviction record or any other category protected by law. NYPA/Canals will also provide reasonable accommodations during the hiring process related to candidates' disabilities, pregnancy-related conditions, religious observances/practices and/or domestic violence concerns. To request an accommodation, please email_.

We are seeking a Protection and Control Engineer to develop design solutions for NYPA's protection, control, and associated communication systems. Responsibilities include performing system disturbance analysis, recommending protective relaying system enhancements or modifications, and ensuring compliance with applicable North American Electric Reliability Corporation (NERC) standards to maintain the reliable operation of NYPA assets. • Provide lead engineer function in support of a wide range of design modification projects, equipment applications and failure research, engineering studies, and operations and maintenance activities., • Perform site visits to complete field inspections, condition assessments, and equipment evaluations and develop technical recommendations with moderate complexity., • Perform occasional emergency response, including outside of normal business hours., • Independently coordinate cross disciplinary activities for the successful development and execution of projects., • Select and apply codes, standards, and procedures to work tasks appropriately., • Perform inspections and evaluations to ensure engineering requirements and Authority specifications are satisfied., • Provide technical leadership in state-of-the-art engineering and analytical techniques., • Review designs, calculations, specifications, and reports produced by other internal engineers and external consultants., • Provide direction and review for the electrical design and drafting personnel in the development of project drawings., • Perform engineering design for the protection and control and associated communication systems for the Authority system (through both complete in-house designs and submittal of protection criteria)., • Perform special short circuit studies and other complex calculations as required to establish relay settings utilizing sophisticated software analysis programs., • Prepare specifications for purchasing protection and communication equipment and instrument transformer devices., • Evaluate bid proposals and provide technical recommendations for awards of bids., • Perform system disturbance analysis and recommend protective relaying system modification and/or additions, if required., • Review existing NYPA protective relay settings to ensure proper relay coordination margin and recommend relay setting changes if required., • Interface with manufacturers, consultants, professional organizations, regulatory and standardizing bodies to maintain familiarity with and stay conversant with the requirements of power system protection and control., • For assigned work and projects, provide supervision of maintenance department(s) staff, and contractors, and prepare and monitor the day-to-day work activities of the crafts. Work with planners in scheduling work activities; oversee the safety of employees. Review job packages to ensure they are complete and current prior to performance of the work. Review completed work, job packages, and work orders to verify all steps are complete and to ensure that all data/information is recorded., • Proficient in the design, operation, and maintenance of Protection and Control systems specific to the electric utility industry., • Working knowledge of protective relaying systems and their various components., • Ability to utilize communication systems including power line carrier, leased telephone circuits, microwave links and fiber optic technology to develop protective relaying systems., • Ability to apply diverse technical principles and practices, with the understanding of the NYPA's policies, operations, and objectives, to engineering deliverables., • Working knowledge of applicable codes, standards, regulations., • Strong verbal and written communication skills., • Collaborative and team-oriented with ability to build relationships with vendors and stakeholders., • Ability to coordinate the technical and commercial aspects of projects., • Ability to perform engineering calculations, complete specifications, scopes of work, reports, and interdisciplinary design packages., • Competent in the use of Microsoft Office applications., • Working experience with engineering software such as ASPEN and relay manufacturing software preferred., • Ability to effectively manage and prioritize multiple projects., • Ability to organize state-of-the-art microprocessor-based digital transient recorders and integrated sequence-of-event recorders in complex monitoring and logging systems to provide the necessary information for system performance analysis., • Ability to develop complex engineering specifications and perform more intricate studies., • Bachelor of Science Degree in Electrical Engineering, or equivalent, from an accredited college or university., • Minimum of six (6) years of related work experience preferred., • Experience in Protective Relaying applied to Electrical Power Systems required., • New York State Engineer in Training certification preferred. Approximately 25% travel primarily within NY State. Military Occupational Specialty Codes MOS - Army:12A, 12B, 12P, 18C, 24A, 24Z, 51S MOS - Marines:1120, 1302, 1310, 8824, 8831, 8832, 9622, 9624, 9630, 9631, 9632, 9636 MOS- Navy:EA, MME, UT, 2166, 2167, 2170, 2180, 2181, 2740, 4210, 4270, 4280, 5761, 5904, 5913, 5917, 5925, 5927, 5960, 5961, 5970, 5980, 7273 The New York Power Authority is committed to providing fair, competitive, and market-informed compensation. The estimated salary range for this position is: $120,000-$145,000. The salary offered will be determined based on the successful candidates' relevant experience, knowledge, skills, and abilities. The New York Power Authority and Canal Corporation believes that diversity, equity, and inclusion drive our success, and we encourage women, people of color, LGBTQIA+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents and veterans to apply. As an equal opportunity employer, NYPA/Canals is committed to building inclusive, innovative work environments with employees who reflect communities across New York and enthusiastically serve them. We proudly celebrate diversity and do not discriminate based on race/color, creed/religion, national origin, citizenship or immigration status, age, disability, military status, gender/sex, sexual orientation, gender identity/expression, pregnancy and related conditions, familial/marital status, domestic violence victim status, predisposing genetic characteristics, arrest/criminal conviction record or any other category protected by law. NYPA/Canals will also provide reasonable accommodations during the hiring process related to candidates' disabilities, pregnancy-related conditions, religious observances/practices and/or domestic violence concerns. To request an accommodation, please email_.

Leads research, design, and development activities to improve NYPA's energy services. Designs, constructs, and tests and operates equipment. Ensures that standards of quality, cost, safety, reliability, timeliness and performance are met throughout all engineering activities. Utilizing advanced computer modeling tools, perform short term operational planning and long term transmission system planning through modeling and simulation of the power system to ensure the reliable operation of the existing G&T system, evaluate G&T development opportunities, and support internal and external interconnections. • Understand the operational characteristics of the NYISO Bulk Power Electric system, • Excellent understanding of the Load Flow and Voltage analysis., • Perform basic system stability analyses., • Conduct analyses of system conditions, system disturbances and system operations in order to assess system performance with only minimal guidance from System Planning senior staff., • Independently conduct analyses to assess the electric system improvement programs., • Perform generator interconnection studies or Operations Planning studies under the supervision of senior System Planning staff., • Conduct studies to conform with NYISO rules for the connection of major projects to the NYCA bulk power transmission system under the supervision of senior System Planning staff., • Independently review technical reports and NYISO planning studies., • Represent the Authority on State System Planning working groups and task forces to ensure NYPA interests are represented and promoted. Perform and review and inter-utility analyses., • Prepare detailed technical reports documenting study work conducted, problems and recommendations., • Recognize NYISO/NPCC/NERC compliance requirements and address compliance issues as required., • For assigned work and projects, provide supervision of maintenance department(s) staff, and contractors, and prepare and monitor the day-to-day work activities of the crafts. Work with planners in scheduling work activities; oversee the safety of employees. Review job packages to ensure they are complete and current prior to performance of the work. Review completed work, job packages, and work orders to verify all steps are complete and to ensure that all data/information is recorded. Site ECC • Perform emergency response on a 24x7 on-call basis to support ECC., • Knowledge of NYPA Transmission Business Unit, NYISO, NYSRC, NPCC, and NERC planning and operation practices and reliability requirements., • Significant knowledge of PTI/PSS/e Load Flow and Voltage programs and PowerGem's TARA program., • Knowledge of Python Programming (desired), • Knowledge of PTI/PSS/e Stability program., • Knowledge of bulk power electric system planning and operation practices, as well as transmission system equipment., • Excellent oral and written communication skills., • Ability to write clear, concise technical reports and papers., • Ability to provide detailed presentations on technical topics., • Ability to assess System Planning technical problems and provide timely and accurate solutions and recommendations., • Capable of recognizing abnormal data variances in evaluation of technical reports and propose/suggest additional actions for correction., • Strong organizational skills and ability to prioritize work consisting of several projects in order to meet completion schedules., • Demonstrate flexibility in changing project requirements, priorities and assignments., • Bachelor of Science in Electrical & Computer Engineering required, • Masters of Science in Electrical & Computer Engineering preferred., • New York State Engineer in Training certification preferred, • Minimum of five (5) years of related work experience or an equivalent combination of education and experience., • Ability to pass EIT and work towards PE license., • Experience in steady state analysis is preferred, • Ability to sit for prolonged periods of time, use a keyboard and enter data, view monitors for prolonged periods of time;, • Ability to travel by auto, train, airplane to other destinations to attend meetings., • Site ECC: Must be able to provide 24/7 on-call support to ECC. Military Occupational Specialty Codes MOS - Army:12A, 12B, 12P, 18C, 24A, 24Z, 51S MOS - Marines:1120, 1302, 1310, 8824, 8831, 8832, 9622, 9624, 9630, 9631, 9632, 9636 MOS- Navy:EA, MME, UT, 2166, 2167, 2170, 2180, 2181, 2740, 4210, 4270, 4280, 5761, 5904, 5913, 5917, 5925, 5927, 5960, 5961, 5970, 5980, 7273 The New York Power Authority is committed to providing fair, competitive, and market-informed compensation. The estimated salary range for this position is: $110,000-$150,700. The salary offered will be determined based on the successful candidates' relevant experience, knowledge, skills, and abilities. The New York Power Authority and Canal Corporation believes that diversity, equity, and inclusion drive our success, and we encourage women, people of color, LGBTQIA+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents and veterans to apply. As an equal opportunity employer, NYPA/Canals is committed to building inclusive, innovative work environments with employees who reflect communities across New York and enthusiastically serve them. We proudly celebrate diversity and do not discriminate based on race/color, creed/religion, national origin, citizenship or immigration status, age, disability, military status, gender/sex, sexual orientation, gender identity/expression, pregnancy and related conditions, familial/marital status, domestic violence victim status, predisposing genetic characteristics, arrest/criminal conviction record or any other category protected by law. NYPA/Canals will also provide reasonable accommodations during the hiring process related to candidates' disabilities, pregnancy-related conditions, religious observances/practices and/or domestic violence concerns. To request an accommodation, please email_.

Job DescriptionJob Title: Industrial Mechanical Technician – Class A Department: Engineering Reports To: Maintenance Manager / Chief Engineer Location: Strike Force Staffing Employment Type: Full-Time or Part-Time Availability: Open Availability Required Number of Openings: Salary Range: Competitive Work Environment: Exposure to extreme temperatures (hot/cold); food handling environmentJob Summary:The Industrial Mechanical Technician is responsible for providing mechanical and electrical maintenance support at SFS client facilities. This role focuses on preventative maintenance, troubleshooting, equipment repair, and supporting system installations to ensure safe, reliable, and efficient plant operations. Technicians are assigned to client sites based on their weekly availability and may work across multiple facilities depending on operational needs. Key Responsibilities: • Diagnose and repair mechanical, electrical, pneumatic, and hydraulic issues on various types of production equipment., • Perform scheduled preventive maintenance and inspections on equipment to ensure reliable operation., • Use CMMS (Computerized Maintenance Management System) to manage work orders and maintenance logs., • Inspect, repair, and replace machine components such as bearings, filters, wiring, valves, switches, and gauges., • Interpret electrical/mechanical blueprints and schematics to troubleshoot systems., • Adjust and calibrate control instruments and functional components., • Start, test, and monitor machines to ensure proper performance after maintenance or repair., • Support production uptime by responding to emergency breakdowns and participating in on-call coverage., • Document maintenance activity and communicate effectively across shifts to ensure continuity., • Maintain a clean and safe workspace, complying with OSHA standards, GMP practices, and internal food safety protocols., • Contribute to the continuous improvement of maintenance systems and processes., • Follow all company safety rules, procedures, and PPE guidelines at all times.Qualifications & Skills:, • Associate degree in Mechanical Engineering or equivalent technical training (preferred but not required)., • Minimum 3 years of experience as an industrial maintenance technician in a manufacturing environment., • Strong mechanical and electrical troubleshooting skills up to 480V., • Ability to read and interpret mechanical and electrical schematics., • Familiarity with bakery or food processing equipment is a plus., • Proficient in Microsoft Word, Excel, and Outlook., • Strong verbal and written communication skills., • Willingness to work flexible hours and overtime as needed., • NY Boiler License is a plus, but not required.If you're a hands-on maintenance professional with a passion for keeping production running at peak performance, we want to hear from you. Join a team where your skills make a direct impact every day.

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job Description The role is responsible for providing applications sales support, working with our global sales team members and customers to determine the sensory technology, hardware, software reporting requirements, product sample testing, and inspection requirements for existing and potential new projects and applications. Responsibilities include lab work, field & virtual product demos, producing presentations and reports, inside sales support, and providing technical support for the sales and marketing team. Responsibilities also include developing and testing new technology solutions and processes that can improve product performance and marketplace positioning. This role will require the application of a wide range of basic academic knowledge, such as chemistry, knowledge of electro-mechanical systems, and statistics, as well as practical thinking and creativity. This position provides the opportunity to travel, and work with engineers on leading-edge products and will be a member of the Global Application Engineering organization. Knowledge, Skills, & Abilities: • >1 year’s experience with packaging testing solutions, would be a benefit, • >1 year’s experience with Pharmaceutical or Medical Device Applications, would be a benefit, • >3 years’ experience with Application Engineering, • Good writing skills, • High level of energy and readiness to travel, • Excellent Communication Skills and ability to present effectively to customers, • Detail-oriented, hands-on, and action-oriented, • Ability to assess next steps and see beyond immediate tasks at hand, • Able to travel 40%, strong customer focus, attention to detail, fast acting, and an excellent communicator Minimum Education Required: • BS from a program focused on engineering or sciences

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. The Senior Controls / Automation Engineer role requires an individual have a diverse engineering skill set with the ability to work independently to perform all aspects of process automation engineering and system integration, including initial concepts, specifications, design engineering, documentation, project implementation, testing, startup, and training of operating and maintenance personnel. You will be a key member of a diverse team of professionals developing solutions for our client's most complex automation challenges. Location: Regional Southern CT / Tarrytown area travel to sites You will: • Lead or work on a project team responsible for the design, configuration, and testing of continuous and batch control applications., • Understand the project scope and financials and exercise good time management skills to plan & coordinate the work as part of a project team by developing project schedules and budgets in collaboration with project leadership and identify change orders and justify changes to Project Management ensuring completion of all project deliverables to the satisfaction of the client., • Anticipate and provide solutions to project leadership and/or customer giving high priority to customer satisfaction offering strong technical expertise and advisement as part of the project team., • Adapt to a flexible work schedule & travel, if necessary, to participate in the design, development, and start-up of control systems at the client's facility., • Act as an automation Subject Matter Expert, • Be an ambassador that prioritizes the success of E Tech Group, our clients, and the Careers of our associates. You have: • Hands on experience executing automation projects for process plants, minimum of 3-5 years in industry, preferably in Life Sciences domain., • BS Engineering degree or equivalent educational background, • Detail oriented with strong technical aptitude and desire for learning new technologies, • Knowledge of industry and regulatory standards, design criteria and codes relevant to Instrumentation and Controls, • ISA S88 Batch standard, • ISA S95 Controls System Architecture standard, • GAMP 5 & cGMP, • 21 CFR Part 11, • Demonstrated ability to develop process control system applications, utilizing Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems, configuration of thin client server applications, design, developing & maintaining databases for data collection, configuring process historians and using reporting tools to present process data to operations & management, tuning control loops, providing control system startup services, troubleshooting existing control systems and providing control system qualifications., • Solid understanding of object-oriented software development & delivery methodologies, • Expertise with the design, implementation, maintenance and troubleshooting of virtual server-based control system architectures, and understanding of control system network topology, i.e. Ethernet, Ethernet/IP, ControlNet, DeviceNet, etc., • Knowledge of process instrumentation specification, installation & troubleshooting, and control panel design, check-out, commissioning & troubleshooting, • Hands-on experience rapidly troubleshooting and solving equipment & instrument-related issues during start-up and commissioning and perform complex system testing, • Experience working at customer sites supporting the installation & commissioning of equipment and systems., • A DNA comprised of collaboration and teamwork. We are seeking Application Knowledge in: • PLC Programming with Rockwell Studio5000, RSLogix5000, • Ability to program in RLL, SFC and ST, • Plant Pax module definition is required, • HMI Programming using one or more of Rockwell FTView ME and SE, Wonderware System Platform, Inductive Automation Ignition You may have: • MQTT, understanding of server architecture Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off., • Learning and growth are key parts of the E Tech culture. We provide you with training and continuing education from day one, so you can advance your career. As an E Tech associate, you can unlock your greatest potential through challenges and opportunities. E Tech Group is an Equal Opportunity / Affirmative Action Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs.

Job Description Fire Protection and Plumbing Engineer - White Plains, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP Critical Facilities Design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Candidate will work with customers to gather design requirements for plumbing and fire protection design projects supporting various mission critical / data center centric projects. Will translate requirements to internal design team, while providing updates to customer. Responsibilities: • Design Plumbing and Fire protection systems in mission critical facilities - trade floors, labs, control rooms, data centers, etc., • Fire and plumbing engineering and design of systems cold and hot water systems, non-potable water systems, water treatment, sanitary drainage and vent systems, storm drainage systems, all types of pumping systems, natural gas distribution systems, special plumbing systems; fire suppression systems; sprinkler piping design, including hydraulic calculations; Incipient fire detection systems, • Work on multiple projects simultaneously, • Coordinate with other internal engineering disciplines to achieve successful, functional and innovative designs for our clients, • Interact with other building disciplines (architectural, structural, electrical, mechanical, civil, controls, etc.) to ensure compatibility with the design intent, • Select equipment for use in building systems and write reports, • Provide specifications for all fire protection and plumbing materials and equipment, • Go to client site as needed for project meetings/site observations, • Perform field surveys at customer sites to document existing conditions and/or observation of construction activities, • Participate in client project requirement meetings and value analysis and basic cost estimating, • Conduct QA /QC / quality assurance and quality control on project, • Perform and oversee the performance of load calculations and system design using company standard software, and proprietary manufacturer software, • Develop Plumbing and Fire Protection Drawings, • Design and document Plumbing and Fire Protection systems, • Assist in the continued development and updating of standards and specifications for the plumbing and fire protection, • Familiarity with renovation and new work projects; appropriate codes, standards and industry best practices, • Prepare Contract Documents using Revit and AutoCAD, • Engage in the development of a design through sketches, electronic models, diagrams, and other visual formats Qualifications: • Bachelor's degree in Mechanical / Fire Protection / Plumbing engineering degree required, • Previous experience at an engineering consulting MEP firm a big plus, • PE; Professional Engineer a big plus, • Mission Critical Facilities Experience a huge plus!, • 5+ years' experience or more of plumbing design and fire protection systems, • Strong technical knowledge in fire protection and plumbing, • Excellent organization and planning skills, • A sound knowledge of engineering fundamentals, • Highly motivated, proactive and willing to take on new challenges, • Strong computer skills and skilled in software typically used in plumbing / fire protection design (i.e. hydraulic calculations, etc.), • Strong working knowledge of building, plumbing and fire codes, • Strong communication skills! Excellent written and verbal!, • Revit Experience is a must, • Ability to interface with clients, • International Codes and NFPA Requirements Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: 961q89cd1468s7rbapxg96zyae@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionDescription: Job Title: Quality Control Engineer / Quality Specialist Location: Spartanburg, SC or Mount Vernon, NY Company: ICE AIR, LLC and Affiliates (“Ice Air”, the “Company”, “We”) About Us: Ice Air is a manufacturer of innovative HVAC solutions serving the North America market. We are dedicated to providing reliable, quality, energy-efficient equipment for all new construction, replacement and retrofit projects. Position Overview: We are seeking a motivated Quality Control Engineer / Specialist to support the reliability, performance, and continuous improvement of our HVAC products and manufacturing processes. This role will focus on identifying quality issues, performing structured root cause analysis, improving internal processes, and strengthening feedback loops between manufacturing, engineering, service, and customers. The ideal candidate will have experience working in a manufacturing or service-oriented environment and will be comfortable analyzing technical problems, communicating with cross-functional teams, and driving corrective actions that prevent recurring issues. This individual will play an important role in helping build more robust systems and improving the overall customer experience. Key Responsibilities: • Lead Root Cause Corrective Action (RCCA) investigations into internal quality issues, field failures, and customer complaints., • Utilize structured problem-solving tools such as 8D, 5-Why analysis, Fishbone diagrams, Pareto analysis, and FMEA to identify root causes and implement corrective actions., • Analyze service trends, warranty data, and field performance information to identify recurring issues and improvement opportunities., • Work closely with engineering, manufacturing, and service teams to strengthen system reliability and help “bullet-proof” HVAC equipment performance in the field., • Develop and maintain quality control processes, inspection standards, and documentation to ensure consistent production quality., • Partner with manufacturing teams to identify process weaknesses and implement improvements that reduce defects and variability., • Monitor quality performance indicators including defect rates, warranty trends, service call data, and customer feedback., • Support containment activities and corrective action implementation when quality issues arise., • Communicate clearly with both technical teams and leadership, ensuring issues and solutions are understood across the organization., • Assist with customer communication when necessary to explain findings, corrective actions, and improvement plans., • Support new product introductions by validating quality processes and production readiness., • Help drive a culture focused on continuous improvement, accountability, and proactive quality management. What We Offer: • Competitive salary, bonus, and benefits package., • Significant long-term growth opportunity., • Collaborative and supportive work environment.Requirements: Required Qualifications • Bachelor’s degree in engineering, Industrial Engineering, Mechanical Engineering, Quality Engineering, or related technical field preferred., • 2–4 years of experience in quality engineering, manufacturing, service engineering, or related technical roles., • Hands-on experience performing root cause analysis and implementing corrective actions., • Strong analytical and data interpretation skills with the ability to identify trends and improvement opportunities., • Ability to work effectively across multiple departments including operations, engineering, service, and leadership teams., • Strong written and verbal communication skills., • Proficiency with standard business tools including Excel, Word, and PowerPoint. Preferred Qualifications • Experience with HVAC systems, refrigeration systems, or electro-mechanical assemblies strongly preferred., • Experience working with service teams or customer feedback loops is a plus., • Experience with HVAC equipment such as PTAC units, packaged systems, or commercial HVAC products., • Familiarity with manufacturing quality systems, continuous improvement methodologies, or Lean/Six Sigma environments., • Experience performing failure analysis or reliability investigations., • Ability to help build structured processes that prevent issues rather than simply reacting to them. Personal Attributes • Strong problem-solver with a curiosity for understanding technical failures., • Comfortable working in a fast-paced manufacturing environment., • Ability to communicate effectively across all levels of the organization., • Collaborative mindset with the ability to influence teams and drive improvements., • Focused on building durable systems, strong processes, and long-term quality improvements.

Job Description Power Studies Engineer - Critical Facilities - White Plains, NY / Remote Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will have the opportunity to partner with all levels of engineering and design staff to develop power studies for projects once design has been completed. Design projects are primarily focused around critical power systems for new data centers and expansions to existing data centers in the hyperscale / colocation markets. They will have experience and in-depth knowledge of Electrical Power Distribution System design and installation. This person will work as part of the Engineering Team and interact closely with organizational leadership to complete Power Systems Studies. Working and communicating with internal team and clients effectively while following company's guidelines with company's goals, objectives and values in mind. Responsibilities: • Autonomous in day-to-day work with being given high level instruction on projects or assignments, • Execute and lead design teams and designs of complex scope, and coordinate activities of other personnel as needed, • Mentor engineers and assist with training and development to create a learning and growing environment, • Lead Power Systems Studies focused in the mission critical data center industry, • Independently perform Power System Studies for mission critical data center projects, • Evaluate Equipment: Assess equipment capabilities, ratings, and conditions (transformers, circuit breakers, capacitors, etc.); Determine if Equipment meets system requirements, • Lead efforts: proposal development, training / mentoring, and development of standards / automations to improve deliverables, • Conduct Power Systems Studies and produce reports along with final deliverables including breaker settings tables, TCC's, and arc flash labels, • Load Flow Studies: Analyze current and future system load to ensure power delivery without overloading components, • Short Circuit Analysis: Evaluate potential fault conditions to determine the system's response and ensure that equipment ratings are not exceeded, • Protection Coordination: Study the settings of protective devices such as relays, circuit breakers, and fuses to ensure they coordinate correctly and provide optimal protection, • Arc Flash Analysis: Conduct studies to determine potential arc flash hazards, calculate incident energy, and recommend safety practices and protective equipment, • Transient Stability Analysis: Evaluate the power system's ability to maintain synchronism after large disturbances, such as faults or sudden changes in load, motor starting, etc., • Develop proposals including project scope, schedule and budget, • Effective time management of project design team including forecasting resources and resource coordination, • Identify potential project scope changes; aid in development of strategies to minimize impact and changes from estimated costs and project deadlines, • QA/QC peer reviews for projects which candidate is not the engineer, • Optimize workflow and deliverables by developing templates, standards, automations, etc. Requirements: • 5-10+ year's Electrical Engineering experience, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Possess advanced knowledge of electrical topologies associated with mission critical facilities, • Experience designing electrical power systems for complex data center/mission critical facilities, • Experience with Protective Devices: relays, circuit breakers, and fuses with knowledge of how they function, what versions and device settings, • Understand ratings, capabilities, and conditions of various power system equipment, • SME of industry and safety standards related to power systems, with emphasis related to arc flash hazards and other safety-related matters, • Understand effects and requirements of connecting new generation or loads to existing systems, • Power system simulation software with one of the following: ETAP, PSS/E, SKM, Easy Power, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Skilled at reviewing design drawings and equipment submittals, • Perform code analysis including selection of equipment, wiring, etc. to meet code requirements, • Conduct code analysis and possess advanced knowledge of electrical codes, • Analyze and prepare documents, reports and correspondence, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • Previous experience in the Military / Military Veterans a huge plus!, • Minimal Travel: 10-20% Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: p77t1xk1qim8usuxfxiqiq7t9a@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description JOB TITLE: Senior Electrical Engineer LOCATION: Hawthorne, NY (on-site) TYPE: Full time, regular COMPENSATION: $130,000 - $175,000/yr Clarapath is a medical robotics company based in Westchester County, NY, dedicated to transforming and modernizing laboratory workflows. Our mission is to improve patient care by increasing efficiency, reducing costs, and enhancing the quality and consistency of laboratory processes. Our portfolio includes SectionStar™ and TrimStar Pro™, innovative electro-mechanical systems designed to automate and elevate critical steps in the histology workflow. SectionStar™ delivers high-quality, consistent tissue sections, while TrimStar Pro™ streamlines and standardizes the trimming process - together enabling laboratories to operate with greater precision, throughput, and reliability. At Clarapath, we bring together experts across engineering, data science, robotics, healthcare innovation, and laboratory operations. Our R&D team drives innovation, product enhancements, and a strong pipeline of new solutions, while our manufacturing team oversees production and quality control at our ISO-certified facility. Also based in our New York headquarters are our sales, marketing, administrative, and service teams, who work closely together to ensure every customer receives a seamless, personalized experience at every touchpoint. Role Summary: The Senior Electrical Engineer will play a critical role in the architecture, design, development, and integration of electrical systems for Clarapath’s advanced electro-mechanical medical devices, SectionStar™ and TrimStar Pro™. This role is responsible for leading PCB design and review, developing wiring and harness schematics, designing robust power and control systems, and supporting embedded hardware components while ensuring seamless integration across mechanical and software subsystems. The ideal candidate brings deep expertise in hardware electrical design, a strong understanding of embedded systems, and the ability to drive technical decisions from concept through production. We’re looking for a hands-on, detail-oriented engineer who thrives in a fast-paced environment, mentors junior engineers, and views electrical engineering as a core driver of innovation, reliability, and scalability in medical device development. Responsibilities: • Lead the design, development, and validation of electrical systems for complex electro-mechanical medical devices, • Own PCB design and review, including schematic capture, component selection, layout oversight, and design for manufacturability (DFM), • Design and document wiring diagrams, cable assemblies, and electrical harnesses, • Develop and support power distribution, control systems, and signal integrity solutions, • Collaborate closely with mechanical, software, firmware, manufacturing, and quality teams to ensure seamless system integration, • Support embedded hardware development and interface with firmware/software teams on requirements and debugging, • Drive electrical design through prototyping, testing, verification, and production release, • Troubleshoot and resolve electrical issues at the system, board, and component levels, • Author and maintain technical documentation, including schematics, test plans, reports, and design history file (DHF) artifacts, • Ensure designs comply with applicable safety, EMC, and regulatory standards for medical devices, • Mentor and provide technical guidance to junior electrical engineers, • Support supplier selection, vendor communication, and design reviews with external partners Qualifications: • Bachelor’s degree in Electrical Engineering or a related field (Master’s preferred), • 7+ years of professional experience in electrical engineering, preferably within medical devices, robotics, or complex electromechanical systems, • Strong expertise in analog and digital circuit design, • Proven experience with PCB design tools and electrical CAD software, • Solid understanding of embedded hardware systems and interfaces (MCUs, sensors, motors, power electronics), • Experience designing power systems, motor controls, and low-noise signal paths, • Ability to read, create, and review schematics, wiring diagrams, and technical drawings, • Hands-on experience with lab equipment and electrical debugging, • Familiarity with design controls and regulated product development environments, • Excellent communication skills and ability to collaborate across disciplines, • Experience in FDA-regulated medical device development, a plus, • Knowledge of IEC/UL safety standards and EMC compliance testing, a plus, • Experience supporting products from early R&D through manufacturing scale-up, a plus, • Exposure to firmware development or scripting for hardware testing, a plus Company Offers: • Competitive salary will be commensurate with experience and education, • Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays)., • A collaborative and diverse work environment where our teams thrive on solving complex challenges, • Ability to file IP with the company, • Connections with world class researchers and their laboratories, • Collaboration with strategic leaders in healthcare and pharmaceutical world, • A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description SUMMARY The Boiler Sales and Application Engineer delivers customer-facing sales and technical support within the assigned sales territory, focusing on achieving sales targets and delivering exceptional customer service. The role combines boiler plant technical expertise with advanced sales skills to provide clients with solutions for boiler applications, manage major project interactions, and work with the service and project management team to ensure successful conclusion of the sale. This role requires a fundamental understanding of boiler (ideally Cleaver-Brooks) products and a capacity for guiding engineering design with contractors and engineering teams. KEY RESPONSIBILITIES Sales and Customer Relationship Management • Conduct on-site visits within the service area to meet sales objectives and enhance client relationships., • Prepare and present price quotations and bids, ensuring alignment with material, labor, and manufacturing schedules., • Enter customer and sales data into CRM (HubSpot), and maintain detailed, up-to-date records., • Build and sustain robust relationships with key purchasing contacts, including contractors, engineers, and owners., • Monitor market trends, competitor activity, and sales indicators to inform sales strategies. Technical Sales and Engineering Support • Provide installation advice, turnkey solutions, and system design feedback to contractors and building owners, serving as the company’s technical liaison., • Lead project execution from initial design and project management stages, ensuring smooth handoff to the service and project management team., • Conduct equipment demonstrations and “Lunch and Learn” sessions for contractors, engineers, and clients., • Act as a critical technical resource for the client, offering expertise and advice with the goal of influencing the specification to include products within our distribution portfolio., • Participate in ASHRAE and similar industry events for professional development and networking. Regulatory and Product Knowledge • Maintain up-to-date knowledge of Cleaver-Brooks boiler applications and relevant industry standards, providing expertise to clients., • Coordinate factory visits for clients and engineers to enhance product understanding and customer engagement. Cross-Functional Collaboration • Work closely with project managers, inside sales engineers, and the service department to deliver cohesive, well-supported solutions to clients., • Participate in strategic initiatives to refine sales processes, improve team performance, and drive revenue growth. COMPENSATION • As this is a sales role, the compensation has a base pay and an unlimited commission potential., • The base pay is $80,000 per year., • The Commission is 10% of profit for sales up to a target, 12% of profit up to the next target, and 15% of profit up to an unlimited level., • It is not uncommon for this role to earn a total compensation of $130,000 to $160,000; and on larger project years exceed $200,000., • ESOP Benefits are also in the range of 15% to 30% of base salary. QUALIFICATIONS • Education: Bachelor’s degree in engineering, marine engineering or a related field., • Experience: Minimum 5 years in sales with a focus on boiler or heavy industrial applications., • Skills: Strong communication, customer service, and negotiation abilities; proficiency in equipment and software applications relevant to the role.Company DescriptionMiller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.

Job Description Position Overview: The Hudson Clean Heat Applications Engineer will be responsible for the design, coordination, and implementation of mechanical, electrical, and plumbing systems for commercial, industrial, and institutional projects utilizing the latest in water source heat pump technology and any other non-carbon based heating and cooling technology. This role requires applied engineering experience in MEP disciplines and collaboration with multidisciplinary teams to ensure effective project delivery. The engineer will support the Sales Team in design development, construction documentation, and the Project Management team in the project execution, ensuring compliance with applicable codes, standards, and project specifications while meeting the project timelines and cost targets. Key Responsibilities: • Design & Engineering Development, • Prepare detailed design layouts, calculations, and specifications for heat pump, electrical, and plumbing systems., • Perform equipment selection and sizing, load calculations, and energy analysis., • Review and apply relevant building codes, standards (ASHRAE, NFPA, NEC, IPC), and regulatory requirements., • Develop schematic designs and support design development and construction documents., • Project Coordination, • Collaborate with the Sales Team on the pre-sale engineering characteristics of projects., • Collaborate with architects, structural engineers, contractors, and other disciplines to ensure integrated design solutions., • Coordinate MEP systems across project teams to resolve conflicts and design issues., • Support the project manager in preparing design packages for client review and approval., • Participate in project meetings and communicate engineering concepts to both technical and non-technical stakeholders., • Construction & Implementation Support, • Review submittals, shop drawings, and Requests for Information (RFIs) during the construction phase., • Together with the Project Manager, conduct site visits and inspections to monitor compliance with design intent and installation quality., • Assist in commissioning support and functional performance testing of MEP systems., • Technical Documentation & Reporting, • Prepare engineering reports, technical specifications, basis of design documents, and other project deliverables., • Maintain accurate documentation throughout the project lifecycle, including design revisions and field observations., • Participate in value engineering exercises and support lifecycle cost analysis., • Compliance & Safety, • Ensure that all designs comply with environmental, health, and safety regulations., • Incorporate sustainable design principles and energy efficiency best practices where applicable., • Continuous Improvement & Professional Development, • Stay current with technological advancements, industry best practices, and code changes in MEP disciplines., • Pursue professional development opportunities, including licensure (e.g., PE, LEED AP). Qualifications: • Bachelor’s degree in mechanical, Electrical, or Architectural Engineering, or related field., • Approximately 3-5 years of experience in MEP design and engineering., • Proficiency in design software (AutoCAD MEP, Revit, and/or similar BIM tools)., • Familiarity with energy modeling software and calculation tools is preferred., • Strong understanding of construction processes and building systems integration., • Effective communication and coordination skills., • EIT certification preferred; PE license is advantageous but not mandatory at this level. All candidates must be legally permitted to work in the United States of America, pass a background check, a drug screening and reliably commute to both the Sleepy Hollow, NY office and on occasion to a job site. The Candidate must have their own auto insurance in their own name and meet corporate minimums for coverage. Company DescriptionMiller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.

Job Description HVAC Controls Engineer - White Plains, NY Our client is a Leading Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have previous experience with the design, construction, integration, and commissioning of Controls and Building Automation Systems (BAS systems) as it pertains to Mechanical / HVAC equipment design in a data center environment. The candidate shall have the expertise to lead the design of new systems and make upgrades to existing automation systems for HVAC and critical cooling systems in the mission-critical environment. The candidate may need to assist in complete startup, commissioning, and validation procedures of these systems. The candidate will need to collaborate with the Electrical and Mechanical Engineering teams, for design sequences, powering of equipment, etc. Responsibilities: • Execute and lead automation design teams of complex scope, and coordinate activities with other disciplines as needed, • Mentor mechanical engineers and assist with training on controls design and development., • Design and implement front end platforms for HVAC controls., • Develop and improve configuration, programming, networking, and diagnostic standards, • Engineer and Implement programming, • Lead creation of modification of programming logic to meet sequence of operations / SOO / Methods of Procedures / MOPs, • Design control, monitoring and systems integration of HVAC / mechanical equipment / systems, • Maintain and deploy updated versions of applications for existing control systems with minimal supervision, autonomous in day-to-day work with being given high level instruction on projects or assignments, • Work with leading edge automation systems from large scale controls vendors;, • Lead development design and continuous improvement of configuration, programming, networking, and diagnostic standards;, • Lead design of controls for centralized chilled water plans condenser water plants, etc., • Review engineered shop drawings and submittals - sequence of operations, installation drawings and point lists, • Participate in building automation focused design reviews, • Assist in the design, configuration, programming, and diagnostics / troubleshooting of BAS networks, • Understand IT / OT interface requirements including routers, switches and network addressing, • Assess, recommend, and implement industry best practices into new and existing Critical Environment Programs, • Develop process documentation and training materials, • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs, Controls vendors, GC's and commissioning agents on project progress, • Assist / Develop all project communication and reporting, weekly progress reports, etc. Qualifications: • BA / BS in Engineering or relevant degree a Huge Plus, • Licensed PE / EIT / Certifications a Plus, • Data Center Engineering experience with Automation and Controls Experience, • Experience integrating PLC / ALC with complex data center / mission critical facilities, • 5-10 + years with BMS / BCM / BAS Systems (Building monitoring systems / building control systems / Building Automation Systems, • Previous experience working on Controls Products from companies such as: Johnson Controls / JCI; Siemens; Automated Logic; Honeywell; GE Control Systems; Schneider Electric, • Ability to read and audit one-lines / blueprints / CAD drawings and controls diagrams, • PLC / ALC Programming Experience, • Experience with Controls systems design as it relates to: Critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Experience working with common BAS protocols BACnet IP, BACnet MSTP, Modbus RTU, Modbus TCP, etc., • Skilled at reviewing design drawings and equipment submittals, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, delegator and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Superior analytical, planning and problem resolution skills, • Must be able to provide necessary pro-active recommendations to clients, • Knowledge of general computer hardware & software applications, • Travel: 5% / Minimal travel if located near NYC or LA Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: kssd3jzhg8fmr3753eaa1ebw9o@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionSenior Electrical Engineer - Critical Facilities - White Plains, NY (hybrid /remote) Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will involve acting as a senior electrical engineer, designing critical power systems for new data centers and expansions to existing data centers. The ideal candidate will have past experience designing electrical systems specifically for large data centers. They will have experience and in-depth knowledge of Electrical Power Systems / Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems, PDUs and electrical switchgear is a must. They will be proficient using AutoCAD MEP and Revit MEP to develop electrical construction models and documents. You will help lead the design and effectively work with / communicate with all the trades and stakeholders involved in the project. Responsibilities: • Manage projects, create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical engineering design role for all sizes of data center facility design projects- enterprise data centers, Colocation Providers and for Hyperscale Companies., • Create Conceptual Designs gathered from meetings with the client for Field Engineer focus, • Work with Management to respond to RFPs; Review shop drawings and submittals; Review and respond to RFIs, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies Put these in clear concise work statement for the field, • Represent the company in project meetings as needed, • Collaborate with all design staff and oversee full cycle electrical design activities, • Interact closely with the Project Management Team to produce construction documents, develop and edit project specifications and lead the construction administration process, • Execute and lead design teams and design projects of complex scope, • Perform intermediate to advanced electrical design tasks including development of electrical distribution systems and topologies, infrastructure and equipment layouts and selection / sizing of equipment, • Utilize AutoCAD and Revit software to prepare drawings, • Review and / or prepare book or sheet specifications for electrical systems, • Develop and / or review sequences of operations, • Assist in proposal development including project scope, schedule and budget, • Effective management of project design team including resource forecasting and coordination, • Identify potential project scope changes and aid in development of strategies to minimize impact and control deviations from estimated costs and project deadlines, • Support contact for design clients and builds effective, long-term client relationships, • May direct / coordinate interns / other engineering and technical staff, • Survey existing building conditions / Conduct Field Observations and prepares technical reports of findings and commissioning support, • Collect data and other information for construction documents, • Prepare project design and construction documents, • Review and complete punch lists and project closeout documents, • Prepare project progress reports for internal and external stakeholders, • Update and maintain shop drawing and RFI log Qualifications: • 8-15 years experience, • Experience working for MEP firms, an A/E firm, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Experience with the design process of building systems for data center and mission critical projects, • Knowledge of electrical systems found in buildings including single/three phase power distribution, lighting and lighting controls, grounding and life safety systems, • Knowledge of codes and specifications for the design of electrical systems including National Electric Code, Life Safety and Energy Conservation Codes, • Technical / design software including short circuit coordination and arc flash studies, equipment sizing, underground feeder calculations and lighting calculations, • Previous experience using: Revit MEP projects, AutoCAD MEP, BIM a plus, • Experience working on data center /data center / mission critical projects, • Extensive Experience with Electrical Power Systems and Equipment - UPS / Uninterruptible Power Supply, Generators, Batteries, switchgear , Power Distribution Units, Backup Power , Electrical Power, Power Systems , Medium Voltage , High Voltage , etc., • Experience working on complex data center/mission critical facilities design projects a must, • Proficient in design and calculation software MS Office: Excel, Word, Project, PowerPoint, Teams SKM Powertools, EDSA or ETAP experience is desirable • Exceptional organizational skills for file management, • Skilled with various electrical topologies and distribution systems, • Skilled in performing code analysis including selection of equipment, wiring, etc. to meet code requirements, • Ability to successfully work independently, • Self Starter, self motivated, and should prioritize well, • Effective Communicator – emails, phone and face to face, • Complete assignments accurately and with attention to detail, • Analyze and prepare documents, reports and correspondence, • Communicate effectively directly with clients and at times serve as primary point of client contact, • Ability to work under pressure and meet close deadlines, • Ability to effectively plan and delegate the work of others, • Organizational skills, with the ability to manage multiple tasks simultaneously, • Previous Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, Army National Guard, etc.)Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: xecygz66zc6wx6iraifwhhi5ha@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Mechanical Engineer - White Plains, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have past experience designing commercial HVAC mechanical systems specifically for cooling mission critical data center computer rooms. They will have experience with heating and cooling load calculations, ductwork and piping sizing, selecting HVAC equipment, energy modeling and other engineering calculations. Responsibilities: • Create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary mechanical engineering design role for complex facility design projects, • Create Conceptual Designs gathered from meeting with the client, • Oversee Commissioning Process as needed, • Work with Business Development Team to respond to RFPs as needed, • Represent the company in project meetings Qualifications: • 5-10 years experience designing data center cooling systems, • PE or EIT a plus, • LEED a plus, • Bachelor's Degree in Mechanical Engineering or Equivalent, • Experience with Mechanical Systems ( HVAC , CFD ( Fluid Dynamics ), Boilers , Chillers , Pumps , CRAC / CRAH Units , Air Handling Units , etc. ), • Equipment sizing and calculations, • Experience reviewing work in REVIT; Trane Trace or IES VE Energy Modeling software a plus, • Familiar with the design process of building systems for mission critical projects or healthcare / hospital required, • Effective Communicator – emails, phone and face to face., • Ability to work independently, • Proficiency in MS Office products, including Word, Excel, Outlook and MS ProjectSubmittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: 65xah9kqjg11fz6h3kx66yewhc@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description The Role: Controls Engineer Description: Are you a dynamic thinker? Do you gravitate towards sensory technologies and their application? Do you have a strong understanding of both electro-mechanical engineering and software? Do you like interaction design? If you answered the above questions affirmatively you may be a fit for this position. We are seeking someone deeply interested in control systems engineering ranging from basic pneumatic and sensory measurement to complex automation projects. The role is in constant collaboration within the controls team as well as between software and mechanical engineering. My client is an equipment manufacturer that engages in both bench-top inspection solutions as well as large-scale automated systems. The primary focus of the position is to ensure the measurement accuracy of the system, reliable operation through control systems design, and development of efficient user interactions with the equipment through HMIs and other graphical means. A secondary focus is on the development of sensory technologies and how they apply to package inspection. The role is positioned on our R&D team, focused on the development of new applications and custom engineering to help support the food, medical device, and pharmaceutical industries with leading-edge engineering and a focus on critical packaging applications. The employee will be responsible for designing, selecting, and implementing components and developing the logic for proprietary technologies. The position will be responsible for programming, documenting, training, and release testing of finalized technologies for the various industries we support. Some travel, both domestic and international, is expected. Keywords: PLC/HMI Programming (Beckhoff, SAIA, Allen-Bradley) (structured text, instruction list, ladder logic and function block) Automation Robotic Controls and Theory (Staubli, Yaskawa) Sensor integration (pneumatic, electrical, vision, etc) Wiring Design (AC and DC circuits) Quality GMP/GDP Teamwork Critical Thinking & Effective decision making Requirements: • 3+ years of job experience, • Bachelor’s degree or higher in a relevant field, • Must have legal permission to work in the U.S. and have a valid passport.

About This Position: We are seeking Junior Engineers (0-2 years of experience) to complement existing engineering staff in our Highway group. Responsibilities may include: field work, traffic engineering and analysis of roadways, design and layout of project components in 2d and 3d, preparing construction drawings and documents, field observation for adherence to construction plans and specifications, report writing and cost estimating. Proficiency with either AutoCAD or Microstation, Inroads, AutoTurn, Synchro, Vissim and GIS software a plus, but not required. Engineers I/II evaluate, select, and apply standard techniques, procedures and criteria to perform a task or sequence of tasks for conventional types of plans, investigations, or surveys with relatively few complex features under the general guidance of a Project Engineer or Project Manager. Work on small projects or portions of larger projects. Typical projects include highway design, long range transportation planning, and traffic impact studies. Other Possible Essential Job Functions: • Primary data collector in the field., • Perform specific portions of a broader assignment of an experienced engineer., • Perform standard computations or basic engineering analysis., • Maintain equipment inventory., • Attend project meetings with senior staff., • Responsible for basic QA/QC tasks; review of own work, as well as reviewing the work of Junior Engineers and Technicians., • Provide limited supervision to technicians., • Coordination with municipalities/agencies regarding background volumes, accident data, signal timings, etc., • Develop and analyze trip generation and volume. Job Requirements: Bachelor's degree in engineering from an ABET/EAC accredited program or an approved equivalent. Hourly Pay Range: Albany, NY and Syracuse, NY: $31.50/hour - $39/hour Poughkeepsie, NY: $32/hour - $41/hour Westchester - White Plains, NY: $32.50/hour - $45/hour Pay is based on applicant's ability/experience and will be rated accordingly. EXTRAs At Creighton Manning, continuous learning and mentoring are part of our DNA. There are opportunities to advance your career, either on the technical track towards Project Manager or into various corporate leadership positions. Team members get 360 reviews with input from peers and managers, to get a broad picture of their contributions. EducationBachelors of Engineering (required) Experience0 - 1 years: Related Experience (required) Licenses & CertificationsDriver's License (required) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Creighton Manning Engineering and Surveying, a GAI Company is seeking a Project Manager with 10+ years of experience in water/wastewater engineering to join our talented and energetic team in Upstate New York with the flexibility to work out of our Albany, Poughkeepsie, Syracuse or White Plains offices. This is an opportunity to build the water/wastewater business in New York working with our existing clients with the support of GAI's water/wastewater team. An ideal candidate has planning, design, permitting, and construction experience as well as client relationships in the New York municipal water/ wastewater market. We are looking for a motivated person to join our team to build our business with technical, project management, and business development abilities. This position is an excellent opportunity to grow into a leadership position as the New York Water Division expands its portfolio and range of services. The successful candidate will be eligible for a sign-on bonus. Job Duties: • Independently perform and guide multi-discipline teams on the completion of water and wastewater planning, evaluation, design, and construction projects related to collection, conveyance, and distribution systems, pump stations, storage and treatment facilities, and asset upgrade/rehabilitation., • Plan and manage projects from inception through construction and start-up, including client coordination, team chartering, scope, schedule and budget development and management, safety, quality assurance/quality control, project profitability, and staff workload coordination., • Provide technical execution and oversight of design projects including schematic/preliminary design, design development, final design, specifications, permitting, construction contract document production, bid-phase services, and construction-phase services., • Lead water/ wastewater consulting tasks, including flow projections, hydraulic modeling, master planning, detailed design calculations, alternative analysis and selection, cost estimating, equipment selection, and project prioritization., • Hire, mentor and develop junior staff for both technical and project management knowledge, skills, and abilities., • Contribute to business development activities, including opportunity identification, proposal development, interviews/presentations, and client relationship cultivation., • Serve as a primary doer/seller for the New York Water Division, growing into a "go-to" Creighton Manning representative to clients, key contractors and design partners, professional organizations, and in the communities we serve. Minimum Qualifications: Required: • Minimum 10 years of experience in the municipal water/ wastewater market involving master planning, hydraulic modeling, technical reports, design of distribution and conveyance systems (including pipelines in public rights-of-way), treatment process/facility design, regulatory permitting, services during construction, and/or other technical services., • Minimum 2 years of experience serving as a Project Manager leading and directing multi-discipline project teams, both internally and externally, with a track record of delivering on time and on budget while meeting or exceeding client expectations., • Excellent technical writing, verbal communication, and leadership skills working in a dynamic team environment., • Sense of urgency and self-initiative to meet deadlines and develop new business opportunities., • Experience in Microsoft Office, Microsoft Project, AutoCAD/ Civil 3D, ArcGIS, and industry hydraulic and design modeling software., • Integrates solutions to complex problems across specialty areas., • Demonstrates leadership Preferred: • 10+ years of engineering experience, with at least 3 of those years serving in an engineer-of-record capacity for water and/or wastewater projects., • Experience with the delivery of cross-market projects., • Trenchless pipeline design, permitting, and construction experience., • Facility and pipeline condition assessment field and data management experience., • Successful client management/ business development experience in Upstate New York. Pay Range Albany/Syracuse - $55/hour - $68/hour Poughkeepsie - $59/hour - $73/hour Westchester- White Plains - $63/hour - $78/hour Why Creighton Manning: At Creighton Manning, exceptional people have an exceptional place to work, grow, lead, and achieve. Explore an array of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy comprehensive benefits and feel good about being part of a collaborative team that's committed to supporting the communities we serve. Join Creighton Manning and distinguish yourself in a company poised for unlimited growth. Creighton Manning is committed to diversity, equity, and inclusion by fostering a workforce that represents different communities, cultures, and viewpoints. We will continue to build mutual trust and respect where employees are empowered to share their diverse perspectives, experiences, and ideas. Benefits To Working at Creighton Manning Include: • Competitive salary -Creighton Manning is committed to paying market-based salaries, • Comprehensive benefits package including medical, vision, dental, company paid Long Term Disability and Short-Term Disability (benefits start within 30 days of hire), • New paid Maternity/Paternity/Adoption program, • Generous Paid Time Off and 7 paid holidays, • 401k company match, • Tuition Reimbursement #LI-VL1 EducationBachelors of Engineering (required) Experience2 years: Project Manager leading and directing multi-discipline project teams, both internally and externally, with a track record of delivering on time and on budget while meeting or exceeding client expectations. (required) 10 years: Municipal water/ wastewater market involving master planning, hydraulic modeling, technical reports, design of distribution and conveyance systems (including pipelines in public rights-of-way), treatment process/facility design, regulatory permitting, services during construction, and/or other technical services. (required) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

The Operating Engineer/Journeyman is responsible for managing the installation of upgrades for commercial landscape maintenance accounts.Use hand and/or power tools or equipment to perform a wide range of landscape and irrigation duties.Build irrigation components such as Remote-Control Valve assemb

Field Service Tech Blow Mold Machines - Greenburgh, NY Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain Extrusion Blow Molding Injection Blow Molding or Injection Stretch Blow Molding Equipment Extruders Injection Molder Blow Molders Screw Plasticizers Sc

Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more. Generate, review, and refine questions and solutions based on real-world mechanical engineering scenarios. Apply advanced subject matter knowledge to evaluate and

Contract position with a client located in.Rate Range: $75-$80/hr on W2 without benefits, The rate may be negotiable based on experience, education, geographic location, and other factors.Title: Technical Project Manager.Location: Tarrytown, NY (HYBRID).Enterprise Cyber Resilience Program.Active Dir

Seeking a highly skilled and experienced, Senior IT Project Manager that can lead Master Data Management (MDM) project requirements and assist with solution design for this opportunity.This individual must have strong leadership and collaboration skills, create and track integrated project plan acti

Lee's Marketplace is seeking a detailed Project Manager to ensure on‑budget and on‑schedule project delivery while leading cross‑functional teams.In this full-time role, you will manage day-to-day project schedules, financials, and the engagement of client requirements.The ideal candidate poss

Benefits: 401(k) matching Competitive salary Dental insurance Health insurance Opportunity for advancement Paid time off Training & development Vision insurance A Data Management Manager is responsible for leading enterprise data strategy, governance, and transformation initiatives in a fas

A leading cybersecurity firm is seeking a Cyber Tools Engineer to enhance client cybersecurity initiatives.

Divelement is now Winmill! JOB SUMMARY We are looking for a marketing Software Project Manager with hands‑on experience in software development , web technologies , and website migration projects.You’ll be leading the planning, coordination, and execution of a high‑impact projects, working al

GCS Recruitment is seeking a Technical Project Manager in the United States to lead the end-to-end delivery of technical releases.The successful candidate will coordinate cross-functional teams, ensuring outcomes are secure, resilient, and achieved on schedule, within budget.Candidates must have pro

LE04 Public Consulting Group LLC in the United States seeks an experienced professional to lead project teams in delivering public sector solutions.The ideal candidate will have at least 10 years of technology experience and strong project management skills, particularly in cloud-based ERP systems l

A leading engineering firm in the United States is seeking a Project Manager with data center project experience. This role involves managing design engineering projects and requires approximately 25% travel to project sites. The ideal candidate will have over 5 years of project management and desig

A global leader in service management is seeking a Technical Project Manager to lead complex projects from start to finish.The ideal candidate should have over 5 years of IT experience and a strong command of Agile, Hybrid, and Waterfall methodologies.Responsibilities include managing project budget

Coordinating external consultants including architects, engineers, and contractors. Driving value engineering initiatives while maintaining quality and brand consistency.

We're a development team specializing in building ecommerce apps, themes, and enterprise sites for Shopify.With a team of 100 employees spread across North America and Europe, our innovative work has earned us recognition, including Shopify’s Commerce Award for UX and front-end development.Our por

A technology staffing firm in the United States is seeking a Technical Project Manager to oversee the integration of AI tools in a remote setting.You will manage project timelines, coordinate with third-party vendors, and provide day-to-day support for the team using Jira.The ideal candidate has ove

The Senior Project Manager will lead the end-to-end delivery of system modernization through both discovery and implementation phases.This role is responsible for managing a complex, multi-agency IT project aimed at transforming legacy processes into a modern, efficient digital platform.The Project

You’ll: Translate product and business objectives into clear execution plans with milestones, owners, and deadlines Track progress across engineering, product, legal, and design—ensuring nothing slips Run weekly sprint planning, stand‑ups, and retrospectives (we’re agile, not dogmatic) I

The NetSuite Project Manager is responsible for planning, executing, and finalizing NetSuite implementation projects within scope, budget, and timeline.This role involves coordinating with internal teams, clients, and stakeholders to ensure successful project delivery.The Project Manager will overse

A leading ecommerce development team is seeking a full-time remote Project Manager to maintain and grow client relationships.Responsibilities include managing expectations, collaborating across teams for project success, and identifying upselling opportunities.Ideal candidates should have strong cli

Discovery Project Manager Employment Type: Full-Time, Experienced Department: eDiscovery Management CGS is seeking an eDiscovery Project Managerto join our team supporting the legal organization within a large Federal agency.CGS brings motivated, highly skilled, and creative people together to solve

Our client, a top-tier legal discovery and managed services provider, is currently seeking a talented e‑Discovery Project Manager.The Project Manager must be located in one of the following states: Illinois, New Jersey, New York, California, Florida, Texas, South Carolina, Washington, D.Mary

Highly self‑motivated with a Consultative Sales approach, focused on long‑term fleet growth and technology upgrades, and has a basic to skilled understanding of Distributed Control Systems, Safety Instrumented Systems, Safety Integrity Level, with preferred experience in engineered valve sales.