Trabajos equipment engineer en Bay Shore, New YorkCrear alertas

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Manufacturing Engineer Contract role Bohemia, NY • Define and solve technical problems in manufacturing, assembly, and testing environments., • Implement cost-saving and process improvement initiatives on assigned product lines., • Collaborate with design engineering teams to enhance manufacturability of products., • Develop efficient production workflows and determine optimal sequencing of operations., • Prepare cost estimates for proposed projects and analyse cost factors., • Support facility layouts for manufacturing processes and equipment as needed., • Solve manufacturing challenges of varying complexity., • Design tools, fixtures, and gauges using SolidWorks or similar to improve manufacturing processes and address safety concerns., • 3D printing of fixtures., • Create detailed assembly work instructions using Microsoft Power Point., • Program laser printers and develop operator instructions for laser printing processes., • Utilize RTX-Lifecycle-Program-Management (RLPM) for New Product Introduction projects (NPI) to develop build plans for new designs., • Develop and maintain production routers and bill of materials., • Collaborate with quality and suppliers to resolve quality and technical issues., • Conduct compliance reviews to ensure conformance with customer specifications and requirements., • Support the project pipeline process to select, prioritize and scope projects to increase First Pass Yield and throughput across the value stream, • Support the project pipeline process to select, prioritize and scope projects to business objectives, integrated with other continuous improvement activities and CORE initiatives., • Drive targeted manufacturing process optimization activities using MRL tools such as Process Control Plans and PFMEA Qualification: • 'Bachelor’s degree in industrial, Manufacturing Engineering

Looking to push innovation forward? Join Radienz Living’s R&D team and help develop next-generation products in home and personal care. We’re looking for curious, solutions-driven individuals who thrive on experimentation, collaboration, and turning ideas into reality. Radienz Living is a leading North American manufacturer of home and personal care products, such as unit dose laundry and dish products, facial wipes, and baby wipes. With manufacturing plants and warehouses in Mt. Prospect and Bensenville, IL and Commack, NY, the company provides customers with private-label solutions and contract manufacturing services for products found in retail and institutional markets. Through its commitment to agility, innovation, trust and reliability, and sustainable creation, Radienz Living is passionate about providing its customers with products that support a cleaner way of living and a more radiant world. The company has undergone a remarkable transformation over the years, focusing on two product lines: Unit Dose products, where it is the undisputed leader in Private Label and Contract Manufacturing, and Personal Care Wipes, where it manufactures the wipes for the country's #1 beauty care brand. Our commitment to operational excellence is supported by robust quality systems, multiple GMP certifications, and a comprehensive suite of in-house labs—including FDA/EPA-certified microbiology, quality control, chemistry, and R&D facilities. This infrastructure enables us to deliver innovation, safety, and performance at every stage of the product lifecycle. Background: The Lab Technician plays a critical role in all wipe product testing activities at Radienz Living. This position is responsible for testing samples for baby, facial, and MTT (Moist Toilet Tissue) wipe products. The role partners closely with other R&D team members to support product development activities. Responsibilities: • Perform testing under guidance from Scientist or Engineer; follow test protocol and record the data and observations during testing, • Analyze experimental data, interpret results, and make data-driven recommendations., • Prepare and maintain technical documentation, including specifications, test reports, and other documentation., • Prepare samples in the specific formats for sales meetings, industry conferences, tests or other business initiatives, • Follow all laboratory safety practices, chemical handling procedures, and company safety policies. Required Qualifications: • Bachelor’s degree in science or engineering, or equivalent industry experience., • Working knowledge of Microsoft Office Suite, including Word, Excel, and PowerPoint for documentation, data analysis, and presentations., • Any experience related to R&D lab work is preferred., • Any technical experience related to formula, trials or product development is preferred, • Knowledge of laboratory safety practices, chemical handling, and documentation standards., • Basic knowledge of research and development laboratory environment., • Basic knowledge of quality standard of wipe product analysis., • Ability to manage multiple tasks and meet aggressive timelines., • Effective written and verbal communication skills, including technical documentation., • High level of attention to detail, • Ability to work independently while also contributing effectively within a team environment. Physical Demands: • Ability to lift and move materials up to 50 lbs., • Frequently required to stand or walk for extended periods while conducting experiments or operating equipment., • Regular use of hands and fingers to handle laboratory instruments, pipettes, testing tools, or small components., • Frequent reaching, grasping, pushing, or pulling when setting up equipment or retrieving materials., • Close vision and ability to focus on detailed data, instruments, gauges, or microscopic materials., • Ability to move between laboratory workstations, testing areas, and production floors as needed. Work Environment: • Work is primarily performed in a laboratory or manufacturing test environment., • May involve exposure to chemicals, laboratory reagents, or production materials, requiring proper PPE., • Moderate noise levels from laboratory or manufacturing equipment may occur. We’re looking for passionate, driven individuals who want to make an impact—within our organization and beyond. If you’re ready to grow, contribute, and be part of something meaningful, we’d love to hear from you. Why join Radienz Living: • Medical, dental, and vision coverage, • 401(k) with company match, • 11 paid holidays, plus paid time off (PTO), • Flexible spending accounts, • Life insurance, AD&D, and supplemental coverage, • Opportunities for career growth through hands-on R&D experience, innovation projects, and cross-functional collaboration Equal Opportunity Statement: Radienz Living is an Equal Opportunity Employer and is committed to fostering a diverse and inclusive workplace. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

FlexStaff is seeking a Senior Quality Engineer to join our client's team, a registered ISO 9001 company that designs and manufactures products for the military and aerospace industry. This position is permanent, full-time, onsite at their Deer Park location. The Senior Quality Engineer is responsible for implementing and executing inspection, testing, and evaluation methods to ensure that products meet or exceed company and customer quality standards. This role involves collaborating with internal teams, suppliers, and customers to maintain consistent product quality, drive continuous improvement, and promote a culture of quality throughout the organization. Quality Engineering Responsibilities: • Participate in root cause analysis of product or process failures., • Respond to, implement, and follow up on corrective actions for internal, supplier, and customer issues., • Schedule and prepare Material Review Board (MRB) meetings; track corrective actions and MRB outcomes., • Collect, organize, monitor, and distribute supplier quality and delivery performance data., • Ensure procedures and work instructions are documented in compliance with corporate and ISO standards., • Evaluate potential new suppliers through audits or self-assessment and oversee supplier qualification processes., • Support supplier evaluation programs to ensure key characteristics and in-process controls are well-defined and effective., • Assist with inspection processes and ensure purchased products are designed for manufacturability., • Clearly define product quality requirements and identify key characteristics for First Article Inspection (FAI)., • Prepare and review FAI and EIDP reports; improve supplier engagement in the FAI process to support product revisions and new product launches., • Maintain environmental lab testing equipment and perform environmental tests according to customer or engineering requirements., • Prepare and schedule test plans; provide recommendations, specifications, and data requirements., • Assist with environmental testing conducted by independent testing laboratories., • Perform internal audits and support the development and monitoring of key performance indicators (KPIs) for departments., • Operate and program measuring equipment, including CMMs, Zygo Interferometers, Spectrometers, and other precision instruments., • Conduct internal training sessions to ensure employees are familiar with quality procedures and best practices., • Perform basic incoming, in-process, and final inspections as needed. General Quality Responsibilities: • Support and promote a culture of quality throughout the organization., • Help ensure that company quality goals and compliance requirements are met., • Understand customer specifications and assist in meeting their requirements., • Maintain awareness of ISO 9001 standards and help ensure compliance., • Assist in developing and maintaining clear quality procedures and documentation., • Monitor and report on quality performance using data and inspection results., • Support continuous improvement efforts by identifying issues and recommending corrective actions., • Provide input for training needs related to quality processes. Additional Quality Support Tasks: • Assist with maintaining environmental lab equipment and testing processes., • Coordinate with independent labs for environmental testing as required., • Review inspection reports and support investigations on nonconforming products., • Support MRB (Material Review Board) processes., • Participate in contract reviews to address quality-related items., • Review customer specifications and communicate requirements to the team., • Assist with DMR (Discrepant Material Reports) and RMA (Return Material Authorization) evaluations., • Perform final, in-process, and source inspections of assemblies., • Assist with root cause investigations and failure analysis., • Support incoming, in-process, and final inspections as needed. Qualifications: • Bachelor’s degree in Engineering, Quality, or a related field preferred., • Experience with supplier quality management, audits, FAI processes, and ISO standards., • Proficiency with precision measurement tools and equipment (CMM, interferometers, spectrometers, etc.)., • Strong analytical, problem-solving, and communication skills., • Ability to manage multiple projects and work collaboratively across departments.

ATE Engineer – Hauppauge, NY · 10+ years overall experience in test system software & test hardware development · Strong knowledge in handling NI PXI, PCI Hardware ( DAQ Cards, Chassis). Integrate 3rd party hardware. · Experience in development/ Upgrading automated test equipment , avionics, aerospace programs is a plus. · High level of expertise in developing automated testing equipment for production testing of mixed-signal products and sub-assemblies for MIL/Aerospace applications including analog circuits, embedded microprocessors and FPGAs, and supporting circuitry and power supplies. · Experience or knowledge of RS422/RS232, ARINC, AFDX interface knowledge, TCP/IP & Ethernet, UDP and such communication standards, protocols and/or interfaces is desirable · Experience in managing Software code repositories and Continuous Integration/Deployment is highly desirable · Strong verbal and written communication skills. · Common I/O protocols (I2C, SPI, JTAG, RS-232, RS-422, RS-485, Arinc 429, MIL-STD-1553, etc). · Solid foundation of LabView expertise · High level of experience with hands-on troubleshooting and turn-on of new test systems, including test bench equipment such as multi meters, DAQs, spectrum analyzers, JTAG and ICE probes, software, oscilloscopes, etc. · Experience in qualifying embedded systems to MIL-STD-810 MIL-STD-461 or IEC equivalents · Skilled in the use of common test bench equipment such as multimeters, DAQs, oscilloscopes, power supplies, RF and optical spectrum analyzers · Hands-on and extremely strong in system bring-up, troubleshooting, calibration, etc. · High level of expertise in NI LabVIEW , Test Stand & Phyton · Experience in reading schematics · Experience in test equipment failure analysis and troubleshooting skills in a production environment. · Experience with prototyping solutions and bench testing methodology · Experience in testing to MIL-STD-810, MIL-STD-461, MIL-STD-1275, RTCA/DO-160 and IPC-610 requirements.

Our client is looking Manufacturing Engineer for Long Term project in Bohemia, NY (Onsite) Below is the detail requirement. Role: Manufacturing Engineer Location: Bohemia, NY (Onsite) Job Description: • Define and solve technical problems in manufacturing, assembly, and testing environments., • Implement cost-saving and process improvement initiatives on assigned product lines., • Collaborate with design engineering teams to enhance manufacturability of products., • Develop efficient production workflows and determine optimal sequencing of operations., • Prepare cost estimates for proposed projects and analyse cost factors., • Support facility layouts for manufacturing processes and equipment as needed., • Solve manufacturing challenges of varying complexity., • Design tools, fixtures, and gauges using SolidWorks or similar to improve manufacturing processes and address safety concerns., • 3D printing of fixtures., • Create detailed assembly work instructions using Microsoft Power Point., • Program laser printers and develop operator instructions for laser printing processes., • Utilize RTX-Lifecycle-Program-Management (RLPM) for New Product Introduction projects (NPI) to develop build plans for new designs., • Develop and maintain production routers and bill of materials., • Collaborate with quality and suppliers to resolve quality and technical issues., • Conduct compliance reviews to ensure conformance with customer specifications and requirements., • Support the project pipeline process to select, prioritize and scope projects to increase First Pass Yield and throughput across the value stream, • Support the project pipeline process to select, prioritize and scope projects to business objectives, integrated with other continuous improvement activities and CORE initiatives., • Drive targeted manufacturing process optimization activities using MRL tools such as Process Control Plans and PFMEA Qualification: Bachelor’s degree in industrial, Manufacturing Engineering

FlexStaff is seeking a Senior Quality Engineer to join our client's team, a registered ISO 9001 company that designs and manufactures products for the military and aerospace industry. This position is permanent, full-time, onsite at their Deer Park location. The Senior Quality Engineer is responsible for implementing and executing inspection, testing, and evaluation methods to ensure that products meet or exceed company and customer quality standards. This role involves collaborating with internal teams, suppliers, and customers to maintain consistent product quality, drive continuous improvement, and promote a culture of quality throughout the organization. Quality Engineering Responsibilities: • Participate in root cause analysis of product or process failures., • Respond to, implement, and follow up on corrective actions for internal, supplier, and customer issues., • Schedule and prepare Material Review Board (MRB) meetings; track corrective actions and MRB outcomes., • Collect, organize, monitor, and distribute supplier quality and delivery performance data., • Ensure procedures and work instructions are documented in compliance with corporate and ISO standards., • Evaluate potential new suppliers through audits or self-assessment and oversee supplier qualification processes., • Support supplier evaluation programs to ensure key characteristics and in-process controls are well-defined and effective., • Assist with inspection processes and ensure purchased products are designed for manufacturability., • Clearly define product quality requirements and identify key characteristics for First Article Inspection (FAI)., • Prepare and review FAI and EIDP reports; improve supplier engagement in the FAI process to support product revisions and new product launches., • Maintain environmental lab testing equipment and perform environmental tests according to customer or engineering requirements., • Prepare and schedule test plans; provide recommendations, specifications, and data requirements., • Assist with environmental testing conducted by independent testing laboratories., • Perform internal audits and support the development and monitoring of key performance indicators (KPIs) for departments., • Operate and program measuring equipment, including CMMs, Zygo Interferometers, Spectrometers, and other precision instruments., • Conduct internal training sessions to ensure employees are familiar with quality procedures and best practices., • Perform basic incoming, in-process, and final inspections as needed. General Quality Responsibilities: • Support and promote a culture of quality throughout the organization., • Help ensure that company quality goals and compliance requirements are met., • Understand customer specifications and assist in meeting their requirements., • Maintain awareness of ISO 9001 standards and help ensure compliance., • Assist in developing and maintaining clear quality procedures and documentation., • Monitor and report on quality performance using data and inspection results., • Support continuous improvement efforts by identifying issues and recommending corrective actions., • Provide input for training needs related to quality processes. Additional Quality Support Tasks: • Assist with maintaining environmental lab equipment and testing processes., • Coordinate with independent labs for environmental testing as required., • Review inspection reports and support investigations on nonconforming products., • Support MRB (Material Review Board) processes., • Participate in contract reviews to address quality-related items., • Review customer specifications and communicate requirements to the team., • Assist with DMR (Discrepant Material Reports) and RMA (Return Material Authorization) evaluations., • Perform final, in-process, and source inspections of assemblies., • Assist with root cause investigations and failure analysis., • Support incoming, in-process, and final inspections as needed. Qualifications: • Bachelor’s degree in Engineering, Quality, or a related field preferred., • Experience with supplier quality management, audits, FAI processes, and ISO standards., • Proficiency with precision measurement tools and equipment (CMM, interferometers, spectrometers, etc.)., • Strong analytical, problem-solving, and communication skills., • Ability to manage multiple projects and work collaboratively across departments.

NOTICE: The posting for local applicants only - is not for those applying for a global assignment and/or for employees working outside of Cipla's U.S. Subsidiaries or Affiliates. Job Title: QA Validation - DPI FLSA Classification: Professional, Exempt Work Location: Unit 1, Hauppauge, NY Work Hours: General: 8:30AM - 5:00PM (may vary based on business needs) Reports To: QA Validation Manager Salary Range: $66,300 - $86,000 Purpose: The incumbent to this role performs and oversees cGMP compliance-based services (commissioning, qualification, validation, consulting, etc.) on equipment and facilities and utilities associated with pharmaceutical manufacturing and drug product development. Job Overview Responsible for the coordination of supportive equipment and process validation activities such as testing, calibration, scale-up, engineering and validation studies, and assurance that the necessary project documentation is complete, accurate and in compliance with cGMP regulations. The job duties for this position include but are not limited to the following: • Maintain compliance of the validation program to ensure all equipment, facility and utilities are qualified for pharmaceutical processes., • Oversee equipment calibration and preventative maintenance program by setting and confirming scheduling of all outside contractors and maintaining the equipment database, reviewing, and approving service support certificates/documents., • Prepare documents following established standards and templates, including but not limited to the following: commissioning Forms, protocols and reports, SOPs, impact assessment, specifications URS/FRS/DDS, FATs/SATs etc., • Perform work to meet company' requirements and quality standards., • Represent facility and engineer to communicate with internal and external stakeholders. Provide consistent, complete, and timely feedback, project status and issues, and reports to project managers and senior management., • Maintain departmental compliance pertaining to departmental SOPs, periodic review and reporting of the environmental monitoring system., • Generate, review, approve and maintain Validation Master Plan and summary reports and other Process validation lifecycle documents., • Evaluate process validation projects to establish protocols and test plans., • Collect and analyze all data, write final reports and obtain approvals., • Review technical documentation such as batch records, SOPs, calibration records, preventive maintenance work orders, protocols, reports., • Perform gap assessments and remediation as required on legacy validation packages., • Interface with the FDA and customers during site audits to respond to validation-related questions., • Assist in deviation investigation and resolution of problems and oversee change control requirements for all projects and work orders. Education and Experience • A bachelor's degree in scientific discipline (e.g., biology, chemistry, pharmacy) or a related field., • Must be proficient in computer skills and software applications such as Microsoft Office tools and Quality applications and software programs., • Minimum 1-2 years' experience in pharmaceuticals (DPI, MDI, oral solid or Injectables preferred). Technical Knowledge and Computer Systems Skills • Effective interpersonal relationship skills and the ability to work in a team environment., • Capable of conducting troubleshooting, investigations and root cause identification and analysis., • Capable of supporting and participating in compliance and regulatory audits at the local and federal levels., • Ability to work in a fast-paced, dynamic environment within a manufacturing operation setting., • Must be able to communicate clearly and concisely across all levels of the organization and possess a solid command of English language communication skills verbally, written, and interpersonally., • Must possess strong documentation and technical writing skills, and able to apply relevant scientific principles and practices., • Must be able to work under minimal supervision and able to work independently and in a team environment. Professional and Behavioral Competencies • Proficiently speak English as a first or second language andability to read, write and communicate effectively the same., • Must be a self-starter and demonstrate initiative to seek additional training or direction as needed., • Must be willing and able to work any assigned shift ranging from first or second shift; work schedules may be Monday to Friday., • Knowledge of good manufacturing practices and good documentation practices preferred., • Self-motivated, with the ability to work in a fast-paced manufacturing environment and handle multiple tasks simultaneously., • Excellent organizational skills with the ability to focus on details. Work Schedule and Other Position Information • Must be willing to work in a pharmaceutical manufacturing setting., • Must be willing to work some weekends based on business needs as required by management., • No remote work available., • This role works in cGMP laboratory or manufacturing environment, where personal protective equipment (PPEs) is required, which may include uniforms, lab coats, safety glasses, respiratory protective equipment, hearing protection, etc., • The role may be assigned on a work Weekend or Holiday work may be requested or required based on business needs. GLOBAL COMPANY Cipla is a leading global pharmaceutical company, dedicated to high-quality, branded and generic medicines. We are trusted by healthcare professionals and patients across geographies. Over the last eight decades, we have strengthened our leadership in India's pharmaceutical industry and fortified our promise of strengthening our global focus by consolidating and deepening our presence in the key markets of India, South Africa, the U.S., and other economies of the emerging world. Cipla employs handpicked professionals not just for their knowledge and experience but for their zeal to make a difference to the world of healthcare. The company believes that our biggest assets are the employees who lead us to prosperity and growth in the future. Driven by the vision, none shall be denied, Cipla's focus has always been on making affordable, world-class medicines with a reputation for uncompromising quality standards across the world. CIPLA NEW YORK (INVAGEN PHARMACEUTICALS, INC.) About InvaGen Pharmaceuticals, a Cipla subsidiary InvaGen Pharmaceuticals, Inc. is engaged in the development, manufacture, marketing, and distribution of generic prescription medicines with focus on a range of therapeutic areas, including cardiovascular, anti-infective, CNS, anti-inflammatory, anti-diabetic, and anti-depressants. The company was founded in 2003 and is based in Central Islip and Hauppauge, New York. As of February 18, 2016, InvaGen Pharmaceuticals, Inc. operates as a subsidiary of Cipla (EU) Limited. EEO Statement Cipla is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status. About the Salary/ Pay Range: The salary range mentioned above is an anticipated base salary range for this position. Exact salary depends on several factors such as experience, skills, education, and budget. Salary range may vary based on geographic location. In addition to base salary, this position may be eligible for benefits and participation in a bonus program based on performance and company results.

For more than 50 years, ENSCO has been providing leading-edge engineering, science and advanced technology solutions to governments and private industries worldwide. ENSCO prides itself in creating and applying advanced technologies for mission success. We provide systems engineering, integration, and advanced technology services to transform the future safety, security, and resiliency of critical missions on the ground, in the air, in space, and in the information systems that connect these domains. At ENSCO Avionics, we take our tagline "Ideas to Reality" very seriously. Joining ENSCO is an opportunity to advance humankind through technological and scientific discovery. Our dedicated workforce is diverse --in background, experience, skills, and interests. ENSCO Avionics employees are encouraged to be courageous and innovative in their ideas and work collaboratively to help develop cutting-edge technology and inventions that make future dreams a reality. ENSCO Avionics offers a supportive and unique culture, positive work environment, and flexible work schedules that empower its employees to achieve their maximum potential. ENSCO Avionics is looking for a software verification engineer to augment our team supporting a local customer. Your work will include requirements, design, and code reviews, tests design, review, and execution both on an Hardware in Loop test equipment and a low-level testing tool. If you have the skills, experience, and desire to join our talented team and contribute to the needs of today's modern aircraft, we want to talk to you about this opportunity. Qualifications Required: * BS degree in Electrical Engineering, Computer Science, Computer Engineering, or Equivalent * Hands on experience with C or equivalent * Excellent interpersonal skills including working in team environment * Ability to work independently * Strong verbal and written communication skills * High level of professionalism, work ethic, and attention to quality * Must be a U.S. Citizen (not Dual Citizen) Qualifications Desired: * Experience with DO-178C * Experience with Software Verification Required Certifications: None U.S. Citizenship Required: Yes Security Clearance Required: None Employment Type: Regular Full-time Background Check Type: 7 Year Drug Screen Required: None Position Contingent Upon Contract Award: Yes Salary Range$65,000—$90,000 USD REAL ID Requirement This position may require the ability to access to U.S. federal facilities. In accordance with the Department of Homeland Security's enforcement of the REAL ID Act, as of May 7, 2025, individuals must present a REAL ID-compliant form of identification or an acceptable alternative to gain entry. For a list of acceptable forms of identification, ___. Benefits At ENSCO, a positive working environment and a competitive salary are only part of the reason for choosing a career here. We offer a comprehensive benefits package that creates a stimulating and supportive environment where you can thrive - visit___ to learn more. Export Control and Licensing This position may involve access to technology or technical data that is controlled under U.S. export control laws and regulations and the release of which to a non US person may require an export license from the U.S. Government. Privacy Your data privacy is important to ENSCO. Please ___. California residents can ___. EEO Statement ENSCO, Inc. and its wholly owned U.S. subsidiaries are Equal Opportunity Employers- veterans, disability

Job Summary \n The Manufacturing Engineer 2 is responsible for the breakdown and definition of the labor effort required in accordance with Engineering and Quality Assurance specifications. \n Essential Functions \n\n • Compute cost estimates for new designs, and new customer designs, including established designs to reflect current goals and cost. \n, • Prepare detailed plan-schedule, estimates, and requisitions for special tooling and/or test equipment needed to manufacture and/or assemble parts to engineering requirements.\n, • Design and prepare tooling drawings such as drill, milling and assembly fixtures, punch and dies, etc. Prepare operation sheets for building assemblies. \n, • Make sketches as required to clarify fabricating or processing of parts, tools, or assemblies. \n, • Investigate shop problems with tools, parts or assemblies and applies the necessary corrective action with the affected work center. \n, • Coordinate with Engineering in the development of cost effectiveness and feasibility of new designs, as well as manufacturing and assembly methods. \n, • Incorporate engineering change orders to operation sheets. \n, • Liaison between manufacturing vendors and Purchasing Department. \n, • Prepare statements of work authorizing and guiding subcontractors in the fabrication of parts. \n, • Interface with subcontractors/customers in resolving manufacturing or drawing interpretation problems. \n, • Create and enter the Bill of Material and material code numbers in the Material Requirements Planning (MRP) system. \n, • Must be a U.S. Citizen.\n, • Ability to read, write and speak English proficiently.\n, • High School Diploma, GED or Industry experience preferred. \n, • Medical Dental, Vision, \n, • Life Insurance, Long-Term Disability \n, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD)\n, • PTO (3 weeks accrued first year!) \n, • 10 Paid Holidays \n, • Flexible Spending Accounts\n, • 401(k) with matching\n, • Pet Insurance\n \n \tFor more information, or to apply now, you must go to the website below. Please DO NOT email your resume to us as we only accept applications through our website.

Date Posted: 2026-02-20 Country: United States of America Location: US-NY-BOHEMIA-355 355 Knickerbocker Ave KNICKERBOCKER Position Role Type: Unspecified U.S. Citizen, U.S. Person, or Immigration Status Requirements: Security Clearance Type: Security Clearance Status: Not Required Aerospace Lighting Corp. d/b/a Collins Aerospace has an opening for a Senior Engineer, Engineering-Operations in Bohemia, NY. Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. What YOU will do \n • Plan and perform professional manufacturing engineering activities with various complexities by applying engineering design principles and product line experience.\n, • Apply engineering principles to design, develop, test and implement various assembly fixtures and aid tools.\n, • Prepare plan, process specifications and procedure, MRP support studies, factory cost work.\n, • Conduct analysis and test of routine degree of complexity.\n, • Analyze engineering data and change notices to create manufacturing bill of materials and routings for various product lines.\n, • Implement, develop and maintain product/process improvement.\n, • Perform root cause analysis with various teams.\n, • Analyze and find solutions technical, operation and quality issues related to production line.\n, • Participate in product review and evaluate manufacturability of new product designs.\n\n Qualifications You Must Have \n • Must possess at least a bachelor's degree or its equivalent in Mechanical Engineering, Manufacturing Engineering or a related field and at least 5 years of progressive experience as a Mechanical Engineer, Manufacturing Engineer or related role in an industrial manufacturing environment. In the alternative, must possess at least a master's degree or its equivalent in Mechanical Engineering, Manufacturing Engineering or a related field and at least 3 years of experience as a Mechanical Engineer, Manufacturing Engineer or related role in an industrial manufacturing environment would be acceptable.\n, • Must possess at least 3 years of experience supporting a Manufacturing Shop Floor in the Aerospace industry with use of Macola, Teamcenter and SharePoint.\n, • Must possess at least 3 years of experience with 3D CAD design software and manufacturing drawing creation, with Expert Level Knowledge in 3D Design Tools (Solid Edge, CATIA, SOLIDWORKS).\n, • Must possess at least 3 years of experience implementing Lean Manufacturing Principles and methodologies.\n, • Must possess at least 3 years of experience designing assembly and testing fixtures for complex aircraft lighting products.\n, • Non-US Person - Must be authorized to work in the U.S. without the company's immigration sponsorship now or in the future. The company will not offer immigration sponsorship for this position. The company will not seek an export authorization for this role. \n\n Learn More & Apply Now! Interiors: At Collins Aerospace, our Interiors team is focused on innovation, safety and cost efficiency. But we don't just get people from point A to point B. We're committed to making air travel more comfortable, connected and secure. As a leader in aviation interior products and services, we're helping airlines and original equipment manufacturers create a positive experience for their customers. With offices and manufacturing facilities in more than 12 states across the U.S. and more than 10 countries around the globe, we're changing the game of aircraft interiors. Are you ready to join our team? Onsite: Employees who are working in Onsite roles will work onsite. This includes all production and maintenance employees, as they are essential to the development of our products. The salary range is $129,251.00 to $182,000.00 USD per year. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

NOTICE: The posting for local applicants only - is not for those applying for a global assignment and/or for employees working outside of Cipla's U.S. Subsidiaries or Affiliates Job Title PLC/Electrical Automation Engineer Organization Name InvaGen Pharmaceuticals, Inc. Location Hauppauge, NY Employment Type Full Time - Exempt Salary Range (Base/salary) $72,800 - 93,600 Annual Salary Benefits In addition to a fulfilling career and competitive salary, the Company offers a comprehensive benefits package to include a 401(k) savings plan and matching, health insurance - medical/dental/vision, health savings account (HSA), flexible spending account (FSA), paid time off (PTO) - vacation/sick/flex time, paid holidays, short-term disability (STD), long-term disability (LTD), parental leave, paid family leave, employee discounts, and other benefits. Work Hours/ Shift/ Remote General 8:30 am-5:00 pm Responsibilities/ Accountabilities • Manage all phases of electrical and control equipment throughout the plant. This includes preventive, corrective, emergency, warranty service, etc., • Diagnose and solve electrical problems for manufacturing and packaging equipment and systems., • Install, service, calibrate, and update electrical systems., • Repair and/or replace faulty electrical parts in manufacturing and packaging equipment., • Conduct inspections to ensure that products or systems are in a safe and usable condition., • Troubleshoot programmable logic controllers (PLC)/industrial programmable controllers (IPC)., • Assess building systems to plan work assignments and project schedules., • Develop maintenance procedures and schedules., • Ensure equipment maintenance and repair work are completed correctly and in a timely manner., • Plan and perform PMP for equipment and facilities. Education Qualifications/Experience • Bachelor's degree in electrical engineering or related field of study from an accredited institution with a preferred minimum of five (5) years of relevant work experience in an industrial / manufacturing setting., • Master's degree in electrical engineering or related field of study from an accredited institution with a minimum of three (3) years of relevant work experience in an industrial / manufacturing setting preferred., • Experience working in pharmaceutical manufacturing preferred. Skills/ Competencies • In-depth understanding of electronics, electrical systems, and mechanical engineering principles., • Advanced working knowledge of Microsoft Office Suite, AutoCAD and of computer operations in general., • Familiarity with Programmable Logic Controllers and Distributive Control Systems., • Ability to read electrical prints., • Ability to read P&IDs., • Ability to trouble shoot OMRON PLC hardware., • Ability to trouble shoot OMRON PLC logic utilizing OMRON software., • Ability to trouble shoot Allen Bradly PLC hardware., • Ability to trouble shoot Allen Bradley PLC logic utilizing Allen Bradley, • Working knowledge of 480V and 4160V electrical switchgear, motors, and starters., • Experience working from complex drawings and data, manuals, handbooks., • Experience using a wide variety of measuring instruments and electronic analyzing and testing equipment., • Thorough knowledge of electronic components, digital and analog circuitry, hydraulic systems, and machine tool principles essential., • Knowledge of GMP and various regulatory requirements., • Strong leadership skills and experience in industrial automation., • Ability to lead teams and facilitate the execution and completion of work., • Communicate effectively (verbal, written, presentation skills) in the English language., • Contribute and work collaboratively with geographically dispersed teams in HR and across other functional departments., • Apply practical knowledge of job area typically obtained through advanced education and work experience., • Work independently with general supervision., • Influence others within the job area through explanation of facts, policies, and practices., • Keen attention to details and must demonstrate use of good judgement and decision-making., • Excellent analytical, critical thinking, and problem-solving skills. Physical Requirements • Able to lift fifteen (15) pounds with or without assistance., • Able to frequently stand, bend, walk, sit, climb, balance, stoop or crouch, kneel, reach, push, pull, grasp, feel, talk, write, type, listen and hear., • Must be willing to work any shift or site as required., • Must be able to travel domestically and internationally as needed (less than 20%)., • Able to be able to wear personal protective equipment (PPE) such as hard hat, hair net, safety shoes, glasses, lab coat, and other required gear. About Cipla Cipla is a leading global pharmaceutical company, dedicated to high-quality, branded, and generic medicines. We are trusted by healthcare professionals and patients across geographies. Over the last eight decades, we have strengthened our leadership in India's pharmaceutical industry and fortified our promise of strengthening our global focus by consolidating and deepening our presence in the key markets of India, South Africa, the U.S., and other economies of the emerging world. Driven by the purpose 'Caring for Life', Cipla's focus has always been on making affordable, world-class medicines with a reputation for uncompromising quality standards across the world. In the last 85 + years, Cipla has emerged as one of the most respected pharmaceutical names in India as well as across more than 100 countries. Cipla is a fast-growing pharmaceutical company with a continued focus on the expanse of our strong legacy. Over the last five years, Cipla has significantly expanded its portfolio and presence in the U.S. with both a generic and brand division. InvaGen Pharmaceuticals, Inc. InvaGen Pharmaceuticals is a Cipla subsidiary engaged in the development, manufacture, marketing, and distribution of generic prescription medicines with focus on a range of therapeutic areas, including cardiovascular, anti-infective, CNS, anti-inflammatory, anti-diabetic, and anti-depressants. The company was founded in 2003 and is based in Central Islip and Hauppauge, New York. In October 2020, InvaGen established its project site in Fall River, Massachusetts to support the launch of Cipla's respiratory business in the United States. Equal Opportunity Employer Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. At Cipla, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require reasonable accommodation to make your application or interview experience a great one, please contact the recruiter. About the Salary/ Pay Range: The salary range mentioned above is an anticipated base salary range for this position. Exact salary depends on several factors such as experience, skills, education, and budget. Salary range may vary based on geographic location. In addition to base salary, this position may be eligible for benefits and participation in a bonus program based on performance and company results.

SCHENCK USA IS SEEKING TO HIRE FIELD ENGINEERS IN 2026! Are you a hands-on expert when it comes to complex machinery? Is troubleshooting mechanical challenges your specialty? Come Join Our World Class Team! Apply Today for Field Service Engineer! What We Offer: • Great benefits, • Employee Appreciation, • Employee Recognition through Service Award Point System with Amazon., • Training Development, • Travel Opportunities Why work for Schenck? Click the link below to learn more: What the Ideal Candidate will do: The Field Service Engineer will provide customer service and technical support by installing equipment, investigating, resolving customer reports of technical problems, and eliminating future operational or service difficulties by performing the following duties: • This position is regional and covers the West Coast region. The ideal candidate lives in the Los Angeles, CA area., • Commissions, calibrates, and services new or modified equipment at customer's facility to ensure full functionality according to specifications., • Reviews performance reports and documentation from customers and field representatives and inspects malfunctioning or damaged product to determine nature and scope of problem., • Analyzes review and inspection findings to determine source of problem, and recommends repair, replacement, or other corrective action., • Coordinates problem resolution with engineering, customer service, and other personnel to expedite repairs., • Provides on-site technical assistance to help troubleshoot and repair equipment., • Develops and conducts training on the safe operations of the equipment and demonstrates skills to trainees, including both team members and customers., • Associate's degree in mechanical discipline from a two-year college or technical school. Bachelor's Degree in engineering preferred., • 3+ years of related experience and/or training; or equivalent combination of education and experience., • Must have mechanical and electrical skills having experience in a production/assembly line type of environment., • Proficient in DVM, O-Scope, and instruments used in troubleshooting of electro schematics diagrams., • Must have PLC/Automation skills., • Must be able to read and interpret documents such as technical drawings, operating/maintenance instructions, and procedure manuals., • Must be able to write routine reports and correspondence. Must possess strong communication, math, and computer skills. SAP experience preferred. • Travel up to 80% of the time, sometimes internationally.

The Apprentice Engineer is responsible for supporting maintenance and operations staff in the safe and efficient upkeep of the facility. This role involves hands-on assistance with equipment care, Apprentice, Maintenance Technician, Operations, Engineer, Skilled Trades.

A Production Test Engineer I is an essential part of our production and engineering teams. You work closely with engineering and production personnel, utilizing your advanced knowledge of electronic measuring equipment and testing methodologies to perform bench level and automated testing, including

Job Description The Senior Building Controls Technician will provide services related to the expansion, upgrade or replacement of building automation hardware and software for smart building infrastructure. The position will work independently to meet project requirements with limited supervision. The programmer will be responsible for programming, configuring, and testing of Direct Digital Control (DDC) building automation and control systems. Responsibilities/Duties: * Design and engineer control system hardware and software programming based on project plans, specifications, and other contract documents * Ability to program projects with various levels of complexity * Capable of performing network troubleshooting, database troubleshooting and repair programming * Collaborates with the engineering team on the system configuration, network and software requirements, graphics, programming, and sequences of operations * Develop and configure the sequence of operations, programming, graphics, database, network, and integrations into third party systems * Maintains accurate and thorough project documentation and redlines * Provides owner training as required by the project * Executes system commissioning and functional testing * Assist in installation of control hardware * Startup and commission new hardware installations * Provide project management assistance on projects as required, interfacing directly to customers * Supervise sub-contractors and suppliers as needed * Help educate lower-level technicians through on the job training as needed Required Skills * Excellent verbal and written communication skills * Proficient in Microsoft Office Suite or related software * Programming skills * Strong analytical skills * Strong interactive and communication skills * Strong troubleshooting skills * Experience with electronics and basic electrical circuits * Thorough understanding of and ability to use appropriate tools * Excellent customer service and ability to work well with others * Knowledge of DDC Control Theory and Applications as related to HVAC equipment * Strong knowledge of common DDC communications protocols such as but not limited to BACnet, LON, Modbus, etc. Required Experience/Education * At least 5-10 years of experience with programming, startup and commissioning of control systems * Niagara N4 certification * Experience with multiple manufacturers of controls a plus * Technical knowledge with installation of controls equipment and ancillary devices Physical Requirements * Physically able to climb overhead or crawl under spaces to complete jobs. * Must be willing to work at heights. * Must be able to lift up to 35 pounds at times. Salary Range: $80,000-$110,000

Job Description Job Summary The Design Engineer 3 is a senior level engineer who provides engineering support on systems, system elements, interfacing systems, components, devices and/or processes. Possesses broad knowledge of industry practices, standards, and technology areas. Works as either technical or programmatic lead of a team and assists with solving complex problems in an engineering discipline. Develops strategic and implementation plans. Essential Functions • Works on multiple highly complex major projects requiring innovative, original solutions, • May plan multiple projects simultaneously. Estimates, tracks & completes project on time and within budget., • Subject Matter Expert in at least one area or system., • Strong technical, proposal and report writing skills with ability to collect or generate all necessary backup material., • Exercises considerable latitude and technical judgment in deciding work methods., • Can lead a group of engineers and technicians, responsible for budget and manpower estimates., • Develops innovative solutions to unique problems., • Works mostly independently with minimal supervision., • Exercises substantial initiative/ judgment in work methods and in interpreting goals., • Able to give effective presentations to critical/high level customers., • Knowledgeable in all technical areas of the group's scope or having a demonstrated ability to achieve that level of proficiency in a short period of time., • Responsible for large and fairly complex projects., • Ability to work well with and mentor both high and low performers in a team or group environment, setting expectations, and providing input and feedback in a helpful way that fosters accountability. Ability to deal with personnel problems in a constructive manner., • Proven leadership skills. Identifies problems and actively devises appropriate solutions., • U.S. Citizenship Required., • BSME or equivalent educational degree required., • Minimum six (6) years or demonstrated capability in an Engineering role, experience within a manufacturing environment and aerospace industry preferred., • Strong knowledge of AS9100 and ISO requirements., • Ability to read, write, and speak in English proficiently., • Strong work ethic; can work independently or in a group., • Highly professional with excellent telephone etiquette., • Medical Dental, Vision,, • Life Insurance, Long-Term Disability, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD), • PTO (3 weeks accrued first year!), • 10 Paid Holidays, • Flexible Spending Accounts, • 401(k) with matching, • Pet Insurance Reports To: Engineering Manager FLSA Classification: Exempt Job Type: Full time EOE/Disability/Veteran EAST/WEST INDUSTRIES INC. is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Job Description Mechanical Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This role is responsible for documenting and supporting the research, design, development and diagnosis integrated x-ray sources and high voltage generators within a manufacturing environment. Job Description: • Responsible for creating and maintaining Mechanical Engineering Change Notices, • Create and modify concept drawings, detailed design, assembly and fabrication drawings; BOMs and other related design documentation, • Work with cross-functional team to design and develop new products and improve existing designs, • Generate 2D and 3D designs using SolidWorks, • Create and properly document detailed drawings complying with metric standards, • Create, maintain and share process documentation in ERP system and SharePoint, • Regular communication with other engineering disciplines, the sales and production teams, • Follow all VJX and OSHA workplace safety requirements and policies, • Bachelor’s Degree or higher in Mechanical Engineering, • One internship or limited experience in a manufacturing environment, • Familiarity with manufacturing processes and mechanical components, • Proficiency in reading and interpreting detailed mechanical drawings, • Superior written and verbal communication skills, • Must be a highly organized, self-motivated, team player, • Demonstrated working knowledge of SolidWorks or similar software, • Proficient in Microsoft Office Suite, • Experience in electro-mechanical design, • Minimum 2 years of mechanical design experience, • Experience working with ERP systems, • Regularly required to sit, walk, bend, stoop and stand within an industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and possibly operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone, via email and on other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required.On a regular basis, will be required to:, • Use written and oral communication skills, • Read and interpret data, information and documents, • Be creative, make judgements, use reasoning and make decisions, • Observe and interpret situations, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Tuition assistance The RF Engineer applies principles of RF/Electrical Engineering to solve complex technical challenges in research, development, and manufacturing environments. The role focuses on the design, development, testing, and production of RF Power Amplifier devices and systems, providing solutions to both routine and complex engineering issues under general supervision. Key Responsibilities: • Evaluate and test RF circuits, systems, and modules to meet specifications; modify as needed to achieve performance goals, • Conduct Acceptance Test Procedures (ATPs) on complete RF Power Amplifier Systems, • Develop and prototype new RF power amplifier gain stages, ensuring compliance with high-performance specifications, • Collaborate with engineering and manufacturing teams to ensure accurate data transfer and process control during product transition to manufacturing, • Design and develop next-generation RF systems specifically tailored for defense and medical applications in the IMHZ-2GHZ range, • Provide technical support and coordination to facilitate product development, manufacturing, and the transition of new designs into production, • Assist in preparing technical bids and proposals; occasionally attend customer design reviews and field-testing activitiesQualifications: Education: • Bachelors degree in Electrical Engineering (BSEE), Mechanical Engineering, Applied Science, or equivalent experience without a degreeExperience:, • 35 years of experience in microwave/RF design and developmentTechnical Skills:, • Proficiency in RF/microwave design and PCB layout, • Hands-on experience with testing, tuning, and modifying RF circuits, • Familiarity with CAD and simulation tools (ADS, HFSS, AutoCAD, PADS is a plus), • Skilled in using RF test equipment such as network analyzers, spectrum analyzers, power meters, and oscilloscopesSpecialized Knowledge:, • Experience in high-power solid-state amplifier design, • Familiarity with both packaged surface mount components and bare die technologies, • Experience with circuits operating up to 2GHZPreferred Qualifications:, • Proven experience in designing high-power solid-state RF amplifiers, • Knowledge of advanced simulation tools and RF design techniques, • Willingness and ability to travel occasionally for customer support and field service

Job Description Engineer the Future of Manufacturing – Join as a Manufacturing Engineer in Aerospace Location: Bohemia, NY Job Type: Full-Time Consultant (18 Months) Schedule: Monday–Friday | 1st Shift (7:00 AM – 3:30 PM) Pay Rate: 75.56 per hour Turn Innovation into Reality on the Production Floor PDS Tech Commercial is partnering with a leader in the aerospace industry to hire a driven Manufacturing Engineer. In this role, you’ll bridge the gap between design and production—developing smarter processes, improving efficiency, and ensuring high-quality manufacturing outcomes in a fast-paced, highly regulated environment. If you’re passionate about solving complex problems and optimizing production systems, this is your opportunity to make a measurable impact. What You’ll Do As a Manufacturing Engineer, you will: • Define and solve technical challenges across manufacturing, assembly, and testing environments, • Drive cost-saving initiatives and continuous process improvements, • Collaborate with design engineering teams to enhance product manufacturability, • Develop production workflows and optimize sequencing of operations, • Prepare cost estimates and analyze production cost drivers, • Support facility layouts and equipment integration for manufacturing processes, • Design tools, fixtures, and gauges using SolidWorks or similar software, • Leverage 3D printing to create innovative fixtures and tooling solutions, • Develop detailed assembly work instructions and operator guides, • Program laser printing systems and create related process documentation, • Utilize RLPM tools to support New Product Introduction (NPI) and build plans, • Maintain production routers and bills of materials (BOMs), • Partner with quality teams and suppliers to resolve technical and quality issues, • Conduct compliance reviews to ensure adherence to customer and regulatory requirements, • Lead process optimization initiatives using PFMEA, control plans, SPC, and RCCA methodologies, • Bachelor’s degree in Engineering, • Proficiency with MS Office tools (Word, Excel, PowerPoint), • Experience in fast-paced and/or highly regulated aerospace or manufacturing environments, • Experience supporting machine operations, tooling/fixture design, and production processes, • Familiarity with CNC programming concepts and manufacturing workflows, • Strong analytical, organizational, and problem-solving skills, • Knowledge of PFMEA, SPC, RCCA, control plans, and configuration control practices, • Excellent communication and collaboration skills across cross-functional teams, • Ability to manage multiple priorities and lead initiatives independently, • This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license. Preferred Qualifications: • Experience in engineering, manufacturing, or production environments, • Proficiency with 3D modeling tools such as SolidWorks, • Familiarity with continuous improvement frameworks and lean methodologiesWhy Join Us, • Innovate at Scale: Play a key role in optimizing aerospace manufacturing processes, • Hands-On Impact: See your solutions implemented directly on the production floor, • Collaborative Culture: Work alongside engineering, quality, and operations experts, • Advanced Tools & Technology: Utilize modern tools including 3D printing and advanced manufacturing systems, • Career Growth: Expand your expertise in a high-demand, high-impact field Apply today and help shape the future of aerospace manufacturing. Pay Details: 75.56 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description High Voltage Electrical Engineer VJ X-Ray LLC (VJX) is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. A High Voltage Electrical Engineer at VJX is engaged in technical projects that include design, assembling, wiring, testing and troubleshooting complex, electro-mechanical, integrated x-ray sources and high voltage generators. Job Description: • Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies for x-ray applications, • Test, troubleshoot and debug electrical components and systems, • Regularly work with power output up to 450 kV and up to 6kW, • Work on multiple projects varying in complexity from inception to completion, • Analyze equipment to establish operating data and conduct experimental tests, • Works with technical personnel to ensure prototype models are assembled according to design specification, • Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards, • Generate, revise or finalize BOMs, • Create and maintain engineering reports, • Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software and special projects) on system designs and to help resolve customer issues and provide world class customer service, • Participation in the creation of technical documentation, system manuals and customer facing documentation, • Follow all VJX and OSHA workplace safety requirements and policies, • Bachelor’s Degree in Electrical Engineering, • Minimum of 3 years of experience in a manufacturing environment, • Strong working knowledge of power supplies, electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams, • Knowledge of analog circuit design, • Familiarity with soft switching techniques, schematics capture and PCB layout, • Ability to solve complex technical problems with minimal supervision, • Experience with a variety of testing equipment including but not limited to Oscilloscopes and Multimeters, • Proficient soldering skills, • Proficiency in the English language with established written and verbal communication skills, • Ability to effectively communicate with all levels of staff and customers to influence, train and negotiate simple to complex topics, • Proficiency in Outlook, Microsoft Word, Excel and PowerPoint, • Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization, • Must be legally authorized to work in the US, • Knowledge of CE, UL, or other applicable regulatory guidelines or standards, • Basic understanding of an ERP system, • Regularly required to sit, walk, bend, stoop and stand in a manufacturing environment, • Will be required to lift, move, erect, install and assemble components of varying weight, height, length and width dimensions, • Day to day responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Will need to repeatedly use hands & fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on phone, and via email or other electronic devices on a continual and repetitive basis, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job function in a consistent state of alertness and safe manner, • Use written and oral communication skills, • Read and interpret data, information and documents, • Analyze and solve non-routine and complex problems, • Be creative, make judgements, use reasoning and make decisions, • Observe and interpret situations, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals. This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Discrimination of any type is not tolerated.

Job Description As iRocket advances toward frequent launches, we need a Test Engineer focused on hardware and launch infrastructure to validate subsystems, ground support equipment, integration, and launch-site readiness. The Role • Lead test programs for launch-pad hardware, ground support systems (GSE), avionics integration, and vehicle subsystem checkout., • Develop test plans, write procedures, execute dry-runs, and perform full system validation., • Troubleshoot hardware anomalies, manage data acquisition and reporting, work with cross-functional teams to close issues., • Support launch operations: pre-launch checkouts, integrated systems tests, post-launch data reviews, and lessons learned., • Bachelor’s degree in Engineering (Mechanical, Aerospace, Electrical, or related)., • 2+ years of test engineering experience in aerospace, launch, or hardware integration/test environment., • Experience with instrumentation, data acquisition systems, hardware integration, and test stand operations., • Comfortable working in a fast-paced environment with evolving requirements and launch cadence goals., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description On-Site, Hauppauge, NY Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. Job Description We are seeking a highly motivated and technically strong Application Engineer to play a strategic technical role expanding and supporting the adoption of Narda Safety Test Solutions (Narda STS) product lines throughout the United States. Narda STS, based in Germany, is a global leader in RF test & measurement, EMF safety, spectrum monitoring, interference hunting, and EMC/EMI analysis. This position focuses on expanding Narda’s presence across key U.S. markets, including military and defense, government agencies, aerospace, telecommunications, and industrial customers. In this role you will act as the technical authority for Narda products in the U.S., providing end-to-end support, from pre-sales consulting and product demonstrations to application development and post-sales assistance. A critical part of this role includes collaborative technical engagement and brainstorming with customers, including military program offices, system integrators, and field engineers, to help identify mission requirements, design technical use cases, and propose innovative solutions using Narda STS equipment. Key Responsibilities Customer & Applications Engineering • Serve as the primary technical expert for Narda STS equipment including EMF meters, spectrum analyzers, RF interference detectors, RF direction finders, and spectrum monitoring systems., • Conduct product demonstrations for commercial, government, and U.S. military customers (onsite, virtual, and at trade shows)., • Work with customers to design test methods, solve operational challenges, and optimize their use of Narda products., • Engage in brainstorming sessions with defense and enterprise clients to develop application concepts, system configurations, and mission-specific use cases., • Provide Tier 1/Tier 2 technical support and coordinate with engineering teams in Germany for advanced issues., • Support sales initiatives by identifying customer needs and recommending the proper Narda STS solution set., • Prepare customized proposals, technical quotes, and configuration packages., • Support federal and military acquisition processes including RFP/RFQ responses., • Build strong relationships with key accounts in the defense, aerospace, telecom, and industrial sectors., • Collect customer feedback to help guide new product features, development, and roadmap discussions with Narda STS headquarters., • Maintain expertise in RF measurement, EMF regulations, spectrum-monitoring practices, and military-relevant standards., • Frequent domestic travel for customer visits, demonstrations, training sessions, field support, and events. Required • Bachelor’s degree in Electrical Engineering, RF Engineering, Physics, Communications Engineering, or equivalent technical experience with RF systems., • 2+ years in RF test & measurement, spectrum analysis, EMC/EMI, or similar technical field., • Strong understanding of RF concepts (modulation, spectrum behavior, antennas, interference, propagation)., • Proven customer-facing experience in pre-sales engineering, applications support, system integration, or field engineering., • Ability to lead technical discussions and explain complex concepts clearly., • Experience supporting U.S. military customers, defense contractors, or federal agencies., • Strong technical curiosity and problem-solving abilities., • Comfortable brainstorming technical ideas and application scenarios with customers., • Self-starter with excellent organizational and communication skills. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job DescriptionGrass Valley is looking for an experienced Video/Broadcast Engineer to work embedded at one of our major global broadcast customers. The following job description is provided by our customer to describe the person they are looking for. This position will report on a day-to-day basis to the Engineering department of our customer, whose identity will be disclosed during the interview process. Primary Responsibilities This position is responsible for Research, Design, Documentation, Installation, Commissioning and Test of virtualized compressed IP-based video origination and distribution systems, along with related sub-systems for linear and streaming delivery via satellite and terrestrial fiber. • Responsible for end-to-end fulfillment of assigned projects and tasks, including installation, configuration and commissioning of video equipment and software applications., • Coordinates in-house and third-party resources to fulfill system integration tasks for documentation, fabrication and installation., • Experience in the design, build, and commissioning of technical systems for broadcast playout, distribution, and live streaming via IP., • Knowledge of baseband HD/SD video, compressed video/audio encoding, IP transport stream distribution, in-band and out-of-band metadata payloads, OTT streaming architecture, and IP networking principles including multicast., • Proven ability to test and qualify compressed video transport streams and compression technologies at the packet level, including MPEG-4 H.264, HEVC H.265, MPEG-2 and JPEG-2000., • Knowledge and experience in scripting, process automation, data acquisition, measurement and analysis tools, • Familiarity with video encryption and conditional access systems for content protection, broadcast and infrastructure monitoring and control systems, and Ethernet network topologies., • Familiarity with digital Ad Insertion systems, Targeted Advertisement signaling and video industry protocols such as SCTE-104 and SCTE-35., • Familiarity with industry developments in key technical areas of standardization and can articulate benefits/risks of various technology solutions., • Familiarity with Agile project management tools and techniques such as SCRUM and JIRA., • Demonstrates ability to manage assigned projects to tight timelines., • Demonstrates ability to perform technical analysis, exercise judgment, communicate with clarity and influence key technical decisions., • Possesses understanding of the modern video technology landscape including broadcast and streaming media., • Remains grounded in scientific method and objective analysis, representing a disciplined engineering approach at all times. 2PP3RSrd3V

Job Description Electrical Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This electrical engineering career opportunity is responsible for assisting in the design, wiring, testing and debugging complex, electro-mechanical, industrial x-ray integrated sources. Job Description: • Responsible for creating and maintaining Electrical Engineering Change Notices, • Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies used with x-ray applications, • Test, troubleshoot and debug electrical components and systems, • Analyze equipment to establish operating data and conduct experimental tests, • Works with technical personnel to ensure prototype models are assembled according to design specification, • Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards, • Generate, revise and finalize BOMs, • Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software) to generate and edit system electrical design documents, • Provide support to other departments in the creation of technical documentation, system manuals and customer facing documentation, • Create and maintain engineering reports, • Interact with other engineering disciplines, the sales and production teams on system designs and to help resolve customer problems and provide world class customer service, • Perform other duties as assigned by engineering team, • Follow all VJX and OSHA workplace safety requirements and policies, • Bachelor’s degree or higher in Electrical Engineering, • Internship or work experience in a manufacturing or environment, • Understanding of electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams, • Familiarity with soft switching techniques, schematics capture and PCB layout, • Prior soldering experience, • Proficiency in the English language with established written and verbal communication skills, • Excellent Microsoft Office Skills, • Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization, • Knowledge of CE, UL, or other applicable regulatory guidelines or standards, • X-ray component knowledge, • Regularly required to sit, walk, bend, stoop and stand within an industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone and via email and other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be requiredOn a regular basis, will be required to:, • Use written and oral communication skills, • Read and interpret data, information and documents, • Be creative, make judgements, use reasoning and make decisions, • Observe and interpret situations, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.

Job Description We are seeking a Quality Engineer to join our team! Responsibilities: • Create and improve automated systems and processes, • Perform first piece inspection, in-process inspection, final inspection, and incoming receiving inspection as required, • Help to Develop Quality Plans for specific jobs as required, • Utilize automated inspection equipment such as Hexagon Global CMM, Keyence Vision System, and Faro Arm to optimize inspection processes., • PC-DMIS programming to improve accuracy and efficiency in Automated quality checks., • Maintain a clean and safe work environment Qualifications: • Previous work experience in quality control., • Familiarity with CAD or other related software, • Strong attention to detail reading blueprints and checking parts to print., • Strong analytical and critical thinking skills, • Excellent written and verbal communication skills, • Knowledge of various inspection equipment such as calipers, micrometers, comparators, etc., • Document all technical procedures and user guides Company DescriptionWe are a family owned and operated contract precision machine shop. We have been part of the aerospace, defense, semiconductor and scientific instrumentation sectors for over 30 years and continue to grow.We are a family owned and operated contract precision machine shop. We have been part of the aerospace, defense, semiconductor and scientific instrumentation sectors for over 30 years and continue to grow.

Job Description Manufacturing Engineer Location: Bohemia, NY Job ID: #72316 Pay Range: $67-80 Duration: 6-12 months contract Job Description: • Define and solve technical problems in manufacturing, assembly, and testing environments., • Implement cost-saving and process improvement initiatives on assigned product lines., • Collaborate with design engineering teams to enhance manufacturability of products., • Develop efficient production workflows and determine optimal sequencing of operations., • Prepare cost estimates for proposed projects and analyze cost factors., • Support facility layouts for manufacturing processes and equipment as needed., • Solve manufacturing challenges of varying complexity., • Design tools, fixtures, and gauges using SolidWorks or similar to improve manufacturing processes and address safety concerns., • 3D printing of fixtures., • Create detailed assembly work instructions using Microsoft Power Point., • Program laser printers and develop operator instructions for laser printing processes., • Utilize Lifecycle-Program-Management (RLPM) for New Product Introduction projects (NPI) to develop build plans for new designs., • Develop and maintain production routers and bill of materials., • Collaborate with quality and suppliers to resolve quality and technical issues., • Conduct compliance reviews to ensure conformance with customer specifications and requirements., • Support the project pipeline process to select, prioritize and scope projects to increase First Pass Yield and throughput across the value stream, • Support the project pipeline process to select, prioritize and scope projects to business objectives, integrated with other continuous improvement activities and CORE initiatives., • Drive targeted manufacturing process optimization activities using MRL tools such as Process Control Plans and PFMEA Required qualifications: • Proficient in MS Office tools (Word, Excel, PowerPoint etc.), • Experience in fast paced and/or highly regulated aerospace or space manufacturing environments., • Experience supporting machine operations, including fixture/tool design, tool life management, routing/work instructions, and CNC programming familiarity., • Effective communication and interpersonal skills, with the ability to collaborate with cross-functional teams to achieve operational goals., • Strong analytical, organizational, and problem-solving skills with the ability to manage multiple priorities., • Effective technical communication, documentation, and collaboration skills., • Self-starter mindset with ability to work autonomously and lead complex manufacturing initiatives., • Knowledge of PFMEA, process validation, SPC, RCCA, control plans, and configuration control practices., • Familiarity with structured continuous improvement frameworks Preferred qualifications: • Experience working in an engineering, manufacturing, and/or production environment, • Experience with 3D modeling software (SolidWorks). Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law. Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at #ZR

Job DescriptionLyteLoop is the future of data storage - “Storage in Motion” Since late 2015, we have been perfecting our proprietary, patent pending photonic method of data storage which puts data in a constant state of perpetual motion. Achieved through the use of ultra-high bandwidth lasers, data now moves in an endless circulating loop, taking up less space and using less electricity. The companies revolutionary “storage in motion” technique will transform how data is stored while providing a myriad of unique and customizable advantages based on the desired companies’ application deployed. The company now makes it possible to harness the power of data while consuming less energy. This exceptional technology not only increases data storage performance and utilization, but also reduces the total cost of ownership. Our advance offers a clear competitive edge for those coping with the limitations of wasteful data storage systems. Using state of the art photonics technology the company patented IP will enable countless applications including huge power savings for Data Centers, less heat production, cybersecurity solutions and many additional applications. Company is located in Great Neck, NYCandidate must be able to work in the office every day.Salary up to $175,000 base, plus bonus Linux, C Embedded, Device Driver level We are seeking a Sr. Embedded Software Engineer/Sr. Firmware Engineer/Sr. Embedded Engineer to join our team, with the following job responsibilities: • Participate in the design of network storage elements and their interconnect system., • Evaluate and solve synchronization and real-time high-speed data transport and reliability issues., • Participate fully in team discussions with other subject matter experts and contribute to the overall Storage in Motion system design., • Work with programmable laboratory equipment and automate its functionality., • Must be a self-starter requiring minimum daily oversite and able to work towards the key milestones effectively.Must have:, • 5+ years embedded development on Linux based systems., • 5+ years of experience with C and Kernel C, • Working knowledge and up-to-date experience with all aspects of Linux networking and network interfaces including:, • Recent experience writing network packet transmission and processing applications., • Familiarity with low-level network device drivers, • knowledge of the Linux kernel and components, • experience with Linux User-level and kernel level development, • experience debugging Linux systems.Additional qualifications - one or more of the following:, • experience with Linux Kernel driver development, • experience with network drivers and block drivers, • experience with LabView and scientific equipment, • Experience with Python, MATLAB and LabVIEW, • Experience with Linux shell scripts, user space daemon development and development of command line utilities, • Experience with high speed 10 gigabit and 100 gigabit per second Ethernet adapters, • Experience with Storage Area Network technology, Fibre Channel, iSCSI etc.

Job Description Embedded Software Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This role is responsible for developing optimized software to support the prototypes of integrated x-ray sources and high voltage generators. Job Description • Design and create requirement specifications for the Microcontrollers to be used in High Voltage power supply designs, • Test units, integration of firmware and GUI (Graphical User Interface) changes, • Maintain Software Version Control (SVN) and release management systems, • Provide documentation for third party integration into the firmware and customer support to debug software issues, • Program Data Acquisition based GUI’s using serial communication (RS232) and Ethernet Communication (TCP/IP) protocols, • Work with cross-functional team to design and develop new products and improve existing designs, • Follow all VJX and OSHA workplace safety requirements and policies, • Bachelor’s Degree in Electrical and/or Computer Engineering, • Minimum of two (2) years of experience with NI, LabVIEW, Microsoft Visual Studio C++/VB/C#, Embedded C and RTOS, • 2-3 years of experience with Freescale products (MC56F8037 7 ARM) microcontrollers, • Demonstrated ability to write firmware for industrial control equipment, • Ability to work with Analog and Digital Circuits based PCB designs like Op Amps, ADC, DAC & multi-functional IC’s, • Knowledge of RS-232 and TCP/IP communication standards, • Proficient in Microsoft Office Suite, • Perform software development and version control adhering to SCRUM standard, • Proficiency in the English language with well-established written and verbal communication skills, • Must be a highly organized, self-motivated, team player, • Collaboration and creative thinking skills, • Knowledge of radiographic imaging systems for industrial and medical inspection, • Strong background in understanding x-ray tube design of high voltage generators to power up X-ray sources, • Regularly required to sit, walk, bend, stoop and stand within an office or industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and possibly operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone, via email and on other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • Use written and oral communication skills, • Read and interpret data, information and documents, • Be creative, make judgements, use reasoning and make decisions, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.

An Engineer within our Consumer Medical Products division (CMIT) will independently manage and execute timely completion of engineering safety investigations for a wide variety of cutting-edge medical products, laboratory equipment, consumer technology equipment, and other devices. Assists in deve

RESPONSIBILITIES: Operate forklifts and material handling equipment safely Load and unload trucks, verifying shipments against documentation Perform cycle counts and update inventory systems Organize and label warehouse storage areas Pick, pack, and stage materials for shipment Inspect equipment and

Property Services Corporation of Long Island is currently recruiting skilled professionals to join our growing team.Seeking ready to work all winter events Competitive Pay Career Advancement Mandatory experience Job Summary We are seeking Machine operators for winter snow removal all Commercial site

Primary interface with all stakeholders including internal and external customers, project engineering, executive management, subcontractors, and vendors. We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel. Coordinates efforts of man

RESPONSIBILITIES: Operate forklifts and material handling equipment safely Load and unload trucks, verifying shipments against documentation Perform cycle counts and update inventory systems Organize and label warehouse storage areas Pick, pack, and stage materials for shipment Inspect equipment and

Preferred Skills PMP Certification Primavera P6 Experience Familiar with Construction Work Scopes Familiar with Engineering Concepts Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal

Knowledge, Skills, and Abilities Knowledge of the use and operation of all equipment and testing equipment, gauges and tools normally associated with the troubleshooting and repair of hydraulic, gasoline, diesel, electric, and/or hybrid motorized equipment. Provides timely, quality maintenance for F

As an associate engineer, you will be responsible for your own cognizant components, systems and area but will be supported by a team including more experienced engineers and advisors. Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related

Assembler Location: Bohemia, NY Job ID: #72213 Pay Range: $18-21.Duration: 6 months Summary: Seeking motivated individuals who are looking to join a fast paced - growing organization to work in the production department doing: -Mechanical assembly of raw materials -Utilize different hand tools -QC I

CM engineers also regularly team with vendor engineers to develop improved and more efficient manufacturing processes with a focus on improved manufacturing margin, improved performance, reduced cost, and/or reduced span. Required Combination of Knowledge and Skill Bachelors degree from an accredite

Island Hospitality Management - - Responsibilities: Perform routine and preventative maintenance on resort facilities; Complete minor repairs to rental homes and facilities; Inspect irrigation systems, playgrounds, pool/spa, and recreational amenities; Maintain resort pool(s) and test chemical leve

Generac - - Responsibilities: Provide on-site troubleshooting, repair, and warranty/campaign service for Generac industrial products; Perform preventative maintenance and equipment modifications; Troubleshoot power generation and control systems; Work with minimal supervision in outdoor field condi

Nesco Resource - - Responsibilities: Lead the Facility Maintenance team and perform preventive maintenance on electromechanical systems.

Nesco Resource - - Responsibilities: Follow directions to produce high-quality mechanical and electrical assemblies; Maintain production pace in high-volume environment; Operate production equipment; Meet shift schedules; Adhere to safety and quality standards.

Waste Connections - - Responsibilities: Operate heavy equipment such as bulldozers, wheel loaders, motor grader, scraper, and compactors; Perform routine inspection and maintenance on equipment; Promote continuous improvement of workplace safety and environmental practices; Interact with customers

Crestline Hotels & Resorts - JobID: J5208faa3f5fb4b59ab016df471a3e52a-1 [Maintenance Mechanic] As a Maintenance Technician at Crestline Hotels & Resorts, you'll: Perform routine maintenance tasks to ensure the efficient operation of hotel facilities; Oversee and repair electrical, plumbing, and HVAC

Focus Workforce Management - - Responsibilities: Picking, packing, warehousing, and shipping product or merchandise to individual consumers or clients; Maintain excellent attendance; Follow all safety procedures; Communicate effectively; Maintain and assist keeping the facility clean.

Aerotek - - Responsibilities: Perform complex assembly operations under a microscope with little or no supervision.Conduct die bonding, wire bonding, header assembly, or operations of comparable difficulty.Utilize small hand tools and interpret complex assembly drawings and documents.Assist in achi