Equipment engineer jobs in Clifton, New JerseyCreate job alerts

Job Description Job Summary: The Engineer at Hyatt Place is responsible for maintaining the property’s overall functionality, including the building, equipment, and grounds. This role ensures that all hotel facilities and services operate smoothly and efficiently, providing guests with a safe and comfortable experience. Key Responsibilities: • Preventive Maintenance: Perform routine maintenance tasks on all mechanical equipment, HVAC systems, plumbing, electrical systems, and other hotel assets. Ensure the upkeep of guest rooms, public spaces, and back-of-house areas., • Repair Work: Respond promptly to guest or management requests for repair services. Troubleshoot and repair issues related to plumbing, electrical, HVAC, and other mechanical systems., • Safety and Compliance: Maintain the hotel's safety standards by conducting regular inspections and tests, ensuring that all equipment is in compliance with local, state, and federal regulations. Participate in fire drills and safety programs., • Energy Management: Monitor and control energy usage throughout the hotel, looking for ways to improve efficiency and reduce costs., • Documentation: Keep accurate records of maintenance work, inspections, and repairs. Report any unsafe conditions or equipment that requires replacement., • Vendor Coordination: Work with outside contractors and vendors for specialized repairs or maintenance tasks. Oversee their work to ensure it meets the hotel’s standards., • Team Collaboration: Work closely with the housekeeping and front desk teams to address guest concerns and maintain the overall appearance and functionality of the hotel., • Emergency Response: Be available to respond to emergencies, such as power outages, plumbing issues, or fire alarms. Act swiftly to mitigate any issues., • Education: High school diploma or equivalent required; technical or vocational training preferred., • Experience: Previous experience in hotel maintenance or engineering preferred. Experience with HVAC, plumbing, electrical, and mechanical systems is highly valued., • Skills: Strong problem-solving skills, attention to detail, and ability to work independently. Good communication skills and the ability to interact positively with guests and team members., • Certifications: Relevant certifications (e.g., HVAC, EPA) are preferred. The role may require working varied shifts, including nights, weekends, and holidays, depending on the hotel's needs. Requirements • A degree in a relevant field such as mechanical, electrical, or industrial engineering., • Proven experience in a manufacturing facility as a maintenance engineer or in a similar role., • Strong analytical and problem-solving skills., • Knowledge of electrical systems and the ability to use a multimeter, including high and low voltage systems., • Basic welding skills., • Excellent communication and customer service skills., • Ability to work independently and as part of a team., • Physical stamina to perform tasks in a fast-paced environment. Benefits: • Competitive salary, • Health and dental insurance, • Paid time off, • Employee discounts at Hyatt properties, • Opportunities for career advancementCompany DescriptionWe are in the business of caring for people so they can be their best. Our aim is to create long-term relationships built on being the most loved and preferred brand, employer and partner throughout the world.We are in the business of caring for people so they can be their best. Our aim is to create long-term relationships built on being the most loved and preferred brand, employer and partner throughout the world.

Job DescriptionQuality Control Microbiology Engineer(s) I, II, III Quality Control Microbiology Engineer I The “Quality Control (QC) Microbiology Engineer I” will support two local sites serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of QC Microbiology, responsibilities of the QC Microbiology Engineer I will include but are not limited to: Microbiological Testing: • Growth Promotion, • Microbial Identification, • Sterility Testing, • Gram Stain, • EndotoxinEquipment Monitoring:, • Ensure equipment is in proper working conditions, • Ensure all equipment is properly maintained/calibrated, • Shipping of test samples and equipment to contract laboratories for testing, • Complete all documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP).REQUIREMENTS, • Associates degree in a science or relevant field required, • Training in GxP/ GDP, Safety, • Minimum 0-2 years of experience or equivalent experience., • Microbiology testing or within the biopharmaceutical industry experience preferred., • Proficient with computer software; Microsoft Office, • Strong written and oral communication skills, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels, • Must be able to work during the weekend, holidays and as required by the company, • Duties, responsibilities, and activities may change at any time with or without notice.QC Microbiology Engineer II The Quality Control Microbiology Engineer II will support two local sites serving as a support role to clinical and commercial production. The QC Microbiology Engineer II will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the QC Microbiology Engineer II will include but are not limited to: Microbiological Testing:, • Growth Promotion, • Microbial Identification, • Sterility Testing, • Gram Stain, • EndotoxinEquipment Monitoring:, • Ensure equipment is in proper working conditions, • Ensure all equipment is properly maintained/calibrated, • Shipping of test samples and equipment to contract laboratories for testing, • Produce documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Writing/conducting investigations pertaining to microbiological testing, • Develop and train QC Microbiology Engineer I personnel on relevant business processesREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 2-4 years of experience with microbiological testing or within the biopharmaceutical industry., • Training in GxP/GDP, Safety, • Proficient with computer software such as; Microsoft Office, • MODA/LIMS, • Familiarity with ISO and EU standards, • Strong written and oral communication skills, • Technical writing skills, • Technical training ability, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Supervisory Responsibility, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels., • Employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays, and as required by the company, • Occasionally personal protective equipment may be required including lab coat, latex gloves, safety glasses and/or respirator., • Duties, responsibilities, and activities may change at any time with or without notice.QC Microbiology Engineer III The Quality Control Microbiology Engineer III will support two local sites. Serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer III will coordinate data for batch release, participate in project/client meetings, and author/revise microbiological testing procedures. Additionally, the incumbent will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the QC Microbiology Engineer III will include but are not limited to:, • Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Coordinates microbiological testing data for batch release, • Participation in project/client meetings and communications, providing scientific and technical expertise, • Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols, • Review of investigations and documentation of non-confirming events and environmental excursions., • Apply expertise of compliance requirements to maintain an inspection-ready state., • Participate and act as subject matter expert during audits/inspections, • Develop and train QC Microbiology Engineer II on relevant business processes, • Processing of purchase orders for outsourced testing and lab supplies, • Coordinates work orders, • Other duties as assignedREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry, • Minimum required training; GxP/GDP Training, Safety Training, • Proficient with computer software such as; Microsoft Office, MODA/LIMS; Microsoft Visio (preferred); Netsuite (preferred); Maximo Asset Management System (preferred), • Proficient knowledge of ISO and EU standards, • Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review., • Strong written and oral communication skills, • Strong technical writing skills, • Technical training experience, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Supervisory Responsibility; Direct reports, • While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels., • Must have the ability to work in a team-oriented environment and with clients., • Must be able to work during the weekend, holidays and as required by the company

Job Description POSITION SUMMARY: RVE is seeking a water / wastewater inspector with experience in the field of water and sewer construction. The ideal candidate should be familiar with gravity sanitary main, sanitary force main, pump station and wastewater treatment plant components and operation. The individual should also be versed in water main installation, water supply distribution systems and the components and operation of water treatment plants. The individual may also inspect storm sewer systems and roadway construction. The candidate should have a minimum of 5 years’ experience in this field. They will provide construction observation and project management services for municipal and county agencies. PRIMARY DUTIES: • Perform constructability and plan reviews prior to construction. Interact with the design engineer with input before the project goes out to bid., • Perform construction management services for projects that consist of water supply and sanitary distribution systems. Including work in water and wastewater plants. Ensure the job site is maintained in a safe, neat, and orderly fashion by the contractor., • Provide inspection of contractors work to ensure that the work is being performed as per plans and specifications and regulatory requirements. Communicate with the project manager daily about the progress on the project. Keep the client informed of the project’s progress., • Attending and running pre-construction & weekly progress meetings with the client and contractor and give input on issues that arise during construction. Follow through with RFIs to maintain the project runs as scheduled and communicate with Engineering Team., • Conduct on-site observations of the work in progress to assist Engineer in determining if the Work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Keep a diary or logbook of all observations and daily activities for ongoing work and provide Engineer with daily reports to include all labor trades and equipment supplied by Contractor., • Review applications for payment with Contractor and confer with Engineer on recommendations for progress payments., • Be knowledgeable of NJDEP procedures and requirements for management of a project., • Perform field testing of materials installed and start-up and acceptance of equipment., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Construction and building inspectors examine worksites, both alone and as part of a team. Some inspectors climb ladders or crawl in tight spaces. Most work full time during regular business hours. KNOWLEDGE, SKILLS, and ABILITIES: • Applicant must have demonstrated experience in water/wastewater inspections., • Good communication skills, with the ability to work with others and the public, • Self-motivated, organized, and focused, with good attention to detail EDUCATION/EXPERIENCE: • Minimum of 5 years of construction observation or construction experience directly related to one of the following disciplines: water supply and distribution systems, sanitary sewer collection and water / wastewater treatment systems, and roadway construction., • High School diploma or equivalent, • Must have computer literacy in Microsoft Office and Microsoft outlook. CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • NICET Certification a plus, • Traffic Control Coordinator, • NICET – Highway Construction, • ACI - Field Technician Certification, • New Jersey Society of Asphalt Technicians - Field Testing, • NJDOT - Traffic Control Coordinator, • NACE - CIP Level 1, • OSHA - 10/30, • NASSCO - Pipe Assessment, • Confined Space Training SUPERVISORY RESPONSIBILITY This position has no supervision responsibilities. The annual base salary range for this full-time position in the United States is $55,000 - $82,500. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins.

Job DescriptionQuality Control Microbiology Engineer III Lynkx Staffing LLC specializes in placing talented professionals in the Biotechnology, Pharmaceutical and Medical Device, IT and Human Resources disciplines in New Jersey. The Quality Control Microbiology Engineer III will support two local sites. Serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer III will coordinate data for batch release, participate in project/client meetings, and author/revise microbiological testing procedures. Additionally, the incumbent will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the • Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Coordinates microbiological testing data for batch release, • Participation in project/client meetings and communications, providing scientific and technical expertise, • Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols, • Review of investigations and documentation of non-confirming events and environmental excursions., • Apply expertise of compliance requirements to maintain an inspection-ready state., • Participate and act as subject matter expert during audits/inspections, • Develop and train QC Microbiology Engineer II on relevant business processes, • Processing of purchase orders for outsourced testing and lab supplies, • Coordinates work orders, • Other duties as assignedREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry, • Minimum required training; GxP/GDP Training, Safety Training, • Proficient with computer software such as; Microsoft Office, MODA/LIMS; Microsoft Visio (preferred); Netsuite (preferred); Maximo Asset Management System (preferred), • Proficient knowledge of ISO and EU standards, • Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review., • Strong written and oral communication skills, • Strong technical writing skills, • Technical training experienceMust be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilitiesSupervisory Responsibility; Direct reportsWhile performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens.Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels.Must have the ability to work in a team-oriented environment and with clients.Must be able to work during the weekend, holidays and as required by the company.Working EnvironmentWhile performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens.Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen.Other exposures may include gases (nitrogen), or corrosive chemicals (Clorox, potassium hydroxide), or exposure to liquid nitrogen. The noise level in the work environment is moderately noisy.Must have the ability to work in a team-oriented environment and with clientsMust be able to work during the weekend, holidays and as required by the companyMust be able to handle the standard/moderate noise of the manufacturing facility Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionDescription: As a Part-Time Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand Team Member of the Month, Quarter, and Year recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job Description Evening hours for on demand position available for Data Center Operations engineer. Technicians must be skilled in one or more of the following HANDS ON tasks: Storage/network equipment cabling, IT equipment rack and stack, Trouble shoot equipment, cabling and power distribution to equipment, DIMM Replacement, Drive Replacement, Power supply, Fan, Modules, system configuration, surveys and audits, circuit connections, etc. Must be able to communicate clearly and have understanding of how to execute scope of work efficiently. Must have drivers license and reliable vehicle or reliable means to travel to site. Experience 4- 10 years is required. Ideally the candidate will have experience in DC setting, execute patch connections, providing remote hands, communicating with remote engineers during trouble shooting efforts, troubleshooting cabling to servers, switches, firewalls, routers, etc. Must be able lift server equipment for racking. Must have the ability to communicate results of trouble shooting efforts. Must have experience extending Fiber optic circuits and Ethernet cable circuits. Must be reliable and willing to work mostly evenings( 2nd shift) and most weekends. Must be able to work independently to execute a work ticket in DC. Job description: DC technician on demand on second shift 1-5 Days/nights per week. There is some flexibility in this position for the right candidate. This is a good second income. Hours are from about 6-10pm most nights, with some flexibility. Inquire to discuss further if seriously interested. Pay rate based on experience level serious inquires only *NOTE: this position is for experienced DC OPs/ cabling tech... not Systems or Applications related. Required: 1. Please email the ad with all your contact information and RESUME., 2. Drivers license and working vehicle., 3. Experience in one or more of the aforementioned fields., 4. Positive attitude. 5.Must be reliable and punctual 6.Must be able to work alone 6. Must pay close attention to detail, 7. Must be able to clearly communicate with remote engineers

Job Description Senior Electrical Engineer – AEC Industry Location: Hybrid | Midland Park, NJ or Goshen, NY Compensation: $115,000 – $160,000/year (commensurate with experience) Job Type: Full-time | W-2 | With Comprehensive Benefits Hybrid Schedule: 3 days onsite / 2 days remote (after 90-day in-office onboarding) Join LAN Associates: Award-Winning AEC Firm with 60 Years of Excellence! LAN Associates, Engineering, Planning, Architecture, Surveying, Inc. (LAN) is a top-rated, mid-sized, multi-disciplinary architecture and engineering (AEC) firm with a 60-year legacy in delivering high-impact building design solutions across commercial, educational, healthcare, hospitality, residential, and institutional markets. We are actively seeking a Senior Electrical Engineer to join our growing electrical engineering team. This role offers the opportunity to work on diverse, complex building projects while leading junior team members and collaborating with a multi-disciplinary project team. Key Responsibilities – Senior Electrical Engineer: * Lead, mentor, and develop junior electrical engineering staff * Plan, design, and coordinate electrical systems for various building projects in compliance with NEC, NFPA, IEEE, and other codes * Perform and review electrical calculations, including load calculations, voltage drop, short-circuit analysis, and equipment sizing * Prepare technical reports, specifications, and permit applications * Conduct quality assurance reviews of electrical design work and ensure accuracy of construction documents * Collaborate with architects, engineers, consultants, and clients throughout the project lifecycle * Participate in project meetings, including design reviews and construction coordination * Support construction administration including RFI responses, submittal reviews, and site visits * Contribute to proposal development and business development initiatives * Ensure project budgets, timelines, and scope are maintained Minimum Qualifications: * 7+ years of electrical engineering experience in the Architecture, Engineering, and Construction (AEC) industry * Bachelor’s degree in Electrical Engineering * PE license (preferred) or EIT with a path toward licensure (NY and NJ preferred) * Strong proficiency in AutoCAD; Revit experience a plus * In-depth knowledge of NEC, NFPA, IEEE, ANSI standards, and applicable building codes * Proven ability to read and interpret construction documents * Demonstrated experience in client-facing roles * Previous leadership or mentorship of junior engineers * Proficiency in Microsoft Excel and Word; load calculation software experience preferred * Valid driver’s license; willingness to travel locally (Tri-State area) up to 20% Preferred Qualifications: * 10+ years of experience in building electrical system design * Experience with electrical power analysis software (e.g., SKM, ETAP) * Revit proficiency for MEP systems coordination * Prior experience at a full-service architecture and engineering firm Why LAN Associates? LAN offers one of the best benefits packages in the AEC industry, designed to support your career growth and personal well-being: * Competitive salary + company performance bonuses * Employee-owned company | Stock options after 6 months * 100% company-paid Health, Dental & Vision Insurance (employee + family) * 401(k) with 3-5% company profit-sharing contribution * 15+ PTO days annually (increases with tenure) * 9 Paid Holidays + 1 Floating Holiday * Employer-paid Life Insurance, Disability, EAP & Wellness Programs * Continuing Education & Professional Development reimbursement * Mentorship, resource groups & internal leadership development * Pet insurance, voluntary benefits, and more! About LAN Associates: With over 130 professionals across offices in New Jersey, New York, and Pennsylvania, LAN delivers over $250 million in construction value annually. Our portfolio includes award-winning projects like The Vista at Christian Health, The Empty Sky 9/11 Memorial, and The Four Seasons Hotel expansions. We serve diverse markets including: * K-12 and Higher Education * Healthcare & Senior Living * Commercial & Mixed-Use * Hospitality * Government & Municipal Facilities * Faith-based & Nonprofits Our Core Values: Loyalty | Honesty & Integrity | Responsiveness | Innovation | Company Pride Alternate titles: Electrical Project Engineer | Electrical Design Engineer | Lead Electrical Engineer | Principal Electrical Engineer | MEP Engineer We are proud to be an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Product Sales Engineer Engineered Equipment | Capital Machinery | Processing & Water Treatment Industries Drive Innovation. Empower Solutions. Engineer Growth. We are seeking a Product Sales Engineer to join our high-performance team supporting the sales and application of custom and benchmark electro-mechanical equipment across industries such as food & beverage, packaging, and water/wastewater treatment. This role bridges the gap between engineering and sales—combining technical expertise, client engagement, and commercial strategy to support field sales teams, drive customer satisfaction, and grow market share. Who You Are: You’re a technically savvy professional with a background in equipment manufacturing, Packaging, Food & Bev, process systems, or water treatment solutions—ready to leverage your knowledge into consultative sales support. You enjoy collaborating across departments, mentoring others, and solving problems creatively. Preferred Backgrounds: • Electro-mechanical systems, • Capital equipment (packaging, processing, filtration, or automation), • Water/Wastewater systems, • Process equipment for industrial or municipal markets Degree preferred: Mechanical, Electrical, Chemical, or Systems Engineering (Associate or Bachelor’s level), or equivalent technical experience. Key Responsibilities Technical Sales Support • Partner with Field Sales Representatives to analyze customer requirements, recommend solutions, and configure systems that align with performance and budget goals., • Serve as the subject matter expert for specialized equipment and develop competitive product positioning., • Assist in proposal development, quote generation, and pricing strategy for complex systems., • Mentor and train Field Sales Representatives in product capabilities, sales strategies, and competitive differentiators., • Analyze industry trends and competitive data to help identify market opportunities and enhance sales strategy., • Maintain accurate, professional documentation of sales activities, client communications, and engineering support., • Provide feedback to product development and marketing teams to drive continuous improvement. Qualifications • 3–5+ years of experience in technical sales, application engineering, or product management within a capital equipment or electro-mechanical manufacturing environment., • Strong understanding of custom machinery or engineered system design., • Familiarity with CAD platforms, CRM systems (e.g., Salesforce or HubSpot), and project tracking tools., • Demonstrated success supporting or leading complex sales engagements., • Excellent communication, problem-solving, and customer relationship-building skills., • Willingness to travel (up to 5%) and perform light hands-on tasks as needed for product demos or events. What We Offer • A collaborative culture where engineering and innovation are celebrated., • Competitive base compensation + performance bonuses., • Ongoing training and development programs to support your professional growth., • Mentorship opportunities and a path to advance into senior technical, sales, or operational leadership roles., • A team-first environment where your ideas and expertise are valued. Be Part of Something Bigger If you thrive in a solution-driven environment and are ready to contribute your technical talent to a company that builds world-class systems for critical industries—this is the opportunity for you. We are an equal opportunity employer and welcome applicants from all backgrounds and experiences.

Job DescriptionPOSITION SUMMARY: The Water/ Wastewater Project Engineer/ Manager is a professional with a minimum of 8 years of experience. This individual will plan, design and perform analysis on water/wastewater engineering projects such as pipelines; pumping stations; and treatment facilities. Engineer shall be self-motivated, capable of acting as firm’s representative to clients, and providing support to branch offices in NJ/PA/DE/MD area. PRIMARY DUTIES: • Hydraulic calculations and layout of structures., • Producing correspondence/reports/biddable documents for arsenic, radium and iron removal water plants; wells; water storage tanks; pumping stations; piping systems; and wastewater treatment plant improvements., • Engineering support to our inspection department., • Act as firm’s representative to Townships; utility authorities; and private utility companies., • Draft concise proposals for new work., • Capable of addressing multiple simultaneous assignments, on-time and within budgets., • "Proactive"' identification of problems/issues coupled with detailed analysis and effective resolution., • Producing all deliverables associated with this position., • Capable of addressing multiple simultaneous assignments, on-time and within budgets., • Regulatory permitting., • Knowledge of water/wastewater equipment and their purpose., • Ability to read and comprehend complicated construction, drawings, schematics, specifications, codes, and handbooks., • Ability to clarify and concisely express thoughts verbally and in written correspondence/reports/specifications., • Provides effort and takes pride in all work assignments produced., • Not afraid to ask for guidance/assistance in order to expedite the date of assignment deliverables., • Ability to simultaneously work on group and individual assignments., • Capable of providing directions and mentoring less experienced staff., • Capable of managing project meeting attended by either staff, clients or contractor’s personnel., • Familiarity with NJDEP regulations and compliance requirements., • Must have effective communication, management and writing skills., • Must be skilled in the use of Word/Excel products., • Bachelors of Science Degree in Civil, Mechanical, Structural, or Chemical Engineering curriculum from an accredited four-year college or university. CERTIFICATIONS/LICENSES REQUIRED • NJPE License Required or Ability to Acquire NJPE Reciprocity Essential, • Professional Licensure Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. Occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Senior Project Engineer – Performs & plans commissioning of electrical systems. Must be a self-motivated & energetic professional. Must have understanding of building electrical systems design & construction. Must have experience with commissioning process of electrical systems ranging in size, rating and complexity. The ideal candidate shall possess theoretical and practical knowledge in the commissioning, testing and troubleshooting of electrical systems and related controls. Candidate will be responsible for reviewing project information; coordinating and executing daily field activities; maintaining project documentation; assisting the Project Manager with schedule and planning of resources; and providing guidance to Project Engineers. May perform as team lead on small to medium sized projects. Will be expected to assess and test at a high technical level. This role requires the candidate to have technical competency, organizational skills, good communication skills, and to work well in a team environment where leadership is necessary. Primary Duties/Responsibilities: • Commission electrical distribution equipment and related controls, primarily in data center environments, including high voltage and medium voltage systems., • Review system designs for compliance with client facility goals., • Prepare plans and procedures for execution of the commissioning process., • Conduct commissioning activities from the design phase through the occupation phase, in accordance with client requirements and industry commissioning process best practices., • Attend factory testing of equipment and document procedures and results., • Conduct functional testing of equipment., • Perform analysis of test results using instrumentation and prepare reports., • Understand critical power quality requirements and test procedures., • Perform thermographic surveys and analyze results., • Fully document all field procedures including results, issues and observations either via company provided templates or online applications., • Report on system performance and make technical recommendations on issues., • Work with the Project Manager and project teams to coordinate and execute field activities., • Prepare and provide input on commissioning project documentation and schedules., • Draft comprehensive test procedures for a variety of equipment and systems., • Attend relevant project coordination and schedule meetings as necessary., • May be required to lead commissioning meetings or speak on technical topics., • Assist with submitting and maintaining daily commissioning reports., • Train and guide both Associate Project Engineers and Project Engineers on roles & responsibilities., • Respond to project team and client inquiries in a professional and timely manner., • Comply with company, client, and project safety requirements., • Be knowledgeable with building equipment, including, but not limited to:, • Generator, • Generator Paralleling Switchgear, • High / Medium / Low Voltage Transformer (XFMR), • Uninterruptible Power Supply (UPS Systems), • Battery Systems, • High / Medium / Low Voltage Switchgear (SWGR), • Low Voltage Main Switchboards (MSB), • PLC Control, • Automatic and Semi-Automatic Switching Controls, • Electrical Power Monitoring System (EPMS), • Automatic Transfer Switch (ATS), • Static Transfer Switch (STS), • Power Distribution Unit (PDU), • Busways, • Remote Power Panel (RPP), • Grounding Systems, • Hybrid Work Environment., • Travel nationwide 50% - 75% if not assigned locally; may have periods of higher travel expectation.Qualifications Education/Experience/Background: • Minimum of 7 or more years of experience in commissioning with mission critical project experience, or relevant and applicable industry experience., • Organized, detail-oriented, analytical, proactive, problem solver., • Good communication and relationship skills., • Effective written and verbal communication skills., • Ability to manage multiple tasks simultaneously, work with limited supervision and manage junior engineers on day-to-day tasks., • Knowledge & experience with ASHRAE or BCxA commissioning guidelines preferred., • Knowledge & experience with InterNational Electrical Testing Association (NETA) test specifications., • Distributed control system experience a plus., • Good understanding of building management systems (BMS) and/or electrical power monitoring system (EPMS)., • Deep understanding and application of test instrumentation., • Ability to walk up to 5 miles per day., • Carry up to 50 lbs., • Ability to wear required PPE daily. Additional Information Pay Range: $120000 to $140000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Senior Electrical Engineer – AEC Industry Location: Hybrid | Midland Park, NJ or Goshen, NY Compensation: $115,000 – $160,000/year (commensurate with experience) Job Type: Full-time | W-2 | With Comprehensive Benefits Hybrid Schedule: 3 days onsite / 2 days remote (after 90-day in-office onboarding) Join LAN Associates: Award-Winning AEC Firm with 60 Years of Excellence! LAN Associates, Engineering, Planning, Architecture, Surveying, Inc. (LAN) is a top-rated, mid-sized, multi-disciplinary architecture and engineering (AEC) firm with a 60-year legacy in delivering high-impact building design solutions across commercial, educational, healthcare, hospitality, residential, and institutional markets. We are actively seeking a Senior Electrical Engineer to join our growing electrical engineering team. This role offers the opportunity to work on diverse, complex building projects while leading junior team members and collaborating with a multi-disciplinary project team. Key Responsibilities – Senior Electrical Engineer: * Lead, mentor, and develop junior electrical engineering staff * Plan, design, and coordinate electrical systems for various building projects in compliance with NEC, NFPA, IEEE, and other codes * Perform and review electrical calculations, including load calculations, voltage drop, short-circuit analysis, and equipment sizing * Prepare technical reports, specifications, and permit applications * Conduct quality assurance reviews of electrical design work and ensure accuracy of construction documents * Collaborate with architects, engineers, consultants, and clients throughout the project lifecycle * Participate in project meetings, including design reviews and construction coordination * Support construction administration including RFI responses, submittal reviews, and site visits * Contribute to proposal development and business development initiatives * Ensure project budgets, timelines, and scope are maintained Minimum Qualifications: * 7+ years of electrical engineering experience in the Architecture, Engineering, and Construction (AEC) industry * Bachelor’s degree in Electrical Engineering * PE license (preferred) or EIT with a path toward licensure (NY and NJ preferred) * Strong proficiency in AutoCAD; Revit experience a plus * In-depth knowledge of NEC, NFPA, IEEE, ANSI standards, and applicable building codes * Proven ability to read and interpret construction documents * Demonstrated experience in client-facing roles * Previous leadership or mentorship of junior engineers * Proficiency in Microsoft Excel and Word; load calculation software experience preferred * Valid driver’s license; willingness to travel locally (Tri-State area) up to 20% Preferred Qualifications: * 10+ years of experience in building electrical system design * Experience with electrical power analysis software (e.g., SKM, ETAP) * Revit proficiency for MEP systems coordination * Prior experience at a full-service architecture and engineering firm Why LAN Associates? LAN offers one of the best benefits packages in the AEC industry, designed to support your career growth and personal well-being: * Competitive salary + company performance bonuses * Employee-owned company | Stock options after 6 months * 100% company-paid Health, Dental & Vision Insurance (employee + family) * 401(k) with 3-5% company profit-sharing contribution * 15+ PTO days annually (increases with tenure) * 9 Paid Holidays + 1 Floating Holiday * Employer-paid Life Insurance, Disability, EAP & Wellness Programs * Continuing Education & Professional Development reimbursement * Mentorship, resource groups & internal leadership development * Pet insurance, voluntary benefits, and more! About LAN Associates: With over 130 professionals across offices in New Jersey, New York, and Pennsylvania, LAN delivers over $250 million in construction value annually. Our portfolio includes award-winning projects like The Vista at Christian Health, The Empty Sky 9/11 Memorial, and The Four Seasons Hotel expansions. We serve diverse markets including: * K-12 and Higher Education * Healthcare & Senior Living * Commercial & Mixed-Use * Hospitality * Government & Municipal Facilities * Faith-based & Nonprofits Our Core Values: Loyalty | Honesty & Integrity | Responsiveness | Innovation | Company Pride Alternate titles: Electrical Project Engineer | Electrical Design Engineer | Lead Electrical Engineer | Principal Electrical Engineer | MEP Engineer We are proud to be an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionCompany Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description STS Aerospace is looking for a Manufacturing Engineer that is accountable for improving and maintaining first pass yield for specified parts and/or processes. This is accomplished by driving continuous improvement initiatives, process development/modification, documentation of standards/best practices, and equipment onboarding/troubleshooting. Candidate shall also support cross functional initiatives with Production, Quality and Purchasing departments to meet company goals and product quality standards. Scope of Responsibilities: • Troubleshooting of quality issues throughout the production process: welding, brazing, nickel plating, cleaning, and borescope inspection. Additional processes: bending., • Use continuous improvement and lean techniques to increase production efficiency, eliminate waste, and drive cost savings opportunities., • Support production staff with specification/technical knowledge, inspection techniques, weld/braze consumables management and day-to-day trouble shooting efforts., • Documentation and standardization of processes via work instructions and operating instructions to increase efficiency, facilitate cross-training and enable proper equipment usage., • Equipment and tooling on-boarding into production process to support new product, process efficiency, ergonomics or safety. Basic troubleshooting, light-level repair and/or export of orbital weld machines, orbital weld heads, steam cleaning machines, tungsten grinders etc., • Effective communication with production employees, management staff and cross-functional team to ensure the alignment of efforts to meet company goals., • Conduct classes and trainings to support continuous improvements efforts and product quality i.e. Visual Inspection and Back-to-Basics courses., • Manage operator qualifications to ensure production staff is qualified to perform given tasks, • Ability to work in a fast-paced, deadline-oriented team environment, • Ability to read, interpret, translate engineering drawings and customer specifications to drive compliance, • Excellent team player with a great attitude. Accountabilities • Support of Team Goals, Represent company as process expert, requisition tooling and equipment for processes., • Performance Measurement & Performance Evaluation., • Meet team quarterly objectives. Adherence to goals and behaviors associate with achieving them, • First pass yield, • Process compliance (welding, bending, brazing, chemical), • Project completion/execution, • Aging (units over lead-time)Qualifications, • Proven working experience as a manufacturing engineer or in a related field., • Experience in blueprint reading and spec interpretation., • Must be comfortable in a manufacturing environment often fast-paced and loud., • Must be able to stand, lift, walk, bend, and reach during their shift., • Must be comfortable wearing safety glasses., • Work well within a team., • Creative and innovative thinking skills., • Problem-solving skills. Additional Information Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description Senior Electrical Engineer – AEC Industry Location: Hybrid | Midland Park, NJ or Goshen, NY Compensation: $115,000 – $160,000/year (commensurate with experience) Job Type: Full-time | W-2 | With Comprehensive Benefits Hybrid Schedule: 3 days onsite / 2 days remote (after 90-day in-office onboarding) Join LAN Associates: Award-Winning AEC Firm with 60 Years of Excellence! LAN Associates, Engineering, Planning, Architecture, Surveying, Inc. (LAN) is a top-rated, mid-sized, multi-disciplinary architecture and engineering (AEC) firm with a 60-year legacy in delivering high-impact building design solutions across commercial, educational, healthcare, hospitality, residential, and institutional markets. We are actively seeking a Senior Electrical Engineer to join our growing electrical engineering team. This role offers the opportunity to work on diverse, complex building projects while leading junior team members and collaborating with a multi-disciplinary project team. Key Responsibilities – Senior Electrical Engineer: * Lead, mentor, and develop junior electrical engineering staff * Plan, design, and coordinate electrical systems for various building projects in compliance with NEC, NFPA, IEEE, and other codes * Perform and review electrical calculations, including load calculations, voltage drop, short-circuit analysis, and equipment sizing * Prepare technical reports, specifications, and permit applications * Conduct quality assurance reviews of electrical design work and ensure accuracy of construction documents * Collaborate with architects, engineers, consultants, and clients throughout the project lifecycle * Participate in project meetings, including design reviews and construction coordination * Support construction administration including RFI responses, submittal reviews, and site visits * Contribute to proposal development and business development initiatives * Ensure project budgets, timelines, and scope are maintained Minimum Qualifications: * 7+ years of electrical engineering experience in the Architecture, Engineering, and Construction (AEC) industry * Bachelor’s degree in Electrical Engineering * PE license (preferred) or EIT with a path toward licensure (NY and NJ preferred) * Strong proficiency in AutoCAD; Revit experience a plus * In-depth knowledge of NEC, NFPA, IEEE, ANSI standards, and applicable building codes * Proven ability to read and interpret construction documents * Demonstrated experience in client-facing roles * Previous leadership or mentorship of junior engineers * Proficiency in Microsoft Excel and Word; load calculation software experience preferred * Valid driver’s license; willingness to travel locally (Tri-State area) up to 20% Preferred Qualifications: * 10+ years of experience in building electrical system design * Experience with electrical power analysis software (e.g., SKM, ETAP) * Revit proficiency for MEP systems coordination * Prior experience at a full-service architecture and engineering firm Why LAN Associates? LAN offers one of the best benefits packages in the AEC industry, designed to support your career growth and personal well-being: * Competitive salary + company performance bonuses * Employee-owned company | Stock options after 6 months * 100% company-paid Health, Dental & Vision Insurance (employee + family) * 401(k) with 3-5% company profit-sharing contribution * 15+ PTO days annually (increases with tenure) * 9 Paid Holidays + 1 Floating Holiday * Employer-paid Life Insurance, Disability, EAP & Wellness Programs * Continuing Education & Professional Development reimbursement * Mentorship, resource groups & internal leadership development * Pet insurance, voluntary benefits, and more! About LAN Associates: With over 130 professionals across offices in New Jersey, New York, and Pennsylvania, LAN delivers over $250 million in construction value annually. Our portfolio includes award-winning projects like The Vista at Christian Health, The Empty Sky 9/11 Memorial, and The Four Seasons Hotel expansions. We serve diverse markets including: * K-12 and Higher Education * Healthcare & Senior Living * Commercial & Mixed-Use * Hospitality * Government & Municipal Facilities * Faith-based & Nonprofits Our Core Values: Loyalty | Honesty & Integrity | Responsiveness | Innovation | Company Pride Alternate titles: Electrical Project Engineer | Electrical Design Engineer | Lead Electrical Engineer | Principal Electrical Engineer | MEP Engineer We are proud to be an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Job Overview: A large Manufacturing plant in NJ is looking for a Senior Industrial/Process Engineer to lead efforts in optimizing production systems, improving workflows, and driving technical process innovations across our high-volume manufacturing plant. This role combines hands-on engineering expertise with strategic leadership, ensuring that operations run efficiently, safely, and at scale. The ideal candidate should bring strong technical capability, design and optimize facility layouts to maximize space utilization, streamline material flow, and support scalable production, and the ability to guide teams through continuous improvement initiatives. Key Responsibilities:  Analyze production schedules, workflows, and system specifications to maximize throughput, efficiency, and quality.  Design and optimize facility layouts, focusing on space utilization, equipment placement, and material flows.  Drive process upgrades, automation, and system enhancements.  Define and enforce technical and production standards with cross-functional teams.  Implement control systems that reduce downtime, cost, and variability.  Prepare cost models, equipment specifications, and capital expenditure justifications.  Act as a technical leader for the Continuous Improvement (CI) team, mentoring engineers and operators.  Train staff on new technologies, standards, and best practices.  Promote a data-driven, problem-solving culture across the plant. Qualifications:  Bachelor’s degree in industrial/Process Engineering or related field (required).  Significant experience in manufacturing process design, optimization, and improvement.  Advanced knowledge of production machinery, automation, and system layouts.  Strong technical skills, including, MS Office, and process modeling tools (with AutoCAD optional).  Proven ability to lead technical projects and elevate team capability.  Excellent analytical, communication, and leadership skills. Company DescriptionRecruiting CompanyRecruiting Company

Job Description Providing Engineering and Manufacturing solutions since 1955, Triangle specializes in the precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement. Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a difference in people's lives. SUMMARY Responsible for the successful outcome of the development and implementation of the complete part-specific process by effectively translating the customer’s requirements to the company and suppliers, and adhering to the Quality Management System, all applicable regulations, and Lean Manufacturing principles. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Manages all aspects of the part-specific process, including resource planning, project timelines, and establishing priorities to ensure customer requirements and quoted standards are met., • Evaluates and improves process documentation protocols for engineering and manufacturing, as well as creates, updates, and maintains the item masters, bills of material, and routers, etc., • Reviews requests for quotes (RFQs) and helps determine the feasibility of projects, estimates labor and related costs, and prepares formal quotes for submission to customers., • Teams with customers to review designs for manufacturability and to understand the functionality of the part and its features, adds specifications as needed, and verifies GD&T was properly applied., • Clarifies, confirms, and correlates acceptance criteria with customers, company, and suppliers., • Develops manufacturing methods for new and existing projects by reviewing customer specifications and quality agreements, adhering to all applicable requirements, and effectively translating them into instructions., • Performs initial sourcing and qualifies suppliers from a technical perspective, as well as effectively communicates the customer requirements through training and auditing of the supplier’s performance on a regular basis., • Ensures product quality through the development and implementation of complete quality plans including CMM programming, gage design and procurement, and inspection plans., • Coordinates and/or performs validation activities (IQ, OQ, PQ) designed to qualify the equipment and the process as required., • Teams with the CNC Engineer to design work-holding devices and tooling as needed to ensure the desired outcome., • Investigates root cause of customer and/or supplier rejections and internal quality failures, dispositions non-conforming parts, recommends and implements effective corrective action as required, and provides accurate and timely responses to customers., • Determines the impact of ECNs on bills of material, routing, and spares, and coordinates any change., • Leads the post-production review and evaluation of the part-specific process, including equipment performance and product quality, recommends improvements, and coordinates their implementation., • Provides direction and on-the-job training to engineering and production associates regarding manufacturing methods and practices, as well as recommends, develops, and implements complete training programs, including materials and assessments., • Champions lean manufacturing principles by encouraging lean thinking in all aspects of development and production, as well as conducting and/or coordinating training and implementation with managers and associates., • Understands and complies with company policies, safety guidelines, quality system procedures, and housekeeping standards.Additional Duties and Responsibilities:, • Program, troubleshoot, and manage the Universal Robots arms., • Oversee the fixture designs, programs, prove outs, operation, and maintenance of the automated blasters., • Identify opportunities for automation within the organization and develop solutions to enhance productivity., • Collaborate with various departments to implement automation projects., • Ensure all automated systems comply with safety and quality standards., • Provide training and support to staff on the use of automated equipment. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Bachelor’s degree from a four-year college or Manufacturing Engineer Certification and 8-10 years related experience and/or training; or equivalent combination of education and experience. Required Skills, Knowledge, and Abilities: • Ability to read, write, and speak English. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or government regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, customers, and the general public., • Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Experience with computer applications, including word-processing, spreadsheets, graphs, databases, CAD, and presentations., • Experience with process capability, Gage R&R, and statistical techniques., • Experience in using basic and advanced measuring tools and equipment., • Applied knowledge of Geometric Dimensioning & Tolerancing (GD&T)., • Capable of working independently as well as collaborating and coordinating efforts with colleagues., • Ability to establish priorities and manage multiple activities and requirements in a changing, fast-paced environment., • Experience with manufacturing materials, manufacturing processes, and secondary processes., • Project management skills.Desired Skills, Knowledge, and Abilities:, • Advanced metrology (CMM programming, vision system, etc.)., • Lean/Six Sigma. Triangle is proud to be an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Powered by JazzHR QvoSIKq1TI

Job Description Department: Quality Location: PTI Tech, Clifton NJ Reports To: Director of Quality Mission To uphold and advance the highest standards of quality across all stages of manufacturing—ensuring compliance with AS9100 and customer-specific requirements through robust documentation, risk management, and process validation. This role exists to proactively prevent quality issues, support internal and customer-facing investigations, and strengthen PTI’s reputation as a trusted partner for mission-critical components. Competencies – What This Person Must Be Standards-Driven: Understands and applies AS9100, ISO 9001, MIL-STD-1916 and customer-specific standards; ensures audits, validations, and ongoing operations meet all requirements. Root Cause Problem Solver: Leads investigations using 8D, 5 Whys, and Ishikawa methods to ensure sustainable corrective actions. Process Control Advocate: Uses SPC, PFMEA, control plans, and capability studies to ensure consistent, capable production. Metrics-Driven: Uses data analysis to monitor trends, reduce scrap, and eliminate recurrence of quality issues. Customer-Focused: Communicates clearly with aerospace, defense, and other high-stakes clients; drives issues to closure and delivers timely updates. Cross-Functional Collaborator: Partners with Engineering, Manufacturing, and Production teams to align on requirements, validate processes, and resolve issues quickly. Detail-Oriented: Manages documentation and compliance requirements with accuracy including FAIRs, PPAPs, CAPA records, SOPs, and quality alerts with full traceability. Self-Directed and Proactive: Takes initiative to identify and resolve quality risks without being prompted and with minimal supervision; follows through on actions with rigor and accountability. Key Responsibilities • Drive quality improvements through Gage R&R studies, Statistical Process Control (SPC), Six Sigma, and Lean Manufacturing tools., • Lead investigations into internal and external quality issues; document findings and ensure timely resolution., • Perform root cause analysis using structured problem-solving methods (8D, 5 Whys) and verify the effectiveness of corrective and preventive actions (CAPA)., • Coordinate timely responses to Supplier Corrective Action Requests (SCAR), Non-Conformance Reports (NCR), customer complaints, and quality-related queries., • Prepare and maintain First Article Inspection Reports (AS9102), Production Part Approval Process (PPAP-AS9145) documentation, and validation (IQ/OQ/PQ)., • Lead risk assessments (PFMEA) and develop control plans to mitigate quality risks., • Track and analyze defects and scrap data to identify trends and prioritize corrective actions., • Collaborate with manufacturing and engineering to improve processes and define inspection criteria., • Own inspection processes, including CMM (Zeiss – Calypso), OGP, and Keyence programming, as well as inspection fixture design (SolidWorks preferred)., • Oversee QC personnel training in partnership with manufacturing engineering to establish visual standards and develop work instructions., • Maintain SOPs, work instructions, inspection procedures, and training logs in compliance with AS9100., • ≥ 98% Quality Shipments, • ≥ 90% Gage R&R Pass Rate, • ≥ 1.33 Cpk for Stable Processes, • ≤ 3% Internal Scrap Rate on assigned processes, • ≥ 95% CAPA Effectiveness, • ≥ 95% On-Time Submission of FAIRs, PPAPs, SCAR’s, and CAPA’s, • Bachelor’s degree in Mechanical, Manufacturing, or a related Engineering field, • 3–5+ years of quality engineering experience in injection molding or precision manufacturing, • Working knowledge of AS9100, ISO 9001, and MIL-STD-1916, • Experience with FAIR, PPAP, SPC, PFMEA, control plans, and CAD (SolidWorks preferred), • Proficiency in statistical tools (Minitab, JMP, Excel) and QMS/ERP systems, • ASQ Certified Quality Engineer (CQE) or Six Sigma certification, • Experience in the defense, aerospace, or medical device industries, • Hands-on inspection experience, including CMM, optical, or non-contact methods, • Ability to stand and walk on the production floor for extended periods, • Capable of lifting up to 40 lbs and accessing production and inspection equipment, • Manual dexterity for handling tools, parts, and inspection equipment, • Visual acuity sufficient to read prints, inspect parts, and identify quality defects, • Manufacturing facility with exposure to injection molding machines, CNC equipment, and secondary operations, • Requires use of PPE, including safety glasses, gloves, and hearing protection, • Frequent collaboration with production, maintenance, and engineering teams on the floorCompany DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\r\n\r\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description Allied Universal® Technology Services is looking to hire a Senior Applications Engineer. This role provides advanced expertise to installation and service teams, ensuring seamless interoperability across complex security platforms and enterprise applications. The Senior Applications Engineer will drive high-level troubleshooting, custom programming, system commissioning, software upgrades, and advanced diagnostics. Candidates should bring deep proficiency with integration tools, the ability to implement tailored software interfaces, and a proven track record of delivering scalable, secure, and high-performing solutions. Salary Range: $100,000 - $135,000 annually RESPONSIBILITIES: • Design and oversee advanced security system integrations to deliver cohesive, enterprise-level solutions., • Configure LAN (Local Area Network) and wireless network infrastructures to optimize connectivity, system reliability, and performance., • Lead advanced diagnostics and root-cause analysis to ensure peak system functionality and long-term stability., • Partner strategically with Project Managers, End Users, and Technical Teams to guide successful software deployment and utilization., • Resolve complex project-related software and system issues, coordinating with cross-functional technical resources as needed., • Direct escalation protocols, ensuring critical issues are communicated and mitigated promptly to minimize business impact., • Advise and coordinate with leadership to drive efficient timelines, effective resource allocation, and scalable project execution., • Oversee and schedule software licensing, compliance, and advanced training programs to foster continuous professional growth across teams., • Develop and lead end-user training strategies, ensuring seamless software adoption, optimized system operation, and enhanced client satisfaction. QUALIFICATIONS (MUST HAVE): • High school diploma or equivalent, • Minimum of three (3) year of experience programming and troubleshooting access control and video systems, • Advanced knowledge of industry-leading security system and equipment providers, working with enterprise level clients or large projects, • Product specific certification(s) with access control systems and video platforms, such as AMAG, Lenel, Milestone, Genetec, SoftwareHouse, • High level decision-making and complex problem-solving ability to develop innovative solutions that align with organizational strategy, • Expert ability to interpret, evaluate and apply advanced technical documentation, ensuring systems and solutions meet enterprise and client requirements, • Advanced proficiency with MS Office Suite (Excel, Outlook, PowerPoint, Project, SharePoint and Word), • Exceptional verbal and written communication skills, with internal and external stakeholders, • Ability to establish and maintain trusted partnerships across executive leadership, technical teams and client organizations PREFERRED QUALIFICATIONS (NICE TO HAVE): • Salary Range: $100,000 - $135,000 annually, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401(k)plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-EB1 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1441056

Job DescriptionABM, a leading provider of integrated facility solutions, is looking for a Chief Engineer. The Chief Engineer oversees all activities and staff related to the maintenance and repair of mechanical and electrical systems within a property. The goal is maximum life and reliability of all systems. The Chief Engineer must be flexible and willing to perform all duties that are assigned. Those duties may include maintenance and operations of HVAC, mechanical, plumbing and electrical systems. They may also include general building maintenance and building inspections. The Chief Engineer must respond to client requests, open and assign work orders and order parts when necessary. The Chief Engineer must also ensure compliance with expense guidelines, company policy, and governing codes. ABM (NYSE: ABM) is a leading provider of facility solutions with revenues of approximately $6.4 billion and over 130,000 employees in 300 offices deployed throughout the United States and various international locations. ABM’s comprehensive capabilities include electrical & lighting, energy solutions, facilities engineering, HVAC & mechanical, janitorial, landscape & turf, mission critical solutions and parking, provided through stand-alone or integrated solutions. Founded in 1909, ABM provides custom facility solutions in urban, suburban and rural areas to properties of all sizes — from schools and commercial buildings to hospitals, data centers, manufacturing plants and airports. The Company may require that the successful candidate hired for this position be fully-vaccinated for COVID-19, if and to the extent permitted by applicable law. The Company will make exceptions for medical, sincerely held religious belief, or other legally required exceptions. Basic Qualifications: • Bachelor of Science degree in Engineering or related technical field, or five (5) years of equivalent experience, • Bachelor of Science degree in Engineering or related technical field with three (3) years of work experience is preferred, • Without a Bachelor of Science degree in Engineering or related technical field, seven (7) years of experience is preferredResponsibilities:, • Oversee all aspects of the facility’s critical physical infrastructure, • Oversee the development and accuracy of site-level operating procedures and other documentation, • Supervise and escalate as needed ABM’s response to after-hours emergencies at assigned facilities, • Manage the Change Management Program, • Manage the MOP, SOP and EOP Program, • Audit all CMMS databases for accuracy and completeness, produce reports as required at customer request, control system access and user credentials, • Effectively and efficiently manage the operations budget and expenditures of assigned contracts, • Manage the complete physical assets pertaining to the Operation and Maintenance of the critical and non-critical infrastructure equipment and systems, • Resolve all electrical, mechanical and Fire Protection System issues in the facilities while minimizing risk and business impact and communicate issues to management and customers in a timely manner, • Manage the customer relationship and act as the single point-of-contact for all facility-related issues, including schedules, new business, projects, budgets, expansion, and staffing, • Set, review and approve employee work/PTO schedules; audit and process employee time and payroll, • Manage access to the facilities ensuring the appropriate access control lists are maintained and reviewed regularly, • Make space and power recommendations to the customer and manage power and cooling capacity and environmental conditions, • Ensure compliance of Customer SLA parameters and Change Control activities, review and approve all system changes (set-points, thresholds, alarm-points, etc.) which could impact customer operations, • Ensure that ABM training expectations are met and audit the process monthly, • Identify, vet, and approve all sub-contractors who will perform work on-site, • Develop PM contract scopes-of-work, ensure contract terms are fulfilled

Job DescriptionProject Engineer - Data Center Construction - Wayne, NJ This opportunity is working directly with a leading mission-critical data center developer / wholesaler / colo provider. This company provides turnkey data center solutions custom-fit to the requirements of their client's ever-changing mission-critical facility's operational needs. They accomplish this by providing reliability of mission-critical facilities for many of the world's largest organizations (Hyperscale and Enterprise Customers). This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. We are looking for a Project Engineer for a Data Center Construction Project. The Project Engineer will be responsible to assist the Onsite Project Manager of the project with all aspects of managing a data center construction project. This will include providing leadership to contractors and vendors associated with the delivery of company projects. Project assignments for the most part will be regional. The candidate will have overall responsibility for the delivery of assigned projects on budget on time and assurance that the project scope and quality meet company design standards and the objectives set for the project. The successful candidate will have to be exceptionally organized and be great with back-office work (change orders, budgets, paperwork driven, etc.) Responsibilities: • Maintain liaison with various contractors and vendors in order to manage the day-to-day activities that impact the delivery of company's critical facilities construction projects, • Ensure that all day-to-day project responsibilities are met by the contractors and vendors on the project, • Assist the PM with the management of multiple projects simultaneously when needed, • Assist with creating and managing project schedules, • Assist the PM with project plans – size up, costs, budget, scheduling, timeline, manage change orders, etc., • Assists with reporting and RFPs to Contractors, • Deliver Built to Suit projects with a heavy emphasis on value-engineering, • Drive Company Standards uniformly as it regards to Project Delivery by all project participants on all projects, • Manage financial aspects of contracts (progress billing, rental equipment, income / expenses) to protect the company's interest and simultaneously maintain good relationship with the client, • Represent the company in project meetings, • Act as a Liaison with managers of all company departments, • Maintain all logs required to track the progress of the projectQualifications:, • Experience supporting Data Center Construction Projects as a General Contractor, • Minimum of 2-6 years relevant experience in the Data Center Construction Industry, • Client Facing / Client relationship / Client Management skills., • Must be familiar with the design process of building systems for data center and mission critical projects, • Solid Construction Project Management experience, • Effective Communicator – emails, phone and face to face, • Ability to work independently, • Solid Admin skills, • Experience writing / following MOPs and SOPs for critical MEP systems a HUGE plus, • Experience with Autodesk, REVIT, AutoCAD a HUGE plus, • Computer savvy: MS Project, P6 Primavera, Excel a plus After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Senior Mechanical Engineer Electromechanical Systems and Industrial Machinery Employment Type: Full-Time Industry Focus: Electromechanical Equipment I Automation Systems I Industrial Manufacturing I Robotics I Custom Machinery I Food and Beverage I Packaging I Water and Wastewater I Processing Equipment A privately owned, highly respected manufacturer with over 50+ years of success delivering complex, high-quality custom and benchmark electromechanical systems for critical infrastructure. Seeking to add to our engineering team a seasoned professional to help us build custom machinery used across the food and beverage, water treatment, packaging, energy, and automation sectors. Every system is designed, fabricated, and assembled on-site in their U.S.-based facilities. A financially stable, customer-trusted, and operates with speed, precision, and integrity. With low turnover, strong leadership, and a tight-knit, collaborative team, this is a rare opportunity for a senior-level engineer looking to make a real impact. Why Work Here • A privately-owned, financially secure, stable organization with a bold growth plan, your contributions matter here, • Recession-resistant with a strong, diverse client base, • All manufacturing and engineering done on-site in the U.S., • Short lead times and fully integrated workflow, • Diverse vertical markets including food processing, automated packaging, and industrial systems, • Long-tenured team with low turnover and deep technical experience, • Real mentorship from senior engineers and technical leadership, • A collaborative, team-first culture that values craftsmanship, integrity, and innovation, • Competitive salary + performance-based bonuses, • Clear pathways for career advancement into operations, technical leadership, or project management, • Access to ongoing technical training and development resources, • Opportunities to work on meaningful projects that impact essential industries, • Flexibility, autonomy, and a culture where good ideas get traction What You Will Do • Lead the design and development of mechanical and electromechanical systems, • Engineer custom industrial machinery, motion systems, and integration for real-world automation, • Create detailed 3D CAD models and drawings using Autodesk Inventor, SolidWorks, and AutoCAD, • Play a key role in the transition to Autodesk Inventor as the core design platform, • Collaborate with sales, drafting, production, service, and R&D teams to ensure design feasibility and performance, • Attend Factory Acceptance Tests, system demos, and customer meetings, • Conduct hands-on testing and root cause analysis to solve engineering challenges, • Recommend improvements to enhance reliability, manufacturability, and cost-efficiency, • Generate full technical documentation including BOMs, manuals, and assembly instructions, • Provide limited on-site support for commissioning and validation, travel is minimal (0 to 2 percent) What You Bring to the Role • Experience designing electromechanical equipment, custom machinery, and automated systems, • High-level proficiency in Autodesk Inventor preferred, along with SolidWorks and AutoCAD, • Solid understanding of GD&T, tolerance analysis, mechanical fasteners, motion control, and pneumatics, • Familiarity with PLM systems and NPI workflows, • Hands-on background and mechanical aptitude is strongly valued. Candidates who enjoy working on cars, engines, machines, or DIY projects often excel here, • Strong communication and collaboration skills with the ability to present technical information clearly to both internal teams and clients, • Associate or bachelor’s degree in Mechanical Engineering or a related discipline, or equivalent hands-on experience, • Proficiency in Microsoft Office and collaboration tools like SharePoint and Microsoft Teams Nice to Have ~But Not Required While not required, familiarity with the following codes and standards is considered a plus: • ASME Section VIII for pressure vessel design and inspection, • ASME B31.1 and B31.3 for power and process piping, • ASME Y14.5 for geometric dimensioning and tolerancing, • ASME B16.5, B36.10M for flanges, pipes, and fittings, • ASME PTC 4 and PTC 46 for boiler and plant performance testing Traits That Help Engineers Thrive Here • Curiosity and a hands-on mindset, • Creative approach to solving practical engineering problems, • Ability to see the big picture while staying detail-oriented, • Integrity, loyalty, and a team-first attitude, • Enjoys challenging workflow, with fresh projects, • Adaptability in a fast-paced manufacturing environment Let’s Build What’s Next – Together If you’re driven by precision, purpose, and the challenge of making great ideas real, we’d love to hear from you. Looking forward getting to know you… We are as well as our client are an equal opportunity employer and welcome all qualified applicants regardless of race, gender, age, disability, veteran status, or other protected classification.

Job Description Electrical, Controls Engineer - Industrial Electro-Mechanical Machinery Industry Focus: Industrial Machinery I Electromechanical Equipment I Custom Automation Systems Robotics I Industrial Controls I Food and Beverage Manufacturing I Packaging Equipment I Water and Wastewater Treatment I Process Equipment I OEM Machine Building Overview: We are currently seeking to identify (2) Electrical Controls Engineers to join a well-established and growing industrial equipment manufacturer with over 50 years of engineering excellence. One opportunity is ideal for a junior to mid-level candidate with at least 2+ years of relevant experience, and the other is targeted for a senior-level engineer with more years of hands-on experience in electrical design, programming, controls, and industrial automation. This is your chance to join a team that builds large-scale electromechanical systems from concept through completion. From food production lines to custom process and water treatment equipment, you'll be working on machinery that makes a real-world impact. Responsibilities: · Design, develop, and program industrial electrical control systems to meet engineering and client requirements · Create electrical schematics, wiring diagrams, and panel layouts using AutoCAD Electrical or similar design software · Specify, select, and configure control system components such as PLCs, VFDs, relays, sensors, and breakers · Program PLCs and HMIs (Allen-Bradley, Siemens, or similar platforms preferred) · Layout and design control panels and motor control centers (MCCs) · Perform validation testing and troubleshoot electrical systems during build and final assembly · Collaborate closely with mechanical engineers, software engineers, and production teams to ensure full integration · Provide technical documentation including BOMs, manuals, wiring lists, and startup procedures · Travel as needed for commissioning and system validation (minimal and planned in advance) · Stay current with evolving industry technology, best practices, and safety standards Qualifications: We are hiring for two experience levels. Candidates must meet the criteria for one of the following profiles: Junior to Mid-Level Role: · Minimum 2 years of experience in electrical controls, panel design, or related engineering environment · Experience with AutoCAD Electrical or similar drafting tools · Working knowledge of industrial components and safety regulations · Basic PLC programming knowledge or exposure to automation software · Strong interest in hands-on engineering, testing, and troubleshooting · Bachelor's degree in Electrical Engineering or equivalent hands-on experience Senior-Level Role: · Experience in electrical controls and industrial automation · Proficiency in AutoCAD Electrical and strong PLC/HMI programming experience · Deep understanding of UL, NEC, NFPA 70E, and electrical safety standards · Demonstrated success leading projects or contributing to complex custom machinery builds · Ability to mentor junior team members and drive design improvements · Background in electromechanical system design and manufacturing support What Makes This Opportunity Unique: · Privately owned and financially strong company with over 50 years of proven success · All engineering and manufacturing is done in-house at our US-based facilities · Recession-resistant with projects in food processing, water treatment, packaging, and more · Work directly on high-impact custom systems from design to completion · Short lead times and an integrated design-build process · Access to a seasoned engineering team for mentorship and collaboration · Competitive salary structure with performance bonuses · Opportunities for growth into technical leadership or project management · Continued access to learning and development in electrical, automation, and mechanical engineering · Team-focused culture that values practical problem-solving, quality, and innovation Traits That Set You Up for Success Here: · Detail-oriented and self-driven with a strong sense of accountability · Hands-on mindset and curiosity to understand how systems work · Enjoy working on one-off and custom systems that challenge your engineering creativity · Collaborative and open communicator, ready to share and receive feedback · Willing to dive into troubleshooting and help bring machines across the finish line · Honest, reliable, and committed to continuous improvement Take the Next Step in Your Career: If you are passionate about industrial electrical systems and automation, whether you are building your skills or bringing a wealth of experience, we want to hear from you. These roles offer the chance to work on meaningful projects with a stable, growing company where your contributions matter every day. Apply now to explore how you can be a part of building the next generation of industrial automation and electromechanical systems. Equal Opportunity Commitment: We and our client are equal opportunity employers and welcome all qualified applicants regardless of race, religion, gender, age, disability, veteran status, or any other protected classification.

Job Description Thank you for considering IT Concepts dba Kentro, where innovation drives opportunity and collaboration leads to success. Our dynamic community of experts is fully committed to advancing our customers' missions, fostering professional growth, and making a positive impact on our communities. Our transition to Kentro in 2025 reflects a rich legacy built upon the foundation of IT Concepts. Rather than leaving ITC behind, we confidently embrace a future centered around the Core of More. By joining our supportive community, you will find that Kentro is dedicated to your personal and professional development. Together, we can drive meaningful change, spark innovation, and achieve extraordinary milestones. Kentro is hiring an experienced Customer Service Engineer (System Administrator) to support our VA-ESOM- End Point Support and Operations Monitoring contract across the United States. The VA is responsible for providing comprehensive onsite and remote support to IT customers across all VA Administrations and special program offices, including direct support of over 340,000 VA employees and thousands of contractors who use government-furnished IT equipment and infrastructure. The VA provides support staff across 100+ CONUS and OCONUS locations including difficult-to-accommodate locales, such as high cost of living or under supported economic areas, where VA offices or facilities may be located and require onsite services. A Customer Service Engineer is able to quickly respond to end user requests for assistance when existing manuals and scripted responses are not sufficient to meet user needs. Must be able to interact with customers and diagnose problems and lead customers through the necessary steps to correct their issues. Must have experience in conducting routine system administration tasks and logging data in system admin logs. Responsibilities: • Support the Government with the installation, maintenance, testing, and troubleshooting of computer systems and equipment, ensuring optimal operation and user satisfaction., • Assist in delivering both remote and desk-side technical support, responding to IT support tickets, and performing diagnostic and repair activities on both hardware and software components., • Aid in setting up and maintaining user accounts, interfacing with other software applications, compiling reports, and responding to customer requests., • Assist in the maintenance of Active Directory and other system accounts, support connectivity and client applications, and assist in the configuration and support of local and wide area network services., • Monitor open tickets in VA’s ServiceNow customer incident ticketing system to ensure adherence to business processes, and any discrepancies identified shall be reported with proposed corrective actions for approval before implementation., • The work environment involves both sedentary and active elements, requiring careful handling of electronic components and adherence to safety precautions to prevent injuries or equipment damage., • Utilize debugging protocols and processes., • Troubleshoot problems and issues identified by customers and implement corrective actions quickly., • Facilitate equipment returns, deployments, unboxing, inventorying, and verification., • Possessing the physical capability to handle demanding tasks such as lifting equipment up to 50 pounds and bending, twisting, squatting, reaching, climbing, and crawling to navigate through facility spaces to access and repair equipment., • Stand and move throughout the work area for prolonged periods. Locations: East Orange VA Medical Center Travel: • A Customer Service Engineer may be asked to provide additional support during temporary periods of increased workload, referred to as “surge capacity.” These requests would be discussed and coordinated beforehand and could require travel of up to two (2) weeks., • Overtime is not authorized for any work to include this surge capacity. This Kentro position provides on-site support for the Veterans Health Administration (VHA). The VHA has facility-specific vaccination and testing requirements (outlined below). If chosen for this role, candidates may be required to show proof that the below vaccinations and testing are current. The VHA will provide guidance on specific documents needed and how to request reasonable accommodations. • Vaccine requirements may include COVID-19, Influenza, Measles Mumps & Rubella (MMR), Hepatitis B, and/or Varicella., • Bachelor's degree in computer science, electronics engineering, or other engineering or technical discipline or 8 years of additional relevant experience may be substituted for education., • 2+ years of experience in IT Technical Support, Help Desk or System Administration., • Experience in conducting routine system administration tasks and logging data in system admin logs, • Knowledge on a number of debugging protocols and processes, • US Citizen or Green card holder, • Willing and able to get a Public Trust Suitability clearance The Company We believe in generating success collaboratively, enabling long-term mission success, and building trust for the next challenge. With you as our partner, let’s solve challenges, think innovatively, and maximize impact. As a valued member of our team, you have the unique opportunity to work in a diverse range of technology and business career paths, all while supporting our nation and delivering innovative technology solutions. We are a close community of experts that pride ourselves on creating an environment defined by teamwork, dedication, and excellence. We hold three ISO certifications (27001:2013, 20000-1:2011, 9001:2015) and two CMMI ML 3 ratings (DEV and SVC). Industry Recognition Growth | Inc 5000’s Fastest Growing Private Companies, DC Metro List Fastest Growing; Washington Business Journal: Fastest Growing Companies, Top Performing Small Technology Companies in Greater D.C. Culture | Northern Virginia Technology Council Tech 100 Honoree; Virginia Best Place to Work; Washington Business Journal: Best Places to Work, Corporate Diversity Index Winner – Mid-Size Companies, Companies Owned by People of Color; Department of Labor’s HireVets for our work helping veterans transition; SECAF Award of Excellence finalist; Victory Military Friendly Brand; Virginia Values Veterans (V3); Cystic Fibrosis Foundation Corporate Breath Award Benefits We offer competitive benefits package including paid time off, healthcare benefits, supplemental benefits, 401k including an employer match, discount perks, rewards, and more. We invest in our employees – Every employee is eligible for education reimbursement for certifications, degrees, or professional development. Reimbursement amounts may fluctuate due to IRS limitations. We want you to grow as an expert and a leader and offer flexibility for you to take a course, complete a certification, or other professional growth and networking. We are committed to supporting your curiosity and sustaining a culture that prioritizes commitment to continuous professional development. We work hard; we play hard. Kentro is committed to incorporating fun into every day. We dedicate funds for activities – virtual and in-person – e.g., we host happy hours, holiday events, fitness & wellness events, and annual celebrations. In alignment with our commitment to our communities, we also host and attend charity galas/events. We believe in appreciating your commitment and building a positive workspace for you to be creative, innovative, and happy. Commitment Equal Opportunity Employment & VEVRAA Kentro is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, status as a protected veteran or any other status protected by applicable federal, state or local law. Kentro is strongly committed to compliance with VEVRAA and other applicable federal, state, and local laws governing equal employment opportunity. We have developed comprehensive policies and procedures to ensure our hiring practices align with these requirements. As part of our VEVRAA compliance efforts, Kentro has established an equal opportunity plan outlining our commitment to recruiting, hiring, and advancing protected veterans. This plan is regularly reviewed and updated to ensure its effectiveness. We encourage protected veterans to self-identify during the application process. This information is strictly confidential and will only be used for reporting and compliance purposes as required by law. Providing this information is voluntary and will not impact your employment eligibility. Our commitment to equal employment opportunity extends beyond legal compliance. We are dedicated to fostering an inclusive workplace where all employees, including protected veterans, are treated with dignity, respect, and fairness. How to Apply To apply to Kentro Positions- Please click on the: “Apply for this Job” button at the bottom of this Job Description or the button at the top: “Application.” Please upload your resume and complete all the application steps. You must submit the application for Kentro to consider you for a position. If you need alternative application methods, please email and request assistance. Accommodations To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. If you need to discuss reasonable accommodations, please email . #LI-SB1

Job Description Climatec LLC seeks Project Specialist (Multiple Positions) at its facility located at 300 Broadacres Drive, Suite 400, Bloomfield, New Jersey 07003. Identify & distinguish different point types in Building Automation System Controller (AO, AI, BO, BI). Locate&identify components of commercial Air Handling Unit syst capable of heating & cooling multiple floors. Locate & identify modular chiller syst, Plate & frame heat exchangers, shell & tube heat exchangers, free cooling mechanical systs components which provide Chilled, Condenser & Heating hot water to various mechanical systems. Commission project w/3rd-party commissioner requiring ability to understand & run thru sequence of ops on each syst. Document Project Start-up & Progress Tracking. Liaise b/w Mechanical & controls contractor. Assist subcontractor w/construction process. Work on ctrl panel startup & configuration (direct connect/standalone). Work w/Relays-coil & contact verification, Starters, VFD, & System safety devices. Use ctrl syst tech that regulate & maintain HVAC system components & control system analysis utilization of numerical, data processing SW for effective ctrl solutions. Use ctrl syst tools e.g. Lan cable tester, Multimeter (testing on voltages, amps AC/DC, clamp option), Serial cables & uses, Tone generator, Crimping tool, Fluke volts tester, Routers. Use ctrl system process Ctrl syst distribution v. centralized, Linear ctrl solution, PID. Use platforms Niagara web-based systs, Alerton/Compass web-based systs, Distech web-based systs, Ethernet/IP connections, Modbus RS-485, Modbus RS-232, SNMP Integration, Lon. Provide controls database, graphics, & programming for sequences as provided by the Design Specialist, project specifications, or other applicable sources. Provide accurate controls of systems start-up & commissioning including point-to-point checkout on projects as assigned. Verify correct alarm, annunciation, & other actions by equipment, devices, panels, & annunciators of controls projects. Develop the specialized software required for a complete integrated building automation system or energy management system. Work with multiple proprietary systems to make them talk on a unified platform using specialized software & specialized code where required including Niagara, Alerton based software. Use specialized software to write custom applications for building performance or provide automation for system backup for ongoing building management. Use reporting software to follow-up on building performance & make adjustments to enhance the performance & tuning of the system. Use existing software & develop enhancements to provide additional functionality for energy reporting & graphic interfaces for customer dashboards. Develop custom scripts to query existing databases for service upgrades. Develop enhancements to existing applications to enhance functionality & efficiency. Support installation & startup personnel with adjustments to software as required. Provide information & support for other contractors on the project site. Debug mechanical & installation issues that can come up when executing the static & dynamic start-up & commissioning of building controls. Provide start up documentation including, check out logs & commissioning documents as required for assigned projects. Ensure timely software backups are created for projects & software development. Provide service support on existing systems ensuring proper & efficient operation as well as providing ongoing support to the facility’s building engineers. Complete time sheets, service orders, & other paperwork required for this position in an accurate & timely manner. Assist in preparing of submittal documents, as-built drawings, & Operation & Maintenance Manuals. Initiate the transition from Operations Team to Service Team. Verify that proper backups, as built & facility performance software is in place. Assist Sales team during estimating phase including potential product or system demonstrations. Assist in preparing as-built drawings & Operation & Maintenance Manuals. Assist in turnover of projects from Operations Team to Service Team. REQS: This position requires a Bachelor’s degree, or foreign equivalent degree in Mechanical Engineering, Electrical Engineering, Electronic Engineering, HVAC Controls Engineering or a related field and 5 years of experience as a Mechanical Engineer, Electrical Engineer or occupation involving HVAC Engineering. Additionally, the applicant must have employment experience with: (1) HVAC system operations and mechanical and electrical systems within a facility; (2)Computer operating systems including MS Office Suite of products; (3) ACAD, or similar program/software; (4) Configuring and debugging computer and networking problems; (5) Electronic equipment such as volt meters, amp meters, and oscilloscopes; (6) Troubleshooting electric and electronic circuitry including reading and interpreting electrical and electronic diagrams; (7) AC power circuitry including breakers, and multi-phase power (120VAC and greater); and (8) DDC or special systems that control buildings. Travel: 10% International and Domestic Travel. No Telecommuting. WAGE RANGE: $84,989 - $141,000. Applicants who are interested in this position should apply online at , search Project Specialist (4302644)

Job Description Auto-Chlor is now hiring an Electrical Engineer-Equipment Design to lead our engineering development initiatives. We’re looking for a leader who will contribute to our “People First” culture. This position would work in-office full-time at our facility in MEMPHIS, TN. What’s in it for you? • A people first culture where contributions and collaboration are encouraged and celebrated., • A competitive salary up to $150k annually with an excellent benefits package., • Ongoing wellness initiatives to improve your health and well-being. What are some of the day-to-day responsibilities? • Develops and implements solutions for dishwasher and dispensing innovation projects, including both new equipment development and existing equipment innovation. Projects vary in duration from two months to over a year based on Project Brief requirements., • Administers regulatory compliance with agencies such as NSF, CSA, UL, BOCA, ASSE, UPC, and Federal, State, and Local authorities. Provides support to the field sales team on regulatory issues, with an emphasis on maintaining customer equipment operation without disruption to business., • Provides technical support to field sales team, contractors, consultants, engineers, and architects., • Develops and manages technical documentation for design control and field use. Requirements: • Bachelor of Science in Engineering Degree or comparable years of work experience., • 5-10 years of electrical and electronic design experience, along with experience working with regulatory agencies. Experience in the commercial appliance industry is preferred., • Embedded Software/hardware design, • Knowledge of codes and standards for plumbing, sanitation, electrical, and building (NSF, CSA, UL, BOCA, ASSE, UPC, FDA), • Electrical/electronic circuit design, • CAD Modeling – Autodesk Inventor Preferred Location: 746 Poplar Ave Memphis, TN 38105 #PROFESSIONAL

Job DescriptionAbout Weee! Weee! is the largest and fastest-growing ethnic e-grocer in the United States, operating in one of the largest underserved categories in retail with affordable access to exciting ethnic food. By partnering with local suppliers, redesigning the value chain and leveraging social buying, Weee! is reshaping the grocery business entirely. You can read more about us on Business Insider, Reuters and TechCrunch. Weee! is headquartered in Fremont, CA, and is currently available coast to coast with exceptional growth (5x YoY) across geographies, categories and ethnicities. We have raised $800M+ in funding to date from leading investors including Softbank Vision Funds, DST, Blackstone, Tiger Global, Lightspeed Ventures, Goodwater Capital, XVC and iFly. The opportunity now is to join a rocketship as we prepare for the next stage of growth, and an eventual public listing. This role is onsite 5 days a week in Clifton, NJ About the Role As a Field Process Engineer I at Weee, you will drive initiatives to optimize operational processes, improve efficiency, and deliver world-class customer experiences. This role requires strong analytical skills, project management expertise, and the ability to collaborate across multiple teams and stakeholders to execute scalable solutions in a fast-paced, dynamic environment. Responsibilities • Lead small-scale cross-functional projects focused on operational excellence and process improvement., • Partner with Central PE to identify and track operational metrics., • Collaborate with Operations, Supply Chain, and PE teams to implement solutions that improve workflow efficiency and reduce costs., • Identify and address basic root causes in current processes, create corrective action plans to achieve operational goals and ensure alignment with operational standards., • Help implement solutions and provide training to address operational challenges., • Conduct time studies and analyze data to identify trends, root causes, and opportunities for system and process improvement., • Collaborate with the central PE team and operation team to develop and maintain the standard operating procedures (SOPs) and work instructions., • Proactively mitigate safety risks within the production process, ensuring adherence to safety protocols., • Support warehouse daily operations as needed including 5S maintenance, equipment forecasting and management, • Bachelor's degree in Business, Operations, Supply Chain, Engineering, or a related field., • 1+ years of experience in internships or project management within operations, supply chain, or logistics., • Strong analytical skills with experience in data analysis tools (e.g. Advanced Excel)., • Understanding of basic concepts of lean manufacturing, continuous improvement, and Six Sigma, • Ability to work Individually with observation and analysis tools (e.g. DMAIC, fishbone diagram), • Excellent communication skills with the ability to present complex ideas clearly to both technical and non-technical audiences., • Proven ability to manage multiple priorities and work effectively in a fast-paced, ambiguous environment., • Ability to work under extreme temperatures(0~30°ree;F) in Freezer/Cooler environments, • Comprehensive health insurance package, including medical, dental, and vision. PPO/HMO packages, • 401k, 4% company match, • Equity and Bonus, • Vacation, sick and holiday time off, • Monthly mobile stipend, • The US base salary range for this full-time position is $63,000 - $74,000, • This role may be eligible to discretionary bonus, incentives and benefits Please note that the compensation details listed in US role postings reflect the base salary only, and do not include any variable compensation elements. Weee! is an equal opportunity employer welcoming all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other basis prohibited by law. Discrimination or harassment of any kind is not tolerated at Weee!. If you need to inquire about an accommodation or need assistance with completing the application, please email us at . For more jobs and to find out more about Weee!, visit our career page: Softbank Vision Funds

Job DescriptionScientist – Engineer, MSAT The Scientist-Engineer, MSAT performs process and analytical experimental studies as part of a team that is effectively delivering cell therapy services to clients in accordance with defined scope of work, timelines, and budgets. This includes leading projects in process development, technology transfer and continuous improvement of our client's novel manufacturing processes. Our goal is to support our clients in developing commercially viable cell therapy products, so that they can become accessible to all. • Accountable for the design and execution of experimental studies in the laboratory, for example:, • Perform laboratory experiments for client projects, • Perform analytical testing for client projects, • Preparation and scheduling of laboratory equipment for experiments, • Provide technical leadership of client products during manufacturing and development, for example:, • Direct technical communication with clients during manufacturing and development, • Support manufacturing in identifying and resolving manufacturing process constraints, • Lead the generation of manufacturing and development documentation, for example:, • Generating experiment protocols and reports for development projects, • Generating draft batch records and other manufacturing documentation, • Generating manufacturing risk assessments, such as FMEA, • Perform data analysis to reach actionable conclusions, for example:, • Compile and analyze experimental data, • Present experimental data internally and externally to clients, • Supervise direct reports.REQUIREMENTS, • Bachelor's degree in relevant life science or engineering discipline, • Minimum of 3 years' experience in aseptic cell processing, cell culture and cell analytics under the guidance of scientific protocols, • Demonstrated ability to deliver projects to specific timelines and budgets, • Experience in working effectively and delegating tasks in a team-based environment, • Demonstrated ability in technical writing and the preparation of, protocols and reports, presentations and/or other communications, • Basic understanding of the technical principles, theories and concepts of cell therapy or similar products, • Aseptic processing, Good Manufacturing Practice (GMP), communication skills, specific process and analytical equipment, • This job may require occasional evening and weekend work.

Job Description Ignite Your Career: Sales Estimator Are you a precision-focused construction pro with a keen eye for detail and the persuasive chops of a top-tier salesperson? We're not just looking for an estimator; we're seeking a dynamic deal-closer—a Sales Estimator to be the architect of our profitable growth. This is a high-impact, professional role where your technical expertise in complex estimating meets your ability to forge lasting customer relationships and secure high-value sales. If you're ready to use your deep estimating experience to master project specifications, drive technical sales, and directly impact our bottom line, join our team! Your Mission: Estimating & Sales Execution You will serve as the crucial link between project scope and profitable execution, utilizing a powerful combination of technical mastery and commercial savvy. 1. Strategic Project Analysis & Bidding: • Decipher the Blueprint: Conduct an exhaustive study, evaluation, and understanding of complex job plans, construction specifications, and technical scope documents., • The Precision Take-Off: Lead the charge in preparing meticulous take-offs and estimates by researching all contracts, job specifications, and schematic drawings. Your estimates will be the foundation for project success, accounting for material, labor, logistics, and ensuring alignment with company profit policies., • Secure the Win: Prepare the final, compelling quote and deploy your sales acumen to aggressively secure the sale, transforming estimates into awarded contracts., • Public Sector Scout: Proactively research and identify public bid opportunities for lucrative government and municipal projects., • Doubt Destroyer: Submit any necessary Requests for Information (RFIs) to the job owner to ensure absolute clarity and a risk-free quote. 2. Product & Process Command: • Technical Guru: Maintain a deep, up-to-date knowledge of the company's products, services, and technical capabilities, including materials, specifications, functionality, and assembly requirements., • Estimation Integrity: Rigorously document all estimating logic, technical details, and analysis using MS Excel or industry-standard estimating software., • Continuous Insight: Monitor overall sales and product trends to quantify the value and market position of various product lines. 3. Sales, Customer Focus & Account Leadership: • Relationship Architect: Establish personal rapport with direct decision-makers and their technical staff within customer, contractor, and government agencies., • High-Touch Service: Serve as the primary point of contact, expertly responding to customer inquiries, issues, and complaints to ensure complete, raving satisfaction. Proactively manage product returns, replacements, and project scope changes., • Key Account Steward: Manage key account relationships with surgical precision to maximize retention of existing business and aggressively pursue new business opportunities., • Bid Agility: Quickly revise bid documents to accurately reflect any changes in project scope, materials, or technical requirements. 4. Interdepartmental Synergy: • Procurement Partner: Collaborate closely with the Purchasing team for the most efficient and cost-effective procurement of required materials, considering vendor performance, competitive pricing, and critical product certifications., • Logistics & Finance Coordinator: Seamlessly coordinate with internal Warehouse and Accounting departments to ensure accurate inventory levels, timely delivery schedules, and smooth payment processing. What You Bring: The Winning Profile • Elite Construction Estimating Experience: At least four to six years of successful, hands-on experience in construction, manufacturing, or a related technical estimating position with direct exposure to complex projects., • Degree of Distinction: Bachelor’s Degree in Construction Management, Engineering, Manufacturing, or a related technical field is highly preferred., • Sales & Service Power: A minimum of two years of successful experience in sales and customer service within a commercial B2B or B2G sales model., • Estimating & Pricing Mastery: Expert, demonstrable knowledge of construction estimation methodologies, quotation protocol, and advanced pricing strategies., • Blueprint Proficiency: Exceptional ability to read, comprehend, and interpret detailed specifications and trade drawings to fully understand the complete spectrum of job requirements., • Independent Drive: Proven capacity to develop and optimize personal procedures and processes for efficiently managing and completing high-volume work assignments., • Technical Toolkit: Advanced proficiency with MS Office applications (especially Excel for complex calculations) and strong familiarity with CRM software. Intelligent Traffic Supply Products, LLC (ITSP) is the leading specialized provider for modernizing New Jersey's roadways. We don't just supply traffic equipment—we engineer and deliver the precision components that form the backbone of Intelligent Transportation Systems (ITS) across the state. We specialize in the expert assembly and distribution of custom-built, high-specification traffic control solutions for a rapidly expanding base of municipal clients. Our comprehensive suite of products is crucial for building safer, smarter, and more efficient urban environments. It includes: At ITSP, we are dedicated to building the future of New Jersey's traffic flow, one smart solution at a time.Revitalized Company Overview: Intelligent Traffic Supply Products, LLC\r\n\r\n\r\n\r\nIntelligent Traffic Supply Products, LLC (ITSP) is the leading specialized provider for modernizing New Jersey's roadways.\r\n\r\nWe don't just supply traffic equipment—we engineer and deliver the precision components that form the backbone of Intelligent Transportation Systems (ITS) across the state. We specialize in the expert assembly and distribution of custom-built, high-specification traffic control solutions for a rapidly expanding base of municipal clients.\r\n\r\nOur comprehensive suite of products is crucial for building safer, smarter, and more efficient urban environments. It includes:\r\n\r\n* Advanced Control Systems: Cubic ITS signal controllers and sophisticated system communications equipment.\r\n* Infrastructure Components: Traffic signal assemblies, durable traffic poles, and assorted hardware and software.\r\n* Detection & Safety: Cutting-edge pedestrian and vehicle detection technology, and complete pedestrian crosswalk systems.\r\n\r\nAt ITSP, we are dedicated to building the future of New Jersey's traffic flow, one smart solution at a time.

Job Description Commissioning Engineer - Wayne, NJ Our client is a Engineering Design and Commissioning Company that is a leader in the data center space. They provide design, commissioning consulting and management expertise in Data Center / Mission Critical Facilities Space with the mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation, and Hyperscale Data Center Projects. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Execute onsite commissioning plans, provide and gather specifications, and execute assignments in a multidisciplinary engineering Commissioning role for large facility projects. The commissioning experts adhere to a thorough quality management - QM /QA / QC process and procedures that validate and document our client's systems. Commissioning methodology covers a wide range of procedures to verify the integrity and performance of their customer's mission critical support infrastructure. Responsibilities: • Participate in daily commissioning activity meetings which services include:, • Equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation, • Prepare commissioning test procedures and reports; Develop and maintain commissioning logs, equipment checklist, and other tools to track commissioning projects; Write comprehensive reports which include the following sections: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals, • Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning, • Integrated system testing; Load Bank Testing; Compilation of all testing procedure results, • Develop and administer functional tests for various systems, such as: electrical distribution systems, UPS, standby generators, etc., • System Assembly; Commission plan preparation ; Follow company QC process and procedures, • Help lead and manage any external resources; Schedule and direct periodic commissioning meetings; Attend construction and coordination meetings if required for the project ;, • Interface with clients, contractors, equipment vendors and owners agents as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, etc., • 2-5+ years experience with Data Center Commissioning, • Bachelor's / Associates Degree as an Electrical Engineer a plus, • Experience commissioning enterprise data centers, colos, and hyperscale companies, • A/E experience working in complex facilities or mission critical projects a big plus, • Previous Data Center / Mission Critical experience a must, • Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction), • Equipment testing experience in a Critical Facilities / facility environment, • Previous experience conducting Level 1-5 Commissioning, • Possess basic knowledge of systems design for various projects, • Possess basic knowledge of systems design for various projects, • Experience using Microsoft Word, Excel, and Microsoft Project After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description We are seeking a detail-oriented and experienced Validation Engineer to join our Quality team. In this role, you will take the lead in validating equipment, software, and manufacturing processes to ensure compliance with internal procedures, FDA/ISO standards, and customer requirements. You will play a key role in developing validation strategies, executing protocols, and supporting continuous improvement initiatives in a fast-paced, highly regulated medical device manufacturing environment. What You’ll Do • Lead validation projects for CNC, robotic, and other manufacturing equipment., • Develop and execute validation documentation, including:, • Validation Master Plans (VMP), • User Requirement Specifications (URS), • Installation Qualification (IQ), • Operational Qualification (OQ), • Performance Qualification (PQ), • Conduct risk assessments, validation reviews, and change control activities., • Collaborate with cross-functional teams, customers, and suppliers to align on validation requirements., • Support continuous improvement and Lean initiatives to optimize equipment performance and reduce waste., • Maintain up-to-date knowledge of GMP, ISO 13485, and validation best practices., • Education: BS in Mechanical Engineering or related field (Master’s preferred)., • Experience: Minimum 3 years in validation engineering, with hands-on experience writing and executing IQ/OQ/PQ protocols., • Background in highly regulated industries; medical device experience and ISO 13485 exposure strongly preferred., • Familiarity with CNC and robotic manufacturing processes., • Strong understanding of measurement system analysis (e.g., Gage R&R) and statistical tools (MiniTab preferred)., • Knowledge of GMP, Lean, and Six Sigma (Green/Black Belt certification is a plus)., • Excellent communication skills with the ability to work across departments and with customers., • Be part of a company dedicated to producing high-quality orthopedic medical devices., • Work on cutting-edge machine validation projects with opportunities for growth and advancement., • Collaborative and supportive team environment. Work Location: Multiple locations Company DescriptionPhillips Precision, Inc. has been providing a long-term, rewarding career path in Medical Manufacturing for Over 50 Years. Medical manufacturing provides many benefits - including a stable industry, competitive salaries, hands-on access to the latest technologies and the pride of knowing that you're working on real, tangible products that improve the health and well-being of people young and old. We have a diverse multicultural staff with varied backgrounds which brings a broad spectrum of new ideas and perspectives. We also maintain a manufacturing culture of continuous improvements with LEAN manufacturing disciples. This means we work smart, and efficiently with the ability to create custom solutions for the customers we serve. Medical Manufacturing at Phillips Precision is exciting and rewarding, with access to the latest technology and a supportive workplace environment.Phillips Precision, Inc. has been providing a long-term, rewarding career path in Medical Manufacturing for Over 50 Years.\r\n\r\nMedical manufacturing provides many benefits - including a stable industry, competitive salaries, hands-on access to the latest technologies and the pride of knowing that you're working on real, tangible products that improve the health and well-being of people young and old.\r\n\r\nWe have a diverse multicultural staff with varied backgrounds which brings a broad spectrum of new ideas and perspectives. We also maintain a manufacturing culture of continuous improvements with LEAN manufacturing disciples. This means we work smart, and efficiently with the ability to create custom solutions for the customers we serve.\r\n\r\nMedical Manufacturing at Phillips Precision is exciting and rewarding, with access to the latest technology and a supportive workplace environment.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking an experienced, highly motivated Control Systems Engineer — LabView Developer to join its rapidly growing team. The Control Systems Engineer will have ownership of the design, development, and commissioning of the control system for complex equipment within Thea Energy’s stellarator fusion demonstration plant. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Work with a team of experts in developing controls for Thea Energy’s systems., • Architect, program, and document cutting-edge distributed Data Acquisition and Control (DAC) projects utilizing National Instruments hardware and software, such as LabVIEW, VeriStand, TestStand, SystemLink incorporating DAQ, PXI, cRIO, and RIO (FPGA) architectures., • Develop modular, readable, and reusable LabVIEW code, emphasizing reliability and continual improvement., • Create engineering tools, including both desktop and web-based testing applications., • Integrate VHDL and C codes into hardware-in-the-loop (HIL) systems, utilizing both NI and open-source hardware and software platforms., • Collaborate with hardware and systems engineers to define interfaces and requirements and ensure seamless integration of DAC/HIL solutions., • Troubleshoot and swiftly resolve issues in LabVIEW-based DAC/HIL systems., • Develop and execute comprehensive test plans., • Document design specifications, test procedures, and user manuals for automation and acquisition systems.Ideal Experience & Skillsets:, • Extensive experience as a control engineer on complex, large-scale systems., • Experience with magnetic confinement fusion, aerospace, or other highly technical industries., • B.S. or M.S. in Computer Science, Electrical Engineering, or a related physics or engineering discipline., • 5+ years of hands-on LabVIEW development experience; experience with VeriStand, TestStand and SystemLink., • Proven success in advanced LabVIEW programming, focusing on Data Acquisition and Control or HIL systems, within scientific, industrial, or research environments., • Proficiency with National Instruments hardware, including cRIO, PXIe, and expertise in both Windows and RT Linux environments., • Competency in HIL/SIL software architecture., • Proficient in the development and optimization of LabVIEW applications and LabVIEW Certification (Certified LabVIEW Developer and/or Architect) is advantageous., • Exceptional work ethic and communication skills.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job Description Job Title: Project Engineer Company: PTI Tech Location: Clifton, NJ (On-site) Industry: Manufacturing / Metal & Plastic Injection Molding Experience Level: Mid to Senior Level About PTI Tech PTI Tech is a leading provider of advanced manufacturing solutions, specializing in precision metal and plastic injection molding for the aerospace, medical device, industrial, and defense industries. We are growing our technical team and seeking a skilled and motivated Project Engineer to support innovative product and process development efforts. Position Summary PTI Tech has an immediate opening for a Project Engineer to support the design and development of new products, components, and advanced manufacturing processes. This position plays a key role in PTI’s R&D and production programs, working closely with the Engineering Manager and cross-functional teams. Responsibilities include initial concept design, 3D modeling, analysis, prototyping, process development, vendor coordination, and supporting the implementation of novel engineering solutions. The ideal candidate is passionate about mechanical design, manufacturing innovation, and automation. We’re looking for a hands-on engineer with strong problem-solving skills, project leadership experience, and the ability to work effectively in a fast-paced, team-oriented environment. Key Responsibilities Design & Development • Develop production processes, tooling, fixtures, and manufacturing cells with a focus on quality and repeatability., • Perform technical and requirements analysis, researching new materials, technologies, and processes., • Apply DFM to assess part moldability and recommend design improvements for injection molding (plastic, metal, ceramic)., • Lead engineering projects from concept through production, coordinating cross-functional teams and external partners., • Create and manage project timelines, task assignments, and deliverables., • Write detailed work instructions, set up manufacturing equipment, and establish standard operating procedures (SOPs)., • Design and implement automation processes to increase manufacturing efficiency and consistency., • Program and troubleshoot Universal Robots and Arburg robotic systems., • Design and develop custom end-of-arm tooling for robotic automation., • Integrate automation systems into production workflows and support new product introductions (NPIs)., • Support ongoing production by resolving technical issues and improving part quality., • BS or MS in Mechanical Engineering, Materials Science, or related field., • Proficiency in CAD design using SolidWorks., • 5+ years of experience in mechanical design and development of injection-molded or over-molded parts and assemblies., • Strong knowledge of DFM, injection molding (plastic/metal), tool and mold design, and automation integration., • Experience with machine shop processes: turning, milling, EDM, and CNC machining., • Fluent in interpreting engineering drawings and applying GD&T., • Strong project management and organizational skills., • Experience in aerospace, medical device, defense, or industrial sectors., • Familiarity with additive manufacturing., • Experience with process validation, lean manufacturing, and quality systems., • Program management experience is a plus. Company DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\r\n\r\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job Description Public Safety RF Engineer Location: Clifton NJ Description C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C Squared Systems is currently seeking a Public Safety RF Engineer responsible for public safety system engineering functions relating to RF/Wireless communications pertaining to In-Building and outdoor, passive and active (Distributed Antenna System) systems. The incumbent will work hand in hand with senior public safety RF engineers in various aspects of DAS design, installation, commissioning, testing, troubleshooting and remote monitoring. The incumbent will also perform various operational support functions such as parts procurement, equipment repair/return, inventory, and documentation. Domestic travel will be expected approximately 25-50% of the time, with the majority of that being within the Greater New York area, but does include other markets as needed. Primary Responsibilities: • Design of Radio Frequency (RF) wireless communication systems and technology, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Develop Request for Information (RFIs) and Requests for Proposals (RFPs) evaluate solutions, manage implementations, and perform Independent Verification & Validation, • Coordinating with AHJ’s, FCC License holders, Carriers, End Users, Facility Managers, and Equipment Vendors, • Supporting the efforts of our technicians and engineers and directly supporting customers, • Ensuring customer satisfaction, • Work hands on with system components such as antennas, fiber optics, coax, and RF amplifiers and receivers, • Radio Frequency Exposure Studies, Intermodulation and Interference Analysis, • Multi-task projects on a day-to-day basis, • Travel to various job sites within Greater New York and other markets., • Strong background in public safety wireless communications, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Experience with RF Coverage modeling, RF design, and optimization, • Experience with LMR site equipment configuration and test, • Experience in land mobile radio, project management skills, knowledge of database reporting tools., • Familiarity with Public Safety organization operations, • Knowledge of other wireless technologies such as TETRA, GSM, UMTS, CDMA, WiFi, LTE and embedded systems, • Knowledge of microwave, circuit based, and fiber backhaul., • Knowledge of IP-based dispatch consoles and voice recorders, • Professional level certification in Wireless Communications (e.g., ETA, CWNA, Microsoft Wireless Communications Engineering Technologies, GROL Certification), • Experience or familiarity with radio frequency devices and/or systems is highly desirable., • Experience troubleshooting public safety DAS systems including ADRF, Comba, Zinwave, etc., • Familiar with the basics of IP Networking, • Multifaceted Professional capable interfacing with customers, • Proficient in basic computer applications (MS Outlook, MS Word, MS Excel, etc.), • Ability to learn quickly and understand technical materials, • Ability to shift gears quickly as priorities change, • A solid understanding of fundamental engineering principles and the ability to effectively work on multiple engineering projects simultaneously, • Requires knowledge of radio frequency and fiber optic communication technology, • Must be able to work effectively within a diverse work force including engineers, project managers, skilled craft workers, consultants, customers, and regulatory agency personnel, • Must have strong interpersonal and communications skills to be able to effectively communicate complex issues with peers, supervisors, and managers. Must be authorized to work in the US, be willing to travel up to 50%, have a clean driving record and be able to pass a company background check., • A minimum of a bachelor’s degree, preferably in electrical engineering or similar discipline with at least 5 years Land Mobile Radio (LMR) engineering experience. Master’s degree preferred. An equivalent combination of advanced education, training, and experience will be considered.

Job DescriptionAssociate Director, Manufacturing OperationsAllendale, NJ Lynkx Staffing LLC specializes in placing talented professionals in the Biotechnology, Pharmaceutical and Medical Devices industries in New Jersey. The Associate Director, Manufacturing Operations is responsible for efficient utilization of Operations resources to meet customer demand. This role will be responsible for maintaining and overseeing the site Operations scheduling and training capacities for a time period looking ahead to the next 3-6 months. The Associate Director, Manufacturing Operations will understand upcoming needs and constraints and help drive strategy accordingly. This includes the management of all Operations scheduling, training and compliance resources. The Associate Director, Manufacturing Operations is also responsible for assessing the needs of the company to contribute to the big picture by ensuring daily operations run smoothly and as efficiently as possible. This role will also drive individual and team development to ensure a prepared and empowered workforce to become the provider of choice for the industry. • Meeting client process demands through planning, scheduling, manufacture and delivery of clinical cell therapy products according to established procedures, regulations and contracts, • Looking out 3-6 months to ensure capacity and availability of resources (room/equipment/staff) to perform clinical manufacture for processing needs, • Manages all training and compliance activities in the Operations organization, • Responsible for creating, enforcing and measuring Operator training schedules in order to ensure that all production schedules can be carried out, • Creates and maintains a process to ensure that personnel schedules are being accurately and fairly assigned to all Associates, • Supporting and driving special long-term projects and identified and assigned by the PPU Head, • Responsible for creating maintaining and communicating all Operations based KPI’s, • Ensuring department staff compliance with corporate and site-specific HR policies, safety, and business policies and practices, • Approving job specific curriculum for the training and professional development of department staff, • Responsible for streamlining the batch record review process, • Responsible to understand the profit and loss for the PPU’s as well as all related documentation, and how these items impact Operations, • Driving continuous improvement, • Liaison with support groups for short- and medium-term needs – Supply Chain, Training, Quality Systems, Quality Assurance, Quality Control, and others, • Set team expectations and goals and assists in delivering the business direction for the PPU, • Aligning departmental goals, processes and resource allocation with the organizational strategy, • Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws., • Direct reports: Associate Manager Training, Associate Manager, Compliance, Scheduling Associate, Quality Engineer Associates. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. REQUIREMENTS, • Bachelor's degree (i.e. Biology, Biotechnology, Bioengineering, Chemical Engineering)., • 5-10 years of cGMP environment, aseptic processing, mammalian cell culture, monoclonal antibody, cell processing, cryopreservation or similar experience., • 5-10 years of leadership experience or equivalent combination of experience., • Deep Understanding of cGMP and cGLP, • Working knowledge of financial operations and budget development, • Relevant IT skills (able to work with Microsoft Office and corporate scheduling system), • Competencies/Candidate Profile, • Strong collaborative and influencing skills and ability to work well in a cross-functional, matrixed environment, • Flexible and able to adapt to company growth and evolving responsibilities, • Accountability, integrity, and strong dedication to regulatory compliance, • Strong business and personnel management acumen, • Strong emotional intelligence, • Ability to think strategically and tactically (detail-oriented), • Strong analytical and problem-solving skills, • Strong written and verbal communication skills, • Drive to create and maintain order in a fluid, technically complex environment, • Continuous improvement mindset, • Ability to multi-task is essential, • Must have the ability to work in a team-oriented environment and with clients, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen.Environment requires gowning, hair net, safety glasses, gloves, and foot coverings.Must be capable of moving, sitting, stretching, stooping, using hands and fingers, reaching with hands and arms, talking and exchanging information, and vision sufficient to read materials.Duties, responsibilities, and activities may change at any time with or without notice

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Senior Project Engineer – Performs & plans commissioning of mechanical systems. Must be a self-motivated & energetic professional. Must have understanding of building mechanical systems design, construction & operation. Must have experience with commissioning process of mechanical systems ranging in size, rating and complexity. The ideal candidate shall possess theoretical and practical knowledge in the commissioning, testing and troubleshooting of mechanical systems and related controls. Candidate will be responsible for reviewing project information; executing daily field activities; maintaining project documentation; assisting the Project Manager with schedule and planning of resources, and providing guidance to Project Engineers. May perform as team lead on small to medium sized projects. Will be expected to assess and test at a high technical level. This role requires the candidate to have technical competency, organizational skills, good communication skills, and to work well in a team environment where leadership is necessary. Primary Duties/Responsibilities: • Commission mechanical, plumbing & fire alarm and suppression equipment and related controls, primarily in data center environments., • Review system designs for compliance with client facility goals., • Prepare plans and procedures for execution of the commissioning process., • Conduct commissioning activities from the design phase through the occupation phase, in accordance with client requirements and industry commissioning process best practices., • Attend factory testing of equipment and document procedures and results., • Conduct functional testing of equipment., • Perform analysis of test results using instrumentation and prepare reports., • Fully document all field procedures including results, issues and observations either via company provided templates or online applications., • Report on system performance and make technical recommendations on issues., • Work with the Project Manager and project teams to coordinate and execute field activities., • Prepare and provide input on commissioning project documentation and schedules., • Draft comprehensive test procedures for a variety of equipment and systems., • Attend relevant project coordination and schedule meetings as necessary., • May be required to lead commissioning meetings or speak on technical topics., • Assist with submitting and maintaining daily commissioning reports., • Train and guide both Associate Project Engineers and Project Engineers on roles & responsibilities., • Respond to project team and client inquiries in a professional and timely manner., • Comply with company, client, and project safety requirements., • Be knowledgeable with Mechanical, Plumbing & FLS building systems & equipment, including, but not limited to:, • Air Cooled Chiller, • Water Cooled Chiller, • Cooling Tower, • Direct Evaporative Cooling System, • Air Handling Unit, • Computer Room Air Conditioning Unit, • Process Water Plants, • Boilers, • Fuel Systems, • Backup generators, • Gas turbines, • Reciprocating engines, • Steam turbines, • Selective catalytic reduction systems, • Fan Coil Unit, • DX Split System, • Fan Array, • Chemical Injection System, • Variable Frequency Drive, • Variable Refrigerant Volume System, • Rooftop Unit, • Variable Air Volume Unit, • Makeup Air Unit, • Hydronic Pump, • Leak Detection, • Heat Trace, • DDC & PLC Controls, • Fire Pumps & Controller, • Pre‐Action Fire Suppression System, • Fire Alarm Control Panel, • VESDA System, • Travel nationwide 50% - 75% if not assigned locally; may have periods of higher travel expectation., • Hybrid Work Environment.Qualifications Education/Experience/Background: • Minimum of 7 or more years of experience in commissioning with mission critical project experience, or relevant and applicable mechanical and/or controls experience., • Organized, detail-oriented, analytical, proactive, problem solver., • Good communication and relationship skills., • Effective written and verbal communication skills., • Ability to manage multiple tasks simultaneously, work with limited supervision and manage junior engineers on day-to-day tasks., • Knowledge & experience with ASHRAE or BCxA commissioning guidelines preferred., • Distributed control system experience a plus., • Good understanding of building management systems (BMS) and/or electrical power monitoring system (EPMS)., • Deep understanding and application of test instrumentation., • Team player and a “client-first” mentality., • Ability to walk up to 5 miles per day., • Carry up to 50 lbs., • Ability to wear required PPE daily. Additional Information Pay Range: $120000 to $140000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionAbout Weee! Weee! is the largest and fastest-growing ethnic e-grocer in the United States, operating in one of the largest underserved categories in retail with affordable access to exciting ethnic food. By partnering with local suppliers, redesigning the value chain and leveraging social buying, Weee! is reshaping the grocery business entirely. You can read more about us on Business Insider, Reuters and TechCrunch. Weee! is headquartered in Fremont, CA, and is currently available coast to coast with exceptional growth (5x YoY) across geographies, categories and ethnicities. We have raised $800M+ in funding to date from leading investors including Softbank Vision Funds, DST, Blackstone, Tiger Global, Lightspeed Ventures, Goodwater Capital, XVC and iFly. The opportunity now is to join a rocketship as we prepare for the next stage of growth, and an eventual public listing. This role is onsite 5 days a week in Clifton, NJ About the Role As a Field Process Engineer II at Weee, you will drive strategic initiatives to optimize operational processes, enhance efficiency, and deliver world-class customer experiences. Building on foundational expertise, this role demands advanced analytical capabilities, independent project ownership, and the ability to influence cross-functional stakeholders to deliver scalable, high-impact solutions in a rapidly evolving environment. Responsibilities • Lead medium-complexity cross-functional projects focused on operational excellence and process improvement., • Partner with Central PE to identify and track operational metrics., • Collaborate with Operations, Supply Chain, and PE teams to implement solutions that improve workflow efficiency and reduce costs., • Identify and address more complex root causes in current processes, create corrective action plans to achieve operational goals and ensure alignment with operational standards., • Help implement solutions and provide training to address operational challenges., • Analyze data to identify trends, root causes, and opportunities for system and process improvement., • Collaborate with the Central PE team to develop and maintain the standard operating procedures (SOPs) and work instructions., • Support Central PE team on system updates and Warehouse Management System new feature launches, • Proactively mitigate safety risks within the production process, ensuring adherence to safety protocols., • Conduct Gamba Walk and SOP audit, drive continuous improvement initiatives to reduce waste/cost, increase efficiency and improve quality, • Act as a mentor to provide guidance, training, and technical support to junior PEs, • Support warehouse daily operations as needed including 5S maintenance, equipment forecasting and management, • Bachelor's degree in Business, Operations, Supply Chain, Engineering, or equivalent experience working as a continuous improvement engineer, • 3+ years of experience in Warehousing Operations, Manufacturing, E-commerce, Fulfillment, Automation with a proven track record of leading multi-phase projects., • Strong analytical skills with experience in data analysis tools, e.g. Advanced Excel. SQL and Tableau are preferred., • Excellent communication and leadership skills including the ability to articulate strategic recommendations to senior leaders and influence decision-making., • Experience in risk management, managing budgets, labor planning or resource allocation in a project, • Experience in scaling operations within high-growth or tech-driven environments., • Knowledge of ERP systems and WMS systems., • Demonstrated ability to balance strategic thinking with hands-on execution in ambiguous scenarios., • Certifications such as PMP, Six Sigma Green Belt, or Lean Management are highly desirable., • Comprehensive health insurance package, including medical, dental, and vision. PPO/HMO packages, • 401k, 4% company match, • Equity and Bonus, • Vacation, sick and holiday time off, • Monthly mobile stipend, • The US base salary range for this full-time position is $75,000 - $90,000, • This role may be eligible to discretionary bonus, incentives and benefits Please note that the compensation details listed in US role postings reflect the base salary only, and do not include any variable compensation elements. Weee! is an equal opportunity employer welcoming all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other basis prohibited by law. Discrimination or harassment of any kind is not tolerated at Weee!. If you need to inquire about an accommodation or need assistance with completing the application, please email us at . For more jobs and to find out more about Weee!, visit our career page: Softbank Vision Funds

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated manufacturing engineers to join its rapidly growing team. The Manufacturing Engineering role will develop and implement processes, tooling, and equipment necessary to manufacture and test high temperature superconducting (“HTS”) magnets. This role will also help establish the foundations of Process Engineering and Quality Engineering at Thea Energy as we build and commission a magnet manufacturing and test facility. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibilities: • Generate documentation for the manufacture of HTS magnets, including processes and procedures, work instructions, and quality criteria, • Design, build, and commission magnet manufacturing tooling and equipment, • Work iteratively with magnet engineers to incorporate design for manufacture and lessons learned, • Develop and implement virtual and physical inventory management and manufacturing BOMs, • Generate specifications for and collaborate with vendors to procure hardware that meets quality specifications, • Define roles for and coordinate onboarding of manufacturing technicians, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersQualifications:, • Experience with first encounters of complex hardware assemblies, • Experience scaling from first-of-a-kind to continuous production, • Experience generating and interpreting manufacturing drawings, particularly GD&T, • Experience with fusion processes, including soldering, brazing, and welding, • Experience with planning and execution software including PLM, MRP, and inventory management, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in mechanical engineering, manufacturing engineer, or related field, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $100,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionDescription: Department: Engineering Reports To: General Manager / Chief Engineer Status: Non-Exempt Job Summary The Preventative Maintenance Engineer is responsible for ensuring that all hotel systems, equipment, and guest rooms are maintained in excellent working order through proactive and scheduled maintenance. This position plays a key role in minimizing downtime, improving guest satisfaction, and maintaining compliance with brand and safety standards. The Preventative Maintenance Engineer will execute daily, weekly, and monthly maintenance programs, complete room and system inspections, and document all findings and repairs. The role also includes responding to guest maintenance requests, assisting with minor repairs, and supporting the Chief Engineer in maintaining the overall facility in top operational condition. Qualification Standards Education & Experience • High school diploma or equivalent required., • Minimum 2 years of general maintenance or engineering experience; hotel experience strongly preferred., • Trade license or certification (HVAC, electrical, plumbing, or carpentry) preferred., • Valid driver’s license required with acceptable driving record. Physical Requirements • Long hours may be required., • Must be able to exert up to 100 pounds of force occasionally, 50 pounds frequently, and 20 pounds constantly., • Ability to stand, walk, climb, kneel, and work in tight spaces throughout the shift. Mental Requirements • Must be detail-oriented, organized, and able to follow preventative maintenance schedules precisely., • Must be effective in problem-solving, anticipating and preventing issues before they impact the guest experience., • Must remain calm and professional under pressure., • Strong communication and documentation skills required.Requirements: Duties & Responsibilities Essential Functions • Conduct scheduled preventative maintenance for guest rooms, public spaces, and building systems in accordance with Avion Hospitality and Hyatt Place standards., • Inspect and maintain HVAC, electrical, plumbing, laundry, kitchen, and pool equipment to ensure proper operation., • Complete assigned PM checklists for guestrooms, including minor repairs such as caulking, touch-up paint, fixture adjustments, furniture maintenance, and appliance testing., • Maintain accurate maintenance logs, inspection records, and work order documentation., • Identify and report potential safety hazards or maintenance deficiencies; assist in correcting issues promptly., • Respond to guest service requests and work orders quickly and courteously to minimize inconvenience., • Monitor and record chemical levels and operational status of pool and spa to ensure compliance with health codes., • Assist in maintaining compliance with fire safety, energy conservation, and OSHA standards., • Participate in hotel safety meetings and training sessions as required., • Ensure all work is performed safely, efficiently, and to brand quality standards. Additional Responsibilities • Support property inspections and quality assurance audits., • Assist with snow removal, landscaping, and exterior maintenance as needed., • Maintain tool inventory and ensure proper use of equipment., • Proactive Problem Solving: Anticipates maintenance needs before breakdowns occur., • Guest Focus: Ensures all work supports the comfort, safety, and satisfaction of hotel guests., • Reliability: Consistently follows schedules, checklists, and reporting procedures.

Job Description Residence Inn by Marriott-Wayne, 30 Nevins Road, Wayne, NJ 07470 We are currently looking for an experienced Chief Engineer to join our Team! Our Residence Inn® by Marriott in Wayne, with 118 full suites, is nestled in a peaceful corner of northern New Jersey. When our guests visit William Paterson University or attend a wedding at The Brownstone or The Tides Estate, there’s no closer hotel. Ice . We are an extended stay hotel, and our suites have full kitchens including a fridge, microwave, and utensils. A great place to stay, a great place to work. The Residence Inn is one of the 50 hotel properties owned and managed by the award-winning hotel management company, Buffalo Lodging Associates. Buffalo Lodging Associates, a hotel management company based out of Canton, MA has put an emphasis on true hospitality since being founded in 1996. While building an extensive portfolio of 50 hotels, we’ve partnered with the most respected hotel brands in the business including Marriott International, Hilton Worldwide, InterContinental Hotels Group, Choice Hotel International and Radisson Hotels. The core and heart of our company lies within our dedicated associates, for we wouldn’t be an award-winning company without each and every one of them. A GROWING HOTEL MANAGEMENT COMPANY – COME JOIN US! We value our associates with competitive compensation plans and other benefits and perks. Some of these benefits include: • Weekly pay, • Paid vacation, sick days and holidays, • Medical, dental, vision insurance, • 401K Retirement plan with company match, • Travel discounts on our branded properties The Chief Engineer takes ownership and pride in the maintenance of the property, while fostering the Buffalo Lodging Associates (BLA) culture and values- Excellence, Passion, Integrity, Inclusive. Responsibilities include: • Creating a safe and appealing property by completing routine preventative maintenance on laundry equipment, heating and air conditioning units, ice machines, fire extinguisher, fire and smoke alarms, lawn sprinkler, lawn equipment, exercise equipment and plumbing, • Maintaining work order assignment boards and tracking completed/pending work orders I and following up on all incomplete work orders to inform the requesting guest or department of the status., • Evaluating and selecting quality vendors that are reliable and provide good value for their price, • At least three years of supervisory or lead mechanic experience in a hotel or related field, • Demonstrated general mechanical skills are necessary, • Basic repair, painting, wall covering HVAC, electrical work, plumbing, boiler operation, pool maintenance and general maintenance skills required, • Vocational training is preferred but not required

Job Description Senior Electrical Engineer – AEC Industry Location: Hybrid | Midland Park, NJ or Goshen, NY Compensation: $115,000 – $160,000/year (commensurate with experience) Job Type: Full-time | W-2 | With Comprehensive Benefits Hybrid Schedule: 3 days onsite / 2 days remote (after 90-day in-office onboarding) Join LAN Associates: Award-Winning AEC Firm with 60 Years of Excellence! LAN Associates, Engineering, Planning, Architecture, Surveying, Inc. (LAN) is a top-rated, mid-sized, multi-disciplinary architecture and engineering (AEC) firm with a 60-year legacy in delivering high-impact building design solutions across commercial, educational, healthcare, hospitality, residential, and institutional markets. We are actively seeking a Senior Electrical Engineer to join our growing electrical engineering team. This role offers the opportunity to work on diverse, complex building projects while leading junior team members and collaborating with a multi-disciplinary project team. Key Responsibilities – Senior Electrical Engineer: * Lead, mentor, and develop junior electrical engineering staff * Plan, design, and coordinate electrical systems for various building projects in compliance with NEC, NFPA, IEEE, and other codes * Perform and review electrical calculations, including load calculations, voltage drop, short-circuit analysis, and equipment sizing * Prepare technical reports, specifications, and permit applications * Conduct quality assurance reviews of electrical design work and ensure accuracy of construction documents * Collaborate with architects, engineers, consultants, and clients throughout the project lifecycle * Participate in project meetings, including design reviews and construction coordination * Support construction administration including RFI responses, submittal reviews, and site visits * Contribute to proposal development and business development initiatives * Ensure project budgets, timelines, and scope are maintained Minimum Qualifications: * 7+ years of electrical engineering experience in the Architecture, Engineering, and Construction (AEC) industry * Bachelor’s degree in Electrical Engineering * PE license (preferred) or EIT with a path toward licensure (NY and NJ preferred) * Strong proficiency in AutoCAD; Revit experience a plus * In-depth knowledge of NEC, NFPA, IEEE, ANSI standards, and applicable building codes * Proven ability to read and interpret construction documents * Demonstrated experience in client-facing roles * Previous leadership or mentorship of junior engineers * Proficiency in Microsoft Excel and Word; load calculation software experience preferred * Valid driver’s license; willingness to travel locally (Tri-State area) up to 20% Preferred Qualifications: * 10+ years of experience in building electrical system design * Experience with electrical power analysis software (e.g., SKM, ETAP) * Revit proficiency for MEP systems coordination * Prior experience at a full-service architecture and engineering firm Why LAN Associates? LAN offers one of the best benefits packages in the AEC industry, designed to support your career growth and personal well-being: * Competitive salary + company performance bonuses * Employee-owned company | Stock options after 6 months * 100% company-paid Health, Dental & Vision Insurance (employee + family) * 401(k) with 3-5% company profit-sharing contribution * 15+ PTO days annually (increases with tenure) * 9 Paid Holidays + 1 Floating Holiday * Employer-paid Life Insurance, Disability, EAP & Wellness Programs * Continuing Education & Professional Development reimbursement * Mentorship, resource groups & internal leadership development * Pet insurance, voluntary benefits, and more! About LAN Associates: With over 130 professionals across offices in New Jersey, New York, and Pennsylvania, LAN delivers over $250 million in construction value annually. Our portfolio includes award-winning projects like The Vista at Christian Health, The Empty Sky 9/11 Memorial, and The Four Seasons Hotel expansions. We serve diverse markets including: * K-12 and Higher Education * Healthcare & Senior Living * Commercial & Mixed-Use * Hospitality * Government & Municipal Facilities * Faith-based & Nonprofits Our Core Values: Loyalty | Honesty & Integrity | Responsiveness | Innovation | Company Pride Alternate titles: Electrical Project Engineer | Electrical Design Engineer | Lead Electrical Engineer | Principal Electrical Engineer | MEP Engineer We are proud to be an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Senior Electrical Engineer – AEC Industry Location: Hybrid | Midland Park, NJ or Goshen, NY Compensation: $115,000 – $160,000/year (commensurate with experience) Job Type: Full-time | W-2 | With Comprehensive Benefits Hybrid Schedule: 3 days onsite / 2 days remote (after 90-day in-office onboarding) Join LAN Associates: Award-Winning AEC Firm with 60 Years of Excellence! LAN Associates, Engineering, Planning, Architecture, Surveying, Inc. (LAN) is a top-rated, mid-sized, multi-disciplinary architecture and engineering (AEC) firm with a 60-year legacy in delivering high-impact building design solutions across commercial, educational, healthcare, hospitality, residential, and institutional markets. We are actively seeking a Senior Electrical Engineer to join our growing electrical engineering team. This role offers the opportunity to work on diverse, complex building projects while leading junior team members and collaborating with a multi-disciplinary project team. Key Responsibilities – Senior Electrical Engineer: * Lead, mentor, and develop junior electrical engineering staff * Plan, design, and coordinate electrical systems for various building projects in compliance with NEC, NFPA, IEEE, and other codes * Perform and review electrical calculations, including load calculations, voltage drop, short-circuit analysis, and equipment sizing * Prepare technical reports, specifications, and permit applications * Conduct quality assurance reviews of electrical design work and ensure accuracy of construction documents * Collaborate with architects, engineers, consultants, and clients throughout the project lifecycle * Participate in project meetings, including design reviews and construction coordination * Support construction administration including RFI responses, submittal reviews, and site visits * Contribute to proposal development and business development initiatives * Ensure project budgets, timelines, and scope are maintained Minimum Qualifications: * 7+ years of electrical engineering experience in the Architecture, Engineering, and Construction (AEC) industry * Bachelor’s degree in Electrical Engineering * PE license (preferred) or EIT with a path toward licensure (NY and NJ preferred) * Strong proficiency in AutoCAD; Revit experience a plus * In-depth knowledge of NEC, NFPA, IEEE, ANSI standards, and applicable building codes * Proven ability to read and interpret construction documents * Demonstrated experience in client-facing roles * Previous leadership or mentorship of junior engineers * Proficiency in Microsoft Excel and Word; load calculation software experience preferred * Valid driver’s license; willingness to travel locally (Tri-State area) up to 20% Preferred Qualifications: * 10+ years of experience in building electrical system design * Experience with electrical power analysis software (e.g., SKM, ETAP) * Revit proficiency for MEP systems coordination * Prior experience at a full-service architecture and engineering firm Why LAN Associates? LAN offers one of the best benefits packages in the AEC industry, designed to support your career growth and personal well-being: * Competitive salary + company performance bonuses * Employee-owned company | Stock options after 6 months * 100% company-paid Health, Dental & Vision Insurance (employee + family) * 401(k) with 3-5% company profit-sharing contribution * 15+ PTO days annually (increases with tenure) * 9 Paid Holidays + 1 Floating Holiday * Employer-paid Life Insurance, Disability, EAP & Wellness Programs * Continuing Education & Professional Development reimbursement * Mentorship, resource groups & internal leadership development * Pet insurance, voluntary benefits, and more! About LAN Associates: With over 130 professionals across offices in New Jersey, New York, and Pennsylvania, LAN delivers over $250 million in construction value annually. Our portfolio includes award-winning projects like The Vista at Christian Health, The Empty Sky 9/11 Memorial, and The Four Seasons Hotel expansions. We serve diverse markets including: * K-12 and Higher Education * Healthcare & Senior Living * Commercial & Mixed-Use * Hospitality * Government & Municipal Facilities * Faith-based & Nonprofits Our Core Values: Loyalty | Honesty & Integrity | Responsiveness | Innovation | Company Pride Alternate titles: Electrical Project Engineer | Electrical Design Engineer | Lead Electrical Engineer | Principal Electrical Engineer | MEP Engineer We are proud to be an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description 2024 was a Record Sales Year. Our Largest Sales Growth in Decades. 2025 is trending to be even better. Technical Sales Territory Manager for a Paterson, New Jersey based territory. Sell boiler and cooling tower water treatment chemicals with unlimited commission potential. Work out of your home in Paterson, Clifton, Newark or the surrounding area. Garratt-Callahan is a profitable and private nationwide water treatment chemical company that promotes from within. We are one of the largest private water treatment companies in the U.S. We are stable, and well respected in our industry. G-C is expanding nationwide, and we are looking for aggressive, smart, educated, and promotable Technical Sales Territory Managers to join our sales team. We offer training, technical support, and an unlimited no-cap flat rate commission. Sell water treatment boiler and cooling tower chemicals to a variety of industrial customers in a New Jersey based territory. Maintain the existing customer base and make cold calls to develop new business. Work alongside friendly, veteran salespeople. Garratt-Callahan is proud to offer: Compensation is based upon experience and the ability to succeed. $90,000 to $130,000+ first year for a qualified candidate. Great benefits including a corporate 401k, health, dental, vision, and life insurance. Industry competitive no cap flat rate commission plan. And we have not changed our commission plan in 25 years. Our top Territory Sales Managers make six figure commissions—on top of their salaries. Yes, you read that right. Unlimited commission, no cap. Expenses, and a Car Allowance of $675 per month. Technical Support and Ongoing Training. Stability and peace of mind. No layoffs in our 120-year history. Debt free, profitable, and growing. Join the winning team. Our 2024 sales were at all-time record levels. And 2025 sales are trending to finish at another record. We are essential providers to food processors, data centers, government, manufacturers, commercial & institutional, and over 2000 hospitals. To Apply, please log on to: Garratt-Callahan is an EEO/AAE employer. Minorities, women, veterans, and individuals with disabilities are encouraged to apply. You may live anywhere within Paterson, Clifton, Newark, or the surrounding area of Northern New Jersey. Thank you for considering the Garratt-Callahan Company. We also have multiple sales openings nationwide. Please visit the career section of our website: You must have at least a four technical degree to qualify for this position. Advanced degrees preferred. Military equivalent, such as Navy Nuclear Propulsion, or Army CBRN School, is also great. Requirements: You will be a successful applicant if you have a technical degree such as Chemistry, Chemical Engineering, Environmental Science, Biology or Mechanical Engineering. A minimum of one-year technical sales related to water treatment chemicals is required. Selling to a variety of industrial customers is preferred. Knowledge of the New Jersey industrial marketplace is preferred. NOTE: Garratt-Callahan does not sponsor work visas. No recruiters please. If you have a disability, and need assistance during the application and selection process as a result, please contact the Garratt-Callahan Human Resources department at 650.697.5811. Arrangements can be made to provide an accommodation in order to assist you in applying for an open position using our on-line system, completing any other related paperwork, interviewing, or any other portion of the employment process. This phone line is only for disability assistance. When requesting an accommodation, please provide your name, phone, email address, or any other means of contacting you. Provide a brief description of the nature of the requested accommodation. A member of the Human Resources team will then contact you to discuss your request. A request for an accommodation will not affect your opportunities for employment with Garratt-Callahan. Garratt-Callahan values differing experiences, backgrounds and perspectives among our employees, and see them as a competitive advantage. Garratt-Callahan is committed to the fair and equal treatment of all associates and applicants. Garratt-Callahan is an equal opportunity employer that evaluates qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Key Words: Chemistry, chemicals, scientific, science, salesperson, salesman, saleswoman, outside sales, technical sales, account representative, account executive, territory sales, territory manager, district sales, district manager, field engineer, field service, AE, sales engineer, chemical engineer, chemist, mechanical engineer, biologist, biology, microbiology, nalco, ecolab, us water, ge water, chemtreat, drew industrial, Barclay, solenis, kurita, chem-aqua, suez, Evoqua, water treatment, boilers, cooling towers, waste water, pumps, equipment, chillers, polymers, biocides.

Job DescriptionPOSITION SUMMARY: The Municipal Engineer is a professional with 7+ years of experience. This individual will design, manage and/or represent a variety of infrastructure projects (owned by municipalities and local school districts). PRIMARY DUTIES: • Responsible to act as the client manager to one or more municipalities or other public agencies. The client manager will act as the single point of contact between the firm and the client. He/she will supervise and coordinate all projects performed in the firm on behalf of the client, to the client’s satisfaction., • Develop or implement engineering solutions to assist clients with improving and maintaining their infrastructure., • Design transportation, utility, facility, or hydraulic systems or structures (as appropriate) using computer assisted design or drawing tools., • Compute load and grade requirements, water flow rates, or material stress factors to determine design specifications., • Estimate quantities and cost of materials, equipment, or labor to determine project feasibility., • Analyze survey reports, maps, drawings, blueprints, aerial photography, or other topographical or geologic data., • Conduct studies of traffic patterns or environmental conditions to identify engineering problems and assess potential project impact., • Perform all design activities ensuring compliance with environmental, safety, or other governmental regulations., • Identify environmental risks and develop risk management strategies for projects., • Attending regularly scheduled public meetings (conducted by Municipal clients) in the capacity of Municipal Engineer, or Land Use Board Engineer. Prepare and present public reports on topics such as bid proposals, project status reports and developmental review projects., • Provide technical advice to clients regarding design, construction, or capital program modifications., • Support of the field activities of our construction inspection staff, including providing timely data, shop drawing review, and client coordination. KNOWLEDGE, SKILLS and ABILITIES: • Municipal Engineering experience preferred but not required., • Strong oral and written communication skills, • Ability to make public presentations., • Ability to define problems, collect data, establish facts and draw conclusions to present to co-workers and clients., • Strong organizational skills and attention to detail, • Knowledge of computer aided design software., • Ability to work in groups as well as individually.EDUCATION/EXPERIENCE:, • Bachelors of Science Degree in Civil Engineering from an accredited four-year college or university CERTIFICATIONS/LICENSES REQUIRED • PE License Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasionally lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job Description RF Field Engineer Location: Clifton, NJ C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C2 Systems is currently seeking a Radio Frequency (RF)/Field Engineer to join our team. If you are highly motivated and have the ability to work in a fast paced environment, this may be the role for you. You will be interacting with customers and co-workers on a daily basis and providing timely and detailed updates. This position will require you to be in the field 90% of the time. Primary Responsibilities: • Takes the lead on system commissioning, integrations, and activations, • Performs system tests using scanners, spectrum analyzers, transmitters, and other electronic test equipment, • Performs site surveys and in-depth walkthroughs, • Works (hands on) with system components such as antennas, fiber optics, coax, and RF amplifiers, • Troubleshoots and repairs systems for optimal performance, • Application of RF principles/theory (signal path, power, frequency, noise, modulations, etc.), • Multi-tasks on projects on a day-to-day basis, • Maintains test equipment and tools for continuous use, • Travels to various job sites within Maryland and outlying regions (DC, Northern Virginia, Pennsylvania and Delaware) Skills/Qualifications: • 2 year college degree (preferably technical) with relevant coursework, • 2+ years of related experience preferred (previous experience with DAS architecture and other cellular systems), • Knowledge of various wireless technologies (CDMA, WCDMA, GSM, LTE, etc.), • Possess strong technical aptitude and the desire to learn and advance within a technical field, • Comfortable working in high pressure situations, • Ability to receive and give direction on an as needed basis, • Knowledge of RF optimization techniques and best practices, • Proficient in basic computer applications (MS Office, etc.), • Must have a valid driver’s license with reliable transportation In addition, you should have the following characteristics: • Self-motivated and have the ability to work effectively under minimal supervision and direction, • Ability to work in groups, • Passion for learning new technologies, • Ability to work in a fast-paced environment, • Strong written and verbal English communication skills

Job Description Our client in Fairfield, NJ is looking for an onsite, direct hire Manufacturing Industrial Engineer. Pay: $120k-$130k The ideal candidate will have an engineering background in mechanical engineering, industrial engineering, systems engineering, value engineering, or related engineering field with concentrated technical knowledge and previous experience in precision metals and plastics manufacturing and/or complex finished device assemblies. Responsibilities: • This role is fundamentally based on long-standing best practices in industrial engineering principles: identifying waste, defining value streams, productivity optimization, kanban setups, takt time studies, labor tracking, ergonomics, material flow, pFMEA, and similar Lean Six Sigma tools., • Support new business development with the purpose of generating accurate and detailed costing proposals that exceed customer expectations for quality, price, and delivery., • Bachelor's degree in Engineering (Mechanical, Industrial engineering, Systems engineering, Value engineering), • Minimum of 5 years of experience in value engineering, industrial engineering, manufacturing costing, or related role in the manufacturing industry, with specific experience utilizing industry 4.0 best practices and/or Lean, • Experience working for a Contract Manufacturer or OEM, • Strong engineering background with a solid understanding of manufacturing processes, materials, and equipment, • Ability to identify the best possible manufacturing processes, • Proficiency in using SolidWorks or equipment CAD/CAM software packages for estimating and DFM purposes, • Experience in product level design for manufacture (DFM), • Ability to collaborate across engineering Centers of Excellence for multi-plant vertically integrated proposals, • Excellent analytical and problem-solving skills, • Strong attention to detail and accuracy, • Effective communication and interpersonal skills, • Ability to work independently and as part of a cross-functional team, • Knowledge of industry standards and best practices in cost estimation

Job Description Who we are! Vanderweil Engineers is a top ranked national full-service engineering firm specializing in MEP/FP, and technology services. Working in multiple sectors including Science & Technology, Mission Critical, Academic, Healthcare and Commercial buildings. In our 75th year in operation with a staff of 500+ located across nine offices, we are proud to be one of the leading independently owned engineering firms in the country. If you are looking for an opportunity to grow your career with some of the best minds in the industry, we are looking for you. We offer growth and stability in an ever-changing volatile environment. We are looking for a Senior HVAC Design Engineer with specialized expertise in Science & Technology and/or Healthcare projects to sit in either our Newark office or in NYC. This position offers a unique opportunity to contribute to complex, high-performance facilities while mentoring junior engineers and shaping project outcomes. Some of your responsibilities include the following: • Lead HVAC system design for large-scale projects across Science & Technology, Healthcare, Academic, and Commercial sectors., • Establish system design criteria and perform engineering calculations (e.g., load, airflow, pressure drop)., • Oversee the preparation of design documentation including drawings, specifications, and equipment schedules., • Coordinate and supervise the technical work of design teams, ensuring adherence to quality and performance standards., • Conduct field investigations and site assessments as necessary during design and construction phases., • Interface with clients, architects, contractors, and internal stakeholders throughout the project lifecycle., • Provide mentorship and technical guidance to junior engineers and designers., • Lead QA/QC reviews of HVAC deliverables., • Utilize and provide direction for BIM/Revit modeling and documentation processes. Essential Skills & Requirements: • 10 + years of experience designing HVAC systems in high performance facilities., • P.E. Preferred, • Bachelor of Science degree in Mechanical Engineering or equivalent experience, • Strong understanding of HVAC system types, central plant design, air handling units, hydronic systems, and controls., • Proficiency in relevant engineering software (e.g., Revit, AutoCAD, Trane Trace, or HAP)., • Demonstrated experience leading HVAC design teams and coordinating interdisciplinary projects., • Excellent written and verbal communication skills., • Knowledge of applicable building codes, ASHRAE standards, and energy codes., • Commitment to sustainable design; LEED accreditation preferred. Our Work Culture: We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. Our wellness programs prioritize our team members’ physical and behavioral health. We are an equal opportunity employer committed to diversity in the workplace. This position could sit in Newark or NYC office and has a salary range of $120,000 to $170,000, inclusive of base salary and performance-based incentives. The range is dependent on your years of experience, FE/PE licensure, skill sets and education and is negotiable. In addition, we offer 401K company match, flexible work schedule, benefits and wellness program. Reach out to us to discuss total rewards and compensation package.

POSITION SUMMARY: Remington & Vernick Engineers is looking for a NICET Certified Professional (or equivalent) with expertise in inspecting heavy highway, intersection improvements, and bridge rehabilitation/reconstruction projects. This professional will assist in the project record keeping, measuring and tracking daily quantities as constructed, and generating daily inspection reports. This individual is expected to have an extensive background in construction inspection with clients such as local County government agencies, NJDOT, the NJTA, DRPA, and DRJTBC. PRIMARY DUTIES: • Act in the capacity of Lead Inspector to conduct construction supervision and field inspection of the work in progress to determine if the work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Work collaboratively with other engineers, professionals, and infrastructure authorities on Federal, State, regional, and local improvement projects., • Work with clients to inform the public about upcoming work and potential impacts. Work with the contractor to minimize disruptions to the public., • Provide and maintain all records related to the project in question including daily quantities., • Possess strong communication, computer, and writing skills and be experienced with the review and comprehension of CPM Schedules, • Support the Project Manager / Resident Engineer with all project submittals and requests for information, ensuring the proper Engineer performs the necessary review and/or guidance., • Keep a logbook of all observations and daily activities for ongoing work and provide the client with daily reports to include all labor trades, equipment supplied by Contractor, and measured pay quantities., • Review applications for payment with Contractor and make recommendations for progress payments to the Client., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Perform additional responsibilities as required by project and business needs. KNOWLEDGE, SKILLS and ABILITIES: • Good communication skills, with the ability to work with others and the public., • Self-motivated, organized, and focused, with good attention to detail. EDUCATION/EXPERIENCE: • High School diploma or equivalent, • Minimum of 5 years of experience with 2+ years of experience on projects $5M or greater, • Experienced on bridge, and highway construction projects, • Must be familiar with NJDOT specifications and documentation practices., • Possess a combination of NJ County, NJDOT, NJTA, DPRA, and DRJTBC experience Certifications/Licenses Required • Valid Driver’s License, • NICET 2+ Highway Construction Inspection or equivalent required, • ACI-Concrete Field Testing Technician, • NJSAT Asphalt Paving Construction Technologist, • Rutgers TCC certification SUPERVISORY RESPONSIBILITY This position has some supervisory responsibility. PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee works primarily in the field and may be exposed to outside weather conditions. Work requires full range of motion and ambulation, climbing ladders or crawling in tight spaces. Requires technology and computer use to file project, time, and expense reports. May occasionally require lifting up to 25 pounds. Travel to worksites and regional offices worksites will be required. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $68,000 - $102,000. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. We are an at will employer.

Job Summary: We are seeking a highly experienced and innovative Senior Mechanical Engineer to drive the development of advanced electro-pneumatic and mechanical systems. The ideal candidate will apply deep mechanical engineering expertise, lead complex design and re-design projects, and provide technical guidance to cross-functional teams and junior engineers. Key Responsibilities: Apply subject matter expertise in mechanical design, analysis, and system development. Conceive and implement solutions to complex pneumatic, mechanical, and electrical design challenges. Establish design objectives and contribute to writing specifications and comprehensive engineering reports. Review and develop detailed product specifications. Conduct conceptual and detailed design studies using MCAD, SolidWorks, and other engineering tools. Collaborate with multidisciplinary teams throughout the design and development process. Develop prototype hardware in coordination with internal manufacturing and external vendors. Conduct rigorous testing to verify compliance with performance, safety, regulatory, and environmental requirements. Apply Design for Manufacturability and Assembly (DFM&A) principles to product designs. Generate and maintain detailed engineering documentation supporting the product development lifecycle. Serve as a technical mentor and project lead, providing guidance to junior engineers and managing small to medium-sized projects. Technical Expertise / Skills: Advanced proficiency in SolidWorks CAD, MCAD/CAE tools, Microsoft Office Suite, Microsoft Visio, Microsoft Project, and Adobe Acrobat. Strong background in materials and manufacturing methods, including: Injection molding Plastic extrusion Metal casting, stamping, and machining Additive manufacturing Familiarity with ANSI/ISO dimensioning and drafting standards, including GD&T. Experience with mechanical testing, measurement equipment, and statistical analysis of test data. Understanding of regulatory requirements and document control systems, especially within medical device environments. Knowledge of FDA, IEC, and UL standards for medical electronic equipment. Capable of thermal, structural, and vibration analysis. Skilled in mechanism design, analytical reasoning, and creative problem-solving. Ability to operate lab and shop equipment (e.g., drill press, lathe, milling machine, oscilloscopes, DVMs, environmental chambers). Experience with database and document management systems. Minimum Qualifications: BSME or MSME required. Minimum of 10 years of progressive experience in mechanical design and product development. Proven experience leading technical sub-projects and mentoring engineers. Strong interpersonal, verbal, and written communication skills.

Job Summary: We are seeking a highly experienced and innovative Senior Mechanical Engineer to contribute to the development of advanced electropneumatic and mechanical systems. The ideal candidate will apply indepth knowledge of mechanical engineering principles, demonstrate leadership in complex design/redesign projects, and provide technical guidance to crossfunctional teams and junior engineers. Key Responsibilities: • Apply subject matter expertise in mechanical design, analysis, and system development., • Conceive and develop solutions to complex analytical, pneumatic, mechanical, and electrical design challenges., • Establish design objectives and contribute to writing specifications and comprehensive engineering reports., • Participate in the review and development of detailed product specifications., • Conduct conceptual and detailed design studies using MCAD, Solidworks, and other tools., • Collaborate with multidisciplinary engineering teams throughout the design and development process., • Develop prototype hardware in coordination with internal manufacturing and external vendors., • Conduct rigorous testing to verify compliance with performance, safety, regulatory, and environmental requirements., • Generate and maintain detailed engineering documentation to support the product development lifecycle., • Serve as a technical mentor and project lead, providing guidance and support to junior engineers and managing small to medium sized projects. Required Knowledge, Skills, and Abilities: • Expertise in Design for Manufacturability and Assembly (DFM&A) principles., • Proficient in SolidWorks CAD software; formal training preferred., • Strong background in materials and manufacturing methods including:, • Injection molding, • Plastic extrusion, • Metal casting, stamping, and machining, • Additive manufacturing, • Familiarity with ANSI/ISO dimensioning and drafting standards and GD&T., • Experience with mechanical testing and measurement equipment, and statistical analysis of test data., • Understanding of regulatory requirements and document control systems (especially within medical device environments)., • Experience in applying FDA, IEC, and UL standards for medical electronic equipment., • Capable of thermal, structural, and vibration analysis., • Demonstrated skill in mechanism design, analytical reasoning, and creative problem solving., • Strong interpersonal, verbal, and written communication skills., • Ability to operate lab and shop equipment (e.g., drill press, lathe, milling machine, oscilloscopes, DVMs, environmental chambers). Minimum Qualifications: • BSME or MSME required., • Minimum of 10 years of progressive experience in mechanical design and product development., • Proven experience leading technical subprojects and mentoring engineers., • Advanced proficiency with: SolidWorks, MCAD/CAE tools, Microsoft Office Suite, Microsoft Visio and Project, Adobe Acrobat, • Experience with database and document management systems.