Equipment engineer jobs in Garden City, New YorkCreate job alerts

Job Description: • Provide dedicated on-site IT/OT support, ensuring seamless operations, rapid incident resolution, and proactive maintenance at sites. Act as the primary point of contact for all local IT/OT issues and coordinate with remote teams for escalations. Responsibilities :- Incident Management & Resolution: • Act as Site SPOC for critical incidents (P1/P2) and coordinate with the Critical Incident Manager., • Perform triage and assignment of site alerts/incidents., • Provide hands-and-eyes support for break-fix issues that cannot be resolved remotely., • Adhering to SLAs agreed in the Scope, • ITIL Processes awareness and adhering to ITIL process workflow. Site Operations & Preventive Maintenance: • Conduct daily site walkthroughs and routine checks., • Maintain site-specific knowledge base and update manuals., • Performs routine maintenance and preventive checks to ensure the health of critical IT systems, • Assist in planned change management activities requiring on-site presence. Collaboration & Communication: • Bridge between L2/L3 support teams and business stakeholders., • Engage and escalate IT issues impacting business operations., • Coordinate and shadow dispatch engineers during work completion., • Reporting to the Track Lead / Team Lead at Site, • Handling tickets/requests to troubleshoot the nature of reported problems and taking necessary steps to, • resolve those problems, • Troubleshooting technical issues, • Attends operations related meetings., • Site review & meetings with site SPOC., • Meetings with vendors, OEMs on open actions, • Project support meetings Required Skills / Qualifications: • Minimum 5-77yrs hands on dedicated experience as deskside/Onsite support/local IT engineer, • Strong Microsoft Operating System installation (Win10 / Win11 / MAC OS X) and troubleshooting skills., • Strong Experience in Providing Hands & feet Support for Network and Datacentre Equipment/Devices, • Familiarity of IT-OT systems (SCADA, PLC, HMI), industrial networking, Windows-based engineering workstations., • ServiceNow for SLA tracking and ticket management., • Good knowledge in handling RF scanners, industry level label printers (Zebra, etc), • Hands on experience in handling Data center hardware., • Good knowledge on Virtualization, Network, Storage servers, backups, VMs, and Cloud technology., • Strong Customer service skills, • Able to handle unforeseen situations., • Knowledge on ITIL Ticketing tools such as ServiceNow, BMC remedy etc, and ITIL concepts such as change process, problem, incidents, and requests tickets. Additional Responsibility • Might need to travel to other sites based on demand and requirements., • On-call requirement for P1/Urgent issues outside regular support hours (local business hours)., • Handle operations and customer requirements as per process and agreed SOW., • Possible rotational shifts. Soft Skills • Excellent communication and conversation skills (Verbal and Written), • Coordination with HCL internal teams, stakeholders, and vendors, • Good documentation skills, • Good working knowledge of MS OFFICE, • Should have a great customer handling skill, • Can drive HCL’s value and its methodology, • Ability to adjust to evolving processes HCL is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to secure@hcltech.com for investigation. A candidate’s pay within the range will depend on their skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year.

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job Description Overview Opportunity: Maintenance Technician Perform preventative and repair maintenance work to ensure the hotel is maintained according to established quality and sustainability standards while treating guests in a warm and friendly manner. Overnight shifts available. Your Growth Path Engineer - Engineering Supervisor - Chief Engineer Your Focus • Assist with preventative maintenance and complete work orders related to replacing and repairing ceiling tiles, sheet-rock and wallpaper., • Install or repair sheetrock and other wall coverings., • Paint designated areas and items., • Replace basic electrical fixtures, light switches, receptacles, light bulbs and fixtures., • Perform minor plumbing functions., • Focus on guest satisfaction scores and work toward increasing departmental and overall guest satisfaction., • Follow Service Recovery Guidelines., • Maintain the curb appeal including but not limited to snow removal, lawn care, gardening and trash removal., • Follow sustainability guidelines and practices related to HHM’s EarthView program., • Practice safe work habits, wear protective safety equipment and comply with MSDS and OSHA standards., • Perform other duties as requested by management. Your Background and Skills • High School diploma and Trade school course work in related field preferred., • Previous hotel maintenance experience or equivalent training required. Work Context • Work schedule varies and may include working on holidays and weekends and alternate shifts., • Requires standing for extended periods, walking, pushing, lifting up to 50 pounds, bending and reaching, kneeling, stooping, crawling and climbing. What We Believe People Are Our Capability – Hearts That Serve – Only Excellence – Stay Nimble - Own It

Job Description Job Title: Machine Maintenance Engineer Manager 1st Shift Location: Garden City, NY, US, 11530 Position Summary: The Machine Maintenance Engineer Manager ensures safety is the top priority while supporting Production needs. This hands-on role oversees the installation, repair, and upkeep of facilities, equipment, and offices. The ideal candidate has detailed knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) and excels at designing maintenance procedures, tracking budgets, performing inspections, and executing repairs. Supervisory Responsibilities: • Supervise and mentor employees in the maintenance department., • Train team members in equipment maintenance, safety procedures, and operational efficiency.Duties and Responsibilities:, • Maintain a safe and compliant work environment while meeting production needs., • Work independently or collaboratively with the team to complete tasks efficiently., • Perform routine inspections and maintenance across the production floor., • Monitor, troubleshoot, and repair production and process equipment., • Coordinate with contractors to obtain repair information, parts, and procedures., • Design and implement maintenance procedures; track budgets and expenses., • Facilitate property insurance audits and implement corrective actions as needed., • Negotiate contracts with external vendors for maintenance services., • Ensure operational efficiency of electrical, mechanical, and HVAC systems., • Maintain company facilities in a clean and hygienic condition., • Perform other duties and assignments as required.Required Skills and Abilities: Machine & Equipment Repair: • Maintain, troubleshoot, disassemble, and repair production equipment safely., • Perform alignments, lubrication, coolant changes, and other routine machine maintenance., • Demonstrate versatility across multiple systems and trades.Electrical, HVAC, & Plumbing:, • Basic knowledge of electrical systems (DC and AC, 24V–480V)., • Ability to read, interpret, and modify electrical schematics and prints., • Experience with ladder logic, PLCs, VFDs, and instrumentation/control devices., • Familiarity with gas/oil heating systems, air handlers, condensers, and evaporators.Safety:, • Promote and enforce a safety-first culture on the production floor., • Knowledge of Lockout/Tagout, Arc Flash, Machine Guarding, HazCom, DOT, RCRA, and material handling.Leadership:, • Strong problem-solving, analytical, and decision-making skills., • Ability to manage multiple priorities in a fast-paced environment., • Demonstrated success leading, motivating, and coaching diverse teams., • Excellent written and verbal communication; able to interact effectively at all levels.Education and Experience:, • Bachelor’s degree required., • 5–10 years of experience in manufacturing maintenance or equivalent training., • Background in general maintenance of manufacturing machines and process equipment (automated systems, chillers, air compressors, hydraulics, pneumatics)., • Proficiency with hand and power tools., • Experience with MS Office preferred.Physical Requirements:, • Ability to lift 50 lbs., • Active role requiring standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some tasks. Pay Details: $120,000.00 to $140,000.00 per year Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Travel Required: 30-mile radius from Westbury to Manhattan We are seeking an HVAC Sheetmetal Drafter to become part of our team! Our projects intersect many sectors from Leading Technology Firms/Hotels/Educational Campuses/Bio Labs/Multi-Family Housing/Commercial Industries/Finance Industry/Tenant Fit out and more...Employees gain a wealth of experience through drafting different projects and regularly interact with Design Professionals to gain project approval. Qualifications: • Proficiency in CAD, Navisworks, and other drafting tools, • Strong understanding of mechanical engineering principles and design standards, • Detail-oriented individual with strong analytical and problem-solving abilities, • Self-motivated and driven self-starter with high integrity, • Excellent communication, interpersonal, and commitment to getting the job completed with accuracy, • 6–10 years of relevant experience required Responsibilities: • Work with senior draftsmen, estimating team and project management team to understand the scope of work and installation intent to accurately design and produce shop drawings and as-built drawings, • Field Surveying Job Site to confirm dimensions, • Ensure compliance with benchmarks, ceiling heights and tolerances, • Flag conflicts on shop drawings that require architect/engineer review, • Ability to layout equipment and orientation of mechanical equipment as required, • Conduct thorough reviews of mechanical plans and drawings for accuracy, compliance, and feasibility, • Produce accurate shop drawings based on industry standard and norms, • Review and modify designs if mechanical plans presented are not achievable Company DescriptionFounded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components.Founded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components.

Job Description Efficient Energy Compliance is looking for several qualified professionals dedicated to combating climate change by decarbonizing buildings and providing resilient solutions for new building systems. As a crucial part of our expanding team, this role will be contributing to EEC’s services of commissioning, retro-commissioning, energy auditing, and resiliency retrofits in the NYC area. We are seeking qualified individuals who will demonstrate the ability to complete the following tasks with the technical and interpersonal skills outlined below: We are seeking a Commissioning Engineer with a strong background in energy efficiency and building systems to join our team. The ideal candidate will be responsible for overseeing the commissioning process of energy-efficient systems and technologies in both new construc Responsibilities • Lead and manage the commissioning process from kickoff through closeout, keeping projects organized, on schedule, and moving forward, • Coordinate closely with ownership, design teams, contractors, and vendors to align scope, resolve issues, and maintain progress, • Conduct site inspections to verify system installations align with design intent, specifications, and energy efficiency goals, • Review submittals and shop drawings to confirm systems are being installed in accordance with project requirements, • Oversee and witness equipment startup, pre-functional checklists, and functional performance testing across all systems, • Perform system testing, diagnostics, and troubleshooting to verify proper operation and identify issues early, • Execute point-to-point verification and sequence of operations testing for HVAC, electrical, lighting controls, and BAS systems, • Maintain commissioning schedules, issue logs, and documentation, actively tracking deficiencies through resolution, • Work directly with GC and MEP trades during construction to support system readiness, coordination, and turnover, • Analyze BAS trends and system performance data to identify inefficiencies and optimize building operations, • Monitor and validate energy performance during commissioning, providing practical recommendations for improvement, • Ensure all commissioning activities align with applicable codes and standards, including NYC Energy Conservation Code (NYCECC), LEED, and ASHRAE guidelines, • Support multiple projects simultaneously while maintaining strong communication, organization, and attention to detail, • Prepare and contribute to preliminary and final commissioning reports, including all testing documentation and system verification, • Coordinate building turnover by supporting O&M documentation, as-builts, and training for facility teams, • Participate in seasonal testing and warranty phase reviews, helping identify and resolve post-occupancy issues, • Utilize commissioning platforms such as Bluerithm to manage workflows, testing, and reporting Requirements: Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Energy Management, or a related field. 5+ years of experience in building systems commissioning, with a focus on energy efficiency and sustainable building practices. Strong knowledge of energy-efficient technologies, building systems (HVAC, lighting, controls), and renewable energy systems. Familiarity with commissioning processes for energy-efficient systems, including building automation, HVAC, and lighting systems. In-depth understanding of energy codes, standards, and certifications (e.g., NYC Energy Conservation Code, LEED, ASHRAE, Title 24). Experience with energy modeling and system analysis software (e.g., Trane Trace, EnergyPlus, etc.). Strong troubleshooting, diagnostic, and problem-solving skills. Excellent communication skills, with the ability to collaborate effectively with project teams, clients, and contractors. Ability to manage multiple projects and timelines, ensuring completion within scope, budget, and schedule. Preferred Skills: Certification as a Commissioning Professional (CxA) or LEED Accredited Professional (LEED AP). Knowledge of New York City’s energy codes and regulatory environment. Ideal Candidate Will Have • Excellent work ethic, • Strong verbal and written communication skills, • Excellent communication and presenter skills, • Attention to detail, • Strong time-management skills, • Strong organizational skills, • Self-motivation We thank all applicants for their interest, however, only those candidates selected for interviews will be contacted. We offer a competitive salary and good benefits package, including healthcare benefits and paid time off. 401K and Aflac & Flexible spending account. Interested candidates, please forward resume with salary requirements. Salary depending on experience. Efficient Energy Compliance LLC is proud to be an equal opportunity employer.

Job Description AFP. Management is growing. Come be a part of the growth. We are seeking a professional and customer-focused Task Force Director of Engineering to oversee our hotel Engineering Department at one of our assigned hotels. We are quickly adding hotels to our portfolio and are preparing for future growth opportunities. This role will likely lead to a permanent placement in one of our new or existing hotels. Our hotels are located in Florida (Marriott Orlando Downtown & Miami Doubletree Convention Center); Upstate NY (Hilton Albany, Delta by Marriott Utica, Doubletree Rochester), CT (Doubletree Bradley Airport), NJ (Ocean Place Resort & Spa), OH (Columbus Embassy Suites), IL (HGI Chicago), IN (Doubletree South Bend). Our ideal Taskforce Director of Engineering candidate must possess extensive knowledge of hotel engineering operations, a positive attitude, and the proven skills to oversee all operations activities and departments in the hotel in order to maximize revenue, deliver a positive guest experience and create a team atmosphere that promotes learning and excellence. This position will require travel with extended time to the assigned hotel. The position will also be required to be at the Corporate Offices in Great Neck, NY. JOB SUMMARY • The Area Chief Engineer / Director of Engineering provides strategic and operational leadership for engineering, maintenance, life safety, and physical plant operations for the hotel and, when assigned, additional properties within the portfolio. This role is responsible for protecting the hotel asset through effective oversight of building systems, preventive maintenance, capital improvement planning, contractor management, regulatory compliance, and engineering team development., • This leader ensures that all mechanical, electrical, plumbing, HVAC, refrigeration, and life safety systems are maintained and operated in a safe, efficient, and guest-ready manner. The Area Chief Engineer / Director of Engineering partners closely with property leadership to improve guest satisfaction, reduce downtime, manage departmental expenses, support renovation and capital projects, and ensure brand and company standards are consistently upheld., • This position also provides oversight for public space appearance, back-of-house functionality, and operational readiness, ensuring all areas reflect a clean, safe, and well-maintained environment for guests and team members. General Requirements • Strong leadership, organizational, and strategic planning skills., • Advanced knowledge of HVAC, plumbing, electrical, refrigeration, boilers, water treatment, life safety, and building automation systems., • Strong knowledge of budgets, forecasting, capital planning, and preventive maintenance systems., • Ability to read and interpret blueprints, schematics, technical manuals, and compliance documentation., • Strong working knowledge of OSHA requirements, Lockout/Tagout, fire/life safety procedures, hazardous materials handling, and risk prevention practices., • Excellent written and verbal communication skills., • Ability to lead teams across multiple disciplines and influence operational results through accountability and follow-through., • Strong vendor and contractor management experience., • Ability to train, mentor, coach, and develop engineering team members and subordinate leaders., • Computer proficiency with maintenance systems, work order platforms, and energy management/building automation systems. DUTIES & FUNCTIONS Fundamental Responsibilities • Provide leadership and direction for all engineering and maintenance operations., • Oversee the safe and efficient operation of all building systems, including HVAC, plumbing, electrical, refrigeration, mechanical equipment, fire/life safety, and energy management systems., • Protect and maintain the physical asset through a structured and accountable preventive maintenance program., • Develop, implement, and monitor engineering standards, operating procedures, and maintenance protocols., • Inspect the physical condition of the property on an ongoing basis and prioritize repairs, replacement needs, and improvement opportunities., • Lead departmental planning related to repairs, renovations, deferred maintenance, and capital expenditure projects., • Prepare and manage engineering budgets, labor costs, expense controls, and capital requests., • Ensure accurate documentation of engineering logs, inspections, maintenance records, compliance reports, and project updates., • Monitor service response times, work order completion, and maintenance quality to support guest satisfaction and operational efficiency., • Maintain compliance with all company policies, brand standards, safety programs, and federal, state, and local regulations., • Serve as the primary engineering contact for major building issues, emergency response, vendor coordination, and operational escalation., • Oversee contractual obligations under CAM and any other relevant service or maintenance agreements., • Partner with General Managers and regional leadership to support property goals, operational stability, and long-term asset preservation. Leadership & People Management • Hire, train, schedule, supervise, and develop engineering team members., • Establish performance expectations and hold the team accountable for productivity, professionalism, safety, and response standards., • Conduct performance reviews, coaching, corrective action, and succession planning as needed., • Promote teamwork and strong interdepartmental communication with Front Office, Housekeeping, Food & Beverage, and other departments., • Support a culture of urgency, accountability, professionalism, and service. Operational Oversight • Oversee maintenance and appearance standards for guest rooms, public areas, heart-of-house spaces, and exterior grounds., • Ensure timely response to guest room maintenance issues and operational service requests., • Support the upkeep of all major guest-facing and employee-facing areas, including but not limited to:, • Lobby, atrium, corridors, and entrances, • Restaurants, lounges, and Starbucks public areas, where applicable, • Fitness center and related equipment, • Pool areas, restrooms, and surrounding spaces, • Public restrooms and employee restrooms, • Employee hallways, cafeteria, offices, and back-of-house spaces, • Parking garages, loading docks, and exterior areas, • Oversee deep-cleaning and facilities support projects such as floor care, pressure washing, high dusting, carpet extraction, and seasonal maintenance efforts., • Ensure proper use, storage, and maintenance of tools, machinery, supplies, and equipment., • Manage inventory levels and purchasing needs for engineering supplies, parts, and related materials. Guest Focus & Service • Ensure the property reflects a safe, functional, and well-maintained guest experience at all times., • Respond to maintenance-related guest concerns promptly and professionally., • Support hotel cleanliness, maintenance, and overall guest satisfaction scores., • Assist in preparing for brand inspections, quality audits, ownership visits, and property walk-throughs., • Safety & Compliance, • Ensure compliance with all OSHA, fire, life safety, environmental, and company safety requirements., • Enforce proper PPE usage, Lockout/Tagout procedures, chemical handling, and emergency response protocols., • Lead engineering participation in emergency preparedness, evacuation procedures, and incident response., • Coordinate required inspections, permits, certifications, and follow-up corrective actions. Area-Level / Portfolio Responsibilities • When assigned, provide engineering guidance and operational support across multiple properties., • Assist regional leadership with engineering assessments, capital planning, project execution, and standardization of maintenance practices., • Travel between assigned properties as needed to support operational priorities, inspections, special projects, and leadership development., • Help implement best practices, preventive maintenance consistency, and engineering accountability across the assigned area. Operational Needs & Scheduling • Hospitality is a 24-hour operation. Associates may be required to work varying schedules, including early mornings, evenings, overnight shifts, weekends, and holidays, based on operational needs and hotel occupancy levels. Schedules, staffing levels, and assigned duties may fluctuate to meet business demands, special events, and guest service requirements. Salary & Compensation is based on experience & certifications/licenses with a range from $75,000 to $125,000. Qualifications: Demonstrated ability to effectively interact with people of cultural, disability, and ethnic backgrounds 5 years or more of progressive hotel or building management experience (Marriott or Hilton Preferred) With opening hotels, previous hotel pre-opening experience preferred Service oriented style with professional presentations skills At least 5 years experience in a senior role within facility management Proven leadership skills Engineering/Facility Management degree preferred Must possess the following strengths: High energy, entrepreneurial spirit, motivational leader, effective communicator, effective in providing exceptional customer service and ability to improve the bottom line Clear concise written and verbal communication skills in English Must be proficient in Microsoft Word and Excel AFP Management is a EOE Protected Veterans/Disability Employer.. Applicants must complete a successful Hiring Employment Screening..

Job DescriptionElectrical Engineer – Autonomous Weapons & Drone Systems Onsite | Great Neck, NY Full-Time | U.S. Citizenship or ITAR Eligibility Required Be part of a mission-driven team redefining autonomous defense. Wild West Systems builds next-generation drones and munitions for America and her allies - fast, affordable, and superior by design. As an Electrical Engineer, you'll help design, prototype, and deploy electronics for autonomous systems that change how the battlefield operates. ???????? About Wild West Systems Wild West Systems is a defense technology startup breaking conventions in autonomous edge defense through modular, AI-powered weapon platforms - designed, built, and launched in the USA. We arm the future warfighter with precision, affordability, and swagger. If you thrive on speed, grit, and purpose - welcome to the frontier. Why This Role Matters As an Electrical Engineer at Wild West Systems, you'll design the electronic backbone of our drone and munitions platforms - taking concepts from whiteboard to field-ready systems. You'll work directly with seasoned engineers across hardware, software, and mechanics to bring ideas into reality. You'll be part of a small, fast team where every design, every wire, and every test matters. What You'll Do • Electrical Design: Develop electronic systems from schematic to PCB layout and production release (Altium preferred)., • Prototype & Test: Support bring-up and validation of boards, including signal integrity checks, power testing, and troubleshooting., • Power Systems: Design and manage battery management, voltage regulation, and power distribution systems., • Integration: Collaborate with mechanical, propulsion, and firmware teams to ensure seamless system function., • Documentation: Produce detailed schematics, BOMs, and test procedures for builds., • Continuous Improvement: Participate in design reviews, trade studies, and field tests to refine performance and reliability., • Hands-On Work: Solder, wire, assemble, and debug - your designs don't just live in CAD.What You Bring Required: • B.S. in Electrical or Electronics Engineering (or related field), • 2–4 years of hands-on experience designing and testing electronic hardware, • Experience with PCB design tools (Altium strongly preferred), • Solid foundation in analog/digital circuits, grounding, and power integrity, • Comfortable with lab tools - oscilloscopes, logic analyzers, soldering equipment, • Familiar with embedded hardware (MCUs, sensors, CAN/SPI/I²C/UART comms), • Thrives in high-speed, hands-on, high-ownership environments, • U.S. citizen or ITAR-compliant status (green card, refugee/asylee, or eligible authorization) Preferred: • Experience in defense, aerospace, or robotics hardware design, • Knowledge of military standards (MIL-STD-461, MIL-STD-810), • Exposure to motor drives, ignition systems, RF, or wireless links, • Familiarity with DFM/DFA and rugged design principles, • IPC-related experience (IPC-A-600, CID/CID+), • Experience with field testing or manufacturing support Why You'll Love It Here, • Mission That Matters: Build systems protecting America and her allies., • True Ownership: Small team, direct impact, zero bureaucracy., • Elite Benefits:, • 100% coverage for employee health, dental, and vision, • 90% coverage for spouse/family, • Culture of Action: Fast decisions, real results, no wasted time.Additional Info, • Onsite position based in Great Neck, NY, • Must meet ITAR requirements, • Uses E-Verify for work authorization, • No staffing agencies - direct applicants only, • Equal Opportunity Employer ???? Apply: Recruiting@wws.inc

Job Description Senior HVAC Engineer Type: Full Time / Part Time Location: New York City About the Job NY Building Systems Consultant Inc. (NYBSC) is a Professional Engineering and Energy Consulting Company. It was formed by industry professionals that each has a more than 10 years’ experience. NYBSC Energy and Engineering team is comprised of individuals with complete industry certifications including NYS & CTS Registered Professional Engineers (PE), Existing Building Commissioning Professional (EBCP), Certified Energy Auditor (CEA) and Certified Energy Manager (CEM). We are currently seeking Senior HVAC Engineer for our design and build team in our New York City office. Equal Employment Opportunity is a vital component of our company culture and our success. We offer a competitive salary, vacation, and personal days. Experience: You should have demonstrated experience in at least five of the following areas: · Load calculations and some Energy modeling experience · Design mechanical systems including: heating, cooling, heat rejection, air and water distribution, ventilation, air conditioning, building automation and controls. · Familiarity with codes, specifically NYCECC, CMR, IMC, ASHRAE standards 55, 62.1, 90.1 · Familiar with LL97, LL87, energy auditing and commissioning. · Prepare contract drawings detailing the designed systems using AutoCAD. · Select equipment for use in building systems. · Manage a small project, work area or technical skill set, monitor quality of work, and is involved in client liaison. Requirements: Ø Bachelor’s Degree in Mechanical Engineering with a sound knowledge of mechanical engineering fundamentals. Ø 4+ years of experience in commercial and residential HVAC design. Ø PE License preferred. Ø LEED AP preferred. Ø Experience in Revit preferred. Ø Proven interest in the field of building design and energy savings. Qualities: v Good communication skills essential for team-based working v Excellent planning and organization skills required for our fast-paced environment v Must be highly motivated, proactive and willing to take on new challenges Benefits: • Competitive Salary + Benefits For apply this job, send your resume to info@nybscinc.com.

Job Description The Estimator generates proposals that meet customer's specifications and other requirements, and prepares the final budget for the project, product, or service. This is accomplished through collaboration with Engineers, the Sales Team, and other related departments. Essential Job Responsibilities not limited to: Estimating • Review blueprints and make decisions on product that meets project specifications, code requirements, and any special project criteria, • Use established pricing schedules to prepare and accurately generate proposals that comply with plans, specifications, and any special project criteria provided by the Sales Reps, • Use discretion with respect to product selection to achieve customer specifications and achieving the company’s profitability, • Accurately communicate to the customer the scope of the proposal and any special deviations as it relates to the plans and specifications through generation of a scope document, • Prepare and submit the final proposal to the customer for each project using VMC’s products or services within stated timeframes Sales Support • Communicate effectively with the relevant departments to achieve objectives, which involves use of in-depth product knowledge and product application experience, • Escalate customer concerns effectively, • Accurately maintain the key project information and total scope of work in all sales proposal templates, sales estimating tools, and sales quote log, • Develop and accurately maintain all data in required sales trackers, • Support customer sales through service, education, and effective problem-solving, • Support strategic sales plan Requirements Minimum Qualifications: • Bachelor’s Degree in Engineering is a plus, • 2 years commercial construction Experience, • 2 years project management experience with a contractor is preferred., • 1 year Estimating experience with an HVAC equipment dealer, • Strong team player with excellent people and communications skills, • Proven ability to read plan drawings and blueprints, • Excellent math skills, ability to apply concepts of basic geometry, • Strong attention to detail, resourceful, self-starter and a problem solver, • Demonstrated excellence in organization and time management skills, • Exceptional customer service skills, positive and upbeat attitude, • Strong team player with excellent people and communication skills, • Must be able to travel maximum of 5% if needed, • Sales Experience is a plus ------------------------------------------------------------------ At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals, • Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company — APPLY TODAY! ------------------------------------------------------------------ We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic. Company DescriptionFor over 10 decades, VMC Group has been recognized as a world leader in the design and manufacture of vibration isolation, seismic control and shock protection products. Our comprehensive product and engineering solutions cover a variety of industries – commercial construction, industrial/vehicular, OEM and military/aerospace. Our full range of spring, elastomeric architectural mounts, wire rope isolators, curbs and bases are proven to meet and exceed specifications for any seismic, non-seismic, shock, or even bomb blast application. VMC Group’s project managers and engineers are best known for working closely with our customers to exceed their expectations in the design, development and manufacturing of solutions for a specific application need. Whether the challenge is to solve a vibration isolation issue for a new piece of equipment or manage a seismic energy spec for a building structure, your VMC team works closely with your project group to engineer solutions to ensure years of superior resilience and isolation integrity. We call this philosophical approach The Power of TogetherTM, and it defines the partnering relationship you can expect when you work with our firm. We are In It With You. That’s why our company and each of our brands have emerged as and continue to be world leaders. The VMC Group is proud to be an Affirmative Action/Equal Opportunity Employer/Disability/Veteran. The VMC Group maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks.For over 10 decades, VMC Group has been recognized as a world leader in the design and manufacture of vibration isolation, seismic control and shock protection products.\r\n\r\nOur comprehensive product and engineering solutions cover a variety of industries – commercial construction, industrial/vehicular, OEM and military/aerospace. Our full range of spring, elastomeric architectural mounts, wire rope isolators, curbs and bases are proven to meet and exceed specifications for any seismic, non-seismic, shock, or even bomb blast application.\r\n\r\nVMC Group’s project managers and engineers are best known for working closely with our customers to exceed their expectations in the design, development and manufacturing of solutions for a specific application need. Whether the challenge is to solve a vibration isolation issue for a new piece of equipment or manage a seismic energy spec for a building structure, your VMC team works closely with your project group to engineer solutions to ensure years of superior resilience and isolation integrity.\r\n\r\nWe call this philosophical approach The Power of TogetherTM, and it defines the partnering relationship you can expect when you work with our firm. We are In It With You. That’s why our company and each of our brands have emerged as and continue to be world leaders.\r\n\r\nThe VMC Group is proud to be an Affirmative Action/Equal Opportunity Employer/Disability/Veteran. The VMC Group maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks.

Job DescriptionFST Technical Services Commissioning (Cx) division is one of the leading Cx firms in the country. We partner with clients for quality assurance in the design, construction, and post-acceptance phases of building projects. We ensure that equipment in mechanical, electrical, plumbing, and associated systems are designed, installed, and functionally tested to meet the clients requirements and design intent. We have extensive experience working on healthcare facility projects, ensuring that critical systems operate reliably and efficiently to support patient care and safety. For this position of Commissioning Field Engineer II on offer includes an excellent salary and benefits package. About the Job: A Field Engineer II reports directly to his or her Team Leader and to the team’s Project Engineers, and is directly responsible for the execution of field and office assignments as directed. Essential Functions Field Engineer must have general knowledge of the following topics: Refrigeration, HVAC, Steam management and distribution systems, pumps, fans, motors, chillers, boilers, air ventilation balancing systems, BMS systems and VAV. Field Engineer holds the following responsibilities: • Site Inspections and reports., • Equipment Testing., • Submittal Review and preparation of comments, • Document and Specification reviews and updates, • Create and execute commissioning checklists for the respective equipment and systems as directed by the team leader, • Collection and tabulation of field data using FST testing equipment, • Preparation and writing of reports., • Proper use of FST test equipment including maintenance, cleaning and reporting damages to their respective Team Leader, • Assist in executing performance test requirements., • Individual Time and Expense management., • Any special projects as requiredRequirements:, • Bachelor’s Degree in Mechanical/ Electrical Engineering, minimum 1-3 years of experience., • Must be a self-starter and capable of working independently or in a team environment., • Must possess a strong desire to learn and participate in the company developmental training program, • Trade Professional affiliation, a plus., • Proficiency with Microsoft products (Word, Excel, Power Point, etc.)Technical writing skills a plus, • Strong ability to work in changing environment and adapt to varying working environments., • Must be able to lift at least 30 pounds and climbing ladders Pay range $75k-$90k based on experience. FST Technical does not offer employment-based visa sponsorship for this position. Applicants must be legally authorized to work in the United States without the need for employer sponsorship now or in the future. Powered by JazzHR Kbs1DJDIMm

Job Description Houseperson Location: Best Western JFK Airport Hotel|144-25 153rd Lane, Jamaica, NY 11434 SUMMARY: Responsible for general cleaning and maintenance duties and a variety of cleaning tasks in public areas and suites. RESPONSIBILITIES: • Lobby: Clean all fingerprints off glass doors, Registration Desk and run vacuum cleaner. Public Restrooms: Clean Sink, Toilet, Mop Floor - Replenish supplies as needed., • Exercise Room: clean all mirrors, wipe all equipment, take out trash, run vacuum cleaner, clean glass doors. Water flowers for the entire outside of hotel., • Guest Laundry: clean washer/dryer, table, mop floor as needed., • Help with excessive laundry when required., • General cleaning of offices and Front Office areas. General cleaning of Associate break room., • Associate bathroom: clean sink, toilet, mop the floor. Replenish toilet paper and paper towels as needed., • Communicate changes in suite status with the Front Desk., • Assist the Chief Engineer in resolving guest complaints concerning the Maintenance Department., • Deliver cribs, roll-away beds, and various related items to suites as requested by supervisor or guest., • Making notations on various logs where these amenities have been delivered - i.e. cribs and roll-away beds locations must be recorded in the Log Book at the Front Desk., • Responsible for knowing hotel emergency procedures., • Accommodate guest special requests courteously., • Answer guest questions regarding hotel and local area facilities and services., • Work Front Desk shifts when needed, • Each associate will be required to follow the rules as found in the M&R Employee Handbook, • Perform other duties as assigned by management, of which employee is capable of performing

Job Description Machine Maintenance Engineer Manager - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Facilities & Maintenance Engineer Manager will ensure that safety comes first in all efforts while directly supporting the needs of Production. This position will oversee the repairs, installations, and upkeep of facilities, equipment, and offices. This is a hands-on position where detailed knowledge of equipment and facilities is required. Their main duties include designing maintenance procedures, tracking budgets and expenses and performing inspections to find problems and make repairs. The position requires knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) for installation, preventative maintenance, repairs, and upkeep. Candidates with these skills will be considered. SUPERVISORY RESPONSIBILITIES • Supervise employees of the maintenance department. Duties and Responsibilities: • Maintain a safe work environment while meeting the needs of production., • Ability to work independently or as a part of a team., • Perform routine work throughout the production floor., • Monitor, repair, and cite problems with process and production equipment., • Coordinate with various contractors to obtain the necessary repair information, required parts, and procedures to complete various projects and tasks., • Designing maintenance procedures, tracking budgets and expenses, and performing inspections to find problems and make repairs., • Train and supervise employees of the maintenance department., • Responsible for machine and facility maintenance., • Facilitates and assists Facility property insurance company by scheduling and participating in regular facility audits and follows up to address and implement corrective actions when deemed appropriate., • Negotiate contracts with outside vendors for execution of maintenance work., • Ensure operational efficiency of electrical equipment and mechanical systems through timely inspection and repair., • Ensure that company premises and facilities are kept in clean and hygienic condition., • Perform other duties and assignments as required. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Machine & and Equipment Repair, • Ability to maintain, troubleshoot, disassemble, and repair production equipment in a safe manner while minimizing downtime., • Execute machine repairs, alignments, lubrication, coolant changes, etc., • Demonstrate a willingness to learn various systems throughout the multiple trades., • Electrical, HVAC, & Plumbing:, • Basic understanding of electrical systems, including DC and AC voltage ranging from 24V to 480V., • Be able to read, interpret, and modify electrical prints and schematics., • Experience in ladder logic, PLC’s, VFD’s, instrumentation and control devices., • Familiarity with the operation of gas and oil heating systems., • Familiarity with the general operation of air handlers, condensers, and evaporators EDUCATION AND/OR EXPERIENCE • Bachelor’s degree required., • Minimum of five to ten years of experience and/or training., • Background in general maintenance of manufacturing machines, • General knowledge of process equipment (i.e. automated systems, chillers, air compressors, hydraulics, pneumatics, etc.), • Demonstrate proficiency in the safe use of an array of hand and power tools., • Experience with MS Office is preferred. SAFETY • Support a safety culture on the production floor., • Observance of guidelines of the safe use, handling, and disposal of various chemicals used., • Knowledge of safety topics (i.e. Lockout Tagout, Arc Flash, Machine Guarding, Hazcom, DOT, RCRA, Material Handling, etc.) LEADERSHIP • The individual must be a problem solver., • Sound analytic skills and decision-making capabilities, • Strong results orientation and execution capability; Excellent strategic and tactical thinking, • Proven ability to effectively manage multiple priorities in a fast-paced environment and consistently meet deadlines and achieve desired results., • Demonstrated ability to lead, motivate and coach people in varying disciplines to achieve performance goals; Solid team building skills., • Excellent written and verbal communication skills; able to communicate as effectively on the shop floor as in the executive suite. PHYSICAL DEMANDS • Ability to lift 50lbs., • This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $140,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

The Technical Support Engineer provides The Technical Support Engineer provides advanced technical and product support to customers, ensuring timely resolution of complex product and application issues. This role focuses on troubleshooting, issue investigation, and customer communication, working closely with Field Service, Engineering, and Product teams. The Technical Support Engineer plays a key role in maintaining high customer satisfaction, improving response times, and providing critical product feedback to support continuous improvement. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $90,000-$125,000 annually and offers a competitive benefits package. #LI-KR Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Provide advanced technical and product support to customers via remote tools, phone, email, and onsite support as needed, • Troubleshoot and diagnose complex hardware, firmware, and application issues to minimize customer downtime, • Triage incoming support cases, prioritize issues, and ensure timely resolution or escalation, • Serve as a technical liaison between customers, Engineering, R&D, Product Management, and Field Service teams, • Support engineering investigations by reproducing issues, collecting data, and validating corrective actions, • Coordinate and manage RMAs, including failure analysis and customer communication, • Facilitate efficient startup and commissioning of new installations, including remote commissioning support, • Review and create technical documentation such as troubleshooting guides, FAQs, application notes, and procedures, • Provide structured feedback on product performance, defects, and enhancement opportunities, • Train customer personnel on equipment operation, maintenance, and safe work practices, • Participate in support case reviews and contribute to process and product improvement initiatives Skills / Qualifications • B.S. in Electrical Engineering or an Associate Degree in Electrical/Electronic Engineering., • Minimum 3 years of experience in related technical or engineering roles., • Working knowledge of industry communication protocols such as Modbus, IEC 61850, DNP, and BACnet., • Excellent customer service experience in related businesses and customers, • Experience with troubleshooting product and application issues, • Understanding power systems, metering applications, industry standards, and electrical equipment., • Excellent analytical, diagnostic, and troubleshooting abilities., • Strong verbal and written communication skills, with the ability to explain technical issues to nontechnical users. Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Job ID: 554164689 Location: 1111 Stewart Avenue, Bethpage, NY 11714 Lightpath is one of the largest competitive local exchange carriers in the tri-state area. Weown and operate our infrastructure "from the ground up" by deploying over 20,000 route miles connecting 13,500 on-net/LIT buildings. With a strong portfolio of cutting-edge solutions for Internet, WAN, Voice, SD-WAN, Security & Cloud services, we enable Enterprise customers of all sizes the ability to react to new challenges while developing best practices for the future. With Lightpath's continued focus on network excellence and a "customer first" service commitment, we are building a workforce of the best talent that will meet the needs of our customers and reflect the diverse communities we serve. Job Summary Lightpath is seeking a Network Facilities Engineerto manage and oversee the critical facility infrastructure to include but not limited to structural, electrical, mechanical and plumbing of our owned and external vendor colocation facilities. Responsibilities include the tracking all assets, scheduling of preventative maintenance, infrastructure upgrades, monitoring of each facility from an infrastructure maintenance, infrastructure upgrade, emergency response,housekeeping, customer support prospective. We're looking for a skilled, enthusiastic colocation operations engineer to help organize and operate several colocation facilities from an infrastructure maintenance and upgrade prospective. This position is responsible for the support of planning, designing, and engineering of power and space allocations within the Lightpath facilities and Datacenters. Individuals in this position are responsible for supporting 100% uptime for the Datacenter and its customers. The power and space solution will also include the budgetary approval process as well as project management of the solution to completion. The Network Facilities Engineer will validate all solutions are complete and meet the quality standards. Also, all necessary databases and systems updates are required. It is expected that he/she will be self-motivated, have a good attention to detail and able to self-manage capital projects with an outstanding professional attitude. Will track all aspects of operations and performance of Critical infrastructure and will submit reports that will result in upgrades-based performance and/or capacity. This position will create and submit MOPs (Method of Procedure) and coordinate all work. These facilities consist of leased space within buildings that have power and cooling for Lightpath and customer electronic equipment as well as leased space within a collocation facility that is either a cage or cabinet where electronic equipment is place and or fiber cross connects inner connect to other spaces within the facility or building. These spaces are also ILA huts along a fiber route from New Jersey to Ashburn VA where Lightpath and Lightpath customers house electronic equipment for their leased fiber network from Lightpath. Responsibilities • Oversee all aspects of critical infrastructure maintenance to include but not limited to HVAC, generators, power plants and site BMS within a facility, including requests, plans to modify infrastructure., • Managing vendor maintenance contracts with to perform quarterly, semiannual and annual maintenance on the structural, electrical, mechanical and plumbing critical infrastructure., • Plan and maintain preventative schedules., • Planning, designing, and allocation of power and space allocations within the Lightpath facilities and Datacenters., • Individuals in this position are responsible for supporting 100% uptime for the Datacenter and its customers. The Planning support will include collecting space and power data on a periodic basis and design for network growth/expansion., • The power and space solution will also include project management, project budget tracking, and the oversight of the solution to completion. The engineer will validate all solutions are complete and meet the quality standards., • All necessary databases and systems data updates are required., • Support of emergency response procedures in case of power outages/failure., • Ensure compliance with Telcordia, OSHA, and company standards for Facilities Capital Projects. Monitor capital projects from planning through completion, ensuring quality assurance and compliance., • Maintain compliance and safety, environmental and regulatory standards that would apply., • Manage facility infrastructure upgrades, projects within a facility from a construction vendor prospective., • Oversee all aspects of external colocation spaces from a quarterly review with colocation vendors to understand uptime performance, maintenance records for critical infrastructure, LP fiber capacity., • Provide data/information for all collocation network growth and augmentation activities within an LP facility as well as external vendor facilities., • Drive process and procedure improvements within the organization. Develop and review MOPs (Method of Procedure) and SOPs (Standard Operating Procedure)., • Support to improve facility, network cost, efficiency, resiliency and reliability., • Provide support to installation and activation teams on fiber connectivity related questions, design and architecture., • Help support customer installations with a Lightpath collocation facility., • Interface with customers or potential customers, as needed., • Continuously build relationships with vendors and suppliers, as needed., • Be available for after hours, nights, weekends and holidays in case of a facility outage or issue. Qualifications • 10 + years' work experience in collocation facility operations, maintenance, planning, engineering, and or infrastructure deployment., • Management of critical systems in telecommunications facilities is preferred., • A good understanding of telecommunication networks and related equipment., • Strong knowledge of general industry networking technologies, including UPS, Generators, and Mechanical systems., • Strong knowledge of DC and AC power infrastructure in telecommunications and Datacenter environment, including UPS, generators, transformers and power distribution systems., • Experience in the installation of large amp-hour Wet Cell and VRLA battery strings., • Familiarity with various test equipment such as Medtronic's, Fluke, etc., • Working knowledge of building codes, environmental regulations, and safety standards., • Excellent documentation of records and reporting and good communication skills., • Familiar with collocation inventory systems, BMS systems, biometric access, video surveillance systems, electrical and cooling infrastructure systems, OSP networks, cross connect understanding., • Proficiency in using Microsoft Office, including advanced features of Excel and Word, as well as Visio and office systems (e.g., Netcracker, SalesForce, etc.)., • Highly organized and strong interpersonal skills to effectively communicate the impact of design alternatives and negotiating agreements within the project team., • Ability to adapt to a changing environment., • Ability to multitask, prioritize and manage time effectively., • Ability to travel is needed including but not limited to conduct site surveys, inspections, and attend client meetings. Travel will include remote facilities and vendor datacenter/CO locations. Lightpath is an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. Lightpath collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. This position is identified as being performed in/or reporting to company operations in New York State. The pay range at the time of posting in the specified locations is $115,000- $125,000/year. Pay ranges are supplied in compliance with New York State law. Pay is competitive and based on a number of job-related factors, including skills and experience.

The Field Service Engineer provides field service engineering and technical assistance to customers in areas of installation, startup, maintenance & repair, training, and modification of equipment. This role is based out of Dallas, TX with 70% travel. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $105,000- $120,000 annually and offers a competitive benefits package. #LI-KR Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Performing installation and commissioning of power quality and energy meters at customer sites, ensuring that it functions correctly and meets the operational standards specified., • Performing routine maintenance and diagnosing problems with equipment. Assist in repairing or replacing faulty parts and ensuring that the equipment is operational again in a timely manner., • Providing remote & on-site technical support to customers, troubleshooting issues as they arise, and resolving them directly or advising them on the necessary steps to fix them., • Training customers in the use of EIG equipment safely and effectively, often providing hands-on training and detailed operational manuals., • B.S. in Electrical Engineering, or Diploma in Electrical Engineering (required), • Minimum three years of relevant experience (required), • Good understanding of industry standard communication protocols with an emphasis on Modbus, IEC 61850, DNP and BACnet., • Knowledge of software, integration and automation, industrial controls, PLCs, and industry SCADA practices is an asset., • Strong understanding of the power systems, metering applications industry practices and electrical equipment being serviced., • Excellent analytical skills to diagnose issues and determine the best way to fix them., • Ability to communicate effectively with customers, explaining complex technical issues in a way that non-experts can understand. Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

The Manufacturing Engineer must have the ability to analyze problems and processes and offer solutions or work with senior engineers to implement solutions. Experience working with electronics, computers, automotive or robotics or similar technology field required. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $105,000 - $120,000 annually and offers a competitive benefits package. #LI-KR1 Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Assists in planning and designing processes for an electronics manufacturing facility ., • Maximizes efficiency by analyzing layout of equipment, workflow, assembly methods, and work force utilization in an electronic environment., • Daily tasks will involve working hand in hand with production in an Electronic Metering Production Department, • Determines the parts, equipment, and tools needed to achieve manufacturing goals according to product specifications., • Generates, reviews and updates work instructions and procedures as necessary to improve cycle times, cost and quality., • Works on projects/matters of limited complexity in a support role with other departments to assist in cost reduction and cycle time improvement., • Assists engineering with Prototype builds and creates all necessary documentation to transition product to production., • Assist production with ERP system (Netsuite/SAP) as necessary to ensure inventory and work orders are properly processed., • Bachelor's degree in manufacturing engineering/Mechanical Engineering or similar technical area., • 3-5 years' Experience in an electronics manufacturing environment where electrical testing of Printed Circuit boards and/or finished goods is performed, • Lean Six Sigma/5s Tools a Plus., • Experience with wiring, cable assemblies, PCB's, soldering and mechanical assembly of electronics strongly recommended., • Netsuite experience a plus, or ability to learn new software to assist production Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

The Embedded Firmware Test Engineer coordinates the activities of a group of Lab Technicians engaging in the testing of wiring devices and components thereof and works independently to oversee the tests and ensure tests are being completed. The Test Engineer designs, develops, modifies and evaluates electronic parts, components or integrated circuitry for electronic equipment, or other hardware systems and/or electrical engineering applications. #LI-CH1 Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Assisting with the scheduling of lab assignments and equipment maintenance to achieve efficient utilization of the Test Lab facilities., • Supporting certification agency representatives in the inspection and testing of wiring devices and their associated products., • Assisting with the design and devising of test procedures for new products, including the designing of any related test apparatus., • Reviewing and substantiating data, measurements and calculations to the satisfaction of both internal and outside agency representatives., • Setting up using standard procedures with Lab Techs to conduct testing of wiring devices and enclosures etc., • Training new Lab Technicians., • Setting up and operating all components in the high-power electrical test circuits. This includes components such as step-down transformer and its secondary taps, resistive and inductive load banks, secondary protective systems, and endurance machinery. Bachelor's Degree in Electrical Engineering or a related field (required) 3-6 years of experience in test and measurement environment (required) Ability to read complex blueprints and schematics to troubleshoot and repair Test Lab equipment. Working knowledge of applicable requirements of regulatory bodies such as U.L., CSA and the National Electrical Code. Experience with test and measurement equipment and methodologies for electrical systems Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Job Description Apply Here: https://secure.onehcm.com/ta/VRCNY.jobs?ShowJob=553797904&TrackId=ZipRecruiter Pay: $110,000.00 - $120,000.00 per year Job description: Vitreoretinal Consultants, one of the largest providers of the Retina subspecialty within Ophthalmology is seeking an IT Technician to work in our NY offices. In this role, you will be an important part of the team whose job is to support the IT Manager in the delivery of exceptional retina care to our patients. This position requires dedicated individuals who enjoy working with staff and doctors. You will also be required to travel to our other locations in Great Neck, Westbury, Riverhead, Rockville Center, Hauppauge, Flushing, Scarsdale, Elmhurst and New City. To learn more about our business visit. https://www.vrcny.com/ This FT position is 95% IT and 5% Facilities management. The individual will work as a team member with our current IT and Facilities managers. Skills required: • Strong computer server maintenance experience, • The applicant MUST have a current Microsoft Certification as well as a current VM Ware certification., • Expert knowledge of IT best practices, policies, and regulations, • Willing to train staff, • In-depth understanding of programming, computer science and digital security, • A clear understanding of client/server technology and network architecture, • Good communication, including writing, speaking and active listening, • Strong problem-solving, critical thinking and decision-making skills, • Customer service and interpersonal skills, • Excellent attention to detail, • Great project management skills, including organization, planning, time management and prioritization., • Basic handyman skills IT Technician duties and responsibilities: The IT Technician is responsible for several different tasks related to overseeing a company’s computer networks and improving the company’s network systems. Some of their daily responsibilities include: • Developing new network troubleshooting strategies to help reduce downtime and decrease maintenance costs., • Creating rational strategies for upgrading the company’s network software whenever a new update is available, • Constructing and implementing plans to ensure the company’s network continues to operate smoothly in the event of a problem, • Staying up to date with new network technology and reporting this information to the executive team each quarter, • Working closely with other department Managers to assess the growth needs and maintenance of the company’s network, • Run cables as needed, • Work with our software vendor ensuring servers are fully operating for all locations, troubleshoot and fix any downtime outages, • Create all employee network log ins and door access, • Monitor employee internet usage, • Assist the compliance officer to ensure SRA are performed yearly, • In charge of purchasing and installing all equipment and computer set-ups for employees and physicians, • Participation in the annual budget process, produce spreadsheets of needed medical and computer equipment Facilities Assistance Responsibilities • Facility and Alarm system monitoring, alert CEO, CFO and/or Practice Administrator of any alerts, • Equipment inventory management, • Assist in Price shopping for new equipment, • Equipment problem trouble shooting, • Equipment installation, • Phone and Printer systems management Job Type: Full-time Pay: $110,000.00 - $120,000.00 per year Benefits: • 401(k), • Health insurance, • Dental insurance, • Vision coverage, • PTO Experience level: • 2 years Schedule: • 8 hour shift Education: • Bachelor's (Preferred) Experience: • Maintenance: 1 year (Preferred) License/Certification: • Driver's License (Required), • Reliable car (Required) Ability to Relocate: • Must be willing to work out of our Westbury office and travel to our other NY offices as needed. Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Education: • Bachelor's License/Certification: • Driver's License (Required), • VMware Certification (Required), • Microsoft Certified: Azure Data Engineer Associate (Required), • Microsoft Office Specialist (Required) Ability to Relocate: • Westbury, NY: Relocate before starting work (Required) Work Location: In person

Job DescriptionAt Power-Flo Technologies, you’ll be part of a team that designs and delivers complete switchgear solutions. We are looking for you to join our collaborative team as an Electrical Design Engineer. This is a full-time, on-site role. Primary Function: Responsible for design of electrical panels and schematics to meet customer requirements. Provide panel jobs quotes and estimates. Act as project management on panel jobs. Assist with customer technical support. Post-sales support on core products. Design Engineer Essential Responsibilities • Review engineered contract drawings and specifications for the design of electrical control panels, • Design and layout of electrical panels using AutoCAD Electrical, • Ensure that all panels are being designed and constructed to UL Standards, • Creating Bill of Materials for the sales engineer team, • Create testing procedures for specific projects to be used by shop personnel, • Determine parameters to program variable frequency drives and soft starters, • Provide technical support on the products we manufacture Design Engineer Necessary Qualifications • 3 years+ experience in the design of electrical systems required, • Ability to use AutoCAD for electrical design work., • Hold a degree in the engineering field., • Must have a valid and clean driver's license to travel to job sites and other branches as needed. Design Engineer Physical Requirements • Some Minor Lifting and Moving of Parts and Equipment Salary commensurate with experience in the design of electrical systems (Range from $70,000 - $145,000 annually) Benefits Package • Medical, Dental, Vision, • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more. Generate, review, and refine questions and solutions based on real-world mechanical engineering scenarios. Apply advanced subject matter knowledge to evaluate and

We offer a supportive and innovative culture, along with a competitive compensation package and comprehensive benefits, including: Choice of three medical plans and two dental plans Vision insurance Company-paid life and AD&D insurance Supplemental coverage options (life, critical illness, accident,

Zaelab is looking for a Project Manager in New South Wales, Australia to support e-commerce implementations from kickoff to launch.Successful candidates will have 3+ years of experience in project management for e-commerce or technology projects, and strong communication and problem-solving skills.R

Project Compliance Manager - Domestic Content This range is provided by Empact Technologies.Your actual pay will be based on your skills and experience — talk with your recruiter to learn more.Project Compliance Manager – Domestic Content (PCM-DC) About The Company Empact Technologies plays a cr

A leading project management firm is seeking a Project Manager to lead project planning and implementation remotely.The ideal candidate has over 2 years of experience in an Agile/Scrum environment, proficiency in project management tools like Jira, and strong problem-solving abilities.This role offe

A customer engagement technology provider seeks a Strategic Project Manager to oversee client projects, nurture relationships, and drive program performance.The ideal candidate has 2+ years of client-facing experience, strong communication skills, and analytical abilities, thriving in a dynamic envi

Renovation Brands is seeking a NetSuite Technical Project Manager to coordinate and deliver NetSuite initiatives across the organization.This fully remote position requires excellent communication, strong NetSuite expertise, and project management skills.The successful candidate will manage multiple

A leading technology company is seeking a SAP Project Manager to implement SAP S/4 solutions in a complex environment.The role requires 10+ years of experience, hands-on project management skills, and knowledge of SAP functionalities.This position offers a competitive salary range of $78,000 to $160

Trueform Concrete is hiring a NetSuite Technical Project Manager to lead the delivery and improvement of NetSuite initiatives.The ideal candidate should have over 5 years of NetSuite experience, strong project management skills, and the ability to work across diverse stakeholders.This is a remote po

A leading consulting firm in the United States is seeking a Project Manager to lead planning and delivery activities for Workday implementations.The ideal candidate will have over 3 years of experience, strong project management skills, and the ability to collaborate effectively with clients and tea

A leading healthcare plan administrator in the United States is looking for an experienced Business Project Manager to lead critical projects that enhance business outcomes.The ideal candidate should have at least 6 years of enterprise-level project management experience and excel in communication a

Beacon Technologies is seeking a Senior Strategic IT Project Manager for our client partner.Responsible for the successful initiation, planning, development, administration, risk management, implementation, control, and closure of large-sized projects across multiple business units through the Proje

A leading HR services firm is seeking an Implementation Project Manager to manage client relationships and ensure successful onboarding.The ideal candidate will have a bachelor's degree and 3+ years of project management experience, particularly in HR or payroll.This remote position requires excelle

Dauntless Discovery is seeking a client-focused e-Discovery attorney for a remote project management role.The ideal candidate will have a JD from a top law school, extensive experience in large law firms, and strong skills in Relativity Analytics.This role requires managing cross-functional teams an

A leading fintech company is seeking a highly motivated Technical Project Manager to oversee technical, product, and marketing projects.This role involves developing project plans, tracking progress, and analyzing challenges for improvement.The ideal candidate will have 2+ years of experience in a t

A digital agency is looking for a Project Manager to manage website projects from strategy to delivery.The ideal candidate will have over 5 years of project management experience in a digital agency and be skilled in Agile methodologies.Responsibilities include producing project documentation, finan

A leading ecommerce development team is seeking a full-time remote Project Manager to maintain and grow client relationships.Responsibilities include managing expectations, collaborating across teams for project success, and identifying upselling opportunities.Ideal candidates should have strong cli

Join to apply for the ERP Project Manager, Senior role at Infor Join to apply for the ERP Project Manager, Senior role at Infor Get AI-powered advice on this job and more exclusive features.The ERP Project Manager coordinates and monitors billable projects from initiation through delivery.This role

Overview We are seeking an experienced Oracle Cloud SCM Functional Consultant to join our team.The ideal candidate will have strong expertise in Oracle Cloud Supply Chain Management (SCM) modules and a deep understanding of supply chain processes.This role involves working closely with business stak

A leading telecommunications firm is seeking a Customer Project Manager to oversee wireless implementation projects across the United States.This is a remote position requiring 10+ years of telecommunications project delivery experience, particularly in 5G and LTE network rollout.The role involves m

In addition, you will: Manage and lead internal and external project teams to ensure on-budget and on-schedule delivery Report and communicate to the external customer(s) and internal management each day Build processes and teams required to deliver all project requirements Coordinate with the P