Trabajos equipment engineer en Spokane, WashingtonCrear alertas

Description Leidos Engineering has an opportunity for a Lead EPC Substation Project Engineer. This position will be part of our unique and fast-growing EPC Solutions group, which sits within our Power Delivery Solutions division that provides consulting services to both public-owned and investor-owned electric utilities. These consulting services provide clients with overall project management tasks in the areas of comprehensive engineering design of electrical transmission and distribution, substation and transmission line projects nationwide. This role has remote working capabilities, but candidates should be located in the Pacific Northwest region of the US in order to be available for client-related travel in the region as needed. As a Lead EPC Substation Project Engineer, you can expect to: • Act as the project technical lead for high voltage substation designs focused on projects utilizing EPC or other progressive contract vehicles that collaborate with construction., • Lead and/or perform Substation Physical Electrical engineering design (including general arrangement, electrical plans and sections, grounding plan and details, raceway plan and details, shielding plan and details, lighting plan, and details, etc.) at HV and EHV voltage levels while adhering to prevailing standards, practices, procedures, and project/program requirements., • Lead and/or perform Protection and Control engineering design (including relaying one-lines, AC schematics, DC schematics, metering, SCADA systems, station communications, station automation, station security, etc.) at HV and EHV voltage levels while adhering to prevailing standards, practices, procedures, and project/program requirements., • Lead and/or conduct engineering studies and calculations (including bus spans, shielding, lighting, conduit fill, AC/DC loading and system design, etc.)., • Understand and apply industry standards, applicable state and federal safety codes, regulatory compliance requirements, and construction codes to projects., • Create equipment, material, construction, and testing and commissioning specifications., • Perform quality control (QC) reviews and lead QC review meetings on applicable engineering deliverables produced by junior staff, peers, and remote offices on small, medium, and large projects while adhering to the PDS quality management standard., • Provide technical oversight, direction, and support for project teams., • Assure proper documentation of project technical data., • Ensure and facilitate project team collaboration and communication across all disciplines and resolve design conflicts as needed., • Coordinate with project managers to successfully deliver projects to our clients., • Work directly with clients on project-related issues., • Direct and/or participate in client meetings and job-site visits to collect and deliver design and engineering information., • Identify and resolve project-related issues while proactively communicating and collaborating with the client., • Perform evaluations of existing facilities to propose upgrades and replacements and present findings and recommendations to our clients., • Apply value engineering principals for economized, constructible, and safe designs., • Complete conceptual design (one-line and general layout) to support project planning., • Provide professional mentorship while setting and maintaining a positive professional example for the team and junior staff What Sets You Apart (Background Qualifications): • Bachelor’s degree in electrical engineering from an accredited university with eight (8) + years of prior relevant experience in utility substation design/engineering;, • Professional Engineer (PE) License Required, • Ability to Demonstrate advocacy of Quality Assurance and Control in the field of substation engineering., • Comprehensive understanding of the utility grid (power generation, transmission, and distribution) system and the theories and principles involved in substation engineering., • Comprehensive understanding of industry standards (including NEC, NESC, NEMA, IEEE/ANSI) and their application to projects., • Competence in researching engineering and design issues, evaluating alternatives, making sound recommendations, and preparing and presenting recommendations., • Ability to meet deadlines under high-pressure situations., • High level of computer competency/Proficiency with using MS Office applications., • Team player who can work effectively in a team environment with an ability to deal with and lead a variety of individuals from various socio-economic, cultural, and ethnic backgrounds., • Strong written and oral communication skills; Strong organizational skills., • US Citizenship required for access to Leidos' client platforms/systems, • Ability to travel locally/regionally up to 15% of the time You Might Also Have (Preferred Qualifications): • Experience with substation physical and protection and control design., • Experience with engineering programs and software (including SKM, ASPEN, ETAP, CDEGS, or vendor software)., • Experience with serving as firm-client liaison in a support and lead engineering role., • Prior experience as a substation lead engineer performing QC reviews and staff training/mentorship, • Experience leading renewable generation projects or interconnections, • Experience working on EPC projects or similar style of contracts, • Active membership in national engineering societies and work groups (IEEE, PES, etc.), • Construction support experience. At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. PDSPM PDSSUBSTATION If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. March 31, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $107,900.00 - $195,050.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Kaiser Aluminum is known around the world for its superior quality. Our secret is what we put into it—innovative thinking, industry-leading reliability, and a world-class commitment to customer service. In short, the same qualities we look for in our people. We are looking for a Manufacturing Support Automation & Controls Engineer to join Kaiser Aluminum in Spokane Washington! The Manufacturing Support Automation & Controls Engineer reports to the Process Improvement Engineering Manager. This position supports/leads flow team directed Manufacturing Excellence activities being conducted at the Trentwood facilities. This position works with facilitators, engineers, manufacturing leaders, craft personnel and operators, as needed with the goal of improving process capability, lowering manufacturing cost, increasing reliability and reducing waste in the operation. What’s in it for you! • Salary range $70,000 to $125,000 base, • High deductible medical, dental, vision, and basic life insurance, including spouse and children (modest payroll deductions), • 10 paid holidays per year, • Vacation (3 weeks starting out), • Supplemental leave (used in conjunction with Washington Paid Family & Medical Leave), • 401K with matching company funds, • Quarterly bonus structure, • Tuition reimbursement What you will work on: • Validate and maintain control system design/architecture for new and existing equipment., • Provide support and coordination for equipment start-ups and maintenance outages., • Assist in trouble-shooting equipment control and electrical systems., • Provide engineering support for the maintenance and operations resources during troubleshooting and RCA activities., • Perform controlled process improvement changes in PLC systems, HMI systems, and in level 2 server and coordination systems., • Coordinate with vendors, process engineers, and production personnel for continuous improvement., • Develop project scope, feasibility, cost estimates, and schedule, for assigned projects., • Prepare, organize, and update project documentation (Manuals, PM's spare parts, correspondence, drawings, drawing lists, material listings, etc.), • Help support and develop a culture at Kaiser Trentwood that promotes lean thinking and right first time for all work performed., • Collaborates with the operational team to develop and report performance metrics against targets to determine gaps in performance and recommends/executes improvement initiatives., • Advise the team on improvement opportunities through requirements gathering, data extraction/transformation, organized analysis and effective visualization of information., • Drive process consistency through standard work, process control, right first time, and management of change., • Comply with all safety, quality and environmental regulations. What you will bring to the position: • An undergraduate degree in Electrical Engineering., • A degree in Computer Engineering combined with industrial experience may substitute for the Electrical Engineering degree., • An undergraduate degree in ME Automation with sufficient coursework in automation/robotics may also substitute., • Zero to five (0-5) years previous electrical engineering experience., • Experience with industrial PLC systems, HMI systems or distributed control systems, or relevant laboratory education., • Excellent analytical and problem-solving skills., • Strong PC skills, including Windows, Word, and Excel., • Excellent communication skills (written and verbal) and organizational skills., • Proven ability to work in teams., • Ability to manage multiple tasks simultaneously. The preferred candidate will have knowledge and experience with: • Minimum of two (2) years of experience in the maintenance department of a heavy industrial facility., • Familiarity with database tools and techniques., • Programming experience. (Python preferred), • Familiarity with CMMS software (MAXIMO preferred)., • Knowledge of National Electrical Code, AC & DC motors No third-party candidate submissions are being accepted at this time for this opening. This position has been determined to be a safety-sensitive position and requires a pre-employment drug and alcohol screen that includes marijuana. We are an equal opportunity employer. All applicants will be considered based on job-related qualifications and abilities. There shall be no discrimination on the basis of age, race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, veteran, or disability status. About Kaiser Aluminum: Talented people join our team because we are a company passionate about environmental sustainability, employee growth, contributing back to our communities and championing an inclusive culture.

Job DescriptionCompany Description At Coffman Engineers, we serve as both prime consultant and subconsultant on projects large and small. The markets we serve include commercial, institutional, government, industrial, healthcare, energy services, and more. Incorporated in 1979, we have employees in more than 23 locations serving clients across the United States and overseas. Our broad range of markets, clients, and services, coupled with industry-leading talent, provides unique and exciting opportunities to grow as professionals, serve clients, and make a difference in our communities. To meet client objectives, we work in teams comprised of civil, structural, mechanical, electrical, fire protection, industrial, energy, acoustics, and a variety of other specialty services. Our collaborative approach fosters innovation, technical excellence, and value-based solutions for our clients. It also makes Coffman a great place to work. Job Description Our mission is simple: To empower our team to deliver innovative engineering solutions focused on our clients’ success. As a Bridge Engineer at Coffman Engineers, you’ll be part of a collaborative, creative, and high-performing team that believes in making a difference for our clients and our communities. You’ll experience a culture where your growth and contributions truly matter. This position will assist in managing, designing, and detailing bridge projects of a variety of sizes and complexities. The candidate will have the ability to network with clients of a diverse culture of private, local, state, and federal agencies. The work is predominantly office based. However, some work in the field will be required at times. Working in a variety of environments with the appropriate safety procedures and equipment may include working at heights, confined spaces, near highway vehicle traffic and ariel lift platforms. Qualifications • A four-year degree in Civil/Structural Engineering with an emphasis in bridge engineering or a related field from an ABET accredited university, • Master’s Degree in Structural Engineering preferred., • Registration as an Engineer-in-Training (EIT), • 0-3 years of experience, • Internship in the structural design of bridges and/or buildings and similar structures preferred., • Successful completion of the following: structural/bridge engineering course work (preferred): Prestressed Design, Reinforced Concrete Design, Steel Design, Structural Dynamics or Earthquake Engineering, Foundation Design, Timber Design., • Experience with AASHTO Bridge Design Specifications and any Department of Transportation (WSDOT, IDT or ODOT) bridge design, bridge standard details, bridge design manuals or construction standards and protocols (preferred), • Experience with computer analysis software systems including AutoCAD, PGSuper, Risa 3D, MathCAD, and Bluebeam Revu (preferred), • Experience working as part of a multi-discipline design team (preferred), • Excellent leadership, supervisory, and writing and verbal communication skills This position is not eligible for sponsorship. Additional Information Why You Want to Work Here You could choose to work anywhere, so why work at Coffman Engineers? Because we are different – our culture sets us apart. Simply stated, we are a group of creative, high-performing people who like working together and believe that what we do makes a difference. Employees say that it feels like working with a group of friends in a small office while enjoying the benefits and perks of working for a large firm. Our culture is not the only thing that makes us different, but it drives everything we do. Coffman offers comprehensive benefits, including a flexible PTO program and a fun office environment. Our downtown Spokane office is located near RiverPark Square and close to a variety of shops and restaurants. Whether it is delivering the best possible service to our clients or competing in an office-wide ping-pong competition, we welcome the dedicated and the driven. Join us. Don’t take our word for it. Check out what others are saying: Glassdoor Reviews: Coffman at a Glance • 47 years in business, • 850+ employees serving clients throughout the U.S. and overseas from more than 23 locations, • Multi-discipline engineering services plus corrosion control, commissioning, and project/construction management, • #34 Top 80 Engineering Firms, Building Design + Construction, 2022, • #29 Zweig Group Hot Firm List, Zweig Group, 2021, • #157 Top 500 Design Firms, Engineering News-Record, 2023, 2024 You must apply online for this position. If you are unable to complete our online application process, or if you need assistance to do so, let us know so we can provide reasonable accommodation. If you are experiencing problems applying through our system, please try again using a different browser or an updated version of your current browser. If that doesn't work, please contact us directly. Equal Opportunity Statement This position is direct with Coffman Engineers; we are an Equal Opportunity Employer. We do not discriminate on the basis of any status protected under federal, state, or local law. Follow Us! Website: Twitter: @CoffmanEngineer Instagram: @CoffmanEngineers LinkedIn: Facebook: @CoffmanEngineers

Job DescriptionSalary: $90K-$150K DOE Company Background: Washington Equipment Manufacturing Company, Inc. (WEMCO, Inc.) is a contract manufacturer that specializes in the design, engineering, and manufacturing of productivity-enhancing solutions, such as overhead cranes for material handling, automated aerospace tooling, agricultural equipment, and custom machinery used in multiple industries around the world. WEMCOs facility is fully integrated with the capability to perform nearly all services in-house. This includes design, engineering, welding, machining, painting, assembly, testing, and installation of complex machinery. This is not a boring office job or consulting firm. Your designs will be built in-house by industry experts. Visit our website to view some of our work Job Purpose: As an Electrical Engineer, you will utilize computer-aided software to review, modify, and design electrical systems while simultaneously validating and improving the performance of electromechanical equipment and components. You will work under the direction of the company Vice President, and will join a team of mechanical, structural, and control systems engineers that continue to grow our company and expand our capabilities. Job Responsibilities: • Design and evaluate electromechanical systems by applying principles of mechanics, electrical systems, hydraulics, pneumatics, and other power systems, • Develop and review control systems by studying customer requirements, researching and testing manufacturing and assembly methods and materials, and soliciting observations from operators, • Interact with electrical engineers and staff members to identify, define, and resolve design or performance issues with products, • Create test procedures and provide technical assistance during equipment assembly and commissioning, • Execute technical assignments with the ability to integrate systems adhering to schedule and cost considerations, • Perform root cause analysis for failure investigations and other data analysis tasks, • Write periodic reports or presentations for customers on specific projects, • Conduct electrical progress work inspections on a continuous basis along with complete electrical installation checkout to ensure quality, codes, standards, and specifications are met before turnover, • Support technical coordination of lock-out/tag-out program activities, • Coordinate with Mechanical Engineers and craft workers to solve drawing issues or and provide information necessary for proper wiring or installation of electrical equipment, • Coordinate and fulfill procurement as needed for electrical panel and system fabrication and assembly, • Provide engineering information by answering questions and requests that are technical in nature, • Maintain product and company reputation by complying with government regulations, • Create and review O&M manuals for all designed equipment, • Provide tracking and reporting to help plan, develop, and mentor project teams on the implementation of recovery plans as necessary, • Develop and maintain constructive and cooperative interpersonal working relationships with others, • Create drawings for manufacturability using standard drafting practices within your assigned area, • Diagnose problems, order appropriate parts, and design solutions to remedy project complications, • Must maintain a clean driving record since you may be asked to drive a company vehicle at times, • Be willing to travel for short periods of time to manage project assignments, • Be willing to study and learn relevant industry standard requirements such asISO9001, AS9100, NCCCO, OSHA, ANSI, ASME, CMAA, AWS, IBC, ASCE, ASME,as well as any other related specifications needed to perform industry-accepted designs and equipment Job Requirements: • Bachelor of Science in Electrical Engineering, • Professional Engineering license in Electrical Engineering, • 3-5 years experience working in industrial automation, • Strong background in mechanical, hydraulic and pneumatic systems, • Strong AutoCAD skills, experience with Autodesk Inventor preferred, • Strong Programming Skills, • Must be able to work autonomously without direct oversight when necessary, • Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications, • Has or can acquire a US Passport with no travel restrictions Benefits: • 401KRetirement Plan, • Medical Insurance, • Dental Insurance, • Vision Insurance, • Supplemental insurance options through Colonial Life, • Paid Time Off, • Holiday Pay, • Employee Referral Program

Job Description KAYU-TV FOX 28 Spokane has an immediate opening for a motivated, versatile, and knowledgeable Assistant Chief Engineer to help manage technical operations across two DMA’s: Spokane, and Yakima/Tri Cities. The Engineer must be hands-on and capable of handling multiple tasks, sometimes under pressure and tight deadline restrictions. This position is primarily responsible for the day-to-day broadcast operations of broadcast equipment, on-site. Ideal candidate will: oversee employee safety and quality control; oversee equipment maintenance and system design; maintain computer networks and user experience; maintain transmitters and translators; and such other necessary tasks as required. The ideal candidate must have excellent communication and interpersonal skills. Organization and time management skills are a must. Position reports directly to the Chief Engineer and General Manager. QUALIFICATIONS: • Reliable, positive, and self-motivated individual with strong personal integrity., • Excellent verbal and written communication skills., • Capable of traveling to and maintaining transmitter and translator sites 24x7 (on-call), • Capable of handling multiple tasks., • Capable of meeting deadlines., • Proficient computer skills and able to operate MS Word, Excel, Power Point, Outlook, ENPS, Windows, adobe premiere pro, final cut pro, Mac, PC and other professional digital video broadcasting equipment., • Knowledge of FCC broadcast rules., • Knowledge and understanding of broadcast operations a plus., • Technical Degree in electronics or related field preferred., • Must have a valid driver’s license and good driving record., • Capable of lifting 50 lbs. JOB RESPONSIBILITIES INCLUDING BUT NOT LIMITED TO: • Responsible for the day-to-day maintenance of the broadcast operations., • Management of compliance with all regulatory and governmental agencies., • Management of station assets, information technology, transmitter facilities and building operations., • Responsible for ensuring superior broadcast operations., • Effectively strategize, build, and execute systems plans., • Responsible for building and maintaining engineering’s station operations budgets., • Strong computer, communication, and interpersonal skills., • Other tasks may be required.

Job DescriptionSalary: $70K-$95K per year Company Background: Washington Equipment Manufacturing Company, Inc. (WEMCO, Inc.) is a contract manufacturer that specializes in the design, engineering, and manufacturing of productivity enhancing solutions, such as: overhead cranes for material handling, automated aerospace tooling and parts, agricultural equipment, and custom machinery used in multiple industries around the world. Job Purpose: As a Controls Engineer, you will utilize computer-aided software to review, modify, and design electrical systems while simultaneously validating and improving the performance of electromechanical equipment and components. Job Responsibilities: • Assess project requirements and undertake relevant research, • Validate and improve the performance of electromechanical equipment and components, • Use computer-aided software to review, modify and design electrical systems, • Produce and implement designs and test procedures, • Present designs and participate in design reviews with managers and clients, • Design and evaluate electromechanical systems by applying principles of mechanics, electrical systems, hydraulics, pneumatics, and other power systems., • Develop and review control systems by studying customer requirements, researching and testing manufacturing and assembly methods and materials, and soliciting observations from operators, • Interact with electrical engineers and staff members to identify, define, and resolve design or performance issues with products., • Troubleshooting issues with hardware, software, and programming, • Contribute to constant upgrading of product documentation and technology, • Direct and technically assist during equipment installation or assembly, • Design, improve and troubleshoot custom-built automation systems for machines and equipment, • Develop, implement, and sustain policies and procedures for the electrical work performed in the production facility and field, • Lead integration of new PLC systems and automation equipment., • Develop, test, and validate programs for a wide variety of equipment systems., • Execute technical assignments with the ability to integrate systems adhering to schedule and cost considerations, • Provide technical support for our manufacturing facility and field equipment in assigned areas of responsibility, • Perform root cause analysis for failure investigations and other data analysis tasks, • Write periodic reports or oral presentations to management and customers on specific projects, • Work with customers to develop and qualify process changes and provide technical services, • Oversee and coordinate performance and routine activities of electrical field engineering personnel., • Conduct electrical progress work inspections on a continuous basis along with complete electrical installation checkout to ensure quality, codes, standards and specifications are met before turnover., • Commission machines and equipment in house and in the field, • Coordinate and record client, as well as vendor, needed electrical installations and test verifications., • Support technical coordination of tag-out and lock-out program activities., • Coordinate with Electrical Engineers and crafts to solve drawing issues or and provide information necessary for proper wiring or installation of electrical equipment., • Coordinate and check subcontractors in electrical field engineering., • Coordinate and fulfill procurement as needed for electrical panel and system fabrication and assembly., • Coordinate with vendors performing electrical services or panel fabrication., • Issue Purchase Orders for materials and components needed on control systems and general equipment., • Provide engineering information by answering questions and requests that are technical in nature., • Maintain product and company reputation by complying with government regulations, • Create and review O&M manuals for all designed equipment, • Provide tracking and reporting to help plan, develop, and mentor project teams on the implementation of recovery plans as necessary, • Develop and maintain constructive and cooperative interpersonal working relationships with others, • Create drawings for manufacturability using standard drafting practices within your assigned area, • Diagnose problems, order appropriate parts, and design solutions to remedy project complications, • Must maintain a clean driving record since you may be asked to drive a company vehicle at times, • Be willing to travel for short periods of time to manage project assignments, • Be willing to study and learn relevant industry standard requirements such asISO9001, AS9100, NCCCO, OSHA, ANSI, ASME, CMAA, AWS, IBC, ASCE, ASME,as well as any other related specifications needed to perform industry-accepted designs and equipment Job Requirements: • Minimum of 2 years experience in the design, development, and implementation of control systems including PLC programming, • Minimum of 5 years experience or education in electrical controls systems, • Bachelors Degree in Mechanical or Electrical Engineering or a closely-related field is required, • Prior experience using Autodesk Inventor is preferred, • Prior experience with Microsoft Office products: Excel, Word, Outlook, • Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications, • Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models, • Ability to effectively communicate with co-workers, customers, and suppliers, • Must demonstrate a strong work ethic and the ability to complete tasks without constant supervision, • Strong problem-solving skills, • Strong attention to detail, • Must have good time management and organizational skills, • Must meet ITAR requirements for employment Benefits: • 401KRetirement Plan, • Medical Insurance, • Dental Insurance, • Vision Insurance, • Supplemental insurance options through Colonial Life, • Paid Time Off, • Holiday Pay, • Employee Referral Program

Job DescriptionCompany Description At Coffman Engineers, we serve as both prime consultant and subconsultant on projects large and small. The markets we serve include commercial, institutional, government, industrial, healthcare, energy services, and more. Incorporated in 1979, we have employees in more than 23 locations serving clients across the United States and overseas. Our broad range of markets, clients, and services, coupled with industry-leading talent, provides unique and exciting opportunities to grow as professionals, serve clients, and make a difference in our communities. To meet client objectives, we work in teams comprised of civil, structural, mechanical, electrical, fire protection, industrial, energy, acoustics, and a variety of other specialty services. Our collaborative approach fosters innovation, technical excellence, and value-based solutions for our clients. It also makes Coffman a great place to work. Job Description Coffman Engineers is seeking a Bridge Engineer (three to five years) for employment in our Spokane office. Our primary marketplace is Washington, Oregon, and Idaho with other potential opportunities across the United States. The successful candidate will be independent, self-motivated, energetic team player who is looking for a challenging and rewarding opportunity within a dynamic and progressive firm. This position will assist in managing, designing, and detailing bridge projects of a variety of sizes and complexity. The candidate will have the ability to network with clients of a diverse culture of private, local, state, and federal agencies. The work is predominantly office based. However, some work in the field will be required at times. Working in a variety of environments with the appropriate safety procedures and equipment may include working at heights, confined spaces, near highway vehicle traffic and ariel lift platforms. Qualifications • A four-year degree in Civil/Structural Engineering with an emphasis in bridge engineering or a related field from an ABET accredited university., • Master’s Degree in Structural Engineering preferred., • Registration as a Professional Engineer (PE) preferred., • 3-5 years of experience with bridge design, seismic assessment, in-service inspection, bridge load ratings, repairs, and rehabilitations., • A BSCE degree with emphasis in bridge/structural engineering. MSCE preferred with emphasis in bridge/structural engineering., • Experience with AASHTO Bridge Design Specifications and any Department of Transportation (WSDOT, ITD or ODOT) bridge design, bridge standard details, bridge design manuals or construction standards and protocols preferred., • Experience with computer analysis software systems including AutoCAD, PGSuper, Risa 3D, MathCAD, SI Software including SAP and CSI Bridge and Bluebeam Revu preferred., • Strong technical and organizational skills., • NHI Bridge Inspection Certification preferred., • Experience working as part of a multi-discipline design team preferred., • Experience as a project manager preferred., • Excellent leadership, supervisory, and writing and verbal communication skills, • Self-motivated and eager to learn. Additional Information Why You Want to Work Here You could choose to work anywhere, so why work at Coffman Engineers? Because we are different – our culture sets us apart. Simply stated, we are a group of creative, high-performing people who like working together and believe that what we do makes a difference. Employees say that it feels like working with a group of friends in a small office while enjoying the benefits and perks of working for a large firm. Our culture is not the only thing that makes us different, but it drives everything we do. Coffman offers comprehensive benefits, including a flexible PTO program and a fun office environment. Our downtown Spokane office is located near RiverPark Square and close to a variety of shops and restaurants. Whether it is delivering the best possible service to our clients or competing in an office-wide ping-pong competition, we welcome the dedicated and the driven. Join us. Don’t take our word for it. Check out what others are saying: Glassdoor Reviews: Coffman at a Glance • 47 years in business, • 850+ employees serving clients throughout the U.S. and overseas from more than 23 locations, • Multi-discipline engineering services plus corrosion control, commissioning, and project/construction management, • #34 Top 80 Engineering Firms, Building Design + Construction, 2022, • #29 Zweig Group Hot Firm List, Zweig Group, 2021, • #157 Top 500 Design Firms, Engineering News-Record, 2023, 2024 You must apply online for this position. If you are unable to complete our online application process, or if you need assistance to do so, let us know so we can provide reasonable accommodation. If you are experiencing problems applying through our system, please try again using a different browser or an updated version of your current browser. If that doesn't work, please contact us directly. Equal Opportunity Statement This position is direct with Coffman Engineers; we are an Equal Opportunity Employer. We do not discriminate on the basis of any status protected under federal, state, or local law. Follow Us! Website: Twitter: @CoffmanEngineer Instagram: @CoffmanEngineers LinkedIn: Facebook: @CoffmanEngineers

Job DescriptionSalary: $80,168.40 - $105,000 Company Background: Washington Equipment Manufacturing Company, Inc. (WEMCO, Inc.) is a contract manufacturer that specializes in the design, engineering, and manufacturing of productivity-enhancing solutions, such as overhead cranes for material handling, automated aerospace tooling and parts, agricultural equipment, and custom machinery used in multiple industries around the world. WEMCO, Inc. was founded on the principles of innovative design and quality workmanship, and our founding partners have more than 70 combined years of experience as welders, fitters, engineers, and heavy machinery designers. WEMCO, Inc.s facility is fully integrated with the capability to perform nearly all services in-house. Our current capabilities include design, engineering, welding, machining, painting, assembly, testing, and installation of complex machinery. Job Purpose: As a Mechanical Engineer, your main purpose will be to design, develop, and test all aspects of mechanical components, equipment, and machinery. You will apply your knowledge of engineering principles to design products such as cranes, material handling equipment, controls, machines, etc. Job Responsibilities: • Assess project requirements, • Measure the performance of mechanical components, devices, and engines, • Use computer-aided design/modeling software, • Undertake relevant research, • Produce and implement designs and test procedures, • Present designs to managers and clients, • Analyze and interpret data, • Design and evaluate mechanical and electromechanical systems by applying principles of mechanics, electrical systems, hydraulics, and materials, • Develop mechanical and electromechanical products by studying customer requirements, researching and testing manufacturing and assembly methods and materials, and soliciting observations from operators, • Develop manufacturing processes by designing and modifying equipment for fabricating, building, assembling, and installing components, • Assure system and product quality by designing testing methods, testing finished product and system capabilities, confirming fabrication, assembly, and installation processes, • Prepare product reports by collecting, analyzing, and summarizing information and trends, • Provide engineering information by answering questions and requests, • Maintain product and company reputation by complying with government regulations, • Create and review O&M manuals for all designed equipment, • Provide tracking and reporting to help plan, develop, and mentor project teams on the implementation of recovery plans as necessary, • Develop and maintain constructive and cooperative interpersonal working relationships with others, • Create drawings for manufacturability using standard drafting practices, • Diagnose problems, order appropriate parts, and design solutions to remedy project complications, • Complete small quotes and customer proposals that are assigned to you by upper management, • Must maintain a clean driving record since you may be asked to drive a company vehicle at times, • Be willing to travel for short periods of time to manage project assignments, • Be willing to study and learn relevant industry standard requirements such asISO9001, AS9100, NCCCO, OSHA, ANSI, ASME, CMAA, AWS, IBC, ASCE, ASME,as well as any other related specifications needed to perform industry-accepted designs and equipment Job Requirements: • At least 5 years of experience as a mechanical engineer/designer(crane & equipment design experience preferred), • Bachelors Degree in Mechanical Engineering, • Experience using Autodesk Inventor is preferred, • Experience with Microsoft Office products: Excel, Word, Outlook, • Proficient use of arithmetic, algebra, geometry, calculus, statistics, and their applications, • Understanding of design techniques, tools, and principles involved in the production of precision technical plans, blueprints, drawings, and models, • Ability to effectively communicate with co-workers, customers, and suppliers, • Must demonstrate a strong work ethic and the ability to complete tasks independently with minimal supervision, • Strong problem-solving and decision-making skills, • Strong attention to detail, • Must have good time management and prioritization skills with the ability to meet deadlines, • Must be able to pass a background check Benefits: • 401k Retirement Plan with up to 4% employer match, • Medical Insurance, • Dental Insurance, • Vision Insurance, • Supplemental Insurance options through Colonial Life, • Paid Time Off, • Holiday Pay, • Employee Referral Program

Job Description Mechanical Systems Engineer The Mechanical Systems Engineer is responsible for improving the reliability, performance, and longevity of critical mechanical equipment throughout the foundry. This role focuses on diagnosing equipment failures, performing technical analysis of breakdowns, and developing permanent corrective solutions that improve uptime and reduce recurring maintenance issues. Unlike a traditional design engineering role, this position is highly hands-on and closely integrated with plant operations. The engineer works directly with maintenance technicians and production teams to investigate failures, evaluate equipment performance, and implement mechanical improvements. The goal of the position is to replace reactive, temporary repairs with structured engineering solutions that improve equipment reliability and operational stability. The Mechanical Systems Engineer will analyze mechanical systems such as furnaces, conveyors, cranes, mold handling equipment, vibration systems, hydraulics, and other critical foundry machinery. Through root cause analysis and engineering evaluation, this role will identify the underlying causes of equipment failures and develop practical solutions that can be implemented by the maintenance team. Responsibilities • Investigate mechanical equipment failures and perform structured root cause analysis to determine underlying causes, • Work directly with maintenance teams to diagnose breakdowns and evaluate damaged components, • Develop permanent corrective actions that prevent recurring failures, • Evaluate mechanical systems including furnaces, conveyors, cranes, hydraulic systems, vibration equipment, and material handling systems, • Identify weak points in existing equipment designs and develop mechanical improvements or modifications, • Support maintenance teams by providing technical guidance during major repairs and troubleshooting efforts, • Develop documentation and repair standards to improve consistency of maintenance practices, • Analyze equipment performance trends to identify opportunities for reliability improvements, • Assist in the installation, commissioning, and optimization of new equipment or system upgrades, • Ensure that equipment repairs and modifications maintain safety and regulatory compliance Minimum Qualifications • Bachelor’s degree in Mechanical Engineering or a closely related discipline, • Strong understanding of mechanical systems including rotating equipment, structural loads, hydraulics, and power transmission, • Experience troubleshooting mechanical equipment failures in an industrial or manufacturing environment, • Ability to perform root cause analysis and develop corrective actions, • Willingness to work directly with maintenance teams on the production floor Preferred Qualifications • Experience working in heavy manufacturing, foundries, steel mills, mining, or similar industrial environments, • Experience with vibration analysis, failure analysis, or reliability engineering, • Knowledge of welding, fabrication, and industrial repair practices, • Familiarity with maintenance systems, preventive maintenance planning, or reliability programs Key Skills Strong analytical and problem-solving skills are essential for diagnosing mechanical failures and identifying the true causes of equipment breakdowns. This role requires the ability to translate engineering analysis into practical repair solutions that can be implemented in a production environment. The engineer must also communicate effectively with maintenance technicians and production personnel to ensure that improvements are understood and properly executed.

Job DescriptionDescription: Wagstaff manufactures equipment for aluminum producers, who process formed aluminum into parts and products you use every day. Pay: $23.50 - $31.00 per hour Work Location: Onsite in Spokane Valley, WA As an employee of Wagstaff, you’ll enjoy: Paid non-working holidays Monthly, site-wide BBQs Up to 8% retirement contribution Annual bonus program 1200 Sqft onsite gym, accessible 24/hrs a day Family-friendly, company-wide events To review our full benefits summary, please visit Want to learn more about Wagstaff? Join us for a virtual tour! Job Summary Apply mechanical design knowledge to the design development and production of Wagstaff casting equipment. Primary Job Responsibilities • Become familiar with Wagstaff equipment, associated design criteria, design tools, and business software with respect to a limited number of products/areas of standard complexity. Apply this knowledge to the design of equipment as assigned, • Create design documents necessary for equipment production according to documented design procedures and as directed by the responsible Engineer(s), • Update and revise mechanical drawings per instructions from design reviews, redlines, NPR tags, etc., • Prepare and release design documents to Manufacturing, • Become proficient at estimating hours to complete design tasks, • Become proficient at meeting goals with respect to planned hours and production schedule, • Become proficient at interfacing with Purchasing, Demand Management, and shop floor personnel as required to effectively design and support the manufacturer of equipment as required, • Keep equipment and work area clean and orderly, • Abide by company policies, • In order to achieve business objectives, work weeks in excess of 40 hours may be required, • Train other team members in support of basic departmental processes and equipment design methods, • Other duties as assigned Requirements:, • AA or AS Degree in Engineering Technological field or equivalent experience, • Acquires basic knowledge and develops skills in a limited number of specific practice areas, • Applies prescribed and/or standard techniques and procedures in accordance with established criteria to perform assigned tasks, • Exercises limited judgment on details of work and in application of standard methods for conventional work, • Works on products of standard complexity or portions of projects, • Designs a complete system, component, or process of standard complexity, • Acquires an understanding of standard business tools and their application to assigned tasks, • Prepares complete project documents related to a limited number of specific products/areas, • Receives specific direction on assigned tasks, and general review of all aspects of work While performing the duties of this job, work is performed primarily in an adequately lit, well ventilated, climate controlled general office environment. Close computer work is regularly required. The work usually involves minimal physical exertion. The noise level in the general office environment is usually moderate. This job may require occasional or more frequent interaction with employees on the manufacturing shop floor. While on the shop floor, the employee may be exposed to fumes, airborne particles, toxic or caustic chemicals, risks of moving equipment and parts, and other risks associated with a manufacturing environment. Because of this environment and associated risks, coordination with shop floor managers/employees may be necessary before entering the shop floor, and use of job appropriate personal protective equipment and clothing is required on the shop floor. The noise level on the shop floor is often loud. Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff. Wagstaff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. PM22

Job DescriptionJob Title: HVAC Sales Engineer Job Location: Spokane WA Pay Rate: $80-130k base plus commission Operating Company: Dorse & Company FLSA Status: Exempt About: Dorse & Company - A member of the AIR Control Concepts family. Dorse and Company represents the leading manufacturers in the air movement industry in Washington State. We specialize in supplying our customers with high quality mechanical HVAC products designed to provide cost-effective, and long-term trouble-free service. Our product offerings are the foundation of design for consulting engineers and the design-build community alike. Our company has been in business for over 55 years and has continued to grow. Check out our website: Dorse & Company - HVAC Distributor Job Description: The HVAC Sales Engineer will focus on the technical promotion of the products represented by Dorse & Co. and will strive to have our products as the basis of design in construction documents. This position will interface with consulting mechanical engineers, architects, building owners, facility managers, end users, and other entities as deemed appropriate to achieve the basis of design. The ability to educate others regarding product characteristics, performance, and selection is essential. The Engineer will work together with the sales team during bid and project submittal process to ensure project success. This position is based in Spokane, WA with remote work flexibility available. We welcome early‑career engineers and candidates with strong, transferable technical skills from adjacent industries. HVAC exposure is valuable, and applicants with foundations in electrical, plumbing/pipefitting, building automation systems, solar, pneumatics/hydraulics, or similar disciplines are encouraged to apply. We aren’t just a parts supplier. Dorse is an HVAC manufacturer representative and a wholesale distribution company servicing mechanical engineers, contractors, and building owners. With a complete understanding of the construction life cycle, we’ve built specialized teams to deliver exactly what our customers need at exactly the right time. From HVAC project estimating at any stage through ordering to parts tracking and delivery, our pride in a job well done is priority number one. Essential Duties and Responsibilities: • Maintain competency across all represented product lines; develop specialization where appropriate., • Provide equipment selections for designers based on specific application requirements., • Communicate accurate, timely product information to all stakeholders., • Contribute ideas for product promotion and market growth initiatives., • Lead engineering appointments and training lunches., • Visit job sites or owner facilities to develop solutions or resolve field challenges., • Travel with engineers or customers to manufacturer’ trainings and seminars., • Bachelor’s Degree in Mechanical Engineering or a related engineering/technical discipline., • Strong mechanical/technical aptitude and a desire to deepen knowledge in HVAC, air movement, and air control devices., • Proficiency with word processing, spreadsheets, presentation tools, and equipment‑specific software., • Clear, confident communication skills with the ability to educate others on product characteristics and performance.Preferred Experience –, • 3+ years of experience in HVAC design or relevant technical experience in adjacent industries (e.g., electrical, plumbing/pipefitting, building automation systems, solar/renewables, pneumatics/hydraulics, or other applied mechanical systems). Benefits: We offer a competitive and comprehensive benefits package, including: • 401(k) with employer match (immediate vesting), • Medical – HDHP & PPO options, Dental and Vision, • HSA with employer matching contributions, • FSA & Limited FSA, • Employer Paid Life/AD&D Insurance, • Voluntary Life Insurance Plans, • Paid Family Leave, • PTO, • Paid Company Holidays – 10 Days, • Employer Paid Short-term Disability, • Long-term Disability, • Referral Bonus Opportunities 58g5KnjJSr

Job DescriptionENGINEERS | SURVEYORS | PLANNERS | SCIENTISTS Morrison-Maierle is a 100% employee-owned firm specializing in integrated consulting and design services in engineering, planning, surveying, and science. As a trusted partner to our clients, we deliver reliable, high-quality results, grounded in a deep understanding of local context and regional needs. Position: Mechanical Engineer (HVAC & Plumbing) Job Status: Exempt-salaried Location: Spokane, WA (Relocation assistance provided) TOTAL REWARDS We know work is just one part of life. That's why we offer a total rewards package designed to support you—at work, at home, and everywhere in between. As an employee-owner, you'll receive competitive pay, bonuses that recognize your contributions, and benefits that promote your health, growth, and well-being. • $90,000-$125,000 base pay (DOE) with generous wage growth, • Annual bonuses because your contributions matter, • Ownership through our Employee Stock Ownership Plan (ESOP); 100% company-paid ownership contributions, • 90% company-paid shared health plan premiums, • Paid time off in year one for the things you love to do, • Paid parental leave and volunteer time off, • Six paid company holidays, • Two floating personal holidays for events that are important in your life, • 401(k) matching program, • AD&D Insurance, Short/Long Term Disability, and Life Insurance paid by the company, • Interpreting the architectural design plans and researching appropriate HVAC and plumbing systems to fit the scope of the project., • Designs the heating, cooling, and plumbing systems to integrate and support the architectural building plan., • Apply mechanical engineering principles such as thermodynamics, fluid mechanics, materials science, and structural analysis principles within design work., • Understand different engineering disciplines within the project and how the mechanical engineering piece will/can impact different design elements., • Leverage engineering design software to draft plans, drawings, and models., • Incorporate the appropriate equipment to support the building's HVAC and plumbing needs., • Creatively find ways to design engineering projects in challenging spaces., • At times, in partnership with the operations manager, develop new client business and win new project work. "As employee-owners, we don't just work here, we grow here. Together, we take on challenging projects, support one another, and create opportunities to thrive. Our culture empowers every team member to find success—professionally and financially—while building something greater than themselves." – Arian Bloomfield, President/CEO YOUR STRENGTHS • Bachelor's degree in mechanical engineering from an ABET-accredited engineering program, • Minimum of 4+ years' mechanical engineering experience with HVAC & plumbing design in a range of various building applications, • Engineer-In-Training (EIT) professional licensure required, • Professional Engineering (PE) licensure preferred or willing to obtain soon after hire, • Proficiency with REVIT engineering design software, • Project management experience leading tasks or projects, • In-depth knowledge of HVAC systems., • Familiarity with basic plumbing and electrical systems, • Strong communication, both verbal and written Morrison-Maierle is not accepting third-party or recruitment agency solicitation requests. Morrison-Maierle is committed to diversity and inclusion, supported by compliance as an EEOC employer that ensures equal opportunities for all applicants regardless of protected class status.

Job Description Job Summary: Responsible for ensuring the success of live events by performing the technical aspects related to live event audio. The FOH Engineer is responsible for managing all sound equipment and sound engineering of the show; Oversees the set-up and maintenance of all the sound equipment to ensure sound is of the highest quality; Assist in all aspects of audio production as well as assisting in other various aspects of event production when needed. Key Duties and Responsibilities: These functions are intended as a general illustration of the work performed in this job classification and are not all inclusive for this position • Operate audio control board., • Operate, maintain, and troubleshoot all RF and audio equipment as well as computers and backups required for these systems., • Check, clean, repair, test, and set up wireless microphones and related systems., • Mix show sound., • Learn and perform multiple cue tracks., • Test all "SMPTE" time code interaction with video and lighting., • Complete daily pre-show line checks and testing of all RF units., • Perform daily set up, tear down, boot up and boot down of all sound related equipment., • Maintain daily, weekly, and monthly maintenance as required. Including all cables, patches and equipment., • Maintain DB levels required for the show space., • Attend all scheduled sound checks, during which, the A2 will talk to the performers to determine exactly what type of sound they desire., • Work with other venue sound personnel as needed, such as lobby sound needs., • Maintain a clean and orderly working environment at all times., • Communicate updates and issues to applicable stakeholders., • Serve as primary troubleshooting and venue contact for audio including updating hardware, software, and equipment firmware and loading and programming content for events., • Assist in emergency procedures., • Mix monitors, when necessary., • Perform other duties as assigned. General Conditions • Willing and able to work evenings, late nights, weekends and holidays in a high profile and high-stress environment., • Demonstrate excellent time management, problem-solving, and organizational skills., • Demonstrate strong verbal and written communication skills., • Demonstrate ability to effectively handle multiple tasks simultaneously., • Demonstrate positive attitude and ability to effectively collaborate with others., • Demonstrate personal initiative and resourcefulness; ability to act and resolve needs independently., • Demonstrate ability to deliver excellence with minimal supervision and/or direction. Job Qualifications • High school diploma or GED. Extensive related work experience may be considered in lieu of educational requirement., • At least five (5) years of experience directly related to the duties and responsibilities specified for a live music venue, including live mix, sound reinforcement, AV broadcast and/or music production., • Possess a musical background, experience in multi-track audio recording and/or professional audio systems., • Possess working familiarity with the Midas Heritage D audio desk., • Experience operating a medium sized sound reinforcement system., • Proficiency using Microsoft Office Suite applications, Digital console controls, Avid Pro Tools (or similar music software), and Waves Tracks Live (or similar multitrack recording software). Physical Demands: The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be considered to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the team member is regularly required to sit; stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl; ascend or descend ladders, stairs, scaffolding, ramps, poles; maintain body equilibrium to prevent falling when walking, standing, crouching, or navigating narrow, slippery, or erratically moving surfaces; bend body downward and forward by bending spine and legs; talk or hear. This job is active in nature. Must be able to stand for long periods while performing various duties. Moderate to heavy lifting (25 - 100 pounds) required. Specific hearing and vision abilities required by this job; Work in an environment with moderate to loud noise level, extreme lighting changes, strobes & moving lights; Able to wear a radio earpiece during the scheduled shift.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact: Pearce is seeking a detail-oriented and experienced OSP Engineer to support telecommunications infrastructure projects. This role focuses on the design, planning, and implementation of outside plant (OSP) projects involving copper and fiber networks. The ideal candidate will have a strong background in engineering, permitting, and construction coordination, along with the ability to manage budgets and ensure compliance with company and industry standards. Core Responsibilities: Engineering & Design * Design and plan outside plant facilities for copper and fiber infrastructure (aerial, buried, conduit). * Prepare and review engineering drawings, loop loss calculations, and switch serving area designs. * Conduct field measurements for poles, conduits, and buried facilities to support network design. * Develop project budgets, monitor actual costs, and conduct job inspections for quality assurance. Permitting & Compliance * Prepare, organize, and submit permit packages to relevant agencies (Township, County, State, DNR, Railroad, Pipeline, etc.). * Ensure designs meet permitting regulations and engineering standards. Field Coordination * Meet with municipal and government officials to coordinate around road projects (travel required; mileage reimbursed). * Collaborate with other utilities to coordinate relocations, minimize conflicts, and avoid project delays. * Support service orders, subdivision expansions, road relocations, dark fiber MDUs, and more. * Update FROGS (CAD), Varasset, and SiteTracker tools as required. Project & Construction Support * Coordinate with SSP contractors to ensure timely and budget-conscious project completion. * Assist with make-ready work and joint-use coordination for Ziply-owned poles. * Conduct site surveys, support PUC complaint investigations, and create capital projects (e.g., for cell towers or plant repairs). * Address and resolve plant damage requests (DOR/PDR), cable count changes, and other network service needs. Administrative Support * Maintain records, update engineering files, and process departmental documentation. * Draft and type correspondence, reports, and engineering support documents. Core Experience: * 3–5+ years of hands-on experience in copper and fiber optic network engineering. * Minimum 5 years in network engineering or OSP-related work, including permitting and fiber record management. * Strong project management and organizational skills with the ability to handle multiple projects simultaneously. * Proficiency in Ziply engineering tools and systems, including FROGS, Varasset, and SiteTracker. * Skilled in communication and collaboration with municipal officials, utility companies, contractors, and cross-functional teams. * In-depth knowledge of permitting procedures and OSP construction practices. * Willingness to travel locally for fieldwork and meetings (mileage reimbursed). • Preferred candidates located in the Pacific Standard Time (PST) zone. Highly qualified candidates in the Mountain Standard Time (MST) zone may also be considered. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$36—$38 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

Job Description Our client – a global and growing BioPharma CDMO company needs a Sr. Manager of Engineering at their expanding plant in WA state, Excellent total comp. Up to $250K+ with good Benefits + Relocation Bonus. Job Posting # 2707R Job Title: Engineering Sr. Manager / Associate Director (See Note 3) – Pharma Aseptic Filling Location: Spokane, WA Overnight Travel: 10% Relocation: The client offers a lumpsum bonus for relo assistance. Compensation: Salary range up to $215K base + Annual Bonus (15%) Full Benefits: Medical, Vision, Dental, 15 days’ vacation/Sick time, 10 - Holidays, 401k (match up to 4%). Company Info: Our client is a growing CDMO company in the Pharmaceutical Industry. They are a part of a global parent company with sites in many countries including around 1,300 people at this site in Spokane, WA. This is an integrated contract development and manufacturing organization (CDMO) offering specialized Aseptic Sterile manufacturing, filling and lyophilization of drug products in Vials. Group Info: Lead the Engineering group supporting the existing and expansion site in Spokane, WA. The group will have around 22 engineers reporting to this role including Manufacturing Engineering, Automation, Project Engineers/Managers, Reliability. These 3 groups are separate and will not report to this role – Validation, Maintenance, Facilities Note1: The company recently completed their 3rd state-of-the-art Sterile Liquid compounding & Vial Filling line and are expanding again with a 4th line at this site. Note 2: This is a hands-on role and the manager is expected to lead the team by example and perform some strategic engineering work and also lead this group. He will report to the Sr. Director of Engineering. Note 3: This role can be top graded to an Associate Director for the right person with this level of experience Summary: The Sr. Engineering Manager – Assoc. Director will lead a team of technical professionals responsible for the design, installation, qualification, and ongoing operational improvement of state-of-the-art aseptic filling equipment for liquid and lyophilized pharmaceutical products. This role ensures compliance with cGMP, regulatory requirements, and industry best practices while driving reliability, innovation and efficiency in sterile manufacturing operations. Job Description: • Project Leadership:, • Manage end-to-end engineering projects for aseptic filling systems, isolators, lyophilizers, and component preparation equipment including concept design, procurement, installation, commissioning, and qualification., • Develop and maintain project timelines, budgets, and resource plans., • Design & Specifications:, • Define technical requirements for filling lines, filling assemblies, isolators, lyophilizers, component preparation equipment, product and diluent vessels and associated SCADA components., • Collaborate with cross-functional teams (Manufacturing, Quality, Validation) to ensure equipment meets process and regulatory needs., • Installation & Qualification:, • Oversee equipment installation and integration into existing facilities., • Lead IQ/OQ/PQ activities in alignment with validation protocols and regulatory standards., • Compliance and Documentation:, • Ensure adherence to global regulatory requirements and guidelines for aseptic processing and regulatory standards., • Prepare and review engineering documentation, including URS, FAT/SAT reports, and qualification protocols., • Own equipment related deviation and CAPA investigation and remediation., • Team Management:, • Supervise and mentor a team of 10 technical engineers, • Foster a culture of safety, quality, and continuous improvement., • Vendor Management:, • Quality, select and manage equipment suppliers and contractors., • Bachelor's degree in a technical & related field., • 8+ years in pharmaceutical engineering, • 3+ years in pharmaceutical aseptic filling, • 3+ years of Engineering Department Management experience, • Bachelor’s degree in Engineering - Mechanical, Manufacturing, Industrial, Pharmaceutical, • Advanced degree in Engineering or MBA, • PMI certification in Project Management Professional – PMP, • Professional Engineer – PE License, • Automation experience using Rockwell PLC/HMI/SCADA systems, • Experience working in a fast-paced Pharma Contract Manufacturing Organization (CDMO), • Certifications in any of the following:, • ISPE GAMP Essentials, • ISPE Good Engineering Practices, • ISPE Biopharmaceutical Essentials, • Parenteral Drug Association Aseptic Processing, • Parenteral Drug Association Annex 1, • Parenteral Drug Association Manage your Isolator for Aseptic Processing, • PMI Project Management Professional

Job DescriptionCentury West Engineering, a premier Northwest engineering consulting firm, is looking for an Electrical Engineer to join our team. As an Electrical Project Engineer, you will work on a variety of municipal projects including public and private projects involving water systems, wastewater systems, street improvements, and park improvements. The qualified candidate will provide excellence in the design of electrical systems and integrate these designs to deliver a combined package. We are looking for a candidate who enjoys problem solving, working smart and hard on important projects, in collaborative teams with multiple stakeholders, and who has a proven record of getting results. This position will report to the Electrical Department Manager and may be located in our Coeur d’Alene, Idaho, Spokane, Washington, or Sandpoint, Idaho offices. Benefits: • 2 to 4 weeks of vacation depending on experience, • 1 hour of sick leave for every 30 hours worked, • 8 paid holidays, • 3 days paid bereavement leave, as needed, • 401k retirement account match, • Health (PPO and HSA options), dental, and vision insurance fully covered for full-time employees and available for family and dependents, • Life and disability insurance, • Employee assistance program, • Bonus program, • Professional training and development opportunities, • Reimbursement for continuing education, • Flexible scheduleDuties and Responsibilities:, • Develop electrical site plans, electrical plan drawings, lighting plan drawings, one-line diagrams, wiring diagrams, network diagrams, electrical equipment layout and elevation drawings, electrical schedules, P&IDs, and prepare electrical specifications, • Prepare and review electrical construction cost estimates, • Coordinate with and review design work from other engineers and technicians, • Provide submittal reviews and electrical construction oversite, • Review project scope and estimates, • Bachelor’s degree in electrical engineering or appropriate discipline, • Professional Electrical Engineer in Idaho or Washinton, or ability to apply for reciprocity, • Have 4+ years of relevant experience in power systems, lighting, and control systems, • Proficient with Microsoft Office Suite, Adobe Acrobat, and Bluebeam Revu, • Experience with design/knowledge related to PLCs, MCCs, VFDs, Standby Power Systems, and SCADA systems preferred, • Experience with power analysis software (ETAP, SKM, EasyPower) and lighting analysis software (Visual, Agi32) preferred An Equal Opportunity Employer – All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected status.

Job Description Classification: Non-Exempt Pay: $22-24/hr. Schedule: Monday- Friday, 4:00 AM-12:00 PM. Some Saturdays and holidays included. This is a safety sensitive position. We are Alsco Uniforms. We’ve been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It’s our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We’re seeking driven professionals with ambition to grow within our company. We’d love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Essential Functions: • Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems., • Troubleshoots electrical issues., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Looks for opportunities to continually improve maintenance processes., • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers’ manuals to determine correct operation of machinery., • Proficient in reading electrical schematics., • Maintains accurate and timely records of maintenance performed., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver’s license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230-volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management, • High school graduate or equivalency preferred., • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022

Job DescriptionSummaryOur client is a leading IT Solutions Company (MSP - Managed Services Provider) located in Spokane, WA and they are in need of a IT Support Engineer / Level III Technician, who is proficient in networking. A qualified candidate would have both proven experience with technology and outstanding personal communication skills. You should enjoy building solutions that leverage technology to meet a clients business needs. Duties & Responsibilities • Workwith sales to provide pre- and post-sales support, including tasks such as discovery meetings, site visits, proposals and presentations, technical assessments, implementation, and ongoing technical account management., • Deploying and managing Windows Servers and Active Directory, • Designing Local Area Networks, • Implementing and monitoring network security, • Optimizing and maintaining network software and hardware, • Building and deploying file servers and cloud computing solutions, • Configuring and deploying VOIP solutions, • Performing network infrastructure troubleshooting, • Manage Microsoft Exchange Server, • Telephone solutions, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response., • New User On-boardingQualifications & Requirements, • Minimum of 4years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • Three years of experience in a client-facing environment such as sales engineering, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management), • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plus, • MUST have worked in an MSP environment is a major plus.Ideal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert)

Job DescriptionSummaryOur client is a leading IT Solutions Company (MSP - Managed Services Provider) located in Spokane, WA and they are in need of a IT Support Engineer / Level III Technician, who is proficient in networking. A qualified candidate would have both proven experience with technology and outstanding personal communication skills. You should enjoy building solutions that leverage technology to meet a client’s business needs. Duties & Responsibilities • Work with sales to provide pre- and post-sales support, including tasks such as discovery meetings, site visits, proposals and presentations, technical assessments, implementation, and ongoing technical account management., • Deploying and managing Windows Servers and Active Directory, • Designing Local Area Networks, • Implementing and monitoring network security, • Optimizing and maintaining network software and hardware, • Building and deploying file servers and cloud computing solutions, • Configuring and deploying VOIP solutions, • Performing network infrastructure troubleshooting, • Manage Microsoft Exchange Server, • Telephone solutions, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response., • New User On-boardingQualifications & Requirements, • Minimum of 4 years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • Three years of experience in a client-facing environment such as sales engineering, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management), • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plus, • MUST have worked in an MSP environment is a major plus.Ideal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert)

Description Leidos Engineering has an opportunity for a Lead EPC Substation Project Engineer. This position will be part of our unique and fast-growing EPC Solutions group, which sits within our Power Delivery Solutions division that provides consulting services to both public-owned and investor-owned electric utilities. These consulting services provide clients with overall project management tasks in the areas of comprehensive engineering design of electrical transmission and distribution, substation and transmission line projects nationwide. As a Lead EPC Substation Project Engineer, you can expect to: • Act as the project technical lead for high voltage substation designs focused on projects utilizing EPC or other progressive contract vehicles that collaborate with construction., • Lead and/or perform Substation Physical Electrical engineering design (including general arrangement, electrical plans and sections, grounding plan and details, raceway plan and details, shielding plan and details, lighting plan, and details, etc.) at HV and EHV voltage levels while adhering to prevailing standards, practices, procedures, and project/program requirements., • Lead and/or perform Protection and Control engineering design (including relaying one-lines, AC schematics, DC schematics, metering, SCADA systems, station communications, station automation, station security, etc.) at HV and EHV voltage levels while adhering to prevailing standards, practices, procedures, and project/program requirements., • Lead and/or conduct engineering studies and calculations (including bus spans, shielding, lighting, conduit fill, AC/DC loading and system design, etc.)., • Understand and apply industry standards, applicable state and federal safety codes, regulatory compliance requirements, and construction codes to projects., • Create equipment, material, construction, and testing and commissioning specifications., • Perform quality control (QC) reviews and lead QC review meetings on applicable engineering deliverables produced by junior staff, peers, and remote offices on small, medium, and large projects while adhering to the PDS quality management standard., • Provide technical oversight, direction, and support for project teams., • Assure proper documentation of project technical data., • Ensure and facilitate project team collaboration and communication across all disciplines and resolve design conflicts as needed., • Coordinate with project managers to successfully deliver projects to our clients., • Work directly with clients on project-related issues., • Direct and/or participate in client meetings and job-site visits to collect and deliver design and engineering information., • Identify and resolve project-related issues while proactively communicating and collaborating with the client., • Perform evaluations of existing facilities to propose upgrades and replacements and present findings and recommendations to our clients., • Apply value engineering principals for economized, constructible, and safe designs., • Complete conceptual design (one-line and general layout) to support project planning., • Provide professional mentorship while setting and maintaining a positive professional example for the team and junior staff What Sets You Apart (Background Qualifications): • Bachelor's degree in electrical engineering from an accredited university with eight (8) + years of prior relevant experience in utility substation design/engineering;, • Professional Engineer (PE) License Required, • Ability to Demonstrate advocacy of Quality Assurance and Control in the field of substation engineering., • Comprehensive understanding of the utility grid (power generation, transmission, and distribution) system and the theories and principles involved in substation engineering., • Comprehensive understanding of industry standards (including NEC, NESC, NEMA, IEEE/ANSI) and their application to projects., • Competence in researching engineering and design issues, evaluating alternatives, making sound recommendations, and preparing and presenting recommendations., • Ability to meet deadlines under high-pressure situations., • High level of computer competency/Proficiency with using MS Office applications., • Team player who can work effectively in a team environment with an ability to deal with and lead a variety of individuals from various socio-economic, cultural, and ethnic backgrounds., • Strong written and oral communication skills; Strong organizational skills., • Ability to travel locally/regionally up to 15% of the time You Might Also Have (Preferred Qualifications): • Experience with substation physical and protection and control design., • Experience with engineering programs and software (including SKM, ASPEN, ETAP, CDEGS, or vendor software)., • Experience with serving as firm-client liaison in a support and lead engineering role., • Prior experience as a substation lead engineer performing QC reviews and staff training/mentorship, • Experience leading renewable generation projects or interconnections, • Experience working on EPC projects or similar style of contracts, • Active membership in national engineering societies and work groups (IEEE, PES, etc.), • Construction support experience. At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. PDSPM PDSSUBSTATION If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. March 23, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $107,900.00 - $195,050.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

OBJECTIVE: The Manufacturing Engineer is a "hands on" role. This position serves as the key technical resource for the manufacturing operation, focusing on preventive maintenance, troubleshooting, and problem resolution for equipment issues. This position is also the Engineering representative in the NPI process. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Analyze, implement, and train layout of equipment, workflow, production methods, and workforce utilization and implement processes and procedures to maximize efficiency., • Work autonomously to re-design, repair, or replace in-process production program equipment, production control hardware, and tooling., • Develop and document Standard Operating Procedures (SOPs), Work Instructions, troubleshooting processes, tooling, and production controls for new programs and equipment. Train Manufacturing Engineers and Technicians in these areas., • Create and verify bills of materials (BOMs)., • Review/update drawings, grant approval to upload to document management system (ETQ)., • Competency with company drafting practices., • Collaborate with internal functional groups and customers to develop product documentation., • Perform or assist with troubleshooting on new and existing products., • Design of fixtures and ancillary items as required., • Development and implementation of experiments to assess components and finished goods., • Drawing creation and modification using Solidworks., • Develop and apply knowledge of specifications pertinent to materials, packaging components, and finished goods., • Acts as Engineering representative for all company new product introduction (NPI) activities. Ensures all necessary documentation is in place prior to phase gates., • Stay informed of new manufacturing technology and equipment; investigate their potential application. Recommend incorporation of new technology for company applications where feasible and practical., • Participate in the process to quote new products., • Prepare User Requirement Specifications/FS and source new equipment., • Perform validation document review for new equipment., • Plan and execute the preventive maintenance program., • Lead continuous improvement efforts using lean manufacturing principles., • Prepare and manage capital projects including identifying scope, cost, milestones, etc., • Schedule and manage third-party contractors, ensuring compliance with all company policies and procedures, and regulatory requirements., • Serve as a key resource for safety related issues with the goal of meeting/exceeding OSHA requirements for a safe workplace., • Interface with customers as required., • Travel between Silgan Unicep facilities as required., • Regular attendance., • Bachelors degree in Mechanical Engineering, or a related field, or an equivalent combination of education and experience., • 3-5 years manufacturing experience., • Demonstrated ability to lead people and get results through others., • Ability to operate and have knowledge in using SolidWorks software., • Must be able to define problems, collect data, establish facts, draw valid conclusions, and demonstrate the ability to determine critical parameters., • Demonstrated ability with technical writing. Ability to communicate effectively, both orally and in writing to management and technical staff audiences. Ability to stand in front of small to large technical audiences and provide training., • Applies theory backed by knowledge and experience to provide direction and base decisions., • Preventive maintenance experience., • Ability to work independently with minimal supervision., • Strong mechanical aptitude and working knowledge of electrical and mechanical systems., • Good troubleshooting and diagnostic skills., • Demonstrated organizational skills, with the ability to handle and prioritize multiple projects simultaneously in a timely manner in a fast-paced environment., • Prior experience in FDA manufacturing facility and GMP regulations preferred., • Frequently required to talk and hear., • Frequently required to sit., • Frequently required to stand and walk for long periods, as work requires., • Occasionally required to bend at waist and knees., • Regularly lift and/or move up to 25 pounds (12 kg)., • Occasionally required to lift up to 50 pounds (23 kg). LIMITATIONS AND DISCLAIMER The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. All job requirements are subject to possible modification to reasonably accommodate individuals with disabilities. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other employees. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with Federal and State Laws. Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. Continued employment remains on an "at-will" basis. Silgan is an Equal Opportunity Employer. We consider applicants for all positions without regard to race, color, religion, sex, national origin, age, marital status, or the presence of a disability, which would not prevent the performance of essential job duties with, or without reasonable accommodation of any other protective status. Silgan is a drug-free workplace.

Division: Seattle Main Project Location(s): Moses Lake, WA 98837 USA Minimum Years Experience: Travel Involved: Job Type: Regular Job Classification: Experienced Education: Job Family:Construction Compensation:Salaried Exempt Position Description: Perform daily project operations and engineering to coordinate project planning, engineering, VDC coordination, and generate basic financial reports. Provide onsite support for delivery coordination and material hand-offs in collaboration with project team, vendors, and Turner organization as required by project schedule. Project Location: Moses Lake Reports to: Project Engineer, Project Manager or Project Executive Essential Duties & Responsibilities: Lead responsibility for: • Collaborate with Turner management to identify and discuss project issues and develop resolution plans, and as appropriate, engage with project team, vendor, owner and construction team resources to resolve., • Maintain project documentation system to access and upload project-specific folders and maintain timely and comprehensive project documentation, including photography, meeting minutes, engineering documentation, shop drawings, and other project documentation., • Coordinate project delivery in accordance with project on-site delivery dates and sequence. Develop and maintain delivery schedule aligned project Contract Items List (CIL)., • Manage project submittals, transmittals, and Requests for Information (RFIs) for defined project deliverables, emergent work, drawings, product approvals and variances., • Review procurement and engineering packages to understand scope of work for each project vendor and integrator., • Record and manage Pending Change Order (PCO) reviews and provide onsite analysis (e.g., confirm lengths, quantities, material conformance) and report findings to Turner management., • Generate and deliver project reports to project team inclusive of schedule, material status, manufacturing status, engineering document status, minutes of meetings., • Facilitate site readiness coordination including detailed transportation schedule, materials delivery methods, onsite receiving requirements including alignment to project schedule, demands, and delay notification requirements., • Conduct inventory of Turner deliveries and obtain appropriate chain of custody signature from project team for items delivered to project site., • For equipment and deliveries, obtain proof of data to ensure storage area meets environmental requirements and completion of predecessor work prior to delivery., • Conduct material reinspection for periods of extended storage., • Develop and/or collect documentation in support of delay back charges and claims from site stakeholders., • Assist in collecting and uploading vendor and integrator close-out documentation per contract documents., • Participate in activities, duties, and responsibilities to ensure safe project deliveries., • Other activities, duties, and responsibilities as assigned The salary range for this position is estimated to be 90,000.00 - 120,000.00 USD annualized. Turner Construction provides flexible benefits, including medical, dental, and vision coverage, financial benefits such as a 401(k) plan, Health Savings Account, Flexible Spending Account, wellness benefits, a voluntary legal plan, identity theft, life insurance, and short-term and long-term disability coverage. In addition to our extensive benefits offerings, we provide paid vacation, wellness/sick time, holidays, paid parental leave, tuition reimbursement, employee referral bonuses, and end-of-year appreciation pay. Qualifications: • Bachelor's Degree from accredited degree program in Construction Management, Supply Chain, Engineering, Industrial Systems Engineering, or related field of study, with minimum of 3 years of experience in manufacturing or construction industry, or equivalent combination of education, training, and experience, • Field construction or engineering experience with knowledge of project scheduling, desired, • Able to understand and interpret contract documents, drawings, specifications, scopes of work and project schedule, • Good judgment to solve problems, escalate issues, and request prioritization of responsibilities, • Self-starter with project management fundamentals and able to quickly adapt while working in fast-paced environment, • Professional verbal and written communication skills with effective presentation delivery, • Demonstrate interpersonal skills and collaborative teamwork across organizational levels, management, and stakeholders, • Exceptional organizational skills with attention to detail, • Able to take direction, apply active listening skills, learn and process information quickly, ask clarifying questions, and follow tasks through to completion, • Proficient computer skills, Microsoft Office suite of applications and familiar with collaborative tools (e.g., PROCORE, ACC, SAP, Clearstory), • Knowledgeable of continuous improvement tools and methodologies The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; talk or hear and taste or smell. The employee is frequently required to stand and walk. The employee is occasionally required to climb or balance and stoop, kneel, or crouch. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is sometimes exposed to moving mechanical parts. The employee is occasionally exposed to airborne particles or caustic chemicals. The noise level in the work environment is usually moderate to very loud. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

Job Description While we're not hiring, we expect more opportunities to open soon. Apply now to have a conversation with a recruiter and stay in the loop. Who are we? The TSS Family of Companies is one of the largest independent laboratory and hospital service providers with locations across the United States. Our customers include leading life sciences and healthcare companies and renowned research institutions. We are a leading provider of environmental monitoring solutions and testing, calibration, and certification services for controlled environments, medical gas systems, and laboratory instrumentation. Our Family of Companies includes Technical Safety Services (TSS), Evergreen Medical Services (EMS), and Cornerstone Commissioning. We are rapidly growing and looking for additional passionate and talented employees to join our team and partner with our customers who are doing dramatic work focused on improving the human condition. How will you make an impact? The Validation Engineer is responsible for the development and execution of customer validation protocols and associated documentation. The Validation Engineer is also responsible for understanding the importance of their position and performance as it pertains to the overall reputation, achievement of goals, and overall stability of the company. If you enjoy working in an office for 8 hours a day, this role is not for you! If you enjoy working independently or part of a team in the field and being part of a dynamic, growing team, then come join us! What will you do? Technical Responsibilities • Develop documentation for CQV activities, • Write and execute validation protocols, • Develop validation plans, protocols, and summary reportsAreas of Focus (one or more), • Facilities, • Utilities, • Equipment, • Analytical instruments, • Manufacturing Execution Systems (DCS), • Building Management Systems (BMS), • IT-based or Computer Systems (CSV)Project & Team Management, • Understands and anticipates customer needs, • Delivers high-quality solutions and service, • Proactively maintains satisfaction and loyalty, • Plan for Success, • Aligns business strategies with actionable plans, • Anticipates risks and builds contingency plans, • Prioritizes time and resources effectively, • Holds self and others accountable, • Acts to overcome obstacles and improve quality Education and Experience • Bachelor’s degree in a science or engineering field (or equivalent experience), • 2+ years’ experience in validation in Pharmaceutical, Biotech, and/or Medical Device industry, • Excellent customer service and relationship building skills., • Strong troubleshooting and problem-solving skills with the ability to continually learn new services., • Ability to work effectively with minimal supervision with effective time management and prioritization skills., • Highly effective verbal and written communication skills., • Ability to multi-task to achieve high completion rate of assigned duties. TSS is a passionate equal opportunity employer and celebrates diversity. Interested in a role but not sure it’s the right fit for you? Call us and let’s talk. Powered by JazzHR s7DzHMnBSu

Waterworks Road - Responsibilities: Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems; Troubleshoots electrical issues; Responds to daily maintenance requests in a timely fashion to minimize equipme

Sligan Dispensing - - Responsibilities: Lead maintenance troubleshooting and repair across electrical, pneumatic, and mechanical systems; Develop and implement preventive maintenance schedules and protocols; Lead the continuous improvement process to reduce downtime; Oversee data analysis efforts t

Responsibilities: Operates seated forklift to load pallets from floor to trailer; Prepares slip sheets and shrink-wraps unstable loads; Picks up large debris and sweeps area; Maintains clean work area; Complies with safety policies.

Shari's Cafe and Pies - 12502 N Division St [Dishwasher / Busser / Porter / Cleaning] As a Dish Machine Operator at Shari's, you will: Load, run and unload dish machine; Keep the dish machine clean and report any functional or mechanical problems; Wash and store all tableware and kitchenware; Keep d

Aerotek - - Responsibilities: Pull orders and stock bins as a material handler.Sort orders, stage them for trucks, and load the trucks.Organize paperwork related to loading and shipping.Operate a 5,000lb gas-powered sit-down forklift and combilifts.

Avenue5 Residential - - Responsibilities: Perform various maintenance functions including repairs to electrical, plumbing, appliances, flooring, carpentry, HVAC, grounds maintenance as dictated by state guidelines; Perform general carpentry duties such as wallboard repair, countertop/cabinet replac

Hourly Operates equipment and performs general labor on the airfield and buildings in support of the maintenance function.

Aerotek - JobID: JP-005854937 [Production Operator / Assembly Line Worker] As a Mechanical Assembly Worker at Aerotek, you'll: Perform mechanical assembly on different electronic products; Read and interpret blueprints, and quality-check the final products; Perform other duties as assigned.

Keurig Dr Pepper - - Responsibilities: Accurately pick products by matching numbers and products using voice audio headset; Hand stack cases of product weighing up to 50 pounds repetitively from floor to over-head; Place the beverage products in a defined stacking pattern onto the pallet; Hand shri

Aerotek - - Responsibilities: Assemble corrugated box machines according to blueprints.Utilize standard hand tools for assembly, such as screwdrivers, sockets, wrenches, and power screwdrivers.Perform basic mechanical assembly of machines in various sizes and shapes.Engage in tasks requiring heavy

Weyerhaeuser - - Responsibilities: Safely operate and maintain propane or gas forklift to move products from stock lines to staging and/or cut stations; Safely load and unload products from various trailers and rail cars; Accurately perform basic math skills such as adding, subtracting, and multipl

Aerotek - - Responsibilities: Assemble spa and hot tub accessories such as risers and covers; Add insulation and trim to products; Perform drilling, riveting, and screwing tasks; Use hand and power tools proficiently; Follow templates and take precise measurements with tape measures.

Completed post-secondary education in Wood Processing, Construction, Engineering, or related discipline. Coordinate and collaborate with architects, engineers, contractors, and subcontractors to ensure project goals are met.

Aerotek - - Responsibilities: Load and unload approximately 70-80 trucks daily; Operate sit-down forklifts with enclosed cabs capable of lifting up to 12,000 lbs, handling two pallets at a time; Perform manual labor tasks outside of operating the forklift; Assist with plant operations during less b

We are a comprehensive design company providing architecture, interior design, MEP engineering, and consulting on medical equipment planning and technology. Engage with clients to ascertain functional and specific requirements, and compile design information including specifications, materials, colo

Work directly with Engineering and the customer during the discovery and development phases of the project. Bachelor's degree in business, design engineering or equivalent education and experience. Manufacturing Engineering experience a plus.

Company equipment and tools management. Completion of a four (4) year bachelor’s degree in Construction Management, Construction Science and/or Civil Engineering, from an accredited post-secondary institution.

Job Description/Skills: This position requires the candidate to work onsite 50% of the time in the Bothell, WA office.Key Responsibilities Requirements: At least 8 years of hands-on enterprise level project management experience on a variety of technology projects (software development, system integ

In addition, this position requires frequent, detailed communications via verbal, written and electronic means to owners, engineers, manufacturers, contractors, government agencies and fellow CSCO employees.

Raytheon - 11135 West Westbow Lane - Responsibilities: Set up CNC machines and run parts; Follow a weekly Preventative Maintenance process; Use precision gauging tools (including CMM), verifying gauge calibration; Identify and document out-of-spec conditions; Maintain a clean and organized work area

Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design. Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing

Raytheon - 11135 West Westbow Lane - Responsibilities: Operate large-scale CNC textile loom equipment used for product processing; Perform Equipment Preventative Maintenance; Assist with data entry requirements and process documentation; Adhere to engineering instructions, SOPs, and departmental pro

ABF Freight - - Responsibilities: Load and unload cargo; Operate a forklift as needed; Pickup and deliver cargo; Perform tractor/trailer inspection and setup; Log loading sheets accurately.