Trabajos equipment engineer en New Rochelle, New YorkCrear alertas

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand Team Member of the Month, Quarter, and Year recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. The Senior Controls / Automation Engineer role requires an individual have a diverse engineering skill set with the ability to work independently to perform all aspects of process automation engineering and system integration, including initial concepts, specifications, design engineering, documentation, project implementation, testing, startup, and training of operating and maintenance personnel. You will be a key member of a diverse team of professionals developing solutions for our client's most complex automation challenges. Location: Regional Southern CT / Tarrytown area travel to sites You will: • Lead or work on a project team responsible for the design, configuration, and testing of continuous and batch control applications., • Understand the project scope and financials and exercise good time management skills to plan & coordinate the work as part of a project team by developing project schedules and budgets in collaboration with project leadership and identify change orders and justify changes to Project Management ensuring completion of all project deliverables to the satisfaction of the client., • Anticipate and provide solutions to project leadership and/or customer giving high priority to customer satisfaction offering strong technical expertise and advisement as part of the project team., • Adapt to a flexible work schedule & travel, if necessary, to participate in the design, development, and start-up of control systems at the client's facility., • Act as an automation Subject Matter Expert, • Hands on experience executing automation projects for process plants, minimum of 3-5 years in industry, preferably in Life Sciences domain., • BS Engineering degree or equivalent educational background, • Detail oriented with strong technical aptitude and desire for learning new technologies, • Knowledge of industry and regulatory standards, design criteria and codes relevant to Instrumentation and Controls, • ISA S88 Batch standard, • ISA S95 Controls System Architecture standard, • GAMP 5 & cGMP, • 21 CFR Part 11, • Demonstrated ability to develop process control system applications, utilizing Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems, configuration of thin client server applications, design, developing & maintaining databases for data collection, configuring process historians and using reporting tools to present process data to operations & management, tuning control loops, providing control system startup services, troubleshooting existing control systems and providing control system qualifications., • Solid understanding of object-oriented software development & delivery methodologies, • Expertise with the design, implementation, maintenance and troubleshooting of virtual server-based control system architectures, and understanding of control system network topology, i.e. Ethernet, Ethernet/IP, ControlNet, DeviceNet, etc., • Knowledge of process instrumentation specification, installation & troubleshooting, and control panel design, check-out, commissioning & troubleshooting, • Hands-on experience rapidly troubleshooting and solving equipment & instrument-related issues during start-up and commissioning and perform complex system testing, • Experience working at customer sites supporting the installation & commissioning of equipment and systems., • PLC Programming with Rockwell Studio5000, RSLogix5000, • Ability to program in RLL, SFC and ST, • Plant Pax module definition is required, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off. #LI-BB1

Job Description Job Description Job Title: HVAC Design Engineer Location: Mount Vernon, New York Company: ICE AIR, LLC and Affiliates (“Ice Air”, the “Company”, “We”) About Us: ICE AIR is a manufacturer of innovative HVAC solutions serving the North America market. We are dedicated to providing reliable, quality, energy-efficient equipment for all new construction, replacement and retrofit projects. Position Overview: We are seeking a Design Engineer with a strong mechanical engineering background to join our product development team. This role focuses on the design, modeling, and development of HVAC systems and components. The ideal candidate is creative, detail-oriented, and enjoys working through the entire design cycle—from concept development and CAD modeling through prototyping, testing, and final production release. You will collaborate closely with cross-functional teams including manufacturing, supply chain, and sales to deliver high-performance HVAC solutions that meet customer and regulatory requirements. Key Responsibilities: • Design and develop new HVAC products and components, with emphasis on innovation, energy efficiency, and manufacturability., • Create detailed 3D CAD models and engineering drawings (SolidWorks or similar) for new designs and product improvements., • Support prototype development, assembly, and validation testing., • Work with various regulatory and industry organizations for testing and certifications, • Work with offshore and internal engineering teams to coordinate design and development efforts., • Work with sales, marketing, manufacturing, finance, supply-chain and other departments Required Skills • Strong CAD design skills utilizing SolidWorks or similar CAD experience, • Bachelor's degree in mechanical engineering or similar field, • 2 to 5 years of working in the HVAC industry, manufacturing, electronics, or similar industries, • Team player, • Structured and organized mindset, • Excellent professional communication skills, • Understanding of thermodynamics, heat transfer, and fluid mechanics as applied to HVAC systems., • Strong analytical and problem-solving skills with the ability to balance theoretical and practical considerations., • Ability to work with minimal supervision, • Familiarity with electronic controls or system integration., • Competitive salary, bonus, and benefits package., • Significant long-term growth opportunity., • Collaborative and supportive work environment.

Job DescriptionSalary: 80K+ Title: Project Engineer Job Summary Infinity Contracting Services Corp is actively seeking a highly motivated Project Engineer with prior construction experience to join our team to a project located in the five boroughs of New York City. We recognize our employees are the companys most valuable asset. Inspiration, diligence, and encouragement towards each other coupled with purposeful work lead to a rewarding career, and we are proud to provide a platform with which our employees can attain their goals. The Project Engineer position will assist and support project manager, superintendent, and/or foreman on assigned project(s). The position will work under direct supervision, perform routine daily activities and gather, distribute information and deliverables, and manage project management software. Responsibilities and Duties Setup, manage and maintain project management software for each job Organize, maintain and process contract documents and shop drawing in order to meet project budget, schedule, and requirements Identify, issue and manage RFIs Formulate start-up, testing and commissioning procedures Serve as a point of contract regarding technical information associated with the project Verify existing field conditions and report changes to affected parties Lead internal MEP coordination process Facilitate required inspections, testing, and commissioning Review contract documents for completeness and consistency Identify project scope deviations from contract documents and field observations Monitor construction progress for quality compliance Resolve and manage client issued non-compliance reports Assist the project manager with buy-outs Release equipment and materials per approved submittals Manage and coordinate lead times and delivery dates for equipment and material Generate submittal, RFI, equipment, etc. logs for project stakeholders Qualifications and Skills • Bachelors Degree in Engineering: Mechanical, Civil, Environmental, or related engineering disciplines (or equivalent experience)- NOT REQUIRED, • 3+ years of experience on projects, • Ability to work in a multi-task environment, • Strong oral and written communication, • Excellent time management skills, • Working knowledge of Microsoft Office Suite Benefits: • 401 (k) *401 (k) matching *Dental Insurance *Health Insurance *Vision Insurance *Life Insurance *Opportunities for advancement

Job Description Job Title: MES Engineer Job Summary: Full-time position as a Manufacturing Systems (MES) engineer. Under the general supervision of the IT Director/Manager, provides technical assistance in the use of administrative computing systems including MS/Oracle SQL, Windows Server Systems, IT infrastructures, as well as various reports to multi-cultural groups in multi-language (Korean). The specialist will learn knowledge of manufacturing systems while also providing technical assistance as described. Characteristic Duties and Responsibilities: • Assist in writing reports to various groups in multi-language (English/Korean), writing supporting documentation through SQL queries/ system provided reports., • Assist project teams in providing systems analysis and coordination in support of major system implementation., • Provide clear and professional verbal, written, and electronic communications amongst IT members, IT systems vendors, multi-cultural groups, and the end-user community. This includes preparing routine status reports, procedural guides, technical advice, and recommendations., • Meet and exceed end-user service requirements for maximum performance, stability, and reliability by daily monitoring and tuning existing Enterprise systems., • Provide recommendations for hardware (IT/Manufacturing) and software as requested. This will be achieved by gathering end-user requirements, analyzing existing systems, researching vendor specifications, and then reporting and presenting to IT team members as appropriate for further review., • Provide training & technical supports to end users on use of new/existing global systems., • Work collaboratively with Automation (PLC Control Engineers) for troubleshooting/improvements between manufacturing related systems and related equipment., • Identify and troubleshoot in a timely manner when system issues occur through DB access/In-house Interface programs related/connected with manufacturing equipment, • Perform other related duties as required. Minimum Qualifications: • Related Bachelor's Degree; or 3 years related experience and / or training; or equivalent combination of education and experience, • Strong troubleshooting methodology is required, • Possess a broad knowledge of servers along with operating systems, • Good customer service skills, communication, work independently and have interpersonal skills. Preferred Qualifications: • Possess a broad knowledge of MES. - Microsoft Certification, • Understanding of MS Office and other standard software, • Understanding of Active Directory and Windows System Infrastructures, • Bilingual as English and Korean fluency a plus Travel Required < 10%

Job Description HVAC Controls Engineer - White Plains, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have previous experience with the design, construction, integration, and commissioning of Controls and Building Automation Systems (BAS systems) as it pertains to Mechanical / HVAC equipment design in a data center environment. The candidate shall have the expertise to lead the design of new systems and make upgrades to existing automation systems for HVAC and critical cooling systems in the mission-critical environment. The candidate may need to assist in complete startup, commissioning, and validation procedures of these systems. The candidate will need to collaborate with the Electrical and Mechanical Engineering teams, for design sequences, powering of equipment, etc. Responsibilities: • Execute and lead automation design teams of complex scope, and coordinate activities with other disciplines as needed, • Mentor mechanical engineers and assist with training on controls design and development., • Design and implement front end platforms for HVAC controls., • Develop and improve configuration, programming, networking, and diagnostic standards, • Engineer and Implement programming, • Lead creation of modification of programming logic to meet sequence of operations / SOO / Methods of Procedures / MOPs, • Design control, monitoring and systems integration of HVAC / mechanical equipment / systems, • Maintain and deploy updated versions of applications for existing control systems with minimal supervision, autonomous in day-to-day work with being given high level instruction on projects or assignments, • Work with leading edge automation systems from large scale controls vendors;, • Lead development design and continuous improvement of configuration, programming, networking, and diagnostic standards;, • Lead design of controls for centralized chilled water plans condenser water plants, etc., • Review engineered shop drawings and submittals - sequence of operations, installation drawings and point lists, • Participate in building automation focused design reviews, • Assist in the design, configuration, programming, and diagnostics / troubleshooting of BAS networks, • Understand IT / OT interface requirements including routers, switches and network addressing, • Assess, recommend, and implement industry best practices into new and existing Critical Environment Programs, • Develop process documentation and training materials, • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs, Controls vendors, GC's and commissioning agents on project progress, • BA / BS in Engineering or relevant degree a Huge Plus, • Licensed PE / EIT / Certifications a Plus, • Data Center Engineering experience with Automation and Controls Experience, • Experience integrating PLC / ALC with complex data center / mission critical facilities, • 5-10 + years with BMS / BCM / BAS Systems (Building monitoring systems / building control systems / Building Automation Systems, • Previous experience working on Controls Products from companies such as: Johnson Controls / JCI; Siemens; Automated Logic; Honeywell; GE Control Systems; Schneider Electric, • Ability to read and audit one-lines / blueprints / CAD drawings and controls diagrams, • PLC / ALC Programming Experience, • Experience with Controls systems design as it relates to: Critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Experience working with common BAS protocols BACnet IP, BACnet MSTP, Modbus RTU, Modbus TCP, etc., • Skilled at reviewing design drawings and equipment submittals, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, delegator and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Superior analytical, planning and problem resolution skills, • Must be able to provide necessary pro-active recommendations to clients, • Knowledge of general computer hardware & software applications After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Fire Protection and Plumbing Engineer - White Plains, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP Critical Facilities Design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Candidate will work with customers to gather design requirements for plumbing and fire protection design projects supporting various mission critical / data center centric projects. Will translate requirements to internal design team, while providing updates to customer. Responsibilities: • Design Plumbing and Fire protection systems in mission critical facilities - trade floors, labs, control rooms, data centers, etc., • Fire and plumbing engineering and design of systems cold and hot water systems, non-potable water systems, water treatment, sanitary drainage and vent systems, storm drainage systems, all types of pumping systems, natural gas distribution systems, special plumbing systems; fire suppression systems; sprinkler piping design, including hydraulic calculations; Incipient fire detection systems, • Work on multiple projects simultaneously, • Coordinate with other internal engineering disciplines to achieve successful, functional and innovative designs for our clients, • Interact with other building disciplines (architectural, structural, electrical, mechanical, civil, controls, etc.) to ensure compatibility with the design intent, • Select equipment for use in building systems and write reports, • Provide specifications for all fire protection and plumbing materials and equipment, • Go to client site as needed for project meetings/site observations, • Perform field surveys at customer sites to document existing conditions and/or observation of construction activities, • Participate in client project requirement meetings and value analysis and basic cost estimating, • Conduct QA /QC / quality assurance and quality control on project, • Perform and oversee the performance of load calculations and system design using company standard software, and proprietary manufacturer software, • Develop Plumbing and Fire Protection Drawings, • Design and document Plumbing and Fire Protection systems, • Assist in the continued development and updating of standards and specifications for the plumbing and fire protection, • Familiarity with renovation and new work projects; appropriate codes, standards and industry best practices, • Prepare Contract Documents using Revit and AutoCAD, • Bachelor's degree in Mechanical / Fire Protection / Plumbing engineering degree required, • Previous experience at an engineering consulting MEP firm a big plus, • PE; Professional Engineer a big plus, • Mission Critical Facilities Experience a huge plus!, • 5+ years' experience or more of plumbing design and fire protection systems, • Strong technical knowledge in fire protection and plumbing, • Excellent organization and planning skills, • A sound knowledge of engineering fundamentals, • Highly motivated, proactive and willing to take on new challenges, • Strong computer skills and skilled in software typically used in plumbing / fire protection design (i.e. hydraulic calculations, etc.), • Strong working knowledge of building, plumbing and fire codes, • Strong communication skills! Excellent written and verbal!, • Revit Experience is a must, • Ability to interface with clients After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Senior Electrical Design Engineer About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world’s aircraft, Safe Flight counts among its customers the majority of the world’s aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight’s benefits: include employer-funded health care, on-site lunch program, 401K contribution, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Job Details: Onsite Monday - Friday 8:00 a.m. to 4:45 p.m. Salary Range: $115-$140k, commensurate with experience. Responsibilities: • Architect and design electronic circuits for aviation computers, test equipment, and harnesses., • Evaluate design choices to ensure compliance with product functional requirements, environmental compatibility, and manufacturing lifecycle. Generate comprehensive reports and documentation supporting design decisions., • Develop statements of work for contracted services, such as board layout, and effectively manage contractors throughout project execution., • Create detailed test procedures and reports for electronic hardware, ensuring product reliability and performance., • Offer engineering insight to Program Management and Sales and Marketing teams for new business proposals and customer support activities., • Provide support to manufacturing and repair departments, particularly for legacy products., • Expertise in digital design operating in the hundreds of MHz range, utilizing ARM Cortex or similar-scale microcontrollers., • Proficiency in analog computer design and circuit analysis., • Experience designing for electromagnetic compatibility (EMC) and environmental qualification standards such as RTCA DO-160G, MIL-STD-810H, MIL-STD-704F, and MIL-STD-461G., • Experience designing for safety-critical electrical systems., • Excellent verbal and written communication skills., • Schematic Capture and PCB layout with Altium Designer., • Familiarity with bare-metal embedded C to support software engineers in driver development., • Proficiency in Excel, Python, or similar data analysis tools., • Bachelor’s degree in electrical engineering from an accredited school., • 7+ years of experience with responsibilities comparable to those required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Equal Opportunities Employer Safe Flight provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #hc186285

Job DescriptionSystems Integration Engineer Direct Hire Opportunity We are recruiting on behalf of our client, a leading manufacturing company, for a Systems Integration Engineer to join their Engineering team. This is a direct hire, full-time position offering excellent growth opportunities. Position OverviewThis engineering position offers an excellent entry point or advancement opportunity. The role involves exposure to various engineering tasks across all project phases, including field work. The successful candidate will work as part of the Test Equipment group and participate in diverse engineering projects while learning products, design concepts, company operations, and industry practices. This is a heavy field work role requiring travel and variable hours according to business needs - it is not a desk job and it is not 9am-5pm. Key Responsibilities • Resolve engineering issues in system integration and manufacturing aligned to project schedules, • Work with System Functions, Functional Interfaces, Electrical/Mechanical Interfaces, Asset Management, and Test Equipment, • Analyze and evaluate electrical schematics, mechanical drawings, pneumatic diagrams, test procedures, and technical documentation, • Plan solution paths and coordinate tasks with multidisciplinary engineering teams, • Generate and maintain asset management documents and official correspondence, • Track project progress and coordinate actions with suppliers and customers, • Participate in technical meetings, witness tests, and document meeting minutes with action items, • Support on-site testing activities, troubleshooting, and field modifications, • Provide engineering support to other departments across all project phases and manufacturing, • Coordinate technical activities with project management groups, • Lead technical discussions in design review meetings, • Provide elevated support for engineering headquarters by offering technical interpretations and faster response solutionsQualificationsEducation:, • Bachelor's degree in Electrical Engineering, Mechanical Engineering, or related engineering/science field, • Master's degree preferredExperience:, • Entry level (1-3 years) to mid-level (5-10 years) engineering experience, • Transportation industry or closely related field experience required, • Experience in system design, systems integration, or project engineering a plus, • Professional Engineer (PE) certification a plusRequired Skills & Competencies, • Practical knowledge in both electrical and mechanical engineering, • Strong problem-solving abilities for both technical and non-technical issues, • Excellent written and verbal communication skills, • Strong schedule management and task management capabilities, • Team player with collaborative mindset, • Commitment to multi-year projects, • Willingness to travel domestically and internationally for business, • Availability outside normal business hours when required, • Experience with federal regulations and official standards (AAR, APTA, IEEE, ASME, EN, MIL, etc.) Employment Details, • Position Type: Direct Hire, Full-time, • Salary: $85,000-95,000 (DOE), • Classification: Exempt, • Department: Engineering, • Reports To: Engineering Manager, • Travel: Required for domestic and international business travel

Job DescriptionSenior Electrical Engineer - White Plains, NY Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will involve acting as a senior electrical engineer, designing critical power systems for new data centers and expansions to existing data centers. The ideal candidate will have past experience designing electrical systems specifically for large data centers. They will have experience and in-depth knowledge of Electrical Power Systems / Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems, PDUs and electrical switchgear is a must. They will be proficient using AutoCAD MEP and Revit MEP to develop electrical construction models and documents. You will help lead the design and effectively work with / communicate with all the trades and stakeholders involved in the project. Responsibilities: • Manage projects, create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical engineering design role for all sizes of data center facility design projects- enterprise data centers, Colocation Providers and for Hyperscale Companies., • Create Conceptual Designs gathered from meetings with the client for Field Engineer focus, • Work with Management to respond to RFPs; Review shop drawings and submittals; Review and respond to RFIs, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies Put these in clear concise work statement for the field, • Represent the company in project meetings as needed, • Collaborate with all design staff and oversee full cycle electrical design activities, • Interact closely with the Project Management Team to produce construction documents, develop and edit project specifications and lead the construction administration process, • Execute and lead design teams and design projects of complex scope, • Perform intermediate to advanced electrical design tasks including development of electrical distribution systems and topologies, infrastructure and equipment layouts and selection / sizing of equipment, • Utilize AutoCAD and Revit software to prepare drawings, • Review and / or prepare book or sheet specifications for electrical systems, • Develop and / or review sequences of operations, • Assist in proposal development including project scope, schedule and budget, • Effective management of project design team including resource forecasting and coordination, • Identify potential project scope changes and aid in development of strategies to minimize impact and control deviations from estimated costs and project deadlines, • Support contact for design clients and builds effective, long-term client relationships, • May direct / coordinate interns / other engineering and technical staff, • Survey existing building conditions / Conduct Field Observations and prepares technical reports of findings and commissioning support, • Collect data and other information for construction documents, • Prepare project design and construction documents, • Review and complete punch lists and project closeout documents, • Prepare project progress reports for internal and external stakeholders, • 8-15 years experience, • Experience working for MEP firms, an A/E firm, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Experience with the design process of building systems for data center and mission critical projects, • Knowledge of electrical systems found in buildings including single/three phase power distribution, lighting and lighting controls, grounding and life safety systems, • Knowledge of codes and specifications for the design of electrical systems including National Electric Code, Life Safety and Energy Conservation Codes, • Technical / design software including short circuit coordination and arc flash studies, equipment sizing, underground feeder calculations and lighting calculations, • Previous experience using: Revit MEP projects, AutoCAD MEP, BIM a plus, • Experience working on data center /data center / mission critical projects, • Extensive Experience with Electrical Power Systems and Equipment - UPS / Uninterruptible Power Supply, Generators, Batteries, switchgear , Power Distribution Units, Backup Power , Electrical Power, Power Systems , Medium Voltage , High Voltage , etc., • Experience working on complex data center/mission critical facilities design projects a must, • Exceptional organizational skills for file management, • Skilled with various electrical topologies and distribution systems, • Skilled in performing code analysis including selection of equipment, wiring, etc. to meet code requirements, • Ability to successfully work independently, • Self Starter, self motivated, and should prioritize well, • Effective Communicator – emails, phone and face to face, • Complete assignments accurately and with attention to detail, • Analyze and prepare documents, reports and correspondence, • Communicate effectively directly with clients and at times serve as primary point of client contact, • Ability to work under pressure and meet close deadlines, • Ability to effectively plan and delegate the work of others, • Organizational skills, with the ability to manage multiple tasks simultaneously After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Watch Engineer Come join us at St. Cabrini Nursing Home! We are a 304-bed, Faith-Based, Nonprofit, Short-Term Rehabilitation and Skilled Geriatric Care facility founded in 1974 in continuation of St. Frances Xavier Cabrini’s legacy of serving those in need through works of healing, teaching, caring and giving. We are looking to fill the position of Watch Engineer. • $40 per hour. Operate and maintain stationary engines, boilers, generator, and mechanical equipment to provide utilities in the building. Possess knowledge of the integral workings of the facility. Perform general building maintenance as directed. Work on a rotating watch schedule. Watch Engineer Qualifications: • High School diploma or equivalent., • Minimum of 5 years experience as a fireman, water tender or stationary engineer., • Alternate experience as a Maintenance Mechanic at the Home with 3 years of experience and a demonstrated interest in power plant mechanics will be given consideration., • Blueprint reading ability required., • Required to interpret chemical treatment reports and adjust treatment to the refrigeration and boiler equipment., • Monitor and inspect equipment such as switches, valves, gauges, alarms, and safety devices., • Observe and interpret readings on gauges, meters and charts- registering various aspects of boiler operation to ensure boilers are operating properly., • Maintain daily logs of operation, maintenance and safety activities, test results, instrument readings, equipment malfunctions and maintenance work., • Operate stationary engines, boilers, pumps, compressors, and HVAC equipment., • Perform preventive maintenance on motors, valves, gaskets, and bearings by lubrication., • Check air quality of ventilation systems and make adjustments., • Supervise the work of outside contractors while working on equipment., • Assist Director in conducting fire drills, fire alarm tests and sprinkler blow down., • Perform monthly inspection and updates of all fire extinguishers. We aim to create a supportive workplace where you are valued, compensated fairly and provided the tools to thrive! Cabrini of Westchester can offer you: • Competitive Compensation, • Health, Dental, and Vision insurances, • Flexible Spending Account, • Benefits available 1st of the mo. following 30 days, • Life and supplemental insurances, • Employee Assistance Program with Discount marketplace, • Retirement Plan Cabrini of Westchester is an Equal Opportunity Employer and adheres to a policy that prohibits discrimination on the basis of race, color, sex, sexual orientation, gender identity, religion, creed, national or ethnic origin, citizenship status, age, disability, veteran status, or any other legally protected class. #CAB2025

Job Description BASIC FUNCTIONS Quality Engineer will provide support to the Sr. Director of Quality Compliance in maintaining a strong overall Quality Compliance Program including the Quality Management System. The core focus shall be technical reviews implemented and established for each Department. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Ensures customers’ technical requirements are met by reviewing process procedures, test procedures, and supplier / Internal quality manuals to understand the scope and testing requirements, • Ensures products meet the organizations and customers quality and product integrity requirements., • Supports process development or operations team by providing analysis and expertise throughout the inspection & testing process., • Counsel and advise Sales personnel on technical developments or nonconformances (drawings, capabilities, etc.), • Advise Sales and Operations leadership on capability/capacity for certain types of orders, products, etc., • Enforce CTG Quality Planning including product sampling., • Support RFP/RFQ/Contract reviews – quality and technical review, • Conduct routine Material Review Board & Counterfeit Review Board actions and provide resolution/disposition, • Responsible for reviewing and submitting CTG requests for designated Airworthiness Rep 8130’s, • Maintain and retain a working list of qualified ASA-100/FAA AC 00-56 trained Inspectors/Technicians., • Oversight of the DQR (Designated Quality Representative) program for Sikorski, Lockheed, GDLS, and UTC. Utilizing First Article / First Piece development per AS9102, • Conduct sampling reviews of contract to shipped product(s), such audits shall be documented, • Ensuring equipment Preventative Maintenance and Calibration requirements are established and followed., • Develop and implement HAZMAT protocols including handling and disposition, • Identifies root causes of problems in the inspection process; recommends and/or implements corrective measures., • Champions Lean-Six Sigma methodologies within the organization; responsible for organizations’ 5S program and identifies and leads projects focused on reducing waste and increasing quality, • Ensure Return Material Authorization process is reviewed and documented, authorize approval as required per process., • Identify requirements for product(s) reviewed at CTG for potential Reach/RoHS specifics, • Manage and Enforce ESD S20.20 requirements within critical zones., • Review all Return to Vendor items for adequacy prior to material leaving facility, process all requirements within EPDS., • Disposition all discrepant material, determine (based on RMA/RTV) scrap rates, rework rates and return to stock., • Serve as backup to Senior Director of Quality Compliance for conditional quality plan approvals and conditional supply-chain activation approvals., • Collect and Analyze quality information for the development of quality strategies and continuous improvement plans, • Performs other duties as assigned. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Audit Findings (Reference QMR outputs), • FAI completion rates (M/Y, Quantity and per customer) Avg. process time/capacity, • Conditional Quality plannings (M/Y – Type, product specific, processing time), • RMA & RTV Data, Including DM Rates (Scrap, Rework, etc.) EDUCATION / EXPERIENCE / COMPENTENCY Bachelor’s degree in industrial engineering or related discipline required. • Certified Quality Engineer or equivalent, • ESD Program Manager preferred, • Approximately 0-4 years of experience, • Excellent interpersonal skills with ability to serve as a liaison with developers, project managers, and customer support., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software, • Excellent organizational skills and attention to detail Preferred • Lean Six-Sigma Training/Certification, • Operational experience within QMS in Aerospace, Medical or other highly regulated industry

Job DescriptionSalary: $100- $130K Title: Construction Superintendent Job Summary Infinity Contracting Services Corp is actively seeking a highly motivated Superintendent for a construction project(s) located in the five boroughs of New York City. We recognize our employees are the companys most asset. Inspiration, diligence, and encouragement towards each other coupled with purposeful work lead to a rewarding career and we are proud to provide a platform with which our employees can attain their goals. The Superintendents position will be responsible to run the day-to-day operations and control short-term schedules. Coordinate and supervise all field staff, subcontractors, materials, and activities necessary to successfully complete a project of varying complexity. You will work with the Project Manager, Assistant Project Manager, and Project Engineer as a team to produce a quality product on time, within budget, complying with safety standards, and exceeding customer expectations. Responsibilities and Duties * Adhere and support the organizations safety, observing OSHA and all state-level agency regulations (MTA, SCA, etc.) * Enforce orientation of job-specific training (scaffolding, aerial lift training, etc.) on-site * Create and manage safety-related documents * Facilitate external/internal inspections * Host Toolbox talks and train new employees on safety standards * Identify potential safety risks and protect workers against possible hazards * Verify existing field conditions and report changes to affected parties * Establish and enforce acceptable levels of workmanship and good practices * Inspect materials for conformance against approved documents and specifications * Identify subcontractors NCRs, communicate across project stakeholders and ensure compliance * Identify and address punch-list items * Plan and direct construction activities of the subcontractors, laborers, and other staff as assigned * Monitor work progress to ensure adherence to construction schedule and budget * Identify, order and manage resources required to finish company self-performed activities * Assign daily tasks to field laborers * Maintain relationships with customers, architects, union representatives, subcontractors, superiors, and project team * Hire and layoff field labor * Identify conflicts in construction progress and communicate them to the project team for resolution * Initiate and communicate with project team RFIs, Submittals, and potential COs * Arrange on-site rigging, equipment, and material deliveries * Schedule subcontractors, consultants, and vendors in a critical path to ensure timely completion * Attend meetings with Construction Manager/client * Prepare daily reports * Collect and submit payroll documentation Qualifications and Skills • 2+ year(s) superintendent and/or foreman experience 5 years of construction-related experience. * Possession of SST62 * Strong oral and written communication. * Excellent time management skills.

Job Description As Maintenance Engineer, you’ll be responsible for performing general maintenance work to ensure hotel maintenance quality and safety standards are achieved and maintained. • The Maintenance Engineer responds to and handle guest and department radio requests in a courteous, efficient, safe manner and follow-up to ensure 100% satisfaction, • Complete maintenance request work orders from all departments in a timely basis, • Perform preventative maintenance assignments on a scheduled basis, • The Maintenance Engineer ensures that equipment is working properly, • 1-3 years of previous hotel experience preferred, • The Maintenance Engineer must be willing and have the ability to work a varied schedule that may include evenings, nights, holidays, and weekends, • Basic knowledge of painting, drywall, HVAC, electrical and plumbing is preferred, • General knowledge of machines and basic hand and power tools, • Ability to work in a fast-paced environment, • Ability to perform job functions with attention to detail, speed, and accuracy, • Ability to stand, walk and move around during entire shift, • The Maintenance Engineer must be able to lift, push, and pull items that weigh up to 50 pounds Salary: $21.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off

The Plant Utilities Engineer 1 reports to a higher level Plant Utilities Engineer or other trades supervisor, and is responsible for the operation, repair, and maintenance of a variety of heating, ventilation, air conditioning, and mechanical equipment inside and outside of a physical plant; may sup

Job Description Build Your Future with Us: Join Our Dynamic Team and Make an Impact! Maximum Security Products Corp. (MSP) is a Waterford, NY-based Detention Equipment and Miscellaneous Steel contractor and manufacturer. MSP is seeking an experienced Project Manager to join their team onsite in New York City, NY. The PM will be responsible for either one or multiple projects and manage all interactions with internal and external stakeholders including the client. The PM will also manage day to day execution of the project through all phases from initial startup, design and engineering, construction management, change management, closeout, commissioning, and warranty work. The PM will be responsible to a Project Executive for the profit and loss of each individual project and/or portfolio of multiple projects. Onsite - New York, NY Essential Duties and Responsibilities: • Serve as Project Manager/Project Engineer reporting to an experienced Project Executive at our New York City job sites, • Manage the project’s profit & loss to preserve profitability throughout the project’s life cycle., • Manage and maintain a healthy client relationship while protecting company interests., • Responsible for on-time project completion., • Assist in preparing Hardware Schedules, • Negotiate and execute contracts and purchase orders with subcontractors and suppliers., • Chair weekly and/or monthly project meetings with all interested stakeholders., • Communicate frequently and effectively to ensure the project team is well informed., • Actively support safety in the office, factory and on the job site., • Ensure all contract requirements, administrative or otherwise, are satisfied in a timely manner., • Identify and advocate internally for all resources necessary for project success., • Perform all other duties as may be assigned by the Project Executive or Division President., • B.S. Degree or A.S. in Engineering, Architecture, or Construction Management required. Certificated Construction Programs will also be considered., • Three to five years’ experience as PM in construction., • Experience with detention equipment and/or steel fabrication and installation., • Experience managing large project teams of diverse professionals preferred., • Ability to speak, read and write fluent English required., • Ability to successfully pass background/security check required., • Strong proficiency with MS Office required., • Proficiency with CAD, BIM and Bluebeam., • Effective time management and organizational skills., • Excellent verbal and written communication., • Use of manual dexterity, tactile, visual, and audio acuity., • Use of repetitive motion, prolonged periods of sitting and standing, and sustained visual and mental applications and demands., • Occasional lifting (up to 40 pounds), bending, pulling, and carrying., • Quantitative/mathematical ability (addition, subtraction, multiplication, division, standard measurements). Affirmative Action/EEO Statement MSP Corp. is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without discrimination because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, disability status, protected veteran status, or any other federal, state, or local protected class.

Job DescriptionSalary: 125,000-180,000 Title: Project Manager Job Summary Infinity Contracting Services, Corp. is actively seeking a highly motivated Project Manager for construction project(s) located in the five boroughs of New York City. We recognize our employees are the companys most valuable asset. Inspiration, diligence, and encouragement towards each other, coupled with purposeful work lead to a rewarding career, and we are proud to provide a platform with which our employees can attain their goals. Under the general direction of the Project Executive, the Project Manager provides effective leadership ensuring the construction schedules, safety, quality standards, customer satisfaction, trade partners' effectiveness, and maximum profitability are maintained throughout the projects progress. The Project Manager is accountable for the overall performance of the assigned project(s) and is responsible for understanding, planning, executing, controlling, monitoring, reviewing, and delivering the project with the support of the project team. Responsibilities and Duties * Review contract documents, clarify the scope and resolve discrepancies * Prepare projects budget and schedule of values * Identify permits, licenses, and procedures required in place prior to commencement of work * Create project-specific quality and safety standards * Review and complete buyouts, identify contract scope omissions and amend subcontracts as necessary * Generate a comprehensive project schedule, with the assistance of project team and trades involved, incorporating clients milestones and required phasing. Provide monthly schedule updates and revisions * Establish a streamlined process for pre-construction, construction, and project close-out phase * Procure major equipment * Track progress to ensure completion of work within target deadlines * Conduct monthly production control and cashflow projections meetings * Identify and resolve issues impacting budget and/or schedule * Screen RFIs, submittals, and other project deliverables for contract compliance * Review change order submissions * Review monthly payment requisitions and subcontractor payments * Review documents submitted in Procore for completeness * Enforce fulfillment of responsibilities following ICSC internal procedures * Assign tasks to project team and subcontractors based on priority, importance, and schedule * Attend meetings with owner, client, subcontractors, and staff * Coordinate in house manpower and resources with other project managers * Establish and maintain effective relationships internally and externally of ICSC * Lead and motivate project personnel to maximize their contribution and professional growth * Deliver ongoing feedback and address performance issues * Perform staff performance evaluations on a regular basis * Recognize training needs and ensure that staff gain needed skills * Suggest appropriate training opportunities and assignments * Engage staff in using best-practice tools and methodology * Direct construction activities of the subcontractors, laborers, and other staff as assigned Qualifications and Skills * Five-year minimum construction project management experience required * One+ years of site superintendent or engineer experience preferred * A NYS professional engineer license (PE) is required * Prior experience with MTA project management is preferred * Bachelors Degree or higher is preferred * Possession of OSHA 30, at a minimum, is required * Strong oral and written communication. * Excellent time management and communication skills

Job Description Apply Here: Pay: $110,000.00 - $120,000.00 per year Job description: Vitreoretinal Consultants, one of the largest providers of the Retina subspecialty within Ophthalmology is seeking an IT Technician to work in our NY offices. In this role, you will be an important part of the team whose job is to support the IT Manager in the delivery of exceptional retina care to our patients. This position requires dedicated individuals who enjoy working with staff and doctors. You will also be required to travel to our other locations in Great Neck, Westbury, Riverhead, Rockville Center, Hauppauge, Flushing, Scarsdale, Elmhurst and New City. To learn more about our business visit. This FT position is 95% IT and 5% Facilities management. The individual will work as a team member with our current IT and Facilities managers. Skills required: • Strong computer server maintenance experience, • The applicant MUST have a current Microsoft Certification as well as a current VM Ware certification., • Expert knowledge of IT best practices, policies, and regulations, • Willing to train staff, • In-depth understanding of programming, computer science and digital security, • A clear understanding of client/server technology and network architecture, • Good communication, including writing, speaking and active listening, • Strong problem-solving, critical thinking and decision-making skills, • Customer service and interpersonal skills, • Excellent attention to detail, • Great project management skills, including organization, planning, time management and prioritization. The IT Technician is responsible for several different tasks related to overseeing a company’s computer networks and improving the company’s network systems. Some of their daily responsibilities include: • Developing new network troubleshooting strategies to help reduce downtime and decrease maintenance costs., • Creating rational strategies for upgrading the company’s network software whenever a new update is available, • Constructing and implementing plans to ensure the company’s network continues to operate smoothly in the event of a problem, • Staying up to date with new network technology and reporting this information to the executive team each quarter, • Working closely with other department Managers to assess the growth needs and maintenance of the company’s network, • Run cables as needed, • Work with our software vendor ensuring servers are fully operating for all locations, troubleshoot and fix any downtime outages, • Create all employee network log ins and door access, • Monitor employee internet usage, • Assist the compliance officer to ensure SRA are performed yearly, • In charge of purchasing and installing all equipment and computer set-ups for employees and physicians, • Facility and Alarm system monitoring, alert CEO, CFO and/or Practice Administrator of any alerts, • Equipment inventory management, • Assist in Price shopping for new equipment, • Equipment problem trouble shooting, • Equipment installation Pay: $110,000.00 - $120,000.00 per year Benefits: • 401(k), • Health insurance, • Dental insurance, • Vision coverage, • Driver's License (Required) Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Education: • Bachelor's License/Certification: • Driver's License (Required), • VMware Certification (Required), • Microsoft Certified: Azure Data Engineer Associate (Required), • Microsoft Office Specialist (Required) Ability to Relocate:

Job DescriptionSummaryOur client is a leading IT Solutions Company located in the Yonkers, NY (Manhattan, NY area) and they are in need of a Level III IT Engineer. A qualified candidate would have both proven experience with technology and outstanding personal communication skills. You should enjoy building solutions that leverage technology to meet a client’s business needs. Duties & Responsibilities • Work with sales to provide pre- and post-sales support, including tasks such as discovery meetings, site visits, proposals and presentations, technical assessments, implementation, and ongoing technical account management., • Deploying and managing Windows Servers and Active Directory, • Designing Local Area Networks, • Implementing and monitoring network security, • Optimizing and maintaining network software and hardware, • Building and deploying file servers and cloud computing solutions, • Configuring and deploying VOIP solutions, • Performing network infrastructure troubleshooting, • Manage Microsoft Exchange Server, • Telephone solutions, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response., • New User On-boardingQualifications & Requirements, • Minimum of 5 years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • Having worked in an MSP environment is a MUST., • Three years of experience in a client-facing environment such as sales engineering, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management) tool a plus, such as Kaseya or Connectwise., • Experience with a PSA (ticketing system) tool a plus, such as Autotask or Connectwise., • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plusIdeal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert), • CCNA or CCIE-Cisco certifications a real plusOur client offers challenging work, career opportunities, a pleasant work environment, and ongoing training.

Job DescriptionSummaryOur client is a leading IT Solutions Company located in the Yonkers, NY (Manhattan, NY area) and they are in need of a Level III IT Engineer. A qualified candidate would have both proven experience with technology and outstanding personal communication skills. You should enjoy building solutions that leverage technology to meet a clients business needs. Duties & Responsibilities • Workwith sales to provide pre- and post-sales support, including tasks such as discovery meetings, site visits, proposals and presentations, technical assessments, implementation, and ongoing technical account management., • Deploying and managing Windows Servers and Active Directory, • Designing Local Area Networks, • Implementing and monitoring network security, • Optimizing and maintaining network software and hardware, • Building and deploying file servers and cloud computing solutions, • Configuring and deploying VOIP solutions, • Performing network infrastructure troubleshooting, • Manage Microsoft Exchange Server, • Telephone solutions, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response., • New User On-boardingQualifications & Requirements, • Minimum of 5 years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • Having worked in an MSP environment is a MUST., • Three years of experience in a client-facing environment such as sales engineering, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management) tool a plus, such as Kaseya or Connectwise., • Experience with a PSA (ticketing system) tool a plus, such as Autotask or Connectwise., • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plus Ideal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert), • CCNA or CCIE-Cisco certifications a real plus Our client offers challenging work, career opportunities, a pleasant work environment, and ongoing training.Employment Type: Full time Location: Yonkers, NY

Job Description Our client is a leading IT services firm that specializes in managed IT services, managed cybersecurity, cloud solutions, business process automation and strategic IT consulting. They are passionate about bringing enterprise-level productivity, scalability, and security to small and medium businesses. They provide nationwide, 24/7/365 IT support for all user devices, desktops, laptops, phones, concerns and how to questions. Looking for a candidate that meets the following criteria: Ideal candidate is high level 1 - level 2 Systems Engineer • Exceptional written and oral communication skills., • Experience troubleshooting the most difficult problems involving hardware and software, • Experience working with and troubleshooting new and unfamiliar software, • Ability to jump into new, complex, and unique environments and adapt quickly to diagnose and troubleshoot problems., • Exceptional interpersonal skills, with a focus on rapport-building, listening, and questioning skills., • Strong documentation skills., • Ability to mentor junior team members, • Strong technical background, • Windows 10, • Windows Server 2012-2019, • Office 365 and Exchange Administration, • Active Directory, • Group Policy, • LAN and WAN Networking, • Routing and Switching, • Firewall Rules, Services, and Configurations, • Hyper-V and/or VSphere/ESXi, • Network Printers and Deployment, • Advanced Hardware and Software Troubleshooting, • MSP Experience, • SonicWall, • Ubiquiti Equipment, • Connectwise Ticketing, • Screenconnect, • Solar Winds Backup, • Connectwise Automate Company DescriptionMola Group Corporation ( "Molaprise" ) is a New York-based information technology consulting and services firm for financial, investment firms and U.S public sector agencies, and small to mid-market, and enterprise firms. We are strategists, consultants, and business technology solutions providers focused on cybersecurity, cloud, and system integration. For more information visit: Molaprise is an Equal Opportunity Employer. Employment opportunities at Molaprise are based upon one's qualifications and capabilities to perform the essential functions of a particular job. All employment opportunities are provided without regard to race, religion, sex, pregnancy, childbirth or related medical conditions, national origin, age, veteran status, disability, genetic information, or any other characteristic protected by law. To read more about discrimination protections under Federal Law, please visit: (Get Acrobat Reader) If you have any difficulty using our online system and need accommodation in the job application process due to a disability, please send an email to for assistance.Mola Group Corporation ( "Molaprise" ) is a New York-based information technology consulting and services firm for financial, investment firms and U.S public sector agencies, and small to mid-market, and enterprise firms. We are strategists, consultants, and business technology solutions providers focused on cybersecurity, cloud, and system integration. \r\n\r\nFor more information visit: \r\n\r\n * \r\n\r\nMolaprise is an Equal Opportunity Employer. Employment opportunities at Molaprise are based upon one's qualifications and capabilities to perform the essential functions of a particular job. All employment opportunities are provided without regard to race, religion, sex, pregnancy, childbirth or related medical conditions, national origin, age, veteran status, disability, genetic information, or any other characteristic protected by law. \r\n\r\n\r\n\r\nTo read more about discrimination protections under Federal Law, please visit: (Get Acrobat Reader) \r\n\r\nIf you have any difficulty using our online system and need accommodation in the job application process due to a disability, please send an email to for assistance.

Job DescriptionSummary Our client is a leading IT Solutions Company in the Westchester County, NY (Harrison, NY)area and they are in need of aHelp Desk Support Level II+ Technician. An IT Technicians role is to ensure system operation and functionality so that end users can accomplish business tasks. The objective of the IT Technician will be to respond to support requests in a timely manner, be the initial reference point for all IT support related tickets, and to ensure the satisfaction of the end user, among other technical duties. Duties & Responsibilities • Provide support of incoming requests to the service desk via telephone, web portal, email to ensure courteous, timely, and effective resolution of end-user issues., • Provisioning and system setup for new hires., • Prioritize incidents and service requests according to defined processes to meet defined SLAs., • Use remote tools and diagnostic utilities to aid in resolving support requests., • Server administration via Active Directory, File & Print services, DNS, DHCP., • Install antivirus software and ensure virus definitions are up to date., • Server administration via Active Directory, File & Print services, DNS, DHCP., • Network firewall and switch administration and maintenance., • Optimizing and maintaining network software and hardware, • Building and deploying file servers and cloud computing solutions, • Configuring and deploying VOIP solutions, • Manage Microsoft Exchange Server, • Telephone solutions, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response.Qualifications & Requirements, • Having worked in an MSP environment is a MUST!, • Minimum of 4 years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • 2-3 years of experience in a client-facing environment such as sales engineering, • Kaseya RMM and Autotask PSA Experience a plus, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management) tool a plus, • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plus, • Having worked in an MSP environment is a major plus.Ideal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert), • CCNA or CCIE-Cisco certifications a real plus Our client offers challenging work, career opportunities, a pleasant work environment, and ongoing training.Employment Type: Full time Location: Harrison, NY

Job DescriptionSummary Our client is a leading IT Solutions Company in the Westchester County, NY (Harrison, NY) area and they are in need of a Help Desk Support Level II+ Technician. An IT Technician’s role is to ensure system operation and functionality so that end users can accomplish business tasks. The objective of the IT Technician will be to respond to support requests in a timely manner, be the initial reference point for all IT support related tickets, and to ensure the satisfaction of the end user, among other technical duties. Duties & Responsibilities • Provide support of incoming requests to the service desk via telephone, web portal, email to ensure courteous, timely, and effective resolution of end-user issues., • Provisioning and system setup for new hires., • Prioritize incidents and service requests according to defined processes to meet defined SLAs., • Use remote tools and diagnostic utilities to aid in resolving support requests., • Server administration via Active Directory, File & Print services, DNS, DHCP., • Install antivirus software and ensure virus definitions are up to date., • Server administration via Active Directory, File & Print services, DNS, DHCP., • Network firewall and switch administration and maintenance., • Optimizing and maintaining network software and hardware, • Building and deploying file servers and cloud computing solutions, • Configuring and deploying VOIP solutions, • Manage Microsoft Exchange Server, • Telephone solutions, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response.Qualifications & Requirements, • Having worked in an MSP environment is a MUST!, • Minimum of 4 years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • 2-3 years of experience in a client-facing environment such as sales engineering, • Kaseya RMM and Autotask PSA Experience a plus, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management) tool a plus, • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plus, • Having worked in an MSP environment is a major plus.Ideal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert), • CCNA or CCIE-Cisco certifications a real plusOur client offers challenging work, career opportunities, a pleasant work environment, and ongoing training.

Troubleshoot industrial plant automation equipment networks, sensors, and control. This role routinely uses standard office equipment such as computers, phones, photocopiers. This job will require going out in the field and various organizations to utilize and troubleshoot computer equipment.

Troubleshoot industrial plant automation equipment networks, sensors, and control. This role routinely uses standard office equipment such as computers, phones, photocopiers. This job will require going out in the field and various organizations to utilize and troubleshoot computer equipment.

Mechanical Engineering, Electrical Engineering, or related field. This role is responsible for creating and optimizing designs, conducting engineering analyses, and collaborating with cross-functional teams to deliver innovative, high-quality products. Experience using engineering analysis tools suc

Diesel Mechanic, Mechanic, Fleet Mechanic, Lube Technician, Heavy Equipment Mechanic, Lube Technician, Auto Mechanic, Automotive Mechanic, Technician1, MTest2025 Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability,

Engineering: ASML US, LP, a lithography development and manufacturing company for the semiconductor industry, has the following position(s) available in Wilton, CT: Mechatronics Engineer (C8093798) Software Engineer (C8746731) Senior PLM Project Coordinator (C8700269) Senior PLM Project Coor

CVS Health company, is hiring for the following roles in Norwalk, CT: Staff Pharmacist (R0705002) to Dispense drugs prescribed by physicians and other health practitioners and provide information to patients about medications and their use.Position may require work at additional pharmacy store locat

Electronics Technicians Navigation (ETV) are responsible for maintaining all electronic equipment used in navigating and piloting submarines. Maintaining, repairing, calibrating, tuning and adjusting navigation equipment. Maintaining equipment used to detect, identify and track other maritime vessel

As a Field Engineering Technician you will be responsible for:. Providing clients with advanced on-site troubleshooting and on-site installation & removal of equipment.

Manufactures products in accordance processing batch records using manual and semi-automated equipment. Maintains and calibrates equipment as needed. Troubleshoots equipment and process problems.

Operate radiographic equipment, adjusting techniques as necessary for patient condition and area of interest.

Moves imaging equipment into the specified position; determines exposure factors based on height, weight, the portion of the body involved, and the degree of penetration required; and adjusts equipment controls to set exposure factors and produce images of proper detail, density, and accuracy.

Are you looking to Optimize your life? Start your exciting path to a rewarding career today!.We are Optimum, a leader in the fast-paced world of connectivity, and we're on the hunt for enthusiastic professionals to join our team! We understand that connectivity isn't just a luxury anymore - it's a n

Stock, inventory and maintain various equipment such as response bags, medical devices and specialty items such as cots, communications equipment, tents, vehicles and trailers. Inform supervisor of breakdowns, damages or out of service equipment. Respond to daily phone and email inquiries from other

They also assist physicians during procedures to correct arrhythmias, such as cardiac ablation, by monitoring patients' vital signs and cardiac rhythms and helping to operate equipment.

Ensure MRI safety protocols are strictly followed to protect patients, staff, and equipment.

We're looking for an engineering team lead for 4-10 engineers. Ability to attract, hire, and coach world-class engineers. This is a perfect opportunity for someone to grow into an engineering manager within a 12-month horizon.

Electrical Engineer Job Duties: Evaluates electrical systems, products, components, and applications by designing and conducting research programs; applying knowledge of electricity and materials. Deve

The Field Engineer is responsible for planning and executing, with minimal professional guidance, complex semi-technical field assignments involving the installation, modification, testing, inspection, or repair of company products and equipment. Solid understanding of engineering concepts and pract

We’re seeking a skilled Drafter to join the Panel Division of one of our clients.You’ll play a key role in supporting project managers by creating, modifying, and reviewing shop drawings for high-quality architectural panel projects.This role is ideal for someone with strong CAD experience, blue

Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; and requesting special services. Mechanical Engineer Job Duties:

Were seeking a skilled Drafter to join the Panel Division of one of our clients.Youll play a key role in supporting project managers by creating, modifying, and reviewing shop drawings for high-quality architectural panel projects.This role is ideal for someone with strong CAD experience, blueprint

Administer and engineer CyberArk for integrating privileged accounts across on-premises and cloud environments, including Azure. Processes Service Desk tickets assigned to the Engineering team. The IAM & PAM Engineer will be responsible for ensuring that Altice USA's Identity & Access Management and

Provide consulting services to solve operations engineering problems. Provide engineering support to operations team in achieving business goals.

Working to ensure all customer needs are met in a kind and sympathetic way, our project technicians assist their teams and supervisors with all aspects of restoration work on residential and commercial jobsites, as well as maintain vehicles, equipment, and assets of the business. Regular Vehicle and

Working to ensure all customer needs are met in a kind and sympathetic way, our project technicians assist their teams and supervisors with all aspects of restoration work on residential and commercial jobsites, as well as maintain vehicles, equipment, and assets of the business. Regular Vehicle and