Trabajos equipment engineer en Yonkers, New YorkCrear alertas

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job Description Overview Opportunity: Engineer Perform preventative and repair maintenance work to ensure the hotel is maintained according to established quality and sustainability standards while treating guests in a warm and friendly manner. Your Growth Path Engineering Supervisor – Chief Engineer – Area Chief Engineer Your Focus • Conduct room inspections and identify repair needs., • Install or repair sheetrock and other wall coverings., • Paint designated areas and items., • Install and replace basic electrical fixtures, replace light switches, receptacles, light bulbs and fixtures., • Repair furniture., • Install, replace and program televisions., • Perform minor plumbing functions., • Replace and repair heating and cooling pumps as well as preventative maintenance on units., • Trace and repair all types of water lines., • Troubleshoot and repair kitchen equipment., • Maintain repair and preventive maintenance records., • Perform and maintain work to local, state and Federal codes., • Be aware of guest satisfaction scores and work toward increasing departmental and overall guest satisfaction., • Work as a bell attendant in the event of staffing shortages or during peak check in/out periods., • Follow Service Recovery Guidelines., • Practice safe work habits, wear protective safety equipment and comply with MSDS and OSHA standards., • Ensure overall guest satisfaction., • Perform other duties as requested by management. Your Background and Skills • High School diploma and Trade school course work in related field preferred., • Previous engineer/maintenance experience or equivalent training required. HHM Hotels Benefits and Perks • Competitive wages for full time and part time opportunities, • Medical, Dental and Vision Health Insurance, • Paid Time Off, • 401k Company Match, • Daily Pay, • Free Basic Life Insurance, • 24/7 access to TELUS Health, a confidential work-life resource., • Travel Discounts, • Commuter Transit and Commuter Parking Benefits, • Employee Assistance and Wellness Program, • Educational/Professional Development, • Referral Bonus Program Work Context • Work schedule varies and may include working on holidays and weekends and alternate shifts., • Requires standing for extended periods, walking, pushing, lifting up to 50 pounds, bending and reaching, kneeling, stooping, crawling and climbing. What We Believe People Are Our Capability – Hearts That Serve – Only Excellence – Stay Nimble – Own It

About Company At ENNOVI we harness the power of two megatrends - electrification and AI - to help industries innovate at speed, operate smarter, and achieve sustainable growth. By combining these transformative forces with our global reach and best talent, we empower our customers to lead their markets and drive sustainable progress. From automotive to aerospace, consumer electronics, data storage, industrial, and medical markets, we help our customers achieve these megatrends by creating smarter, safer, and more sustainable solutions. We excel in developing high-performance, custom solutions that meet diverse technical needs, solve unique challenges, optimize performance, and adapt to evolving market demands. Our mission is to get customers to the future faster, from anywhere. Headquartered in Singapore, ENNOVI has a global presence across North America, Europe, SEA and China, where all its activities are socially responsible, with minimal environmental impact. Learn more at . Why Join Us At ENNOVI, we envision a future of electrification and innovation and strive to create an inspiring workplace where our employees are integral to shaping that future. We offer a dynamic, collaborative, and inclusive culture that encourages continuous learning, professional growth, and a sense of purpose. As a part of the ENNOVI team, employees experience the excitement of being at the forefront of cutting-edge technologies and contributing to a sustainable future. Our commitment to the transformation is epitomized by our five pillars: Speed, Innovation, Best Talent, Global Reach, and Sustainability. This entails navigating exponential market changes through agile structures, fostering innovation across all aspects of our business, strategically expanding our global footprint, championing sustainability initiatives and nurturing a winning team. Privacy Policy By applying to this job posting, you agree with and acknowledge our privacy policy. Job Summary The Manufacturing Engineer in Northvale is responsible for designing, implementing, and optimizing production processes to improve efficiency, reduce costs, and maintain quality. This person will be analyzing production data, managing production schedules, and developing new technologies. They will also ensure that products are manufactured effectively and meet quality standards. The Manufacturing Engineer will collaborate with their team and demonstrate ENNOVI’s values of accountability, teamwork, and integrity. Main Responsibilities • Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout., • Analyzing and controlling manufacturing costs, including material, labor, and production costs., • Identifying areas for process improvement and implementing changes to enhance efficiency and reduce waste., • Working with other engineers, designers, and production staff to achieve manufacturing goals., • Developing and implementing quality control procedures to ensure products meet defined standards., • Orchestrating all pre-launch build activities, including prototype, pilot, and validation runs, to ensure factory readiness and a "non-event" transition to full-volume production for the customer. Qualifications • Bachelor's degree in engineering, quality, or related technical discipline., • Minimum of 3 years in Manufacturing Engineering, • Proven hands-on experience with injection molding and/or metal stamping is required., • High-stakes Automotive industry experience is a major plus., • A tactical ability to diagnose and neutralize complex technical issues on the production floor., • Ability to identify and solve technical problems related to manufacturing processes., • Sharp analytical skills to translate raw data into actionable manufacturing trends and decisions., • Ability to manage and control manufacturing costs., • Great attention to detail, organizational skills, and ability to meet deadlines., • Can lift up to 25 lbs

Role Overview We are seeking a highly skilled and proactive Environment, Health, & Safety (EHS) Manager to lead safety initiatives and ensure compliance with OSHA, EPA, and NFPA regulations across our warehouse operations. This role is critical in developing and implementing EHS programs, conducting audits, managing risk assessments, and fostering a strong safety culture within the organization. The ideal candidate will have 5+ years of EHS experience in warehouse operations, with a deep understanding of workplace safety practices, regulatory compliance, and incident investigation. Strong leadership, reporting, and communication skills are essential to drive continuous improvement in safety standards and operational excellence. Key Responsibilities • Provide EHS support to ensure a safe and quality working environment in compliance with government regulations and company procedures together with warehouse fire regulations., • Assist with the completion of various EHS related projects/tasks., • Process Safety Engineer with expertise in hazardous materials handling, risk mitigation, and regulatory compliance., • Develop and implement various NA EHS written programs, procedures, and work instructions., • Assist in ergonomic assessments and improvements., • Conduct regulatory safety audits utilizing the iAuditor tool., • Review, develop and implement specific EHS training programs., • Assist with coordination and implementation of EHS related training., • Audit all WH operational training program and report monthly (including EHS related and WH operation – MHE, Handling, etc.), • Investigate accidents and incidents., • Create, maintain, and oversee the compliance calendar for all regulatory requirements., • Conduct risk assessments, job safety analysis, and other evaluations as necessary., • Maintain training records and OSHA logs and prepare periodic reports for review., • Identify and take corrective action against activities that pose potential threats to workers’ health or safety, which may include recommending organizational measures to protect workers’ safety through revised methods, processes, or materials; inspecting workplace environments, equipment, and/or practices to ensure compliance with standards and regulations; and investigating and/or identifying causes regarding filed incidents., • Help design and implement the EHS programs and culture throughout LX Pantos’ warehouse operation for its clients, including LG Electronics., • Administration work for safety part/team for Approval process and payment. Qualifications: • Minimum of 3 years of experience specifically in an EHS manager position with over 5 years of overall experience of EHS in warehouse operation., • Bachelor’s degree in occupational safety (OSHA), Fire Protection Engineering (NFPA), or a related field., • Environment, Health, & Safety related major is preferred., • Bilingual in English and Korean (preferred)., • Ability to give and make reports (required)., • Proficiency in Microsoft Office Suite (Excel, PowerPoint, Word, Teams)., • In-depth understanding of safe workplace practices and programs., • Familiarity with OSHA and EPA regulations and other applicable EHS laws and guidelines., • Excellent interpersonal and communication skills, both written and verbal., • Ability to multi-task., • Will be required to stand, sit, and walk for long periods of time (e.g., facility audit may require several hours of walking)., • Business travel may be necessary., • Preferred experience with ISO 45001. This position is not eligible for employer-sponsored work authorization now or in the future. Applicants must be legally authorized to work in the United States without employer sponsorship.

Company Description Asset Inventories, Inc., headquartered in Midtown Manhattan since 1992, is a leading provider of IT staffing, inventory management, and IT support services. With additional offices across North America, including Montreal, Toronto, and Los Angeles, the company serves Fortune 100 companies, government agencies, and globally recognized organizations. Specializing in IT asset management, hardware and software support, cloud-based inventory solutions, and custom software development, Asset Inventories is committed to delivering reliable and innovative solutions. Our expertise extends to high-pressure environments like trading floors, making us a trusted partner in IT project management and operations. Job Type - Contract to hire Pay - $30 - $40 per hour Job description: We are seeking a highly skilled Data Center Engineer Consultant to join our team at Palisades, NJ. Responsibilities • Gather requirements, perform physical installation, and troubleshoot all equipment within the Data Centers., • Coordinate with local and global/remote teams to resolve technical issues and manage connectivity., • Monitor and report on technical progress, ensuring project deliverables are tracked and met., • Maintain clean, organized, and safe Data Center and shared workspace environments., • Leverage global Data Center documentation and best practices; suggest improvements and update process documentation as needed., • Manage equipment orders, returns, shipments, and overall inventory accuracy., • Solid understanding of Data Center operations and layout, including power, cooling, racking, cabling, and structured pathways., • Good understanding of networking and systems fundamentals (circuits, IP routing, console access, switching concepts)., • Working knowledge of Linux (Red Hat preferred)., • Basic Cisco knowledge (CCNA preferred)., • Hands-on experience with copper and fiber cabling; ability to inspect, clean, test, and validate fiber (preferred)., • Experience working in an exchange, financial services environment, or international technology firm (preferred)., • Technical inventory management experience (preferred)., • Able to lift, move, and carry equipment typically used in a Data Center (servers, switches, UPS units, cabling boxes), up to 50 lbs unassisted., • Comfortable working on your feet for extended periods (up to 8–10 hours during installation windows)., • Able to climb ladders, work in confined spaces, and navigate hot/cold aisle environments., • Comfortable performing overhead work, bending, kneeling, and repetitive physical tasks., • Ability to work in secure, noisy, or temperature-variant environments typical of large-scale Data Centers.

Test Engineer - Cutting Edge Space & Defense Products! This Jobot Job is hosted by: Stephen Brainerd Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $50 - $96 per hour A bit about us: With numerous offices across the country we are an industry leading Space Hardware Development company. We specialize in the design, manufacture, integration, and test of critical spacecraft components. We are a team of accomplished engineers and operations personnel with a diverse range of critical skills, decades of mission experience, and a passion to develop unique component solutions for space applications. If you are an experienced, Test Engineer with strong electro-mechanical background, then please apply! Why join us? Do you want to work with some of the nation’s best Clients like NASA and Boeing? We do too! • Meaningful Work!, • Best in Class Firm!, • Gold Level PPO Heath Insurance - 75% Covered!, • Competitive Compensation Package!, • Benefits Package!, • Accelerated Career Growth!, • Fun Company Activities!, • Many More! Job Details Responsibilities: 1. Support hands-on test operations, including the fabrication and assembly of electro-mechanical Ground Support Equipment., 2. Conduct testing of development and flight hardware to ensure optimal performance and compliance with all safety standards., 3. Document and record specialized test set-up configurations to ensure consistent and repeatable test results., 4. Utilize various test equipment, such as DMM, oscilloscope, etc., to assess and improve product performance., 5. Use various hand and power tools, such as drill, calipers, etc., to perform necessary adjustments and modifications., 6. Work with electrical components and systems, ensuring their proper installation and functionality., 7. Perform soldering tasks as required, adhering to all safety and quality standards. Qualifications: 1. Bachelor’s Degree in Engineering or a related field., 2. 2+ years of experience in a similar role within the aerospace or space industry., 3. Hands-on experience in the fabrication and assembly of Ground Support Equipment or similar., 4. Demonstrated experience in testing development and flight hardware., 5. Proficient in documenting and recording specialized test set-up configurations., 6. Experience using various test equipment, such as DMM, oscilloscope, etc., 7. Skilled in using various hand and power tools, such as drill, calipers, etc., 8. Solid knowledge and experience working with electrical components and systems., 9. Proficiency in soldering, with a keen eye for detail and quality., 10. Excellent problem-solving skills, with the ability to troubleshoot and resolve issues efficiently. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionSummaryOur client is a leading IT Solutions Company located in the Yonkers, NY (Manhattan, NY area) and they are in need of a Level III IT Engineer. A qualified candidate would have both proven experience with technology and outstanding personal communication skills. You should enjoy building solutions that leverage technology to meet a client’s business needs. Duties & Responsibilities • Work with sales to provide pre- and post-sales support, including tasks such as discovery meetings, site visits, proposals and presentations, technical assessments, implementation, and ongoing technical account management., • Deploying and managing Windows Servers and Active Directory, • Designing Local Area Networks, • Implementing and monitoring network security, • Optimizing and maintaining network software and hardware, • Building and deploying file servers and cloud computing solutions, • Configuring and deploying VOIP solutions, • Performing network infrastructure troubleshooting, • Manage Microsoft Exchange Server, • Telephone solutions, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response., • New User On-boardingQualifications & Requirements, • Minimum of 5 years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • Having worked in an MSP environment is a MUST., • Three years of experience in a client-facing environment such as sales engineering, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management) tool a plus, such as Kaseya or Connectwise., • Experience with a PSA (ticketing system) tool a plus, such as Autotask or Connectwise., • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plusIdeal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert), • CCNA or CCIE-Cisco certifications a real plusOur client offers challenging work, career opportunities, a pleasant work environment, and ongoing training.

Job Description Electrical Engineer, Circuit Design We are seeking an Electrical Engineer to design and program electrical systems. • Ability to work within Electrical Engineering’s R&D and Manufacturing teams, you will be designing and developing state-of-the-art digital controllers & control systems, including related software, for operating our specialized equipment., • PLC- Allen Bradley, Rockwell preferred, not required., • The ideal candidate should have the ability to work with test equipment such as oscilloscopes, logic analyzers, and in-circuit emulators., • You will need to possess the ability to work with C, C++. Additional knowledge of languages such as C#, Visual Basic, VBA and Assembler would be a plus, not a requirement, as would be working knowledge of embedded systems, including microprocessors (8 to 32 bit) and support hardware., • Knowledge of industrial data communications protocols would be an asset, although not required., • The ability to read schematics and interpret hardware to facilitate software design is a requirement., • The ideal candidate should have the ability to work with test equipment such as oscilloscopes, logic analyzers, and in-circuit emulators., • Proficiency in AutoCAD, or AutoCAD electrical preferred, electrical design, analysis, and simulation tools, • Panel layout and design preferred, • BOM exposure preferred, not required, • Solid understanding of electronic components and their applications., • Relevant experience in electrical engineering, product design, or a related field., • Demonstrated ability to think creatively and contribute to the development of innovative solutions., • Safely and effectively lift, carry, and move objects of varying weights., • Bending, stooping, kneeling, reaching, climbing, balancing, standing, and walking, for extended periods and maintain the necessary physical dexterity and coordination. Degree in electrical engineering, Industrial Engineering, Mechanical Engineering and/or Computer Science, similar or equivalency years of experience Looking forward to getting to know you... We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job DescriptionSummaryOur client is a leading IT Solutions Company located in the Yonkers, NY (Manhattan, NY area) and they are in need of a Level III IT Engineer. A qualified candidate would have both proven experience with technology and outstanding personal communication skills. You should enjoy building solutions that leverage technology to meet a clients business needs. Duties & Responsibilities • Workwith sales to provide pre- and post-sales support, including tasks such as discovery meetings, site visits, proposals and presentations, technical assessments, implementation, and ongoing technical account management., • Deploying and managing Windows Servers and Active Directory, • Designing Local Area Networks, • Implementing and monitoring network security, • Optimizing and maintaining network software and hardware, • Building and deploying file servers and cloud computing solutions, • Configuring and deploying VOIP solutions, • Performing network infrastructure troubleshooting, • Manage Microsoft Exchange Server, • Telephone solutions, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response., • New User On-boardingQualifications & Requirements, • Minimum of 5 years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • Having worked in an MSP environment is a MUST., • Three years of experience in a client-facing environment such as sales engineering, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management) tool a plus, such as Kaseya or Connectwise., • Experience with a PSA (ticketing system) tool a plus, such as Autotask or Connectwise., • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plus Ideal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert), • CCNA or CCIE-Cisco certifications a real plus Our client offers challenging work, career opportunities, a pleasant work environment, and ongoing training.Employment Type: Full time Location: Yonkers, NY

Job Title: Sales Engineer (Outside Sales) Hours: Full Time Position Salary Range: Base + Commission (salary based on experience) Location: Larchmont, NY Work Location: On the road Thermal Systems Associates serves the heating/cooling, plumbing and industrial process industries as a leading manufacturer’s representative. We are seeking an individual to contact commercial contractors and specifying engineers in the New York City/ Northern New Jersey area. Estimated compensation for this role is based on experience + Commission. Benefits offered. Key Duties and Responsibilities: • Actively calls on contractors and specifying engineers in person., • Attends job site visits., • Finalizes proposals with mechanical contractors., • Provides technical literature to customers and engineers. Required Skills and Proficiencies: • Knowledge of VRF systems, manufacturers, and products., • Knowledge of air side mechanical equipment. Preferred Work-Related Experiences: • Experience as an outside salesperson., • Experience as a specifying engineer in a qualifying field or industry, • Experience as an installing contractor or project manager. Preferred Educational Background: • Bachelors in engineering or other technical related field To apply, please include a resume listing your education and work experience. Based on your credentials you will be offered a chance for an in-person interview with our management team.

Operating Engineer - Critical Environments. The Operating Engineer - Critical Environments will have a strong focus on operating, maintaining, troubleshooting and repairing facility equipment on all systems.

They will also be trained to directly supervise bargaining unit reactor operators and equipment operators generally. Power Plant Watch Engineer, Engineering Watch Supervisor, Reactor Operator, Engineering Officer of the Watch, Propulsion Plant Watch Supervisor). Constellation is seeking Initial Lice

Job DescriptionJob Title: Medical Equipment Engineer IIIPosition Summary The Medical Equipment Engineer III serves as a senior technical expert responsible for providing advanced-level installation, troubleshooting, maintenance, and repair of medical and dental equipment both remotely and on-site. This role requires expert technical knowledge, exceptional customer service skills, and the ability to lead and mentor junior engineering staff. The Engineer III acts as a technical escalation point, ensures service excellence, and supervises Medical Equipment Engineer I and II team members while contributing to continuous improvement initiatives and internal training. Key Responsibilities • Provide expert-level technical support for complex dental equipment issues, both remotely and on-site, • Serve as the primary escalation point for unresolved or advanced technical cases from Engineer I and II staff, • Install, configure, inspect, test, and validate advanced dental equipment at customer sites, • Diagnose complex system failures and recommend corrective actions and long-term solutions, • Lead on-site service activities for critical installations, upgrades, retrofits, and major repairs, • Supervise, mentor, and provide technical guidance to Medical Equipment Engineer I & II team members, • Support onboarding and training of new engineers, including field shadowing and skills development, • Review service documentation for accuracy, completeness, and compliance with company standards, • Communicate clearly and professionally with customers, vendors, and internal stakeholders to resolve issues and manage expectations, • Monitor and analyze service metrics such as resolution time, repeat service calls, and customer satisfaction, • Collaborate with engineering, quality, and product teams to provide feedback on equipment performance and design improvements, • Support internal process improvement initiatives and contribute to best-practice development, • Travel regularly to client sites (average 2–7 days per assignment) and provide leadership during multi-day or complex service engagements, • Ensure safe handling, transport, setup, and operation of equipment (up to 50 lbs), • Perform other duties as assigned by managementSupervisory Responsibilities, • Directly supervises Medical Equipment Engineer I and II positions, • Provides performance feedback, coaching, and technical development support, • Assists management with workload planning, scheduling, and skills assessmentsRequired Qualifications, • Associate degree required; Bachelor’s degree in Biomedical Engineering, Electronics, or a related technical field preferred, • 5+ years of hands-on experience servicing medical or dental equipment, with demonstrated advanced troubleshooting expertise, • Prior experience mentoring, leading, or supervising technical staff, • Strong mechanical, electrical, and diagnostic skills across a broad range of clinical equipment, • Proven ability to communicate complex technical information clearly to customers and internal teams, • Excellent customer service, interpersonal, and conflict-resolution skills, • Proficiency in Microsoft Office (Word, Excel, Outlook) and service documentation systems, • Valid driver’s license and ability to travel regularly, • Ability to work independently, prioritize tasks, and manage multiple complex service cases, • Must be able to kneel, bend, stand for extended periods, work in tight spaces, and lift up to 50 pounds

Job Description Electrical, Controls Engineer - Industrial Electro-Mechanical Machinery Industry Focus: Industrial Machinery I Electromechanical Equipment I Custom Automation Systems Robotics I Industrial Controls I Food and Beverage Manufacturing I Packaging Equipment I Water and Wastewater Treatment I Process Equipment I OEM Machine Building We are currently seeking to identify (2) Electrical Controls Engineers to join a well-established and growing industrial equipment manufacturer with over 50 years of engineering excellence. One opportunity is ideal for a junior to mid-level candidate with at least 2+ years of relevant experience, and the other is targeted for a senior-level engineer with more years of hands-on experience in electrical design, programming, controls, and industrial automation. This is your chance to join a team that builds large-scale electromechanical systems from concept through completion. From food production lines to custom process and water treatment equipment, you'll be working on machinery that makes a real-world impact. Responsibilities: · Design, develop, and program industrial electrical control systems to meet engineering and client requirements · Create electrical schematics, wiring diagrams, and panel layouts using AutoCAD Electrical or similar design software · Specify, select, and configure control system components such as PLCs, VFDs, relays, sensors, and breakers · Program PLCs and HMIs (Allen-Bradley, Siemens, or similar platforms preferred) · Layout and design control panels and motor control centers (MCCs) · Perform validation testing and troubleshoot electrical systems during build and final assembly · Collaborate closely with mechanical engineers, software engineers, and production teams to ensure full integration · Provide technical documentation including BOMs, manuals, wiring lists, and startup procedures · Travel as needed for commissioning and system validation (minimal and planned in advance) · Stay current with evolving industry technology, best practices, and safety standards Qualifications: We are hiring for two experience levels. Candidates must meet the criteria for one of the following profiles: Junior to Mid-Level Role: · Minimum 2 years of experience in electrical controls, panel design, or related engineering environment · Experience with AutoCAD Electrical or similar drafting tools · Working knowledge of industrial components and safety regulations · Basic PLC programming knowledge or exposure to automation software · Strong interest in hands-on engineering, testing, and troubleshooting · Bachelor's degree in Electrical Engineering or equivalent hands-on experience Senior-Level Role: · Experience in electrical controls and industrial automation · Proficiency in AutoCAD Electrical and strong PLC/HMI programming experience · Deep understanding of UL, NEC, NFPA 70E, and electrical safety standards · Demonstrated success leading projects or contributing to complex custom machinery builds · Ability to mentor junior team members and drive design improvements · Background in electromechanical system design and manufacturing support What Makes This Opportunity Unique: · Privately owned and financially strong company with over 50 years of proven success · All engineering and manufacturing is done in-house at our US-based facilities · Recession-resistant with projects in food processing, water treatment, packaging, and more · Work directly on high-impact custom systems from design to completion · Short lead times and an integrated design-build process · Access to a seasoned engineering team for mentorship and collaboration · Competitive salary structure with performance bonuses · Opportunities for growth into technical leadership or project management · Continued access to learning and development in electrical, automation, and mechanical engineering · Team-focused culture that values practical problem-solving, quality, and innovation Traits That Set You Up for Success: · Detail-oriented and self-driven with a strong sense of accountability · Hands-on mindset and curiosity to understand how systems work · Enjoy working on one-off and custom systems that challenge your engineering creativity · Collaborative and open communicator, ready to share and receive feedback · Willing to dive into troubleshooting and help bring machines across the finish line · Honest, reliable, and committed to continuous improvement Take the Next Step in Your Career: If you are passionate about industrial electrical systems and automation, whether you are building your skills or bringing a wealth of experience, we want to hear from you. These roles offer the chance to work on meaningful projects with a stable, growing company where your contributions matter every day. Apply now to explore how you can be a part of building the next generation of industrial automation and electromechanical systems. Equal Opportunity Commitment: We and our client are equal opportunity employers and welcome all qualified applicants regardless of race, religion, gender, age, disability, veteran status, or any other protected classification.

Job DescriptionCompany Description VERSANT is a leading force in news, sports and entertainment - home to iconic and trusted brands that inspire, inform, and delight audiences. Our unique combination of content, technology and services enriches the cultural fabric, igniting passions, sparking conversations, and connecting people to what they love most. As an independent, publicly traded company, VERSANT brings together powerhouse cable networks - including USA Network, CNBC, MS NOW (formerly MSNBC), Oxygen, E!, SYFY, and Golf Channel - with dynamic digital and direct-to-consumer brands such as Fandango, Rotten Tomatoes, GolfNow, GolfPass, and SportsEngine. Together, these businesses reflect our commitment to delivering exceptional experiences across every screen and service. VERSANT is an industry-changing media company fueled by innovation and an entrepreneurial spirit. With a strong foundation and a forward-looking vision, VERSANT empowers creativity, embraces change, and drives connection in an ever-evolving world. Job Description At Versant Media, we believe in the talent of our people. It’s our passion and commitment to excellence that drives Versant’s vast portfolio of brands to succeed. From broadcast and cable networks, news and sports platforms, to film, world-renowned theme parks and a diverse suite of digital properties, we take pride in all that we do and all that we represent. It’s what makes us uniquely Versant. Here you can create the extraordinary. Join us. Versant Media is seeking a dedicated Production Support Engineer to join our dynamic Production Media Engineering group. The ideal candidate will be responsible for ensuring seamless on-air productions by supporting all production systems at Versant Media Locations in Englewood Cliffs, NJ and New York, NY. This also includes our Remote Production sites in Washington DC and West Coast locations in LA and San Francisco. You will be troubleshooting, diagnosing, and solving any technical issues that arise during live broadcasts and production control rooms, studios, distribution/automation, master control, and related equipment for all Versant Properties. This role is pivotal to Versant Media’s commitment to deliver high-quality news, sports, and entertainment 24/7. You will be maintaining the integrity of cutting-edge broadcasting technology and collaborating with Engineering and Operations to optimize broadcast workflows in a fast-paced environment. Qualifications The ideal candidate will have knowledge and experience in the following areas: • Strong understanding of digital & signal workflows., • Up to date with industry trends and emerging technologies., • Ability to work alone as a lead and as part of a team., • 5+ years of recent experience supporting live, television production environments. PREFERRED QUALIFICATIONS: • Knowledge of SMPTE 2110 standards., • Knowledge and experience with VizRT, Ross, and Chyron., • Experience with Transmission, Fiber, and Encode/Decode Distribution and Transport Systems., • Experience with Cloud and VM Based applications and planforms., • Ability to read and interpret AutoCAD drawings., • Proficiency with AUTOCAD, MS Office Suite, Windows, Linux, Mac OS., • Experience with JIRA, Confluence and other project and ticketing systems., • Technical enthusiasm and an eagerness to never top learning. Additional Information As part of our selection process, external candidates may be required to attend an in-person interview with a VERSANT Media employee at one of our locations prior to a hiring decision. VERSANT Media's policy is to provide equal employment opportunities to all applicants and employees without regard to race, color, religion, creed, gender, gender identity or expression, age, national origin or ancestry, citizenship, disability, sexual orientation, marital status, pregnancy, veteran status, membership in the uniformed services, genetic information, or any other basis protected by applicable law. If you are a qualified individual with a disability or a disabled veteran and require support throughout the application and/or recruitment process as a result of your disability, you have the right to request a reasonable accommodation. You can submit your request to . VERSANT Media is committed to fair and equitable compensation practices. We include a good faith pay range for each position to comply with applicable state and local pay transparency laws and to promote equity across our organization. Actual compensation will be based on factors such as the candidate's skills, qualifications, experience, and location and may include additional forms of compensation and benefits such as health insurance, retirement plans, paid time off, etc. VERSANT Media is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee at VERSANT via-email, the Internet, or in any form and/or method without a valid written Statement of Work in place for this position from VERSANT's Talent Acquisition team will be deemed the sole property of VERSANT. No fee will be paid in the event the candidate is hired by VERSANT as a result of the referral or through other means.

Job DescriptionCompany Description VERSANT is a leading force in news, sports and entertainment - home to iconic and trusted brands that inspire, inform, and delight audiences. Our unique combination of content, technology and services enriches the cultural fabric, igniting passions, sparking conversations, and connecting people to what they love most. As an independent, publicly traded company, VERSANT brings together powerhouse cable networks - including USA Network, CNBC, MS NOW (formerly MSNBC), Oxygen, E!, SYFY, and Golf Channel - with dynamic digital and direct-to-consumer brands such as Fandango, Rotten Tomatoes, GolfNow, GolfPass, and SportsEngine. Together, these businesses reflect our commitment to delivering exceptional experiences across every screen and service. VERSANT is an industry-changing media company fueled by innovation and an entrepreneurial spirit. With a strong foundation and a forward-looking vision, VERSANT empowers creativity, embraces change, and drives connection in an ever-evolving world. Job Description At Versant Media, we believe in the talent of our people. It’s our passion and commitment to excellence that drives Versant’s vast portfolio of brands to succeed. From broadcast and cable networks, news and sports platforms, to film, world-renowned theme parks and a diverse suite of digital properties, we take pride in all that we do and all that we represent. It’s what makes us uniquely Versant. Here you can create the extraordinary. Join us. Versant Media is seeking a dedicated Production Support Engineer to join our dynamic Production Media Engineering group. The ideal candidate will be responsible for ensuring seamless on-air productions by supporting all production systems at Versant Media Locations in Englewood Cliffs, NJ and New York, NY. This also includes our Remote Production sites in Washington DC and West Coast locations in LA and San Francisco. You will be troubleshooting, diagnosing, and solving any technical issues that arise during live broadcasts and production control rooms, studios, distribution/automation, master control, and related equipment for all Versant Properties. This role is pivotal to Versant Media’s commitment to deliver high-quality news, sports, and entertainment 24/7. You will be maintaining the integrity of cutting-edge broadcasting technology and collaborating with Engineering and Operations to optimize broadcast workflows in a fast-paced environment. Qualifications The ideal candidate will have knowledge and experience in the following areas: • Strong understanding of digital & signal workflows., • Up to date with industry trends and emerging technologies., • Ability to work alone as a lead and as part of a team., • 2+ years of recent experience supporting live, television production environments. PREFERRED QUALIFICATIONS: • Knowledge of SMPTE 2110 standards., • Knowledge and experience with VizRT, Ross, and Chyron., • Experience with Transmission, Fiber, and Encode/Decode Distribution and Transport Systems., • Experience with Cloud and VM Based applications and planforms., • Ability to read and interpret AutoCAD drawings., • Proficiency with AUTOCAD, MS Office Suite, Windows, Linux, Mac OS., • Experience with JIRA, Confluence and other project and ticketing systems., • Technical enthusiasm and an eagerness to never top learning. Additional Information As part of our selection process, external candidates may be required to attend an in-person interview with a VERSANT Media employee at one of our locations prior to a hiring decision. VERSANT Media's policy is to provide equal employment opportunities to all applicants and employees without regard to race, color, religion, creed, gender, gender identity or expression, age, national origin or ancestry, citizenship, disability, sexual orientation, marital status, pregnancy, veteran status, membership in the uniformed services, genetic information, or any other basis protected by applicable law. If you are a qualified individual with a disability or a disabled veteran and require support throughout the application and/or recruitment process as a result of your disability, you have the right to request a reasonable accommodation. You can submit your request to . VERSANT Media is committed to fair and equitable compensation practices. We include a good faith pay range for each position to comply with applicable state and local pay transparency laws and to promote equity across our organization. Actual compensation will be based on factors such as the candidate's skills, qualifications, experience, and location and may include additional forms of compensation and benefits such as health insurance, retirement plans, paid time off, etc. VERSANT Media is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee at VERSANT via-email, the Internet, or in any form and/or method without a valid written Statement of Work in place for this position from VERSANT's Talent Acquisition team will be deemed the sole property of VERSANT. No fee will be paid in the event the candidate is hired by VERSANT as a result of the referral or through other means.

Job DescriptionThe Chief Engineer is responsible for the overall supervision of the engineering department within the facility assigned. These duties include but are not limited to the installation, repair and maintenance of the facility equipment. The oversight and upkeep of the physical plant, including grounds, utility services, HVAC, plumbing, electrical system, electronic equipment, yard and pavement upkeep in the best manner possible for the safety and health of all concerned, and to coordinate these activities as needed. Responsible for the implementation and documentation of site safety plans and all Engineering Services operational standards and guidelines as well as site specific standards, policies and procedures relating to the engineering department. The Chief Engineer will also assist the facility manager with operational and constant projects for the site. REPRESENTATIVE FUNCTIONS OR DUTIES • Provides supervision and is responsible for the implementation of all preventive maintenance and repair operations at the facility. Schedules emergency repair activities according to priority and the abilities of assigned personnel. Provides technical advice, encouragement and instruction to subordinates in such areas as electric theory, mechanical systems, hydraulic systems, and safety procedures. Perform equipment inspections, noting equipment condition, ensuring that proper maintenance is being performed in accordance with AES standards. Responsible for the implementation of the quality assurance program for all work performed by the department., • Direct or participate in various facility programs and committees relating to assigned responsibilities such as safety, disaster, fire, pollution control and civil defense., • Formulates, recommends and implements site specific policies and procedures to improve the facility physical plant and operations., • Develops a plan and/or procedure for controlling, labeling, recording estimated life expectancy, maintenance and inspecting all capital and non-capital equipment within the facility. This plan includes a long-term engineering capital plan., • Recommends equipment purchases to replace obsolete equipment items and provide assistance in formulating long-range equipment replacement requirements and coordinates actions with contractors., • Assists in the development and implementation of operating and extraordinary expense budgets as required., • Plans and schedules services of department. Establishes standards and work methods; takes steps to assure quality and quantity of performance and evaluates results. Establishes plans for improving departmental work emphasizing efficiency and economy., • Communicates policies and procedures, discusses job problems, and employee concerns with supervisors and employees. Encourages development of habits and attitudes for improved performance and good employee attitudes. Direct, train, evaluate, and counsel all engineering personnel., • Ensures that general safety, fire prevention regulations are enforced, and safe working habits are promoted throughout the facility. Ensures that all shop equipment is properly maintained and conforms to safety standards. Promotes good housekeeping principles and supervises housekeeping details., • Responsible for ensuring that the building systems are operated in the most efficient and effective manner especially as it relates to utility consumption and environmental responsibility. Implement a systematic program to promote energy awareness and conservation within the facility. Champion energy conservation programs to achieve maximum results from tenants and staff., • Maintains an on-going self-improvement program to keep abreast of new equipment, standards, codes, and maintenance procedures.Responsible for the implementation and promotion of the following, • Supports and follows ABM Engineering Services’ operational policies and standards., • Supports and follows ANM Engineering Services’ safety program., • Perform related duties as required – a “can do, will do” attitude., • Reports to and collaborates with management of the facility related issues., • Works with management on plant related and tenant related issues., • Sets and maintains a professional work environment with staff., • Assures good communication., • Ensure standards of service and commitment., • Ensure compliance with safe practices and standards., • Develops goals for department, staff and self., • Builds morale and a team approach., • Complies with employment laws and ABM Engineering Services employment practices., • Supports growth opportunities and potential.SKILLS / EDUCATION / EXPERIENCE, • Experience that is commensurate with the specific facility for the position of Chief Engineer. Prefer 5+ years progressive operations experience., • Strong employee relation skills, coaching skills and training skills., • As required, highest-level relevant state/local license for Stationary Engineer and/or HVAC, plus universal level refrigerant recovery license., • BOMA accredited courses desirable., • Preferred: High-rise Fire Safety Director, Haz-Mat Certification, Indoor Air Quality Certification, LEED Certification., • Strong oral and written communication skills., • Ability to work with MS Word, Excel, and Outlook., • Computer skills and building automation systems experience required., • Certification meeting OSHA ACM awareness training requirements as required.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. The Senior Controls / Automation Engineer role requires an individual have a diverse engineering skill set with the ability to work independently to perform all aspects of process automation engineering and system integration, including initial concepts, specifications, design engineering, documentation, project implementation, testing, startup, and training of operating and maintenance personnel. You will be a key member of a diverse team of professionals developing solutions for our client's most complex automation challenges. Location: Regional Southern CT / Tarrytown area travel to sites You will: • Lead or work on a project team responsible for the design, configuration, and testing of continuous and batch control applications., • Understand the project scope and financials and exercise good time management skills to plan & coordinate the work as part of a project team by developing project schedules and budgets in collaboration with project leadership and identify change orders and justify changes to Project Management ensuring completion of all project deliverables to the satisfaction of the client., • Anticipate and provide solutions to project leadership and/or customer giving high priority to customer satisfaction offering strong technical expertise and advisement as part of the project team., • Adapt to a flexible work schedule & travel, if necessary, to participate in the design, development, and start-up of control systems at the client's facility., • Act as an automation Subject Matter Expert, • Hands on experience executing automation projects for process plants, minimum of 3-5 years in industry, preferably in Life Sciences domain., • BS Engineering degree or equivalent educational background, • Detail oriented with strong technical aptitude and desire for learning new technologies, • Knowledge of industry and regulatory standards, design criteria and codes relevant to Instrumentation and Controls, • ISA S88 Batch standard, • ISA S95 Controls System Architecture standard, • GAMP 5 & cGMP, • 21 CFR Part 11, • Demonstrated ability to develop process control system applications, utilizing Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems, configuration of thin client server applications, design, developing & maintaining databases for data collection, configuring process historians and using reporting tools to present process data to operations & management, tuning control loops, providing control system startup services, troubleshooting existing control systems and providing control system qualifications., • Solid understanding of object-oriented software development & delivery methodologies, • Expertise with the design, implementation, maintenance and troubleshooting of virtual server-based control system architectures, and understanding of control system network topology, i.e. Ethernet, Ethernet/IP, ControlNet, DeviceNet, etc., • Knowledge of process instrumentation specification, installation & troubleshooting, and control panel design, check-out, commissioning & troubleshooting, • Hands-on experience rapidly troubleshooting and solving equipment & instrument-related issues during start-up and commissioning and perform complex system testing, • Experience working at customer sites supporting the installation & commissioning of equipment and systems., • PLC Programming with Rockwell Studio5000, RSLogix5000, • Ability to program in RLL, SFC and ST, • Plant Pax module definition is required, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off.

Job Description Senior Mechanical Engineer Electromechanical Systems and Industrial Machinery Employment Type: Full-Time Industry Focus: Electromechanical Equipment I Automation Systems I Industrial Manufacturing I Robotics I Custom Machinery I Food and Beverage I Packaging I Water and Wastewater I Processing Equipment A privately owned, highly respected manufacturer with over 50+ years of success delivering complex, high-quality custom and benchmark electromechanical systems for critical infrastructure. Seeking to add to our engineering team a seasoned professional to help us build custom machinery used across the food and beverage, water treatment, packaging, energy, and automation sectors. Every system is designed, fabricated, and assembled on-site in their U.S.-based facilities. A financially stable, customer-trusted, and operates with speed, precision, and integrity. With low turnover, strong leadership, and a tight-knit, collaborative team, this is a rare opportunity for a senior-level engineer looking to make a real impact. Why Work Here • A privately-owned, financially secure, stable organization with a bold growth plan, your contributions matter here, • Recession-resistant with a strong, diverse client base, • All manufacturing and engineering done on-site in the U.S., • Short lead times and fully integrated workflow, • Diverse vertical markets including food processing, automated packaging, and industrial systems, • Long-tenured team with low turnover and deep technical experience, • Real mentorship from senior engineers and technical leadership, • A collaborative, team-first culture that values craftsmanship, integrity, and innovation, • Competitive salary + performance-based bonuses, • Clear pathways for career advancement into operations, technical leadership, or project management, • Access to ongoing technical training and development resources, • Opportunities to work on meaningful projects that impact essential industries, • Flexibility, autonomy, and a culture where good ideas get traction What You Will Do • Lead the design and development of mechanical and electromechanical systems, • Engineer custom industrial machinery, motion systems, and integration for real-world automation, • Create detailed 3D CAD models and drawings using Autodesk Inventor, SolidWorks, and AutoCAD, • Play a key role in the transition to Autodesk Inventor as the core design platform, • Collaborate with sales, drafting, production, service, and R&D teams to ensure design feasibility and performance, • Attend Factory Acceptance Tests, system demos, and customer meetings, • Conduct hands-on testing and root cause analysis to solve engineering challenges, • Recommend improvements to enhance reliability, manufacturability, and cost-efficiency, • Generate full technical documentation including BOMs, manuals, and assembly instructions, • Provide limited on-site support for commissioning and validation, travel is minimal (0 to 2 percent) What You Bring to the Role • Experience designing electromechanical equipment, custom machinery, and automated systems, • High-level proficiency in Autodesk Inventor preferred, along with SolidWorks and AutoCAD, • Solid understanding of GD&T, tolerance analysis, mechanical fasteners, motion control, and pneumatics, • Familiarity with PLM systems and NPI workflows, • Hands-on background and mechanical aptitude is strongly valued. Candidates who enjoy working on cars, engines, machines, or DIY projects often excel here, • Strong communication and collaboration skills with the ability to present technical information clearly to both internal teams and clients, • Associate or bachelor’s degree in Mechanical Engineering or a related discipline, or equivalent hands-on experience, • Proficiency in Microsoft Office and collaboration tools like SharePoint and Microsoft Teams Nice to Have ~But Not Required While not required, familiarity with the following codes and standards is considered a plus: • ASME Section VIII for pressure vessel design and inspection, • ASME B31.1 and B31.3 for power and process piping, • ASME Y14.5 for geometric dimensioning and tolerancing, • ASME B16.5, B36.10M for flanges, pipes, and fittings, • ASME PTC 4 and PTC 46 for boiler and plant performance testing Traits That Help Engineers Thrive Here • Curiosity and a hands-on mindset, • Creative approach to solving practical engineering problems, • Ability to see the big picture while staying detail-oriented, • Integrity, loyalty, and a team-first attitude, • Enjoys challenging workflow, with fresh projects, • Adaptability in a fast-paced manufacturing environment Let’s Build What’s Next – Together If you’re driven by precision, purpose, and the challenge of making great ideas real, we’d love to hear from you. Looking forward getting to know you… We are as well as our client are an equal opportunity employer and welcome all qualified applicants regardless of race, gender, age, disability, veteran status, or other protected classification.

Job Description BASIC FUNCTIONS Quality Engineer will provide support to the Sr. Director of Quality Compliance in maintaining a strong overall Quality Compliance Program including the Quality Management System. The core focus shall be technical reviews implemented and established for each Department. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Ensures customers’ technical requirements are met by reviewing process procedures, test procedures, and supplier / Internal quality manuals to understand the scope and testing requirements, • Ensures products meet the organizations and customers quality and product integrity requirements., • Supports process development or operations team by providing analysis and expertise throughout the inspection & testing process., • Counsel and advise Sales personnel on technical developments or nonconformances (drawings, capabilities, etc.), • Advise Sales and Operations leadership on capability/capacity for certain types of orders, products, etc., • Enforce CTG Quality Planning including product sampling., • Support RFP/RFQ/Contract reviews – quality and technical review, • Conduct routine Material Review Board & Counterfeit Review Board actions and provide resolution/disposition, • Responsible for reviewing and submitting CTG requests for designated Airworthiness Rep 8130’s, • Maintain and retain a working list of qualified ASA-100/FAA AC 00-56 trained Inspectors/Technicians., • Oversight of the DQR (Designated Quality Representative) program for Sikorski, Lockheed, GDLS, and UTC. Utilizing First Article / First Piece development per AS9102, • Conduct sampling reviews of contract to shipped product(s), such audits shall be documented, • Ensuring equipment Preventative Maintenance and Calibration requirements are established and followed., • Develop and implement HAZMAT protocols including handling and disposition, • Identifies root causes of problems in the inspection process; recommends and/or implements corrective measures., • Champions Lean-Six Sigma methodologies within the organization; responsible for organizations’ 5S program and identifies and leads projects focused on reducing waste and increasing quality, • Ensure Return Material Authorization process is reviewed and documented, authorize approval as required per process., • Identify requirements for product(s) reviewed at CTG for potential Reach/RoHS specifics, • Manage and Enforce ESD S20.20 requirements within critical zones., • Review all Return to Vendor items for adequacy prior to material leaving facility, process all requirements within EPDS., • Disposition all discrepant material, determine (based on RMA/RTV) scrap rates, rework rates and return to stock., • Serve as backup to Senior Director of Quality Compliance for conditional quality plan approvals and conditional supply-chain activation approvals., • Collect and Analyze quality information for the development of quality strategies and continuous improvement plans, • Performs other duties as assigned. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Audit Findings (Reference QMR outputs), • FAI completion rates (M/Y, Quantity and per customer) Avg. process time/capacity, • Conditional Quality plannings (M/Y – Type, product specific, processing time), • RMA & RTV Data, Including DM Rates (Scrap, Rework, etc.) EDUCATION / EXPERIENCE / COMPENTENCY Bachelor’s degree in industrial engineering or related discipline required. • Certified Quality Engineer or equivalent, • ESD Program Manager preferred, • Approximately 0-4 years of experience, • Excellent interpersonal skills with ability to serve as a liaison with developers, project managers, and customer support., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software, • Excellent organizational skills and attention to detail Preferred • Lean Six-Sigma Training/Certification, • Operational experience within QMS in Aerospace, Medical or other highly regulated industry

Job DescriptionUnder the supervision of Chief Engineer and/or Assistant Chief Engineer, the Engineer is responsible for maintenance and repairs to the buildings and grounds, related fixed and portable equipment and installation, while establishing a safe environment for the facility. Supports the implementation and documentation of site safety plans and all ABM Engineering Services operational standards and guidelines as well as site specific standards, policies and procedures relating to the engineering department.REPRESENTATIVE FUNCTIONS OR DUTIES: • Maintains and performs repairs to buildings, utilities, grounds and equipment., • Optimize the repair and maintenance of HVAC, electrical and plumbing equipment and systems. Uses and helps provide best practices to troubleshoot and repair equipment and system problems so that problems are resolved in the most efficient and effective manner., • Maintains continuous operations of equipment by troubleshooting and repairing., • Provide hands-on training and collaboration to other engineering team members., • Fosters a work environment that promotes energy conservation and continuous improvement of engineering functions., • Records all pertinent data in building logbooks and makes all appropriate daily entries., • Conducts utility and equipment tests., • Records pertinent data on all equipment in accordance with federal, state, and local codes and requirements., • Process administrative paperwork in accordance with departmental policies and procedures., • Stay abreast of the latest technology as related to building systems and equipment and emergency response regarding fire and life safety., • Actively functions as a team member., • Demonstrates commitment to quality of service., • Complies with ABM Engineering Services and facilities’ policies and procedures., • Complies and participates with ABM Engineering Services safety program., • Complies and participates in facility specific safety program.  Maintains regular attendance in the workplace., • Provides highest quality of service to the tenants, staff and visitors at the facility., • Participate in regular required communication with Chief Engineer, Assistant Chief Engineer, management, tenants and other staff. SKILLS / EDUCATION / EXPERIENCE:, • Experience that is commensurate with the specific facility for the position of Engineer., • Ability to read and interpret blueprints., • As required, highest-level relevant state/local license for Stationary Engineer and/or HVAC, plus universal level refrigerant recovery license., • Computer skills and building automation systems experience required., • Certification meeting OSHA ACM awareness training requirements as required.

Job Description Position Summary The Medical Field Equipment Technician provides front-line support to clients by performing installation, troubleshooting, maintenance, and repair of medical and dental equipment both remotely and on-site. This role ensures high levels of customer satisfaction by delivering technical solutions aligned with the company’s service standards. The technician is expected to work independently in the field, support equipment training, and contribute to continuous improvement efforts. Key Responsibilities • Serve as the first point of contact for client equipment-related inquiries and service requests, • Install, configure, inspect, and test medical and dental field equipment at client sites, • Diagnose and resolve technical issues via phone, email, and field visits, • Maintain accurate documentation of service cases, including resolutions and follow-up actions, • Escalate unresolved or critical issues to internal teams with clear documentation, • Provide basic training to clients on equipment operation and maintenance, • Monitor and track service metrics such as resolution time, customer satisfaction, and call quality, • Travel weekly to client job sites (average duration: 2–7 days per assignment), • Handle and transport equipment (up to 50 lbs), ensuring safe handling and setup, • Operate tools and testing devices to verify functionality of repaired units, • Support internal training initiatives and participate in service process improvements, • High School Diploma or GED required; Associate degree in electronics, biomedical equipment, or related field preferred, • Valid driver’s license and ability to travel regularly, • Strong mechanical aptitude and hands-on repair experience, • Familiarity with patient care environments and clinical equipment usage, • Excellent communication and interpersonal skills, • Proficiency in Microsoft Office (Word, Excel, Outlook), • Ability to work independently, manage multiple tasks, and adapt to changing priorities, • Must be able to kneel, bend, and stand for extended periods and operate in tight spaces, • Ability to lift up to 50 pounds and push/pull service carts

Job Description Please note; this role is based in Mount Vernon! Job Summary Miller Proctor Nickolas (MPN) is a premier leader in the industrial boiler market. We are seeking a high-caliber Technical Sales Engineer to drive our Aftermarket Parts and Service division. This is not a "catalog sales" role; it is a complex, solutions-based position requiring a BS in Engineering and the ability to design sophisticated service solutions that go beyond the client’s initial request. You will act as the technical bridge between our field technicians and our clients, turning on-site challenges into comprehensive service upgrades and repair contracts. If you are a self-starter who thrives on technical problem-solving, value-based selling, and managing high-stakes industrial accounts, you belong at MPN. Key Responsibilities • Technical Solution Design: Evaluate field service opportunities and design complex mechanical/electrical service solutions. You must be able to read mechanical drawings and wiring diagrams to quote accurate repairs and upgrades., • Rapid Response Quoting: Support our field technicians and boiler cleaning teams by providing rapid, manufacturer-authorized quotes while they are on-site., • Value-Based Selling: Navigate long-term sales cycles by focusing on the "Total Cost of Ownership," ensuring clients understand the value of a premium MPN solution., • Account & Contract Management: Prospect new clients and manage existing accounts, including the negotiation of complex service contracts and maintenance agreements., • Full-Cycle Ownership: From receiving the lead to placing the PO with suppliers and coordinating with the Service Scheduling team, you own the project’s administrative and financial integrity., • Project Handoff: Identify and forward new boiler sales opportunities to the capital equipment team while coordinating larger projects with internal Project Management. Qualifications • Education: BS Degree in Engineering or Engineering Technology is required., • Experience: Minimum of 2 years in industrial technical sales. Prior experience with boiler systems or aftermarket industrial products is highly preferred., • Technical Literacy: Proven ability to interpret mechanical drawings, electrical wiring, and technical specifications., • Systems Proficiency: Strong experience with CRM platforms (HubSpot preferred) and MS Office (Excel/Word)., • Financial Acumen: Experience in industrial estimating, billing, and protecting profit margins, • Soft Skills: Customer-centric problem solver, excellent time-management, and the ability to work independently with no handholding. Why Join Miller Proctor Nickolas? • Reputation: Represent a manufacture’s authorized leader in the boiler industry., • Autonomy: Manage your own territory and accounts with the backing of a world-class field service team., • Compensation: Competitive base salary plus a commission structure designed for high-achievers., • Stability: Work in a critical industrial sector with a company known for excellence since 1957.Company DescriptionMiller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.

Job Description Product Sales Engineer Engineered Equipment | Capital Machinery | Processing & Water Treatment Industries Drive Innovation. Empower Solutions. Engineer Growth. We are seeking a Product Sales Engineer to join our high-performance team supporting the sales and application of custom and benchmark electro-mechanical equipment across industries such as food & beverage, packaging, and water/wastewater treatment. This role bridges the gap between engineering and sales—combining technical expertise, client engagement, and commercial strategy to support field sales teams, drive customer satisfaction, and grow market share. Who You Are: You’re a technically savvy professional with a background in equipment manufacturing, Packaging, Food & Bev, process systems, or water treatment solutions—ready to leverage your knowledge into consultative sales support. You enjoy collaborating across departments, mentoring others, and solving problems creatively. Preferred Backgrounds: • Electro-mechanical systems, • Capital equipment (packaging, processing, filtration, or automation), • Water/Wastewater systems, • Process equipment for industrial or municipal markets Degree preferred: Mechanical, Electrical, Chemical, or Systems Engineering (Associate or Bachelor’s level), or equivalent technical experience. Key Responsibilities Technical Sales Support • Partner with Field Sales Representatives to analyze customer requirements, recommend solutions, and configure systems that align with performance and budget goals., • Serve as the subject matter expert for specialized equipment and develop competitive product positioning., • Assist in proposal development, quote generation, and pricing strategy for complex systems., • Mentor and train Field Sales Representatives in product capabilities, sales strategies, and competitive differentiators., • Analyze industry trends and competitive data to help identify market opportunities and enhance sales strategy., • Maintain accurate, professional documentation of sales activities, client communications, and engineering support., • Provide feedback to product development and marketing teams to drive continuous improvement. Qualifications • 3–5+ years of experience in technical sales, application engineering, or product management within a capital equipment or electro-mechanical manufacturing environment., • Strong understanding of custom machinery or engineered system design., • Familiarity with CAD platforms, CRM systems (e.g., Salesforce or HubSpot), and project tracking tools., • Demonstrated success supporting or leading complex sales engagements., • Excellent communication, problem-solving, and customer relationship-building skills., • Willingness to travel (up to 5%) and perform light hands-on tasks as needed for product demos or events. What We Offer • A collaborative culture where engineering and innovation are celebrated., • Competitive base compensation + performance bonuses., • Ongoing training and development programs to support your professional growth., • Mentorship opportunities and a path to advance into senior technical, sales, or operational leadership roles., • A team-first environment where your ideas and expertise are valued. Be Part of Something Bigger If you thrive in a solution-driven environment and are ready to contribute your technical talent to a company that builds world-class systems for critical industries—this is the opportunity for you. We are an equal opportunity employer and welcome applicants from all backgrounds and experiences.

Job DescriptionDescription: Job Title: Quality Control Engineer / Quality Specialist Location: Spartanburg, SC or Mount Vernon, NY Company: ICE AIR, LLC and Affiliates (“Ice Air”, the “Company”, “We”) About Us: Ice Air is a manufacturer of innovative HVAC solutions serving the North America market. We are dedicated to providing reliable, quality, energy-efficient equipment for all new construction, replacement and retrofit projects. Position Overview: We are seeking a motivated Quality Control Engineer / Specialist to support the reliability, performance, and continuous improvement of our HVAC products and manufacturing processes. This role will focus on identifying quality issues, performing structured root cause analysis, improving internal processes, and strengthening feedback loops between manufacturing, engineering, service, and customers. The ideal candidate will have experience working in a manufacturing or service-oriented environment and will be comfortable analyzing technical problems, communicating with cross-functional teams, and driving corrective actions that prevent recurring issues. This individual will play an important role in helping build more robust systems and improving the overall customer experience. Key Responsibilities: • Lead Root Cause Corrective Action (RCCA) investigations into internal quality issues, field failures, and customer complaints., • Utilize structured problem-solving tools such as 8D, 5-Why analysis, Fishbone diagrams, Pareto analysis, and FMEA to identify root causes and implement corrective actions., • Analyze service trends, warranty data, and field performance information to identify recurring issues and improvement opportunities., • Work closely with engineering, manufacturing, and service teams to strengthen system reliability and help “bullet-proof” HVAC equipment performance in the field., • Develop and maintain quality control processes, inspection standards, and documentation to ensure consistent production quality., • Partner with manufacturing teams to identify process weaknesses and implement improvements that reduce defects and variability., • Monitor quality performance indicators including defect rates, warranty trends, service call data, and customer feedback., • Support containment activities and corrective action implementation when quality issues arise., • Communicate clearly with both technical teams and leadership, ensuring issues and solutions are understood across the organization., • Assist with customer communication when necessary to explain findings, corrective actions, and improvement plans., • Support new product introductions by validating quality processes and production readiness., • Competitive salary, bonus, and benefits package., • Significant long-term growth opportunity., • Bachelor’s degree in engineering, Industrial Engineering, Mechanical Engineering, Quality Engineering, or related technical field preferred., • 2–4 years of experience in quality engineering, manufacturing, service engineering, or related technical roles., • Hands-on experience performing root cause analysis and implementing corrective actions., • Strong analytical and data interpretation skills with the ability to identify trends and improvement opportunities., • Ability to work effectively across multiple departments including operations, engineering, service, and leadership teams., • Strong written and verbal communication skills., • Proficiency with standard business tools including Excel, Word, and PowerPoint. Preferred Qualifications • Experience with HVAC systems, refrigeration systems, or electro-mechanical assemblies strongly preferred., • Experience working with service teams or customer feedback loops is a plus., • Experience with HVAC equipment such as PTAC units, packaged systems, or commercial HVAC products., • Familiarity with manufacturing quality systems, continuous improvement methodologies, or Lean/Six Sigma environments., • Experience performing failure analysis or reliability investigations., • Ability to help build structured processes that prevent issues rather than simply reacting to them. Personal Attributes • Strong problem-solver with a curiosity for understanding technical failures., • Comfortable working in a fast-paced manufacturing environment., • Ability to communicate effectively across all levels of the organization., • Collaborative mindset with the ability to influence teams and drive improvements., • Focused on building durable systems, strong processes, and long-term quality improvements.

Job DescriptionCompany Description Sr. AV Project Manager Location: Ridgefield Park, NJ Job Type: Full-time (1-Year Contract) Work Type: On-site Salary: $7,380 / month Job Overview We are seeking an experienced Senior AV Project Manager to lead enterprise-level Audio/Visual (AV) system design, consulting, and project execution. This role requires a technically strong professional who can bridge business needs with AV technology solutions, manage projects from planning to completion, and provide hands-on support during system deployment. The ideal candidate will have experience designing enterprise video conferencing systems, managing AV integrations, and working directly with clients and cross-functional technical teams. Job Description Key Responsibilities Client & Business Engagement * Act as the primary AV subject matter expert (SME) for clients and internal teams * Conduct needs assessments and recommend scalable AV solutions * Present AV technologies including video conferencing and collaboration platforms * Translate business requirements into technical system designs * Maintain strong relationships with customers, vendors, and integration partners AV System Design & Engineering Design and engineer enterprise AV systems including: * Video conferencing rooms (Huddle, Conference, Boardroom, Training Rooms) * Collaboration spaces and multi-purpose environments * Digital signage and integrated AV systems Experience with: * Cisco video conferencing solutions (Room Series, Codec platforms) * Poly collaboration systems * Cisco Webex * Microsoft Teams * Zoom Additional responsibilities include: * Signal flow design * Network integration * DSP configuration concepts * Control systems integration Project Management & Leadership * Lead AV projects from concept through completion * Manage internal technicians and external integration partners * Develop project timelines, milestones, and resource plans * Coordinate with IT, networking, facilities, and construction teams * Ensure projects are delivered on time and within scope and budget * Identify and mitigate technical and operational risks BoM & Commercial Review * Develop detailed Bills of Materials (BoM) for AV systems * Validate vendor quotations and equipment compatibility * Ensure alignment with project scope and budget * Support procurement and cost optimization strategies Documentation & Reporting * Define project scope clearly for clients and integration teams * Produce technical documentation and system diagrams * Prepare completion reports including: * As-built documentation * Equipment lists * Test results * Client sign-off documentation Installation Oversight & Technical Support * Oversee AV installation and commissioning * Support system testing and user acceptance * Troubleshoot video conferencing and AV integration issues * Provide end-user training and executive-level support Qualifications Qualifications Education * Bachelor’s degree in Network, Telecommunications, Audio/Visual, or related field Experience * 7+ years of AV system design, integration, or project management experience preferred * Experience managing enterprise AV deployments * Strong understanding of IP-based AV and networking fundamentals * Experience working with unified communication platforms Skills * Strong communication skills with executives and technical teams * Ability to lead cross-functional teams * Strong documentation and reporting capabilities * Detail-oriented with strong decision-making ability * Ability to work in fast-paced environments Additional Requirements * Travel up to 50% * Proficiency in Microsoft Office (Word, Excel, PowerPoint) Preferred Qualifications * Korean / English bilingual * Experience with enterprise AV environments Preferred Certifications * AVIXA CTS / CTS-D / CTS-I * PMP Certification Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionCompany Description Sr. AV Project Manager Location: Ridgefield Park, NJ Job Type: Full-time (1-Year Contract) Work Type: On-site Salary: $7,380 / month Job Overview We are seeking an experienced Senior AV Project Manager to lead enterprise-level Audio/Visual (AV) system design, consulting, and project execution. This role requires a technically strong professional who can bridge business needs with AV technology solutions, manage projects from planning to completion, and provide hands-on support during system deployment. The ideal candidate will have experience designing enterprise video conferencing systems, managing AV integrations, and working directly with clients and cross-functional technical teams. Job Description Key Responsibilities Client & Business Engagement * Act as the primary AV subject matter expert (SME) for clients and internal teams * Conduct needs assessments and recommend scalable AV solutions * Present AV technologies including video conferencing and collaboration platforms * Translate business requirements into technical system designs * Maintain strong relationships with customers, vendors, and integration partners AV System Design & Engineering Design and engineer enterprise AV systems including: * Video conferencing rooms (Huddle, Conference, Boardroom, Training Rooms) * Collaboration spaces and multi-purpose environments * Digital signage and integrated AV systems Experience with: * Cisco video conferencing solutions (Room Series, Codec platforms) * Poly collaboration systems * Cisco Webex * Microsoft Teams * Zoom Additional responsibilities include: * Signal flow design * Network integration * DSP configuration concepts * Control systems integration Project Management & Leadership * Lead AV projects from concept through completion * Manage internal technicians and external integration partners * Develop project timelines, milestones, and resource plans * Coordinate with IT, networking, facilities, and construction teams * Ensure projects are delivered on time and within scope and budget * Identify and mitigate technical and operational risks BoM & Commercial Review * Develop detailed Bills of Materials (BoM) for AV systems * Validate vendor quotations and equipment compatibility * Ensure alignment with project scope and budget * Support procurement and cost optimization strategies Documentation & Reporting * Define project scope clearly for clients and integration teams * Produce technical documentation and system diagrams * Prepare completion reports including: * As-built documentation * Equipment lists * Test results * Client sign-off documentation Installation Oversight & Technical Support * Oversee AV installation and commissioning * Support system testing and user acceptance * Troubleshoot video conferencing and AV integration issues * Provide end-user training and executive-level support Qualifications Education * Bachelor’s degree in Network, Telecommunications, Audio/Visual, or related field Experience * 7+ years of AV system design, integration, or project management experience preferred * Experience managing enterprise AV deployments * Strong understanding of IP-based AV and networking fundamentals * Experience working with unified communication platforms Skills * Strong communication skills with executives and technical teams * Ability to lead cross-functional teams * Strong documentation and reporting capabilities * Detail-oriented with strong decision-making ability * Ability to work in fast-paced environments Additional Requirements * Travel up to 50% * Proficiency in Microsoft Office (Word, Excel, PowerPoint) Preferred Qualifications * Korean / English bilingual * Experience with enterprise AV environments Preferred Certifications * AVIXA CTS / CTS-D / CTS-I * PMP Certification Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Construction Project Managers (PM's) control the time, cost and quality of construction projects, from coordinating the layout, framing, drywall, and finishing. PM's plan and coordinate all aspects of the construction process. PM's determine the scheduling of different phases of a project based and established deadlines. PM's negotiate changes in scope with GC/CM's, architects, vendors, contractors and other workers. PM's order and coordinate delivery of materials and equipment to construction sites. As a project continues, PM's typically confer with supervisors or other managers to monitor construction progress, including project total anticipated costs within the cost report, worker productivity and compliance with building and safety codes. Principle Project Management Duties Develops a cost-effective plan and schedule for completion of project following a logical pattern for utilization of resources. Minimizes exposure and risk by implementing and audits safety standards and quality assurance controls. Coordinates work of subcontractors working on various phases of multiple projects. Oversees performance of all trade contractors and reviews architectural and engineering drawings to make sure that all specifications and regulations are being followed. Responsible for proper administration of construction contracts and for obtaining all necessary permits and licenses. Supervises Assistant Project Managers and Superintendents, reviews their reports, checks on any reported difficulties, and corrects any safety violations or other reported deficiencies. Tracks and controls construction schedule and associated costs to achieve completion of projects within time and monies allocated. Reports to CM/GC's, owner, architects about progress and any necessary modifications of plans that are indicated. Plans, implements, tracks and closeout / turnover of construction projects. Conducts project meetings. Manages day to day operational and tactical aspects of multiple construction projects in a supervisory role Manages day to day client interactions and expectations, directly or in a supervisory role. Accurately forecasts revenue, profitability and project costs Manages to and achieves revenue goals set for projects Generates and issues regular internal and external project reporting through company software. Proactively identifies changes in project scope and ensures appropriate measures are taken to price and implement project changes in scope and secure necessary revenue. Knowledge, Skills and Abilities: • Project Management experience with drywall, • Strong written and oral communication skills, • Strong interpersonal skills, • Strong negotiating skills, • Strong computer skills, emphasis on Microsoft Office, Microsoft Project, Viewpoint, OST/QB, Pipedrive, • Dispute resolution, financial and Job cost accounting knowledge, • Ability to work under pressure and coordinate numerous activities and groups of people who need to cooperate to achieve maximum efficiency Job Type: Full-time Pay: From $100,000.00 per year Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance

Job DescriptionCompany Description VERSANT is a leading force in news, sports and entertainment - home to iconic and trusted brands that inspire, inform, and delight audiences. Our unique combination of content, technology and services enriches the cultural fabric, igniting passions, sparking conversations, and connecting people to what they love most. As an independent, publicly traded company, VERSANT brings together powerhouse cable networks - including USA Network, CNBC, MS NOW (formerly MSNBC), Oxygen, E!, SYFY, and Golf Channel - with dynamic digital and direct-to-consumer brands such as Fandango, Rotten Tomatoes, GolfNow, GolfPass, and SportsEngine. Together, these businesses reflect our commitment to delivering exceptional experiences across every screen and service. VERSANT is an industry-changing media company fueled by innovation and an entrepreneurial spirit. With a strong foundation and a forward-looking vision, VERSANT empowers creativity, embraces change, and drives connection in an ever-evolving world. Job Description We are looking for a Senior Full-Stack Software Engineer to join our growing engineering team. You will play a key role in designing and building scalable, secure, and user-centric applications that power Versant’s next-generation platforms. This role is ideal for someone who thrives in startup-like environments, embraces SaaS and low-code/no-code platforms, and is passionate about delivering value quickly. Key Responsibilities • Collaborate with cross-functional teams from ideation to launch, delivering full-stack solutions that solve real business problems., • Design and build scalable, fault-tolerant microservices and modern front-end applications., • Leverage SaaS, low-code/no-code platforms where appropriate to accelerate delivery., • Participate in code reviews, pair programming, and knowledge-sharing sessions to elevate team quality., • Mentor junior engineers and contribute to a culture of continuous learning and improvement., • Ensure security, performance, and maintainability are core to all solutions., • Work closely with product and architecture teams to align on the technical direction and business priorities.Qualifications, • 6+ years of professional software development experience., • Proficient in modern JavaScript/TypeScript, HTML/CSS, and frameworks like React, Vue, or Angular., • Experience with backend development in languages such as Java, Node.js, Python, or Go., • Strong understanding of microservices architecture and RESTful APIs., • Familiarity with cloud platforms (AWS, Azure). Experience with Git and CI/CD pipelines., • Experience with GenAI tools, SaaS platforms, and low-code/no-code tools., • Exposure to serverless technologies and event-driven architecture., • Experience modernizing legacy systems or integrating with enterprise platforms., • Familiarity with DevOps practices and infrastructure-as-code. his position is eligible for company sponsored benefits, including medical, dental and vision insurance, 401(k), paid leave, tuition reimbursement, and a variety of other discounts and perks. Salary range: $110,000 - $160,000 What we’ll offer: At CNBC Headquarters in Englewood Cliffs, NJ, you’ll have access to great perks and amenities: • Sweat it out -- Free onsite fitness center with state-of-the-art equipment, plus daily group classes, • Eat up -- Gourmet cafeteria with daily specials plus soup and salad bars, • Extras -- Dry cleaning, and sneak peeks, • Don’t have a car? No problem! We offer free shuttle transportation to and from multiple locations in Manhattan, Brooklyn, Hoboken and Jersey City Additional Information As part of our selection process, external candidates may be required to attend an in-person interview with a VERSANT employee at one of our locations prior to a hiring decision. VERSANT's policy is to provide equal employment opportunities to all applicants and employees without regard to race, color, religion, creed, gender, gender identity or expression, age, national origin or ancestry, citizenship, disability, sexual orientation, marital status, pregnancy, veteran status, membership in the uniformed services, genetic information, or any other basis protected by applicable law. If you are a qualified individual with a disability or a disabled veteran and require support throughout the application and/or recruitment process as a result of your disability, you have the right to request a reasonable accommodation. You can submit your request to . VERSANT is committed to fair and equitable compensation practices. We include a good faith pay range for each position to comply with applicable state and local pay transparency laws and to promote equity across our organization. Actual compensation will be based on factors such as the candidate's skills, qualifications, experience, and location and may include additional forms of compensation and benefits such as health insurance, retirement plans, paid time off, etc.

Job Title: Salesforce Project Manager.Location: NY/NJ (Hybrid – 3 days/week).Seeking a Senior Project Manager to lead Salesforce B2B delivery projects, managing end-to-end execution, stakeholders, and cross-functional teams.Manage multiple Salesforce projects (scope, timeline, budget).Drive projec

Preferred Skills PMP Certification Primavera P6 Experience Familiar with Construction Work Scopes Familiar with Engineering Concepts Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal

ProLogistix - - Responsibilities: Receiving incoming shipments; Storage and organization; Handling discrepancies and returns; Inspecting and verifying accuracy.

Coordinates efforts of many support groups including in-house crafts, engineers, and subcontractors. Develops project schedules and establishes funding levels based on engineered work scopes. Primary interface with all stakeholders including internal and external customers, project engineering, exec

Cintas Corporation - - Responsibilities: Apply and remove ID tape/bar codes and/or company or name emblems on garments using an industrial heat sealing machine; Place completed garments in the appropriate location to facilitate organization and delivery to customers; Maintain the cleanliness of the

As an associate engineer, you will be responsible for your own cognizant components, systems and area but will be supported by a team including more experienced engineers and advisors. Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related

Aerotek - - Responsibilities: Receive and process incoming shipments both internationally and nationally.Pick and pack parts accurately for dispatch.Operate a forklift for the transportation of goods within the warehouse.Ensure all shipping and receiving activities are conducted efficiently and acc

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field; or Masters degree from an accredited college or university in a related technical, engineering or science field. CM engineers also regularly tea

Brookdale Senior Living - 590 Old Hook Road - Responsibilities: Keeping our communities running in top-notch condition by performing maintenance on HVAC, elevator, fire and sprinkler equipment, generators, landscape, kitchen equipment and emergency pull cord equipment; Perform general maintenance pr

Island Hospitality Management - - Responsibilities: Perform routine and preventative maintenance on resort facilities; Complete minor repairs to rental homes and facilities; Inspect irrigation systems, playgrounds, pool/spa, and recreational amenities; Maintain resort pool(s) and test chemical leve

Focus Workforce Management - - Responsibilities: Picking, packing, warehousing, and shipping product or merchandise to individual consumers or clients; Maintain excellent attendance; Follow all safety procedures; Communicate effectively; Maintain and assist keeping the facility clean.

ImageFIRST - - Responsibilities: Responsible for the installation, maintenance, troubleshooting, and repair of industrial machinery; Perform preventative and predictive maintenance on industrial machinery; Program PLC's; Complete daily maintenance and repair logs; Follow all safety procedures.

Waste Connections - - Responsibilities: Operate heavy equipment such as bulldozers, wheel loaders, motor grader, scraper, and compactors; Perform routine inspection and maintenance on equipment; Promote continuous improvement of workplace safety and environmental practices; Interact with customers

C&W Services - - Responsibilities: Safety: Promote a safe working environment by following all safety procedures; Maintenance: Maintain and troubleshoot all conveyor systems in the building; Install, maintain, and troubleshoot motors, variable frequency drives, bearings, reducers, belts, rollers, p

Complete assigned service requests and repairs consistent with company operating and equipment/supply standards and in a safe and timely manner; Perform turn-key work as required to ensure vacant apartment homes are rent-ready in a timely manner; Maintain customer service standards.

Chromalloy - 330 Blaisdell Road - Responsibilities: Assist in troubleshooting, repairing, and maintaining electronic systems, control panels, and electrical components; Learn to read and interpret blueprints, schematics, wiring diagrams, and technical manuals; Support preventive and corrective maint

Cintas Corporation - - Responsibilities: Repair, maintain, install and troubleshoot industrial equipment; Perform preventive/predictive maintenance; Resolve safety concerns; Perform indoor and outdoor housekeeping; Monitor inventory and maintain maintenance records.

National Church Residences - - Responsibilities: Perform routine inspections, preventive maintenance, and necessary repairs; Diagnose and repair HVAC, plumbing, electrical, and mechanical system issues; Maintain interior and exterior common areas, ensuring safety and cleanliness; Complete minor car

Primary Responsibilities Include the Following:.Manage a portfolio of multiple innovations across Personal Care Categories that will accelerate the growth of the Suave business.Develop project timelines and identify milestones that support the planned in-store date.Oversee the product development jo