Equipment engineer jobs in Oceanside, New YorkCreate job alerts

\n\n We are looking for a Project Engineer for our Westbury, NY facility. In this role you will support the R&D organization by researching, evaluating, selecting and applying standard engineering techniques, procedures and criteria in testing and solving technical problems pertaining to thermal spray application development, system acceptance tests, and product validation projects. \n Your Responsibilities: \n\n • Formulates and executes project plans within the Coating Solution Center (CSC) under limited guidance from Sr. Project Engineers. \n, • Leads individual project activities for thermal spray application and parameter development, product support and validation (system acceptance tests). Additional support required for key account managers, materials and equipment business lines. \n, • Ensure project assignments meet established technical requirements, budget, and time schedules. This includes guidance in the use of equipment and materials used in the spray process, testing for coating properties, and product evaluation.\n, • Oversees the maintenance and organization of spray test results and documentation.\n, • Keeps stakeholders informed of the status of assigned projects maintaining direct contact with Oerlikon Metco sales, materials and equipment business lines.\n, • Generates project proposal activities including quotations, scheduling, and specifying the required project tasks and goals; inclusive of designing test plans and performing thermal spray processing. Required to prepare technical reports and/or presentations for review.\n, • Evaluates metallurgical coating samples and reports for design intent; assessing coating specifications and if requirements were achieved.\n, • Maintains strict adherence to Oerlikon Metco internal procedures and safety regulations pertaining to thermal spraying and coating evaluation.\n, • Position may require travel to support CSC activities including on-site knowledge transfers, customer service issues, thermal spray system support and acceptance tests.\n, • Guides thermal spray operators within the CSC and supports knowledge transfers to various departments within Oerlikon Metco.\n, • Bachelor's degree in materials science/mechanical engineering or related field\n, • 3 years job experience in thermal spray or related field, preferred\n, • Master's degree is a plus\n, • Excellent written and verbal communications skills\n, • Highly developed quantitative analysis and problem solving skills\n, • Comprehensive and current knowledge of coating technologies and techniques\n, • Strong business acumen and ability to apply engineering science\n, • Must be proficient in using business and communications software (preferably Word, Excel, PowerPoint, common Windows operating systems, and Outlook)\n, • Comprehensive medical and prescription drug plan with low premiums, company sponsored HSA contributions and without cumbersome waiting periods to keep you going strong. \n, • Excellent Dental and Vision coverage.\n, • Employee Assistance, Financial and Wellness programs to help improve all aspects of your life journey. \n, • 401(k) retirement savings plan with significant company match and financial planning and education options to help you achieve your retirement goals \n, • Tuition reimbursement and internal education resources to satisfy your love of learning so you can continue to grow with us!\n, • Generous paid time off to support your physical and mental wellbeing.\n, • 12 paid company holidays to occasionally extend your weekends or time off. \n, • Flexible hours or remote work environment available for certain positions\n, • 100% company paid life insurance and disability insurance\n \n #joinoerlikonus #joinourteam \n Are you curious? Then release your passion to succeed and APPLY to discover how you can help us build a better world and realize how you can make a personal difference by joining our global team! Our commitment is your success! \n Oerlikon is required by law to include a reasonable estimate of the current compensation range for this position, which is $75,000 to $100,000 per year. Some positions within Oerlikon may also offer eligibility to participate in a discretionary incentive program. The salary of the finalist(s) selected for the role will be based on a variety of factors that are considered in making compensation decisions including, but not limited to, internal equity, job location, work experience, education, training, certifications, licenses, etc. Therefore, as compensation decisions are dependent on the facts and circumstances of each individual, it is likely that not all applicants will be hired at the highest end of the listed compensation range. Our total compensation package goes beyond base compensation and it will include a competitive benefits package starting with 2 weeks paid time off accrued on a monthly basis, 12 holidays, 48 hours personal/sick time (exception for NY where we follow State law,) medical, dental, vision, 401K, holidays, pet insurance and tuition reimbursement all effective day one of hire. \n\n\n\n \n \n\n

Job Description Line Engineer (Maintenance Technician) Location: Brookville Hotel @ JFK NEW YORK CITY 154-71 Brookville Boulevard | Rosedale, NY 11422 SUMMARY: Keep all equipment in good repair with a minimum of downtime by providing day-to-day maintenance of the hotel under the direction of Engineering Management. Continually work towards and support the improvement of engineering service to both guests and associates. RESPONSIBILITIES: • Report to work on time and in full uniform., • Train and instruct other members of the staff through sharing of knowledge and skills., • Operate as an independent mechanic by analyzing problems, identifying courses of action, and implementing solutions with available resources and to a high degree of quality., • Keep accurate completion and task records in the project files. Set an example of continuous self-development., • Plunging toilets, unclogging drains, repairing all types of hardware, plumbing, and electrical equipment including lamps, air conditioners and cosmetic items., • Clean, lubricate, protect, and otherwise maintain all tools and equipment in the hotel. See that all tools used are returned to the shop and secured in proper storage area., • To protect and otherwise maintain your assigned tool pouch and its tools at the discretion of the Engineering Management., • Monitor systems as necessary, to be fully informed of the system operation and to handle emergencies involving the systems., • Have a working knowledge of fire sprinkler and emergency power systems. Observe and analyze energy and utilities usage in the hotel and on the grounds., • Look for ways to conserve energy and report any ideas to the Engineering Management., • Be available for any emergencies and act in an engineering capacity to protect our guests and associates, and preserve the building and its systems during the emergency., • To act as quickly and responsibly as possible to return the building to its normal operating status. To inform Engineering Management of any such emergencies., • Be aware of all existing departmental Job Safety Analysis and to strive to work in an accident-free manner and to create a safe work environment for others., • Continuously look for conditions which may endanger associates or guests of the hotel and to take immediate action to correct any hazardous conditions found., • Read, log, track, and interpret readings from meters, gauges, and other measuring units., • Maintain a thorough log of each day’s activities and problems that occur and to ensure this information is passed on to other shifts., • Clean all engineering areas as directed by Engineering Management., • Work in a neat and efficient manner, keeping work areas clean and well organized., • Serve as otherwise directed or needed to help maintain the effective and efficient operation of the hotel at the discretion of Engineering Management or the hotel General Manager., • Complete all work assigned in a safe and professional manner. Maintain communications with supervisors to ensure that all needed materials, tools, and supplies are available or on order., • Follow up on any items that may be on back order. Keep supervisor updated on assignments., • Provide training and technical advice to other engineers as needed or requested., • Maintains a working knowledge of all federal, state, and local laws, codes, and regulations., • Maintains a professional image at all times., • Maintains the hotel facility and related equipment in a safe and efficient manner., • Provides for a safe work environment by following all safety and security procedures and rules., • Reads, learns, understands, and refers to the Standard Operating Procedures., • Each associate will be required to follow the rules as found in the M&R Employee Handbook. Performs other duties as assigned by management, of which employee is capable of performing

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Position Summary: The Manufacturing Engineer will plan and design product applications and machinery. The position is responsible for organizing highly complex activities for design, development, implementation, and maintenance of heat exchanger manufacturing processes. Supervisory Responsibilities: • None Duties and Responsibilities: • Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness, including determining root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods., • Design, install, and troubleshoot manufacturing equipment., • Identify opportunities and implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts., • Design testing methods and test finished products or process capabilities to establish standards or validate process requirements., • Design layout of equipment or workspaces to achieve maximum efficiency., • Review product designs for manufacturability or completeness; including purchasing equipment, materials, or parts and preparing documentation for new manufacturing processes or engineering procedures., • Evaluate manufactured products according to specifications and quality standards, including troubleshooting new or existing product problems involving designs, materials, or processes, • Develop sustainable manufacturing technologies and analyze the financial impacts of sustainable manufacturing, • Provide technical expertise or support related to manufacturing., • Develop, document and implement standard work instructions for critical manufacturing operations. Required Skills and Abilities: • Excellent people and communication skills are required (both oral and written)., • Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation, • Computer literacy in a MRP system (Oracle a plus), Microsoft Office., • Able to work under pressure, • Highly technical and analytical skills such (drawings, schematics, layout), • Able to think out of box., • Project management skills, • Highly organized and efficient, • Possess leadership and interpersonal skills, • Strong problem-solving skills Education and Experience: • Bachelor's degree in Industrial Engineering, • 3-5 years of progressive experience in manufacturing engineering., • Experience in metal fabrication, welding and/or brazing of pressure containing products., • Experience in a highly regulated industry, such as, Military, Aerospace, Nuclear or Automotive or other similar., • Due to ITAR Restrictions, an export license may be required. Other • Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder Compensation Employee Type: Salaried Salary Minimum: $85,000 Salary Maximum: $105,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Job Description Machine Maintenance Engineer Manager - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Facilities & Maintenance Engineer Manager will ensure that safety comes first in all efforts while directly supporting the needs of Production. This position will oversee the repairs, installations, and upkeep of facilities, equipment, and offices. This is a hands-on position where detailed knowledge of equipment and facilities is required. Their main duties include designing maintenance procedures, tracking budgets and expenses and performing inspections to find problems and make repairs. The position requires knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) for installation, preventative maintenance, repairs, and upkeep. Candidates with these skills will be considered. SUPERVISORY RESPONSIBILITIES • Supervise employees of the maintenance department. Duties and Responsibilities: • Maintain a safe work environment while meeting the needs of production., • Ability to work independently or as a part of a team., • Perform routine work throughout the production floor., • Monitor, repair, and cite problems with process and production equipment., • Coordinate with various contractors to obtain the necessary repair information, required parts, and procedures to complete various projects and tasks., • Designing maintenance procedures, tracking budgets and expenses, and performing inspections to find problems and make repairs., • Train and supervise employees of the maintenance department., • Responsible for machine and facility maintenance., • Facilitates and assists Facility property insurance company by scheduling and participating in regular facility audits and follows up to address and implement corrective actions when deemed appropriate., • Negotiate contracts with outside vendors for execution of maintenance work., • Ensure operational efficiency of electrical equipment and mechanical systems through timely inspection and repair., • Ensure that company premises and facilities are kept in clean and hygienic condition., • Perform other duties and assignments as required. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Machine & and Equipment Repair, • Ability to maintain, troubleshoot, disassemble, and repair production equipment in a safe manner while minimizing downtime., • Execute machine repairs, alignments, lubrication, coolant changes, etc., • Demonstrate a willingness to learn various systems throughout the multiple trades., • Electrical, HVAC, & Plumbing:, • Basic understanding of electrical systems, including DC and AC voltage ranging from 24V to 480V., • Be able to read, interpret, and modify electrical prints and schematics., • Experience in ladder logic, PLC’s, VFD’s, instrumentation and control devices., • Familiarity with the operation of gas and oil heating systems., • Familiarity with the general operation of air handlers, condensers, and evaporators EDUCATION AND/OR EXPERIENCE • Bachelor’s degree required., • Minimum of five to ten years of experience and/or training., • Background in general maintenance of manufacturing machines, • General knowledge of process equipment (i.e. automated systems, chillers, air compressors, hydraulics, pneumatics, etc.), • Demonstrate proficiency in the safe use of an array of hand and power tools., • Experience with MS Office is preferred. SAFETY • Support a safety culture on the production floor., • Observance of guidelines of the safe use, handling, and disposal of various chemicals used., • Knowledge of safety topics (i.e. Lockout Tagout, Arc Flash, Machine Guarding, Hazcom, DOT, RCRA, Material Handling, etc.) LEADERSHIP • The individual must be a problem solver., • Sound analytic skills and decision-making capabilities, • Strong results orientation and execution capability; Excellent strategic and tactical thinking, • Proven ability to effectively manage multiple priorities in a fast-paced environment and consistently meet deadlines and achieve desired results., • Demonstrated ability to lead, motivate and coach people in varying disciplines to achieve performance goals; Solid team building skills., • Excellent written and verbal communication skills; able to communicate as effectively on the shop floor as in the executive suite. PHYSICAL DEMANDS • Ability to lift 50lbs., • This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $140,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Candidates must live in the NYC area Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries, is currently seeking an experienced Firmware Engineer to participate in all aspects of the design and maintenance of hardware and firmware for its products. Candidate needs to demonstrate the ability to use appropriate development tools, compilers, and simulation. Must be capable of working within a team environment to plan, organize, execute and thoroughly document complex system designs. Test and debug skills are necessary; must understand interoperability of hardware and software. Must be able to manage and support multiple tasks on a consistent basis, while providing the highest level of service. Good verbal and writing skills are necessary. Full life-cycle software development; programming to include conceptual design, general coding, release to manufacturing testing, and quality assurance. Candidate needs to be able to produce final release software for manufacturing including associated documentation. Job Requirements: • A qualified candidate must have a BS or higher with 10+ years of relevant applied experience in Computer Science or Electrical Engineering. The ideal candidate will have a clear understanding of and hands-on experience with microprocessor firmware development., • Experience with Microcontroller competencies: Microchip, Nordic ARM cortex., • Experience with writing bootloaders for microprocessors on new and existing PCBAs., • Experience with writing embedded firmware in C for a Real-Time Operating System (RTOS)., • Experience with Bluetooth/NFC implementation., • Experience with network communication protocols (TCP/IP, UDP), • Experience with common communication protocols (I2C, SPI, RS485/RS232 and USB), • Experience with Microchip's Tools - MPLAB / MPLAB X / Harmony, • Experience developing embedded / IoT device software / firmware., • Knowledge and experience with analog, digital and embedded systems design, development, test engineering, and manufacturing., • Ability to read hardware block diagrams, schematics, and wiring diagrams., • Must be capable of thoroughly documenting complex system designs. Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description Power-Flo Technologies is committed to being the premier provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. We are looking for you to join our collaborative team as a Design Engineer. This is a full-time, on-site role. Primary Functions Responsible for design of electrical panels and schematics to meet customer requirements. Provide panel jobs quotes and estimates. Act as project management on panel jobs. Assist with customer technical support. Post-sales support on core products. Salary commensurate with experience (Range from $45,000 - $145,000 annually) Benefits Package • Medical, Dental, Vision, • PTO Program and Paid Holidays, • 401K, • EAP Design Engineer Essential Responsibilities • Review engineered contract drawings and specifications for the design of electrical control panels., • Design and layout of electrical panels using AutoCAD., • Ensure that all panels are being designed and constructed to UL Standards., • Creating Bill of Materials for the sales engineer team., • Create testing procedures for specific projects to be used by shop personnel., • Determine parameters to program variable frequency drives and soft starters., • 3 years+ experience in the design of electrical system preferred, • Ability to use AutoCAD for electrical design work., • Hold a degree in the engineering field., • Some Minor Lifting and Moving of Parts and Equipment We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description As iRocket advances toward frequent launches, we need a Test Engineer focused on hardware and launch infrastructure to validate subsystems, ground support equipment, integration, and launch-site readiness. The Role • Lead test programs for launch-pad hardware, ground support systems (GSE), avionics integration, and vehicle subsystem checkout., • Develop test plans, write procedures, execute dry-runs, and perform full system validation., • Troubleshoot hardware anomalies, manage data acquisition and reporting, work with cross-functional teams to close issues., • Support launch operations: pre-launch checkouts, integrated systems tests, post-launch data reviews, and lessons learned., • Bachelor’s degree in Engineering (Mechanical, Aerospace, Electrical, or related)., • 2+ years of test engineering experience in aerospace, launch, or hardware integration/test environment., • Experience with instrumentation, data acquisition systems, hardware integration, and test stand operations., • Comfortable working in a fast-paced environment with evolving requirements and launch cadence goals., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Job Summary: A LaserAway Laser Engineer will be responsible for all the laser maintenance, safety, and team communication that ultimately support all clinic operations. Continuous assessments and improvements allow our team to remain efficient and effective at LaserAway. Compensation: $90,000-$95,000 Annual Salary Overall Responsibilities: • Oversee all laser maintenance within the assigned territory, • Monitor ticket system, communication platforms, and emails for prompt responses, • Support New Store Openings by ensuring all equipment is functional, • Contribute to positive moral environments within clinic operations, • Establish positive co-worker partnerships for operational effectiveness, • Timely ticket responses to ensure operational readiness, • Ability to exceed expectations and aid in improving overall operations, • Exercise critical thinking and prioritize tasks based on business needs, • Contribute to the support system and demeanor for our clinic teams, • Professionally address non-work related topics with the team, • Prepare Weekly Reports to discuss overall equipment status and updates, • Contribute to a high morale and stress-free environment, • Ensure availability during all clinical operating hours, • Communicate any support needed in advance and professionally, • Properly utilize the communication channels with professionalism, • Coordinate with the medical team to assist in additional equipment training, • Maintain company vehicle in good standing and maintenance, • Maintain a minimum of 8 locations and or 100 medical devices, • Self-sufficient and creating a work schedule, • Support new clinics by scheduling time and meeting all equipment deadlines, • Support new clinics by completing all checklist responsibilities, • Excellent prioritization skills with high-priority to low-priority tasks, • Apply attention to detail to all maintenance processes, • Coordinate with 3rd party equipment repairs and facilitate issues/replacement parts and utilize efficient communication, • Absorb and continuously learn all maintenance procedures, • Nomenclature of Parts, • Part functions and interconnections, • Fault isolation of electrical components, • Optic Alignments, • Energy Software Calibrations, • Disassembly and reassembly of sub-components, • Minor wire splicing, harness repair, and soldering, • Schedule and perform routine maintenance on equipment and respond to on-call laser issues, • Ability to reinspect and quality check all individual processes, • Ability to request assistance to avoid negative business impacts, • Ability to invest time into advancing and seeking more knowledge, • Ability to manage stress and multiple issues efficiently, • Timely service call submissions and meeting attendance, • Ability to communicate professionalism and proper etiquette, • Communicate effectively to all teams, including down equipment or estimated times of repair, • Inventory Control- Maintain and account for all parts routinely, • Ability to adjust Preventative Maintenance schedule given other urgent tasks, • Ability to return damaged/repair parts and manage logistics effectively, • Ability to professionally address recommendations to management, • Ability to multitask while maintaining operational readiness, • Availability- Flexible with the on-call schedule and the ability to adjust per the needs of the operation, • Proficient computer skills including the use of email, video conferencing, Google spreadsheets, and ticket management systems, • Team player and supportive while covering for others, • Flexibility to cover out-of-state or out-of-territory remote clinics, • Proficiency with repair tools and techniques, • Excellent time management, organization, and prioritization abilities, • Maintain ongoing communication with the management and clinic team, • Knowledge of Electrical Safety and Theory, • Strong drive to complete tasks timely, • Maintain a clean driving record and valid identification, • Critical Thinking skills, • Punctual and accurate reporting, • Excellent verbal and written communication skills, • Strong analytical and problem-solving skills., • Ability to develop management skills, • Ability to prioritize tasks and delegate them when appropriate, • Preferred Education, bachelor's degree in the following fields, • Biomedical Engineering, • Project Management, • Electrical Engineer, • Any engineering, • Electrician, • HVAC, • Ability to work before, during, and after business hours, including weekends, • Conduct video meetings with a professional appearance, • Ability to organize the company vehicle, tools, and parts inventory, • Ability to maneuver and or climb an 8ft ladder, • Ability to stand for periods exceeding up to 4 hours, • Ability to drive up to 8 hours per day, • Ability to roll and or carry a tool bag to and from each clinic, • Ability to transport equipment up to 250lbs from location to location, • Ability to load and unload equipment in a company vehicle with a ramp inclined at 25 degrees, • Flexible to drive or fly to another territory and or out-of-state clinics, • Support other Laser Engineers during time off, emergencies, or as requested by management, • Ability to travel out of the territory for up to 5 days at a time LaserAway offers a generous pay structure with additional earning potential through performance review. Additional benefits include (but not limited to): • Healthcare benefits, • Dental, Vision, and 401(k), • Paid Time Away (PTA), • Generous employee discounts This job description is not all inclusive. In addition, LaserAway reserves the right to amend this job description at any time. LaserAway is an Equal Opportunity Employer. Employees must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. The Employer retains the right to change or assign other duties to this position.

Job DescriptionPosition Description: Software Engineer Intern AI, Automation & IT SystemsDay & Nite is modernizing the way commercial HVAC, refrigeration, and kitchen equipment services are delivered. Our Information Systems & Services team is at the core of this transformation, building AI systems, automating workflows, and upgrading infrastructure to support smarter business operations across 13 states and 160+ technicians. Were building internal tools and agentic AI platforms that do more than just report, they reason, act, and assist our teams in real time. What Youll DoThis hybrid role combines software engineering, data science exposure, and IT operations support. You will: Develop and maintain backend services (Python, FastAPI, Node.js) and integrate with platforms like SAMPro, Notion, Strapi, and ServiceChannel Work with large volumes of ERP and service data to build tools that combine AI and automation to improve business efficiency Support our internal tools (e.g., Chrome Extensions, React Native apps, ERP system) and assist with IT tasks, including software provisioning, access control, field device troubleshooting, and user tech support.Sample Projects Youll Support AI-powered agents that summarize work order history and provide status insights via chat Internal dashboards that ingest real-time technician data and provide recommendations, and analysis Automations for repetitive tasksWhat Youll Gain Hands-on experience in building and supporting agentic AI and automation in a live business context Exposure to the full lifecycle of data-driven AI projects: collection ? preprocessing ? modeling ? deployment Mentorship from IT engineers, software developers, and AI leads A chance to meaningfully impact our operational efficiency and automation endeavors Consideration for full-time employment based on performanceMinimum Qualifications - What You'll Bring Currently pursuing a bachelor's degree in Computer Science, Data Science, Information Systems, or a related field Strong interest in AI/ML, data pipelines, or backend system architecture Comfortable coding in Python, JavaScript/TypeScript, SQL, and PowerShell Curious about both software development and the operational side of IT Bonus: experience with APIs, Node.js, SQL Server, Azure, AWS, and Generative AI implementation $18.00 - $18.00 Hourly

We are looking for a Senior Manufacturing Engineer for our Westbury, NY facility. \n \n Your Responsibilities: \n • Support production activities to achieve shipment schedules through the development and design of methods, processes, specifications, tooling, jigs, fixtures and/or equipment modification in conformance with basic and sound engineering principles, policies and practices.\n\n, • Assure most efficient, economic and productive plant layout, material flow and machine and labor utilization by planning the layout of factory machinery, the sequence of manufacturing operations and the specific procedures required for the fabrication, assembly and/or test of Component's Group products. Prepare and carry out plans to change part or material specifications, manufacturing methods, material or product routing, etc. and/or devise holding mechanisms and required tooling to facilitate product manufacture.\n, • Reduce the cost to manufacture products and increase current efficiencies through research of newer or advanced technologies and development of proposals for automation and/or the redesign of methods, tooling, machine attachments, etc. Also, efficient methodizing will reduce direct labor and, therefore, product cost. Prepare cost estimates involved in the changing from the present to new methods and estimate cost savings as the result of such changes. Recommend or determine the critical make or buy decisions on the basis of the Component's Group technical capabilities, equipment, labor and available capital.\n\n, • Assure production of quality parts, components and products by verifying machine, equipment and tool efficiency and performance. Investigate and initiate corrective action of problems or deficiencies\n\n, • Assure timely introduction of new products and/or methods by communicating and documenting required production operations through the preparation of operation sheets, manufacturing data base entries (ERP (Routings), (Setup sheet info.), (AutoDesk/AutoCad), visual aids and CNC programs if required. In addition, the Senior Manufacturing Engineer is expected to evaluate schedule milestones in early phases of design and prototype work, monitor costs, and assure quality and serviceability are considered during design and manufacture.\n, • Assist in the development and design of new products by providing advice on and determining the producibility of design concepts and the specification requirements that best utilize existing equipment, technologies and manufacturing techniques. In this capacity, the Manufacturing Engineer will inform design engineers of both manufacturing limitations and opportunities and will advise Manufacturing Engineering Management of new capabilities that competitive designs will require for the factory. Provide manufacturing input and provide a smooth transition into efficient production.\n\n, • Support production activities to achieve shipment schedules through the introduction of new technologies, the development and design of methods, tooling, jigs, fixtures and/or equipment modification in conformance with basic and sound engineering principles, policies and practices.\n\n, • Program CNC machines through CAD/CAM, Conversational or manual methods.\n, • Setup, prove-out, and optimize part manufacturing on CNC machines.\n\n, • Train other manufacturing personnel on programming and setup of CNC machines.\n \n Your Profile: \n\n • A Bachelor’s degree in Manufacturing Engineering or a related discipline or the equivalent in experience. \n, • Knowledge of CAD/CAM and a strong knowledge of CNC Programming are necessary. \n, • A full understanding of manufacturing process and the ability to fully apply the theories and concepts of manufacturing is essential.\n, • Typically, the degreed incumbent would require 4 - 5 years directly related experience to perform at this level. \n, • Ten years of varied machine shop, tool making.\n, • CNC programming and machining or other specialized manufacturing experience would be required for non-degreed employees to perform at this level.\n\n \n We offer: \n Aside from a dynamic global culture and leading market position, we are proud to offer our employees development opportunities, competitive salary and a robust benefit program ALL available on first day of employment! \n The perks and benefits of working at Oerlikon include the following: \n\n • Comprehensive medical and prescription drug plan with low premiums, company sponsored HSA contributions and without cumbersome waiting periods to keep you going strong. \n, • Excellent Dental and Vision coverage.\n, • Employee Assistance, Financial and Wellness programs to help improve all aspects of your life journey. \n, • 401(k) retirement savings plan with significant company match and financial planning and education options to help you achieve your retirement goals \n, • Tuition reimbursement and internal education resources to satisfy your love of learning so you can continue to grow with us!\n, • Generous paid time off to support your physical and mental wellbeing.\n, • 12 paid company holidays to occasionally extend your weekends or time off. \n, • 100% company paid life insurance and disability insurance\n, • Employee Referral Bonus program because why not to bring your friends to work everyday!\n\n \n Why Oerlikon: \n Innovation and innovators thrive at Oerlikon, a leader in engineering solutions that enhance the performance of our products and services. We are diverse in our perspectives but united in our purpose: to develop technologies that reduce resource and energy consumption and help build a healthier, more sustainable and better protected world \n \n #joinoerlikonus #joinourteam \n \n Are you curious? Then release your passion to succeed and APPLY to discover how you can help us build a better world and realize how you can make a personal difference by joining our global team! Our commitment is your success! \n \n For individuals assigned, hired to work or working remotely in/out of California, Colorado, Connecticut, Illinois, Nevada, Washington State, or New York, Oerlikon is required by law to include a reasonable estimate of the current compensation range for this position, which is $110,000 to $130,000 per year. Some positions within Oerlikon may also offer eligibility to participate in a discretionary incentive program. The salary of the finalist(s) selected for the role will be based on a variety of factors that are considered in making compensation decisions including, but not limited to, internal equity, job location, work experience, education, training, certifications, licenses, etc. Therefore, as compensation decisions are dependent on the facts and circumstances of each individual, it is likely that not all applicants will be hired at the highest end of the listed compensation range. Our total compensation package goes beyond base compensation and it will include a competitive benefits package starting with 2 weeks paid time off accrued on a monthly basis, 12 holidays, 48 hours personal/sick time (exception for NY where we follow State law,) medical, dental, vision, 401K, holidays, pet insurance and tuition reimbursement all effective day one of hire. \n \n Agencies: \n Oerlikon only accepts agency resumes for positions that have been explicitly approved by HR for third-party support. We work exclusively with our approved vendors who have agreed to Oerlikon’s terms and conditions and have an executed contract in place. Any resumes or profiles submitted to Oerlikon employees for roles not approved and requested by HR will be considered unsolicited, and Oerlikon will not be obligated to pay a placement fee.

Engineer High Speed Plastic Molding - Long Beach, NY Plastics Engineer Process Engineer Manufacturing Engineer Project Engineer Plastic Molding Injection Mold Blow Extrusion Tooling Designer Moldmaking Lean Applications Thermoplastics Thermoset _ . Seeking individual able to apply knowledge of process engineering and setup optimization for injection molding operations in automotive component part manufacturing. Shall: * Analyze current production processes and provide quality improvement and cost reduction plans. * Implement improvements to existing molding equipment and processes. * Train new process and setup personnel on plastic injection molding machinery, procedures and activities. Experience & Education: * Bachelors Degree in Engineering discipline or Plastics related field. * 5+ years injection molding process engineering in plastic automotive component part manufacturing. * Strong knowledge of industrial automation, skills with Six Sigma, Lean Manufacturing or Kaizen events. Potential total compensation package up to $160,000 including production performance bonus; company matched 401(k); company paid family doctor, hospitalization, prescription, dental and vision; life and disability insurance; tuition reimbursement; employee assistance programs, and more. For complete details contact Christopher Moreno at: (609) 584-9000 ext 264 Or submit resume online at: Or email to: Please reference #427201NY1266 when responding. Diedre Moire Corporation Education Requirements: Bachelor DegreeMinimum Experience Requirements: 5-10 yearsJob City Location: Long BeachJob State Location: NYJob Country Location: USASalary Range: $90,000 to $160,000 Diedre Moire Corporation, Inc. diedremoire.com WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Plastics Engineer Process Engineer Manufacturing Engineer Project Engineer Plastic Molding Injection Mold Blow Extrusion Tooling Designer Moldmaking Lean Applications Thermoplastics Thermoset #DiedreMoire #PlasticMolding #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #manufacturingjobs #ProcessEngineerJobs DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove"" in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call (609) 584-5499