Facility maintenance technician jobs in Cicero, New YorkCreate job alerts

Job Description Job Summary: The Automotive Technician is responsible for performing vehicle repair and maintenance work as assigned in accordance with dealer and factory standards. They will also oversee the work of any apprentice technician assigned to them. Essential Job Duties and Responsibilities: (Additional duties as assigned) • Receive repair orders from Team Leader and take to stall area., • Perform work as outlined in repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Diagnose the cause of any malfunction and perform repair., • Communicate with the parts department to obtain needed parts., • Save and tag parts if the job is under warranty or if requested by the customer., • Examine the vehicle to determine if additional safety or service work is required., • Advise service advisor and/or Team Leader immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the time promised., • Document work performed., • Road-test vehicle when required or refer to the Team Leader, keeping in mind that the customer’s vehicle should not be used for personal errands., • Supervise the work of any apprentice as assigned., • Attend factory-sponsored training classes., • Keep abreast of factory technical bulletins., • Ensure that customers’ cars are kept clean., • Keep the shop area neat and be able to always account for all dealership-owned tools. Return special tools to tool kit in tool room., • Understand and follow federal, state, and local regulations, such as those governing the disposal of hazardous waste., • Be familiar with MSDS location and information. Must wear and/or use all provided protective items, including eye protection, guards, etc., • Road test vehicle to quality check work performed as necessary., • Maintain CSI in top 10% of group., • Adhere to dealership policies and procedures set forth by dealership management and manufacturer specifications. Required Experience and Education: • High School Diploma or General Educational Diploma (GED), • Knowledge of automotive repair and maintenance., • Ability to read and comprehend instructions and information., • Working knowledge of all aspects of repairs for vehicles., • Ability to interpret vendor catalogs., • Must have knowledge of machines, tools including their designs, uses, repairs and maintenance., • Time-management and organizational abilities., • Problem-solving and critical thinking abilities., • Ability to sit, stand, walk, talk, hear, use hands to finger, grasp, handle or feel, push, pull, reach, crouch, bend, kneel, climb, and perform repetitive motions of the hands and/or wrists., • Exerts up to 50 pounds of force occasionally, and/or up to 70 pounds of force frequently to lift, carry, push, pull, or otherwise move objects., • Work is performed in a dealership service department., • Occasional weekend and evening hours are required., • Hazards: Slips, trips and falls, ergonomic injuries, and occasional lifting., • Safety Precautions: Breaks are encouraged to allow for stretching and training is provided covering slips, trips, and falls, safe lifting and stretching techniques.Disclaimer:, • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee(s) occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor., • The dealership reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Job DescriptionJob Title: Mechanial Tech : pay $20 per hour: Liverpool, NY 6 Week Project!! We are seeking a hands-on Mechanical Technician who is confident and capable in the installation of materials and skilled in the use of power tools. This role is ideal for someone who enjoys working in a fast-paced, team-oriented environment and takes pride in delivering high-quality mechanical work. Key Responsibilities: • Install mechanical components, systems, and materials according to specifications and blueprints, • Operate a variety of power tools and hand tools safely and effectively, • Assist with assembly, fabrication, and maintenance of mechanical systems, • Follow safety protocols and maintain a clean, organized work area, • Collaborate with engineers, supervisors, and other technicians to complete projects on time, • Perform quality checks to ensure installations meet required standards, • Troubleshoot and resolve mechanical issues as they ariseQualifications:, • Previous experience in mechanical installation or a related field preferred, • Comfortable using power tools (e.g., drills, saws, grinders, impact wrenches), • Ability to read and interpret technical drawings or schematics is a plus, • Strong attention to detail and commitment to safety, • Reliable, punctual, and able to work independently or as part of a team, • High school diploma or equivalent required; technical training a plus Why Work Here? Working here offers the opportunity to be selected for a travel team and gain exposure to an Amazon site. It is a chance to work with industry leaders and enhance your skills in a dynamic environment. Work Environment You will be working inside an Amazon facility, a large warehouse with many moving parts. Collaborate with PAC Advisors and Aerotek Services. The dress code includes steel-toed boots, jeans, and a work shirt. The work schedule is Monday through Friday, with occasional shifts on Saturdays, ranging from 8 to 10 hours per day. Pay and Benefits The pay range for this position is $20.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Liverpool,NY. Application Deadline This position is anticipated to close on Oct 30, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Are you looking for an opportunity to independently service a territory with the ability to spend most of that time outdoors? What if that opportunity included competitive pay and a generous benefits package, with the largest HVAC preventive maintenance company in the nation? The BFC Solutions team is excited to meet you to explore a Filter Technician role open near you! As a Filter Tech you will enjoy the following benefits: Monday- Friday workday, plus overtime as needed Competitive pay rate Weekly paycheck Company take-home vehicle, dedicated to company use Company phone Potential overnight travel with expenses paid The BFC benefits package includes: • Health insurance, • Vision insurance, • Dental insurance, • 401(k) with employer matching, • 8 paid holidays, • Paid time off, • Multiple opportunities for career advancement As a BFC Solutions Filter Technician, you will replace air filters and perform basic HVAC maintenance primarily in rooftop air ventilation and HVAC systems for retail and commercial customers. Job Requirements: • Must be at least 21 years of age to operate the company vehicle., • Must possess and maintain a valid driver's license and have a good driving record (no DUIs or multiple infractions, subject to monthly review)., • Must live within 40 miles of the designated region., • Must be comfortable and confident working at heights up to 40 feet above ground level and using extension ladders., • Must weigh less than 275 pounds to meet ladder safety and weight limit requirements., • Must be comfortable working outside in all weather conditions., • Proven success working independently with remote supervision., • Must be willing and able to work overtime as required., • Must be able to lift and carry up to 75 pounds, • Overnight travel required during peak times. Meals and accommodation are paid for by the company. Additional details are to be provided during your interview with the hiring manager. Preferred work experience includes any of or a combination of the following: • Facility and/or grounds maintenance, • Construction, • HVAC, • Cable installation, • Route driving #ind123

Job Description We are currently hiring an Architectural Technician in our Architectural division at our Syracuse office. The Architectural Division at LaBella provides comprehensive planning and design within dedicated studios with projects ranging from targeted renovations and facility maintenance to projects that define communities. We believe architecture is more than creating, maintaining, and resurrecting the buildings in which we live, work, learn, and engage – it’s about beautifying and bettering the communities we call home. The overall expectations of this position are to produce construction drawings and understand basic construction practices for implementation during construction administration. Additionally, this position will be expected to produce presentation graphics, conceptual 3d models, and be capable of drafting redlines and creating outline floor plans in an efficient manner. Basic construction administration will be performed. It must be understood that assignments and hence supervision will differ from time to time. A successful candidate will be self- motivated with the willingness to learn, train, and continue building their architectural knowledge. The candidate will be trustworthy and punctual have a positive attitude and possess leadership and communication skills. Requirements • Minimum 3 year of experience working for an Architectural/Engineering Consultant., • Minimum associates degree (Bachelor’s degree in Architecture desirable)., • Proficient in Revit., • Must have good planning skills. Salary Range: $45,000.00 - $65,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionLaboratory Technician Why Byrne At Byrne, we foster a culture built on teamwork, excellence, and professionalism. Our greatest strength lies in the exceptional talent and dedication of our team members across every part of the organization. We value their contributions and ensure they’re recognized, rewarded, and compensated in ways that reflect their impact and expertise. Pay and Benefits • Salary Range – $24.50-$34.00 per hour, • Competitive bonus programs, • Medical, Dental, Vision benefits available day 1 of employment, • Supplemental benefits available on day 30 of employment, • Eligible for 401 (k) with a company match available on day 90 of employment 6750 Benedict Road W East Syracuse, NY 13057 Front Half Nights - 6pm-630am Job Overview The Laboratory Technician plays a key role in executing assigned quality tasks. This includes setting up, operating, cleaning, and troubleshooting production equipment in accordance with standard operating procedures. Key Responsibilities • Perform microbiological testing on raw milk, finished dairy products, and processing equipment to detect harmful bacteria such as Salmonella, E. coli, and Listeria while conducting plate counts, pathogen screening, and shelf-life studies to ensure products meet safety standards and regulatory requirements., • Conduct chemical and physical analyses including fat content, protein levels, moisture content, pH measurements, and acidity testing using laboratory instruments such as spectrophotometers, titrators, and analytical balances to verify product specifications and nutritional labeling accuracy., • Collect samples from various production stages including incoming raw materials, in-process products, and finished goods following proper sampling protocols and chain of custody procedures while maintaining sample integrity and traceability throughout the testing process., • Operate and maintain laboratory equipment such as incubators, autoclaves, microscopes, and chromatography systems while performing routine calibrations, quality control checks, and preventive maintenance to ensure accurate and reliable test results., • Document all test results, observations, and non-conformances in laboratory information management systems (LIMS) and prepare detailed reports for quality assurance teams, regulatory agencies, and production management while maintaining compliance with FDA and USDA documentation requirements., • Minimum of GED or High School Diploma is required., • Associates degree in dairy/food sciences or equivalent highly preferred Headquartered in LaFayette, Byrne is a Central New York-based dairy company with a legacy spanning over 90 years. Its operations include an extended shelf-life (ESL) and ultra-high temperature (UHT) pasteurization plant in DeWitt, as well as an ESL manufacturing facility in Cortlandville. Byrne also maintains warehouse facilities in Syracuse and East Syracuse, along with a dedicated ice cream center in Syracuse. As a recognized industry leader, Byrne continues to drive innovation at the forefront of dairy processing and product development

Job Description Maintenance Repair Technician (CNC) – 2nd Shift Location: Syracuse, NY Industry: Manufacturing & Production Job Category: Manufacturing - Production Compensation Range: $72,508 Job Type: Full-Time About the Opportunity: Join a leading manufacturer in the electrical and power management industry as a CNC-focused Maintenance Repair Technician on 2nd shift. This is a hands-on opportunity at a high-tech facility in Syracuse, where you'll apply both mechanical and electrical expertise to maintain and troubleshoot advanced CNC equipment. Ideal for mechanically inclined professionals with a background in industrial maintenance and machining. What You’ll Do: • Diagnose and repair complex mechanical and electrical issues on CNC and industrial machinery., • Tear down, inspect, and rebuild machines following safety and operational standards., • Troubleshoot electrical systems using ladder logic, schematics, and testing procedures., • Conduct electrical test operations and make necessary adjustments for performance., • Perform preventive and corrective maintenance across various production equipment., • Interpret complex blueprints, manuals, and circuit diagrams., • Communicate abnormal equipment conditions to supervisors., • Support production continuity by ensuring minimal machine downtime., • Use sound judgment when working from instructions, procedures, or schematics., • Work from 2:30 PM to 11:00 PM, Monday through Friday. What You Bring: • High school diploma or equivalent required, • Minimum of 3 years manufacturing maintenance experience, • (or 1 year with a relevant technical degree or military background), • Proficiency in reading ladder logic and industrial motor control schematics, • CNC maintenance and troubleshooting experience required, • Background in machining and electrical systems strongly preferred, • Experience with hydraulics is a plus, • Strong problem-solving skills and ability to work independently What’s Offered: • Base salary: $72,508, • Full benefits package, • Relocation assistance available, • Interview travel reimbursement, • Stable 2nd shift schedule, • Opportunity to work with cutting-edge manufacturing technology Want to Stand Out? We invite candidates to record a short video to showcase who they are. This should feel low-pressure and personal. Video submission link:

Job Description Now Hiring: Maintenance Technician Location: Apex Entertainment Syracuse Apex Entertainment is looking for dependable and skilled Maintenance Technician to join our team! In this role, you'll be responsible for maintaining the appearance, functionality, and safety of our buildings, grounds, and amusement attractions - ensuring our facility operates at the highest standard each day. If you're hands-on, proactive, and take pride in keeping things running smoothly, we'd love to hear from you. Position Overview: As a Maintenance Technician, you'll play a key role in minimizing downtime, performing preventative maintenance, and keeping the entire facility clean, safe, and operating efficiently. You'll help ensure every guest enjoys a well-maintained, like-new environment from the moment we open. Key Responsibilities:

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Syracuse, NY. These are mainly first shift opportunities with a pay range of $20-25/hour, dependent on experience & skill level. If you are a Maintenance Technician and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope (can include any or all of the following): • Perform Preventative & Corrective Maintenance on Machinery & Equipment, • Maintain Equipment & Facility to Ensure Maximum Reliability, • Electrical, Hydraulic & Pneumatic Maintenance, • Troubleshoot, Diagnose and Develop Solutions for Issues with Equipment, • Tech Maintenance, • Work on Business Unit Facilities, Equipment, Tooling, etc., • Repair work, • Some Welding, • General Building Maintenance, HVAC & Plumbing Repairs, • Able to Read and Understand Blue Prints & Schematics, • Tools of the Trade, • Proper PPE must be worn, • Safety Oriented, • Prior Construction Experience Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description Job Summary: The Maintenance Technician/Custodian is responsible for maintaining the cleanliness of the service department within the dealership. Their job is to uphold the health and safety of a building’s occupants by ensuring proper sanitation and a clean work environment. Essential Job Duties and Responsibilities: (Additional duties as assigned) • Cleans the interior of buildings including floors, carpet, rugs, windows and walls, • Shampooing and or vacuuming rugs and carpets, using equipment, commercial vacuums, floor buffers and carpet cleaners, • Collecting and taking out trash and recycling, • Paint and clean up walls as needed, • Sanitizing restroom facilities, • Ordering cleaning supplies as needed and maintaining a thorough inventory, • Be familiar with SDS location and information. Must wear and/or use all provided safety/protective items., • Notifies managers concerning the need for major repairs or unsafe conditions., • Coordinates, participates in, and/or attends committees and meetings as assigned or as appropriate., • Adheres to dealership policies and procedures set forth by dealership management and manufacturer specifications., • Assist Service and Reconditioning department with transporting customer & company vehicles on site., • Assist with snow & ice removal in parking lot and foot traffic areas., • Assist with landscaping during mowing seasons, spring, summer and fall where applicable., • Ability to stand and walk for long periods of time, • Ability to lift and move over 50 pounds, • Knowledge of different cleaning products and tools, • Time-management and multitasking abilities, • Physical strength and stamina, • Organizational skills, • Good verbal communication and interpersonal skills, • Ability to sit, stand, walk, talk, hear, use hands to finger, grasp, handle or feel, push, pull, reach, crouch, bend, kneel, climb, and perform repetitive motions of the hands and/or wrists., • Exerts up to 50 pounds of force occasionally, and/or up to 70 pounds of force frequently to lift, carry, push, pull, or otherwise move objects., • Must be able to work in all types of inclement weather outdoors and work indoors., • Hazards: Slips, trips and falls, ergonomic injuries, and occasional lifting., • Safety Precautions: Breaks are encouraged to allow for stretching and training is provided covering slips, trips, and falls, safe lifting and stretching techniques.Disclaimer:, • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee(s) occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor., • The dealership reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Job Description Summary/Scope of Work: Provide contractor logistic support for Marine Corps Gunnery & Driving simulators. This offer is available contingent upon contract award. Job Description: The Electronics Technician Maintenance II applies basic and some advanced technical knowledge to solve routine problems by interpreting manufacturers' manuals or similar documents. Work requires familiarity with the interrelationships of circuits and judgment in planning work sequence, in selecting tools, testing instruments, and is reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required, from supervisor or higher-level technician. Duties and Responsibilities: • Schedule periodic courses of instruction, • Reference training manuals to determine the course of instruction, • Develop/follow lesson plans for various simulators, • Update lesson plans as changes occur for various simulators, • Incorporate new training and changes into simulator training, • Set up instruction site for training, • Prepare and print handouts for students, • Establish operating schedule at unit facility; prepare training systems for operations, operate training systems IAW training system O&M manuals, technical manuals and drawings; perform shutdown tasks at the end of training, • Perform PMCS and Operator-level repairs as required, report maintenance issues to the appropriate repair facility., • Assist in system testing events and provide expertise in identifying and demonstrating system failure issues, operation or operator failures, • Use various test equipment such as: digital multi-meters, oscilloscopes, frequency counters, logic analyzers, sine wave generators, fiber optic test equipment and other special test equipment, • US Citizenship, • Prior military experience, • Minimum three (3) years’ experience in electronic technology discipline or training, • Experience as staff/instructor, • Familiarity with devices such as AGTS, ODS, LAV-DT, • Knowledge in simulations and MS Office, • Ability to communicate both verbally and in writing in a clear and concise manner, • Working knowledge/understanding of military protocol/chain of command, • Ability to maintain effective working relationships, professional demeanor, and attitude; ability to work cooperatively with military and civilian workforce, • Occasionally training may be conducted on the weekend and one may be required to work on Saturday and Sunday., • Background in or working knowledge of the Military The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed, and perform special projects as assigned. OT Training Solutions, LLC is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status or disability status.

Job Description Job Title: Facility Technician Company Introduction: G&C Food Distributors is a leading re-distributor of refrigerated, frozen, and dry food. We store and deliver more than 4,000 food items to meet the needs of our customers across 28 states and 35 countries internationally. In recent years, G&C Foods has grown to be one of the most respected redistributors in the United States, and we are rapidly expanding all areas of our organization. Location: Syracuse, NY Schedule: Sunday through Thursday Job Summary: The Facilities Technician is a highly skilled individual who provides technical facility support and upkeep. This is achieved through the direction and oversight of certified vendors and service groups responsible for maintenance and upkeep of the critical processes at the G&C Facility, as well as routine hands-on maintenance and troubleshooting. This person will also be responsible for detailed scheduling, reporting, and tracking of preventative and routine maintenance of facility equipment. This position is largely self-regulated daily. This individual must be able to work independently and be capable of critical decision-making. Duties and Responsibilities: • Regular coordination with the Facility Manager for daily tasks., • Respond to all service requests as quickly and efficiently as possible by utilizing shift end reports to plan accordingly. Complete all necessary documentation associated with the service request., • Complete daily and monthly rounds/temperature checks., • Check and maintain mechanical, electrical, pump hose, riser rooms, exhaust fans, and any other functional or safety concerns., • Ammonia system monitoring, preventative maintenance scheduling, and troubleshooting., • Take after-hours "on call" duties as assigned., • Monthly inspections and immediate attention to areas posing risks to the life safety of employees and visitors., • Excellent diagnostic skills, • Strong understanding of mechanical disciplines, • Experience in dealing with outside vendors and service representatives, • Strong attention to detail and sense of urgency in completing job tasks, • Ability to follow instructions efficiently, • Ability to maintain a friendly, professional attitude with prospects and colleagues, • High School Diploma or equivalent required, • Valid NYS Driver's License At G&C, we believe exceptional people deserve exceptional rewards. When you join our team, you’re not just taking a job; you’re stepping into a career with a company that invests in your growth, values your contribution, and celebrates your success. Our Benefits Package Includes: • Competitive Health Coverage – Medical plans starting at just $24.73/week, plus comprehensive vision, dental, and a 401(k) with company match to secure your future., • Company-Paid Life Insurance – Because your peace of mind matters., • Performance-Based Bonuses – Earn up to the equivalent of five additional weeks’ pay each year based on your impact and results., • Onsite Fitness & Wellness Centers – Stay active and healthy without leaving the workplace., • Flexible Scheduling Options – Designed to support your life outside of work., • Company Culture Perks – From team cookouts and appreciation events to seasonal holiday gifts, we celebrate our people year-round., • Exclusive Employee Product Discounts – Access unbeatable prices on a wide range of products, available only to our team., • Career Advancement – Clear pathways to grow within the company, backed by leadership who invest in your success., • Open-Door Leadership – Access to decision-makers who listen, act, and value your input., • Annual Flu Clinics – Convenient, no-cost health support right at work. Contact/Application Information: If you’re interested, please apply through Indeed. If you have any questions, you can email . Thank you for your interest, and we look forward to meeting you! #ADP1

Job Description Summary/Scope of Work: Provide contractor logistic support for Marine Corps Gunnery & Driving simulators. This offer is available contingent upon contract award. Job Description: The Electronics Technician Maintenance III applies advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers' manuals or similar documents. Examples of such problems include determining the location and density of circuitry, evaluating electromagnetic radiation, isolating malfunctions, and incorporating engineering; changes. Work typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices. Duties and Responsibilities: • Schedule periodic courses of instruction, • Reference training manuals to determine the course of instruction, • Develop/follow lesson plans for various simulators, • Update lesson plans as changes occur for various simulators, • Incorporate new training and changes into simulator training, • Set up instruction site for training, • Prepare and print handouts for students, • Establish operating schedule at unit facility; prepare training systems for operations, operate training systems IAW training system O&M manuals, technical manuals and drawings; perform shutdown tasks at the end of training, • Perform PMCS and Operator-level repairs as required, report maintenance issues to the appropriate repair facility., • Assist in system testing events and provide expertise in identifying and demonstrating system failure issues, operation or operator failures, • Use various test equipment such as: digital multi-meters, oscilloscopes, frequency counters, logic analyzers, sine wave generators, fiber optic test equipment and other special test equipment, • US Citizenship, • Prior military experience, • Minimum three (3) years’ experience in electronic technology discipline or training, • Experience as staff/instructor, • Familiarity with devices such as AGTS, ODS, LAV-DT, • Knowledge in simulations and MS Office, • Ability to communicate both verbally and in writing in a clear and concise manner, • Working knowledge/understanding of military protocol/chain of command, • Ability to maintain effective working relationships, professional demeanor, and attitude; ability to work cooperatively with military and civilian workforce, • Occasionally training may be conducted on the weekend and one may be required to work on Saturday and Sunday., • Background in or working knowledge of the Military The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed, and perform special projects as assigned. OT Training Solutions, LLC is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status or disability status.

Job DescriptionLaboratory Technician Why Byrne At Byrne, we foster a culture built on teamwork, excellence, and professionalism. Our greatest strength lies in the exceptional talent and dedication of our team members across every part of the organization. We value their contributions and ensure they’re recognized, rewarded, and compensated in ways that reflect their impact and expertise. Pay and Benefits • Salary Range – $24.50-$34.00 per hour, • Competitive bonus programs, • Medical, Dental, Vision benefits available day 1 of employment, • Supplemental benefits available on day 30 of employment, • Eligible for 401 (k) with a company match available on day 90 of employment 6750 Benedict Road W East Syracuse, NY 13057 Wednesday through Saturday with every other Wednesday off. 6am-630pm Job Overview The Laboratory Technician plays a key role in executing assigned quality tasks. This includes setting up, operating, cleaning, and troubleshooting production equipment in accordance with standard operating procedures. Key Responsibilities • Perform microbiological testing on raw milk, finished dairy products, and processing equipment to detect harmful bacteria such as Salmonella, E. coli, and Listeria while conducting plate counts, pathogen screening, and shelf-life studies to ensure products meet safety standards and regulatory requirements., • Conduct chemical and physical analyses including fat content, protein levels, moisture content, pH measurements, and acidity testing using laboratory instruments such as spectrophotometers, titrators, and analytical balances to verify product specifications and nutritional labeling accuracy., • Collect samples from various production stages including incoming raw materials, in-process products, and finished goods following proper sampling protocols and chain of custody procedures while maintaining sample integrity and traceability throughout the testing process., • Operate and maintain laboratory equipment such as incubators, autoclaves, microscopes, and chromatography systems while performing routine calibrations, quality control checks, and preventive maintenance to ensure accurate and reliable test results., • Document all test results, observations, and non-conformances in laboratory information management systems (LIMS) and prepare detailed reports for quality assurance teams, regulatory agencies, and production management while maintaining compliance with FDA and USDA documentation requirements., • Minimum of GED or High School Diploma is required., • Associates degree in dairy/food sciences or equivalent highly preferred Headquartered in LaFayette, Byrne is a Central New York-based dairy company with a legacy spanning over 90 years. Its operations include an extended shelf-life (ESL) and ultra-high temperature (UHT) pasteurization plant in DeWitt, as well as an ESL manufacturing facility in Cortlandville. Byrne also maintains warehouse facilities in Syracuse and East Syracuse, along with a dedicated ice cream center in Syracuse. As a recognized industry leader, Byrne continues to drive innovation at the forefront of dairy processing and product development

Job Description Floor Maintenance Technician / Projects Cleaner / Custodian / Janitor Immediate openings! We will train you! Position to start immediately. On-the-job training provided. Weekly Pay! Ongoing Training is provided. Job Duties Include (but not limited to): • Regular use of medium to heavy equipment such as floor buffers, carpet cleaner, auto floor scrubbers and other hands on equipment., • Tile and Grout cleaning, • Performing deep clean services, • Stripping & Refinishing VCT floors to rid of damaged floor finish and reapply, • Keeping supplies and equipment organized and well stocked., • Maintaining cleanliness of company vehicles, • Commercial window cleaning, • Post-construction clean up, • Pressure washing Flexible Shifts: We understand that everyone's schedule is different. That's why we offer various shifts, including mornings and evenings, to accommodate your availability. Competitive Compensation: • Hourly Wage: Starting at $19.00 per hour, depending on your location and experience. Your hard work deserves recognition! About Cleantec: Cleantec isn't just another cleaning company; we're Central New York's premier full-service janitorial and facility maintenance provider. With offices in Syracuse, Ithaca, Binghamton, Rochester, Buffalo, Utica, and Albany, we cover the entire New York region. At Cleantec, we're more than just a company; we are a team and we foster a collaborative and inclusive work culture. Join the Cleantec Team: If you're ready to contribute to our mission, we invite you to join our team. At Cleantec, we value diversity and consider all qualified applicants without regard to race, gender identity, religion, sex, color, national origin, age, disability, marital status, or military/veteran status, in accordance with applicable federal, state, and local regulations. Equal Employment Opportunity. We consider all qualified applicants without regard to race, gender identity, religion, sex, color, national origin, age, disability, marital, or military/ veteran status in accordance with applicable federal, state, and local regulations. Apply Today! Ready to take the next step in your career? Apply now and become part of our team dedicated to maintaining a clean and welcoming environment! Req. HELP-2357 Requirements At Cleantec, we believe in assembling a team of individuals who bring their best to the table. Here are the qualifications we're seeking in our Janitorial Workers, Commercial Cleaners, and Custodians: • Current Valid Driver’s License, • Positive Work History: A track record of reliability and dedication., • Meticulous Attention to Detail: The ability to spot even the tiniest speck of dust., • Customer Service Skills: A friendly and helpful attitude toward our valued customers., • Exceptional Communication: Effective verbal and written skills to keep everyone in the loop., • High School Diploma/GED: A foundational educational background to support your success., • Physical Capability: The ability to lift up to 50 pounds to tackle the heavy-duty cleaning tasks. At Cleantec, we believe that taking care of our team is just as important as taking care of our customers. Here are the benefits you can look forward to as a member of our Cleantec team: Life Insurance: We've got your back, ensuring peace of mind for you and your loved ones. Paid Time Off: Everyone needs a break! Enjoy paid time off to recharge and rejuvenate. Employee Referral Program: Share the love! Refer talented individuals to join our team and earn rewards. Monthly Incentives: Your hard work doesn't go unnoticed! Earn bonuses and recognition for achievements like Employee of the Month, Perfect Attendance, and more. Insurance Benefits and 401K: When applicable, we offer comprehensive insurance benefits and a 401K plan to secure your financial future.

Job Description One of the largest Facility Maintenance providers in North America is Hiring! We're looking for a skilled HVAC/Refrigeration Technician with the ability to work alongside our team of other technicians. As an HVAC Technician, you will be responsible for commercial installations and repairs, executing service and maintenance contracts, and should be proficient in troubleshooting refrigerant-based systems, electrical and installation. We are looking for a technician who can work independently on projects and take initiative when necessary. Responsibilities: • Diagnose problems and make repairs., • Repair heating and air conditioning systems., • Test systems to ensure proper operation., • Install and repair gas, oil, and electric furnaces, condensing units, heat pumps, and any other heating or cooling equipment., • Test all safety devices on gas furnaces., • Install, repair and maintain domestic water heaters., • Isolate faults in electrical circuits using testing and reading electrical schematics., • 3 years experience HVAC, • EPA Type II license, • Available to work weekends on a revolving schedule, • 10 hour shifts, • 2 shifts available Sun - Wed or Wed - Sat 7am-5:30pm, • Salary Range: $35.00/hr - $40.00/hr, • Full Time, • Opportunity for overtime, • Paid Holidays and vacation time, • Opportunity for growth Pritchard Industries is an Equal Opportunity Employer and will consider all qualified applicants without regard to race, color, creed, genetic information, religion, national origin, ethnicity, gender; gender identity, sexual orientation, pregnancy, childbirth or related medical condition, age, disability, or handicap, servicemember status, relationship or association with a protected veteran, and any other category protected by Federal, state, or local law. . #LI-DNI

Valve Technician (Night Shift) We are working with a long-standing food manufacturing company that is looking for a skilled Night Shift Valve Technician in their Central NY facility. The Valve Technician will be responsible for completing assigned duties to ensure customer, team member, and vendor satisfaction by overseeing the maintenance, repair, and optimization of valve systems. Must be able to work overnights. Location: Syracuse, NY region Job Responsibilities: • Notify others of mechanical malfunctions to increase productivity and equipment capabilities and begin to identify areas where operators can assist in resolving concerns., • Analyze, troubleshoot, and execute repair procedures for valves and associated equipment, ensuring optimal functionality and safety standards are met., • Maintain accurate records of repairs, follow established procedures, and ensure compliance with safety regulations, including SQF certification., • Monitor and manage inventory of valve parts and kits, aligning with repair frequency and ordering supplies as necessary., • Train and support other technicians, providing guidance on valve work procedures, and occasionally assisting in training outcomes documentation., • Regularly communicate with maintenance and plant leadership, reporting on completed repairs, equipment issues, and collaborating on maintenance schedules., • Uphold safety practices, ensure adherence to quality standards post-repair, and maintain a clean working environment., • Aid and support all areas in the production facility as assigned by supervisor/lead and build competence on key areas in production such as fillers, forklifts, and production lines., • Responsible for gaining competence online circuits and learning proper hookups are made in the facility., • Work in a safe manner and report safety concerns promptly to the supervisor/lead and take corrective actions as necessary to ensure a safe environment., • Responsible for complying with GMPs, SOPs, corporate and/or plant policies, rules, and regulations., • Ensure work areas are sanitary and strictly adhere to sanitation practices., • Communicate effectively between shifts and other departments. Required Skills/Qualifications: • GED or High School diploma (Technical training or electrical/mechanical technician degree preferred)., • 3+ years’ experience within the mechanical field in manufacturing (food preferred)., • Experience in the repair and rebuild of valves., • Experience with programmable logic controllers, instruments, and controls., • Ability to report to work at scheduled times and communicate tardiness and absences with the assigned Supervisor/Manager ahead of time., • Experience working on manufacturing equipment as well as utilities (ammonia refrigeration a plus)., • Ability to move throughout all areas of the facility including but not limited to office, production, and warehouse environments. Including the outside perimeter of the building., • Ability to operate facility equipment as required in assigned area.

Eaton's ES GEIS CHD division is currently seeking a Maintenance Repair Technician (CNC) - 2nd Shift. This position is based at our Syracuse, New York facility with core hours of 2:30pm to 11:00pm. The hourly rate for this position is $34.86 per hour. What you'll do: \n • Tear down, determine extent of troubles, repair damaged electrical or mechanical mechanism or replace worn or defective parts and reassemble following standard and prescribed safety regulations.\n, • Need a basic understanding of PLC logic and machine programming (Mcode/Gcode)\n, • Adjust equipment to required specification and check to assure effective operation. \n, • Check sequence of machine cycle, determine type of machine malfunction, make all necessary repairs applying machine repair theory along with electrical theory.\n, • Perform electrical test operations. \n, • Work from complex schematic diagrams, manuals and testing procedures. \n, • Troubleshoot all defective printed circuit assembly boards. \n, • Perform similar or associated electrical or mechanical duties as directed.\n, • Detect and report all unusual cases to proper supervision. \n, • Use of judgment to comply with instructions or prescribed routines and to make decisions.\n\n Qualifications: Required (Basic) Qualifications: \n • Must have a high school diploma or equivalent from an accredited institution\n, • Journeymen or three (3) years of documented CNC repair maintenance experience in an industrial electrical/mechanical trade\n, • Experience with ladder logic circuit diagrams, industrial motor control schematics, and blueprint reading\n, • Four (4) years or more of documented CNC repair maintenance experience in an industrial electrical/mechanical trade preferred\n, • Background in machining and electrical equipment\n, • Two-year degree in electronics with mechanical experience/Military electronics experience.\n • 401K Contributions, • Medical, Dental, Vision Insurance effective Day 1, • Paid Time Off - Vacation and Holiday's, • Employee Assistance Program #IND123 #LI-LB1 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Job DescriptionValve Technician Why Byrne At Byrne, we foster a culture built on teamwork, excellence, and professionalism. Our greatest strength lies in the exceptional talent and dedication of our team members across every part of the organization. We value their contributions and ensure they’re recognized, rewarded, and compensated in ways that reflect their impact and expertise. Pay and Benefits • Salary Range – $31.00-$41.00 per hour, • Competitive bonus programs, • Medical, Dental, Vision benefits available day 1 of employment, • Supplemental benefits available on day 30 of employment, • Eligible for 401 (k) with a company match available on day 90 of employment 6750 Benedict Road W East Syracuse, NY 13057 N1 6pm-630am Job Overview The Valve Technician plays a key role in executing assigned processing tasks. This includes setting up, operating, cleaning, and troubleshooting production equipment in accordance with standard operating procedures. Key Responsibilities • Install, maintain, and repair sanitary valves including divert valves, butterfly valves, ball valves, and check valves throughout pasteurization, CIP (Clean-in-Place), and product transfer systems to ensure optimal flow control and product integrity., • Perform preventive maintenance on pneumatic and hydraulic valve actuators, control systems, and associated instrumentation while maintaining detailed maintenance logs and following manufacturer specifications., • Conduct valve calibration and testing to verify proper operation, seal integrity, and response times while ensuring compliance with food safety standards and sanitary design requirements., • Troubleshoot valve-related production issues by diagnosing mechanical failures, control system malfunctions, and flow problems to minimize downtime and maintain continuous production operations., • Execute sanitary valve installations for new equipment and process modifications while adhering to 3-A sanitary standards, FDA regulations, and company engineering specifications for dairy processing systems., • A minimum of GED or High School Diploma is required., • Technical training or electrical/mechanical technician degree, • Minimum 2-3 years’ experience within the mechanical field, • Minimum 1 year experience in the repair and rebuild of valves., • Minimum 1 year experience in processing, • Experience with programmable logic controllers, instruments, and controls Headquartered in LaFayette, Byrne is a Central New York-based dairy company with a legacy spanning over 90 years. Its operations include an extended shelf-life (ESL) and ultra-high temperature (UHT) pasteurization plant in DeWitt, as well as an ESL manufacturing facility in Cortlandville. Byrne also maintains warehouse facilities in Syracuse and East Syracuse, along with a dedicated ice cream center in Syracuse. As a recognized industry leader, Byrne continues to drive innovation at the forefront of dairy processing and product development

Job DescriptionSalary: $31.46-$34.48 Who is CenTrio? CenTrio is a fully integrated, innovative and sustainable energy services provider to a wide range of industries such as higher education & healthcare campuses, cities, and communities. It serves more with utility infrastructures serving more than 170+ million square feet of space and operations in 10 cities across the United States and growing. In each community, the company operates highly efficient and innovative utility infrastructures that produce and distribute electricity, steam, hot water and/or chilled water to customer buildings and campuses. Customers connected to these systems enjoy multiple benefits including reduced operating costs, lower emissions and unmatched reliability. CenTrio is a wholly owned subsidiary of a global Infrastructure Investment Consortium with unmatched financial wherewithal and manages a portfolio of long-life, high quality infrastructure assets with high barriers to entry that generate stable and growing cash flows. Job Summary The Operator will be a key member of the Companys Operations team, reporting directly to the Operations and Maintenance Manager. The group operates under a flat structure, and the successful candidate will have regular visibility and direct access to the Director of Operations. The successful candidate will be a critical member of the team, ensuring the successful execution of providing our customers with steam and chilled water on a 24/7/365 basis. Operators work 12-hour shifts alternating every two weeks between days and nights and include weekends. The successful candidate will be expected to work well as part of a team, be a self-starter that enjoys working in a fast-paced environment, have strong commitment to deadlines and team, is process oriented with a high sense of ownership in their work, possesses a high degree of intellectual curiosity, and has a superior knowledge of steam and chilled water systems. Core Responsibilities • The Operator will perform all duties as assigned - Operates, maintains, and troubleshoots equipment of a steam and chiller plant and the distribution systems, • Works with management and peers to Identify and scope out opportunities to maximize production, minimize operating costs and eliminate downtime, • Maintains proper documentation, including operating logs, maintenance records and safety & environmental reports, • Keeps Manager, control room and other operators and peers are fully informed of unusual plant conditions and current job progress as the job relates to facility operations when assigned on-shift and transitioning shift., • Commitment to following all applicable company and client policies, procedures and work rules, and modeling appropriate actions and behaviors, • Participates in training on operating policies and procedures, • Performs chemical tests on boilers, condensate and cooling water and adjust to designated test levels, • Regenerate softeners, • Work in confined spaces, such as boilers, vaults and work from ladders, scaffolds, catwalks, etc., • Transferring chemicals into storage tanks, • Monitors the plant control system via computer screens and equipment gauges, • Perform continuous improvements on the appearance of the plant facility including snow removal as needed., • Additional duties include, but are not necessarily limited to starting and stopping plant equipment as needed; diagnosing and correcting problems in equipment and auxiliaries; changing oil, lubricating bearings and filling station logs, receiving deliveries Working Style to Be Successful in This Role: • Highly analytical with a keen attention to detail, • Demonstrates exceptional initiative and execution skills, • Strong oral and written communication abilities, • Collaborative with excellent interpersonal skills, • Capable of developing and maintaining positive relationships internally and externally, • Adapts quickly in a dynamic, complex, and fast-paced environment, managing changing priorities effectively, • Delivers high-quality work with speed and accuracy, • Self-motivated and proactive, able to work independently with minimal supervision Professional Experience & Knowledge: • Undergraduate degree with relevant technical discipline with 1 year of experience in operating and/or maintaining of combined or simple cycle power plant or other heavy industrial energy plant or High School Diploma with 3 years plant experience, • Individuals having served in the United States Navy for a period of 4 (four) or more years as a boiler technician, machinist's mates, or engineering lab technicians will be considered eligible by the company for a Shift Operator position., • Knowledge of the purpose and function of electronic and pneumatic control panels, and ability to read and interpret charts, tables, measuring equipment, and gauges are required, • Highly analytical with great attention to detail, • Collaborative and interpersonal skills, • A process-focused individual with a passion to drive and deliver effective change, • Self-motivated and proactive, with respect to both managing workload and professional development, • Ability to work in a dynamic, complex, fast-paced environment, to adapt quickly and to manage changing priorities Physical Requirements: • Must be able to work in tight spaces and elevated positions: twisting, turning, bending, and holding arms at / above the head are all common movements; able to lift up to 50lbs., • Requires sitting at computer screens for long periods of time, • Capable of operating heavy equipment such as a forklift and variety of hand and power tools, • Must be able to clearly see and differentiate all colors, • Must be able to maintain standard threshold of hearing to safely perform job duties, • Must have good eyesight, hearing and manual dexterity, • Wear all types of PPE including hearing protection, eye protection, all types of hand protection, steel toe foot wear, head protection, wear fall-protection, half-face and full-face respirators Conditions of Employment: • Valid New York State Drivers License, • Only authorized employees are permitted to use company vehicles, this includes Industrial trucks (forklifts, scissor lifts, etc.) and electric vehicles/golf carts. To be an authorized employee, you must be at least 21 years old, hold a current valid State Drivers' license and demonstrate a clean driving record. The driver must be on an approved list for company insurance purposes. Your driving record will be screened as part of the pre-employment process and annually in December., • All certifications/licenses must be up to date, • CenTrio strives to create a culture of health and wellness. As of December 1, 2021, and consistent with applicable state law, CenTrio will decline to hire individuals who use nicotine products. (WASHINGTON, COLORDAO, MICHIGAN, and TEXAS) Why Join CenTrio? CenTrio offers a dynamic and friendly work environment, dedicated to nurturing a top-notch team culture! Additionally, CenTrio offers an array of fabulous benefits and perks. • Medical Benefits first day of hire, • Medical, dental, vision, Life & AD&D benefits, • Option of supplemental Life & AD&D benefits, • Company paid High-Deductible Healthcare Benefit Plan, • 401k plan with % match, • Training Opportunities and career progression, • Competitive salaries that reflect the value of skills and experience, • Dynamic and friendly work environment in a rapidly expanding industry with a national presence, • Remote, Hybrid, and In Office schedules available dependent on job responsibilities, • 24-hour Employee Assistance Program/Hotline, • Corporate discounts (Travel, Entertainment, Home, Auto, Apparel, Health and Wellbeing, and other various retail options) Health, Safety & Environment (HSE) CenTrio maintains a steadfast commitment to a proactive safety culture, with HSE being a collective responsibility throughout the organization. Your HSE accountability also encompasses: • Promote, ensure, and maintain a safe and healthy environment for your fellow workers and yourself so that everyone goes home injury-free, • Work in compliance with the provisions of the Occupational Health and Safety Act, Industrial Regulations, Environmental Protection Act and Regulations and HSE policies, programs, and procedures, • Responsible for identifying and reporting workplace HSE hazards and concerns to your supervisor immediately and providing solutions (if aware of any) to address these concerns as requested, • Immediate reporting of all work-related injuries/illness to your supervisor, • Adhere to various PPE requirements of the position which may include hearing protection, eye protection, hand protection, steel toe footwear, head protection, fall-protection, respirators (half-face and full-face) DISCLAIMER The preceding position description is intended to provide the general nature and level of work to be performed by employees within this classification. It is not intended to be a detailed description of the position or be interpreted as a comprehensive listing of all duties, responsibilities, and qualifications required for this position. DIVERSITY STATEMENT We know that our greatest strengths come from the people who make up our team. CenTrio is committed to the creation and nurturing of a diverse community of individuals through inclusive excellence. Diversity involves recognizing the value of differences and the inclusion of all members of the community including those that experience discrimination or under representation. This is a core value of the organization as we strive for a culturally diverse work force that reflects the multicultural nature of the nation and our world and brings unique strengths and abilities which contribute to CenTrio.

Job Description Extrusion Technicians: Rotating 12 hour shifts Job Summary: The Extrusion Technician will be responsible for the performance of automated extrusion process systems. This position will be located out of our manufacturing facility in East Syracuse, NY and will report to the Manufacturing Engineer. Applicants can expect a base compensation range of $27.00 - $34.00 per hour plus a 10% shift differential for working on second or third shift. This is the reasonable estimate for this job based on applicable circumstances at the time of posting. Pay could be more or less than the posted range as permitted by law, and commensurate with the applicant’s experience, qualifications, and geographical location. Rotating work schedule will reflect: (A) Week One : 5am – 5pm Week 1 Monday, Tuesday, Saturday and Sunday; Off Wednesday – Friday (A) Week Two : 5am – 5pm Week 2 Wednesday – Friday; Off Monday, Tuesday, Saturday and Sunday Pay is $27.00 - $34.00 depending on experience OR (B) Week One : 5am – 5pm Week 1 Wednesday – Friday; Off Monday, Tuesday, Saturday and Sunday (B)Week Two : 5am – 5pm Week 2 Monday, Tuesday, Saturday and Sunday; Off Wednesday – Friday Pay is $27.00 - $34.00 with a 10% shift differentialdepending on experience Benefits: • Temp to Hire, • Weekly Pay, • Benefits once hired on, • MIxture of days on and off, more time with family and friends You will make a difference in the following ways: -Conduct walk-throughs of the manufacturing facility and reviews performance data of the extrusion process equipment from the preceding shift. -Perform preventative and corrective maintenance on extrusion systems, process, and ancillary equipment. -Support the production floor answering equipment repair and troubleshooting requests related to extrusion process equipment within the plant. -Attend the daily Tier II meetings to review operations on the plant floor and assist the operators in the timely repair of the extrusion equipment. -Install, sets-up, and rebuild extrusion equipment. Requirements : -Education & Experience: Associate’s degree in Electrical Technology or a relevant Technical Certification combined with a minimum three (3) years of relevant technician experience. -Knowledge: Strong mechanical aptitude and proficiency with electrical hand tools and precision measuring devices -Specific Skills: Ability to troubleshoot and repair pneumatic circuits, electrical circuits, electrical machinery and human-machine interfaces. Must be able to speak , read and write English fluently. -Customers Define Our Success: Provide support to the production floor, answer equipment repair and trouble-shooting requests to eliminate machine downtime and ensure continuous production. What happens next: If you are motivated, dependable, and are looking to jump start your career please apply now with your updated resume. We will proceed to the next steps if your skills and experience look like a good fit for the position. Even if this position does not work out, your information is still in our database. That means all our recruiters will have access to your profile, expanding your opportunities even more. Staffworks is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, national origin, sex, age, disability, veteran status, sexual orientation, gender identity or any other basis protected by federal, state or local law. Apply now for consideration! APPLY TO WWW.STAFFWORKSCNY.COM