Trabajos ged en Rochester, New YorkCrear alertas

Description: Located in Hershey, PA, Milton Hershey School (MHS) is a top-notch home and school where over 2,200 pre-K through 12th grade students from disadvantaged backgrounds are provided an extraordinary, cost-free, career-focused education. This is made possible by the generosity of Milton and Catherine Hershey, who established the school in 1909 and ensured it was fully endowed. Thanks to their foresight and generosity, the school has over 12,000 graduates and continues to expand to serve more students. MHS is hiring married couples to serve as Full-time Flex Houseparents. In this unique and life-changing career, couples reside in on-campus student homes and provide care, guidance, supervision, and support for a group of approximately 8–13 students living in the home. Flex Houseparents play a vital role in creating a structured, family-like environment that fosters students’ academic, emotional, and social development so they can reach their full potential. Responsibilities include: • Providing daily supervision and mentorship, • Managing household routines and student schedules, • Administering medications and ensuring student wellness, • Driving students to activities, as well as planning and actively engaging in developmental and recreational activities with students, • Leading daily devotions and accompanying students to Sunday Chapel Benefits include: • Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more), • Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings, • Relocation assistance and paid training provided, • Paid time off provided at designated times throughout the year Qualifications: Qualifications include: • Experience working or volunteering with youth, • This is a two-person role for couples legally married for at least two years, • Both spouses must be age 27 or older, • No more than three dependent children may reside in the student home, • Commitment to a smoke-free and weapon-free campus; no alcohol permitted while on duty, • Pet limitations: only fish and one dog of approved breeds allowed, • Valid U.S. driver’s license and ability to become certified to drive student home vans, • Comfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited), • High school diploma or GED required, • Ability to lift to 50 lbs., • Demonstrated integrity and professionalism; MHS staff serve as role models for students This is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses. For consideration, both spouses must complete individual employment applications. To learn more and apply, visit ___.

Description: Located in Hershey, PA, Milton Hershey School (MHS) is a top-notch home and school where over 2,200 pre-K through 12th grade students from disadvantaged backgrounds are provided an extraordinary, cost-free, career-focused education. This is made possible by the generosity of Milton and Catherine Hershey, who established the school in 1909 and ensured it was fully endowed. Thanks to their foresight and generosity, the school has over 12,000 graduates and continues to expand to serve more students. MHS is hiring married couples to serve as Full-time Flex Houseparents. In this unique and life-changing career, couples reside in on-campus student homes and provide care, guidance, supervision, and support for a group of approximately 8–13 students living in the home. Flex Houseparents play a vital role in creating a structured, family-like environment that fosters students’ academic, emotional, and social development so they can reach their full potential. Responsibilities include: • Providing daily supervision and mentorship, • Managing household routines and student schedules, • Administering medications and ensuring student wellness, • Driving students to activities, as well as planning and actively engaging in developmental and recreational activities with students, • Leading daily devotions and accompanying students to Sunday Chapel Benefits include: • Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more), • Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings, • Relocation assistance and paid training provided, • Paid time off provided at designated times throughout the year Qualifications: Qualifications include: • Experience working or volunteering with youth, • This is a two-person role for couples legally married for at least two years, • Both spouses must be age 27 or older, • No more than three dependent children may reside in the student home, • Commitment to a smoke-free and weapon-free campus; no alcohol permitted while on duty, • Pet limitations: only fish and one dog of approved breeds allowed, • Valid U.S. driver’s license and ability to become certified to drive student home vans, • Comfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited), • High school diploma or GED required, • Ability to lift to 50 lbs., • Demonstrated integrity and professionalism; MHS staff serve as role models for students This is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses. For consideration, both spouses must complete individual employment applications. To learn more and apply, visit ___.

Description: Located in Hershey, PA, Milton Hershey School (MHS) is a top-notch home and school where over 2,200 pre-K through 12th grade students from disadvantaged backgrounds are provided an extraordinary, cost-free, career-focused education. This is made possible by the generosity of Milton and Catherine Hershey, who established the school in 1909 and ensured it was fully endowed. Thanks to their foresight and generosity, the school has over 12,000 graduates and continues to expand to serve more students. MHS is hiring married couples to serve as Full-time Flex Houseparents. In this unique and life-changing career, couples reside in on-campus student homes and provide care, guidance, supervision, and support for a group of approximately 8–13 students living in the home. Flex Houseparents play a vital role in creating a structured, family-like environment that fosters students’ academic, emotional, and social development so they can reach their full potential. Responsibilities include: • Providing daily supervision and mentorship, • Managing household routines and student schedules, • Administering medications and ensuring student wellness, • Driving students to activities, as well as planning and actively engaging in developmental and recreational activities with students, • Leading daily devotions and accompanying students to Sunday Chapel Benefits include: • Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more), • Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings, • Relocation assistance and paid training provided, • Paid time off provided at designated times throughout the year Qualifications: Qualifications include: • Experience working or volunteering with youth, • This is a two-person role for couples legally married for at least two years, • Both spouses must be age 27 or older, • No more than three dependent children may reside in the student home, • Commitment to a smoke-free and weapon-free campus; no alcohol permitted while on duty, • Pet limitations: only fish and one dog of approved breeds allowed, • Valid U.S. driver’s license and ability to become certified to drive student home vans, • Comfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited), • High school diploma or GED required, • Ability to lift to 50 lbs., • Demonstrated integrity and professionalism; MHS staff serve as role models for students This is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses. For consideration, both spouses must complete individual employment applications. To learn more and apply, visit ___.

Description: Located in Hershey, PA, Milton Hershey School (MHS) is a top-notch home and school where over 2,200 pre-K through 12th grade students from disadvantaged backgrounds are provided an extraordinary, cost-free, career-focused education. This is made possible by the generosity of Milton and Catherine Hershey, who established the school in 1909 and ensured it was fully endowed. Thanks to their foresight and generosity, the school has over 12,000 graduates and continues to expand to serve more students. MHS is hiring married couples to serve as Full-time Flex Houseparents. In this unique and life-changing career, couples reside in on-campus student homes and provide care, guidance, supervision, and support for a group of approximately 8–13 students living in the home. Flex Houseparents play a vital role in creating a structured, family-like environment that fosters students’ academic, emotional, and social development so they can reach their full potential. Responsibilities include: • Providing daily supervision and mentorship, • Managing household routines and student schedules, • Administering medications and ensuring student wellness, • Driving students to activities, as well as planning and actively engaging in developmental and recreational activities with students, • Leading daily devotions and accompanying students to Sunday Chapel Benefits include: • Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more), • Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings, • Relocation assistance and paid training provided, • Paid time off provided at designated times throughout the year Qualifications: Qualifications include: • Experience working or volunteering with youth, • This is a two-person role for couples legally married for at least two years, • Both spouses must be age 27 or older, • No more than three dependent children may reside in the student home, • Commitment to a smoke-free and weapon-free campus; no alcohol permitted while on duty, • Pet limitations: only fish and one dog of approved breeds allowed, • Valid U.S. driver’s license and ability to become certified to drive student home vans, • Comfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited), • High school diploma or GED required, • Ability to lift to 50 lbs., • Demonstrated integrity and professionalism; MHS staff serve as role models for students This is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses. For consideration, both spouses must complete individual employment applications. To learn more and apply, visit ___.

Description: Located in Hershey, PA, Milton Hershey School (MHS) is a top-notch home and school where over 2,200 pre-K through 12th grade students from disadvantaged backgrounds are provided an extraordinary, cost-free, career-focused education. This is made possible by the generosity of Milton and Catherine Hershey, who established the school in 1909 and ensured it was fully endowed. Thanks to their foresight and generosity, the school has over 12,000 graduates and continues to expand to serve more students. MHS is hiring married couples to serve as Full-time Flex Houseparents. In this unique and life-changing career, couples reside in on-campus student homes and provide care, guidance, supervision, and support for a group of approximately 8–13 students living in the home. Flex Houseparents play a vital role in creating a structured, family-like environment that fosters students’ academic, emotional, and social development so they can reach their full potential. Responsibilities include: • Providing daily supervision and mentorship, • Managing household routines and student schedules, • Administering medications and ensuring student wellness, • Driving students to activities, as well as planning and actively engaging in developmental and recreational activities with students, • Leading daily devotions and accompanying students to Sunday Chapel Benefits include: • Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more), • Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings, • Relocation assistance and paid training provided, • Paid time off provided at designated times throughout the year Qualifications: Qualifications include: • Experience working or volunteering with youth, • This is a two-person role for couples legally married for at least two years, • Both spouses must be age 27 or older, • No more than three dependent children may reside in the student home, • Commitment to a smoke-free and weapon-free campus; no alcohol permitted while on duty, • Pet limitations: only fish and one dog of approved breeds allowed, • Valid U.S. driver’s license and ability to become certified to drive student home vans, • Comfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited), • High school diploma or GED required, • Ability to lift to 50 lbs., • Demonstrated integrity and professionalism; MHS staff serve as role models for students This is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses. For consideration, both spouses must complete individual employment applications. To learn more and apply, visit ___.

Are you a high energy, passionate retail leader who is looking for the next step in their career? Are you someone who loves to help others and work as part of a team? Do you thrive in fast-paced environments and have previous experience in retail, food service or restaurant management? Do you like discounts on gas and free coffee? Then you may be the perfect addition to our team! What We Offer: • Competitive Wages, • Professional Structured Training program, • Work today, get paid tomorrow through our earned wage access program*, • Paid Time Off, • Medical/Health/Dental Coverage, • 401K with Company Match, • Team Member Discounts, • Tuition Reimbursement, • Employee Assistance Program, • Health Savings Account, • Company Spirit Days Training Process: During official training weeks, Managers In Training work alongside Training Managers, gaining insight and best practices for managing a convenience store location. During supervisory weeks (in between training weeks) Managers In Training work a variety of shifts, alongside team members, putting their leadership training to practice. After training, Managers In Training become part of our bench leadership team, helping to fill in during absences until assigned to their own store. Looking for growth opportunities? Our parent company, EG America, operates nearly 1700 locations across the United State, so there are always opportunities for you to move up the ladder! What you’ll do: • Greet Guests with a warm welcome and a smile! After all, we are known for delivering exceptional Customer Service!, • Assist Store Manager with building and developing a strong store team: training, scheduling, and coaching team members. Act as a leader within the team by setting clear and measurable goals, holding self and others accountable, and communicating frequently and effectively., • Monitor product levels on the sales floor, rotating stock and keeping product levels full. Our guests’ count on us to be 100% in-stock at all times., • Oversee quality control, merchandising, & food safety programs in locations that offer hot food., • We love to keep a clean store. We work as a team to maintain the overall appearance and cleanliness of both interior and exterior of the store. Ensuring that the coffee station is clean and stocked; the food service area is spotless and the bathrooms are sparkling clean! You will help by delegating and completing these tasks as necessary., • Operate the cash register in an efficient manner At EG America, it’s important that our employees reflect the world we live in and the communities we serve. We celebrate our differences, so your unique background and skillset could bring a wonderful new perspective to our team. If you have a passion for delivering exceptional Customer Service and have a strong retail management background, then we'd love to meet you. The rest can be taught! Minimum Education: High School or GED Preferred Education: Minimum Experience: 1 year retail or food experience Preferred Experience: 1 year in retail, guest service or restaurant, in a leadership role Preferred Licenses/Certifications and Skills: ServSafe /Food Safety certification a plus but not mandatory Soft Skills: • Comfortable talking and interacting with guests and team members, • High energy, • Ability to move from one activity to another quickly, • Team oriented; willing to give extra effort to help others Hours & Conditions: Full-time – 40 regular hours maximum with 5 hours overtime required Travel: 5%. Ability to deliver deposits to the bank independently (where applicable) and have own vehicle to do so. Physical Requirements: Ability to maneuver and regularly lift and or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 40 pounds. Ability to stand/walk 8 hours a day; reach overhead, bend, squat, twist, reach, grasp and grip and work in cooler (cold temperatures). The noise level in the work environment is usually moderate. Other: Specialized attire required in food establishments (hats or visors, gloves etc. provided)

This position is essential to the success of our retail stores. Customer Service Specialists work closely with wholesale and retail customers to determine their needs, answer their questions about Sherwin-Williams products, and recommend the right solutions. Customer Service Specialists are also expected to promptly resolve any customer concerns and ensure maximum client satisfaction as well as stay up-to-date with product features and maintain the high quality and visual standards of the products and store. Customer Service Specialists are tasked with achieving excellent customer service, while consistently meeting the store’s sales goals. Job duties involve contact with customers, which may include minors; and access to cash and other payment methods, electronic equipment, personal information, store merchandise and other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company’s customers, staff, employees, vendors, contractors, and the general public. The individual selected for this role will be expected to work at Store #1569, located at: 3240 Chili Avenue, Rochester, NY 14624. This position is eligible for health benefits, such as medical, dental and vision coverage, Flexible Spending Accounts (FSAs), disability coverage, security, retirement and saving benefits, and more. Additional benefits include a generous time away from work package, including personal leave, paid parental leave, medical leave, vacation, holidays, among other benefits. For more information about our benefits, visit At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible What is the Process to get Started? Step 1 – Online Application Find the role(s) that interest you on our Careers page: ___ Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 – Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You’ll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 – In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute—it matters to us. A general description of benefits offered can be found at ___. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. • Ensure high levels of customer satisfaction through excellent sales service, • Assist customers in person and over the phone by determining needs and presenting appropriate products and services, • Build productive trust relationships with wholesale and retail customers, • Process sales transactions accurately and consistently with policies and procedures, • Follow and achieve sales goals on a monthly, quarterly, and yearly basis, • Maintain precise work order files and formulas, • Pull appropriate products from the sales floor or warehouse, • Tint and mix products, as needed, to customer specifications, • Stock shelves and set up displays, • Clean store equipment, • Load/unload delivery trucks, • Assist in making deliveries, as needed, • Maintain in-stock and presentable condition assigned areas, • Remain knowledgeable on products offered and discuss available options, • Comply with inventory control procedures, • Suggest ways to improve sales Minimum Requirements:, • Must be at least eighteen (18) years of age, • Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future, • Must have a valid, unrestricted Driver’s License, • Must be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasion, • Must be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodation, • If internal to Sherwin-Williams, you must have received at least a “meets expectations” (3) rating on your most recent performance appraisal, • If internal to Sherwin-Williams, you must have completed all HR Cloud eLearning courses required for your current position Preferred Qualifications:, • Have at least a High School diploma or GED, • Have at least one (1) year of experience working in a delivery, retail, or customer service position, • Have previous work experience selling paint and paint-related products, • Have previous work experience operating tinting and mixing equipment, • Ability to read, write, comprehend, and communicate in more than one language, • Ability to read, write, comprehend, and communicate in Spanish

Job Description Position:Metal Finisher Reports to: Plant Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: Grinds and smooths surfaces of items, while also possessing the ability to read and comprehend simple instructions, short correspondence and memos. Ability to write simple correspondence. Minimum Qualifications: • High school diploma or general education degree (GED), • Minimum one year or more experience, • Fluent in verbal and written English Specific Duties: • Examines and feels surface of work piece for defects., • Move grinder over surface of work piece to remove scratches and imperfections, • Polish ground areas with finer abrasive to produce smooth, unmarred surface, • Replace worn abrasive disks, wheels, and belts, • Selects grade of abrasive belt, wheel, or disk according to specifications, • Ability to operate material handling equipment Physical Demands: • Must be able to lift up to 50 lbs regularly, • Requires frequent bending, stooping, squatting, pushing and pulling of parts and part containers, • May be required to stand for long periods of time, • May involve some repetitive motions, • Due to the open environment of the warehouse, must be able to work in various weather and temperature conditions to include extreme heat, humidity and cold This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Join our team, where your expertise will drive cutting-edge solutions, address complex technical challenges, and uphold the highest standards of precision and safety. We are seeking a Precision Assembler to join our Operations team in Rochester, NY. Bring your passion and commitment to Navitar, where we are curious, collaborative, persistent, and confident, where safety and quality guide every step of our journey. Grow with us as we solve complex challenges, inspire confidence, and drive excellence in manufacturing. KEY RESPONSIBILITIES: • Perform functional and optical testing of interferometers using precision metrology tools., • Follow detailed manufacturing procedures, work instructions, and quality standards., • Maintain cleanroom protocols and ensure contamination control during all assembly processes., • Collaborate with engineering to support process development, validation, and continuous improvement., • Document work performed with extreme attention to detail., • Maintain traceability of components and assemblies., • Support root cause analysis and corrective actions for production issues., • Maintain required training certifications and adhere to safety and quality. REQUIRED SKILLS AND COMPETENCIES: • High School Diploma or GED, • 3-5 years of hands-on production manufacturing/operations, • Solid mathematical aptitude, • Ability to read and interpret technical documentation, including Bill of Material (BOM), schematics and optical layouts, • Excellent manual dexterity and attention to detail to handle delicate optical components, • Collaborative team player with a focus on problem-solving, • Ability to work independently and to be flexible/adaptable with shifting priorities, • Organized, conscientious and focused, • Basic computer skills for data entry, documentation, and communication, • Capable to lift up to 20 lbs. and standing for extended periods of time, • Driven to achieve with a commitment to quality with a safety-first mindset PREFERRED SKILLS AND EXPERIENCE: • Experience in manufacturing precision optical or laser-based instruments, • Experience working in a Clean Room environment (ISO Class 7 or better preferred), • Knowledge of interferometry principles, optical testing, and troubleshooting Are you ready to expand the boundaries of possibility, simplify the complex, and embody the values that define our success? We welcome your unique perspective and invite you to join us! We offer competitive compensation, benefits, retirement (401k) and paid time off programs. Compensation and position level will be set based on experience. *Due to the nature of Navitar programs and products, applicants must have the legal right to work in the US and additionally must be legally authorized to access export-controlled information and source code. Compensation Employee Type: Hourly Salary Minimum: $40,000 Salary Maximum: $65,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Rochester

Job DescriptionDescription: General Job Summary: In addition to performing all phases of the TIG weld function, sets-up machinery, tools and parts for job completion. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Understands and follows all applicable safety policies and procedures., • Refers to production Manufacturing Process Control Document (MPCD) for job specifics., • Sets up and runs jobs as required., • Resolves problems with job as required., • Assists in the resolution of production, quality, and engineering issues., • Ensures machines are maintained per safety and quality standards., • Assists with other duties as assigned by supervisor/ manager. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED); One year certificate from college or technical school preferred or equivalent combination of education and experience. Experience 2-3 years related experience or training Computer Skills: None Other Requirements: Understanding and ability to use quality inspection equipment (calipers, height stand, protractor). Strong problem-solving skills. MIG/TIG Welding certification preferred. Ability to wear a respirator, as required. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasping and twisting; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs.. Work Environment: The work environment characteristics described here are representative of those an Associate encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the Associate is regularly exposed to extreme heat; extreme cold; wet and/or humid conditions. While performing the duties of this job the noise level in the work environment is usually loud.

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Welder Your Role: The welder is responsible for welding various sheet metal parts to both commercial, AWS and ASME standards via customer drawings. The welder will use the following processes GTAW, GMAW-S and GMAW-P on common base metals such as, but not limited to Aluminum, Stainless Steel and Cold Rolled Steel. Reports To: Welding Supervisor Essential Functions: • Weld components using various techniques, • Follow and comply with all safety and work rules and regulations, • Proficiency with metal fabrication tools that are common with the Welding industry., • Maintain departmental housekeeping standards, • Good organizational, communication and problem-solving skills, • Proficiently read and interpret blueprints and technical drawings, • Perform quality checks to ensure that fabricated metal components meet the required standards and specifications., • Collaborate and work with team members to complete projects on time and according to customer requirements., • Rig and lift heavy objects safely, • 3+ years MIG/TIG welding experience and/or technical school or equivalent combination., • Highschool, GED or equivalent is required, • Familiarity with AWS standards preferred, • Proven experience as a fabricator/welder or similar role, • Understanding of welding symbols, • Competitive Total Rewards, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Compassion: We care for our talented and loyal PEKO family., • Safety: A commitment to providing a safe, clean, and positive workplace., • Integrity: We believe in transparency, honesty, and respect for all stakeholders., • Agility: We are dedicated to a financially prudent organization., • Endurance: Fostering the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR XZOCxYPEr7

Job DescriptionJob Overview: We are seeking a highly motivated and skilled MIG/TIG welder to join our team! This individual will be performing all phases of the TIG weld function, sets-up machinery, tools and parts for job completion. Key Responsibilities: • Understands and follows all applicable safety policies and procedures., • Refers to production Manufacturing Process Control Document (MPCD) for job specifics., • Sets up and runs jobs as required., • Resolves problems with job as required., • Assists in the resolution of production, quality, and engineering issues., • Ensures machines are maintained per safety and quality standards., • Assists with other duties as assigned by supervisor/ manager.Qualifications:, • 2-3 years related experience or training., • High school diploma or general education degree (GED)., • One year certificate from college or technical school preferred or equivalent combination of education and experience.Hours:, • Full Time - 40 hours per week, • Monday - Friday, • 1st and 2nd shift work opportunitiesBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Join our team, where your expertise will drive cutting-edge solutions, address complex technical challenges, and uphold the highest standards of precision and safety. We are seeking a Precision Assembler to join our Operations team in Rochester, NY. Bring your passion and commitment to Navitar, where we are curious, collaborative, persistent, and confident, where safety and quality guide every step of our journey. Grow with us as we solve complex challenges, inspire confidence, and drive excellence in manufacturing. KEY RESPONSIBILITIES: • Perform functional and optical testing of interferometers using precision metrology tools., • Follow detailed manufacturing procedures, work instructions, and quality standards., • Maintain cleanroom protocols and ensure contamination control during all assembly processes., • Collaborate with engineering to support process development, validation, and continuous improvement., • Document work performed with extreme attention to detail., • Maintain traceability of components and assemblies., • Support root cause analysis and corrective actions for production issues., • Maintain required training certifications and adhere to safety and quality. REQUIRED SKILLS AND COMPETENCIES: • High School Diploma or GED, • 3-5 years of hands-on production manufacturing/operations, • Solid mathematical aptitude, • Ability to read and interpret technical documentation, including Bill of Material (BOM), schematics and optical layouts, • Excellent manual dexterity and attention to detail to handle delicate optical components, • Collaborative team player with a focus on problem-solving, • Ability to work independently and to be flexible/adaptable with shifting priorities, • Organized, conscientious and focused, • Basic computer skills for data entry, documentation, and communication, • Capable to lift up to 20 lbs. and standing for extended periods of time, • Driven to achieve with a commitment to quality with a safety-first mindset PREFERRED SKILLS AND EXPERIENCE: • Experience in manufacturing precision optical or laser-based instruments, • Experience working in a Clean Room environment (ISO Class 7 or better preferred), • Knowledge of interferometry principles, optical testing, and troubleshooting Are you ready to expand the boundaries of possibility, simplify the complex, and embody the values that define our success? We welcome your unique perspective and invite you to join us! We offer competitive compensation, benefits, retirement (401k) and paid time off programs. Compensation and position level will be set based on experience. *Due to the nature of Navitar programs and products, applicants must have the legal right to work in the US and additionally must be legally authorized to access export-controlled information and source code. Compensation Employee Type: Hourly Salary Minimum: $40,000 Salary Maximum: $65,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Rochester

Overview: Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. The Route Service Delivery Driver’s primary responsibilities are to provide premium customer service to residential, commercial, and retail customers, accelerate growth through upselling, manage account information, and work safely. This role is highly interactive and requires the ability to safely operate a Commercial Motor Vehicle (CMV). Reporting Location: Rochester, NY Compensation: $61,160 / year & customer tips Schedule: Monday – Friday (Saturdays dependent on business needs) Start Time: Between 6 am - 7 am until workload completed Benefits: Medical, prescription, dental, vision, life, and disability insurance, 401(k) with match, company discounts, paid vacation, and much more! Responsibilities: Skills Required: · Safety Focus • Operate a commercial vehicle in a safe and responsible manner, follow defined safe work practices, and complete DOT required documentation on a daily basis, • Adhere to our safety policies which include the prohibited use of electronic devices while driving and reporting any on-the-job incidents or changes in driving status · Service Orientation • Be courteous, outgoing and always maintain a professional image, • Meet each customer’s individual preference by delivering the correct products to the right location during their scheduled day and timeframe, • Maintain necessary delivery information on all accounts including cash and receipts, • Find opportunities to maximize efficiencies and bring actionable solutions to leadership, • Act as a team player by supporting the team with decisions and helping others when needed, • Provide professional water dispenser cleaning services to customers while adhering to a strict quality process · Selling Skills • Adhere to pricing and promotion guidelines set forth by Primo Brands · High School Diploma, GED, or equivalent work experience · Ability to secure and/or maintain a CDL Class B with airbrake endorsement (for applicable CDL positions) · Primo Brands is a certified CDL provider and can assist you with obtaining your Class B CDL where available. · Service-oriented with strong face-to-face sales skills · Ability to work independently, efficiently, and in different types of weather · Ability to effectively interact with customers in a variety of settings · Ability to lift and carry an average of 250+ units per day, each weighing up to 45 lbs., using product handling tools as appropriate, with or without a reasonable accommodation · Ability to climb in and out of a commercial vehicle on average 40-55 times per day · Ability to work an average 45-hour week or more, including variable start/end times · Ability to alternately sit, stand, push, pull and walk all day, with or without a reasonable accommodation · Must have the ability to obtain a DOT medical card for the purpose of working for Primo Brands · Must possess a clean driving record, which means: in the last 3 years, that you’ve only had 1 license, no driving-related suspension, revocation or cancellation, no disqualifying offenses, no more than 2 moving violations and no reckless driving incidents and in the last 3 years, no major driving offenses including DUI/DWI, refusal to test, leaving the scene, driving a commercial vehicle without a CDL, or at-fault fatal accident · Must be 21 years of age or older (DOT requirement) Primo Brands’ established portfolio includes billion-dollar brands Poland Spring® and Pure Life®, premium brands like Saratoga® and Mountain Valley®, regional leaders such as Arrowhead®, Deer Park®, Ice Mountain® Ozarka®, and Zephyrhills®, purified brands, Primo Water® and Sparkletts®, and flavored and enhanced brands like Splash® and AC+ION®. Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. As a trusted leader in systems integration and alarm monitoring, we bring the Securitas Technology Difference to life— delivering a comprehensive suite of video surveillance, access control, intrusion detection, fire safety, and integrated security solutions. As we continue to experience rapid growth in our Electronic Security division, we are seeking an Account Executive to drive new business development in our Core Commercial division. This role focuses on lead generation, relationship building, and presenting our commercial electronic security products and services to prospective clients. Job Responsibilities: • Manage a defined territory using CRM tools, skilled in cold calling, networking, lead generation, and negotiation., • Demonstrate ability to develop and implement comprehensive service/account outsourcing strategies, • Identify and pursue new business opportunities within the core commercial market segment., • Prepare and present tailored proposals and solutions based on client needs and industry trends., • Collaborate with internal specialists to design and deliver custom solutions for complex client needs., • Participate in networking events, trade shows, and industry forums to build brand presence and identify prospects., • Conduct a minimum of 10 in-person client meetings per week within the assigned territory to foster relationships, drive engagement and new business., • High School diploma or GED required; Bachelor’s degree preferred, • At least 2 years of experience in B2B sales with a consultative approach., • Minimum 2 years of experience attaining or exceeding high sales quotas in comparable accounts and/or markets, • Proficient in leveraging Office Suite and CRM platforms to streamline workflows, increase productivity, and enhance client interactions., • Travel is required across assigned geographic areas, • Highly organized, detail-oriented, and an effective communicator, • Background in electronic security sales is strongly preferred, • Base salary plus competitive commission on product and recurring revenue sales, • Monthly auto allowance, • Paid company training and development, • Medical, Dental, Vision, Life, and Critical Illness Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Tuition Reimbursement, • Exceptional career advancement opportunities, • Exclusive employee discounts on travel, electronics, and more We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our clients and the communities we service.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. As a trusted leader in systems integration and alarm monitoring, we bring the Securitas Technology Difference to life— delivering a comprehensive suite of video surveillance, access control, intrusion detection, fire safety, and integrated security solutions. As we continue to experience rapid growth in our Electronic Security division, we are seeking an Account Executive to drive new business development in our Core Commercial division. This role focuses on lead generation, relationship building, and presenting our commercial electronic security products and services to prospective clients. Job Responsibilities: • Manage a defined territory using CRM tools, skilled in cold calling, networking, lead generation, and negotiation., • Demonstrate ability to develop and implement comprehensive service/account outsourcing strategies, • Identify and pursue new business opportunities within the core commercial market segment., • Prepare and present tailored proposals and solutions based on client needs and industry trends., • Collaborate with internal specialists to design and deliver custom solutions for complex client needs., • Participate in networking events, trade shows, and industry forums to build brand presence and identify prospects., • Conduct a minimum of 10 in-person client meetings per week within the assigned territory to foster relationships, drive engagement and new business., • High School diploma or GED required; Bachelor’s degree preferred, • At least 2 years of experience in B2B sales with a consultative approach., • Minimum 2 years of experience attaining or exceeding high sales quotas in comparable accounts and/or markets, • Proficient in leveraging Office Suite and CRM platforms to streamline workflows, increase productivity, and enhance client interactions., • Travel is required across assigned geographic areas, • Highly organized, detail-oriented, and an effective communicator, • Background in electronic security sales is strongly preferred, • Base salary plus competitive commission on product and recurring revenue sales, • Monthly auto allowance, • Paid company training and development, • Medical, Dental, Vision, Life, and Critical Illness Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Tuition Reimbursement, • Exceptional career advancement opportunities, • Exclusive employee discounts on travel, electronics, and more We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our clients and the communities we service.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. As a trusted leader in systems integration and alarm monitoring, we bring the Securitas Technology Difference to life— delivering a comprehensive suite of video surveillance, access control, intrusion detection, fire safety, and integrated security solutions. As we continue to experience rapid growth in our Electronic Security division, we are seeking an Account Executive to drive new business development in our Core Commercial division. This role focuses on lead generation, relationship building, and presenting our commercial electronic security products and services to prospective clients. Job Responsibilities: • Manage a defined territory using CRM tools, skilled in cold calling, networking, lead generation, and negotiation., • Demonstrate ability to develop and implement comprehensive service/account outsourcing strategies, • Identify and pursue new business opportunities within the core commercial market segment., • Prepare and present tailored proposals and solutions based on client needs and industry trends., • Collaborate with internal specialists to design and deliver custom solutions for complex client needs., • Participate in networking events, trade shows, and industry forums to build brand presence and identify prospects., • Conduct a minimum of 10 in-person client meetings per week within the assigned territory to foster relationships, drive engagement and new business., • High School diploma or GED required; Bachelor’s degree preferred, • At least 2 years of experience in B2B sales with a consultative approach., • Minimum 2 years of experience attaining or exceeding high sales quotas in comparable accounts and/or markets, • Proficient in leveraging Office Suite and CRM platforms to streamline workflows, increase productivity, and enhance client interactions., • Travel is required across assigned geographic areas, • Highly organized, detail-oriented, and an effective communicator, • Background in electronic security sales is strongly preferred, • Base salary plus competitive commission on product and recurring revenue sales, • Monthly auto allowance, • Paid company training and development, • Medical, Dental, Vision, Life, and Critical Illness Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Tuition Reimbursement, • Exceptional career advancement opportunities, • Exclusive employee discounts on travel, electronics, and more We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our clients and the communities we service.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. As a trusted leader in systems integration and alarm monitoring, we bring the Securitas Technology Difference to life— delivering a comprehensive suite of video surveillance, access control, intrusion detection, fire safety, and integrated security solutions. As we continue to experience rapid growth in our Electronic Security division, we are seeking an Account Executive to drive new business development in our Core Commercial division. This role focuses on lead generation, relationship building, and presenting our commercial electronic security products and services to prospective clients. Job Responsibilities: • Manage a defined territory using CRM tools, skilled in cold calling, networking, lead generation, and negotiation., • Demonstrate ability to develop and implement comprehensive service/account outsourcing strategies, • Identify and pursue new business opportunities within the core commercial market segment., • Prepare and present tailored proposals and solutions based on client needs and industry trends., • Collaborate with internal specialists to design and deliver custom solutions for complex client needs., • Participate in networking events, trade shows, and industry forums to build brand presence and identify prospects., • Conduct a minimum of 10 in-person client meetings per week within the assigned territory to foster relationships, drive engagement and new business., • High School diploma or GED required; Bachelor’s degree preferred, • At least 2 years of experience in B2B sales with a consultative approach., • Minimum 2 years of experience attaining or exceeding high sales quotas in comparable accounts and/or markets, • Proficient in leveraging Office Suite and CRM platforms to streamline workflows, increase productivity, and enhance client interactions., • Travel is required across assigned geographic areas, • Highly organized, detail-oriented, and an effective communicator, • Background in electronic security sales is strongly preferred, • Base salary plus competitive commission on product and recurring revenue sales, • Monthly auto allowance, • Paid company training and development, • Medical, Dental, Vision, Life, and Critical Illness Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Tuition Reimbursement, • Exceptional career advancement opportunities, • Exclusive employee discounts on travel, electronics, and more We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our clients and the communities we service.

Join our team, where your expertise will drive cutting-edge solutions, address complex technical challenges, and uphold the highest standards of precision and safety. We are seeking a Precision Assembler to join our Operations team in Rochester, NY. Bring your passion and commitment to Navitar, where we are curious, collaborative, persistent, and confident, where safety and quality guide every step of our journey. Grow with us as we solve complex challenges, inspire confidence, and drive excellence in manufacturing. KEY RESPONSIBILITIES: • Perform functional and optical testing of interferometers using precision metrology tools., • Follow detailed manufacturing procedures, work instructions, and quality standards., • Maintain cleanroom protocols and ensure contamination control during all assembly processes., • Collaborate with engineering to support process development, validation, and continuous improvement., • Document work performed with extreme attention to detail., • Maintain traceability of components and assemblies., • Support root cause analysis and corrective actions for production issues., • Maintain required training certifications and adhere to safety and quality. REQUIRED SKILLS AND COMPETENCIES: • High School Diploma or GED, • 3-5 years of hands-on production manufacturing/operations, • Solid mathematical aptitude, • Ability to read and interpret technical documentation, including Bill of Material (BOM), schematics and optical layouts, • Excellent manual dexterity and attention to detail to handle delicate optical components, • Collaborative team player with a focus on problem-solving, • Ability to work independently and to be flexible/adaptable with shifting priorities, • Organized, conscientious and focused, • Basic computer skills for data entry, documentation, and communication, • Capable to lift up to 20 lbs. and standing for extended periods of time, • Driven to achieve with a commitment to quality with a safety-first mindset PREFERRED SKILLS AND EXPERIENCE: • Experience in manufacturing precision optical or laser-based instruments, • Experience working in a Clean Room environment (ISO Class 7 or better preferred), • Knowledge of interferometry principles, optical testing, and troubleshooting Are you ready to expand the boundaries of possibility, simplify the complex, and embody the values that define our success? We welcome your unique perspective and invite you to join us! We offer competitive compensation, benefits, retirement (401k) and paid time off programs. Compensation and position level will be set based on experience. *Due to the nature of Navitar programs and products, applicants must have the legal right to work in the US and additionally must be legally authorized to access export-controlled information and source code. Compensation Employee Type: Hourly Salary Minimum: $40,000 Salary Maximum: $65,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Rochester

Job Description As a Truck Driver in the Army National Guard, you are the backbone of military support. By transporting cargo and supplies, you’ll play an integral role in keeping the Guard moving forward. In this role, you will operate all wheeled vehicles and equipment over various terrain and roadways; manage load, unload, and safety of personnel being transported; employ defense techniques; identify, correct, or report vehicle deficiencies; and prepare vehicles for movement/shipment by air, rail, or vessel. Job Duties • Oversee and check proper loading and unloading of cargo on vehicles and trailers • Employ convoy defense techniques Helpful Skills • Experience in driver education • Interest in driving and mechanics Through your training, you will develop the skills and experience to enjoy a civilian career with trucking, moving, or bus companies as a tractor, trailer, heavy truck, or bus driver. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for a Truck Driver consists of 10 weeks of Basic Training, where you'll learn basic Soldiering skills, and seven weeks of Advanced Individual Training (AIT), which includes practice in driving several types of military vehicles. Part of this time is spent in the classroom and part in the field. Benefits/Requirements Benefits Paid training A monthly paycheck Montgomery GI Bill Federal and State tuition assistance Retirement benefits for part-time service Low-cost life insurance (up to $400,000 in coverage) 401(k)-type savings plan Student Loan Repayment Program (up to $50,000, for existing loans) Health care benefits available VA home loans Bonuses, if applicable Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements Military enlistment in the Army National Guard Must be at least a junior in high school, or have a high school diploma or a GED certificate Must be between the ages of 17 and 35 Must be able to pass a physical exam and meet legal and moral standards Must meet citizenship requirements (see NATIONALGUARD.com for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Email me jobs like this

Job Description CMM PROGRAMMER Advantech Industries Inc. is a contract manufacturer providing sheet metal and precision CNC machined parts. Eligible candidates must have a High School Diploma/GED and 3 years’ experience. Under the supervision of the QC Manager, the CMM Programmer is responsible for setting up and executing new CMM Programs. ESSENTIAL FUNCTIONS: 1st Piece Inspections KNOWLEDGE, SKILLS, AND ABILITIES: • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes. • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating. • Ability to understand and carry out oral and written directives., • Ability to read and interpret blueprints., • Solid computer, organizational and problem-solving skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible, • Maintains organizational files and records., • Ability to operate machines and use tools such as: coordinate measuring machine (CMM), FabriVision, height gage, comparator and profilometer. JOB BENEFITS: • Vacation, • Paid Sick Leave, • Holidays, • Health, • Dental, • Vision, • Life Insurance, • 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $28.00 - $33.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment (39.75 hours per week)

Job Description We are seeking experienced Visual Inspectors to perform 100% visual inspection under a microscope on small, precision-machined metal components used in aerospace and defense applications. This is a focused, detail-oriented role—your primary responsibility is to identify cosmetic and surface defects and accurately document pass/fail results. What You’ll Do: • Perform microscope inspection of CNC-machined Aerospace parts per work instructions, samples, and acceptance criteria., • Identify and segregate nonconforming product (e.g., nicks, burrs, scratches, dents, tool marks, FOD, coating/plating blemishes)., • Record and document inspection results (pass/fail, defect codes/notes) in excel logs and ERP system., • Tag and escalate defects to the Quality Lead/Inspector for disposition., • Maintain a clean, organized, FOD-controlled workstation; handle delicate parts safely., • Meet daily throughput and accuracy targets while following AS9100/ISO 9001 procedures and EHS guidelines., • Utilize and care for inspection tools (microscopes, optical comparators, calipers, micrometers, height gages, Radius gages, chamfer/countersink gage, bore gage, thread pitch gage (for simple confirmation checks) for visual inspections. Requirements What You’ll Bring: • 3+ years of prior experience with Microscopes, for visual inspections in precision manufacturing environments (aerospace/defense, medical device, optics, or similar), required., • Exceptional attention to detail, steady hands, and comfort with repetitive, precision work., • Ability to read and follow written work instructions with GD&T and basic drawings/visual standards., • Basic computer skills for entering inspection results., • Physical ability to sit/stand for extended periods, use hands to handle small parts, and maintain visual focus under magnification., • Must know how to use inspection and metrology equipment & tools; microscopes, calipers, micrometers, gage blocks, stage micrometers, optical comparators, height gages, Radius gages, chamfer/countersink gage, bore gage, thread pitch gage (for simple confirmation checks) to conduct visual inspections., • High school diploma/GED required., • Prior experience with MS Office Suite Software, excel, and ERP systems, preferably Epicor., • Willingness to work assigned shift and overtime as needed.Company DescriptionWe’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.We’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.

Job Description As a Light-Wheel Vehicle Mechanic for the Army National Guard you’ll ensure that anything that moves on wheels is ready to hit the road. In this role, you will primarily be responsible for supervising and performing maintenance and recovery operations on wheeled vehicles in the field and in the shop. Your duties will include inspecting, servicing, maintaining, repairing, testing, adjusting, and replacing of systems and components; performing recovery operations, and servicing electrical systems; including wiring harness and charging systems. Job Duties • Maintain wheeled vehicles associated trailers and material handling equipment systems, • Service automotive electrical systems, including wiring harness, and starting and charging systems Helpful Skills • Interest in troubleshooting and repairing mechanical problems, • Interest in automotive engines and how they work Through your training, you will develop the skills and experience to enjoy a civilian career with service stations, auto dealers, farm equipment companies, and state highway agencies. You’ll be able to pursue a career as a mechanic who works on carburetors, transmissions, radiators, construction equipment, or endless track vehicles. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training requires 10 weeks of Basic Training, where you'll learn basic Soldiering skills, and 13 weeks of Advanced Individual Training (AIT). Part of this time is spent in the classroom and part in the field. Benefits/Requirements Benefits • Paid training, • A monthly paycheck, • Montgomery GI Bill, • Federal and State tuition assistance, • Retirement benefits for part-time service, • Low-cost life insurance (up to $400,000 in coverage), • 401(k)-type savings plan, • Student Loan Repayment Program (up to $50,000, for existing loans), • Health care benefits available, • VA home loans, • Bonuses, if applicable, • Military enlistment in the Army National Guard, • Must be at least a junior in high school, or have a high school diploma or a GED certificate, • Must be between the ages of 17 and 35, • Must be able to pass a physical exam and meet legal and moral standards, • Must meet citizenship requirements (see NATIONALGUARD.com for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Email me jobs like this

Job title: Complaints Coordinator Job location: New York, NY 10004 Shift: Hybrid 9-5 Date Range: 03/30/2026 - 05/23/2026, Possible Extension Pay: $19- $21/hr without benefits Education: High School Diploma/ GED Skills: Assist Complaints Team leader with MACESS documentation inquiries/complaints. Assist specialists with escalated issues (transportation requests, specialty appointments). Support management with special projects (PCP monthly projects, MIS assignments, PCP error reports). Record and respond to customer contacts and update the tracking system with follow-up and closure. Provide member orientations (on-site and telephone). Process and resolve complaints and update information in the system. Assist with PCP selection/assignment and member demographic updates. Provide benefit/service information to members, prospective members, and providers. Perform retention efforts, handle Medicare overflow calls, and support outreach projects. Handle roster, disenrollment, provider, and claim billing inquiries. Schedule marketing appointments for prospective enrollees. Skills: Customer Focus, Functional/Technical Skills, Written/Oral Communication, Integrity and Trust. 1 year experience in Managed Care/call center handling high-volume calls. Duties: • Provide customer service to members, providers, and prospective members., • Document all customer contacts into the tracking system., • Process complaints and assist supervisory staff with complaints review., • Handle escalated issues and assist the management team with specialty projects., • Provide administrative support to the Fair Hearings and Complaints Team., • Data entry and intake of complaint and fair hearing cases into designated tools., • Retrieve documents from various systems to demonstrate compliance with state directives., • Collaborate with business partners to gather documentation for responses to state agencies related to complaints and fair hearing requests., • Perform other administrative duties as assigned. Pride Global offers eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance, and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts.

Job title: Complaints Coordinator Job location: New York, NY 10004 Shift: Hybrid 9-5 Date Range: 03/30/2026 - 05/23/2026, Possible Extension Pay: $19- $20/hr without benefits Education: High School Diploma/ GED Skills: Assist Complaints Team leader with MACESS documentation inquiries/complaints. Assist specialists with escalated issues (transportation requests, specialty appointments). Support management with special projects (PCP monthly projects, MIS assignments, PCP error reports). Record and respond to customer contacts and update the tracking system with follow-up and closure. Provide member orientations (on-site and telephone). Process and resolve complaints and update information in the system. Assist with PCP selection/assignment and member demographic updates. Provide benefit/service information to members, prospective members, and providers. Perform retention efforts, handle Medicare overflow calls, and support outreach projects. Handle roster, disenrollment, provider, and claim billing inquiries. Schedule marketing appointments for prospective enrollees. Skills: Customer Focus, Functional/Technical Skills, Written/Oral Communication, Integrity and Trust. 1 year experience in Managed Care/call center handling high-volume calls. Duties: • Provide customer service to members, providers, and prospective members., • Document all customer contacts into the tracking system., • Process complaints and assist supervisory staff with complaints review., • Handle escalated issues and assist the management team with specialty projects., • Provide administrative support to the Fair Hearings and Complaints Team., • Data entry and intake of complaint and fair hearing cases into designated tools., • Retrieve documents from various systems to demonstrate compliance with state directives., • Collaborate with business partners to gather documentation for responses to state agencies related to complaints and fair hearing requests., • Perform other administrative duties as assigned. Pride Global offers eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance, and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts.

Responsibilities Howmet Engines has an immediate opening for a Maintenance Technician-Mechanic to assist in the maintenance process at our facility in Rochester, NY. Basic Functions: Work in a fast-paced manufacturing facility to assist install, maintain, and repair machinery, equipment, physical structures, and pipe and electrical systems in commercial or industrial establishments by performing the following duties. Responsibilities: • Perform routine preventative maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, and the physical condition of the building does not deteriorate:, • Visually inspect and test machinery and equipment, • Listen for unusual sounds from machines or equipment to detect malfunction and discuss machine operation variations with supervisors or other maintenance technicians to diagnose the problem or repair the machine, • Inspect drives, motors, and belts, check fluid levels, replace filters, and perform other maintenance actions, following checklists, • Clean and lubricate shafts, bearings, gears, and other parts of machinery\n, • Troubleshoot and repair various aspects of production machinery, including saws, hydraulic presses and associated forging equipment:, • Repair and replace mechanical components and assemblies, including install of forging dies and fixtures, bearing assemblies, chains, belts and sliding component wear plates, • Troubleshoot, diagnose and repair electrical issues, from control power (transforms, power supplies, contactors, relays, motor starters and overloads) to 480V distribution and motors, • Troubleshoot, diagnose and repair hydraulic issues including loss of system pressures, cylinder actuation, pump or valve leaks or malfunctions; replace hydraulics pumps, motors, cylinders valves and other associated components, • Plan and lay out repair work using diagrams, drawings, blueprints, maintenance manuals, and schematic diagrams, • Align and balance new equipment after installations\n, • Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices, • Operate cutting torches or welding equipment to cut or join metal parts, • Operate overhead cranes and hoists, forklifts, scissor and boom lifts, • Maintain a safe and organized workstation and follow all Company policies, safety, and procedures, • Record maintenance and repair work performed\n\n Qualifications Basic Qualifications: • High school diploma or GED is required, • 3-5 years of experience, • Ability to calculate figures and amounts and apply concepts of basic algebra and geometry, • Must be able to carry out instructions furnished in written, oral, or diagram form, • Ability to deal with problems involving several concrete variables in standardized situations., • Must be certified to operate a forklift and man lift to all approved OSHA and Howmet standards. \n\n, • Salary Range: $24-$25 per hour\n\n Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at . Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email protected] About the Team The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

About LiDestri Foods LiDestri Foods has grown from our roots as a pasta sauce and salsa manufacturer to become an R&D engine, formulating and producing innovative food products for our national and retailer brand partners. A family-run company based in Rochester, NY, LiDestri employs over 1,000 people across three U.S. locations. We have decades-long partnerships with some of the most respected consumer packaged goods (CPG) companies and the most highly inventive retailer brands. Excellent Pay and Benefits: • Great career-pathing, • Professional development, including unlimited online training courses, • Health insurance with premium contributions, • Dental, vision, HSA, • 100% company paid life insurance and long-term disability, • 401k - with employer match, • Paid time off to include- vacation, sick pay, wellness time off, and 10 holidays, • Company bonuses, • The primary role of the Mechanic/Electrician I is to work as a key maintenance team contributor to support company objectives with respect to maintaining equipment to support production requirements using strong mechanical and electrical aptitude., • Setup, repair, install, maintain machinery equipment including; mechanical, electrical, pneumatic and hydraulic systems, special projects, measuring and calibrating equipment, performing preventive maintenance duties;, • Performs all production equipment setups as required to meet operational needs;, • Supports and completes Preventive and Planned maintenance of mechanical and utilities equipment including but not limited to; cleaning, inspecting, setup, diagnosing, replacement, testing and continuous improvements;, • Assists in the diagnoses of electrical and mechanical malfunctions in machinery and equipment. Inspect visually and listen to machines and equipment to locate causes of malfunction;, • Identifies and reports the need for repairs/major repairs to Maintenance Management;, • Crossover with previous shifts' maintenance and production employees to review the schedule and current runs, identifying what needs repair and plan product changeovers;, • Effectively communicate with other departments in a professional manner at all times to communicate on equipment and repair status;, • Works within the maintenance team to accurately communicate/document events so that others have the most effective information to solve problems;, • Assists with the installation of new equipment and enhancing equipment through continuous improvements and upgrades;, • Some basic fabrication skills and use of tools associated with cutting, welding, grinding, soldering;, • Enhances knowledge and skills of mechanical and electrical systems with on the job training;, • Work closely with Engineering, Maintenance Managers and Master Mechanics on projects, continuous improvement and annual plant shut-down maintenance;, • Completes all tasks while strictly adhering to all required industry guidelines but not limited to; Plant Safety, Food Safety, SQF and all internal/external audits;, • High School Diploma or GED required;, • Basic computer literacy as evidenced by the ability to go online and conduct basic searches on the Internet, check email, create and send with attachments and use basic email features;, • Ability to read, write and interpret documents in English such as safety rules, procedure manuals, operating and maintenance instructions;, • Ability to add, subtract, multiply and divide all units of measure, using whole numbers, common fractions and decimals;, • Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists;, • Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form;, • Experience working with manufacturing equipment including 3 phase motors, control wiring, 24VDC, 120VAC, 208/220VAC, 480VAC;, • Experience with Controls for Conveyor Systems, Pneumatics, Hydraulics, Pumps and Valves;, • Knowledge of and ability to comprehend and troubleshoot production machinery (i.e. Fillers, Rinsers, Cappers, Case Packers, Case Formers, Coolers and Pasteurizers);, • Familiarity with Lock-Out Tag-Out Authorized, Hot Work, Confined Space and HECP Training preferred;, • Ability to read and interpret electrical schematics;, • Ability to use a variety of measuring tools and test equipment;, • Ability to work independently, with limited supervision;, • Requires mechanical aptitude;, • Knowledge of Drill Press, Chop Saw, Port-a-Band, Sawzall and other maintenance tools preferred;, • Knowledge or experience with Multi-Meters, Amp Probes, Meger Ohm Meter, Panelview;, • LiDestri experience 2+ years and familiarly with 85% of plant machinery;, • Manlift, Powertools, Hand tools, Panelview Controls, Production Machines, X-Ray Equipment, all types of Photo Eyes, Light Curtains, and Conveyors;, • Kitchen equipment and Pumps, Milling Machine, Lathes and Drill Press;, • Lock-Out Tag-Out Equipment, Gear and HECPS;, • Computer and Printer;, • Ability to climb ladders and use carts;, • Ammeters, ohmmeters, voltmeters, oscilloscopes and motor megger;, • Digital Multimeter and clamp-on AC current reader. Ability to work in a manufacturing environment with exposure to: • Long periods of standing/moving, working around moving mechanical parts/conveyors, • Loud environment, hot/cold, wet/dry conditions, • Lifting/carrying

About LiDestri Foods LiDestri Foods has grown from our roots as a pasta sauce and salsa manufacturer to become an R&D engine, formulating and producing innovative food products for our national and retailer brand partners. A family-run company based in Rochester, NY, LiDestri employs over 1,000 people across three U.S. locations. We have decades-long partnerships with some of the most respected consumer packaged goods (CPG) companies and the most highly inventive retailer brands. Excellent Pay and Benefits: • Great career-pathing, • Professional development, including unlimited online training courses, • Health insurance with premium contributions, • Dental, vision, HSA, • 100% company paid life insurance and long-term disability, • 401k - with employer match, • Paid time off to include- vacation, sick pay, wellness time off, and 10 holidays, • Company bonuses, • And many more.... POSITION SUMMARY: Safely operate machinery with maximum efficiency, while maintaining product quality and following regulatory and company guidelines for sanitation and safety DUTIES & RESPONSIBILITIES: • Operate machinery, to include machine set-up, operation, change overs, and troubleshooting, to detect product (raw or finished) defects or machine malfunctions, adjusting machines as necessary;, • Maintain GMP (good housekeeping) standards at and around machinery;, • Perform SOPs for machinery in assigned area;, • Cross training or training on equipment as defined by manager;, • Maintain accurate document documentation;, • Maintain and issue raw materials into assigned work orders;, • Work in a safe manner, consistent with company safety rules and regulations;, • Maintain good attendance record per company policy;, • High School Diploma or GED preferred;, • Prior machine operation preferred;, • Ability to wear personal protective equipment (bump cap, hair net, ear plugs, beard net (if applicable), Kevlar gloves, safety glasses and leather, skid resistant work shoes/boots;, • Ability to apply basic computer and communication skills, math functions and reasoning;, • Ability to use various hand tools (knife, water house, band cutters, can opener, scales, Telnet scanners, various small hand tools as required for position/product testing);, • Previous experience operating a forklift (for applicable work areas);, • Lock out/tag out certified; Ability to work in a manufacturing environment with exposure to: • Long periods of standing/moving, working around moving mechanical parts/conveyors, • Loud environment, hot/cold, wet/dry conditions, • Lifting/carrying, • Frequent reaching/pulling/climbing stairs/stooping/kneeling/bending DISCLAIMER: The duties listed above are intended only as illustrations of the various types of work that may be performed and is not an inclusive summary of job duties and responsibilities. The omission of specific statements of duties or responsibilities does not exclude them from the position. This job description does not constitute an employment agreement between the employer and the employee and is subject to change by the Company as the needs of the Company and requirements of the job change.

About LiDestri Foods LiDestri Foods has grown from our roots as a pasta sauce and salsa manufacturer to become an R&D engine, formulating and producing innovative food products for our national and retailer brand partners. A family-run company based in Rochester, NY, LiDestri employs over 1,000 people across three U.S. locations. We have decades-long partnerships with some of the most respected consumer packaged goods (CPG) companies and the most highly inventive retailer brands. Excellent Pay and Benefits: • Great career-pathing, • Professional development, including unlimited online training courses, • Health insurance with premium contributions, • Dental, vision, HSA, • 100% company paid life insurance and long-term disability, • 401k - with employer match, • Paid time off to include- vacation, sick pay, wellness time off, and 10 holidays, • Company bonuses, • Operate machinery, to include machine set-up, operation, change overs, and troubleshooting, to detect product (raw or finished) defects or machine malfunctions, adjusting machines as necessary;, • Maintain GMP (good housekeeping) standards at and around machinery;, • Perform SOPs for machinery in assigned area;, • Cross training or training on equipment as defined by manager;, • Maintain accurate document documentation;, • Maintain and issue raw materials into assigned work orders;, • Work in a safe manner, consistent with company safety rules and regulations;, • Maintain good attendance record per company policy;, • High School Diploma or GED preferred;, • Prior machine operation preferred;, • Ability to wear personal protective equipment (bump cap, hair net, ear plugs, beard net (if applicable), Kevlar gloves, safety glasses and leather, skid resistant work shoes/boots;, • Ability to apply basic computer and communication skills, math functions and reasoning;, • Ability to use various hand tools (knife, water house, band cutters, can opener, scales, Telnet scanners, various small hand tools as required for position/product testing);, • Previous experience operating a forklift (for applicable work areas);, • Lock out/tag out certified; Ability to work in a manufacturing environment with exposure to: • Long periods of standing/moving, working around moving mechanical parts/conveyors, • Loud environment, hot/cold, wet/dry conditions, • Lifting/carrying, • Frequent reaching/pulling/climbing stairs/stooping/kneeling/bending DISCLAIMER: The duties listed above are intended only as illustrations of the various types of work that may be performed and is not an inclusive summary of job duties and responsibilities. The omission of specific statements of duties or responsibilities does not exclude them from the position. This job description does not constitute an employment agreement between the employer and the employee and is subject to change by the Company as the needs of the Company and requirements of the job change.

QuidelOrtho unites the strengths of Quidel Corporation and Ortho Clinical Diagnostics, creating a world-leading in vitro diagnostics company with award-winning expertise in immunoassay and molecular testing, clinical chemistry and transfusion medicine. We are more than 6,000 strong and do business in over 130 countries, providing answers with fast, accurate and consistent testing where and when they are needed most - home to hospital, lab to clinic. Our culture puts our team members first and prioritizes actions that support happiness, inspiration and engagement. We strive to build meaningful connections with each other as we believe that employee happiness and business success are linked. Join us in our mission to transform the power of diagnostics into a healthier future for all. As we continue to grow as QuidelOrtho, we are seeking a Distribution & Warehouse Operations Manager. The Distribution & Warehouse Operations Manager leads multisite warehousing (receiving, putaway, storage, inventory control, picking/packing, shipping), 3PL overflow operations, and outbound transportation from the plants to North American distribution centers, as well as order fulfillment and distribution to one directship customer. The role ensures inventory accuracy, ontime/accurate shipments, carrier performance, safety, and cost efficiency, and partners closely with Materials Management, Production Planning, Manufacturing, Customer Service/Order Management, Quality, EHS, Finance, IT/Systems, 3PLs, and carriers. Systems: SAP. This position is onsite in Rochester, NY Schedule: This is primarily a 1st shift position with oversight of all Rochester warehouses. * Strategy & Leadership Own the endtoend execution from receiving through shipment: three plant warehouses, 3PL overflow, and outbound transportation to NA DCs/directship customer. Build and lead highperforming teams (including 1 Warehouse Supervisor), set standards of work, staff to plan, and develop crosstraining for flexibility. Establish a tiered management system (daily/weekly/monthly) with visible KPIs and structured problem solving. * Warehouse Operations (3 Sites) Oversee receiving, putaway, storage/slotting, kitting/staging, picking, packing, and shipping. Drive inventory accuracy via robust cycle counting, root cause analysis, and corrective actions. Optimize layout, slotting, MHE, and racking to improve flow, safety, and productivity. Ensure docktostock and order cycle time targets are met. Maintain SOPs, work instructions, 5S, and visual management. * Distribution, Transportation & DirectShip Fulfillment Own transportation planning, tendering, appointment scheduling, and trackandtrace to NA DCs; manage exceptions proactively. Lead carrier performance (tender acceptance, OTD, claims, cost/stop), and negotiate rates in partnership with Procurement (as applicable). Ensure ontime, infull and compliant shipments to the directship customer, including EDI/ASN timeliness, label/pack compliance, and chargeback prevention. Manage freight claims and work with carriers and plants on corrective actions. * CrossFunctional Integration Partner with Production Planning to align daily/weekly shipping plans, constraints, and recovery plans. Partner with Materials Management for inbound flow, GR/putaway cadence, and to prevent stockouts/linedowns. Partner with Customer Service/Order Management on order promising, prioritization, and customer compliance. Collaborate with Quality on nonconformance handling, holds, and disposition. Coordinate Finance on budgeting, cost controls, and freight audit & pay. Work with IT/Systems on master data (bins, HU/packing specs, shipping conditions), EDI, and system enhancements. * Compliance, Safety & Risk Ensure OSHA and site safety compliance, strict PPE and MHE practices, and lead incident investigations. Maintain DOT/FMCSA compliance for carrier operations (where applicable); ensure hazmat procedures are followed if relevant. Own business continuity and peak/seasonal scaling plans for logistics and warehousing. * Continuous Improvement & Cost Management Lead CI initiatives (Lean/Kaizen, 5S, standard work, SMED for changeovers in shipping/receiving). Improve cost per unit, freight cost per pound/unit, and labor productivity while protecting service and quality. Build and manage annual operating budgets (labor, MHE, supplies, freight) and capex (racking, MHE, automation). Required: • High School Diploma or GED 7-10+ years in warehousing/distribution/logistics. * Demonstrated success with transportation to DC networks and directship customer fulfillment. * ERP/WMS/TMS proficiency (e.g., SAP IM/WM/EWM, TM, or equivalents); strong data discipline and master data acumen. * Working knowledge of OSHA, DOT/FMCSA, hazmat (as applicable). Preferred: * Bachelor's degree in * Multisite responsibility.. * Demonstrated success with transportation to DC networks and directship customer fulfillment. * ERP/WMS/TMS proficiency (e.g., SAP IM/WM/EWM, TM, or equivalents); strong data discipline and master data acumen. * Working knowledge of OSHA, DOT/FMCSA, hazmat (as applicable). Internal:Production Managers, Production Planners, Buyers and Quality External: N/A The work environment characteristics are representative of an office, manufacturing, laboratory, and warehouse environment and include handling of viral and bacterial hazards, potentially hazardous chemicals, as well as infectious or potentially infectious bodily fluids, tissues and samples. Up to 75% of time at desk, standing or sitting extended periods of time. Flexible work hours to meet project deadlines. Position requires ability to lift up to50 lbs.or more at least 35 % of the dayon a regular basis. Walking, standing, andclimbingfor long periods of time (up to50% of the day) are routine to accomplish tasks in this role. Specific vision abilities required by this job include close and distance vision and the ability to adjust focus.Must operatea forklift approximately 15% of the time. QuidelOrtho believes in Equal Opportunity for all and is committed to ensuring all individuals, including individuals with disabilities, have an opportunity to apply for those positions that they are interested in and qualify for without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. QuidelOrtho is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform their duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at ______. #LI-SP1

Job Description Job summary: Perform highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety regulations. Perform building and grounds maintenance as directed. Maintain preventative maintenance systems and processes to support manufacturing. Essential Duties and Responsibilities: • Perform highly diversified duties to install and maintain various types of equipment throughout facility., • Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service., • Perform mechanic skills including, but not limited to, mechanical, electrical, troubleshooting, inspection, and repair of machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Tracks and documents all equipment preventative maintenance and repair., • Responsible for determining and tracking inventory for all spare maintenance parts., • Troubleshoot, repair, maintain, install, and perform testing activities on various computer equipment, peripherals, data communication., • Assist on production floor with material handling, repairs, and maintenance., • Provide contractor support., • Preform Simple Machinist duties and responsibilities. Additional Responsibilities: • Conduct tow motor training., • Perform and document regularly scheduled safety checks on tow motors, eyewash stations, and fire extinguishers., • When requested, may work on special projects and various related assignments., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 50 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low to moderate. Education, Skills and Experience: • High school diploma/GED required., • Experience in building, grounds, and machine maintenance, • Ability to use Excel, Word, and Outlook, • Good communication skills., • Strong knowledge of electrical/electronic practices., • Work independently with minimal supervision.

Looking for LPN jobs that fit your life? If you're tired of having no control over your schedule or just want to earn more money, PRN shifts could be what you're looking for! ShiftKey enables independent Licensed Practical Nurses like you to bid on per diem LPN shifts posted by a vast network of Healthcare Facilities—all based on criteria you select. Choose the facilities you want, on days you want, and bid the rate you want. • Better work/life balance - Don't want to work nights? Need Mondays off? Only want to work once in a while? No problem. Use ShiftKey to work as little or as much as you like., • Extra income - Use ShiftKey to pick up shifts whenever you need a little extra money, even if you have another job. Get paid the next day with a PayCard or go with weekly direct deposit., • Health, • Dental, • Vision, • A high school diploma or GED. You know better than anyone that LPNs are essential members of a facility's medical team. Your role is to assist RNs and physicians in keeping patients comfortable and on the road to recovery. Here are a few things you might do: • Chart and record the administration of medication and treatment., • Patient observation., • Perform specific procedures, such as reading and recording vital signs, measuring and recording weight and height, and running other diagnostic tests. "This was one of the best choices I've made as a nurse. I love the freedom I have now!!" - LVN, Dallas, TX "Amazing! You make your own schedule. You get daily pay or weekly. And they always respond when you need them." - CNA, Springfield, TN "I've been using ShiftKey for years. It's a very good way to work. The people and facilities are respectful and helpful." - CNA, Kansas City, MO

Looking for LPN jobs that fit your life? If you're tired of having no control over your schedule or just want to earn more money, PRN shifts could be what you're looking for! ShiftKey enables independent Licensed Practical Nurses like you to bid on per diem LPN shifts posted by a vast network of Healthcare Facilities—all based on criteria you select. Choose the facilities you want, on days you want, and bid the rate you want. • Better work/life balance - Don't want to work nights? Need Mondays off? Only want to work once in a while? No problem. Use ShiftKey to work as little or as much as you like., • Extra income - Use ShiftKey to pick up shifts whenever you need a little extra money, even if you have another job. Get paid the next day with a PayCard or go with weekly direct deposit., • Health, • Dental, • Vision, • A high school diploma or GED. You know better than anyone that LPNs are essential members of a facility's medical team. Your role is to assist RNs and physicians in keeping patients comfortable and on the road to recovery. Here are a few things you might do: • Chart and record the administration of medication and treatment., • Patient observation., • Perform specific procedures, such as reading and recording vital signs, measuring and recording weight and height, and running other diagnostic tests. "This was one of the best choices I've made as a nurse. I love the freedom I have now!!" - LVN, Dallas, TX "Amazing! You make your own schedule. You get daily pay or weekly. And they always respond when you need them." - CNA, Springfield, TN "I've been using ShiftKey for years. It's a very good way to work. The people and facilities are respectful and helpful." - CNA, Kansas City, MO

Job DescriptionSalary: 60k - 90k DOE Position Summary The Inside Sales Representative is responsible for selling products and/or services within a retail environment, often engaging directly with customers who visit the store. This position will focus on building relationships with customers, understanding their needs, and guiding them through the sales process. Other key job functions include lead generation, CRM management, and meeting targeted sales goals. Essential Duties and Responsibilities Greets customers coming into the facility, listens/understands needs, and provides personalized recommendations to enhance their experience. Demonstrates an in-depth knowledge of products and services to effectively answer customer questions and showcase features. Processes sales transactions accurately and efficiently, including handling any customer concerns. Sources new sales opportunities through inbound lead follow-ups, outbound cold calls, and emails. Maintains accurate records of customer interactions and sales activities in a CRM system. Meets and exceeds sales targets by up-selling and cross-selling products. Builds and maintains working relationships with customers to understand their needs, provide tailored solutions and encourage repeat business. Demonstrates products and/or services, negotiates terms, and closes sales to meet or exceed targets. Collaborates with team members and channel partners to share insights, develop strategies and achieve sales goals. Remains up to date on industry trends, market condition and competitors' activities. Performs related duties as assigned. Skills and Experience Minimum of three years experience in sales, customer service, or related field. Previous experience in the automotive industry a plus. Familiarity with CRM software and sales tools. Strong communication and interpersonal skills to build relationships with customers. Persuasive and negotiation abilities to close deals effectively. Organizational skills to manage leads, follow-ups and sales pipelines. Adaptability and problem-solving skills to address customer needs. Education High School diploma or GED required. Bachelors degree in business administration or marketing preferred. Physical Demands While performing the duties of this job, the employee is regularly required to sit; use hands to operate a computer or other office equipment. The employee must occasionally lift and/or move up to 50 pounds. Work Environment While performing the duties of this job, the noise level in the work environment is usually quiet to moderate. Schedule Monday through Friday Location In-Person. Henrietta, NY 14623.

Job Description Locations: Gates and Brighton, NY Job Type: Part-Time/In Person Starting Pay: $18.50-$20.50 per hour Scheule: Monday-Friday (10:00am-2:00pm) + 1-2 Saturdays/month with weekday off (8:30am- 1:00pm) About the Role We're looking for reliable, customer focused Retail Sales Associates to join our medical supply team in our Gates and Brighton locations. This position offers opportunities for growth within the department and movement within the company. You'll be responsible for providing exceptional service, building relationships with our customers, and using your product knowledge to meet their medical needs. Key Responsibilities • Greet and assist walk in customers in a courteous and timely manner., • Provide product information and insurance coverage guidance in person and by phone., • Use strong communication skills to serve as a trusted advisor to our customers., • Maintain up to date knowledge on product features, care, and patient needs., • Cross-sell and recommend additional items based on diagnosis and needs., • Accurately enter customer data and documentation into systems., • Handle payments (co-pays, deductibles, full amounts) per company procedures., • Ensure HIPPA compliance and practice confidentiality and safety protocols. Education & Certifications: • 1+ years pf related experience preferred (advanced education may substitute), • Strong computer skills, • Attention to detail and the ability to work independently, • Ability to multitask in a fast-paced environment, • Excellent verbal and written communication skills, • Frequent movement around the store to assist customers and restock shelves, • Ability to lift and/or move up to 50lbs occasionally, • Low to moderate noise levels in the showroom, • Collaborative, customer-facing work setting, • 401 (k) with company match, • Medical, dental, and disability insurance, • FLSA Status: Non-exempt, • Must be able to reliably commute or relocate to Rochester, NY prior to start Ready to join a supportive team in a growing company? Apply today and make a difference in the lives of customers seeking essential medical supplies. Must submit to a background check.

Plaza Director – Quick Service - Multi Unit Exp Required Earn $80K/year Competitive Pay and Great Benefits! Now Hiring… Clifton Springs Travel Plaza Mile Marker 337 New York State Throughway, Clifton Springs, NY 14432 We build our business through our people. “Get Paid as You Earn! Applegreen is excited to offer Paycheck On-Demand delivered by PayActiv Early Wage Access (EWA)” At Applegreen, we believe that our employees are the cornerstone of our success. As a company, we are constantly growing our business—but it’s our people driving our success! We strive to do great things for each other, our customers, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, whatever you’re pursuing — a new challenge, a sense of belonging, or just a great place to work — Applegreen is for you! At Applegreen, we Refresh Travelers on their Journey…. Applegreen USA operates over 80 travel plazas across the Northeast and Midwest that provide convenience, comfort, retail, and an extensive range of delicious food options such as Auntie Anne’s, Burger King, Chick-fil-A, Cinnabon, Dunkin Donuts, Panda Express, Panera, Popeyes, Pret, Shake Shack, Starbucks, and many more. Our Core Values Our Core Values are what we stand for. They guide and motivate our attitudes and behaviors to our customers, our suppliers, our business partners, and each other. • Our customers and communities are at the heart of everything we do., • We value and develop our people., • We are driven by pace, passion and performance., • Flexible Schedules, • Medical/Dental/Vision Insurance, • Paid Time Off, • 401 (k) with Company Match, • Earned Wage Access – Pay on Demand, • Education Assistance, • Employee Referral Bonus, • Meal Discount, • Pet Insurance What you will be doing: As the Quick Service Restaurant Director – Multi Unit, you will assist the Plaza Director in managing the overall day-to-day operations and long-term profitability of a multi-million-dollar travel plaza located along a major highway. This position is charged with successfully collaborating with the Plaza Director to lead a dedicated team of associates and managers, to ensure our customers (travelers) receive fast and friendly service, and to sustainably achieve or exceed financial and performance targets. • Assume full responsibility for the travel plaza in the absence of the Plaza Director., • Lead the day-to-day activities of associates and plaza leadership to achieve or exceed targeted objectives around sales, speed of service, customer satisfaction, brand standards, and food quality & safety standards., • Assist with monitoring progress towards targeted financial and performance objectives then support strategic changes to sustainably maximize performance and profitability., • Ensure that each food and beverage concept within the plaza is adhering to the required brand standards., • Contribute to an engaging work culture of continuous learning, information/skill sharing and professional development, by modeling behavior and maintaining a culture of accountability., • Consistently recruit, develop, and retain strong teams to maintain appropriate staffing levels across the plaza., • Support the supervision and management of plaza leadership to ensure they are meeting their individual goals, their business goals, and appropriately supervising & managing their direct reports., • Ensure compliance with company policies & procedures along with local, state, & federal laws., • Handle customer inquiries and complaints in a professional and timely manner, • Work collaboratively with a variety of support partners such as Brand Partners, Human Resources, Loss Prevention, Finance, and Facilities & Maintenance. What Applegreen requires from you: • Must have Multi-Unit experience, • Utilize computerized software and systems such as Microsoft Suite, payroll & time keeping software, inventory management software, and various point-of-sales systems., • Ability to operate in and navigate through ambiguity, drive clarity, and effectively manage change in a fast-paced environment., • Demonstrate excellent communication and collaboration skills., • Possess a proven background in maintaining strong cost control and quality standards., • ServSafe Certification Preferred, • High school diploma or general education development (GED) equivalent, • 3+ years of proven success in restaurant or retail leadership, • Available to work a flexible on-site schedule approximately 50 hours per week including days, nights, weekends, and holidays., • Maintain regular and consistent attendance and punctuality, with or without reasonable accommodation., • Able to stand and walk for an extended period of time; frequently bend, twist, lift and carry at least 20 pounds., • Occasionally attend meetings or travel to support other locations. Join our amazing team…and you will feel at home with Applegreen! We strive to do great things for each other, our customers, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, whatever you’re pursuing — a new challenge, a sense of belonging, or just a great place to work — Applegreen is for you! Interested Candidates please send your resume. Applegreen Come grow with us! Join our amazing team…and you will feel at home with Applegreen! Applegreen NY Travel Plazas is an EEO Employer Drug Free Workplace.

Job Description Locations: Gates and Brighton, NY Job Type: Full-Time/In Person Starting Pay: $18.50-$23.00 per hour Scheule: Monday-Friday (8:30am-5:00pm) + 1-2 Saturdays/month (8:30am- 1:00pm) About the Role We are seeking a reliable, customer-focused DME Inside Sales Specialist to join our medical supply team at our Gates and Brighton locations. This role offers a clear opportunity for professional growth, including advancement into a DME Coordinating position. You will be responsible for delivering exceptional customer service, building strong relationships, and using product knowledge to meet patients' medical equipment needs while developing skills necessary for long-term career growth within the company. Key Responsibilities • Greet and assist walk-in customers in a courteous and timely manner, • Provide product information and insurance coverage guidance, both in person and by phone, • Serve as a trusted advisor through strong communication and customer service skills, • Maintain up-to-date knowledge of product features, insurance coverage and patient needs, • Cross-sell and recommend additional products based on diagnoses and customer needs, • Accurately enter customer data and required documentation into company systems, • Collect and process payments (co-pays, deductibles, and full payments) per company procedures, • Ensure HIPAA compliance and maintain confidentiality and safety standards, • Assist with daily restocking and participate in periodic inventory tasks Growth & Advancement Opportunity This position offers a defined pathway for advancement into a DME Coordinator role for individuals who demonstrate strong performance, initiative, and a desire to grow within the company. DME Coordinator responsibilities may include and are not limited too: • Managing patient orders from intake through delivery or pickup, • Coordinating with clinicians, insurance providers, and vendors to ensure timely order fulfillment, • Reviewing prescriptions, documentation, and insurance requirements for accuracy and compliance, • Communicating order status updates to patients and other team members, • Troubleshooting order issues and resolving insurance or documentation barriers Education & Certifications • High School Diploma or GED (required) Experience & Skills • 1+ year of related experience preferred (advanced education may substitute), • Strong computer and data entry skills, • Excellent attention to detail and ability to work independently, • Ability to multitask in a fast-paced environment, • Motivated, dependable, and team-oriented mindset Language & Communication • Excellent verbal and written communication skills, • Customer-first attitude with the ability to resolve concerns professionally Physical Requirements • Frequent movement throughout the store to assist customers and restock shelves, • Ability to lift and/or move up to 50 lbs occasionally, • Ability to bend, kneel, crouch, and use standard office equipment Work Environment • Low to moderate noise levels in the showroom, • Collaborative, customer-facing work environment, • Ability to handle occasional high-pressure or time-sensitive situations professionally Benefits • 401(k) with company match, • Medical, dental, and disability insurance, • Paid time off (PTO) Additional Details • FLSA Status: Non-exempt, • Must be able to reliably commute to or relocate to Rochester, NY prior to start, • Traveling to both locations maybe required Ready to build a career-not just a job? Apply today and grow with a company that values development, teamwork, and quality patient care. Must submit to a background check.

Warehouse Supervisor – Rochester, NY Pay: $68,000–$72,000/year + bonus Schedule: Sunday, Monday, Wednesday, and Thursday | 5:00 PM – 4:00 AM We are seeking an experienced Warehouse Supervisor to oversee all inbound product receiving functions within a high-volume distribution center. This role is responsible for ensuring inventory accuracy, supervising receiving operations, maintaining compliance with safety and quality standards, and leading a team of warehouse associates. What You’ll Do • Direct and coordinate daily activities of receiving coordinators and warehouse associates, • Ensure accuracy of inbound product, data entry into Warehouse Management System (WMS) and JD Edwards (JDE 9.1), • Oversee quality assurance processes, including DQMP inbound check-in guidelines, • Enforce food safety, quality, and operational standards, • Plan, assign, and monitor workloads to meet productivity and labor targets, • Interview, hire, train, evaluate, and discipline team members in accordance with company policy, • Schedule and manage backhaul appointments, including MercuryGate and JD Edwards entries, • Monitor railcar releases, demurrage risk, and inbound load reporting, • Generate daily receiving schedules and ensure dock door assignments are executed properly, • Utilize WMS reporting to manage code dates, inventory rotation, slotting, and adjustments, • Promote workplace safety and ensure equipment is maintained and operational, • Identify and implement process improvements to increase efficiency What You Bring • High School Diploma or GED required; Bachelor’s degree preferred, • 3–5 years of warehouse leadership or Engineered Labor Management experience, • Experience with WMS systems and JD Edwards, • Knowledge of engineered labor standards and voice selection systems (Lucas preferred), • Strong Microsoft Excel, Word, and PowerPoint skills, • Experience with inventory control, process management, and safety compliance, • Proven leadership skills with ability to coach, mentor, and drive performance Why You’ll Like It Here • Competitive salary, • Leadership opportunity with direct operational impact, • Growth and development opportunities, • Competitive benefits package, PTO, and 401(k) with company match, • Community involvement and volunteer opportunities If you’re a hands-on warehouse leader who thrives in a fast-paced distribution environment and values accuracy, accountability, and team development, we want to hear from you.

Position: Project Manager - Industrial Automation Location: Rochester, NY or Painted Post, NY Employment Type: Full-Time Compensation: 120,000 – 150,000 base + bonus Travel: ~30% (primarily regional day trips with occasional overnights) Manages Others: No Education: High school diploma or GED required; Bachelor’s degree in business, engineering, or related field preferred Experience: 7+ years managing large-scale industrial automation, material handling, or construction projects About This Opportunity: Adaptec Solutions is seeking an experienced Project Manager to lead complex industrial automation and material handling projects from concept through commissioning. In this high‑impact, high‑visibility role, you will serve as the primary customer contact and guide cross-functional teams to deliver projects on time, within budget, and to defined scope and quality expectations. You will manage a project portfolio of approximately $2M–$5M, influence PMO practices, strengthen customer relationships, and support the continued growth of Adaptec’s project management organization. What You’ll Do: • Lead all phases of project execution from kickoff through final acceptance., • Coordinate all project activities from receipt of customer order through completion, ensuring alignment across engineering, build, installation, and integration teams., • Apply strong financial oversight to maintain positive cash flow, track costs, and meet critical deadlines., • Manage project budgets, financial forecasts, cash flow, and milestone reporting., • Develop, maintain, and track project schedules using Wrike (or other scheduling tools)., • Develop detailed project schedules inclusive of in-scope engineering, build, installation, and integration activities, including relevant external milestones., • Serve as the primary customer point of contact; coordinate internal and external meetings., • Oversee internal and external resources to ensure delivery of scope and project outcomes., • Administer contracts, manage risk, and execute change management processes., • Prepare and provide Project Change Orders (PCOs) related to scope or schedule changes., • Use data‑driven decision-making and reporting tools to maintain project schedule, budget, and scope., • Develop and execute equipment commissioning, process commissioning, and integration test plans., • Travel to customer sites for kickoff, installation kick off, and acceptance testing (~30%). What You Bring: • 7+ years managing large-scale industrial automation, material handling, or construction projects., • Bachelor’s degree in business, engineering, or a related field preferred; equivalent combinations of experience and certifications (PMP, Lean Six Sigma, Agile/Scrum) considered., • Experience managing 10+ projects with a combined portfolio of $2M+., • Demonstrated expertise in financial control, risk management, scheduling, and contract administration., • Strong understanding of automation systems, integration, commissioning, and supplier relationships., • Experience with labor/material tracking tools like Wrike, Smartsheet, or ERP systems., • Ability to develop dashboards, KPIs, and data-driven reporting for project performance., • Excellent leadership, communication, and negotiation skills with the ability to influence stakeholders at all levels., • Strong organizational and analytical abilities with a focus on financial outcomes and continuous improvement., • Advanced problem‑solving and decision‑making capabilities with a forward‑thinking, proactive approach., • Proven ability to coordinate on-site activities with customers and contractors in complex environments., • Capable of developing and delivering presentations and written materials for diverse audiences., • Ability to read and interpret engineering and industry‑related technical instructions and specifications., • Forward‑leaning mentality, continually looking for ways to solve problems and improve outcomes. What Success Looks Like: • Consistently delivers projects on time, within budget, and within scope., • Maintains accurate forecasting and strong cash flow performance., • Demonstrates strong customer satisfaction and supports repeat business., • High-impact role with visibility across executive leadership and customers., • Opportunity to lead industry-defining automation solutions that shape the future of manufacturing and distribution., • Collaborative, growth-oriented environment with room to influence PMO practices., • Competitive compensation and benefits, plus the ability to work on projects that truly make a difference. In compliance with pay transparency requirements, the wage range for this role is $120,000 – 150,000/yr. The rate range provided is a general guideline. When extending an offer, Adaptec Solutions considers factors including, but not limited to experience and geographic location. Adaptec Solutions also offers a variety of benefits including generous paid time off (PTO), 11 paid company holidays including your birthday, generous health plans, dental and vision insurance, HSA/FSA accounts, generous 401(k) match and immediate vesting, short-term/long term disability coverage and basic life/AD&D insurance and education assistance. Adaptec Solutions, LLC is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

QuidelOrtho unites the strengths of Quidel Corporation and Ortho Clinical Diagnostics, creating a world-leading in vitro diagnostics company with award-winning expertise in immunoassay and molecular testing, clinical chemistry and transfusion medicine. We are more than 6,000 strong and do business in over 130 countries, providing answers with fast, accurate and consistent testing where and when they are needed most - home to hospital, lab to clinic. Our culture puts our team members first and prioritizes actions that support happiness, inspiration and engagement. We strive to build meaningful connections with each other as we believe that employee happiness and business success are linked. Join us in our mission to transform the power of diagnostics into a healthier future for all. At QuidelOrtho, we're advancing the power of diagnostics for a healthier future for all. Join our mission as our next Operator in the Slide Assembly Department. This position is responsible for quality and maintaining the highest standards in compliance within company policies, procedures and all applicable regulations. Accountable for adhering to all EHS guidelines. This position is located in Rochester, NY. Work Schedule: "Firemen's Rotation": Two 12 hour days (6:00am-6:00pm) followed by two 12 hour nights (6:00pm-6:00am) * Operate manufacturing machinery in Slide Manufacturing. * Utilize inspection tools, including visual inspection, to assess product quality. * Adhere to all approved and documented processes. * Work closely with maintenance/engineering to minimize equipment downtime. * Work closely with other manufacturing support areas to coordinate activities. * Maintain a clean & orderly work environment. * Escalate issues to supervisor, mechanic, or engineer. * Participate in effective shift crossovers. * Work closely with peers. * Accurately complete documentation to ensure acceptable quality records. * Maintain individual training records. * Work with computer controlled equipment and processes. * Follow safety procedures and practices. * Perform other work-related duties as assigned. The Individual Required: * A minimum of a High School diploma, GED. * A minimum of 6 months of related experience within a manufacturing environment. * Ability to perform basic machine adjustments * Experience in a regulated industry (cGMP, SOPs, audits, etc.) * Proficiency in computers (i.e.; email, internet explorer, MS Word, etc.) * Strong communication skills: Reading, writing, and team interaction. * Dependable team player with a "can-do" attitude. Preferred: * Experience with SAP. * Experience with Lean Manufacturing. * Exhibit an ability of mechanical aptitude. Key Working Relationships Internal Partners: Maintenance, Engineering, Quality External Partners: Suppliers The work environment characteristics are representative of a manufacturing, laboratory, or warehouse environment and include handling of viral and bacterial hazards, potentially hazardous chemicals, as well as infectious or potentially infectious bodily fluids, tissues, and samples. Up to 75% of the time you will be, standing, walking or sitting for extended periods of time. Ability to lift up to 50 lbs. Flexible work hours to meet project deadlines. The salary range for this position takes into account a wide range of factors including education, experience, knowledge, skills, geography, and abilities of the candidate, in addition to internal equity and alignment with market data. At QuidelOrtho, it is not typical for an individual to be hired at or near the top range for their role and compensation decisions are dependent on the facts and circumstances of each case. The salary range for this position is $20.75 to $23.38 hourly and is bonus eligible. QuidelOrtho offers a comprehensive benefits package including medical, dental, vision, life, and disability insurance, along with a 401(k) plan, employee assistance program, Employee Stock Purchase Plan, paid time off (including sick time), and paid Holidays. All benefits are non-contractual, and QuidelOrtho may amend, terminate, or enhance the benefits provided, as it deems appropriate. QuidelOrtho believes in Equal Opportunity for all and is committed to ensuring all individuals, including individuals with disabilities, have an opportunity to apply for those positions that they are interested in and qualify for without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. QuidelOrtho is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform the duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at ___.

QuidelOrtho unites the strengths of Quidel Corporation and Ortho Clinical Diagnostics, creating a world-leading in vitro diagnostics company with award-winning expertise in immunoassay and molecular testing, clinical chemistry and transfusion medicine. We are more than 6,000 strong and do business in over 130 countries, providing answers with fast, accurate and consistent testing where and when they are needed most - home to hospital, lab to clinic. Our culture puts our team members first and prioritizes actions that support happiness, inspiration and engagement. We strive to build meaningful connections with each other as we believe that employee happiness and business success are linked. Join us in our mission to transform the power of diagnostics into a healthier future for all. As we continue to grow as QuidelOrtho, we are seeking an Operator III, Slides Manufacturing in the Slide Assembly Department. This position is responsible for using equipment for the assembly and process of tasks to produce, inspect in-process and finished products and package according to established specifications. Adheres to Company Environmental, Health, Safety and Sustainability policies, procedures, and values to help drive EHS culture. Demonstrates technical understanding of the job; may be viewed as the technical SME. Interprets instructions and specifications and uses to set up equipment. Checks products on assembly line to confirm that they are properly assembled and removes defective products. Cleans and maintains equipment as needed. Notifies supervisor or appropriate personnel of maintenance and/or repairs needed on equipment. Can identify and troubleshoot moderate production issues. Reports and documents unresolved production problems. May participate in the execution of validation/revalidation protocols. This position is located in Rochester, NY. Work Schedule: "Firemen's Rotation": Two 12 hour days (6:00am-6:00pm) followed by two 12 hour nights (6:00pm-6:00am) * Consistently meet production metrics on at least one piece of automated production machine with minimal supervision. * Assist in troubleshooting and repairing equipment. * Perform basic data entry, i.e. SAP, SPIDER, etc. * Perform basic quality checks and escalate as needed. * Participate in simple root cause analysis under supervision. * Follow and contribute to updates in SOPs, work instructions, and job plans. * Ability to perform basic machine adjustments under guidance of a senior operator. * Encourages positive relationships by utilizing effective communication skills. * Performs multiple job functions within the Work Center and willingly flexes as business needs dictate. * Identifies EH&S opportunities and provides recommendations. * Participates in implementation of solutions. * Aligns development with business needs. * Participates in cross training. Required Skills: * High School Diploma or GED. * 2-4 years of experience within operations/manufacturing environment. * Fluent in the use of business systems (SAP, OTIS, QERTS, MS Office, etc.). * Ability to read and write English; strong mechanical aptitude; strong troubleshooting and problem solving skills; visual acuity; able to lift up to 50 lbs.. * Frequent lifting of 21-30 lbs., and use force to pull or push up to 800lbs devices with wheels. * Ability to work a rotating shift schedule, overtime and weekends as needed to meet production requirements. Additional Skills: * Intermediate math and communication skills. * Familiarity with basic tools and practices. * Basic problem-solving skills. * Basic knowledge of 5S and ability to apply concepts. * Ability to navigate through HMI screens. * Ability to recognize patterns of failures within an automated manufacturing line. * Understanding of basic GMP and compliance in a regulated industry. * Ability to complete paperwork with high accuracy following good documentation practices. Internal Partners: Maintenance, Engineering, Quality External Partners: Suppliers The work environment characteristics are representative of a manufacturing, laboratory, or warehouse environment and include handling of viral and bacterial hazards, potentially hazardous chemicals, as well as infectious or potentially infectious bodily fluids, tissues, and samples. Up to 75% of the time you will be, standing, walking or sitting for extended periods of time. Ability to lift up to 50 lbs. Flexible work hours to meet project deadlines. The salary range for this position takes into account a wide range of factors including education, experience, knowledge, skills, geography, and abilities of the candidate, in addition to internal equity and alignment with market data. At QuidelOrtho, it is not typical for an individual to be hired at or near the top range for their role and compensation decisions are dependent on the facts and circumstances of each case. The hourly range for this position is $20.20 - $27.00 hourly. QuidelOrtho offers a comprehensive benefits package including medical, dental, vision, life, and disability insurance, along with a 401(k) plan, employee assistance program, Employee Stock Purchase Plan, paid time off (including sick time), and paid Holidays. All benefits are non-contractual, and QuidelOrtho may amend, terminate, or enhance the benefits provided, as it deems appropriate. Equal Opportunity QuidelOrtho believes in Equal Opportunity for all and is committed to ensuring all individuals, including individuals with disabilities, have an opportunity to apply for those positions that they are interested in and qualify for without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. QuidelOrtho is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform the duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at ___. #LI-SP

Job DescriptionWHO WE ARE: The Children's Home partners with children, families and communities throughout New York State to inspire hope, develop skills, and cultivate healthy relationships for positive futures.$18-$25/hour Full Time and Part Time availableBilingual (Spanish) preferredPosition Summary: Children and Family Treatment Support Services (CFTSS) provides voluntary therapeutic support to youth under 21. Through Psychosocial Rehabilitative Services (PSR) and Community Psychiatric Support and Treatment (CPST), providers deliver social and emotional support tailored to each youth's needs. Using Dialectical Behavioral Therapy (DBT), the program helps youth build skills to overcome behavioral challenges and achieve healthy, age-appropriate functioning in home, school, and community settings. Responsibilities: • Provide Community Psychiatric Support and Treatment (CPST)., • Build strong and supportive, therapeutic relationships with youth and their families that meet their needs and follow their treatment plan, • Promote the caregiver-child relationship in accordance with the established treatment plan., • Timely identify and effectively communicate all behavioral, emotional or medical needs with consented providers that are involved in the youth's care., • Confer regularly with the program supervisor, licensed professional, and program director as needed on each child's progress., • Providers are responsible for completing required administrative functions, including scheduling visits with child/youth, planning activities with youth, and completing all documentation requirements in a timely manner., • Providers are responsible for providing safe transportation as a part of service delivery., • Providers must collaborate with child/youth, family members, and other involved service providers to provide comprehensive care. Requirements Education: • High School Diploma/GED - PSR position - required, • Bachelor's Degree in Human Services or related field - for CPST positionExperience, • 2 years experience in Human Service field required, • Driver's License and ability to maintain insurability throughout employment required.BenefitsBenefits available to all staff:, • Student Loan and Tuition Reimbursement, • Employee Assistance Program, • Employee Discounts at the Southern Tier Community Center, • Opportunities for Professional DevelopmentFull Time Benefits:, • Agency-Paid CEUs, License Prep Course, and License Exam, • 403(b) with 6% employer contribution, • PTO plus 9 paid holidays, • Childcare Reimbursement, • Health, Dental, and Vision Insurance (with HSA/FSA Accounts) Job Posted by ApplicantPro

Job DescriptionBenefits/Perks • Flexible Schedule, • Competitive Pay, • Career Advancement Job SummaryWe’re looking for a hardworking Maintenance Technician to join our team! You’ll make sure our facilities are operating efficiently, regularly inspect our building for any damage, and conduct routine maintenance on our equipment to keep it running smoothly. The ideal person for this job is a reliable team player and a problem solver who has some prior maintenance experience. If you’re looking for a job at a fast-growing company that really values its employees, reach out to us today! Responsibilities • Conduct routine maintenance on equipment and systems such as HVAC units, plumbing fixtures, and electrical wiring to make sure they’re operating efficiently and make any needed repairs, • Inspect the building for any structural damage to windows, doors, and walls and perform necessary repairs, • Keep a record of completed repairs and when the equipment was last serviced, • Develop and execute preventative maintenance measures to keep our equipment operating efficiently and prevent any safety risks, • Handle additional maintenance tasks as neededQualifications, • High school diploma/GED or equivalent, • At least 2 years of maintenance experience, • Knowledge of heating and air conditioning units, plumbing systems, and electrical systems, • Advanced understanding of maintenance equipment, procedures, and techniques, • Available to be on call and respond to maintenance requests on nights and weekends, • Excellent work ethic, communication skills, time management skills, and attention to detail

Overview: Home Case: Monday 4pm-6pm, Tuesday & Wednesday 4pm-7pm & Saturday 9am-12pm Proud Moments ABA is a national behavioral health organization, providing the gold standard of Applied Behavior Analysis (ABA) services for children on the autism spectrum from birth to age 21. We are looking for Behavior Technicians (BT's) to join our growing team. Our BT's are an essential part of the treatment team- providing 1-1 specialized treatment in partnership with our Board Certified Behavior Analysts to our clients in a home-based setting. If you are looking for a career that allows you to provide life changing treatment to children this could be the role for you - if you have the passion we have the training! What Proud Moments can offer you: • Flexible part-time/evening/afternoon hours, • Paid training and support to feel confident in your ability to execute treatment plans, • Fun, challenging, fulfilling, team-oriented, work environment, • The ability to positively impact the lives of families and their children on the autism spectrum, • Competitive compensation, • Career growth, • A passion and love for working with children, • Ability to work in an everchanging, fast paced environment, • Have a strong, reliable work ethic (your clients depend on you), • Ability to work both independently and in a team environment, • Strong communication skills and ability to interact with children and parents, • Fun, creative, and innovative ideas to engage your client Responsibilities:, • Work one-on-one with a client in their home to implement behavioral plans designed by Board Certified Behavior Analyst (BCBA), • Collect data to monitor the progress and effectiveness of the individualized treatment plan and report progress, • Support BCBA with training families on implementing individualized treatment plans, • Be responsive to the needs and requests of clients, their families, and supervisors, • Maintain clear lines of communication with families, supervisors, and other applicable parties, • Physically keep up with clients as they move about the session area(s). This will require many physical activities including, but not limited to, standing, sitting, bending, lifting 25+ pounds, running, squatting, kneeling, and generally keeping pace with children from 2-15 years old, • Any other tasks outlined by BCBA/LBA Qualifications:, • High school diploma or GED required, • Prior experience working with children preferred, • Prior experience providing support to children or adults with behavioral challenges, developmental delays, or special needs preferred, • Exposure to Autism Spectrum Disorder (ASD) or other developmental disabilities is preferred, though comprehensive training will be provided, • Reliable personal transportation with the ability to commute consistently to assigned work locations, • Ability to maintain confidentiality of client, family, and organizational information in accordance with HIPAA and company policies, • Demonstrated ability to prioritize and manage multiple tasks simultaneously in a fast-paced, client-focused environment, • Clear verbal and written communication skills, with the ability to follow detailed instructions and document information accurately, • Strong problem-solving skills and attention to detail, with the ability to stay organized and adapt to changing schedules or priorities, • $19-22 an hour #BT2

Job DescriptionDescription: The Overnight Peer Mentor provides awake overnight peer support and supervision to ensure the safety and security of the environment. This role is integral in supporting guests in their recovery process, maintaining a safe and clean environment, and coordinating effectively with other program staff. Key Responsibilities: Guest Support in Recovery: • Assist guests in articulating and achieving their recovery goals., • Identify and help remove barriers to community integration., • Provide appropriate interventions based on guests’ goals., • Observe and document guests’ progress towards meeting objectives., • Monitor the environment regularly to ensure the safety of guests and the facility., • Respond immediately to crises and emergencies in accordance with organizational policies and procedures., • Respond to warm line calls from individuals in crisis., • Facilitate timely access to services through check-in and check-out activities., • Perform regular light housekeeping and restocking of the facility., • Provide clerical support, including making copies, setting up files or folders, as directed by the immediate supervisor., • Maintain documentation to the standards defined by regulators, funders, and organizational policies. Minimum Education & Experience: • High school diploma or GED., • Past or present consumer of mental health and/or chemical addiction services, with the ability to relate to others currently using those services., • Demonstrated skills in effective oral and written communication and the ability to work cooperatively with culturally diverse guests, staff, and community representatives., • Ability to work independently., • Basic computer literacy, including the ability to perform basic searches online, use email, and make simple edits to documents., • Basic Microsoft Word skills, including the ability to produce basic business letters and simple tables and charts, check spelling, set tabs, change page orientation, sort, save, open, and organize electronic files., • Frequently requires sitting, handling objects and paperwork, working with a computer, and communicating with others verbally and in writing., • Occasional lifting of up to 30 lbs., walking, climbing stairs, standing, and reaching., • Finger dexterity sufficient to operate a telephone and computer keyboard., • Hearing ability to hear normal conversation., • Visual ability to read documents and a computer screen., • Ability to read and interpret policies, procedures, and various other information., • Traditional household environment., • Responds to crises during on-duty hours., • Must be available to work weekends, some evenings, and holidays.

Job Description Kelly Services is now hiring for a Customer Support Associate to work at Bausch & Lomb in Rochester NY. Sound good? Take a closer look below. We’re here to help you find something great that works for you so you won’t miss a moment of what really matters in your life. Details • Shift: Monday-Friday 9:30am - 6pm, • $17.25/hr, • Hybrid schedule after training with 3 days in office and 2 days remote. Why you should apply to be a Customer Support Associate: • Cutting-edge manufacturing facility, • Strong industry standing, • Opportunity for growth and development Responsibilities: • Managing order processing via email, fax, telephone, and electronic systems with accuracy and speed for small to medium-sized direct trading partners., • Monitoring open order reports to ensure orders have cleared through to physical distribution and resolving any issues as required., • Responding to and resolving standard customer inquiries and requests received via telephone, email, mail, and fax in a timely and efficient manner, including product information, ordering, order status, cancellation, tracking information, and billing requests. This job might be an outstanding fit if you: • Computer skills: Proficient in Excel and Word, • Good written and verbal communication, • Detail oriented, • Required HS Diploma or GED What happens next: Once you apply, you’ll proceed to next steps if your skills and experience look like a good fit. But don’t worry—even if this position doesn’t work out, you’re still in our network. That means all of our recruiters will have access to your profile, expanding your opportunities even more. Helping you discover what’s next in your career is what we’re all about, so let’s get to work. Apply to be a Customer Support Associate today! Company DescriptionA career in motion is how you'll thrive and prosper. We work with tons of companies across the nation, and with our strong connections, we'll help take your career forward. At Kelly, we've been transforming ourselves for a while now - constantly striving to reach our full potential, so we can help you maximize yours. We'll help you find what's next.A career in motion is how you'll thrive and prosper. We work with tons of companies across the nation, and with our strong connections, we'll help take your career forward. At Kelly, we've been transforming ourselves for a while now - constantly striving to reach our full potential, so we can help you maximize yours. We'll help you find what's next.

Job Description Start a fulfilling journey at Autism Learning Partners, supporting children and teens with autism. Build your career while making a positive impact every day! Schedule & Pay * Hours: All weekdays Monday - Friday from 3:30pm to 8pm * Work Setting — you’ll primarily provide services in client’s homes, with some sessions held in our local centers depending on your client’s needs * Daily pay access available so you can get paid as you earn • Compensation: $20.00-$25.75/hr What You’ll Need * High School Diploma or GED completed * 6+ months of experience with kids (paid or volunteer — babysitting counts!) * Reliable car, driver’s license, and insurance * Willingness to pass background and health checks * Ability to read, write, and speak English Proficiently * A big heart, patience, and the ability to keep up with energetic kiddos What You’ll Do * Help Kids Learn Through Play: Teach children new skills like communication, sharing, or following directions — often through fun games or activities. * Be a Positive Role Model: Encourage progress and celebrate small victories every day. * Stay Active: You’ll be moving around, playing, and engaging throughout your sessions. * Keep Things Organized: Track what you worked on and how your kiddo did (we’ll train you on this too). * Support Families: Be part of a team that helps families see real progress and hope. Why You’ll Love Working Here * Full, paid training (no experience needed!) * Growth opportunities — many of our leaders started in this role * Additional $2/hr evenings/weekends * Referral Program: $1,000 referral bonus * Benefits: Health, dental, vision (based on hours), mileage reimbursement, paid drive time * Perks: Cell phone stipend, education assistance, and employee discounts Ready to Get Started? If you’re caring, dependable, and want a rewarding part-time job that matters, we’ll train you to become a certified Behavior Technician and help children reach their full potential. Apply today and start turning your love for kids into a meaningful career! Autism Learning Partners is an Equal Opportunity Employer. We are proud to support a diverse workforce and encourage applicants from all backgrounds. ROCBT123

Job Description CERTIFIED PEER SPECIALIST JOB TITLE: Certified Peer Specialist POSITION GRADE: 74 Pay commensurate with education and experience $15.50-18.00/hr DEPARTMENT/PROGRAM: Hope Place SUPERVISOR: Hope Place Program Manager FLSA: NON-EXEMPT JOB SUMMARY: Under the general direction of the Hope Place Program Manager, the Certified Peer Specialist is responsible for providing quality, trauma-responsive care and programing for adults, ages 18 and older, experiencing a mental health pre-crisis or crisis, by providing the least restrictive means of crisis stabilization and treating guests to ensure their return to a higher level of functioning as quickly as possible. The program will serve those with mental health challenges, co-occurring disorders and developmental challenges; carry out all job responsibilities with fidelity and accountability to the Agencies and Program Mission, Vision, Values, Guiding Principles, and Strategic Plan. ESSENTIAL FUNCTIONS: • Exercises full compliance with the Agency’s Code of Conduct, all Agency policies and procedures and Federal and State laws and regulations, • Maintains confidentiality and security for all client and staff related materials and/or records., • Follows crisis/emergency procedure to contact to Hope place Program Manager or Lead Certified Peer Specialist in the event the Certified Peer Specialist needs support, • Assists in the development of and closely follows program & Guests Safety Plans, • Provides individual and group supervision accounts for guests at all times, • Provides a safe environment for guests and staff utilizing the sanctuary model, • Reads and becomes familiar with program policy manual, • Keeps current with the training requirements regarding Therapeutic Crisis Intervention (TCI), Functional Behavioral Approach, Safety In the Community, and Motivational Interviewing and other related trainings., • Employs approved crisis intervention/prevention techniques utilizing accepted practices per Agency policy and procedures, • Documents critical incidents as required by program/agency Communicates concerns, problems, questions to Supervisor, • Assists with projects associated with the Hope Place Program, including internal and external committees, task forces and special initiatives, • Exercises daily decision-making, problem-solving and ongoing task prioritization, • Makes appropriate referrals and linkages to community supports., • Advocacy; community outreach; education; referrals to other services (health insurance enrollment, housing, legal, care management, basic needs, etc.) or ongoing treatment; tools to support wellness and recovery, • basic intake and triage; Social Determinants of Health (SDOS) assessment, • De-escalation; stabilization; (mindfulness and motivational interviewing); and, brief interventions such as art, and journaling., • Documents progress notes for each visit with clients as assigned in the Electronic Client Record (eCR) within the day of service, • Track and monitor progress and outcomes, • Participates in surveys conducted by referring agencies, • Demonstrates, promotes and practices cultural competency toward Guests and staff through respect and understanding achieved through training and Agency cultural activities, • Recognizes and embraces the diversity of teams, • Supports and develops the strengths of each individual team member, • Fields questions; addresses concern of referral sources/families with Peer Mentor assignments., • Works with Program Manager to develop individualized plans to support and encourage professional growth, • Completes all required documentation according to appropriate time lines., • Attends trainings as required and as appropriate to skills related to the position, • Utilizes scheduler on eCR to maintain required expectations both fiscally and programmatically, • Coordinates and facilitates an initial meeting with Guests when they arrive at the program, • Obtains and communicates personal information regarding youth and family from referral source, • Cooperates and collaborates with program staff, volunteers and other agency staff; both internal and external to the agency, • Check and respond to e-mail and phone calls within 24 hours POSITION SPECIFICS: Education: • High School Diploma, GED, or equivalent experience in lieu of education required Experience: • Flexible and adaptive to the work environment., • Ability to engage, plan, communicate, and understand mental health challenges, co-occurring disorders and developmental challenges, • Availability to work afternoon, evenings 3pm -11pm, weekends 3-11pm, • Proficient with Microsoft Office, • Proficient in Electronic Client Record Systems preferred. Other: • Working knowledge of the Functional Behavioral Approach, Skill Building, Sanctuary, Therapeutic Crisis Intervention and Child and Family Team Process preferred., • Effective and open communication, emotional intelligence, and interpersonal skills., • Ability to work in partnership with others, including staff members across all departments., • Strong problem solving skills and ability to manage multiple projects and prioritize., • Organized and self-directed; team player – able to share information and collaborate effectively across all functions, and with both internal and external partners. Physical Demands: The following lists physical demands an employee will perform on a regular basis: standing, walking, sitting, bending, stooping, squatting, kneeling and climbing stairs. • Ability to walk short distances, • Ability to use stairs, • Ability to leave a location quickly COMPETENCIES: Leading Self • Character and Courage (Integrity and Trust)-, • Do the right thing, because it is the right thing, even when no one is looking. Truth to Power., • Customer Focus, • Build positive relationships through communication and collaborative problem solving., • Commitment to Diversity, Inclusion, Justice and Equity, • Believe in the dignity and humanity of all people to reach their full potential.