Trabajos ged en Rochester, New YorkCrear alertas

Job DescriptionPay: $32.00 - $40.00 per hourJob description:Requirements: • MUST have 3 years of verifiable experience., • MUST be able to pass a DOT physical., • MUST have knowledge of heavy duty electrical and after treatment diagnostic knowledge., • CDL preferred but not required. MUST possess a D-Class Driver’s License., • MUST be able to pass a pre-employment drug screening, background check, and MVR check will be completed by insurance company., • Interview will include detailed questions and scenarios for verification of mechanical knowledge., • Maintenance on Fleet as neededWe offer:, • Ample opportunity to earn extra money via overtime and on-call compensation, • On-call hours are compensated with attractive commission rates, • Healthcare available the next month after hire with generous employer contribution, • Paid vacation and sick time, • 401K fully vested after 6 months of employment, • Supplemental/Accidental insurance available, • Newer fleet of service trucks, • Top-of-the-line computer diagnostic equipment, • Principals only. Recruiters, please don't contact this job poster., • Do NOT contact us with unsolicited services or offersBenefit Conditions:, • Only full-time employees eligibleThis Job Is:, • A job for which military experienced candidates are encouraged to apply, • Open to applicants who do not have a high school diploma/GED, • A “Fair Chance” job (you or the employer follow Fair Chance hiring practices when performing background checks), • A good fit for applicants with gaps in their resume, or who have been out of the workforce for the past 6 months or more, • Open to applicants who do not have a college diplomaWork Remotely, • NoBenefits:, • 401(k), • Dental insurance, • Flexible schedule, • Health insurance, • Paid time off, • Vision insuranceEducation:, • High school or equivalent (Required)Experience:, • Heavy diesel repair: 3 years (Required)

Job Description Overview The Diesel Technician maintains diesel equipment, completes inspections and preventive maintenance requirements, corrects vehicle deficiencies, completes adjustments and alignments, and maintains records to ensure we are able to keep our level of commitment to safety and customer service. Hiring Range: Master Technician - $43-50 per hour Hiring Bonus: Master Technician- $10,000 Technicians at Casella participate in a Career Pathways Program that offers exceptional Advancement Opportunity and Regular Merit Increases. Medical, Dental, Vision, Life & Disability Insurance, Flexible Spending Accounts, Discounted Stock Program, 401K, Boot & Clothing Allowance, Wellness Incentive, Tuition Assistance, and More. #INDSJ Responsibilities • Performs all job duties in accordance with company safety policies and regulations., • Performs maintenance tasks based on driver pre and post trip inspections in a timely manner or as directed by maintenance manager., • Maintains diesel equipment operation by completing inspections and preventative maintenance requirements and makes appropriate corrections when needed., • Works in adverse conditions at times including heat, cold, wind, rain and snow to repair equipment and vehicles., • Builds and assembles machines or mechanical components according to requirements., • Troubleshoots reported problems and resolve them in a timely manner., • Maintains all relevant records for all work and procedures and reports on issues., • Performs accurate lockout/tagout procedures., • Runs diagnostic tests on vehicles and analyzes the results to problem solve; test drive vehicles to diagnose malfunctions when necessary., • Perform any and all necessary procedures to ensure maximum reliability and the safety of the equipment operator including, performing preventative maintenance inspections, tire changes, changes of breaks and any other utilities that are part of the vehicle; builds, rebuilds, and replaces hydraulic components and hoses of any vehicle or stationary equipment., • Participates in training and other learning opportunities to expand knowledge of the company, products, sales and services and performs any other duties needed to help drive our vision, fulfill our mission, and/or abide by our core values. Career Path Definitions & Distinctions Technician Apprentice: Demonstrates the ability to work alongside a knowledgeable Casella Waste Diesel Technician to learn and further develop skills. The Apprentice provides maintenance, repairs vehicles and equipment, and mainly focuses on preventative maintenance and maintaining the safety of all vehicles and equipment. Technician B: Demonstrates the ability to identify operating issues including examining, test driving and troubleshooting electrical and mechanical problems using standard testing procedures and computer diagnostic equipment. Technician also demonstrates the ability to correct any operating issues that are found. Technician A: Demonstrates the ability to inspect, troubleshoot, and repair vehicle brakes, suspension, steering, tires, rims, hubs, PTO, hydraulics, engine, cooling, starting, ignition, charging, lighting systems, fuel and air intake systems, heating, ventilation, and cooling systems to ensure vehicles are in safe and dependable operating condition. Master Technician: Demonstrates the ability to inspect, troubleshoot, and repair all vehicle and equipment systems. Can rebuild and replace engines, engine components, transmissions, drive line and rear-ends, mechanical systems, electrical systems, and hydraulic components. Qualifications The successful candidate will have a High School Diploma or GED, must be at least 18 years of age, hold a valid Class A, B, or C Driver’s license and must be legally eligible to work in the United States. The candidate must have a minimum of 1-year experience inspecting, troubleshooting, and repairing trucks and stationary equipment. Excellent verbal and written communication skills, effective listening and problem-solving skills, and dedication to providing excellent customer service is desired. It is also important that the candidate has demonstrated the ability to work as part of a team in a collaborative environment. Ability to perform physically demanding tasks including frequent lifting of heavy components, pushing, pulling, crouching, climbing and consistent standing, walking and grasping. This job operators in both, garage/shop conditions, and outside of the shop which may include various weather conditions. This position requires successful completion of pre-employment testing, including a drug screen.

Job Description Overview The Diesel Technician Apprentice works alongside a knowledgeable Casella Waste Diesel Technician to learn and further develop skills. The Apprentice provides maintenance, repairs vehicles and equipment, and mainly focuses on preventative maintenance and maintaining the safety of all vehicles and equipment. The Diesel Technician Apprentice will continue in this role until they compete all training requirements. Responsibilities • Gains an understanding of basic parts, processes, and maintenance techniques as instructed by knowledgeable technicians., • Learns how to complete all work orders, perform maintenance tasks based on driver pre and post trip inspections in a timely manner., • Performs all job duties in accordance with company safety policies and regulations to ensure safe operations., • Assists senior level technicians in performing preventative Maintenance Inspections., • Aids senior level technicians on larger projects., • Learns how to thoroughly identify defects requiring correction, which would affect the availability of the equipment and the safety of the equipment operator., • Adjusts brakes, clutches, and other utilities that are part of the vehicle or other equipment., • Adjusts hydraulic pressures and other hydraulic components of any equipment., • Performs tire changes and repairs on vehicles and equipment., • Builds, rebuilds or replaces hydraulic components and hoses of any vehicle or stationary equipment., • Learns how to perform accurate lockout/tagout procedures., • Participates in training and other learning opportunities to expand knowledge of the company, products, sales and services and performs any other duties needed to help drive our vision, fulfill our mission, and/or abide by our core values. Career Path Definitions & Distinctions Technician Apprentice: Demonstrates the ability to work alongside a knowledgeable Casella Waste Diesel Technician to learn and further develop skills. The Apprentice provides maintenance, repairs vehicles and equipment, and mainly focuses on preventative maintenance and maintaining the safety of all vehicles and equipment. Technician B: Demonstrates the ability to identify operating issues including examining, test driving and troubleshooting electrical and mechanical problems using standard testing procedures and computer diagnostic equipment. Technician also demonstrates the ability to correct any operating issues that are found. Technician A: Demonstrates the ability to inspect, troubleshoot, and repair vehicle brakes, suspension, steering, tires, rims, hubs, PTO, hydraulics, engine, cooling, starting, ignition, charging, lighting systems, fuel and air intake systems, heating, ventilation, and cooling systems to ensure vehicles are in safe and dependable operating condition. Master Technician: Demonstrates the ability to inspect, troubleshoot, and repair all vehicle and equipment systems. Can rebuild and replace engines, engine components, transmissions, drive line and rear-ends, mechanical systems, electrical systems, and hydraulic components. Qualifications The successful candidate will have a High School Diploma or GED, must be at least 18 years of age, hold a valid Class A, B, or C Driver’s license, have a basic knowledge or experience in automotive, diesel or heavy equipment diagnostics and repair and must be legally eligible to work in the United States. Excellent verbal and written communication skills, effective listening and problem-solving skills, and dedication to providing excellent customer service is desired. It is also important that the candidate has demonstrated the ability to work as part of a team in a collaborative environment. Ability to perform physically demanding tasks including frequent lifting of heavy components, pushing, pulling, crouching, climbing and consistent standing, walking and grasping. This job operators in both, garage/shop conditions, and outside of the shop which may include various weather conditions This position requires successful completion of pre-employment testing, including a drug screen.

Job Description Overview The Lead Diesel Technician performs major mechanical repairs with minimal supervision to ensure proper performance and safety of vehicles and equipment; makes all repairs in a safe, cost effective and time efficient manner. The Lead Technician will prioritize, delegate, train and instruct other technicians to ensure repairs are being done in a safe manner and is responsible for active participation in the company’s progress with the career paths program and help technicians to move up in their careers. Hiring Range: $38-50 per hour Up to $10,000 Hiring Bonus Medical, Dental, Vision, Life & Disability Insurance, Flexible Spending Accounts, Discounted Stock Program, 401K, Boot & Clothing Allowance, Wellness Incentive, Tuition Assistance, and More. #INDSJ Responsibilities • Schedules, implements, and maintains a preventative Maintenance program for all vehicles and equipment at the division., • Directs, trains, and oversees technicians to ensure all jobs are done with safety as a top priority., • Ensures optimum performance and productivity in every vehicle, perform and/or direct the performance of adjustments, inspection or rebuild of all mechanical components and systems at the division., • Guarantees complete and accurate documentation of vehicle repair and maintenance history by establishing and maintaining Transman program for every vehicle., • Performs regular and ongoing operational analysis to maximize utilization of company resources and correct any deficiencies immediately., • Assures full DOT compliance for equipment maintenance., • Establishes and maintains a high level of professionalism throughout the maintenance facility., • Coordinates maintenance activities with associated departments to maximize customer satisfaction and efficient equipment usage., • Works with division manager to establish a personal development plan for technicians., • Demonstrates effective leadership skills by following all applicable federal, state and company policies, communicating clear goals, coaching team members on achieving goals, providing development opportunities to ensure employees attain the necessary skills to obtain results, organizing team initiatives., • Participates in training and other learning opportunities to expand knowledge of the company, products, sales and services and performs any other duties needed to help drive our vision, fulfill our mission, and/or abide by our core values. Career Path Definitions & Distinctions Technician Apprentice: Demonstrates the ability to work alongside a knowledgeable Casella Waste Diesel Technician to learn and further develop skills. The Apprentice provides maintenance, repairs vehicles and equipment, and mainly focuses on preventative maintenance and maintaining the safety of all vehicles and equipment. Technician B: Demonstrates the ability to identify operating issues including examining, test driving and troubleshooting electrical and mechanical problems using standard testing procedures and computer diagnostic equipment. Technician also demonstrates the ability to correct any operating issues that are found. Technician A: Demonstrates the ability to inspect, troubleshoot, and repair vehicle brakes, suspension, steering, tires, rims, hubs, PTO, hydraulics, engine, cooling, starting, ignition, charging, lighting systems, fuel and air intake systems, heating, ventilation, and cooling systems to ensure vehicles are in safe and dependable operating condition. Master Technician: Demonstrates the ability to inspect, troubleshoot, and repair all vehicle and equipment systems. Can rebuild and replace engines, engine components, transmissions, drive line and rear-ends, mechanical systems, electrical systems, and hydraulic components. Qualifications The successful candidate will have a High School Diploma or GED, must be at least 18 years of age, hold a valid CDL Class B with an air brake endorsement, have an OSHA 10 or 30 card, have a 1-year clean CDL Driving experience, and must be legally eligible to work in the United States. Outstanding relationship management skills, excellent verbal and written communication skills, exceptional listening and problem-solving skills, and dedication to providing excellent customer service are desired. It is also important that the candidate has demonstrated the ability to work as part of a team in a collaborative environment as well as the ability to teach and train others. Ability to perform physically demanding tasks including frequent lifting of heavy components, pushing, pulling, crouching, climbing and consistent standing, walking and grasping. This job operators in both, garage/shop conditions, and outside of the shop which may include various weather conditions

Are you a high energy, passionate retail leader who is looking for the next step in their career? Are you someone who loves to help others and work as part of a team? Do you thrive in fast-paced environments and have previous experience in retail, food service or restaurant management? Do you like discounts on gas and free coffee? Then you may be the perfect addition to our team! What We Offer: • Competitive Wages, • Professional Structured Training program, • Work today, get paid tomorrow through our earned wage access program*, • Paid Time Off, • Medical/Health/Dental Coverage, • 401K with Company Match, • Team Member Discounts, • Tuition Reimbursement, • Employee Assistance Program, • Health Savings Account, • Company Spirit Days, • And much more! Managers In Training will learn how to successfully manage the day to day responsibilities of running a Fastrac convenience store location from our finest leaders. You can expect to spend time with a Training Manager and Supervising Manager during your training, working various shifts to learn about our company, our retail team, our vendors and our guests. This role supports the Store Manager and other team members in delivering an exceptional guest shopping experience. Training Process: During official training weeks, Managers In Training work alongside Training Managers, gaining insight and best practices for managing a convenience store location. During supervisory weeks (in between training weeks) Managers In Training work a variety of shifts, alongside team members, putting their leadership training to practice. After training, Managers In Training become part of our bench leadership team, helping to fill in during absences until assigned to their own store. Looking for growth opportunities? Our parent company, Cumberland Farms, operates nearly 1500 locations across the United State, so there are always opportunities for you to move up the ladder! What you’ll do: • Greet Guests with a warm welcome and a smile! After all, we are known for delivering exceptional Customer Service!, • Assist Store Manager with building and developing a strong store team: training, scheduling, and coaching team members. Act as a leader within the team by setting clear and measurable goals, holding self and others accountable, and communicating frequently and effectively., • Monitor product levels on the sales floor, rotating stock and keeping product levels full. Our guests’ count on us to be 100% in-stock at all times., • Oversee quality control, merchandising, & food safety programs in locations that offer hot food., • We love to keep a clean store. We work as a team to maintain the overall appearance and cleanliness of both interior and exterior of the store. Ensuring that the coffee station is clean and stocked; the food service area is spotless and the bathrooms are sparkling clean! You will help by delegating and completing these tasks as necessary., • Operate the cash register in an efficient manner, • In locations that offer hot food - Assist the Store Manager by overseeing quality control, merchandising, safety programs and other guidelines in place for successful food service operation. Perform other duties as assigned at the discretion of the Store Manager or District Manager. Our doors are always open to our guests, rain or shine and on weekends & holidays. Each Team Member contributes to delivering the best experience to our Guests by participating in all parts of the job. At Fastrac, it’s important that our employees reflect the world we live in and the communities we serve. We celebrate our differences, so your unique background and skillset could bring a wonderful new perspective to our team. If you have a passion for delivering exceptional Customer Service and have a strong retail management background, then we'd love to meet you. The rest can be taught! Minimum Education: High School or GED Preferred Education: Minimum Experience: 1 year retail or food experience Preferred Experience: 1 year in retail, guest service or restaurant, in a leadership role Preferred Licenses/Certifications and Skills: ServSafe /Food Safety certification a plus but not mandatory Soft Skills: • Comfortable talking and interacting with guests and team members, • High energy, • Ability to move from one activity to another quickly, • Team oriented; willing to give extra effort to help others, • Computer skills are helpful Scheduling: This position is full-time and involves working a variety of hours, day and night, as Fastrac locations can be open 24 hours depending on the store. Weekend & Holiday hours are required. Hours & Conditions: Full-time – 40 regular hours maximum with 5 hours overtime required Travel: 5%. Ability to deliver deposits to the bank independently (where applicable) and have own vehicle to do so. Physical Requirements: Ability to maneuver and regularly lift and or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 40 pounds. Ability to stand/walk 8 hours a day; reach overhead, bend, squat, twist, reach, grasp and grip and work in cooler (cold temperatures). The noise level in the work environment is usually moderate. Other: Specialized attire required in food establishments (hats or visors, gloves etc. provided)

Job Description ???? Join a Legacy of Excellence and Innovation - Now Hiring Service Technicians at Turnbull Heatingl! ???? Position Title: Commercial HVAC Service Technician Company Name: Turnbull Heating Air Pay Range: $70,000 - $135,000 per year + Performance Bonuses & Year-End Bonus Industry: Commercial HVAC / Refrigeration Location: Rochester, Buffalo, and Syracuse, NY Job Overview Turnbull Heating Air is seeking high-performance Commercial HVAC Service Technicians to join our team of dedicated professionals. If you thrive in an environment that values technical excellence, safety, and specialization in commercial HVACR systems, this is your opportunity to build a fulfilling and respected career. In this role, you'll troubleshoot, repair, and maintain commercial heating, cooling, and refrigeration systems while upholding the highest standards of safety, integrity, and professionalism. Who We Are Turnbull Heating Air is your trusted HVAC partner serving Rochester, Buffalo, and Syracuse, NY. We are a premier commercial HVAC and refrigeration service provider committed to delivering superior quality, safety, and customer satisfaction. Our mission is to set the industry standard in technical excellence while fostering a workplace culture defined by integrity, innovation, respect, and sustainability. At Turnbull Heating Air, we believe in providing value through specialization. We are focused solely on the commercial HVACR sector, ensuring that every technician and team member has the tools, training, and support to perform at the highest level. Our vision is to create a professional environment where individuals can do the best work of their lives and be recognized for their contributions. Key Responsibilities • Troubleshoot, diagnose, and repair commercial heating, cooling, and refrigeration systems., • Perform routine maintenance and inspections to ensure optimal system performance., • Accurately document service work, including labor, materials used, and customer communications., • Communicate clearly with customers to explain issues, options, and recommendations., • Uphold cleanliness, organization, and professionalism on job sites., • Participate in the on-call rotation for emergency services., • Coordinate effectively with dispatch, team members, and customers to ensure smooth operations., • Follow all safety protocols and maintain applicable certifications. Qualifications • 3+ years of HVAC service experience preferred., • High school diploma or GED required., • Valid NYS Driver's License and clean driving record., • EPA 608 Certification required., • OSHA 10 Certification preferred., • Excellent communication and customer service skills., • Strong troubleshooting abilities and mechanical aptitude., • Able to work independently and as part of a team., • Organized, dependable, and committed to continuous learning. Benefits • Health & Wellness:, • Medical, Dental, Vision, • HSA, • Life & Disability Insurance, • Safety Equipment Provided, • Wellness Programs, • Career Development:, • Paid Training & Certifications, • Apprenticeship / Mentor Program, • Tool Replacement Program, • Tech Package (tablet/smartphone), • Work-Life Balance:, • PTO (Vacation, Sick, Holidays), • Paid Parental Leave, • Child Care Assistance, • Volunteer Time Off, • Relocation Assistance, • Compensation:, • Retirement Savings Plan, • Weekly Pay, • Profit Sharing, • Tuition Reimbursement, • Referral Bonus Program, • Perks:, • Company Events, • Uniforms Provided, • Company Vehicle, • Mileage Reimbursement, • Rewards & Prizes, • Sales Contests, • Charity Alignment Schedule • Full-Time, • Monday - Friday, • On-Call Rotation Required, • Occasional Weekend and Overtime Work Location • On-site commercial HVAC and refrigeration service throughout Rochester, Buffalo, and Syracuse, NY. Equal Employment Opportunity Statement We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status. Ready to elevate your HVAC career with a company that values specialization, safety, and integrity? Apply today and become part of the Turnbull Heating Air team. ???? Visit our website to learn more. #FC25

Job Description ???? Join a Legacy of Comfort and Quality - Now Hiring Service Technicians at Turnbull Heating Air! ???? Position Title: Residential HVAC Service Technician Company Name: Turnbull Heating Air Pay Range: $70,000 - $130,000 per year + Performance Bonuses & Year-End Bonus Industry: Residential HVAC / Mechanical Location: Rochester, NY Job Overview Turnbull Heating Air is seeking high-performance Service Technicians to join our elite team of HVAC professionals. If you're passionate about delivering top-tier service, committed to continuous improvement, and thrive in a team of specialists focused exclusively on home comfort, this is your opportunity to build a rewarding and respected career. In this role, you'll troubleshoot, repair, and maintain residential HVAC systems with an emphasis on excellence, professionalism, and customer satisfaction. Who We Are Turnbull Heating Air is a locally owned, family-operated company with deep roots in the HVAC industry and a sterling reputation throughout our community. Unlike others, we specialize only in HVAC, delivering unmatched quality for homeowners who value comfort, efficiency, and trustworthy service. Our team is made up of dedicated high-performers who take pride in their craft and in the company they represent. We're not just offering a job-we're offering a long-term career path, support for your professional growth, and a culture where you'll feel truly valued. Key Responsibilities • Troubleshoot, diagnose, and repair residential heating and cooling systems., • Perform scheduled maintenance and system inspections to ensure proper operation., • Accurately document service activities, materials used, and customer interactions., • Communicate clearly with customers regarding system status, repair options, and recommendations., • Maintain high standards of cleanliness and professionalism on every job site., • Participate in on-call rotation for emergency service calls., • Collaborate with coworkers and dispatch team to ensure efficient service routes and customer satisfaction., • Follow all safety procedures and maintain required safety certifications. Qualifications • 3+ years of HVAC service experience preferred., • High school diploma or GED required., • Valid NYS Driver's License (clean driving record)., • EPA 608 Certification required., • OSHA 10 Certification preferred., • Strong customer service, communication, and problem-solving skills., • Ability to work independently and as part of a team., • Detail-oriented, reliable, and organized. Benefits • Health & Wellness: Medical, Dental, Vision, HSA, Life and Disability Insurance, Safety Equipment Provided, Wellness Programs, • Career Development: Paid Training & Certifications, Apprenticeship/Mentor Program, Personal Tool Replacement Program, Tech Package (tablet/smartphone), • Work-Life Balance: PTO (Vacation, Sick, Holidays), Paid Parental Leave, Child Care Assistance, Relocation Assistance, Volunteer Time Off, • Compensation: Retirement Savings Plan, Weekly Pay, Profit Sharing, Referral Bonus Program, Tuition Reimbursement, • Perks: Company Events, Uniforms Provided, Company Vehicle, Mileage Reimbursement, Rewards & Prizes, Sales Contests, Charity Alignment, • This position guarantees a minimum of 35 work hours per week. Schedule • Full-Time, • Monday - Friday, • Occasional On-Call, • Overtime and weekend availability as needed Location • On-site residential HVAC service across the local community Equal Employment Opportunity Statement We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status. Ready to take your HVAC career to the next level? Apply now and join a team that values expertise, integrity, and excellence. #FC25

Job Description Position Summary: Act as a representative in disseminating information concerning Parking & Transportation at the University of Rochester to the community & visitors. Provide services and conduct transactions that ensure the effective and efficient implementation of University policies related to parking, traffic, and circulation. Act as University host to visitors. Move vehicles in valet parking & 3D Parking. Jump start vehicles and do tire inflates. Excellent interpersonal, communication & customer service skills expected. Qualifications: A clean, valid NYS driver’s license is preferred (no more than two moving violations and accidents in the same year and no more than three within three years.), drug test is mandatory due to driving vehicles, and a police background check will be done. Non-physical required with Hep B shot due to customer/patient contact. Minimum high school diploma or GED required

Job Description Boiler / Refrigeration Operator Location: Rochester, NY (on-site) Schedule: 12-hour rotating shift (8-week rotation): 2 days (6:00am– 6:00pm), 2 nights (6:00pm–6:00am), then 4 days off Direct Hire Pay: $25–$43/hr About the role Join a large industrial utilities team supporting a well-established multi-building manufacturing/industrial campus in Rochester. You will operate and maintain industrial boilers, steam distribution, compressed air, industrial water systems, and refrigeration/water treatment equipment. Working hands-on in the plant and monitoring/adjusting systems through a DCS. What you’ll do • Perform routine inspections of boiler room, refrigeration, and water treatment systems; document operating data; adjust controls as needed, • Operate/monitor boilers, turbines, water treatment plant, and distribution systems in coordination with shift operations teams, • Support repairs on equipment and distribution piping as needed, • Sample/test chemical treatment systems and unload bulk chemicals, • Support shutdowns/startups, including lockout/tagout (LO/TO), • Maintain equipment housekeeping and operability, • Help develop/update standard operating procedures, • Perform maintenance tasks as needed (refrigerant handling, leak repair, pump packing adjustments, etc.), • Support overhead distribution piping systems, • Complete required recordkeeping/inspections and follow all safety protocols What we’re looking for • High school diploma or GED, • 2+ years in an operator/mechanic role (industrial environment preferred), • Working knowledge helpful in: refrigeration systems, cooling towers, water treatment, piping systems, building structures, steam turbines, • Strong communication skills; able to work across all levels of an organization, • Proficient with MS Office, • Ability to learn industrial software quickly (examples used on site may include CMMS, compliance/tagging tools, DCS/HMI platforms, and historian software; expected ramp-up ~3–4 months), • Valid driver’s license with proof of insurance Licensing / certifications (must obtain after hire) • City of Rochester S-3 Stationary Engineer License within 14 months, • City of Rochester R-4 Refrigeration Operator License within 18 months, • NYSDOH 2a Water Treatment Operator certification within 16 months, • US EPA Universal Refrigerant Handling certification within 12 months Work environment & physical requirements • Work in hot/cold ambient conditions at times; moderate plant noise levels, • Travel between buildings on a large industrial campus; appropriate PPE required, • Occasional bending/walking/carrying equipment; must be able to lift up to 50 lbs, • Must be able to work the rotating shift schedule described above System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. \nCompany Description System One is a leading provider of specialized, highly technical services and solutions to critical infrastructure, technology, life sciences, and government sectors. We partner with large private and public organizations who trust us to execute their complex, mission-critical initiatives through our outsourced services and workforce solutions. System One is a leading provider of specialized, highly technical services and solutions to critical infrastructure, technology, life sciences, and government sectors. We partner with large private and public organizations who trust us to execute their complex, mission-critical initiatives through our outsourced services and workforce solutions.

Job Description Job Title: Packaging Technician Reports To: Packaging Supervisor Hourly Rate: $18.00 Location: 350 Buell Rd., Rochester, NY 14624Position OverviewThe Packaging Technician is responsible for the safe, accurate, and efficient packaging and labeling of food-grade cannabis products. This role requires maintaining cleanliness, ensuring quality and consistency, and following Good Manufacturing Practices (GMP). The Packaging Technician will support the packaging department by maintaining proper records, assisting with inventory management, and performing other tasks as assigned by management.Essential Duties and Responsibilities• Package and label cannabis products in accordance with company protocols and training.• Accurately label all packaging to ensure regulatory and brand compliance.• Fulfill production and sales orders efficiently and with high attention to detail.• Ensure packaging meets established quality and quantity standards.• Maintain accurate counts of inventory and assist in tracking raw materials, packaged goods, and fulfilled orders.• Move product inventory safely between work areas.• Keep workstations organized, sanitized, and compliant with safety and sanitation standards.• Track and dispose of waste material in accordance with company procedures.• Comply with all biosecurity and hygiene measures within the facility.• Maintain up-to-date knowledge of state regulations, compliance requirements, and company SOPs.• Participate in required training and professional development activities.• Support other departments and tasks as needed, demonstrating flexibility and teamwork.• Maintain consistent attendance and punctuality.• Adhere to all company policies, procedures, and safety protocols.Minimum Qualifications• High School Diploma or GED required.• Minimum of 1 year of experience in a manufacturing or packaging role with a focus on product safety, quality, and compliance.• Familiarity with FDA, GMP, HACCP, OSHA standards (preferred).• Ability to wear all required PPE, including bump cap, hairnet, earplugs, beard net (if applicable), gloves, safety glasses, and slip-resistant shoes.• Basic computer literacy and math skills.• Strong communication skills and attention to detail.• Dependable with a strong work ethic and willingness to learn.• Ability to perform repetitive tasks for extended periods of time.• Ability to push, pull, or lift up to 50 lbs.• Must have reliable transportation.Working Conditions and Physical Requirements• Exposure to environmental elements including dust, fumes, temperature extremes, humidity, and noise.• Exposure to physical risks involving mechanical, chemical, and electrical hazards.• Requires standing, walking, bending, kneeling, reaching, and lifting throughout the shift.• Must be able to lift and carry up to 50 pounds.• Must be able to use fine motor skills and perform detailed, repetitive tasks.• Frequent interaction with team members, supervisors, and vendors, requiring professional communication and etiquette.• High stress tolerance and adaptability in a fast-paced, changing environment.Expectations• Embody and uphold the company's Core Values of People, Quality, and Growth.• Flexibly support other areas of the facility as needed.• Complete all required training on schedule.• Maintain full compliance with company policies and procedures.Equal Opportunity Employer The company is proud to be an Equal Opportunity Employer and complies with all applicable ADA regulations.

Job Description Job Title: Repair Table Operator/ Titulo profesional: Operador de Mesa de Reparación Division: General Labor / Division: Trabajo General Department: Operations / Departamento: Operaciones Reports To: Shift Supervisor / Reportar a: Supervisor de Turno Summary: Repairs pallets using quality specifications by performing the following duties. Resumen: Reparar las paletas utilizando las especificaciones de calidad mediante la realización de las siguientes funciones: Duties and Responsibilities include the following. Other duties may be assigned. Funciones y Responsabilidades incluyen lo siguiente. Otras funciones pueden ser asignadas. 1. Operates repair equipment per standard operating procedures.* Operar equipo de reparación de acuerdo con los procedimientos operativos estandar.* 1. Meets production quotas within a reasonable training/retraining time period.* Cumplir con las cuotas de producción dentro de un entrenamiento razonable/ periodo de tiempo para re-entrenamiento.* 1. Ensures housekeeping of equipment and surrounding area is acceptable per standard operating procedure.* Asegurar la limpieza de los equipos y el área de los alrededores es aceptable por procedimiento operativo estándar.* 1. Follows safety standard operating procedures and maintain proper use of all personal protective equipment at all time of operation.* Seguir los procedimientos operativos de seguridad estándar y mantener el uso correcto de todos los equipos personales de protección en todo momento de la operación.* 1. Generates accurate production reporting for supervisor.* Generar informes de producción precisos para el supervisor.* 1. Maintains possession and good condition of assigned tools and nails.* Mantener posesión y la buena condición de herramientas y clavos asignados.* 1. Alerts supervisor of potential maintenance and/or safety concerns.* Alertar al supervisor de problemas potenciales de mantenimiento y/o de seguridad.* 1. Receives and follows designated job processes and safety trainings.* Recibir y seguir procesos designados de trabajo y entrenamiento de seguridad.* 1. Performs assigned preventive maintenance of equipment.* Llevar a cabo el mantenimiento preventivo de los equipos asignados.* 1. Performs other related duties as assigned. Realizar otras tareas afines que le sean asignadas.* Qualifications: / Cualificaciones To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Para realizar este trabajo con éxito, un individuo debe ser capaz de realizar cada función esencial satisfactoriamente. Los requisitos enumerados a continuación son representativos de los conocimientos, destrezas y/o la habilidad necesaria. Adaptaciones razonables se pueden hacer para permitir a las personas con discapacidad llevar a cabo las funciones esenciales. Language Ability: / Habilidad de Lenguaje: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Habilidad para leer y comprender instrucciones simples, correspondencia corta, y notas. Habilidad para escribir correspondencia simple. Habilidad para presentar con eficacia la información en uno – a – uno y grupos pequeños de situaciones para los clientes, clientes y otros empleados de la organización. Math Ability: /Habilidad de las Matemáticas: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Habilidad para sumar, restar, multiplicar, y dividir en todas las unidades de medida, usando números enteros, fracciones comunes, y decimales. Habilidad para calcular tarifas, relación, y el porcentaje y dibujar e interpretar graficas de barras. Reasoning Ability: / Habilidad de Razonamiento: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Habilidad para aplicar sentido común y el entendimiento para llevar a cabo detallado pero no involucrado instrucciones escritas u oral. Habilidad para bregar con problemas envolviendo algunas variables concretas y situaciones estandarizadas. Education/Experience: / Educacion/ Experiencia: High school diploma or general education degree (GED); or equivalent combination of education and experience. Diploma de Escuela Secundaria o un grado en educación general (GED); o una combinación equivalente de educación y experiencia. Equipment: / Equipo: • Hammer / Martillo, • Nail gun / Pistola de clavos, • Sawzall / Sawzall, • Screw gun / Pistola de tornillos Physical Demands: / Demandas Físicas: *Essential Function © 2016 Millwood, Inc. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands, and reach with hands and arms. The employee is frequently required to walk and talk or hear. The employee is occasionally required to stoop, kneel, crouch or crawl. The employee must regularly lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, and ability to see color. Las demandas físicas descritas aquí son representativas de las que se deben cumplir por un empleado para realizar con éxito las funciones esenciales de este trabajo. Adaptaciones razonables se pueden hacer para permitir a las personas con discapacidad realizar las funciones esenciales. Mientras desempeñan los deberes del trabajo, se requiere regularmente del empleado pararse, usar las manos y alcanzar con los brazos y manos. Con frecuencia se requiere del empleado caminar, y hablar o escuchar. Se requiere del empleado ocasionalmente agacharse, arrodillarse, agacharse o arrastrarse. El empleado debe levantar regularmente y/ o mover hasta 75 libras. Habilidades específicas de visión requeridas para este trabajo incluye visión cerca, la visión de lejos, visión periférica, y la habilidad para ver el color. Work Environment: / Ambiente de Trabajo: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. The employee is frequently exposed to fumes or airborne particles. The employee is occasionally exposed to wet or humid conditions (non-weather), outdoor weather conditions, extreme cold (non-weather), and extreme heat (non-weather). Las características del ambiente de trabajo que se describen aquí son representativas de las que un empleado encuentra en el desempeño de las funciones esenciales de este trabajo. Adaptaciones razonables se pueden hacer para permitir a las personas con discapacidad realizar las funciones esenciales. Mientras desempeñan los deberes del trabajo, el empleado es expuesto regularmente a trabajar cerca de partes mecánicas en movimiento. El empleado es expuesto frecuentemente a gases o partículas en el aire. El empleado es ocasionalmente expuesto a condiciones húmedas o mojadas (no el clima), condiciones climáticas externas, extremadamente frio (no el clima), y el calor extremo (no el clima). The noise level in the work environment is usually loud. El nivel de ruido en el ambiente del trabajo es usualmente alto.

Job DescriptionPosition Summary The Production Assembler is responsible for assembling HVAC equipment and components according to engineering specifications, production schedules, and quality standards. This role requires attention to detail, the ability to safely use hand and power tools, and a commitment to producing high-quality products in a fast-paced manufacturing environment. We are proud to foster a positive, team-oriented culture built on integrity, respect, accountability, and continuous improvement. We value employees who take pride in their work, support one another, and contribute to our shared success. In return, we offer a competitive compensation and benefits package, opportunities for professional growth and advancement, and a workplace where employees are recognized for their contributions and encouraged to build long-term careers. Some of the benefits that offered at Northern Air medical, dental and vision insurance, PTO, paid holidays, employee referral bonus, monthly production bonus, 401k matching, and more! Key Responsibilities • Assemble HVAC units, subassemblies, and components using hand tools, power tools, and production equipment., • Read and interpret work instructions, assembly drawings, blueprints, and specifications., • Install mechanical and electrical components, including wiring, motors, fans, coils, compressors, and controls as required., • Inspect parts and completed assemblies to ensure compliance with quality standards and specifications., • Identify and report defective materials, equipment issues, or production concerns to supervisors., • Perform functional testing and basic troubleshooting of assembled products when required., • Maintain a clean, organized, and safe work area following 5S and company safety practices., • Meet daily production goals while maintaining quality and efficiency., • Accurately complete production documentation and quality records., • Follow all company policies, safety procedures, and manufacturing processes., • Assist with continuous improvement initiatives to increase productivity and reduce waste., • Cross-train in multiple assembly stations as needed.Qualifications, • High school diploma or GED preferred., • Previous manufacturing or assembly experience preferred; HVAC manufacturing experience is a plus., • Ability to read measuring devices, assembly instructions, and basic blueprints., • Mechanical aptitude and experience using hand and power tools., • Strong attention to detail and commitment to quality., • Ability to work independently and as part of a team., • Basic math and problem-solving skills.Physical Requirements, • Ability to stand, walk, bend, and reach for extended periods., • Frequently lift and carry up to 50 pounds., • Ability to perform repetitive motions using hands and arms., • Ability to work in a manufacturing environment with exposure to noise, dust, and varying temperatures., • Ability to wear required personal protective equipment (PPE).Preferred Skills, • Experience with HVAC equipment assembly or sheet metal fabrication., • Knowledge of lean manufacturing principles., • Experience using torque tools, pneumatic tools, and measuring instruments., • Forklift certification (preferred but not required).Success in This Role Successful Production Assemblers consistently produce quality work, follow safety procedures, meet production targets, work collaboratively with team members, and contribute to continuous improvement efforts.

Job Description Title Assembler Department Assembly Reports to Assembly Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Position Overview The Optical Assembler plays a critical role in the production of high-performance optical components and assemblies used in military systems, advanced imaging and sensing equipment. Many of the products built in this role support mission-critical equipment – including ruggedized optics, low-light imaging devices, and components integrated into defense, surveillance and field-deployed platforms. This position requires exceptional attention to detail, steady hands, and a disciplined approach to following technical work instructions. You will assemble, align, inspect and verify optical components that must perform reliably in demanding environments, from extreme temperatures to high-vibration field conditions. This role is ideal for someone who takes pride in craftsmanship, thrives in a clean, controlled manufacturing environment, and understands the responsibility of building components that professionals depend on in real-world operations. Key Responsibilities: • Assemble precision optical components and mechanical subassemblies using specialized tools and fixtures to meet daily production targets., • Performa fine alignment of optical elements using microscopes, interferometers and laser alignment systems., • Apply adhesives, epoxies and bonding agents with controlled volume and placement, following cure schedules and handling requirements., • Install mechanical fasteners to exact specifications to maintain optical alignment and structural integrity., • Inspect incoming and in-process optical components for defects such as scratches, digs, chips, coating issues and contamination., • Verify optical performance using test equipment such as interferometers, MTF benches, spectrophotometers and optical comparators., • Document inspection results and maintain traceability through travelers, routers, or ERP system., • Identify nonconformance's and collaborate with quality and manufacturing engineering to resolve issues., • Follow detailed work instructions, assembly drawings, and standard operating procedures (SOPs) with zero deviation., • Maintain cleanroom environment standards., • Record production data accurately, including lot numbers, serial numbers, material usage and process steps., • Support continuous improvement initiatives by providing feedback on tooling, processes, and documentation. Required Skills & Qualifications: • High School Diploma/GED Required., • 1–3 years of experience in a manufacturing environment, including hands-on assembly, micro-assembly, or similar precision work. Candidates with other precision, hands-on experience demonstrating strong attention to detail and manual dexterity will also be considered., • Strong manual dexterity and ability to work with small, delicate components under magnification., • Strong attention to detail, consistency, and process discipline., • Ability to read and interpret technical drawings, schematics, and work instructions, • Experience in optical assembly or working with precision optical components a plus., • Familiarity with optical handling, cleaning, and contamination-controlled practices., • Comfortable working in a cleanroom or controlled environment., • Experience with ISO 9001 quality systems a plus., • Familiarity with computers and ERP systems for recording production data. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match & tuition reimbursement opportunities., • Health, dental, vision & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Work Environment & Physical Demands • Work is performed in a cleanroom and manufacturing environment with exposure to moving equipment, moderate to loud noise, and materials such as oils, solvents, and cleaning agents, • Requires use of appropriate personal protective equipment, including safety glasses and cleanroom garments, • Position involves a combination of standing, walking, and sitting for extended periods, along with occasional stooping, kneeling, and reaching, • Frequent use of hands for handling and assembling small components requiring fine motor coordination and dexterity, • Sustained visual focus is required, including close-up and magnified work, with the ability to identify fine detail and adjust focus as needed, • Regular use of computers and standard assembly or inspection tools, • Ability to lift up to 50 lbs. as needed, • Work may shift between stations and may require schedule flexibility, including overtime or weekend work based on production needs Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. A Shift Schedule: Monday - Friday, 6am - 2:30pm B Shift: Mon - Fri 2pm - 10:30pm Training to be conducted on A shift for 2 - 4 weeks before transitioning to B shift schedule

Job Description We’re looking for a Production Operator I to join our growing team in West Henrietta, NY! Who we are: Safran Electronics & Defense is an international company with 10,000 employees, built on proven expertise in technologies that underpin sovereignty. By combining human and artificial intelligence, we develop the products and services that empower aerospace and defense players to observe, decide and guide, all over the world. Safran Electronics & Defense also supports fellow Safran companies by sharing its state-of-the-art electronics skills and expertise. Within Safran Electronics & Defense, our Timing & Synchronization division is the leader in R-PNT (Resilient Positioning, Navigation & Timing) solutions. We supply military and commercial industries worldwide with accurate timing technologies and equipment (Time Servers, Inertial Navigation System), as well as ultra-precise timing and frequency distribution for applications requiring a high degree of reliability and accuracy across IP time distribution standards. In this way, we contribute to the performance of critical operations support. Whenever accuracy, safety, security and reliability are critical, the solutions of Safran Electronics & Defense leads the way. The Position: As a Production Operator I, you will be responsible for the assembly of small to medium-sized components, including the fitting, alignment, and adjustment of interrelated parts. This role involves performing precision soldering of electronic and mechanical components, ensuring reliable connections and adherence to quality standards. You will also troubleshoot and repair sub-assemblies and major assemblies, maintain production efficiency, and follow detailed work instructions to meet safety and performance requirements. The Day to Day: • Utilize a wide range of hand and power tools, along with electrical and mechanical fixtures and gauges, to perform precision assembly tasks, • Operate standard measuring and test equipment such as dial indicators, micrometers, and voltmeters, • Work with drills, jigs, fixtures, and light materials to support production activities, • Perform precision soldering of electronic and mechanical components as required, • Inspect and test your own work to ensure it meets established specifications and quality standards, • Verify and review the work of others for accuracy and compliance, • Perform a variety of mechanical, optical, and electrical/electronic operations, • Follow detailed work instructions, safety protocols, and production procedures, • Maintain a clean, organized, and efficient work environment What you Bring to Safran: • High School Diploma or GED equivalent, • Minimum 3 years electronics assembly experience or equivalent with soldering experience on printed circuit boards, • Ability to solder/de-solder/rework assemblies/SMT experience, • IPC-610 & JStandard 001 (preferred), • Ability to read and follow directions with heavy attention to detail, • Able to use ERP system to complete tasks as required, • Able to read color coded Process Details, • Ability to utilize Microsoft Programs Visit our website for more information or check out our videos on YouTube At Safran Electronics & Defense, you’ll combine passion for your job with a quality work environment adapted to a good life balance. Benefit from a variety of opportunities to shape the career path that suits you: our leaders and technical experts are there to support you from your integration and career development, in France and abroad. Safran Trusted 4D, Inc is an equal opportunity employer who does not discriminate based on race, color, citizenship, religion, gender, sexual orientation, national origin, age, disability, veteran’s status or any protected category. We encourage veterans and people with disabilities to apply.

Job Description With over 50 years of excellence, Precise Tool & Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. Our 280,000 sq. ft. facility houses more than 160 CNC machines, including vertical turning lathes, horizontal boring mills, high-speed 5-axis machines, and more! We proudly support industries such as aerospace, defense, medical, energy, and power generation with a commitment to quality and innovation. At Precise Tool, we offer competitive pay, comprehensive benefits, and a collaborative work environment built on respect, teamwork, and long-term stability. Interested in joining our team? Apply today! JOB SUMMARY Under the direct supervision of the Engineering Manager, the Assembler is responsible for operating air guns, air drivers, hand tools, power tools, and the pallet jack ESSENTIAL FUNCTIONS Duties include, but are not limited to, the following: • Assembles products according to project specifications, including heli-coil installation, pin installation, and part marking., • Assists Shipping and Receiving with preparing the product for delivery., • Visually inspect parts and assembled pieces for defects and touches up paint finish as needed., • Move parts and materials between workstations to support production flow., • Promote and support the requirements and principles of the Precise Quality Management System and AS9100. KNOWLEDGE, SKILLS, AND ABILITIES • With a quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Ability to understand and carry out oral and written directives., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Thorough operational knowledge and skills of assembly equipment., • Ability to operate assigned equipment safely and efficiently., • Ability to keep record of time spent and material used., • Ability to accurately read and interpret blueprints, drawings, and work instructions., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. EDUCATION AND EXPERIENCE • High School Diploma or GED, • Minimum 2 years of relevant experience JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $19.00 - $22.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job Description Job Summary: Performs precision and intricate hand and machine assembly of finished product using equipment and methods. Essential Duties and Responsibilities: • Assembles complex components and inspects connections for correct tolerance and fit., • Fasten parts and subassemblies per specifications provided by customer., • Operates various assembly and packaging equipment including lathes, mills, sonic welders, hot stamper, heat stakers, auto baggers., • Will read and interpret customer prints and specifications., • Performs various types of machine and manual assembly., • Identifies and resolves assembly and packaging issues and notifies Floor Lead/Supervisor., • Inspects assembled parts for any imperfections as per customer specifications, may include software test., • Completes production reports daily to verify completed work that states the reasons for scrap and downtime. Additional Responsibilities: • When requested, may work on special projects and various related assignments., • May be required to compile various reports and data tracking., • May be required to work in various areas of operations when necessary., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee must have excellent hand/eye coordination, and able to handle a variety of size pieces. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 40 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • High school diploma or GED required, • Minimum 2 years experience in small parts assembly or equivalent job experience, • Ability to read and interpret blueprints, • Familiar with various trade tools, • Attention to detail, • Math skills, • Work independently with minimal supervision, • Familiar with basic computer operations

Job Description Job purpose Responsible for assembly and/or scanning of small or medium sized parts, fitting and/or adjustment of interrelated parts and/or assembly, adjustment and/or repair of sub-assemblies and major assemblies per process sheets. Could also be responsible for teardown, cleaning and reassemble of refurbs. Duties and responsibilities • Maintains proper quality and quantities of manufactured materials., • Operate small equipment such as presses, magnetizing/demagnetizing equipment, scanners., • Perform SPC on all related jobs as required., • Operate degreasing systems as required., • Able to set-up equipment where applicable., • Able to calibrate and zero equipment., • Perform preventative maintenance., • Use general measuring instruments, such as indicator, calipers, and height gages., • Rotate from one job to another if needed., • Maintain accurate documentation., • Follows all established company policies, • Follows all established safety procedures and precautions. Including filing incident/accident reports., • Notifies Supervisor of all unsafe/hazardous conditions or defective equipment., • Other duties as assigned Qualifications • High School Diploma/GED, • Be able to follow written and oral instructions., • Previous employed in a production environment helpful., • Able to communicate., • Math aptitude., • Mechanical capabilities helpful. Working conditions • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Plant wide climate control and air conditioning, • Could work in areas with excessive noise. NOTE: Ear protection available., • Certain jobs extremely dirty. NOTE: Smocks or work outfits provided. Physical requirements • Could require intermittent and long periods of sitting and/or standing., • Required to do repetitive work., • Periodic lifting of materials not to exceed 50 pounds. #ROC Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran Mon - Thurs: 5am - 3:30pm

Job Description Job Summary: Performs precision and intricate hand and machine assembly of finished product using equipment and methods. Essential Duties and Responsibilities: • Assembles complex components and inspects connections for correct tolerance and fit., • Fasten parts and subassemblies per specifications provided by customer., • Operates various assembly and packaging equipment including lathes, mills, sonic welders, hot stamper, heat stakers, auto baggers., • Will read and interpret customer prints and specifications., • Performs various types of machine and manual assembly., • Identifies and resolves assembly and packaging issues and notifies Floor Lead/Supervisor., • Inspects assembled parts for any imperfections as per customer specifications, may include software test., • Completes production reports daily to verify completed work that states the reasons for scrap and downtime. Additional Responsibilities: • When requested, may work on special projects and various related assignments., • May be required to compile various reports and data tracking., • May be required to work in various areas of operations when necessary., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee must have excellent hand/eye coordination, and able to handle a variety of size pieces. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 40 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • High school diploma or GED required, • Minimum 2 years experience in small parts assembly or equivalent job experience, • Ability to read and interpret blueprints, • Familiar with various trade tools, • Attention to detail, • Math skills, • Work independently with minimal supervision, • Familiar with basic computer operations. This job description in no way states or implies that these are the only duties to be performed by this employee. He/she will be required to follow any other instructions and to perform any other responsible duties as requested by his/her supervisor. Syntec Optics is an Equal Opportunity/Affirmative Action Employer. Applicants are free to apply without regard to race, color, religion, sex/gender, gender identity, sexual orientation, marital status, pregnancy, genetic information, citizenship status, national origin, age, disability or veteran status or any other Federal or State legally protected classes. Read our EOE Policy Statement.

Job DescriptionJob purpose Responsible for assembly and/or scanning of small or medium sized parts, fitting and/or adjustment of interrelated parts and/or assembly, adjustment and/or repair of sub-assemblies and major assemblies per process sheets. Could also be responsible for teardown, cleaning and reassemble of refurbs. Duties and responsibilities • Maintains proper quality and quantities of manufactured materials., • Operate small equipment such as presses, magnetizing/demagnetizing equipment, scanners., • Perform SPC on all related jobs as required., • Operate degreasing systems as required., • Able to set-up equipment where applicable., • Able to calibrate and zero equipment., • Perform preventative maintenance., • Use general measuring instruments, such as indicator, calipers, and height gages., • Rotate from one job to another if needed., • Maintain accurate documentation., • Follows all established company policies, • Follows all established safety procedures and precautions. Including filing incident/accident reports., • Notifies Supervisor of all unsafe/hazardous conditions or defective equipment., • Other duties as assigned Qualifications • High School Diploma/GED, • Be able to follow written and oral instructions., • Previous employed in a production environment helpful., • Able to communicate., • Math aptitude., • Mechanical capabilities helpful. Working conditions • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Plant wide climate control and air conditioning, • Could work in areas with excessive noise. NOTE: Ear protection available., • Certain jobs extremely dirty. NOTE: Smocks or work outfits provided. Physical requirements • Could require intermittent and long periods of sitting and/or standing., • Required to do repetitive work., • Periodic lifting of materials not to exceed 50 pounds. #ROC Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran Mon - Thurs: 3pm-1:30am

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: An Extrusion Utility Operator is responsible for safely and effectively contributing to team a of 4-5 individuals supporting the operation of extrusion lamination manufacturing equipment. Maintaining a strong work ethic while demonstrating good communication skills are important to exceeding customer expectations, productivity standards, and personal career growth. Extrusion Utility Operators are expected to be able to independently prioritize their time and duties to contribute to the team running efficiently. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Performs duties in a manner that adheres to safety policies and procedures., • Participate in the training curriculum, learning new aspects of extrusion line operations while completing assigned duties required for operation., • Maintain quality standards by reviewing product specifications and ensuring thorough completion of assigned production paperwork., • Operate as a member of a larger team responsible for aspect of overall process. Team members will rely on attention to detail and proper communication to ensure entirety of process is safe and efficient., • Exercise cautious approach to heavy equipment including use over overhead hoists., • Completes tasks to ensure area around the machine is clean to GMP & Food Safety standards, • Visual acuity for identifying minor imperfections and material defects., • Basic understanding of general tool usage including tape measurers, utility knives and screw drivers., • Good communication skills, both verbal and written with working knowledge of Microsoft Office.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); and one to three years related manufacturing experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and comprehend simple instructions and short correspondences. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to peers and supervisors within the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS Ability to read/use a tape measurer and apply concepts of basic algebra. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to reach out for assistance and communicate if instructions or assignments are not clear. Ability to retain information and apply to future situations of similar manner. PHYSICAL DEMANDS The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job Description We’re looking for a Production Operator I to join our growing team in West Henrietta, NY! Who we are: Safran Electronics & Defense is an international company with 10,000 employees, built on proven expertise in technologies that underpin sovereignty. By combining human and artificial intelligence, we develop the products and services that empower aerospace and defense players to observe, decide and guide, all over the world. Safran Electronics & Defense also supports fellow Safran companies by sharing its state-of-the-art electronics skills and expertise. Within Safran Electronics & Defense, our Timing & Synchronization division is the leader in R-PNT (Resilient Positioning, Navigation & Timing) solutions. We supply military and commercial industries worldwide with accurate timing technologies and equipment (Time Servers, Inertial Navigation System), as well as ultra-precise timing and frequency distribution for applications requiring a high degree of reliability and accuracy across IP time distribution standards. In this way, we contribute to the performance of critical operations support. Whenever accuracy, safety, security and reliability are critical, the solutions of Safran Electronics & Defense leads the way. The Position: As a Production Operator I, you will be responsible for the assembly of small to medium-sized components, including the fitting, alignment, and adjustment of interrelated parts. This role involves performing precision soldering of electronic and mechanical components, ensuring reliable connections and adherence to quality standards. You will also troubleshoot and repair sub-assemblies and major assemblies, maintain production efficiency, and follow detailed work instructions to meet safety and performance requirements. The Day to Day: • Utilize a wide range of hand and power tools, along with electrical and mechanical fixtures and gauges, to perform precision assembly tasks, • Operate standard measuring and test equipment such as dial indicators, micrometers, and voltmeters, • Work with drills, jigs, fixtures, and light materials to support production activities, • Perform precision soldering of electronic and mechanical components as required, • Inspect and test your own work to ensure it meets established specifications and quality standards, • Verify and review the work of others for accuracy and compliance, • Perform a variety of mechanical, optical, and electrical/electronic operations, • Follow detailed work instructions, safety protocols, and production procedures, • Maintain a clean, organized, and efficient work environment What you Bring to Safran: • High School Diploma or GED equivalent, • Minimum 3 years electronics assembly experience or equivalent with soldering experience on printed circuit boards, • Ability to solder/de-solder/rework assemblies/SMT experience, • IPC-610 & JStandard 001 (preferred), • Ability to read and follow directions with heavy attention to detail, • Able to use ERP system to complete tasks as required, • Able to read color coded Process Details, • Ability to utilize Microsoft Programs Visit our website for more information or check out our videos on YouTube At Safran Electronics & Defense, you’ll combine passion for your job with a quality work environment adapted to a good life balance. Benefit from a variety of opportunities to shape the career path that suits you: our leaders and technical experts are there to support you from your integration and career development, in France and abroad. Safran Trusted 4D, Inc is an equal opportunity employer who does not discriminate based on race, color, citizenship, religion, gender, sexual orientation, national origin, age, disability, veteran’s status or any protected category. We encourage veterans and people with disabilities to apply.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SCHEDULE: 12 hour shifts rotating day/night schedule SUMMARY: Identifies and segregates defective material within individual slit rolls. Combines leftover good material into finished rolls and palletizes for shipment to the customer. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. • Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed., • Mounts slit rolls of product onto shaft of machine using lift cart. Removes rolls as well., • Sets up and makes necessary adjustments to the machine., • Must be able to identify defects and splice good material together per spec., • Reads and understands specs of products being run. Must know packaging materials required for palletizing finished product also. Occasionally uses hand tools to prepare packaging materials., • Completes daily production reports., • Operates stretch wrap machine to wrap finished pallets., • Regularly cleans machine and surrounding area., • Actively participates in safety programs and makes safety observations. Follows plant safety rules., • Other duties as assigned.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED). Dr Winder experience a plus. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common, fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee is occasionally required to stand; walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to vibration. The noise level in the work environment is usually. moderate American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job DescriptionDescription: General Job Summary: Using job production documentation, selects, loads, and aligns tools into press brake machines in order to produce metal parts from raw stock while ensuring the safety integrity of the tool and the quality of the finished part. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Ensure all safety processes and procedures are defined for the job., • Reviews job description (job traveler) and determines tool requirement., • Using material handling equipment, loads and aligns appropriate tool into press brake machine., • Sets up blanks for forming in machine., • Selects appropriate packaging material and sets up supply., • Make the first part to ensure quality., • Confers with toolmakers and quality personnel to resolve problems., • Inspects first run of the part. Submits to inspection for blue tag. Runs parts., • Instructs machine operator on part production., • Performs periodic quality checks., • Schedules work on various press brake machines to ensure daily/weekly production requirements are met., • May train new brake operators., • May assist in scheduling jobs in other presses., • Maintains inventory of tools and fixtures., • Assists with other duties as assigned by supervisor/ manager. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED); or equivalent combination of education and experience. One year certificate from college or technical school preferred Experience 2-3 years related experience or training Computer Skills: None Other Requirements: Understanding and ability to use inspection gauges (verniers, micrometers, height stand, pins) and material handling equipment. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasping and twisting; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an Associate encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the Associate is regularly exposed to extreme heat; extreme cold; wet and/or humid conditions. While performing the duties of this job the noise level in the work environment is usually loud.

Job Description At Century Mold, we don't just mold parts, our customers come to us with their toughest challenges … and we mold solutions. The plastics industry is full of challenges and the Century Mold team prides themselves on their problem-solving capabilities. We strive to provide and deliver more not only for our customers but for our team as well. Our Machine Operators are essential to Century Mold’s success by ensuring that our manufacturing processes are consistently executed with the highest regard for quality. As a Machine Operator you will fulfill orders according to job specifications with an eye towards process improvement, quality and meeting or exceeding job productivity and efficiency standards. This person will have a strong work ethic, attention to detail, and the ability to thrive in a fast-paced, high-performance, results-driven environment. What You’ll Be Doing: • Has responsibility for completing all quality checks and paperwork associated with job tasks., • Read and follow operator instructions and alerts., • Record number of containers made., • Visually inspect products for defects and record both the reasons and amount of defects., • Keep work area neat and organized according to 5S program., • Communicate with incoming and outgoing operators., • Spray molds as required., • Provide relief on other machines as requested. We would love to hear from you if: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department. 10:45 p.m.-7:15 a.m.

Job DescriptionDescription: Where Precision Meets Possibility We don't just make parts - we craft perfection down to the micron. At Addison Precision Manufacturing, we're the masterminds behind the components that power aerospace innovations, advance medical breakthroughs, and drive manufacturing excellence. Our arsenal? State-of-the-art technology and advanced machinery paired with unmatched expertise that set industry standards in precision machining. We're not your average manufacturing facility. We're a team of precision perfectionists who: Transform raw materials into aerospace marvels, create components that save lives in medical devices, set the gold standard in manufacturing excellence and deliver quality that keeps our clients coming back. If you believe that 'good enough' isn't good enough, and precision is your passion, you might just be who we're looking for. Join us in shaping the future of precision manufacturing - where every thousandth of an inch matters, and excellence isn't just a goal, it's our standard operating procedure. Position Summary We're seeking a detail-oriented Deburring Technician who takes pride in delivering flawless finished products. At Addison Precision Manufacturing, the final touch makes all the difference. You'll work with high-precision components for aerospace, medical, and advanced manufacturing industries where surface finish quality is critical. This role is perfect for someone who combines skilled hands with a keen eye for detail. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insuranceRequirements: Key Responsibilities: • Perform precision deburring operations on machined components including filing, sanding, deburring, cleaning, grinding, masking and polishing parts in accordance with standards set by Addison Precision Manufacturing and the customer., • Remove burrs, sharp edges, and surface imperfections using various hand tools and equipment, • Inspect parts for compliance with customer specifications., • Use precision measuring instruments to verify part quality., • Read and interpret technical drawings and work instructions., • Maintain detailed documentation of work completed., • Keep work area clean and organized., • Follow safety protocols and proper PPE requirements., • Handle delicate and high-value components with care., • Report any quality concerns to supervision. Qualification Requirements: • High school diploma or GED Required; Trade/Vocational certificate in precision machining a plus!, • 1+ years’ experience in deburring or finishing operations., • Experience in aerospace parts finishing a plus!, • Ability to solve problems, think analytically and critically., • Experience using hand tools and deburring equipment., • Strong attention to detail and quality focus., • Basic math skills and ability to use measuring tools., • Good hand-eye coordination and manual dexterity., • Reliable and consistent work ethic., • Knowledge of measurement instruments., • Experience using manual and electric hand tools and machines., • Ability to stand for extended periods. Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand, walk, stoop, kneel, crouch, and talk and hear., • The job may involve prolonged periods of sitting and standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally, works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and may require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • May work at different workstations as production needs require, or shifts from one station to another, during the production process.

Job DescriptionDescription: General Job Summary: In addition to performing laser operation, ensures jobs are set-up to meet MPCD/customer requirements. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Understands and follows all applicable safety policies and procedures., • With Manufacturing Supervisor, schedule daily/weekly workload., • Download part program into machine controller., • Ability to perform adjustments of the tube laser to remedy slag, burn through, burrs, and un-desirable conditions., • Utilizes hand instruments (micrometers, calipers, height gage) to perform first piece/blue tag inspections., • Obtains inspection approval for each job., • Works with Engineering to resolve problems and production issues., • Train new Associates on equipment operation, department processes and procedures., • Ability to troubleshoot and resolve basic errors with the operation of the tube laser., • May be required to work/assist Maintenance with issues outside of basic errors/issues., • Ability to successfully load material and record production in Plex. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED); One year certificate from college or technical school preferred or equivalent combination of education and experience. Experience 2-3 years related experience or training Computer Skills: None Other Requirements: Ability to use quality measurement devices such as micrometer, verniers, calipers height gauges. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasping and twisting; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the Associate is regularly exposed to extreme heat; extreme cold; wet and/or humid conditions. While performing the duties of this job the noise level in the work environment is usually loud. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SCHEDULE: 12 hour rotating shifts on a 2-2-3 schedule SUMMARY: Extrusion Operator 3 is responsible for safely and effectively contributing to teams of 4-5 individuals supporting the operation of extrusion lamination manufacturing equipment. Maintaining a strong work ethic while demonstrating good communication skills are important to exceeding customer expectations, productivity standards, and personal career growth. An Extrusion Operator 3 is expected to be able to independently prioritize their time and duties to contribute to the team running efficiently. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Performs duties in a manner that adheres to safety policies and procedures., • Participate in the training curriculum, learning new aspects of extrusion line operations while completing assigned duties required for operation., • Maintain quality standards by reviewing product specifications and ensuring thorough completion of assigned production paperwork., • Operate as a member of a larger team responsible for aspect of overall process. Team members will rely on attention to detail and proper communication to ensure entirety of process is safe and efficient., • Exercise cautious approach to heavy equipment including use over overhead hoists., • Completes tasks to ensure area around the machine is clean to GMP & Food Safety standards, • Visual acuity for identifying minor imperfections and material defects., • Basic understanding of general tool usage including tape measurers, utility knives and screw drivers., • Good communication skills, both verbal and written with working knowledge of Microsoft Office.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); and one to three years related manufacturing experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and comprehend simple instructions and short correspondences. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to peers and supervisors within the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS Ability to read/use a tape measurer and apply concepts of basic algebra. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to reach out for assistance and communicate if instructions or assignments are not clear. Ability to retain information and apply to future situations of similar manner. PHYSICAL DEMANDS The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SCHEDULE: 7am-7pm on a 2-2-3 schedule SUMMARY: Assist in daily operations of the Finishing Department. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Participates in training, embrace concepts of and actively practice the STOP Safety Program fundamentals to aid American Packaging Corporation’s efforts to achieve a zero-accident rate., • Retrieves all necessary set up information/specifications/guidelines and follows instructions on the job jacket., • Safely, efficiently and effectively assists with the assigned production machinery equipment monitoring quality, production and waste adhering to all customer specifications., • Ensures immediate work area and work areas for which Machine Operator has responsibility are free of clutter and debris. Perform all cleaning/sanitation responsibilities, safely using all required cleaning solutions and protective equipment., • Monitors all quality requirements as outlined by company procedure and specification. Completes necessary sheets for quality checks., • Actively participates in safety programs and completes required safety observations. Understands and follows plant safety rules., • Attends and participates in all scheduled meetings (Continuous Quality Improvement, safety, special projects, departmental, etc.)., • Able to work all scheduled shifts and required overtime hours., • Trains new employees as necessary., • Other duties as assigned.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) required. Previous manufacturing experience preferred. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee is occasionally required to walk and reach with hands and arms. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to airborne particles and vibration. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job Description Job purpose The primary responsibility for Machine Operator/Slicer is to attend machines while the machines slice parts. The operator is responsible for maximizing the quantity of parts while maintaining the quality of parts. Duties and responsibilities • Installs proper oils and coolants., • Adjusts machines accordingly for quality and quantity., • Removes swarfs and old coolants from machine and properly disposes of them., • Changes machine oils, coolant and filters., • Cleans machine and coolant tanks when necessary., • Maintains tooling to perform at maximum efficiency., • Maintains proper quality and quantities of manufactured materials., • Operate multiple slicing machines at a time., • Review Operation Sheet to assure all previous operations have been satisfactorily completed., • Setup and operate the equipment in a safe and productive manner., • Maintain part and identification during processing., • Verify completed operations match blue prints, • Other duties as assigned Qualifications • High School Diploma/GED, • Able to read blueprints, • GD&T Training & Understanding, • Able to use and understand standard and metric measuring systems., • Use of standard measuring tools., • Able to work individually and in a team environment., • Statistical Process Control (SPC) Experience beneficial. Working conditions • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Plant wide climate control and air conditioning, • Could work in areas with excessive noise. NOTE: Ear protection available. Physical requirements • Could require intermittent and long periods of sitting and/or standing., • Required to do repetitive work., • Periodic lifting of materials not to exceed 50 pounds. Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran #ROC Mon - Thurs: 3pm - 1:30am

Job Description Our Machine Operators are essential to Century Mold’s success by ensuring that our manufacturing processes are consistently executed with the highest regard for quality. As a Machine Operator you will fulfill orders according to job specifications with an eye towards process improvement, quality and meeting or exceeding job productivity and efficiency standards. This person will have a strong work ethic, attention to detail, and the ability to thrive in a fast-paced, high-performance, results-driven environment. What You’ll Be Doing: • Has responsibility for completing all quality checks and paperwork associated with job tasks., • Read and follow operator instructions and alerts., • Record number of containers made., • Visually inspect products for defects and record both the reasons and amount of defects., • Keep work area neat and organized according to 5S program., • Communicate with incoming and outgoing operators., • Spray molds as required., • Provide relief on other machines as requested. We would love to hear from you if: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department. 6:45 a.m.-3:15 p.m.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. shift schedule: 12 Hour Days: This is a night shift position, with hours from 6:00 PM to 6:00 AM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. job purpose: Operate milk separating equipment in the processing department in a safe and sanitary manner following all GMP's. Operations include receiving/coordination of raw milk, separation, selection of skim milk and cream tanks/silos, running of HTST, monitoring and maintaining process controls of heat exchanger process variables and documenting accurate recordings of process parameters while in operation. Blend and pasteurize for bulk load-out. responsibilities: • Follow all safety, working, and Good Manufacturing Practice (GMP) rules. Keep the work center audit ready., • Report to and follow the direction of Processing Supervisors., • Know proper established start up and shut down procedures., • Maintain and monitor proper process parameters such as pressures, temperatures, flow rates as well as the quality of product being produced., • Know and maintain process specifications., • Properly clean process equipment such as silos, cream storage silos, balance tanks, lines, valves, pumps and heat exchangers., • Clean process equipment such as tanks, lines and separators, which includes, but isn't limited to, hand-cleaning parts, Clean-In-Place (CIP) and Clean-Out-of-Place (COP) operations on a daily basis., • Take accurate samples to monitor Clean-In-Place (CIP) system for chemical concentration., • Take accurate samples of products for QA testing., • Service pumps, valves and heat exchangers to maintain operational state and per routine Preventative Maintenance (PM) schedule., • Responsible for overall system efficiency., • Follow escalation protocol based on production and quality triggers., • Aid in the training of new personnel or upskilling of team members., • Effectively follow proper standard operating procedures (SOP)., • Complete every shift Master Sanitation Schedule (MSS), Centerline (CL), and Clean, Inspect, Lubricate (CIL) tasks on a timely manner and accurately., • Communicate with upstream and downstream processing on any anticipated schedule delays and/or changes skills/qualifications required: • Must work in a safe, efficient manner and follow all safety procedures including the use of safety equipment., • Must have the ability to troubleshoot small problems and be able to discern when issues may require input from levels of authority within the corporation., • Must be willing to ask for assistance when the process is unclear., • A high school diploma or General Education Degree (GED) is required, • High School level verbal and written communication skills., • Basic computational skills required. Simple math reasoning required., • Must be able to operate the equipment effectively after the appropriate break-in period., • Must possess or be able to obtain an Industrial Truck Operator License., • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. working conditions and physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting/Standing/Walking/Lifting/Carrying: The operator stands throughout their shift and walks on uneven concrete and tile surfaces. The operator lifts up to 60 pounds on an occasional basis. Two or more employees complete lifts of greater than 100 pounds. Pushing/Pulling/Bending/Stooping: The operator occasionally pushes/pulls a variety of objects which may include empty pallets, and brooms during cleanup activities. The operator will push/pull pipe-fittings during hook up. The operator bends and stoops occasionally throughout the workday, when servicing equipment, picking supplies or waste product off the floor. Squatting/Kneeling/Crawling/Twisting/Turning: The operator may squat when picking up supplies and during cleanup duties, including kneeling on the floor and crawling under equipment. Occasional twisting and turning at the waist while changing dryer lances, or making CIP connections. Climbing/Balancing/Reaching: The operator occasionally climbs approved stairs or ladders. The operator reaches below shoulder level to pick up pipe-fittings from the floor or while servicing product pumps and related equipment. The operator may reach at or above shoulder level when making equipment adjustments, or during cleanup duties. Grasping/Manipulation: Frequent use of the hands and fingers is required of the operator when servicing pumps, using scrub brushes, and connecting pipe-fittings. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Employees will be subject to ambient temperatures as well as elevated temperatures, up to 110 degrees, due to equipment operation and cleaning. food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of absence, another employee with the same skill level will assume the duties and responsibilities as required. position location: Webster, NY reports to: Processing Supervisor travel requirements: Little to none exempt/nonexempt: nonexempt fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email careers@fairlife.com. For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: Slits printed rolls from the press or Extruder to individual rolls as per customer specifications. Material being slit is inspected for quality/defects and finished rolls are palletized for shipment to the customer. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed., • Reads job specifications to determine machine adjustments and material requirements., • Sets up machine., • Uses lowboy to mount full rolls onto machine., • Observes machine operation to detect material defects or machine malfunction., • Measures material dimensions to determine accuracy of machine operation., • Performs minor machine maintenance such as oiling/greasing machines and changing female knives., • Prepares required paperwork, including daily production reports, SPC charting, roll tickets and inventory tags., • Completes work orders when necessary., • Actively participates in safety programs and makes safety observations. Follows plant safety rules., • Other duties as assigned.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee frequently is required to reach with hands and arms and talk or hear. The employee is occasionally required to walk and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to humid conditions, airborne particles, and vibration. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SCHEDULE: 12 hour rotating shifts, 7am - 7pm and 7pm -7am, on a 2-2-3 schedule SUMMARY: Assist in daily operations of the Finishing Department. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Participates in training, embrace concepts of and actively practice the STOP Safety Program fundamentals to aid American Packaging Corporation’s efforts to achieve a zero-accident rate., • Retrieves all necessary set up information/specifications/guidelines and follows instructions on the job jacket., • Safely, efficiently and effectively assists with the assigned production machinery equipment monitoring quality, production and waste adhering to all customer specifications., • Ensures immediate work area and work areas for which Machine Operator has responsibility are free of clutter and debris. Perform all cleaning/sanitation responsibilities, safely using all required cleaning solutions and protective equipment., • Monitors all quality requirements as outlined by company procedure and specification. Completes necessary sheets for quality checks., • Actively participates in safety programs and completes required safety observations. Understands and follows plant safety rules., • Attends and participates in all scheduled meetings (Continuous Quality Improvement, safety, special projects, departmental, etc.)., • Able to work all scheduled shifts and required overtime hours., • Trains new employees as necessary., • Other duties as assigned.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) required. Previous manufacturing experience preferred. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee is occasionally required to walk and reach with hands and arms. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to airborne particles and vibration. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job Description Overview The CDL Truck Driver will be responsible for the safe and efficient operation of rear load, front load, side load, and roll off trucks, while providing prompt, courteous and complete waste removal services for customers on designated routes. The Driver safely maneuvers assigned vehicle in residential or commercial environments; navigates high traffic and congested roadways, driveways, alleyways, and lots and provides excellent customer service. The driver must have the ability to make positive contributions to their surrounding communities on behalf of Casella. Hiring Range: $25-28 per hour. Position is eligible for a $5,000 hiring bonus. Drivers at Casella participate in a Career Pathways Program that offers exceptional Advancement Opportunity, Regular Merit Increases, and Safety Bonus Incentives. #INDSJ Responsibilities • Performs pre/post trip inspections of assigned vehicle in accordance with Casella safety standards as well as state and federal regulations; maintains appearance of truck in accordance with company standards., • Exhibits dedication to performing safe operation of rear load, front load, side load, roll off trucks on streets, highways, customer sites, and construction sites., • Provides a distinguishably different level of service through courteous interactions with all customers and provides service in a timely manner., • Exhibits a positive attitude towards company, customer and municipal goals., • Completes all assigned company and federally mandated paperwork accurately., • Empties all receptacles Cleans area around accidental waste spills., • Completes assigned route sheet for one Line of Business (LOB)., • Attends and participates in all scheduled training programs and meetings as required by Casella or Manager., • Notifies Dispatch of any service interruptions, incidents, accidents, property damage, or unsafe situations; exhibits an ability to be observant and aware of all surroundings at all times., • Participates in training and other learning opportunities to expand knowledge of the company, products, sales and services and performs any other duties needed to help drive our vision, fulfill our mission, and/or abide by our core values. Career Path Definitions & Distinctions Apprentice: Completes training for Helper safety (Rear Load Residential), customer service training and required training to safely operate a commercial motor vehicle while providing service to customers in their line of business. Obtains CDL Permit. Class I Driver: Demonstrates the ability to complete assigned route sheet for 1 Line of Business as well as ability to complete tasks necessary as to one of the following: Rear load, front load, side load, roll off trucks. Class II Driver: Demonstrates the ability to complete assigned route sheet for 2 Lines of Business as well as ability to complete tasks necessary as to two of the following: Rear load, front load, side load, roll off trucks. Shows a development of improvement of communication skills with customers and coworkers. Exhibits evidence of increased knowledge of the company and industry. Illustrates an ability to be a mentor to new employees. Class III Driver: Demonstrates the ability to complete assigned route sheet for 3 Lines of Business as well as ability to complete tasks necessary as to three of the following: Rear load, front load, side load, roll off trucks. Demonstrates an increased effort of providing positive contributions to the community on behalf of the community. Displays a capability to participate in training and development of new employees. Lead Driver: Demonstrates the ability to develop driver training plans and coach employees to achieve successful outcomes. Exhibits the ability to complete assigned route sheets for all lines of business. Provides courteous customer service and communicates professionally with customers and employees. Actively participates in the company’s progress with the career paths program and helps drivers to move up in their careers. Qualifications The successful candidate will have a High School Diploma or GED, must be at least 18 years of age, hold a valid Class A or B CDL License and must be legally eligible to work in the United States. The physical ability to handle objects more than 50lbs frequently throughout the day and work under many different weather conditions is expected. Excellent verbal and written communication skills, effective listening and problem-solving skills, and dedication to providing excellent customer service is desired. It is also important that the candidate has demonstrated the ability to work as part of a team in a collaborative environment. This position requires successful completion of pre-employment testing, including a drug screen.

Job Description Mechanical Assembler Pay Up to $24.00/Hour | 1st Shift | Excellent Benefits | Career Growth Opportunities Why You'll Want to Apply ✅ Earn up to $24.00 per hour based on experience and skill level ✅ Consistent 1st shift schedule: Monday through Friday, 7:00 AM to 3:30 PM ✅ Work-life balance with no mandatory weekend work ✅ Optional overtime available on Saturdays for additional earnings ✅ 120 hours of PTO, 5 sick days, and paid holidays ✅ Health, dental, and vision insurance ✅ 401(k) retirement plan ✅ Opportunities for advancement into specialized assembly and leadership roles ✅ Small-team environment where your contributions are recognized and valued ✅ Stable company with long-term career potential Build Something That Matters Are you mechanically inclined and enjoy working with your hands? We're looking for a Mechanical Assembler to join our growing manufacturing team. In this role, you'll assemble high-quality mechanical components and equipment while working alongside a close-knit team that values craftsmanship, safety, and continuous improvement. If you're seeking a hands-on career with competitive pay, strong benefits, and room to grow, we'd love to meet you. Job Description The Mechanical Assembler plays a key role in assembling mechanical components, subassemblies, and finished products according to technical specifications and quality standards. This position is ideal for individuals who take pride in precision work, enjoy problem-solving, and want to contribute to the success of a collaborative manufacturing team. Responsibilities • Assemble mechanical components, subassemblies, and finished products according to blueprints, schematics, technical drawings, and work instructions., • Operate hand tools, power tools, measuring equipment, and production machinery safely and efficiently., • Read and interpret blueprints, assembly drawings, and specifications to ensure accurate assembly., • Perform quality inspections throughout the assembly process to verify compliance with company and customer standards., • Troubleshoot assembly issues and report defects, malfunctions, or process concerns to supervisors., • Measure and verify dimensions, tolerances, and alignments using tape measures, calipers, and other measuring devices., • Maintain accurate production and assembly records, including quantities completed and issues encountered., • Safely handle, move, and position materials, components, and finished products., • Maintain a clean, organized, and safe work environment while following all company safety procedures., • Collaborate with team members to improve workflow efficiency and meet daily production goals., • Support additional manufacturing and production activities as needed. Required Skills & Experience • Experience in mechanical assembly, manufacturing, production, or a related industrial environment preferred., • Strong mechanical aptitude and ability to work with hand tools and power tools., • Ability to read and interpret blueprints, schematics, and assembly instructions., • Experience using measuring tools to verify dimensions and tolerances., • Strong attention to detail and commitment to producing high-quality work., • Good manual dexterity and hand-eye coordination., • Ability to identify and troubleshoot mechanical assembly issues., • Ability to stand for extended periods and safely lift and move materials as needed., • Strong communication skills and a team-oriented mindset. Preferred Qualifications • High school diploma or GED., • Technical certification in manufacturing, mechanical assembly, maintenance, or a related field is a plus., • Previous experience in a manufacturing or industrial production environment., • Ability to learn new equipment, procedures, and assembly processes quickly., • Strong work ethic, reliability, and commitment to workplace safety. Work Environment This position is based in a small manufacturing facility with approximately 25 employees, creating a collaborative and close-knit team atmosphere. Work is performed on a consistent first-shift schedule, Monday through Friday from 7:00 AM to 3:30 PM, with optional overtime available on Saturdays. The role involves working with hand tools, power tools, measuring devices, and manufacturing equipment in a clean, organized, and safety-focused production environment. Candidates should be comfortable standing for extended periods, performing hands-on assembly work, and lifting or moving materials as part of daily responsibilities. Ready to Build Your Future? Join a company where your skills are valued, your hard work is recognized, and your career can grow. With pay up to $24.00/hour on 1st shift, excellent benefits, advancement opportunities, and a supportive team culture, this is an opportunity you won't want to miss. Apply today! Job Type & Location This is a Permanent position based out of Rochester, NY. Pay and Benefits The pay range for this position is $19.00 - $24.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,NY. Job Type & Location This is a Permanent position based out of Rochester, NY. Pay and Benefits The pay range for this position is $20.00 - $20.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,NY. Application Deadline This position is anticipated to close on Oct 7, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionDescription A Taste of Who We Are: Backed by a tireless commitment to high quality, innovative culinary offerings and unparalleled client and guest services, Continental consistently ranks among the top contract dining and refreshment providers in the nation according to Food Management Magazine, the industry’s source for food service news and trends. Our Mission Delight our guest. Every meal. Every day. Our Core Values Exceptional – We recruit and retain phenomenal people who consistently go the extra mile to deliver results that lead the industry. Hospitality – We are tirelessly committed to providing the highest quality food, beverages, and service by anticipating our guests' needs so they can count on memorable experiences every time. Collaboration – We prioritize working together with a shared vision and effective & transparent communication, we unite as one team to achieve remarkable experiences. Responsibility – we hold ourselves accountable to be there for our team and clients, to deliver what we say we will, when we say we will and check in on progress along the way. Innovation – We are forward-thinkers always looking for new processes, technologies, and techniques to increase efficiencies and scalability to improve our services. The Experience You’ll Create: The Warehouse Associate plays a vital role in ensuring smooth daily warehouse operations. Shift: Monday - Friday 9 AM to 6 PM • Accurately pick and pack orders using technology (e.g., iPad, LightSpeed system)., • Organize and maintain inventory using FIFO (First In, First Out) method., • Load and unload trucks for routes and markets., • Replenish stock and maintain clean, organized work areas., • Read schedules, work orders, or requisitions to determine items to be moved or distributed., • Communicate inventory discrepancies to team leaders., • Record accurate inventory counts of products picked, packed, scrapped, and excess., • Follow all safety protocols and company guidelines., • Performs other related duties as assigned. Ingredients for Thriving: • High School Diploma or GED required., • Previous warehouse experience preferred., • Ability to understand, speak, read, and write in English., • Comfortable using technology (iPads, inventory systems)., • Basic math skills (addition, subtraction, multiplication, division, percentages)., • Ability to operate or willingness to learn electric pallet jack; forklift certification encouraged., • Consistently accurate and efficient order processing., • Strong attention to detail and organization., • Effective communication with team members and supervisors., • Ability to work independently and collaboratively in a fast-paced environment., • Positive attitude and commitment to service excellence. Location(s) & Logistics:, • Physical ability to stand, bend, lift, and move intermittently during working hours (with or without reasonable accommodations). Savor the Benefits: We offer a range of benefits for eligibles team members, including: • Health Coverage – Medical, Dental and Vision, • Voluntary Life/AD&D, Short-Term and Long-Term Disability, Critical Illness, • 401(k), • Paid Time Off, • Wellness Programs, • Additional Perks To see a summary of current benefits, please visit https://www.continentalserves.com/work-at-continental/#benefits. #LI-JM1 #IND103 #ZRCS

PEKO Precision Products: We Make Products That Matter\n \n \nPEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily.\n \n \nThe Opportunity: Quality Inspector\n \n \nPrimary Function: The Quality Inspector is responsible for conducting inspections of assemblies and machined parts. In this role, you will provide support to the Quality and Engineering teams in investigating corrective actions and uphold the maintenance of inspection records and documentation in accordance with government, customer, and company standards.\n \n \nEssential Functions\n\n • Perform dimensional inspections on both in-process and finished machined parts and products using measurement techniques and equipment.\n, • Inspect weldments and fabricated products\n, • Inspect the finished product (painting and powder coat)\n, • Inspect assemblies and sub-assemblies\n, • Use experience with common metrology tools including calipers, and micrometers to measure parts.\n, • CMM programming as needed.\n, • Assist with other duties as assigned by the Manager.\nReports To: Quality Manager\n \n \nBasic Qualifications\n\n • Minimum education level of High School, GED, or its equivalent\n, • Familiarity with ISO-compliant manufacturing environments\n, • Ability to read blueprints and proficient understanding of GD&T\n, • 3+ years of CMM operation/programming\nPreferred Qualifications:\n\n, • 5+ years of inspection experience in a precision machining environment\n, • 5+ years of CMM experience\n, • Previous exposure to operation and programming of CMM equipment\n, • Smart Scope vision system experience using ZONE3 Metrology Software\nWork Authorization: US Persons\n PEKO Perks:\n \n\n • Competitive Total Rewards\n, • Tuition Reimbursement (IRS Allowable pre-tax Max)\n, • 401K, Medical, Dental, Vision\n, • Flexible Spending & Health Savings Accounts\n, • Life, Short and Long-Term Disability\n, • Recognition Awards & Discretionary Benefits\nOur Core Values:\n \n\n • Compassion: We care about our talented and loyal PEKO family.\n, • Safety: We are committed to providing a safe, clean, and positive workplace.\n, • Integrity: We believe in transparency, honesty, and respect for all stakeholders.\n, • Agility: We are dedicated to maintaining an agile and financially prudent organization.\n, • Endurance: We foster the belief that PEKO people are resilient problem-solvers impacting the future.\n, • Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube\n\n \nOther:\n \n\n • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice.\n, • For more available opportunities at PEKO, please visit our website:\nJobs & Career Opportunities | Rochester NY | PEKO Precision Products\n \n \nA reasonable estimate of the compensation range for this position is $25.00 - $28.00 per hour, plus a 10% shift differential,.\n \n \nThe wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements.\n \n \nPEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training.

Job Description Feeling stuck? Put your career in motion with a great, new opportunity. Join the Kelly® team as a Production Packer to work at a premier manufacturing client in Rochester, NY. We’re here every step of the way to help you and your career be the best it can be. Bring your energy and expertise. We’ll help you get where you want to be. Shifts: • $18.50 - 1st shift: 6:30am – 3:00pm Monday–Friday, OT on weekends as needed, • $20.35 - 2nd shift: 2:30pm – 11:00pm Monday–Friday, OT on weekends as needed, • $21.28 - 3rd shift: 10:30pm – 7:00am Sunday–Thursday, OT on weekends as neededWhy you should apply to be Production Packer:, • Competitive pay rates with shift differentials, • Opportunity to work in a cleanroom environment with a focus on safety and quality, • Be part of a leading organization within the manufacturing industry, • All shifts available to fit your schedule, • Full-time, long-term opportunity with overtime potentialWhat’s a typical day as Production Packer? You’ll be:, • Visually inspecting bottles from machines, conveyor lines, or bulk containers and making quality decisions on each part, • Setting up your work area as a controlled environment (attire including hats, gloves, beard masks, coats), • Performing housekeeping responsibilities to maintain a clean production environment, • Maintaining necessary paperwork and records per quality work instructions, • Supplying molding machines with raw materials, components, and scrap containers, • Navigating SAP screens and transaction codes to look up inventory balances, • Supporting line clearance procedures and adhering to ISO 9001 Quality Work Instructions, • Operating assigned machines or equipment and alerting supervisor or set-up personnel when issues ariseThis job might be an outstanding fit if you:, • Have a High School diploma or GED (required), • Have at least 2 years of manufacturing or packaging experience, • Are familiar with SAP and proficient with MS Office (Word, Excel), • Can perform simple math (add/subtract whole numbers), • Can read, write, and understand English, • Are licensed to operate a walkie truck, • Have excellent hand/eye coordination and can lift and load pallets up to 35 pounds, • Can work in a fast-paced team environment and adapt quickly, • Are able and willing to work overtime as needed, • Own and wear steel toe or composite toe shoes/bootsWhat happens next Once you apply, you’ll proceed to next steps if your skills and experience look like a good fit. But don’t worry—even if this position doesn’t work out, you’re still in our network. That means all of our recruiters will have access to your profile, expanding your opportunities even more. Helping you discover what’s next in your career is what we’re all about, so let’s get to work. Apply to be Production Packer today! As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Please note: The following benefits reflect Kelly's general offerings. Eligibility may vary by assignment, location, and job type. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description Warehouse Associate Competitive Pay - $17-18.00/hr Full-Time - Monday - Friday 7:30a-4p Contract-to-hire Looking for a warehouse job where your hard work is appreciated and you can build a long-term career? We're seeking a dependable Warehouse Associate to join a team that values safety, teamwork, and reliability. You do not need years of warehouse experience; if you have a solid work ethic, basic warehouse or material handling experience, and enjoy staying active throughout the day, we'd love to meet you. This is an excellent opportunity for someone looking for a stable, full-time position with a company that invests in its employees. What You'll Do No two days are exactly alike! Your responsibilities will include: • Safely load and unload incoming and outgoing freight, • Assist delivery drivers with scheduled deliveries, • Operate warehouse equipment, including forklifts, pallet jacks, hand trucks, handheld scanners, iPads, and computers, • Pick, pack, and prepare customer orders accurately, • Receive shipments and verify inventory, • Perform cycle counts and assist with physical inventory, • Move materials throughout the warehouse using proper procedures, • Identify and report damaged or missing products, • Keep inventory accurate by updating computerized inventory systems, • Maintain a clean, organized, and safe warehouse environment What We're Looking For We're looking for someone who is dependable, organized, and ready to contribute to a team. Qualifications: • High School Diploma or GED, • Basic warehouse or material handling experience, • Comfortable lifting up to 50 pounds throughout the day, • Experience operating (or willingness to operate) a forklift, • Basic computer skills and confidence using inventory systems or data entry portals, • Strong organizational skills with the ability to manage multiple tasks, • Good communication skills and a team-first attitude, • Reliable attendance and a strong work ethic Why You'll Love This Opportunity • Stable, full-time position, • Hands-on work that keeps you active, • Supportive team environment, • Opportunity to learn new skills and grow your warehouse experience, • Great role for someone looking to build a long-term career in distribution, logistics, or warehouse operations If you're reliable, safety-minded, and ready to join a team that values your contributions, we'd love to hear from you! \nCompany Description TES Staffing is a regional staffing and HR services company. We work with Western NY's top companies to offer our applicants a wide variety of choices when looking for their next career opportunity. We will work with you to identify your strengths and try to match you up with the right job opening we have at that point in time. We look forward to working with you and cannot wait for you to create your future together! TES Staffing is a regional staffing and HR services company. We work with Western NY's top companies to offer our applicants a wide variety of choices when looking for their next career opportunity. We will work with you to identify your strengths and try to match you up with the right job opening we have at that point in time. We look forward to working with you and cannot wait for you to create your future together!

Job Description $1,000 SIGNING BONUS! Why Palmer Food Services? We offer competitive wages and a generous benefit package that contributes a significant amount to your total compensation and your personal well-being. Additionally, there are opportunities to distinguish yourself and move up in our established company through excellent performance and by contributing to our company mission, vision, and values. We value each member of our diverse and talented team - because at Palmer Food Services, our associates are our unfair advantage. What We Value: • Honesty & Integrity, • Service & Excellence, • Collaboration & Teamwork, • Family & Community, • Dependability & Loyalty, • Compassion What You Will Do: • Accurate Product Delivery:, • Ensure timely and precise delivery of products to local customers, including bars, restaurants, casinos, and schools., • Verify delivery contents against invoices to guarantee correct delivery of orders., • Merchandise Handling:, • Properly scan merchandise upon delivery to maintain accurate records., • Utilize handcarts, ramps, lift gates, and other equipment safely and efficiently., • Vehicle Operation and Maintenance:, • Conduct pre-trip inspections to ensure the commercial vehicle is in good operating condition., • Operate the commercial vehicle safely in compliance with all traffic regulations., • Communication:, • Maintain clear communication with the transportation department associates using cell phones., • Ensure timely reporting of any issues or delays encountered during deliveries., • Regulatory Compliance:, • Adhere to all Department of Transportation (DOT) and Occupational Safety and Health Administration (OSHA) guidelines., • Follow invoicing guidelines and return product protocols as outlined by company policy., • Record Keeping:, • Accurately record mileage and delivery times for each route., • Complete necessary documentation at the beginning and end of each daily route., • Customer Service:, • Provide excellent customer service by addressing any customer concerns or questions during deliveries., • Handle products with care to ensure they reach the customer in excellent condition., • Equipment Usage:, • Operate and maintain delivery equipment, including handcarts, ramps, and lift gates, ensuring they are in good working condition., • Daily Route Management:, • Plan and manage daily delivery routes to optimize efficiency and timeliness., • Learn, understand, and follow company-specific routing and delivery procedures., • Additional Duties:, • Perform any additional duties as assigned by supervisors to support the overall delivery process and company objectives. Minimum Qualifications: • High School diploma or GED., • Clean CDL Class A license., • Minimum of 1-2 years of prior commercial delivery experience.Food service and refer experience preferred., • Must have the ability to lift product weighing up to 100 lbs on a consistent basis., • Required to climb in and out of a commercial vehicle and operate in a safe manner., • Must be able to walk, bend, lift on a regular basis. Salary: • 25.00- $28.00 an hour Physical Demands: The physical demands described below are representative of those that must be met by a Delivery Driver to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to stand, walk, stoop, bend, kneel, sit, operate warehouse, • Must be able to use hands to handle and feel objects, perform fine finger movements, reach with hands and arms, and have the ability to see, talk, and hear., • Possess normal vision with or without correction and able to distinguish colors, • Possess fluent speech in English, writing and communication skills necessary to effectively carry out job functions Benefits of working Full-Time at Palmer Food Services: • Medical, Dental and Vision Insurance, • Paid Benefit Time (PTO, Holiday and Sick), • 401k Retirement Plan with Employer Matching, • Eligibility for Annual Profit-Sharing Bonus, • 15% Employee Discount on Retail Grocery Items (Includes Fresh Meat & Seafood), • Associate Discounts on Warehouse Food Products, • Employee Appreciation Events, • And much more #LP

Job Description Job Summary: Person will be responsible for all shipping and receiving activities, management of finished goods, customer overrun inventory and packaging supplies. Essential Duties and Responsibilities: • Forward daily customer shipping transactions and incoming packing lists to Accounting on a daily basis., • Verify if quantities produced and/or plated will satisfy the customer order quantity. If the quantity produced does not satisfy the order quantity, advise Expeditor that the job is short., • Determine proper packaging to ship parts to and from outside services, follow work instructions, and ship to customer without damage., • Review UPS, Federal Express and Local Delivery Service statements to help control shipping expenses., • Pull product ahead of ship date to eliminate surprises on the day the parts are to be shipped., • Review purchase orders for outside services and packing materials to make sure they are properly closed., • Adjust overruns into inventory in a timely manner., • Ensure the accuracy of overrun and finished goods inventory., • Verify information and quantities for non-stock or special order items., • Accountable for proper shipping of all items, to include proper containers, correct count, appropriate packing slip/invoice, and all other associated paperwork., • Receive product, verifies quantity in ERP system, and notifies Purchasing of any discrepancies., • Maintain a clean, organized Shipping/Receiving area., • Work with Customer Service on daily shipping requirements. Additional Responsibilities: • When requested, may work on special projects and various related assignments., • May be required to work in various areas of operations when necessary, assist accounting with cycle counting and year-end inventory when necessary., • May be required to compile various reports and data tracking., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. Employee must be able to stand for long periods of time. The employee must also occasionally lift and/or move up to 50 pounds. Employee must have the ability to solve practical problems, and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • High school diploma or GED required., • Minimum two years experience in Shipping/Receiving., • Ability to use Excel, Word and Power Point., • Ability to use Microsoft Outlook to communicate with Customers, Vendors and inter office staff on a regular basis., • Familiar with custom software programs for freight vendors; UPS, Fed-Ex, ETC., • Basic arithmetic skills and attention to details is required., • Ability to handle multiple priorities, • Good communication skills., • Work independently with minimal supervision. Syntec Technologies is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, gender, age, disability, protected veteran status, or any other reason prohibited by law.

Job Description The HVS Apparel Sorter Trainee processes and prepares donated apparel for textile waste diversion and order fulfillment. This individual inspects, sorts, and categorizes products according to predetermined specifications and standard operating procedures, maintaining adherence to all safety policies and required personal protective equipment at all times. Success in this role requires low-error execution, high efficiency, and consistent upholding of Goodwill BLUE values. ESSENTIAL DUTIES AND RESPONSIBILITIES: Financial – Sustains growth through financial stewardship & fiscal responsibility. • Meets hourly quota and quality goals as outlined in the training guide, showing meaningful improvement over the 90-day period., • Inspects donated apparel, analyzing the quality, condition, material type, size, and style to determine proper sorting category., • Sorts apparel into designate categories according to established specifications and standards., • Maintain accurate records such as the tally weights of sorted and graded apparel., • Participates in daily closeout procedures, including weighing gaylords, recording weights, combining bins, and resetting stations for the next shift., • Safeguards company property, including donated goods. Reports any incidents of theft or misappropriation or unauthorized possession of company property. Customer & Community – Collaborates with customers to understand and deliver customer needs & expectations. • May be cross trained to work as a Runner, Baler, and/or Forklift Operator., • Maintains a clean work environment, including restrooms, floors, walls, windows, and parking lots, as directed. Operational Excellence – Implements strategies to maximize resources and infrastructure. • Receives and processes apparel from the retail stores, inspecting quality, type of material, size and/or style of clothing, and sorts the apparel into the appropriate category., • Identifies non-qualifying items for alternate waste diversion routes., • Maintains workstation in an organized and safe manner free from food, drink, or other personal items., • Responsible for following and ensuring all safety rules are complied with, and appropriate safety equipment is used. Immediately acts and/or reports any unsafe or potential hazards., • Constantly works towards the highest level of efficiency and effectiveness. Team Goodwill – Promotes a culture that embraces growth and development to meet the needs of our team. • Models Goodwill BLUE core values., • Assists team in achieving daily production goals., • Participate in daily team huddles., • Supports a collaborative team culture. Performs other related duties, as assigned. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to demonstrate proficiency in meeting competencies required for position; able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed below are representative of the knowledge, skill and/or ability required. EDUCATION AND EXPERIENCE: Minimum Qualifications (Education, Experience, Skills): • High School Diploma, GED, or equivalent experience., • Ability to be trained and take directions., • Ability to memorize specific categories., • Ability to communicate and read English., • Must be 18 years of age or older., • Must be able to use a calculator to add and subtract numbers. LANGUAGE SKILLS: Ability to communicate and read English. Able to read and write reports, compile data as needed. Communicates effectively with others and provides essential duties either verbally or via e-mail. REASONING ABILITY: Able to define problems, collect data, establish facts, and draw valid conclusions. Able to interpret instructions furnished in written, oral or diagram form. WORK ENVIRONMENT: While performing the duties of this job, the employee is usually working in a warehouse environment. This position requires standing for long periods of time. At times this employee may be exposed to the outside environment. The noise in this environment will be moderate to loud. AVAILABILITY: Must be able to work Monday – Friday on location. Open availability may be requested at a later date. PHYSICAL DEMANDS: PHYSICAL AND WORKING ENVIRONMENT Activity Rarely, Occasionally, Frequently, Continuously or N/A Stationary Standing Continuously Sitting Rarely Walking Frequently Crawling Rarely Balancing Occasionally Bending Frequently Squatting Occasionally Kneeling Occasionally Twisting/Turning Frequently Climb Occasionally Overhead Reaching Occasionally Typing/Keyboarding Occasionally Lifting/Carrying – up to 10 lbs. Continuously Lifting/Carrying – up to 20 lbs. Continuously Lifting/Carrying – up to 35 lbs. Frequently Lifting/Carrying – up to 50 lbs. Frequently Lifting/Carrying – Greater than 50 lbs. Occasionally Pushing/Pulling – up to 10 lbs. Continuously Pushing/Pulling – up to 20 lbs. Continuously Pushing/Pulling – up to 35 lbs. Continuously Pushing/Pulling – up to 50 lbs. Frequently Pushing/Pulling – Greater than 50 lbs. Occasionally Driving (car/equipment) N/A Critical Thinking/Organization Frequently Talking on Phone N/A Talking in Person Frequently Hearing in Person Frequently Goodwill of the Finger Lakes is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SCHEDULE: Both day and night shift available: 7am-7pm OR 7pm-7am on a 2-2-3 schedule SUMMARY: Loading and unloading inbound and outbound trucks, staging material, inventory of raw materials, supplying machinery with raw materials and in-process rolls for production. Label and warehouse finished goods. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Participate in training, embrace concepts of and actively practice the SPOT Safety Program fundamentals to aid American Packaging Corporation’s efforts to achieve a zero-accident rate., • Safely operate all fork trucks (ride-on, scissor lift, and walk behind)., • Service manufacturing machines with proper raw materials (film, boxes, adhesives, glue, paper, etc.), • Remove (from the production floor) wrap and store all finished goods utilizing pallet location information., • Stage outbound shipments in an organized manner utilizing release information., • Communicate regularly with fellow S/R employees., • Load and unload freight as it arrives & leaves the facility., • Recharge and maintain all electric batteries on fork trucks., • Accurately complete all monthly cycle counts., • Receive material using AS400 system and make labels when requested., • Organize and stack all unused pallets., • Maintain a neat and orderly S/R work area., • Adhere to all company safety guidelines., • Able to work all scheduled shifts and assigned overtime., • Attend and participate in all company mandated meetings., • Business travel may be required., • Any other assigned duties.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or GED, previous manufacturing experience preferred, but not necessary, and acceptable prior work history. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute percentages and interpret bar graphs. REASONING ABILITY Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand, walk, sit, reach with hands and arms, stoop, kneel, crouch or crawl, climb and balance. The employee is frequently required to use hands to finger, handle or feel objects, tools or controls. The employee is regularly required to talk or hear and taste or smell. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, distance and the ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee works near moving mechanical parts and is exposed to fumes or airborne particles (works in an environment where solvent based inks are used). The employee frequently works in high, precarious places, and is exposed to electrical shock (only authorized maintenance personnel are allowed access to electrical cabinets). The noise level in the work environment is usually loud. Hearing protection is mandated. Safety glasses and steel toed shoes with anti-static discharge soles are required. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job DescriptionWhy Palmer Food Services? We offer competitive wages and a generous benefit package that contributes a significant amount to your total compensation and your personal well-being. Additionally, there are opportunities to distinguish yourself and move up in our established company through excellent performance and by contributing to our company mission, vision, and values. We value each member of our diverse and talented team - because at Palmer Food Services, our associates are our unfair advantage. What We Value: • Honesty & Integrity, • Service & Excellence, • Collaboration & Teamwork, • Family & Community, • Dependability & Loyalty, • Compassion Roles and Responsibilities: • Selects, assembles, palletizes, and otherwise handles cases, boxes, bags, frozen foods, dairy products, produce, proteins, and related products as identified on pick tickets, in the quantities specified, for delivery, • Safely operates pallet jacks and stock pickers, • Accountable for meeting productivity, accuracy, and safety work standards, • Assists with training and development of new associates Qualifications: • High school diploma or a GED, • 1+ years’ experience loading and selecting merchandise in a warehouse, • 1-2 years’ experience with electric power equipment, • Basic reading, writing and math skills to properly identify products and mark them for delivery, • Ability to understand the slot-sequencing layout of the warehouse and labels that are placed on selected products, • Ability to work in varying temperatures in order to select product from refrigerated, frozen, and dry picking locations, • Ability to follow instructions to work safely, efficiently, and accurately using company provided equipment, • Ability to lift products weighing between 40-60 lbs Salary: • 19.00/ hour plus a performance incentive Shift: • Sunday – Thursday 6:30 PM – finish (up to 6:30 AM) Physical Demands: The physical demands described below are representative of those that must be met by a Warehouse Order Picker to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to stand, walk, stoop, bend, kneel, sit, operate warehouse, • Must be able to use hands to handle and feel objects, perform fine finger movements, reach with hands and arms, and have the ability to see, talk, and hear., • Must be able to regularly lift and carry up to 100 lbs on a regular basis, • Ability to work in a cold environment for extended periods with temperatures reaching -10, • Possess normal vision with or without correction and able to distinguish colors, • Possess fluent speech in English, writing and communication skills necessary to effectively carry out job functions Benefits of working Full-Time at Palmer Food Services: • Medical, Dental and Vision Insurance, • Paid Benefit Time (PTO, Holiday and Sick), • 401k Retirement Plan with Employer Matching, • Eligibility for Annual Profit-Sharing Bonus, • 15% Employee Discount on Retail Grocery Items (Includes Fresh Meat & Seafood), • Associate Discounts on Warehouse Food Products, • Employee Appreciation Events, • And much more #HP 6:30 PM- Finish (6:30 AM)

Job Description SUMMARY: The Material Handler- Runner maintains efficient warehouse operations by moving product to and from various workstations, breaking down bales, and assisting with station clean-up. The position combines physical material handling with quality control. The Material Handler- Runner must have strong adherence to all safety policies and always wear all required personal protective equipment. The Material Handler- Runner will also sort and prepare the donated apparel to be able to sell in the salvage market when needed. The Warehouse Runner is responsible for production in the salvage department. This individual will sort, hang, tag, and label products according to standard operating procedures. They will also provide excellent customer service and maintain a clean, neat, and safe work environment. This position may also be cross-trained and responsible for additional duties. ESSENTIAL DUTIES AND RESPONSIBILITIES: Material Handling & Processing • Transport products between workstations in coordination with forklift operators to maintain workflow efficiency, • Load and manage clothing on grading tables and conveyors, • Process a minimum daily quota of 12 Gaylords (1,300 pounds or more), • Break down clothing bales to optimize processing speed, • Transfer processed items to baling station, • Record and track material weights, including:, • Daily starting and ending weights Individual Gaylord weights (summer, winter, and oversized "Biggie" categories), • Maintain accurate tally sheets for all processed materials Quality Control & Sorting • Inspect donated merchandise for quality standards, • Sort and categorize clothing based on:, • Material type, • Size, • Style, • Seasonal categories (summer/winter), • Process retail store clothing returns, • Route non-qualifying items to appropriate clearance channels, • Prepare salvage-grade apparel for resale according to standard operating procedures Operational & Safety Compliance • Maintain an organized, safe, and clean workstation free of personal items and potential hazards, • Follow all safety protocols and properly use the required safety equipment, • Report any safety hazards or concerns immediately, • Protect company assets, including donated goods, and report any incidents of theft or misappropriation, • Support facility cleanliness, including maintenance of restrooms, floors, walls, windows, and parking lots as needed Additional Duties • Cross training opportunity for warehouse operations and forklift operations, • Perform other duties as assigned by management QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to demonstrate proficiency in meeting competencies required for position; able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed below are representative of the knowledge, skill and/or ability required. EDUCATION AND EXPERIENCE: Minimum Qualifications (Education, Experience, Skills): • High School Diploma, GED, or equivalent experience., • Ability to be trained and take direction., • Ability to speak and read English proficiently., • Must be 18 years of age or older., • Must be able to use a calculator to add and subtract numbers., • Ability to pass a background check and drug screen, where applicable LANGUAGE SKILLS: Ability to speak and read English proficiently. Able to read and write reports, compile data as needed. Communicates effectively with others and provides essential customer service duties either verbally or via computer e-mail. REASONING ABILITY: Able to define problems, collect data, establish facts, and draw valid conclusions. Able to interpret instructions furnished in written, oral or diagram form. WORK ENVIRONMENT: While performing the duties of this job the employee is usually working in a combination of a warehouse and retail store environment. At times this employee may be exposed to the outside environment. The noise in this environment will be moderate to loud. May require travel to other states or Goodwill territories. AVAILABILITY: Must have open/flexible availability and be willing to work evenings & weekends. PHYSICAL DEMANDS: Physical Demands- Apparel Processor Frequency Never Rarely Occasionally Frequently Always Sitting X Standing X Walking X Bending over X Crawling X Reaching Overhead X Crouching X Kneeling X Balancing X Lifting and Carrying 10 lbs. or less X 11 to 25 lbs. X 26 to 50 lbs. X 51 to 75 lbs. X 76 to 100 lbs. X over 100 lbs. X Push/ Pull Max Force 0 to 20 lbs. X 21 to 39 lbs. X 40 to 59 lbs. X 60 to 100 lbs. X

Job DescriptionDescription: General Job Summary: Responsible for assembly/packing of sheet metal components of small or medium sized parts, fitting and/or adjustment of inter-related parts and/or assembly based on written specifications. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Follows all safety processes and procedures in accordance with job and Company requirements., • Following specific written instructions and/or blueprints, assembles components into finished product., • Disassembles and re-builds products per specifications., • Conducts quality checks following quality process instructions., • Pack and labels product following packaging instructions., • Ensures that the work area is clean, orderly, and safe., • Work in packaging as needed, including packing large assemblies or parts., • Inspect parts for defects or damage prior to packing., • Make boxes, apply labels, verify counts, and follow packing instructions., • Follow directions on packing from Packaging Lead., • Assists with other duties as assigned by supervisor/manager. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED) Experience 2-4 years related experience or training or equivalent combination of education and experience. Other Requirements: Additional mechanical training and/or blueprint reading a plus. Ability to use hand tools such as screw drivers, sockets, Allen wrench, air drivers, tape dispenser and material handling equipment such as tow motor. Ability to read and understand blueprints, quality and packing instructions. Computer Skills: None required. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to sit; walk, stand for extensive periods of time, maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasp and twist; talk or hear; and lift and/or or move equipment/product weighing up to 50 pounds. Utilize lift assist or work with another associate to lift anything greater than 50Ilbs. Must pass physical abilities test because of weight of assemblies being worked on. Work Environment: The work environment characteristics described here are representative of those an Associate encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. The work environment may include humid conditions and extreme heat and cold. While performing the duties of this job the noise level in the work environment is usually loud.

Job DescriptionDescription: Our Mission Our mission is to leverage the power of food to end hunger and build healthier communities. Our Vision We believe that the fight against hunger and the fight against poverty are one and the same. We envision a future in which food is recognized as a human right and every person is able to feed themselves and their families in dignity. Together, we work to create a more nourished, prosperous region. The Foodlink Way Act with Compassion Take Responsibility Be a Team Player Listen, Learn, Adapt Job Title: Warehouse Support Reports to: Food Bank Fulfillment Supervisor Status: Hourly, Non-exempt, Full time Grade: 3 – Operational and Customer Service Roles SUMMARY The Warehouse Support role provides flexible, hands-on support across Foodlink’s Food Bank operations, including Receiving, Order Selection, Delivery and Volunteer Sort activities. This position works collaboratively with warehouse staff, volunteers, and Operations Management to ensure the safe, accurate, and efficient handling of products coming in and out of the warehouse. Warehouse Support plays an important role in maintaining food safety, cleanliness, and regulatory compliance for the Food Bank. KEY RESPONSIBILITIES • Order Fulfillment & Distribution Support, • Support order selection activities as needed by accurately and efficiently picking, staging, and preparing orders for outbound deliveries., • Assist with staging and movement of product to ensure timely and accurate distribution., • Assist fulfillment team with order picks that may include dry, perishable or freezer products. Receiving & Inventory Support • Support receiving by unloading trailers, breaking down inbound shipments, and moving product from the dock., • Assist with receiving and unloading retail damaged loads in compliance with regulatory agency requirements and Foodlink receiving procedures., • Inspect incoming products for signs of contamination or food safety concerns and report issues promptly., • Assist with thorough and accurate receiving documentation and submit reports to the Receiving Coordinator., • Assist with replenishment of product to the correct bulk and/or pick bins., • Assist Operations leadership with inventory reconciliation and physical inventory counts, including month-end, quarterly, and year-end counts. Volunteer & Sort Support • Work in coordination with the Volunteer Operations Manager to organize, stage, and move pallets during volunteer sort activities., • Assist with set-up, product movement, and post-sort pallet put-away in designated warehouse locations., • Support volunteers as needed by providing clear direction and ensuring safe work practices during sort activities. Safety, Sanitation & Compliance • Maintain a clean, safe, and sanitary warehouse environment in accordance with food safety protocols, AIB standards, and regulatory requirements., • Properly dispose of waste and recyclables and maintain organization throughout the warehouse., • Complete all required opening and closing checklists related to cleanliness, safety, and sanitation., • Work collaboratively with Operations Management and the Safety & Compliance team to support compliance with all warehouse safety and food safety standards. General Warehouse Support • Maintain warehouse supplies and equipment and report maintenance needs as appropriate., • Operate forklifts, electric pallet jacks, and warehouse equipment safely and in accordance with Foodlink policies., • Represent Foodlink professionally when interacting with donors, customers, volunteers, and member agencies., • Perform other duties as assigned to support Food Bank warehouse operations.Requirements: QUALIFICATIONS • High school diploma or GED or equivalent combination of education and experience., • 3-5 years prior warehouse experience required., • Forklift (sit-down and stand-up) and electric pallet jack certification required., • Knowledge of warehouse safety, sanitation, and food handling standards., • Ability to follow oral and written instructions accurately., • Ability to communicate clearly and concisely, both verbally and in writing., • Ability to work effectively both independently and as part of a team., • Demonstrated time management skills and the ability to perform routine problem-solving., • Ability to train and provide directions to volunteers and/or staff as needed., • Willingness and ability to work in a fast-paced warehouse environment. We are actively seeking a diverse pool of candidates for this position and strongly encourage applications from candidates of color. SALARY AND BENEFITS This is a full-time, non-exempt position ranging from $19.50 - $24.75 per hour depending on experience. Foodlink covers 100% of individual health and dental insurance with the ability to acquire family coverage with pretax dollars. In addition to generous paid time off (PTO), we observe 14 paid holidays throughout the year. Opportunity to contribute to a 401k retirement savings plan upon hire. Eligible for generous employer match after 1 year of service. HYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand and talk and hear. The employee is frequently required to use hands to handle or feel items. The employee is frequently required to stand and walk for long periods of time. Specific vision abilities required by this job include close vision, color vision and ability to adjust focus. Able to lift bulk objects or objects weighing up to 60 pounds. WORK ENVIRIONMENT The work environment characteristics described here are representative of those a team member encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. This is a warehouse work environment with variable sound levels from quiet to loud at times. Note: The above description is illustrative of tasks and responsibilities. It is not meant to be all- inclusive. Employees will follow other instructions and perform other related duties as required. Diversity, Equity, & Inclusion Foodlink is committed to fostering, cultivating, and preserving a culture of diversity, equity, and inclusion. At Foodlink we believe that anti-hunger work is only possible with a commitment to removing barriers caused by systems of oppression that perpetuate hunger and poverty. We recognize that systematic injustice and bias disproportionately impact some identities more than others. Foodlink is actively working to center equity- the fair treatment of all people- in everything that we do so that everyone in our region has access to nourishing food that reflects and values cultural differences. Foodlink is committed to listening and supporting solutions to hunger that are sourced from people and communities with lived/living experience of hunger and poverty, and to responding where inequities exist. Foodlink is committed to taking great care to cultivate internal culture and practices that support diversity and inclusion. We embrace and encourage our employees’ differences in age, color, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics that make our employees unique. We aim to foster an environment in which everyone feels a sense of belonging and understands their connection to the Foodlink mission. Foodlink employees have a responsibility to always treat others with dignity and respect. Employees are expected to always exhibit conduct that reflects our values and promotes equity and inclusion during work, and at work functions.

Job Description Why Palmer Food Services: We offer competitive wages and a generous benefit package that contributes a significant amount to your total compensation and your personal well-being. Additionally, there are opportunities to distinguish yourself and move up in our established company through excellent performance and by contributing to our company mission, vision, and values. We value each member of our diverse and talented team - because at Palmer Food Services, our associates are our unfair advantage. What we Value: • Honesty & Integrity, • Service & Excellence, • Collaboration & Teamwork, • Family & Community, • Dependability & Loyalty, • Compassion Roles and Responsibilities: • Live the company’s values by displaying our high standard characteristics and behaviors that lead to our collective success as outlined in our Values in Action., • Performs all care and cleaning functions of the warehouse including but not limited to: sweeping, vacuuming, mopping, dusting, scrubbing, power washing, and polishing both inside and outside of the building., • Follows procedures for the use of chemical cleaners and power equipment., • Mixes water and detergents in containers to prepare cleaning solutions, according to specifications., • Requests supplies as needed., • Utilizes compactor and removes trash from various storage areas., • Utilizes bailer for cardboard., • Operates pallet jacks and other equipment in a safe and professional manner., • Assists in special cleaning projects assigned by Manager., • Stacks and organizes pallets, this includes loading and storage., • Communicates and cleans any spills in multiple warehouse storage areas. Qualifications: • Must have basic reading, writing and math skills. High school diploma/GED required., • Must be able to lift up to 100 pounds., • High attention to detail and accuracy., • Strong communication skills., • Ability to work in various adverse conditions such as tight or enclosed spaces, heights, and temperature extremes, indoors or outdoors., • 1-2 years of related experience preferred Salary: $17.00- $18.00/ Hour Shift: Monday through Friday 8:00 AM- 4:30 PM Physical Demands: The physical demands described below are representative of those that must be met by a Warehouse Image Control Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to stand, walk, stoop, bend, kneel, sit, operate warehouse, • Must be able to use hands to handle and feel objects, perform fine finger movements, reach with hands and arms, and have the ability to see, talk, and hear., • Must be able to regularly lift and carry up to 100 lbs on a regular basis, • Ability to work in a cold environment for extended periods with temperatures reaching -10, • Possess normal vision with or without correction and able to distinguish colors, • Possess fluent speech in English, writing and communication skills necessary to effectively carry out job functions Benefits of Working Full- Time at Palmers: • Medical, Dental and Vision Insurance, • Paid Benefit Time (PTO, Holiday and Sick), • 401k Retirement Plan with Employer Matching, • Eligibility for Annual Profit-Sharing Bonus, • 15% Employee Discount on Retail Grocery Items (Includes Fresh Meat & Seafood), • Associate Discounts on Warehouse Food Products, • Employee Appreciation Events, • And much more #LP