Trabajos general engineer en Clifton, New JerseyCrear alertas

Job Description REMOTE POSITION, BUT CANDIDATE MUST RESIDE IN NEW JERSEY AND BE AVAILABLE FOR OCCASIONAL SITE VISITS IN NYC/NORTHERN NJ. Compensation is negotiated as a lump-sum fee for each assigned project or scope of work, based on the project scope, schedule, and responsibilities. This is not an hourly employee position. Project workload will vary, and no minimum number of projects or amount of work is guaranteed. Our goal is to develop long-term relationships with strong freelance professionals who can become regular members of AEP's extended project team. Qualified contractors may be added to our team for future assignments and contacted as suitable projects become available. Work is primarily performed from home. Occasional site visits in Northern NJ and NYC are required AEP Engineering, LLC is a growing MEP engineering consulting firm seeking an experienced, highly reliable U.S.-based freelance Plumbing / Fire Protection / Sprinkler Designer within practical driving distance of the New York City / Northern New Jersey metropolitan area to support commercial and residential building projects. This is a 1099 independent-contractor position only. We are looking for an established freelancer or independent professional with meaningful availability for ongoing project work. This is not intended as a moonlighting position for someone whose full-time employment will take priority over AEP projects. The right person will become a trusted recurring member of our extended project team and will be expected to take ownership of assigned work, meet commitments, and communicate proactively. Responsibilities Typical responsibilities may include: • Develop plumbing and fire-protection designs from architectural backgrounds, project criteria, and direction from AEP, • Develop domestic cold- and hot-water distribution systems, • Develop sanitary waste and vent systems, • Develop storm-drainage systems where applicable, • Develop natural-gas distribution systems where applicable, • Perform plumbing fixture-unit, water-demand, sanitary, storm, and gas-load calculations, • Size piping and related plumbing-system components, • Design domestic water-heating systems and select equipment, • Develop plumbing riser diagrams and schematics, • Coordinate plumbing requirements for architectural, mechanical, electrical, kitchen, specialty, and other equipment, • Develop fire-protection and sprinkler-system layouts where included in the project scope, • Determine applicable sprinkler design criteria, hazard classifications, design densities, coverage requirements, and system requirements, • Develop sprinkler head layouts, piping arrangements, risers, standpipes, and related fire-protection systems as applicable, • Develop fire-protection performance criteria and coordinated design drawings for delegated-design sprinkler systems where appropriate, • Perform or assist with sprinkler hydraulic calculations where required, • Review available water-supply information and identify when additional flow-test or utility information is required, • Coordinate fire-protection systems with architectural, structural, mechanical, electrical, fire alarm, and plumbing disciplines, • Prepare plumbing and fire-protection plans, schedules, risers, details, notes, and specifications, • Assist with equipment selections and technical product review, • Identify coordination conflicts and missing information before they affect the project, • Incorporate review comments and revisions, • Perform self-QA/QC before submitting work for AEP review, • Assist with responses to contractor, architect, and client technical questions as required What We Are Looking For We are looking for a designer, not simply a CAD operator. The ideal candidate can receive architectural backgrounds and project requirements, understand the design intent, determine what needs to be done, and independently develop coordinated plumbing and fire-protection designs without requiring every pipe, fixture connection, valve, sprinkler head, riser, and note to be individually marked up. Technical ability is important, but reliability, communication, and ownership are equally important to us. We are specifically looking for someone who: • Treats agreed project deadlines as firm commitments, • Does not place AEP projects on the back burner because another client becomes more urgent, • Communicates immediately if an issue could affect scope, schedule, or quality, • Proactively identifies missing information, coordination issues, design concerns, and potential problems, • Asks questions early rather than allowing uncertainty to become a last-minute issue, • Takes ownership of assigned work from start through completion, • Is receptive to feedback and willing to learn AEP's preferred design standards, procedures, and workflows, • Reviews their own work carefully before submitting it, • Communicates clearly and professionally, • Is reasonably available during normal U.S. business hours Qualifications • Professional experience designing plumbing systems for buildings, • Professional experience with fire-protection and sprinkler-system design, • Strong AutoCAD skills, • Experience producing permit and construction-document drawing sets, • Knowledge of domestic water, sanitary, vent, storm, natural gas, and domestic water-heating systems, • Experience performing plumbing sizing and demand calculations, • Working knowledge of sprinkler-system design, hazard classifications, densities, sprinkler coverage requirements, piping arrangements, and hydraulic principles, • Familiarity with standpipe systems and fire-service requirements where applicable, • Ability to distinguish between engineer-of-record design requirements and delegated sprinkler-contractor design responsibilities, • Ability to read and coordinate architectural and other engineering drawings, • Strong written and verbal English communication, • Ability to work independently and remotely, • U.S.-based, • Experience with commercial, multifamily residential, healthcare, retail, office, renovation, and/or new-construction projects is preferred, • Working knowledge of the IBC, IPC, applicable fuel-gas codes, NFPA 13, NFPA 13R, NFPA 14, and the NYC Building and Plumbing Codes is required. Candidates must understand the major code sections, know how they affect their design, when they apply, and know how to efficiently locate and interpret applicable code requirements when asked., • Familiarity with NYC fire-protection requirements and FDNY-related requirements is strongly preferred, • PE licensure is not required for this position Site Survey / Local Travel Requirement This is a remote freelance position, but candidates must be located within reasonable driving distance of AEP's primary New York/New Jersey project area and must be willing and able to travel to project sites as needed. Responsibilities may include: • Conducting existing-condition and due-diligence site surveys, • Documenting existing plumbing fixtures, piping, water services, sanitary and storm systems, gas services, sprinkler systems, standpipes, fire services, and related building conditions, • Taking field measurements, photographs, pipe-size information, equipment information, and utility information, • Identifying visible conflicts, deficiencies, and conditions that may affect the proposed design, • Organizing field notes and survey information for use in design, • Communicating significant field findings promptly to AEP Candidates must have: • Reliable transportation, • A valid driver's license, • Ability and willingness to travel to project sites in New Jersey, New York City, and surrounding areas, • Confidence working independently in occupied and unoccupied buildings, • Ability to conduct thorough, organized field surveys without requiring constant direction Software and Equipment Requirements As an independent contractor, you must provide and maintain your own: • Computer and related hardware, • Reliable high-speed internet connection, • AutoCAD software suitable for performing the required work, • Microsoft 365 software, including Word, Excel, Outlook/email, and other standard office applications, • Professional email and reliable phone/online communication capability, • Any other general software and equipment normally required to perform your freelance design work AEP does not provide computer hardware, Microsoft 365 licenses, AutoCAD licenses, or general office equipment for this independent-contractor position. Contractor Relationship This is a remote 1099 freelance independent-contractor relationship. Project workload will vary, and no minimum number of hours or projects is guaranteed. Our objective is to develop long-term relationships with strong freelance professionals who can become regular contributors to AEP projects as our workload continues to grow. Work will be assigned on a project or task basis, with scope, schedule, and compensation established for each assignment. To Apply Please submit your resume and briefly answer the following: • How many years of plumbing design experience do you have?, • How many years of fire-protection/sprinkler design experience do you have?, • Do you currently work as a freelancer or independent contractor?, • What types of building projects do you have the most experience designing?, • Are you able to independently develop plumbing designs from architectural backgrounds and project criteria?, • Are you able to independently develop sprinkler layouts and fire-protection design criteria?, • Do you perform sprinkler hydraulic calculations yourself?, • How familiar are you with NFPA 13, NFPA 13R, NFPA 14, and NYC plumbing/fire-protection requirements?, • What version of AutoCAD do you currently use?, • Approximately how much availability do you typically have each week?, • What hours are you generally available during the U.S. workday?, • Are you located in the United States?, • What is your typical hourly rate or preferred project-based compensation?\nCompany Description AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area. AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area.

Job Description Millwork Engineer / CAD Designer Employment Type: Full-Time Schedule: Monday-Friday, 7:00 AM-4:00 PM Work Location: On-Site Compensation: Competitive, based on experience Position Overview We are seeking a skilled Millwork Engineer / CAD Designer to join our team and support the production of architectural woodworking and millwork projects from design through manufacturing and installation. This position is responsible for taking architectural drawings and developing detailed shop drawings for review and approval by architects, general contractors, construction managers, and customers. Approved drawings are then used by our CNC operators, bench carpenters, and installation crews to bring the project to completion. The ideal candidate will have a strong command of AutoCAD combined with hands-on knowledge of woodworking, cabinetry, carpentry, or architectural millwork. Experience with CNC programming software is highly beneficial, but we are willing to train the right candidate who has the necessary AutoCAD and woodworking foundation. We are looking for someone who can work efficiently, demonstrate a sense of urgency, communicate effectively, and take ownership of their work with minimal supervision. Key Responsibilities • Draft and review detailed AutoCAD shop drawings for architectural woodworking and millwork projects., • Interpret architectural drawings, plans, and specifications and translate them into accurate, production-ready shop drawings., • Coordinate drawings and details to ensure designs are practical for manufacturing, fabrication, and installation., • Prepare CNC machine programs using CAD/CAM software such as WoodWOP, WoodCAD|CAM, and CutRite., • Coordinate with CNC operators, bench carpenters, installers, project managers, and other team members throughout the production process., • Revise drawings based on architect, customer, GC/CM, and internal feedback., • Ensure drawings and CNC programs accurately reflect project requirements and approved designs., • Identify potential fabrication or installation issues before they reach production., • Manage assigned projects and tasks efficiently while maintaining accuracy and attention to detail., • Work independently and complete assignments without requiring constant direct supervision., • Maintain a strong sense of urgency while meeting project deadlines and production schedules.QualificationsRequired, • Strong proficiency in AutoCAD., • Working knowledge of woodworking, cabinetry, carpentry, or architectural millwork., • Ability to read and interpret architectural drawings and construction documents., • Strong attention to detail and ability to produce accurate technical drawings., • Ability to work independently and prioritize multiple tasks., • Strong communication and teamwork skills., • Positive attitude and willingness to learn., • Strong work ethic and a sense of urgency.Preferred, • Experience with WoodCAD|CAM., • Experience with Microvellum / iX., • Experience with WoodWOP or CutRite., • Previous experience programming CNC machinery for woodworking or millwork applications., • Experience producing shop drawings for architectural millwork or custom woodworking projects.Education & Experience A two-year degree is not required for this position. We are primarily interested in what you can do, not simply what is listed on your résumé. Candidates who can demonstrate strong AutoCAD skills, understand woodworking and millwork, and effectively communicate within a manufacturing and construction environment will be considered. We are willing to train the right candidate on CNC programming and our specific CAD/CAM software if they already possess a strong foundation in AutoCAD and woodworking. What We're Looking For The successful candidate will be someone who: • Takes ownership of their work., • Can perform assigned tasks with minimal supervision., • Works efficiently and with a sense of urgency., • Has a strong attention to detail., • Is comfortable working in a fast-paced production environment., • Communicates well with teammates and other project stakeholders., • Has a positive, team-oriented attitude., • Is willing to learn new software and processes., • Understands that accuracy in the engineering and drafting process directly impacts fabrication, CNC production, and field installation.Compensation & Benefits, • Competitive compensation based on experience., • Full health benefits., • Paid Time Off (PTO)., • 401(k)., • Full-time, Monday-Friday schedule., • Opportunity to develop additional expertise in CNC programming, CAD/CAM, and architectural millwork engineering. If you have a strong AutoCAD background and understand woodworking or millwork, we want to hear from you. CNC programming expertise is a plus, but we are willing to train the right person.

Job Description Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge and technology power our connected ecosystem of health, safety and security solutions and services. POSITION SUMMARY As an Applications Engineer, you will need to formulate an engineered estimate and or budget for new and existing clients that shall be provided by consultants, engineers, construction managers, general contractors and also from in-house Sales Representatives, Key Account Representatives and or Project Managers. SCOPE OF RESPONSIBILITY • Analyze and interpret blueprints, specifications, and scope documents for fire and security system projects., • Prepare detailed cost estimates for labor, materials, and equipment for alarm systems, CCTV, access control, and other low-voltage installations., • Conduct take-offs and identify potential value-engineering alternatives to reduce costs without sacrificing quality., • Collaborate with vendors and subcontractors to source competitive pricing., • Develop bid proposals, ensuring all required documentation is submitted on time., • Partner with sales and project management teams to ensure seamless project handoffs., • Maintain an up-to-date pricing database., • Keep current with changes in industry codes, technology advancements, and competitive practices. Qualifications • Minimum 5 years of experience estimating in the fire alarm and/or security/low voltage field., • Education BA Business/ BS Engineering/MS Engineering or applicable amount of experience in the appropriate field may be substituted for the educational background, • Strong understanding of relevant codes, including NFPA and NEC., • Ability to read and interpret detailed construction drawings and scope documentation., • Experience working with major manufacturers (e.g., Silent Knight, Firelite, Bosch, Hanwha, Avigilon, Axis, Genetec, Lenel, and others)., • High level of organization and accuracy with strong attention to detail., • Excellent communication and time management skills., • NICET Certification- Fire Alarm Systems Level III or higher, preferred., • Computer skills to include:, • MS Office, • Acrobat, • Visio, • DWG Writer, • Big Machines, • Sales Force dot com ESSENTIAL FUNCTIONS • Product selection and application (to ensure the right product is used in the right application) while maintaining adherence to Securitas’s product selection process and design standards., • Estimate installation costs in conjunction with Implementation Operations, Service Operations, Internal Labor and External Labor, • Review of Field Site Survey documents and drawings., • Supports the RFI, RFP, RFQ and RFM&S process as needed, • Create estimates and budgets for access control, intrusion, CCTV, intercom, PSIM, PLC and structured cabling systems, • Review architectural, electrical, telecommunication, security engineering floor plans, riser drawings, device schedules, detail drawings, interconnect and closet layout drawings., • Interpret specifications, addendums, revisions, sketches and Scope of work., • Work with project managers and design engineers for creating change orders on existing and ongoing projects., • Manage assigned projects and maintain deadlines for each project., • Build and maintain a good relationship with coworkers, suppliers and manufacturers., • Create a detailed list of clarifications, exclusions & compliance on a per project basis, • Knowledge of construction schedules, project meetings and how they pertain and impact the project., • Able to research product information utilizing the internet, • Excellent working knowledge of construction industry conventions, • Good understanding of workload and the requirements to maintain commitments., • Ability to navigate high value job environment for time lines, and compliance requirements, • Firm grasp of the competitive environment and strategic plays by competitors, • Excellent command and knowledge of building code requirements Securitas Technology Offers Comprehensive Benefits Including • Opportunity for annual merit pay increases, • Paid company training, • Medical, Dental, Vision, Life, Critical Illness, and Hospital Indemnity Coverage, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance., • Look for opportunities to help work get done safer, faster and more cost effectively. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology — video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you’re an installation technician, service technician, engineer, or project manager, you’ll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal—build a meaningful career while protecting what matters most through innovative security technology. Job Description What to expect as a Commercial Security Installation Technician III: • Assist the Project Manager regarding on-site scheduling of work activities and timely delivery of equipment, • Responsible for the connection of control panels, application requirements, wire concealment, and security software installation, • Install, program and configure commercial electronic security systems for enterprise commercial clients (door access control, CCTV, intrusion detection, low voltage communication, electronic locks, point sensors, signaling devices, ect.), • Troubleshoot new installations to ensure the systems are functioning properly and satisfy codes, • Demonstrate Allied Universal’s core values as a highly skilled leader on the Installation Team, • Supervise several teams comprised of Security Installation Technician I’s and II’s, • Manage several medium- to large-sized jobs simultaneously, doing so within approved hours and margin tolerances, • Drive to client sites with a company-issued vehicle to perform the system installation and confirm the system is operating effectively and meets contract requirements, • Installation of electrical wiring, panels, cables, and security devices, • Completes miscellaneous tasks as assigned by manager What knowledge and skills are required: • A high school diploma or equivalent is required, • Minimum 2-3 years of experience in the physical security, fire alarm or low voltage communication industry installing field devices, programming systems, and running medium- to large-sized jobs, are required, • Experience with any or all of the following is preferred: Software House, Lenel, AMAG, S2, Brivo, Milestone, Exacq, Axis, Bosch, Commend, DMP, Open Options, Notifier, Fluidmesh or ONSSI, • Possess or have the ability to obtain proper state licensing once hired (Low Voltage D license, Alarm Installer Lic. etc.), • Ability to meet deadlines and work in a fast-based environment with minimum direction, • Good communication skills for effective interaction with internal and external customers, • Strong troubleshooting skills and mechanical aptitude, • Ability to be on-call on a rotational basis, • Must be detail-oriented and organized Must possess a valid driver’s license with at least one year of driving experience, a clean driving record (no major violations within the last 36 months, no more than 1 accident in last 24 months, no more than one minor moving violation in last 24 months), a minimum level of insurance as required by company policy, and the ability to safely operate a vehicle. • Ability to complete time entry from home on a daily basis via the Internet, • Ability to deliver product familiarization training to end-users, • Strong proficiency in Microsoft Office products (Word, Excel, and Project), • Ability and track record of successfully loading servers with third-party applications and deploying IP video solutions, • Possess general working knowledge of network architecture, • Overnight travel may be required on an as-need basis BENEFITS: • Salary range: $35 - $45 hourly, • Medical, dental, vision, retirement plan, basic life, AD&D, and disability insurance, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time is offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-26 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices. Requisition ID 2026-1644978

Job Description Millwork Engineer / CAD Designer Employment Type: Full-Time Schedule: Monday-Friday, 7:00 AM-4:00 PM Work Location: On-Site Compensation: Competitive, based on experience Position Overview We are seeking a skilled Millwork Engineer / CAD Designer to join our team and support the production of architectural woodworking and millwork projects from design through manufacturing and installation. This position is responsible for taking architectural drawings and developing detailed shop drawings for review and approval by architects, general contractors, construction managers, and customers. Approved drawings are then used by our CNC operators, bench carpenters, and installation crews to bring the project to completion. The ideal candidate will have a strong command of AutoCAD combined with hands-on knowledge of woodworking, cabinetry, carpentry, or architectural millwork. Experience with CNC programming software is highly beneficial, but we are willing to train the right candidate who has the necessary AutoCAD and woodworking foundation. We are looking for someone who can work efficiently, demonstrate a sense of urgency, communicate effectively, and take ownership of their work with minimal supervision. Key Responsibilities • Draft and review detailed AutoCAD shop drawings for architectural woodworking and millwork projects., • Interpret architectural drawings, plans, and specifications and translate them into accurate, production-ready shop drawings., • Coordinate drawings and details to ensure designs are practical for manufacturing, fabrication, and installation., • Prepare CNC machine programs using CAD/CAM software such as WoodWOP, WoodCAD|CAM, and CutRite., • Coordinate with CNC operators, bench carpenters, installers, project managers, and other team members throughout the production process., • Revise drawings based on architect, customer, GC/CM, and internal feedback., • Ensure drawings and CNC programs accurately reflect project requirements and approved designs., • Identify potential fabrication or installation issues before they reach production., • Manage assigned projects and tasks efficiently while maintaining accuracy and attention to detail., • Work independently and complete assignments without requiring constant direct supervision., • Maintain a strong sense of urgency while meeting project deadlines and production schedules.QualificationsRequired, • Strong proficiency in AutoCAD., • Working knowledge of woodworking, cabinetry, carpentry, or architectural millwork., • Ability to read and interpret architectural drawings and construction documents., • Strong attention to detail and ability to produce accurate technical drawings., • Ability to work independently and prioritize multiple tasks., • Strong communication and teamwork skills., • Positive attitude and willingness to learn., • Strong work ethic and a sense of urgency.Preferred, • Experience with WoodCAD|CAM., • Experience with Microvellum / iX., • Experience with WoodWOP or CutRite., • Previous experience programming CNC machinery for woodworking or millwork applications., • Experience producing shop drawings for architectural millwork or custom woodworking projects.Education & Experience A two-year degree is not required for this position. We are primarily interested in what you can do, not simply what is listed on your résumé. Candidates who can demonstrate strong AutoCAD skills, understand woodworking and millwork, and effectively communicate within a manufacturing and construction environment will be considered. We are willing to train the right candidate on CNC programming and our specific CAD/CAM software if they already possess a strong foundation in AutoCAD and woodworking. What We're Looking For The successful candidate will be someone who: • Takes ownership of their work., • Can perform assigned tasks with minimal supervision., • Works efficiently and with a sense of urgency., • Has a strong attention to detail., • Is comfortable working in a fast-paced production environment., • Communicates well with teammates and other project stakeholders., • Has a positive, team-oriented attitude., • Is willing to learn new software and processes., • Understands that accuracy in the engineering and drafting process directly impacts fabrication, CNC production, and field installation.Compensation & Benefits, • Competitive compensation based on experience., • Full health benefits., • Paid Time Off (PTO)., • 401(k)., • Full-time, Monday-Friday schedule., • Opportunity to develop additional expertise in CNC programming, CAD/CAM, and architectural millwork engineering. If you have a strong AutoCAD background and understand woodworking or millwork, we want to hear from you. CNC programming expertise is a plus, but we are willing to train the right person.

Job Description Millwork Engineer / CAD Designer Employment Type: Full-Time Schedule: Monday-Friday, 7:00 AM-4:00 PM Work Location: On-Site Compensation: Competitive, based on experience Position Overview We are seeking a skilled Millwork Engineer / CAD Designer to join our team and support the production of architectural woodworking and millwork projects from design through manufacturing and installation. This position is responsible for taking architectural drawings and developing detailed shop drawings for review and approval by architects, general contractors, construction managers, and customers. Approved drawings are then used by our CNC operators, bench carpenters, and installation crews to bring the project to completion. The ideal candidate will have a strong command of AutoCAD combined with hands-on knowledge of woodworking, cabinetry, carpentry, or architectural millwork. Experience with CNC programming software is highly beneficial, but we are willing to train the right candidate who has the necessary AutoCAD and woodworking foundation. We are looking for someone who can work efficiently, demonstrate a sense of urgency, communicate effectively, and take ownership of their work with minimal supervision. Key Responsibilities • Draft and review detailed AutoCAD shop drawings for architectural woodworking and millwork projects., • Interpret architectural drawings, plans, and specifications and translate them into accurate, production-ready shop drawings., • Coordinate drawings and details to ensure designs are practical for manufacturing, fabrication, and installation., • Prepare CNC machine programs using CAD/CAM software such as WoodWOP, WoodCAD|CAM, and CutRite., • Coordinate with CNC operators, bench carpenters, installers, project managers, and other team members throughout the production process., • Revise drawings based on architect, customer, GC/CM, and internal feedback., • Ensure drawings and CNC programs accurately reflect project requirements and approved designs., • Identify potential fabrication or installation issues before they reach production., • Manage assigned projects and tasks efficiently while maintaining accuracy and attention to detail., • Work independently and complete assignments without requiring constant direct supervision., • Maintain a strong sense of urgency while meeting project deadlines and production schedules.QualificationsRequired, • Strong proficiency in AutoCAD., • Working knowledge of woodworking, cabinetry, carpentry, or architectural millwork., • Ability to read and interpret architectural drawings and construction documents., • Strong attention to detail and ability to produce accurate technical drawings., • Ability to work independently and prioritize multiple tasks., • Strong communication and teamwork skills., • Positive attitude and willingness to learn., • Strong work ethic and a sense of urgency.Preferred, • Experience with WoodCAD|CAM., • Experience with Microvellum / iX., • Experience with WoodWOP or CutRite., • Previous experience programming CNC machinery for woodworking or millwork applications., • Experience producing shop drawings for architectural millwork or custom woodworking projects.Education & Experience A two-year degree is not required for this position. We are primarily interested in what you can do, not simply what is listed on your résumé. Candidates who can demonstrate strong AutoCAD skills, understand woodworking and millwork, and effectively communicate within a manufacturing and construction environment will be considered. We are willing to train the right candidate on CNC programming and our specific CAD/CAM software if they already possess a strong foundation in AutoCAD and woodworking. What We're Looking For The successful candidate will be someone who: • Takes ownership of their work., • Can perform assigned tasks with minimal supervision., • Works efficiently and with a sense of urgency., • Has a strong attention to detail., • Is comfortable working in a fast-paced production environment., • Communicates well with teammates and other project stakeholders., • Has a positive, team-oriented attitude., • Is willing to learn new software and processes., • Understands that accuracy in the engineering and drafting process directly impacts fabrication, CNC production, and field installation.Compensation & Benefits, • Competitive compensation based on experience., • Full health benefits., • Paid Time Off (PTO)., • 401(k)., • Full-time, Monday-Friday schedule., • Opportunity to develop additional expertise in CNC programming, CAD/CAM, and architectural millwork engineering. If you have a strong AutoCAD background and understand woodworking or millwork, we want to hear from you. CNC programming expertise is a plus, but we are willing to train the right person.

Job Description Join our new hotel as the Chief Engineer. The hotel chief engineer manages all property maintenance, building systems, and engineering staff to ensure guest safety, comfort, and operational efficiency. Compensation: $80,000 - $100,000 yearly Responsibilities: Facility Maintenance: Oversee repairs for HVAC, plumbing, electrical, refrigeration, and general building structures. Preventive Maintenance: Run routine inspection schedules for guest rooms, public areas, and critical equipment. Safety & Compliance: Test life safety systems, fire alarms, and emergency lights, ensuring compliance with local building and health codes. Staff Leadership: Hire, train, schedule, and supervise maintenance technicians and engineering teams. Budget & Capital Projects: Manage department expenses, track utility consumption, and plan facility improvement projects. Qualifications: Experience: Typically 2 to 5 years of hands-on maintenance experience, with prior supervisory or director-level hospitality experience. Technical Skills: Strong working knowledge across multiple trades, such as electrical, plumbing, and mechanical troubleshooting. Certifications: Valid state or local safety certifications (such as a Fire and Life Safety Director certification) depending on regional requirements. About Company Find us right on Route 3 in Clifton, close to New Jersey’s best attractions. We’re five miles from American Dream’s retail and entertainment complex and The Meadowlands Sports Complex, home to MetLife Stadium. New York City is just 10 miles away.

Job Description CoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at www.coreweave.com. What You'll Do: CoreWeave is scaling a portfolio of mission-critical data center infrastructure to support the performance, reliability, and speed required for AI and high-performance computing workloads. Our teams partner across design, construction, commissioning, networking, and operations to bring new capacity online safely and at scale. The Principal Operational Readiness Engineer will serve as a senior technical leader responsible for stabilizing and driving execution of complex data center projects across CoreWeave's infrastructure portfolio. About the role: This role is focused on design compliance, operational readiness, and cross-functional coordination across all phases of design, construction, commissioning, fit-out, and operational handoff. The Principal Operational Readiness Engineer will perform deep operational and technical reviews of projects to identify gaps in process execution, design validation, construction coordination, turnover readiness, and quality assurance practices. You will evaluate whether critical infrastructure systems, construction activities, commissioning efforts, and operational handoff procedures are being executed in accordance with project requirements, standards, and best practices. This individual must be comfortable rapidly assessing current-state execution, identifying risk, and driving actionable mitigation and recovery plans to resolution. In this role, you will: • Perform deep operational and technical reviews of active projects to identify gaps in design validation, process execution, construction coordination, turnover readiness, and quality assurance., • Assess whether critical infrastructure systems, construction activities, commissioning efforts, and operational handoff procedures are being executed in accordance with project requirements, standards, and best practices., • Identify deficiencies, breakdowns in coordination, incomplete validations, and missing controls that could impact schedule, reliability, scalability, or operational readiness., • Develop and drive corrective action, mitigation, and recovery plans through resolution for distressed or high-risk infrastructure projects., • Partner closely with Design, Construction, Operations, Network Engineering, Commissioning, and external contractors to improve coordination, strengthen execution discipline, and ensure projects are delivered to CoreWeave's operational and technical standards., • Review project documentation including construction drawings, MEP designs, RFIs, submittals, schedules, turnover packages, and change orders to validate project readiness and execution quality. Monitor project dependencies, sequencing, and critical path risks across large-scale data center build and fit-out programs. • Support the successful turnover of projects into operations by validating readiness, identifying gaps, and driving issue resolution before handoff.Who You Are:, • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Construction Management, or a related technical discipline. 15+ years of experience in data center design, construction, commissioning, or operational readiness within mission-critical environments. • Strong technical understanding of mechanical and electrical infrastructure systems including power distribution, cooling systems, controls, generators, UPS systems, and critical plant operations. Proven experience managing distressed or high-risk infrastructure projects and driving corrective action plans to successful completion. • Demonstrated ability to rapidly assess active project sites, identify execution risks, and develop mitigation and recovery strategies., • Deep knowledge of construction sequencing, scheduling, turnover planning, and fit-out coordination for large-scale data center projects., • Demonstrated experience coordinating across design teams, general contractors, commissioning agents, vendors, and operations organizations., • Strong understanding of project scheduling methodologies, construction dependencies, and critical path management. Experience reviewing and interpreting construction drawings, MEP designs, RFIs, submittals, and change orders. • Proficiency with project management and scheduling tools such as Primavera P6, Microsoft Project, Smartsheet, or similar platforms. Ability to lead technical issue resolution and drive decision-making across multiple stakeholder groups in dynamic project environments.Preferred: • Professional Engineer (PE), PMP, or commissioning-related certification., • Experience supporting hyperscale, HPC, or AI-focused data center environments., • Familiarity with commissioning processes, integrated systems testing (IST), and operational turnover procedures., • Experience working across global or multi-region data center deployment programs., • Knowledge of industry standards including Uptime Institute, NFPA, ASHRAE, and IEEE. Wondering if you're a good fit? We believe in investing in our people, and value candidates who can bring their own diversified experiences to our teams – even if you aren't a 100% skill or experience match. Here are a few qualities we've found compatible with our team. If some of this describes you, we'd love to talk. • You love stepping into complex projects and bringing structure to chaotic environments., • You're curious about improving operational readiness and infrastructure delivery at scale., • You're an expert in mission-critical infrastructure systems, construction coordination, and project recovery execution.Why CoreWeave? At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences, • Achieve More Together We support and encourage an entrepreneurial outlook and independent thinking. We foster an environment that encourages collaboration and enables the development of innovative solutions to complex problems. As we get set for takeoff, the organization's growth opportunities are constantly expanding. You will be surrounded by some of the best talent in the industry, who will want to learn from you, too. Come join us! The base salary range for this role is $198,000 to $264,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs. The benefits below reflect our US-based offerings for full-time employees; for roles in other locations, benefits vary and are shared during the hiring process. These include: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment, • A work culture focused on innovative disruption California Applicants California Consumer Privacy Act Equal Opportunity & Accommodations CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: careers@coreweave.com. Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job DescriptionCompany Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities. Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the college completion gap and preparing every student for college and beyond. Our students consistently exceed national benchmarks, reflecting our dedication to their success. We invest deeply in our educators, offering weekly coaching, feedback, and professional development to ensure excellence in teaching and leadership. Join us to work hard, do good, and make a lasting difference! Job Description Uncommon Schools is seeking a HVAC Operating Engineer to join the charter network’s New Jersey Facilities team. This position provides an opportunity for an experienced HVAC Operating Engineer with at least seven (7) years' relevant experience to work with a dedicated facilities group, deepen his/her technical skills, and help ensure that Uncommon provides well-maintained, comfortable, and safe educational facilities for our students and staff. Uncommon’s portfolio in New Jersey comprises buildings constructed from the very early 1900s through the early 2020s, operating HVAC systems dating from 1966 to the recent past few years. As ambient comfort is essential to a productive learning and teaching environment, the impact of this individual’s attentiveness will be felt and deeply appreciated across the region. Reporting to the Senior Manager, Facilities Management Team, the HVAC Operating Engineer will perform all technical work necessary to inspect, maintain, repair, and modify HVAC system in our buildings. With expertise in HVAC – and to a lesser extent in construction and plumbing – in multi-family, schools, and commercial buildings, the successful candidate will be responsible for conducting minor HVAC projects and managing larger ones and ensuring they are completed on time and within budget. The HVAC Operating Engineer will partner with senior Facilities team members and outside consultants on the planning, coordination, and supervision of mechanical construction and repair activities implemented by outside vendors, will ensure project timelines are met and ensure quality control standards are followed, mentor junior staff, and handle all HVAC-related communication with stakeholders. Uncommon values candidates who have the drive and ability to work hard, are highly self-motivated, are eager to take on and implement assignments and projects, and have a strong commitment to customer service and satisfaction. Safe, efficient, healthy, clean, comfortable, and reliable buildings are essential to Uncommon’s mission to deliver an excellent education to our students and a comfortable working environment to our dedicated staff. As a member of the NJ Facilities Team, the HVAC Operating Engineer will: • maintain current knowledge of the National Standard HVAC Code and other applicable building codes and perform all facets of the HVAC trade in accordance with those codes and in a safe and effective manner, • diagnose problems with HVAC systems, evaluate solutions to remedy issues, and provide sound recommendations to supervisors, • in emergency situations take immediate steps to contain the problem and restore the system to sound working condition, • in emergency situations maintain clear and consistent communication with stakeholders to apprise them of steps being taken to address the issue, • troubleshoot and repair all HVAC type systems currently available in the market, • maintain records of corrective and preventive work assignments received through an automated work order system (currently SchoolDude, soon ZenDesk), • assist onsite Facilities Managers and General Maintenance Workers with work projects or special assignments, • respond to campus emergency calls after hours as needed, • perform other duties as assignedQualifications Required Technical Skills: • Significant journeyman-level HVAC experience along with the trade knowledge to effectively understand and perform all facets of the HVAC trade in accordance with the National Standard Plumbing Code and other applicable codes, • Strong background in commercial heating projects large and small, including hot water boilers and gas furnaces, • Ability to read as-built plans for all buildings in portfolio, • Ability to read and interpret construction drawings, specifications, submittals, cut sheets, layouts, technical manuals, schematic drawings, and other HVAC-related trade documents, • Advanced knowledge of BMS systems and system operations, • Ability to procure replacement parts as needed to make all necessary repairs, • Ability to properly and safely use the tools of the trade and carry out all tasks expected of a Snr. HVAC Technician, • Ability to troubleshoot and repair refrigerant-driven cooling and heating equipment (heat pump systems), • Ability to troubleshoot and repair water-driven heating and cooling equipment, • Ability to troubleshoot and repair water or glycol pump systems, • Ability to troubleshoot and service chillers and cooling towers, • Ability to change filters and belts and clean coils as needed to ensure proper functioning of units, • Ability to troubleshoot and implement recommended repair/replacement of, • gas valves, • economizer motors and dampers, • compressors and contactors, • dampers, • chilled water and hot water pumps, • glycol injection units, • Ability to evacuate and top-off units with refrigerant General Technical Skills • Bachelor’s Degree equivalent or seven plus (7+) years of experience in the HVAC field, • Evidence of progressive responsibility and experience in HVAC field, with four plus (4+) years as head technician, • Ability to handle multiple projects simultaneously, • Familiarity with key building systems (HVAC, electrical, mechanical, plumbing), • Familiarity with OSHA and other Life Safety codes, etc., • Computer skills necessary to operate BMS system, • Facility with Microsoft office suite, • Strong organizational skills, attention to detail, and follow-through, • Ability to communicate effectively verbally and electronically with facilities staff, school staff, and vendors, • Available to work nights and weekends when necessary, • Extreme flexibility, with a strong work ethic and an entrepreneurial spirit to accommodate high level of responsibility and multiple priorities, • New Jersey low pressure black seal boiler, HVAC or other certificate, training, or licenses a plus, • Carry a current EPA card enabling technician to dispense of refrigerants, • Valid driver’s license and vehicle, • Strong capacity to operate independently Physical Requirements • The physical requirements outlined below are representative of those that must be met by an employee to successfully perform the essential functions of this position., • Stand or walk for up to two (2) hours at one time, up to eight (8) hours per day, • Sit for fewer than two (2) hours during an eight (8)-hour day, • Lift or carry up to 35 pounds frequently and 100 pounds occasionally, • Lift up to 100 pounds to waist height and up to 35 pounds in a range of motions from floor to overhead, • Frequently use hands for simple grasping, fine manipulation, pushing or pulling, • Occasionally climb stairs or ladders, dig, or pull with forces up to 100 pounds, • Frequently bend, squat, kneel, knee stand, lift overhead, reach overhead, push, or pull, • Work outdoors in a variety of temperatures and environmental conditions, • Possess ability to work at heights, full range of body motions and physical agility, and ability to maintain balance Mission Alignment • Demonstrate a relentless drive to improve the minds and lives of students in and out of school, • Demonstrate a commitment to the schools’ rules, regulations, and safety procedures, • Implement and enhance the school’s systems and culture Create high accountability for oneself as well as for building staff and vendors #ZR Additional Information Our people are what make us Uncommon. We offer competitive compensation and comprehensive benefits that support the personal health, wellness, and finances of our staff and their families. Our compensation philosophy values equity & fairness and attracting & retaining top talent. Compensation Compensation for this role is between $43/hr to $50/hr. Starting pay is determined using various factors including but not limited to relevant professional experience, education, certifications, and tenure with Uncommon Schools. Benefits • Regional staff will have the same holidays and sustainability days as school-based staff in their region, and flexible summer PTO, • Extensive, best-in-class training and development, • Comprehensive health, dental, and vision insurance plans + pre-tax flexible spending (FSA), dependent care (DCFSA), and health saving accounts (HSA), • Financial Planning, • New Jersey Pension program, • Paid leave of absence options (parental, medical, disability, etc.), • Mental health and counseling support + wellness benefits *A detailed list of all benefits is located HERE. At Uncommon, we believe that a supportive and welcoming environment helps our students, staff, and community thrive. We are dedicated to building a team that brings a wide range of perspectives and experiences, reflective of the communities we serve---with over 70% of our staff identifying as people of color. Our organization values respect and open dialogue on important topics that shape our school culture. As an equal opportunity employer, Uncommon provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We also ensure that individuals with disabilities receive all privileges and benefits associated with employment and are provided reasonable accommodations for the interview process and to perform core job functions. If you would like to request an accommodation, please email recruitment@uncommonschools.org.

Job Description Position Title: Manufacturing Engineer II – Energetics & CAD/PAD Salary Range: $85,000 – $105,000 / year Locations: Fairfield, NJ & Byram, NJ (On-site / Multi-facility travel) Employment Type: Full-Time Company Overview We design, develop, and manufacture mission-critical energetic, pyrotechnic, Cartridge Actuated Devices (CAD), and Propellant Actuated Devices (PAD). Our products serve high-consequence applications across aerospace, defense, government, and commercial sectors where ultra-high reliability, precision manufacturing, and strict process repeatability are mandatory. Role Summary The Production Engineer II bridges the gap between design engineering and shop-floor execution. This role is responsible for planning, establishing, and optimizing manufacturing and assembly processes for energetic hardware, custom tooling, and precision-machined components. Working under general direction, the Production Engineer leads Design for Manufacturability (DFM) transitions, designs machine shop fixturing, develops work instructions (routers/SOPs), resolves manufacturing non-conformances (MRB), and drives continuous process improvements within an AS9100 / ISO 9001 quality framework. Key Responsibilities • Manufacturing Process Planning & Routing: Establish, maintain, and optimize manufacturing bills of materials (MBOMs), assembly routers, standard operating procedures (SOPs), and detailed shop floor work instructions., • Tooling & Fixture Engineering: Design and implement custom assembly tooling, machine shop fixtures, energetic loading aids, and inspection gages to enhance manufacturing throughput and operator safety., • New Product Introduction (NPI) & DFM: Partner with Design Engineering during PDR/CDRs to ensure robust Design for Manufacturability (DFM) and Design for Assembly (DFA), executing smooth handoffs from R&D into production., • Discrepancy Resolution & MRB: Act as engineering authority on the Material Review Board (MRB); disposition non-conforming hardware, perform root-cause failure analyses (8D, 5-Why, Fishbone), and implement Corrective and Preventive Actions (CAPA)., • Process Capability & Risk Mitigation: Conduct Process Failure Mode and Effects Analyses (PFMEA) and implement Statistical Process Control (SPC) to minimize variance and eliminate assembly risks in energetic operations., • Machine Shop & Assembly Floor Support: Provide day-to-day technical support to machine shop machinists, assembly technicians, and pyrotechnic handling teams to resolve production bottlenecks and machining/assembly challenges., • Quality & Cybersecurity Standards: Maintain strict adherence to AS9100 / ISO 9001 quality management systems, NIST SP 800-171 / CMMC Controlled Unclassified Information (CUI) safeguarding protocols, and ATF energetic handling regulations. Required Qualifications Education: Bachelor's degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Materials Science, or a related discipline. Experience: 3–5+ years of production, manufacturing, or process engineering experience in precision aerospace, defense, ordnance/energetics, medical device, or high-reliability electromechanical manufacturing. Technical Skills: Proficiency in reading and interpreting complex engineering drawings using ASME Y14.5 GD&T.Experience designing assembly jigs, machining fixtures, or inspection tooling using 3D CAD (SolidWorks preferred).Strong working knowledge of conventional and CNC machining, metal finishing/plating, and precision mechanical assembly methods. Quality & Systems: • Practical experience with ERP/MRP systems (e.g., SAP, SyteLine, Epicor, Sage) for routings, BOMs, and engineering change implementation., • Working knowledge of AS9100 / ISO 9001 quality management systems and structured root-cause problem-solving (8D, CAPA). Legal & Regulatory Requirements: • Must be a U.S. Person (U.S. Citizen or Permanent Resident) to satisfy ITAR and EAR requirements.Must be able to obtain and maintain an ATF Employee Possessor status. Desired Skills & Experience • Machine Shop Proficiency: Hands-on machine shop skills (manual lathe, mill, tooling setup) to evaluate and troubleshoot machining processes directly on the floor., • Energetics Handling: Prior experience with pyrotechnic loading, explosive presses, hermetic sealing, or hazardous material safety standards (DoD 4145.26-M, OSHA)., • Lean / Continuous Improvement: Practical experience with Lean Manufacturing principles (5S, Value Stream Mapping, Kaizen, SMED, Line Balancing) or Six Sigma Green Belt., • CUI / Defense Compliance: Prior training or exposure to Controlled Unclassified Information (CUI) handling procedures under NIST 800-171 / DFARS. Work Environment & Physical Demands • Active, hands-on environment split between the manufacturing production floor, machine shop, energetic loading/assembly cells, and office engineering spaces., • Routine local travel between our Fairfield, NJ and Byram, NJ facilities (must possess a valid driver's license)., • Physical activity includes walking, standing for extended periods on the manufacturing floor, bending, reaching, and occasionally lifting up to 40 lbs of tooling, fixtures, or raw materials.

Job Description AHEAD builds platforms for digital business. By weaving together advances in cloud infrastructure, automation and analytics, and software delivery, we help enterprises deliver on the promise of digital transformation. At AHEAD, we prioritize creating a culture of belonging, where all perspectives and voices are represented, valued, respected, and heard. We create spaces to empower everyone to speak up, make change, and drive the culture at AHEAD. We are an equal opportunity employer, and do not discriminate based on an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. We embrace all candidates that will contribute to the diversification and enrichment of ideas and perspectives at AHEAD. Senior Pre Sales Solutions Engineer The Senior Pre Sales Solutions Engineer assists AHEAD Client Directors through formal technical presentations and technical design assistance of AHEAD’s solution and service offerings to existing and prospective clients. The Senior Pre Sales Solutions Engineer owns all technical aspects of a sales campaign and hand off to the consulting and services team; maintaining strong relationships with our clients. In this role, you are a thought leader within the Engineering organization, responsible for designing, architecting, and, at times, consulting for AHEAD clients. We expect our Senior Pre Sales Solutions Engineer to have deep knowledge across our Enterprise Cloud Framework including Cloud Management and Operations, Security, Datacenter Infrastructure and Public Cloud. Your goal as a Senior Pre Sales Solutions Engineer should be to build skills, relationships, and industry credibility across more than one of these segments to drive product and services sales. You will work in partnership with one or more Client Directors to help build a cohesive account strategy for each existing and prospective clients. As part of this strategy, you will help Client Directors identify potential technologies and vendors to partner within a given account and assist in driving this strategy throughout the sales campaign. Time management and prioritization are essential attributes of a successful Senior Pre Sales Solutions Engineer. Your goal is to evolve into the technical thought leader for each of your clients. In this capacity, you will work to define strategy, compare and contrast alternative approaches, and build key relationships, as well as size and configure products. Positioning and leveraging Subject Matter Experts (Practice Directors, Solution Principals, Specialists, Client Services, etc.) is a necessity to scale your effectiveness within accounts. You will also be expected to provide insight and details regarding work effort and client engagement to enable tracking of key KPIs throughout the year through tools that will be provided to you. Education is critical to your success at AHEAD. You are expected to continually educate not only yourself, but also our clients and your team resources. Roles and Responsibilities • Possess deep data center expertise (multiple layers of the stack)., • Present at Technical Briefings and Lab Demonstrations with clients and partners to showcase AHEAD's value., • Considered a Subject Matter Expert (SME) in one or many technologies for the team to leverage., • Recognized by the partner community to own technical sales campaigns without their support., • Qualify and position consulting engagements and services., • Provide coaching and mentoring to team resources in order to enhance their solution knowledge, technical acumen, and pre-sales skill sets., • Qualify sales opportunities in the terms of client technical requirements, decision making process and funding and decides if we should move forward with the campaign., • Understand and articulate AHEAD's Enterprise Cloud Framework., • Prioritize opportunities and efforts assigned to the geography based on maximizing total impact on team productivity and profit., • Drive engagement conversions to additional services / solutions., • Provide feedback to improve internal efficiencies., • Work with Practice Directors to provide input and suggestions for new solutions and offerings., • Present regularly at AHEAD events, user groups, conferences, and forums., • Lead Solution Verification / BOM Review process for the geography.Qualifications, • Bachelors degree in Computer Science, Engineering, or equivalent, • 4+ years Pre Sales and Data Center experience is required, • Professional communication, presentation, analytical, and problem-solving skills, • Experience working as a technical lead in a pre-sales sales campaign, • Extensive knowledge of one or more of the following data center solutions: storage, networking, compute, virtualization, data center management / automation, and security, • Ability to work under critical conditions and influence others to achieve results, • Strong interpersonal skills with excellent presentation skills, • Must be independent, self motivated, a self starter and possess a good working attitude, • Able to work well within a team and partner environment, • Customer focused and results drivenThe compensation range indicated in this posting reflects the On-Target Earnings (“OTE”) for this role, which includes a base salary and any applicable target bonus amount. This OTE range may vary based on the candidate’s relevant experience, qualifications, and geographic location. Why AHEAD: Through our daily work and internal groups like Moving Women AHEAD and RISE AHEAD, we value and benefit from diversity of people, ideas, experience, and everything in between. We fuel growth by stacking our office with top-notch technologies in a multi-million-dollar lab, by encouraging cross department training and development, sponsoring certifications and credentials for continued learning. USA Employment Benefits include: - Medical, Dental, and Vision Insurance - 401(k) - Paid company holidays - Paid time off - Paid parental and caregiver leave - Plus more! See benefits https://www.aheadbenefits.com/ for additional details. Use of AI: We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, assessing responses, or to capture recordings and create transcriptions or summaries during interviews. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please refer to the Candidate Privacy Notice or contact us at privacy@ahead.com. You may opt-out of the review or analysis of your application and resume by AI tools by using the General Application. Please include the role you wish to apply for in the Additional Information field. You may also choose to opt-out of recording and transcription at any time, including after joining an interview. Candidates will not be penalized for choosing to opt-out. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Title: Senior Software Engineer Team: Systems Location: Hybrid in Chicago (IL) or Newark (NJ) Employment Type: Full-time FLSA Classification Exempt Start Date: ASAP About Braven Braven is a national nonprofit that prepares promising college students to secure a strong first opportunity after college graduation through a career-accelerating program. We work with higher education and employer partners to offer a life-changing experience that begins with a semester-long course for college students, followed by support that lasts through graduation. Together, our ambition is to help rebuild the middle class and revitalize the American Dream. To learn more, take a look at Braven’s Jobs. About the Role In order to achieve its ambition of serving 80,000-100,000 Fellows over the next decade, Braven is hiring a Senior Software Engineer to lead the design and delivery of the platform, tools, and automation that power Braven’s programs. On the Systems team, we prioritize impact, ship the simplest thing that works, and iterate as we learn, balancing the agility to move quickly with the discipline of strong engineering practices and keeping real impact on students’ lives ahead of elegant code. As a Senior Software Engineer, you will take ownership of complex, end-to-end full-stack initiatives across our learning platform, data systems, and the AI and automation that scale our programs, raising the technical bar through architecture and code reviews and mentoring engineers as the team grows. This role is on the Systems team and reports directly to the Sr Dir, Software Engineering. What You’ll Do Design and ship complex features (60%) • Scope and lead full-stack initiatives in Python and/or Ruby on Rails across our platform, data pipelines, and program automation, from ambiguous problems to production., • Make pragmatic architecture and technical design decisions that keep our systems robust, performant, secure, and maintainable. Raise the team’s technical bar (25%) • Review code and architecture proposals, and mentor engineers to help them grow., • Champion testing, observability, and engineering best practices, and improve our processes and documentation. Collaborate and stay current (15%) • Partner across technical and non-technical teams, participate in scrum and sprints, and integrate the systems our programs rely on., • Stay informed on industry trends, security, data privacy, and emerging AI tooling, and bring them to the team., • Other duties as assigned Requirements Minimum Requirements • Bachelor’s degree in a technical field, completion of a technical training program, or equivalent practical experience, • 5+ years of software engineering experience Preferred Qualifications • Strong full-stack proficiency across backend, frontend, and database design, with experience in technologies such as Ruby on Rails, Python, React, PostgreSQL, BigQuery, and Git., • Strong mentoring and communication skills, able to manage stakeholders and bridge technical and non-technical teams., • Experience applying AI and automation to ship faster or scale operations, such as LLM-assisted development or workflow automation., • Demonstrated commitment to building strong and welcoming cultures that help to develop others., • Exemplification of Braven’s core values., • Experience that has informed your belief in Braven’s mission and has prepared you to work with or for Braven’s student Fellow population. Please know that no one ever meets 100% of the preferred qualifications. If much of this describes you, we encourage you to apply. Work Demands • Ability to work in-person in Chicago (IL) or Newark (NJ) 3 days per week, • Travel 2-3 times per year Additional Requirements • Authorized to work in the U.S., • Braven doesn’t offer employment visa sponsorship Application & Interview Process While the interview process may vary slightly, the general process will be: • Phone screen with Talent Team member, • Performance Task, • Interview with Hiring Manager, • Panel Interview with Key Partners, • Reference Checks Benefits Compensation and Benefits Braven offers competitive base salaries based on the midpoint of the market among not-for-profit organizations of similar size, with opportunities for salary growth over time. We believe in compensating staff members fairly in relation to each other, their qualifications, and their impact on behalf of the organization, and take internal and external equity seriously. Given our commitment to equity, Braven does not negotiate salary offers; instead, each salary offer is determined carefully using external and internal benchmarking. Starting salary within the range is determined by role scope and qualifications, with new hires starting at the lower end to allow for growth with performance. Braven does not base compensation on individual candidate salary expectations and is committed to maintaining internal equity. The salary ranges, by geographic market, for this role are set forth as $111,300 - $139,000 in Chicago and $122,500 - $153,100 in Newark. This is based on a 50-hour work week at an hourly rate. This is a full-time, regular, exempt, and benefits eligible position where you will be working at 100% capacity. Braven also provides competitive, comprehensive benefits, recognition, and career development. While Braven reserves the right to change benefits at any time, current benefits include: • Unlimited vacation time in addition to org-wide holidays and week-long shutdowns in July and the end of the calendar year (this is a minimum of 19 days per year), • Braven supports your path to parenthood and beyond with $25,000 in lifetime Carrot benefits for fertility, family-building, and hormonal health, • Match of your 401K contribution up to 5% of your base annual salary, starting your first full month, • Coverage of 85% of health insurance premium for employee and dependents, • 12 weeks of paid parental leave, • A one-month paid sabbatical after 4 years on staff Please note that Braven is firm in its compensation philosophy; therefore, only candidates who believe our total rewards package aligns with what they are looking for in their next opportunity are encouraged to apply. Location We gather in the office 3 days a week (Tuesday through Thursday) and work remotely 2 days a week (Monday and Friday). Therefore, this role requires teammates to live within commuting distance of one of our hubs: Chicago or Newark. We believe in the magic, connection, and collaboration that happens when people work together face-to-face, and we believe in giving people flexibility to focus, balance personal priorities, and save themselves two commutes per week. Braven is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor. We encourage talented individuals of all backgrounds to apply.

Job Description Senior Electrical Designer - MA, PA (Hybrid) Who we are! Vanderweil Engineers is a nationally recognized, top-ranked engineering firm specializing in MEP/FP and technology services. For over 75 years, we've delivered innovative solutions across diverse sectors—including Science & Technology, Mission Critical, Academic, Healthcare, and Commercial. As one of the largest independently owned engineering firms in the U.S., our team of 500+ professionals operates from nine offices nationwide, bringing deep expertise and a commitment to excellence to every project. If you are looking for an opportunity to grow your career with some of the best minds in the industry, we are looking for you. We offer growth and stability in an ever-changing volatile environment. We are looking for a Senior Electrical Designer in our Power group. Our Power Department is leading the future of the energy and utility generation industry, focused on combined heat and power, alternative fuels like biogas and hydrogen, fuel cells, and battery storage, among many other cutting-edge technologies. Responsibilities include the following: • Produce drawings and design of electrical systems for heavy industrial projects such as cogeneration power plants, central heating and cooling plants, renewable energy systems and large chillers and boilers., • Must have general understanding of medium voltage and low voltage electrical distribution systems including switchgear, switchboards, motor control centers, panelboards, generators, and transformers., • Should be capable of designing switchgear, relaying & metering diagrams, lighting, raceways, grounding systems, and lightning protection systems., • Investigation and interpreting manufactures data, set up of model views and sheets using corporate standard., • Perform design calculations including feeder and branch circuit sizing, protective device sizing and voltage drop for review by the Engineer of Record., • Coordinate routing of cable, and miscellaneous components with other trades., • Assuring tasks are complete, accurate and in accordance with good engineering practice., • Review project files for compliance with standards and procedures., • Ability to interpret one-line diagrams, AC three-line diagrams and DC elementary diagrams., • Design and layout systems, create drawings and wiring plans for installation., • Should have experience with physical design of conduits and cable trays., • Validate designs and prepare customer presentation materials., • Use the companies’ internal database to plan personnel and scheduling needs. Essential Skills & Requirements: • Associate degree or equivalent from a vocational training program or technical school., • 5 plus years’ experience desired., • Revit certification extremely required or capable of learning., • Familiarity with NEC and NESC is essential, IEEE desirable., • Experience using BIM360 Cloud Collaboration platform is a plus., • Good oral and written communication skills, • Motivated and self-sufficient, strong computer skills and detail-oriented perspectives., • Ability to work individually or in a team setting with strong interpersonal, problem solving and analytical skills., • Customer service perspective with the ability to communicate effectively with staff and clients., • Knowledge of MS Office products including Word, Excel, Outlook. Our Flexible & Hybrid Work Culture We know that work/life integration is important to our employees. Our hybrid work style allows team members to have flexibility while building their skills through in-person exposure to industry experts. We prioritize wellness with programs that support physical and behavioral health, and we’re proud to foster an equitable and inclusive workplace. Learn more about our culture at www.vanderweil.com. The total compensation that we expect to pay for this position is dependent on years of experience, licensure, education, geographic location, and project portfolio but expected to be in the $90,000.00 to $115,000.00 annually.

Job Description Millwork Engineer / CAD Designer Employment Type: Full-Time Schedule: Monday-Friday, 7:00 AM-4:00 PM Work Location: On-Site Compensation: Competitive, based on experience Position Overview We are seeking a skilled Millwork Engineer / CAD Designer to join our team and support the production of architectural woodworking and millwork projects from design through manufacturing and installation. This position is responsible for taking architectural drawings and developing detailed shop drawings for review and approval by architects, general contractors, construction managers, and customers. Approved drawings are then used by our CNC operators, bench carpenters, and installation crews to bring the project to completion. The ideal candidate will have a strong command of AutoCAD combined with hands-on knowledge of woodworking, cabinetry, carpentry, or architectural millwork. Experience with CNC programming software is highly beneficial, but we are willing to train the right candidate who has the necessary AutoCAD and woodworking foundation. We are looking for someone who can work efficiently, demonstrate a sense of urgency, communicate effectively, and take ownership of their work with minimal supervision. Key Responsibilities • Draft and review detailed AutoCAD shop drawings for architectural woodworking and millwork projects., • Interpret architectural drawings, plans, and specifications and translate them into accurate, production-ready shop drawings., • Coordinate drawings and details to ensure designs are practical for manufacturing, fabrication, and installation., • Prepare CNC machine programs using CAD/CAM software such as WoodWOP, WoodCAD|CAM, and CutRite., • Coordinate with CNC operators, bench carpenters, installers, project managers, and other team members throughout the production process., • Revise drawings based on architect, customer, GC/CM, and internal feedback., • Ensure drawings and CNC programs accurately reflect project requirements and approved designs., • Identify potential fabrication or installation issues before they reach production., • Manage assigned projects and tasks efficiently while maintaining accuracy and attention to detail., • Work independently and complete assignments without requiring constant direct supervision., • Maintain a strong sense of urgency while meeting project deadlines and production schedules.QualificationsRequired, • Strong proficiency in AutoCAD., • Working knowledge of woodworking, cabinetry, carpentry, or architectural millwork., • Ability to read and interpret architectural drawings and construction documents., • Strong attention to detail and ability to produce accurate technical drawings., • Ability to work independently and prioritize multiple tasks., • Strong communication and teamwork skills., • Positive attitude and willingness to learn., • Strong work ethic and a sense of urgency.Preferred, • Experience with WoodCAD|CAM., • Experience with Microvellum / iX., • Experience with WoodWOP or CutRite., • Previous experience programming CNC machinery for woodworking or millwork applications., • Experience producing shop drawings for architectural millwork or custom woodworking projects.Education & Experience A two-year degree is not required for this position. We are primarily interested in what you can do, not simply what is listed on your résumé. Candidates who can demonstrate strong AutoCAD skills, understand woodworking and millwork, and effectively communicate within a manufacturing and construction environment will be considered. We are willing to train the right candidate on CNC programming and our specific CAD/CAM software if they already possess a strong foundation in AutoCAD and woodworking. What We're Looking For The successful candidate will be someone who: • Takes ownership of their work., • Can perform assigned tasks with minimal supervision., • Works efficiently and with a sense of urgency., • Has a strong attention to detail., • Is comfortable working in a fast-paced production environment., • Communicates well with teammates and other project stakeholders., • Has a positive, team-oriented attitude., • Is willing to learn new software and processes., • Understands that accuracy in the engineering and drafting process directly impacts fabrication, CNC production, and field installation.Compensation & Benefits, • Competitive compensation based on experience., • Full health benefits., • Paid Time Off (PTO)., • 401(k)., • Full-time, Monday-Friday schedule., • Opportunity to develop additional expertise in CNC programming, CAD/CAM, and architectural millwork engineering. If you have a strong AutoCAD background and understand woodworking or millwork, we want to hear from you. CNC programming expertise is a plus, but we are willing to train the right person.

Job Description POSITION SUMMARY: Remington and Vernick is seeking a licensed Professional Engineer (PE) with a minimum of 8 years of experience in HVAC/mechanical, plumbing, and fire protection systems design, including fire alarm systems, to join our growing MEP team as a Project Manager/Engineer. This role involves overseeing projects from concept through construction, mentoring junior staff, and playing a key role in delivering high-quality engineering services for educational, commercial, and industrial facilities. This position will be involved in the planning, design, and documentation of mechanical systems for a variety of project types, including educational, commercial, institutional, and industrial facilities. The ideal candidate has a well-rounded mechanical background, strong technical fundamentals, and experience coordinating across disciplines. The role includes direct interaction with clients, architects, and project stakeholders and requires the ability to communicate technical concepts clearly and professionally. PRIMARY DUTIES: • Design and analysis of HVAC systems, including air distribution systems, mechanical equipment selection, and controls concepts, • Design of hydronic systems, including chilled water, hot water, condenser water, and associated piping systems, • Design and coordination of plumbing systems, including domestic water, sanitary, storm, specialty piping systems, and fixture layouts, • Working knowledge of fire protection systems and coordination with fire protection designers and disciplines, • Perform equipment and system sizing calculations, including load calculations and pipe/duct sizing, • Prepare complete construction documents, including drawings, schedules, details, specifications, and engineering calculations, • Interpret and coordinate architectural, structural, and MEP background documents Client & Project Interface Responsibilities Serve as a client‑facing engineer, participating in project meetings, design reviews, and coordination calls Communicate design intent, technical recommendations, and system options clearly to clients and project teams Respond to client comments, agency reviews, RFIs, and contractor inquiries in a professional and timely manner Collaborate with architects, owners, and internal project managers to support project goals, scope, and schedules Represent the firm professionally in external meetings and during project execution Support construction administration activities as required, including submittal and shop drawing reviews and site visits KNOWLEDGE, SKILLS, AND ABILITIES: Strong verbal and written communication skills with the ability to explain technical concepts to non‑technical audiences Demonstrate the ability to take projects from inception to completion • Detail Oriented Solid understanding of applicable codes and standards (e.g., IMC, IPC, NFPA, ASHRAE) Proficiency with design and calculation software; AutoCAD experience required (Revit experience a plus) Ability to work independently with general guidance from a Project Manager and meet project deliverables and schedules EDUCATION/EXPERIENCE • Bachelor’s degree in Mechanical Engineering or equivalent education and experience 8+ years of relevant mechanical consulting engineering experience, including HVAC and plumbing design preferred CERTIFICATIONS/LICENSES REQUIRED • Professional Engineering licensure required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job DescriptionDescription: PURPOSE: The Maintenance Engineer is responsible for assisting with the operation maintenance service and repair of equipment as assigned. He/she is also responsible for participating in the preventative maintenance program handling guest requests and other work orders as assigned. He/she is also responsible for performing the job in a safe and efficient manner and performing trade jobs such as carpentry, painting, plumbing etc. May require driving a shuttle van when needed (property specific). RESPONSIBILITIES: • Assist with the operation, maintenance and repair of equipment., • Change out light bulbs; perform preventative maintenance for guest rooms to include vinyl repair touch up paint minor furniture repair tub caulking tile repairs etc., • Perform preventative maintenance for ice machines refrigerators kitchen equipment laundry equipment HVAC guest rooms meeting rooms the swimming pool and hot tub., • Perform plumbing repair laundry equipment repair preventative maintenance on all exhaust fans and supply; monitor energy conservation; repair vacuum cleaners and any other small equipment upon request., • Immediately follow up on any alarms to determine the exact location and cause - determine emergency status and report to the Front Desk with findings., • Perform other tasks/jobs as assigned by the supervisor or manager., • Clean the exterior parking lot and remove trash from receptacles., • Perform minor landscaping tasks such as pulling weeds between lawn servicing dates., • Help the housekeeping department in maintaining public areas of the hotel., • Assist with guest transportation if property has shuttle service., • Perform preventative maintenance tasks as identified in the CORE program and record the work completed., • Maintain the needed stock of mechanical items needed to ensure work can be completed timely without delays., • Advise the General Manager of equipment or supplies needed and properly maintain the building., • Assist breakfast area in below tasks as needed:, • Approach all encounters with guests and employees in an attentive friendly courteous and service-oriented manner., • Maintain high standards of personal appearance and grooming which include wearing the proper uniform and name tag when working., • Support all areas of the food service as necessary including washing dishes by hand and/or placing them in a dishwashing machine restocking dishes glassware utensils pots and pans or other necessary equipment sweeping and mopping floors washing work tables walls refrigerators and meat blocks moving trash and garbage to designated areas if requested. Requirements: QUALIFICATIONS: • Experience in a hotel or a related field preferred., • High School diploma or equivalent required., • Must have a valid driver’s license for the applicable state (property specific)., • Must have an acceptable MVR (Motor Vehicle Driving Record) (property specific)., • Must be willing and can work a varied schedule that may include evenings nights weekends and holidays Job Settings and Physical Demands: To perform the job successfully, the candidate must be able to stand and walk 90% of their workday. Lifting and carrying up to 65 lbs. may be necessary at times and bending and stooping are required. Job is performed indoors in a well ventilated area. Disclaimer This position is a part of the Local 68 Hotel/Motel Trades bargaining agreement** This job description indicates in general the nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under the Americans with Disabilities Act) expected of people assigned to this position. It is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities required of the incumbent. All employees may be required to perform activities outside of their normal job responsibilities from time to time as needed. EOE - All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability, or veteran status.

Job Description No two days in hotel engineering are exactly the same. You may start your morning reviewing the preventive maintenance schedule and walking the property, spend part of your afternoon troubleshooting an HVAC issue or coordinating with a contractor, and later help resolve an unexpected maintenance concern before it impacts a guest’s stay. As Chief Engineer, you’re the person who helps keep the hotel running safely, efficiently, and at its best, taking ownership of the physical condition of the property, anticipating problems before they become emergencies, and working closely with hotel leadership and department teams to support an exceptional guest experience. This is a hands-on leadership role. You won’t just oversee the work, you’ll be involved in it, developing your team, solving problems, protecting the hotel’s assets, and making sure Marriott brand standards and Newport Hospitality expectations are reflected throughout the property. What You’ll Own As Chief Engineer, you’ll lead the hotel’s engineering and maintenance operations, including: • Leading, coaching, and developing the engineering team while creating a culture of accountability, teamwork, and pride in the property, • Maintaining the overall condition, functionality, safety, and appearance of the hotel, including guest rooms, public areas, back-of-house spaces, grounds, and exterior areas, • Overseeing the hotel’s major building systems, including HVAC, plumbing, electrical, mechanical, and life-safety systems, while remaining hands-on in troubleshooting and repairs when needed, • Developing and executing preventive maintenance programs and regular property inspections to identify concerns early, extend equipment life, and minimize unexpected downtime, • Responding quickly to maintenance concerns and emergencies, partnering with hotel leadership, Housekeeping, Front Office, and other departments to minimize disruption and protect the guest experience, • Ensuring compliance with Marriott brand standards and applicable safety, fire, environmental, and building requirements, including required inspections, logs, and documentation, • Managing contractors, vendors, work orders, parts, tools, and supplies to ensure repairs and projects are completed properly, efficiently, and on time, • Managing engineering expenses and supporting capital projects, balancing immediate operational needs with long-term asset protection and return on investment, • Identifying opportunities to improve energy efficiency, equipment performance, and operating costs while continuously looking for better ways to maintain and operate the hotelAbout You You’re someone who sees a problem and starts thinking about the solution. You understand that great hotel engineering is about much more than fixing what breaks—it’s about taking care of the property, preventing problems before they happen, and creating an environment where guests feel comfortable and hotel teams can do their best work. You’ll be a strong fit for this role if you: • Have 5+ years of engineering, maintenance, or facilities experience, preferably within the hospitality industry, • Have strong working knowledge of HVAC, plumbing, electrical, mechanical, and general building systems, • Are a hands-on leader who is comfortable troubleshooting problems and working alongside your team, • Have experience with preventive maintenance programs, life-safety systems, and regulatory compliance, • Can prioritize competing needs, make sound decisions, and remain calm when unexpected issues arise, • Know how to effectively manage contractors, vendors, expenses, and projects, • Can coach, develop, and hold team members accountable while creating a positive working environment, • Understand the connection between a well-maintained hotel and an exceptional guest experience, • Are comfortable working a flexible schedule and responding when urgent property needs arise Experience working within a Marriott-branded hotel and familiarity with Marriott engineering and brand standards are strongly preferred. Why Newport? At Newport Hospitality Group, hospitality starts with our people. As Chief Engineer, you’ll have the opportunity to make a visible impact every day—not only on the condition and performance of the hotel, but on the guests and team members who depend on it. We’re looking for someone who takes pride in their property, their team, and the work happening behind the scenes to create a great hotel experience. If you enjoy solving problems, developing people, and seeing the results of your work throughout the building, we’d love to hear from you. Benefits • Medical, dental, vision, and other insurance options, • Paid time off, • 401(k) retirement plan, • DailyPay access to earned wages when needed, • Special team member hotel rates for travel enthusiasts, • Opportunities for professional growth and career development Duties and responsibilities may evolve based on the needs of the hotel and business. All offers of employment are contingent upon successful completion of applicable background screening. Team members are expected to follow Newport Hospitality Group policies and standards. Newport Hospitality Group is an equal opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other characteristic protected by applicable federal, state, or local law.

Job DescriptionAbout Weee! Weee! is the largest and fastest-growing ethnic e-grocer in the United States, operating in one of the largest underserved categories in retail with affordable access to exciting ethnic food. By partnering with local suppliers, redesigning the value chain and leveraging social buying, Weee! is reshaping the grocery business entirely. You can read more about us on Business Insider, Reuters and TechCrunch. Weee! is headquartered in Fremont, CA, and is currently available coast to coast with exceptional growth (5x YoY) across geographies, categories and ethnicities. We have raised $800M+ in funding to date from leading investors including Softbank Vision Funds, DST, Blackstone, Tiger Global, Lightspeed Ventures, Goodwater Capital, XVC and iFly. The opportunity now is to join a rocketship as we prepare for the next stage of growth, and an eventual public listing. This role is onsite 5 days a week in Clifton, NJ Facility Manager About the role As a Facility Manager, you are responsible for making sure systems of the built environment, or facility, work harmoniously. You make sure the places in which people work, play, learn and live are safe, comfortable, productive and sustainable. You will contribute to the organization's bottom line through your responsibility for maintaining what are often an organization's largest and most valuable assets, such as property, buildings, equipment and other environments that house personnel, productivity, inventory and other elements of operation. Responsibilities: Safety and compliance • Uphold OSHA, EPA and site safety standards and industry codes at both sites, • Own fire and life safety: fire suppression, sprinkler and alarm testing, • Share accountability for OSHA Process Safety Management (PSM) and EPA Risk Management Program (RMP) compliance for the Clifton ammonia system, • Enforce lock-out/tag-out and safe work practices; act as a HazMat responder when needed, • Own the Safety Data Sheet (SDS) binder at both sites Maintenance and building systems • Build and run a preventative maintenance and life-cycle program for HVAC and other facility systems to cut unplanned downtime, • Lead and document daily, weekly, monthly and annual inspections, • Manage racking inspections and upkeep, plus trash and cardboard compactors, • Advise on and track energy efficiency and sustainability initiatives Powered industrial trucks (PIT) • Own PIT daily safety checks, preventative maintenance, and operator training and certification at both sites Refrigeration co-management (Clifton) • Partner with the Chief Refrigeration Engineer on the ammonia freezer and glycol cooler systems, covering compliance, PM scheduling, budget and vendor coordination Security and team leadership • Manage the security function and the facility/maintenance team at both sites, including staffing, training and performance, • Train warehouse staff and supervisors on facility SOPs, PIT certification and emergency action procedures Emergency response • Respond quickly to alarms, system failures, shutdowns and emergencies at either site, including off-hours, • Maintain plans that reduce the impact of natural disasters and other disruptions Vendors and budget • Procure bids, negotiate and review service contracts, and manage providers across both sites, • Prepare and track facility budgets, expenses and maintenance costs; report regularly and drive cost-reduction initiatives Qualifications • Bachelor's degree in Facilities Management, Facilities Engineering or related qualification such as project management, business management or construction management, or a related field, • 5+ years of work experience in a warehouse management role, • Experience leading a security function and a facility/maintenance team, • Working knowledge of OSHA safety, HazMat protocols and environmental compliance, including familiarity with OSHA PSM and EPA RMP for ammonia facilities, • Experience running PIT programs: daily safety checks, preventative maintenance, and operator training and certification, • Facility services experience across security, fire, janitorial and equipment maintenance, • Strong electrical and mechanical troubleshooting skills for general facility systems, • Experience managing facility budgets, contracts and vendors across multiple sites, • Ability to partner well with technical specialists on systems outside your direct scope, • Excellent organization, attention to detail, reporting and communication skills, • Proficiency with Microsoft Office and Google Workspace, • Ability to lift up to 50 lbs, climb ladders and work in cold/freezer environments, • Availability to respond to emergencies 24/7 when requiredNice to have, • Working knowledge of ammonia refrigeration and/or glycol cooler systems, • HazMat Responder certification, • OSHA or Food Safety certification, • Six Sigma (Green Belt) or project management certification Benefits • Comprehensive health insurance package, including medical, dental, and vision. PPO/HMO packages, • 401k, 4% company match, • Equity and Bonus, • Vacation, sick and holiday time off, • Monthly mobile stipend, • Monthly Weee! Points credits Compensation Range • The US base salary range for this full-time position is $97,000 - $114,000, • This role may be eligible to discretionary bonus, incentives and benefits, • Our salary ranges are determined by role, level, and location The range displayed on each job posting reflects the minimum and maximum base salary for new hires for the position across all US locations. Within the range, individual pay is determined by multiple factors like job-related skills, experience and work locations. Your recruiter can share more about the specific salary range during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and do not include any variable compensation elements. Weee! is an equal opportunity employer welcoming all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other basis prohibited by law. Discrimination or harassment of any kind is not tolerated at Weee!. If you need to inquire about an accommodation or need assistance with completing the application, please email us at applicantaccommodation@sayweee.com. For more jobs and to find out more about Weee!, visit our career page: https://about.sayweee.com/careers #INDWH Softbank Vision Funds California Employee Privacy Policy Intro/FAQ 3.19.2026 Weee! Privacy Policy for California Employees Applicants Contractors (March 2026)

Support in obtaining a Professional Engineer and Structural Engineer designation. Assist in overseeing steel erection activities working with the Project Manager(s), Field Engineers, General Superintendent, Superintendent, General Foreperson, and Foreperson. However, as a Project Engineer Level 1, e

\n \n \n \n \n \n \n \n Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. \n POSITION SUMMARY \n As an Applications Engineer, you will need to formulate an engineered estimate and or budget for new and existing clients that shall be provided by consultants, engineers, construction managers, and general contractors and also from in-house Sales Representatives, Key Account Representatives and or Project Managers. \n \n ORGANIZATIONAL RELATIONSHIPS \n \n • Interface with Account Mangers, Support Services, Implementation Coordinators, Project Managers and Proposal Support Department on a regular basis. \n, • Interface with Customers, Manufacturer’s Representatives, Manufacturer’s Technical staff, Distribution Suppliers and Supply Vendors on a regular basis. \n, • Interface with area and senior leadership to develop a win strategy and evaluate the dynamics of projects. \n, • Work with fellow application engineers providing guidance and or design aid in projects and products that are unfamiliar to them. \n \n \n SCOPE OF RESPONSIBILITY \n \n • Develop project requirements from interviews, customer provided scope of work, site surveys, specification, pricing sheets and drawing reviews. \n, • Develop and provide detailed equipment list, electrical requirements, installation requirements and costing for turn-key security system solutions.\n, • Configure and quote proprietary Pre Fabrication of applicable access control, CCTV and other systems \n \n ESSENTIAL FUNCTIONS \n \n • Product selection and application (to ensure the right product is used in the right application) while maintaining adherence to Securitas’s product selection process and design standards. \n, • Estimate installation costs in conjunction with Implementation Operations, Service Operations, Internal Labor and External Labor \n, • Review of Field Site Survey documents and drawings. \n, • Supports the RFI, RFP, RFQ and RFM&S process as needed \n, • Create estimates and budgets for access control, intrusion, cctv, intercom, PSIM, PLC and structured cabling systems \n, • Review architectural, electrical, telecommunication, security engineering floor plans, riser drawings, device schedules, detail drawings, interconnect and closet layout drawings. \n, • Interpret specifications, addendums, revisions, sketches and Scope of work. \n, • Work with project managers and design engineers for creating change orders on existing and ongoing projects. \n, • Manage assigned projects and maintain deadlines for each project. \n, • Build and maintain a good relationship with coworkers, suppliers and manufacturers. \n, • Create a detailed list of clarifications, exclusions & compliance on a per project basis \n, • Knowledge of construction schedules, project meetings and how they pertain and impact the project. \n, • Able to research product information utilizing the internet \n, • Excellent working knowledge of construction industry conventions \n, • Good understanding of workload and the requirements to maintain commitments. \n, • Ability to assemble all cost aspects of a project \n, • Ability to recognize strategic and competitive issues \n, • Ability to challenge labor bids from subs for various labor categories including IBEW \n, • Ability to navigate high value job environment for timelines, and compliance requirements \n, • Firm grasp of the competitive environment and strategic plays by competitors \n, • Excellent command and knowledge of building code requirements \n \n \n ADDITIONAL RESPONSIBILITIES \n \n • Be prompt, reliable, and on time in all aspects of your engagement while maintaining a high level of attention to detail and accuracy.\n, • Perform any additional duties as required or assigned \n \n \n SPECIAL KNOWLEDGE, SKILLS AND ABILITIES \n \n • Experience 5-7 Years \n, • Education BA Business/ BS Engineering/MS Engineering \n, • Applicable amount of experience in the appropriate field may be substituted for the educational background\n, • Thorough understanding of electronic security systems, their individual parts, and the onsite labor necessary to complete an installation. \n, • Ability to read and understand written specifications, drawings and controlling documents. \n, • Computer skills to include: \n, • MS Office \n, • Acrobat \n, • Visio \n, • DWG Writer \n, • Big Machines \n, • Sales Force dot com \n, • Good communications kills \n, • Ability to procure subcontractor pricing \n, • Ability to level bids from multiple subcontractors \n, • Excellent working knowledge of construction industry conventions \n, • Good understanding of workload and the requirements to maintain commitments. \n, • Ability to assemble all cost aspects of a project \n, • Ability to recognize strategic and competitive issues \n, • Ability to challenge labor bids from subs for various labor categories including IBEW \n, • Ability to navigate high value job environment for timelines, and compliance requirements \n, • Ability to assemble all cost aspects of a project \n, • Ability to recognize strategic and competitive issues \n, • Firm grasp of the competitive environment and strategic plays by competitors \n, • Excellent command and knowledge of building code requirements \n \n \n We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service. \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Job Description Hilton Garden Inn-Wayne, 15 Nevins Road, Wayne, NJ 07470 We are currently looking for Maintenance Assistant to join our Team! You will find our Hilton Garden Inn with 125 guest rooms and suites, just off Hamburg Turnpike. We are 25 miles from Manhattan so many guests come and stay for a quiet place while visiting New York City. Ice Vault Arena is a short walk away, and shopping and dining is within five-minutes. We have a bus stop a half-mile away. Our hotel has the Garden Grille and Bar, that serves breakfast and dinner to our guests. The Hilton Garden Inn is one of the 50 hotel properties owned and managed by the award-winning hotel management company, Buffalo Lodging Associates. The Maintenance Assistant will be responsible for the upkeep of the hotel property, assisting the Chief Engineer. Typical Shifts: Open availability preferred. Weekends Required. Day shifts as early as 7am to as late as 6pm. Role: • Major duties include basic repair work, painting, wall covering, plumbing, electrical work, pool operations, preventative maintenance, and indoor and outdoor grounds upkeep., • Maintains all fixtures and equipment according to the preventative maintenance schedule and records such maintenance in log books as required by BLA and hotel brand., • Maintains and services pool and spa areas including testing and recording as stated by the state and local regulations., • Cleans internal areas of buildings including sweeping, mopping and removing garbage from building. Maintains cleanliness of public and storage areas as well as the parking lot. What You Bring: At least 2 years of mechanic experience in a hotel or a related field. HVAC, electrical, plumbing, boiler operations and general maintenance skills required. Must be able to bend, kneel, lift, push, carry and pull up to 75 lbs. Requires reaching overhead, climbing, crouching, and twisting. Valid drivers license required. What We Offer You: At Buffalo Lodging, we are committed to keeping our most important assets – our employees – healthy, happy and productive. To achieve this, we offer a variety of benefits including the following: • Paid Weekly (Every Friday!), • $19/hr, • Competitive 401 (k) Retirement Savings Plan with Generous Employer Match, • Paid Vacation and Sick Time, • Paid Holidays, • Tuition Reimbursement, • Employee Assistance Program, • Hotel Discounts – for You, Your Friends and Family, • Monthly Employee Appreciation Activities & Events, • Learning and Development Opportunities, • Employee Referral Program Buffalo Lodging Associates provides equal employment opportunities to all associates and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionDescription: The Maintenance Engineer is responsible for assisting with the operation maintenance service and repair of equipment as assigned. He/she is also responsible for participating in the preventative maintenance program handling guest requests and other work orders as assigned. He/she is also responsible for performing the job in a safe and efficient manner and performing trade jobs such as carpentry painting plumbing etc. May require driving shuttle van when needed (property specific). Requirements: • Assist with the operation maintenance and repair of equipment., • Change out light bulbs; perform preventative maintenance for guest rooms to include vinyl repair touch up paint minor furniture repair tub caulking tile repairs etc. • Perform preventative maintenance for ice machines refrigerators kitchen equipment laundry equipment HVAC guestrooms meeting rooms the swimming pool and hot tub. • Perform plumbing repair laundry equipment repair preventative maintenance on all exhaust fans and supply; monitor energy conservation; repair vacuum cleaners and any other small equipment upon request. • Immediately follow up on any alarms to determine the exact location and cause - determine emergency status and report to the Front Desk with findings. • Perform other tasks/jobs as assigned by the supervisor or manager., • Clean exterior parking lot and remove trash from receptacles., • Perform minor landscaping tasks such as pulling weeds between lawn servicing dates., • Help the housekeeping department in maintain public areas of the hotel., • Assist with guest transportation if property has shuttle service., • Perform preventative maintenance tasks as identified in the CORE program and record the work completed. • Maintain the needed stock of mechanical items needed to ensure work can be completed timely without delays. • Advise the General Manager of equipment or supplies needed and properly maintain the building., • Assist breakfast area in below tasks as needed: o Approach all encounters with guests and employees in an attentive friendly courteous and service-oriented manner. o Maintain high standards of personal appearance and grooming which include wearing the proper uniform and name tag when working. o Support all areas of the food service as necessary including washing dishes by hand and/or placing them in a dishwashing machine restocking dishes glassware utensils pots and pans or QUALIFICATIONS: • Experience in a hotel or a related field preferred., • High School diploma or equivalent required., • Must have a valid driver’s license for the applicable state (property specific)., • Must have an acceptable MVR (Motor Vehicle Driving Record) (property specific)., • Must be willing and can work a varied schedule that may include evenings nights weekends and holidays Job Settings and Physical Demands: To perform the job successfully, the candidate must be able to stand and walk 90% of their workday. Lifting and carrying up to 65 lbs. may be necessary at times and bending and stooping are required. Job is performed indoors in well ventilated area. Disclaimer This job description indicates in general the nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under the Americans with Disabilities Act) expected of people assigned to this position. It is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities required of the incumbent. All employees may be required to perform activities outside of their normal job responsibilities from time to time as needed. EOE - All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability, or veteran status.

We're one of the country's largest energy companies, with a vision of powering a future where people use energy more efficiently and it's safer and delivered more reliably than ever. We're also deeply connected to the communities we serve, with more than 13,000 employees working together to support our customers and make a difference every day. Here, you'll have the stability and exciting opportunities that come with being a Fortune 500 company along with a supportive, friendly work environment where your contributions are valued. We offer a flexible work environment designed to balance employee needs with collaboration and operational excellence. Roles fall into two categories: • Onsite: Employees work onsite daily., • Hybrid: A blend of remote and onsite work, with at least three onsite days per week required. As an employee, if you are regularly scheduled to work 20 or more hours per week, you will have access to a wide range of comprehensive benefits from day one, designed to support your total well-being: medical, dental, vision, parental leave and family leave programs, behavioral health programs, 401(k) with company match, life insurance, tuition reimbursement, and generous paid time off. More than 13,000 people already call PSEG their work home, taking pride in providing safe, reliable service to millions of customers. If you're looking for a place where you can build a meaningful career and help power and support our communities, we'd love to welcome you to the team. PSEG is not offering visa sponsorship for this position. Union Local IBEWE 94 Summary As the employee becomes qualified through acquired experience and training performs the work required in the construction, operation, maintenance, and removal of transmission and distribution lines on wood poles, including work on iron poles, isolated towers and mats or vaults, which may be energized but not above 13-kV primary distribution voltage. Check general operation of assigned vehicle and associated equipment and perform other similar or less skilled work of the occupational group. Incumbent will be expected to respond to off hour work (i.e., schedule and call out / standby for regular work and storms and may be required to work shifts outside the normal workday filling in for Trouble-shooters in operations.). Metropolitan Electric Division which has a main Headquarters in Clifton and a Sub Headquarters in Irvington. Assigned work location could be Clifton or Irvington depending on workload and business need. Sign on bonus available for qualified applicants who successfully complete the pre-employment process and meet the time requirement for bonus eligibility. Hire must stay in Fully Qualified Lineperson or Troubleshooter classification for 24 Months to retain Hiring Bonus. Hiring Bonus paid out after 12 months of employment. Job Responsibilities • Perform work on de-energized lines and assists Linemen/Linewomen on energized secondary lines., • Transfer construction, change insulators, cross arms, pins, and make other similar repairs on energized 13kV pole line transmission circuits., • Construct, install, remove and maintain items such as, but not limited to: Poles, crossarms, guy wires, and line hardware., • Install, sag, remove and maintain line conductors including splicing, tapping, and the making of dead ends; install, remove and maintain messengers; install and remove aerial cables and cable laterals on poles., • Trim trees., • Make complete inspections of construction performing such work as tighten hardware, tie in conductors, and change insulators and pins., • Make voltage and load tests on energized distribution circuits or equipment., • Locate faults on 13 and 26 kV transmission and on distribution circuits, including associated equipment., • Under the supervision of an engineer or supervisor, make special tests on distribution equipment and phase-out or parallel distribution circuits and equipment., • Perform any work required on isolated towers, install, remove and maintain distribution, 13 and 26 kV conductors and accessories on tower lines., • Serve as Troubleshooter., • Replace secondary fuses on poles or on customers' installations., • Perform other similar or less skilled work of the occupational group. Job Qualifications • Must meet the Company's "General Requirements"; and in addition:, • High School Diploma or GED Required., • Need to have successfully completed a recognized apprentice program and be a first class journeyman lineperson., • Be able to perform maintenance and repair work safely and without causing interruption to service., • Have a good practical knowledge of the purpose and functioning of the overhead transmission and distribution system, and the electrical apparatus used in connection therewith; and a general knowledge of the layout of transmission and distribution circuits in the area in which he/she works., • Become familiar with the procedure and rules governing the ordering out, tagging and releasing of circuits and the Company's system of circuit designation for identification., • Acquire a good working knowledge of the Company's overhead line construction methods and practices., • Be proficient in the application of pole top resuscitation, and other approved methods of artificial respiration., • Be alert in avoiding accidents and observing hazards., • Be approved by the Joint Employee Qualification Committee after passing the written tests and physical assessments, DOT Physical Examination, and Background investigation/Drug Screening., • Be able to follow instructions and perform routine operations., • Have mechanical aptitude., • Have the physical characteristics to enable him/her to climb and work on structures and poles., • Know how to read construction prints and make simple field sketches., • Understand the application of hoists, tackle, and knots used in line construction and maintenance work and the care of tools commonly used in line construction and maintenance work., • Know how to identify and use all material, tools, and equipment commonly used on line work., • Prepare for and pass the Class 'A' CDL driving test within the first year of employment., • Provide certifications and licenses. DOT testing is required for this safety-sensitive position., • Must possess a U.S. driver's license and maintain a satisfactory driving record., • This is a safety-sensitive position. DOT testing is required., • Desired A valid Class 'A' Commercial Driving License (CDL) but a valid Class 'B' CDL candidate (21 years or older) will be considered. As an employee of PSEG, you should be aware that during emergency restoration efforts, you may be required to perform functions outside of your routine duties and on a schedule that may be different from normal operations. For all roles, PSEG's drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing. Employees who are hired or transfer into a federally regulated role (including positions covered by USDOT, PHMSA, or NRC regulations) are subject to random drug and alcohol testing, inclusive of marijuana. Although numerous states throughout the country have legalized marijuana/cannabis products recreationally and medically, the use of these products are prohibited for employees in federally regulated roles. Please note that the use of CBD products may result in a positive drug test for THC/Marijuana and such use is not a legitimate medical explanation for a positive result. If you have a disability and need assistance applying for a position, please call 973-430-3845 or email accommodations@pseg.com. If you need to request a reasonable accommodation to perform the essential functions of the job, email accommodations@pseg.com. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision. PSEG is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic. Legally protected characteristics include race, color, religion, national origin, sex, age, marital status, sexual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals. PSEG is committed to providing reasonable accommodations to individuals with disabilities.

We are looking for a talented Water/Wastewater Sr. Project Manager focused on the planning and engineering design of water/wastewater infrastructure projects who wants to be part of a purpose-driven organization that's focused on helping our clients, colleagues, and communities thrive. You will primarily be working on water/wastewater-related projects through collaboration with a wide range of technical disciplines. Our people are Stantec's most valuable resource, and in joining our team you will be able to leverage your career experiences and expertise within a culture that values inclusion, celebrates shared success, and applauds ambition. Our Water and Wastewater experience includes over 900 treatment plants, from some of the largest and most complex in the world to those supporting small, remote communities. With expertise in advanced treatment, automation/information management, nutrient recovery, odor control, operations and management evaluation, process review and optimization, and reclamation and reuse; we're always looking at what's next in the industry and bring innovative approaches to even the most complex projects. Our designs have satisfied discharge limits that push the boundaries of existing solutions, and our experts continue to conduct research in the application of developing technologies, such as treatment for removal of emerging contaminants. Does working with clients on great projects, with a talented team of professionals appeal to you? Apply now and you can join some of the best technical people in the world and work on projects you can be proud of! • Manage a team of design professionals and technicians, • Mentor and supervise staff and develop high-performing project teams, • Perform business development/application tasks and collaborates with staff to increase project wins and develop long lasting client relationships. Routine tasks include: • Participate in business line teams to manage and develop proposals, • Client facing for business development contact, meetings, walk-downs, and presentations, • Scope of work documents and estimates, • Collaboration with multiple business lines to develop opportunities, • Quality reviews, • Assist senior engineers/designers with developing and managing the project scope, budget, staffing, and schedule., • Perform complex engineering design tasks on assigned water/wastewater-related projects through collaboration with a wide range of technical disciplines., • Routine technical tasks include:, • Design basis documents, • Engineering calculations including water, heat, and material balances, • Equipment sizing and selection, • Engineering drawings such as block flow diagrams (BFDs), process flow diagrams (PFDs), and piping and instrumentation diagrams (PIDs), • Engineering reports, • Feasibility studies, • Presentations to clients, regulatory agencies and/or project stakeholders, • Assist with the management of the design and construction of projects., • Develop project management plans for projects; establishes goals and objectives for unique and complex projects., • Responsible for successfully establishing projects to achieve budget, schedule, and contractual obligations., • Conduct and/or coordinate quality assurance and quality control on assigned projects and facilitates independent technical review projects by others., • Involved in the permitting process of projects, which may require meeting with clients, contractors, interested stakeholder parties, reviewing agency personnel., • Accountable for making decisions on large projects., • Manage projects of varying complexity within multidisciplinary teams, • Research and understand issues related to regulatory and other drivers that impact individual projects, • Assist business leaders in project revenue forecasting., • Oversee proposals including development of the scope and level of effort of comparable size., • Undertake decisions and recommendations governed by general policy and project management governance., • Supervise local staff and responsible for providing mentoring and coaching for future leaders, including development of succession plans for key projects., • You inspire project teams to higher levels of achievement., • You consistently engage employees in discussions on job satisfaction and engagement and provide ongoing recognition and feedback to employees and teams., • Ability to perform mass & energy balance and process equipment sizing calculations and coordinate with other engineering disciplines including stress/structural, instrumentation & controls, and electrical., • Understanding of local and regional jurisdictional codes, legal and design requirements in relevant jurisdictions. Education and Experience: • Education: Minimum of Bachelor's degree in Engineering, • Experience: Minimum of 15 years related experience in project management, preferably for water/wastewater projects., • Licensure: Licensed Professional Engineer (PE) or ability to obtain license within 6 months., • Project Management Professional (PMP) is a plus., • Demonstrated successful experience in leadership, including defining and setting the direction for a team, project, and office; strategy development; change management; and corporate stewardship., • Travel to other offices as well as to project sites may be required. Stantec is a place where the best and brightest come to build on each other's talents, do exciting work, and make an impact on the world around us. At Stantec, we live our corporate values every day. Join us and redefine your personal best. Pay Range: Locations in MN, OH, VT, & Various CA, NY Areas-$128,600.00 - $192,900.00 Annually Locations in CO, HI, IL, MD & Various CA, NJ Areas-$141,500.00 - $212,200.00 Annually Locations in WA, DC & Various CA, MA areas-$151,700.00 - $227,600.00 Annually Locations in NYC & CA (Bay Area) & NJ (RP)-$162,000.00 - $243,100.00 Annually Pay Transparency: In compliance with pay transparency laws, pay ranges are provided for positions in locations where required. Please note, the final agreed upon compensation is based on individual education, qualifications, experience, and work location. At Stantec certain roles are bonus eligible. Actual compensation for part-time roles will be pro-rated based on the agreed number of working hours per week. Benefits Summary: Regular full-time and part-time employees (working at least 20 hours per week) have access to medical, dental, and vision plans, a wellness program, health saving accounts, flexible spending accounts, 401(k) plan, employee stock purchase program, life and accidental death & dismemberment (AD&D) insurance, short-term/long-term disability plans, emergency travel benefits, tuition reimbursement, professional membership fee coverage and paid family leave. Regular full-time and part-time employees will receive ten paid holidays in each calendar year. In addition, employees will be eligible to accrue vacation between 10 and 20 days per year and eligible for paid sick leave (and if more generous, in accordance with state and local law). Temporary/casual employees have access to 401(k) plans, employee stock purchase program, and paid leave, in accordance with state and local law. The benefits information listed above may not apply to union positions because benefits for such positions are governed by applicable collective bargaining agreements Primary Location: United States | DC | Washington Other Locations: United States | NJ | Rochelle Park Organization: BC-1951 Water-US Northeast Employee Status: Regular Management Level: Individual contributor Business Justification: New Position Travel: Yes Schedule: Full time #additional Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, color, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. At Stantec we are committed to ensuring our recruitment process is accessible to all. If you require reasonable adjustments to be made during the recruitment process then please inform a member of our Talent Acquisition team.

Join Rheem Northeast Distribution, proudly part of Rheem, a global leader in Heating, Ventilation and Air Conditioning (HVAC) innovation! With over 100 years of trusted service, Rheem Northeast Distribution has built a strong network across New Jersey, Connecticut and the New York City and Philadelphia metropolitan areas, delivering top-quality HVAC products, exceptional service, and industry-leading training to residential contractors and the multifamily industry. At Rheem Northeast Distribution, we continue to operate with a small-company feel but with the resources and benefits of a large company - creating opportunities for growth and success for both our team and our customers. As part of the Rheem family, we're stronger than ever and committed to: • Listening to Understand, • Contributing Respectfully, • Thinking Creatively, • Acting with Responsibility Step into an environment where innovation meets opportunity, and where you can grow with a company that values both its employees and its customers! We are seeking a dedicated and dynamic Branch Manager to join our team and lead the operations, customer service, and team development at one of our distribution branch locations. Your success in this role will depend on your ability to blend operational excellence, exceptional customer service, and strong people leadership to drive growth and profitability while fostering a positive workplace culture. This position serves our Rheem Northeast Distribution and is located in Clifton, NJ. • Oversee all branch operations, including customer transactions, warehouse management, inventory, delivery, and financial transactions., • Ensure the branch operates to the highest standards and meets key performance metrics., • Provide input on the annual budget and manage monthly profit and loss (P&L) performance., • Identify and implement process improvements to enhance operational efficiency., • Collaborate with leadership, sales, and other cross-functional teams to support current and potential customers and the overall business., • Promote and enforce a safe, compliant, and hazard-free work environment by leading safety practices, upholding company guidelines, and ensuring all employees are trained and supported in maintaining a strong safety culture., • Guarantee top-tier customer service in every transaction, building and maintaining positive relationships with customers., • Address and resolve customer concerns in a timely, professional manner., • Foster a positive and safe workplace culture aligned with our core values., • Set clear expectations for employees and provide ongoing coaching, development, and feedback., • Promote and enable training and professional growth opportunities for team members., • Celebrate achievements while addressing and resolving performance concerns., • Participate in workforce planning, recruitment, and the onboarding process for new hires., • Bachelor's Degree in a related field or equivalent work experience., • 7+ years of experience in a distribution or warehouse environment, with a focus on strong customer service acumen, • Experience managing and developing a team, • Knowledge of business principles, including strategic planning, resource allocation, and team leadership., • Proficiency in Microsoft Office Suite and experience working with operational systems., • Strong organizational and time management skills., • Excellent verbal and written communication skills., • Proven ability to analyze data and implement actionable insights., • Ability to thrive in a fast-paced environment, • Demonstrated experience fostering a culture of safety and continuous improvement., • Ability to lift up to 50 pounds. Preferred Qualifications: • Familiarity with the HVAC distribution industry, including HVAC products and services., • Experience with material handling equipment (MHE) and delivery vehicles. As a leader at Rheem, how you achieve results is as important as the results you achieve. While LEADING OTHERS, you will be expected to demonstrate the following competencies and behaviors: • Aligning Performance for Success, • Applying Business Knowledge, • Building Talent, • Building Trusting Relationships, • Communicating with Impact, • Customer-Orientation, • Delegating Tasks, • Executing/Leading the Team, • Facilitating Change, • Fostering Relationships/Emotional Intelligence, • Influencing, • Problem Solving & Decision Making, • Supporting Innovation Equivalent combination of education, experience, and skills may supplement above minimum job requirements. The pay scale for this position $84,400 - $154,764. Please note all pay ranges are broadly stated and any final offer is dependent on factors such as location, direct experience, market guidance and internal equity, among other qualifying criteria. At Rheem, we engineer products for life. For home life. For work life. For the life of the planet we all share. Backed by over 100 years of expertise, we're passionate about product innovation and boldly committed to sustainability. Our full line of global air and water solutions deliver reliable performance, comfort and energy savings for residential and commercial applications worldwide. From engineers to accountants, sales professionals to support experts, Rheem depends on people to power our innovations. Join Rheem and help shape the future of products that impact livesevery day. Our Behavior Based Values set us apart: • Listening to Understand Open mind, learning from others, accepting feedback, embracing the objective, • Contributing Respectfully - Sharing opinions, valuing ideas, sharing opposing perspectives with respect, • Thinking Creatively Applying creativity, seeking improvements, understanding from the customers' lens, • Acting with Responsibility Owning decisions and actions, acting with integrity, embracing accountability Rheem is an Equal Opportunity Employer. Rheem encourages all qualified candidates to apply, including those of any race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. The job description above has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Equivalent combination of education, experience, and skills may supplement above minimum job requirements. For U.S. Based jobs, please note that Rheem is unable to hire candidates to be employed in the following states: Alaska, District of Columbia, Hawaii, Idaho, Mississippi, Montana, New Mexico, North Dakota, or Vermont. Rheem and its subsidiaries do not accept unsolicited resumes from recruiters or employment agencies. In the absence of an executed Recruitment Services Agreement, there will be no obligation to any referral compensation or recruiter fee. • Job Identification 4407, • Job Category RAD - Wholesale Distribution, • Posting Date 09/17/2026, 05:04 PM, • Degree Level High School Graduate/GED, • Job Schedule Full time, • Travel No, • Worker Category Onsite, • MapTiler OpenStreetMap contributors Legend Jobs at a location Group of locations MapTiler OpenStreetMap contributors | Oracle Corporation Terms Legal Notices Use control and scroll to zoom the map Use two fingers to move the map Clifton, NJ, United States

Biomedical Engineering, Biotech, Electrical Engineering, or Electronics related fields or equivalent experience. General Accountability:The Field Service Engineer provides onsite support primarily in the U. Field Service EngineerOur mission is to profoundly change the standard of care by creating a

Engineer / Maintenance TechnicianLocation: Hilton Garden Inn – Ridgefield Park, NJReports To: General Manager / Chief EngineerPosition OverviewThe Engineer / Maintenance Technician is responsible for the day-to-day maintenance and repair of hotel facilities, equipment, and systems to ensure a safe

Job DescriptionDescription: Personality Profile Advanced Facilities Solutions is seeking a dynamic and detail-oriented Senior Project Manager to lead our team in the execution of projects, specifically in the construction realm, ensuring timely and accurate completion. Job Summary As the Senior Project Manager, you will play a pivotal role in coordinating, directing, and supervising project activities while maintaining alignment with AFS’s strategic vision, directly managing a team of skilled professionals entrusted with a workload of 50-200 projects. Job Responsibilities • Manage site improvements, excavation, footings, foundations, grading, landscaping, underground utilities, • Supervise all Trade Contractors: Carpentry, Flooring, Drywall, Millwork, Paint, MEP’s, Site Civil, Concrete, Masonry, Steel, • Supervise in-house employees: Carpenters, Laborers, Painters, etc., • Hire & Supervise General Contractors, • Manage construction team including Administrator, Project Coordinator, Project Engineer, Site Supervisor, • Work with Owner / Developers, • Walk with Town inspectors, • Coordinate public utility installations & account set-up including permit submittals and documentation, • Run job meetings with Client, Architects, Engineers, and Township, • Estimate, Schedule and Liaison with architects, engineers, vendors, suppliers, Township, Utility Companies, • Manage remediation of projects and structures, • Contracts, AIA, change orders, close-out documents, • Purchase materials and monitor deliveries, • QC/QA, • Create Punch listings for project completion, • Project size from $50,000 to $1,000,000 or higherRequirements: Education and Experience • 5+ years of experience in construction field, • Pre-construction and design build experience, • Budgeting, • Scope writing Knowledge, Skills and Abilities • Blueprint plan review and Material Takeoffs, • OSHA training, • Health & Safety plans, • Good leadership and people skills, • Excellent communication skills- verbal and written, • Microsoft Office suite, Adobe Editor experience Job Type: Full-time Pay: From $95,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Schedule: • 8 hour shift, • Day shift Ability to Relocate: • Saddle Brook, NJ 07663: Relocate before starting work (Required) Work Location: In person

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology — video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you’re an installation technician, service technician, engineer, or project manager, you’ll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal—build a meaningful career while protecting what matters most through innovative security technology. Job Description Allied Universal Technology Services is looking to hire a Senior Project Manager. The Senior Project Manager plans, organizes, directs, and controls project-planning and performance activities for effective management of electronic security installation projects to include, but not limited to, all aspects of systems scheduling, field installation, commissioning, and financial success. This role is responsible for overall project budget management, project surveys, material procurement, project implementation, and inspection scheduling. The Senior Project Manager must be capable of executing the project on time and within budget through effective communication, preparation, and management of multiple projects varying in size and complexity. RESPONSIBILITIES: • Maintain an active and thoughtful communication pattern with vendors and internal and external customers while balancing time versus profits to make sure efforts reflect and anticipate return (revenue, growth, and customer retention), • Consistently and effectively determine, allocate, and maximize available resources through project planning to ensure the achievement of sales and project management objectives, • Establish and maintain an in-depth knowledge of the industry and competitive practices as they relate to multiple markets., • Implement changes in project, contract price, and installation plans to include the estimation, development, and submission of Change Orders, • Support company's invoicing and collection efforts by not only ensuring all contractual terms and conditions are met initially, but by ensuring all invoicing is completed accurately and on time by aggressively monitoring the reports in ERP System and following up with customers management and customers on a consistent basis, • Manage Project budget and project P&L responsibility, • Prepare the project installation plan, manages the plans, and prepares and implements job procedures, • Maintain construction schedules and coordinate task-scheduling with other trades, • Maintain all records of job status, job changes and material flow, • Define project problems by working with financial, contract management and management tools to assure project profitability, • Plan and schedules engineering, installation, and subcontracting activities on large and/or complex systems, • Supervise installation labor and sub-contractors, • Prioritize team workload to ensure quality results are delivered on time and within budget, • Troubleshoot project issues and engage appropriate management and resources as needed, • Develop fallback and contingency plans QUALIFICATIONS: • Must possess a high school diploma or equivalent, • Factory certifications in relevant technology platforms is a plus (Software House, Lenel, Brivo, Open Options, Exacq, American Dynamics, Milestone, OnSSI, etc.)., • Must possess one or more of the following:, • A minimum of three (3) years of experience in the electronic security industry, • A minimum of two (2) years of related low-voltage field, • Proficient with MS Office Suite (Word, Excel, Outlook, PowerPoint, Project, and SharePoint), • Ability to work independently and perform tasks of moderate to high complexity, which requires knowledge of technical and business environments, • Ability to establish and maintain effective working relationships with both internal and external customers., • Superb verbal and written communication skills, • Team Player with strong work ethic, • Excellent follow-up and leadership skills, • Strong analytical decision-making capabilities, • Self-motivated with the ability to motivate and influence others, • Must be able to manage multiple tasks while meeting strict deadlines, • Ability to conduct site walks and attend onsite customer meeting PREFERRED QUALIFICATIONS: • Solid knowledge of PM techniques and tools, general knowledge of contract laws and regulations, • Associate’s Degree in Business, Technology, or related field, • PMP from the Project Management Institute, • Six (6) years of project management experience, electronic security industry experience, • Five (5) years of experience in the electronic security industry, • Experience in the security industry BENEFITS: • Salary range: $125,000 - $145,000 annual + 20% annual bonus potential + company vehicle and gas card, • Medical, dental, vision, retirement plan, basic life, AD&D, and disability insurance, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time is offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-26 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices. Requisition ID 2026-1673181

Job DescriptionDescription: KSE is a mid-size construction management and engineering firm ranking in the ENR Top 100 for CM and ENR Top 500 for design services. With seven offices across four states (NY, NJ, PA and CT), the firm has been providing transportation and public infrastructure construction services for more than three and half decades. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KSE is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Resident Engineer Reports to: Project Manager Job Summary: The Resident Engineer will manage projects for the Project/Construction Management group. In this role, will lead Resident Engineering Inspection teams on Capital Infrastructure projects in transportation (Highways and Bridges) construction projects. Collaborate with client and business development teams with the goal of supporting Construction Management pursuits and proposals. Technical Responsibilities: • Responsible for the supervision of the construction inspection of various types of construction projects and enforcing safety and quality requirements.., • Serves as the Owner's direct on-site representative to the contractor., • Duties include direct supervision of a project's construction engineering/inspection staff, performing quality assurance and oversight of the work in progress and ensuring that the project is constructed in general conformance with the contract plans and specifications., • Responsible for performing constructability reviews of design documents; analyzing all technical aspects of construction, reviewing and recommending major construction changes, and supervising construction inspection activities for all phases of the project lifecycle., • Participates in project meetings and planning sessions., • Review and process RFI’s, submittals, change orders, as-built quantities, and contractor’s payments, • Possesses strong supervisory and technical skills; effective time-management skills; strong computer skills; strong mathematical skills including algebra, geometry, and trigonometry; excellent verbal, written, and interpersonal communication skills; able to mentor staff in functional areas of technical construction inspection activities., • Assigns, instructs, and directs project staff in their work of inspection of the materials and work procedures involved., • Possesses an understanding of the equipment, materials and methods utilized by contractors and confirms that these methods conform to the applicable contract plans and specifications., • Perform construction inspection and administrative services for cost control, progress control and quality control., • Prepares and maintains all required reports and verifies that the assigned project has been fully documented., • Receives and investigates complaints and inquiries from property owners, citizens, and public officials., • Represents the owner in dealings with the contractor and public agencies on the local, county, and state levels., • Directs the activities of sub-consultants and other KSE Departments., • Is proficient in software required to complete assigned projects., • Responsive to Client and other KSE Managers/needs. Administrative Responsibilities: • Identifies out-of-scope work., • Monitors invoice ability of self and assigned staff to verify compliance with established goals., • Familiar with all company policies and procedures and verifies implementation and compliance., • Completes time sheet on a daily basis., • Verifies that assigned staff have been provided with correct time charge information., • Develops and/or assists in developing training program for staff. Requirements: Education and Experience: • Bachelors of science degree, preferably in Engineering, Architectural, or Construction Management, • Ten (10) years of roadway / bridge experience, at least half of which has been at the Resident Engineer level Professional Licenses/Registrations: • Licensed Professional Engineer (PE) in the State of New Jersey, or, • NICET Level IV certification from the National Institute for Certification in Engineering Technologies., • OSHA 30 preferred Physical Requirement: • Fit for highway construction inspection., • Possible night shift and weekend work on an emergency basis., • Ability to work in diverse weather conditions, • Extended periods of standing and walking, possibly on uneven or challenging terrains, • Climbing, bending, kneeling, • Conduct site visits and inspections to monitor construction activities and ensure they adhere to safety protocols and engineering requirements, • Lift up to and carry up to 25 lbs. General Qualities: • Capable of leading, training, inspiring, and motivating the staff., • Provides technical and management support to the Department Manager/Regional Manager/Project Manager., • Has full technical and administrative responsibility for interpreting, organizing, executing, and coordinating projects/assignments., • Manages a major complex project and/or several routines/fewer complex projects. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description • Please note that this position does not provide visa sponsorship., • Principals only; we are not accepting agency resumes for this role. The primary focus and responsibilities for this role include but are not limited to: • Provide Construction Management/Superintendent services throughout the course of construction, • Coordinate with contractors, vendors, and consultants throughout the project lifecycle, • Communicate effectively with internal teams, clients, and service providers, • Assist in the development of cost estimates and pre-construction Planning, • Assemble work scope for required subcontractors, • Support in bidding processes, subcontractor outreach, and proposal preparation, • Review plans and other technical documents, • Answer questions regarding the scope and/or timing of the project, • Monitor costs and project progress o Maintain Project Buy-Out Summary • Maintain control of all project documentation o Dropbox o Procore Construction Management Software • Create, manage, and track RFI’s from the field to the architect/engineer of record, • Maintain/update project records, including schedules, • Lead project team with conflict resolution between owner, contractors, and subcontractors, • Turn in and track submittals from subcontractors to A/E for approval, • Understand appropriate building codes/ regulations, • Coordinate project change-order management, creation, and negotiation, • Conduct and document weekly project owner’s meetings/decisions, • Assist the project team with site safety documentation and coordination, • Assist the project team with closeout of the project, • Assist the accountant with monthly subcontractor billings and pay applications In addition to field responsibilities, this position must represent the general contractor in a professional manner when dealing with site personnel and the project owner. Requirements: • 5-50 years in (commercial Tenant Improvement types) of construction (work in residential or civil/mega scale is not applicable to this role), • 5+ years as a site Superintendent, Site Project Manager, or on-site Owner's Representative with prior construction management experience, • Greenfield (or whitewall) to turnkey experience, • People and Project Management skills, • Strong computer skills, • Exceptional experience meeting budget and schedules, • The ability to anticipate and deal with unexpected blockages with grace and dignity The anticipated schedule for this project is 6-9 months This position is budgeted at a weekly rate of $2,000 (if you are close to this number, please apply and we can discuss how your specific experience affects the final compensation number) Additional details and information may be discussed upon further applicant evaluation • Please note that this position does not provide visa sponsorship, • Principals only, we are not accepting agency resumes for this role At SFV Services, we don't just build structures – we build an inclusive workplace where everyone can thrive! We're proud to be an Equal Opportunity Employer, celebrating the unique talents and perspectives each team member brings to the table. Whether you're designing, constructing, or managing facilities, your individual awesomeness is what matters here, not your race, color, religion, gender, age, or any other label society might slap on you. We're on a mission to create amazing spaces, and we believe that starts with creating an amazing, diverse team. So come as you are, bring your whole self to work, and let's build something extraordinary together. • Please note that this position does not provide visa sponsorship, • Principals only, we are not accepting agency resumes for this role At SFV Services, we don't just build structures – we build an inclusive workplace where everyone can thrive! We're proud to be an Equal Opportunity Employer, celebrating the unique talents and perspectives each team member brings to the table. Whether you're designing, constructing, or managing facilities, your individual awesomeness is what matters here, not your race, color, religion, gender, age, or any other label society might slap on you. We're on a mission to create amazing spaces, and we believe that starts with creating an amazing, diverse team. So come as you are, bring your whole self to work, and let's build something extraordinary together. Powered by JazzHR iphjaV1pdz

Aerotek - - Responsibilities: Perform hands-on preparation, maintenance, and refurbishment of scaffolding and sidewalk canopy components; Sand, paint, clean, and repair materials; Assemble and disassemble scaffold and canopy systems; Load, unload, organize, and stage materials for shipment; Maintai

Airport Terminal Services - - Responsibilities: lift up to 70lbs per mail handling unit; sort, scan, load/unload USPS mail containers and Airline cans; follow all Safety rules and Regulations; work assigned schedules including weekends and holidays.

Aerotek - - Responsibilities: Handle paint and raw materials in production; Lift and pour 60-pound barrels of paint; Safely work with chemical products; Follow GMP and SOP procedures; Maintain a clean and organized work area.

GreyStar - The Harper at Harmon Meadow [Facilities Maintenance] As a Maintenance Technician at GreyStar, you'll: Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property; Diagnose the source or cause of the defect or problem, and

GreyStar - Hudson River Waterfront Walkway - Responsibilities: Process and complete maintenance work orders from resident requests and preventative maintenance; Complete the make-ready process to prepare vacant units for leasing (pre-move-in inspections, punch lists, scheduling vendors); Track inven

This job description is intended to provide a general overview of the responsibilities.

Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment.

This job description is intended to provide a general overview of the responsibilities.

Responsibilities include general maintenance, support for camp operations, and responding to maintenance needs.

This job description is intended to provide a general overview of the responsibilities.

Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment.

This job description is intended to provide a general overview of the responsibilities.

Wellstar Health System - - Responsibilities: Paint interior surfaces in hospital facilities; Lead painting projects with safety compliance; Train Maintenance Technicians; Coordinate repairs with minimal patient impact; Maintain tools and paperwork.

This job description is intended to provide a general overview of the responsibilities.

HHM Hotels - - Responsibilities: Perform preventative maintenance and repairs on hotel facilities; Replace ceiling tiles, sheetrock, and wallpaper; install/repair sheetrock; Paint designated areas and items; replace basic electrical fixtures; Perform minor plumbing tasks; follow MSDS and OSHA stand