Trabajos hard labor en San Diego, CaliforniaCrear alertas

Job Description Electrical Maintenance Technician – El Cajon, CA Job Description • Perform electrical repairs and preventive maintenance on production equipment, machinery, and facility systems, with a primary focus on electrical work., • Support the installation and setup of new production equipment, including electrical power, controls, and integration into existing systems., • Observe equipment in operation to identify, prevent, and diagnose potential problems before they lead to downtime., • Dismantle machinery and equipment to access, remove, repair, and replace defective or worn parts., • Install, repair, or rebuild equipment and replace ordinary parts as necessary to maintain optimal performance., • Keep machinery, equipment, and facility systems in good repair through both reactive troubleshooting and scheduled preventive maintenance., • Perform electrical, pneumatic, mechanical, and hydraulic system repairs on both facility and production equipment, including HVAC and refrigeration systems., • Read and interpret general construction and technical drawings, including plumbing, hydraulics, electrical, and pneumatic schematics., • Maintain and service plumbing, gas, compressed air, drains, and wastewater systems throughout the facility., • Perform facility plumbing work such as working with PVC water lines, removing, replacing, and unclogging toilets, and replacing light ballasts., • Install, maintain, and repair air lines made of PVC or copper, as well as associated industrial electrical equipment., • Troubleshoot and repair AC and DC motor controls and related electrical components operating up to 480 volts., • Perform PLC troubleshooting and electrical maintenance on industrial equipment and controls., • Work with AC voltage in the range of approximately 180V to 480V, ensuring safe and compliant electrical practices., • Install, troubleshoot, and service transformers, including adjusting voltages and performing electrical diagnostics., • Perform panel preventive maintenance, including checking for loose fuses, identifying hot spots using a thermal (FLIR) gun, and ensuring overall panel integrity., • Check voltages on machines, verify continuity, and perform detailed electrical testing to support accurate troubleshooting., • Use control logic and ladder logic to read Fanuc control diagrams and logic, diagnosing and repairing issues on equipment where most systems run on Fanuc controls., • Resolve power supply issues on AC and DC motors, including checking for blown fuses, wiring problems, and control faults., • Troubleshoot and repair breakers and heavy industrial equipment to restore safe and reliable operation., • Perform reactive maintenance to resolve urgent breakdowns, then follow up with preventive maintenance tasks and facility repairs to reduce future issues., • Strong electrical repair and installation skills for industrial machinery and facility systems., • Hands-on experience working with 440V and 480V three-phase power systems., • Proficiency in troubleshooting and repairing hydraulic, pneumatic, and electronic systems., • Ability to read, interpret, and work from electrical, hydraulic, pneumatic, and general construction drawings., • Experience with industrial electrical panels, including panel preventive maintenance and troubleshooting., • Control logic and ladder logic troubleshooting skills, particularly with Fanuc controls., • Ability to diagnose and repair AC and DC motor controls and related power supply issues., • Experience working with transformers, including voltage adjustment, installation, and troubleshooting., • Competence in performing mechanical repairs on production machinery and facility equipment., • Ability to perform plumbing maintenance, including working with PVC lines, toilets, and drains., • Experience maintaining and repairing compressed air systems, including PVC and copper airlines., • Proficiency in using electrical test equipment for checking voltage, continuity, and identifying hot spots., • Experience maintaining and repairing HVAC and refrigeration systems in an industrial environment., • Proficiency in maintaining NC and CNC equipment such as press brakes, CNC brake presses, seam welders, shears, CNC turret punch presses, punch presses, spot welders, power rolls, power rollers, hydro presses, resistance seam welders, and expanders., • Familiarity with industrial analog and digital control systems and general analog mechanics., • Comfort working with industrial electrical equipment and heavy machinery in a production environment., • Ability to manage a varied workload that includes production equipment maintenance as well as facility maintenance tasks. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Cleanroom Technician - 2nd Shift - Sorrento Valley Job Description Join our dynamic team as a Cleanroom Technician, where you will assemble panels for medical devices and laser process components, following detailed instructions in various forms. Your role will include inspecting parts for quality, performing micro laser ablation and etching, and ensuring accurate data entry. Responsibilities • Assemble panels for medical devices and laser process components based on drawings, written, or verbal instructions., • Inspect parts for quality and defects., • Perform micro laser ablation and measurement of arterial stents., • Conduct micro laser etching of dental implant parts., • Enter data, fill out job travelers, and complete certificates of conformance., • Sign off on travelers and create labels for parts., • Ability to assemble medical devices in a production and cleanroom environment., • Experience with machine operation and a strong work ethic., • Ability to act independently in a manufacturing role., • 2 years of experience in manufacturing, preferably in medical devices., • Experience in a startup and R&D environment is preferred., • Proficiency with calipers and micrometers, and experience in measuring parts. Become part of a small, innovative medical device location that is part of a larger company. Gain exposure to both volume manufacturing and R&D work, and benefit from the opportunity to work on diverse projects in a supportive environment. Work Environment Work the 2nd shift from 2:30 PM to 10:30 PM, with training on the first shift. Enjoy an 8-hour workday with paid overtime opportunities on Saturdays. Join a project-based manufacturing team in a cleanroom environment, where adaptability and priority shifting are key. You will be sitting most of the day with the option to stand, and must be comfortable lifting up to 20 lbs. Job Type & Location This is a Contract to Hire position based out of San Diego, CA. Pay and Benefits The pay range for this position is $24.61 - $24.61/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Quality Inspector - Santee, CA - 1ST Shift - up to $28/hr Job Description Join a leading provider of patented pumping solutions as a Quality Inspector. In this role, you will be responsible for inspecting a wide variety of parts, assemblies, tooling fixtures, and materials to ensure compliance with company specifications, customer requirements, and applicable quality standards. This position requires technical judgment, attention to detail, and the ability to resolve moderately complex inspection issues. You will work under limited supervision and will not have supervisory responsibilities. Responsibilities • Perform visual and dimensional inspections of machined parts, castings, assemblies, purchased components, and materials at various stages of the manufacturing process., • Conduct inspections in accordance with standards such as MSS SP-55, API, ASTM, ANSI/HI, and ISO., • Determine appropriate inspection methods and select necessary gauges, fixtures, indicators, and measurement equipment to verify specifications and critical dimensions., • Read, interpret, and inspect parts based on engineering drawings, specifications, and work instructions., • Prepare and complete inspection reports, including First Article Inspection (FAI), in-process inspections, final inspections, certified inspections, RMAs, and final inspection of pump orders prior to shipment., • Document and process Non-Conforming Material Reports (NCMRs) for parts that do not meet specifications., • Inspect incoming purchased materials and components, reviewing supplier documentation and disposition., • Collaborate closely with Receiving, Production, Engineering, and Quality teams to determine the appropriate disposition of materials and parts., • Perform inspections based on work orders and accurately record inspection start and completion times in the manufacturing system (Global Shop)., • Assist with internal audits and follow up on corrective and preventive actions as assigned by the Quality Manager or Supervisor., • Maintain accurate, complete, and confidential quality records and documentation., • Follow all safety rules, procedures, and established operating practices., • 2–5 years of relevant quality inspection experience in a manufacturing environment., • Strong ability to read and interpret engineering drawings and specifications., • Experience using precision measuring instruments such as calipers, micrometers, height gauges, and indicators., • Good verbal and written communication skills, with the ability to interact effectively with employees at all organizational levels., • Proficiency with Microsoft Office applications., • Quality control, • Inspection, • Quality inspection, • Quality assurance, • Blueprint Become part of a global leader in innovative pumping solutions, where you will have the opportunity to work with cutting-edge technology. Enjoy a collaborative work environment that values quality and precision, and where your contributions are recognized and valued. Benefit from a culture that supports professional growth and career advancement. Work Environment The work environment involves a manufacturing setting where you will interact closely with various teams including Receiving, Production, Engineering, and Quality. You will use advanced measuring instruments and technology, and work with engineering drawings and specifications. The role requires adherence to safety rules and established operating practices. Job Type & Location This is a Contract to Hire position based out of Santee, CA. Pay and Benefits The pay range for this position is $25.00 - $29.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionNow Hiring: Quality Control Inspector Be a key part of ensuring precision, quality, and reliability in manufactured products! Schedule & Pay 1st Shift Monday - Friday $25-$29/hr What You’ll Do • Perform visual and dimensional inspections on machined parts, castings, assemblies, purchased components, and raw materials at multiple stages of production, • Conduct inspections in accordance with industry and quality standards, including MSS SP‑55, API, ASTM, ANSI/HI, and ISO, • Select and use the appropriate inspection methods, gauges, fixtures, indicators, and precision measuring equipment to verify critical dimensions and specifications, • Read and interpret engineering drawings, specifications, and work instructions to ensure compliance, • Prepare and complete inspection documentation, including First Article Inspection (FAI), in‑process, final, certified inspections, RMAs, and final pump inspections prior to shipment, • Identify non‑conforming materials and create Non‑Conforming Material Reports (NCMRs) to support corrective action, • Inspect incoming materials and components, including review of supplier documentation and certifications, • Collaborate with Receiving, Production, Engineering, and Quality teams to determine proper disposition and resolution, • Accurately record inspection activity and timing in the manufacturing system (Global Shop), • Support internal audits and follow up on corrective and preventive actions as directed, • Maintain accurate, organized, and confidential quality records, • Follow all safety procedures and established operating practices, • Assist with additional quality or inspection tasks as needed What We’re Looking For • 2–5 years of quality inspection experience in a manufacturing environment, • Strong ability to read and interpret engineering drawings and specifications, • Hands‑on experience with precision measuring tools (calipers, micrometers, height gauges, indicators, etc.), • Clear verbal and written communication skills with the ability to work cross‑functionally, • Working knowledge of Microsoft Office, • Excellent attention to detail, organization, and analytical skills This is a Contract to Hire position based out of Santee, CA. Pay and Benefits The pay range for this position is $25.00 - $29.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description About the Job: As an Assistant General Manager, you'll be at the heart of our restaurant's success, supporting the Restaurant General Manager by upholding brand standards and inspiring your team. You'll lead by example—training, coaching, and recognizing your team to deliver unforgettable customer experiences. When your team shines, so do you! In this dynamic role, you'll take charge of daily operations in the Restaurant General Manager's absence, making key decisions and driving the team toward excellence. We believe in having fun while embracing personal challenges and growth opportunities. You'll work a 45-hour week, with 40 hours at regular pay and 5 hours at time-and-a-half, providing a balanced and rewarding work experience. The Day-to-Day: • Ensure consistent customer satisfaction by effectively modeling the MIC Success Routine and prioritizing customer needs., • Oversee team members' adherence to Shift Excellence responsibilities, maintain high food safety standards, and uphold core operational excellence. Take charge of restaurant operations in the GM's absence., • Collaborate with the GM to assess team performance, providing ongoing, constructive, and positive feedback. Address employee relations issues as they arise, resolving them directly or escalating to the GM when necessary., • Assist in sourcing, recruiting, interviewing, and hiring team members while fostering a culture of equity, inclusion, and belonging., • Act like an owner by supporting Profit & Loss management, including cash control, security procedures, inventory maintenance, and labor management., • Review financial reports and take appropriate actions to optimize performance., • Support the GM in facility maintenance and ensure health and safety standards are consistently met. Is This You? • 3+ years of restaurant or retail management experience., • Experience assisting with P&L management, including cash control, security procedures, inventory maintenance, labor management, and financial reporting., • Ability to ensure all employees receive proper training and resources., • A champion of Taco Bell’s culture and values, promoting equity, inclusion, and belonging in the restaurant., • Skilled in leading efforts for individual and team recognition, collaboration, and motivation., • Talent for identifying and recruiting exceptional team members, supporting the GM in the hiring process., • Strong communication skills for conducting performance appraisals, managing disciplinary action, and motivating and training employees., • Committed to upholding corporate policies, procedures, and Occupational Health and Food Safety standards., • Comfortable speaking, reading, and writing in English. Work Hard, Play Hard: • Competitive pay, • Medical benefits, • Discounts, swag, and… honestly, too many good benefits to name, • Pay Rate: $21.00 per hour - $22.00 per hour

Job description: I work with high profile growing restaurant groups in San Diego, California. You are welcome to check out the list on my website, . Since we are growing, we need strong leaders. There is a common trait amongst managers that grow and get promoted. They can rally a crew. They understand the basic fundamentals of a proper service and the proper way to do things. They work hard and are dedicated to their craft. They are kind but clear and serious about the expectations they set. Currently I'm looking for an Executive Chef rooted in Greek cooking in a high volume, high profile restaurant; putting a current spot light on the region’s historical cuisine. Here, you'll make more of an impact exercising your judgment and taking an ownership mentality. If you dream of having your own restaurant or bar one day, I will work directly with you and show you the systems required to run and own your own place. Desired Outcomes when finding the right candidate: • Delighted guest through historical taste profiles and creative presentations., • Tight control with food and kitchen labor to stay inside of targets. Understands how to keep costs in line / fluent with a profit and loss statements., • Good ticket times generated by a streamlined and organized pre and in-service process. Kitchen keeps up with prep and production demands of high volume kitchen., • A great environment of accountability, learning and growing that generates line cooks and dish machine operators into sous chefs that eventually turn into chefs., • Operating, cleanliness and food safety systems in place as part of the execution culture. Natural attributes of a candidate for the perfect fit • Technical knowledge; Understands the origin taste profiles of Mediterranean Cuisine., • Cares about details., • Knows how to build and rally a team., • Creates an infectious environment for learning and growing. Loves to teach and mentor young cooks . Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Food provided, • Health insurance, • Paid time off, • Vision insurance Mandatory Application Question(s): • What was the last time you missed a professional goal? What happened and what was your take away?, • What exactly took place for you to find yourself on Indeed looking for a new job? What is your take-away from this moment?, • What makes you qualified to lead a team to cook this type of food?, • What will be the title to your autobiography?

Job Description Welder/Fitter - El Cajon, CA - Career Opportunity Job Description • Perform TIG and MIG welding on a wide range of assemblies in accordance with drawings and specifications., • Assist a journeyman welder with fit-up and fabrication tasks, ensuring accurate alignment and assembly of parts., • Read and interpret blueprints and weld symbols to determine weld locations, sequence, and required techniques., • Use fixtures and other tooling to position and secure components during welding and fabrication., • Operate hand grinders and related tools to prepare, clean, and finish welds and materials., • Weld exotic materials, including various alloys, Inconel, and 300/400 series stainless steel., • Weld materials of different thicknesses, such as .032, .060, .090, and .188, while maintaining weld quality and consistency., • Apply welding techniques using back gaps where required to achieve proper penetration and joint integrity., • Set up welding machines, including adjusting amperage and other parameters, to match material and weld requirements., • Document work performed, including type of rod used, type of weld, and other relevant process details., • Identify materials and accurately record information on travelers and related documentation., • Work on assigned jobs both within and adjacent to the core welding field, supporting fabrication and production needs as required., • Proficiency in TIG (GTAW) and MIG (GMAW) welding on assemblies., • Ability to read and interpret blueprints and weld symbols., • Hands-on experience with welding assembly and fixture usage., • Skill in welding exotic materials, including alloys, Inconel, and 300/400 series stainless steel., • Capability to weld materials in multiple thicknesses, including .032, .060, .090, and .188., • Experience setting up weld machines, including amperage adjustments and process parameters., • Competence in using hand grinders and related tools for material preparation and finishing., • Ability to document welding work accurately, including consumables used and weld types., • Skill in identifying materials and recording information on travelers and other production documents., • Ownership of a welding hood suitable for TIG and MIG welding operations., • Ability to fabricate parts under supervision while following detailed instructions and drawings., • Strong attention to detail and commitment to producing clean, consistent, and high-quality welds. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Entry Level Cleanroom Production Operator - 1st & 2nd Shift - Sorrento Valley Job Description The Cleanroom Production Operator works in the cartridge department within an ISO Class 8 cleanroom, assembling medical device cartridges on a manufacturing line. In this role, you operate and monitor semi-automated equipment, perform inspections, support sub-assembly and welding activities, and complete testing processes as part of a collaborative production team. You follow detailed work instructions and standard operating procedures (SOPs), maintain accurate batch records and documentation using computer-based systems, and help ensure a clean, safe, and compliant work environment. Responsibilities • Assemble cartridges on a manufacturing line while meeting quality and productivity targets., • Work collaboratively with a team to complete assemblies and support overall line performance., • Monitor and operate semi-automated manufacturing processes according to SOPs and work instructions., • Rotate and work within multiple production lines, including inspections, running automated machines, sub-assembly and welding, and testing., • Review batch records and production documentation for completeness and accuracy., • Use computer-based systems for training, documentation, and production-related tasks., • Follow cleanroom protocols and wear required personal protective equipment at all times., • Maintain a clean, organized, and safe work area in accordance with Good Manufacturing Practices (GMP)., • Adapt to changing priorities and support different departments or buildings as production needs shift., • Demonstrate reliable attendance, punctuality, and a strong work ethic to support continuous operations., • Experience following work instructions and standard operating procedures (SOPs) in any industry., • Ability to perform assembly work in a production or cleanroom environment., • Comfort using computers for training, documentation, and daily work tasks., • Strong attention to detail to support accurate assembly, inspection, and documentation., • Reliable attendance and punctuality to support a fast-paced production schedule., • Willingness to be flexible and take on a variety of tasks to get the job done., • Ability to work effectively as part of a team in a manufacturing line setting., • Capability to work in a fast-paced environment., • Previous experience in mechanical assembly or medical device assembly., • Experience with inspection, packaging, or other GMP-regulated production environments., • Familiarity with cleanroom production practices., • Openness to cross-training in different departments and learning new processes., • Ability to move between different buildings or departments as business needs require., • Comfort working overtime when needed to support high production demand. You join a large, stable organization where the immediate team operates with a close-knit, family-oriented culture. The environment emphasizes mutual respect and inclusivity, and all team members are treated with the same level of consideration and professionalism, whether they are long-term employees or contractors. You benefit from a supportive atmosphere where colleagues care about one another, leadership values reliability and collaboration, and there are ongoing opportunities to stay engaged as production ramps up over an extended period. Work Environment This role is based in the cartridge department within an ISO Class 8 cleanroom, where production volume and pace are expected to increase. Work is performed on a manufacturing line with semi-automated equipment, and employees may be reassigned to other departments or a nearby building, approximately 2.5 miles away, depending on workload and business needs. Flexibility with work location, tasks, and overtime is important, as operations are projected to remain very busy for at least the next 15 months. The cleanroom environment requires strict adherence to dress and hygiene standards, including wearing designated PPE such as hair covers, lab coats or gowns, and gloves; following handwashing and glove-use protocols; and avoiding fragrances, makeup, lipstick, and fake or acrylic nails. Pants are required (no leggings or shorts), necklaces must be tucked into shirts, and glasses must have side shields. The primary shift runs Monday through Thursday from 4:00 AM to 2:30 PM, and the work involves standing, moving between stations, and focusing on detailed tasks throughout the shift. Job Type & Location This is a Contract position based out of San Diego, CA. Pay and Benefits The pay range for this position is $17.75 - $17.75/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Production Operator- $17.75/HR. ENTRY LEVEL - No experience required! Job Description Join our dynamic team in the cartridge department as a Cleanroom Production Operator. You will work in a cleanroom setting, assembling cartridges, monitoring manufacturing processes, and ensuring quality and safety standards are met. Responsibilities • Assemble cartridges in a cleanroom environment., • Collaborate with a team on a manufacturing line to complete assemblies., • Monitor semi-automated manufacturing processes., • Work across four different lines: inspections, operating automated machines, sub-assembly/welding, and testing., • Review batch records and ensure documentation accuracy., • Ability to follow work instructions and standard operating procedures (SOPs)., • Proficiency in computer use for training and documentation., • Attention to detail and reliability., • Experience in mechanical assembly and medical device production., • Familiarity with inspection, GMP standards, and packaging., • Previous experience in a fast-paced environment is highly desirable. Be part of a great team culture where everyone cares for each other. Work in a large company with a family-like team, where respect is given to all employees, whether full-time or contract. Take pride in being part of a team that values respect and teamwork. Work Environment The position is based in the cartridge department, with potential work across other departments as needed. Work in an ISO Class 8 cleanroom, adhering to specific dress codes including cleanroom PPE, no fragrances, and no makeup. Flexibility is essential, as work locations may vary between buildings approximately 2.5 miles apart. Shifts run from 4:00 AM to 2:30 PM, Monday to Thursday. Job Type & Location This is a Contract position based out of San Diego, CA. Pay and Benefits The pay range for this position is $17.75 - $17.75/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Entry Level Cleanroom Production Operator - 1st & 2nd Shift - Sorrento Valley Job Description The Cleanroom Production Operator works in the cartridge department within an ISO Class 8 cleanroom, assembling medical device cartridges on a manufacturing line. In this role, you operate and monitor semi-automated equipment, perform inspections, support sub-assembly and welding activities, and complete testing processes as part of a collaborative production team. You follow detailed work instructions and standard operating procedures (SOPs), maintain accurate batch records and documentation using computer-based systems, and help ensure a clean, safe, and compliant work environment. Responsibilities • Assemble cartridges on a manufacturing line while meeting quality and productivity targets., • Work collaboratively with a team to complete assemblies and support overall line performance., • Monitor and operate semi-automated manufacturing processes according to SOPs and work instructions., • Rotate and work within multiple production lines, including inspections, running automated machines, sub-assembly and welding, and testing., • Review batch records and production documentation for completeness and accuracy., • Use computer-based systems for training, documentation, and production-related tasks., • Follow cleanroom protocols and wear required personal protective equipment at all times., • Maintain a clean, organized, and safe work area in accordance with Good Manufacturing Practices (GMP)., • Adapt to changing priorities and support different departments or buildings as production needs shift., • Demonstrate reliable attendance, punctuality, and a strong work ethic to support continuous operations., • Experience following work instructions and standard operating procedures (SOPs) in any industry., • Ability to perform assembly work in a production or cleanroom environment., • Comfort using computers for training, documentation, and daily work tasks., • Strong attention to detail to support accurate assembly, inspection, and documentation., • Reliable attendance and punctuality to support a fast-paced production schedule., • Willingness to be flexible and take on a variety of tasks to get the job done., • Ability to work effectively as part of a team in a manufacturing line setting., • Capability to work in a fast-paced environment., • Previous experience in mechanical assembly or medical device assembly., • Experience with inspection, packaging, or other GMP-regulated production environments., • Familiarity with cleanroom production practices., • Openness to cross-training in different departments and learning new processes., • Ability to move between different buildings or departments as business needs require., • Comfort working overtime when needed to support high production demand. You join a large, stable organization where the immediate team operates with a close-knit, family-oriented culture. The environment emphasizes mutual respect and inclusivity, and all team members are treated with the same level of consideration and professionalism, whether they are long-term employees or contractors. You benefit from a supportive atmosphere where colleagues care about one another, leadership values reliability and collaboration, and there are ongoing opportunities to stay engaged as production ramps up over an extended period. Work Environment This role is based in the cartridge department within an ISO Class 8 cleanroom, where production volume and pace are expected to increase. Work is performed on a manufacturing line with semi-automated equipment, and employees may be reassigned to other departments or a nearby building, approximately 2.5 miles away, depending on workload and business needs. Flexibility with work location, tasks, and overtime is important, as operations are projected to remain very busy for at least the next 15 months. The cleanroom environment requires strict adherence to dress and hygiene standards, including wearing designated PPE such as hair covers, lab coats or gowns, and gloves; following handwashing and glove-use protocols; and avoiding fragrances, makeup, lipstick, and fake or acrylic nails. Pants are required (no leggings or shorts), necklaces must be tucked into shirts, and glasses must have side shields. The primary shift runs Monday through Thursday from 4:00 AM to 2:30 PM, and the work involves standing, moving between stations, and focusing on detailed tasks throughout the shift. Job Type & Location This is a Contract to Hire position based out of San Diego, CA. Pay and Benefits The pay range for this position is $17.75 - $17.75/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Compensation Range: $30.00 - $36.00 Per Hour About Us: One of the reasons why we are the nation’s leading parking management expert is because we recognize that “people” are what makes our company successful. It is this recognition that serves as the foundation and building block for our continued growth and success. Having been in business for over 75+ years, we understand what it means to earn “Every Thank You,” which is treating our clients, partners, guests, and team members with utmost respect and courtesy. As one of the largest privately held management companies, we have the experience, passion, and the know-how to withstand the test of time and to disrupt the new marketplace with exploding new technologies. (About Us. Our Legacy) Culture: We have a strong, distinctive culture – a culture that is heavily influenced by a shared vision, style, and values. Our company values are the glue that binds our business, clients, and team members. There are some common traits that contribute to our unique culture. Clear values, caring, loyalty, humility, and deep commitment to community are just a few of them. These characteristics often steer our decision-making and define the way we treat our customers, clients, suppliers, and team members. We guard these values and attributes fiercely. Responsibilities: • Ensures legal compliance by monitoring and implementing applicable human resource federal and state requirements., • Execute strategy for Corporate HR initiatives and tailor delivery to division office(s), managing efficient rollout., • Provide day-to-day tactical HR leadership and counsel to management in the area of employment law and labor relations., • Provide guidance and support to employees in all areas of human resource administration including benefits, recruiting, and payroll ensuring administrative tasks are completed within deadlines., • Participate in grievance meetings, if applicable., • Identify policies and practices that produce legal, regulatory and/or ethical risks to the business or employees. Facilitate the discussion, planning and implementation of actions to mitigate potential risks., • Maintain and expand knowledge and understanding of existing and proposed federal and state laws/regulations affecting human resources management; identify trends and new developments that could impact organizational objectives and/or operational resources., • BA/BS degree in Business or related field, • Minimum of 2 years’ experience in an HR generalist role leading a region or division of 300+ employees., • Demonstrated expertise in all HR functional areas with a strong emphasis in employment law., • Proven knowledge of legal and regulatory requirements in functional area(s)., • Union experience a plus., • Experience managing employee relation issues through investigation to resolution., • Possess attention to detail, logic, and a methodological approach to problem solving. Understands the underlying issues and components of a problem or opportunity and perceives complex cause-and-effect patterns., • Superior communication skills, written and verbal, able to effectively address all levels within the organization., • Ability to operate independently., • Medical, dental, vision, life insurance coverage for full-time, eligible employees., • Flexible Spending Accounts for full-time, eligible employees, • 401k, • Vacation/Sick for full-time and part-time employees., • Holiday for full-time and part-time employees, • Discount programs. Ace Parking is committed to the full inclusion of all qualified individuals. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment, Ace Parking will ensure that persons with disabilities are provided reasonable accommodation. If reasonable accommodation is needed, please email: describing the accommodation. EEO/AA Employer – Women, Minorities, Veterans, and Individuals with Disabilities are encouraged to apply.

Job Description Labor One is hiring Shipfitter Helpers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:This position is responsible for assisting with steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges while under the supervision of a supervisor and/or journeyman / 1st Class shipfitter. The position requires a basic understanding of structural repair procedures and a strong aptitude and ability to follow directions. The individual must possess knowledge of ship terminology, measurements, and the ability to read job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions and general correspondence., 2. Working understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to effectively communicate issues encountered during the job that are in conflict with the directions provided by the supervisor or journeyman / 1st class fitter., 5. Ability to read and interpret structural drawings, including weld symbols., 6. Basic understanding of hand and power tools used by shipfitters including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 7. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 8. Up to one (1) year of experience in a heavy industry. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, before commencing work., 6. Complete daily work assignments and provide status of unfinished work to the journeyman or supervisor., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment. 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description About the Role We are looking for a motivated, safety-conscious Underground Construction Laborer to join our growing crew. In this role, you will be on the front lines of critical infrastructure work — digging, laying pipe, placing conduit, and helping build the underground utility systems that communities depend on every day. If you're someone who takes pride in hard, honest work and wants to build a long-term career in the trades, we want to hear from you. What You'll Do As an Underground Construction Laborer, your day-to-day responsibilities will include: • Excavating and backfilling trenches for the installation of water, sewer, gas, and telecommunications utilities, • Placing, joining, and splicing conduit, pipe, and cable in trenches, • Assisting equipment operators with trenchers, excavators, and compactors, • Shoring and bracing trench walls to ensure safe working conditions, • Reading and following utility maps and project blueprints under supervisor direction, • Cleaning and preparing job sites — removing debris, spoils, and hazardous materials, • Operating hand and power tools safely and effectively, • Following all OSHA safety standards, company safety policies, and site-specific requirements at all times What We're Looking For Required: • Ability to perform physically demanding labor outdoors in all weather conditions, • Willingness to work in and around trenches and excavations, • Strong work ethic, reliability, and punctuality, • Ability to follow instructions and work as part of a team, • Valid driver's license and reliable transportation Preferred (not required — we will train the right candidate): • 1+ year of experience in construction, utilities, or a related trade, • OSHA 10 or OSHA 30 certification, • First Aid/CPR certification, • Familiarity with hand tools, power tools, and basic construction equipment, • Experience with underground utility installation (water, sewer, gas, telecom)

Job Description Labor One is hiring Laborers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for supporting mechanics in the accomplishing of production tasks, including the use of small mechanical and hand tools. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Comprehend basic instructions and general correspondence., 2. Be able to clearly communicate verbally to warn others of fire or other danger., 3. Possess the skills required of a Fire Watch., 4. Have experience using small power tools and hand tools in a production environment., 5. Be able to wear clothing appropriate for the task. No exposed jewelry shall be worn while working. Finger nails shall be short. Long hair shall be worn in pony tail or wrapped for protection and should not interfere with hard hat. Ability to wear PPE, especially respirators. DUTIES AND RESPONSIBILITIES 1. Arrive at the designated work site at the assigned time. End the shift as directed by the schedule and your supervisor or mechanic., 2. Work shifts and overtime as assigned the supervisor., 3. Comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 5. If assigned as a fire watch, carry out the duties of a fire watch as delineated in the Fire Watch Labor Category including having a fire watch training card at the work site at all times., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Warn other personnel of danger, or to evacuate, by verbal or other prearranged method of communication. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS INCLUDE: (May be required to demonstrate any or all requirements.) 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 - 30 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. work under the guidance of the Crane Operator and Tender. 1st Shift 40 Hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Roofing Superintendent – Commercial Projects - San Diego, CA Job Description • Minimum 5 years of commercial roofing experience with a strong focus on TPO systems, • OSHA 30 certification required, • Supervisory experience required, must be comfortable leading and managing a crew of 15+, • Ability to oversee the full scope of a commercial TPO project from mobilization to closeout, • Working knowledge of metal roofing systems is a strong plus, • Must be able to read plans, manage production, and hold the job to schedule and quality standards Responsibilities • Lead and supervise a commercial roofing crew of up to 15 employees, including foremen, mechanics, and laborers., • Conduct daily safety huddles and pre-task planning meetings to review work activities and potential hazards., • Complete Job Hazard Analyses (JHA) and ensure all safety plans and procedures are followed in the field., • Drive daily and weekly production goals while maintaining quality workmanship and safety standards., • Enforce all safety standards and company safety policies on active job sites., • Coordinate work activities with other trades and general contractors to keep projects running smoothly., • Communicate effectively with project management and field leadership regarding progress, issues, and resource needs., • Monitor job progress closely and take action to help keep projects on schedule and within scope., • Promote accountability, teamwork, and strong field leadership within the crew., • Demonstrate strong on-site leadership and problem-solving skills to address field challenges quickly and effectively., • Consistently meet production and schedule expectations while maintaining a safe jobsite with minimal incidents., • At least 5 years of experience in commercial roofing., • Proven experience supervising and leading roofing crews in the field., • Strong knowledge of jobsite safety and safety management practices., • Ability to communicate clearly in verbal conversations, text messages, and email., • Experience working alongside other trades and general contractors on commercial projects., • Ability to drive production while maintaining quality and safety standards., • Hands-on experience with TPO commercial roofing systems., • Hands-on experience with PVC commercial roofing systems., • Construction and roofing expertise with a minimum of 5 years of experience., • Demonstrated leadership skills managing field personnel., • Strong communication skills for coordinating with crews and project stakeholders., • Commitment to safety and adherence to safety procedures and policies., • Superintendent-level experience overseeing field operations., • Proficiency with MS Office for basic reporting and communication., • Additional experience with a broad range of roofing systems beyond TPO and PVC., • OSHA 30 certification., • Current CPR certification., • Ability to collaborate effectively with multiple trades on complex commercial job sites., • Strong organizational skills to manage timecards, documentation, and compliance requirements. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Labor One is hiring Insulator Helpers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing the installation and removal of insulation of any component onboard ships. A Helper works under the guidance of an Improver, Journeyman, and Supervisor to measure, cuts and fabricates materials for insulation application to bulkheads, overheads, piping, ducts, machinery, and equipment to minimize heat transfer, prevent moisture condensation, and to deaden sound. Work is accomplished in all phases of ship repair and modernization of maritime vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a basic knowledge of procedures and the insulation craft, and the drive to accomplish quality work and learn. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Musty have a basic understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write a report for the supervisor or journeyman describing the material condition of the ship as it pertains to the assigned work item., 5. Must be able to effectively confer job related information to the improver, journeyman, and supervisor., 6. Must have experience using hand and power tools associated with the trade in a safe manner., 7. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 8. Two (2) years of related experience, some of which must be in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Must arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Must keep the work area clean and safe at all times, especially at the end of the shift., 5. Must follow the direction provided by the supervisor, improver, and journeyman., 6. Complete daily work assignments and provide status of unfinished work., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals required to accomplish the insulation task., 8. Assist with providing Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Carry out instructions furnished in written, oral, or diagram form. Work with the supervisor, journeyman, and Improver to resolve, in a professional manner, unexpected events related to your assigned task. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel. 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 4. Work at a variety of levels and positions (ex. Waist, eye, above head)., 5. Good balance while working on uneven surfaces and maneuvering obstacles., 6. Sufficient handgrip and coordination to carry and operate tools and equipment., 7. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd shift 40 hours a week; overtime with supervisors approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description SD Quality Moving Company is looking for hard-working, part-time OR full-time, reliable, and experienced Movers who can safely drive trucks or manage a job as a foreman. Qualifications include: The ideal candidate should have moving experience, local delivery driving experience, experience driving vans, 20 FT, and 26 FT trucks. Must be able to lift 40 lbs or over. The selected candidates need to have a valid and clean driver's license. CDL is NOT required but the truck experience is. All Drivers are also required to be Movers. This is not a driver only position - the job does require physical labor. Must be team-oriented, willing to accept instruction, and handle a variety of tasks under stress. Be able to load and unload a truck, wrap furniture, and pack and prepare the items. The schedule can be part-time or full-time and flexible AND a full commitment for the last week of every month is required. Drivers and foremen might be required to work as helpers when needed. Compensation is hourly based, plus tips and charges. Company DescriptionWe’ve been in business for more than 10 years providing our residential and commercial clients with the best in class moving service. We specialize in both local and affordable stress-free long distance moving services across the United States. High-quality, licensed and insured equipment, professional friendly team and customer support are guaranteed no matter if you are moving a small house or a large business.We’ve been in business for more than 10 years providing our residential and commercial clients with the best in class moving service.\r\nWe specialize in both local and affordable stress-free long distance moving services across the United States.\r\nHigh-quality, licensed and insured equipment, professional friendly team and customer support are guaranteed no matter if you are moving a small house or a large business.

Job Description Entry-Level Vinyl Cutter - 1st Shift - $20/hr - South Park Job Description We are seeking a detail-oriented and motivated Entry-Level Vinyl Cutter / Vinyl Applicator to join a busy sign manufacturing team. In this role, you will prepare surfaces, cut vinyl, and apply graphics to a variety of substrates, ensuring clean, precise, and visually appealing finishes that meet client specifications. You will work hands-on with vinyl materials and tools in a fast-paced production environment, contributing directly to the quality and appearance of finished signs and graphics. Responsibilities • Prepare surfaces for vinyl application by thoroughly cleaning and ensuring they are free of dust, dirt, and debris., • Measure and cut vinyl materials to the required size and shape using cutting tools and equipment., • Apply vinyl graphics to a variety of surfaces, including vehicles, windows, walls, and signs, ensuring proper alignment and smooth finishes., • Use squeegees, heat guns, and other tools to remove air bubbles and achieve a seamless application., • Inspect completed work for quality and accuracy, making any necessary adjustments or corrections., • Maintain a clean, organized, and safe workspace, including proper storage of vinyl materials, tools, and equipment., • Collaborate with team members in other departments to complete projects on time and meet client expectations., • Follow all safety protocols and guidelines while performing tasks in a manufacturing environment., • Ability to perform precise, hands-on work with vinyl materials and cutting tools., • Strong attention to detail to ensure accurate measurements, clean cuts, and high-quality finishes., • Capability to follow written and verbal instructions and adhere to client specifications., • Comfort working in an industrial or manufacturing environment with general labor tasks., • Basic mechanical aptitude to use tools such as squeegees, heat guns, and cutting equipment safely and effectively., • Reliability, strong work ethic, and willingness to learn vinyl application techniques., • Experience in industrial, manufacturing, or general labor settings is helpful but not required for entry-level candidates., • Familiarity with vinyl cutting, weeding, and application processes is a plus., • Interest in sign manufacturing, graphics, or related trades., • Willingness to watch training materials and demonstrations to learn proper techniques. You will join a growing sign manufacturing operation that values hands-on craftsmanship, teamwork, and continuous learning. Once converted to a permanent role, you become eligible for comprehensive medical benefits, a 401(k) plan, and profit sharing, reflecting a commitment to long-term employee growth and financial well-being. The environment supports skill development, offers exposure to a variety of projects, and provides the opportunity to build a stable career in a specialized trade. Work Environment This role is based in a manufacturing facility that produces signs and related graphics. You will work in a loud, active environment with multiple departments operating simultaneously. The position is hands-on and physically engaging, involving time on your feet and working directly with vinyl materials, cutting tools, squeegees, and heat guns. You will collaborate closely with production team members in a shop setting where safety procedures and proper use of equipment are emphasized. Dress is practical and appropriate for a manufacturing and production environment. Job Type & Location This is a Contract to Hire position based out of San Diego, CA. Pay and Benefits The pay range for this position is $20.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Labor One is hiring Journey-Level Insulators for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, the installation and removal of insulation of any component onboard ships. A journeyman measures, cuts and fabricates materials for insulation application to bulkheads, overheads, piping, ducts, machinery, and equipment to minimize heat transfer, prevent moisture condensation, and to deaden sound. Wok is accomplished in all phases of ship repair and modernization of maritime vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, comprehensive knowledge of the insulation craft and the drive to accomplish quality work on schedule. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Musty have a comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to effectively confer job related information to the supervisor, improvers, and helper., 6. Must have experience applying hullboard, Armaflex, Cal-sil, ventilation insulation, and insulation pads., 7. Must have experience fabricating insulation pads., 8. Must have experience using hand and power tools associated with the trade in a safe manner., 9. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 10. Must possess a basic understanding of the metric system., 11. Six (6) years of related experience, three (3) of which must be in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Must arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Must keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals required to accomplish the insulation task., 8. Provide guidance to Improvers and Helpers., 9. Provide Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 10. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 11. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description ODORZX INC is seeking a dedicated and versatile Operations Manager who is not afraid to roll up their sleeves and lead by example. If you possess strong organizational skills, a hands-on approach, and a passion for driving operational excellence, this might be the perfect opportunity for you! Must Have Previous Rental Car Company Experience to be considered Responsibilities: • Oversee and manage day-to-day operations, ensuring smooth functioning across multiple departments, • Develop and implement operational strategies, policies, and procedures to optimize efficiency and productivity, • Lead a team of employees, providing guidance, training, and performance evaluations, • Coordinate and monitor all aspects of the supply chain, including procurement and inventory management, • Analyze operational data and metrics to identify areas for improvement and implement solutions to enhance productivity and cost-effectiveness, • Foster a culture of safety, emphasizing adherence to established protocols and promoting a safe working environment., • Lead by example by actively participating in manual labor tasks, demonstrating a strong work ethic and dedication to the team's success, • Collaborate with cross-functional teams to ensure seamless communication and alignment of operational goals., • Develop and maintain strong relationships with clients, suppliers, and contractors to ensure timely and quality service delivery. Qualifications: • Proven experience in an operations management role, preferably within the carwash/detailing industry, • Strong leadership skills, with the ability to motivate and inspire a team, • Excellent organizational and problem-solving abilities., • Proficient in analyzing and interpreting operational data, • Demonstrated ability to manage multiple priorities and meet deadlines, • Effective communication and interpersonal skills If you are ready to make a meaningful impact, bring your operational expertise to the table, and lead a team by example, we invite you to apply for the position of Operations Manager. Join us in shaping the future of our company and delivering exceptional results. ODORZX INC is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Benefits Full Time Benefits Include: • Vacation Time (1 Year), • 401k With Match (1 Year), • Medical Benefits (Medical, Dental, Vision), • Sick Time, • Personal Days (1 Year), • Company Paid Holidays, • Company Paid Car, Gas, Insurance (Job Specific), • Company Paid Travel (Job Specific), • Employee Referral Program, • Retention Bonus (Job Specific), • Quarterly Bonus (Job Specific), • Rapid Advancement Opportunities

Job Description About the Job: As a Shift Manager, you’ll be the driving force behind our team—leading shifts with energy and passion to meet Taco Bell’s high standards. You’ll take charge, resolve customer concerns, and ensure every guest leaves satisfied. Your leadership will inspire others as you coach and guide your team to success. Partnering with the management team, you’ll play a key role in business initiatives and help shape the future of our restaurant. This role is perfect for someone who thrives in a fast-paced environment and is ready to take ownership and drive results. The Day-to-Day: • Ensure consistent customer satisfaction by executing the MIC (Manager in Charge) Success Routine and prioritizing customer needs, • Oversee team members' completion of Shift Excellence tasks and maintain clean, neat appearances, • Ensure food safety, quality, and accuracy of orders, • Resolve customer complaints promptly while maintaining positive customer relations, • Provide regular feedback to the GM on team member performance, • Offer ongoing, constructive, and positive feedback to team members, • Actively participate in training team members, • Handle conflicts constructively and work with the GM to achieve resolution, • Assist the GM in screening team member candidates, • Assist with Profit & Loss management by following cash control and security procedures, maintaining inventory, and managing labor, • Oversee proper product preparation, rotation, portioning, cooking, and holding times, • Assist the GM with facility maintenance and ensure health and safety standards are always followed Is This You? • 1 year of restaurant/retail experience, with 3 months of shift lead experience preferred, • Adheres to cash handling, security, inventory, and labor policies, • Must be at least 18 years of age, • Reliable and dependable transportation, • Excellent communication, leadership, and organizational skills, • Physical dexterity required (ability to move up to 45 lbs. from one area to another), • Strong attendance and punctuality, • Ability to operate the cash register and make change for other cashiers, • Basic math skills, • Maintains customer satisfaction and adheres to health and safety standards, • Promotes and champions Taco Bell’s culture and values, • Provides constructive feedback to team members, • Executes shift duties accurately and efficiently, • Promotes equity, inclusion, and belonging, • Ensures teammates and customers enjoy a positive experience, • Comfortable speaking, reading, and writing in English Work Hard, Play Hard: • Competitive pay, • Medical benefits, • Discounts, swag, and… honestly, too many great benefits to name, • Pay Rate: $21 per hour - $22 per hour

Job Description Associate Attorney – Public Entity Labor and Employment Practice Group Specific skills sought are: • At least three years of experience handling labor and employment matters, exclusively or predominantly as part of the candidate’s overall legal practice, for public and/or private clients;, • Experience with public sector clients such as cities, counties, and special districts or a demonstrated interest in public sector work is preferred;, • Experience with preparing a labor and employment case for trial/arbitration including actually participating in trials and/or arbitrations and in administrative proceedings;, • Knowledge and experience of public sector labor and employment law, including collective bargaining, administrative proceedings before Public Employment Relations Board (“PERB) , and employee benefit/PERS issues;, • Deposition experience both as to percipient witnesses and expert witnesses in labor and employment cases and law and motion experience involving discovery issues or experience interviewing witnesses, as part of case preparation/evaluation or workplace investigations;, • Experience putting together discovery plans and executing same;, • Excellent writing skills including motions for summary judgment in labor and employment cases;, • Ability to handle and manage, with limited supervision and oversight, preparing and responding to written discovery;, • Excellent legal research and analysis skills and demonstrated ability to perform comprehensive research on specific timelines;, • Experience supporting more senior attorneys in providing labor and employment advice, both verbally and in preparing legal memorandums and opinions;, • Ability to interface with the client and convey a level of professionalism and competence in terms of both the legal and strategic issues in labor and employment matters;, • Willingness to take ownership of a matter and ability to develop a litigation plan and/or course of action;, • Self-starter and excellent follow-through skills;, • Hard worker;, • Impeccable judgment;, • An entrepreneurial spirit.

Job Description A McCarthy & Holtus , and our affiliate companies, we have years of expertise in representing financial institutions across a wide range of banking law matters, and we’re looking for passionate, driven candidates to join our dynamic team! With offices in Arizona, Arkansas, California, Colorado, Nebraska, Nevada, New Mexico, Oregon, Texas, and Washington, we offer opportunities across multiple locations. Our workplace is more than just a job – it’s a supportive, collaborative environment where your contributions truly matter. You’ll be part of a team that values hard work, creativity, and dedication, while enjoying a strong sense of community. We offer performance-based bonuses, competitive compensation, and a range of incentives that reward your success. Plus, with generous benefits, enhanced employer contributions, and paid time off, we prioritize your well-being and work-life balance. Summary: An established California law firm is seeking an Unlawful Detainer Attorney to handle high-volume eviction and landlord-tenant litigation matters. The role involves managing cases from intake through trial, including drafting pleadings, conducting discovery, negotiating settlements, and making frequent in-person court appearances. Ideal candidates will have strong litigation skills, deep knowledge of California landlord-tenant law, and the ability to thrive in a fast-paced, deadline-driven environment. Key Responsibilities: • Drafting Notices: Prepare 3-Day and 30-Day Notices for the tenant., • Preparing Complaints and Responses: Draft unlawful detainer complaints and responses to be filed in court., • Requesting Trials: Promptly request an immediate trial to expedite the process., • Serving Defendants: Ensure proper service of the unlawful detainer papers to the defendants., • Obtaining Judgments: Assist in obtaining judgments from the court., • May perform other duties as assigned to support department goals., • Teamwork: Ability to work independently while managing multiple matters and collaborating with a supportive team., • Client Interaction: Excellent communication and persuasive speaking skills to effectively interact with clients and colleagues., • Legal Research: Proficiency in legal research to gather and analyze case law and statutes relevant to unlawful detainer cases. The work week is typically Monday through Friday, with business hours from 8:00 AM to 5:00 PM. Employees may be required to be onsite 2-3 days per week following a 90-day training period and upon management approval. 100% remote may also be possibility upon management approval. Salary Range: The salary for this position typically ranges from 100,000.00-150,000.00, depending on qualifications, experience, and other factors. Please note that the final offer may differ based on the candidate's specific qualifications, skills, and experience, as well as internal equity and business needs. Benefits: McCarthy & Holthus and affiliated companies promote work/life balance with a robust wellness program, PTO, remote work, and flexible schedules (when available). Full-time employees become eligible for benefits following a 30-day waiting period, with benefit offerings that include medical, dental, vision, life, AD&D, EAP, STD, and LTD. Additionally the firm provides parental leave for both primary and non-primary caregivers as well. Also available are voluntary income protection benefits such as supplemental life, accident, critical illness, and short and long-term care insurances, as well as a 401(k)-retirement plan with a company match. Part-time employees may have access to some of these benefits, which may be on a pro-rated basis. Security Requirement: While performing the duties of this job, the employee is required to ensure the security and confidentiality of all sensitive information, including but not limited to threats or hazards to the security or integrity of sensitive information that could result in any harm or inconvenience to any customer, employee or company. Work Environment: A corporate office environment with a professional setting, characterized by a quiet to moderate noise level. Employees may work in individual or shared workspaces, with standard office equipment such as computers, printers, and telephones. Occasional meetings, collaborative discussions, and business activities may contribute to variations in noise levels. Next Steps: Ready to take the next step? Apply now and be part of our thriving team! Career Center | Recruitment Notices: The above information on this job description is designed to indicate the general nature and level of work performed by incumbents. Other duties and responsibilities not specifically described may be assigned from time to time, consistent with the knowledge, skills, and abilities of the incumbent. McCarthy & Holthus is an Equal Opportunity Employer. We are committed to providing a work environment free from discrimination and harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. We celebrate diversity and are dedicated to creating an inclusive environment for all employees. Qualified applicants with a criminal history will be considered pursuant to the San Diego County Fair Chance Ordinance, the California Fair Chance Act, and other applicable state or local laws. You do not need to disclose your criminal history or participate in a background check until a conditional job offer is made. After making a conditional offer and running a background check, if there are concerns about a conviction directly related to the job, you will be given the chance to explain the circumstances, provide mitigating evidence, or challenge the accuracy of the background report. For more information about the Fair Chance Ordinance, visit the San Diego County Office of Labor Standards and Enforcement webpage. As part of our commitment to maintaining a lawful and compliant workforce, we participate in the E-Verify program. All candidates who accept a job offer will be required to complete the E-Verify process to verify their employment eligibility in the United States. Applications will be accepted until 6/1/26.

Job Description Become part of a strong service team at one of San Diego’s largest and most respected group of dealerships, which services Dalton Toyota National City, Dalton Subaru National City, and Dalton Hyundai National City. This is a great opportunity to work with an industry leader known for its friendly and welcoming environment, exceptional customer service, and large and loyal customer base. We are looking for experienced service advisors/consultants who are enthusiastic, honest, hard-working, organized, committed to great customer service, and want to be a top earner in their field. Our Service Advisors’ annual gross wages commonly range between $72,000 and $120,000 (salary plus commission) or more based on your skills. Company and Service Department Overview: Dalton Motors services Dalton Toyota National City and Dalton Subaru National City, and is located less than 20 minutes from most areas of San Diego. Founded in Guadalajara in 1945, Dalton Motors is a family owned and operated business with over 30 dealerships serving major manufacturers including Toyota and others. They are continuing the legacy of Frank Motors, an automotive and community presence since 1965. Dalton Motors has a large and well stocked parts department and a Service Development Center (SDC) dedicated to setting and reminding customers of their service appointments. We have extremely knowledgeable and experienced service advisors who are highly productive and used to working in a fast-paced, customer friendly environment. We have ongoing training for our staff, including technician and service advisor/consultant training from the manufacturer, new product on-line training, and job specific training by our in-house trainer. Our service and parts areas run very smoothly in large part due to our solid processes and trained, skilled staff, many of whom have been at our stores for twenty years or more. Some of what you will do: • Greet customers and create a welcoming and friendly environment, • Perform a walk around of the customers vehicle with the customer, • Update Customer Information, • Work with the customer to evaluate their service needs, review past service history, and make recommendations for repairs, • Check for open Recalls, • Instill confidence in the customer by completing accurate estimates for parts and labor, • Partner with service technicians to ensure work is completed and done on time, • Build trust in customers by checking up on repairs, explaining completed work, and ensuring customer satisfaction, • Continue to develop your skills through training and experience and take your career to new heights! What we are looking for: Minimum of 5 years automotive service advisor experience. • Minimum of a high school diploma or equivalent, • Valid driver's license, • At least two years of service advising experience, • Excellent communication skills, both written and verbally, • Outstanding customer service skills, • Proficient Computer Skills, • Professional work ethic and high integrity, • Ability to work as a team and/or independently, • Full Benefits 1st of the month after 60 days of employment including Health, Vision, & Dental Insurance, • 401k plan, • Paid vacation, • Paid manufacturer product training, • Employee Assistance Program, • Employee vehicle purchase program, • Advancement opportunities Supplemental pay types: • Driver's License

Job Description Become part of a strong service team at one of San Diego’s largest and most respected group of dealerships, which services Dalton Toyota National City, Dalton Subaru National City, and Dalton Hyundai National City. This is a great opportunity to work with an industry leader known for its friendly and welcoming environment, exceptional customer service, and large and loyal customer base. We are looking for experienced service advisors/consultants who are enthusiastic, honest, hard-working, organized, committed to great customer service, and want to be a top earner in their field. Our Service Advisors’ annual gross wages commonly range between $72,000 and $120,000 (salary plus commission) or more based on your skills. Company and Service Department Overview: Dalton Motors services Dalton Toyota National City and Dalton Subaru National City, and is located less than 20 minutes from most areas of San Diego. Founded in Guadalajara in 1945, Dalton Motors is a family owned and operated business with over 30 dealerships serving major manufacturers including Toyota and others. They are continuing the legacy of Frank Motors, an automotive and community presence since 1965. Dalton Motors has a large and well stocked parts department and a Service Development Center (SDC) dedicated to setting and reminding customers of their service appointments. We have extremely knowledgeable and experienced service advisors who are highly productive and used to working in a fast-paced, customer friendly environment. We have ongoing training for our staff, including technician and service advisor/consultant training from the manufacturer, new product on-line training, and job specific training by our in-house trainer. Our service and parts areas run very smoothly in large part due to our solid processes and trained, skilled staff, many of whom have been at our stores for twenty years or more. Some of what you will do: • Greet customers and create a welcoming and friendly environment, • Perform a walk around of the customers vehicle with the customer, • Update Customer Information, • Work with the customer to evaluate their service needs, review past service history, and make recommendations for repairs, • Check for open Recalls, • Instill confidence in the customer by completing accurate estimates for parts and labor, • Partner with service technicians to ensure work is completed and done on time, • Build trust in customers by checking up on repairs, explaining completed work, and ensuring customer satisfaction, • Continue to develop your skills through training and experience and take your career to new heights! What we are looking for: Minimum of 5 years automotive service advisor experience. • Minimum of a high school diploma or equivalent, • Valid driver's license, • At least two years of service advising experience, • Excellent communication skills, both written and verbally, • Outstanding customer service skills, • Proficient Computer Skills, • Professional work ethic and high integrity, • Ability to work as a team and/or independently, • Full Benefits 1st of the month after 60 days of employment including Health, Vision, & Dental Insurance, • 401k plan, • Paid vacation, • Paid manufacturer product training, • Employee Assistance Program, • Employee vehicle purchase program, • Advancement opportunities Supplemental pay types: • Driver's License

Job DescriptionJob Title: Entry-Level Vinyl Cutter / Vinyl Applicator Job Description We are seeking a detail-oriented and motivated Entry-Level Vinyl Cutter / Vinyl Applicator to join a busy sign manufacturing team. In this role, you will prepare surfaces, cut vinyl, and apply graphics to a variety of substrates, ensuring clean, precise, and visually appealing finishes that meet client specifications. You will work hands-on with vinyl materials and tools in a fast-paced production environment, contributing directly to the quality and appearance of finished signs and graphics. Responsibilities • Prepare surfaces for vinyl application by thoroughly cleaning and ensuring they are free of dust, dirt, and debris., • Measure and cut vinyl materials to the required size and shape using cutting tools and equipment., • Apply vinyl graphics to a variety of surfaces, including vehicles, windows, walls, and signs, ensuring proper alignment and smooth finishes., • Use squeegees, heat guns, and other tools to remove air bubbles and achieve a seamless application., • Inspect completed work for quality and accuracy, making any necessary adjustments or corrections., • Maintain a clean, organized, and safe workspace, including proper storage of vinyl materials, tools, and equipment., • Collaborate with team members in other departments to complete projects on time and meet client expectations., • Follow all safety protocols and guidelines while performing tasks in a manufacturing environment., • Perform general industrial and labor tasks related to sign production as needed.Essential Skills, • Ability to perform precise, hands-on work with vinyl materials and cutting tools., • Strong attention to detail to ensure accurate measurements, clean cuts, and high-quality finishes., • Capability to follow written and verbal instructions and adhere to client specifications., • Comfort working in an industrial or manufacturing environment with general labor tasks., • Basic mechanical aptitude to use tools such as squeegees, heat guns, and cutting equipment safely and effectively., • Reliability, strong work ethic, and willingness to learn vinyl application techniques., • Ability to work collaboratively with a team to meet deadlines and production goals.Additional Skills & Qualifications, • Experience in industrial, manufacturing, or general labor settings is helpful but not required for entry-level candidates., • Familiarity with vinyl cutting, weeding, and application processes is a plus., • Interest in sign manufacturing, graphics, or related trades., • Willingness to watch training materials and demonstrations to learn proper techniques., • Organizational skills to manage materials, tools, and multiple projects efficiently.Why Work Here? You will join a growing sign manufacturing operation that values hands-on craftsmanship, teamwork, and continuous learning. Once converted to a permanent role, you become eligible for comprehensive medical benefits, a 401(k) plan, and profit sharing, reflecting a commitment to long-term employee growth and financial well-being. The environment supports skill development, offers exposure to a variety of projects, and provides the opportunity to build a stable career in a specialized trade. Work Environment This role is based in a manufacturing facility that produces signs and related graphics. You will work in a loud, active environment with multiple departments operating simultaneously. The position is hands-on and physically engaging, involving time on your feet and working directly with vinyl materials, cutting tools, squeegees, and heat guns. You will collaborate closely with production team members in a shop setting where safety procedures and proper use of equipment are emphasized. Dress is practical and appropriate for a manufacturing and production environment. Job Type & Location This is a Contract to Hire position based out of San Diego, CA. Pay and Benefits The pay range for this position is $20.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Please note relocation is required for this role to: Odessa, TX Certified Surgical Tech - Labor & Delivery Odessa Regional Medical Center’s reputation for delivering personalized, professional medical care is built on the hard work and dedication of physicians, nurses, technologists and other members of our healthcare team. We offer outstanding career opportunities for qualified people who share our commitment to providing expert healthcare and excellent customer service. Our employees enjoy opportunities for professional development and career advancement, as well as a competitive compensation and benefits package. Position Details: • Shift: FT Nights, • Prepares and maintains medical equipment for surgical procedures., • Follows hospital regulations and industry procedures to tend to patient during pre-operation procedures., • Performs preoperative preparations to the patient's skin, body and medical equipment., • May be required to transport patient to and from the operating room., • Relies on limited experience and judgment to plan and accomplish goals., • Performs a variety of tasks., • Active State of Texas licensure., • A graduate of an accredited surgical technologist program., • Must be certified to perform CPR., • Minimum 1 year of clinical experience., • Competitive salary and benefits package., • Opportunities for professional development and advancement., • Supportive work environment with a collaborative team., • Comprehensive healthcare coverage., • Retirement savings plan., • Paid time off and flexible scheduling options., • Student loan repayment program. #ZR #EXP

Job Description Labor One is hiring Outside Machinist Improvers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on maritime vessels including US Navy, Military Sealift Command, and commercial. The work occurs in various stages of repair and modernization and requiring the ability to operate a wide variety of tools and machinery, and the ability to read and comprehend specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have basic print (drawing) reading and interpretation skills., 3. Must have a working understanding of ship repair terminology and ship compartment location nomenclature., 4. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 5. Must be able to write reports describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 6. Must be able to work from Process Control Procedures (PCP)., 7. Must be able to use precision measurement tools., 8. Must be able to effectively confer job related information to the structural supervisor and small groups, and provide technical guidance to Helpers and Improvers., 9. Must have a basic understanding of drawings, sketches, tech manuals, and user manuals., 10. Must understand the NAVSEA standard items, especially 009-04 for tests, inspections, and check points; 009-23 for interferences; and 009-24 for blanking and match marks., 11. Must have a comprehensive understanding of Lock-out / Tag-out procedures., 12. Must understand the proper and safe use and operation of the hand and power tools required to accomplish the work., 13. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system and the metric system., 14. Three (3) years of machinist experience, preferably one (1) of which is in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Keep the work area clean and safe at all times, especially at the end of the shift., 5. Complete work assignments as scheduled and provide status of unfinished work for shift turnover., 6. Assist with the preparation of Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which requires that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 8. Receive technical guidance and carry out directions from a Journeyman or Supervisor., 9. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: a. Prepare a safe work area especially as it relates to fire prevention. b. Assist in the coordinate work with other crafts to disconnect and remove equipment. c. Compile as-found reports identifying the status of equipment prior to work. d. Assist with in-place valve repairs. e. Assist with material take offs with adequate information for ordering. f. Assist with equipment alignment. g. Assist with operational tests. h. Keep blanking logs up to date. i. Run and remove lines and leads as required to accomplish work and in accordance with OSHA and the shipyards safety standards. j. Assist with Lock-out Tag-out activities for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that personnel may encounter every day in the course of performing work on ships, piers, docks. While performing the duties of this position the employee is regularly required to: stand; walk; use hands and fingers to handle directly or work from touch; reach out with arms; climb; stoop; kneel; crouch; crawl; and communicate in a loud environment. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: Candidates may be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 hours a week. Overtime with Supervisors approval. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionPosition: Design Consultant / In Home Sales Representative - San Diego County As the In Home Design Consultant, you will be designing and selling shower and bath renovations to our customers. Our sales team earns from $150,000 to $350,000 per year running pre-set leads. Your only focus will be selling. You will run two appointments per day and close a minimum of 2-3 sales per week. 85% of our appointments you are given will sit. While this job is not for everybody, everybody can learn how to master it. The products and installation techniques that we use as a company are the absolute best in the industry and our sales commission structure is the best in the industry. If you believe you can sell, and are willing to learn our products and sales techniques you can and will be successful. After reading this, you are probably thinking “This sounds like some used car sales job”. That’s not what this is. We expect our sales representatives to act with integrity during every interaction and truly do what is best for the customer. We will teach you to LISTEN to the customer, identify their needs, make a connection, have fun with them, and help them design a beautiful space while explaining why Shugarman’s Bath is the best choice of companies for them to work with. If you’re ready to put your sales skills to work in a top-notch, supportive environment and earn amazing commissions while helping homeowners create their dream bathrooms, we’d love to hear from you! This position reports to the Owner/Sales Manager. About Us: We are a family-owned and operated company dedicated to providing top-notch bathroom remodeling, specializing in shower and bath remodeling in San Diego, Orange County, and beyond. Shugarman’s Bath was honored with the title of “Best Kitchen & Bath Remodeler” by SD Best in 2022, 2023, 2024, 2025, and we are in the Top 500 Nationally. At Shugarman’s Bath, we don't just value quality; we prioritize it. We believe in creating bathrooms that exceed expectations and provide lasting satisfaction. As our team continues to grow and expand, we are searching for a new sales member in San Diego County! If you are hired, you are not just joining a company, you will be joining a team, and a family. We’re not just a 5 star company - we’re a team that truly cares! Our customers love their experience with us, and it shows in our Google and Yelp reviews, and the stunning transformations on Instagram @shugarmansbath. We go above and beyond, and the results speak for themselves - we have never had a BBB complaint! But don’t just take our word for it – see what our customers say! We’ve included some reviews at the bottom of this post. Why You'll Love Working With Us: • Be Part of a Winning Team: Join a company recognized as the best in the industry and contribute to our continued success and growth., • Make a Difference: Your work will directly impact our customers’ lives by minimizing their stress, making their home safer, and ensuring they have an awesome remodeling experience., • Previous In-Home Sales experience? Great! But if not, we’ll provide all the training you need to succeed., • Our sales team must have a Home Improvement Salesperson License - If you don’t possess one, that’s okay, but you must be able to obtain one. A fingerprint and background check will be required by the CSLB. We will cover the cost of your application., • Reliability is key—do what you say you will, when you say you will, every time., • Ability to listen and learn., • Quick thinking and problem-solving skills., • Must have reliable transportation and a valid driver’s license., • Willingness to work weekends and evenings., • Desire to grow with a growing business!, • 100% Commission. In 2024, our newest sales member earned $150K, while our top performer hit $330K! - unlimited potential for those ready to excel!, • 8 paid holiday per year, • 40 hours of paid sick time per year, • Paid Training, • Eligible to participate in the company 401(k) after 90 days!, • Access to company insurance plans; purchase health, dental and vision in with pre-tax dollars and at a lower rate., • Medical. The Company will contribute 50% of the cost of the lowest plan. These plans are offered through Anthem Blue Cross, Kaiser, and Mediexel., • HSA and FSA, • Other benefits available., • Schedule: Varies, • Exempt position At Shugarman's Bath we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, creed, sexual orientation, gender identity or expression, age, religion, national origin, citizenship status, disability, ancestry, marital status, veteran status, medical condition or any protected category prohibited by local, state or federal laws. We look forward to reviewing your application! Check Out Some Of Our Reviews: Okay, we know this is a bit of a novel, but trust us, it’s worth the read! We’re just so excited and proud of these experiences, we couldn’t help ourselves. Grab a cup of coffee, settle in, and check out these glowing reviews that have us smiling from ear to ear. From B.F. “If you are on the fence about purchasing one, get off the fence and do it. This was a great addition to the house, adds some value, but more importantly delivered on everything promised and more. I have absolutely no buyer's remorse here, this was absolutely worth it. I work two jobs, and one is some fairly serious outdoor labor. I'm also pretty close to retirement. At a certain age your whole skeleton hurts, 7/24. This is like having your own private jacuzzi at home. Even with the jets off, it's just so comfortable to just sit in a tub where you can enjoy a NORMAL seated posture. I could sit in there until plasmolysis sets in. Part of the experience is just sitting in peace and quiet, but the other half is when I get out I feel like my batteries are recharged. A simple shower doesn't do that, and trying to take a bath in a regular bathtub is kind of undignified and lacking. This walk-in tub even has a nice ledge behind the seat. Sometimes the cat hops up on the ledge to sleep on while I sit in the tub. For the sake of an impartial review I'm trying to think of one unpleasant thing to say but I'm really having a hard time thinking of one. Yes, these are expensive but before I made this purchase I spent 4 years visiting showrooms, doing online research, attending trade shows, going through Consumer Reports magazine articles, and talking to neighbors that had bought one. I really took my time and did my research, no impulse buy here. The short of it is that Shugarman's was easily the #1 choice for San Diego. Yes, there were other San Diego installers but they weren't even close to what Shugarman does. Our #2 choice was some company in Colorado, not even these other locals. Shugarman's is really the only way to go if you're looking for a tub in San Diego. Ultimately you're going to pay the same price either way. You can do it at once and have it professionally installed, or you can have it done by one of the cheaper guys, only to spend time repairing it over the years. No thanks. Let's just do it at once and never look back. Also, their price was on par with the industry. They're also the only company that does it all themselves. You don't have to be a project manager and call for different contractors ( drywall, electrical, etc. ) Shugarman's handles it all, you pay one price and they coordinate it all to happen over one or two days, tops. We had special requirements that made us a 3-day install, but Chreen and her crew were so good, they did it in just two days with no mistakes. Everything looks so professional. I'm so glad we didn't go with any of the other companies whose showrooms we visited. I saw things with those other guys that gave me doubts, but didn't have that same feeling with Shugarman's; no red flags whatsoever. I wish I could invite everyone over to just sit in it and experience it, but once I'm done with this review I'm probably going to get in the tub and drift off to sleep, so no, go get your own” From J.V My wife and I are so unbelievably glad we went with Shugarman. They have earned their stellar reputation and our experience is just another example of that. Our neighbor’s bathroom above us sprung a leak our whole bathroom had to be demoed down to the studs. The photos show what the bath/shower combo looked like compared to the incredible upgrade we were able to make. You won’t regret going with them at all. More details of our whole experience below: Consultation Process: We met with around 7 different contractors to get estimates for our bathroom and got quoted anywhere from $10k to $30k. All the contractors said they would install everything but gave no guarantee or warranty for issues after and we'd have to buy the fixtures ourselves. When Sean came we weren't expecting a literal power point presentation and obviously you can't help but feel like it's a bit of a hard sell. Regardless, he was extremely helpful, patient, and took his time to answer all our questions. The main selling points for us were: 1. Moving away from tile and grout (they have options that achieve the same aesthetic if you want it), 2. The fact they also sourced the fixtures for us and that those came with additional warranty, 3. That they stood by their service and would make additional repairs and corrections if anything went wrong at no extra charge—a huge selling point for us that they actually stayed true to (mentioned below) We went through the samples and more or less figured out what we wanted which got us a price quote then and there. One that wouldn’t fluctuate unlike what other contractors had said. Since this wasn’t your usual tile/grout situation though we decided to go to the showroom and Sean even opened it for us on his off day since that was the earliest we could go. It made a huge difference seeing everything in person—even changed our original design choices—and solidified that we wanted to go with Shugarman. Installation Process: Shugarman was responsive to all questions and excellent at communicating every step of the way. Ivan was our installer and single-handedly installed everything in just 2 days. The whole time he would come out to keep us updated on his progress, double-check the positioning and placement of each piece, and ensure everything was done right. Super impressed by his skill and workmanship. As part of our bathroom renovation we did the shower first meaning the shower glass panel would be the last thing to be installed. Again, Shugarman was flexible, accommodating, and able to work with our other contractors to install it at the ideal time for us. Issue Correction: As mentioned above, our whole bathroom had been demoed and Shugarman only does shower/bath installation. Once our contractors finished fixing everything up, adding drywall, plastering, etc. it became apparent the shower ceiling was a bit higher because our bathroom has double drywall panels and this had been missed. We contacted Shugarman about it, they sent someone to assess the issue and they agreed to fix it free of charge. Not only that, but their solution to adding more drywall and brining the shower ceiling down was done with such precision that it didn’t do any damage to the newly plastered walls. Literally not even a scuff. Not only that but while he was there, Ivan noticed the caulking installed by a different contractor breaking around the shower and fixed it immediately. Post-Installation: I absolutely love the new shower, everything feels top quality, runs perfectly, and it’s extremely easy to clean compared to what I had before. Overall: Shugarman went above and beyond, did everything they said they would, acted with care, integrity, and gave us the type of customer service that just makes you feel truly at ease while dealing with all the other nonsense of renovation projects. Thank you Sean, Ivan, and the whole team, appreciate it! Powered by JazzHR 3eENYAAQlN

Job Description Labor One is Hiring Pipefitters for San Diego, CA Shipyard Job Description A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust, etc. in accordance with work item specifications. The Pipe Fitter journeyman is also responsible for providing direction to improvers and helpers as directed by the supervisor. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. Long term project Housing assistance available Per diem is available for those that qualify. Call or text (858) 717-1672 / (619)657-5507 / (713)291-4598 Office: (619)773-6155 Walk-Ins Accepted! Labor One 1625 Hoover Ave National City, CA 91950 Se Habla Español – Pipe fitters para proyecto en San Diego, CA QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive knowledge of ship construction., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes a hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job-related information such as conditions found in reports in writing that include recommended corrective action., 5. Must have a thorough knowledge of experience with P-73 joint fit-up., 6. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 7. Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting., 8. Must be able to operate and care for equipment, portable power tools, and hand tools used to accomplish assigned work., 9. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 10. Must have at least Three (3-5) years of pipefitting shipyard experience.

Job Description Labor One is hiring Journey-Level Carpenters for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:To perform this job an individual must be able to understand the full scope of work of any assigned job and successfully complete the required tasks with minimal supervision. Tasks include constructing, installing, repairing, and fabricating structures (primarily wood) to protect ship's equipment, outfitting the drydock with docking blocks, and outfitting ships in accordance with specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. High school degree or equivalent (GED), or vocational school degree. Must have six (6) years of related experience. QUALIFICATIONS, DUTIES, AND RESPONSIBILITIES -Must possess the skill sets of subordinate grades of the labor class. -Must be able to interpret and work from drawings, job specifications, instruction manuals, manufacturer's handbooks, change orders, and contract specifications. -Must possess a thorough understanding of equipment and work processes used in marine carpentry, joiner, and drydock blocking operations. -Must be able to operate and care for Carpenter Shop equipment, portable power tools, and hand tools. Layout, cut, and fabricate products from blueprints, owner specifications, and sketches. -Must be able to work with US standard and metric measurements and be able to add, subtract, multiply and divide. -Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. -Carry out instructions furnished in written, oral, or diagram form. Deal with unexpected events related to your assigned task in a professional manner. -Accountable for completion of daily work assignments including the completion and signatures to work completion and quality. -Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. Personnel are accountable for completion of daily work assignments. -Must comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) -Keep the work area clean and safe at all times, especially at the end of the shift. -Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. COMMUNICATION SKILLS The candidate must be able to read and comprehend basic instructions, short correspondence, and memos to the extent necessary to accomplish the work requirements. Must be able to interpret specifications and drawings and possess the ability to write comprehensive Condition Found Reports (CFR) describing the problem found, and corrective action required. Must be able to communicate hazardous conditions to other employees. WORK ENVIRONMENT -The work environment described are representative of those an employee will encounter while performing the essential functions of this job. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished from mechanical lifts. -The working environment in the shipyard varies from a normal office environment to outside weather conditions of precipitation, wind, extreme cold, and extreme heat and high humidity. When working inside of vessels the environment may be smoky, hot or cold, and low levels of illumination may be present. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Riggers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Description: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the knowledge, skill, and/or ability desired. The individual must have working knowledge of procedures, strong mechanical aptitude and ability, and be able to follow directions. The individual must possess experience in the trade; knowledge of ship terminology, blueprint reading, job specifications and manuals. Must be able to follow directions and work with limited supervision. Must be willing to work with and train subordinates. SAFETY Must comply with Company safety rules and OSHA standards. Must be physically and medically qualified to wear required personal protective equipment as prescribed under OSHA standards. ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Technically proficient in tasks, work processes, and equipment operation. Accountable for completion of daily work assignments including the completion and signatures for work completion and quality. Creates a working environment for compliant with quality, safety, environmental, and health regulations and policies. Thorough knowledge of equipment used in rigging operations, included but not limited to lifting and moving equipment. Knowledge of rigging testing requirements, proper set up and operation of equipment. Selects cables, pulleys, winches, blocks, and sheaves, according to weight and size of load to be moved. Attaches pulley and blocks to fixed overhead structures such as beams and ceilings with bolts and clamps. Attaches load with lifting devices such as wires, nylon straps and chains to crane hook. Gives directions to crane operator engaged in hoisting and moving loads to ensure safety of workers and material handled. Sets up cranes hoisting equipment. Safe handling of anchors and chains. Lowers, handles and tests lifeboats. Tests ships cranes using various rigging. Ability to interpret all crane load charts and blueprints. Ability to work any assigned shift and ability to work assigned overtime. May be assigned tasks outside craft as required. Must comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be business like and free of bias, prejudice, and harassment EDUCATION and/or EXPERIENCE Must complete practical demonstration of skills listed above. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations before customers, clients, or employees of organization. MATHEMATICAL SKILLS The ability to add, subtract, multiply, and divide all units of measure, whole numbers, common fractions, and decimals in U.S. and metric conversions. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems that may arise in certain situations. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. Specific requirements include the following: 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Demonstrate the ability to bend, squat crouch, crawl and kneel., 4. Demonstrate the ability to climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Perform prolonged standing (2-3 hours)., 6. Able to work at a variety of levels (ex. Waist, eye, above head)., 7. Demonstrate the ability to safely and appropriately use required tools and equipment., 8. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles., 9. Posses sufficient handgrip and coordination to carry and operate tools and equipment., 10. Ability to utilize personal protective equipment (hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards., 11. Ability to withstand extreme temperatures (cold and hot)., 12. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 13. Able to respond to verbal and audible sounds/commands., 14. Able to utilize adequate visual skills., 15. Ability to work at heights above 12' while working from ladders, scaffolding and/or manlifts., 16. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 17. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 18. Ability to turn head from side to side and about on the vertical axis., 18. Ability to turn body at the waist from side to side and about the vertical axis. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the environment varies from normal office environment to wet and/or humid conditions, outside weather conditions, extreme cold, and extreme heat. The employee is occasionally exposed to moving mechanical parts and high places. The noise level in the shipyard environment is usually loud; office environment is usually low to moderate. The wearing of appropriate personal protective equipment mitigates risks associated with these conditions and is mandatory. 2nd Shift 40 Hrs. per week/ OT per approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionLabor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd shift only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Structural Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information to the supervisor., 5. Must understand SMAW, FCAW, and GMAW., 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal), • FCAW Full Penetration weld with permanent backing (ceramic and metal), • GMAW Full Penetration weld with permanent backing (ceramic and metal) 7. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals., 8. Must possess a working knowledge of welding equipment and work processes used in marine welding., 9. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 10. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals., 11. Must understand the US customary and metric measurement system., 12. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks., 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. ., 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 4. Work shifts and overtime as assigned., 5. Be accountable for completion of daily work assignments. 6. Comply with OSHA standards and shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description TrellisWare launched in 2000 with an innovative culture striving to push technological boundaries in the area of wireless communications. We are now a worldwide leader in highly advanced algorithms, waveforms, and communications systems that range from small form factor radio products to fully integrated solutions. At TrellisWare, we connect passion with purpose and together we make an impact- on our careers, our company, and the world. And you can too. If you love to innovate and collaborate in a dynamic environment where boundaries are being pushed, you belong at TrellisWare. Where the opportunity to serve is not a challenge but a gift. Where you're never going alone. Because there's too much at stake to go solo. Our people are our primary asset, and we believe that strong, cohesive teams are the key to leveraging brilliant individual contributions to even greater achievements. The Engineering Team is seeking a Mechanical Engineering Manager. You would be responsible for leading a team of Mechanical Engineers as they conceive, develop, produce, and maintain radio products, mechanical solutions for handheld tactical radios, accessories, and other communications equipment through all stages of their lifecycle. This position is responsible for the leadership and management of TrellisWare's internal mechanical engineering team as well as outside design services such as industrial design. It oversees all mechanical engineering activities that guide and support new products through concept, design, production, and end of life. The team's goals include the full lifecycle of mechanical design, Industrial design, rapid prototyping, EMI, and environmental testing. TrellisWare Managers are responsible for building strong, cohesive teams by hiring top-tier talent, developing key skills within their teams, and fostering a culture of ownership and accountability within a positive, supportive, and flexible environment. They inspire execution amongst their teams and role model TrellisWare's core values of delivering excellence, empowering people, and pushing boundaries. The essential duties and responsibilities include: • Provide leadership, mentorship, and expertise to the Mechanical Team., • Take ownership of the mechanical design of radio products and accessories., • Define, derive, and document mechanical system requirements., • Explore feasibility and applicability of new technologies, materials, processes to add to our mechanical design toolkit on both new and existing designs., • Oversee creation and release of fabrication and assembly drawings., • Creates development plans to forecast resource requirements (labor and material) through product release as well as estimation of product unit cost. Actively manages team to drive execution to the plan. Actively maintains plan to reflect actual execution., • Design, document, and execute mechanical engineering development processes., • Oversee creation and release of assembly drawings., • Manage external vendors, including industrial design firms, rapid prototype vendors, and full production vendors., • Provide functional management to the mechanical engineering team., • Provide coaching and mentoring to junior team-members., • Plan and execute conceptual and detailed development efforts., • Define and develop current and future competencies required by team members in order to maintain TrellisWare's competitive advantage and build individual and organizational capabilities., • Develops and implements strategies for cross-team and cross-department communication., • Inspire execution according to TrellisWare values (delivering excellence, empowering people and pushing boundaries)., • Support TrellisWare development processes and continuously improve them., • Establishes group mission and goals that are aligned with organizational vision, mission, values, and strategy., • Hires, engages, and retains the best people., • Clarifies goals and expectations for teams performance (removes obstacles and provides necessary resources and feedback) in order to achieve agreed targets and results, and synergistically supports departmental success., • Defines and develops current and future competencies required by team members in order to maintain our competitive advantage and build individual and organizational capabilities., • Develops relationships with team members built on trust and respect., • Bachelor's degree in mechanical engineering or related field of study required. Master's degree a plus., • At least 10 years of applicable product development and manufacturing engineering experience for high technology electronics/communication products., • Experience designing portable, rugged devices that require balance between ruggedness, size/weight, and recurring cost. Experience with radios and/or DoD is a plus., • Understand various material (metal, plastic), fabrication processes (CNC machining, casting, molding, injection etc) and their cost/performance tradeoffs, • Experience with electro-mechanical design considerations., • Experience interfacing with Industrial Designers is a requirement. Personal Industrial Design skills are a plus., • Ability to manage external vendors, including industrial design firms, rapid prototype vendors, and full production vendors., • Understand low volume, medium volume, and high-volume product design considerations., • Design for manufacturing/Concurrent Engineering experiences., • Experience in using Solidworks and/or other 3D CAD software., • Expertise in thermal modeling and thermal design considerations., • Ability to foster a culture of hard work, trust, and respect that is consistent with company values., • Ability to renegotiate team commitments and manage customer expectations as priorities change., • Sound business acumen and advocate for continuous improvement of processes and procedures., • Strong interpersonal skills and emotional intelligence., • Ability to mentor and coach junior employees in professional development and process improvement., • Ability to evaluate performance against defined goals and effectively communicate areas of growth/improvement for direct reports., • Strong analytical and problem-solving skills., • Effective execution and decision making., • Champion of change and promotes innovation., • Able to frequently sit, stand, walk, use hands to fingers, handle or feel, reach within hands and arm's length, stoop, kneel, and crouch, talk and hear., • Regularly required to sit for extended periods of time; frequently required to use office equipment such as PC, printer, telephone, etc., • Able to regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Disclaimer - The above statements are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Nothing in the job description restricts the company's right to change, assign, or reassign duties and responsibilities at any time for any reason. TrellisWare Technologies pays competitively according to the market in an individual's geographic location, in addition to their qualifications and experience. The posted range is annually and for individuals located in the San Diego, CA area. San Diego, California Pay Range$180,000—$210,000 USD Check out the Careers page for more information about working at TrellisWare Technologies.

Job Description We are looking for a detail oriented full-time legal secretary or paralegal with three+ years legal experience. Candidate must have strong computer skills, exceptional organizational skills, including the ability to multi-task, strong civil litigation knowledge and corporate transactional skills, excellent calendaring, and attention to detail. We are looking for someone with a great attitude, works well on a team, is proactive, is not afraid to learn new procedures and/or programs, and that likes being busy. SKILLS REQUIRED: • Ability to handle a heavy workload including document production, formatting and editing, • Take ownership in management of electronic calendaring for attorneys' appearances and deadlines to ensure deadlines are met and attorneys are able to be as productive as possible. This includes manually calculating dates and knowing how to determine what they are, • Excellent communication skills, both verbal and written, • Multi-task in a fast-paced environment without compromising quality, • Immediate working knowledge of computer programs: Word, Excel, Outlook, Adobe and internet, with ability to follow firm's style and procedures, • Knowledge of California Courts and Federal rules and/or ability to know where to look to find them, • Experience with e-filing in Superior and Federal Courts, • Flexibility and team member mentality to be able to cover for other secretaries as the need arises QUALIFICATIONS • Three years or more experience in a law firm, • Experience using Microsoft products in a professional setting, • Civil litigation experience required, • California Courts preferred, • Appellate experience helpful, but not required, • Labor & Employment experience helpful, but not required, • Paralegal certificate helpful, but not required We provide a great work environment where staff and attorneys all work together to provide the best service to our clients and produce quality work product. We offer competitive salary and benefits package, including medical, dental and life insurance (100% PAID for the employee), 401k, profit sharing, sick and vacation days and PAID parking. We have a gym on site. Our office is stocked with snacks, water and a latté & cappuccino machine. We offer MCLE classes to our attorneys AND our staff. We host several social events outside the office (family picnics, staff appreciation team building events, holiday parties, bar passage happy hours, etc.). We have a hard working group of individuals who we strive to help them love their job. If you meet the above qualifications, please submit resume and cover letter to . Visit for more information.

Job DescriptionJob Title: Blast, Paint & General Services Helper Job Description We are seeking enthusiastic and skilled individuals to join our team as Blast, Paint & General Services Helpers. In this role, you will assist skilled painters in preparing wood and metal surfaces, removing contaminants, and masking areas not to be painted. You will help in painting parts, equipment, and structural surfaces both inside and outside ships and shipyard buildings. Your duties will also include mixing materials according to Product Data Sheets, inspecting prepped and painted areas, and performing touch-up work as needed. Responsibilities • Assist skilled painters in cleaning and preparing surfaces for painting., • Remove dirt, grease, rust, scale, and other contaminants., • Mask and tape areas not requiring paint., • Paint parts, equipment, and structural surfaces on ships and shipyard buildings., • Mix materials in accordance with Product Data Sheets., • Inspect prepped and painted areas and perform touch-up work as needed., • Set up spray equipment, including pneumatic, conventional, and airless pumps., • Operate HVLP spray gun and five-gallon conventional spray pot., • Perform non-skid applications using phenolic roll., • Dismantle scaffolding of multiple types., • Clean tanks and perform general shipyard cleanup., • Inspect and sort scaffolding materials., • Operate high-reach equipment and power tools., • Move furniture and other equipment as needed., • Assist with tasks related to painting, blasting, carpentry, and waysman duties.Essential Skills, • Experience in painting and paint preparation., • Ability to handle hand tools effectively., • Knowledge of basic painting applications.Additional Skills & Qualifications, • Previous shipyard experience is preferred., • Must be flexible to work all shifts., • Must provide own tools.Why Work Here? Join a company recognized for its long-term stability and strategic importance in national defense. Work on high-impact projects contributing to the U.S. Navy's mission-critical operations. Be part of a secure and expanding work environment known for innovation and reliability in shipbuilding. Work Environment Work will support the T-AO New Construction Program, involving projects for the U.S. Navy's fleet oiler program. The role includes working on vessels designed for fuel transfer to carrier strike groups at sea, featuring advanced designs for safety and efficiency. The job requires flexibility to work all shifts and involves tasks in various shipyard settings. Job Type & Location This is a Contract to Hire position based out of San Diego, CA. Pay and Benefits The pay range for this position is $18.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description TIG Welder - 1st Shift - El Cajon Job Description This role focuses on performing high-quality TIG and MIG welding on a variety of assemblies, supporting a journeyman welder with fit-up and fabrication work, and contributing to the accurate and efficient completion of fabrication projects. You will work from blueprints, use fixtures, operate hand tools such as grinders, and document your work to ensure traceability and quality compliance. Responsibilities • Perform TIG and MIG welding on a wide range of assemblies in accordance with drawings and specifications., • Assist a journeyman welder with fit-up and fabrication tasks, ensuring proper alignment and preparation of parts prior to welding., • Read and interpret blueprints and weld symbols to determine weld locations, techniques, and sequence., • Use fixtures and jigs to position and secure workpieces during welding and fabrication., • Operate hand grinders and other basic fabrication tools to clean, prep, and finish welds and components., • Weld exotic materials, including various alloys, Inconel, and 300/400 series stainless steel, following established procedures., • Perform welds on different material thicknesses such as .032, .060, .090, and .188 inches, adjusting technique as needed., • Set up welding machines, including selecting appropriate amperage, settings, and parameters for each job., • Apply back-gouging or back-gap welding techniques when required by the job specifications., • Fabricate parts under supervision, ensuring dimensional accuracy and adherence to drawings., • Document work performed, including type of rod or filler used, type of weld, and other relevant process details., • Identify materials correctly and record them on travelers or job documentation to maintain accurate traceability., • Proficiency in TIG (GTAW) and MIG (GMAW) welding processes on assemblies., • Ability to read and interpret blueprints, weld symbols, and fabrication drawings., • Hands-on experience using fixtures and jigs to support accurate fit-up and welding., • Capability to weld exotic materials, including alloys, Inconel, and 300/400 series stainless steel., • Skill in welding a range of material thicknesses such as .032, .060, .090, and .188 inches., • Experience setting up welding machines, including adjusting amperage and other parameters., • Competence operating hand grinders and basic fabrication tools safely and effectively., • Ability to fabricate parts under supervision while following detailed instructions., • Attention to detail in documenting welding work, including filler material, weld type, and process notes., • Skill in identifying materials and recording them accurately on travelers or job paperwork., • Ownership of a personal welding hood suitable for TIG and MIG operations., • Familiarity with back-gap welding techniques and their application in production work., • Comfort working with exotic alloys and stainless steels in a fabrication environment., • Strong organizational skills to maintain clear, accurate records of work performed. You will join a hands-on, production-focused environment where craftsmanship and precision welding are highly valued. The role offers the opportunity to work closely with experienced welders, gain exposure to exotic materials and advanced welding techniques, and expand your fabrication skills under guidance. The team-oriented culture encourages learning, flexibility, and taking on a variety of tasks, helping you grow your capabilities and experience in a supportive setting. Work Environment This is an on-site role based in El Cajon, CA, with work performed on the shop floor four days per week. You will work in a fabrication and welding environment using TIG and MIG welding machines, fixtures, hand grinders, and related shop equipment. The setting involves working around metals, welding arcs, grinding operations, and standard fabrication tools, requiring appropriate personal protective equipment such as a welding hood and safety gear. Work includes handling various material thicknesses and exotic alloys, and may involve moving between different stations or tasks depending on project needs. Job Type & Location This is a Contract to Hire position based out of El Cajon, CA. Pay and Benefits The pay range for this position is $30.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Labor One is Structural Welders for Ship Repair project in San Diego, California. (4) years of welding experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Description: This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information to the supervisor., 5. Must understand SMAW, FCAW, and GMAW., 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal), • FCAW Full Penetration weld with permanent backing (ceramic and metal), • GMAW Full Penetration weld with permanent backing (ceramic and metal) 7. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals., 8. Must possess a working knowledge of welding equipment and work processes used in marine welding., 9. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 10. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals., 11. Must understand the US customary and metric measurement system., 12. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks., 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. ., 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 4. Work shifts and overtime as assigned., 5. Be accountable for completion of daily work assignments.6. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 3rd Shift 40 hours a week/OT on approval Testing 2G/3G Flux Core (2 plates Only) Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionCompany Description Fairmont Hotels & Resorts Join a dynamic team and be part of a network of 90 spectacular properties, and 34 more in the pipeline, in 30 countries around the globe. Our properties are located from the beaches of Hawaii to the unspoiled national parks of Canada, to the heart of London, to the deserts of the United Arab Emirates. About Fairmont Grand Del Mar Breathe deeply, dream wildly, and discover a soulful sanctuary where finding yourself comes naturally. Magic sits around every corner and within every conversation. It enchants through the charm of Los Peñasquitos Canyon and the sunshine of San Diego. It’s where classic meets cool, the fine unwinds into fun and inspiration leads to immersion. Bask in the San Diego sunshine and enjoy our five-star setting at Fairmont Grand Del Mar. Immersed in nature, the resort hosts 249 elegantly appointed guestrooms and suites, an 18-hole private Tom Fazio-designed golf course, a five-star spa and offers two dozen weekly outdoor activities across the 400 acres of dramatic canyon scenery including yoga, meditation and archery. The Grand includes six different dining venues, including San Diego’s only three-Michelin starred restaurant, Addison. Growth and advancement are not only accessible but actively encouraged. We promote a balanced life for our colleagues and continually seek new ways to enhance our environment and support our beautiful home of San Diego. About the Application Process: At Fairmont, we want to bring out your highest potential. Shortly after applying, you will receive an email from our partner Assess First prompting you to create a profile and complete a questionnaire. This is a mandatory step for your candidacy to be considered as it enables us to explore your compatibility with this role and our culture of luxury excellence. What is in it for you: • Employee benefit card offering discounted rates in Accor worldwide for you and your family, • Learning programs through our Academies designed to sharpen your skills, • Ability to make a difference through our Corporate Social Responsibility activities, • Career development opportunities with national and international promotion opportunities. The sky is your limit., • Salary Range $90,000 to $100,000 USDJob Description Responsibilities: Oversee the operations of the Front Office, Guest Relations and PBX staffs. 30% Train and coach all colleagues and managers on established systems. Assist in new-hire and ongoing training. Direct and assist staff, ensuring that all work is completed effectively. Perform duties of Front Desk Agent, Guest Relations Agent and PBX Operator if required. 30% Ensure all reports and projects assigned performed and completed as directed. Maintain budgets in all departments with regards to labor, expenses and revenues. 20 % Address any guest opportunities, problems and/or requests as they arise in a very friendly and professional manner. Ensure that all matters are resolved or addressed with the proper department head so that they can be resolved. 20% Ensure appropriate follow up with guests and visitors, documenting appropriately. • In addition, this position may be required to perform a combination of the following supportive functions, with the percentage of time performing each function to be solely determined by the manager based upon the particular requirements of the Resort:, • Register and/or check out guests, • Operate/handle telephone lines., • Additional duties as necessary and assigned., • Regular attendance is essential to the successful performance of this position., • Due to the fluctuation in business levels in the hospitality industry, employees may be required to work varying schedules to reflect the business needs of the Resort, this may include overnight shifts, weekends and holidays. In addition, attendance is required at all scheduled training sessions and meetings., • All colleagues must maintain a neat, clean and well-groomed appearance per The Grand Del Mar grooming standards., • Upon employment, all employees are required to fully comply with company rules and regulations for the safe and effective operation of the Resort’s facilities. Employees who violate Resort rules and regulations will be subject to disciplinary action, up to and including termination of employment.Qualifications Qualifications: • One year hotel Front Office experience plus one year of supervisory/management experience required. Management experience preferred., • High school or equivalent education required. Bachelor’s Degree preferred., • The individual must possess the following knowledge, skills and abilities and be able to explain and demonstrate that he or she can perform the essential functions of the job, with or without reasonable accommodation, using some other combination of knowledge, skills, and abilities., • Must be able to speak, read, write and understand the primary language(s) used in the workplace., • Must be able to read and write to facilitate the communication process., • Requires good communication skills, both verbal and written., • Must possess basic computational ability., • Must possess basic computer skills., • Ability to supervise subordinate staff, including, but not limited to, assignment of duties, evaluating service and taking disciplinary action when necessary., • Ability to solve problems and make rational decisions., • Knowledge of Resort operations, its services, and facilities., • Most work tasks are performed indoors. Temperature generally is moderate and controlled by Resort environmental systems., • Position requires walking and giving direction most of the working day; must be able to stand and exert well-paced mobility for up to 4 hours in length. Length of time of these tasks may vary from day to day and task to task., • Must be able to exert well-paced ability to reach different outlets and other departments of the Resort on a timely basis., • Must be able to exert well-paced ability in limited space., • Must be able to bend, stoop, squat and stretch to fulfill cleaning tasks., • Must be able to lift up to 15 lbs. on a regular and continuing basis., • Requires grasping, writing, standing, sitting, walking, repetitive motions, bending, climbing, listening and hearing ability and visual acuity., • Talking and hearing occur continuously in the process of communicating with guests, supervisors and subordinates., • Vision occurs continuously with the most common visual functions being those of near vision and depth perception., • Requires manual dexterity to use and operate all necessary equipment., • Must have finger dexterity to be able to operate office equipment such as computers, printers, 10-key adding machine, electric typewriter, multi-line touch tone phone, filing cabinets, FAX machines, photocopiers, dolly and other office equipment as needed. Additional Information Employee Benefits: Join our team and enjoy a range of exclusive colleague perks, including complimentary upgrades, extended stays, discounted stays across Fairmont & Raffles properties, special dining and wellness discounts, and added luxuries to enhance your experience. We believe in taking care of our team, ensuring that your hard work is rewarded with exceptional benefits. Add any other benefits relevant to your property. Our Values Respect: We value the needs, ideas and individuality of others. We treat everyone with fairness and dignity. Excellence: We make genuine connections, and we cherish every opportunity to make the people around us feel special. Belonging: We celebrate our differences. We support each other and we always stand together. Empowerment: We have authority to take initiative and anticipate moments that create unforgettable experiences. Integrity: We build trust through mutual respect and being authentic. Diversity & Inclusion Fairmont is committed to creating an inclusive environment where diverse talent thrives. We welcome candidates from all backgrounds to join our team.

Job Description Pay Range $30 - $36 per hour About Us: One of the reasons why we are the nation’s leading parking management expert is because we recognize that “people” are what makes our company successful. It is this recognition that serves as the foundation and building block for our continued growth and success. Having been in business for over 75+ years, we understand what it means to earn “Every Thank You,” which is treating our clients, partners, guests, and team members with utmost respect and courtesy. As one of the largest privately held management companies, we have the experience, passion, and the know-how to withstand the test of time and to disrupt the new marketplace with exploding new technologies. Culture: We have a strong, distinctive culture – a culture that is heavily influenced by a shared vision, style, and values. Our company values are the glue that binds our business, clients, and team members. There are some common traits that contribute to our unique culture. Clear values, caring, loyalty, humility, and a deep commitment to community are just a few of them. These characteristics often steer our decision-making and define the way we treat our customers, clients, suppliers, and team members. We guard these values and attributes fiercely. About the Position: You will serve as the technical and administrative right-hand to the Director of Payroll. This is a project-heavy role for a self-starter who works well with minimal supervision. While a separate supervisor manages daily processing, you will focus on compliance, tax reconciliation, and the implementation of UKG Dimensions/WFM Pro. Key Responsibilities: • System Mapping “Manage behind the scenes “; mapping for union contracts (CBAs) and state laws. Set up and test accrual rules and timekeeping configurations., • Implementation Support: Assist with the transition to UKG Dimensions/WFM Pro. Help with system setup, data testing, and troubleshooting to ensure a smooth Tax Year-End: Perform regular multi-state tax reconciliations. Assist with year-end W-2 processing and tax audits., • Auditing: Use UKG Business Intelligence to audit tip reporting, PTO accruals, and minimum wage compliance., • Director Backup: Manage GL reporting and posting. Act as the Director’s primary backup for high-level projects and department coverage., • Labor Law: Ensure compliance with California and multi-state requirements, including weighted average overtime and meal premiums., • Process Maintenance: Research new payroll laws and update system settings to keep the company compliant without daily reminders. About YOU: The role requires deep expertise in payroll systems configuration, multi-state tax reconciliation, and labor law interpretation, particularly California regulations. Acting as a key resource for high-level initiatives, you will manage complex system mapping for union contracts and statutory requirements, conducts audits using UKG Business Intelligence, oversees GL reporting and posting, and provide leadership continuity as the Director’s primary backup. Additionally, the position proactively monitors legislative updates, translating new payroll laws into system adjustments to maintain ongoing compliance and operational efficiency. • Bachelor’s degree preferred., • 3–5 years of payroll experience, ideally in a large-scale environment (5,000+ employees)., • Must have UKG pro experience., • Background in payroll tax reconciliation and mapping CBAs into payroll software., • Experience with GL reporting and journal entries is a plus., • Self-starter capable of hitting project deadlines with very little oversight., • Intermediate Excel skills (Lookups, pivot tables) for data auditing., • What We Can Offer You for All Your Hard Work:, • Medical, dental, vision, life insurance coverage, • Flexible Spending Accounts, • 401k, • Vacation/Sick, • Holiday, • Discount programs Ace Parking is committed to the full inclusion of all qualified individuals. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment, Ace Parking will ensure that persons with disabilities are provided reasonable accommodation. If reasonable accommodation is needed, please email: describing the accommodation.

Job Description Labor One is hiring Journey-Level Outside Machinists for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on maritime vessels including US Navy, Military Sealift Command, and commercial. The work occurs in various stages of repair and modernization and requiring the ability to operate a wide variety of tools and machinery, and the ability to read and comprehend specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to work from Process Control Procedures (PCP)., 6. Must be able to use precision measurement tools., 7. Must be able to effectively confer job related information to the structural supervisor and small groups, and provide technical guidance to Helpers and Improvers., 8. Must be able to interpret drawings, sketches, tech manuals, and user manuals to the extent necessary to remove, repair, and install equipment., 9. Must understand the NAVSEA standard items, especially 009-04 for tests, inspections, and check points; 009-23 for interferences; and 009-24 for blanking and match marks., 10. Must have a comprehensive understanding of Lock-out / Tag-out procedures., 11. Must understand laser alignment., 12. Must understand reverse indicator alignment procedures., 13. Must understand the proper and safe use and operation of the hand and power tools required to accomplish the work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system and the metric system., 15. Six (6) years of machinist experience, two (2) of which in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the supervisor. 3. Work shifts and overtime as assigned., 3. Keep the work area clean and safe at all times, especially at the end of the shift., 4. Complete work assignments as scheduled and provide status of unfinished work for shift turnover., 5. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 6. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which requires that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that personnel may encounter every day in the course of performing work on ships, piers, docks. While performing the duties of this position the employee is regularly required to: stand; walk; use hands and fingers to handle directly or work from touch; reach out with arms; climb; stoop; kneel; crouch; crawl; and communicate in a loud environment. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: Candidates may be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionLabor One is hiring Journey-Level Pipefitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (956)382-2631 (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Position Overview: As a Pipefitter Journeyperson, you will be responsible for the layout, fabrication, installation, repair, and testing of various marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, and Engine Exhaust systems. You will work according to specifications, NAVSEA/Military standards, and other regulatory standards like ABS and Military Sealift Command. Key Responsibilities: -Remove, repair, target, fabricate, and install marine piping systems in accordance with regulatory standards. -Use equipment such as table saws, pipe threading machines, bending machines (power and hand-operated), drill presses, and brazing equipment. -Perform blanking and pressure testing of tanks (structural boundary testing). -Interpret and follow instructions, drawings, and work item specifications. -Provide direction and guidance to helpers and improvers as assigned by the supervisor. Qualifications & Experience: -5-10 years of experience in pipefitting, with at least 6 years of experience in maritime pipefitting. -Strong knowledge of P-73 joint fit-up and Silver Brazing theory. Ability to certify in: -MT Braze (B-1) -MT Braze (B-2) -Thorough understanding of marine pipe fabrication, repair processes, and targeting. -Capable of interpreting drawings, specifications, and Navy/MSC/ABS standard items and manuals. -Proficiency in basic math (addition, subtraction, multiplication, division) and familiarity with both U.S. customary and metric measurement systems. -Physically and medically capable of wearing all required PPE, including hard hats, respirators, safety harnesses, and other safety gear as per OSHA standards. Work Environment: You will work in shipyards, aboard vessels, or industrial settings, performing pipefitting tasks on complex marine systems. The role demands precision, adherence to safety standards, and the ability to collaborate effectively with a team. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Position: Associate Attorney Location: California Position Overview: If you possess a strong work ethic and want to work in our California practice group, apply here! If you are looking for a higher job title, we are open to hiring attorneys as Senior Associates, Of Counsel, and Partners. We are hiring for our Labor and Employment, General Liability, and Mass Tort groups! Job Requirements: • This position requires a California bar license in good standing, • A minimum of JD from an ABA approved law school, • A minimum of 2+ years of civil defense litigation experience, preferably in General Liability, Mass Tort, Toxic Tort, Construction Defect, Labor and Employment, and/or any insurance defense litigation., • Previous experience should include managing up to 20 cases at once, taking and defending depositions, appearance in court, motion, and discovery drafting; mediation and trial experience a huge plus; experience mentoring junior Associates a huge plus, • Computer skills: Has basic knowledge of computer operation, internet software, spreadsheet software and word processing software; the use of Microsoft products is preferred. Has the ability to type and operate office equipment., • Be self-motivated and a self-starter, work well independently, and possess strong client communication skills, • Oral Communication: Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; responds well to questions; participates in meetings when required, • Written Communication: Writes clearly and informatively; edits work for spelling and grammar; varies writing style to meet needs; presents numerical data effectively; able to read and interpret written information, • Temperament: Ability to work with little supervision; prioritizes and anticipates work needs; works well under occasional periods of pressure and short deadlines., • Draft/review and respond to petitions/complaints, motions, and written discovery, • Attend hearings and meetings with clients when requested, • Prepare for and attend depositions, • Assist with preparation for and/or participate in mediation and trial, • Must be willing and able to bill, • One-on-one mentorship and training by Partners, • Salary range depending on depth and years of experience ($130k-$250k), • Quarterly bonuses based on your billable hours, • Annual performance reviews with potential for sizeable increase in salary, • Hybrid or remote work environment, • Flexible work hours, • Medical Insurance – Currently provided by Cigna Healthcare with multiple insurance plans to choose from based on your needs – partially paid for by Firm for the employee; All outpatient mental health services are free of charge with no copays, • Optional Dental & Vision Insurance, • Optional Voluntary Life and Disability Insurance, • Optional Voluntary Accident Insurance, • Optional Critical Illness Insurance, • Optional Cancer Insurance, • Optional Hospitalization Insurance, • Optional Health Savings Account, • Optional Flexible Spending Account, • 401k after one calendar year of employment, • Paid time off (PTO) to support your overall well-being, • Collegial work environment About Lydecker: Lydecker is an AV-rated full-service law firm with over 150 attorneys Nationwide! Our firm has earned a strong and positive reputation for its tenacious defense and protection of the best interests of its clients, and for obtaining optimal results. Our long-standing relationships with our clients are grounded in mutual trust and an understanding of each client’s needs and goals. Vision: Our vision at Lydecker is to be a trusted partner that redefines excellence in legal services. We envision a future where our innovative approach to client service sets new standards in the legal industry. With a relentless commitment to integrity, collaboration, and excellence, we aspire to be the first choice for clients seeking unparalleled solutions and results. Together, we will shape the future of legal practice, empowering individuals and clients to thrive in an ever-evolving world. Mission Statement: At Lydecker, our mission is simple: to exceed client expectations with efficient, strategic, and collaborative service. We are dedicated to long-term success for our clients, attorneys, and staff, fostering a culture of excellence and teamwork. Company Values: Excellence: At Lydecker, we are committed to excellence in all that we do. We strive for the highest standards of quality, professionalism, and innovation in delivering legal services. Our dedication to excellence drives us to continually improve, adapt, and exceed expectations. Integrity: Integrity is the cornerstone of our relationships, both internally and with our clients. We conduct ourselves with honesty, transparency, and ethical behavior always. Trust is paramount, and we uphold the highest standards of integrity in every interaction, decision, and action we take. Collaboration: We believe in the power of collaboration to achieve greater success. At Lydecker, we foster a culture of teamwork, respect, and support among our attorneys and staff. By working together seamlessly, leveraging diverse perspectives, and sharing knowledge, we maximize our collective talents to deliver exceptional results for our clients. Care: We take care of our people because we genuinely care about each one of them, and we believe that by fostering a culture of care, we can create a more resilient, supportive, and successful organization for all. We show that we care about our employees through employee well-being, professional growth and development, work-life balance, diversity and inclusion, and community engagement. Why Join Lydecker? We are a growing national litigation firm built on the traditional values of hard work and taking care of our clients. Diverse and Inclusive Ownership & Administrative Leadership. We take pride in having a significant portion of our attorneys and administrative leadership being a part of diverse groups. Many of our Firm's Shareholders and Administrative Leadership Team self-identify as historically underrepresented groups such as people of color, women, persons with disabilities, and/or LGBTQIA+. Career Advancement Prospects. We are sprinting toward growth and invite you to sprint alongside us! Experience swift career progression, hands-on litigation learning, and abundant opportunities for professional development with mentoring from more senior attorneys in small, collaborative practice groups. Flexible Work-Life Integration. We value your need to have a flexible schedule and work from home and hybrid work opportunities. Enjoy work life balance at our firm. Extensive Perks. Competitive salaries, quarterly bonus opportunities based on billable hours, paid time off, top-notch medical insurance with no copay for outpatient mental health access, paid parking or commuter benefits, and a robust 401k plan. To learn more about Lydecker LLP, please visit our website at or visit LinkedIn #LydeckerCareers #LydeckerLife #LydeckerAuthenticDiversity Lydecker LLP is an Equal Opportunity Employer and does not discriminate based on race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability. Lydecker is not currently accepting resumes or inquiries from outside recruiters or agencies.

Job Description Building Engineer $40/hr 7am - 4pm M-F Downtown San Diego Description Common Area & Amenity Maintenance for a high rise building in downtown San Diego. • Perform routine inspections of lobbies, hallways, elevators, stairwells, parking areas, fitness centers, pool/spa areas, rooftop decks, and other shared spaces., • Complete light maintenance tasks such as replacing light bulbs, tightening fixtures, clearing minor clogs, adjusting doors, and basic equipment upkeep., • Identify when repairs or troubleshooting should be outsourced and contact appropriate vendors., • Schedule, coordinate, and oversee vendor work, ensuring quality and adherence to timelines., • Conduct basic monitoring of mechanical rooms, electrical rooms, and other building infrastructure areas., • Report irregularities or potential issues to management and vendors., • At least 2 years of building engineer, lead facilities technician, chief engineer experience with prior facilities experience required, • Experience with plumbing, carpentry, painting, electrical, and mechanical facility systems, • Experience with basic HVAC preventative maintenance Intermediate Level Job Type & Location This is a Contract to Hire position based out of San Diego, CA. Pay and Benefits The pay range for this position is $40.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionCompany Description Fairmont Hotels & Resorts Join a dynamic team and be part of a network of 90 spectacular properties, and 34 more in the pipeline, in 30 countries around the globe. Our properties are located from the beaches of Hawaii to the unspoiled national parks of Canada, to the heart of London, to the deserts of the United Arab Emirates. About Fairmont Grand Del Mar Breathe deeply, dream wildly, and discover a soulful sanctuary where finding yourself comes naturally. Magic sits around every corner and within every conversation. It enchants through the charm of Los Peñasquitos Canyon and the sunshine of San Diego. It’s where classic meets cool, the fine unwinds into fun and inspiration leads to immersion. Bask in the San Diego sunshine and enjoy our five-star setting at Fairmont Grand Del Mar. Immersed in nature, the resort hosts 249 elegantly appointed guestrooms and suites, an 18-hole private Tom Fazio-designed golf course, a five-star spa and offers two dozen weekly outdoor activities across the 400 acres of dramatic canyon scenery including yoga, meditation and archery. The Grand includes six different dining venues, including San Diego’s only three-Michelin starred restaurant, Addison. Growth and advancement are not only accessible but actively encouraged. We promote a balanced life for our colleagues and continually seek new ways to enhance our environment and support our beautiful home of San Diego. What is in it for you: • Employee benefit card offering discounted rates in Accor worldwide for you and your family, • Learning programs through our Academies designed to sharpen your skills, • Ability to make a difference through our Corporate Social Responsibility activities, • Career development opportunities with national and international promotion opportunities. The sky is your limit., • Salary Range $105,000 - $125,000 USDJob Description Reporting to the Director of Finance & Business Support, responsibilities and essential job functions include, but are not limited to the following: Purchasing • Oversee and participate in the procurement of materials, equipment, supplies and services necessary to support the Hotel, • Lead and develop purchasing team, providing training and performance management, • Supervise all procurement activities and approve purchase orders to ensure compliance with company Standard Operating Procedures, • Manage the receipt of all incoming products; including verifying products have the proper quality, proper weight, agreed upon quantity and appropriate temperature, as applicable, • Timely ensure the receipt and closure all POs through either direct action or administrative oversight, • Manage vendor set ups in both the back office system (Oracle GFS) and the Purchasing System (Birchstreet), to include proper vendor activation in both systems and interface, • Collaborate with departments to anticipate demand and coordinate purchasing activities, including short lead Banquet requirements to ensure sufficient stock, and coordinate orders with each department, • Attend BEO meetings for large groups or those with special requirements, • Act as liaison with Entegra representative (or current Group Procurement Manager) to ensure approved vendors perform per contract, property is maximizing approved vendor usage and off brand vendors and services are pushed into the current Group Procurement Manager program, as an official vendor, • Negotiate and qualify non Group Procurement Manager (currently Entegra) suppliers to ensure reasonable and appropriate to service the Hotel including facilities inspections, certificates of insurance, product specs in alignment with the standard, and other key performance metrics, and ensure maximum company benefit, • Initiate cost reductions through standardization of materials, value analysis and seek opportunities for new or improved products or services. Present to the appropriate Division/Department Heads, • Communicate temporary product substitutions or brand standard changes and perform a cost analysis, • Ensure prompt payment of invoices through expeditiously addressing pending clarification invoices, actively addressing vendor concerns and reconciling statements, daily invoice scanning to the shared services mailbox (CASD) and working closely with the A/P team, • Communicate and lead the monthly inventory process in accordance with the SOP, • Produce and distribute a daily F&B cost report and work closely with the Chef and F&B Director to perform an analysis of the cost vs. sales as per the SOP and reconcile back to the G/L., • Place liquor, beer, and wine orders as required. Work closely with TABC vendors and manage beverage invoices from order to payment and ensure 100% compliance with TABC Credit Law, as per the local SOP, • Update the purchasing system (Birchstreet) with the current monthly forecast and ensure department leaders are trained in check book management, and facilitate and track purchasing user training, • Manage user access, approval routing and Birchstreet matrix, • Maintain the contract critical date list in Contract Works and lead contract termination, renewals and negotiations, • Supervise supply areas and have working knowledge of inventory system, • Maintain productivity and labor cost goals, • Chair daily pre-shift and monthly department communications meetings, • Achieve EES objectives and develop action plans for department; including improving communications, coaching, mentoring and task accomplishment, • Follow-up on departmental health and safety standards, • Ensure all company standards and product specifications are maintained, • Comply at all times with Fairmont standards and regulations to encourage safe and efficient hotel operations, • Train and supervise Receiving Clerks and Storekeepers, • Operate in compliance with all Local, State/Provincial, and Federal laws and government regulations, • Manage and/or schedule department personnel, • Attend various property meetings and communicate relevant departmental and or purchasing updates, • Approach all encounters with guests and employees in a friendly, service-oriented manner, • Maintain high standards of personal appearance and grooming, which includes wearing the proper uniform and name tag, • Adherence to corporate standards as set forth by the brand Qualifications • Graduate of a Hotel Management, Business Program or related degree, • 3-5 years of leadership experience in purchasing, with at least 2 years in the hospitality industry – preferably for a large hotel, resort, or convention facility, • Familiar with all Local, State/Provincial, and Federal laws and government regulations – not limited to import regulations, brokers and customs, food and liquor, Health, and employment/workplace safety., • General knowledge of equipment and supplies used in a hotel environment including food and beverage products, alcoholic and non-alcoholic, • Experience with BirchStreet eProcurement/Inventory/Recipe system, • Understanding of basic accounting practices, • Experience with Microsoft Office – Word, Excel, Outlook, as well as purchasing/accounting software, and labor control software (i.e. Watson, Timesaver), • Demonstrate excellent interpersonal, organizational and administrative skills, • Frequent standing and walking throughout shift, • Frequent lifting and carrying up to:, • Frequent kneeling, pushing, pulling, lifting, • Frequent ascending or descending ladders, stairs and ramps Additional Information Employee Benefits: Join our team and enjoy a range of exclusive colleague perks, including complimentary upgrades, extended stays, discounted stays across Fairmont & Raffles properties, special dining and wellness discounts, and added luxuries to enhance your experience. We believe in taking care of our team, ensuring that your hard work is rewarded with exceptional benefits. Add any other benefits relevant to your property. Our Values Respect: We value the needs, ideas and individuality of others. We treat everyone with fairness and dignity. Excellence: We make genuine connections, and we cherish every opportunity to make the people around us feel special. Belonging: We celebrate our differences. We support each other and we always stand together. Empowerment: We have authority to take initiative and anticipate moments that create unforgettable experiences. Integrity: We build trust through mutual respect and being authentic. Diversity & Inclusion Fairmont is committed to creating an inclusive environment where diverse talent thrives. We welcome candidates from all backgrounds to join our team.

Job Description Become part of a strong service team at one of San Diego’s largest and most respected group of dealerships, which services Dalton Toyota National City, Dalton Subaru National City, and Dalton Hyundai National City. This is a great opportunity to work with an industry leader known for its friendly and welcoming environment, exceptional customer service, and large and loyal customer base. We are looking for experienced service advisors/consultants who are enthusiastic, honest, hard-working, organized, committed to great customer service, and want to be a top earner in their field. Our Service Advisors’ annual gross wages commonly range between $72,000 and $120,000 (salary plus commission) or more based on your skills. Company and Service Department Overview: Dalton Motors services Dalton Toyota National City and Dalton Subaru National City, and is located less than 20 minutes from most areas of San Diego. Founded in Guadalajara in 1945, Dalton Motors is a family owned and operated business with over 30 dealerships serving major manufacturers including Toyota and others. They are continuing the legacy of Frank Motors, an automotive and community presence since 1965. Dalton Motors has a large and well stocked parts department and a Service Development Center (SDC) dedicated to setting and reminding customers of their service appointments. We have extremely knowledgeable and experienced service advisors who are highly productive and used to working in a fast-paced, customer friendly environment. We have ongoing training for our staff, including technician and service advisor/consultant training from the manufacturer, new product on-line training, and job specific training by our in-house trainer. Our service and parts areas run very smoothly in large part due to our solid processes and trained, skilled staff, many of whom have been at our stores for twenty years or more. Some of what you will do: • Greet customers and create a welcoming and friendly environment, • Perform a walk around of the customers vehicle with the customer, • Update Customer Information, • Work with the customer to evaluate their service needs, review past service history, and make recommendations for repairs, • Check for open Recalls, • Instill confidence in the customer by completing accurate estimates for parts and labor, • Partner with service technicians to ensure work is completed and done on time, • Build trust in customers by checking up on repairs, explaining completed work, and ensuring customer satisfaction, • Continue to develop your skills through training and experience and take your career to new heights! What we are looking for: Minimum of 5 years automotive service advisor experience. • Minimum of a high school diploma or equivalent, • Valid driver's license, • At least two years of service advising experience, • Excellent communication skills, both written and verbally, • Outstanding customer service skills, • Proficient Computer Skills, • Professional work ethic and high integrity, • Ability to work as a team and/or independently, • Full Benefits 1st of the month after 60 days of employment including Health, Vision, & Dental Insurance, • 401k plan, • Paid vacation, • Paid manufacturer product training, • Employee Assistance Program, • Employee vehicle purchase program, • Advancement opportunities Supplemental pay types: • Driver's License

Job Description Associate Attorney – Environmental & Water Law Join a growing and exciting environmental and water law practice in Sacramento that focuses on public agencies, agricultural interests, and tribal rights for advisory, transactional, and litigation services. Specific skills sought are: • At least three years of experience with environmental and/or water law matters for public and/or private clients;, • Experience with public sector clients such as cities, counties, and special districts is preferred with demonstrable knowledge of the Brown Act, Public Records Act, and Conflicts of Interests;, • Experience with assisting in preparation of discovery and pleadings for litigation or adversarial proceedings at state administrative agencies such as the State Water Resources Control Board;, • Excellent legal research and analysis skills and demonstrated ability to perform comprehensive research on specific timelines;, • Excellent writing skills ranging from client memorandums to law and motion work in adversarial proceedings;, • Ability to handle and manage, with limited supervision and oversight, preparing and responding to written discovery;, • Ability to interface with clients and convey a level of professionalism and competence in terms of both the legal and strategic issues in environmental and/or labor matters;, • Willingness to take ownership of a matter and ability to develop a plan and/or course of action;, • Personal attributes strongly preferred are a self-starter with excellent follow-through and communication skills; hard worker; impeccable judgment; and an entrepreneurial spirit.