Trabajos law en Santa Clarita, CaliforniaCrear alertas

Job Description Job Title: Sheet Metal Technician (Commercial HVAC Installer) Job Description This role focuses on commercial HVAC sheet metal installation for projects based in Palmdale, Santa Clarita, and the Greater San Fernando Valley area. You will install, assemble, and support a variety of duct systems and hot water piping components, ensuring high-quality workmanship and safe operation. The position follows a daytime schedule and offers the opportunity to transition from contract to a long-term role based on performance. Responsibilities • Install commercial HVAC sheet metal duct systems, including spiral, round, rigid, and flex ducting, according to project specifications., • Measure, cut, and assemble sheet metal ducts to precise dimensions using appropriate hand and power tools., • Install and secure hangers, supports, and insulation to ensure proper function and stability of HVAC systems., • Perform duct sealing and insulation to maintain system efficiency and prevent air leaks., • Use scissor lifts safely to install ductwork and related components at elevated heights, including up to 40-foot lifts., • Install round duct and associated fittings in commercial environments, ensuring correct alignment and support., • Troubleshoot and repair HVAC sheet metal systems and ductwork as needed to maintain proper operation., • Use drills and other hand tools to fasten and assemble components safely and efficiently., • Maintain a clean, organized, and safe work area, following all safety guidelines and wearing required protective gear., • Arrive on time, prepared with required tools and equipment, and consistently demonstrate reliability and a strong work ethic., • Travel to various jobsites, including locations between Palmdale and Los Angeles, as project needs require. Essential Skills • 4–5 years of HVAC sheet metal installation experience in commercial settings., • Proficiency installing spiral, round, rigid, and flex HVAC ducting., • Ability to measure, cut, and assemble sheet metal ducts to exact specifications., • Experience with commercial HVAC duct installation, including hangers, supports, and insulation., • Skill using hand and power tools, including drills, for sheet metal and ductwork., • Experience with duct sealing and insulation to ensure system performance., • Ability to perform troubleshooting and repair on HVAC sheet metal systems and ductwork., • Capability to work safely on scissor lifts, including up to 40-foot lifts, for elevated installations., • Ownership of necessary hand tools, including drills, to perform daily tasks., • Punctuality, reliability, and a strong work ethic, with readiness to work hard and complete tasks safely and efficiently. Additional Skills & Qualifications • Experience working specifically with commercial HVAC systems and duct installations., • Comfort working at heights on scissor lifts and other elevated platforms., • Ability to coordinate duct and piping installations in active commercial jobsite environments., • Experience installing supports, hangers, and insulation to meet mechanical design requirements., • Familiarity with air bleeding procedures and valve placement for hot water systems., • Reliable transportation to travel between Palmdale and jobsites in the Greater San Fernando Valley and Los Angeles areas., • Readiness to work within a contract-to-hire arrangement over approximately six months., • Ability to follow safety protocols consistently and wear required protective equipment., • Strong attention to detail and commitment to producing clean, accurate, and code-compliant work. Why Work Here? You will join a down-to-earth company that prioritizes taking care of its employees and values reliability, teamwork, and craftsmanship. After ninety days, you become eligible for a comprehensive benefits package that includes health, vision, and dental insurance, along with participation in a 401(k) program. The schedule offers consistent daytime hours, and the contract-to-hire structure provides a clear path to long-term stability for those who perform well and demonstrate commitment. Work Environment This role is based out of the Palmdale area, with projects starting in Palmdale and extending to jobsites between Palmdale and Los Angeles. The standard work schedule runs from 6:00 a.m. to 2:30 p.m., providing predictable daytime hours. You will work primarily on commercial HVAC installations, often in active construction or retrofit environments that require attention to safety and coordination with other trades. The position involves regular use of hand and power tools, including drills, as well as frequent work on scissor lifts up to approximately 40 feet to install round duct and related components at height. You must provide and use your own hand tools and arrive prepared to work each day. The role requires consistent use of personal protective equipment, including a hard hat, safety vest, work boots, long pants, and a T-shirt, in accordance with jobsite safety standards. Reliable transportation is essential to reach various jobsites across the region, and the work environment emphasizes safety, professionalism, and steady, high-quality field installation work. Job Type & Location This is a Contract to Hire position based out of Santa Clarita, CA. Pay and Benefits The pay range for this position is $30.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Santa Clarita,CA. Application Deadline This position is anticipated to close on Jun 30, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description$17.81-$17.81 Plus Tips $17.81-$17.81 Plus Tips This is an Hourly and Non-Exempt position. Join the Fun, Stay for the Career! If you are looking for a great place to work, have fun, and make money mate, click to apply. Come join the Outback family as an Outbacker, where you will make memorable first and last impressions with all our customers. You will support our commitment to bringing the best of who we are to deliver perfectly tailored service to each and every guest. As an Outbacker, you’ll help to provide each customer with an AUS-SOME dining experience in the restaurant, that makes each guest’s day better. BENEFITS: • Comprehensive health insurance (medical, dental, vision) for employees eligible under ACA measurement rules., • Employees accrue and may use paid sick leave in accordance with California law and applicable local city or county ordinances. EXTRAS: • Growth Opportunities! Training and advancement opportunities may be available for qualified candidates, including our Shift Leader program with extensive on the job training., • Hospitable culture that recognizes hard work, effort, perseverance, and leadership., • Closed Thanksgiving & Christmas Day so our team can enjoy time with family & friends., • Different scheduling options to support our team and ensure excellent service for our guests. Tasty perks: Meal discounts., • Company sponsored Employee Assistance Program (EAP)., • We are the largest franchisee of Outback Steakhouse., • Plenty of future possibilities to advance in your career! RESPONSIBILITIES: • Makes memorable first and last impressions with a smile., • Greets incoming and departing Guests in a welcoming manner. Seats guests in the dining and bar areas, while ensuring a smooth handoff to service staff., • Coordinates wait, and seats Guests with a sense of urgency., • Always smiles and has genuine conversations with Guests., • Demonstrates teamwork by supporting all areas of the restaurant as business needs arise. Teamwork is essential and expected of all Outbackers., • Commitment to food safety, cleanliness, job safety and sanitation standards., • Busses tables, delivers food and supports the dining room, while ensuring every opportunity to WOW our guests is fulfilled. Teamwork is essential and expected of all Outbackers., • Will have a general knowledge of the food and drink menu and be able to recommend and upsell products., • Answers the phone in a prompt and professional manner and directs calls., • Leads the lobby experience for each Guest, following Outback hospitality standards., • As a Servers Assistant, you will be assisting guests and supporting Servers by serving food and beverages, clearing and resetting tables, and ensuring a clean, welcoming dining environment. REQUIREMENTS: • Ability to lift, carry or move up to 30 lbs., • Able to work in hot and cold environments., • Ability to walk and stand for extended periods of time, up to 8 hours per shift., • Frequent bending, reaching, kneeling, squatting and stooping., • Manual dexterity to handle glassware, utensils and technology systems., • Ability to move quickly in a fast-paced environment., • Visual ability to include distance, close, color, depth and peripheral. Also, the ability to adjust focus as needed. The role involves working in areas with low or dim lighting., • Ability to perform essential functions of the job with or without reasonable accommodation., • For all California based positions: Responsible Beverage Service Certifications Required (can be completed during training, and up to 60 days after start date). The Company provides reasonable accommodation as required by law and does not retaliate against employees for exercising their rights under California law, including protected leave, disability accommodations, or wage and hour rights. The Company is committed to pay equality and fully complies with the California Equal Pay Act. The Company complies with all applicable California wage and hour laws, including minimum wage, overtime, meal periods, rest breaks, reporting time pay, and split shift pay. All newly hired employees are subject to and must successfully complete the Electronic Employment Eligibility Verification Program (E-Verify). You can view the E-Verify Participation and Right to Work poster at https://www.outwestrg.com/e-verify California applicants have rights under the California Consumer Privacy Act (CCPA) and the California Privacy Rights Act (CPRA) outlined in our applicant privacy notice along with our data practices. This posting does not create a contract of employment. Employment with the company is at-will and may be terminated at any time by either party, with or without cause or notice, subject to applicable law. ABOUT US: We are Out West Restaurant Group, the largest franchisee of Outback Steakhouse in the United States. Outback Steakhouse is an Australian theme restaurant that opened in March of 1988. At Outback Steakhouse we take food seriously, without forgetting the fun, and we are proud to do things uniquely and strive to positively impact the lives of our people we call “Outbackers”. We believe if you treat people “Just Right” then success is sure to follow. It’s a culture of respect and camaraderie that breeds enthusiasm. We start by indulging each customer like a guest in our own home. We continue by committing to the success of each and every Outbacker to be trained to the best of their ability. Out West Restaurant Group is an equal opportunity employer. We do not discriminate based on race, color, religion, sex, national origin, age disability, or any other protected status. All employment decisions at Outback are based on business needs, job requirements and individual qualifications without regard to any characteristics protected by both federal and state laws. We are committed to fairness, respect, and opportunity for all employees. Monitor 200 Award: Ranked in Top 50 Franchisees in the U.S., 4 years in a row. International Franchise Association’s Franchisee of the Year: Award 2022, for Exemplifying Excellence in Local Community Service. Proud contributor to non-profit organizations, California Care and CORE. Both organizations do incredible work, providing essential support to restaurant employees and their families during challenging times. We are continually seeking great talent, and applications are accepted on an ongoing basis.

Job Description$17.81-$17.81 Plus Tips This is an Hourly and Non-Exempt position. Join the Fun, Stay for the Career! If you are looking for a great place to work, have fun, and make money mate, click to apply. Come join the Outback family as an Outbacker, where you will make memorable first and last impressions with all our customers. You will support our commitment to bringing the best of who we are to deliver perfectly tailored service to each and every guest. As an Outbacker, you’ll help to provide each customer with an AUS-SOME dining experience in the restaurant, that makes each guest’s day better. BENEFITS: • Comprehensive health insurance (medical, dental, vision) for employees eligible under ACA measurement rules., • Employees accrue and may use paid sick leave in accordance with California law and applicable local city or county ordinances. EXTRAS: • Growth Opportunities! Training and advancement opportunities may be available for qualified candidates, including our Shift Leader program with extensive on the job training., • Hospitable culture that recognizes hard work, effort, perseverance, and leadership., • Closed Thanksgiving & Christmas Day so our team can enjoy time with family & friends., • Different scheduling options to support our team and ensure excellent service for our guests. Tasty perks: Meal discounts., • Company sponsored Employee Assistance Program (EAP)., • We are the largest franchisee of Outback Steakhouse., • Plenty of future possibilities to advance in your career! RESPONSIBILITIES: • Responsible for exceeding customer expectations by providing friendly, prompt, and attentive service, guided by each guest’s preferences and cues., • Demonstrates strong knowledge of our food and drink menu and confidently recommends, upsells, and supports guests’ order selections., • Prepares food and condiments adhering to Outback standards., • Ensures accurate guest orders to deliver a satisfying experience. Busses tables, delivers food and beverages, and ensures every opportunity to WOW a customer is complete. Teamwork is essential and required by all Outbackers., • Strong commitment to high standards in food safety, cleanliness, job safety, and sanitation., • Handles cash and credit transactions accurately., • Supports all areas of the restaurant as needed, reflecting the teamwork expected of every Outbacker. REQUIREMENTS: • Must be at least 18 years old to sell alcohol., • Ability to lift, carry or move up to 30 lbs., • Able to work in hot and cold environments., • Ability to walk and stand for extended periods of time, up to 8 hours per shift., • Frequent bending, reaching, kneeling, squatting, and stooping., • Manual dexterity to handle glassware, utensils, and technology systems., • Ability to move quickly in a fast-paced environment., • Visual ability to include distance, closeness, color, depth and peripheral. Also, the ability to adjust focus as needed. The role involves working in areas with low or dim lighting., • Ability to perform essential functions of the job with or without reasonable accommodation., • For all California based positions: Responsible Beverage Service Certifications Required (can be completed during training, and up to 60 days after start date). The Company provides reasonable accommodation as required by law and does not retaliate against employees for exercising their rights under California law, including protected leave, disability accommodations, or wage and hour rights. The Company is committed to pay equality and fully complies with the California Equal Pay Act. The Company complies with all applicable California wage and hour laws, including minimum wage, overtime, meal periods, rest breaks, reporting time pay, and split shift pay. All newly hired employees are subject to and must successfully complete the Electronic Employment Eligibility Verification Program (E-Verify). You can view the E-Verify Participation and Right to Work poster at https://www.outwestrg.com/e-verify California applicants have rights under the California Consumer Privacy Act (CCPA) and the California Privacy Rights Act (CPRA) outlined in our applicant privacy notice along with our data practices. This posting does not create a contract of employment. Employment with the company is at-will and may be terminated at any time by either party, with or without cause or notice, subject to applicable law. ABOUT US: We are Out West Restaurant Group, the largest franchisee of Outback Steakhouse in the United States. Outback Steakhouse is an Australian theme restaurant that opened in March of 1988. At Outback Steakhouse we take food seriously, without forgetting the fun, and we are proud to do things uniquely and strive to positively impact the lives of our people we call “Outbackers”. We believe if you treat people “Just Right” then success is sure to follow. It’s a culture of respect and camaraderie that breeds enthusiasm. We start by indulging each customer like a guest in our own home. We continue by committing to the success of each and every Outbacker to be trained to the best of their ability. Out West Restaurant Group is an equal opportunity employer. We do not discriminate based on race, color, religion, sex, national origin, age disability, or any other protected status. All employment decisions at Outback are based on business needs, job requirements and individual qualifications without regard to any characteristics protected by both federal and state laws. We are committed to fairness, respect, and opportunity for all employees. Monitor 200 Award: Ranked in Top 50 Franchisees in the U.S., 4 years in a row. International Franchise Association’s Franchisee of the Year: Award 2022, for Exemplifying Excellence in Local Community Service. Proud contributor to non-profit organizations, California Care and CORE. Both organizations do incredible work, providing essential support to restaurant employees and their families during challenging times. We are continually seeking great talent, and applications are accepted on an ongoing basis.

Job Description A.S. Aerospace Inc. manufactures high strength specialty fasteners, including nuts, bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government and the most demanding customers in the aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. General Aerospace Manufacturing Shop Laborer Department: General Aerospace Manufacturing Shop Laborer Department/ Area: Manufacturing Position Summary: The candidate will be responsible for operating the CNC Lathe, running, and checking production. Daily tasks: Engage in general shop labor activities that may have a wide rage of different responsibilities at an entry level capacity. fasteners meeting quality and production targets. Check bolts using precision measuring tools and gages. Record daily production into SPC and shop floor control systems Minimum Qualifications: • Strong mechanical aptitude and problem-solving skills, • Ability to read blueprints, • Do first Article Inspection, • Lifting to 40 lbs. and moving 40 lbs. pans with dollies., • Standing for extended periods of time, bending, stooping, reaching, and grasping to operate machinery Reporting Relationships: Director of Manufacturing and Plant Manager Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand; walk; reach with hands and arms; stoop, kneel, or crouch; bend or twist their body. The employee must frequently lift and/or move up to 40 pounds. The employee is frequently required to repeat the same motion by using their hands to handle, control, or feel objects, tools, or controls and use their foot to press a foot peddle. Strong attention to detail and the ability to concentrate for long periods of time. Hearing level within normal/average range. Working Conditions: First shift position. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or slippery conditions; high, precarious places; fumes and chemical; extreme heat and vibration. The noise level in the work environment is usually loud. The employee is required to work with cutting fluids (such as oils and coolants). Requires full work time only. 8 hours a shift- Monday to Friday- overtime expected depending on production needs. Regular attendance is an essential job function. This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. A.S. Aerospace Inc. is and Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. A.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirement of Los Angeles Municipal Code, Chapter XVIII, Article 9. A.S. Aerospace Inc. 21095 Centre Pointe Pkwy, Santa Clarita, CA 91350 Company DescriptionAS Aerospace manufactures high strength specialty fasteners, including nuts, bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government and the most demanding customers in the aviation industry. We offer Medical, Dental, Vision and 401K benefits as well as monthly bonuses.AS Aerospace manufactures high strength specialty fasteners, including nuts, bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government and the most demanding customers in the aviation industry. \r\nWe offer Medical, Dental, Vision and 401K benefits as well as monthly bonuses.

Job Description: We Deliver the Goods: • Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much more., • Growth opportunities performing essential work to support America’s food distribution system., • Safe and inclusive working environment, including culture of rewards, recognition, and respect. Positions Details: • Component Pay up to $3,600 (Bi-Weekly pay), • Monthly and Annual Bonus, • 4 day work week, • 5:00AM Start Time Position Purpose: Food and food service delivery Drivers fulfill a critical role in the country’s food supply chain. Our delivery drivers not only make sure the customers’ products arrive at their destination at the arranged times and in good condition, but they are the face of our company – building lasting relationships with our customers! The Driver, Hourly CDL-A is responsible for driving a tractor trailer or straight truck on intrastate and interstate local, over-the-road (OTR), shuttle, and overnight and drive and drop routes for the purpose of delivering and/or unloading food and food related products to customers in a safe and timely manner and in accordance with Department of Transportation (DOT) regulations. Communicates and interacts with customers, vendors and co-workers professionally ensuring questions are answered accurately and in a timely manner. Functions as a team member within the department and organization, as required, and perform any duty assigned to best serve the company. Responsibilities may include, but not limited to: • Performs all required safety checks (i.e., pre/post trip) including inspections of tractor/truck and trailer according to Department of Transportation (DOT) regulations; inspects tractor/truck and trailer to insure they meet company safety standards and take appropriate action as needed. Reports all safety issues and/or repairs required., • Follows all DOT regulations and company safe driving guidelines and policies., • Immediately reports all safety hazards. Inspects trailer for properly loaded and secured freight., • Performs count check of items and check customer invoices of products that have been loaded. Checks and completes in an accurate and in legible fashion all required paperwork associated with freight., • Moves tractor to the loading dock and attach preloaded trailer as needed., • Drives to and delivers customer orders according to predetermined route delivery schedule. Unloads products from the trailer, transports items into designated customer storage areas., • Performs damage control checks on items, scans, and contact supervisor about removing orders according to company policy. Verifies delivery of items with customer and obtain proper signatures. Collects money (cash or checks) where required., • Loads customer returns on to trailer and secures trailer doors. Ensures that tractor, trailer, and freight are appropriately locked and/or always secured., • Unloads damaged goods and customer returns and bring to the driver check-in and complete necessary paperwork. Unloads all equipment, materials and remove trash from trailers as required., • Completes daily record of hours of service and enter in log in accordance with Federal DOT, state, and company requirements., • Performs general housekeeping duties in tractor, loading dock area and keep trailers clear and clean as required. At the end of the shift secure all equipment and complete all necessary paperwork., • Performs other related duties as assigned. Qualifications: • High School Diploma/GED or Equivalent, • 1 + year of commercial driving experience, • Valid CDL-A Must be 21+ years of age, • Meet all State licensing and/or certification requirements (where applicable), • Clean Motor Vehicle Report (MVR) for past 3 years, • Pass post offer drug test and criminal background check, • Pass road test, • Attains or has valid current DOT Health Card and/or able to secure new DOT Health Card, • Able to hand-lift and utilize two-wheeler, lift gate and/or other equipment to move and/or stack product cases/freight of varying size and weight throughout shift; product generally ranges from between 10-35 pounds and up to between approximately 60 and 90 pounds, depending on the location Company description Core-Mark continues to grow as the industry leader in fresh and broadline solutions for the convenience retail industry. With a reputation for empowering customers, employees, and communities, Core-Mark has become the largest, most comprehensive marketer of consumer goods in North America — offering a full range of products, programs, and solutions to convenience operators across the U.S. and Canada. Awards and Accolades Performance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our ; (2) the "EEO is the Law" and ; and (3) the .

Overview: If you reside in California, please see our _ for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking a Fleet Maintenance Manager who will be a dynamic, multi-task oriented senior professional to manage all day-to-day maintenance aspects of this fixed route bus operation. The Fleet Maintenance Manager will ensure that all contractual requirements are achieved, and duties included will consist of daily, weekly, monthly and annual reports. The Fleet Maintenance Manager must be able to properly manage a budget for maintenance program. Qualifications: Talent Requirements: • Must have at least three (3) or more years of recent (within the last five (5) years) and relevant experience managing the maintenance functions of a transit bus maintenance shop similar in scope, size, and complexity and with same or similar type of transit vehicles/equipment., • Must have experience managing/ directing 10 plus employees (fleet Technicians/Service Workers/Cleaners)., • Experience working with 50 + buses within the last year., • Previous passenger transportation in current project or similar environment preferred., • Must be able to manage and interface with client., • Must have the ability to track and control parts inventories, vendors and suppliers., • Must be able to properly prioritize, implement and manage work schedules, projects and assignments., • Must be able to manage the financial/accounting aspects of a fleet maintenance operation., • Must be able to communicate effectively with all levels of staff in written and oral formats., • Must have computer skills including word processing, spreadsheets and Microsoft outlook., • Must have technical competence with light/medium/heavy duty vehicle repair and preventive maintenance., • Must display initiative, professionalism, candor and tact at all times., • ASE or manufacture’s certifications a plus., • Technical experience with fixed route transit bus maintenance., • Solid knowledge of managing audits, PM schedules., • Experience with Diesel, CNG, and Alternative fuels a plus., • Must have a CDL class B with passenger and airbrake endorsement. Starting pay rate: $120,000 - $140,000 MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Overview: If you reside in California, please see our _ for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits?! Would you like to work with a company that invests in your growth? Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are: As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary. What’s in it for YOU: • Competitive Pay Rates!, • 40 hours a week, not flat rate, • OT as needed over 40 hours, • Full Benefits: Medical, Vision, Dental, and 401K plan, • Paid vacation, • Company provided uniform, • Corporate partner discount program, • Career advancement through a national company Duties include, but are not limited to the following: • Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components., • Perform scheduled preventative maintenance of vehicles, • Execute major and minor repairs of defective components., • Document all activities in MV’s Fleet Management System., • Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements: • High school diploma or equivalent., • Combination of at least two (2) to three (3) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program., • Must be able to pass a pre-employment drug screen and random drug testing. Starting pay rate: $38.68/hour MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Facey Medical Group has an excellent opportunity for a full-time board-eligible/board-certified Otolaryngology (ENT) physician. The candidate should be comfortable providing all general and surgical ENT services and maintain a strong emphasis on patient satisfaction. This role will be based in Valencia, California but will also provide some coverage at Mission Hills facility. • Full-time position, Monday to Friday schedule, • Provide coverage at Valencia location and Mission Hills facility, • Call will be 1:3 with nights and weekends, • Panel call is available and optional, compensated by an additional stipend from the hospitals, • Provision for the establishment of a cosmetic practice is not expected, • Experience preferred; new graduates are welcome to apply, • Compensation is between $420,000 and $530,000 per year, • The posted salary reflects the starting range of total compensation and may include productivity bonuses, incentives related to quality and performance, hospital/ED call stipends, extra shift incentives, and other forms of cash compensation as applicable to the position. In addition, providers typically receive a CME allowance and other benefits offered by their medical group employer. Please note that this salary range is provided in accordance with State law and is subject to variation due to the factors noted above Where You’ll Work Facey Medical Group is a physician-owned, physician-run multi-specialty group in the greater Los Angeles area with over 100 years of clinical excellence. The group employs more than 250 physicians from multiple specialties including adult primary care, medical specialists, hospitalists, OBGYN, pediatrics, surgical (general and specialists) and urgent care. With an aligned leadership structure that has strong participation by their physicians, the group can focus on quality initiatives while providing advanced, evidence-based care. Where You’ll Live Mission Hills is located about eight miles northwest of Burbank in north Los Angeles County. This area, the northern San Fernando Valley and neighboring Santa Clarita Valley, is among the fastest-growing in all of Southern California. It is a thriving center of commerce and industry, and grants easy access to popular beach communities such as Ventura and Santa Barbara. Who You’ll Work For Facey Medical Group physicians provide quality care in offices and hospitals throughout the San Fernando, Santa Clarita, and Simi Valleys. Facey is dedicated to service, innovation and quality care, and remain committed to the wellness of the communities we serve. Facey Medical Group is also proudly affiliated with Providence Holy Cross Medical Center, Providence Saint Joseph Medical Center, Providence Cedar-Sinai Tarzana Medical Center, and other area local hospitals. Equal Opportunity Employer including disability/veteran

Facey Medical Group has an excellent opportunity for a full-time board-eligible/board-certified Otolaryngology (ENT) physician. The candidate should be comfortable providing all general and surgical ENT services and maintain a strong emphasis on patient satisfaction. This role will be based in Valencia, California but will also provide some coverage at Mission Hills facility. • Full-time position, Monday to Friday schedule, • Provide coverage at Valencia location and Mission Hills facility, • Call will be 1:3 with nights and weekends, • Panel call is available and optional, compensated by an additional stipend from the hospitals, • Provision for the establishment of a cosmetic practice is not expected, • Experience preferred; new graduates are welcome to apply, • Compensation is between $420,000 and $530,000 per year, • The posted salary reflects the starting range of total compensation and may include productivity bonuses, incentives related to quality and performance, hospital/ED call stipends, extra shift incentives, and other forms of cash compensation as applicable to the position. In addition, providers typically receive a CME allowance and other benefits offered by their medical group employer. Please note that this salary range is provided in accordance with State law and is subject to variation due to the factors noted above Where You'll Work Facey Medical Group is a physician-owned, physician-run multi-specialty group in the greater Los Angeles area with over 100 years of clinical excellence. The group employs more than 250 physicians from multiple specialties including adult primary care, medical specialists, hospitalists, OBGYN, pediatrics, surgical (general and specialists) and urgent care. With an aligned leadership structure that has strong participation by their physicians, the group can focus on quality initiatives while providing advanced, evidence-based care. Where You'll Live Mission Hills is located about eight miles northwest of Burbank in north Los Angeles County. This area, the northern San Fernando Valley and neighboring Santa Clarita Valley, is among the fastest-growing in all of Southern California. It is a thriving center of commerce and industry, and grants easy access to popular beach communities such as Ventura and Santa Barbara. Who You'll Work For Facey Medical Group physicians provide quality care in offices and hospitals throughout the San Fernando, Santa Clarita, and Simi Valleys. Facey is dedicated to service, innovation and quality care, and remain committed to the wellness of the communities we serve. Facey Medical Group is also proudly affiliated with Providence Holy Cross Medical Center, Providence Saint Joseph Medical Center, Providence Cedar-Sinai Tarzana Medical Center, and other area local hospitals. Equal Opportunity Employer including disability/veteran

Job Description Volt is immediately hiring for Conventional Small OD Grinder - 2nd Shift in Valencia, CA As a Conventional Small OD Grinder - 2nd Shift you will: • Perform conventional grinding of landing gear components using machinery such as:, • Gap Grinders, • O/D Grinders, • I/D Grinders, • Flat/Surface Grinder, • Set up and machine operations on high strength steel and aluminum parts., • May run one or more machines on a regular basis, • Ensuring that machine work meets dimensional tolerances as noted on shop planning and that defects are removed within specified limits, • Inspect parts visually and dimensionally, and perform clean-up operations as required such as deburr and breaking of edges, • Follow all safety, hazardous-material, and environmental regulations (OSHA, EPA, SCAQMD) and comply with clean-room or controlled-environment protocols where required., • Meet target hours and schedules as set by Supervision This is a full-time contract to hire opportunity. The ideal candidate will have: Required Skills & Qualifications • The ability to read, write and understand English, • Detail oriented with excellent time management skills, • Ability to read and understand OHM/ CMM's, blueprints, shop travelers and sketches, • Ability to identify different plated surfaces such as chrome plate, nickel plate, cad plate and various thermal sprayed surfaces, • Must be able to perform measurements using inspection tools such as, but not limited too; micrometers, dial bore gages, telescope gages, height gages, and indicators, • General knowledge of set-up, loading and adjusting machines and equipment, • Practical experience with the procedures, practices, inspection methods, materials, tools and equipment generally used in the work for which the repair station is rated Work Environment • Shop floor environment within an FAA-certified landing gear repair station Schedule: 2nd Shift: 3pm - 11:30pm (Typically OT available beyond those hours and on the weekends) Days: Tuesday - Saturday Pay Rate Range: $21 to $35 per hour *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP). Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please email hr_dept@volt.com or call (866) -898-0005. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Innova Solutions and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at volt-information-sciences-privacy-policy.pdf Pandologic. Keywords: Grinding Machine Operator, Location: Valencia, CA - 91355 , PL: 603680195

Facey Medical Foundation is seeking a board-eligible or board-certified Pediatrician to join a long‑established, collaborative medical group in Canyon Country, California. This position is available due to the planned retirement of a pediatrician after 30 years and offers the opportunity to step into a stable practice with strong support, modern facilities, and excellent work‑life balance. The group is open to physicians at any stage of their career, including new residency graduates, and values a friendly, team‑oriented approach to patient care. Key Position Details: • Outpatient pediatric care for patients ages 0-17, • Average of 20-30 patients per day with age‑appropriate visit lengths, • Light call schedule, • Nurse triage support screens initial calls, • Inpatient responsibilities limited to normal newborn rounding, • Compensation is between $240,000 and $280,000 per year, • Comprehensive benefits, and shareholder opportunity within three years, • Modern clinic opened in 2018, • 2 pediatrician site with dedicated clinical and front‑office support, • Relative autonomy in practice style, • Supportive group culture The posted salary reflects the starting range of total compensation and may include productivity bonuses, incentives related to quality and performance, hospital/ED call stipends, extra shift incentives, and other forms of cash compensation as applicable to the position. In addition, providers typically receive a CME allowance and other benefits offered by their medical group employer. Please note that this salary range is provided in accordance with State law and is subject to variation due to the factors noted above. Where You’ll Work Facey Medical Group is a physician-owned, physician-run multi-specialty group in the greater Los Angeles area with over 100 years of clinical excellence. The group employs more than 250 physicians from multiple specialties including adult primary care, medical specialists, hospitalists, OBGYN, pediatrics, surgical (general and specialists) and urgent care. With an aligned leadership structure that has strong participation by their physicians, the group can focus on quality initiatives while providing advanced, evidence-based care. Where You’ll Live Canyon Country is located in the Santa Clarita Valley, offering a blend of suburban comfort and outdoor recreation while remaining within commuting distance of the greater Los Angeles area. Residents enjoy access to scenic hiking and biking trails, open spaces, and a family‑friendly atmosphere with strong community appeal. The area provides a more relaxed pace of life compared to central Los Angeles, with convenient access to shopping, dining, and highly regarded schools. Canyon Country is an attractive option for physicians seeking work‑life balance, modern amenities, and proximity to both urban and natural environments. Who You’ll Work For Facey Medical Group physicians provide quality care in offices and hospitals throughout the San Fernando, Santa Clarita, and Simi Valleys. Facey is dedicated to service, innovation and quality care, and remain committed to the wellness of the communities we serve. Facey Medical Group is also proudly affiliated with Providence Holy Cross Medical Center, Providence Saint Joseph Medical Center, Providence Cedar-Sinai Tarzana Medical Center, and other area local hospitals. Equal Opportunity Employer including disability/veteran

Description RN - Labor and Delivery unit at Providence Holy Cross Medical Center Mission Hills, CA. Positions available are Full time and will work 12-hour Night shifts. Providence Holy Cross Medical Center is four-time designated for Magnet® status, the highest recognition for nursing excellence, making it one of just four hospitals in California to achieve this status. Since 2007, Holy Cross has been recognized as a Magnet® hospital—a prestigious designation from the American Nurses Credentialing Center (ANCC), which recognizes organizations that provide the highest-quality care. Only 9.96% of U.S. hospitals earn Magnet® recognition, which means that only 1% of U.S. hospitals are four times designated. Providence Holy Cross Medical Center, recognized as one of the best regional hospitals in 10 types of care by U.S. News & World Report. We are also the proud recipient of multiple Healthgrades awards, including America’s 50 Best Hospitals and Patients Safety Excellence for three consecutive years. Providence nurses are not simply valued – they’re invaluable. You will thrive in our culture of patient-focused, whole-person care built on understanding, commitment, and mutual respect. Your voice matters here, because we know that to inspire and retain the best nurses, we must empower them. Learn why nurses choose to work at Providence by visiting our Nursing Institute page. Join our team at Providence Holy Cross Medical Center as a Providence caregiver, you’ll apply your specialized training to deliver world-class health with human connection and make a difference every day through your extraordinary care. Required Qualifications: • Graduation from an accredited nursing program., • California Registered Nurse License upon hire., • National Provider BLS - American Heart Association upon hire., • California Fire and Life Safety Card - National Organization within 30 days of hire, • National Provider NRP - American Academy of Pediatrics upon hire., • 1 year - Nursing experience. Preferred Qualifications: • National Certification in area of specialty is preferred upon hire, unless otherwise indicated. Why Join Providence? Our best-in-class benefits are uniquely designed to support you and your family in staying well, growing professionally, and achieving financial security. We take care of you, so you can focus on delivering our Mission of caring for everyone, especially the most vulnerable in our communities. About Providence At Providence, our strength lies in Our Promise of “Know me, care for me, ease my way.” Working at our family of organizations means that regardless of your role, we’ll walk alongside you in your career, supporting you so you can support others. We provide best-in-class benefits and we foster an inclusive workplace where diversity is valued, and everyone is essential, heard and respected. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. As a comprehensive health care organization, we are serving more people, advancing best practices and continuing our more than 100-year tradition of serving the poor and vulnerable. Posted are the minimum and the maximum wage rates on the wage range for this position. The successful candidate's placement on the wage range for this position will be determined based upon relevant job experience and other applicable factors. These amounts are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities. Providence offers a comprehensive benefits package including a retirement 401(k) Savings Plan with employer matching, health care benefits (medical, dental, vision), life insurance, disability insurance, time off benefits (paid parental leave, vacations, holidays, health issues), voluntary benefits, well-being resources and much more. Learn more at providence.jobs/benefits. Applicants in the Unincorporated County of Los Angeles: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Unincorporated Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. About the Team The Sisters of Providence and Sisters of St. Joseph of Orange have deep roots in California, bringing health care and education to communities from the redwood forests to the beach shores of Orange county - and everywhere in between. In Southern California, Providence provides care throughout Los Angeles County, Orange County, High Desert and beyond. Our award-winning and comprehensive medical centers are known for outstanding programs in cancer, cardiology, neurosciences, orthopedics, women's services, emergency and trauma care, pediatrics and neonatal intensive care. Our not-for-profit network provides a full spectrum of care with leading-edge diagnostics and treatment, outpatient health centers, physician groups and clinics, numerous outreach programs, and hospice and home care, and even our own Providence High School. Providence is proud to be an Equal Opportunity Employer. We are committed to the principle that every workforce member has the right to work in surroundings that are free from all forms of unlawful discrimination and harassment on the basis of race, color, gender, disability, veteran, military status, religion, age, creed, national origin, sexual identity or expression, sexual orientation, marital status, genetic information, or any other basis prohibited by local, state, or federal law. We believe diversity makes us stronger, so we are dedicated to shaping an inclusive workforce, learning from each other, and creating equal opportunities for advancement. Requsition ID: 436265 Company: Providence Jobs Job Category: Nursing-Patient Facing Job Function: Nursing Job Schedule: Full time Job Shift: Multiple shifts available Career Track: Nursing Department: 7003 PHCMC L AND D Address: CA Mission Hills 15031 Rinaldi St Work Location: Providence Holy Cross Medical Ctr-Mission Hills Workplace Type: On-site Pay Range: $54.05 - $83.90 The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities. PandoLogic. Keywords: Certified Registered Nurse (RN) - Midwife, Location: Santa Clarita, CA - 91350

Hydration Room is seeking a Registered Nurse (RN) Clinic Infusion for a nursing job in Santa Clarita, California. Job Description & Requirements • Specialty: Infusion, • Discipline: RN, • Duration: Ongoing, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Staff Why You’ll Love this Full Time Registered Nurse (RN) Job! Leave behind the hospital hustle and discover a more fulfilling path as a Registered Nurse (RN) at Hydration Room. This is your opportunity to maintain a healthy work-life balance while continuing to make a real difference with the skills you’ve worked hard to earn! In this Registered Nurse (RN) role, you’ll administer IV and injection therapies, provide patient education, and support overall wellness through guidance on nutrition, exercise, and preventive health measures. Schedule: This is a full-time position. You will select to work either 4 OR 5 shifts per week (8 hours per shift), with 3 weekend shifts required per month. You will submit 4 days of unavailability per month. Pay: $ 53.00 base hourly rate + competitive tips (up to $15 per hour) Why Hydration Room? Monthly Pay Guarantee Program: For your first six months, if your tips don’t average at least $10 per hour, we’ll make up the difference to ensure you’re always earning more. Vacation Time Insurance: Medical, dental, vision, paid life insurance, and voluntary benefits Future Planning: 401(k) Career Development Opportunities Exclusive Perks: Enjoy complimentary IV therapy and injection benefits Flexible Scheduling: We work with you to accommodate your availability! Locations You’ll Cover: Stevenson Ranch, Valencia, Porter Ranch and North Hollywood locations plus occasional Mobile IV shifts. Clinic Hours: Team members must be available for scheduling during both morning/afternoon and afternoon/evening shifts within the hours of 8:00 AM to 8:00 PM. At Hydration Room, making a healthy difference together means you’re surrounded by people who show up for each other and make every shift something to look forward to. With wellness that works with your life, you’ll build a routine that fits your lifestyle and have access to therapies that help you feel your best on and off the clock. Through it all, you’ll keep leading the day-to-day with genuine support, backed by leaders who truly care about your growth. If you're ready to provide high-quality care in a clean, serene environment—this is your chance to make a meaningful impact every day. Apply today and join the Hydration Room team as a Registered Nurse (RN)! Responsibilities Maintain accurate, detailed reports and health records Promote membership programs, packages and treatment plans to patients Modify patient treatment plans as indicated by patients' responses and conditions Work with the District Nurse Manager to maintain nursing supplies inventory by checking stock to determine inventory level; anticipating needed supplies; placing and expediting orders for supplies; verifying receipt of supplies; using equipment and supplies as needed to accomplish job results Keep the clinic in compliance with Hydration Room inspections before and after each shift Maintain a safe, secure, and clean environment for customers Oversee Wellness Coordinator staff at clinics Maintain documentation of patient care services Train new staff Deliver Five Star Customer Service to ensure our patients have a positive experience in the clinic Perform other related duties as required and assigned by management staff Uphold standards of behavior as defined by the company's Core Values, Code of Conduct, and Operational Guidelines Requirements & Skills • Current BLS certification required, • BSN or diploma in nursing, • Valid RN License with no sanctions, past or present, • Minimum of two years of related clinical experience in an emergency room, preoperative, or IV infusion clinic setting, • Minimum of 10 IV insertions performed per shift in a fast-paced clinical setting, • Proficient in-patient charting systems, scheduling systems, Microsoft Office, or related software, • Excellent verbal and written communication skills, • Excellent organizational skills and problem-solving skills, • Understanding of great customer service, general sales, and patient care This job description indicates in general terms, the type and level of work performed as well as the typical responsibilities of employees in this classification. The duties described are not to be interpreted as being all inclusive or specific to any employee. The use of a particular expression or illustration describing duties shall not be held to exclude other duties not mentioned. This description is not intended to limit or in any way modify the right of any manager or supervisor to assign, direct, and control the work of employees. An ability to competently perform all the essential functions of the position (the combination of all essential duties and all essential skills and abilities listed above), with or without reasonable accommodation, is a basic requirement of all positions at the Hydration Room. The Hydration Room is an equal opportunity employer and will make reasonable accommodations in accordance with applicable law so that qualified employees can perform the essential functions of the job. Nothing in this job description changes the at-will employment relationship existing between the Hydration Room and its employees. The Hydration Room reserves the right to amend this job description at any time. Hydration Room Job ID #165812. About Hydration Room Hydration Room is powered by a team of skilled, compassionate nurses dedicated to delivering exceptional IV and injection therapy in a clean, serene, and wellness-focused environment. We provide an alternative to traditional healthcare settings, allowing nurses to prioritize patient care while maintaining a healthy work-life balance. Join a supportive, purpose-driven team committed to elevating wellness and redefining the patient care experience. Benefits • Weekly pay, • Holiday Pay, • Guaranteed Hours, • 401k retirement plan, • Dental benefits, • Vision benefits, • Sick pay, • Employee assistance programs, • Medical benefits, • Wellness and fitness programs, • Life insurance, • Discount program

Own the Territory. Win New Business. Build a Career That Grows With You. At Valet Living, you’re not just selling a service, you’re delivering solutions that transform communities, drive property value, and elevate the resident experience. Backed by industry-leading technology, a culture grounded in growth and servant leadership, and rewards that recognize overachievement, this is a platform built for top producers. Reporting to the Regional Sales Manager, you’ll play a critical role in driving growth by owning a designated territory and promoting Valet Living’s resident-facing amenities to multifamily communities. You’ll generate, develop, and close new opportunities while expanding our footprint across this key segment of the real estate market. This role is focused exclusively on new business development and requires selling to senior leaders, asset managers, and owners while building strong relationships at the regional and community level. We’re looking for a motivated, quick-learning sales professional who thrives in a results-driven, high-performance environment and is driven to succeed. Compensation & Work Environment Details: On-Target Earnings (OTE): $130,500 - $157,500 per year Salary Range: $72,500 - $87,500 Monthly Commission: Uncapped Ramp Up Guarantee: Monthly guarantee during ramp-up period Auto Allowance & Reimbursement: Bi-weekly fixed contribution + monthly variable mileage reimbursement Work Environment: Blended field-based & remote role with up to 70% travel within your territory What You’ll Do: Own and Grow a Territory: Execute a comprehensive go-to-market strategy that drives sustained revenue growth and increases market penetration across assigned markets. Conduct Discovery & Needs Assessment: Meet regularly with community decision‑makers to understand needs, identify NOI gaps, uncover operational inefficiencies, and position tailored solutions that drive measurable value. Develop New Business: Identify, pursue, and close new business opportunities by engaging community managers, regional managers, property owners, asset managers, and management groups to consistently meet and exceed monthly closing targets. Build and Scale Pipeline: Rapidly develop a robust pipeline through outbound prospecting, industry networking, phone outreach, in-person and virtual meetings, and other lead generation strategies. Manage Complex Sales Cycles: Lead multi-stakeholder, consultative sales processes, navigating decision-making structures and tailoring solutions to client needs from initial engagement through contract execution. Position Value & Differentiate Solutions: Serve as a trusted subject-matter expert by clearly articulating Valet Living’s value proposition, delivering compelling presentations, and differentiating solutions in a dynamic market. Industry & Regulatory Insight: Stay informed on multifamily industry trends, including California’s SB 1383 organic waste recycling requirements, and support clients by addressing compliance concerns through tailored waste management solutions. Support Client Transitions: Partner closely with Account Management and Operations teams to ensure smooth handoffs, clear expectations, and successful service launches for new clients. Maintain CRM Discipline: Ensure accurate documentation, forecasting, and pipeline visibility through consistent use of Salesforce. Invest in Development: Engage in ongoing professional development, coaching, and skill-building while staying current on industry trends and best practices. We’re Looking For: New Business Focus: You bring a consultative, growth-oriented mindset with a proven ability to originate and close new business in a results-driven, high-performance environment. Industry Experience Preferred: Previous experience selling in the multifamily industry is a plus but not required. Proven Sales Performance: Minimum of five (5) years of B2B outside consultative sales experience, with a strong track record of closing new business, navigating long sales cycles, and succeeding in a split compensation structure. Self-Motivated & Results-Driven: You don’t need hand-holding - you thrive on autonomy, accountability, and consistently delivering strong results. Consultative Sales Expertise: Ability to leverage persuasion, negotiation, and influence to engage economic buyers and decision-makers at all levels, including senior leaders, asset managers, and owners. Sales Methodologies: Experience with sales methodologies such as Miller Heiman/Korn Ferry Sell, Challenger, Sandler, MEDDPICC, SPIN, or Value Selling. Tech-Savvy & Organized: Salesforce experience preferred; strong time management, organization, and planning skills required to manage a high-velocity pipeline. Commitment to Growth: A mindset of continuous learning, professional development, and active contribution to company culture. Valid Driver’s License: This role requires frequent travel within your designated market. Why You’ll Love Working with Us: At Valet Living, we don’t just provide essential services; we build careers, create opportunities, and cultivate a culture of excellence. As part of our team, you’ll experience a workplace where leadership is about service, growth is the norm, and every detail matters. Robust Training Program: 4-week structured onboarding program to set you up for success Hands-on mentorship and ongoing support Comprehensive Benefits: Health Benefits: Medical, dental, and vision coverage for you & your family, plus HSA with employer contributions and Flexible Spending Accounts Flexible Time Off: No preset accruals - manage your time and work-life balance your way, plus 10 company-paid holidays. Financial Security: 401k with company match, life and disability insurance, AD&D, and business travel coverage Professional Development: Tuition reimbursement up to $5,250 per year and access to our online education center Additional Perks: Referral bonuses, pet insurance, associate assistance programs, discount programs, rewards, recognition, and free access to Torch Fitness virtual programs The final compensation offered will be determined based on various factors, including the candidate's location, level of experience, and skill set. As such, it may fall outside the range listed above. OTE varies based on performance. The application window is anticipated to close 60 days from the date the job is posted. #LI-RT1 Are you a current Valet Living employee? If so, click here to apply. Valet Living is an Equal Opportunity Employer that values the strength diversity brings to the workplace. We recruit, employ, train, compensate, and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law.

Valencia, CA – Seeking CRNAs Become a Valued Member of Your Anesthesia Team As a CRNA, you play a critical role in our mission to improve lives in Anesthesiology and are a valued member of the full care team. At Vituity we know the impact you can have. Join the Vituity Team. At Vituity we’ve cultivated an environment where passion thrives, and success comes through shared purpose. We were founded in a culture that values team accomplishments more than individual achievements, an approach we call “culture of brilliance.” Together, we leverage our strengths and experiences to make a positive impact in our local communities. We foster this through shared goals and helping our colleagues succeed, and we also understand the importance of recognition, taking the time to show appreciation and gratitude for a job well done. Vituity Locations: Vituity has opportunities at 890 practices across the country, serving 14.5 million patients a year. With Vituity, if you ever need to move, you can take your job with you. The Opportunity • Seeking valued, independent full-time Certified Registered Nurse Anesthetists (CRNAs) to join our Anesthesia team., • Great opportunity for an independent clinician desiring a varied practice where they can practice at the top of their license., • Experienced CRNA’s welcome. Full case mix including OB, General, and Ortho. • Independent practice without direct medical supervision., • Current CA state license a plus., • ACLS is required., • Providers may support affiliated surgery centers. The Practice Henry Mayo Newhall Hospital – Valencia, California • Level II Trauma Center with 350 staffed beds., • Full case mix including OB, general, ortho, regional, cranial., • Low volume of peds cases., • Four operating rooms plus two surgery centers; total of three anesthetizing locations., • In-house and overnight OB., • Compensation is 200 per hour. The Community • Valencia, California, located in Santa Clarita Valley, is a thriving community known for its family-friendly atmosphere, excellent schools, and vibrant economy., • Home to Six Flags Magic Mountain, one of the most famous amusement parks in California, Valencia offers entertainment and excitement just minutes away., • The city is also surrounded by scenic parks, hiking trails, and the beautiful Santa Clara River, perfect for outdoor enthusiasts., • Valencia’s Mediterranean climate features warm, dry summers and mild winters, making it ideal for enjoying its many outdoor activities year-round., • The city’s well-planned neighborhoods, convenient shopping centers, and proximity to Los Angeles (just 30 miles away) make it a desirable place to live and work. Salary range is 200 per hour. We are unified around the common purpose of transforming healthcare to improve lives and we believe everyone has a role to play in that. We know that when we work together across sites and specialties as an integrated healthcare team, we can exceed the expectations of our patients and the hospitals and clinics we work in. If you are looking to make a difference, from clinical to corporate, Vituity is the place to do it. Come grow with us. Vituity does not discriminate against any person on the basis of race, creed, color, religion, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information (including family medical history), veteran status, marital status, pregnancy or related condition, or any other basis protected by law. Vituity is committed to complying with all applicable national, state and local laws pertaining to nondiscrimination and equal opportunity. *Benefits for part-time and per diem vary. Please speak to a recruiter for more information. Applicants only. No agencies please.

Job Description At GameStop, we are committed to providing exceptional service and delivering the latest and greatest in gaming products to our customers. As a leading global retailer of video games, electronics, and gaming merchandise, we take pride in offering a wide range of products that cater to the needs and desires of gamers worldwide. Our mission is to create unforgettable experiences for our customers by constantly pushing the boundaries of what's possible. Whether you're a hardcore gamer or just starting out, we've got something for everyone. Join us in our mission to shape the future of gaming and bring the best gaming products to the world! Working with minimal supervision, the Assistant Store Manager supports the Store Manager in all facets of store operations. Using elements of GameStop's buy, sell, trade, and reservation business model, the Circle of Life, the Assistant Store Manager develops and promotes a sales culture by creating individualized and complete solutions for every guest and providing outstanding guest service experiences through professional conduct and shared passion for gaming. You will be responsible for ensuring that products are easy to see and buy, building sales by sharing product and gaming knowledge with guests, providing a clean, organized environment in which to shop, and growing guest loyalty and repeat business. This position supervises Sales Associates and Retail Keyholders in the absence of the Store Manager. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES • Provide best-in-class guest service: promptly greet guests; respond to guest questions/concerns quickly, effectively, and courteously; assist guests with meeting their video gaming needs; inform guests of special promotions; recommend additional items as appropriate; apply all selling behaviors during every transaction and thank every guest for shopping at GameStop; prioritize guests over tasks and demonstrate that commitment by circulating throughout the store., • Support the total shopping environment, including visual and operational elements, current sales initiatives, and the guest relationships that lead to sales and repeat business., • Promptly and accurately process guest purchases/return transactions using Point‐of‐Sale (POS) computer system via PC keyboard, including making correct changes, placing merchandise in a bag, providing a receipt, and ensuring top notch guest service., • Respond to guest comments or questions in person or on the phone; answer phone calls promptly, courteously, and professionally, using the phone greeting provided by GameStop; when appropriate, escalate customer issues and complaints to the Store Manager in a timely and professional manner., • Promote GameStop’s unique guest benefits, e.g., new title reservations program, trade-in program, and Pro Rewards guest loyalty program., • Assist the Store Manager with setting guest service expectations for store associates and training store associates in all aspects of their job responsibilities, including company/store policies, procedures, practices, and guidelines., • Observe associate performance, provide timely and appropriate feedback to Store Manager, and address unsatisfactory performance as directed, ensuring all store associates are aligned with company and store guest service expectations., • Provide timely and appropriate recognition and feedback to all store associates concerning performance; regularly input written feedback for each store associate into Workday / HR service management system in partnership with the Store Manager., • In partnership with the Store Manager, ensure store associates have completed all onboarding, job training, and compliance training PRIOR to opening or closing a shift on their own. Associates should know all aspects of their jobs, including all company/store policies, inventory control and loss prevention practices including scam awareness, safety best practices, financial protocol, and ethical responsibilities., • Along with the Store Manager, schedule store associates ensuring that the scheduling guidelines are followed, and all breaks and meals are accounted for as required. Supervise staffing levels to achieve optimum guest service at all times and ensure that best‐in‐class guest service is consistently provided., • Approve payroll, enter paid time off e.g. wellness, make time edits, and verify that store associates are paid for all time worked., • Ensure that all areas of the store, including restrooms, are clean, organized, and merchandised per company guidelines and all store fixtures and equipment are in proper working order., • Ensure Omni-Channel orders are fulfilled and shipped daily., • Protect company assets through effective inventory control and loss prevention practices including scam awareness, safety best practices, and delivering bank deposits as required; visually inspect associates' packages and/or belongings at store closing or at the end of a shift as appropriate. Communicate any concerns or issues to the Store Manager., • Support store team in meeting and exceeding sales, profit, and shrink goals and complete required administrative and operational duties., • Perform store inventory counts, stock/restock merchandise on shelves and fixtures, and move products from the stock room to the front of the store to ensure that all products in the store are represented, organized, and alphabetized on the sales floor., • Count, balance, and reconcile daily business transaction totals correctly and accurately in the POS system. Ensure that all closeout paperwork for daily business transactions and bank deposit slips are completed correctly and accurately; ensure store has sufficient cash and change for sales transactions; make bank deposits daily or per established guidelines., • Verify all shipments for discrepancies/shortages and record any discrepancies in the POS system; conduct merchandise counts/inventories and communicate discrepancies to Store Manager/District Manager., • Process defectives/recalls and stock pulls accurately and promptly, ensuring that all boxes are properly labeled and include packing lists., • Maintain awareness of associate and guest safety; identify and immediately address potentially hazardous situations. Report any injuries promptly per company guidelines., • Assist in maintaining store records/files in a neat and organized manner; help ensure that manuals are up to date., • Supervise and delegate tasks to Sales Associates and Retail Keyholders in absence of Store Manager., • Consistently adhere to GameStop policies and procedures, including, but not limited to, all policies and procedures in the Associate Handbook and the Code of Standards, Ethics & Conduct., • Adhere to all opening and closing procedures. QUALIFICATIONS* • Must provide proof of identity and eligibility to legally work in the United States., • Must be at least 18 years old., • High school diploma or equivalent required; associate’s or accredited bachelor’s degree with an emphasis in business, marketing, merchandising, or related field preferred., • At least 6 months of retail management experience preferred., • At least 2 years of retail sales, guest service, and/or management experience preferred., • Video game knowledge preferred. KEY JOB SKILLS AND ABILITIES • Possess an outgoing and welcoming personality with strong people skills., • Provide genuine and individualized assistance to every guest during every visit., • Demonstrate clear verbal and written communication and listening skills, both in person and on the phone, using spoken and written English; bilingual English/Spanish speaking and writing skills preferred., • Achieve objectives in a fast-paced, rapidly changing environment., • Work independently and within a team to perform all tasks as assigned and in a timely manner., • Meet associate performance expectations, including, but not limited to, attendance, personal appearance, safety, and respectful workplace., • Operate Point-of-Sale (POS) computer system., • Possess basic mathematics (addition, subtraction, multiplication, division, currency) and alphabetizing skills., • Complete required paperwork properly., • Carry out instructions furnished in written, oral or diagram form., • Execute financial tasks in strict accordance with company policy., • Work a flexible schedule, including extended hours/days as necessary, including nights, weekends, and some holidays. Minimum of 3 days/week availability., • Constructively manage pressure and adapt to stressful situations without impact on guest interactions; be creative and a problem solver., • Be reliable and trustworthy; always use good judgment., • Able to work alone. Stand and move throughout the store unassisted for up to 12 hours per day., • Bend, stoop, crouch, balance, stretch, reach with arms/hands, climb on ladders, lift merchandise weighing up to 30 lbs. from ground level to minimum height of 4 feet, and utilize other basic fine and gross motor skills., • Possess or acquire during employment onboarding a working understanding of military ranks and related insignia (applies only to positions in stores located on military bases). Job descriptions are subject to change at any time based on business conditions/needs, including changes to the essential job duties, qualifications, and/or key job skills and abilities consistent with the position’s purpose. GameStop provides equal employment opportunities to all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status. GameStop provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law. *Certain state-specific exceptions may apply. This position accepts applications on an ongoing basis. Candidates should express their interest by clicking APPLY. Disclaimer: GameStop provides equal employment opportunities to applicants and employees without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status. GameStop provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law. GameStop and its affiliated businesses reserve the right to change job descriptions at any time based on business conditions/needs, which includes expanding this job’s responsibilities and assigning additional duties consistent with the position’s purpose. Benefits: Full-time store positions at GameStop are eligible to participate in incentive programs, 401(k), paid time off, dental, vision, and health insurance. Positions at GameStop may also be eligible for a bonus and/or other incentives. Pay Range: $19.65-$23.65

Preferred Healthcare Staffing is seeking a travel Outpatient Physical Therapist for a travel job in Valencia, California. Job Description & Requirements • Specialty: Physical Therapist, • Discipline: Therapy, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, • Employment Type: Travel Physical Therapist (PT) - Outpatient PT Job Summary: We are looking for a talented Physical Therapist with outpatient experience to work at an excellent healthcare facility in Valencia, California. This is a fantastic opportunity to build upon your physical therapy skills while advancing your PT career. The job will entail providing therapy and rehabilitation services to patients at the facility. You care about patients and are committed to helping them recover from their physical ailments. You will work with new and ongoing patients to create individualized plans of treatment that consist of appropriate exercises, procedures, and techniques to promote effective and safe recovery. Job Responsibilities: • Demonstrate clinical reasoning while evaluating patients, identifying diagnosis, and developing a comprehensive plan of care., • Perform age-appropriate competency skills in area of practice and with respect to individual patient’s problems., • Follow intervention protocols and alter plan of care appropriately., • Document patient progress according to approved medical and facility documentation procedures., • Discharge patient when goals have been met or medical necessity no longer warrants intervention., • Work cooperatively with supervisors and peers to contribute to the overall productivity of the team. Job Requirements: • Active state license as a physical therapist, • Current BLS/CPR certification, • 6 months of PT experience within the last 5 years What We Offer: • Competitive pay package, • Medical, dental, vision, and 401(k) matching, • Retirement planning and savings options, • Continuing Education reimbursement, • Ability to make an impact in the communities we serve #featured opportunity Preferred Healthcare is a well-established and highly reputable staffing agency that specializes in placing therapy and allied health professionals in positions carefully aligned with their skills and career goals. We pride ourselves on honesty, building lasting relationships, and genuinely taking care of our HCPs. We believe this helps to achieve our mutual goal: better patient care. Awarded Best of Staffing (6 years straight!) and Certified by The Joint Commission. For immediate consideration, please call or apply to this job. Preferred Healthcare Staffing is an Equal Opportunity Employer We are committed to the hiring, advancement and fair treatment of all individuals and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other protected status as designated by federal, state, or local law. Preferred Healthcare Staffing Job ID #1191423. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Preferred Healthcare Staffing “We care for you, so you can care for others” When you decide to join Preferred, you get a partner working tirelessly by your side to ensure all your needs are met. From the outset and throughout your tenure with us, you’ll receive personalized service and be treated with kindness and respect. This exclusive treatment is what distinguishes us from the rest. Don’t just take our word for it, Preferred has won ClearlyRated’s Best of Staffing in both Client and Talent Satisfaction for eight straight years, earning us the coveted diamond award in each category. Experience the Preferred touch today! Benefits • Medical benefits, • Dental benefits, • Vision benefits, • 401k retirement plan

Job Description Job Summary Machine shop lead will have expert-level ability to set up, run, and troubleshoot all site-specific CNC mill, lathe and conventional machines and machining processes. In addition to machining responsibilities, that machine shop lead will provide leadership, mentoring, and hands-on training to lower-level machinists. Play a key role in cross-training, troubleshooting, and supporting area leadership Job Responsibilities: • Responsible for all facets of production including set-up to FA acceptance, • Performs and maintains accurate in process quality inspections, • Provide cross-training flexibility across all machining platforms and departments., • Independently troubleshoot machining problems and assist other machinists as needed., • Must be proficient across a broad range of equipment and can independently manufacture and validate complex tooling., • Design, manufacture, and validate tooling for production needs., • Lead process improvement efforts within the area., • Mentor and train lower-level machinists, supporting their development and growth., • Act as a subject matter expert and area lead when necessary., • Additional duties may be assigned at the discretion of management to meet operational needs. Requirements: • Advanced experience across multiple CNC and conventional machining platforms., • Expert knowledge of tooling, setup, program validation, and machine recovery., • Demonstrated leadership and mentoring capabilities., • Strong problem-solving skills applied to a wide range of production challenges., • Intermediate knowledge of CAD/CAM software., • Ability to lift up to 50 lbs., • Must be able to read and interpret blue prints, specifications and shop aid sketches, • Ability to handle complex situations and solve complex problems, • Ability to work effectively under pressure to meet deadlines, • Ability to press and analyze technical and business information, • Ability to work in a team environment with strong communication skills (verbal and written), • Professionalism, integrity, and exceptional attention to detail, • Excellent interpersonal, written, and verbal communication skills, • Must be detail oriented, organized, and self-motivated Qualifications: • 5+ years of experience in a machining role., • 2+ years in leadership role, • Experience with Haas and Fadal controls, • Intermediate knowledge of CAD/CAM software., • Proven success in mentoring, training, or leading others on the shop floor. WORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and standing for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical manufacturing shop floor conditions, directly working with Manufacturing management team and external customers. Other Factors: Typical hours worked are Monday – Friday from 6:00 a.m. – 03:00 p.m. Incumbents are currently required to work occasional extended hours and weekend overtime, as applicable by law. Frequently required to use hands or fingers, handle, or feel objects, tools, or controls. Often required; reach with hands and arms; and stoop. Occasionally required to; climb or balance; kneel, crouch, or crawl. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high.

Job DescriptionShipping & Receiving Specialist Location: Valencia, CA (On-Site) Department: Supply Chain Status: Full-Time, Non-Exempt About the Role We are seeking a detail-oriented and organized Shipping & Receiving Specialist to join our Supply Chain team in Valencia, California. This fully on-site position plays a critical role in ensuring the accurate processing of incoming and outgoing shipments, maintaining shipping documentation, and supporting inventory accuracy. The ideal candidate is highly organized, customer-focused, and enjoys working in a fast-paced environment where precision and efficiency are essential. Key Responsibilities • Receive, inspect, and verify incoming shipments against purchase orders and packing slips., • Document and report discrepancies, shortages, or damaged materials., • Prepare outgoing shipments, ensuring accurate packaging, labeling, and shipping documentation., • Perform quality inspections on received products to ensure compliance with company standards., • Maintain accurate shipping, receiving, and inventory records within company systems., • Coordinate with internal departments, vendors, and carriers to resolve shipment-related issues., • Identify opportunities to improve shipping and receiving processes and implement best practices to enhance efficiency and accuracy., • Ensure compliance with company procedures and established shipping standards., • Provide excellent customer service when addressing shipping and receiving inquiries and concerns. QualificationsRequired Qualifications, • High school diploma or equivalent., • Minimum of 2 years of experience in shipping, receiving, logistics, inventory control, or a related field., • Strong understanding of shipping and receiving operations, including order verification, documentation, and packaging standards., • Experience maintaining accurate shipment and receiving records., • Strong attention to detail and commitment to accuracy., • Excellent organizational and time management skills., • Ability to prioritize multiple tasks and meet deadlines., • Strong interpersonal, verbal, and written communication skills., • Ability to work independently and collaboratively in a team environment., • Customer-service mindset with the ability to resolve issues professionally and effectively. Preferred Qualifications, • Experience working in a manufacturing, medical device, distribution, or supply chain environment., • Associate's or Bachelor's degree in Business, Supply Chain, Logistics, or a related field., • Experience using inventory management or ERP systems. Skills & Competencies, • Exceptional attention to detail and accuracy., • Strong problem-solving and analytical skills., • Ability to handle confidential information appropriately., • Effective planning and organizational skills., • Ability to manage multiple priorities in a fast-paced environment., • Strong relationship-building skills and ability to work cross-functionally., • Ability to make sound decisions and exercise good judgment with minimal supervision. Work Environment & Physical Requirements This is a full-time, on-site position located in Valencia, CA. Remote and hybrid work arrangements are not available. The role is primarily office-based and includes regular use of computers and shipping-related systems. Responsibilities may require occasional standing, walking, bending, reaching, and lifting items up to 10 pounds. Candidates must be able to review shipping documents, labels, inventory records, and communicate effectively with coworkers, vendors, and customers. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the position. Equal Opportunity Employer TriMed is an Equal Opportunity Employer and considers all qualified applicants for employment without regard to race, color, religion, creed, national origin, ancestry, disability, sex, sexual orientation, gender identity, age, citizenship, marital status, veteran status, or any other protected status under applicable law.

Job Description Strategic Account Manager – Medical Device Sector Full Time + Benefits (Medical, Dental, Vision, 401k with Company Match, PTO) Job Type: Hybrid Travel Requirements: 30% to 40% Salary Range: $130,000.00 - $160,000.00 Location: Remote – servicing multiple locations Fralock is an engineered solutions provider of specialty components and subassemblies using advanced materials for high reliability, severe environment, and technically challenging applications. We develop and manufacture custom integrated solutions. Established in 1967, we are a critical solutions provider to Fortune 500 corporations, government, and targeted OEMs in a variety of industries including Semiconductor Equipment Manufacturing, Medical and Life Science, Aerospace and Defense, Industrial, Electronics, and Energy. Fralock is headquartered in Valencia, CA with manufacturing locations located throughout Northern and Southern California. VISION To be recognized by our customers as a leading solutions provider of proprietary engineered advanced materials for high reliability, severe environment, and technically challenging applications. MISSION To create value, profitably grow, and share our success with all stakeholders. CULTURE • Respect – We treat others the way they want to be treated., • Integrity – We practice a high standard of ethics in our business dealings with customers, suppliers, and employees., • Responsiveness – We have a sense of urgency in responding to internal and external requests and work proactively to solve problems., • Excellence/Competence – We empower our people to continuously improve and execute high quality work., • Teamwork – We work together to achieve Fralock business objectives by communicating at a high level, by listening and having clarity in our expectations of one another., • Individual Accountability and Personal Responsibility – We do what we have committed to do when we committed to doing it., • Continuous Improvement across all segments of the company This position requires access to information controlled under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR), the successful candidate must be a "U.S. person" as defined in the ITAR and EAR (which generally means (i) be a citizen or national of the United States; or (ii) be a lawful permanent resident of the United States; or (iii) have been admitted to the United States as a refugee, or have been granted asylum, as specified under applicable law. Job Summary Strategic Account Manager (SAM) develops, maintains and expands relationships with multiple accounts and is accountable for achieving assigned strategic objectives. This role represents the entire range of company products and services to targeted accounts at the engineering and commercial levels while ensuring that customer needs and expectations are met or exceeded. The position requires technical aptitude in the areas of materials, manufacturing and applications. Customer analysis, reporting, strategy development and execution are key aspects of this role. Additionally, the role requires collaboration with internal colleagues and the management of Opportunities (i.e. Projects) at various stages of the product life cycle. The SAM is tasked with growing the business (and Fralock's presence) by uncovering new opportunities within targeted customers, submarkets and the like. Additionally, the focus is on selling the full line of products and services, driving revenue growth by prospecting (for new), building relationships, penetrating accounts and becoming a resource at the engineering level. Total engagement with the account is expected during the sales cycle while drawing upon necessary company resources as needed to properly support customers. Managing the B2B relationships as required (vendors, customers, representatives, etc.) Key Responsibilities • Supporting customer engineering departments in both new and existing opportunities (projects)., • Scheduling and making sales calls to promote Fralock's capabilities/offerings and making technical presentations on a scheduled frequency., • Developing new contacts with the customer and recording their contact information in our CRM system., • Gathering of Requirement Definitions for new applications, revision changes to facilitate the Design Development process., • Will be involved in other areas of account management, specifically generating monthly, quarterly and annual account plan updates., • Assist with project/program management as needed., • Account penetration at the engineering level and commercial level., • Obtain pertinent customer information such as reporting structure, next generation programs, competitive landscape, and other business intelligence. Also, present and capture this information in CRM and formal management presentations (PPT)., • Increase revenue and profit margins through the development of new business (new parts, new customers)., • Increase application knowledge to improve problem-solving capabilities., • Prepare reports (sales, forecasts, month end, etc.)., • Responsible for developing relationships up and down the 'food chain" in engineering, purchasing, supply chain, and management., • Proactive involvement in quotation, product development [Design & Development], and sampling activities., • Coordinating customer interactions including joint sales calls, technical presentations, Business Review Meetings, customer onsite visits and the like., • And other related functions that support customer intimacy, customer satisfaction and business development. Required Skills • Strong salesmanship skills,, • Excellent communication skills: listening, written and verbal,, • Proficient with MS Office tools (Word, Excel, PPT),, • "Engineered Application" selling experience,, • Professional business acumen,, • Experience with CRM software (Salesforce preferred),, • Valid Driver’s License, Insurance and Acceptable driving record, • Minimum 5 years selling into Medical Device OEMs. This is MANDATORY Preferred Skills • Industry experience in selling engineered solutions including seals, gaskets, flexible/Rigid-Flex circuit assemblies and ceramics into Medical Device companies such as Abbott, Boston Scientific, Edwards Life Science, GE Healthcare, Medtronic, Siemens, and the like., • Materials knowledge in one or more of the following: films, foils, foams, elastomers, polymers, ceramics., • Proven track record of penetrating customer organizations, • High Emotional Intelligence Experience Requirements • 5 - 10 years of work-related experience Education Requirements • HS Diploma AND Bachelors Degree in Engineering (i.e. Electrical, Mechanical), or Technical Degree, or minimum of 10 years experience in a Technical Sales Role Physical Requirements • Trade show set/dismantle requiring some lifting (up to 35 lbs.) All offers of employment at Fralock are contingent upon clear results of a background check. Background checks may include some or all the following depending on job title and responsibilities: • Social Security Verification, • Prior Employment Verification, • Criminal History, • Personal and Professional References, • Motor Vehicle Records Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of a position. Fralock provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

CDL-A Truck Driver Jobs Open in Your Region! EXCELLENT EARNINGS POTENTIAL, HOME TIME TO FIT YOUR LIFE, AND MORE! Apply Now or Call to Speak to a Recruiter ☎ 855-865-9704 Job Description: CDL-A Truck Drivers- Join a 2-Time TCA Elite Fleet Are you looking for a CDL-A truck driving job with reliable miles and a driver-first culture? Marten Transport - a back-to-back TCA Elite Fleet honoree (2025 & 2026) - is urgently hiring CDL-A truck drivers to join one of the industry's most stable and financially independent fleets that puts drivers first. From dependable schedules to competitive pay and modern equipment, Marten continues to set the standard for what drivers should expect from a carrier. Advantages and earnings include: $1,250-$1,700 weekly pay range Earn $65,000-$89,000+/year $1,000 sign-on bonus! Driver Comfort : Late-model equipment with APU's, automatic transmissions & Invertors on all tractors Consistent routes with plenty of miles Potential for additional detention pay (from 0 to $160 per 24-hour period ) Potential for additional inclement weather pay (from 0 to $150 per day) Potential for additional layover pay (from 0 to $150 per day) Potential for additional referral bonus (from 0 to $2,500 per referral with unlimited earning potential) Additional Benefits: Guaranteed minimum pay Health, Dental, Vision Insurance options FREE Lifeworks Program for you and your family-resources for Mental Health , Parenting, Education, Financial, Legal and so much more ! 401k with company match FREE CPAP testing and supplies Pet Policy - bring your furry companion FREE Rider Program - see the country together! Up to $2,500 Driver Referral Program - unlimited earning potential Hiring bonus PTO • relax, you deserve it! Employee Discount Program Disability Insurance Flexible Spending account - be financially ready for medical emergencies Health Savings Account Company Paid Life Insurance Long-term stability with a secure company Qualifications: A current Interstate Commercial Driver's License (Class A) Must have at least 6 months of recent CDL-A experience with one carrier after completing training Ability to work and interact with others Background check required. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act, Fair Credit Reporting Act, or other applicable law. Marten will make an individualized assessment of whether your conviction history has a direct or adverse relationship with the specific duties of the job, and consider potential mitigating factors, including, but not limited to, evidence and extent of rehabilitation, recency of the offense(s), and age at the time of the offense(s). Expect the best when you join Marten Transport APPLY NOW! Complete the short application form below or call and speak to a recruiter to learn more. ☎ 855-865-9704

Description Providence nurses are not simply valued - they're invaluable. You will thrive in our culture of patient-focused, whole-person care built on understanding, commitment, and mutual respect. Your voice matters here, because we know that to inspire and retain the best nurses, we must empower them. Learn why nurses choose to work at Providence by visiting our Nursing Institute page. Join our team at Providence Facey Medical Foundation. As a Providence caregiver, you'll apply your specialized training to deliver world-class health with human connection and make a difference every day through your extraordinary care. Required Qualifications: • Graduate of an accredited LVN school of nursing, • Upon hire: California Licensed Vocational Nurse, • Within 30 days of hire: National Provider BLS - American Heart Association, • 2 years of current medical office experience, with references Why Join Providence? Our best-in-class benefits are uniquely designed to support you and your family in staying well, growing professionally, and achieving financial security. We take care of you, so you can focus on delivering our Mission of caring for everyone, especially the most vulnerable in our communities. About Providence At Providence, our strength lies in Our Promise of "Know me, care for me, ease my way." Working at our family of organizations means that regardless of your role, we'll walk alongside you in your career, supporting you so you can support others. We provide best-in-class benefits and we foster an inclusive workplace where diversity is valued, and everyone is essential, heard and respected. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. As a comprehensive health care organization, we are serving more people, advancing best practices and continuing our more than 100-year tradition of serving the poor and vulnerable. Posted are the minimum and the maximum wage rates on the wage range for this position. The successful candidate's placement on the wage range for this position will be determined based upon relevant job experience and other applicable factors. These amounts are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities. Providence offers a comprehensive benefits package including a retirement 401(k) Savings Plan with employer matching, health care benefits (medical, dental, vision), life insurance, disability insurance, time off benefits (paid parental leave, vacations, holidays, health issues), voluntary benefits, well-being resources and much more. Learn more at providence.jobs/benefits. Applicants in the Unincorporated County of Los Angeles: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Unincorporated Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. About the Team The Sisters of Providence and Sisters of St. Joseph of Orange have deep roots in California, bringing health care and education to communities from the redwood forests to the beach shores of Orange county - and everywhere in between. In Southern California, Providence provides care throughout Los Angeles County, Orange County, High Desert and beyond. Our award-winning and comprehensive medical centers are known for outstanding programs in cancer, cardiology, neurosciences, orthopedics, women's services, emergency and trauma care, pediatrics and neonatal intensive care. Our not-for-profit network provides a full spectrum of care with leading-edge diagnostics and treatment, outpatient health centers, physician groups and clinics, numerous outreach programs, and hospice and home care, and even our own Providence High School. Providence is proud to be an Equal Opportunity Employer. We are committed to the principle that every workforce member has the right to work in surroundings that are free from all forms of unlawful discrimination and harassment on the basis of race, color, gender, disability, veteran, military status, religion, age, creed, national origin, sexual identity or expression, sexual orientation, marital status, genetic information, or any other basis prohibited by local, state, or federal law. We believe diversity makes us stronger, so we are dedicated to shaping an inclusive workforce, learning from each other, and creating equal opportunities for advancement. Requsition ID: 438793 Company: Providence Jobs Job Category: Nursing-Patient Facing Job Function: Nursing Job Schedule: Full time Job Shift: Day Career Track: Nursing Department: 7011 PEDIATRIC CA PFMF CANYON COUNTRY Address: CA Canyon Country 14550 Soledad Canyon Rd Work Location: Facey Canyon Country I-Canyon Country Workplace Type: On-site Pay Range: $32.58 - $49.84 The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities.

Job Description Description: If you need work ASAP and have Warehouse or Packing experience then this is the position for you! A popular company in Valencia is looking for Warehouse Clerks and Packers to join the team! Aerotek will provide a rapid interview process so you start work as soon as possible! Skills: Packing / Warehouse / Order picking Experience Level: Entry - Expert Level Location: Valencia Pay / Shift : $17.81 Mon-Fri 1st shift: 8am - 4:30pm Apply right now and expect a call/text from a recruiter with Aerotek😊. Positions with this company will be filled quickly Job Type & Location This is a Contract position based out of Valencia, CA 91355. Pay and Benefits The pay range for this position is $17.00 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Valencia,CA 91355. Application Deadline This position is anticipated to close on Jul 7, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Description Under the general direction of the Patient Care Delivery Director, supervises and coordinates the patient care support staff. Develops and implements quality improvement programs; ensures efficient allocation and use of resources. Age(s) of Patients Served: Birth and above. Providence caregivers are not simply valued - they're invaluable. Join our team at Providence Facey Medical Foundation in our culture of patient-focused, whole-person care built on understanding, commitment, and mutual respect. Your voice matters here, because we know that to inspire and retain the best people, we must empower them. Required Qualifications: • Graduate of an accredited LVN school of nursing., • Upon hire: California Licensed Vocational Nurse, • Within 30 days of hire: National Provider BLS - American Heart Association, • 2 years Current medical office experience with references., • 2 years Nursing staff supervisory experience in a patient care delivery setting. Why Join Providence? Our best-in-class benefits are uniquely designed to support you and your family in staying well, growing professionally, and achieving financial security. We take care of you, so you can focus on delivering our Mission of caring for everyone, especially the most vulnerable in our communities. About Providence At Providence, our strength lies in Our Promise of "Know me, care for me, ease my way." Working at our family of organizations means that regardless of your role, we'll walk alongside you in your career, supporting you so you can support others. We provide best-in-class benefits and we foster an inclusive workplace where diversity is valued, and everyone is essential, heard and respected. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. As a comprehensive health care organization, we are serving more people, advancing best practices and continuing our more than 100-year tradition of serving the poor and vulnerable. Posted are the minimum and the maximum wage rates on the wage range for this position. The successful candidate's placement on the wage range for this position will be determined based upon relevant job experience and other applicable factors. These amounts are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities. Providence offers a comprehensive benefits package including a retirement 401(k) Savings Plan with employer matching, health care benefits (medical, dental, vision), life insurance, disability insurance, time off benefits (paid parental leave, vacations, holidays, health issues), voluntary benefits, well-being resources and much more. Learn more at providence.jobs/benefits. Applicants in the Unincorporated County of Los Angeles: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Unincorporated Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. About the Team The Sisters of Providence and Sisters of St. Joseph of Orange have deep roots in California, bringing health care and education to communities from the redwood forests to the beach shores of Orange county - and everywhere in between. In Southern California, Providence provides care throughout Los Angeles County, Orange County, High Desert and beyond. Our award-winning and comprehensive medical centers are known for outstanding programs in cancer, cardiology, neurosciences, orthopedics, women's services, emergency and trauma care, pediatrics and neonatal intensive care. Our not-for-profit network provides a full spectrum of care with leading-edge diagnostics and treatment, outpatient health centers, physician groups and clinics, numerous outreach programs, and hospice and home care, and even our own Providence High School. Providence is proud to be an Equal Opportunity Employer. We are committed to the principle that every workforce member has the right to work in surroundings that are free from all forms of unlawful discrimination and harassment on the basis of race, color, gender, disability, veteran, military status, religion, age, creed, national origin, sexual identity or expression, sexual orientation, marital status, genetic information, or any other basis prohibited by local, state, or federal law. We believe diversity makes us stronger, so we are dedicated to shaping an inclusive workforce, learning from each other, and creating equal opportunities for advancement. Requsition ID: 439354 Company: Providence Jobs Job Category: Patient Care (Non-Acute) Job Function: Clinical Care Job Schedule: Full time Job Shift: Day Career Track: Leadership Department: 7011 ADMIN PFMF CORP 3 Address: CA Valencia 23803 McBean Pkwy Work Location: Facey Valencia II-Valencia Workplace Type: On-site Pay Range: $40.89 - $63.48 The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities.

Job Description Position: Barista Our Blend: Born and brewed in Southern California since 1963, The Coffee Bean & Tea Leaf® has become one of the world’s largest specialty coffee and tea retailers. Today we have global presence with Cafés around the world and offices in California, Singapore and Malaysia. As we grow our brand, we are committed to maintaining our values, heritage and passion for our products. We have always had a creative and caring spirit. This energy embodied by our Team Members made us famous and beloved by our guests, first in Southern California and now around the world. We are a brand centered around passion. A passion for our premium products, our people and our customers. Passion is contagious, and we’ve got a serious case of it. If you are just as passionate as we are, come join our Brew Crew!! The position we are brewing: Do you love premium Coffee & Tea? Do you want to work for a socially responsible, guest service driven company? The Coffee Bean & Tea Leaf® Barista curates memorable experiences for our guests and the CBTL team daily. We are seeking friendly, dedicated, and creative Barista’s to provide our guests with the world’s finest quality coffee and tea experience. As a member of our team, you will have the opportunity to engage with guests while developing your skills in a variety of areas across the business. Many of our General Managers started off as Baristas! If you are looking for an opportunity where you can be yourself and have fun doing it, while creating a base of loyal CBTL fans out of the local community, we want to talk to you about joining our growing and diverse team. What you will Measure and Blend: • Be a warm host- guide guests through their coffee experience from beginning to end providing exceptional guest service throughout, • Create coffee moments- share your knowledge, our coffee, and our sustainability practices with guests., • Be a coffee & tea expert. You bring the passion, we provide the training, and you share it with the guest., • Generate new guests. Many guests shop online these days; however, the store is where we meet many of our guests for the first time., • Care about safety. Safe, healthy employees and guests are our number one priority., • Contribute. Take pride in the tidiness of your store, organize stock, innovate new way to do things. Take initiative with tasks, ideas and add to the overall success Your Ingredients: • At The Coffee Bean & Tea Leaf, we hire for our core values Friendliness / Respect / Ownership / Teamwork / Honesty — FROTH and identify team members who share these values. Perks: • Discounts on our Coffee and Tea, • Medical, Dental, Vision as applicable, • Pay Range: $20.00-$22.00 Hourly (Based on minimum wage ordinance and experience.), • Observed Holidays, • Sick Pay, • Referral bonus program, • Flexible Uniforms, • Retirement Plan, • Life Assistance Program, • 24 Hour Fitness Discount, • Flexible Schedule, • Fun Environment., • Working Advantage Discount Program This role may be subject to the following working conditions: • Climbing, • Balancing, • Stooping, • Kneeling, • Crouching, • Reaching, • Standing, • Walking, • Pushing, • Pulling, • Lifting, • Grasping, • Feeling (Tangible), • Talking, • Hearing, • Repetitive Motion, • Sitting, • Medium work - Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects., • The worker is subject to both environmental conditions. Activities occur inside and outside., • The worker is subject to extreme cold. Temperatures typically below 32 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity., • The worker is subject to extreme heat. Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity., • The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level., • The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts and moving vehicles., • The worker is required to function in narrow aisles or passageways. International Coffee & Tea, LLC dba The Coffee Bean & Tea Leaf® is fully committed to Equal Employment Opportunity and to attracting, retaining, developing and promoting the most qualified employees without regard to their race, sex, gender, color, religion, sexual orientation, national origin, age, physical or mental disability, citizenship status, veteran status, genetics, or any other status protected by state or federal law. The Coffee Bean &Tea Leaf® expressly prohibits any form of employee harassment or discrimination on the basis of any such protected status. The Coffee Bean & Tea Leaf® provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, sex, color, religion, gender, sexual orientation, national origin, age, disability, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. This policy was intended to comply, and The Coffee Bean & Tea Leaf® so complies, with applicable state and local laws governing non-discrimination in employment in every location in which the Company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. We are dedicated to providing a work environment free from discrimination and harassment, and where employees are treated with respect and dignity. We use eVerify to confirm U.S. Employment eligibility.

About ITT: ITT Inc. (NYSE: ITT) is a diversified global leading manufacturer of highly engineered critical components and customized technology solutions serving the flow, aerospace and defense, transportation, industrial, and energy markets. Through operational execution, innovation, and disciplined capital deployment, including strategic acquisitions such as SPX FLOW, ITT partners with its customers to deliver enduring solutions to the key industries that underpin our modern way of life. Headquartered in Stamford, Connecticut, ITT has a market cap of roughly $20 billion and employs more than 15,000 people across 40 countries and serves customers in approximately 125 countries. Following the acquisition of SPX FLOW, the company is expected to generate $5.4 billion in annual revenue. Our businesses are organized in three distinct segments, each based around our core engineering DNA: Flow Technologies: A global leader in, providing a broad portfolio of pumps, valves, mixing and agitation equipment, heat transfer, homogenizers, separation, water and wastewater treatment, and engineered process solutions.Our leading brands include the iconic Goulds Pumps (with more than 175 years of history), Anhydro, APV, Bornemann, Bran+Luebbe, C'treat, Engineered Valves, Gerstenberg Schröder, Goulds Pumps, Habonim, Johnson Pump, Lightnin, Philadelphia, Plenty, PRO Cast, Rheinhütte, Seital Separation, Stelzer, Svanehøj, Tigerholm, Uutechnic, VIDAR, Waukesha Cherry-Burrell. Motion Technologies: A global leader in brake pads (ICE and electrified brake pads) and shock absorbers (energy absorption solutions) for transportation applications. Our leading brands include Friction Technologies, KONI and Axtone. Connect and Control Technologies: A leader in critical applications for the aerospace, defense and industrial markets, including harsh environment connectors and control components. Our leading brands include ITT Cannon, Enidine, Aerospace Controls and kSARIA. Position Summary ITT Control Technologies offers a very attractive benefits program. Our employees enjoy medical and dental coverage, a company paid retirement plan, 401 K savings plan, life insurance protection, sickness and accident income protection, a generous vacation and holiday program, a tuition reimbursement program, and a program that allows you to use tax-free dollars to pay for many health care and dependent care expenses. The quality control inspector position conducts in-process and final inspection of various products such as valves, actuators, switches, and pumps. Perform visual and dimensional examination using basic inspection equipment, under direct supervision of Quality Control Supervisor. This is a weekend shift position (Friday - Sunday) hours 6am to 6pm. Essential Responsibilities • Inspect products using gauges, scales, and vision at receiving inspection, in process inspection, and prior to shipment, • Generate first article reports per AS9102, • Reconcile and review all final inspection documentation for shipments, • Interact with source inspectors and customers as needed, • Review of customer purchase orders for quality requirement flow downs, • Verifies conformance of products to specifications, • Work with cross functional engineering teams to address any non-conformance's, • Record inspection results accurately on inspection report and in databases, • Basic understanding of geometric dimensioning and tolerancing, • Make acceptance or rejection decisions based on established procedures, • Performs visual and dimensional measurements of purchased components using microscopes, micrometers, dial calipers, and other precision measurement equipment, • Establish appropriate inspection setups using the equipment available, • Follows company safety policies and procedures while ensuring quality work, • Tolerance measurement techniques, with the ability to interpret engineering specifications Position Requirements • Inspectors must understand, read, and write English, • Blueprint & Technical Drawing Interpretation, • GD&T Fundamentals, • CMM & Precision Measurement Tools experience is required, • Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents., • Proficient use/interpretation of Component Maintenance Manuals., • Strong written and verbal communication skills., • Must be able to effectively prioritize tasks, • Strong computer skills. Proficient with Microsoft Word, • High school diploma or GED, • 5+ years of professional experience, • Experience in AS9100 aerospace environment preferred, • First article experience for AS9102 is preferredRequired Weekend Shift: Employees must be available to work on a weekend schedule consisting of Friday, Saturday, and Sunday from 6:00 a.m. to 6:00 p.m. Shift Differential: This shift includes an additional $1.50 per hour differential. Safety is a core value at ITT. Our employees understand and follow all ITT safety policies and procedures, participate in workplace inspections, safety training, and in the development of job safety analyses. Other Requirements:This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee or Refugee). "ITT Corporation is an Equal Opportunity/Affirmative Action employer and all qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status, or any other characteristic protected by law." #CCT1 Equal Pay Act Statement We aim to pay our 'ITT'ers' fairly and competitively in the locations that they live and work. Pay-for-performance is a principle that we believe in, and employees are rewarded based not only on 'what' they accomplish, but also on 'how' they reflect ITT's values. ITT offers a competitive salary and robust total rewards package, such as health insurance, 401(k), short and long-term disability, paid time off, growth and developmental opportunities, and other incentive compensation programs. Specific benefits are dependent upon whether or not the position is part of a collective-bargaining agreement. The salary offered to a candidate is based several factors such as candidate experience and qualifications, location, as well as market and business considerations. Equal Pay Act Range Min. $25.19/hr. to Max. $37.40/hr.

About ITT: ITT Inc. (NYSE: ITT) is a diversified global leading manufacturer of highly engineered critical components and customized technology solutions serving the flow, aerospace and defense, transportation, industrial, and energy markets. Through operational execution, innovation, and disciplined capital deployment, including strategic acquisitions such as SPX FLOW, ITT partners with its customers to deliver enduring solutions to the key industries that underpin our modern way of life. Headquartered in Stamford, Connecticut, ITT has a market cap of roughly $20 billion and employs more than 15,000 people across 40 countries and serves customers in approximately 125 countries. Following the acquisition of SPX FLOW, the company is expected to generate $5.4 billion in annual revenue. Our businesses are organized in three distinct segments, each based around our core engineering DNA: Flow Technologies: A global leader in, providing a broad portfolio of pumps, valves, mixing and agitation equipment, heat transfer, homogenizers, separation, water and wastewater treatment, and engineered process solutions.Our leading brands include the iconic Goulds Pumps (with more than 175 years of history), Anhydro, APV, Bornemann, Bran+Luebbe, C'treat, Engineered Valves, Gerstenberg Schröder, Goulds Pumps, Habonim, Johnson Pump, Lightnin, Philadelphia, Plenty, PRO Cast, Rheinhütte, Seital Separation, Stelzer, Svanehøj, Tigerholm, Uutechnic, VIDAR, Waukesha Cherry-Burrell. Motion Technologies: A global leader in brake pads (ICE and electrified brake pads) and shock absorbers (energy absorption solutions) for transportation applications. Our leading brands include Friction Technologies, KONI and Axtone. Connect and Control Technologies: A leader in critical applications for the aerospace, defense and industrial markets, including harsh environment connectors and control components. Our leading brands include ITT Cannon, Enidine, Aerospace Controls and kSARIA. Position Summary ITT Control Technologies offers a very attractive benefits program. Our employees enjoy medical and dental coverage, a company paid retirement plan, 401 K savings plan, life insurance protection, sickness and accident income protection, a generous vacation and holiday program, a tuition reimbursement program, and a program that allows you to use tax-free dollars to pay for many health care and dependent care expenses. Position Summary The Machinist operates and sets up a variety of machines such as CNC lathes, CNC mills, CNC mill turn, and setup machines with quick change tooling and checks own work for conformance to specifications. The Machinist inspects and verifies their own work to ensure quality standards are met, while maintaining efficiency, accuracy, and safe operating practices. Essential Responsibilities • Checks CNC machines to ensure proper raw material is loaded in bar feeds based on individual setup sheets., • Checks and fills CNC machines to ensure coolant tanks are full and at correct viscosity levels using a refractometer, • Modify speeds and feeds as necessary, • Operate two or more machines at one time., • Run cells with gear machines and other manual equipment., • Setup machines with quick change tooling., • Work from blueprints, plans methods and sequences of machining to produce quality parts to conform to specifications., • Checks own work for conformance to specifications., • Identify and stocking raw materials., • Bench drills small diameters and inspecting work to ensure compliance., • Operate tumbler, wash, debur drill press and other simple equipment., • Actively participate in safety and continuous improvement and processes needed to ensure production is efficient, compliant, and meets quality standards. Position Requirements • Minimum 5 years CNC machine shop experience as a machinist operating CNC machine., • High School diploma or GED or trade school certification., • Must be able to remain the setup., • Ability to lift 25lbs frequently and up to 50lbs occasionally, • Must be capable of working and maintaining tolerances within .0002" in a high-pressure, fast-paced, quality-oriented environment., • Mathematics - General machine shop math: fractions, percentages, ratios, and proportions to practical situations., • Production and Processes - Knowledge of raw materials, production processes, quality control and other techniques for maximizing the effective manufacture of goods., • Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly., • Required to work weekend shift (Friday, Saturday, Sunday) schedule 6 am to 6 pmSafety is a core value at ITT. Our employees understand and follow all ITT safety policies and procedures, participate in workplace inspections, safety training, and in the development of job safety analyses. Other Requirements:This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee or Refugee). "ITT Corporation is an Equal Opportunity/Affirmative Action employer and all qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status, or any other characteristic protected by law." Equal Pay Act Statement We aim to pay our 'ITT'ers' fairly and competitively in the locations that they live and work. Pay-for-performance is a principle that we believe in, and employees are rewarded based not only on 'what' they accomplish, but also on 'how' they reflect ITT's values. ITT offers a competitive salary and robust total rewards package, such as health insurance, 401(k), short and long-term disability, paid time off, growth and developmental opportunities, and other incentive compensation programs. Specific benefits are dependent upon whether or not the position is part of a collective-bargaining agreement. The salary offered to a candidate is based several factors such as candidate experience and qualifications, location, as well as market and business considerations. Equal Pay Act Range Min. $21.15 to Max. $31.44

Solderer (Senior Assembler) We have a great opportunity for a Solderer (Senior Assembler) to join our center of excellence in Santa Clarita, CA! As our Senior Assembler you will follow process instructions and blueprints to assemble components and achieve final configuration required on drawings for the production of the company's products. Location: Santa Clarita, CA Salary Range: $ 21.01 to $27.98 per hour Please note that the salary range information provided is a general guideline only, reflecting a position based in California. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture Your Challenge: • Assemble components to a final configured product utilizing process and drawing instructions and blueprints and specialized tooling and fixtures, measuring equipment and hand tools., • Reads and interprets assembly drawings, parts lists, operations sheets and visual aids., • Set up and operate machines, tooling and test equipment and perform any rework from test failures in accordance with standard repair procedures. May also incorporate ECN's into completed boards and perform and record measurements., • Verify quality of product at the required intervals and verify accuracy of all work., • Ability to operate material handling equipment, read and interpret blueprint, layout, and process worksheets, set-up and operate assigned machines and equipment, and effectively communicate with others., • Work in our FAA repair station What You Bring: • Soldering, • Experience in a similar role, • Experience with IPC-610 and IPC J-STD-001F, certification is an asset, • High school diploma or equivalent, • Must be a US Citizen In accordance with 49 CFR Part 40, this role may perform safety sensitive duties and is subject to drug and alcohol testing in accordance with the regulation. Types of tests include pre-employment, random, post-accident, reasonable suspicion and return to duty and follow up testing. Who We Are: Our Values Environmental, Social and Governance The Curtiss-Wright Defense Solutions facility in Santa Clarita, California is the center of excellence for hardware level system integration and advanced package design. Integrated Systems in Santa Clarita prides itself on experience, expertise, and low risk solutions. Our primary focus is understanding the technical challenges our customers face and creating partnerships in order to provide a high TRL solution. For more information visit: Santa Clarita, California | Curtiss-Wright Defense Solutions (curtisswrightds.com) No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Senior Electronics Quality Specialist As our Senior Electronics Quality Specialist, under limited supervision, you will be responsible for receiving, in-process and final inspections of system components comprised of printed circuit boards (PCB's) electrical cables, wiring, assemblies and system installations in accordance with engineering and customer requirements using schematics and parts lists, inspection plans and associated drawings. You will Independently perform quality verifications and document results in a clear, precise manner Location: Santa Clarita, CA - Onsite We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture Salary Range: $25.38 - $33.85 per hour Please note that the salary range information provided is a general guideline only, reflecting a position based in California. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. Your Challenge: Quality Control & Inspection • Interprets purchase orders, work instructions, engineering drawings, specifications, and standards to ensure accurate inspection, • Performs inspections of materials, components, and finished products using standard measuring equipment at various stages of the production process, • Provide detailed in-process inspections on components, using detailed drawings, CAD models, and established processes to verify conformance to design requirements., • Routinely observe technical operations and offer guidance and/or serve as an additional technical resource, • Uses calibrated measuring equipment (e.g., micrometers, microscopes, calipers, height gauges) to verify part conformity to specifications, • Created and reviews First Article Inspection Reports (FAIR) IAW AS9102, • Identify, document, and resolve production and test anomalies in accordance with specifications, procedures and drive corrective action as required, • Complete inspection reports and MES/SAP transactions, • Ensure inspection devices are properly calibrated and maintained, • Validate compliance to inspection protocols and quality procedures, • Provides 2nd shift quality turnover status reports Nonconformance & Corrective Action Management • Generate Non-Conformance reports in SAP for discrepancies found during operations with accurate defect descriptions, • Work with, Engineers, and other personnel to assist in CAPA/RCCA to increase product improvement and lower QMS defects, • Support 2nd shift team members drive customer satisfaction through ensuring the consistent and repeatable on-time delivery of conforming finished goods per customer requirements, • Communicate and help resolve non-conforming quality related issues to the 2nd shift team, • Process non-conforming products and assist engineering in root cause analysis and corrective action What you Bring: • High School Diploma or equivalent and a minimum of 5 years of prior relevant experience within Aerospace and Defense, • Experience performing visual inspection on different commodities including CCA's, PCB's, machined parts, Cables/Harnesses, electronic assemblies and component parts., • Experience with electronic assemblies and interconnect systems, • Experience reading and interpreting engineering design drawings, • Experience performing detailed dimensional inspections using precision measuring tools, • Experience in using calibrated precision measurement tools, • Experience in working in an AS9100 quality system, • Experience in inspecting crimping, solder, conformal coating, staking and surface mount components Preferred: Current or Recent certifications or the ability to complete the following certifications • IPC-A-610H, • J-STD-001, • IPC-WHMA-A 620D, • IPC-A-600K, • AS9102 training/certification, • ESD Training and awareness, • Experience with and understanding of AS9100/ISO9001 QMS requirements, • Proficient in SAP 4 Hana or ECC, and Microsoft products., • Able to lift 30 lbs, • Technical experience/education is desired In accordance with 49 CFR Part 40, this role may perform safety sensitive duties and is subject to drug and alcohol testing in accordance with the regulation. Types of tests include pre-employment, random, post-accident, reasonable suspicion and return to duty and follow up testing. Who We Are: Our Values Environmental, Social and Governance The Curtiss-Wright Defense Solutions facility in Santa Clarita, California is the center of excellence for hardware level system integration and advanced package design. Integrated Systems in Santa Clarita prides itself on experience, expertise, and low risk solutions. Our primary focus is understanding the technical challenges our customers face and creating partnerships in order to provide a high TRL solution. For more information visit: Santa Clarita, California | Curtiss-Wright Defense Solutions (curtisswrightds.com) #LI-YH1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Chief Systems Engineer - Defense - Onsite Position We are growing and looking for a Chief Engineer to join our team in Santa Clarita, CA. As our Chief Engineer you will be an industry-recognized expert in an engineering discipline or specialty area. You will have created or significantly changed technology over at least a decade of time and continue to lead the business' technical growth. Location: Santa Clarita, CA- Onsite - Relocation assistance may be provided for select candidates We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture Salary Range: $ 173,200.00 - $ 250,000.00 USD annual per year plus bonus's Please note that the salary range information provided is a general guideline only, reflecting a position based in California. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. Your Challenge: • Leading large technical teams to meet complex customer requirements, • Representing the company as the technical expert to customers, suppliers, and CW management, • Synthesizing requirements into the lowest risk solution available, • Producing technical documentation to adequately describe CW's solution to both the customer and the engineering team, • Providing technical guidance to cross functional teams, • Reporting technical status and way forward to varied audiences, • Recommending training to enhance team development, • Evaluating technical performance and potential to individual performers and job applicants; assuming technical responsibility for the performance of the teams in his/her charge What You Bring: • 20-25 years of experience at US DoD Primes or at a company that directly supports them., • Knowledge of system hardware/software development, integration and test for deployed military vehicle applications, • Exceptional problem solving skills, • Expert knowledge of the systems engineering tools DOORS and Cameo, • Working knowledge of engineering development tools like Clearquest, JIRA, and Rational Development Tools, • Ability to operate and debug Linux and VxWorks based computing systems, • Solid understanding of SOSA and VPX system design standards, • Solid understanding of serial communication protocols such as MIL-STD-1553, RS422, RS485, RS232, 10G and 100G Gigabit Ethernet, PCIe, USB, • Solid understanding of the latest processing and graphics solutions, • Excellent troubleshooting skills of rugged computing systems, • Ability to lead in a team environment, • Ability to drive clarity to ambiguous requests or requirements, • Ability to work well in a fast-paced professional office environment, • Experience conducting System Safety Assessment, Functional Hazard assessment and Failure Mode Effects Analysis is a plus, • Previous experience in RTCA/DO-254/DO-178 processes and FAA Certification is a plus, • Experience with Microsoft Office including Word Excel, PowerPoint and Project, • BS Computer Science, BS Software Engineering, BS Electrical Engineering preferred Who We Are: Our Values Environmental, Social and Governance The Curtiss-Wright Defense Solutions facility in Santa Clarita, California is the center of excellence for hardware level system integration and advanced package design. Integrated Systems in Santa Clarita prides itself on experience, expertise, and low risk solutions. Our primary focus is understanding the technical challenges our customers face and creating partnerships in order to provide a high TRL solution. For more information visit: Santa Clarita, California | Curtiss-Wright Defense Solutions (curtisswrightds.com) #LI-YH1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Electronics Quality Specialist - 2nd Shift 2:00 p.m. to 10:30 p.m. We have a rewarding opportunity to for a 2nd Shift Electronics Quality Specialist to join our quality team. As our 2nd shift Electronics Quality Technician, under limited supervision, you will be responsible for receiving, in-process and final inspections of system components comprised of printed circuit boards (PCB's) electrical cables, wiring, assemblies and system installations in accordance with engineering and customer requirements using schematics and parts lists, inspection plans and associated drawings. You will Independently perform quality verifications and document results in a clear, precise manner Location: Santa Clarita, CA-Onsite We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture Salary Range: $25.38 - $33.85 per hour plus shift premium Please note that the salary range information provided is a general guideline only, reflecting a position based in California. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. Your Challenge: Quality Control & Inspection • Interprets purchase orders, work instructions, engineering drawings, specifications, and standards to ensure accurate inspection, • Performs inspections of materials, components, and finished products using standard measuring equipment at various stages of the production process, • Provide detailed in-process inspections on components, using detailed drawings, CAD models, and established processes to verify conformance to design requirements., • Routinely observe technical operations and offer guidance and/or serve as an additional technical resource, • Uses calibrated measuring equipment (e.g., micrometers, microscopes, calipers, height gauges) to verify part conformity to specifications, • Created and reviews First Article Inspection Reports (FAIR) IAW AS9102, • Identify, document, and resolve production and test anomalies in accordance with specifications, procedures and drive corrective action as required, • Complete inspection reports and MES/SAP transactions, • Ensure inspection devices are properly calibrated and maintained, • Validate compliance to inspection protocols and quality procedures, • Provides 2nd shift quality turnover status reports Nonconformance & Corrective Action Management • Generate Non-Conformance reports in SAP for discrepancies found during operations with accurate defect descriptions, • Work with, Engineers, and other personnel to assist in CAPA/RCCA to increase product improvement and lower QMS defects, • Support 2nd shift team members drive customer satisfaction through ensuring the consistent and repeatable on-time delivery of conforming finished goods per customer requirements, • Communicate and help resolve non-conforming quality related issues to the 2nd shift team, • Process non-conforming products and assist engineering in root cause analysis and corrective action What you Bring: • High School Diploma or equivalent and a minimum of 5 years of prior relevant experience within Aerospace and Defense, • Experience performing visual inspection on different commodities including CCA's, PCB's, machined parts, Cables/Harnesses, electronic assemblies and component parts., • Experience with electronic assemblies and interconnect systems, • Experience reading and interpreting engineering design drawings, • Experience performing detailed dimensional inspections using precision measuring tools, • Experience in using calibrated precision measurement tools, • Experience in working in an AS9100 quality system, • Experience in inspecting crimping, solder, conformal coating, staking and surface mount components Preferred: Current or Recent certifications or the ability to complete the following certifications • IPC-A-610H, • J-STD-001, • IPC-WHMA-A 620D, • IPC-A-600K, • AS9102 training/certification, • ESD Training and awareness, • Experience with and understanding of AS9100/ISO9001 QMS requirements, • Proficient in SAP 4 Hana or ECC, and Microsoft products., • Able to lift 30 lbs, • Technical experience/education is desired In accordance with 49 CFR Part 40, this role may perform safety sensitive duties and is subject to drug and alcohol testing in accordance with the regulation. Types of tests include pre-employment, random, post-accident, reasonable suspicion and return to duty and follow up testing. Who We Are: Our Values Environmental, Social and Governance The Curtiss-Wright Defense Solutions facility in Santa Clarita, California is the center of excellence for hardware level system integration and advanced package design. Integrated Systems in Santa Clarita prides itself on experience, expertise, and low risk solutions. Our primary focus is understanding the technical challenges our customers face and creating partnerships in order to provide a high TRL solution. For more information visit: Santa Clarita, California | Curtiss-Wright Defense Solutions (curtisswrightds.com) #LI-YH1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Join a top ENR-ranked builder as a Commercial Construction Estimator—high-profile projects, competitive pay, and a chance to shape skylines nationwide! This Jobot Job is hosted by: Sam Stimac Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume. Salary: $120,000 - $140,000 per year A bit about us: We are a nationally recognized leader in the commercial construction industry, ranked among the top ENR general contractors. Known for delivering high-quality, innovative projects across a wide range of sectors—including office, retail, education, healthcare, and more—we have built our reputation on excellence, safety, and client satisfaction. Our team is dedicated to creating exceptional spaces while maintaining the highest standards of craftsmanship and collaboration. Why join us? Competitive salary and benefits package (health, retirement, PTO). • Opportunities for professional growth and advancement. • Collaborative, team-oriented work environment. • The chance to work on high-profile, innovative projects with a top-tier general contractor. Commitment to safety, sustainability, and excellence in every project. Job Details We are seeking a Commercial Construction Estimator to join our growing team. In this role, you will be responsible for developing accurate and competitive cost estimates for commercial construction projects. You’ll collaborate closely with project managers, architects, and subcontractors, playing a key role in securing and delivering successful, high-profile projects nationwide. Key Responsibilities • Prepare accurate and detailed estimates for commercial construction projects, including office buildings, retail spaces, and other large-scale facilities. • Review construction drawings, specifications, and documents to calculate project costs. • Collaborate with architects, engineers, project managers, and subcontractors to gather critical estimating data. • Build and maintain relationships with subcontractors, vendors, and suppliers to secure competitive pricing. • Evaluate bids to ensure alignment with project requirements and cost efficiency. • Identify cost-saving opportunities while maintaining quality and safety standards. • Support project teams in managing budgets, schedules, and change orders. • Assist in preparing proposals, bid packages, and client presentations. • Mentor junior estimators as needed. Qualifications • Bachelor’s degree in Construction Management, Civil Engineering, or a related field (preferred). • 5+ years of commercial construction estimating experience, ideally with an ENR-ranked general contractor. • Strong knowledge of construction processes, materials, and methods. • Proficiency in Procore, Bluebeam, Microsoft Excel, and estimating software. • Excellent analytical skills and attention to detail. • Strong communication and negotiation skills. • Ability to manage multiple projects and meet deadlines in a fast-paced environment. • Knowledge of OSHA safety regulations and cost control practices. LEED accreditation or other relevant certifications a plus. Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Temp to HIre or Contract (this is for you). This Jobot Consulting Job is hosted by: Dexter Dionio Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume. Salary: $23 - $27 per hour A bit about us: This is an excellent opportunity for a Medical Assistant looking to apply their skills in an unconventional setting. The successful candidate will be responsible for providing both clinical and administrative support to ensure efficient operation of the office. Experienced Medical Assistant and New Grads are welcome to join! Why join us? Benefits include: Medical, Dental, and Vision benefits. Short and Long Term Disability. Retirement Savings Plan-employer matching and 100% vesting upon enrollment. Paid Vacation and Sick time. Life Insurance and AD&D. Credit Union membership. 9 1/2 paid Holidays. Direct Deposit. Job Details Schedule: Full-time, M-F, no weekends Hours: 8a-5pm, Day shifts Position: Temp-to-hire, Paid weekly + benefits Contract duration: 6-months Must Have: Must pass background check Must have MA school certificate As a Medical Assistant, your key responsibilities will include: 1. Providing clinical assistance by performing routine tasks such as taking vitals, preparing patients for examinations, administering medication under the direction of a physician, and maintaining patient records. 2. Assisting in the management of patient care, including scheduling appointments, answering patient inquiries, and coordinating patient referrals. 3. Supporting the finance team by maintaining and updating financial records, processing invoices, and assisting with budget preparation. 4. Collaborating with the finance team to understand healthcare costs and contribute to financial planning and cost management. 5. Ensuring compliance with healthcare regulations and maintaining up-to-date knowledge on best practices in both the healthcare and finance industries. 6. Assisting in the preparation of reports and presentations for management, including financial reports and health outcomes data. Qualifications To be considered for this exciting opportunity, you must have: 1. A certification as a Medical Assistant from an accredited institution. 2. Excellent organizational skills and attention to detail. 3. Strong communication skills, both written and verbal, with the ability to effectively communicate with patients, healthcare professionals, and finance team members. 4. A proactive approach, with the ability to work independently and as part of a team. Ready for the next steps? Apply now by clicking the "Easy Apply" button. Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

EHS Manager — Chemical Manufacturing | Santa Clarita, CA | Up to $95K + High-Visibility Safety Leadership This Jobot Job is hosted by: Augie Ullmann Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume. Salary: $85,000 - $95,000 per year A bit about us: We operate in a highly regulated chemical-manufacturing environment where safety is central to everything we do, and we're looking for a visible, hands-on leader to help protect our people, our customers, and the environment. Why join us? Competitive Compensation: Up to $85,000 base salary (DOE) + Bonuses 401(k) with Generous Match [confirm match] Comprehensive Benefits: Medical, Dental, Vision, Life Insurance Generous PTO & Paid Holidays High-Visibility, High-Impact Role: own EHS policy and lead regulatory compliance across the organization in partnership with plant site leadership On-site role (field inspections required; not hybrid) Job Details Key Responsibilities and Duties Serve as the company's EHS policy leader, partnering with the Plant Site Leader to ensure consistent application of EHS policy and principles Inspect facilities to identify safety, health, and environmental risks; develop and run a schedule of routine inspections Manage compliance with all regulatory agency requirements and participate in regulatory site audits Develop, implement, and monitor health and safety procedures company-wide Prepare, schedule, and deliver training on emergency procedures, workplace safety, and related topics; maintain training files Track safety KPIs (injury, training) using appropriate software tools Draft inspection reports documenting findings Maintain SDS accessibility and records of hazardous-waste/pollutant exposure as required Manage workers' compensation claims through depositions, claim reviews, attorney meetings, and adjuster requests Implement controls and processes to mitigate material environmental risks Qualifications Needed Bachelor's degree in environmental engineering, safety management, or similar (preferred, not required) OSHA or similar EHS certification Minimum 7 years' experience as an EHS coordinator or manager Strong background in chemical-manufacturing EHS and material environmental-risk mitigation Detailed knowledge of OSHA, EPA, and ANSI regulations Ability to read and interpret safety data sheets (SDS) Proficiency in MS Word, Excel, and PowerPoint Strong leadership and training abilities; excellent written/verbal communication; strong attention to detail Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Highly Reputable CPA firm in North LA urgently seeks a Tax Senior or Tax Manager! This Jobot Job is hosted by: Ron Calhoun Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume. Salary: $100,000 - $150,000 per year A bit about us: Northern CA CPA Firm. We Specialize in providing business and tax consulting that keeps businesses growing and minimizes individual tax liabilities. Depend on us for accurate accounting, business and tax planning services, with a problem solving approach that saves you money and maximizes profit potential. Why join us? Competitive base salary and overall compensation package Full benefits: Medical, Dental, Vision Generous PTO, vacation, sick, and holidays Life Insurance coverage 401 (K) with generous company match Job Details Tax Manager - CPA Required Tax Senior - CPA Preferred Prepare complex tax returns and perform tax research Respond to tax notices from taxing authorities Review tax information supplied by the client and will meet with and/or contact client regarding general or complex tax questions Recognize, anticipate, and resolve tax issues and make recommendations Adapt to the company's practices, policies, and culture What You Need: 3-5 years of prior experience CPA certified or CPA candidacy preferred Strong organization, problem-solving and analytical skills Diligent work ethic and dedicated to providing superior client service Excellent communication skills – oral, written, and interpersonal with the ability to convey information in a clear and concise manner to upper level team members and clients Strong client engagement skills Must be proficient in corporate, partnership, and individual tax planning and compliance Why join us? Rapidly growing, fun and exciting Tax Firm Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

100% REMOTE Contract to Hire Entry Level Attorney / Associate Attorney Needed for Growing Firm! This Jobot Consulting Job is hosted by: Reed Kellick Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume. Salary: $40 - $45 per hour A bit about us: We are a growing labor & employment law firm that is on the lookout for a fully remote contract-to-hire Entry-Level Attorney / First-Year Associate who is based in and licensed in California! Why join us? As a First Year Associate / First Year Attorney in our company, we are able to offer: An hourly rate between $40-45/hr! Medical, dental and vision coverage! 401k! Work from home / work remotely 100%! Conversion to a perm/direct hire role after 3 months! Job Details As an First-Year Attorney / Junior Associate on our team, we are looking for: CA Bar license CA residence Willingness to work on a contract for 3 months before conversion to a perm, direct hire role JD from an accredited law school Interest in employment law and/or workers' compensation Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionDescription Company Profile: At CAVA, we make it deliciously simple to eat well and feel good every day. We are guided by a Mediterranean heritage that’s been perfecting how to eat and live for four thousand years. We prioritize authenticity, curiosity and the pursuit of excellence in everything we do. We are working towards something big, together. We foster a culture built on five core values: • Generosity First, Always: We lead with kindness. Our best work happens when we act in service of others., • Constant Curiosity: We are eager to learn, grow, and explore beyond the obvious., • Act with Agility: We welcome change; it’s the only constant. We embrace, adjust, adapt., • Passion for Positivity: We greet each day with warmth and possibility., • Collective Ambition: We have high aspirations that are achieved when we work together with a shared purpose. Assistant General Manager: In the role of Assistant General Manager (“AGM”), you will be responsible for bringing our mission, values, and competencies to life for our guests and Team Members in our restaurants. You will partner with the General Manager and Area Leader in the establishment of store action plans, financial metric results, and the development of hourly Team Members in the restaurant. You will be responsible for supporting the General Manager in the overall restaurant operations at an exceptional level including but not limited to schedules, forecasting, labor management and inventory. As an AGM, you will be expected to learn and master competency-based leadership and operational skills. What You’ll Do: • Assist the General Manager in managing daily restaurant operations, including opening and closing procedures., • Ensure adherence to CAVA’s standards for food quality, service, and cleanliness., • Oversee inventory management, supply ordering, and cost control to maintain profitability., • Supervise and support Team Members with training, coaching, and performance feedback., • Support the General Manager with scheduling and staffing., • Assist with addressing Team Member issues and conflicts to maintain a positive work environment., • Enhance the guest experience by upholding high service standards and promptly addressing customer concerns., • Implement strategies to help with boosting customer satisfaction and loyalty., • Lead by example in customer service and encourage the team to follow suit., • Support with managing financial aspects including tracking sales, cash handling, and adhering to budget guidelines., • Assist with preparing financial reports, analyze performance metrics, and identify areas for improvement., • Assist with ensuring accurate financial record-keeping and compliance with cash handling procedures., • Assist with overseeing food safety practices and ensure team training on proper procedures., • Assist with administrative tasks such as inventory management and maintaining operational records., • Support the General Manager in report preparation and action plan implementation., • Participate in special projects and initiatives to drive restaurant success and support the General Manager as needed., • Assist with any additional duties as assigned by the General Manager or higher management. The Qualifications: • 1- 2 years of experience in a supervisory or management role within the restaurant or hospitality industry., • Strong leadership and team management skills., • Excellent communication and interpersonal abilities., • Proven track record of delivering exceptional customer service., • Adapt to changing circumstances and develop solutions to enhance restaurant performance., • Ability to manage financial aspects, including budgeting and cost control., • Knowledge of legal, health, safety, and sanitation regulations., • Ability to adapt to a fast-paced environment and solve problems effectively., • Willing to work flexibly (including at night and on weekends) and to travel as needed, • Consistently exhibits a generous and friendly demeanor when engaging with guests., • Completes tasks and projects within established timelines., • Promotes and upholds a culture of inclusivity and respect within the team., • Actively seeks and incorporates feedback from team members to improve performance and operations., • Applies effective decision-making skills to guide the team towards achieving success., • Remains open to and actively explores new ideas to drive business success., • Demonstrates emotional stability and resilience in high-stress situations. Physical Requirements: • The ability to regularly work overtime, • Must be able to bend and reach overhead often, • Must possess dexterity to handle tongs, pots/pans, and other equipment, • Must be comfortable working in temperatures ranging from hot to cold, • Must be comfortable working near open flames, • May be required to work in tight spaces, • Must maintain near constant communication with multiple people, • Close vision, distance vision, and peripheral vision are required, • Must be able to sit, squat and kneel occasionally, • Must be able to work in a constant state of alertness and safe manner, • May be required to occasionally work in outdoor weather conditions, • May stand for long periods of time and lift up to 50 pounds What We Offer:, • We’ve got you covered. Here are just some of the benefits available to CAVA team members:, • Early Wage Access*, • Health, Dental, Vision, Telemedicine, Pet Insurance plus more!*, • 401k enrollment with CAVA contribution*, • Paid sick leave, parental leave, and community service leave*, • FREE CAVA Meal for every shift worked, • The opportunity to be on the ground floor of a rapidly growing brand, • Competitive pay, $28 per hour (projected annually as $72,800 based on a 50-hour work week) *indicates eligible qualifying positions This job description is not intended to be a comprehensive list of all the duties and responsibilities of the position, and such duties and responsibilities may change without notice. As an equal opportunity employer, CAVA considers applicants for all positions without regard to race, color, sex, religion, national origin, disability, age, marital status, sexual orientation, familial status, genetic information or any other characteristic or protected classes as defined by federal, state, or local law. CAVA – joining “a culture, not a concept” We run background checks on all new hires in this position.

Job Description Headquartered in Dublin, Ohio (USA) with Engineering Centers in Pune, India and Yokohama, Japan, Goken is a global Engineering Services and Product Development company founded in 2004. We partner with OEMs and suppliers across the mobility space, as well as clients in non-mobility industries, to deliver innovative solutions and accelerate product development. At Goken, we embrace our motto of "Time to Innovate" by pushing boundaries, cultivating entrepreneurial thinking, and empowering individuals who thrive on tackling challenges, embrace fresh ideas, and are driven to create solutions that shape the future. This mindset fuels our mission and empowers our teams to solve complex problems, deliver measurable value, and move our clients and industries forward. Our Vision is to empower associates to drive innovation and lead meaningful change wherever it's needed, ensuring we stay ahead of the challenges and opportunities of tomorrow. Our Mission is to build trust that fosters greatness in our people, excellence in our clients, and positive impact in the communities we serve. Goken offers a competitive compensation structure and benefits that support professional growth and personal well-being. We also foster a culture built on high performance, collaboration, continuous improvement, and ongoing professional development. Summary: This role will support a largescale Automotive OEM's racing/performance division with Chassis engineering design and development activities focusing on Suspension, Brakes and Exhaust systems. Responsibilities: • Lead and support the engineering activities for large scale product development programs by investigating feasibility, performing design using 3-D modeling software, conduct layout review and 2D drawing creation., • Analyze and resolve complex problems independently or with minimal guidance., • Create part specification requirements and BOM., • Negotiate with surrounding component business units and suppliers., • Perform cost analysis, strength calculations and material selection., • Act as a liaison between Goken global teams and point of contacts at assigned Client to identify project requirements, understand technical specifications and meet client expectations., • Monitor and track the progress of projects and handle any issues that arise. Report and escalate to management as needed., • Use best practices and knowledge of internal or external business issues to improve product and/or processes., • Search new ways to increase overall efficiency, utilize up-to-date technology, and reduce design and parts costs, • Travel to client sites required. Qualifications: • Minimum Bachelor's degree in Engineering and 5+ years of Automotive industry experience with Design and Development of Chassis commodities such as Brake, suspension and exhaust systems., • Education with the following specialties preferred: Mechanical, Mechanical Technology, Aerospace, Automotive, Manufacturing., • 5+ years of Experience using 3-D modeling software CATIA V6/3D Experience (CATIA V5 experience will be considered) including Kinematics., • Experience with performing detailed tolerance stack-ups, bolt torque calculations, basic linear-static FEA., • Strong understanding of DFM (Design for Manufacturing) and DFA (Design for Assembly) required., • Strong written and verbal communication skills., • Proficiency in MS office. The pay range for this role is an estimate based on a wide range of compensation factors, inclusive of base pay only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. California Pay Range$53—$60 USD Goken is committed to fostering a respectful, inclusive, and engaging workplace across all global locations. We value diversity and provide equal opportunities for career growth and professional development, regardless of race, color, religion, national origin, sex, age, disability, veteran status, genetic information, sexual orientation, gender identity, marital status, or any other characteristic protected by law.

Job Description JOB SUMMARY The Regional Sales Manager (Commercial/Industrial Channel) develops and implements sales plans, promotional campaigns, distribution channel strategy, etc., in assigned region to achieve sales growth goals. Works directly with end users and distributors while managing and motivating independent sales agents. Provides input and identifies new projects and product development opportunities. This position is ideally based in the Greater Philadelphia, PA area. We will also consider remote candidates located in the following Northeast region states: Pennsylvania | Maryland | Delaware | New Jersey | New York | Ohio | West Virginia | Connecticut | Rhode Island | Vermont | Massachusetts | New Hampshire | Maine KEY RESPONSIBILITIES • Sells into assigned region to meet and exceed sales plan and growth expectations, • Maintains relationships/channels from concept to implementation and product delivery, • Develops and implements sales and marketing programs within region to drive revenue growth, • Establishes and develops relationships with target end user account lists within the assigned market, • Maintains regular direct communication with all commercial distributors (national and regional) within the region via location visits, joint end user sales calls, disseminating company announcements, product updates, etc., • Establishes account objectives and follows through until completion, • Defends against competitive initiatives, • Provides competitive intelligence about product, pricing, marketing activities, etc., • Drives product launches and education through the distribution and end user channel, • Maintains an up-to-date accounting of sales activities and objectives via Sales Force, • Is an expert in PPE, specifically hand protection, • Manage independent sales agents by participating in joint end user and distribution calls, providing training and feedback, monitoring sales metrics including call reports and revenue results, and holding monthly reviews MINIMUM QUALIFICATIONS EDUCATION Bachelor’s Degree or equivalent professional experience required EXPERIENCE • 5 years of experience in product sales and brand sales required PREFERRED SKILLS • Working knowledge of sales techniques including merchandising, product trials, inventory management, and promotions, • Excellent knowledge of company products, the dynamics of the assigned market segment, pricing strategies, customer databases and company sales strategies and approaches, • Excellent verbal, written and follow-up skills, • Proficient in spreadsheet, word-processing, and presentation software, • Able to complete assignments within time frame specified by management, • Able to interact effectively and cooperatively with employees, customers and co-workers, • Able to operate in a fast-paced organization and handle multiple projects simultaneously SUPERVISORY RESPONSIBILITIES No Supervisory Responsibilities PHYSICAL DEMANDS While performing the duties of this job, the employee regularly uses verbal and written communication skills and must be able to hear and speak clearly. The role requires prolonged periods of sitting at a desk and working on a computer, as well as frequent use of hands to grasp, handle, and manipulate objects. This position may also require periods of standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing, as necessary to perform job duties. The employee must be able to occasionally lift, carry, and move items weighing up to 15 pounds. Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. TRAVEL Consistent OVERALL WORK ENVIRONMENT The office is clean, orderly, properly lit and ventilated. Noise levels are considered low to moderate. Field conditions vary. This position is primarily office-based. May be required for trade shows, customer visits, field sales support, and manufacturing site visits. Occasional exposure to industrial or manufacturing environments when visiting facilities or conducting product field testing. ADDITIONAL INFROMATION The Salary Range for this position at Mechanix Wear, LLC is $115,000 - $135,000k Annual (USD). Starting pay for the successful applicant depends on a variety of job-related factors, including but not limited to market demands, experience, training, skills, and education. The benefits available for this position include medical, dental, vision, 401(k) plan, life insurance coverage, wellness benefits, education reimbursement program, and Vacation time. Mechanix Wear is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact the Mechanix Wear Human Resources department. Mechanix Wear will consider employment-qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring.

Job Description Job Title: Customer Care Advocate – Reimbursement Specialist Job Description The Customer Care Advocate – Reimbursement Specialist supports patients as they navigate complex insurance authorization processes for innovative medical technologies. This role combines prior authorization expertise, denial management, and consultative sales to drive successful patient outcomes through insurance approvals, appeals, or alternative funding solutions. You will manage complex reimbursement cases in a high-touch, collaborative environment and help influence patient decisions when insurance coverage is limited or denied. Responsibilities • Guide patients through complex insurance authorization and reimbursement processes for medical technologies., • Manage prior authorization requests, including gathering and reviewing medical documentation and submitting complete, accurate cases to payers., • Handle insurance denials and appeals by reviewing payer decisions, identifying issues, and preparing effective appeal submissions., • Perform full payer determination to identify coverage options, alternative funding sources, or other reimbursement pathways., • Review medical records and documentation to ensure accuracy, completeness, and appropriate coding for claims and appeals., • Collaborate closely with internal teams, including inside sales, VA support, and field teams, to resolve complex reimbursement cases and support patient access to care., • Provide high-touch customer care and technical support to patients, healthcare providers, and other stakeholders, maintaining a professional and empathetic approach., • Use consultative sales skills to influence patient decisions when coverage is limited or denied, presenting alternative options and funding solutions., • Utilize CRM systems, call center software, and Microsoft 365 tools to manage accounts, track cases, and document all interactions and outcomes., • Follow up persistently and professionally with payers, providers, and patients to ensure timely resolution of cases and appeals., • Maintain a strong focus on client satisfaction by delivering accurate information, timely updates, and consistent communication., • Contribute to process improvements by sharing feedback, embracing new procedures, and adapting to changes in workflows and payer requirements., • Meet performance and commission-based sales targets related to approvals, reimbursement outcomes, and patient conversions., • Ensure compliance with company policies, internal controls, and applicable regulations in all reimbursement and patient support activities., • Participate in and complete all required training to stay current on insurance processes, coding practices, and product-specific reimbursement guidelines. Essential Skills • Demonstrated experience with insurance denials and appeals, including preparing and submitting appeal documentation., • Proficiency in prior authorization processes and medical insurance claims handling., • Ability to review and interpret medical documentation and medical records for reimbursement purposes., • Coding fluency and familiarity with medical coding practices, including ICD-10, to support accurate claim and appeal submissions., • Strong customer service skills, with the ability to provide high-touch support in a patient-focused environment., • Experience in denial management and full payer determination to identify coverage and funding options., • Proficiency with Microsoft Excel and Microsoft 365 for tracking cases, analyzing data, and reporting., • Comfort using CRM systems and call center software to manage accounts and document interactions., • Effective persuasion and negotiation skills to overturn payer denials and secure approvals., • Professional persistence in following up on complex cases and driving them to resolution., • Ability to multitask, manage priorities, and maintain accuracy in a dynamic, fast-paced, collaborative environment., • Commitment to high levels of client satisfaction and adherence to company policies and internal controls., • Minimum 2 years’ experience in medical authorization involving medical record review., • Bachelor’s degree preferred or equivalent relevant experience., • Ability to thrive in a commission-based role and work toward defined performance and sales objectives. Additional Skills & Qualifications • Proficiency in medical terminology and ICD-10 coding to support accurate claims and appeals., • Experience in pharmaceutical, biotech, or medical device industries, providing context for product-specific reimbursement challenges., • Medical coding certification preferred but not required., • Hands-on experience with CRM systems, call center software, and Microsoft 365 for efficient communication and case management., • Demonstrated success in achieving sales objectives in a commission-based environment., • Dynamic, results-oriented mindset with the ability to adapt to process improvements and changing workflows., • Strong communication skills, both written and verbal, with the ability to explain complex insurance and reimbursement concepts clearly., • Willingness to complete all required training and maintain up-to-date knowledge of insurance processes, payer requirements, and internal procedures., • Ability to collaborate effectively within an interactive team and contribute to a supportive, results-oriented culture. Work Environment This role operates in an office-based setting in Valencia, CA, with standard Monday through Friday hours from 8:00 a.m. to 5:00 p.m. Fully Onsite Job Type & Location This is a Contract to Hire position based out of Valencia, CA. Pay and Benefits The pay range for this position is $27.50 - $27.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Valencia,CA. Application Deadline This position is anticipated to close on Jun 30, 2026. About Aston Carter Aston Carter provides world-class corporate talent solutions to thousands of clients across the globe. Specialized in accounting, finance, human resources, talent acquisition, procurement, supply chain and select administrative professions, we extend the capabilities of industry-leading companies. We draw on our deep recruiting expertise and expansive network to meet the evolving needs of our clients and talent community with agility and excellence. With offices across the U.S., Canada, Asia Pacific and Europe, Aston Carter serves many of the Fortune 500. We are proud to be a ClearlyRated Best of Staffing® Platinum Award winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email astoncarteraccommodation@astoncarter.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description JOB SUMMARY The Regional Sales Manager (RSM) will be responsible for overseeing and driving sales within the Western 1/3 of the US. The primary goal will be to achieve sales targets, expand market presence, and foster strong customer relationships. The RSM will lead a team of external sales representatives, providing guidance, training, and support to ensure their success. The RSM will provide input in presentations, planogram creation, and cross-merchandising opportunities. Nurturing and developing relationships with sales representatives, along with traveling to meetings and trade shows, is an essential part of this role. This position is ideally based in the Western Region of the US. KEY RESPONSIBILITIES Customer Relationship Management: • Build and maintain strong relationships with key customers and stakeholders., • Generates and develops new business to meet specified production goals., • Maintains and nurtures existing customer relationships., • Responds to all inquiries and requests in a timely and professional manner., • Understands and communicates information regarding company products, services, and policies and procedures to new and existing clients. Sales Strategy Development: • Create and implement strategies to achieve regional sales targets., • Possess and maintains thorough knowledge of industry product information., • Continually gathers information on local competition and prevalent industry and business climate within the region; communicates information to management and others as needed., • Ensures that all required customer paperwork is complete, accurate, and submitted on time., • Provides timely and accurate reports as required., • Attends and participates in business/trade events that impact business unit., • Attends and participates in team strategic sales meetings Sales Forecasting: • Prepare accurate sales forecasts and reports., • Prepares and presents sales proposals., • Plans and manages sales territory., • Track and analyze sales performance metrics to ensure goals are met., • Communicates changes in business and provides forecasts. Team Leadership: • Supports and supervises the efforts of the Independent Sales Representatives within the specified region., • Train and manage a team of sales representatives. Collaboration: • Work closely with other departments, such as marketing, sourcing, shipping, and product development, to align strategies. Problem-Solving: Address and resolve any issues or challenges that arise with sales representatives or customers. Market Analysis: • Conduct market research to identify new opportunities and trends. Budget Management: • Provide input and manage the regional sales budget. Compliance: • Ensure all sales activities comply with company and customer policies. MINIMUM QUALIFICATIONS EDUCATION Bachelor’s degree in business, marketing, or another quantitative field is required or equivalent combination of education and experience. EXPERIENCE • 4+ years of experience in the following areas, • B2B sales or as a retail buyer with a strong track record of meeting or exceeding targets., • Selling or buying consumer products., • Knowledge of cross-merchandising and effective planogram placement, • Selling soft goods that require planogram creation., • Working in hardware and/or farm retail channels., • Managing external sales representatives. PREFERRED SKILLS • Self-starter and proactive., • Commitment to excellence and high standards., • Excellent written and verbal communication skills., • Good judgement with the ability to make timely and sound decisions, • Creative, flexible, and innovative team player., • Demonstrated ability to make successful presentations to individuals and/or groups at all levels of an organization, • Strong organizational skills; able to manage priorities and workflow., • Ability to work independently and as a member of various teams and committees., • Ability to calculate figures and amounts such as discounts, interest, commissions, and percentages., • Excellent problem resolution and consultative sales skills., • Proven ability to handle multiple projects and meet deadlines, • Strong interpersonal skills., • Ability to prepare reports and business correspondence., • Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm., • Proficiency in Microsoft Office products, Word, PowerPoint, and Excel. TRAVEL Consistent ADDITIONAL INFROMATION The Salary Range for this position at Mechanix Wear, LLC is $115,000 - $135,000k Annual (USD). Starting pay for the successful applicant depends on a variety of job-related factors, including but not limited to market demands, experience, training, skills, and education. The benefits available for this position include medical, dental, vision, 401(k) plan, life insurance coverage, wellness benefits, education reimbursement program, and Vacation time. Mechanix Wear is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact the Mechanix Wear Human Resources department. Mechanix Wear will consider employment-qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring.

Job DescriptionDescription: Why You’ll Love this Registered Nurse (RN) Job! Leave behind the hospital hustle and discover a more fulfilling path as a Registered Nurse (RN) at Hydration Room. This is your opportunity to maintain a healthy work-life balance while continuing to make a real difference with the skills you’ve worked hard to earn! In this Registered Nurse (RN) role, you’ll administer IV and injection therapies, provide patient education, and support overall wellness through guidance on nutrition, exercise, and preventive health measures. Schedule: This is a full-time position. You will work 4-5 shifts per week (8 hours per shift), with 3 weekend shifts required per month. You will submit 4 days of unavailability per month. Pay: $53 base hourly rate + competitive tips (up to $15 per hour!) Locations You’ll Cover: Stevenson Ranch, Valencia, Porter Ranch & North Hollywood, plus occasional on-call and Mobile IV shifts. Why Hydration Room? • Monthly Pay Guarantee Program: For your first six months of employment, if your tips don’t average at least $10 per hour, we’ll make up the difference to ensure you’re always earning more., • Paid Time Off/Vacation Time for full-time team members, • Insurance: Medical, dental, vision, paid life insurance, and other voluntary benefits for full-time team members, • Future Planning: 401(k) for part-time and full-time team members, • Career Development Opportunities, • Exclusive Perks: Enjoy complimentary IV and injection therapy benefits, • Flexible Scheduling: We work with you to accommodate your availability!, • Parental Leave Program for full-time team members Clinic Hours: Team members must be available for scheduling during both morning/afternoon and afternoon/evening shifts within the hours of 8:00 AM to 8:00 PM. If you're ready to provide high-quality care in a clean, serene environment—this is your chance to make a meaningful impact every day. Apply today and join the Hydration Room team as a Registered Nurse (RN)! Core Role Responsibilities: • Maintain accurate, detailed reports and health records, • Promote membership programs, packages and treatment plans to patients, • Modify patient treatment plans as indicated by patients' responses and conditions, • Work with the District Manager to maintain nursing supplies inventory by checking stock to determine inventory level; anticipating needed supplies; placing and expediting orders for supplies; verifying receipt of supplies; using equipment and supplies as needed to accomplish job results, • Keep the clinic in compliance with Hydration Room inspections before and after each shift, • Maintain a safe, secure, and clean environment for customers, • Oversee Wellness Coordinator staff at clinics, • Maintain documentation of patient care services, • Train new staff, • Deliver Five Star Customer Service to ensure our patients have a positive experience in the clinic, • Perform other related duties as required and assigned by management staff, • Uphold standards of behavior as defined by the company's Core Values, Code of Conduct, and Operational GuidelinesRequirements:, • Current BLS certification required, • BSN or diploma in nursing, • Valid RN License with no sanctions, past or present, • Two years of related experience preferred, • Excellent verbal and written communication skills, • In-depth knowledge of IV Clinic procedures, • Proficient in-patient charting systems, scheduling systems, Microsoft Office, or related software, • Excellent organizational skills and problem-solving skills, • Understanding of great customer service, general sales, and patient care Physical Requirements: • Prolonged periods sitting at a desk and working on a computer, • Must be able to traverse the entire facility, • Must be able to lift up to 15 pounds at times This job description indicates in general terms, the type and level of work performed as well as the typical responsibilities of employees in this classification. The duties described are not to be interpreted as being all inclusive or specific to any employee. The use of a particular expression or illustration describing duties shall not be held to exclude other duties not mentioned. This description is not intended to limit or in any way modify the right of any manager or supervisor to assign, direct, and control the work of employees. An ability to competently perform all the essential functions of the position (the combination of all essential duties and all essential skills and abilities listed above), with or without reasonable accommodation, is a basic requirement of all positions at the Hydration Room. The Hydration Room is an equal opportunity employer and will make reasonable accommodations in accordance with applicable law so that qualified employees can perform the essential functions of the job. Nothing in this job description changes the at-will employment relationship existing between the Hydration Room and its employees. The Hydration Room reserves the right to amend this job description at any time.

Job Description At PetVet Care Centers, our mission is to improve the lives of animals and people — providing exceptional and compassionate care at every stage — for all the moments that matter. Because life is better with pets. We deliver the Ultimate Care Experience — every pet, every client, every time. That starts with a Culture of Care that supports our team members as much as the pets and clients we serve. With more than 420 locally led hospitals and over 11,000 team members nationwide, we offer: • Local autonomy with national support, • Career mobility and development opportunities, • A collaborative, inclusive environment where your wellbeing comes first You care for pets. We care for you. Position Overview We are seeking a compassionate and skilled Medical Director to join our team at Sweetwater Veterinary Clinic. The ideal candidate will be passionate about providing high-quality veterinary care and possess excellent communication skills to build lasting relationships with our clients. You will work alongside a team of experienced veterinarians, technicians, and support staff and will work closely with the Hospital Manager and Regional Manager. Sweetwater Veterinary Clinic in Santa Clarita, California is an established multi-doctor mixed animal practice, providing in-clinic small animal services and ambulatory large animal services. The team has been proudly providing families and their beloved pets with compassionate veterinary care since 1990. The small animal hospital is equipped to provide a full range of general practice, dentistry, and surgery services on site. Our large animal service is supported by two mobile veterinary units which carry a broad range of equipment and supplies that enable the staff to provide many diagnostic and treatment services on location including: x-ray, ultrasound analysis, and specialty farrier services. In addition to our normal emergency services for all animals, we provide 24 Hour Emergency Services for large animals. Why Join Us: • Our goal is to provide the personalized, gold-standard care for small animal, equine, and occasional small ruminant patients that our clients have come to expect from our doctors & staff over the years., • Our veterinarians work closely with our in-house professionals to provide integrated, multi-modal care customized to every client., • Southern California offers every sort of entertainment & outdoor activity imaginable to keep you plenty busy on your days off from work! Agua Dulce is located along California State Route 14, halfway between Santa Clarita and Palmdale, and is just 45 miles north of Los Angeles, in the Sierra Pelona Valley region of Southern California. If you prefer a country lifestyle, you can enjoy our local wineries, restaurants, hiking trails, and experience the great outdoors at the beautiful Vasquez Rocks natural area. If Los Angeles is more your speed, then exploring our many tourist attractions or catching a local sporting event is within an hour's drive. Ready to take the next step? Apply today! For questions or to connect directly, please email your resume to Sonni Nevarez at snevarez@petvetcarecenters.com. What We Offer We care deeply about supporting our team members — professionally and personally. Benefits include: • Signing, retention and relocation packages up to $75,000, • Medical, dental, and vision insurance, • Paid Parental Leave (birth, adoption, foster), • 401(k) with discretionary contribution, • Team Member Pet Discounts, • Emotional wellbeing support — including Calm app access and 24/7 EAP, • CE stipends and career development resources, • Grant Circle — a relief fund for team members facing personal hardship, • Local hospital culture backed by national resources Key Responsibilities • Maintaining a high quality of progressive veterinary care, • Oversees and gives directives regarding medical standards and quality of care, • Sets policies as they pertain to the practice of medicine, • Works toward making various services work as one team, • In conjunction with appropriate leadership team members, recommends additions to the hospital inventory, • Budgets for new equipment and provides a reasonable cost estimate and return on investment, • Sees patients and handles clinical practice, • Ensures positive communication with clients and between doctors, including the proper transfer of patient care responsibilities, • Reviews patient records for completeness and accuracy and uses them to promote medical excellence, • Appropriately manages controlled drugs, • Reviews and approves requests for alternatives to additional drugs and medical supplies, • Conducts regular doctor meetings, • Performs other duties as assigned by Manager, • Handles patient care problems, client complaints, and referral partner issues, • Manages veterinary, client, and board complaints and recommends resolutions, • Develops medical policies, • Assists in ensuring practice compliance with the State Veterinary Medical Practice Act, OSHA, and AAHA standards, • Monitors DVM performance and production, provides coaching when appropriate, • Serves as a mentor and role model for all staff veterinarians, • Leads candidate interviews of potential DVMs, • Identifies new service opportunities that do not currently exist in the hospital, • Holds ownership for the revenue and success of the practice through monitoring key performance indicators and works with the Hospital Manager to make adjustments to achieve positive results, • Helps identify and plan for upcoming challenges in maintaining hospital operations and possible temporary solutions (locum) Qualifications (Required) • Veterinarian degree (DVM or VMD) from an accredited college or university, • Current State Veterinary License, • DEA registration must be obtained and maintained, • 3-5+ years of experience in a veterinary practice, • Strong diagnostic and clinical skills., • Excellent surgical and dental skills., • Ability to work well in a team-oriented environment., • Exceptional interpersonal and communication skills., • Commitment to providing compassionate and high-quality veterinary care., • Excellent Communication Skills and the ability to communicate effectively, efficiently, and in a timely manner with all members of the Medical and Hospital staff., • Client communication skills, must be able to elicit information, establish rapport, offer explanations with pet owners., • Display confidence and reassurance when dealing with pets experiencing severe stress, illness, or pain., • May include some climbing, balancing, stooping, kneeling, crouching, or crawling., • Some tasks involve the periodic performance of moderately physically demanding work., • Position does require the ability to lift up to 50 pounds. Preferred Skills (Nice to Have) • Exceptional communication skills, both written and verbal, • Excellent time-management and delegation abilities, • Exercises sound judgment and demonstrates exemplary decision-making skills, • Professionalism and courtesy in all interactions with others, • Well-developed interpersonal skills Pay Range$120,000—$150,000 USD At PetVet Care Centers, we're committed to a Culture of Care — for pets, for the people who love them, and for the team members who make it all possible. With more than 420 hospitals across the U.S. and a team of over 11,000 dedicated professionals, including 1700+ veterinarians, we offer a unique blend of local leadership and national support that helps our hospitals thrive. Our model is built on partnership, collaboration, and local medical autonomy, empowering each hospital to deliver high-quality care while benefiting from shared resources and a strong professional community. Whether you're providing care in a hospital or supporting operations behind the scenes, PetVet is a place where you can grow your career, stay connected to your purpose, and make a meaningful impact. You care for pets. We care for you. PetVet is an equal opportunity employer. All employment decisions are made without regard to race, color, age, gender, gender identity or expression, sexual orientation, marital status, pregnancy, religion, citizenship, national origin/ancestry, physical/mental disabilities, military status or any other basis prohibited by law. EOE, M/F/D/V PetVet respects your privacy and is committed to protecting your personal information. Please see our privacy notice for additional information about our data practices.

Job Description Overview Join a Team That Changes Lives For more than 170 years, Elwyn has been leading the way in supporting children, teens, and adults with autism, intellectual and developmental disabilities, and behavioral health challenges. As a mission-driven nonprofit, we’re here to create real change – helping people lead meaningful, fulfilling lives. Now, we’re looking for passionate team members to join us. Here, your work will change lives – including your own. You’ll make an impact every day, find purpose in what you do, and grow in a career that truly matters. At Elwyn, we take care of you while you care for others. We offer: • Generous Paid Time Off, • Comprehensive Medical/Dental/Vision Benefit Packages, • Earned Wage Access/On-Demand Pay, • Paid On-the-Job Training, • Tuition Reimbursement, • Career Advancement Opportunities and Growth, • Flexible Schedules, • Retirement Savings Plan Join us and be a part of something bigger. Apply today. Responsibilities Elwyn is currently seeking a Program Administrator to work with our team. This exempt level position reporting to the Regional Director will have overall administrative and supervisory responsibility, case management coordination, and oversight for the 24/7 operations of one or two 962/853 residential homes.DUTIES AND RESPONSIBILITIES: • Responsible for ensuring that any suspicion of or knowledge of suspected abuse is reported in accordance with the law and program policies. "Mandated Reporter" (SOC 341), • Coordination of SB 962/853 program with Regional Center and DDS, • Maintain a safe, sanitary and therapeutic environment for all individuals served, • Ensures that the health care plan is implemented, • Ensures that self and staff adhere to all Elwyn California Policies and Procedures, standards of care and complies with all regulatory requirements, • Hiring, staffing, evaluating of employees, • Training of staff, • Coordinates ancillary services such as PT, OT, etc., • Budgeting, • Survey compliance and writing and implementing plans of correction, • Vendor selection, purchasing, • Program planning and case management, • Maintains communication with Executive Director, families, regional center, etc., • Has on call responsibility EDUCATION/EXPERIENCE/SKILLS REQUIREMENTS: • Successful experience in administering licensed residential services to people with developmental disabilities for at least one year, as evidenced by substantial compliance with the applicable state and federal licensing requirements, • Qualified applicants shall meet one or more of the following qualifications:, • Complete 35-hour administrator certification program, a licensed registered nurse;, • A licensed nursing home administrator;, • A licensed psychiatric technician with at least five years of experience serving individuals with developmental disabilities; or, • An individual with a bachelor's degree in the health or human services field and two years experience working in a licensed residential program for persons with developmental disabilities and special health care needs., • Ability to complete all trainings as required by applicable regulations, including, but not limited to, DSP1 and DSP2, Regional Center residential service orientation., • Must hold valid (current within one year of date of hire) or else complete a DOJ and FBI fingerprint and criminal clearance and a health screening including a TB test., • Strong interpersonal, communication, leadership skills., • Computer skills required., • Must possess a current, valid driver's license in state of residence, have a minimum of two (2) years of driving experience within the United States, and have an acceptable driving record.

Job Description The Quality Engineer will evaluate and/or appraise supplier's manufacturing capabilities to baseline their processes for conformance to various documented commodity checklists, and/or QMS special processes. Establishes part quality evaluation plans from materials requests through material receipt (full life-cycle). Provides resolution and disposition of non-conformance materials to ensure adequate corrective action. • The Quality Engineer is highly supplier-focused, requiring excellent interpersonal and communication skills (oral and written) to manage supplier quality assurance responsibilities and ensure compliance across and at all levels of the organization on major programs from design through production stages., • Evaluation of manufacturing functions and processes to ensure Quality Standards are in place, • Evaluation of inspection and testing processes, mechanisms and equipment; and performs statistical analysis to assess the cost of and determine the responsibility for, products or materials that do not meet required standards and specifications., • Participate in QMS Audits for process deficiency and correction., • Ensures that corrective measures meet acceptable reliability standards and that documentation is compliant with requirements., • Interact in the areas of design, incoming material, production control, product evaluation and reliability, inventory control and/or research and development as they apply to product or process quality., • Involved in lean and six-sigma quality engineering methodologies., • Will have 'hands-on' knowledge and experience of mechanical (Machine Shop) components, assembly, subsystem and system level concepts., • Strong emphasis on RCCA and CAPA experience., • Understanding of FMEA and Process Improvements and Standardization of Processes Required Skills: • Minimum 3-5 years with LEAN Manufacturing Application experience., • 3-5 years' experience in areas of Quality Engineering such as: FMEA, SPC, RCCA, Process Control, Product Evaluation and Auditing, • 2-3 years' working knowledge and experience with ISO9100 and AS9100 QMS Processes, especially in Production and Quality Engineering, • 2-3 years' working knowledge and experience with Aircraft Parts and Material Conformity Inspections, • 3-5 years FAI experience with AS9102 (FAI) Protocol, • 3-5 years' knowledge and experience with inspection methods, techniques and protocols., • 3-5 years' experience in understanding and the application of Engineering Mechanical Processes, Standard Drawings Conventions, Interpreting Drawing Specifications (ANSI 14.5) and GD&T, • 3-5 years' experience in understanding and the application of Electronic Assembly Process and Inspection, Standard Conventions (IPC-610, J-Std-1000), Interpreting Schematic Diagrams and Specifications, • Airframe experience required, • AVMS electronic experience required, • Strong English verbal and written communication skills, • Reliable transportation must have current/active drivers' license, • Valid drivers license and auto insurance required, • US citizenship required - Trigo ADR Americas can restrict hiring to US Citizens when government contracts require us to do so. 8 U.S.C. § 1324b(a)(2)(C). Required Education (including certifications): • In lieu of a Degree, 6+ years of hands-on experience as a Quality Engineering in an Aerospace Manufacturing Environment, • High School or GED Preferred Education and Skills (including certifications): • Bachelor's degree is preferred from an accredited college in technical discipline (e.g., Industrial Engineering, Mechanical Engineering, Quality Management), • Proficient with Microsoft Office Products (Excel, Outlook, PowerPoint, Word), • Compatible certifications or related college courses, • Team-minded, communicative, proactive, stress-resistant, assertive, • Strong interpersonal communication and problem-solving skillsWORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the TRIGO team, and external customers. Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Benefits: • TRIGO AERO GROUP provides a 2% vacation bonus (2% of salary, excluding reimbursable expenses) for employees who meet the following conditions:, • One year of continuous employment, • Minimum of 1,400 hours worked in the year, • The hours calculation resets after every year, • 401k with employer match – available after 90 days of employment, • Full Time Benefit Package Includes: Comprehensive Medical Insurance, Dental Insurance, Vision Insurance, Life Insurance, Critical Illness Insurance, FSA Health and Short-Term Disability. Pay Range: $35 to $42 hourly, please note that the salary information is a general guideline only. Trigo considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Powered by JazzHR 2fH09TGTJp

Job DescriptionMake a Meaningful Impact as a Case Supervisor at Alora Behavioral Health! Imagine being part of a child's breakthrough moment - their first words, first friendships, first steps toward independence. As a Case Supervisor (CS) at Alora Behavioral Health, you'll play a key leadership role in helping children and young adults build life-changing skills while supporting families through meaningful progress. With over 40 years of compassionate care and a strong foundation in specialized Applied Behavior Analysis (ABA) services, Alora is proud to serve communities across Southern California - and we're growing! If you're ready to take the next step in your ABA career while working alongside an experienced and supportive clinical team, we'd love to meet you. Why You'll Love This Role At Alora, we don't just offer jobs - we offer careers with purpose, growth, and support. • Make a direct and lasting impact on children and families, • Collaborate closely with experienced BCBAs and clinical leaders, • Step into a leadership-focused role mentoring Behavior Technicians, • Flexible scheduling with Part-Time and Full-Time opportunities, • Ongoing professional development and career advancement pathways, • Be part of a mission-driven, supportive, and people-first cultureWhat You'll Do As a Case Supervisor, you will: Lead and mentor Behavior Technicians through coaching, support, and supervision Oversee services for clients Assist in developing and implementing individualized behavior intervention plans Partner with families through training, communication, and collaboration Ensure clinical quality, documentation, and compliance with funding sources Contribute to a culture of excellence, learning, and continuous improvement What You Bring to the Team We're looking for passionate professionals who are ready to grow and lead: MA/MS in ABA, Psychology, or a related field At least 2 years of experience designing or implementing behavior analytic services (BCBA coursework units preferred) Valid driver's license, reliable transportation, and ability to travel within assigned areas Ability to meet onboarding and pre-employment requirements Compensation & Benefits $22.00 – $28.00 per hour (DOE) Eligible team members also enjoy: Medical, Dental, and Vision benefits Ongoing training and professional development Supportive clinical mentorship and advancement opportunities A career path with long-term growth in the ABA field Join a Team That Truly Cares At Alora Behavioral Health, we believe meaningful work happens when people feel supported, valued, and empowered. If you're ready to grow your ABA career while making a difference every day, we'd love to hear from you. Apply today and start building a career where your impact matters most. EEO Statement Alora Behavioral Health is an equal opportunity employer and is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, gender identity, or any other characteristic protected by law. ADA Accommodation Alora Behavioral Health is committed to providing reasonable accommodations to individuals with disabilities in accordance with the Americans with Disabilities Act (ADA) and applicable state and local laws. If you require accommodation due to a disability to participate in the application process, please contact HR at hr@alorabh.com to request assistance. Case Supervisor ABA, ABA Therapy Supervisor, Behavior Technician Supervision, BCBA Track Job, Applied Behavior Analysis Careers, RBT Supervisor, Behavior Intervention Plans, Clinical ABA Leadership

Job Description POSITION SUMMARY The Product Line Manager will lead the development, positioning, and lifecycle management of these product portfolios. This role will be responsible for driving product strategy, ensuring market competitiveness, and delivering innovative products that align with brand objectives and customer needs. This includes gathering metrics for presentations (business cases, retrospective analyses, and weekly new product committee meetings). Efforts focused on improving existing products and researching, developing and launching new products. Responds to company initiatives by driving new products to meet customer needs. Ensures that products conform to safety standards. Checks possible flaws of existing products and apply the necessary improvements/enhancements KEY RESPONSIBILITIES: • Grows company revenue by developing new products and correcting flaws in current products, • Manages product certification process, • Drive innovation in materials, ergonomics, durability, and performance and develops prototypes with partnering factories, • Lead end-to-end product development for glove product lines from concept through commercialization, • Works with vendors to develop new products and identify issues with incoming products, • Participates in quality assurance process, • Works with product management team to ensure process is efficient, • Ensures revenue and customer satisfaction goals are met, • Advises vendors on best practices and methods to correct issues, • Support go-to-market strategies, including product positioning, messaging, and training materials, • Required to travel domestically and internationally for research, product development meetings, customer meetings, and site visits with factories, • Performs other duties as assigned MINIMUM QUALIFICATIONS: EDUCATION • Bachelor’s degree in Product Design (or related certification) required. EXPERIENCE • 7–10+ years of product development, preferably in PPE., • Experience working with domestic and international factories, • Strong technical understanding of protective materials, garment engineering, and performance testing. PREFERRED SKILLS • Strong development skills and understanding of manufacturing processes, materials and product construction and fit, • Leadership skills: experience in managing design/technical design staff to develop quality products, • Ability to recognize and resolve problems quickly using sound judgment and diplomacy, • Proficiency in Design software, Adobe Illustrator, Excel, Word, and Outlook, • Ability to effectively present information in one-on-one and group situations to vendors, customers, clients, and other employees, • Ability to communicate technical information via tech packs and email, • Ability to apply common sense understanding to carry out detailed but uninvolved written and oral instructions, • Ability to deal with problems involving few concrete variables in standardized situations, • Exceptional organization skills required, • Ability to multi-task TRAVEL Occasional. ADDITIONAL INFROMATION The Salary Range for this position at Mechanix Wear, LLC is $90,000 - $125,000k Annual (USD). Starting pay for the successful applicant depends on a variety of job-related factors, including but not limited to market demands, experience, training, skills, and education. The benefits available for this position include medical, dental, vision, 401(k) plan, life insurance coverage, wellness benefits, education reimbursement program, and Vacation time. Mechanix Wear is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact the Mechanix Wear Human Resources department. Mechanix Wear will consider employment-qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring.

Job Description CNC Programmer I, 3 Axis Full Time + Benefits (Medical, Dental, Vision, 401k with Company Match, PTO) Job Type: Onsite Hourly Range: $26.00 - $39.00, DOE Shift Differential: 10% Shift: 2nd Location: Valencia, CA Fralock is an engineered solutions provider of specialty components and subassemblies using advanced materials for high reliability, severe environment, and technically challenging applications. We develop and manufacture custom integrated solutions. Established in 1967, we are a critical solutions provider to Fortune 500 corporations, government, and targeted OEMs in a variety of industries including Semiconductor Equipment Manufacturing, Medical and Life Science, Aerospace and Defense, Industrial, Electronics, and Energy. Fralock is headquartered in Valencia, CA with manufacturing locations located throughout Northern and Southern California. VISION To be recognized by our customers as a leading solutions provider of proprietary engineered advanced materials for high reliability, severe environment, and technically challenging applications. MISSION To create value, profitably grow, and share our success with all stakeholders. CULTURE • Respect – We treat others the way they want to be treated., • Integrity – We practice a high standard of ethics in our business dealings with customers, suppliers and employees., • Responsiveness – We have a sense of urgency in responding to internal and external requests and work proactively to solve problems., • Excellence/Competence – We empower our people to continuously improve and execute high quality work., • Teamwork – We work together to achieve Fralock business objectives by communicating at a high level, by listening and having clarity in our expectations of one another., • Individual Accountability and Personal Responsibility – We do what we have committed to do when we committed to doing it., • Continuous Improvement across all segments of the company This position requires access to information controlled under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR), the successful candidate must be a "U.S. person" as defined in the ITAR and EAR (which generally means (i) be a citizen or national of the United States; or (ii) be a lawful permanent resident of the United States; or (iii) have been admitted to the United States as a refugee, or have been granted asylum, as specified under applicable law. Main Functions • Create 3 axis CAD/CAM programs and process files from DXF and PDF files, • Save programs from job transfer files to appropriate job files, • Set up machine and produce parts, • Evaluate, Create, Utilize tool library according to materials, • Provide technical assistance, • Conduct technical training, • Observe, evaluate, and correct operator work for conformance, • Participating in 5S and Lean /CI This position requires access to information controlled under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR), the successful candidate must be a "U.S. person" as defined in the ITAR and EAR (which generally means (i) be a citizen or national of the United States; or (ii) be a lawful permanent resident of the United States; or (iii) have been admitted to the United States as a refugee, or have been granted asylum, as specified under applicable law. Typical Duties • Set-up and run job orders according to the program and process files, • Measure and record products or materials to control quality, • Train CNC Operators/Programmers, • Create process files, • Collaborate with the Engineering group, • Maintain machine operation and detect problems as they might occur, • Apply Procedures and Work Instructions, • Support safety procedures and safe practices, • Report process or equipment deficiencies, • Assist supervisor with section personnel and work-center operations, • Clean equipment or machinery, • Safety & Continuous Improvement, • Follow all safety rules and promote safe work practices, • Participate in 5S, Lean Manufacturing, and Continuous Improvement initiatives, • Maintain a clean and organized work area and support departmental housekeeping standards, • Report safety, process, or equipment issues promptly Required Skills • Excellent attention to detail, • Excellent organizational skills, • Microsoft Office, • Ability to read, comprehend and follow instructions and directions, • Compare for correctness, count accurately, • Good communication skills, Strong team player., • Good interpersonal skills and ability to deal effectively with individuals at all levels., • Self-starter with demonstrated ability to achieve results and respond to change., • Results and action oriented, • Positive attitude, • Ability to use precision tools, Micrometers, Calipers., • Basic Mathematics for daily use formulas, • Critical Thinking to solve converting and manufacturing issues, • Troubleshooting ability to utilize relevant knowledge, • Read and understand blueprints. Preferred Skills • Multi-tasking, Digital Cutters, CO2 lasers, Hybrid Lasers, Mills, Some college a plus,, • Phone etiquette, Cleanroom experience, GD&T experience/training, NC CAM experience Education Requirements High school diploma/GED/ five (5) year’s work experience Experience Requirements • One-year 3-axis CNC programming through school and/or OJT, • Two years 3-axis CNC operator in a manufacturing environment Physical Requirements • Requires using hands to handle tools or controls., • Requires repetitive movement., • Must have vision (with or without assistance) capable of seeing small objects at a close distance., • Requires prolonged standing/sitting., • Requires lifting to 25lbs. Working Conditions Working indoors in environmentally controlled conditions. A cleanroom environment requires wearing smocks, hairnets, shoe-covers, and gloves, may reach temperatures as low as 66F. Safety-toed shoes are required and other Personal Protective Equipment (PPE), as needed. All offers of employment at Fralock are contingent upon clear results of a background check. Background checks may include some or all the following depending on job title and responsibilities: • Social Security Verification, • Prior Employment Verification, • Criminal History, • Personal and Professional References, • Motor Vehicle Records, • Credit History Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of a position. Fralock provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.