Trabajos lower en Irving, TexasCrear alertas

_ Become A US FOODS® CDL A Delivery Driver Advance your career in the foodservice industry with US Foods! Enjoy a comprehensive benefits package along with a strong safety culture that supports your success. Class A Drivers start at $33.40 per hour plus overtime after 40 hours in a week! Schedule & Location • Monday - Saturday, 5 days. Start times range between 2am - 6am, • Garland, TX Benefits Day One From affordable health care to retirement savings, your benefits begin immediately, not weeks later! Get all the details _. CDL A Delivery Driver – Position Overview Join us in delivering more than just food; we deliver trust, reliability, and a promise of excellence. You'll safely navigate the highway and city streets, back into tight docks, and unload with precision. The CDL A Delivery Driver role goes beyond simply transporting goods - it’s about perfecting the craft of delivery, earning trust mile by mile, and serving as a vital link to our customers. Key Responsibilities • Safe Driving: Deliver products to our customers in a timely and safe manner., • Unloading: Skillfully unload products efficiently using a two-wheeler, ramp, or by hand, placing them in the designated storage areas – 100% touch freight., • Delivery Verification: Verify deliveries with customers & secure signatures., • Customer Service: Provide professional service to enhance customer experience., • Equipment Inspection: Conduct pre- & post-trip inspections to uphold safety standards., • Account Management: Handle collections and payments when applicable., • Adaptability: All other duties assigned by management. Physical Requirements • Lift/carry/push/pull/lower 20 to 80+ lbs. of product repetitively during each shift required., • Driving & working in inclement weather conditions with frequent stops (10+ per shift) required., • Comfortable working in a multi-temperature environment as low as 0 degrees., • Continuously grasp objects & manipulate objects. Frequently sit, stand, walk, drive, climb/balance, stoop/squat, kneel/bend, bend, reach above shoulder, twist, and use manual dexterity. Qualifications • Register to the FMCSA Clearinghouse*, • Must be at least 21 years of age., • Must have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualifications., • Minimum 6-months commercial driving experience (any industry) OR 3-months commercial driving experience in the food and/or beverage delivery industry required., • Ability to operate manual transmission preferred; may be required in specific locations., • Must be able to read and communicate in the English language - able to hold a conversation, to understand highway traffic signs and signals, to respond to official inquiries, and to enter information on reports and records. About US FOODS® Click _ to learn more! *Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to visit the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver’s license (CDL) and commercial learner’s permit (CLP) holders’ drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit _ and click GO to login. If you are able to login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page. Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law (for example: state minimum wage thresholds). The expected base rate for this role is $33.40 Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click _. *EOE – Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Age/Genetic Information/Protected Veteran/Disability Status*

Job Description Join Team Royal! Why Royal? At Royal Electric Company we provide expert electrical design, construction, and service with builders, contractors and facility owners who value relationships, trust, expertise, and a commitment to each other towards achieving exceptional results. We believe in transforming the culture of construction, creating a space where everyone feels they belong. We are proud to support initiatives like "Breaking Barriers," showcasing the incredible contributions of women in our industry. Breaking Barriers: Women At Work Episode 1 We are able to sustain this through our linking values of expertise, collaboration, integrity, passion, and loyalty. These values support our core purpose; to build great relationships, one project at a time! We believe in taking care of our team. From comprehensive wellness programs to continuous learning opportunities, we invest in your growth and well-being. One Royal Culture Short Story Royal Electric Company is hiring for Certified Electrical Apprentice for our Multifamily Residential and Commercial projects in Dallas, TX. Position Summary: The Electrical Apprentice will perform work under the guidance of a journeyman electrician, efficient installation of electrical work, training, and quality control. Responsibilities: Essential Functions Include but not limited to: • Measure, cut, and bend wire and conduit, using measuring instruments and hand, • tools., • Maintain tools, vehicles, and equipment and keep parts and supplies in order., • Perform semi-skilled and unskilled laboring duties related to the installation, maintenance and repair of a wide variety of electrical systems and equipment., • Disassemble defective electrical equipment, replace defective or worn parts, and reassemble equipment, using hand tools., • Thread conduit ends, connect couplings, and fabricate and secure conduit support brackets, using hand tools., • Examine electrical units for loose connections and broken insulation and tighten connections, using hand tools., • Drill holes and pull or push wiring through openings, using hand and power tools., • Clean work area and wash parts., • Dig trenches or holes for installation of conduit or supports., • Strip insulation from wire ends, using wire stripping pliers, and attach wires to terminals for subsequent soldering., • Trace out short circuits in wiring, using test meter., • Install copper-clad ground rods, using a manual post drive., • Break up concrete, using air hammer, to facilitate installation, construction, or repair of equipment., • Erect electrical system components and barricades, and rig scaffolds, hoists, and shoring., • Transport tools, materials, equipment, and supplies to work site by hand, hand trucks, or heavy, motorized trucks., • Construct controllers and panels, using power drills, drill presses, taps, saws and punches., • Raise, lower, or position equipment, tools, and materials, using hoist, hand line, or block and tackle., • Requisition materials, using warehouse requisition or release forms. Requirements • Must posses a current and valid Texas Electrical Apprentice Certification, • NOTE: Include your Certification Number when applying, • Must have electrical skills, including, but not limited to; plan reading, layout, various conduit bending, wire pulling, and ability to follow directions, • Must be proficient with the use of hand power tools, • Must have reliable transportation and your own hand tools Special Considerations: • Commercial/Multi-family project experience preferred, • Ability to be badged at airport for access purposes, • Willingness to work night shifts and/or overtime Salary Range: • $26.00 -$35.00/hr, • Note: This is a Private Base Rate. This position is Prevailing Wage/Davis Bacon Eligible depending on project assignment. Additional fringe benefits may per project designated wage determination. We offer competitive wages plus benefits and 401(k). Royal is proud to be an equal opportunity workplace. Individuals seeking employment at Royal are considered without regards to age, ancestry, color, race, gender (including pregnancy, childbirth, or related medical conditions), gender identity or expression, sexual orientation, genetic information, marital status, medical condition, mental or physical disability, national origin, protected family care or medical leave status, religion, military or veteran status, or any other characteristic protected by federal, state, or local laws. We utilize E-Verify to confirm work authorization with both the Social Security Administration and the Department of Homeland Security. E-Verify Link: http://www.uscis.gov/e-verify/employees We promote a drug free workplace. Benefits Health • Health Care Plan (3 types of Medical plans, Discounted Dental & Orthodontist services for adults & children, Premium Vision Plan), • Retirement Plan (Traditional 401k, Roth 401k)., • $50k Life Insurance (Basic, Voluntary, & AD&D), • Paid Time Off (Vacation, Sick Leave, and Paid Holidays), • Family Leave FMLA (Maternity & Paternity), • Short Term & Long-Term Disability, • Pet Insurance, • Flex Spending Accounts: Healthcare, Dependent care (Daycare children & elderly – work related), & Transit, • Pharmacy discounts, • Kisx Card (Surgery & Imaging Program), • Opportunity for tuition reimbursement Wellness Resources • Free telehealth, • Health Joy App, • Free peer coach support - (mental health, stress management, substance use, and suicidal ideation), • CancerCARE 1:1 Consulting and support with expert medical team, • Employee Assistance Support, • Hearing Aid discount plan, • Laser VisionCare discount plan Learning & Development • Safety training: Getting Everyone Home Safely, • Professional & Leadership Development Training, • Skill Development Training, • Mentorship Program, • On-The-Job & Classroom Training Employee Referral Program: We value referrals from our employees! If you know someone who would be a great fit for this role, please refer them through our company’s referral program. Successful referrals can earn you an incentive!

Job Description Join Team Royal! Why Royal? At Royal Electric Company we provide expert electrical design, construction, and service with builders, contractors and facility owners who value relationships, trust, expertise, and a commitment to each other towards achieving exceptional results. We believe in transforming the culture of construction, creating a space where everyone feels they belong. We are proud to support initiatives like "Breaking Barriers," showcasing the incredible contributions of women in our industry. Breaking Barriers: Women At Work Episode 1 We are able to sustain this through our linking values of expertise, collaboration, integrity, passion, and loyalty. These values support our core purpose; to build great relationships, one project at a time! We believe in taking care of our team. From comprehensive wellness programs to continuous learning opportunities, we invest in your growth and well-being. One Royal Culture Short Story Royal Electric Company wants you to bring your skill and expertise as a Journeyman to us and join our team!!! Whether you've got experience with multifamily residential, commercial, service, or all of it, we've got work for you! We have current opening for a Certified Journeyman Electrician for our Airfield Lighting project at Dallas Fort Worth International Airport (DFW) in Dallas, TX. Position has opportunity to work on various other airfield lighting projects. Equal Opportunity/Affirmative Action Employer: Women, veterans and minorities are encouraged to apply. Success in the position is achieved through the following duties & responsibilities: The Journeyman Electrician will provide leadership, efficient installation of electrical work, training, and quality control. The Journeyman may also be responsible for the development of apprentices and trainees assigned to them. Who you are: • Safety Oriented - You are dedicated to maintaining a safe work environment, ensuring that both you and your team adhere to safety protocols on the jobsite., • Focused - The small things matter to you. You bring a keen attention to detail., • Relationship Builder - You work to build trust and relationships at all levels, cultivating collaboration, shared success, and mutual respect., • Critical Thinker - You're willing to be innovative, challenge yourself, and try new things., • Deadline Driven - You're prepared to put extra effort when it's needed to meet the deadlines that are critical to this industry. Requirements Responsibilities • Take lead to delegate tasks & train craftworkers, ensuring effective communication regarding work plans and smooth operations., • Demonstrate initiative, supporting team success and safety., • Perform installation, repair, maintenance, and testing of electrical systems across commercial, industrial, and residential settings., • Utilize hand and power tools to measure, cut, bend, thread, and install wire and cable systems, conduits, and raceways., • Feed, pull, and terminate wires within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, and switches., • Troubleshoot issues and prepare sketches and schematic diagrams. Take ownership and anticipate needs., • Maintain high workmanship standards, ensuring quality and efficiency; effort and initiative directly reflect in project and personal success. EDUCATION & EXPERIENCE • Must posses a current and valid Texas Journeyman Certification, • NOTE: Include your Certification Number when applying, • Must have electrical skills, including, but not limited to; plan reading, layout, various conduit bending, wire pulling, and ability to follow directions, • Must be proficient with the use of hand power tools, • Must have reliable transportation and your own hand tools Special Considerations: • Airfield Runway/Runway Lighting Experience Preferred, • Underground Experience Preferred, • Must be eligible for airport badging process, • Ability to work at surrounding airportsRequired Skills & Abilities, • Install, repair, maintain, and test commercial, industrial and residential electrical systems, • Use industry related hand tools and power tools, • Measure, cut, bend, thread, etc. and install wire and electrical cable systems, conduit systems and other wire raceway systems., • Splice and terminate wires at junction points, • Prepare sketches and schematic diagrams showing the location of wiring and electrical systems, • Delegate tasks and assist with training other employees, • Communicate effectively with Foremen and crew members, • Adhere to all Royal Electric Company safety procedures and protocolsSafety Requirements, • Must wear proper PPE while on jobsites., • Must comply with all safety standards and procedures.Work Environment, • While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration., • The employee is occasionally exposed to a variety of extreme conditions at construction job sites., • The noise level in the work environment and job sites can be loud., • The position regularly works near moving mechanical parts and in outside conditions that include inclement weather, heat and humidity, and exposure to dust and asphalt., • Physical Demands, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • The position walks and stands for long periods of time, may require climbing / working from ladders or stairs, MEWPs to reach elevations, and performs physical labor under adverse field conditions., • The employee lifts, pushes, pulls, or carries objects up to 75 pounds; uses abdominal and lower back muscles to provide support overtime without fatigue., • Tasks often may require bending/stooping, twisting, reaching at all levels, squatting and occasional kneeling and crawling., • The position requires good manual dexterity (hand, hand with arm, two hands) and multi-limb coordination., • The position requires the ability to quickly move arms and legs., • The employee must have excellent stamina, • 10 hour shifts, • 6 days a week Salary information: • $40.00/Hr - $45.00/Hr, • This is an non-exempt role. We offer competitive wages plus benefits and 401(k). Royal is proud to be an equal opportunity workplace. Individuals seeking employment at Royal are considered without regards to age, ancestry, color, race, gender (including pregnancy, childbirth, or related medical conditions), gender identity or expression, sexual orientation, genetic information, marital status, medical condition, mental or physical disability, national origin, protected family care or medical leave status, religion, military or veteran status, or any other characteristic protected by federal, state, or local laws. We utilize E-Verify to confirm work authorization with both the Social Security Administration and the Department of Homeland Security. E-Verify Link: http://www.uscis.gov/e-verify/employees Applicants must be authorized to work in the United States. Royal Electric is unable to sponsor or take over sponsorship of employment Visa at this time. We promote a drug free workplace. Benefits • Health Care Plan (3 types of Medical plans, Discounted Dental & Orthodontist services for adults & children, Premium Vision Plan), • Retirement Plan (Traditional 401k, Roth 401k)., • $50k Life Insurance (Basic, Voluntary, & AD&D), • Paid Time Off (Vacation, Sick Leave, and Paid Holidays), • Family Leave FMLA (Maternity & Paternity), • Short Term & Long-Term Disability, • Pet Insurance, • Flex Spending Accounts: Healthcare, Dependent care (Daycare children & elderly – work related), & Transit, • Pharmacy discounts, • Kisx Card (Surgery & Imaging Program), • Opportunity for tuition reimbursement Wellness Resources • Free telehealth, • Health Joy App, • Free peer coach support - (mental health, stress management, substance use, and suicidal ideation), • CancerCARE 1:1 Consulting and support with expert medical team, • Employee Assistance Support, • Hearing Aid discount plan, • Laser VisionCare discount plan Learning & Development • Safety training: Getting Everyone Home Safely, • Professional & Leadership Development Training, • Skill Development Training, • Mentorship Program, • On-The-Job & Classroom Training Employee Referral Program: We value referrals from our employees! If you know someone who would be a great fit for this role, please refer them through our company’s referral program. Successful referrals can earn you an incentive!

Holt CAT is the largest Caterpillar dealership of heavy equipment in the United States. We have a full-time, 1st shift Engine Shop Service Technician position available at our Irving, Texas location. The hours of the position are Monday-Friday from 7 AM - 4 PM. This position is responsible for providing high-quality teardown, inspection, and repairs of diesel engines and natural gas engines in a shop environment, responding to customer needs in a positive, caring, and timely manner, and ensuring maximum value for work performed. Works as a member of a team to provide basic mechanical services that satisfy customer needs and achieve departmental goals. • Performs disassembly and assembly, complex repairs correctly, inspections, test running, and painting of industrial gas or diesel engines or related components to manufacturer’s specifications through the use of hand tools, pneumatic tools, and any specialized tooling, • Demonstrates knowledge of estimating, planning, and controlling the cost of repair jobs, • Completes parts orders and identifies parts for return, • Maintains all equipment and work areas – keeps in good, clean, and orderly condition, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Works overtime as required by workload and customers’ needs, • Updates job knowledge by participating in educational opportunities; e.g., ProTech Technician Training Paths, • Performs other duties as assigned, • General knowledge of industrial natural gas or diesel engines and tools, including their designs, uses, repair, and maintenance, • Demonstrates proficiency with current computer software, related hardware, and machine electronic systems, • Quality control analysis skills - Conducting tests and inspections of products, services, or processes to evaluate quality or performance, • Operation and control skills - Controlling operations of equipment or systems, • Equipment selection skills - Determining the kind of tools and equipment needed to do a job, • Ability to operate a forklift and an overhead crane, • The ability to quickly and repeatedly operate the controls of a machine or a vehicle to exact positions, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair, • The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects, • The ability to read, write, and understand information, • The ability to listen to and understand information and ideas presented through spoken words and sentences Additional Requirements: • Must have hand and pneumatic tools (metric/standard), • Must have appropriate tooling equipment to complete the job Education and Experience: • Two or more years of work-related skill, knowledge, or experience is preferred, • High school diploma or equivalent preferred, • Technical diesel schooling preferred Physical Requirements:, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently moves materials or equipment weighing up to 50 pounds, • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Be able to maneuver safely and work underneath equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work Work Environment:, • Regularly works indoors around moving mechanical parts, • May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • The noise level may be loud at times, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment, • Requires wearing common protective or safety equipment, • Required to perform work in cramped spaces and/or high places Travel:, • Travel may be required for training Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #HOLTJH #LI-HCT LI-JH1 #HOLTCAT #CAT #Diesel #IndustrialEngines #EngineRebuild #CaterpillarEngines HOLT CAT is the authorized Caterpillar® heavy equipment and engine dealer for 118 counties in South, Central, North and East Texas. Established in 1933, HOLT sells, services and rents Cat equipment, engines, generators and trucks for construction, mining, industrial, petroleum and agricultural applications. HOLT sells Caterpillar used equipment worldwide and fabricates its own line of custom engineered products including land management products and water tankers. Additionally, HOLT is a dealer for Link-Belt® Cranes, Trimble® Heavy and Highway construction products and AccuGrade® grade-control systems. The Holt name has been associated with heavy equipment and Caterpillar for over 100 years. HOLT CAT owners, Peter J. Holt and Corinna Holt Richter are direct descendants of Benjamin Holt, who in 1904 developed the first successful track-type tractor which he named the “Caterpillar.” HOLT CAT has come to be synonymous with quality, integrity and commitment to customer service. The HOLT CAT team is committed to providing rock solid stability with superior products and services from The Red River to the Rio Grande™.

HOLT CAT in Irving Texas is looking for a experienced heavy construction equipment shop service technician. This mechanic position is responsible for performing inspections, diagnoses, and repairs of diesel-powered heavy construction equipment and/or related equipment or components, following established procedures and guidelines. Can work independently or as a member of a team to provide mechanical services that satisfies customer needs and achieves departmental goals. We are located at 3131 State Highway 161, Irving, TX 75062. The hours for this position are Monday thru Friday, 7am to 5pm. Mid-level position – Generally has more than four years of experience and/or demonstrated job relevant knowledge/skills. A Level III Technician has moderate knowledge of the field’s standard and technical concepts, practices, and procedures. Level III Technician performs a variety of standard, complex, and technical tasks; is indirectly supervised and self-starting; often a team member on a large project. • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Troubleshoots and diagnoses equipment malfunctions and failures, • Disassembles and assembles of machine components to manufacturer’s specifications through the use of hand tools, pneumatic tools, and any specialized tooling, • Rebuilds, repairs, reconditions, and maintains equipment and components, • Demonstrates good customer relations and support; communicates customer needs to shop management, • Plans and controls cost of repair jobs, • Completes parts orders and identifies parts for return, • Mentors and helps train other technicians, • Maintains all equipment and work areas – keeps in good, clean, and orderly condition, • Completes all documents associated with repairs in a timely manner, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Works overtime as required by workload and customers’ needs, • Updates job knowledge by participating in educational opportunities; e.g., ProTech Technician Training Paths, • Requires regular and punctual employee attendance, • Performs other duties as assigned The incumbent in this position is expected to model the following practices on a daily basis:, • Demonstrate alignment with the company's mission and core business values, • Collaborate with key internal/external resources, • Participate in ongoing self-development., • Knowledge of CAT machines and tools, including their designs, uses, repair, and maintenance, • Knowledge of heavy constricton equipment machines such as dozers, excavators, motor graders, and other dirt moving equipment preferred, • Demonstrates proficiency with current computer software, related hardware, and machine electronic systems CAT ET or CAT SIS, • Knowledge of aftertreatment repairs, troubleshooting and diagnosing safely, • Knowledge of complex hydraulic system repair, troubleshooting, and diagnosing safely., • Knowledge of complex electrical systems repair, troubleshooting and diagnosing safely, • Quality control analysis skills - Conducting tests and inspections of products, services, or processes to evaluate quality or performance and communicate findings, • Operation and control skills - Controlling operations of equipment or systems, • Equipment selection skills - Determining the kind of tools and equipment needed to do a job, • Ability to operate a conventional forklift and an overhead crane, • The ability to quickly and repeatedly operate the controls of a machine or a vehicle to exact positions, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair, • The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects, • The ability to read, write, and understand information, • The ability to listen to and understand information and ideas presented through spoken words and sentences, • Must have/acquire basic mechanic hand and pneumatic tools (metric/standard) Education and Experience: • Four or more years of diesel-powered heavy equipment repair experience preferred, • Ability and knowledge to read/use schematics and diagrams experience is preferred, • High school diploma or equivalent preferred, • Graduation from a diesel technology program preferred Supervisory Responsibilities:, • NoneTravel:, • Some travel is expected for this positionPhysical Requirements:, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently moves materials or equipment weighing up to 50 pounds, • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Be able to maneuver safely and work underneath equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work Work Environment:, • Regularly works indoors around moving mechanical parts, • May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Noise level may be loud at times, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high speed rotating equipment, • Requires wearing common protective or safety equipment, • Required to perform work in cramped spaces and/or high places Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #HOLTJH #HOLTCAT #CAT #CATERPILLAR #HEAVYEQUIPMENT #DOZER #EXCAVATOR #MOTORGRADER #SCRAPER #SKIDSTEER #MINI-X #TRACKLOADER #WHEEL_LOADER #HYDRAULICS #DIESELENGINE #AFTERTREATMENT #DFP/DEF HOLT CAT is the authorized Caterpillar® heavy equipment and engine dealer for 118 counties in South, Central, North and East Texas. Established in 1933, HOLT sells, services and rents Cat equipment, engines, generators and trucks for construction, mining, industrial, petroleum and agricultural applications. HOLT sells Caterpillar used equipment worldwide and fabricates its own line of custom engineered products including land management products and water tankers. Additionally, HOLT is a dealer for Link-Belt® Cranes, Trimble® Heavy and Highway construction products and AccuGrade® grade-control systems. The Holt name has been associated with heavy equipment and Caterpillar for over 100 years. HOLT CAT owners, Peter J. Holt and Corinna Holt Richter are direct descendants of Benjamin Holt, who in 1904 developed the first successful track-type tractor which he named the “Caterpillar.” HOLT CAT has come to be synonymous with quality, integrity and commitment to customer service. The HOLT CAT team is committed to providing rock solid stability with superior products and services from The Red River to the Rio Grande™.

The Shop Service Paving Technician is responsible for the inspection, troubleshooting, diagnosing, repairing, and reconditioning of paving construction equipment in a shop environment. The hours for this position are Monday through Friday, 7:00 AM to 5:00 PM. We are located at 2000 East Airport Freeway, Irving, Texas 75062. CAT Paving Equipment Repair Preferred The incumbent in this position is expected to model the following practices on a daily basis: • Demonstrate alignment with the company's mission and core business values;, • Collaborate with key internal/external resources;, • Participate in ongoing self-development., • Performs repairs and troubleshooting with minimal supervision, • Performs troubleshooting and diagnoses of paving equipment malfunctions and failures, • Removes and install parts, disassembles and assembles components, and tests and adjusts assemblies, • Repairs and/or replaces components according to CAT standards, • Tests and verifies proper operation of all repairs and adjustments, • Prepares and completes all job related documents, writes service reports, orders parts, and maintains clear customer records; in addition, accesses databases required to complete job (work order, parts order, Vision Link, DBS, SimsSI, SIS web), • Operates equipment and vehicles with possession of all necessary licenses and certificates, • Adheres to contamination control and HAZMAT rules and regulations, • Maintains all company equipment, tools, and vehicle in good, clean, and working order, • Communicates job progress to supervisor and customer as needed, • Complete assigned jobs and task to meet/exceed flat rate times and re-do metric standards, • Works overtime as required by workload and customers’ needs, • Completes all assigned Technician Training Path courses and safety training in a timely and proficient manner, • Projects professionalism with both internal and external customers, including personal appearance, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Requires regular and punctual employee attendance, • Performs other duties as assigned, • Knowledge of complex grade control systems, special software/hardware required for machine communication and diagnoses, intelligent compaction, machine application, asphalt densities, mat deformities, and correct machine operation procedures, • Knowledge of equipment and tools, including their designs, uses, repair, and maintenance, • Knowledge of safe work procedures and practices, • Demonstrates proficiency with current computer software, related hardware, and machine electronic systems, • Exceptional skills in customer service, • Excellent diagnostic and trouble-shooting skills, • Planning and organizing skills to prioritize and plan work activities; uses time efficiently; plans for additional resources, • Operation and control skills to control operations of equipment or systems, • Equipment selection skills to determine the kinds of tools and equipment needed to do a job, • Ability to communicate clearly and effectively, both verbally and in writing, • Ability to operate a conventional forklift, • Ability to meet deadlines and work under fast-paced, highly stressful, and time constraining circumstances, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair, • The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects, • The ability to read, write, and understand information, • The ability to listen to and understand information and ideas presented through spoken words and sentences Education and Experience: • More than one year of heavy equipment experience required; three or more years preferred, • Valid Commercial Driver's License (CDL) and acceptable driving record preferred, • Must own required tools to perform repairs, • High school diploma or equivalent preferred Supervisory Responsibilities:, • NoneTravel:, • Minimal travel expected but could be up to 15% with the possibility of overnight travelPhysical Requirements:, • To perform this job successfully, an individual must be able to perform each job duty and responsibility satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform job duties and responsibilities, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently moves materials or equipment weighing up to 50 lb, • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Be able to maneuver safely and work underneath equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work Work Environment:, • Regularly works indoors around moving mechanical parts and noise level may be loud at times; occasionally works outdoors in environmentally controlled conditions, • Exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high speed rotating equipment, • Requires wearing common protective or safety equipment, • Required to perform work in cramped spaces and/or high places Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #HOLTJH #LI-HCT LI-JH1 #HOLTCAT #CAT #CATERPILLAR #PAVINGEQUIPMENT #PAVERS #ASPHALTPAVERS #CONCRETEPAVERS HOLT CAT is the authorized Caterpillar® heavy equipment and engine dealer for 118 counties in South, Central, North and East Texas. Established in 1933, HOLT sells, services and rents Cat equipment, engines, generators and trucks for construction, mining, industrial, petroleum and agricultural applications. HOLT sells Caterpillar used equipment worldwide and fabricates its own line of custom engineered products including land management products and water tankers. Additionally, HOLT is a dealer for Link-Belt® Cranes, Trimble® Heavy and Highway construction products and AccuGrade® grade-control systems. The Holt name has been associated with heavy equipment and Caterpillar for over 100 years. HOLT CAT owners, Peter J. Holt and Corinna Holt Richter are direct descendants of Benjamin Holt, who in 1904 developed the first successful track-type tractor which he named the “Caterpillar.” HOLT CAT has come to be synonymous with quality, integrity and commitment to customer service. The HOLT CAT team is committed to providing rock solid stability with superior products and services from The Red River to the Rio Grande™.

Customs and Border Protection Officer (CBPO)\n With more than 69,000 employees, U.S. Customs and Border Protection (CBP) is one of the world’s largest law enforcement organizations and the largest federal law enforcement agency within the Department of Homeland Security. Discover a challenging and rewarding career with the sole organization responsible for securing the nation's borders from terrorism, human/drug smuggling, illegal migration, agricultural pests, and enforcing legitimate travel and trade. CBP employees demonstrate the highest level of commitment to exemplify the core values of Vigilance, Service to Country and Integrity. \n As a Customs and Border Protection Officer (CBPO) within CBP, you will be a valuable member of the Federal Law Enforcement Officer (LEO) profession. \n CBP is urgently hiring to fill full-time, entry and mid-level, career positions where your education OR prior general or experience in public safety, security, military police or law enforcement may qualify. \n Along with excellent base pay, exceptional federal employment benefits, and job stability, CBP is offering additional recruitment and retention incentives (see details below). \n Duties \n Typical assignments include: \n\n • Enforcing customs, immigration, and agriculture law and regulations;\n, • Enforcing the flow of legitimate trade and travel;\n, • Conducting inspections of individuals and conveyances;\n, • Determining the admissibility of individuals for entry into the United States; and\n, • Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband\n\n Salary and Benefits \n Selections from this announcement will be at the GS-5, GS-7, or GS-9 grade levels with promotion potential to the GS-11 and GS-12 grade levels. Annual base salary for newly appointed CBPOs varies per grade, from $41,863 - $127,464 per year. A fully trained CBP Officer is eligible for up to $45,000 in overtime pay in addition to the starting salary. CBPOs are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering. \n Recruitment Incentive Newly appointed Customs and Border Protection Officers who select a prioritized location at the time of their final offer will be offered up to a $15,000 incentive per year with a three-year service contract. Prioritized locations include: Arizona: Douglas, Lukeville, Nogales, San Luis; California: Calexico; Hawaii: Honolulu; Maine: Eastport; Montana: Raymond, Roosville; New Mexico: Columbus; New York: Alexandria Bay, Champlain, Massena, Trout River; North Dakota: Dunseith, Portal; Texas: Eagle Pass; Washington: Blaine Recruitment Incentive Newly appointed Customs and Border Protection Officers who select a prioritized location at the time of their final offer will be offered up to a $15,000 incentive per year with a four-year service contract. Prioritized locations include: California: Otay Mesa, San Francisco, San Ysidro, Tecate; Florida: Key West; Maine: Calais, Houlton, Jackman, Madawaska, Van Buren, Vanceboro; Minnesota: Grand Portage, International Falls; Montana: Sweetgrass; North Dakota: Pembina; Texas: Presidio; Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford; Washington: Oroville \n Duty Locations \n\n • Arizona: Douglas, Lukeville, Nogales, San Luis\n, • California: Andrade, Calexico, Otay Mesa, San Francisco, San Ysidro, Tecate\n, • Hawaii: Honolulu\n, • Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro\n, • Minnesota: Grand Portage, International Falls\n, • Montana: Raymond, Roosville, Sweetgrass, Wild Horse\n, • New Mexico: Columbus\n, • New York: Alexandria Bay, Champlain, Massena\n, • North Dakota: Dunseith, Maida, Pembina, Portal\n, • Texas: Eagle Pass, Presidio\n, • Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford\n, • Washington: Blaine, Oroville\n\n NOTE: The above preference locations are expected to have vacancies available in the future, however, if the duty locations do not have vacancies at the time of your final offer, you may be offered a different duty location within the United States. Locations offered at the time of your final offer are based on operational and mission requirements as determined by the CBP Office of Field Operations. \n Qualifications \n GS-5: You qualify for the GS-5 grade level if you possess one of the following: \n Experience: A minimum of 3 years of general experience, 1 year of which was equivalent to at least GS-4, performing duties that required the ability to meet and deal with people and the ability to learn and be able to apply a body of facts; OR \n Education Substitution: A conferred bachelor's degree or successful completion of a full 4-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR \n Combination of Experience and Education: A combination of general experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. \n GS-7: You qualify for the GS-7 grade level if you possess one of the following: \n Experience: A minimum of 1 year of specialized experience equivalent to at least the next lower grade level, that includes: \n\n • Performing physical inspections of persons, documents or goods for criminal activity, fraud, and/or illegal operations.\n, • Utilizing observational techniques, evaluating facts, and reviewing documentation while applying Federal, State, or local laws and regulations.\n, • Making determinations in compliance with laws and regulations that may lead to arrests, seizure of property, fines, and/or penalties based on findings.\n\n The above experience will be applied in connection with the CBPO Individual Occupational Requirement: Performing inspections work at borders, seaports, airports or other ports of entry and/or work involving preliminary screening of persons for entry and immigration status; or compliance/regulatory work. \n Education Substitution: A conferred bachelor's degree with superior academic achievement (SAA), which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Submitted transcripts must show the applicant does not have more than 10% pass/fail courses in order to qualify for SAA with GPA. OR One full year of graduate level education from an accredited college or university; OR \n Combination of Experience and Education: A combination of specialized experience equivalent to at least the next lower grade level AND successfully completed graduate level education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. \n GS-9: You could qualify for the GS-9 grade level in one of the following ways: experience, education, or a combination of both. \n Experience: A minimum of 1 year of specialized experience equivalent to at least the next lower grade level that includes: \n\n • Detaining suspected violators of Federal, State, or local laws and/or arresting violators using proper law enforcement methods.\n, • Enforcing the laws and regulations relating to importing, exporting, and/or international shipping to and from the United States.\n, • Utilizing intelligence techniques and behavior analysis to identify potential threats and perform risk assessments for violations of laws and threats to national security.\n, • Conducting interviews in a law enforcement capacity for the purposes of gaining information from suspected violators of laws to determine the appropriate course of action.\n\n Education Substitution: A conferred master's (or higher) degree, or two or more years of progressively higher-level graduate education leading to such a degree, or an LL.B. or J.D. from an accredited college or university; OR \n Combination of Experience and Education: A combination of specialized experience AND successfully completed graduate level education beyond the first 18 semester hours. This will be calculated using your resume and official or unofficial transcripts submitted with your application. \n Knowledge, Skills, Abilities and Characteristics (KSAOs): Candidates who meet the minimum qualification requirements for the GS-9 grade level are required to possess certain KSAOs to successfully perform the functions of this position. The KSAOs are: \n\n • Knowledge of CBP laws, regulations, and precedents, as well as CBP Officer processes, techniques, activities and law enforcement procedures to enforce and administer laws related to the arrival and departure of persons, conveyances and merchandise\n, • Knowledge of proper law enforcement methods including, interrogating, searching, seizing, arresting, and self-defense for use in apprehension of terrorists, aliens or others suspected of illegal activity\n, • Ability to make rapid, accurate judgments and decisions with respect to the applications of the regulations, instructions, and procedures for importing, exporting or enforcing the administration of laws relating to the rights of persons to enter, reside in or depart from the United States\n, • Ability to control imports and exports to detect and prevent smuggling and fraud\n, • Ability to perform primary inspection by questioning and observing individuals\n\n Other Requirements \n Citizenship: You must be a U.S. Citizen to apply for this position. \n Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years. \n Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). \n Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. \n Formal Training: After you are hired, you will be detailed to the Federal Law Enforcement Training Center in Glynco, GA, for 103-days of intensive instruction in basic law enforcement skills, immigration laws, etc. Successful completion of the academy is required for this position. Candidates assigned to certain duty locations may be required to pass a Spanish training program. \n How to Apply: \n Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Customs and Border Protection Officer, then complete the pre-screening questions. \n You'll then receive a link(s) to the BPA Job Opportunity Announcement (JOA) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details within the JOA and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume and supporting documents. Applicants selected at the GS-5 or GS-7 grade levels must also complete and pass the CBP Officer Entrance Exam. Exam. \n Note: This is a Direct Hire Authority announcement. All applicants who meet the minimum qualification requirements will be reviewed. Veterans' Preference and traditional rating and ranking of applicants do not apply to this vacancy. Veterans and Military Spouses will be considered along with all other candidates. \n As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

• REVENUE THAT REWARDS YOUR BUSINESS - Earn up to $3,000+ per week*, • GET PAID TO GET STARTED - $4,000 sign-on bonus, • HOME WHERE IT COUNTS - Home weekends on preferred lanes Buddy Moore puts drivers first-with strong weekly pay, weekly home time, and dry van freight that keeps you earning instead of waiting. We operate with a driver-focused culture built on stability, respect, and real career longevity. Our freight network runs through the Southeast and Mideast, giving drivers miles they can count on and a routine that supports life beyond the road. We're hiring in your local area! If you're looking for a carrier that values your time, pays you well, and keeps your truck running right, Buddy Moore has the opportunities that fit. • Revenue that scales with your setup. Earn up to $3,000+ per week, with revenue share of 68% of line haul for tractor only, 69% for multiple tractors, 75% for tractor and trailer, and 76% for multiple tractors and trailers., • Fuel surcharge, fully yours. Keep 100% of fuel surcharge paid directly to you., • Bonuses that add up. Earn a $4,000 sign-on bonus, plus a $5,000 referral bonus for referring other Owner Operators or Lease Purchase drivers., • Home weekends, familiar lanes. Run preferred traffic lanes across the Southeast, Midwest, Northeast, and Texas, with home time built around your weekends., • A network built to keep you moving. Access a large and growing customer base with driver-friendly dispatchers who work to keep you in the lanes and freight that fit your business., • Get paid fast and simply. Weekly settlements, direct deposit, and weekly advances available via EFS., • Support that lowers your overhead. Plate assistance program and maintenance accounts help keep your operating costs down., • We handle the paperwork. Fuel taxes are handled for you, so you can stay focused on the road., • Start strong. All-expenses-paid orientation gets you up and running without added out-of-pocket cost., • More revenue, lower expenses. A structure designed to maximize your profit as an owner operator. *All pay & bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. • Valid Class A CDL, • 1+ years OTR experience in the last 3 years, • 6+ months Flatbed experience in the last 10 years

Invest in Your Success with Mac Tools Are you ready to be your own boss and build a thriving business? Mac Tools offers a unique opportunity to own and operate a successful franchise. With a strong credit profile and the right financial foundation, you can unlock the potential to achieve financial independence and a fulfilling lifestyle. As a Mac Tools franchisee, you will enjoy the freedom and flexibility of running your own business without the overwhelming burdens of startup. Mac Tools offers a family-oriented culture; supported by Stanley Black & Decker – the largest tool company in the world – giving you the best of both worlds. Key Benefits of Mac Tools Franchise Ownership • Exclusive Territory: Build a loyal customer base in your protected territory. Mac Tools currently has over 1,250 existing franchisees with opportunities available in all fifty states, including Puerto Rico and across Canada., • Proven Business Model: Benefit from an award-winning system that has earned accolades including Fastest Growing Franchise, Top 100 Franchise, Franchise 500, and more., • World-Class Training: Gain the skills and knowledge you need to succeed via classroom and field-based sales training at our headquarters., • Ongoing Support: Receive continuous guidance and assistance, including national marketing support with motorsports branding, sales flyers, videos, etc., • Strong Brand Recognition: Leverage the brand power of Mac Tools and Stanley Black & Decker – the largest and fastest growing tool company in the world., • Financial Flexibility: Explore various financing options to fit your needs. Financial Requirements To qualify for a Mac Tools franchise, a strong credit profile and an initial down payment are essential. Your financial strength is a key factor in our franchise approval process, and we have lower start-up costs than many other franchise opportunities with a variety of financing options. Our Veterans Program offers vets or their spouse credits of up to $25,000 towards inventory purchases. Ready to Take the Next Step? Are you a qualified entrepreneur ready to invest in and operate a Mac Tools franchise? Complete our quick mobile application to start your journey towards financial independence. Our team can get you scheduled for one of our free Discovery Days, providing the opportunity to meet current Franchisees and experience the business first-hand. Mac Tools®, a division of Stanley Black & Decker Inc. 5195 Blazer Parkway Dublin, Ohio 43017

Invest in Your Success with Mac Tools Are you ready to be your own boss and build a thriving business? Mac Tools offers a unique opportunity to own and operate a successful franchise. With a strong credit profile and the right financial foundation, you can unlock the potential to achieve financial independence and a fulfilling lifestyle. As a Mac Tools franchisee, you will enjoy the freedom and flexibility of running your own business without the overwhelming burdens of startup. Mac Tools offers a family-oriented culture; supported by Stanley Black & Decker – the largest tool company in the world – giving you the best of both worlds. Key Benefits of Mac Tools Franchise Ownership • Exclusive Territory: Build a loyal customer base in your protected territory. Mac Tools currently has over 1,250 existing franchisees with opportunities available in all fifty states, including Puerto Rico and across Canada., • Proven Business Model: Benefit from an award-winning system that has earned accolades including Fastest Growing Franchise, Top 100 Franchise, Franchise 500, and more., • World-Class Training: Gain the skills and knowledge you need to succeed via classroom and field-based sales training at our headquarters., • Ongoing Support: Receive continuous guidance and assistance, including national marketing support with motorsports branding, sales flyers, videos, etc., • Strong Brand Recognition: Leverage the brand power of Mac Tools and Stanley Black & Decker – the largest and fastest growing tool company in the world., • Financial Flexibility: Explore various financing options to fit your needs. Financial Requirements To qualify for a Mac Tools franchise, a strong credit profile and an initial down payment are essential. Your financial strength is a key factor in our franchise approval process, and we have lower start-up costs than many other franchise opportunities with a variety of financing options. Our Veterans Program offers vets or their spouse credits of up to $25,000 towards inventory purchases. Ready to Take the Next Step? Are you a qualified entrepreneur ready to invest in and operate a Mac Tools franchise? Complete our quick mobile application to start your journey towards financial independence. Our team can get you scheduled for one of our free Discovery Days, providing the opportunity to meet current Franchisees and experience the business first-hand. Mac Tools®, a division of Stanley Black & Decker Inc. 5195 Blazer Parkway Dublin, Ohio 43017

This position operates heavy day cab trucks and multi-axle trailers in the delivery of heavy machinery, industrial tractors and equipment, to include the operation of heavy machinery in the on-load and off-load process. The position is responsible for the safe transportation of heavy machinery, industrial tractors and equipment to and from various branch stores and customer job locations, while adhering to company safety regulations and state laws. This position has major responsibilities to ensure external and internal customer satisfaction. Mid-level position – Generally has more than five years of experience and/or demonstrated job relevant knowledge/skills. Has a broad knowledge of the field’s standard and technical concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals. Performs a variety of standard, complex, and technical tasks; is self-starting and requires minimal supervision. The incumbent in this position is expected to model the following practices daily: • Demonstrate alignment with the company's mission and core business values;, • Collaborate with key internal/external resources;, • Participate in ongoing self-development., • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Transports all equipment deliveries and pickups in a positive, caring manner while striving for promptness, accuracy, and efficiency, • Secures equipment onto truck and ensures that materials meet state and federal guidelines for safe transport and vehicle capabilities. Assists other departments whenever required in an efficient manner, • Completes DOT required drivers daily log accurately and without misrepresentation, • Completes driver’s daily inspection report, making recommendations for repair or maintenance, as well as being responsible for the clean appearance of company assigned vehicle, • On an accurate and timely basis, completes and submits all related documentation to maintain the established business systems / process and ensures that the company is achieving its business goals. (i.e., Rental agreements, equipment check out and check in reports, return receipts, pick up receipts, non-movement, permits, etc.), • Ensures that all physical resources (overall shop appearance, staging area, tools, parts, inventory, personal hygiene, etc.) are maintained in clean, working order to ensure a safe working environment and exceptional customer satisfaction, • Performs pre- and post- vehicle inspection; Inspect truck for defects and safe operating condition, before, during, and after delivery trips, • Requires regular and punctual employee attendance, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Performs other duties as assigned, • Sound knowledge of industrial engine, transportation, and safe driving procedures, • Knowledge and understanding of Motor Carrier Safety Regulations/DOT guidelines, • Demonstrates proficiency with current computer software, related hardware, and machine electronic systems, • Knowledge of machines and tools, including their designs, uses, repair, and maintenance, • Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction, • Quality control analysis skills - conducting tests and inspections of products, services, or processes to evaluate quality or performance, • Operation and control skills - controlling operations of equipment or systems, • Equipment selection skills - determining the kind of tools and equipment needed to do a job, • The ability to adjust the controls of a machine or a vehicle quickly and repeatedly to exact positions, • Ability to read maps and operate GPS systems, • Ability to maintain a clean driver’s record and diligent attention to safety, • Ability to operate hand tools, power tools, and equipment used in mechanical repair, • The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble small objects, • The ability to read and understand information and ideas presented in writing, • The ability to listen to and understand information and ideas presented through spoken words and sentences Education and Experience: • High school or equivalent diploma preferred, • Valid Texas Driver’s License with Class A CDL required to include the ability to maintain the Valid Texas Driver’s License, • Five years of verifiable heavy haul driving experience required, over eight years preferred, • Three years’ verifiable driving experience operating a 7 or 8 axle configuration truck required, five or more preferred Supervisory Responsibilities:, • NoneTravel:, • Travel up to 100%Physical Requirements:, • Must be able to remain in a stationary position 100% of the time, • Must be able to move objects and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently moves materials or equipment weighing up to 50 pounds, • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina, • Ascend/descend with gradual or continuous progress by oneself, using both hands and feet and climb up and down ladders, • Be able to safely maneuver and work underneath equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work Work Environment:, • Requires working in a closed vehicle or equipment, • Requires wearing common protective or safety equipment, • Requires working outdoors, exposed to all weather conditions including extreme conditions such as heavy rain, wind, or excessive temperatures, • Includes exposure to sounds and noise levels that are distracting or uncomfortable, • Exposure to small quantities of chemicals, steam, high-pressure water, and high-speed rotating equipment, • Significant time spent in confined spaces and/or high places Disclaimer:Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #HOLTCG HOLT CAT is the authorized Caterpillar® heavy equipment and engine dealer for 118 counties in South, Central, North and East Texas. Established in 1933, HOLT sells, services and rents Cat equipment, engines, generators and trucks for construction, mining, industrial, petroleum and agricultural applications. HOLT sells Caterpillar used equipment worldwide and fabricates its own line of custom engineered products including land management products and water tankers. Additionally, HOLT is a dealer for Link-Belt® Cranes, Trimble® Heavy and Highway construction products and AccuGrade® grade-control systems. The Holt name has been associated with heavy equipment and Caterpillar for over 100 years. HOLT CAT owners, Peter J. Holt and Corinna Holt Richter are direct descendants of Benjamin Holt, who in 1904 developed the first successful track-type tractor which he named the “Caterpillar.” HOLT CAT has come to be synonymous with quality, integrity and commitment to customer service. The HOLT CAT team is committed to providing rock solid stability with superior products and services from The Red River to the Rio Grande™.

Job DescriptionCompany Description RRD is a leading global provider of marketing, packaging, print, and supply chain solutions that elevate engagement across the complete customer journey. The company offers the industry’s most trusted portfolio of creative execution and world-wide business process consulting, with services designed to lower environmental impact. With 22,000 clients, including 93% of the Fortune 100, and 32,000 employees across 28 countries, RRD brings the expertise, execution, and scale designed to transform customer touchpoints into meaningful moments of impact. Job Description Responsibilities: • Set up, adjust and operate a variety of auxiliary binding machines, • Inspect equipment for safety issues, • May operate automatic adhesive binding machines (perfect binders) that contain numerous interrelated process stations that are fed collated sheets or signatures and perform such functions as vibrating, milling, roughening, gluing, covering and delivering or stacking completed books, magazines or catalogs, • Make needed adjustments to coordinate the multiple work stations on a single machine, • Direct crew though all aspects of production, • Monitor quality, output and productivityQualifications, • Thorough knowledge of the set up, adjustment, procedures, capabilities and limitations of equipment to perform the full range of standard and specialized binding, folding, collating, and cutting of printed materials to complete a finished product, • Comprehensive knowledge of machinability of different paper weights, sizes, kinds and colors so as to be able to identify paper conditions (i.e. excessive moisture or curling that frequently requires additional machine adjustment), • Ability to use the full range of standard and specialized tools and devices to adjust and maintain the functional accuracy and operating conditions of the bindery machines, • Skill in making difficult adjustments to powered machines using hand tools (i.e. wrenches, screwdrivers, punches, knives) as well as more specialized hand tools, usually furnished by the machine manufacturer, • Skill in operating complicated bindery equipment such as folders, cutters, collators, stitchers, drills, binding/gluing machines, • Ability to read and interpret written work which indicates the number and sequence of machine operations required to complete the work and maintain dimensional accuracy in accordance with instructions provided Additional Information All your information will be kept confidential according to EEO guidelines. The pay range for this role at the noted location is $25.75- $34.70 / hour. The actual rate of pay offered may vary based upon, but not limited to: education, skills, experience, proficiency, performance, shift, and location. In addition to base salary, depending on the role, the total compensation package may also include overtime, shift differential, call-in, and stand-by pay. RRD offers benefits including medical, dental, and vision coverage, paid time off, disability insurance, 401(k) with match, life insurance and other voluntary supplemental insurance coverages, plus tuition assistance, maternity leave, adoption assistance, and employer/partner discounts. RRD is an Equal Opportunity Employer, including disability/veterans At RRD, we value innovation, authenticity, and integrity. To uphold the security and fairness of our hiring process, we ask that candidates refrain from using AI tools during interviews to ensure an authentic and secure experience. We appreciate your cooperation as we work to maintain a transparent and equitable hiring process. All employment offers are contingent upon the successful completion of both a pre-employment background and drug screen.

Job Description Join an owner-operator family with 75 years of experience moving time sensitive live entertainment. Great Work: Moving Broadway shows and other live entertainment Year-round work No touch policy Higher Compensation on Fewer Miles! Most teams earn $275,000 to $325,000+ on less than 110,000 miles Guaranteed Average Weekly Revenue (calculated quarterly) Teams: Guaranteed minimum weekly average of $5,000/week worked (most earn $5,500 - $6,500+) 2025 Bonus of $2,500/$5,000 per quarter for Teams ALL Miles PAID, PLUS Fuel Surcharge: $1.60/gallon or lower fuel price guarantee (average, after fuel surcharge) Compensation Highlights: Additional $1.00/mile bonus for Team line haul move $.65/mile bonus bobtail plus FSC/ $.80/mile bonus empty trailer plus FSC Tour Base Pay between $500 and $700 bonus or more per day plus FSC $250 bonus per day detention pay for solos Paid Cargo and Liability Insurances, Fuel Permits and Taxes Company supported owner-operator health insurance program Company provided Toll Transponder Start earning as soon as orientation with the Startup Weekly Guarantee! Qualifications: MUST be an Owner Operator Safe driving record Passport 2020 or newer tractor No more than 6 jobs in previous 3 years Pass DOT physical and Drug Test 2 years minimum verifiable OTR experience 23+ years of Age Family owned since 1949! CDL Class A · Home time: Flexible home time; tours may require time away from home Pay: $275,000 – $325,000/year

Job DescriptionC.R. England is Now Urgently Hiring Experienced Regional CDL-A Drivers! Pay Increase: Drivers Average $78,000 - $97,000 Annually* No-Touch Freight - Safe & On-Time Bonus • Valid CDL-A and 3+ months of current experience required, • This lane is not suitable for students, recent grads, or trainees This Dedicated Fleet Offers: • NEW pay increase: drivers average $78,000 annually - top 10% earn up to $97,000 per year, • Home time: 2-3 weeks out with 2-3 days off, • No-touch freight with some drop-and-hook + some live unloading & possible live reloading, • Mileage pay, • Dry-van trailers & condo trucks, • Safe & on-time bonus, • Top-of-the-line automatic transmission trucks Benefits Include*: • Full benefits package for you and your family, • 401(k) participation, • Paid time off & bonus incentives, • Unlimited cash referral program Earn Big at C.R. England with New & Improved Pay - Apply Now! Route Details: Our Dedicated Fleet is actively seeking experienced CDL-A regional drivers for a dry van operation hauling Anheuser-Busch products across the 48 lower states. This is an account with current operations within all regions of the United States. Job responsibilities on this account include ensuring the safe and timely transportation of all loads and remaining compliant with all safety regulations and company policies. Drivers on this fleet will operate condo trucks and dry van trailers delivering no-touch freight. Loads at some locations will be drop-and-hook, while others will involve live unloading or possibly live reloading. Home time for this fleet is 2-3 days every 2-3 weeks, to help maximize driver miles and earning potential. If you're an experienced CDL-A driver seeking a reliable and rewarding opportunity, we encourage you to apply and join our dedicated team! Requirements: • Valid CDL-A and 3+ months of current experience required., • This lane is not suitable for students, recent grads, or trainees., • Must be 21 years or older, • Must be able to pass a DOT drug screen Better Pay, Home Time, and Miles. C.R. England is Urgently Hiring - Apply Now! Pay Disclaimer:* The job information and data provided here are for informational purposes only, are based in whole or in part on estimates, and do not represent any type of promise or prediction of future performance or employment. PAST PERFORMANCE AND THE INFORMATION CONTAINED HERE ARE NO GUARANTEE OF FUTURE PAY RESULTS, REVENUE, MILES, OR HOME TIME. NO RIGHT TO EMPLOYMENT, CONTINUED EMPLOYMENT, SPECIFIC EMPLOYMENT, OR A MINIMUM AMOUNT OF MILES OR HOME TIME, OR SPECIFIC PAY AMOUNT IS GUARANTEED OR CREATED BY THIS DATA OR THE USE OF THIS SITE. ANY AMOUNTS IN ANY CATEGORIES ON THIS SITE WILL NOT REFLECT ACTUAL FUTURE RESULTS. Your actual pay, mileage, and home time will vary from these numbers depending on many factors, which may include tenure-based pay rates, your fleet, how hard you work, company performance, and how much you drive, among other factors. Because precise rate of pay can be difficult to guarantee in various pay structures common in the transportation industry, you are only guaranteed applicable minimum wage for hours worked in a given pay period. Click here for additional disclaimer information and additional detail about how this data is generated. Benefits:* Medical, Dental, Vision, HSA, FSA, Life and AD&D Insurance, PTO, 401(k), and additional voluntary benefits. For additional details, including eligibility, please see the Company’s Benefit Summary and Driver Employee Policy Manual.

Job Description All 48 lower states are on the map with this Anheuser-Busch East fleet, where you run dedicated freight in a condo truck pulling a dry van. You stay out 2-3 weeks at a time, then take 2-3 days off. The freight is no-touch. Some stops are drop-and-hook, while others involve live unloading or possibly live reloading. Your job is to get every load there safely and on time while staying compliant with safety regulations and company policies. This is a dedicated account, and many of C.R. England's dedicated customers have stayed with the company for over 20 years. The Lanes: • Dedicated Anheuser-Busch East account, • Operations in all regions of the United States, • Deliveries across the 48 lower states, • Mileage pay, • Safe and on-time bonus The Freight: • No-touch freight, • Drop-and-hook at some locations, • Live unloading or possible live reloading at others Your Schedule: • 2-3 weeks out, • 2-3 days off Equipment: • Condo trucks, • Dry van trailers, • Every truck has an automatic transmission Requirements: • Valid Class A CDL, • 21 years of age or older, • 3+ months of recent Class A CDL experience, • This lane is not suitable for students, recent grads, or trainees Benefits: • Medical, Dental, Vision, HSA, FSA, Life and AD+D Insurance, • PTO, • 401(k), • Additional voluntary benefits Consistency Matters Because we’re one of the biggest carriers in the business, we can build more consistency into our jobs, which matters a lot to experienced truck drivers. Logging miles is important, but so is home time, so we’ve got schedules that make sense and a whole support team dedicated to making sure you’re maximizing your time on the road without wasting time waiting around. For additional details, including eligibility, please see the Company's Benefit Summary and Driver Employee Policy Manual. Weekly and yearly pay estimates are based on 1+ years of experience. For Pay Disclaimer visit: https://www.crengland.com/pay-disclaimer/. For Privacy Policy visit: https://www.crengland.com/privacy-policy/ \nCompany Description Whether you need a CDL, a truck driver job, or both; we have you covered with best-in-class training and great pay is just the start to take your career to the next level. We have open lanes in our Dedicated, Regional, National, and Intermodal divisions allowing you to choose your lane. All of our jobs include highly competitive pay, health and retirement benefits, and the industry’s best equipment. We are seeking truck drivers that have a safe and clean record and can handle 12 Gears, 18 Wheels, 40 Tons, 80 Feet, and 400 Horsepower! Whether you need a CDL, a truck driver job, or both; we have you covered with best-in-class training and great pay is just the start to take your career to the next level. We have open lanes in our Dedicated, Regional, National, and Intermodal divisions allowing you to choose your lane. All of our jobs include highly competitive pay, health and retirement benefits, and the industry’s best equipment. We are seeking truck drivers that have a safe and clean record and can handle 12 Gears, 18 Wheels, 40 Tons, 80 Feet, and 400 Horsepower!

Job Description CDL-A OTR Driver | Up to $0.80/mi | Company Truck | 1099 Hiring in: AZ · CA · FL · GA · IL · IN · KS · KY · MN · MO · NJ · NM · NY · OH · OR · PA · TN · TX · UT · WA Drive our truck — no equipment needed. We cover fuel, tolls, repairs and occupational accident insurance. Not owner-operator or lease purchase. Paid 1099, not W-2. PAY $0.70/mile base — loaded AND empty. Up to +$0.10/mile performance pay. Each category is separate: • Daily PTI — +$0.03, • Safe driving — +$0.03, • On-time pickup/delivery — +$0.02, • Home-time & dispatch cooperation — +$0.02 At 4,000 miles/week: $2,800 base · $3,200 with full performance pay. Settlement: Sunday–Saturday · Statement Wednesday · Direct deposit Thursday. FREIGHT Dry van · Lightweight · Mostly drop-and-hook · No-touch · No endorsements. We work with major national retailers, shippers and brokers to keep trucks moving. HOME TIME 4 weeks OTR → up to 4 days home Or: 3 weeks OTR → up to 3 days home. This rotation does not earn the home-time bonus, so total pay tops out at $0.78/mile instead of $0.80. WHAT WE COVER • Fuel, • Tolls, • Repairs & maintenance, • Occupational accident insurance, • Fuel card, • Safety equipment, • Relocation assistance when applicable, • Passenger ride-along, • 24/7 dispatch BONUSES • DOT Inspection: Level 1 $400 · Level 2 $300 · Level 3 $200, • Referral: Company Driver $500 · Owner Operator $1,000 BEFORE YOU APPLY Four policies that do not change. Better you know now. 1. 1099 — Company equipment, fuel, tolls and repairs. Not owner-operator or lease purchase. You handle your taxes. No health insurance or 401(k)., 2. SAMSARA CAMERA — Dual-facing camera in every truck. Both cameras stay active while driving; inward-facing may be turned off when parked. Footage may also support disputed incidents or DataQs challenges when appropriate., 3. VIOLATIONS — $250 per DOT violation point. If caused by a properly reported equipment defect we had not repaired, the charge stays with us. First violation: charged. Second: charged + contract ends. We are strict about safety. REQUIREMENTS • Age min 23 years old and max 55 years old, • Valid CDL-A, • 2+ years verifiable CDL-A OTR experience, • Authorized to work in the U.S., • Able to communicate in English as required for commercial driving, • Meet company/insurance MVR & PSP requirements, • No unresolved DOT SAP program MVR, PSP & SAP We review MVR and PSP before approval. We will ask: “When we check your MVR and PSP, what will we find? Please tell us now.” Something on your record does not automatically disqualify you. Eligibility depends on the violation, age, severity and insurance requirements. What creates a problem is discovering something on the report that was not disclosed. Completed SAP? We need completion documentation. “Almost finished” is not finished. FAIR CHANCE A criminal record does not automatically disqualify you. Driving history, MVR, PSP and insurance eligibility are reviewed separately. HIRING PROCESS • Phone screening, • Send CDL photo, • MVR, PSP & experience review, • Insurance approval, • Orientation scheduled Insurance approval is required before hiring. SKYROAD INC · USDOT 3999280 · MC 1502613 600 Superior Avenue East, Suite 1300 - #3410, Cleveland, OH 44114 Don’t take our word for it — check us yourself on FMCSA SAFER: USDOT 3999280 • Driver OOS: 5.1% (national average 6.67%), • Vehicle OOS: 15.7% (national average 22.26%), • Fatal crashes: 0 These figures come directly from FMCSA’s public SAFER database. \nCompany Description Steady OTR freight, $0.70 CPM base pay plus up to $0.10 CPM in performance bonuses, 4,000+ weekly miles, dedicated dispatch, and reliable home-time scheduling. We work directly with major customers and brokers including: Amazon · USPS · Walmart · FedEx · UPS · DHL · J.B. Hunt · Schneider · RXO · KNX We also use Numeo AI to compare freight across multiple load boards and help find lower fuel prices. Around 70% of our freight is lightweight and drop-and-hook. Steady OTR freight, $0.70 CPM base pay plus up to $0.10 CPM in performance bonuses, 4,000+ weekly miles, dedicated dispatch, and reliable home-time scheduling.\n\nWe work directly with major customers and brokers including:\nAmazon · USPS · Walmart · FedEx · UPS · DHL · J.B. Hunt · Schneider · RXO · KNX\nWe also use Numeo AI to compare freight across multiple load boards and help find lower fuel prices. Around 70% of our freight is lightweight and drop-and-hook.

Job Description Join an owner-operator family with 75 years of experience moving time sensitive live entertainment. Great Work: Moving Broadway shows and other live entertainment Year-round work No touch policy Higher Compensation on Fewer Miles! Most singles earn $200,000 to $250,000+ on less than 85,000 miles Guaranteed Average Weekly Revenue (calculated quarterly) Solos: Guaranteed minimum weekly average: $3,500/week worked (most earn $4,000 - $5,000+) 2025 Bonus of $2,500/$5,000 per quarter for Singles/Teams ALL Miles PAID, PLUS Fuel Surcharge: $1.60/gallon or lower fuel price guarantee (average, after fuel surcharge) Compensation Highlights: • $.65/mile bonus bobtail plus FSC/ $.80/mile bonus empty trailer plus FSC, • Tour Base Pay between $500 and $700 bonus or more per day plus FSC, • $250 bonus per day detention pay for solos, • Paid Cargo and Liability Insurances, Fuel Permits and Taxes, • Company supported owner-operator health insurance program, • Company provided Toll Transponder, • Start earning as soon as orientation with the Startup Weekly Guarantee! Qualifications: MUST be an Owner Operator Safe driving record Passport 2020 or newer tractor No more than 6 jobs in previous 3 years Pass DOT physical and Drug Test 2 years minimum verifiable OTR experience 23+ years of Age Family owned since 1949! CDL Class A Pay: $200,000 – $250,000/year

\n TravSource is seeking a travel Pediatric Respiratory Therapist for a travel job in Dallas, Texas. Job Description & Requirements\n \n • Specialty: Pediatric Respiratory Therapist\n, • Discipline: Allied Health Professional\n, • Start Date: ASAP\n, • Duration: 13 weeks\n, • 33 hours per week\n, • Shift: 12 hours, nights\n, • Employment Type: Travel\n \n \n Locals accepted at lower rate \n \n PEDI RRT, BLS AND PALS MUST HAVE PEDI CRITICAL CARE EXPERIENCE: ED (TRAUMA CENTER), NICU LEVEL 3 OR 4, PICU/TICU, CICU \n SHIFT/HOURS: 12 HOUR NIGHTS 1845-0715 \n WEEKENDS: YES \n DRESS CODE: GRAY SCRUBS \n About TravSource\n \n At TravSource, we understand that travel healthcare professionals deserve a staffing partner who values their expertise and commitment. We are a specialized travel staffing firm focusing on the critical needs of Nursing and Allied Health professionals. \n Why Travel with Us? \n \n • 💰 Top-Tier Compensation: We are committed to offering industry-leading pay packages to ensure your hard work is rewarded with the financial freedom you deserve. We believe in transparency and maximizing your earning potential on every assignment.\n, • 🤝 Dedicated, Accessible Recruiters: You're never alone on assignment. Our highly experienced recruiters are always available (24/7, or specify hours) to personally go over assignment details, answer questions, and provide ongoing support, making your transition seamless and stress-free.\n, • 🎯 Diverse Opportunities: Whether you're a seasoned RN, a specialized therapist, or a skilled tech, we provide access to a wide range of rewarding assignments across the country in both the Nursing and Allied Health sectors.\n \n Choose TravSource for a travel career where you are valued, well-paid, and fully supported every step of the way. \n \n Benefits\n \n • Weekly pay\n, • Vision benefits\n, • Mileage reimbursement\n, • 401k retirement plan\n, • Medical benefits\n, • Dental benefits\n, • Referral bonus\n \n

Job Description TransAm Trucking Independent Contractor Truck Driver Jobs TransAm Trucking, a leading refrigerated carrier, has exciting opportunities for CDL-A drivers to become independent contractors! Be your own boss and enjoy the open road with competitive compensation and top-tier support. Why Partner with TransAm? As an independent contractor with TransAm Trucking, you'll enjoy: • 70% of Linehaul Revenue: Maximize your business' earning potential with a percentage-based pay structure.*, • 2,000 Sign-On Bonus: Four installments of $500 after completing 30, 60, 90, & 120 days of your contract., • SAP Friendly, • Average Gross Revenue Per week: $4,000 - $6,000, • Fuel Surcharges Paid: Receive 100% of any fuel surcharges paid to TransAm for shipments hauled., • Fuel Discounts: At your option, save at the pump with access to our extensive fuel network., • No Forced Dispatch: You make the decision that's best for your business., • Paid Base Plates & Permits: Reduce your overhead with essential costs covered., • Flexible Equipment Solutions: Bring qualified equipment of your choice. If you don't have your own equipment, TransAm partners with ONE Leasing—which offers a diverse range of lease options, including a new 3-month lease option for drivers seeking a lower-commitment path to getting their business started or looking to scale their business at a comfortable pace.**, • Optional Benefits Access: Independent Contractors may have access to optional benefit offerings (such as dental, vision, accident, disability, and more) through a third-party partner. These benefits are not provided by TransAm Trucking and participation is completely optional. Business/Driver Requirements • Valid CDL-A for any drivers running your equipment., • All drivers must have at-least 3 months of verified tractor-trailer driving experience., • All drivers must be a minimum 21 years old., • Own or lease one or more trucks (equipment leasing options available through ONE Leasing or other leasing company of your choice).** *TransAm Trucking will pay the Contractor 70% of the line haul revenue, less authorized deductions and pass-through charges from carrier's broker. **ONE Leasing, a separate and distinct company from TransAm Trucking, offers equipment for lease to its clients. Contact ONE Leasing directly for more details and to see if this is right for your business. Leasing equipment through ONE Leasing is strictly optional for independent contractors. All amounts stated herein represent gross compensation, and may be subject to authorized deductions. Nothing contained herein is any warranty or guarantee of the amount that an independent contractor will actually earn or the miles an independent contractor will drive. There are many factors that can significantly affect the amount an independent contractor will actually earn and the success of an independent contractor's business. TransAm Trucking is an Equal Opportunity Employer and expects the same of its independent contractors with respect to their own employees.

Job Description 88% Linehaul + 100% Fuel Surcharge | Home Every Weekend Hiring areas: Texas, North Carolina, Alabama, Georgia, and Wisconsin New Waverly Transportation (NWT), a Louisiana-Pacific-owned carrier, is growing its flatbed owner-operator fleet. If you are an experienced owner-operator looking for dependable freight, strong earning potential, and a company that treats drivers with respect, we would like to talk with you. Why drive with NWT? • Earn 88% of linehaul, • Receive 100% of the fuel surcharge, • Typical annual gross: $200,000-$250,000+, depending on miles, freight, and performance, • Home every weekend, with many drivers getting through the house during the week, • Regional and OTR options, • Year-round freight with no forced dispatch, • Primarily flatbed freight hauling building materials, • Weekly pay by direct deposit, • Great fuel discounts, • $1,000 sign-on bonus, paid after your first week, • Clean-inspection and annual safety bonuses, • Trailer lease program available, subject to availability, • Group medical benefits available, • Health, dental, vision, and disability insurance, • Fuel card and fuel-discount programs, • Passenger ride-along program, • Pet rider program, • Driver referral program Why owner-operators stay with NWT • A strong, stable primary freight base through our Louisiana-Pacific relationship, • Additional outside customers to help keep you moving, • Small-fleet, family-oriented culture with open communication, • Safety-first support without pressure, • More than 50% of our fleet has been with NWT for five or more years, including several drivers with 15+ years, • You are treated like a name, not a truck number Requirements • CDL A in good standing, • Minimum 2 years of over-the-road driving experience, • At least 6 months of flatbed experience, • Regional and OTR driving experience, • Safe driving record, • Commercial truck-driving and semi-truck operation experience, • Strong communication with dispatch and company staff, • Current DOT physical and medical card, • Your own truck required. NWT does not provide company trucks or truck lease programs. Ready for steady freight and a company that respects you? Apply today and let us start the conversation. \nCompany Description New Waverly Transportation is an owner operator trucking company owned by Louisiana Pacific Corporation, a leading building solutions company. With manufacturing mills throughout the United States, NWT’s direct access to LP’s freight distribution has provided NWT with continues year-round freight opportunities. In addition, New Waverly’s outside customer base has grown over the years to include various other leading manufactures and shippers throughout the Southeast, Midwest, Lower Atlantic and Central Atlantic regions. Our operational principles of Safety, Service and Integrity have provided our owner operators with the ability to maintain a safe and profitable operation with steady and consistent freight offerings. New Waverly Transportation is an owner operator trucking company owned by Louisiana Pacific Corporation, a leading building solutions company. With manufacturing mills throughout the United States, NWT’s direct access to LP’s freight distribution has provided NWT with continues year-round freight opportunities. In addition, New Waverly’s outside customer base has grown over the years to include various other leading manufactures and shippers throughout the Southeast, Midwest, Lower Atlantic and Central Atlantic regions. Our operational principles of Safety, Service and Integrity have provided our owner operators with the ability to maintain a safe and profitable operation with steady and consistent freight offerings.

At EquipmentShare, we’re not just filling a role — we’re assembling the best team on the planet to build something that’s never been built before. We’re on a mission to transform an industry that’s been stuck in the past by empowering contractors and communities through innovative technology, real-time support, and a team that truly cares. We’re hiring a Heavy Equipment Shop Technician (Mechanic) at our retail facility in Irving, TX, and we’re looking for someone who’s ready to grow with us, bring energy and drive to their work, provide maintenance and repair for a variety of customer and company owned heavy equipment machinery and aerial lifts and help us build the future of construction. Mechanics will have the opportunity to work on the newest fleet in the industry. Schedule: Monday to Friday, 7:00 AM to 5:00 PM, and offers overtime pay after working 40 hours. (This role is subject to on-call scheduling with additional compensation provided) As a Shop Technician, you’ll use our tech to create, assign, and monitor work orders, track machine service intervals, order parts, and diagnose issues faster by pulling data from hundreds of makes and models. With real-time information at your fingertips, you can determine the root cause and corrective action for each issue quickly, enabling you to work smarter, not harder. Practice safe job practices for repairing equipment Use technology (laptops and tablets) comfortably Maintenance and repair of complex mechanical, electrical, hydraulic, and diesel systems on a variety of rental and customer equipment and tools while using a high degree of independent judgment Assist in the training of lower level technicians as needed Maintain paperwork/electronic documentation of work performed (work orders) in a complete and timely manner on a daily basis Assist with pick-up and delivery of equipment & parts Be knowledgeable of OSHA requirements (preferred) Year-round company provided OEM training Other duties, assigned as needed Because we do things differently — and we think you’ll feel it from day one. We’re a people-first company powered by cutting-edge technology. That means our proprietary T3 platform doesn’t just run our business — it also makes your job easier, safer, and more connected. Whether you’re behind the wheel, under the hood, leading a branch, or closing deals — tech supports you, and you drive us forward. We’re a team of problem-solvers, go-getters, and builders. And we’re looking for teammates who take pride in doing meaningful work and want to be part of building something special. Perks & Benefits • Monthly Family Dinner Night — We treat you and your family to dinner every month, because family comes first. (An employee favorite!) *restrictions apply, • Competitive compensation, • Full medical, dental, and vision coverage for full-time employees, • Generous PTO + paid holidays, • 401(k) + company match, • Tool and boot reimbursements (role dependent), • Gym membership stipend + wellness programs (earn PTO and prizes!), • Company events, food truck nights, and monthly team dinners, • 16 hours of paid volunteer time per year — give back to the community you call home, • Career advancement, leadership training, and professional development opportunities Access to industry leading diagnostic tools You want to be part of a team that’s not just changing an industry for the sake of change — we’re transforming it to make it safer, more secure, and more productive. You bring grit, heart, and humility to your work, and you’re excited about the opportunity to grow within a fast-paced, mission-driven environment. We’re looking for people who: • See challenges as opportunities, • Embrace change and continuous improvement, • Bring energy, effort, and optimism every day Must own tools applicable to position Advanced mechanical aptitude and working knowledge of tools Extensive knowledge of construction equipment with an advanced understanding of schematics and diagrams Superior customer service, teamwork and verbal/written communication skills High School diploma, Trade school certificate preferred Experience in field service, maintenance and repair preferred Must be able to move, stand, stoop and bend freely Must be able to lift up to 50 pounds at times This is a safety sensitive position and any offer of employment will be contingent on passing a 10 panel drug screen At EquipmentShare, we believe the best solutions come from a team that reflects the world around us. Our initiative — A Workplace For All — is rooted in the belief that we must work together to solve some of the toughest problems in construction. That means attracting, developing, and retaining great people from all walks of life. We value different backgrounds, talents, and perspectives. We want you to feel like you belong here — because you do. EquipmentShare is an EOE M/F/D/V. Employment is contingent on passing a background check. Additionally, some roles require passing a drug test, depending on the job responsibilities.

Job DescriptionDescription: Job Summary The Assembler is responsible for manually feeding laundry into machinery, such as folding and ironing machines. The Assembler staff works as a team, and each member may operate different machines within a shift, as well as handle both wet and dry laundry as needed. Essential Job Functions, Duties, and Responsibilities This position will work within a team of people performing similar duties. Along with one or more team members, an Assembler may perform some or all of the following duties during a given shift: • Push/pull a cart of clean linen to workstation, • Identify the customer by the customer tag, • Separate mixed clean linens, • Feed linens into machinery for folding or ironing, • Fold linens and mops by hand, • Place linens on an automated conveyor, • Place linen onto a metal hanger (cubicle curtains), • When necessary, stack linen as it comes out of folding or ironing machines, • Visually and manually inspect linen to maintain quality, • Maintain a clean workstation, • Demonstrates friendly and respectful behavior in the work environment, • Assist in any job necessary as instructed by Management, • Additional duties as assigned, • Perform job rotation as required Additional Responsibilities: On occasion, an Assembler may be requested to handle linen that requires special attention, including: • Counting folded linens and stacking them by count, • Assisting in conducting inventories for accounts Minimum Qualifications • Ability to read comprehend and write in English and/or Spanish, • Quality orientation and high attention to detail, • Ability to manage multiple tasks and priorities and easily adapt to changing situations, • Strong teamwork skills - ready and willing to work closely with team members, • Open, and able, to work, day or night shifts, and willing to rotate shifts depending on production needs, • Open to long hours and working weekends (Saturday/Sunday) when needed, • Pass a background check and drug screen, in accordance with applicable laws. Preferred Qualifications • Prior experience working in a plant environment Requirements: Physical / Mental Requirements • Physical demands include constant standing and frequent walking throughout entire work shift, and ability to maintain body equilibrium to prevent falling when walking, standing, or crouching on work surface, • Constant reaching above and below shoulder height, twisting, applying pressure, grasping, and pulling (including using fingers, thumbs, and palm) items, and loading machinery in a repetitive motion., • Lifting and raising objects from a lower to a higher position or moving objects horizontally from position to position. This occurs constantly throughout the shift requiring substantial use of the upper arms, shoulders, and back muscles., • Constant pushing/pulling of both empty and full, wheeled laundry carts of varying weights and sizes, up to and potentially exceeding 250 pounds., • Constant throughout entire 8-hour shift, fingering, fine manipulation, picking and grasping primarily with fingers rather than with the whole hand or arm., • Repetitive hand movement includes simple and power grasping and pushing and pulling items., • Heavy work, including exerting force and lifting up to 50 pounds on a frequent basis and up to 20 pounds force constantly to move objects., • Pulling, using upper arms and shoulders to exert force in order to draw, drag, haul or tug objects in a sustained motion., • Ability to maintain productivity requirements in a fast-paced facility where all operations are driven by fully functioning, full life cycle computer system. System uses time sensitive production that follows a system of conveyor surfaces to move products and materials through the entire cleaning process to assure highest quality cleaning functionality., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus., • Ability to understand, remember and apply oral and/or written instructions or other information., • Ability to remember and communicate routine, factual information., • Ability to organize thoughts and ideas into understandable terminology, • Ability to apply common sense and make decisions which have a moderate impact on the immediate work unit, • Ability to understand and follow basic instructions and guidelines., • Ability to express or exchange ideas by means of the spoken word, communicating orally with others accurately, loudly, and quickly, • Ability to count accurately, • Required to wear and use personal protective equipment as needed., • Ability to hear for safety and awareness of surroundings., • Must be able to meet the physical demands for the entire shift. Work Environment Production areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature (non-air-conditioned work area), noise, humidity, and other hazards. Worker is subject to sustained hot working environment (i.e., inside environmental conditions without cooling air conditioning and variable internal temperatures that can be within range of 90 degrees Fahrenheit and higher). Worker is exposed to noise sufficient enough to require worker to shout to be heard above ambient noise level. Scheduled Weekly Hours: 40 EEO Statement Employees of Division Laundry Houston, LLC are protected by federal laws, Presidential Executive Orders, and other laws designed to protect employees from discrimination on the basis of race, religion, color, sex (including pregnancy and gender identity), sexual orientation, parental status, national origin, age, disability, family medical history or genetic information, political affiliation, military service, or any other non-merit based factor. These protections extend to all management practices and decisions, including recruitment and hiring practices, appraisal systems, promotions, and training and career development programs. Employees of Division Laundry Houston, LLC are also protected against retaliation. Consistent with federal laws, acts of retaliation against an employee who engages in a protected activity such as, whistle blowing, or the exercise of any appeal or grievance right provided by law will not be tolerated. Managers and supervisors of Division Laundry Houston, LLC are also reminded of their responsibility to prevent, document, and promptly correct harassing conduct in the workplace.

Job Description Details: • $0.71 CPM All Miles + $.01 Safety bonus, • Home every other weekend!, • $85,000 to $95,000 per year!!!, • 2600-3200 miles per week, • Want to make more money? – Stay out longer! – We have the miles!, • Nothing further west than Denver, East to Indy, Southeast to Atlanta, South to Dallas. NO COASTS! Driver Benefits: • Per diem pay Optional, • Seniority Pay Increases beginning 1st year, • NEW – Lower Cost Health, dental, vision and life insurance, • 401(k) retirement plan, • $2,000 referral bonus, • No-touch freight, • Our Fleet: 2022 & 2023 Volvo's | 2022, 2023, 2024 International, • Pet and passenger policy WHY DRIVE FOR HILL BROS? LET OUR DRIVERS TELL YOU. Hiring Qualifications • Minimum 21 years of age with valid CDL-A, • No serious violations in last 2 years; no more than 3 moving violations in last 3 years, • Experience:, • 12 months verifiable Tractor/Trailer experience in the last 3 years OR, • 4 months’ Tractor/Trailer experience + truck driving school in the past 18 months

Job Description Details: • $0.71 CPM All Miles + $.01 Safety bonus, • Home every other weekend!, • $85,000 to $95,000 per year!!!, • 2600-3200 miles per week, • Want to make more money? – Stay out longer! – We have the miles!, • Nothing further west than Denver, East to Indy, Southeast to Atlanta, South to Dallas. NO COASTS! Driver Benefits: • Per diem pay Optional, • Seniority Pay Increases beginning 1st year, • NEW – Lower Cost Health, dental, vision and life insurance, • 401(k) retirement plan, • $2,000 referral bonus, • No-touch freight, • Our Fleet: 2022 & 2023 Volvo's | 2022, 2023, 2024 International, • Pet and passenger policy WHY DRIVE FOR HILL BROS? LET OUR DRIVERS TELL YOU. Hiring Qualifications • Minimum 21 years of age with valid CDL-A, • No serious violations in last 2 years; no more than 3 moving violations in last 3 years, • Experience:, • 12 months verifiable Tractor/Trailer experience in the last 3 years OR, • 4 months’ Tractor/Trailer experience + truck driving school in the past 18 months

Job Description Details: • $0.71 CPM All Miles + $.01 Safety bonus, • Home every other weekend!, • $85,000 to $95,000 per year!!!, • 2600-3200 miles per week, • Want to make more money? – Stay out longer! – We have the miles!, • Nothing further west than Denver, East to Indy, Southeast to Atlanta, South to Dallas. NO COASTS! Driver Benefits: • Per diem pay Optional, • Seniority Pay Increases beginning 1st year, • NEW – Lower Cost Health, dental, vision and life insurance, • 401(k) retirement plan, • $2,000 referral bonus, • No-touch freight, • Our Fleet: 2022 & 2023 Volvo's | 2022, 2023, 2024 International, • Pet and passenger policy WHY DRIVE FOR HILL BROS? LET OUR DRIVERS TELL YOU. Hiring Qualifications • Minimum 21 years of age with valid CDL-A, • No serious violations in last 2 years; no more than 3 moving violations in last 3 years, • Experience:, • 12 months verifiable Tractor/Trailer experience in the last 3 years OR, • 4 months’ Tractor/Trailer experience + truck driving school in the past 18 months

Job DescriptionCompany Description RRD is a leading global provider of marketing, packaging, print, and supply chain solutions that elevate engagement across the complete customer journey. The company offers the industry’s most trusted portfolio of creative execution and world-wide business process consulting, with services designed to lower environmental impact. With 22,000 clients, including 93% of the Fortune 100, and 32,000 employees across 28 countries, RRD brings the expertise, execution, and scale designed to transform customer touchpoints into meaningful moments of impact. Job Description First Shift: 6:30AM -5:00PM • Drive forklift truck equipped with lifting devices such as forklift, fork-grapple, clamps, elevating platform, or trailer hitch, to push, pull, lift, stack, tier, or move raw paper materials and in process products and finished products, equipment, or materials in warehouse, storage yard, or factory, • May load and unload semi trailer trucks. Maintain accurate inventory and report any discrepancies, • May load or unload materials onto or off of pallets, skids, or lifting device. Perform safety checks on lifts, • May lubricate truck, recharge batteries, fill fuel tank, or replace liquefied-gas tankQualifications, • Must be skilled in handling controls for starting, stopping, backings, and driving fork lift or clamp truck through aisles in building, up and down ramps, and in and out of railroad cars, trucks, etc.; and, for lifting, lowering, and tilting forks by moving hands, arms, feet, and legs to operate controls, • Must know how high, wide, and long the fork lift truck and its load are, and how much the fork lift truck can lift, • Good special ability to identify how high and wide a doorway and an aisle must be to drive the fork lift truck and its load; how high and wide the shelf, bin, etc., must be to place the load; and how high the load must be lifted to reach the shelf or bin, • Must be able to recognize whether the fork lift truck is able to lift the load and whether the load is properly balanced, • Knowledge of the layout of the storage area to be able to find and place items without need for detailed instructions Additional Information All your information will be kept confidential according to EEO guidelines. The pay range for this role at the noted location is $16.50-18.00 / hour. The actual rate of pay offered may vary based upon, but not limited to: education, skills, experience, proficiency, performance, shift, and location. In addition to base salary, depending on the role, the total compensation package may also include overtime, and shift differential. RRD offers benefits including medical, dental, and vision coverage, paid time off, disability insurance, 401(k) with match, life insurance and other voluntary supplemental insurance coverages, plus tuition assistance, maternity leave, adoption assistance, and employer/partner discounts. RRD is an Equal Opportunity Employer, including disability/veterans At RRD, we value innovation, authenticity, and integrity. To uphold the security and fairness of our hiring process, we ask that candidates refrain from using AI tools during interviews to ensure an authentic and secure experience. We appreciate your cooperation as we work to maintain a transparent and equitable hiring process. All employment offers are contingent upon the successful completion of both a pre-employment background and drug screen.

Job Description About the Role: Vanderlande Logistics is seeking a Floor Assembly Technician to support the Irving, TX location. The Floor Assembly Technician - Mechanic plays a critical role in the manufacturing and assembly process by ensuring that floor components and related mechanical systems are accurately and efficiently assembled to meet quality and safety standards. This position requires hands-on expertise in interpreting technical drawings, operating assembly tools, and performing mechanical adjustments to achieve precise fit and function. The technician will collaborate closely with engineering and quality assurance teams to troubleshoot and resolve assembly issues, contributing to continuous process improvements. Attention to detail and adherence to safety protocols are paramount to maintain a productive and hazard-free work environment. Ultimately, this role supports the delivery of high-quality products that meet customer specifications and company standards. Minimum Qualifications: • High school diploma or equivalent., • Proven experience in mechanical assembly or a related technical field., • Ability to read and interpret technical drawings and assembly instructions., • Proficiency in using hand and power tools safely., • Strong attention to detail and manual dexterity. Preferred Qualifications: • Technical certification or vocational training in mechanics or manufacturing technology., • Experience working in a manufacturing or industrial assembly environment., • Familiarity with quality control processes and standards such as ISO., • Basic knowledge of mechanical systems and components., • Ability to use computerized tracking or inventory systems. Responsibilities: • Assemble floor components and mechanical parts according to detailed blueprints and work instructions., • Operate hand and power tools safely and effectively to complete assembly tasks., • Inspect assembled components for defects or deviations and perform necessary adjustments or repairs., • Collaborate with engineers and quality control personnel to identify and resolve assembly challenges., • Maintain a clean and organized work area while adhering to all safety and quality guidelines., • Document assembly processes and report any issues or improvements to supervisors., • Participate in continuous training to stay current with new assembly techniques and safety standards. Why Join Vanderlande? • Benefits start on day one., • The pay range for this position is $20-$25. The actual wage offered may be lower or higher depending on budget and candidate experience, knowledge, skills, qualifications and premium geographic location., • $1,000 Sign on Bonus, • We value our employees and create an environment for career growth, • Equal opportunity workplace that embraces and promotes ownership culture, empowerment, open communication, diversity, and collaboration, • Professional development and tuition reimbursement, • Matching 401(k), • 18 days of paid PTO

\n \n \n \n \n \n \n \n Responsibilities include: \n \n • Improve system performance to achieve process requirements and eliminate repetitive downs\n, • Monitor and analyze all related data to improve and maintain tool performance and address all tool related issues\n, • Coordinate supplier service and repairs where needed\n, • Prepare the technical report and summary findings and recommending solutions to technical problems\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n Qualifications\n \n Minimum requirements: \n \n • \n \n High School diploma/GED\n \n, • \n \n 18 years of age or older\n \n, • \n \n One of the following:\n \n \n, • \n \n 2 years of semiconductor experience as Technician OR\n \n, • \n \n 8 years of non-semiconductor/military Technician experience\n \n \n, • \n \n Ability to work 12 hour compressed work schedule\n \n, • \n \n Flexible to work day or night shift that will include one weekend shift and holidays\n \n \n Preferred qualifications: \n \n • Epitaxy system maintenance experience, preferable E3200, E2000, or Intrepid. Atmospheric and RP process types\n, • Self-driven with ability to identify and resolve issues to improve equipment performance\n, • Good troubleshooting skills on electrical/mechanical systems\n, • Excellent organizational, teaming and troubleshooting skills\n, • Strong verbal and written communication skills\n, • Demonstrated strong analytical, critical thinking, and problem solving skills\n, • Ability to work in teams and collaborate effectively with people in different functions\n, • Ability to take the initiative and drive for results\n, • Strong time management skills that enable on-time project delivery\n, • Ability to work effectively in an interrupt-driven, fast-paced and rapidly changing environment\n, • Demonstrated ability to build strong, influential relationship\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n About Us\n \n \n \n Why TI?\n \n \n \n, • Engineer your future. We empower our employees to truly own their career and development. Come collaborate with some of the smartest people in the world to shape the future of electronics.\n, • We're different by design. Diverse backgrounds and perspectives are what push innovation forward and what make TI stronger. We value each and every voice, and look forward to hearing yours. Meet the people of TI\n, • Benefits that benefit you. We offer competitive pay and benefits designed to help you and your family live your best life. Your well-being is important to us. Please find our country-specific benefits here\n \n \n \n \n \n \n \n \n About Texas Instruments\n \n \n Texas Instruments Incorporated (Nasdaq: TXN) is a global semiconductor company that designs, manufactures and sells analog and embedded processing chips for markets such as industrial, automotive, data center, personal electronics and communications equipment. At our core, we have a passion to create a better world by making electronics more affordable through semiconductors. This passion is alive today as each generation of innovation builds upon the last to make our technology more reliable, more affordable and lower power, making it possible for semiconductors to go into electronics everywhere. Learn more at TI.com.\n \n \n \n \n \n \n Texas Instruments is an equal opportunity employer and supports a diverse, inclusive work environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, disability, genetic information, national origin, gender, gender identity and expression, age, sexual orientation, marital status, veteran status, or any other characteristic protected by federal, state, or local laws.\n \n \n \n \n \n If you are interested in this position, please apply to this requisition.\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n TI does not make recruiting or hiring decisions based on citizenship, immigration status or national origin. However, if TI determines that information access or export control restrictions based upon applicable laws and regulations would prohibit you from working in this position without first obtaining an export license, TI expressly reserves the right not to seek such a license for you and either offer you a different position that does not require an export license or decline to move forward with your employment.\n \n \n \n \n \n \n \n

As a Maintenance Mechanic in one of our wafer fab clean rooms, you will:\n\n \n • Execute scheduled maintenance work adhering to the approved best known method for all tasks completed\n, • Track and assemble of parts required to complete maintenance ahead of time\n, • Complete qualifications required to bring equipment fully out of maintenance state and into production\n, • Track critical data from performed maintenance to define improvement opportunities for optimal PM performance\n, • Have an on-the-job training plan that provides a clear path to required certifications and advancement\n \n \n QualificationsMinimum requirements:\n \n \n, • High School diploma or equivalent\n, • Successful completion of pre-employment and hands-on maintenance mechanic tests\n, • Committed to working with a highly standardized set of instructions\n \n Preferred qualifications: \n \n • Ability to establish strong relationships with key stakeholders critical to success, both internally and externally\n, • Strong verbal and written communication skills\n, • Ability to quickly ramp on new systems and processes\n, • Demonstrated strong interpersonal, analytical and problem-solving skills\n, • Ability to work in teams and collaborate effectively with people in different functions\n, • Ability to take the initiative and drive for results\n, • Strong time management skills that enable on-time project delivery\n \n \n \n \n \n About US\n \n \n Why TI?\n \n \n \n • Engineer your future. We empower our employees to truly own their career and development. Come collaborate with some of the smartest people in the world to shape the future of electronics.\n, • We're different by design. Diverse backgrounds and perspectives are what push innovation forward and what make TI stronger. We value each and every voice, and look forward to hearing yours. Meet the people of TI\n, • Benefits that benefit you. We offer competitive pay and benefits designed to help you and your family live your best life. Your well-being is important to us. Please find our country-specific benefits here\n \n \n \n About Texas Instruments\n \n \n Texas Instruments Incorporated (Nasdaq: TXN) is a global semiconductor company that designs, manufactures and sells analog and embedded processing chips for markets such as industrial, automotive, data center, personal electronics and communications equipment. At our core, we have a passion to create a better world by making electronics more affordable through semiconductors. This passion is alive today as each generation of innovation builds upon the last to make our technology more reliable, more affordable and lower power, making it possible for semiconductors to go into electronics everywhere. Learn more at TI.com.\n \n \n Texas Instruments is an equal opportunity employer and supports a diverse, inclusive work environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, disability, genetic information, national origin, gender, gender identity and expression, age, sexual orientation, marital status, veteran status, or any other characteristic protected by federal, state, or local laws.\n \n \n If you are interested in this position, please apply to this requisition.\n \n \n TI does not make recruiting or hiring decisions based on citizenship, immigration status or national origin. However, if TI determines that information access or export control restrictions based upon applicable laws and regulations would prohibit you from working in this position without first obtaining an export license, TI expressly reserves the right not to seek such a license for you and either offer you a different position that does not require an export license or decline to move forward with your employment.\n \n \n References\n Visible links\n \n 1. https://edbz.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX/pages/4012\n \n 2. https://careers.ti.com/en/sites/CX/pages/benefits\n \n 3. https://www.ti.com/\n \n \n \n \n

The Field Sales Professional will play a pivotal part in enrolling new patients, generating leads through grassroots events and community partnerships, and nurturing leads through conversion. The ideal candidate will possess exceptional communication skills and a proven track record of successful field sales / grassroots marketing performance. This position presents an exciting opportunity to make a meaningful impact in the lives of seniors and their quality of care. You will cover the DFW area for our CenterWell clinics Responsibilities: • Identify and engage seniors through grassroots marketing and community partnerships to generate new prospective patients., • Present our value-based care model in a compelling way, emphasizing a unique value proposition and benefits for everyone to improve health outcomes., • Effectively manage and prioritize a pipeline of leads and opportunities, ensuring timely follow-up and progression through the sales cycle to drive patient growth., • Collaborate closely with internal and cross-functional teams to align sales strategies and deliver seamless experiences for our current and prospective patients., • Stay informed of industry trends, competitor activities, and emerging opportunities within the senior healthcare market adjusting sales strategies and identify new growth avenues., • Provide regular updates to leadership on sales activities, lead funnel management, and market insights to support informed decision-making and strategic planning. Required Qualifications • Bachelor's degree and/or 3+ years sales experience., • Proven track record of success in field sales or grassroots marketing; ideally field sales with a focus on senior value-based care models or Medicare Advantage., • In-depth knowledge of senior healthcare market dynamics., • Exceptional communication and interpersonal skills, with the ability to engage and build rapport with diverse stakeholders, including seniors, caregivers, and licensed agents., • Strong consultative selling skills, with a demonstrated ability to understand client needs, propose tailored solutions, and close sales effectively., • Self-motivated and results-driven, with a passion for exceeding targets and driving business growth., • Strong ability to manage time effectively, prioritize tasks, and stay organized to meet deadlines and achieve sales targets., • Ability to work independently and collaboratively in a fast-paced, team-oriented environment., • Strong knowledge in CRM software (Salesforce) and Microsoft Office suite., • This role is part of Humana's Driver safety program and, therefore, requires an individual to have a valid state driver's license and proof of personal vehicle liability insurance with at least 100,000/300,000/100,000 limits., • This is a field sales position, not work from home, and may require evening or weekend hours. Preferred Qualifications • Bilingual Spanish, • Healthcare industry and marketing experience Scheduled Weekly Hours 40 Pay Range The compensation range below reflects a good faith estimate of starting base pay for full time (40 hours per week) employment at the time of posting. The pay range may be higher or lower based on geographic location and individual pay will vary based on demonstrated job related skills, knowledge, experience, education, certifications, etc. $45,400 - $61,300 per year This job is eligible for a bonus incentive plan. This incentive opportunity is based upon company and/or individual performance. Description of Benefits Humana, Inc. and its affiliated subsidiaries (collectively, “Humana”) offers competitive benefits that support whole-person well-being. Associate benefits are designed to encourage personal wellness and smart healthcare decisions for you and your family while also knowing your life extends outside of work. Among our benefits, Humana provides medical, dental and vision benefits, 401(k) retirement savings plan, time off (including paid time off, company and personal holidays, paid parental and caregiver leave), short-term and long-term disability, life insurance and many other opportunities. About CenterWell Senior Primary Care: CenterWell Senior Primary Care provides proactive, preventive care to seniors, including wellness visits, physical exams, chronic condition management, screenings, minor injury treatment and more. Our unique care model focuses on personalized experiences, taking time to listen, learn and address the factors that impact patient well-being. Our integrated care teams, which include physicians, nurses, behavioral health specialists and more, spend up to 50 percent more time with patients, providing compassionate, personalized care that brings better health outcomes. We go beyond physical health by also addressing other factors that can impact a patient’s well-being. About CenterWell, a Humana company: CenterWell is a leading healthcare services business focused on creating integrated and differentiated experiences that put our patients at the center of everything we do. The result is high-quality healthcare that is accessible, comprehensive and, most of all, personalized. As the largest provider of senior-focused primary care, a leading provider of home healthcare and a leading integrated home delivery, specialty, hospice and retail pharmacy, CenterWell is focused on whole health and addressing the physical, emotional and social wellness of our patients. CenterWell is part of Humana Inc. (NYSE: HUM). Learn more about what we offer at CenterWell.com. Equal Opportunity Employer It is the policy of Humana not to discriminate against any employee or applicant for employment because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or protected veteran status. It is also the policy of Humana to take affirmative action, in compliance with Section 503 of the Rehabilitation Act and VEVRAA, to employ and to advance in employment individuals with disability or protected veteran status, and to base all employment decisions only on valid job requirements. This policy shall apply to all employment actions, including but not limited to recruitment, hiring, upgrading, promotion, transfer, demotion, layoff, recall, termination, rates of pay or other forms of compensation and selection for training, including apprenticeship, at all levels of employment.

Job Description Who We Are This position is with Seneca Companies Inc., an OWL Services Affiliated Company. OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. Job Title: Petroleum Installer III Job Description: Oversee responsible, safe, and efficient construction operations as the senior installer on a job site. Provide direction and training to lower-level Installers, subcontractors and other Seneca personnel in the field. What You’ll Do: • 50%: Leads Jobs: Provides direction to junior installers on each job site in order to meet job timelines. Plans, reviews and develops a layout of each job assignment as directed. Reviews project status with senior installers, supervisors, consultants and project managers on a regular basis. Completes all paper work necessary for completion of each job and makes mobile-based job updates using mobile construction applications. Controls cost by minimizing wasted resources such as materials, manpower, time, etc., • 25%: Install tanks, piping and other equipment and tests them after installation. Removes and disposes of old equipment. Maintain a clean and safe working environment at all times. Operate various power tools, skid loaders, air compressors, forklift, and other related tools and equipment in performing described duties., • 15%: Provide direction and training to lower-level installers on each job site in order to meet job timelines. Assist employees in the completion of daily tasks such as site cleanliness, travel reimbursement reporting, equipment maintenance, and navigating the company's various systems., • 5%: Maintain safe operations on every job site by directing installer team and subcontractors. Set verbal safety expectations for all personnel on and off site and leads by example. Conduct toolbox talks and tailgate talks daily and a pre-job safety brief to all installers and subcontractors on site, effectively setting expectations for safety., • 5%: Other duties as assigned., • Working Hazards: Works in an environment with potential exposure to fumes, dirt, noise, equipment movement dangers, confined spaces, vibrations, dangerous chemical/solvents, electrical shock, and inclement temperature extremes., • Physical/Mental Exertion: Ability to perform heavy physical labor exerting up to 100 pounds of force on an occasional basis and up to 50 pounds of force on a frequent basis performing such tasks as climbing, balancing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, and grasping. What We’re Looking For: • Education: Requires High School diploma or equivalent., • Experience: 4+ years of experience in the petroleum installation field required., • Licenses/Certifications: HAZWOPER 40 certification, State-issued CDL-A, State-issued UST installer license required prior to hiring., • Technical Abilities: Familiar with a variety of the field's concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals. Performs a variety of complicated tasks. Able to perform manual labor, heavy equipment inspection and operation and basic administrative tasks using mobile devices., • Autonomy/Direction: Typically reports to a supervisor or manager. A wide degree of creativity and latitude is expected. Train and direct the activities of lower level Installers and is required to make quick decisions in the field without management assistance. Must have the ability to travel overnight over 50%., • Tools and Equipment: Ability to perform manual construction work and equipment operation as described. Knowledge and experience with computer programs (ProCore, Outlook). Why Choose Seneca Companies? • Company Vehicle with Fuel Card, • Competitive Pay & Per Diem, • Health, Dental, and Vision Insurance with optional offerings of HSA and FSA, • Paid Time Off including Vacation Time, Sick Days, Personal Days, and Holidays, • Employer-Paid Short-Term Disability, • 401k with Company Match, • Tuition Reimbursement, • Company Paid Life Insurance, • Free Employee Assistance Program (EAP) and Wellness Program This job description is intended to describe the general nature and level of work being performed by the person assigned to this position. Principal duties and responsibilities are intended to describe those functions that are essential to the performance of this job, and “other” duties and responsibilities include those that are considered incidental or secondary to the overall purpose of this job. This job description does not state or imply that the above are the only duties and responsibilities assigned to this position. Employees holding this position will be required to perform any other job-related duties as requested by management. All requirements are subject to possible modification to reasonably accommodate individuals with a disability. Requisition #4042

Job Description Texas AirSystems has been shaping the HVAC landscape in Texas for over four decades. With 500+ team members and seven offices statewide, we partner with over 60 leading manufacturers to deliver custom, high-performance solutions that stand the test of time. Here, your work matters. You'll be part of a team that values collaboration, rewards curiosity, and gives you the tools to keep growing. Whether you're just getting started or looking for your next big challenge, this is a place where you can thrive and make a real impact. Vertiv HVAC Service Technician (Data Center) Location: Dallas/Fort Worth metroplex Reports to: Service Director/Area Service Manager FLSA Status: Non-Exempt The Company Texas AirSystems is the largest independent HVAC Equipment and Solutions provider in Texas. Our company has grown to five offices and over 400 employees throughout Texas, with headquarters in Irving, next to the DFW airport. We are proud members of ASA, ASHRAE, BOMA, CEF, TEXO & USGBC. We represent over 50 manufacturers, offering innovative systems with a flexibility of equipment and solutions to best match each application. We work with industry professionals and end users from the conceptual stage of projects to provide energy efficient, value‐added solutions to their complex problems. Our overall mission is simple: we want to create value and make a difference every day in our journey to be the best HVAC sales and service organization in North America. We believe we can succeed in that mission by being the BEST provider for our clients, the BEST partner for manufacturers, the BEST company for our employees, and the BEST investment for our current and future shareholders. The Opportunity We are seeking experienced HVAC Field Technicians with the ability to travel to customer sites to start up, commission, troubleshoot and repair the equipment we represent. This position requires the capability to work independently, and candidates should have strong diagnostic skills. Requires the ability to manage projects for start-up commissioning and coordination of personnel and services. This is a full-time opportunity for an energetic self-starter. An ideal candidate will be customer service oriented and work well with others. The position requires a high level of correspondence with Project Managers, Field Supervisors, Service Coordinators and customers. This position of Field Technician for our Critical Systems Solutions division is focused on support our equipment sales to data centers. Fundamental Functions & Responsibilities: • Manage projects and processes while working independently and with limited supervision, • Coaches and reviews the work of lower-level professionals, • Face difficult and sometimes complex opportunities; takes a perspective to provide solutions, • Start-up, commission, and support BMS on equipment we represent, • Perform factory start-up, commissioning, warranty service on Data Center equipment and systems we represent., • Performs electrical and mechanical inspections on equipment to ensure peak performance, • Ability to interpret engineering drawings in reference to layout, location and operation of the system(s), • Represents the company in a positive manner to other trades, contractors and owners, • Suggest additional services that are beneficial to customer, • Works in a team-based environment to share information and workload while ensuring customer satisfaction, • Submits required paperwork to Service Coordinator in a timely manner, • Must work in a safe manner daily and ensure that all safety measures are always taken, • Performs other duties as assigned, • Flexibility to work overtime/ weekends, as required Knowledge & Skills: • Ability to apply knowledge of refrigeration, air flow, and theory., • Excellent communication skills and interpersonal skills to interact effectively with diverse client groups., • Driven with the ability to work both independently and within a team., • Effectively communicate and properly describe problems and solutions., • Demonstrated technical skills to explain product functionality to customers., • Well-developed planning, organization, analytical, and decision-making skills., • Proficient computer skills, such as Excel and PowerPoint., • Ability to produce clear, timely and concise documentation and have well-developed problem-solving skills. Physical Requirements / Work Environment • Ability to travel substantially within operational region., • A flexible schedule may be required., • Willingness to work in adverse working conditions The Required Profile • High School Diploma or equivalent, • Must have valid driver's license with good driving record, • Vertiv trained or certified, • Must have current HVAC certification and OSHA 10 Training plus 5+ years' experience working as a Service Technician in a commercial environment, • Operating knowledge of Microsoft office software and working proficiency with handheld computer (i.e. Smartphone, iPad), • Electrical knowledge required and EPA Certification, Preferred (i.e. HVAC Journeyman, Master license), • Ability to work in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, risk of electrical shock (high voltage), climbing/working at elevated heights, etc., • Must be able to climb, crawl, stoop, kneel and must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds, • Ability to work independently with minimal supervision and balance requirements of multiple and varied duties Other Skills & Abilities Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mental stamina for problem solving and prioritizing multiple tasks. Environmental Requirements Will be required to work in a field environment, multiple customer sites daily Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is continually required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Job Description Exciting news! Voodoo Doughnut is now hiring stellar Shift Supervisors to be a part of our team at our Lower Greenville location in Dallas, TX! This is a part time position with the potential for full time hours. This position requires open availability. Why Voodoo? • Ditch the name tag, forget the uniforms... We believe you shine when you can be yourself!, • Music is major - the team controls the playlist in our store, • Cash in the dough! Competitive pay and tips (average $4-$6/hr), • We treasure our Shift Supervisors. We offer medical, dental, & vision benefits; paid time off; pet insurance; parental leave; weekly pay; disability & life insurance; holiday pay; EAP; and much more, • Doughnuts for days! Doughnuts are always free for our team How Do I Qualify? • 18+ to apply, • Flexible schedule - days, evenings, weekends and holidays, • Positive and professional attitude, • Strong interpersonal and communication skills, • Ability to work as a team and build lasting relationships, • Reliable transportation, • Prior experience in food production and guest service Physical Requirements • Handle cooked or raw bacon and allergens including soy, wheat, dairy, strawberries, peanuts and/or coconut, • Perform repetitive movements such as pushing, pulling, bending, twisting and stooping; stand for the duration of a shift, • Safely lift and carry heavy objects up to 50 lbs., • Work with chemicals used in cleaning and sanitizing

Job Description Smiling faces and happy people wanted! Abby's Bagels & Coffee Lower Greenville, Dallas is opening a new store and looking for people who love great food, fast-paced work, and taking care of others. We make bagels from scratch, serve coffee all day. We are a neighborhood spot that always feels welcoming. At Abby's, we practice unreasonable hospitality: • Not just good service, but noticing the small stuff and surprising people with moments they'll talk about later., • Treating every guest like a regular, and every teammate like family, whether it s 7:00 am rush or midnight cravings., • Going above and beyond in personal, thoughtful ways learning names, remembering favorite orders, and finding ways to say yes whenever we can. If you get energy from people and want to be part of a tight, hardworking crew, this is the place. Responsibilities Welcome guests, answer basic menu questions, and provide prompt, hospitable service Accurately enter dine-in, takeout, phone, online, and delivery orders into the point-of-sale system Process cash, credit-card, digital-wallet, gift-card, and other approved payments accurately Suggest bagels, spreads, sandwiches, coffee, beverages, pastries, and add-ons when appropriate Package food, beverages, catering pickups, and online orders neatly; confirm order accuracy before handoff Communicate clearly with the kitchen and bakery teams about special requests, modifications, allergies, and order issues Keep the register, counter, beverage station, dining room, condiment area, and pickup area clean, stocked, and guest-ready Restock front-of-house supplies, including bags, cups, lids, napkins, utensils, coffee supplies, merchandise, and grab-and-go products Help maintain attractive displays of bagels, baked goods, beverages, and retail items Handle customer concerns professionally and involve a manager when needed Follow cash-handling procedures, including drawer counts, shift handoffs, refunds, discounts, and closing procedures Assist with light food preparation, dishwashing, cleaning, opening, and closing duties as assigned Follow all food-safety, sanitation, allergen, uniform, and company-service standards Qualifications Previous experience as a cashier, barista, server, restaurant host, retail associate, or customer-service team member is preferred, but not required Comfortable learning and using a point-of-sale system; Toast experience is a plus Friendly, confident communication skills and a genuine hospitality mindset Strong attention to order accuracy, cleanliness, and handling payments correctly Ability to multitask and stay calm, organized, and upbeat during busy breakfast and lunch rushes Reliable attendance, punctuality, and willingness to support the full team Ability to stand for extended periods and lift or carry up to 25 pounds Availability for morning, weekend, holiday, and flexible shifts Food Handler certification, or willingness to obtain one, preferred Schedule and Compensation This position may be full-time or part-time. Shifts may include early mornings, weekends, and holidays. Pay is competitive and based on experience. To Apply Please submit your résumé and a brief note describing your customer-service or food-service experience, availability, and interest in joining Abby’s Bagels.

Job Description Warehouse Associate We are looking for a dependable, hardworking Warehouse Associate to join our team. This is a hands-on role in a fast-paced industrial environment. Responsibilities • Load, unload, and move freight safely and efficiently, • Operate a forklift to stage, stack, and retrieve product, • Climb ladders and work at heights to access outdoor tanks, • Pick, pack, and prepare orders for shipment, • Keep the warehouse clean, organized, and safe, • Help with blending and/or compounding, • Perform other duties as assigned by management Requirements • Forklift experience preferred, • Comfortable working at heights and climbing ladders, • Able to lift up to 60 lbs and stand for extended periods, • Reliable, safety-minded, and willing to pitch in wherever needed Basic/Minimum Qualifications • High school diploma or GED Benefits • Primrose Oil offers a very competitive benefits package. \nCompany Description Primrose® Oil Company, Inc. is a Dallas, Texas based manufacturer with over 100 years of experience in producing Premium Greases, Fuel Additives, Lubricants, and Oil Supplements. These products help with fuel efficiency gains, drain interval extensions, extend the life of equipment and motors, lower maintenance costs and downtime, and bring reliable equipment to business operations. We serve a wide range of markets, including Agriculture, Fleets, Government, Heavy Equipment, Industrial, Manufacturing, Marine, Oil & Gas and Trucking. Primrose offers products to all 50 states in the United States (US). Primrose® Oil Company, Inc. is a Dallas, Texas based manufacturer with over 100 years of experience in producing Premium Greases, Fuel Additives, Lubricants, and Oil Supplements. These products help with fuel efficiency gains, drain interval extensions, extend the life of equipment and motors, lower maintenance costs and downtime, and bring reliable equipment to business operations. We serve a wide range of markets, including Agriculture, Fleets, Government, Heavy Equipment, Industrial, Manufacturing, Marine, Oil & Gas and Trucking. Primrose offers products to all 50 states in the United States (US).

Class A CDL Owner Operators – Power Only Trailer Transit, Inc. is leasing experienced Class A CDL owner operators for nationwide power-only opportunities. Trailer Transit has specialized in power-only transportation for more than 45 years. Owner operators provide the tractor while customer trailers are supplied for each load — which means no trailer ownership, trailer maintenance, loading, unloading or tarping. If you're an experienced owner operator looking for consistent freight, control over the loads you accept and a company built around independent contractors, Trailer Transit wants to talk with you. Pay & Settlements 71% of line haul 100% of the fuel surcharge paid to the owner operator Accessorial pay Deadhead pay on some loads Total compensation can reach up to 80% when applicable additional compensation is combined 50% advance of total pay on each dispatch Settlements paid weekly Up to $3,000 sign-on bonus: $500 on first settlement, $500 after 3 months, $1,000 after 6 months, $1,000 after 1 year Why Owner Operators Choose Trailer Transit 100% owner-operator fleet Power-only freight ALL drop and hook No loading, no unloading, no tarping No forced dispatch Consistent year-round freight 95% of loads are direct from customers 100% of en-route loaded tolls paid Fuel discount program Base plate bonus incentive Company-provided ELD system Toll transponder and scale bypass available Voluntary health programs available through TruChoice Experienced in-house dispatch support Owner operators choose how much they want to run Monthly fee may apply to certain services. Operating Area Trailer Transit moves customer trailers throughout the lower 48 states and Canada. This is an OTR operation. Trailer Transit does not regularly offer local, regional or dedicated routes. Owner operators should be comfortable operating nationwide and taking a variety of power-only loads. There is no forced dispatch. Minimum Qualifications Be at least 23 years old Hold a valid Class A CDL Have at least 2 years of over-the-road tractor-trailer driving experience Own your own tandem-axle sleeper tractor Be a U.S. resident Be able to operate without visa sponsorship Have a tractor in good physical and mechanical condition Be able to pass a DOT annual tractor inspection before orientation in Porter, Indiana Meet DOT physical and drug-testing requirements Be registered with the FMCSA Clearinghouse Be willing to use Trailer Transit's required ELD system Be able to operate professionally throughout Trailer Transit's OTR network Trailer Transit does not have a specific tractor model-year requirement, but the tractor must meet its equipment, inspection and compliance standards. Equipment Preferences A sliding fifth wheel with a long slide is highly recommended. A tanker endorsement is also highly recommended but is not required. Ready to Lease On? If you own a qualified tandem-axle sleeper tractor, have at least two years of OTR tractor-trailer experience and are looking for a power-only owner-operator opportunity with no forced dispatch, apply today to speak with Trailer Transit's recruiting team. Requirements Be at least 23 years old Valid Class A CDL 2 years OTR tractor-trailer experience Own a tandem-axle sleeper tractor U.S. resident, no visa sponsorship Pass DOT annual tractor inspection Meet DOT physical and drug testing FMCSA Clearinghouse registration Use the company ELD Benefits 71% line haul 100% fuel surcharge Weekly settlements Up to $3,000 sign-on bonus No forced dispatch All drop and hook 100% loaded tolls paid Fuel discount program CDL Class A · Haul: OTR · Freight: Power Only / Towaway · Home time: OTR — 2–3 weeks out at a time Pay: $150,000 – $250,000 per year Required for application Do you currently have a valid Class A CDL? (required) Are you at least 23 years old? (required) Do you have at least 2 years of over-the-road tractor-trailer driving experience? (required) Do you own your own tandem-axle sleeper tractor? (required) Are you willing to run OTR throughout the lower 48 states, with opportunities to run into Canada, rather than requiring local, regional or dedicated routes? (required) Is your tractor in good physical and mechanical condition and able to pass a DOT annual inspection? (required) Are you able to meet DOT physical and drug-testing requirements? (required) Are you currently registered with the FMCSA Clearinghouse? (required) Are you willing to use Trailer Transit's required ELD system while leased to the company? (required) Does your tractor currently have a sliding fifth wheel with a long slide? (required)614ebcce-2988-4a21-9a10-1fc0c5beffbb

A career at Whole Foods Market is more than just the work you do- it's about your personal growth and creating meaningful change. Our purpose is to nourish people and the planet. That means improving how people eat, funding grants for school gardens, providing access to fresh and healthy food to people living within food deserts, alleviating poverty in developing countries, and so much more. Working with us means you are making a difference within your community and beyond. We aren't just a grocery store: we're world-changers. And with your help, we will continue to set the standards of excellence and revolutionize the grocery industry. Provides support as a member of the seafood team to include duties related to counter service, stocking, and sanitation in the seafood department. All Whole Foods Market Retail jobs require ensuring a positive company image by providing courteous, friendly, and efficient service to customers and Team Members at all times. All positions must be performed in accordance with team and store Standard Operating Procedures. Further, Team Members must be prepared and able to perform the duties inherent in other Team Member job descriptions. All positions must strive to support WFM core values and goals, promote national, regional, and store programs and initiatives, and ensure adherence to all applicable health and safety regulations including Food Safety and regulatory duties required in the department. • Ensures a fresh and appealing display by checking quality, keeping cases and shelves clean and well stocked, rotating and removing out-of-date products, filling ice tables, and performing other duties as assigned., • Maintains accurate department signage and pricing., • Maintains back stock in good order., • Maintains a safe, clean and well-organized working and shopping environment., • Assists with sampling program, keeping sample areas full, clean and appealing., • Cleans cases, glass, signs, uprights, coolers, smokers, floors, and drains as required., • Skins, bones, and cooks or smokes fish; boxes up, labels, and dates cooked fish., • Assists with periodic inventory checks., • Arrives to work station on time, appropriately groomed, dressed and ready to work; works all scheduled shifts and attends required trainings and meetings., • Provides excellent customer service, addresses needs of customers in a timely and effective manner and models suggestive selling techniques; answers phones and pages promptly and courteously., • Maximizes sales potential through effective and proper procedures for prepping, storing, rotating, stocking, and merchandising product., • Follows and complies, or ensures compliance, with established procedures, including Weights and Measures, health and sanitation, and safe work practices., • Maintains, or ensures maintenance of, a clean and sanitary working and shopping environment; maintains equipment in accordance with WFM cleanliness and safety standards., • Performs opening, mid, and closing duties as assigned; ensures accuracy of signs and pricing., • Immediately reports safety hazards and violations., • Performs other duties as assigned by store, regional, or national leadership., • Performs other duties as assigned by store, regional, or national leadership., • Ability to sell proactively., • Ability to learn basic knowledge of all products carried in department., • Ability to visually examine products for quality and freshness., • Proactively reads labels and familiarizes oneself on various products., • Assists with periodic inventory checks., • Strong to excellent communication skills and willingness to work as part of a team., • Ability to deliver information in a clear and respectable manner to fellow Team Members, customers, and vendors., • Ability to meet customer service expectations and standards in all interactions with customers, vendors, and Team Members., • Ability to follow directions and procedures; effective time management and organization skills., • Passion for natural foods and the mission of Whole Foods Market., • Strong work ethic and ability to work in a fast-paced environment with a sense of urgency., • Understanding of and compliance with WFM quality goals., • No prior retail experience required., • Must be able to lift 50 pounds., • In an 8-hour work day: standing/walking 6-8 hours., • Hand use: single grasping, fine manipulation, pushing and pulling., • Work requires the following motions: bending, twisting, squatting and reaching., • Exposure to FDA approved cleaning chemicals., • Exposure to temperatures: <32 degrees Fahrenheit (freezing), 32-40 degrees Fahrenheit (refrigerators), >90 degrees Fahrenheit., • Ability to work in a wet and cold environment., • Ability to handle knives and other cutting equipment., • Ability to work a flexible schedule including nights, weekends, and holidays as needed., • Ability to use tools and equipment, including box cutters, electric pallet jacks, and other heavy machinery. Note: The purpose of this document is to provide a general summary of essential responsibilities for the position and is not meant as an exhaustive list. This document does not reflect all job duties or requirements for every position. Requirements build as one progresses through the job levels, so any job duties required at a lower level may be required at the higher level in addition to the duties listed for that higher level. Duties, assignments, and other responsibilities may differ for similar positions based on business conditions, departmental or geographic location, and/or needs for the particular position. An individual must demonstrate successful performance in their current position before being considered for promotion. In addition, in order to promote into a higher-level position, a business need for the promotion must exist and the candidate must be considered the most qualified person for the new position. Completion of certain milestones such as obtaining an advanced degree or certification, time in current position, or developing skills to perform at the higher-level role do not guarantee a promotion The wage range for this position is $15.00-$24.40 Hourly, commensurate with experience. Whole Foods Market offers "Whole Benefits". Whole Benefits offers a wide range of benefits for Full and Part-Time Team Members, including eligibility for a store discount, paid time off, financial wellness, health & wellness support programs, and access to other Team Member perks. Eligibility for Whole Benefits is determined under the terms of the applicable Whole Benefits plan at a person’s date of hire and may vary based on work location, length of service, and job type (such as regular or seasonal). Click here for benefit details. New entry level Team Members who successfully complete their first 90-days of employment and who remain actively employed in an eligible role, may be eligible for a base rate increase after their 90-day anniversary. At Whole Foods Market, we provide a fair and equal employment opportunity for all Team Members and candidates regardless of race, color, religion, national origin, gender, pregnancy, sexual orientation, gender identity/expression, age, marital status, disability, or any other legally protected characteristic. Whole Foods Market hires and promotes individuals solely based on qualifications for the position to be filled and business needs. Whole Foods Market works with job sites like Indeed, LinkedIn, and ZipRecruiter to promote opportunities at our company. Please be aware that other career sites may not be accurate or up to date and may even be fraudulent. We encourage and recommend all candidates to apply via our site.

Job DescriptionDescriptionJob Summary: The DOT/Fleet Compliance Representative is responsible for the management of documentation, record keeping, training program content, vehicle accident investigation and ensuring HOLT’s compliance to Federal Motor Carrier Safety Administration (FMCSA) regulations. The incumbent in this position is expected to model the following practices on a daily basis: • Demonstrate alignment with the company's mission and core business values;, • Collaborate with key internal/external resources;, • Participate in ongoing self-development. Essential Functions • Maintains employee’s driver qualification files per DOT guidelines such as; ensuring employees’ driver license/CDL, medical cards, drug history, MVR, crash information, Hour-Of-Service, and vehicle maintenance information are properly documented file in accordance to standards, • Responsible for conducting and managing of vehicle incidents investigations, performing root cause analysis and reporting results to appropriate source and provide guidance to supervisory staff, • Ensures that we operate in full accordance with the FMCSR and stays current with changes; provides updates on such, • Ensures that our CSA scores and associated BASIC information is accurate; offers recommendations and action plan based on data and trends or inaccuracies, • Reviews and tracks DOT inspections - maintaining roadside inspection files and conduct audits of reports; maintain local/state/federal required documentation for DOT inspection and driver records to per regulatory requirement, • Maintains a vehicle accident register to comply with Federal, State, and/or Company procedures, • Performs desk-top audit of 3rd party trucking companies, evaluates drivers, using data to develop trends; audits records, audits drivers against policy and procedures, • Provides training to supervisors and drivers, review Learning Management System training content; develop training modules and facilitating onsite training to technicians, drivers, and managers on a variety of driving compliance topics, • Facilitates vehicle inspection training sessions to supervisors, managers, and regional safety supervisor on vehicle inspection procedures and requirements, and audit inspections performed, • Performs data analysis on accident and violation information (e.g. HOS, Overspeeds, Inspections, etc.) focus areas for remediation and prevention, • Provides on-site inspections of Commercial Motor Vehicle equipment to align with Federal and/or State requirements, • Reviews and reports on audit results, writes safety regulation procedures, updates programs, and track hazard corrective actions to completion, • Serves as a resource to review and offer input and approval on driver applicants relative to their past employment and driving record, • Leads efforts to ensure driver safety performance through the use of our onboard computer system and associated monitoring systems, • Represents organization to external stakeholders such as customers or regulatory agencies, support customer audits, legal proceedings and/or depositions, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Requires regular and punctual employee attendance, • Performs other duties as assigned Knowledge, Skills, and Abilities • Strong working knowledge of 49 CFR, State and Federal motor carrier safety regulations, • DOT compliance management is required, • Strong computer skills in MS Office including data manipulation and presentation techniques, • Track and record of reducing site incident rates and communicate safety awareness, • Strong communication skills both verbal and written, • Ability to multitask in an environment of changing priorities, • Training module generation that aligns with policy and procedure; training facilitation skills to keep internal customers engaged, • Proven self-starter with a track record of managing multiple complex tasks with the ability to work across multiple functional areas internally and externally, • Excellent problem-solving and critical-thinking skills and an ability to identify problems, design and articulate solutions, and implement change, • Strong customer service skills; prefer experience in service oriented industry such as outsourced service providers or construction companies, • Ability to analyze the root cause during incident investigations (FMEA, Taproot, 5 Why’s) and provide professional report out RequirementsEducation and Experience: • High school diploma or equivalent with additional specialized/technical training or some college, • A minimum of five to ten years of DOT or FMSCA Compliance experience, • FMSCA Certified Vehicle Inspector, FMSCA Certified Safety Investigator or Safety Auditor, NTC FMSCA Instructor Certification preferredSupervisory Responsibilities:, • NoneTravel:, • Travel up to 35% with some overnight stay, but not limited to twice per month depending upon region, • Valid driver’s license required, • A commercial driver’s license preferredPhysical Requirements:, • To perform this job successfully, an individual must be able to perform each job duty and responsibility satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform job duties and responsibilities, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently moves materials or equipment weighing up to 30 lb, • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders, • Be able to maneuver safely and work underneath equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect workWork Environment:, • Regularly works indoors and outdoors around moving mechanical parts and equipment, • Exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Noise level may be loud at times, • Exposure to small quantities of chemicals, steam, and high-pressure water, high speed rotating equipment, and contaminantsDisclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job DescriptionDescriptionThis position is responsible for responding to customers' needs in a positive, caring, and timely manner while demonstrating a sense of urgency. Must also provide prompt, accurate, and efficient processing of all parts transactions and related warehouse activities. This requires working independently, with specific direction or as a member of a team. The incumbent in this position is expected to model the following practices daily: • Demonstrate alignment with the company's mission and core business values;, • Collaborate with key internal/external resources;, • Participate in ongoing self-development. Essential Functions • Models, promotes, and reinforces the consistent use of HOLT’s Values Based Leadership (VBL) tools, models and processes to ensure alignment with our Vision, Values, and Mission, • Works safely always and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Adheres to contamination control and HAZMAT rules and regulations, • Maintains all company equipment, warehouse environment, tools, and work areas in a good, clean, and working order, • Completes all parts order pulling transactions for external and internal customers in an accurate, timely and supportive manner to ensure customer satisfaction, • Completes all stock replenishment tasks in an accurate, timely and supportive manner to ensure proper inventory status in parts warehouse. To be monitored by management observation and stock order analysis reports, as well as daily and year end physical inventories, • Maintains parts operations office, warehouse, and outside yards, so that they are neat and orderly as assessed by the department manager, • Develops sales and inventory skills by completing internal training programs as determined by performance review goal setting guide for self-improvement and achievement of other KRA's, • Completes internal parts orders and identifies parts for return communicates job status to supervisor as needed, • Learns how to place 3rd party orders through the CODA system and how to receive orders through the CODA system, • Performs housekeeping duties while adhering to contamination control guidelines, • Works overtime as required by workload, • Requires regular and punctual employee attendance, • Performs other duties as assigned Knowledge, Skills, and Abilities • Ability to meet all requirements as outlined in the Parts Warehouse Position Designation Guidelines to include order pulling, job related software, forklift operation, hydraulic hose building, ladder JSA, battery JSA, prime mover JSA, will counter operations, and all applicable policies and procedures, • General knowledge of equipment and tools, including their designs, uses, repair and maintenance, • Knowledge and proficiency with current computer software and related hardware, • Operation and control skills of equipment or systems, • Equipment selection skills by determining the kind of tools and equipment needed to do a job, • Ability to follow logical troubleshooting procedures, • Ability to work independently and as part of a team, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair including an overhead crane, • Ability to operate a conventional forklift, • Ability to operate the controls of a machine or a vehicle quickly and repeatedly to exact positions, • Ability to be self-starting and self-motivated, • Good verbal and written communication skills, • Ability to read, write, and understand information, • Ability to listen to and understand information and ideas presented through spoken words and sentences RequirementsEducation and Experience: • High school diploma or equivalent required, • Up to two years of experience, • Must complete HOLT VBL and DiSC trainingSupervisory Responsibilities:, • NoneTravel:, • Up to 10% travel may be required & may require overnight stays, • Ability to travel between stores within region for special projects and/or company needs Physical Requirements:, • To perform this job successfully, an individual must be able to perform each job duty and responsibility satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform job duties and responsibilities, • Significant amount of time standing, walking, kneeling, crouching, stooping, climbing, and reaching, • Constant movement and use of hands, this position requires good manual dexterity, • Communicates with customers, supervisor, manager, and co-workers, • Routinely reacts to visual, auditory, and other signals including alarms and instructions, and is required to visually inspect work, • Frequently lifts and moves materials and equipment up to 50 lbs.; must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipmentWork Environment:, • Regularly works indoors around moving mechanical parts and may be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment, • Works in extremely bright or inadequate lighting, • Exposure to high noise levels and body vibration, • Works in an enclosed and open vehicle or equipment, • Requires wearing common protective or safety equipment, • Exposure to minor burns, cuts, bites, or stings, • Potential WMS work environment Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Fluent English speaker with strong, clear written communication and comfortable with natural, everyday conversational speech. For non-core work, such as during initial project onboarding or project overtime phases, lower rates apply.

Fluent English speaker with strong, clear written communication and comfortable with natural, everyday conversational speech. For non-core work, such as during initial project onboarding or project overtime phases, lower rates apply.

Job DescriptionCompany Description RRD is a leading global provider of marketing, packaging, print, and supply chain solutions that elevate engagement across the complete customer journey. The company offers the industry’s most trusted portfolio of creative execution and world-wide business process consulting, with services designed to lower environmental impact. With 22,000 clients, including 93% of the Fortune 100, and 32,000 employees across 28 countries, RRD brings the expertise, execution, and scale designed to transform customer touchpoints into meaningful moments of impact. Job Description 1st shift: 630AM - 5PM / OT as needed Monday - Friday (must be able to work weekends and holidays as needed) Pay: $20 - $25.00 hourly • Perform preventive/corrective maintenance on equipment and facility., • Assist Operators with minor maintenance issues to consistently obtain the standard operating efficiency of the system and minimize safety, quality, and downtime risks., • Ability to demonstrate the operation of and test the equipment and analyzing malfunctions to correct the problem., • Intermediate troubleshooting skills, ability to resolve routine issues without additional support., • Proficient in at least two areas of printing, bindery, or packaging machine maintenance., • Ability to conduct rebuilds on equipment., • Maintains records of repairs, calibrations, tests, and standard setting processes., • Communicates equipment problems that are beyond their abilities to the support group., • Accountability for following a process during purchasing usage and/or recording of consumables. Identify and evaluate improvement activities resulting in quantifiable increased results., • Ability to train other technicians and assist Level 3 Maintenance Technicians (to include implementation of upgrades). ADDITIONAL RESPONSIBILITIES • Assist operators with minor maintenance issues as needed and replace broken or damaged items in a timely manner., • Performs electrical and/or mechanical troubleshooting and repairs in response to equipment errors or failures., • Make recommendations on repair strategies and priorities., • Ability to review, interpret, and understand performance data that will enable them to identify and implement performance improvement activities., • Lead and/or assist with local Engineering upgrades and projects.Qualifications EDUCATION • High School Diploma or GED equivalent (required), • Mechanical and/or Electronic courses (preferred) EXPERIENCE • Typically requires four to five years' experience or equivalent education., • Strong mechanical aptitude and conscientiousness., • Ability to work in a fast-paced environment under time constraints., • Strong communication and problem-solving skills., • Experience using Windows based PC applications., • Experience with electronics and pneumatics., • Intermediate electrical troubleshooting on AC / DC circuits with multi-meter., • Basic root cause analysis skills should be demonstrated., • Demonstrated ability to work with saws, drills, cutters, grinders, torches, welders, and other fabrication equipment as needed. KNOWLEDGE/SKILLS/ABILITIES • Maintaining compliance with changing OSHA regulations., • Repair machines immediately, or prepare a work order due to the complexity of the work., • Have working knowledge of lock out tag out and hot work permits procedures. Ability to understand and follow verbal and simple written instructions. EQUIPMENT/SOFTWARE UTILIZED • Powered industrial trucks, forklift, and pallet jack., • Handheld Multi-meter for AC / DC electrical circuits. COMMUNICATION AND CONTACTS • Converses with equipment operators to ascertain whether mechanical or human error contributed to equipment failures., • Requires continuous communication with Team Leaders and Managers to update status and align equipment priorities., • Communication with suppliers, customers (internal and external), and corporate engineering is required. DECISION MAKING • Judgment and decision-making required on a daily basis concerning machine downtime and trouble-shooting., • Demonstrate the ability to determine quality or safety failures from machine troubleshooting. PHYSICAL DEMANDS / WORKING CONDITIONS • Ability to perform physical labor, prolonged walking, standing, lifting up to 40lbs. on a regular basis, stooping, bending and ladder climbing., • Willingness to work a flexible schedule., • Ability to work extended hours, weekends and holidays. Additional Information The national pay range for this role is $20.00 - $25.00 The pay range may be slightly lower or higher based on the geographic location of the hired employee. The actual pay offered may vary based upon, but not limited to: education, skills, experience, proficiency, performance, shift and location. In addition to base salary, depending on the role, the total compensation package may also include participation in a bonus, commission or incentive program. RRD offers benefits including medical, dental, and vision coverage, paid time off, disability insurance, 401(k) with match, life insurance and other voluntary supplemental insurance coverages, plus tuition assistance, maternity leave, adoption assistance, and employer/partner discounts. #LI-NH1 #RRDCORP All employment offers are contingent upon the successful completion of both a pre-employment background and drug screen. RRD is an Equal Opportunity Employer, including disability/veterans At RRD, we value innovation, authenticity, and integrity. To uphold the security and fairness of our hiring process, we ask that candidates refrain from using AI tools during interviews to ensure an authentic and secure experience. We appreciate your cooperation as we work to maintain a transparent and equitable hiring process. All employment offers are contingent upon the successful completion of both a pre-employment background and drug screen.

Job DescriptionDescriptionHOLT CAT is hiring a heavy construction equipment Shop Service Technician 4 for our Irving, Texas location. The Shop Service Technician is responsible for performing inspections, diagnoses, and repairs of diesel-powered heavy construction equipment and/or related equipment or components, following established procedures and guidelines. Works independently or as a member of a team to provide mechanical services that satisfies customer needs and achieves departmental goals. Mid-level position – Generally has more than seven years of experience and/or demonstrated job relevant knowledge/skills. A Level IV Technician has a broad knowledge of the field’s standard and technical concepts, practices, and procedures. Relies on extensive experience and judgment to plan and accomplish goals. Performs a variety of standard, complex, and technical tasks; is self-starting and requires minimal supervision; is often a team member on a large project. We are located at 3131 State Highway 161, Irving, Texas 75062. Our hours for this position are Monday through Friday 7am to 4pm. Essential Functions • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Troubleshoots and diagnoses equipment malfunctions and failures, • Disassembles and assembles of machine components to manufacturer’s specifications through the use of hand tools, pneumatic tools, and any specialized tooling, • Rebuilds, repairs, reconditions, and maintains equipment and components, • Demonstrates good customer relations and support; communicates customer needs to shop management, • Plans and controls cost of repair jobs, • Completes parts orders and identifies parts for return, • Provides a significant amount of task and behavior-oriented mentoring, and training to others, • Maintains all equipment and work areas – keeps in good, clean, and orderly condition, • Completes all documents associated with repairs in a timely manner, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Works overtime as required by workload and customers’ needs, • Updates job knowledge by participating in educational opportunities; e.g., ProTech Technician Training Paths, • Requires regular and punctual employee attendance, • Performs other duties as assigned The incumbent in this position is expected to model the following practices on a daily basis: • Demonstrate alignment with the company's mission and core business values, • Collaborate with key internal/external resources, • Participate in ongoing self-development. Knowledge, Skills, and Abilities • Extensive knowledge of machines and tools, including their designs, uses, repair, and maintenance, • Knowledge of heavy equipment machines such as dozers, excavators, motor graders, and other dirt moving equipment preferred, • Knowledge of aftertreatment systems and how to troubleshoot, diagnose, and repair efficiently and safely., • Demonstrates proficiency with current computer software, related hardware, and machine electronic systems - CAT ET & CAT SIS, • Quality control analysis skills - Conducting tests and inspections of products, services, or processes to evaluate quality or performance and communicate findings, • Operation and control skills - Controlling operations of equipment or systems, • Equipment selection skills - Determining the kind of tools and equipment needed to do a job, • Ability to operate a conventional forklift and an overhead crane, • The ability to quickly and repeatedly operate the controls of a machine or a vehicle to exact positions, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair, • The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects, • The ability to read, write, and understand information, • The ability to listen to and understand information and ideas presented through spoken words and sentences, • Must have/acquire basic mechanic hand and pneumatic tools (metric/standard) RequirementsEducation and Experience: • Seven or more years of diesel-powered heavy construction equipment repair experience preferred, • Ability and knowledge to read/use schematics and diagrams experience is preferred, • High school diploma or equivalent preferred, • Graduation from a diesel technology program preferred Supervisory Responsibilities:, • NoneTravel, • Some travel is expected for this positionPhysical Requirements, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently moves materials or equipment weighing up to 50 pounds, • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Be able to maneuver safely and work underneath equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect workWork Environment, • Regularly works indoors around moving mechanical parts, • May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Noise level may be loud at times, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high speed rotating equipment, • Requires wearing common protective or safety equipment, • Required to perform work in cramped spaces and/or high placesDisclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job DescriptionDescriptionHolt CAT in north Dallas is looking for a experienced heavy construction equipment technician. This position is responsible for performing inspections, diagnoses, and repairs of diesel-powered heavy construction equipment and/or related equipment or components, following established procedures and guidelines. Must be able to work independently or as a member of a team to provide mechanical services that satisfies customer needs and achieves departmental goals. Mid-level position – Generally has more than four years of experience and/or demonstrated job relevant knowledge/skills. A Level III Technician has moderate knowledge of the field’s standard and technical concepts, practices, and procedures. Level III Technician performs a variety of standard, complex, and technical tasks; is indirectly supervised and self-starting; often a team member on a large project. Essential Functions • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Troubleshoots and diagnoses construction equipment malfunctions and failures, • Disassembles and assembles of machine components to manufacturer’s specifications through the use of hand tools, pneumatic tools, and any specialized tooling, • Rebuilds, repairs, reconditions, and maintains equipment and components, • Demonstrates good customer relations and support; communicates customer needs to shop management, • Plans and controls cost of repair jobs, • Completes parts orders and identifies parts for return, • Mentors and helps train other technicians, • Maintains all equipment and work areas – keeps in good, clean, and orderly condition, • Completes all documents associated with repairs in a timely manner, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Works overtime as required by workload and customers’ needs, • Updates job knowledge by participating in educational opportunities; e.g., ProTech Technician Training Paths, • Requires regular and punctual employee attendance, • Performs other duties as assigned The incumbent in this position is expected to model the following practices on a daily basis:, • Demonstrate alignment with the company's mission and core business values, • Collaborate with key internal/external resources, • Participate in ongoing self-development. Knowledge, Skills, and Abilities • Knowledge of machines and tools, including their designs, uses, repair, and maintenance, • Knowledge of heavy construction equipment machines such as dozers, excavators, motor graders, and other dirt moving equipent preferred, • Demonstrates proficiency with current computer software, related hardware, and machine electronic systems - CAT ET & CAT SIS Preferred, • Quality control analysis skills - Conducting tests and inspections of products, services, or processes to evaluate quality or performance and communicate findings, • Operation and control skills - Controlling operations of equipment or systems, • Equipment selection skills - Determining the kind of tools and equipment needed to do a job, • Ability to operate a conventional forklift and an overhead crane, • The ability to quickly and repeatedly operate the controls of a machine or a vehicle to exact positions, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair, • The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects, • The ability to read, write, and understand information, • The ability to listen to and understand information and ideas presented through spoken words and sentences, • Must have basic mechanic hand and pneumatic tools (metric/standard) RequirementsEducation and Experience: • Four or more years of diesel-powered heavy equipment repair experience preferred, • Ability and knowledge to read/use schematics and diagrams experience is preferred, • High school diploma or equivalent preferred, • Graduation from a diesel technology program preferred Supervisory Responsibilities:, • NoneTravel, • Some travel is expected for this positionPhysical Requirements, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently moves materials or equipment weighing up to 50 pounds, • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Be able to maneuver safely and work underneath equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect workWork Environment, • Regularly works indoors around moving mechanical parts, • May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Noise level may be loud at times, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high speed rotating equipment, • Requires wearing common protective or safety equipment, • Required to perform work in cramped spaces and/or high placesDisclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #heavyequipment #HOLTCAT #CAT #CATERPILLAR #DOZER #EXCAVATOR #MOTORGRADER #DIESELMECHANIC #HYDRAULIC

Job DescriptionDescriptionHolt CAT in Irving, Texas is looking for a experienced heavy construction equipment Shop Service Technician for our day shift position. This position is responsible for performing inspections, diagnoses, and repairs of diesel-powered heavy construction equipment and/or related equipment or components, following established procedures and guidelines. Works independently or as a member of a team to provide mechanical services that satisfies customer needs and achieves departmental goals. Mid-level position – Generally has more than seven years of experience and/or demonstrated job relevant knowledge/skills. A Level IV Technician has a broad knowledge of the field’s standard and technical concepts, practices, and procedures. Relies on extensive experience and judgment to plan and accomplish goals. Performs a variety of standard, complex, and technical tasks; is self-starting and requires minimal supervision; is often a team member on a large project. Essential Functions • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Troubleshoots and diagnoses equipment malfunctions and failures, • Disassembles and assembles of machine components to manufacturer’s specifications through the use of hand tools, pneumatic tools, and any specialized tooling, • Rebuilds, repairs, reconditions, and maintains construction equipment and components, • Demonstrates good customer relations and support; communicates customer needs to shop management, • Plans and controls cost of repair jobs, • Completes parts orders and identifies parts for return, • Provides a significant amount of task and behavior-oriented mentoring, and training to others, • Maintains all equipment and work areas – keeps in good, clean, and orderly condition, • Completes all documents associated with repairs in a timely manner, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Works overtime as required by workload and customers’ needs, • Updates job knowledge by participating in educational opportunities; e.g., ProTech Technician Training Paths, • Requires regular and punctual employee attendance, • Performs other duties as assigned The incumbent in this position is expected to model the following practices on a daily basis: • Demonstrate alignment with the company's mission and core business values, • Collaborate with key internal/external resources, • Participate in ongoing self-development Knowledge, Skills, and Abilities • Extensive knowledge of machines and tools, including their designs, uses, repair, and maintenance, • Knowledge of heavy equipment machines such as dozers, excavators, motor graders, and other dirt moving equipment preferred, • Knowledge of after treatment repairs, troubleshooting and diagnosing, • Knowledge of major repairs on engines, fuel systems, electrical systems, hydraulic systems and overhaul complete machines., • Demonstrates proficiency with current computer software, related hardware, and machine electronic systems CAT ET & CAT SIS2.0, • Quality control analysis skills - Conducting tests and inspections of products, services, or processes to evaluate quality or performance and communicate findings, • Operation and control skills - Controlling operations of equipment or systems, • Equipment selection skills - Determining the kind of tools and equipment needed to do a job, • Ability to operate a conventional forklift and an overhead crane, • The ability to quickly and repeatedly operate the controls of a machine or a vehicle to exact positions, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair, • The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects, • The ability to read, write, and understand information, • The ability to listen to and understand information and ideas presented through spoken words and sentences, • Must have/acquire basic mechanic hand and pneumatic tools (metric/standard) RequirementsEducation and Experience: • Seven or more years of diesel-powered heavy equipment repair experience preferred, • Ability and knowledge to read/use schematics and diagrams experience is preferred, • High school diploma or equivalent preferred, • Graduation from a diesel technology program preferred Supervisory Responsibilities:, • NoneTravel, • Some travel is expected for this positionPhysical Requirements, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently moves materials or equipment weighing up to 50 pounds, • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Be able to maneuver safely and work underneath equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect workWork Environment, • Regularly works indoors around moving mechanical parts, • May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Noise level may be loud at times, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high speed rotating equipment, • Requires wearing common protective or safety equipment, • Required to perform work in cramped spaces and/or high placesDisclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job DescriptionDescriptionHOLT CAT in Irving, Texas is looking for a heavy construction equipment Shop Servcie Tech 3 for the component rebuild center. This mechanic position is responsible for performing inspections, diagnoses, and repairs of diesel-powered heavy equipment and/or related equipment or components, following established procedures and guidelines. The mechanic should be able to work independently or as a member of a team to provide mechanical services that satisfies customer needs and achieves departmental goals. We are located at 2000 E. Airport Freeway, Irving, TX 75061. The hours for this position are Monday through Friday 7:00 AM to 4:00 PM. Essential Functions • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Troubleshoots and diagnoses equipment malfunctions and failures, • Disassembles and assembles of machine components to manufacturer’s specifications through the use of hand tools, pneumatic tools, and any specialized tooling, • Rebuilds, repairs, reconditions, and maintains equipment and components, • Demonstrates good customer relations and support; communicates customer needs to shop management, • The Technician must be able to plan and controls cost of repair jobs, • The Technician must be able to document all work performed electronically, • The Technician must be able to practice all safety protocols and follow company safety guidelines, • The Technician must be able to order parts online and identifies parts for return, • Mentors and helps train other technicians, • Maintains all equipment and work areas – keeps in good, clean, and orderly condition, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Works overtime as required by workload and customers’ needs, • Updates job knowledge by participating in educational opportunities; e.g., ProTech Technician Training Paths, • Requires regular and punctual employee attendance, • Performs other duties as assigned The incumbent in this position is expected to model the following practices on a daily basis:, • Demonstrate alignment with the company's mission and core business values, • Collaborate with key internal/external resources, • Participate in ongoing self-development. Knowledge, Skills, and Abilities • Knowledge of machines and tools, including their designs, uses, repair, and maintenance, • Knowledge of heavy equipment machines such as dozers, excavators, motor graders, and other dirt moving equipent preferred, • Demonstrates proficiency with current computer software, related hardware, and machine electronic systems (CAT ET & CAT SIS experience is preferred)., • Quality control analysis skills - Conducting tests and inspections of products, services, or processes to evaluate quality or performance and communicate findings, • Operation and control skills - Controlling operations of equipment or systems, • Equipment selection skills - Determining the kind of tools and equipment needed to do a job, • Ability to operate a conventional forklift and an overhead crane, • The ability to quickly and repeatedly operate the controls of a machine or a vehicle to exact positions, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair, • The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects, • The ability to read, write, and understand information, • The ability to listen to and understand information and ideas presented through spoken words and sentences, • Must have/acquire basic mechanic hand and pneumatic tools (metric/standard)Mid-level position – Generally has more than four years of experience and/or demonstrated job relevant knowledge/skills. A Level III Technician has moderate knowledge of the field’s standard and technical concepts, practices, and procedures. Level III Technician performs a variety of standard, complex, and technical tasks; is indirectly supervised and self-starting; often a team member on a large project. RequirementsEducation and Experience: • Four or more years of diesel-powered heavy equipment repair experience preferred, • Ability and knowledge to read/use schematics and diagrams experience is preferred, • High school diploma or equivalent preferred, • Graduation from a diesel technology program preferred Supervisory Responsibilities:, • NoneTravel:, • Some travel is expected for this positionPhysical Requirements:, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently moves materials or equipment weighing up to 50 pounds, • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Be able to maneuver safely and work underneath equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect workWork Environment:, • Regularly works indoors around moving mechanical parts, • May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Noise level may be loud at times, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high speed rotating equipment, • Requires wearing common protective or safety equipment, • Required to perform work in cramped spaces and/or high placesDisclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job DescriptionDescriptionThis position demonstrates the ability to perform basic inspections, basic diagnoses, and basic repairs of heavy equipment and/or related equipment or components, following established procedures and guidelines. Works as a member of a team to provide basic mechanical services that satisfies customer needs and achieves departmental goals. Entry-level position – Generally has less than two years of experience and/or demonstrated job relevant knowledge/skills. Relies on instructions and pre-established guidelines to perform the functions of the job; works under immediate supervision. The incumbent in this position is expected to model the following practices on a daily basis: • Demonstrate alignment with the company's mission and core business values, • Collaborate with key internal/external resources, • Participate in ongoing self-development Essential Functions • Performs basic troubleshooting and diagnosing of equipment malfunctions and failures, • Assists in the rebuilding, repairing, and maintaining of equipment and components, • Learns how to plan equipment and component repairs, • Learns how to complete parts orders and identify parts for return, • Maintains all equipment and work areas – keeps in good, clean, and orderly condition, • Completes all documents associated with repairs in a timely manner, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Works overtime as required by workload and customers’ needs, • Updates job knowledge by participating in educational opportunities; e.g., ProTech Technician Training Paths, • Requires regular and punctual employee attendance, • Performs other duties as assigned Knowledge, Skills, and Abilities • General knowledge of equipment and tools, including their designs, uses, repair, and maintenance, • Demonstrates proficiency with current computer software, related hardware, and machine electronic systems, • Operation and control skills - Controlling operations of equipment or systems, • Equipment selection skills - Determining the kind of tools and equipment needed to do a job, • Ability to operate a conventional forklift, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair, • The ability to quickly and repeatedly operate the controls of a machine or a vehicle to exact position, • The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects, • The ability to read, write, and understand information, • The ability to listen to and understand information and ideas presented through spoken words and sentencesAdditional Requirements:, • Must have/acquire basic mechanic hand and pneumatic tools (metric/standard) RequirementsEducation and Experience: • One or more years of work-related skill, knowledge, or experience is preferred, • High school diploma or equivalent preferredSupervisory Responsibilities:, • NoneTravel:, • No travel is expected for this positionPhysical Requirements:, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently moves materials or equipment weighing up to 50 pounds, • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Be able to maneuver safely and work underneath equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work Work Environment:, • Regularly works indoors around moving mechanical parts, • May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Noise level may be loud at times, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high speed rotating equipment, • Requires wearing common protective or safety equipment, • Required to perform work in cramped spaces and/or high placesDisclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #HOLTCG

Job DescriptionDescriptionThe Shop Service Paving Technician is responsible for the inspection, troubleshooting, diagnosing, repairing, and reconditioning of paving construction equipment in a shop environment. The hours for this position are Monday through Friday, 7:00 AM to 5:00 PM. We are located at 2000 East Airport Freeway, Irving, Texas 75062. CAT Paving Equipment Repair Preferred The incumbent in this position is expected to model the following practices on a daily basis: • Demonstrate alignment with the company's mission and core business values;, • Collaborate with key internal/external resources;, • Participate in ongoing self-development. Essential Functions • Performs repairs and troubleshooting with minimal supervision, • Performs troubleshooting and diagnoses of paving equipment malfunctions and failures, • Removes and install parts, disassembles and assembles components, and tests and adjusts assemblies, • Repairs and/or replaces components according to CAT standards, • Tests and verifies proper operation of all repairs and adjustments, • Prepares and completes all job related documents, writes service reports, orders parts, and maintains clear customer records; in addition, accesses databases required to complete job (work order, parts order, Vision Link, DBS, SimsSI, SIS web), • Operates equipment and vehicles with possession of all necessary licenses and certificates, • Adheres to contamination control and HAZMAT rules and regulations, • Maintains all company equipment, tools, and vehicle in good, clean, and working order, • Communicates job progress to supervisor and customer as needed, • Complete assigned jobs and task to meet/exceed flat rate times and re-do metric standards, • Works overtime as required by workload and customers’ needs, • Completes all assigned Technician Training Path courses and safety training in a timely and proficient manner, • Projects professionalism with both internal and external customers, including personal appearance, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Requires regular and punctual employee attendance, • Performs other duties as assigned Knowledge, Skills, and Abilities • Knowledge of complex grade control systems, special software/hardware required for machine communication and diagnoses, intelligent compaction, machine application, asphalt densities, mat deformities, and correct machine operation procedures, • Knowledge of equipment and tools, including their designs, uses, repair, and maintenance, • Knowledge of safe work procedures and practices, • Demonstrates proficiency with current computer software, related hardware, and machine electronic systems, • Exceptional skills in customer service, • Excellent diagnostic and trouble-shooting skills, • Planning and organizing skills to prioritize and plan work activities; uses time efficiently; plans for additional resources, • Operation and control skills to control operations of equipment or systems, • Equipment selection skills to determine the kinds of tools and equipment needed to do a job, • Ability to communicate clearly and effectively, both verbally and in writing, • Ability to operate a conventional forklift, • Ability to meet deadlines and work under fast-paced, highly stressful, and time constraining circumstances, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair, • The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects, • The ability to read, write, and understand information, • The ability to listen to and understand information and ideas presented through spoken words and sentences RequirementsEducation and Experience: • More than one year of heavy equipment experience required; three or more years preferred, • Valid Commercial Driver's License (CDL) and acceptable driving record preferred, • Must own required tools to perform repairs, • High school diploma or equivalent preferredSupervisory Responsibilities:, • NoneTravel:, • Minimal travel expected but could be up to 15% with the possibility of overnight travelPhysical Requirements:, • To perform this job successfully, an individual must be able to perform each job duty and responsibility satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform job duties and responsibilities, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently moves materials or equipment weighing up to 50 lb, • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Be able to maneuver safely and work underneath equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect workWork Environment:, • Regularly works indoors around moving mechanical parts and noise level may be loud at times; occasionally works outdoors in environmentally controlled conditions, • Exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high speed rotating equipment, • Requires wearing common protective or safety equipment, • Required to perform work in cramped spaces and/or high placesDisclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-HCT LI-JH1 #HOLTCAT #CAT #CATERPILLAR #PAVINGEQUIPMENT #PAVERS #ASPHALTPAVERS #CONCRETEPAVERS