Trabajos math en Cicero, New YorkCrear alertas

What you’ll need to succeed as a Forklift Operator at XPO Minimum qualifications: • Be at least 18 years of age, • Able to do basic math calculations, with and without a calculator, • Available to work a variety of shifts due to varying freight volumes, including days, evenings, nights and weekends Preferred qualifications: • Dock or warehouse experience in the transportation industry, • Forklift experience in a freight or less-than-truckload (LTL) environment, • Experience loading and unloading trailers, • Strong attention to detail and desire to succeed About the Forklift Operator job Pay, benefits and more: • Expected pay range: $22.53 to $27.70 per hour. Pay is on an annual step progression. Actual compensation may vary due to factors such as experience and skill set, • Competitive and comprehensive benefits options available for those scheduled to work 30 hours or more/week, • This is a Motor Carrier Act Exempt position What you’ll do on a typical day: • Efficiently sort, handle, load and unload palletized and non-palletized freight, • Use appropriate motorized and manual equipment, including pallet jack and forklift, • Secure freight inside trailers using appropriate tools and supplies, • Work in a safe, efficient manner, adhering to company safety policies, • Use mobile handheld devices to scan and track shipments, • Work on a dock that is not climate-controlled for extended periods Forklift Operators are required to: • Lift freight and other objects of various shapes, sizes and weights (frequently up to 50 lbs. and occasionally greater than 70 lbs.), • Safely walk and stand for extended periods on a loading dock that is not climate-controlled and may be slippery, • Reach (including above your head), bend, climb, push, pull, twist, squat and kneel as necessary About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you’re looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement ___. PandoLogic. Category:Transportation, Keywords:Forklift Operator, Location:East Syracuse, NY-13057

Safety-Kleen in Syracuse, NY is seeking a Sales and Service Route Driver Trainee (Driver Class B Trainee). This role will train to drive a Class B box truck to provide onsite service for parts washer machines, pick up containerized hazardous waste, and sell products/services in a defined route. Safety-Kleen will pay for you to obtain your CDL. Safety-Kleen, a subsidiary of Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors? • Health and Safety is our #1 priority and we live it 3-6-5!, • Focus on maintaining sustainability and cleaning the Earth, • Recruiting Pay range $23.00- $24.50, • Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match, • Own part of the company with our Employee Stock Purchase Plan, • Opportunities for growth and development for all the stages of your career, • Ensure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner, • Complete daily scheduled services, deliveries, and pickups in a timely manner, • Switch out 15- & 30-gallon drums of solutions at customer locations, • Completes all required documentation and labeling, • Generates / collects leads from customers for new products and services, • Sells additional products and services into existing accounts, • Follow all local, state (provincial) and federal compliance regulations and rules, • Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements, • Safely observe all corporate operating guidelines and procedures, • Observe all company environmental health and safety operating guidelines, • Obtain a CDL B within 180 days of employment (company paid), • Obtain Hazmat and Tanker endorsement within 30 days of CDL B, • Ability to work independently while managing time and productivity, • Basic computer and math skills, • Good written and verbal communication skills, • Problem solving skills, • Perform physical functions per job requirements, • Successfully complete a background check, drug test, and physical, by positionPreferred Qualifications:, • Strong customer service skills

About In the Navy, information technology (IT) plays an important role in everything from electronic mail systems, to shipboard control systems, to Special Intelligence (SI) systems. Navy Information System Technicians (IT specialists) are Enlisted Sailors who engage in a broad range of responsibilities, including network administration, database management and computer hardware and software implementation. Their responsibilities include: Operating and maintaining Navy global satellite telecommunications systems Serving as admin on mainframe computers and local and wide area networks Implementing micro-computer systems throughout the Fleet Serving as an important part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries and developing unmatched knowledge of the battlespace during wartime Qualifications and Requirements A high school diploma or equivalent is required to become an Enlisted Sailor in the IT field in the Navy. Those seeking an Information Systems Technician position must be U.S. citizens who can meet eligibility requirements for a Top Secret/Sensitive Compartmented Information security clearance. You should have a good working aptitude of math, an understanding of modern computing devices and the capability to do highly detail-oriented work. General qualifications may vary depending upon whether you’re currently serving, whether you’ve served before or whether you’ve never served before. Learn more about life in the Navy at

Job DescriptionDescription: Perform various types of welding operations and weld a variety of standard and Customized product weldments from prefabricated sheet metal components. BENEFITS: • Health Insurance, • Life Insurance, • Flexible Spending Account, • 401K, • 401K Matching, • 40 hours PTO, • 11 Paid Holidays ESSENTIAL JOB FUNCTIONS: • Perform welding operations based on interpreting shop records and drawings and assemble and measurement details., • Work from shop drawings and sketches to set up workstation for specific jobs., • Manipulate welding gun and lay proper fill or bead to meet and satisfy pressure testing requirements., • Follow quality control standards to ensure meeting quality and quantity requirements., • Obtain first piece inspection approval and periodically visually inspect and/or gauge work for quality appearance and dimensional accuracies., • Perform grinding operations to dress the appearance of weldments., • To maintain continuous movement of work, use hand truck, lift truck, lift hoist or overhead crane to move material to and from storage, staging areas, or workstation., • Perform daily lift truck inspections, • Read and accurately interpret measuring devices, • Act as authorized employee for the lock out / tag out program, • Adhere to established safety rules and policies., • Perform other duties as assigned.Requirements:, • High school diploma or general education degree (GED) and 3 years work experience., • Meet production quantity requirements., • Possess and demonstrate positive mentoring and leadership qualities., • Good oral and written communication skills., • Successful participation in training events (ie; Lockout/Tagout; HazCom; and overhead crane training), • Treat all co-workers with dignity and respect., • Possess basic math skills., • Possess basic organizational skills.

Our client, a nationwide manufacturer of precision metals and plastics components, has an immediate need for an experienced CNC Machinist, to join our winning team in East Syracuse. Our candidate of choice will be responsible for producing machined parts by setting up and operating a computer numerical control (CNC) milling machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. KEY RESPONSIBILITIES: Using blueprint or process sheet, set up jobs and operate one or more of a variety of multi axis CNC milling machines/tools. Obtains first piece approval from quality inspection. At specified frequencies, uses a variety of hand inspection tools to compare part dimensions with blueprint or process and record data. Diagnoses, analyzes and troubleshoots problems. Monitor tooling for wear and breakage and replace as necessary. Monitors tooling for wear and breakage and replaces it as necessary. Verify counts with job traveler documentation and complete the required reports and records. Plans machining by studying work orders, blueprints, materials, specifications, reference planes, locations of surfaces, and machining parameters etc.; interpreting geometric dimensions and tolerances (GD&T). Enters instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Sets-up mills by installing and adjusting tooling and attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices etc. Loads feed mechanism by lifting stock into position. Verifies settings by measuring positions, first-run part, and sample workpieces; adhering to international standards. Maintains specifications by observing milling, taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes. Maintains safe operations by adhering to safety procedures and regulations. Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs. Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs. Documents actions by completing production and quality logs. Updates job knowledge by participating in educational opportunities; reading technical publications. Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. Trains CNC Machinist employees as needed. Adheres to all safety policies and practices, consistently uses personal protective equipment, and practices good housekeeping. Maintains regular on-time attendance and adheres to company policies, procedures, and standards of conduct. Applies classroom and on the job post training information, knowledge, skills, and abilities consistently in a quality-oriented manner (wherein the KSAs are part of the jobs tasks, duties and other tasks as requested). Performs other tasks as directed including deburring parts and performing other operations during cycle. KEY REQUIREMENTS: Technical, BOCES, or high school graduate with two (2) years’ experience in set-up and operation of CNC vertical and horizontal machine centers or equivalent. Ability to read prints, diagram, and use micrometer, verniers, calipers, and gauges. Strong attention to detail. Please apply today to be one of the first people considered for this position! Elgen Staffing is the fastest growing staffing agency in New Jersey. With a deep understanding of today's hiring trends and technologies we have the ability to leverage the most effective recruiting methods to find the best candidates across numerous markets and industries and place them into the appropriate position successfully. Please allow us to help you find your dream job today!

⚡Join Our Growing Team as an Industrial Electrician at Superior Metals Manufacturing!⚡ Job Summary: Are you looking for your next challenge? Join us as an Industrial Electrician and become an intricate part of our success. In this dynamic role, you’ll tackle exciting challenges by inspecting, maintaining, and troubleshooting high-voltage systems and production equipment. With your electrical expertise and hands-on skills, you'll ensure everything runs smoothly and safely. You'll work with cutting-edge technology and engage in innovative electronic system development—all while being part of a fast-growing company. If you love solving problems and thrive in a fast-paced environment, this is the perfect opportunity for you! Essential Job Functions: • Inspect, maintain, and repair our plant-wide production equipment to keep everything running smoothly., • Work hands-on with 480V 3-phase electrical power distribution systems—let’s keep the lights on!, • Apply your electrical theory knowledge and troubleshooting to tackle any issues that arise., • Dive into machine instrumentation and electrical controls, keeping our systems sharp and efficient., • Handle high voltage systems and equipment like a pro., • Get acquainted with hydraulic and pneumatic systems—your toolbox just got a little bigger!, • Utilize PLC controls and Ladder Logic Programming to enhance our automation processes., • Read and interpret electrical and hydraulic schematics and plant drawings like a map to success., • Assemble, install, test, and maintain electrical and electronic fixtures using your trusty hand and power tools., • Perform preventative maintenance tasks to keep our production equipment in top shape., • Diagnose malfunctioning systems with your keen troubleshooting skills and test equipment., • Ensure safety and continuity in our electrical systems using ohmmeters and voltmeters., • Inspect electrical systems for hazards and compliance—safety first!, • Engage in the exciting world of electronic system development, including the design and repair of controllers, timers, drives, and switches., • Education: High school diploma or GED., • Experience: 5+ years in industrial maintenance/electrical experience., • Certifications: Electrical training or certification preferred; NFPA Certified Electrical Safety Technician (NFPA 70E) is a plus., • Skills: HVAC knowledge, robotic experience, and familiarity with computer networks are preferred., • Language Skills: Ability to read and interpret safety rules, operating instructions, and maintenance manuals, as well as communicate effectively with colleagues and vendors., • Mathematical Skills: Proficient in basic math operations—adding, subtracting, and working with fractions and decimals., • Reasoning Ability: Capable of solving practical problems and interpreting various types of instructions., • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $25 - $45 per hour, with potential to make more based on your experience, education and shift. We also have available overtime., • New Facility: Work in our brand-new, cutting-edge manufacturing environment. SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM. #IndustrialElectrician #ElectricianJobs #Innovation #VETS #Manufacturing #Millwright This is a non-management position This is a full time position

Job Description Job Title: Clinical Laboratory Technologist Reports to: Lab Supervisor FLSA Status: Exempt Summary: CNY Fertility is a renowned fertility center offering advanced treatments like IVF, IUI, and egg freezing. With a patient-centered approach and cutting-edge technology, we support individuals and couples on their journey to parenthood. The Clinical Laboratory Technologist performs all assigned laboratory testing and reporting procedures in accordance with regulatory and organizational standards. Required Duties and Responsibilities: Include the following. Other duties may be assigned. • Performs laboratory testing to include endocrinology assays, urinalysis, semen analysis, semen cryopreservation and semen wash., • Performs required quality control, quality assurance and proficiency testing., • Maintains stock of necessary equipment, supplies, liquid nitrogen dewars, samples and other materials throughout the work area., • Routine maintenance, calibration and validation are performed as required. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: Bachelor’s degree (B.A. or B.S.) in Medical Technology or equivalent from four-year college or university; ASCP certification preferred. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Math Ability: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentage and to draw and interpret bar graphs. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. The ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Knowledge, Skills and Other Abilities: • Excellent oral and written communication skills., • Excellent computer literacy., • Ability to multitask in fast paced environments. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. There is some risk of exposure of bodily fluids or contagious diseases. Weekend and holiday rotation is required. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands; reach with hands and arms and talk or hear. The employee is occasionally required to sit. Benefits include: · 401(k) · Dental insurance · Vision Insurance · Health Insurance · Life Insurance · Flexible spending account · Paid time off · Maternity Leave

Job DescriptionDescription: SANY is excited to announce the opening of Math Intervention Support Teacher (Grades 6-10) for Citizenship and Science Academy Syracuse Jr./Sr. High School for the 2025-2026 academic year. We need Teachers who will: • Provide engaging lesson plans that conform to the charter's curriculum; which is designed to meet the state's core educational standards., • Possess a strong understanding of Common Core standards and state learning standards., • Have the ability to modify/redesign/develop curriculum as needed., • Collaborate with staff to determine the charter's requirement for the instructional goals, objectives, and methods., • Be ready to prepare students for the standardized tests relevant to the content area., • Have excellent content knowledge and pedagogy., • Welcome the use of analytics and data to help drive instruction and promote learning, • Appreciate regular feedback, accountability, and the rewards that come with doing a great job serving our students & communities., • Excellent benefits package including medical, dental, vision, long-term disability, employee assistance program, and more!, • Enrollment in the NYS Teacher Retirement System (TRS) or 403b employer match, • Tuition Reimbursement, • Competitive salary, • Professional development opportunities. Coaches and mentors in every building!, • Regular use and integration of technology in our classrooms and throughout our school, including IPADs, Chromebooks, internet, and apps Requirements: Qualifications: Bachelor’s degree required; Master's degree preferred NYS Certified Required Experience with a diverse population of students or in an urban setting a plus Prior teaching experience preferred and novice teachers encouraged to apply! Fingerprint clearance through NYS Department of Education Competencies: • Growth mindset, flexible and okay with change, • Intrinsically motivated, • Compassionate, • A strong conviction that all students can succeed, • The ability to take feedback well and immediately implement Syracuse region Youtube: Utica region Youtube: Syracuse region Facebook: Utica region Facebook: Equal Opportunity Employer Science Academies of New York is committed to maintaining a working and learning environment free from discrimination on the basis of race, color, religion, national origin, pregnancy, gender identity, sexual orientation, marital/civil union status, ancestry, place of birth, age, citizenship status, veteran status, political affiliation, genetic information or disability, as defined and required by state and federal laws. Additionally, we prohibit retaliation against individuals who oppose such discrimination and harassment or those who participate in an equal opportunity investigation.

Job DescriptionDescription:Substitute Teacher (Per Diem) Part Time Syracuse, NY Description SANY's Citizenship and Science Academy of Syracuse Junior-Senior High School is excited to announce the opening of a Substitute Teacher for the 2025-2026 academic year. We have a great environment for new teachers and encourage experienced teachers to apply! New York State Certification preferred! As a Substitute Teacher, you will: • Assist with preparation and instruction, • Work closely with small groups of students and provide intervention, • Actively participate in weekly meetings and attend all school-wide events, • Implement classroom policies and procedures, • Lead students to and from specials/lunch, • Effectively manage student behavior Qualifications: • Bachelor’s degree required, • Certification preferred but not required. Certification in ELA and Math a plus, • Experience with a diverse population of students or in an urban setting a plus, • Prior teaching experience is preferred and novice teachers encouraged to apply!, • Growth mindset, flexible and ok with change, • Intrinsically motivated, • Compassionate, • Strong conviction that all students can succeed, • The ability to take feedback well and immediately implement The compensation for a substitute teacher is $160 per diem. Want to learn more about our district? Be sure to check out the following links to get a closer look at our schools, hear from our parents and see what our state and community leaders are saying about SANY. District Website: Syracuse region Youtube: Utica region Youtube: Syracuse region Facebook: Utica region Facebook: Equal Opportunity Employer Science Academies of New York is committed to maintaining a working and learning environment free from discrimination on the basis of race, color, religion, national origin, pregnancy, gender identity, sexual orientation, marital/civil union status, ancestry, place of birth, age, citizenship status, veteran status, political affiliation, genetic information or disability, as defined and required by state and federal laws. Additionally, we prohibit retaliation against individuals who oppose such discrimination and harassment or those who participate in an equal opportunity investigation. Requirements:

Job Description1st Shift Pattern MakerHours: 6am-2:30 Days: Monday - Friday Pay: 15-25 per hour depending on experience Staffworks is seeking a reliable Pattern Maker to join their award-winning team! What's in it for you?Great Starting RateWeekly PayTemp to Hire Opportunity Pattern Maker Details: • Lays out and constructs complex models and molds using blueprints, master patterns and stereo models to build molds, rubber resin tooling, determine joints and parting, add draft filets and radii, etc., • Plans sequence of operations, • Using three axis CAM software, interprets files, programs CNC machines and prep CAD files, • Sets up and operates a wide variety of machinery such as lathes, drills, milling machines, CNC machines, etc. as required, • Grinds, files and sands parts for assembly of a smooth and finished cavity, • Rigs molds as required, • Builds fixtures and templates, • Monitors tooling for wear and breakage and replaces as necessary., • Performs routine machine maintenance., • Adds stock to models to allow for machining tolerances, • Coaches and trains employees as requested, • Meets quality and quantity standards for the position., • Proactively supports the ISO process approach to quality management and the Syteline MIS system. Pattern Maker Qualifications: * High school diploma or equivalent or Trade School graduate with training in shop math, blueprint reading and machine set-up * Completion of a Pattern Maker apprenticeship * Five (5) years of experience * Must be able to lift up to and including 35 pounds as needed. We are an Equal Opportunity Employer and celebrate diversity at all levels of our organization.How to Apply: (315) 455-9675

Job DescriptionCNC Machine OperatorPay: $19.00-$21.00/hour depending on experienceHours: 6:30am - 3:00pm Staffworks is seeking a reliable CNC Machine Operator to join their award-winning team! What's in it for you? • Temp to Hire, • NY State Sick Pay, • Operate five CNC lathes working from written program, • Perform selected setup operations, adjust and complete tooling repairs, • 2+ years’ work experience in a Machining Department within a Manufacturing setting, • Previous experience in CNC department, • Basic math skills, including ability to use micrometers and other measuring devices, • Ability to read and interpret drawings

Job DescriptionDescription: Set up and operate various types of saws horizontal and vertical lathes, saws and drill press equipment and perform various turning, drilling, taping, and boring operations on a variety of carbon and alloy steel plate for forging and stamping parts. BENEFITS: • Health Insurance, • Life Insurance, • 40 Hours Sick Time, • 40 Hours PTO, • 401K, • 401K Matching, • 11 Paid Holidays, • Up to $700.00 reimbursement for Dental and Vision claims for employee. ESSENTIAL JOB DUTIES: • Author new programs and access and run existing programs and edit as necessary., • Aid tool room with tooling and fixtures for shop as needed., • Work with tooling vendors to assess tools and make recommendations, • Work from operational orders and/or parts drawings and make necessary tool, speed and feed changes to accommodate varying size and configuration of parts., • Read and interpret measuring devices, • Set up and operate turret/chucking lathes and turn/bore various size diameters and holes, • Set up and operate single and multiple spindles and radial drill press, and drill, tap, bore, and counter bore through and blind holes, • Diagnose problems encountered in making set ups and running production to determine corrective action, • Obtain first piece inspection approval and periodically visually inspect and/or gauge work for quality appearance and dimensional accuracy, • Follow quality control standards to ensure meeting quality and quantity requirements, • Maintain coolant, oils and hydraulic fluids, and monitor performance as instructed, • Monitor wear of consumable tools and notify supervisor as required, • Follow quality control standards to ensure meeting quality and quantity requirements, • Accurately report work performed, • Keep work area neat and orderly and follow all safe work practice requirements, • Maintain identification of all parts and materials and record location of same, • Report abnormal machine operating conditions immediately, • Perform daily forklift inspections, • High school diploma or general education degree (GED) required and 3 years CNC experience strongly desired., • Must be able to successfully operate an overhead crane, • Possess and practice good oral and written communication skills., • Treat fellow co-workers with dignity and respect., • Possess and utilize basic math skills and exercise superior organizational skills, • Prior CNC, production machine and/or welding experience highly desired., • Maintain and exhibit a positive attitude toward our work and our work environment., • Demonstrated experience with hand and power tools, banders, hoists, and other production equipment, as well as an overall mechanical aptitude, • Forklift certification required. Basic personal computer skills that include the ability to send/receive e-mail messages. May be required to operate Computer, Email, Microsoft Excel, Printer, Copier, Fax Machine, Telephone, Scanner, and calculator, micrometers and gages, power tools, hand tools, forklifts and pallet jacks. PHYSICAL ACTIVITIES AND DEMANDS: Moderate Lifting: Exerting up to 20 pounds of force frequently and/or up to 50 pounds of force occasionally and/or a negligible amount of force frequently to move objects. MENTAL AND VISUAL DEMAND: Close mental and visual attention to prepare and analyze data and figures, work on a computer, read, or control machines or processes at a rapid pace that requires close coordination and fine adjustment. Moderate mental and visual attention to perform manual work, machine operations, set-ups, inspections, and adjustments that require frequent decisions to detect and adjust for variance from proper operation. ENVIRONMENTAL CONDITIONS: Work Environment: Work in production area exposed to seasonal temperatures, both high and low. Occupational Hazards: Proximity to moving mechanical parts, moving vehicles, electrical current, welding flash and exposure to potential injury without safe work practices and appropriate personal protective Equipment (PPE). Safety Equipment: May wear a variety of PPE, including safety glasses with side shields, safety shoes and other required PPE in accordance with working tasks. PPE may include gloves and hearing protection when performing certain functions. EMPLOYER'S DISCLAIMER: • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. Furthermore, the company reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Job DescriptionDescription: Building Substitute Full-time Syracuse, NY Description SANY's Citizenship and Science Academy of Syracuse Junior-Senior High School is excited to announce the opening of a Building Substitute Teacher for the 2024-2025 academic year. We have a great environment for new teachers and encourage experienced teachers to apply! New York State Certification preferred! As a Building Substitute, you will: • Assist with preparation and instruction, • Work closely with small groups of students and provide intervention, • Actively participate in weekly meetings and attend all school-wide events, • Implement classroom policies and procedures, • Lead students to and from specials/lunch, • Effectively manage student behavior Qualifications: • Bachelor’s degree required, • Certification preferred but not required. Certification in ELA and Math a plus, • Experience with a diverse population of students or in an urban setting a plus, • Prior teaching experience is preferred and novice teachers encouraged to apply!, • Growth mindset, flexible and ok with change, • Intrinsically motivated, • Compassionate, • Strong conviction that all students can succeed, • The ability to take feedback well and immediately implement The compensation for an on-call substitute teacher is $160 per diem. Want to learn more about our district? Be sure to check out the following links to get a closer look at our schools, hear from our parents and see what our state and community leaders are saying about SANY. District Website: Syracuse region Youtube: Utica region Youtube: Syracuse region Facebook: Utica region Facebook: Equal Opportunity Employer Science Academies of New York is committed to maintaining a working and learning environment free from discrimination on the basis of race, color, religion, national origin, pregnancy, gender identity, sexual orientation, marital/civil union status, ancestry, place of birth, age, citizenship status, veteran status, political affiliation, genetic information or disability, as defined and required by state and federal laws. Additionally, we prohibit retaliation against individuals who oppose such discrimination and harassment or those who participate in an equal opportunity investigation. Requirements:

Job Description Affinity Recruiting has an exciting opportunity for a 3rd shift Production Supervisor for a local distributor in the Syracuse, NY location! 55K – 65K per year (depending on experience) with some OT and this position has an amazing benefits package! Qualifications: • Coordinate and manage all production, housekeeping and support department activities, ensure proper and accurate paperwork, collect and/or distribute as needed, • Build people capabilities through effective employee relations, training, and communications, • Ensure compliance with all safety regulations, GMP's, OSHA, Company Policies and Procedures Company's mission statement, • Ensure compliance with Union contract and provide fair and consistent discipline., • Work in a fast paced, changing manufacturing environment, • Meet and/or exceed daily, monthly, and annual production requirements and standards Requirements: • Must have 3 years of Experience in supervision or leadership role, • Ability to work a flexible schedule - including occasional overtime/weekend work, • Previous experience in a high-speed manufacturing setting, • Excellent verbal and written communication, math, and computer skills, • Ability to lead/motivate team towards stated goals If you meet these requirements we encourage you to apply to this posting, with an updated resume, and a recruiter will reach out immediately!

Job Description Come join John W. Danforth Company, one of the largest mechanical contractors in the Northeast! We are an employee-owned company and believe our greatest asset is our people. We are looking for team members who are passionate about delivering industry-leading experiences to our customers and supplying turn-key solutions for any HVAC, refrigeration, critical environment, custom metal fabrication, energy performance, or specialty mechanical project. As a Service Coordinator, you will be responsible for providing outstanding customer service. This role focuses on three main areas: administrative and operational support, including scheduling, documentation, and customer communication; inventory and parts management, ensuring timely and accurate procurement, tracking, and parts processing; and service coordination, assisting field technicians and acting as a dispatch backup to ensure smooth service operations. Are you detail-oriented with strong problem-solving abilities? Do you possess strong critical thinking skills and a knack for customer service? If you are ready to make a tangible difference, we invite you to join our team as a Service Coordinator! What We Offer: • Danforth invests in you and your future with directed employee engagement, team support, career development, and mentoring., • We are a professional organization offering quality benefits, including:, • Medical, dental, disability, and life insurance, • 401(k) and ESOP with generous profit-sharing/matching contributions, • Collaborate effectively with the Service Team to streamline operations and enhance service delivery., • Deliver an outstanding customer experience in the service department by building strong relationships and communicating in a friendly yet professional manner with customers and internal teams., • Keep stakeholders informed about schedules, challenges, and essential updates to foster trust and engagement., • Manage purchasing, tracking, and following up on parts to ensure on-time delivery for all scheduled service work., • Coordinate vehicle and tool maintenance and repairs, ensuring that spare vehicles are available, and appointments are secured., • Associate’s degree in accounting or business preferred, • 2-3 years of billing experience as a billing clerk with strong math abilities and prior experience in service-related industry is preferred, • Detail-oriented and highly organized, with the ability to handle multiple tasks and assignments, • Excellent computer literacy with MS Office (Word, Excel, and Outlook) and knowledge of GP is an advantage, • Excellent customer service skills, including effective verbal and written communication, • Ability to work collaboratively with colleagues and staff to create results in a driven, team-oriented environment, • Must have the integrity, enthusiasm, and willingness to represent the company in the most professional, positive manner Danforth offers a competitive benefits package for eligible employees, including medical, dental, vision, life, disability, paid time off, 401(k), with company match, and participation in our Employee Stock Ownership Plan (ESOP). The estimated compensation range for this role is $45,000-$55,000. This range is based on several factors, including individual education, qualifications, training, prior work experience, and work location. John W. Danforth Company is an equal opportunity employer and is committed to a workplace free from discrimination. All employees and applicants for employment will be considered without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionDescription: SANY's Syracuse Academy of Science Middle School is excited to announce the opening of a Full-Time Building Substitute for the 2025-2026 academic year. We have a great environment for new teachers and encourage experienced teachers to apply! As a Daily Substitute, you will: • Assist with preparation and instruction, • Work closely with small groups of students and provide intervention, • Actively participate in weekly meetings and attend all school-wide events, • Implement classroom policies and procedures, • Lead students to and from specials/lunch, • Effectively manage student behavior, • Minimum of a Bachelor’s degree, • Certification preferred but not required. Certification in ELA and Math a plus, • Experience with a diverse population of students or in an urban setting a plus, • Prior teaching experience preferred, and novice teachers encouraged to apply!, • Growth mindset, flexible, and ok with change, • Intrinsically motivated, • Compassionate, • Strong conviction that all students can succeed, • The ability to take feedback well and immediately implement District Website: Syracuse region YouTube: Utica region Youtube: Syracuse region Facebook: Utica region Facebook: Equal Opportunity Employer Science Academies of New York is committed to maintaining a working and learning environment free from discrimination based on race, color, religion, national origin, pregnancy, gender identity, sexual orientation, marital/civil union status, ancestry, place of birth, age, citizenship status, veteran status, political affiliation, genetic information or disability, as defined and required by state and federal laws. Additionally, we prohibit retaliation against individuals who oppose such discrimination and harassment or those who participate in an equal opportunity investigation.

Job Description alary Range:$18.00 To $25.00 Hourly 3rd shift - additional $3.50 shift differential DEPARTMENT: LABELS Iconex is the leading provider of solutions essential to daily commerce. We are the iconic inventor and continued leader in receipts, and we connect people and goods through superior labelling and tracking technology. Building upon our unique tradition of innovation, we are creating the next generation of business process improvements. Iconex is headquartered in Atlanta, Georgia, USA. POSITION SUMMARY & KEY AREAS OF RESPONSIBILITY: The Lead Press Operator is responsible for operating equipment to production standards, supporting production, and leading the daily work on a shift in accordance with the priorities of the business. The Lead Press Operator supports Shift Leadership in deployment of resources and assets to meet production needs. The Lead Press Operator will lead safety training, Continuous Improvement (CI) projects/tasks/events, development and deployment of training, and will support a team culture of high performance. At times the Lead Press Operator will fill in for gaps in Leadership coverage. RESPONSIBILITIES: Ensure compliance with all Environmental, Health and Safety (EHS) policies and procedures. Actively lead in EHS training, safety observations, hazard identification, and safety committees. Foster, develop and implement Continuous Improvement (CI) activities throughout production. Ensure a proactive approach to product quality, GMP’s, and quality of workmanship. Maintain a safe, clean, organized 6S program for production areas. Operate a coater, press, slitter, turret, or other finishing equipment. Assist or conduct product set-up/change-over, break coverage, packing, and material handling. Facilitate and support training, cross-training, and coworker development. Perform quality audits and sign offs of quality related paperwork. Support development & implementation of Standard Work including One Point Lessons, Standard Operating Procedures, Work Instructions, and Training Documents. Support and lead shift huddles, Gemba walks, and coworker communications. Deploy resources as needed to effectively maintain production schedule. Identify and communicate the status of upcoming orders/schedule modifications. Allocate and adjust resources to minimize equipment downtime. Support inventory cycle counts. Ensure accurate consumption and inventory of production materials including boxes, cores, paper, chemicals, and other raw materials. Assist maintenance staff on equipment with PM/repairs/projects when needed. Interface with key vendors on technical matters, CI ideas, and changes to components. Support new job review to onboard new business. Contributes to a team effort by proactively assisting coworkers. Interfaces with other departments including maintenance, planning, HR, quality, R&D, and other leaders. Attend training programs to develop relevant knowledge, techniques, and skills. Ensure an environment that promotes effective communications, positive coworker collaboration, and teamwork. Other duties as assigned. REQUIRED SKILLS/RESPONSIBILITIES: Basics of computer applications (e.g., Microsoft Office Suite, Microsoft Outlook, ERPs, WMS) Lean Manufacturing, Six Sigma or related CI experience preferred Basic math skills include addition, subtraction, multiplication, division and the ability to compute rate, ratio, and percent. Ability to read and comprehend instructions, diagrams, training manuals, and product specifications Effective verbal and written communication skills including ability to effectively train others Able to exhibit a ‘can-do” approach and empower others to excel Ability to show a positive attitude and respectful behavior and work cooperatively with all coworkers Ability to support plant activities including material, manufacturing, and communication flow throughout the facility Must be able to lift up to 50 lbs. Must be able to stand/walk frequently as well as bending, squatting, stooping, leaning, pushing/pulling and reaching near equipment. BASIC QUALIFICATIONS: High School Diploma or GED Machine operator experience in Printing/Packaging/Coating/Laminating/Extrusion industry preferred Leadership experience preferred such as basic manufacturing projects, trainer, CI, interim leadership roles, safety lead, safety committee coordinator etc. Ability to work extended hours as required EEO Statement Iconex enthusiastically engages with our communities of employees and customers every day. Iconex values diversity throughout the organization, not only because it is inherently the right thing to do, but also because we believe diversity gives greater perspective and insight to the world we live in and the customers we serve. Iconex is committed to being a globally inclusive company where all people are treated fairly, respected for their individuality, promoted based on performance and encouraged to maximize their full potential. We believe in understanding and embracing differences among all people. This concept encompasses, but is not limited to, differences with regard to race, ethnicity, religion, gender, culture and physical ability. Every individual at Iconex has an ongoing responsibility to respect and support a globally diverse environment.

Job DescriptionDescription: SANY is excited to announce the immediate opening of an Academic Intervention Support position for the 2025-2026 Academic Year! We are looking for dynamic, collaborative, flexible and engaging educators. We have a great environment for new teachers and encourage experienced teachers to apply! New York State Certification is required. We need Teachers who will: • Be flexible with content and prepared to support students with math in various grade levels, • Possess strong understanding of Common Core standards and state learning standards, • Have the ability to modify/redesign/develop curriculum as needed, • Collaborate with staff to determine charter's requirement for the instructional goals, objectives, and methods, • Be ready to prepare students for the standardized tests relevant to the content area, • Have excellent content knowledge and pedagogy, • Use of analytics and data to help drive instruction and promote learning, • Appreciate regular feedback, accountability and the rewards that come with doing a great job serving our students & communities, • Excellent benefits package including medical, dental, vision, long-term disability, employee assistance program and more!, • Enrollment in the NYS Teacher Retirement System (TRS) or 403b employer match, • Tuition Reimbursement, • Competitive salary, • Professional development opportunities. Coaches and mentors in every building!, • Regular use and integration of technology in our classrooms and throughout our school, including IPADs, Chromebooks, internet, and apps Requirements: Qualifications: • Bachelor’s degree required; Master's degree preferred, • Certification required, • Experience with a diverse population of students or in an urban setting, • Growth-mindset, flexible and okay with change, • Intrinsically motivated, • Compassionate, • Strong conviction that all students can succeed, • The ability to take feedback well and immediately implement

Job Description At Atlantic Testing Laboratories (ATL), we offer a dynamic career that blends fieldwork with office assignments. With 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. We're seeking experienced Construction Special Inspectors to join our team! As a Construction Special Inspector, you'll have the opportunity for professional growth and advancement with competitive pay. Construction Special Inspector Perks & Benefits: • Competitive Health Insurance, • Paid training and certification with cash bonuses for successful completion, • Advancement career and opportunity planning, • Variety in daily work assignments, • Paid Vacations/Sick/Personal/Holidays, • Safety training and equipment provided, • Desire any of the following certifications with related experience: ACI, ICC, PCI, CWI, NETTCP, NYSDOT DTI, NYSDOT PCC, NYSDOT QC/QA and NICET, • Able to lift, carry, push, and pull equipment weighing up to 50 pounds, • Basic math and good communication skills, • Possession of a valid New York State driver’s license, • Positive attitude, with ability to work independently and in a team environment, • Provide Special Inspection services in accordance with the Building Code of NYS, • Perform quality sampling, testing and inspection of soil, concrete, masonry, and asphalt materials on construction sites and in laboratory settings, • Follow safety standards and procedures, • Prepare accurate test and inspection reports using electronic report templates, • Effectively communicate with clients and other project stakeholdersATL is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, national origin, sex, sexual orientation, gender identity, genetic characteristics, disability, military status, protected veteran status, and any other basis protected by applicable local, state, or federal law or Executive Orders.

Job Description Job Title: SART Data Entry Analyst Reports to: SART Manager FLSA Status: Non-Exempt Summary: CNY Fertility is a leading provider of affordable and accessible fertility care, committed to helping individuals and couples achieve their dreams of parenthood. We are passionate about patient-centered care and innovative treatment options. The SART Data specialist performs entry-level duties with a focus on performing data entry across a range of patient-related topics. Duties and Responsibilities: Include the following. Other duties may be assigned. • Prepares initial data for SART & NASS on all patient and cycle information., • Reports to SART & NASS online any patient cycles., • Performs data entry via the SART & NASS website., • Reports online as patient cycle progresses., • Consults with nursing staff about test results for necessary documentation., • Maintains excel file of cycle progression., • Communicates with patients about pregnancy results and documents them to be reported to the offices, and SART & NASS., • Finalizes all reports to SART & NASS after all births for previous year are completed. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High school diploma or general education degree (GED); experience with data entry a plus. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Math Ability: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Knowledge, Skills and Other Abilities: • Demonstrates necessary computer skills., • Ability to work productively in a fast-paced environment., • Ability to work independently and with a team., • Excellent customer service skills when speaking to patients., • Computer literacy Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands; reach with hands and arms and talk or hear. The employee is occasionally required to sit. Benefits include: · 401(k) · Dental insurance · Vision Insurance · Health Insurance · Life Insurance · Flexible spending account · Paid time off · Maternity Leave

Job Description CABVI is seeking a Warehouse Worker to perform a variety of warehouse tasks including picking and filling orders from stock, staging, loading, and unloading finished and raw materials. This position will utilize scan gun hardware and shipping software to complete tasks, as well as operation of motorized warehouse material handling equipment. FOUR/TEN-HOUR DAYS OFFERED RESPONSIBILITIES INCLUDE: • Carefully reads the complete customer generated product pick ticket to identify products needed for selection – noting unit of measure, quantity, special shipping instructions, etc., • Accurately and in accordance with documented procedures, selects product from inventory using a scan gun device and completes appropriate paperwork accurately and legibly., • Operates FedEx and UPS shipping computers to process shipping product and produce shipping labels., • Prepares finished product for shipping by stacking according to customer requirements, applying appropriate labels and shrink wrapping pallets., • Loads & unloads trucks and containers by hand, with pallet jacks and/or forklifts., • Uses warehouse equipment properly, completes daily logs and notifies warehouse management of any equipment issues., • Participates in inventory cycle counts as needed in accordance to company policy to ensure inventory accuracy., • Maintains a clean, orderly, efficient and safe warehousing environment., • Minimizes damaged product. Repacks and reboxes as necessary., • High school diploma or GED required. Solid work history that demonstrates reliability. One year of warehouse experience required, • Must have good listening skills and ability to communication well both written and verbally., • Strong computer and math skills needed for accuracy in picking orders and maintenance of inventory., • Frequently requires the ability to lift, sort & stack cartons weighing up to 50 lbs. and stand for long periods. Benefits: CABVI offers a generous benefit package along with a family friendly work environment. We offer three health insurance plans to choose from along with dental and vision insurance. A retirement benefit through a 403(b) is offered to include employee and employer contributions. We also have paid time off, paid holidays, a fitness center available to CABVI employees, employer sponsored life insurance along with many other employee sponsored benefits. CABVI is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Protected veterans and individuals with disabilities are encouraged to apply. Company DescriptionThe Central Association for the Blind and Visually Impaired (CABVI) is a not-for-profit agency with professional and support staff who provide comprehensive vision rehabilitation programs annually to more than 2000 people who are blind and visually impaired in a nine-county area. We teach independent living skills, as well as orientation and mobility, and we offer low vision services, children’s services, and continually-expanding technology and employment programs. One facet of our employment services is Central Industries, the Association’s manufacturing division that helps support agency services. Our mission is to assist people who are blind or visually impaired achieve their highest levels of independence.The Central Association for the Blind and Visually Impaired (CABVI) is a not-for-profit agency with professional and support staff who provide comprehensive vision rehabilitation programs annually to more than 2000 people who are blind and visually impaired in a nine-county area. We teach independent living skills, as well as orientation and mobility, and we offer low vision services, children’s services, and continually-expanding technology and employment programs. One facet of our employment services is Central Industries, the Association’s manufacturing division that helps support agency services. Our mission is to assist people who are blind or visually impaired achieve their highest levels of independence.

Job DescriptionBenefits: • Unlimited compensation, • Expanding territory with huge growth opportunity, • Compensation directly tied to performance, • Flexible schedule, • Comprehensive sales training to hone your sales skills and techniques., • Flexibility in scheduling to accommodate your personal commitments., • Performance-based pay and enticing bonuses to reward your sales success., • Dynamic team culture with engaging events to celebrate achievements and foster connections. Responsibilities • Travel to and from company-generated and pre-scheduled leads/appointments at the customers home., • Build rapport with customers through active listening, a positive demeanor and attention to the homes needs., • Conduct product demonstrations and deliver custom quotes in the customers home., • Answer client questions about products, prices, installation process, financing availability/terms, and close the sale on the first appointment., • Measure for products and process all contract documents for the sale, including a detailed scope of work and materials needed., • Work with customer service specialist to uphold the highest customer service standards., • Prospect and contact potential customers.Qualifications, • Sales Experience preferred but not required, • Ability to at least lift 25 pounds, • Drivers license and reliable transportation, • Communication/people skills with willingness to make consistent follow-up with customers, • Self-motivated, goal oriented, and persistent

Job Description Job Description Isaac Heating & Air Conditioning is seeking a reliable Commercial HVAC Installer for their Syracuse, NY location. The ideal candidate will be eager to learn, develop, and understand the skills required to be an efficient and effective commercial installer. This position would be ideal for a positive, hands on go- getter who is open to learn and wants to advance in their trade and within the company. Summary: For over 75 years, Isaac Heating and Air Conditioning has worked diligently to meet the changing heating and air conditioning needs of homeowners and businesses in Upstate and Central New York. Isaac is one of the nation's largest privately held HVAC/R contractors and services over 35,000 clients a year. Creating an enjoyable experience met with anticipation results in an environment where our team, clients, and community can comfortably grow, prosper, succeed, and improve their quality of life. Isaac partners with leading HVAC and plumbing companies throughout the United States, providing the support and resources of a large national company. Responsibilities • Perform installation of commercial HVAC, boiler piping, and refrigeration equipment, • Develop basic knowledge of commercial and mechanical piping and ductwork., • Responsible for installation of ductwork and materials, • Safely operate hand tools, power tools, generators and other equipment as required by the job. Job qualifications • High School diploma or equivalent required, • Minimum 2-5 years of Commercial HVAC experience preferred, • EPA Universal and OSHA 10-hour Certificate preferred, • Valid drivers license with acceptable driving record, • Basic math skills Competencies • Excellent written, verbal and active listening skills, • Exceptional customer service skills, • Technical knowledge, • Strong organizational skills, • Ability to work individually and as part of a team, • Customer focused, • Problem solving skills The starting hourly base wage for this position is $23-32 per hour. This is the range of the base pay only, it does not include other components that make up the total compensation package of the position. If offered a position, your total compensation package will be determined by experience, location, skills, and/or education which may result in a total compensation package that falls outside of the provided range. Isaac Heating & Air Conditioning (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy, or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law.

Job Description Job Description Isaac Heating & Air Conditioning is seeking an experienced Commercial HVAC Install Lead for their Syracuse, NY location. The ideal candidate will be eager to learn, develop, and understand the skills required to be an efficient and effective commercial installation lead. Summary: For over 75 years, Isaac Heating and Air Conditioning has worked diligently to meet the changing heating and air conditioning needs of homeowners and businesses in Upstate and Central New York. Isaac is one of the nation's largest privately held HVAC/R contractors and services over 35,000 clients a year. Creating an enjoyable experience met with anticipation results in an environment where our team, clients, and community can comfortably grow, prosper, succeed, and improve their quality of life. Isaac partners with leading HVAC and plumbing companies throughout the United States, providing the support and resources of a large national company. Responsibilities • Partner with field supervisors, project managers, and team members to lead commercial HVAC projects, • Perform installation of commercial HVAC, boiler piping, and refrigeration equipment, • Develop basic knowledge of commercial and mechanical piping and ductwork, • Responsible for installation of ductwork and other related materials, • Safely operate hand tools, power tools, generators and other equipment as required by the job Job qualifications • High School diploma or equivalent required, • Minimum 5-10 years of Commercial HVAC experience preferred, • EPA Universal and OSHA 10-hour Certificate preferred, • Valid drivers license with acceptable driving record, • Basic math skills Competencies • Excellent written, verbal and active listening skills, • Exceptional customer service skills, • Technical knowledge, • Strong organizational skills, • Ability to work individually and as part of a team, • Customer focused, • Problem solving skills The starting hourly base wage for this position is $32-45 per hour. This is the range of the base pay only, it does not include other components that make up the total compensation package of the position. If offered a position, your total compensation package will be determined by experience, location, skills, and/or education which may result in a total compensation package that falls outside of the provided range. Isaac Heating & Air Conditioning (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy, or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law.

Job Description We are currently hiring Cooks to join our Food Services Team! Responsibilities: The primary purpose of this position is to prepare foods according to recipes and production tallies and in accordance with all food safety and sanitation regulations. This position works closely with the Executive Chef, as part of a team to provide nutritionally adequate meals to Residents and Patients of the facility. • Possesses knowledge of all Dining Services operations policies and procedures., • Prepares menu items for Resident meals using production sheets and recipes to maintain optimal nutritional adequacy., • Plates food including proper portion size and appealing presentation., • Follows all HACCP guidelines (which include sanitation and food safety)., • Uses cooking equipment properly (stove, steamer, grill, blender, buffalo chopper, floor mixer, soup kettles, brazier, etc), • Knowledge of basic cooking terms. (steam, bake, fry, broil, sauté), • Must have knowledge of basic cooking measurements (cup, quart, oz, teaspoon, tablespoon etc.), • Calibrates and uses a food thermometer correctly., • Takes the temperature of foods and records the temperature on the proper HACCP form., • Answers the phone and provides resident requests in a timely manner., • Knowledge of therapeutic diets including restrictions and consistency alterations., • Washes pots and pans using the 3-sink method as needed., • Minimum of 1 year cooking experience, • Basic English language and math skills, • Strong interpersonal skills, • No Mandated Shifts, • Daily Pay, • Generous PTO Structure for Full Time employees with no waiting period, • Health/Health Reimbursement Account/Dental/Vision Plans available, • Company Provided Life Insurance for Full Time employees, • Retirement Plans, • Tuition Reimbursement, • On the Centro Bus Line Our Mission: The Centers at St. Camillus is a non-denominational, not-for-profit organization dedicated to caring for life through a broad range of health care services. Our Vision: To be the provider of choice for compassionate and innovative care If you are interested in joining a team of professionals who are committed to providing high quality services in a caring environment, we want to hear from you! EOE/Affirmative Action Employer Visit our website at

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. Responsible for performing breakdown and preventative maintenance on production and supporting equipment. $5,000 SIGN-ON BONUS Current Openings • Carry out tasks issued by maintenance shift supervisor., • Troubleshoot support system problems using basic problem solving skills., • Perform preventative maintenance tasks on equipment assigned to you., • Complete all standard work orders and preventative maintenance tasks assigned. Submit all completed paperwork., • Record information in required logbooks for systems history and continuous improvement., • Record any parts/components used for repairs to ensure replenishment of On-Hand balances are maintained, and properly dispose of used parts/components., • Ensure quality standards set by the company are adhered to after PM’s and/or repairs are made to equipment., • Perform machine repairs based upon a maintenance call or an assignment in a timely fashion., • Maintain cleanliness of the areas you are working in; properly dispose the parts/components you have replaced., • Promote a safe and harmonious work environment with adherence to company policy, procedures, safety and health regulations., • Maintain compliance with S.Q.F. Certification., • Minimum of a GED or High School Diploma Must be a minimum of 18 years of age • Technical training or electrical/mechanical technician degree, or verifiable comparable experience, • Food manufacturing background is a plus, • Must be able to operate forklifts and pallet jacks (electric/manual), • Experience with programmable logic controller, instruments and controls is preferred, • Knowledge of how your assigned equipment operates, • Basic knowledge & troubleshooting skills in mechanics. Experience with; plumbing, pumps, seals & gaskets, drive systems (gear, belt, and chain), bearings & bushings, fastener thread designations & properties of lubricants., • Basic knowledge & troubleshooting skills in pneumatics. Experience with; basic understanding of how pneumatics work, knowledge of the function and type of control components., • Basic knowledge & troubleshooting skills in hydraulics. Experience with; basic understanding of how hydraulics work, knowledge of the function and type of control components, read and understand basic hydraulic prints., • Knowledge of general computer functions such as Microsoft Office programs, spreadsheets, etc., • Knowledge of basic safety regulations, • Skill in multi-tasking, • Skill in basic problem solving, • Skill with basic math procedures, • Skill in team-building, • Skill in interpersonal and communication, • Possess good mechanical aptitude to disassemble and assemble all types of equipment, • Ability to communicate with co-workers, management team members, and other individuals in a courteous and professional manner, • Ability to climb ladders, stairs or use a scissor lift to inspect and/or repair equipment., • Ability to work in a fast paced environment, • Ability to pay close attention to detail and coordinate various activities simultaneously, • Seeing: Must be able to read reports and use computer, • Hearing: Must be able to hear well enough to communicate with coworkers, • Standing/Walking/Mobility: Must be able to stand to open files and operate office equipment or mechanical equipment; mobility between departments or physical locations, and attend meetings of coworkers and management, • Climbing/Stooping/Kneeling: Must be able to climb, stoop, or kneel to perform routine tasks within the scope of job, • Lifting up to 50 lbs./ Pulling/Pushing:, • Ability to perform functions in a fast paced environment., • Promote and lead by example a safety culture that drives safety as number one., • Able to work in a varied temperature environment., • Adheres to Company Policy and Procedures., • Maintain a flexible work schedule to provide program continuity and visibility., • Acts as a role model outside and within the Company., • Performs duties as workload necessitates., • Maintains a positive and respectful attitude., • Meets departmental productivity standards., • Provides guidance for coworkers as needed or as requested., • Communicates regularly with supervisor about job-related issues., • Demonstrates flexible and efficient time management and ability to prioritize workload. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

The Lead Cook is responsible for cooking and preparing food using standard recipes and production guidelines while following food safety, food handling, and sanitation procedures. The individual in this role should safely handle knives and equipment including grills, fryers, ovens, broilers, etc. The Lead Cook may supervise employees and delegate responsibilities. The responsibilities of the position may vary by location based on client requirements and business needs. COMPENSATION: The Hourly rate for this position is $21.00 to $21.00. If both numbers are the same, that is the amount that Aramark expects to offer. This is Aramark?s good faith and reasonable estimate of the compensation for this position as of the time of posting. BENEFITS: Aramark offers comprehensive benefit programs and services for eligible employees including medical, dental, vision, and work/life resources. Additional benefits may include retirement savings plans like 401(k) and paid days off such as parental leave and disability coverage. Benefits vary by location and are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works. For more information about Aramark benefits, click here ___ BENEFITS: Aramark offers comprehensive benefit programs and services for eligible employees including medical, dental, vision, and work/life resources. Additional benefits may include retirement savings plans like 401(k) and paid days off such as parental leave and disability coverage. Benefits vary by location and are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works. For more information about Aramark benefits, click here There is no predetermined application window for this position, the position will close once a qualified candidate is selected. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all applicable laws, including, but not limited to all applicable Fair Chance Ordinances and Acts. For jobs in San Francisco, this includes the San Francisco Fair Chance Ordinance. • Schedules and assigns daily work activities to staff and supervises the completion of tasks., • Trains and guides staff on job duties, standard food safety and sanitation procedures, cooking methods, etc., • Cooks and prepares food following production guidelines and standardized recipes, • Sets up workstation with all needed ingredients and equipment, • Prepares ingredients by measuring, weighing, mixing, chopping, trimming, and peeling food items, • Safely uses all food utensils including knives, • Operates equipment such as ovens, stoves, slicers, mixers, etc., • Bakes, roasts, broils, steams, and uses a variety of cooking methods on meats, vegetables, and other foods, • Arranges, garnishes, and portions food following established guidelines, • Properly stores food by following food safety policies and procedures, • Cleans and sanitizes work areas, equipment, and utensils, • Maintains excellent customer service with a positive attitude towards guests, customers, clients, co-workers, etc., • Follows Aramark safety policies and procedures including food safety and sanitation, • Ensures security of company assets, • Produces and maintains work schedules and may prepare production records. At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. • Previous supervisor experience in a related role preferred, • Experience as a cook or related role required, • Ability to work independently with limited supervision required, • Proven knowledge of the basic principles of food preparation, various cooking methods, and food safety regulations such as proper food handling, sanitation, and storage, • Food safety certification required, • Demonstrates basic math and counting skills, • Demonstrates effective interpersonal and communication skills, both written and verbal This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking and standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at ___ or connect with us on ___, ___ and ___.

The ideal candidate will be responsible for implementing electrical components into devices. They will also help design and manufacture electrical products of all shapes and sizes. They should be able to make quality assurance checks in order to keep the product standard high. Responsibilities • Evaluate electrical products and systems by designing testing methods, • Test finished products and system capabilities, • Keep necessary equipment operational, • Contribute to team efforts by accomplishing related results Qualifications • Bachelor's degree in Electrical Engineering or related field, • Strong problem solving, technical, math and science skills, • Strong written and verbal communication

Job DescriptionCompany Description TOMRA North America, is a top International Reverse Vending and Recycling Company. At Tomra transformation is at the heart of everything we do. We transform ideas & technology to create intelligent and pioneering tools to support a sustainable future. Job Description Bottle and Can Retrieval Centers is recruiting for a Part Time Redemption Center Associate at our Syracuse, NY Location $16/HR must have weekend availability 30 hours a week Redemption Center Store Associates are responsible for assisting customers with their recyclable beverage containers. They will count the beverage containers manually or use technology to do this function. The customer service associate will also be responsible for using a cash register to complete customer transactions. ESSENTIAL DUTIES & RESPONSIBILITIES: • Assist our customers with recycling of bottles, cans and plastic beverage containers., • Process and store bottles and cans in an orderly fashion., • Ability to lift up to 25lbs, • Weekend Availability, • Basic math skills (addition, subtraction, multiplication), • Experience in customer service field, • Excellent Customer Service skills Pay rate starting at $16/HR plus generous tips #indsyrmv Qualifications QUALIFICATIONS: • Ability to lift up to 25lbs, • Weekend Availability, • Basic math skills (addition, subtraction, multiplication), • Experience in customer service field, • Excellent Customer Service skills, • Reliable transportation Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Overview At Community Financial System, Inc. (CFSI), we are dedicated to providing our customers with friendly, personalized, high-quality financial services and products. Our retail division, Community Bank, N.A., operates more than 200 customer facilities across Upstate New York, Northeastern Pennsylvania, Vermont and Western Massachusetts. Beyond retail banking, we also offer commercial banking, wealth management, investment management, insurance and risk management, and benefit plan administration. Just as our employees are committed to helping our customers manage their finances, we’re committed to our employees. After all, they make it happen for our customers every day. To ensure our people can enjoy long and successful careers here at CFSI, we offer competitive compensation, great benefits, and professional development and advancement opportunities. As an equal-opportunity workplace and affirmative-action employer, we celebrate and support a diverse workplace for the benefit of all: our employees, customers and communities. Responsibilities A Customer Service Representative (CSR) is responsible to deliver a positive customer experience to current and prospective bank customers on the banking floor. This position must be able to adapt well in the face of workplace stressors such as customers service complaints. It requires someone who will maintain the security of customer information, prioritize items of significance, and be a team player. • Provide quality customer service and a positive banking experience by handling financial transactions (i.e. opening of accounts) with a professional attitude, • Determine customer needs, explain and sell products and services, • Participate in branch prospecting efforts, • Assist customers with requests such as stop payments, wire transfers, balance discrepancies, loan information, etc., • Serve as a liaison between customer and operational areas, • May provide back up to the teller line as needed, • Ability to understand directions and adhere to established policy and procedures, • Able to remain focused, • Other related duties as assigned or directed Maintain proficient knowledge of, and demonstrate ongoing compliance with all laws and regulations applicable to this position, ensure ongoing adherence to policies, procedures, and internal controls, and meet all training requirements in a timely manner • As an integral member of the Branch, this position is also responsible to provide assistance wherever necessary to help the Branch and the Bank in achieving their annual goals, • May be called upon to travel to other branches in the area to provide support as needed and to ensure proper staffing levels Qualifications Education, Training and Requirements: • High School Diploma or GED, • Internal product and services knowledge, • Accurate and proficient math skills, • Professional and friendly interpersonal communications skills, • Proficient computer skills, • Clear thinking and ability to stay focused, • Thorough knowledge of bank products and services, • Must be able to consistently demonstrate the Company’s core values: a strong work ethic, integrity, respect for others, responsibility, transparency and humility, • Two (2) years of bank and/or customer service normally required, • All applicants must be 18 years of age or older

Job Description Customer Service Representative Staffworks is currently seeking a Customer Service Representative to fill an open position within a company located in Liverpool, NY. The ideal candidate should have great multitasking skills, be detail oriented, organized, and capable of communicating clearly and concisely. Requirements of the Customer Service Representative • High School Diploma or GED, • Associates or bachelor’s degree in business or related field preferred, • Minimum 5 years Customer Service or Sales preferred Benefits of the Customer Service Representative • Temp to Hire, • Weekly pay, • Benefits once hired on, • Monday – Friday, • 8:00am – 5:00pm, • $21.00 per hour DOE Responsibilities of the Customer Service Representative • Develops and maintains relationships with potential customers/ customers in the gasket, insulation, tape, and adhesive fields., • Interacts with customers via telephone, email, fax, or in person to provide support and information on products or services., • Applies knowledge of the field and product features to match products to the needs of customers., • Answers inquiries from clients concerning products, their uses, and the industry at large., • Provides information, quotes, credit terms, and other bid specifications to customers., • Facilitates the negotiation of prices, terms of sales, and/or service agreements; prepares contracts and submits orders., • Fields customer questions and complaints; when the issue is beyond the representative’s knowledge, forwards to the assigned specialist or other appropriate staff., • Ensures that appropriate actions are taken to resolve customers’ problems and concerns., • Collaborates with purchasing and production departments, managers, and other staff to confirm that orders are processed with accuracy and efficiency and that products are provided properly., • Maintains customer accounts and records of customer interactions with details of inquiries, complaints, or comments., • Maintains all customer and sales related filing., • Travel to meet with clients or potential clients will be required as needed, • Performs other duties as assigned. Required KSAs: • Reading, Speaking and Comprehending English – Advanced Math & Problem-Solving Skills – Detailed & Organized We are an Equal Opportunity Employer and celebrate diversity at all levels of our organization. Apply now for consideration!

Job DescriptionCompany Description We’re not just making pizzas — we’re running the fastest, most exciting pizza game in town. Domino’s is the #1 pizza delivery company in the world, and we’re looking for people who want to bring the energy, the hustle, and the good vibes every shift. Fast-paced. Fun. Flexible. Opportunities to move up quick (CSR → Shift Runner → GM). Teamwork, free food discounts, and an atmosphere that’s all about winning together. At Domino’s, every role matters — whether you’re answering phones, tossing dough, or leading a crew, you’re part of a team that keeps the ovens hot and the deliveries rolling. If you want a job where your work actually matters (and comes with some delicious perks), Domino’s is where it’s at. Be part of the team that delivers more than pizza — we deliver opportunity. Job Description Position Summary: As a Domino’s Customer Service Representative (CSR), you are the face and voice of the store. Your role is to provide excellent service to every customer—whether over the phone, at the counter, or through online orders—while helping the team run efficiently. Key Responsibilities: Greet customers warmly in person and over the phone. Accurately take customer orders and enter them into the point-of-sale system. Answer questions about menu items, promotions, and deals. Handle cash, credit, and debit transactions securely. Assist with food preparation when needed (making pizzas, preparing sides, cutting orders). Ensure the store remains clean and organized, including lobby, counter, and food prep areas. Maintain a positive, professional attitude with customers and teammates. Follow all safety, sanitation, and uniform standards. Qualifications Qualifications & Skills: Strong communication and customer service skills. Ability to multi-task and work in a fast-paced environment. Basic math skills and attention to detail for handling orders and payments. Team player with a strong work ethic and reliability. Must meet minimum age requirements (varies by state, typically 16+). Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionDescription: JOB SUMMARY: Will provide technical customer support to new and existing customer base, establish relationships with customers while providing support related to technical design, system design, and document design and troubleshooting. Will work closely with and develop relationships external our sales team and perform administrative functions for warranty returns. ESSENTIAL JOB DUTIES: • Responsible for maintaining manuals, catalogs, brochures and other literature for the Sales/Marketing Department, as directed, • Provide technical assistance for the Airport, LIR FAM product lines as direct, • Research and develop new product application proposals, current product redesign and prototype proposals, • Provide technical representation for the Sales/Marketing Department. This will require travel to consultants, job site, contractors or regional FAA offices, • Interpret plans, specifications and drawjngs to determine product requirements and develop bills of materials, • Represent the Company at trade shows and other related marketing events., • Facilitates customer visits and/or visits customer sites to resolve technical issues., • Provide technical assistance for departmental and manufacturing personnel, • Responsible for working safely and being conscious of safety for co-workers, • Minimum two years of college in mechanical technology or related degree, • Must have ability to read and interpret drawings and blueprints, • Possess and demonstrate positive mentoring and leadership qualities., • Possess and practice superior oral and written communication skills., • Treat all co-workers with dignity and respect., • Possess and utilize basic math skills and exercise superior organizational skills, • Ability to work independently Advanced computer skills that include AutoCAD, CNC programming, _______, _______, and the ability to send/receive e-mail. Must be able to read, create and change blueprints and drawings. May be required to operate Printer, Copier, Fax Machine, Telephone, Scanner, and calculator, micrometers and gages, power tools, hand tools, forklifts and pallet jacks. SUPERVISORY RESPONSIBILITIES The Inside Sales – Customer Service Rep. does not have any direct reports or supervisory responsibilities. PHYSICAL ACTIVITIES AND DEMANDS: Moderate Lifting: Exerting up to 10 pounds of force frequently and/or up to 25 pounds of force occasionally and/or a negligible amount of force frequently to move objects. MENTAL AND VISUAL DEMAND: Close mental and visual attention to prepare and analyze data and figures, work on a computer, read, or control machines or processes at a rapid pace that requires close coordination and fine adjustment. Moderate mental and visual attention to direct manual work, machine operations, set-ups, inspections, and adjustments that require frequent decisions to detect and adjust for variance from proper operation. ENVIRONMENTAL CONDITIONS: Occupational Hazards – Work in an office environment where there is little exposure to changing temperatures, hazardous chemicals of moving parts. Safety Equipment - May wear a variety of PPE when visiting the production floor, including safety glasses with side shields, safety shoes and other PPE in accordance with work tasks. Production Environment – May visit the manufacturing environmental where the employee may encounter directly or indirectly, a variety of production machinery, transport equipment, welding work, and computerized equipment. During hot weather, work processes can produce condensation on the floor resulting in slippery conditions. Employees are required to wear steel toed, slip resistant shoes while working in production areas. EMPLOYER'S DISCLAIMER: • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. Furthermore, the company reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Job Description Join the Automotive Revolution at Fenix Parts About Fenix Parts: Fenix Parts isn’t just a company; it's an essential part of the automotive recycling revolution. As a leading force in the recycling and resale of OEM automotive parts, we have made our mark in the industry for over 25 years. With a robust network expanding across more than 30 locations in the U.S., we are at the forefront of reducing the environmental impact of auto waste. We thrive on innovation, sustainability, and a commitment to excellence. Why Join Fenix? Our team is expanding rapidly to keep pace with our growth and the increasing demand for price-friendly automotive solutions. We are in search of passionate, skilled individuals who are ready to drive their career forward in a dynamic and rewarding environment. Position Overview: Customer Service As a key player on our team, you’ll engage in helping customers with all situations related to their accounts, orders and discrepancies. You will also be tasked with other customer service related duties as they may arise. Job Snapshot: • 5-day work week., • Handle incoming calls and emails from customers inquiring about selling their vehicles., • Maintain relationships with dealers, tow companies, and garages who continuously are looking to sell vehicles., • Arrange vehicle pickups from customer homes and businesses., • Maintain awareness of inventory levels and top sales parts, • Competitive Compensation: Attractive earnings with growth potential., • Benefits: Comprehensive benefits package including health, dental, and vision coverage, plus 401(k) options., • Work-Life Balance: Enjoy a stable day shift schedule from Monday to Friday., • Professional Development: Opportunities for advancement in a growing company., • High School Diploma or equivalent, • Excellent computer skills, • Excellent communication skills, • Strong math skills Equal Opportunity Employer: We are proud to be an Equal Opportunity/Affirmative Action employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran, or other protected status. Ready to Make a Difference? Become part of something bigger and help shape the future of automotive sustainability. Apply today to join our amazing team at Fenix Parts and drive forward your career. Together, let’s revitalize the way the world views automotive recycling!

Job Description River Valley Holdings is a family-owned distribution company based in Syracuse, NY, serving retail customers across the northeastern United States. The River Valley family of companies: River Valley Foods, Cavallaro Foods and Garden Spot Foods, distributes a wide range of specialty dry and frozen grocery items and consumable products out of warehouses in Syracuse, NY and New Holland, PA. Position Summary: River Valley Foods is looking for a Delivery Driver to join our growing transportation team. This position is responsible for the safe, timely, and accurate delivery of frozen and dry food products to retail and warehouse customers. Routes depart Monday – Friday and are typically home each evening, however there are overnight routes required at times. The ideal candidate is a dependable professional with strong driving skills, a commitment to safety and service, and experience handling food products in transit. Schedule: • Routes depart between 3AM and 6AM, Monday – Friday. Some overnight routes are required. Wages: • Starting at $28.00 per hour + Safe Driving Incentives Key Responsibilities: • Operate commercial delivery vehicles safely and efficiently, • Load and unload products using electric/manual pallet jacks and hand trucks, • Ensure proper handling and temperature control of frozen, refrigerated, and dry goods, • Verify deliveries with customers and collect required documentation/signatures, • Communicate professionally with dispatch and warehouse teams, • Represent the company professionally and deliver excellent customer service Qualifications: • 3+ Years of Commercial Driving Experience, • Valid CDL Class A license with air brake endorsement, • Clean driving record: No preventable accidents within the last year, no DUIs or license suspensions over 30 days within the last 3 years (MVR score under 16), • Pass FMSCA-approved drug screening and pre-employment physical, • Successfully complete written and on-road driving tests Skills & Physical Requirements: • Familiar with DOT regulations and food safety transport guidelines, • Customer-focused with strong time management and communication skills, • Detail-oriented and self-motivated, • Ability to lift up to 50 lbs and work in cold/freezer environments, • Able to read/write in English and perform basic math calculations, • Physically able to sit, stand, walk, climb, and lift daily Benefits: • Flexible Paid Time Off & Company Paid Holidays, • Health, Prescription and Dental Insurance, • Life and Disability Insurance, • 401(k) with company match, • Employee Assistance Program, • Employee Purchase Program River Valley Holdings is an Equal Opportunity Employer (EOE).

Job Description Location: G.M. Crisalli & Associates, Inc., Syracuse, NY Responsibilities: Primary responsibility for this position will be creating and managing information and administrative documentations on both the cost and income sides assisting with AP/AR processing and various administrative duties for multiple projects at a time. Reports To: General Summary of Duties: The Office Administrator is responsible for all logging, tracking, disbursing, and managing all information while working with other departments to ensure administrative organization, efficiency, and customer satisfaction. Travel: • Review and process sub billing, • Full charge bookkeeping, • Run and prepare reports for PM staff & President., • Assist with RFI’s submitting, tracking and logging., • Coordinate writing and processing of contracts, purchase orders, change orders., • Communicate daily with site superintendents and project managers., • Track job progress and paperwork, status of orders and client change orders, • Maintain project files and paperwork., • Develop & maintain working relationships with clients, consultants, and other customers., • Organize, plan & prioritize workload., • Communicating with supervisors and peers., • Problem resolution., • Work collaboratively with other departments. Minimum Job Qualifications: • Solid employment history, • Can demonstrate successful Full charge bookkeeping experience, • Microsoft Office Suite experience: Outlook, Excel, Word, PowerPoint (Advanced experience with spreadsheets & reports), • Timberline accounting software experience (strongly recommended) and/or Sage intacct, • Deadline & detail oriented., • Excellent verbal & written communication skills, • Strong accounting/bookkeeping/math skills, • Uses personal computer approximately 4-5 hours per day., • Uses telephone and email to communicate with consultants, contractors, and coworkers, approximately 5-6 hours per day., • Work is performed in an office setting where there is no substantial exposure to adverse environmental conditions.Company DescriptionEstablished Commercial Construction Company serving clients in the Northeastern, Midwestern and Mid-Atlantic United States. Located in Central New York for 34 years. Our company mission is to serve our clients with excellence. Building High Quality, Environmentally responsible, Socially conscientious projects on Budget and on Time.Established Commercial Construction Company serving clients in the Northeastern, Midwestern and Mid-Atlantic United States. Located in Central New York for 34 years. Our company mission is to serve our clients with excellence. Building High Quality, Environmentally responsible, Socially conscientious projects on Budget and on Time.

Job DescriptionClean Room Pharmaceutical Technician Job Description Join our team as a Clean Room Pharmaceutical Technician on the 2nd Shift, working from 1pm to 11:30pm, Sunday through Wednesday. This role involves operating production equipment, including non-sterile filling machines, and packaging and labeling machines. You will ensure the supply of materials to assigned positions, clean equipment and production areas, and inspect parts following standard operating procedures. This position is key in troubleshooting basic issues and may involve providing training to others. Responsibilities • Operate assigned equipment appropriately, including setup, operation, and cleaning of equipment and parts, ensuring configurations are correct and issues are communicated immediately., • Complete and review area production documentation, ensuring all entries are accurate, recorded in real time, and signed upon completion., • Maintain open communication with management regarding production updates, including deviations and corrective measures., • Exchange work status information within the department, management, and co-workers., • Maintain a clean work environment using appropriate cleaning solutions and prescribed methods and schedules., • Ensure designated equipment/tools are cleaned and sanitized according to established methods and schedules., • Clean and sanitize required glassware, completing wash documentation per SOP., • Handle raw materials and components according to prescribed methods, including procurement, weighing, verification, and formulation of solutions., • Maintain Aseptic Process Area sterile gowning qualifications., • Respond to equipment alarms or malfunctions immediately, communicating conditions to subject matter experts., • Assist co-workers in the production of finished products within time limits outlined in SOPs and/or manufacturing instructions., • Receive and ship plant uniforms and scrub uniforms for cleaning, stock garments and supplies for clean rooms and sterile core, and prepare garments for sterilization., • Assist with special projects as required or requested., • Promote a safe and harmonious work environment., • Maintain compliance with SOPs, GMPs, and all company policies.Essential Skills, • Associate or Bachelor's Degree from a regionally accredited institution., • One or more years of previous work experience in a hospital or manufacturing environment, preferably in a clean room setting., • Basic mechanical skills related to the operation of equipment., • Knowledge and skill in operating specialized equipment, such as filling, wash, and sanitizing equipment., • Skill in handling multiple projects or tasks simultaneously., • Advanced problem safety sensitivity and the ability to recognize safety issues., • Skill in time management and attention to detail., • Skill in math, with an understanding of measurements and conversions., • Skill in communicating professionally with coworkers and management., • Ability to apply critical thinking and maintain confidentiality.Additional Skills & Qualifications, • Knowledge of clean room procedures and GMP regulations, preferred but not required., • Experience with general computer functions such as Microsoft Office programs and spreadsheets., • Ability to follow personal hygiene standards and wear protective attire as required., • Ability to be flexible with work hours and provide motivational support.Work Environment This role requires working in a clean room, lab, and production environment. The position involves wearing protective attire as required and adhering to strict safety and hygiene standards. The shift schedule is 2nd Shift, from 1pm to 11:30pm, Sunday through Wednesday. Pay and Benefits The pay range for this position is $24.00 - $26.60/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Syracuse,NY. Application Deadline This position is anticipated to close on Sep 22, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job DescriptionDescription: You are applying for work with a franchisee of Taco Bell, not Taco Bell Corp. or any of its affiliates. If hired, the franchisee will be your only employer. Franchisees are independent business owners who set their own wage and benefit programs that can vary among franchisees. The Taco Bell Assistant General Manager supports the Restaurant General Manager by running great work shifts and meeting Taco Bell standards. You take ownership and responsibility to solve problems, seek help when needed and are willing to help and guide others. Key responsibilities include making sure Team Members and Shift Managers complete all assigned duties, inventory management, and financial accountability and serve safe, quality food in a friendly manner. You’ll also ensure that the restaurant is a safe place for all employees to work and customers to visit. Benefits • Paid time off, • Dental insurance, • Health insurance, • Vision insurance, • 401(k) with company matching, • Bonus eligible position, • GED Program, Tuition Assistance and Scholarship Program, • Meal discounts available Requirements: • 1-3 years supervisory experience in either a food service or retail environment, including Profit and Loss responsibility, • Basic personal computer literacy, • Must be at least 18 years old, • Basic business math and accounting skills, and strong analytical/decision-making skill, • Able to tolerate walking and lifting up to 50 lbs. and standing during 80% of shift time, • Background checks are run on all management employees, • Must have reliable transportation and valid driver’s license

Job Description Job Description: Our team is looking for a qualified construction superintendent to ensure our projects are delivered successfully and on time. This position will provide direct on-site supervision and overall management of commercial construction projects. The successful candidate must possess the knowledge, experience, and confidence to engage and professionally interact with the design professionals, consultants and client while successfully directing the subcontractors and other construction related personnel in planning, coordinating and safely executing the work in accordance with the contract documents, schedule and budget. This position requires strict adherence to quality standards and ensures the safety and security of the construction site. This individual will work closely with the Project Manager and fulfill an integral role on the project. Responsibilities: • Help develop the overall critical path schedule with the Project Manager prior to construction and manage that schedule throughout the project including the creation and maintenance of 2-4 week look-ahead schedules. Identify schedule slides and correct independently or in collaboration with the Project Manager., • Develop and maintain the site logistics plan for the project., • Perform constructability reviews and inform the Project Manager of any errors, discrepancies, and omissions or challenges with the building design and sequencing., • Review and assist in developing scopes of work for each relevant subcontractor., • Set up the Redev CNY field office appropriate for the project which may include a job trailer(s), storage container(s), chemical toilet(s), temporary fencing and security, project and safety signage, parking facilities and signage, and doors and locks for use during construction., • Conduct preconstruction meetings with all subcontractors prior to beginning each phase of work., • Communicate regularly and professionally with all members of the project team including clients, architects, engineers, subcontractors, suppliers, and colleagues to ensure they are informed of relevant project information., • Solicit and select suppliers for required materials, equipment, and project supplies based on supplier capabilities, schedule requirements, and cost. Arrange for regular maintenance of rental equipment., • 100% of our work is subcontracted out. Schedule and supervise subcontractors, suppliers, vendors, and utilities using the critical path schedule to ensure timely project completion., • Control all day-to-day site activities and complete daily logs to document progress and/or challenges on site., • Conduct weekly subcontractor & safety meetings., • Maintain an organized, clean, and orderly field office and job site. Create and/or maintain the following project documentation: daily reports, safety checklists, safety meetings, OSHA postings, purchase orders, meeting minutes, as-built drawings, requests for information, shop drawings, submittals, test reports, and any other necessary project documentation., • Ensure all employees and subcontractors on-site perform work in a safe manner, which complies with Redev CNY’s safety program and OSHA guidelines. Prepare a project-specific safety plan when required, and solicit and review subcontractor safety plans for their own scopes of work., • Perform regular job site inspections to identify potential issues such as safety issues, poor work quality, material availability etc. Instruct staff and comply with all client requirements for site access, material staging, cleanliness etc., • Ensure the project site is kept clean and in a safe working environment., • Coordinate and direct independent testing and inspections as required., • Maintain and enforce good construction standards and quality control to ensure conformance with contract documents., • Ensure that “as-built” drawings are prepared on an ongoing basis by all trades during the construction period., • Coordinate all required municipal inspections. Clearly display construction permits in the building and/or field office., • Conduct project related meetings including but not limited to conducting pre-construction conferences with subcontractors and suppliers, conducting subcontractor meetings, and sending various forms of written correspondence., • Perform hands-on field work as required to meet project or schedule requirements., • Associates or Bachelor’s degree in construction related field; or equivalent combination of education and experience., • A minimum of 5 to 10 years hands-on commercial construction experience including supervisory experience., • Demonstrated knowledge of construction methods, materials, and regulations., • Strong ability to read and interpret drawings and specifications., • Effective use of technology: mobile phone, email, computer software, digital camera, etc., • Proficient in Microsoft Project, Word, and Excel., • Strong written and verbal communication skills; ability to professionally interact with customers, vendors, subcontractors, and colleagues., • Ability to work with and provide direct supervision to subcontractors, vendors, suppliers to meet contractual requirements., • Good math/accounting skills., • Functions effectively as part of a team., • Must understand the importance of safety and quality on job sites., • Strong decision making/problem solving skills., • Excellent time management and organizational skills., • Ability to maintain discretion and confidentiality at all times. Job Type: Full-time Pay: $80,000.00 – $115,000.00 per year Benefits: 401(k) 401(k) matching Dental insurance Vision insurance Health insurance Life insurance Paid time off Referral program Schedule: Monday to Friday Supplemental Pay: Bonus pay Work Location: Multiple locations Work Remotely: No

Job DescriptionDescription: You are applying for work with a franchisee of Taco Bell, not Taco Bell Corp. or any of its affiliates. If hired, the franchisee will be your only employer. Franchisees are independent business owners who set their own wage and benefit programs that can vary among franchisees. The Area Coach (AC) provides overall leadership and direct supervision of approximately 4 - 10 Taco Bell restaurants to ensure that each Restaurant General Manager (RGM) meets or exceeds the Annual Operating Plan established for their individual unit. Benefits • 401(k) with company matching, • Paid time off, • Bonus eligible position, • Dental insurance, • Health insurance, • Vision insurance, • Mileage reimbursement Role: • People Role model the How We Work Together Principles., • Find and hire and develop the best RGMs, Assistant General Managers and Shift Managers., • Coach your RGMs on the “4 Rights” in their restaurants and provide regular feedback during 1:1 sessions., • Take action without being told, go beyond what is simply required and maintain a high activity level., • Understand how customers are viewing your restaurants through scheduled visits and detailed analysis (VOC and CORE)., • Lead product and program rollouts with your RGMs to ensure success., • Resolve Customer complaints quickly while maintaining positive Customer relations., • Demonstrates a positive and enthusiastic attitude with co-workers, employees and customers., • Analyze the financial performance of your area and understand trends. Requirements: The ideal candidate for the Area Coach position will possess: • 5 years of successful, operational multi-unit management experience., • Demonstrated track record of workplace achievement in the selection, coaching and development of managerial employees., • Proven ability to achieve a high level of customer satisfaction, financial performance and employee satisfaction, • Good communication skills and strong interpersonal and conflict resolution skills., • Exceptional team building capability., • Basic business math and accounting skills, and strong analytical decision making skills., • Basic personal computer literacy, • Must have reliable transportation and valid driver’s license, • Must be able to travel between designated stores daily, • Background checks are run on all management employees

Math Writing Editor Remote Job Duties: The Math Writing Editor ensures that all Eureka Math content—including print and digital curricula, professional development presentations, and public-facing documents—meets our

Job Description Multiple Dining Services Worker Position Openings! Full-Time / Part-Time Many of our interviews are being done from the comfort of your own home, via pre-recorded interviews. Job Description: The primary purpose of this position is plating meals for serving the units and waiting on residents in the dining room. This position works as part of a team to provide nutritionally adequate meals to the Residents and Patients of St. Camillus. Responsibilities: Food handling and preparation • Maintaining a safe and sanitary kitchen., • Review meal tickets to ensure accuracy., • Plate food includes proper portion size and correct presentation., • Follow menus to ensure food is part of residents/patients’ meal plans., • Follow and prepare items on beverage and cold food production sheets., • Must be able to scrape dishes/trays, load wash machines, unload clean dishes., • Assists in assembling and disassembling the dish machine to clean it., • Organizes clean dishes and utensils into proper storage spaces., • Wash pots and pans using the 3-sink method as needed., • Clean equipment and storage areas and in the kitchen using the proper chemicals., • Empty all kitchen garbage and recyclables, take out garbage and clean all receptacles., • Answer the phone and provide resident requests in a timely manner., • Calibrates and uses a food thermometer correctly when needed., • Records and monitors temperature for all coolers to ensure proper food safety., • Ensure proper food storage, rotate inventory and report any damaged inventory to management. Qualifications: • Ability to read & speak English with an understanding of basic math., • Strong interpersonal skills required., • Open Availability is preferred., • Availability to work every other weekend is required. Employee Benefits: • No Mandated Shifts., • Daily Pay., • Generous PTO Structure for Full Time employees with no waiting period., • Health/Health Reimbursement Account/Dental/Vision Plans available., • Company Provided Life Insurance for Full-Time employees., • Retirement Plans., • Tuition Reimbursement., • On the Centro Bus Line., • Free parking., • Because we are a not for profit, you may qualify for student loan forgiveness through the Public Service Loan Forgiveness (PSLF) program. Why work for St. Camillus? Our Mission: St. Camillus is a non-denominational, not-for-profit organization dedicated to caring for life through a broad range of health care services. Our Vision: To be the provider of choice for compassionate and innovative care If you are interested in joining a team of professionals who are committed to providing high quality services in a caring environment, we want to hear from you! EOE/Affirmative Action Employer Visit our website at

Job Description Schedule: Sunday - Thursday, 2 PM - work is done What you'll be doing: • Unload delivery trucks, • Stock shelves & rollers as required, • Operating an electric and hydraulic pallet jack, and forklift, • Building orders for retail account delivery, • Verify that trucks have been loaded properly, • Sweep, stack empty pallets, and pick up stretch wrap, and dump trash barrels throughout warehouse, • Level off pallets on load line & make sure products are left in proper location., • Prior warehouse experience a plus, but not necessary as we train in-house, • Ability and willingness to become certified on forklift operations, • Must be able to learn voice pick system & work independently, • Ability to read, write, and fundamental math skills, • Strong attention to detail and work ethic, • Hourly Rate of Pay is $20.80 + night differential, • $3000 sign on bonus offered, • Medical/Dental/Vision Insurance - $0 in-network deductible, low premium contribution, • Paid Time Off, • Employee Assistance Program with Work-Life Services, • Tuition Assistance Program, • 401k Savings Plan with company match (after service requirement), • Discounted Pet Insurance, • Computer and cell phone plan discounts, • Supplemental Plans available: Disability, Life Insurance, Legal & Identity Protection *In applying for this job and providing your phone number, you are authorizing the Sheehan Family Companies to contact you via text message for recruiting purposes. You may opt out of text messaging at any time. #donotsponsor

Job DescriptionDescriptionLocation: SUNY Medical Address: 750 E ADAMS STPosition: Cashier (Part Time) Shifts: Varying Hourly Pay: 17.50 Cashier responsible for operating a specified parking lot by performing cash transactions and providing excellent customer service. The Cashier ensures proper ticket handling and guest payments while delivering service that exceeds our customer/client’s expectations. The Cashier is responsible for taking payments and assisting guests as they enter or exit the property. The Cashier works closely with fellow team members, Operation Manager, and/or Shift Supervisor to ensure that cash handling procedures as well as safety standards are met at all times. Key Responsibilities • Responsible for performing cash transactions with accuracy and precision, • Keeping your cash organized and knowing what you have on hand, • Ensuring your cash and tickets are sorted throughout the day, • Preparing your cash control/summary sheets with accuracy and neatness, • Reporting all overages and shortages, • Making sure you plan ahead to have adequate change on hand, • Completing all Reimagined documents completely, accurately and neatly, • Responsible for keeping work environment neat and organized at all times, • Cleaning and organizing the interior of booth, • Cleaning the booth windows, • Ensuring the signage and equipment on the lot is continuously wiped down and free of vandalism and graffiti, • Walking through the parking lot and picking up any excess garbage and changing bags in garbage cans, • Ensuring supplies are properly stacked and organized at all times, • Responsible for maintaining a safe and secure work environment, • Ensuring the windows and doors are locked and cash is taken with you if you have to leave the booth for any reason, • Securing your monies and control sheets by putting them in a deposit bag and keeping it secure prior to their deposit, • Report all odd occurrences or strange persons on the lot to your supervisor immediately, • Responsible for being punctual and ensuring that your timecard is punched at the beginning and end of your shift, • Adhering to the Reimagined Parking dress code for proper attire and grooming, • Responsible for adhering to all company policies and procedures, • Resolving customer complaints quickly and efficiently, • Providing exceptional customer service by being pleasant, courteous and helpful to customers, • Greet arriving and departing guests in a friendly and courteous manner, • Use respectful communication to assist guests with their questions, problems, and concerns; relay information to shift or Operations Manager as necessary, • Issue and or collect visitor parking tickets, • Match visitor ticket forms when original tickets cannot located, • Complete shift/daily reconciliation of receipts, cash, and charges; accurately account for all funds within cashier drawer, • Perform revenue drops following specific location procedures, • Maintain a clean, orderly, and safe work area in and around the cashier’s booth, • Answers telephone in a prompt and courteous manner, when required, • Immediately report any accidents, incidents or safety concerns to Operations Manager or Shift Lead, • Communicate professionally at all times with guests, client, and teammates, • Other duties as may be assigned Skills, Knowledge and Expertise • Excellent customer service and communication skills, • Ability to verbally communicate with guests, • Ability to learn quickly and use sound decision making to thrive in fast-paced environments, • At least 18 years of age, • Basic math skills, • Experience with cash handling is an asset, • Previous customer service experience, preferred BenefitsJoin our team and enjoy an outstanding benefits package, including: (Full Time Only) Generous Paid Time Off: Enjoy 10 days of paid time off, plus 8 paid holidays, so you can rest and recharge. Comprehensive Health Plans: Access top-notch Medical, Dental, and Vision coverage for you and your family. Life and Disability Insurance: Company paid basic life and Short-Term Disability to secure your future with essential protection for you and additional options for your loved ones. 401(k) Plan: Benefit from a generous employer match with immediate vesting to help you save for retirement. Employee Assistance Program: Access behavioral Health Care to assist with personal needs for you and your family members. Parental and Caregiver Leave: Enjoy time off to support your growing family or care for loved ones. (Part Time) 401(k) Plan: Benefit from a generous employer match with immediate vesting to help you save for retirement. Sick Time Off: Prioritize your health and well-being with paid sick leave based on state laws and regulations. Employee Assistance Program: Access behavioral Health Care to assist with personal needs for you and your family members.

Job Description Seal & Design, Inc. is a family owned company founded and located in Clarence, NY with three divisions located across the U.S. and Canada. Our product line includes gaskets, o-rings, seals, molded products, die-cut foams, and many other specific products for all kinds of sealing applications. We provide superior products to our customers across many industries, including: Automotive, Medical, Military, Aerospace, Electronics, Power Generation, Hydraulics, and HVAC. We are looking for a Packager to join our team! First shift: Monday - Friday, 6:00 AM to 2:30 PM Pay Rate: $20-24 Responsibilities: · Follows job specifications for packaging as detailed on the job card · Records start and completion of job · Removes web from stamped parts and completes visual inspection · Advises supervisor of shortfalls in quality and temporarily suspends sorting until issue is resolved; escalates to Plant Manager if needed · Performs secondary inspection as directed by Plant Manager or Quality Control Dept. · Follows FIFO protocol for inventory rotation · Maintains proper housekeeping during and at the end of work shift · Meets or exceeds department efficiency and productivity goals Cross trains and assists in other departments as required to meet production needs/deadline Requirements To be seriously considered for this role, please have the following regarding: Experience: 1 year of Manufacturing Experience Education: High School Diploma Skills: Proficiency working in a computer supported environment with business software, basic math & language skills, strong attention to detail, ability to work independently and as a member of a team Benefits • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance

Job Description Armstrong has an opening for a Tool Crib Attendant F/T on first shift. Armstrong Rapid Manufacturing has been in business for over 50 years in the East Syracuse NY area. Armstrong specializes in both prototyped and low volume production machined castings. Armstrong has a benefit package that includes paid holidays, bonus and referral programs, paid vacation, 401K, 100% company paid life insurance, sick time, supplemental short term disability insurance, dental, vision, medical, accident, cancer and critical care insurance and safety awards. We also provide free coffee daily for our employees available at multiple coffee kiosks. Our website is and it shows many of the exciting aspects of our company! Take a look! The Salary Range for our Tool Crib Attendant job is $17.00-$20.00 per hour. Refer to the job description below: The Tool Crib Attendant organizes and maintains the machine shop tool crib including tool setups (presetting), issuing fixtures and gauges and managing the perishable tool supply. Job Responsibilities • Sets tooling for CNC machine tools as required prior to machine set up., • Assembles necessary fixtures, gauges, etc. for issue with setup package., • Develops and maintains a tool bill of material database., • Coordinates with outside services to manage the perishable tool inventory., • Loads programs into and out of shop machine tools. Maintains organization of program directories and revision control., • Manages storage and databases for tools, fixtures, component parts, and assembly hardware., • Tears down and inventories tool assemblies and components upon job completion., • Completes and/or maintains required reports and records., • Adheres to all safety policies and practices, consistently uses personal protective equipment, and practices good housekeeping., • Maintains regular on-time attendance and adheres to company policies, procedures, and standards of conduct., • Proactively supports the ISO process approach to quality management and the Syteline MIS system., • High school graduate or equivalent with good math skills, • Strong mechanical aptitude, • Experience using close tolerance measuring devices is a plus., • Strong attention to detail. Ability to walk, remain on feet for extended time periods, reach, stoop, kneel and lift up to and including 35 pounds as needed. Visual abilities and manual dexterity. AAP/EEO Statement Armstrong Mold Corporation is committed to equal opportunity, to providing a work environment that is free from unlawful discrimination and will not discriminate with regard to race, religion, color, national origin, sex, age, veteran status, disability, genetic information, or any other protected status. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, age, veteran status, disability, genetic information, or any other protected status. Armstrong Mold Corporation is proud to be an Equal Opportunity Employer (EOE). Armstrong Mold Corporation will make reasonable accommodation(s) for qualified applicants with disabilities and employees* If you are interested in applying for employment and feel you need a reasonable accommodation to apply for a posted position, or are an employee with a question contact Human Resources at 315-437-1517 or by email to . • unless an employee reasonable accommodation would result in undue hardship. Job Posted by ApplicantPro

Job Description Why Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role The Warehouse Associate/Driver will be responsible for accurately receiving, storing, picking, and shipping products, ensuring that all tasks meet company standards for accuracy, attention to detail, sanitation, safety, security, and productivity. In addition, this role requires driving a company vehicle within the assigned geographic area, with a strong emphasis on maintaining safety for oneself and others while on the road. What You'll Do • Count all products, compare to packing slip/Warehouse Management System (WMS) and check all shipments for damage, quantity, part number accuracy and expiration dates., • Report shortages, damages and mis-shipments (“shipment errors” or “incorrect shipments”) on appropriate forms. Sign for inbound shipments when necessary., • Unload inbound shipments safely and move product to storage locations. Efficiently stack and store merchandise in pallet, static, cantilever, yard and wire storage areas/rack., • Ensure that the correct number and type of product is picked in WMS. Transport orders to shipping locations or delivery platforms with material handling equipment. Bag, tag or mark orders as required., • Compare quantity, labeling and address with order to ensure outgoing shipments are complete and correct in WMS. Accept signature for outbound as necessary. Efficiently move product into trailers, box/rack trucks, vans, cars or containers., • Maintain all equipment in a neat, clean and orderly fashion., • Operate equipment safely and efficiently, while complying with OSHA and company standards., • Assist in inventory accuracy and cycle counts. Ensure proper stock rotation. Preform aisle assessments and assignments., • Other duties such as repack or re-box cases per training and storage instructions. Repair and recoup damaged goods as required. Operate shrink-wrap machine. Charge forklift battery as needed; repair pallets when necessary; clean floors, work area, yard and truck bays as requested; empty trash, refill supplies for order processing and remove snow as required., • Load/unload cargo, • Execute local deliveries and obtain authorization signatures, • Ensure the receipt, coordination, and safety of goods coming through the warehouse, • Ensure products are stocked correctly and safely What You'll Bring • High School Diploma or equivalent, • Minimum one year warehouse experience, • Experience with Warehouse Management Systems preferred, • Fork-Lift Certification preferred, • Minimum 1 Year Driving Experience, • Valid Driver's License with clean driving record, • DOT Medical Certificate/Card required, • Ability to climb and lift minimum 25lbs, • Must be able to read, count accurately, do simple math (add, subtract, multiply, divide) and write legibly., • Ability to follow directions with emphasis on safety, • Ability to multi-task and meet tight deadlines, • Ability to be flexible What We Offer We offer a competitive benefits package that includes: • 401(k) plan, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid holidays, • Vacation, • Employee negotiated discounts Who We Are Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website or our LinkedIn: @Turtle. Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description At St. Camillus, we’re Centered on Celebrating our Employees, our team is what makes St. Camillus such a great place to work! We are currently hiring a Dining Services Worker Team Lead member to join our team! Responsibilities: The primary purpose of this position is plate meals for serving on the units and maintain a safe sanitary kitchen area. This position works as part of a team to provide nutritionally adequate meals to the Residents and Patients of St. Camillus. • Demonstrates professional and ethical standards at all times. Immediately informs facility management of any suspected violation of ethical standards., • Cares for others with respect and dignity., • Provides excellent service to residents and other customers., • Promotes innovation in delivering services., • Knowledgeable and respectful of residents rights., • Maintains confidentiality at all times, including confidentiality of protected health information., • Works as part of a team. Communicates in an appropriate manner with other staff, residents, families and visitors., • Follows supervisory/managerial instructions and performs all assigned work in a diligent and appropriate manner; possesses ability to accept constructive feedback., • Exhibits the ability to be flexible in meeting the needs of residents, families and the facility; assists other employees as needed., • Organizes and prioritizes daily work., • Assists in maintaining work areas in a clean and sanitary manner., • Promptly reports unsafe, unsanitary conditions/equipment to supervisor., • Arrives at work consistently at scheduled time. Appropriately uses benefit time. Follows time-keeping procedures., • Dresses according to the dress code. Consistently displays identification badge., • Assists in the orientation of newly assigned personnel to unit/department., • Attends and participates in all mandated in-service education programs and makes learning needs known to supervisor. Qualifications: • There is a minimum of a high school diploma or equivalent., • Candidate must be able to read English and have basic math skills., • This position requires the ability to work with people., • Must have flexible availability., • Knowledge of Nursing Home Dining Services Department Employee Benefits: • No Mandated Shifts, • Daily Pay, • Generous PTO Structure for Full Time employees with no waiting period, • Health/Health Reimbursement Account/Dental/Vision Plans available, • Company Provided Life Insurance for Full Time employees, • Retirement Plans, • Tuition Reimbursement, • On the Centro Bus Line, • Free parking Our Mission: St. Camillus is a non-denominational, not-for-profit organization dedicated to caring for life through a broad range of health care services. Our Vision: To be the provider of choice for compassionate and innovative care. If you are interested in joining a team of professionals who are committed to providing high quality services in a caring environment, we want to hear from you! To find more information about St. Camillus visit our website at EOE/Affirmative Action Employer