Mig welder jobs in Dallas, TexasCreate job alerts

Job DescriptionTitle: Production Maintenance Technician Location: Dallas, TX Shift: M-F 5:00 AM-3:30PM Pay: $25-30 per hour Requirements: • 1+ years of recent experience performing maintenance on production equipment GENERAL DESCRIPTION: Perform maintenance and sanitation duties on the production line as required by the Standard Operating Procedures and Supervisor direction. ESSENTIAL DUTIES/RESPONSIBILITIES/FUNCTIONS: • Create and maintain all robot and automation controls programs for all equipment., • Implement automation opportunities for cost savings., • Maintain robotic, control systems, and safety control systems including PLC/PC controllers and industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus, motor control systems, servo drives, frequency drives, and electrical distribution systems., • Maintain all PLC and software, plant wide. Integrate existing and new equipment, as needed., • Identify, maintain, and troubleshoot Motor Controls, including motor starters, Variable Frequency Drives, DC drives, and standard electrical components., • Troubleshoot industrial electrical, including 480V 3-phase, 110 VAC, and 24VDC systems., • Assist in the mechanical maintenance of equipment, as needed., • Disassemble production filling equipment (remove fill valves, cylinders, hopper, supply hoses)., • Reassemble and setup production filling equipment (replace fill valves, cylinders, hopper, supply hoses) using hand tools., • Setup production lines for specific products (adjust fill volume, set cap height, set date code, and rail width)., • Learns and begins to develop personal knowledge of proper basic troubleshooting techniques to diagnose and repair mechanical, electrical and control system problems, • Troubleshoot and repair plant equipment (fillers, pumps, tanks, valves, cappers, conveyors, etc.) using their hands, hand tools, problem solving skills, computer, HVAC, boilers, chillers, bathroom fixtures, air compressors, etc., • Safely use appropriate equipment for each repair (welder, hand tools, electrical meter, grinders, etc.), • Maintain plant equipment in a technically perfect condition as per SOP's, Machine Service and Repair Manuals., • Log all work and wrench-time on daily work orders and/or in the CMMS, • Clean equipment as directed using chemicals, spray hose, etc. after completing maintenance tasks., • Perform carpentry tasks to frame walls, install sheetrock and repair holes in the walls., • Paint company-owned equipment and facility as needed basis., • Use company approved personal protective equipment (PPE) as required for various tasks., • Operate a scissor lift to change lamps in high bay fixtures, assist with installing electrical conduits in an overhead ceiling, etc., • Perform work in Permitted and Non-Permitted Confined Space, Inside Mixing vessels, Storage Tanks etc., • Order equipment parts using a parts requisition form and return to Maintenance Supervisor or Designated Parts Coordinator, • Work long hours and call-ins as needed., • Work in a safe manner always, complying with safety, health, environmental, food and drug regulations, GMPs and company policies., • Communicate corrective and preventive issues to managers and coworkers., • Cooperate with production personnel to ensure maximum quality and production., • Work cooperatively with co-workers and supervisors., • Maintain regular and punctual attendance at work ., • All other duties as assigned. QUALIFICATIONS & SKILLS REQUIRED TO PERFORM JOB DUTIES: • Mechanical ability., • Knowledge of Lockout/Tagout procedures., • Knowledge of pneumatics, hydraulics, mechanical and electrical., • Knowledge of MIG and TIG welding., • Knowledge of maintenance and repair of electrical, plumbing and HVAC., • Carpentry skills., • English reading ability for reading and understanding schematics, manuals, building plans, building codes and safety regulations., • Knowledge of building codes such as electrical, plumbing, and HVAC., • Ability to operate a forklift/scissor lift., • Ability to read and follow written instructions, reports, equipment manufacturer instructions and requirements., • Ability to follow verbal instructions., • Ability to use simple math to measure fill speed, fill rate, etc., • Ability to Communicate Clearly, • Willing and able to work long hours and off-shift., • Ability to properly use hand tools., • Ability to properly use measuring devices (tape measure, depth gauge, calipers, micrometers, etc), • Willingness to perform tasks as required., • Ability to work with Supervision. PHYSICAL REQUIREMENTS TO PERFORM JOB DUTIES: • Lift up to 50 pounds from the floor level to shoulder height or vise versa., • Stand for up to three hours at a time., • Visual acuity see set up, recognize problems, troubleshoot and make repairs., • Sit, bend, squat, reach, pull, twist, and turn., • Reach forward and overhead., • Manual dexterity skills to use hand tools, such as wrench, pliers, sockets, wrenches, socket sets, screwdrivers, etc., • Use of power equipment such as welder, hand tools, electrical meter, grinders, etc., • Able to use cleaning chemicals., • Good eye/hand coordination. EDUCATION AND/OR EXPERIENCE REQUIRED TO PERFORM JOB DUTIES: • High school diploma or equivalent., • Trade school or technical school training is preferred., • 1-2 years previous work experience in a manufacturing environment preferred., • 1-2 years mechanical experience., • Experience with diagnosing and troubleshooting is preferred., • Experience with preventative maintenance., • Experience with MIG and TIG welding., • Familiarity with high-speed packaging and filling equipment. COM 187 Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services. Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

SCOPE OF JOB: We are seeking a skilled Welder/Maintenance Worker with 1-2 years of experience in welding and metal fabrication. The ideal candidate will be proficient in MIG welding applications for mild steel and galvanized steel, possess knowledge of metal fabrication tools such as metal cutting saws, grinders, and drills, and have forklift experience. This role involves executing welding tasks to ensure the structural integrity of equipment and facilities, as well as performing routine maintenance duties to uphold operational efficiency. JOB RESPONSIBILITIES: Welding • Perform MIG welding applications for mild steel and galvanized steel in accordance with project specifications., • Interpret blueprints, drawings, and welding symbols to determine welding requirements., • Ensure welds meet quality standards and structural integrity requirements., • Conduct visual inspections of welded surfaces and make necessary adjustments., • Maintain welding equipment and tools in good working condition. Metal Fabrication • Utilize metal fabrication tools such as metal cutting saws, grinders, and drills to fabricate and modify metal components., • Cut, shape, and assemble metal pieces according to project requirements., • Measure and align workpieces using precision instruments., • Collaborate with team members to optimize fabrication processes and techniques. Maintenance • Perform routine maintenance tasks to ensure the proper functioning of equipment and facilities., • Conduct inspections to identify and address potential maintenance issues., • Troubleshoot equipment malfunctions and perform repairs as needed., • Maintain inventory of maintenance supplies and materials., • Adhere to safety protocols and regulations while performing maintenance activities. Forklift Operation: • Safely operate forklifts to transport materials and equipment within the facility., • Load and unload materials from trucks and storage areas., • Conduct pre-operational checks and routine maintenance on forklifts., • Follow proper procedures for handling hazardous materials and heavy loads KNOWLEDGE/SKILLS/ABILITIES: • 1-2 years of experience in welding and metal fabrication., • Proficiency in MIG welding applications for mild steel and galvanized steel., • Knowledge of metal fabrication tools including hammers, grinders, and drills., • Ability to read and interpret blueprints, drawings, and welding symbols., • Experience operating forklifts and familiarity with forklift safety protocols., • Strong attention to detail and ability to produce high-quality welds., • Effective communication skills and ability to work well within a team., • Willingness to adhere to safety protocols and regulations. EDUCATION • High school diploma or equivalent., • Completion of a vocational or technical training program in welding is preferred. PHYSICAL REQUIREMENTS: • Work is performed in a manufacturing or industrial environment with exposure to noise, fumes, and varying temperatures., • Required to wear appropriate personal protective equipment (PPE) including welding helmets, gloves, and safety glasses. Note: Nothing in this job description restricts managements right to assign or re-assign duties and responsibilities to this job at any time. PIb53e76a891d1-26289-39677213

Job Description American Concrete Products is a leading manufacturer of quality concrete products for various industries. We are currently seeking a skilled and reliable maintenance welder to join our team. The maintenance welder will be responsible for maintaining and repairing forms, machinery, equipment, and facilities to ensure smooth operations and maximize productivity. Responsibilities • Perform preventive maintenance and welding on forms, machinery, and equipment, • Perform routine maintenance tasks such as lubricating, cleaning, and adjusting equipment., • Operation of MIG and Stick (SMAW) welding machines, • Detect and diagnose issues using testing equipment and diagnostic tools, • Other general labor/maintenance duties as assigned Requirements • High school diploma or GED w/ 1-2 years of related welding experience is required, • SMAW and MIG welding experience, • Fabrication experience, • Must be able to read blueprints with ease, • Some experience as a Maintenance Technician or similar role required, • Knowledge of mechanical, electrical, and hydraulic systems a plus Benefits • Pay rate between $25-$30, • FULLTIME YEAR-ROUND WORK, • Medical, Dental & Vision Benefit’s after 60 Days, • Competitive Compensation & Profit Sharing, • Available Over Time, • 401K with Match, • Internal promotional opportunities, • Company Sustainability – Since 1940 Enterprise Properties, Inc. and its subsidiaries are an equal opportunity employer that complies with EEOC rules and regulations. American Concrete Products is part of the Enterprise Properties, Inc Family Pre-Employment Drug Screen, Criminal Background check, Reference check & Employment Verification are all part of our hiring process. #ACPTX2021

Job Description Dallas, TX 75244 5AM to 1:30PM w/OT M-F | 1st Shift | $23/Hr This opportunity is exceptional and therefore requires excellent job stability. We are hiring an experienced Welder for a well-established industrial manufacturing operation in Dallas. This is a hands-on production welding position for someone who can read prints, fit and tack parts, set up their own machine, and consistently produce quality welds without needing to be walked through every step. What You’ll Be Doing • MIG and/or TIG weld metal components and assemblies, • Read and work from blueprints, weld symbols, drawings and work instructions, • Fit, tack and finish-weld parts to print specifications, • Set up welding equipment and make appropriate adjustments for the material and job, • Measure and inspect parts to verify dimensions and weld quality, • Use fixtures, clamps, layout tables and other tools to position components, • Grind, finish and clean completed welds as needed, • Use grinders, drills, saws and other hand/power tools, • Identify weld defects, dimensional issues or material problems and correct or report them, • Complete rework or weld repairs when required, • Handle and move material safely, • Maintain a clean and safe work area, • Help other areas of production when needed What We’re Looking For • Previous professional welding/fabrication experience, • Experience with MIG/GMAW required; TIG/GTAW experience is a plus, • Able to independently set up and adjust welding equipment, • Able to read blueprints, weld symbols and dimensional drawings, • Experience fitting, tacking and welding fabricated assemblies, • Comfortable using measuring tools and checking your own work, • Able to identify common weld defects and make adjustments, • Experience with grinders, drills, saws and other fabrication tools, • Basic shop math, • Comfortable working in an industrial manufacturing environment, • Dependable attendance and stable work history, • Willing to help outside your immediate assignment when production needs it The Person Who Will Do Well Here We are looking for someone who takes pride in their work, shows up every day, works well with others and does not have a “that’s not my job” mentality. Quality matters. Safety matters. Attitude matters. This is a good opportunity for a welder who wants a long-term home with a company that values people who are dependable, coachable and willing to grow. Physical / Work Environment • Manufacturing environment with welding arcs, sparks, heat, fumes, oils and loud noise, • Regular standing, walking, bending, reaching and working in different welding positions, • Regular lifting up to approximately 40 lbs., • Occasional lifting up to approximately 50 lbs., • PPE required

Job Description About Us: Kenney Industries is a growing Job Shop manufacturer specializing in high-quality metal fabrication and custom projects. We're looking for a skilled Welder to join our team and contribute to delivering precise, durable work in a safe and collaborative environment.Job Summary: We are seeking a skilled and reliable Welder to fabricate, assemble, and repair metal components using MIG, TIG, and other welding techniques. The ideal candidate will have strong attention to detail, a commitment to safety, and the ability to read blueprints to produce high-quality welds that meet project specifications.Key Responsibilities:Read and interpret blueprints, sketches, and technical drawings to determine layout and welding requirements.Set up and operate welding equipment (MIG, TIG, stick/arc, etc.) to join, fabricate, or repair metal parts.Prepare materials by cutting, grinding, cleaning, and assembling components.Perform welds in various positions (flat, vertical, overhead) on materials like steel, stainless steel, and aluminum.Inspect completed welds for strength, quality, and defects; grind or finish as needed.Maintain welding equipment and tools, performing routine maintenance.Follow all safety protocols, including wearing protective gear and ensuring a safe work area.Collaborate with team members on projects and meet deadlines efficiently.Requirements and Qualifications:Proven experience as a Welder (2+ years preferred), with proficiency in MIG and TIG welding.Ability to pass a welding test (e.g., MIG/TIG on steel or stainless).High school diploma or equivalent; welding certification (e.g., AWS Certified Welder) is a plus.Strong knowledge of welding safety standards and procedures.Excellent hand-eye coordination, physical stamina, and ability to lift heavy materials.Basic math skills for measurements and blueprint reading.Reliable, detail-oriented, and able to work independently or in a team.What We Offer:Competitive pay and benefits (health insurance, 401k, paid time off, etc.).Opportunities for overtime and skill development.A supportive team environment with modern equipment.

Job Description Position Summary Zoom Air, Inc. is seeking a skilled, detail-oriented, and dependable Welder to support fabrication and equipment operations. This role includes welding, fitting, fabricating, repairing, and modifying metal components and assemblies for HVAC rental equipment, piping systems, structural supports, skids, and related projects. The ideal candidate is safety-conscious, detail-oriented, able to read drawings and measurements accurately, and comfortable working in a fast-paced shop environment. Essential Duties and Responsibilities • Perform MIG, and Stick welding as required for fabrication and repair work., • Weld carbon steel, stainless steel, and other materials as assigned., • Fabricate metal components from drawings, sketches, measurements, and verbal instructions., • Measure, cut, fit, tack, and weld materials to required specifications., • Use saws, grinders, drills, plasma cutters, torches, and other fabrication equipment safely., • Inspect completed welds and fabricated assemblies for quality, accuracy, and proper fit., • Repair and modify HVAC rental equipment, piping assemblies, skids, frames, supports, and related components., • Assist with the fabrication of custom piping and equipment assemblies., • Maintain accurate dimensions, tolerances, and alignment throughout the fabrication process., • Perform grinding, cleaning, preparation, and finishing of welded components., • Assist with material handling, equipment loading, and general shop duties as needed., • Maintain welding machines, tools, and work areas in a clean and safe condition., • Follow company safety policies, procedures, and required PPE standards., • Report damaged tools, unsafe conditions, equipment concerns, or material shortages to a supervisor., • Work cooperatively with Fabrication, Shop, Rental, and Field personnel to complete projects on schedule., • Perform other duties as assigned. Qualifications • Previous welding and metal fabrication experience preferred., • Experience with MIG, and/or Stick welding., • Ability to read a tape measure and accurately perform basic shop math., • Ability to read and interpret fabrication drawings, sketches, and specifications., • Knowledge of welding procedures, joint preparation, fit-up, and fabrication techniques., • Experience working with carbon steel and stainless steel preferred., • Ability to use grinders, saws, torches, plasma cutters, drills, and other fabrication tools., • Ability to work independently and as part of a team., • Strong attention to detail and commitment to quality workmanship., • Dependable attendance and ability to meet production schedules., • Ability to follow verbal and written instructions. Physical Requirements This position requires the ability to: • Stand and walk for extended periods., • Bend, kneel, squat, climb, reach, and work in various positions., • Frequently lift and carry materials, tools, and equipment., • Safely lift up to 50 pounds independently, with assistance or mechanical equipment used for heavier loads., • Work around heat, sparks, welding fumes, noise, dust, and moving equipment., • Wear required personal protective equipment, including welding hood, safety glasses, gloves, hearing protection, safety-toe footwear, and other PPE as required. Work Environment This position is primarily performed in a fabrication and shop environment. Employees may occasionally be required to perform work outdoors or at customer/jobsite locations. Work may involve exposure to varying temperatures, welding fumes, sparks, noise, dust, and industrial equipment. Safety Expectations All employees are expected to: • Follow Zoom Air safety policies and procedures at all times., • Use required PPE., • Operate only equipment they are trained and authorized to use., • Maintain a clean and organized work area., • Immediately report unsafe conditions, injuries, or equipment concerns., • Perform work in a manner that protects themselves, coworkers, customers, and company property. Employment Requirements Employment may be contingent upon successful completion of applicable: • Pre-employment drug screening, • Background screening, • Employment eligibility verification, • Job-specific skills or welding testing Benefits Zoom Air, Inc. offers eligible employees a competitive benefits package that may include: • Company-paid employee health insurance, • Dental and vision insurance, • Life insurance, • Short-Term and Long-Term Disability, • SIMPLE IRA retirement plan, • Paid vacation, • Company uniforms, • Boot allowance, • Paid holidays Benefits are subject to eligibility requirements and current company policies. Equal Employment Opportunity Zoom Air, Inc. is an Equal Opportunity Employer. Employment decisions are based on qualifications, experience, performance, and business needs without regard to any status protected by applicable law.

Job Description POSITION SUMMARY The Tool Maker will operate band saw, sanders, grinders, drills, lathes, milling and boring machines to build and repair custom tools, molds, and trim fixtures that are used to manufacture a variety of products. The Tool Maker must be able to ensure quality standards are maintained for each tooling/mold, jigs and fixtures created as they are manufacturing tools and aids used to increase the reliability, accuracy and quality of the manufacturing process while minimizing production cycle times and improving worker safety. Shift- Monday-Friday- 5:00am-1:30pm CORE FUNCTIONS • Repair production tooling when necessary. Sand, drill vacuum holes, produce prototype from plastic sheet., • Band saw, table saw, powered sander, hand drill, drill press., • Experience in fabrication, • Repair production tooling and replace parts when necessary., • Weld and fabricate using measuring tools., • Shop equipment steel cutting saws., • Use welding skills with both mig and tig welder., • Create trim out fixtures and jigs for Production., • Build fixtures to fit each manufactured part which is vital for optimizing manufacturing processes, reducing scrap material, and improving accuracy and repeatability of processes, reducing the level of skill required to operate jigs and fixtures and increasing productivity., • Sand and hand polish new molds/tooling., • Use tool design skill set to design progressive dies utilized in production from vehicle parts without help from engineering., • Design of tooling frames and other structures for tooling. QUALIFICATIONS & REQUIREMENTS Education and Experience • High school diploma, GED, or equivalent experience is required., • Associate degree or related job experience is preferred., • Small press machine 2 years of experience, • CNC Programmer preferred, • 1-3 years of related experience required., • 3-5 years of related experience preferred. Required Licenses None. Skills, Abilities, and Knowledge • Skilled in operating band saw, sanders, grinders, drills, lathes, milling, and boring machines., • Skill to layout cavities to pour epoxy for production molds., • Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions., • Ability to deal with problems involving a few concrete variables in standardized situations., • Knowledge of the steps to follow to ensure proper surface quality, vacuum holes, and proper curing of the epoxy., • Knowledge of chemicals is needed to produce epoxy molds and trim fixtures from urethane. Travel None. COMPETENCIES • Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events., • Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; commits to long hours of work when necessary to reach goals. Completes tasks on time or notifies appropriate person with an alternate plan., • Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Meets productivity standards; completes work in timely manner; Strives to increase productivity; Works quickly., • Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly., • Balances team and individual responsibilities; Exhibits objectivity and openness to other views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Supports everyone’s efforts to succeed. SUPERVISOR RESPONSIBILITIES • Individual Contributor: working team member with no oversight of others and no management responsibilities. PHYSICAL REQUIREMENTS • This position is subject to Medium Work: Exerting up to 50 pounds of force occasionally and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Physical Activities • This position is subject to the following physical activities: climbing, balancing, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, crawling, talking, hearing, and repetitive motions. Visual Acuity • The worker is required to have close visual acuity to perform an activity such as preparing and analyzing data and figures; transcribing; viewing a computer terminal; expansive reading; visual inspection involving small defects, small parts and/or operation of machines (including inspection); using measurement devices; and/or assembly of fabrication of parts at distances close to the eyes. Working Conditions • The worker is subject to inside and outside environmental conditions, including heat, noise, vibration, and hazards from a production-based environment. Perks That Go the Extra Mile: At RealTruck, we take care of our people—because they drive our success. Enjoy great benefits like medical, dental, and vision coverage, company-paid life insurance and disability, and a 401(k) with company match (eligible the first of the month after you start). Need balance? We’ve got wellbeing days and parental leave. Want to grow? Take advantage of educational reimbursement. Plus, earn referral bonuses and score exclusive employee discounts on RealTruck products. Great benefits. Great people. Even better careers. RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep®, Bronco® and off-road enthusiasts around the world. Globally headquartered in Ann Arbor, Michigan, RealTruck’s 6,000+ associates operate from 35+ facilities across four continents. RealTruck’s leading product portfolio, which includes the Husky Liners total vehicle protection brand, boasts over 1,000 patents and pending applications. The company’s omni-channel retail approach delivers a seamless consumer experience online at RealTruck.com, as well as through its 12,000+ dealer network and automotive (OEM) partnerships.

Job Description Commercial / Industrial Pipe Welder & Fitter H&G Systems | Dallas-Fort Worth, TX Starting at $35+/Hour | Full-Time | Year-Round Work Build Your Career with a Company That Values Skilled Tradespeople H&G Systems is seeking an experienced Commercial / Industrial Pipe Welder & Fitter to join our growing team in the Dallas-Fort Worth area. Since 1968, we've built a reputation for delivering quality mechanical construction and service projects throughout North Texas. Our teams support some of the region's most critical facilities, including healthcare campuses, manufacturing plants, data centers, and large commercial buildings. If you take pride in your craftsmanship, enjoy challenging projects, and want consistent year-round work with opportunities for advancement, we'd like to talk with you. Why Join H&G Systems? • Starting at $35+/hour, based on experience and qualifications, • Stable, year-round employment with a long-established contractor, • 90% employer-paid medical coverage and 25% dependent coverage, • 401(k) with 6% company match, • Paid Time Off plus 8 paid holidays, • Half-day holidays on Christmas Eve and New Year's Eve, • Tuition and book reimbursement for continuing education and trade development, • Opportunities for advancement into Lead Welder, Foreman, and Field Leadership roles, • Work on large-scale commercial and industrial projects throughout North Texas What You'll Do As a Commercial / Industrial Pipe Welder & Fitter, you'll be responsible for fabricating, fitting, and welding piping systems that support complex mechanical and industrial operations. Responsibilities • Layout, measure, cut, fit, assemble, and weld piping systems according to project specifications and drawings, • Perform high-quality stick welding, MIG welding, and related welding processes, • Verify fit-up, alignment, and weld quality to ensure compliance with project standards, • Read and interpret blueprints, piping schematics, and isometric drawings, • Install, modify, and repair piping systems in commercial and industrial environments, • Coordinate with project managers, foremen, and field personnel to maintain project schedules, • Follow all company safety procedures and OSHA requirements, • Maintain high standards of workmanship, productivity, and professionalism on job sites What We're Looking For Required Qualifications • Commercial or industrial pipe welding and fitting experience, • Current 6G Welding Certification, • Proficiency with stick welding (SMAW) and MIG welding (GMAW), • Ability to read and interpret blueprints, piping drawings, and isometrics, • Strong understanding of pipe layout, fit-up, and installation practices, • Valid driver's license with an insurable driving record, • Ability to work safely and independently in active industrial and commercial environments Preferred Qualifications • Experience with carbon steel, stainless steel, and process piping systems, • Experience working on healthcare, manufacturing, industrial, or mission-critical facilities, • Rigging, equipment setting, or mechanical installation experience, • OSHA 10 or OSHA 30 Certification, • Previous leadership or foreman experience About H&G Systems For more than 50 years, H&G Systems has provided commercial and industrial mechanical construction and service solutions across the Dallas-Fort Worth market. Our continued success is built on skilled employees, quality workmanship, and long-term customer relationships. We invest in our people by providing the training, support, and career opportunities they need to build successful, long-term careers. Join Our Team If you're a skilled Pipe Welder & Fitter looking for a company that values craftsmanship, provides consistent work, and offers real opportunities for growth, we'd like to have a confidential conversation. Apply today and discover why talented tradespeople build their careers with H&G Systems. Must successfully pass a background check and drug screening following a conditional offer of employment. H&G Systems is an Equal Opportunity Employer.

Job Description We are seeking a Production Manual MIG/TIG Welders to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: • Manufacture and fabricate finished production pieces for the automotive/defense industries., • Follow blueprints to meet product specifications., • Calculate material measurements to verify specifications., • MIG/TIG weld to customer specifications and tolerances., • Produce proper weld quality for customers specifications. Qualifications: • Previous experience in MIG/TIG welding and manufacturing, required., • AWS 1.1 Certification, preferred., • Previous experience in MIG/TIG welding fabrication, preferred., • Welding Certifications or degree programs, preferred., • Familiarity with welding tools and procedures., • Familiarity with engineering blueprints and schematics., • Ability to handle physical workload., • Ability to any shift and up to 6 days per week. Job Timing: • Available to start ASAP\nCompany Description R&E Automated Systems (www.reautomated.com) is the industry leader in Automotive Controls, Robotics, Joining, and Plant Maintenance. In addition, Engineering Services, including Mechanical, Quality, Simulation, and Service Part Stamping, Assembly, and Coating. R&E Automated Systems (www.reautomated.com) is the industry leader in Automotive Controls, Robotics, Joining, and Plant Maintenance. In addition, Engineering Services, including Mechanical, Quality, Simulation, and Service Part Stamping, Assembly, and Coating.

Job Description Now Hiring: Welder (TIG / MIG) Build a Career, Not Just a Job — Join Mestex At Mestex, we don’t just fabricate metal — we build long-term careers. Many of our employees have been with us for years (and even decades), and that longevity reflects the stability, respect, and opportunity we provide. We value skilled tradespeople, invest in safety and training, and offer steady work in a team-focused manufacturing environment. We’re currently seeking a Welder (Transport) with TIG and MIG experience who takes pride in craftsmanship, quality, and teamwork. If you’re looking for consistent work, opportunities for overtime, and a company that truly values experienced welders, Mestex may be the right place for you. Why work at Mestex? • Proven stability with long-tenured employees, • Competitive hourly pay based on skill level, • Overtime opportunities available, • Quarterly attendance-based bonuses, • Discretionary performance bonuses for exceptional contributions, • Comprehensive benefits package, including health coverage, 401(k) with company match, and profit sharing, • Paid holidays, including floating holidays, • Company-provided uniforms, • Safety-first, clean manufacturing environment, • Modern equipment and established welding procedures, • Clear skill progression and advancement opportunities, • A team culture where craftsmanship, accountability, and professionalism matter Essential Duties and Responsibilities: Operational (TIG / MIG Welding) • Perform TIG and MIG welding on carbon steel, stainless steel, and aluminum (as applicable), in flat, horizontal, vertical, and overhead positions., • Set up welding equipment, including:, • Welding machines, torches, wire feeders, gas flow, and amperage settings., • Interpret blueprints, shop drawings, and weld symbols to determine weld size, location, and sequence., • Prepare materials for welding by:, • Cutting, fitting, grinding, beveling, and aligning components., • Execute proper welding techniques to ensure:, • Adequate penetration, • Clean bead profile, • Structural integrity, • Perform fitting and tack welding to ensure proper alignment prior to final weld., • Operate related fabrication equipment such as:, • Horizontal and vertical band saws, • Grinders and pipe cutting/threading equipment, • Adjust welding parameters as required based on material thickness and type., • Collaborate with supervisors, leadmen, and quality personnel to resolve fit-up or weldability issues., • Support production schedules while maintaining quality standards. Quality & Documentation • Ensure all welds meet company quality standards, weld procedures, and applicable codes., • Conduct visual inspections of welds for:, • Cracks, porosity, undercut, incomplete fusion, and distortion., • Verify measurements using precision tools to ensure dimensional accuracy., • Accurately record time, labor, and work order information in accordance with payroll and job-costing procedures., • Complete required production, inspection, and non-conformance documentation when applicable., • Maintain traceability of welds and materials as required by job or customer specifications., • Follow approved Welding Procedure Specifications (WPS) and assist in qualifying or validating procedures when needed., • Participate in skills assessments, certifications, and re-certifications as required., • Immediately report quality concerns, defects, or deviations to the supervisor or welding lead. Maintenance & Safety • Adhere strictly to safety, environmental, and PPE requirements in the welding and fabrication environment., • Inspect welding equipment, tools, and safety devices prior to use to ensure proper operation., • Perform basic preventive maintenance, including:, • Cleaning torches and liners, • Replacing contact tips, nozzles, and consumables, • Properly handle and store:, • Gas cylinders, • Welding rods, wire, and consumables, • Maintain work area cleanliness and organization to exceed housekeeping standards., • Safely operate overhead cranes, hoists, and lifting devices when required., • Follow lockout/tagout, hot work, and confined space procedures as applicable., • Report unsafe conditions, equipment issues, or incidents immediately., • Support continuous improvement initiatives related to safety, efficiency, and quality. Position Requirements: • 2-3 years hands on welding experience., • Knowledge of basic math skills., • Ability to read drawings and blueprints. At Mestex, the welds you perform support HVAC and industrial equipment used nationwide. We believe in doing quality work the right way — and recognizing the skilled welders who make it happen every day. If you’re ready to work for a company that values reliability, experience, and long-term commitment, we’d love to hear from you.

Job Description Company Overview At Ambo Properties, we don’t just manage real estate — we lead with purpose. As a fast-growing, mission-driven property management and investment company, we’re committed to providing high-quality, affordable housing while fostering thriving communities. Our culture is people-first, performance-driven, and growth-focused. Our employees voted us “Best for Work-Life Balance & Team Culture” — because we invest in our teams the same way we invest in our properties: with excellence, support, and long-term vision. About the Role: Welder We are seeking a skilled and safety-focused Welder to join our team. In this role, you will be responsible for setting up, operating, and maintaining welding equipment to fabricate, join, and repair metal components according to project specifications and blueprints. The ideal candidate has strong attention to detail, a solid understanding of metallurgy, and a commitment to quality craftsmanship and workplace safety. The ideal candidate will bring 2+ years of experience and strong operational knowledge. Key Responsibilities: Read and interpret blueprints, technical drawings, and job specifications to plan layout and procedures. Set up, operate, and maintain welding equipment (e.g., MIG, TIG, Stick, FCAW). Inspect, measure, and align metal components using calipers, rules, and clamps prior to welding. Execute clean, precise, and structurally sound welds across various metals and thicknesses in horizontal, vertical, or overhead positions. Perform post-weld tasks such as grinding, cleaning, and inspecting finished joints for flaws or defects. Operate shop tools, including angle grinders, plasma cutters, and saws safely. Adhere strictly to all safety guidelines, protocols, and proper Personal Protective Equipment (PPE) standards. Maintain a clean, organized, and safe work environment. What We’re Looking For Proven experience as a Welder (2+ years preferred). Proficiency in MIG, TIG, or Stick welding techniques and equipment operation. Strong ability to read and interpret technical drawings, blueprints, and welding symbols. High school diploma or equivalent; completion of a trade school or apprenticeship program preferred. Active AWS welding certification (or willingness to obtain certification) is a plus. OSHA 10-hour or safety training certification is a plus. Strong physical dexterity, hand-eye coordination, and ability to lift up to 50 lbs. Physical Requirements Ability to walk the property daily and perform inspections Lift up to 50 lbs occasionally Tasks may require kneeling, bending, and stair climbing Compensation & Benefits Competitive salary (based on experience) + performance bonuses Health, dental, and vision insurance Paid time off and sick leave Leadership training and internal promotion opportunities A team-first, solution-oriented culture that supports your growth Direct impact on community success and resident experience

Job Description Build Infrastructure That Lasts At Thompson Pipe Group, a family-owned team of engineers, contractors, and manufacturers based in Rialto, CA, we design and produce some of North America’s most diverse drainage, sanitary, pressure, and trenchless pipe systems. Explore our work at www.thompsonpipegroup.com. Role Snapshot We’re hiring a Welder II who specializes in repairing and validating spirally welded cylinders. Your craft ensures each cylinder meets dimensional tolerances and performance specs before moving forward. A Day in the Life • On 1st shift (5:00 AM–5:00 PM) or 2nd shift (5:00 PM–5:00 AM), with weekends as needed, you begin with safety checks and a review of work orders., • Inspect the interior and exterior of each spiral-weld cylinder for weld and base-metal discontinuities and dimensional accuracy., • Use air carbon arc gouging to remove defects and prepare joints for rewelding; square ends with an oxy‑acetylene torch and finish with grinders., • Execute flux‑cored weld repairs that comply with AWWA C200 and specific job requirements., • Record all repairs and dimensions precisely to the 1/32 inch., • Perform light maintenance on welding gear and keep your station organized and hazard-free., • Work under general supervision and report to a crew leader and/or supervisor. Must‑Have Qualifications, • Air carbon arc gouging proficiency (required—this is not just a plus)., • Pass a 3G test with back gouge and back weld using the FCAW process., • Demonstrated ability to weld to ASME Section VIII, UW‑51 (100% RT X‑Ray) acceptance criteria and sustain a 92% acceptance rate., • Experience with flux‑cored welding; SMAW and SAW experience is a plus., • Comfort reading blueprints and setting up production welding., • Able to follow instructions delivered in written and verbal formats. Tools & Technologies, • MIG, TIG, Stick, and Flux‑Cored Arc welders, • Oxy‑acetylene torch, hand‑held grinders, measuring tools Core Competencies, • Problem solving and innovation; solid judgment and continuous improvement mindset, • Organizational support; follows policies and aligns to company values, • Clear communication; reads, writes, presents data effectively; participates well in team settings, • Self‑management, dependable attendance, and flexibility Work Environment, • Exposure at times to fumes/airborne particles and electrical hazards, • Active production site with cranes, heavy equipment, and power tools, • Outdoor conditions with changing weather, • Confined or awkward spaces; work at heights (ladders, scaffolding, rooftops), • Loud industrial noise (e.g., metal forming operations, heavy machinery) Physical Requirements, • Frequent standing, walking, reaching, balancing, stooping, kneeling, and crouching; full range of motion required, • Repeated climbing of vertical ladders, • Lift/move regularly up to 25 lbs, frequently up to 50 lbs, and occasionally up to 100 lbs, • Apply 75 ft‑lbs of torque for assembly/dismantling/erection/installation of structures, tank jigs, scaffolding, etc., • Regularly swing a 10‑lb hammer, • Vision needs: near/far, color, peripheral, depth perception, and focus adjustment Reasonable accommodations may be made to enable individuals with disabilities to perform the job. Schedule & Location • 1st Shift: 5:00 AM–5:00 PM; 2nd Shift: 5:00 PM–5:00 AM; weekends as needed, • Work Location: In person What We Offer, • Top‑tier Medical, Dental, and Vision benefits, • Life and Supplemental Life insurance, • Company‑matched 401(k), • Paid Holidays, • Fun events, • Training and development, • Employee discounts, • Career growth opportunity Proficiencies, • Production welding setups, • Blueprint interpretation, • Air carbon arc gouging, • General welding proficiency Equal Opportunity EOE/AA – M/F/Vet/Disability Thompson Pipe Group – Pressure is an Equal Opportunity Employer Continue

Job DescriptionJob description: Job Overview We are seeking a highly skilled and motivated Welder specializing in MIG (Metal Inert Gas) and TIG (Tungsten Inert Gas) welding to join our dynamic fabrication team. This role offers an exciting opportunity to work on diverse projects, including metal fabrication, sheet metal assembly, and structural welding on construction sites. The ideal candidate will demonstrate exceptional mechanical knowledge, precision measurement skills, and adherence to safety protocols. Your expertise will contribute to delivering high-quality welded components that meet industry standards and client specifications. Duties Perform MIG, TIG, FCAW (Flux-Cored Arc Welding), and SMAW (Shielded Metal Arc Welding) using appropriate techniques for various metal materials including sheet metal and structural steel. Interpret blueprints, technical drawings, and mechanical fabrication plans to ensure accurate assembly and welding processes. Use measuring instruments such as calipers, micrometers, and shop math skills to verify dimensions and tolerances during fabrication. Operate power tools, plasma cutters, and machining equipment safely to prepare materials for welding or assembly. Follow safety protocols rigorously to maintain a secure work environment on construction sites and within fabrication shops. Assemble fabricated components accurately according to specifications, ensuring proper fit-up and weld quality. Maintain detailed records of welding procedures, inspections, and quality control checks in compliance with AWS (American Welding Society) standards. Qualifications Proven experience working on construction sites with a strong understanding of construction processes and safety standards. Demonstrated proficiency in MIG welding, TIG welding, FCAW, SMAW, and gas metal arc welding techniques. Ability to read and interpret mechanical blueprints, technical drawings, and construction plans effectively. Familiarity with measuring instruments such as calipers, micrometers, and hand tools essential for precise fabrication. Mechanical knowledge of metal materials including sheet metal fabrication and structural components. Experience with plasma cutting, machining, assembly, and using power tools in a fabrication environment. Strong understanding of AWS standards for weld quality and safety protocols adherence. Ability to perform shop math accurately for measurements and calculations related to fabrication tasks. Construction site experience is highly preferred to ensure seamless integration into project workflows. Bilingual a plus. Join our team if you’re passionate about delivering top-tier metal fabrication solutions with precision craftsmanship! This paid position offers the chance to develop your skills further while contributing to impactful projects across various industries. Work Location: In person

Job DescriptionJob description: Job Summary We are seeking a highly skilled and motivated MIG Welder to join our dynamic fabrication team. In this role, you will be responsible for performing precise welding operations primarily using Metal Inert Gas (MIG) techniques to assemble and fabricate metal components according to detailed blueprints and technical specifications. Your expertise will contribute to the creation of high-quality metal structures, ensuring safety, durability, and adherence to industry standards. This position offers an exciting opportunity for individuals passionate about metal fabrication, construction site experience, and mechanical craftsmanship to thrive in a fast-paced environment. Responsibilities Read and interpret mechanical blueprints, technical drawings, and fabrication shop drawings to determine welding requirements. Perform MIG welding (Gas Metal Arc Welding - GMAW) on various metal materials, including sheet metal and structural components, following AWS (American Welding Society) standards. Use measuring instruments such as calipers, micrometers, and shop math skills to ensure precise dimensions and fit-up of fabricated parts. Operate hand tools, power tools, plasma cutters, and machining equipment to prepare materials for welding and assembly. Adhere strictly to safety protocols while handling welding equipment, gas cylinders, and fabrication tools on construction sites or in shop environments. Fabricate components through cutting, assembly, and welding processes while maintaining quality control standards. Interpret technical drawings accurately and apply mechanical knowledge for effective fabrication and assembly of complex structures. Qualifications Proven experience working on construction sites with a strong understanding of construction processes and safety procedures. Skilled in MIG welding (GMAW), with additional experience in shielded metal arc welding (SMAW) and TIG welding preferred. Familiarity with blueprint reading, mechanical blueprint interpretation, and interpreting technical drawings related to metal fabrication projects. Proficiency with measuring instruments such as calipers, micrometers, and other shop math tools necessary for precise fabrication work. Hands-on experience with sheet metal fabrication, mechanical fabrication, plasma cutting, machining, and assembly processes. Knowledge of construction site safety protocols along with the ability to operate power tools and hand tools safely. Mechanical knowledge of metal materials including steel, aluminum, and other alloys used in construction projects. Ability to work independently or as part of a team in fast-paced environments while maintaining high-quality standards. Flux Core. Bilingual a plus. Join our team today if you’re eager to bring your welding expertise into a collaborative environment where craftsmanship meets innovation! Work Location: In person

Job Description We are hiring experienced MIG & TIG Welders for a metal fabrication and manufacturing facility in Garland, TX. We are looking for skilled, dependable welders with hands-on fabrication experience who can produce clean, accurate, quality welds in a fast-paced manufacturing environment. Location: Garland, TX Pay: Starting at $22.00+/hour, based on experience and weld test Schedule: Monday–Saturday + overtime as required 1st Shift: 6:00 AM–3:30 PM 2nd Shift: 2:30 PM–12:00 AM Job Responsibilities • Perform MIG and TIG welding on metal parts, components, and assemblies, • Set up and operate welding equipment safely and correctly, • Weld components according to specifications, work orders, and production requirements, • Read and follow blueprints, drawings, measurements, and fabrication instructions, • Use grinders, hand tools, power tools, and other metal fabrication equipment, • Measure, fit, align, and position components prior to welding, • Inspect completed welds for quality, accuracy, and proper penetration, • Identify and correct weld defects when necessary, • Maintain welding equipment and a clean, organized work area, • Follow all company safety procedures and PPE requirements, • Assist with additional fabrication and production duties as needed Requirements • Previous MIG and TIG welding experience required, • Previous experience in metal fabrication or manufacturing strongly preferred, • Ability to read blueprints, measurements, and fabrication drawings, • Experience using welding equipment, grinders, and other hand and power tools, • Strong understanding of welding techniques and safety procedures, • Ability to produce consistent, quality welds, • Ability to lift up to 35 lbs. and perform physical work throughout the shift, • Must wear required PPE and welding protection, • Reliable attendance and punctuality, • Must be available to work overtime and Saturdays as required, • Must be able to pass an on-site weld test\nCompany Description Bluecore Staffing is a premier Dallas-Fort Worth staffing agency specializing in warehouse, distribution, production, fulfillment, clerical, and professional staffing solutions. We are not a typical staffing agency. Our leadership team comes directly from warehouse, manufacturing, and operational backgrounds, giving us real-world industry experience and a hands-on understanding of what it takes to build successful teams. At Bluecore, we move fast, communicate clearly, and take pride in delivering elite customer service to both our clients and employees. We partner with some of the top operations across DFW and are continuously growing. Whether you are looking for your next opportunity or building a long-term career, Bluecore offers a professional, energetic, and team-driven environment with room for advancement. Warehouse | Distribution | Production | Fulfillment | Clerical | Professional Bluecore Staffing is a premier Dallas-Fort Worth staffing agency specializing in warehouse, distribution, production, fulfillment, clerical, and professional staffing solutions.\r\n\r\nWe are not a typical staffing agency. Our leadership team comes directly from warehouse, manufacturing, and operational backgrounds, giving us real-world industry experience and a hands-on understanding of what it takes to build successful teams.\r\n\r\nAt Bluecore, we move fast, communicate clearly, and take pride in delivering elite customer service to both our clients and employees. We partner with some of the top operations across DFW and are continuously growing.\r\n\r\nWhether you are looking for your next opportunity or building a long-term career, Bluecore offers a professional, energetic, and team-driven environment with room for advancement.\r\n\r\nWarehouse | Distribution | Production | Fulfillment | Clerical | Professional

Job Description We are seeking a skilled and experienced Welders to join our team, specializing in the fabrication of goods for the construction industry. The ideal candidate will have a strong background in metal fabrication, with the ability to work independently and as part of a team. All applicants will be required to go through our welding and fitting assessment using a MIG Welder and .045 wire, at our headquarters located in Dallas, Tx. You will need a welding hood and heavy welding gloves. Pay Rate: $17.00 - $23.00/HR depending on experience Essential Functions A Fitter, positions, aligns and fits parts according to specifications; fabricates heavy steel components by reading shop drawings and bills of material; performing welding operations using a variety of MIG welding equipment; verifies welding results; documents actions; maintains a safe work environment; keeps equipment operating smoothly; accomplishes manufacturing and organization mission. Job Functions • Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications using jigs, welding torches, and hand tools., • Verify conformance of workpieces to specifications, using squares, and measuring tapes., • Tack-weld fitted parts together., • Lay out and examine metal stock or workpieces to be processed in order to ensure that specifications are met., • Align and fit parts according to specifications, turnbuckles, wedges, pry bars, and hammers., • Locate and mark workpiece bending and cutting lines allowing for stock thickness, machine and welding shrinkage, and other component specifications., • Position or tighten braces, clamps, and/or bolt parts in position for welding., • Study engineering drawings and blueprints to determine materials requirements and task sequences., • Move parts into position, manually or by using forklifts, hoists and/or cranes., • Design and construct templates and fixtures, using hand tools., • Assist in straightening warped or bent parts, using sledges and/or hand torches., • Capable of lifting at least 50+ pounds Qualifications 2+ years in Steel Fabrication working as Fitter • Blueprint reading, • Hand tools proficiency, • Fabrication experience, • Basic math skills, • Welding knowledge, including MIG welding, • Familiarity with power tools, • Understanding of crane operation, • Knowledge of calipers and micrometers Benefits: • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Experience: • Fitting: 2 years (Required), • Metal fabrication: 3 years (Preferred), • Welding: 3 years (Preferred)

Job DescriptionJob description: Job Overview We are seeking a dedicated and skilled MIG Fluxcore Welder to join our dynamic fabrication and manufacturing team. In this role, you will be responsible for performing high-quality welding operations on various metal components, primarily utilizing MIG (Metal Inert Gas) and FCAW (Flux-Cored Arc Welding) techniques. Your expertise in sheet metal, pipe threading, and blueprint reading will ensure precision and adherence to safety standards. This position offers an exciting opportunity to contribute to large-scale construction, fabrication, and assembly projects, supporting the creation of durable structures and equipment. The ideal candidate is energetic, detail-oriented, and eager to bring their mechanical knowledge and welding skills to a fast-paced environment. Responsibilities Perform MIG welding using FCAW process on diverse materials including sheet metal, ductwork, and structural components Read and interpret blueprints, schematics, and technical drawings to accurately execute fabrication tasks Operate power tools, hand tools, plasma cutters, press brake machines, and other fabrication equipment safely and efficiently Use precision measuring instruments such as calipers and micrometers to ensure accurate cuts and welds Conduct rigging, assembly, and mechanical tasks involving pipe threading, soldering, and machining operations Maintain a clean and organized work area while adhering to all safety protocols related to construction site environments Collaborate with team members on projects involving crane operation, forklift handling, or other heavy equipment as needed Skills Extensive construction site experience with a strong understanding of safety procedures Proficiency in MIG welding techniques with a focus on FCAW; experience with TIG welding is a plus Ability to read blueprints, schematics, and technical drawings accurately Skilled in the use of hand tools, power tools, plasma cutters, press brake machines, and other fabrication equipment Knowledge of ASME codes & standards relevant to welding and fabrication practices Mechanical knowledge including pipe threading, assembly, rigging, soldering, and machining processes Familiarity with sheet metal work, ductwork fabrication, and construction-related welding applications in Sunnyvale, TX or similar environments Ability to perform basic math calculations essential for measurements and quality control in fabrication tasks Experience operating forklifts or other heavy machinery safely within a manufacturing or construction setting Bilingual a plus. This role is paid employment that offers an engaging environment where your skills directly contribute to impactful projects. We value energetic professionals who are motivated to excel in a collaborative team setting while maintaining high standards of quality and safety. Join us in building durable structures that stand the test of time!

Job Description Welder / Fabricator Join our team as a Welder / Fabricator specializing in custom-engineered industrial air handling units, dust collection systems, and containment enclosures. We specialize in custom-building equipment—ranging from dry cartridge collectors and baghouses to specialized wet dust collectors, downdraft tables, and mist collection systems—tailored to specific factory footprints and hazard profiles. Quick facts • Location: Onsite, • Pay: $22.00/hour, • Schedule: Monday–Friday, 6:00 AM – 2:30 PM, • Position type: Temp-to-Hire Why you’ll like this job • Consistent schedule with stable day-shift hours and standard weekday finish times., • Work on varied, custom-engineered equipment rather than repetitive assembly line work., • Opportunity to build skill sets across multiple welding techniques and custom metal fabrication projects. What you’ll do • Welding & Fabrication: Join, fabricate, and repair metal components or complete units using appropriate welding techniques based on blueprints, schematics, and job specs., • Quality Assurance: Inspect completed welds for structural soundness and ensure all completed parts meet strict fabrication specifications., • Process Coordination: Coordinate with small parts team and welding helpers to develop orders, and pass completed units to helpers for weld grinding and hole drilling prior to paint and final inspection., • Measurement & Layout: Accurately read measurements, determine square, and ensure precise fitments., • Documentation & Tracking: Record all worked hours on weekly timesheets and unit travelers, logging any modifications or missing parts into the traveler., • Cross-Department Collaboration: Work closely with supervisors, welding helpers, paint staff, and other departments to ensure timely and accurate completion of orders. What you need • Experience: 2–5 years of industrial metal fabrication and welding experience (or equivalent related background) recommended., • Welding Expertise: Recent hands-on experience with MIG and TIG welding processes, specifically working with galvanized and stainless steel materials., • Technical Skills: Proficiency in reading blueprints, schematics, and diagrams, along with knowledge of plasma arc cutting and core fabrication principles., • Blueprint & Layout Ability: Demonstrated ability to read precision measurements and verify squareness., • Supervision: Ability to work effectively under general supervision, reporting to the Welding/Paint Supervisor and Production Manager. PrideStaff (North Dallas location) is a locally owned staffing & placement firm with a strong reputation as a fun-loving, quality-focused service provider. Our employees enjoy the following: • A professional, supportive team environment, • Representation to North Dallas’ top employers, • Full medical benefits package, • Dedicated consultants who provide industry insights & resources to ensure continued career development These are some of the many reasons we were recently recognized as one of Dallas’ Best Places to Work! Proudly serving North Dallas, Addison, Carrollton, Farmers Branch, Las Colinas, Irving, Coppell, Lewisville, Plano, Richardson, Frisco, and McKinney

Allegiance Staffing - - Responsibilities: Perform Flux Core and MIG production welding; Read blueprints and weld symbols; Weld components to specifications; Inspect welds for quality and appearance; Safely operate a sit-down forklift.

PrideStaff - - Responsibilities: MIG aluminum welding on aluminum parts; Read blueprints/drawings and set up parts; Weld, fit, and assemble aluminum components; Inspect welds and dimensions; maintain safety and cleanup.

PrideStaff - - Responsibilities: Fit, weld, and assemble aluminum parts using MIG welding; Read basic drawings and set up parts; Examine work and measure pieces to ensure conformance; Clean and repair welds when necessary; Follow safety rules and maintain a clean work area.

MIG and/or TIG weld metal components and assemblies. This is a good opportunity for a welder who wants a long-term home with a company that values people who are dependable, coachable and willing to grow.

Fabricates, welds, and makes metal components for equipment or structures according to layouts, blueprints or work orders; uses, applies, and implements arc and gas welders, acetylene oxygen welding equipment, MIG welder, portable magnetic drill press, or cutting torch; adheres to safety standards a

In this hands-on role, you’ll set up equipment, perform MIG welds in flat, horizontal, and vertical positions, and inspect your work to help build hydraulic products our customers rely on.You’ll bring a high school diploma or GED and at least one year of welding experience, with demonstrated GMA

A leading mechanical and plumbing company is looking for a WELDER I - Manufacturing in Dallas, Texas. The role requires a high school diploma or GED along with certified MIG and SubArc welding skills and offers a competitive salary range of $20.

MIG WelderThe MIG Welder welds Galvaneal and stainless parts. Thorough knowledge of MIG welding processes, including advanced welding techniques in a steel fabrication environment, and of welding tools and equipment. Vo-Tech certification in welding process or minimum of 2 years MIG welding experien

We are hiring experienced MIG & TIG Welders for a metal fabrication and manufacturing facility in Garland, TX. We are looking for skilled, dependable welders with hands-on fabrication experience who can produce clean, accurate, quality welds in a fast-paced manufacturing environment.

Model Maker/ Welder– $20/Hour | Lewisville, TX.

This is a good opportunity for a welder who wants a long-term home with a company that values people who are dependable, coachable and willing to grow.

We are seeking a highly skilled and motivated Welder specializing in MIG (Metal Inert Gas) and TIG (Tungsten Inert Gas) welding to join our dynamic fabrication team.

Fluxcore/MIG Production WelderProduction Flux Core-MIG WelderLocation: Grand Prairie, TX Schedule: Monday–Friday, 6:00 AM–4:00 PM Pay: $22–$26/hour, based on experiencePosition SummaryWe are seeking an experienced Production Flux Core/MIG Welder to join a manufacturing team. Key Responsibiliti

Job Description TITLE: Prodution Maintenance Technician GENERAL DESCRIPTION: Perform maintenance and sanitation duties on the production line as required by the Standard Operating Procedures and Supervisor direction. ESSENTIAL DUTIES/RESPONSIBILITIES/FUNCTIONS: • Create and maintain all robot and automation controls programs for all equipment., • Implement automation opportunities for cost savings., • Maintain robotic, control systems, and safety control systems including PLC/PC controllers and industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus, motor control systems, servo drives, frequency drives, and electrical distribution systems., • Maintain all PLC and software, plant wide. Integrate existing and new equipment, as needed., • Identify, maintain, and troubleshoot Motor Controls, including motor starters, Variable Frequency Drives, DC drives, and standard electrical components., • Troubleshoot industrial electrical, including 480V 3-phase, 110 VAC, and 24VDC systems., • Assist in the mechanical maintenance of equipment, as needed., • Disassemble production filling equipment (remove fill valves, cylinders, hopper, supply hoses)., • Reassemble and set up production filling equipment (replace fill valves, cylinders, hopper, supply hoses) using hand tools., • Setup production lines for specific products (adjust fill volume, set cap height, set date code, and rail width)., • Learns and begins to develop personal knowledge of proper basic troubleshooting techniques to diagnose and repair mechanical, electrical and control system problems, • Safely use appropriate equipment for each repair (welder, hand tools, electrical meter, grinders, etc.), • Maintain plant equipment in a technically perfect condition as per SOP’s, Machine Service and Repair Manuals., • Log all work and wrench-time on daily work orders and/or in the CMMS, • Clean equipment as directed, using chemicals, spray hose, etc. after completing maintenance tasks., • Use company approved personal protective equipment (PPE) as required for various tasks., • Operate a scissor lift to change lamps in high bay fixtures, assist with installing electrical conduits in an overhead ceiling, etc., • Perform work in Permitted and Non-Permitted Confined Space, Inside Mixing vessels, Storage Tanks etc., • Order equipment parts using a parts requisition form and return to Maintenance Supervisor or Designated Parts Coordinator, • Work long hours and call-ins as needed., • Work in a safe manner always, complying with safety, health, environmental, food and drug regulations, GMPs and company policies., • Communicate corrective and preventive issues to managers and coworkers., • Cooperate with production personnel to ensure maximum quality and production., • Work cooperatively with co-workers and supervisors., • Maintain regular and punctual attendance at work., • All other duties and projects as assigned. QUALIFICATIONS & SKILLS REQUIRED TO PERFORM JOB DUTIES: • Mechanical ability., • Knowledge of Lockout/Tagout procedures., • Knowledge of pneumatics, hydraulics, mechanical and electrical., • Knowledge of MIG and TIG welding., • Knowledge of maintenance and repair of electrical, plumbing and HVAC., • Carpentry skills., • English reading ability for reading and understanding schematics, manuals, building plans, building codes and safety regulations., • Knowledge of building codes such as electrical, plumbing, and HVAC., • Ability to operate a forklift/scissor lift., • Ability to read and follow written instructions, reports, equipment manufacturer instructions and requirements., • Ability to follow verbal instructions., • Ability to use simple math to measure fill speed, fill rate, etc., • Ability to Communicate Clearly, • Willing and able to work long hours and off-shift., • Ability to properly use hand tools., • Ability to properly use measuring devices (tape measure, depth gauge, calipers, micrometers, etc.), • Willingness to perform tasks as required., • Ability to work with Supervision. PHYSICAL REQUIREMENTS TO PERFORM JOB DUTIES: • Lift up to 50 pounds from the floor level to shoulder height or visa-versa., • Stand for up to three hours at a time., • Visual acuity see set up, recognize problems, troubleshoot and make repairs., • Sit, bend, squat, reach, pull, twist, and turn., • Reach forward and overhead., • Manual dexterity skills to use hand tools, such as wrench, pliers, sockets, wrenches, socket sets, screwdrivers, etc., • Use of power equipment such as welder, hand tools, electrical meter, grinders, etc., • Able to use cleaning chemicals., • Good eye/hand coordination. EDUCATION AND/OR EXPERIENCE REQUIRED TO PERFORM JOB DUTIES: • High school diploma or equivalent., • Trade school or technical school training is preferred., • 1-2 years previous work experience in a manufacturing environment preferred., • 1-2 years mechanical experience., • Experience with diagnosing and troubleshooting is preferred., • Experience with preventative maintenance., • Experience with MIG and TIG welding., • Familiarity with high-speed packaging and filling equipment. Benefits Offered: • A competitive base wage, • Health, Dental, Vision and Life Insurance, • Pet Insurance and Various Supplemental Insurances, • Healthcare Spending (HSA) or Reimbursement Accounts (FSA), • 401k Retirement Plan, • Tuition Reimbursement Program, • Paid Holidays, generous PTO program (Vacation, Sick, Personal, etc.) Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Equal Employment Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability, genetic information, or any other characteristic protected by federal state or local laws. \nCompany Description Part of the Forever Living family of companies, Aloe Vera of America manufactures and distributes Forever Living products to over 150 countries. Forever's Aloe is carefully grown and cultivated in plantations in Mission, TX and the Dominican Republic, to our facility to produce the best products possible. An independent distributor of natural health and beauty products of Forever Living. The best sources for health and beauty and sharing them with the world. Our complete family of Aloe Vera drinks, skincare products, and cosmetics brings the remarkable properties of aloe to the entire body. Add that to our full line of nutritional supplements and products from the beehive, and you have a complete system for naturally achieving better health and beauty. Part of the Forever Living family of companies, Aloe Vera of America manufactures and distributes Forever Living products to over 150 countries. Forever's Aloe is carefully grown and cultivated in plantations in Mission, TX and the Dominican Republic, to our facility to produce the best products possible. An independent distributor of natural health and beauty products of Forever Living. The best sources for health and beauty and sharing them with the world. Our complete family of Aloe Vera drinks, skincare products, and cosmetics brings the remarkable properties of aloe to the entire body. Add that to our full line of nutritional supplements and products from the beehive, and you have a complete system for naturally achieving better health and beauty.

A Hiring Company is seeking a Welder/Maintenance Worker with 1–2 years of welding and metal fabrication experience. The role emphasizes MIG welding of mild and galvanized steel, plus fabrication using grinders, drills and metal cutting saws, and requires forklift operation within a manufacturing s

Apartment Management Consultants (AMC) is a leader in the property management industry.Our passion for helping people, creating authentic relationships, and common values has established a working environment that undeniably stands out.Every day our associates have the opportunity to collaborate tog

Home Depot - - Responsibilities: Load and unload trucks; Move material within the facility; Operate material handling equipment; Sort, stage, and transport products.

Responsibilities: Pull and stock inventory for orders; Complete orders; Stock and pull inventory from bins and shelves; Package and ship inventory; Clean and organize warehouse.

FleetPride - - Responsibilities: Provide customer service through delivery and/or pick-up of parts; Unload products from shipping vehicles and store in warehouse; Load materials into vehicle and secure for transport; Operate forklift to move materials between areas; Maintain logs and inventory in d

JobID: J3M2K96SZS0W5YDBCX9 [Material Handler / Freight Handler] As a Warehouse Associate at Capstone Logistics, you'll: Handle the movement of pallets and cases on and off trailers by using a forklift, pallet jack or by hand; Learn all aspects of receiving, unloading and loading operations.

Quirch Foods - - Responsibilities: Assist in maintaining accurate inventory records using inventory management software; Perform regular cycle counts and audits to ensure inventory accuracy; Coordinate with warehouse and logistics teams to manage inbound and outbound inventory transactions; Investi

Machine Operator/Pan Press Operator - 2nd ShiftThere's a reason Trinidad Benham is recognized as a leader in our industry.Trinidad Benham Corp has been in business for over 100 years, and we know a thing or two about providing stable employment and growth.The Pan Press Operator is primarily responsi

The CNC Mill Operator - Machinist at Thaler Defense Systems is a technical role responsible for the precision machining of high-performance aerospace and defense components.Working under the guidance of the Production Supervisor, this individual ensures that mission-critical parts meet exact toleran

A leading manufacturing organization is seeking a.This role is ideal for a skilled maintenance professional who enjoys troubleshooting, solving mechanical and electrical problems, and working in a fast-paced manufacturing environment.The Reliability Maintenance Technician will perform preventive and

Altium Packaging - 4525 Joseph Hardin Drive - Responsibilities: Operate blow-mold/PET/injection molding machines; Troubleshoot process problems; Perform minor maintenance on equipment; Inspect bottles and perform quality checks; Document daily production reports.

Pratt Industries - - Responsibilities: Operate production machinery safely and efficiently; Perform machine setup, operation, and cleanup; Maintain safety, housekeeping, and GMP compliance; Train and assist other operators and helpers; Complete production, safety, and quality reports accurately.

Responsibilities: Set up and operate the production machine; Operate and feed the machine safely and efficiently; Complete startup inspection and checks; Maintain clean, organized work area; Record production data and quality checks.

Abacus Corporation - - Responsibilities: Operate lamination machinery safely to meet production goals; Monitor machine performance and troubleshoot issues; Maintain accurate production and material records; Inspect products for quality standards; Minimize waste and maximize production efficiency.

Aerotek - JobID: JP-005854724 [Production Operator / Assembly Line Worker] As a Production Associate at Aerotek, you'll: Be responsible for pulling the order form to determine the required product for production; Pull the product from the warehouse and deliver it to the production floor; Perform wra

Crown Holdings - - Responsibilities: Operate production line equipment and ensure cans meet specs; Perform basic machine maintenance and lubrication; Inspect cans for defects to customer specs; Assist forklift/material handling and loading; Maintain housekeeping and complete area paperwork.