Trabajos parts driver en Los Angeles, CaliforniaCrear alertas

Job Description The primary role of the Road Mechanic (Commercial Driver) is diagnose and repair fleet and equipment in order to optimize the needs of the operations and minimize equipment down time. work schedule: Mon-Fri : 8am-6:30pm and every other Saturday Essential Responsibilities • Perform scheduled preventative maintenance (“PM”), DOT inspections and follow up repairs to the Class 6-8 trucks (light and heavy) in a mobile/filed environment., • Perform Road Services Calls., • Respond to call center dispatched unscheduled service and maintenance request., • Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment., • Diagnose, adjust, and repair various types of truck equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Air conditioning systems, fan clutches, Engine electronics, Power Steering systems, Engine (gas and diesel), Transmissions (manual and automatic), clutches, differentials, etc., • Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers and pressure gauges., • Use basic hand tools, precision instruments, as well as power tools, welding equipment, and jacks., • Accurately complete DOT forms and all other forms of documentation in timely fashion., • Road test vehicles to diagnose malfunctions or to ensure that they are working properly., • Work with a high degree of independence and manage own daily schedule., • Maintain a high level of productivity and be able to work within or close to most standard repair times., • Obtain parts from approved local and national vendors as necessary for the repairs to be performed., • Manage parts inventory and equipment provided on a service truck and perform periodic reconciliation., • Perform all work in compliance with organizational safety, health and environmental policies, and federal regulations, to include OSHA, EPA, and DOT., • Participate and complete all-in company required safety training., • Establishes and maintains good working relationships with assigned customers and vendors., • Communicate effectively both verbally and in writing., • Maintain company’s issued service truck, conduct safety checks and pre/post trip inspections REQUIREMENTS: • Minimum 3 years’ experience as a Diesel Technician on Class 6-8 type of vehicles., • Valid Driver’s license required. CDL-A preferred but not required., • High school diploma or and equivalent combination of education. Technical school is a pluls., • Must provide own hand tools that are adequate to perform job functions., • Excellent verbal communication skills. Ability to effectively communicate with customers and their drivers., • Proficiency in the use of Apple iPhone / mobile devices, navigation of mobile applications and use of email to document repairs and communication., • Willingness to work varied schedules and work outdoors / in the elements at customer yards/locations., • Demonstrated ability to work independently, multi-task and apply initiative., • Positive attitude, safety conscious, good instincts, and self motivation, • Excellent organizational skills and ability to balance a variety of tasks., • Proficiency in and ability to obtain certificates for DOT inspections and Air Brakes repairs Supplemental Information Universal Waste Systems, Inc. celebrates diversity and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status. This description is not intended and should not be construed to be an exhaustive list of all responsibilities, skills, effort, work conditions, and benefits associated with the job.

Job Description*If you have any questions or to connect with a recruiter while your application is being reviewed, please Text DFS2 to 317-597-8130* $5,000 New Hire Bonus, 50% after 30 Days and 50% after 180 Days Hours: 11am to 7:30pmDays: Tuesday - Saturday EOE, including disability/vets *If you have any questions or to connect with a recruiter while your application is being reviewed, please Text DFS2 to 317-597-8130* Cox Fleet keeps your fleet moving! Headquartered in Indianapolis, Cox Fleet has grown to become one of the largest fleet maintenance companies in the country. Cox Fleet is the leading provider of on-site mobile maintenance and repair services nationwide, offering mobile on-site fleet service for light medium, and heavy-duty trucks and trailers. Cox Fleet also services customers utilizing its 20+ nationwide service centers; each offering select services, such as accident repair, paint, refurbishment, and heavy mechanical repair. Supported by a 24/7 in-house call-center, Cox Fleet provides maintenance scheduled and unscheduled services to fleets anywhere, anytime. COX FLEET is currently hiring a Mobile Diesel & Trailer Technician will be responsible for performing licensed DOT inspections, Preventative Maintenance inspections, light and follow-up repairs, light mechanical/hydraulic/electrical and electronic diagnostics, and other duties as assigned. The Mobile Diesel & Trailer Technician can perform more advanced diagnostics and repairs under the supervision of a Sr Mobile Diesel Technician or higher. The Diesel & Trailer Technician continues to learn additional advanced mechanical skills and diagnostic techniques. A successful Diesel & Trailer Technician complies with all company policies and achieves high level performance metrics. Duties: • Perform scheduled preventative maintenance (“PM”), DOT Inspections and follow up repairs on light, medium and heavy-duty vehicles in a mobile/field environment., • Perform minor adjustment and repairs on various types of truck equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Fan clutches, Engine electronics, Diesel steering systems, Engines (gas and diesel), Transmissions (manual and automatic), Clutches, Differentials, etc., • Perform minor adjustment and repairs on various types of trailers equipment and systems including, but not limited to the following: aluminum and chem-lite, trailer brakes, air lines, auxiliary pumps and engines, liftgates, and brake chambers., • Diagnose, adjust, and repair various types of truck equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Air conditioning systems, Fan clutches, Engine electronics, Diesel steering systems, Engines (gas and diesel), Transmissions (manual and automatic), Clutches, Differentials, etc., • Diagnose, adjust, and perform repairs on various types of trailer equipment, and systems including, but not limited to the following: aluminum and chem-lite, trailer brakes, air lines, auxiliary pumps and engines, liftgates, brake chambers, welding, fabrication, replacement of panels, body, and framework., • Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers and pressure gauges., • Road test vehicles to diagnose malfunctions and to ensure that they are working properly., • Identify problems, determine accuracy and relevance of information, using sound judgment to generate and evaluate alternatives., • Independently manage parts inventory and equipment provided on company-issued service truck and perform periodic reconciliation., • Maintain and operate company-issued service vehicle, conduct safety checks, and pre-/post-trip inspections of vehicle., • Work with and listen effectively to clients and customers to assess their needs, providing information or assistance, resolving their problems, or satisfying their expectations., • Manage concurrent assigned tasks, making effective judgments as to prioritizing work related activities and time allocations., • Use hand tools, precision instruments, as well as Diesel tools, welding equipment, lift and jacks., • Document according to company standards and upload pictures of work performed, parts used, and all findings observed on Repair Orders (“RO”) using company-issued iOS device and our proprietary TRAIT application., • Accurately complete DOT forms and all other forms of documentation in a timely fashion., • Work with a high degree of independence and manage own daily schedule., • Maintain a high level of productivity and be able to work within or close to most Standard Repair Times., • Obtain parts from approved local and national vendors as necessary for the repairs to be performed., • Communicate with management and support team via email or phone to obtain approvals on repair estimates, retrieve purchase order numbers and/or discuss RO findings notes., • Perform all work in compliance with organizational safety, health and environmental policies, and federal regulations, to include OSHA, EPA, and DOT., • Maintain company issued service truck, conduct safety checks and daily pre/post trip inspections. Requirements: • High School Diploma/GED and 3 years’ experience in a related field. The right candidate could also have a different combination, such as any level degree/certification beyond a HS diploma/GED in a related discipline; or 5 years’ experience in a related field., • Possess and supply a set of hand tools necessary to perform required job duties., • Obtain Automotive Service Excellence (ASE) certification T8 (PMI) within eighteen (18) months., • This position follows regulations issued by the Department of Transportation’s (DOT) Federal Motor Carrier Safety Administration (FMCSA). Candidate must be able to successfully complete and pass a DOT-regulated pre-employment background screening and DOT physical prior to employment., • A current and valid DOT medical card with more than four (4) months remaining until its expiration may be submitted in lieu of a DOT physical. If the DOT medical card has four (4) months or less of validity remaining, a DOT physical will be required., • Due to interstate operating authority commerce regulations, candidates must be at least 21 years or older., • Safe drivers needed and 3 YR MVR review required; Candidate must hold a valid state-of-residence driver’s license, be able to obtain and maintain their Driver Qualification File. Preferred Certifications: • ASE T3 (Drivetrain) certification., • ASE T4 (Brakes) certification., • ASE T5 (Suspension) certification., • ASE T6 (Electrical and Electronic Systems)., • ASE T7 (HVAC) certification., • ASE 608/609 certification. Skills & Abilities: • Understand the implications of new information for both current and future problem-solving and decision-making., • Ability to lift, bend, climb, stand, and walk for long periods of time; ability to perform moderately heavy laboring work., • Ability to exert oneself physically over long periods of time without tiring, which may include performing repetitive tasks., • Communicates information (for example, facts, ideas, or messages) in a succinct and organized manner. Engages in effective two-way communication with individuals and groups., • Ability to determine the type of tools and equipment needed., • Ability to accurately judge which of several objects is closer or farther away from the observer, or the distance between an object and the observer., • Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. Why Cox Fleet? • Safe driving & Tech efficiency bonuses., • Safety Boots & Safety Glasses reimbursement., • Extreme weather gear (Cold & Hot)., • Uniforms provided with laundry service where available., • Take the service truck home daily (stop paying for gas!)., • Laptop & company cellphone provided., • Technical training provided to advance your career., • Dedicated career path – ‘Over 50% of our front-line managers are promoted from within’. Benefits: • Health, dental, vision insurance starts DAY ONE of employment., • 401(k) matching starts after 90 days, 100%-match up to 6% contribution and an additional 2% discretionary contribution by the company., • Accrue up to 200 hours (5-weeks) of Paid Time Off based on your tenure with the company., • Tuition Assistance/Reimbursement., • Adoption/Surrogacy assistance., • Pet Insurance., • Multiple ERG, diversity groups, and company paid volunteer hours., • Employee discounts on new vehicle purchases, cellphone plans, ridesharing, home/rental insurance, wellness/fitness incentives and much more. “Please note: This posting is for informational purposes only and does not constitute an official job application. To be considered for employment, all candidates must submit their application directly through official Cox careers website. Applicants who complete Applications that are received through third-party postings, social media, or other channels will be invited to submit an official Application through the company’s career site.” JOB R202682958

Job DescriptionDescription: DIESEL MECHANIC Department: Fleet & Maintenance Location: Long Beach, CA Office Hours/Days: 0700 - 1630 (M-F) Classification: Full-Time, Non-exempt Reports To Fleet & Maintenance Director Position Summary Ecology Auto Parts Inc. is looking to fill a role of a Diesel Mechanic. As our new Diesel Mechanic you will perform diagnosis and preventive maintenance services as well as inspect, diagnose and repair on a variety of heavy-duty Diesel vehicles and trucks and equipment. You will support all aspects of the mechanical repair and maintenance of vehicles, machines, equipment and facilities. You will report to the local shop manager. Responsibilities To perform this job successfully you must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. • Performs repairs and assigned preventive maintenance services., • Performs inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment., • Works under limited supervision and selects from written instructions and established procedures to accomplish assigned tasks., • Maintains a clean, safe work area in compliance with Company / OSHA Standards and performs all work in accordance with established safety procedures., • Utilizes vehicle computer electronics systems to interpret failure modes to initiate or assign repairs., • Estimates time and material costs on vehicle repairs and requisitions new parts., • Performs service calls for emergency breakdowns., • Conducts annual safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times., • Assist other mechanics in the completion of project work., • Reviews, completes or assigns repairs identified on Driver Vehicle Inspection Reports. Requirements: Qualifications/Knowledge/Critical Skills • Experience: Three (3) years of relevant work experience., • Valid driver’s license, • Must be at least 18 years of age., • Legally eligible to work in the United States., • High school diploma or equivalent., • Certification or diploma in automotive technology or a related field is preferred., • Proven experience as a diesel mechanic or a similar role., • Strong understanding of safety protocols and compliance standards., • Ability to read and interpret technical manuals and schematics., • Proficiency in using diagnostic tools and equipment., • Excellent problem-solving skills and attention to detail., • Ability to work independently and collaborate effectively in a team environment., • Strong time management and organizational skills., • Physical stamina and ability to lift heavy equipment. Physical Demands/Environmental Factors • Ability to perform physical requirements of the position with or without reasonable accommodations., • Successfully complete pre-employment drug screen, physical, and background check, which will include previous employment check, criminal history and motor vehicle record review., • Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc.) most of the workday;, • Required to exert physical effort in handling heavy objects most of the workday;, • Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements often, • Works under moderate supervision, • Requires lifting up to 50-75 pounds, pushing, pulling and bending, • Physical ability to lift up to 50-75 pounds Compensation The Diesel Mechanic position offers a highly competitive hourly range of $23 to $30 per hour. In addition to the wages, we provide a comprehensive benefits package that includes medical, dental, and vision insurance, a 401k plan with employer matching, generous paid time off, and life insurance coverage. The final compensation package will be determined based on the candidate's relevant experience, qualifications, and skills. We are committed to offering a rewarding and competitive compensation package to attract top talent in the industry. PLEASE NOTE: This job description is not exhaustive and is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Ecology Auto Parts Inc. is committed to providing a workplace and culture of respect, diversity, equity, inclusion, and belonging. We are dedicated to ensuring equal employment opportunity without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. Should you have a disability or specific needs requiring accommodation, please inform us. Thank you for your interest in opportunities with Ecology Auto Parts, Inc. We appreciate the enthusiasm and professionalism demonstrated by individuals seeking to join our team. Please be advised that Ecology Auto Parts, Inc. does not engage with or entertain solicitations from third-party recruiting firms for our hiring needs. We have a dedicated internal recruitment team managing our talent acquisition process. We kindly request that third-party recruitment firms refrain from submitting candidates for our open positions. Ecology Auto Parts, Inc. will not consider or entertain candidates represented by headhunter agencies for our current requisitions. Our commitment to fair and equitable hiring practices includes working directly with candidates who apply through our official channels. We believe in fostering a transparent and direct relationship with potential team members. We appreciate your understanding and compliance with this policy. If you are interested in joining Ecology Auto Parts, Inc., please visit our official careers page here: EAP, Inc. | Career Center for a list of our current job opportunities and application instructions. Acknowledgement Employee signature below constitutes employee's understanding of the requirements, essential functions and duties of the position. Candidate/Employee Name (Print): Candidate/Employee Signature: _

The Field Service Technician - Coffee & Vending equipment is responsible for repairing and reconditioning equipment in the profit center and/or customer locations. Responsible for installation of equipment for customer accounts and is responsible for diagnostics of mechanical, electrical, and plumbing problems and takes corrective action. Provides customer assistance in resolving customer questions, problems, or complaints regarding equipment. First Class Vending, now part of Aramark Refreshments, has been Southern California's leader in vending and micro-market solutions for over 30 years. We deliver inspired break experiences through a full portfolio of snacks, coffee, tea, cold brew, and fresh food options, all tailored to meet the unique needs of our clients. Backed by Aramark's national scale and expertise, our local team continues to create welcoming spaces where employees and guests can recharge, connect, and enjoy a true sense of community. COMPENSATION: The Hourly rate for this position is $17.50 to $19.00. If both numbers are the same, that is the amount that Aramark expects to offer. This is Aramark's good faith and reasonable estimate of the compensation for this position as of the time of posting. BENEFITS: Aramark offers comprehensive benefit programs and services for eligible employees including medical, dental, vision, and work/life resources. Additional benefits may include retirement savings plans like 401(k) and paid days off such as parental leave and disability coverage. Benefits vary by location and are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works. For more information about Aramark benefits, click here _ There is no predetermined application window for this position, the position will close once a qualified candidate is selected. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all applicable laws, including, but not limited to all applicable Fair Chance Ordinances and Acts. For jobs in San Francisco, this includes the San Francisco Fair Chance Ordinance. • Calls on customers as assigned by Service Manager or General Manager to investigate operating difficulties of equipment. Diagnoses problems and figures out reasons and the nature of correction., • Makes repairs or adjustments to equipment to return the equipment in working order., • Cleans and maintains equipment on location including exchanging decanters and cleaning brewers., • Documentation including verification of the closing calls, invoice completion, asset verification and any required customer documentation, • Repairs and refurbishes equipment; maintain spare parts levels., • Ability to accurately collect work completed in company provided mobile device., • Maintains a good working relationship and liaison with customers to maintain a positive image of the company and product., • Perform scheduled and unscheduled service activities including emergency service calls, preventative maintenance, surveys, and installations., • Maintains service area and vehicle in a clean and organized condition. Follows company guidelines on safety and operates vehicle in a safe manner., • Completes weekly Driver Report and follows guidelines in the Fleet Manual., • Follows all safety standards and policies set by manufacturers and company. At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. • High School Diploma or GED required, • Solid understanding in repairing small electrical appliances., • Must be willing to learn how to connect equipment to water sources, add additional lines and drainage when vital., • Must be willing to learn how to work with copper, braided and pex lines. This skill is normally developed through six months to one year of experience in the equipment service operations or through vocational training., • The ability to read and write in English is required., • Must also possess effective communication and customer service skills., • Incumbent must have an acceptable driving record and a qualified driver's license. This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking & standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on , and .

Job Description Job Title: Delivery Driver and Warehouse Associate Pay Rate: $20/hour Schedule: Mon-Fri, 9:00 AM – 5:30 PM Job summary The Delivery Driver and Warehouse Assistant (Hybrid) is primarily responsible for executing delivery routes safely, accurately, and on time. In addition to driving responsibilities, this role will provide warehouse support as needed, including assisting with picking, staging, loading, and inventory handling. Limited Saturday warehouse rotation support will be required. Responsibilities/daily tasks • Perform standard delivery driver duties, including safe vehicle operation, timely deliveries, and professional customer service., • Assist in warehouse operations as needed: pulling parts, staging, loading, and organizing inventory., • Print and apply labels accurately., • Scan incoming and outgoing transfers with proper verification, documentation, and handling care., • Pull parts from appropriate bin locations and move to staging areas., • Return unused stock to correct bin locations., • Assist customers at will-call and ensure proper inspection and verification at pickup., • Conduct stock checks as required., • Receive defective or nonconforming parts, document accurately, and coordinate transfer to Quality Control., • Back up managing driver routing, delivery issues, and vehicle maintenance protocols., • Maintain a clean, safe, and organized work environment., • Follow all company policies, safety standards, and operational procedures. Qualifications • Ability to perform routine warehouse and delivery tasks using basic arithmetic and comprehension skills., • Ability to read and navigate bin locations and warehouse inventory systems., • Familiarity with auto parts or warehouse operations preferred., • Strong attention to detail and accuracy in task completion., • Ability to work cooperatively and communicate effectively with team members and customers., • Reliable, professional, and customer-focused demeanor., • Flexibility to work variable schedules, including weekends as required., • Valid driver’s license with acceptable driving record; ability to meet company driving requirements. \nCompany Description At United Employment Solutions, we are a rapidly growing team that prioritizes quality over quantity in every aspect of our business. Our foundation is built upon the core values of Honesty, Passion, Professionalism, and Respect, principles that are championed by every member of our staff and integrated into every department. We pride ourselves on maintaining a dynamic workplace environment where innovation is the heart of our success. We don't just accept new ideas; we actively thrive on them, and we encourage every employee to contribute their perspective, whether it’s a specific departmental improvement or a visionary concept for the entire company. Beyond a collaborative culture, we offer a comprehensive benefits package designed to support your well-being, including Medical coverage with company contributions, affordable Dental and Vision insurance, and company-sponsored Life Insurance. Our team also enjoys robust time-off benefits, including paid holidays, vacation pay, and five annual sick days. If you are looking for a professional home that values your voice and your growth, we invite you to come join our team! At United Employment Solutions, we are a rapidly growing team that prioritizes quality over quantity in every aspect of our business. Our foundation is built upon the core values of Honesty, Passion, Professionalism, and Respect, principles that are championed by every member of our staff and integrated into every department. We pride ourselves on maintaining a dynamic workplace environment where innovation is the heart of our success. We don't just accept new ideas; we actively thrive on them, and we encourage every employee to contribute their perspective, whether it’s a specific departmental improvement or a visionary concept for the entire company. Beyond a collaborative culture, we offer a comprehensive benefits package designed to support your well-being, including Medical coverage with company contributions, affordable Dental and Vision insurance, and company-sponsored Life Insurance. Our team also enjoys robust time-off benefits, including paid holidays, vacation pay, and five annual sick days. If you are looking for a professional home that values your voice and your growth, we invite you to come join our team!

Job DescriptionDescription: Professional Services Technician II Advanced Field Role Full-Time, Non-Exempt | Field-Based Compensation: $28 - $40 Per Hour; Based on Location, Experience, Knowledge, Skills, & Abilities The ideal candidate is located in/around the Atlanta territory. About VivoAquatics VivoAquatics is a national commercial aquatics company that manages the water, equipment, and compliance behind some of the most recognized pools and amenity spaces in the country. Our clients include luxury resort and hospitality brands, premium fitness chains, and large multifamily communities — properties where the pool isn't an afterthought, it's part of the guest experience. We pair experienced field technicians with VivoPoint, our proprietary water management and remote monitoring platform, so our teams show up informed and leave a clear record behind. Technicians are the front line of that promise. The Opportunity The Professional Services Technician II is our advanced field role. You'll own a route of recurring client visits at professionally managed commercial properties, and you'll independently diagnose and resolve issues across chemical automation, sensors, controllers, and circulation systems, install and commission VivoPoint feed systems, and take on new site launches, upgrades, and remediation work. A Technician II determines the root cause of issues, taking a proactive approach to problem solving, as well as recommendations to clients. This is a strong fit if you already have hands-on technical experience and want to build a specialized, in-demand skill set in commercial aquatics. It's also a good fit if you're in pool service today and want to move from residential or small-commercial work into large, professionally managed properties with real equipment, real standards, and real advancement. How We Onboard at This Level Every VivoAquatics technician completes our foundational qualification process, regardless of prior experience — it's how we guarantee consistency across markets, systems, and the standards our clients hold us to. For an experienced hire, that's an accelerated validation built around what you already know, and you'll be compensated from day one at a level that reflects the experience you bring. CPO certification is scheduled and fully covered by VivoAquatics as part of onboarding. What Defines This Role This role is built on doing the fundamentals consistently, at properties where consistency is key and then going further than the fundamentals when a site needs it. Most days begin with your route already built in VivoPoint, along with remote monitoring data telling you what each site looked like overnight. You'll move between properties — a resort pool complex in the morning, a fitness club and a multifamily community in the afternoon — and each stop follows a rhythm: review the data, walk the site, test the water, service the feed equipment, handle what's in scope, document the visit, and check out with the property contact. • Real diagnostics, not basic troubleshooting. You resolve intermediate issues across automation, instrumentation, and circulation without escalating., • Installation, not just repair. You install and commission VivoPoint chemical feed systems, not just service them., • Solutions, not just status. You bring the Professional Services Manager a diagnosis and a path forward, not just a problem., • Prevention, not just fixes. You identify patterns across sites and drive corrective action that reduces repeat failures. What You'll DoRoutine Service & Water Chemistry • Perform scheduled onsite visits for new and existing clients according to route schedule and contract scope, • Conduct chemical water testing and provide adjustment recommendations to keep bodies of water balanced, safe, and code-compliant, • Handle, transport, store, and apply pool chemicals safely and in accordance with company and site protocols, • Act decisively on out-of-range conditions, and recognize the smaller set of situations that genuinely warrant escalationAdvanced Diagnostics & Instrumentation, • Diagnose and resolve common and intermediate issues across chemical automation, sensors, and controllers, • Calibrate, verify, and troubleshoot probes and related instrumentation to maintain accurate readings and reliable automation, • Troubleshoot and repair VivoPoint-related systems, including controllers, modems, feed devices, tubing, and injectors, • Resolve the majority of field issues independently, escalating only genuinely complex or high-risk situations, • Work confidently with electrical and plumbing systems and power tools in equipment and pump roomsEquipment Maintenance, Installation & Projects, • Clean, inspect, calibrate, and maintain chemical feed equipment, • Perform installation, repair, and maintenance of VivoPoint chemical feed systems, • Perform repairs and maintenance on circulation systems in addition to pumps, filters, and heaters, • Support new site launches, system upgrades, and remediation work from mobilization through completion, • Apply intimate working knowledge of the VivoAquatics warranty process to ensure parts and labor are handled correctlySite Performance & Estimating, • Identify recurring issues across assigned sites and recommend corrective actions that improve long-term performance, • Provide accurate parts and labor estimates covering both repairs and recommended improvements, • Anticipate risks to service continuity at high-visibility properties and raise them before they affect the clientDocumentation & Communication, • Record all service visit information in VivoPoint — manual readings, service orders, service reports, equipment profiles, and notes, • Capture photo documentation of jobsites, projects, and completed work, • Communicate directly with managers and billing regarding parts used, job completion, and follow-up needs, • Coordinate with the Professional Services Manager on priorities, site status, risks, and recommended technical solutions, • Interface professionally with property engineering and management teams, explaining technical findings in deliverable way to the clientTeam Support, • Provide informal field support, coaching, and technical guidance to Junior Technician’s, • Share diagnostic approaches and site-specific knowledge that strengthens the wider team, • Assist on larger installations and projects, including parts and equipment pickup and general jobsite support, • Supervisory responsibilities: None — may provide informal field guidance to Junior Technician’sProfessionalism & Site Presence, • Model PPE compliance, safe chemical handling, and professional site conduct at all times, • Represent VivoAquatics professionally on client properties, working alongside engineering, housekeeping, lifeguard, and management staff in a professional & respectful manner, • Maintain thorough working knowledge of each management company's and property's policies and site-specific requirements, • Keep your assigned company vehicle clean, organized, and current on its service schedule, • Manage parts and equipment inventory on your vehicle; pick up materials from supply houses as needed, • Attend required meetings and training sessions Requirements:What You Bring • Strong knowledge of commercial water chemistry and balancing, with the judgment to act decisively on out-of-range conditions, • Strong working knowledge of circulation, filtration, and chemical automation systems, • Demonstrated ability to diagnose and resolve most issues without escalation, • Comfort and competence with electrical and plumbing systems and the use of power tools, • Sound estimating judgment — you can scope a job and price it accurately, • Strong interpersonal and customer communication skills — you'll interact directly with property engineers, general managers, and management teams, • Clear written and verbal communication with clients, managers, and billing, • High attention to detail and strong organizational habits; accurate documentation matters as much as the repair itself, • Solid computer and mobile device skills (MS Office / Google Workspace or similar) and comfort learning a new software platform, • Self-direction and reliability — you'll manage your day in the field with limited direct oversight, • A mentoring instinct and the professionalism to represent VivoAquatics on premium propertiesExperience & Requirements, • 2–4 years of experience in commercial aquatics or a comparable technical field preferred. We also welcome candidates from adjacent trades — pool service, facilities or building maintenance, HVAC, plumbing, irrigation, water treatment, or military technical roles — who bring comparable diagnostic depth and are ready to specialize, • CPO (Certified Pool Operator) certification required within the first 90 days of employment; scheduled and fully covered by VivoAquatics during onboarding, • Valid driver's license and a driving record that meets company insurance standards, • Ability to lift and carry up to 75 lbs, work on your feet, and access equipment rooms, pump rooms, and pool decks, • Comfortable working outdoors in seasonal conditions and in mechanical spaces, • Availability for early morning, weekend, or on-call coverage depending on market and client needs, • Ability to Travel up to 50%, including weekends, overnight, & holidays., • Must be over the age of 21 and have a valid driver's license that has been valid for at least two years, • Ability to pass a full background check including a driver history report What We Offer • Competitive hourly pay based on experience, tier, and market, • Company vehicle, fuel card, tools, uniforms/uniform allowance, and PPE, • Paid certifications and ongoing technical training, • Health, dental, vision, STD/LTD, Life, Pet Insurances, • Paid vacation, sick and floating holidays; holiday pay; 401(k), • Employee Referral Program, Employee Discount Program, Employee Assistance Program, • A defined advancement track in a fast-growing national company

Job DescriptionDescription: At First Choice Coffee Services, we’re on a mission to fuel workplaces across the nation with unbeatable customer service and top-quality office coffee solutions. For nearly 50 years, we've proudly served businesses throughout the U.S., delivering premium coffee experiences right to their break rooms. We're currently seeking a Service Technician to join our growing team! If you're energized by a fast-paced environment and have a passion for delivering great service, we’d love to hear from you. Why Join Us? • Be part of a trusted, established company, • Enjoy a supportive, team-oriented work culture, • Take pride in helping businesses stay fueled and focused Bring your drive, reliability, and commitment to excellence—and let’s brew success together! What you'll be doing – The Role: • Perform scheduled and unscheduled service activities on our coffee brewing equipment, including emergency service calls, preventive maintenance, installations, and equipment removals at customer locations., • Instruct customers on the proper use of coffee equipment, respond to inquiries from customers about coffee equipment, and communicate customer inquiries to appropriate First Choice staff., • Complete all service calls and related paperwork in an accurate and timely manner., • Maintain proper parts inventory for assigned service vehicle and inventory parts on a monthly basis., • Refurbish and repair coffee equipment for use at customer sites., • Prepare records such as service orders, product disbursement sheets, monthly inventory, and parts inventory in accordance with First Choice policies and procedures., • Ensure that assigned service vehicle undergoes routine maintenance as needed, obey all traffic laws, and maintain a valid driver’s license., • Assume route driver duties during vacation, extended leave, or other absence of regular branch delivery drivers; perform other deliveries as needed., • Maintain and clean the service area., • Receive, organize, and maintain parts for equipment. Want to see what the job is really like? Click on the following link to learn more about https://ebook.firstchoiceservices.com/ServiceTechnicianCandidates What’s in it for me? – The Benefits • Starting hourly rate of $20.00-$24.00, • Monthly Bonus Opportunities, • 401(k) and company matching, • Medical, Dental and Vision Insurance, • Employee Assistance Program, • Flexible Spending Account, • Life insurance, • Paid vacation and sick time, • 9 paid holidaysRequirements: What you’ll bring – The Person: • High school diploma or equivalent, • Past Experience is a plus, • Valid Drivers License, • Must be able to successfully complete and pass a Department of Transportation (DOT) physical examination and obtain and maintain a valid DOT Medical Examiner's Certificate, as required for the position. Daiohs USA is committed to providing all applicants and employees equal employment opportunities when it comes to hiring, job assignments, compensation, benefits, training, and all other work-related matters. Personnel decisions at Daiohs are made without considering someone’s legally protected characteristics, such as their race, color, religion, gender, gender identity or expression, pregnancy, sexual orientation, marital status, age, national origin, ancestry, citizenship, physical or mental disability, genetic information or characteristics, diagnosis or history of cancer, military or veteran status, or any other characteristic protected by applicable federal, state, or local law. #INDSTP

Job Description Overview Who we are— Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here’s what Transcat has to offer— • Work that matters., • A values-based culture where people care about each other and the work they do together., • Flexibility, • Training and development to accelerate learning and career advancement., • Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE!, • Hourly rate ranges between $28.00-$35.00 Summary- To provide onsite calibration of test equipment for customers between our Los Alimatos, CA and Fullerton, CA locations. Also, will have the opportunity to support the local Transcat laboratory when not traveling. Responsibilities Major Areas of Responsibility • Calibrate measurement and test equipment (M&TE) to manufactures specifications, • Determine out of tolerance conditions for customer M&TE and calibration standards, • Provide corrective action (i.e., adjustments, minor repairs) for out of tolerance conditions, • Update and maintain proper documentation of services, • Provide customer with information regarding other services and new equipment provided by Transcat, • Maintain calibration standards, • Provide feedback and updates regarding calibration practices and procedures, • Proficiency in submitting and updating required paperwork for travel and administrative purposes, • Other duties as assigned Travel Requirements • Combination of local travel, using company vehicle, and overnight travel, as needed Required Knowledge, Skills, and Abilities • Calibration experience and/or equivalent training with commercial and/or biomedical measurement and test equipment (M&TE), • Experience with heat treat and/or tensile frame, • Self-motivator requiring little or no supervision, • Customer service oriented, • Ability to interact with customers & coworkers in a professional manner, • Proficiency with MS Office and the internet; familiarity with basic database functionality, • 3+ years driving experience with a valid driver’s license and acceptable driver history, • Comfortable driving in all climates Education and Experience • Associate degree from college or technical school; or 2-5 years of related field experience and/or training; or equivalent combination of education and experience. Desired Experience/ Skills • Military PMEL training, • Strong attention to detail - able to follow written instructions., • Ability to plan and prioritize diversified workload and work independently with minimal supervision, • Excellent verbal and written communication skills. Qualifications Physical Demands These physical demands are representative of the physical requirements necessary for an employee to successfully perform the essential functions of the job. Reasonable accommodation can be made to enable people with disabilities to perform the described essential functions. While performing the responsibilities of the job, the employee is required to talk and hear. The employee is often required to sit and use their hands and fingers, to handle tools and equipment. The employee is occasionally required to walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl. • Required to stand for long periods of time (up to 8 hours per day), • Ability to lift 50 pounds and maneuver a 1,000-pound cart from unloading area to customer designated service area, • Occasionally will be required to lift upwards of 75lbs Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions and vibration. The noise level in the work environment is usually moderate. Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.

Clean Harbors Gardena, CA is looking for a Second Shift Mobile Vehicle Mechanic to join their safety conscious team! This position will be responsible for This position will be responsible for Camarillo, Fountain Valley, Riverside, San Diego and Sylmar counties routine maintenance, inspections, and repairing of all company fleet at branch locations throughout the area. This position in for 2nd shift 1pm-10pm Why work for Clean Harbors? • Health and Safety is our #1 priority, and we live it 3-6-5!, • Competitive wages, • Opportunity for increase after 90 days!!!, • Comprehensive health benefits coverage after 30 days of full-time employment, • Group 401K/RRSP with company matching component., • Opportunities for growth and development for all the stages of your career, • Generous paid time off!, • Company paid training!, • Tuition reimbursement!, • Company provided uniforms and PPE!, • State of the art facilities, technology, and tooling, • Access to company paid OEM certifications and trainings! Speak with a recruiter today to learn more!! RESPONSIBILITIES • Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times., • Correct all equipment deficiencies and perform preventative maintenance on company owned equipment as directed by management., • Ability to perform thorough inspection of equipment and identify unsatisfactory condition., • Full compliance with mandatory PPE requirements during all work-related activities and tasks, • Travel to other locations to perform repairs and maintenance on equipment as required., • Completes and submits all associated paperwork as required for tracking PM schedules., • Maintain active light duty or DQ driver status as per mobile vehicle type., • Performs other duties and tasks as assigned from time to time by management. QUALIFICATIONS What does it take to work for Clean Harbors? • High School diploma or equivalent required., • Valid driver's license and clean driving record., • 1+ years prior experience working on heavy duty-trucks and equipment., • 1+ years DOT inspection experience required., • Must be able to provide own basic tools., • Willingness to travel within assigned territory up to 70%., • Attention to detail., • Strong communication skills., • Ability to work flexible shifts including nights, weekends, and overtime as required., • Ability to determine vehicle condition by conducting inspections, scheduled PM's and diagnostic tests; identifying worn and damaged parts & replacement as needed., • Ability to pass a background, drug, and physical test upon hire. 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us at _. Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact _ or 1-844-922-5547. Clean Harbors and its subsidiaries are a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *CH

Job Description Job Description: • We are seeking a reliable CDL Box Truck Driver to deliver pallets of food and related products to local businesses, community centers, and retail customers., • The driver will be responsible for safe vehicle operation, accurate deliveries, and maintaining excellent customer service while representing our company in a professional manner., • Mon-Fri, • Weekly Pay, • Start time between 5am-7am, depending on routeDuties Duties: • Responsible for driving delivery trucks, • Deliver the company’s products over established routes or within an established territory., • Load or unload the merchandise at the customer’s place of business. Be able to load and unload items weighing 50 pounds., • Develop and maintain effective relationships between the Company and the customer., • Provide a positive representation of the company by demonstrating safe, responsible driving practices., • Have customers sign receipts for goods and receive payment for the merchandise if there is a cash-on-delivery arrangement., • Turn in receipts, payments, records of deliveries made, and any reports on mechanical problems with their trucks., • Perform and follow all Food Safety Modernization Act (FSMA) Section 111 (Code of Federal Regulations 21 CFR Parts 1 and 11) and Sanitary Transportation of Human and Animal Food guidelines set by Logistics Headquarters., • Assist in loading the trucks and arrange items for ease of delivery.Qualifications Qualifications: • 2 years of experience & Class B LicenseBenefits Medical, Dental, and Vision PandoLogic. Keywords: Class B Driver, Location: Torrance, CA - 90507 , PL: 604851176

Job Description Class A Driver – Equipment Transport for Quinn CAT • Pay: $25–$30 per hour, • Location: Carson Rental Branch Are you a safety-focused Class A Driver looking for a stable career with a respected company? Join our team and play a critical role in delivering and transporting heavy equipment while working independently and building valuable industry experience. This position offers the opportunity to work with a wide variety of equipment, develop specialized transportation skills, and be part of a team that values professionalism, safety, and customer service. What You'll Do • Safely transport equipment to and from customer locations and company facilities, • Operate company vehicles in compliance with all DOT and DMV regulations, • Perform pre-trip and post-trip inspections to ensure equipment and vehicle safety, • Load, secure, transport, and unload equipment using proper procedures, • Operate forklifts, pallet jacks, cranes, and other material handling equipment, • Provide basic equipment operation demonstrations to customers when needed, • Complete delivery paperwork, driver logs, permits, and transportation records accurately, • Perform routine vehicle maintenance and minor repairs when appropriate, • Plan efficient routes and maintain delivery schedules, • Participate in the DOT drug and alcohol testing program What We're Looking For • Valid California Class A Driver's License, • Current DMV Medical Certificate, • High school diploma or GED, • At least one year of driving experience or an equivalent combination of training and experience, • Strong commitment to safety and customer service, • Forklift certification is a plus, but not required Why Join Us? • Competitive hourly pay with opportunities for overtime, • Steady, year-round work, • Work with a variety of equipment and machinery, • Independent work environment with daily variety, • Opportunity to grow your skills and advance within the company, • Join a team that values safety, professionalism, and reliability Physical Requirements • Ability to lift up to 100 lbs occasionally, • Frequent standing, walking, reaching, and equipment operation, • Occasional climbing, kneeling, crouching, balancing, and crawling, • Ability to work outdoors in varying weather conditions Work Environment This position regularly works around heavy equipment, moving mechanical parts, and outdoor environments. Noise levels can be high, and safety awareness is essential at all times. If you take pride in safe driving, enjoy working with equipment, and want to build a long-term career with a growing company, we'd love to hear from you. Apply Today and do not miss out on this great opportunity! \nCompany Description Quinn Company is a Caterpillar dealership founded in 1919. The company sells, services, and rents a full line of new and used construction, agricultural, and material handling equipment, diesel and natural gas engines. As a Caterpillar Dealership, Quinn Company enjoys a unique ability to be a nimble company with entrepreneurial spirit and leverage the global reach and support of a Fortune 50 company... local and global at the same time. Quinn Company ranks among the top performing Caterpillar Dealers in the world. This competitive, performance based drive is the foundation of the company’s culture. www.quinncompany.com Quinn Company is a Caterpillar dealership founded in 1919. The company sells, services, and rents a full line of new and used construction, agricultural, and material handling equipment, diesel and natural gas engines.\r\n\r\nAs a Caterpillar Dealership, Quinn Company enjoys a unique ability to be a nimble company with entrepreneurial spirit and leverage the global reach and support of a Fortune 50 company... local and global at the same time. \r\n\r\nQuinn Company ranks among the top performing Caterpillar Dealers in the world. This competitive, performance based drive is the foundation of the company’s culture.\r\n\r\nwww.quinncompany.com

Consolidated Precision Products (CPP) in Cudahy is currently looking for a Driver/Shipping and Receiving Associate to join our team! This role will be reporting to our Operation Supervisor at our Aerospace Manufactory in Cudahy, CA. This is a great opportunity to join a growing company that has been in business for over 30 years! CPP offers a competitive compensation with heavy overtime opportunities, comprehensive benefits package which includes a quarterly bonus program, medical/dental/vision/life insurance, and 401k with employer match, paid vacation, sick time, and holidays. Hourly Rate: $22 - $25 DOE Must be able to work OT ESSENTIAL JOB FUNCTIONS/DUTIES • Deliver/Pickup parts and materials locally, • Prepares bills of lading or dray tickets for each shipment., • Checks and records all items loaded for shipment., • Upon completion of shipment, closes out orders and forwards document to production planning and accounting departments., • Maintains other shipping records such as goods returned, returnable pallets, dunnage, packing slips, etc., • Verifies goods received by checking and counting all items unloaded. Checks suppliers' count and reports discrepancies to carrier and to purchasing office and receives in the system accurately., • Collects information for damage claims on in-transit damage. QUALIFICATIONS • Education: High school diploma preferred but not required, • Experience1 year of experience preferred but not required., • Must have a clean driving record, • Bilingual – English/Spanish a Plus Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/. Sponsorship is not available for this role. Candidates must be legally authorized to work in the U.S. on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act. This is a full time position Pay Range:

Job DescriptionCompany description Terry Soot Management Group (TSMG) is a field data collection company founded in 2017 in Europe. We collect data where automation is not possible. We count features, take pictures, make videos, record speech, and scan areas for every detail you need to make more informed decisions. Our field data collection teams are spread across Europe and North America, ready to accept new challenges. Role Overview: The Autonomous Vehicle Test Operator is responsible for operating and evaluating a self-driving vehicle in autonomous mode, including collecting data and providing feedback, and offering ride hail service to the general public. Eligibility: • Must be at least twenty-one (21) years old, possess a valid Class C driver’s license, and have at least three (3) years of experience as a Class C licensed driver to operate Class C vehicles.Key responsibilities:, • Operate/Drive autonomous vehicles on both defined and undefined routes, including a variety of environmental conditions - driving (some manual driving but primarily monitoring the vehicle's behavior in autonomous mode) and (ii) software monitoring and logging responsibilities and providing verbal feedback/directions about the autonomous vehicles (AV) environment., • Test other aspects of our autonomous vehicles, • Complete timely and detailed ride reports for our operations and engineering teams, • Must be able to work specific shifts, including early mornings, evenings, and/or weekends, as well as overnight shifts, • Maintain high standard of safety, inside and outside of the vehicle.Necessary skills:, • Proficiency with a laptop and Office apps (i.e., Gmail, Sheets and Docs), • Proficiency using a handheld device/touchscreen smartphone, • Must have good attention to detail and be able to quickly and concisely describe their thoughts.Physical requirements:, • Occasional standing, walking, and long periods of sitting., • Use hands to finger; handle or feel; and talk or hear; climb stairs and/or ladders., • Occasionally required to reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl., • Must be able to occasionally lift and/or move up to 45 pounds., • Must use close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus., • Most work is accomplished outdoors in a vehicle. We would be happy to get to know you and your skills better and see how we can support each other's growth. Please apply and let's meet! We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Opportunity Information: \n\n \n Worldpac, a leading name in automotive parts distribution, is looking for a Delivery Driver/Warehouse team member to drive an established route(s) to deliver products and/or pick up returned merchandise from customers. Additionally, this position fulfills all shipping and receiving functions within the Branch. \n \n \n \n Who We Are \n \n \n \n Worldpac's well-respected, industry-leading business model, with a robust technology platform and comprehensive product assortment, is what differentiates us from our competitors. Our Team Members are the reason WORLDPAC has outperformed the industry for over 30 years with an unwavering commitment to our customers and suppliers. WORLDPAC fosters a sense of community, connection, and inclusion. \n \n \n \n \n \n Our team member’s value proposition includes competitive compensation and benefits, career path development, and a supportive work environment that encourages innovation, creativity, and personal growth. Worldpac is proud to offer all our team members a workplace that is both challenging and rewarding, with a commitment to enable each of them to achieve their full potential. \n \n \n \n \n \n What You Will Contribute at Worldpac \n \n \n \n • \n Uses vehicle to deliver orders or pick up returned merchandise in a safe and courteous manner. \n \n \n \n \n • \n Create and maintain records as needed. \n \n \n \n \n • \n Dispatch, confirm customer order and generate delivery manifests and receiving documents. \n \n \n \n \n • \n Sorts, organizes and prepares merchandise from receiving or the production areas to storage or to other designated areas, by part and quantity. \n \n \n \n \n • \n Ensure that customer orders are located, picked up and signed for. \n \n \n \n \n • \n Collects funds from customers if needed and maintains all necessary documents. \n \n \n \n \n • \n Other duties may be assigned. \n \n \n \n \n What You Should Have \n \n \n \n Education: High school/secondary school diploma or GED equivalent. \n \n \n \n Must-Have Skills: \n \n \n \n • \n Must be at least 18 years of age. \n \n \n \n \n • \n Eligible to work within the country in which you are applying \n \n \n \n \n • \n Must have a valid driver’s license with an acceptable motor vehicle record (MVR) per company standards. \n \n \n \n \n • \n Must meet all applicable state/province-specific driver’s license requirements prior to driving a company vehicle to perform delivery duties. \n \n \n \n \n • \n Has example of great customer service and “going above and beyond.” \n \n \n \n \n • \n Demonstrates strong attention to detail and critical thinking skills. \n \n \n \n \n • \n Has reliable attendance and is punctual. \n \n \n \n \n • \n Operates safely and can maintain a clean and neat work environment. \n \n \n \n \n • \n Ability to challenge upwards – respectful pushback. \n \n \n \n \n • \n Willingness to learn new skills and gain knowledge about all aspects of the Branch operations. \n \n \n \n \n • \n Ability to read and interpret documents such as safety rules, instructions and procedure manuals. \n \n \n \n \n • \n Ability and willingness to drive safely, adhering to all company safety standards. \n \n \n \n \n • \n Capable of safely operating equipment, such as forklift and pallet jack. \n \n \n \n \n • \n Consistent and reliable attendance. \n \n \n \n \n • \n Proficient in basic math skills. \n \n \n \n \n • \n Ability to use the computer and a handheld radio frequency device. \n \n \n \n \n • \n Effective verbal and written communication skills. \n \n \n \n \n Nice-to-Have Skills (but not required): \n \n \n \n • \n Familiarity with automotive parts. \n \n \n \n \n Physical/Work Environment Expectations: \n \n \n \n • \n While performing the duties of this job, the team member is regularly exposed to moving mechanical parts and occasionally exposed to high places, fumes, or airborne particles, and toxic or caustic chemicals. The noise level in the work environment is generally high (loud). \n \n \n \n \n • \n While performing the duties of this job, the team member is regularly required to stand, walk, use hands and fingers, reach with arms, talk, and listen. The team member is frequently required to stoop, kneel, and crouch and occasionally required to sit, climb, or balance. The team member must be able to regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, and ability to adjust focus. \n \n \n \n \n What Worldpac Provides to You \n \n \n \n Comprehensive Benefits Package (US Full-Time roles) \n \n \n \n • \n Health insurance plans, dental, and vision \n \n \n \n \n • \n Wellness incentives \n \n \n\n\n \n \n • \n 401(k) with employer match after 1 year of service \n \n \n \n \n Comprehensive Benefits Package (CAN Full-Time roles) \n \n \n \n • \n Extended health care, dental, vision, life insurance, and disability insurance \n \n \n \n \n • \n RRSP with employer match \n \n \n \n \n • \n Employee assistance program \n \n \n \n \n Beyond Your Day Job \n \n \n \n • \n Paid time off (full-time roles - package varies by role type) \n \n \n \n \n • \n Paid holidays \n \n \n \n \n • \n Annual Performance Reviews/Merit Increases (as eligible) \n \n \n \n \n • \n Empowering Career Growth and Success \n \n \n \n \n \n \n Worldpac expects to pay a base salary in the range provided on this job posting. Generally, we look to bring in candidates around the 50th percentile of the advertised range. However, this is never a guarantee. Within the range, individual pay will be determined by factors such as job-related skills, experience, and relevant education or training. \n \n \n \n United States Candidates: Worldpac is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, disability, or veteran status. \n \n \n \n \n \n Worldpac is committed to providing reasonable accommodations to qualified individuals with disabilities. If you require accommodations to perform the essential functions of the job, please contact recruitment@worldpac.com for assistance. \n \n \n \n \n \n Canada Candidates: Worldpac endeavors to make its recruitment process accessible to any and all users. Reasonable accommodation will be provided, upon request, to applicants with disabilities in order to facilitate equal opportunity throughout the recruiting and selection process. Please contact WORLDPAC Human Resources at dina.ivekic@worldpac.com to make a request for reasonable accommodation during any aspect of the recruiting and selection process. This contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications. \n \n \n \n \n \n \n \n \n \n \n\n Location Type: On-Site Pay Range: USD $17.00 - USD $22.75 /Hr.

Job DescriptionJob ID: 6361 Job Summary: As the Back Dock Shipping/Receiving Clerk and Driver, you will play a critical role in ensuring the smooth operation of our rental shipping and receiving department. Your responsibilities will primarily revolve around the shipping and receiving of camera dollies and related equipment, maintaining accurate inventory records, and providing excellent customer service. Additionally, you will be responsible for operating a delivery vehicle to transport equipment to various client locations and production sets. Responsibilities: Shipping and Receiving: Receive incoming shipments of camera dollies and accessories, checking for accuracy and inspecting for any damages. Prepare camera dollies and equipment for outbound shipments, ensuring proper packaging and labelling. Generate shipping labels, packing lists, and other relevant documentation. Coordinate with the logistics team to arrange pickups and deliveries with shipping carriers. Maintain a well-organized and clean shipping/receiving area. Customer Service: Assist customers with pickups and returns, ensuring a positive and professional experience. Address customer inquiries regarding shipping status, tracking information, and product availability. Provide product information and guidance to customers when necessary. Support internal and external audits by providing documentation and account analysis as needed. Act as an active listener, understanding customer needs and resolving any issues or concerns with empathy. Vehicle Operation and Maintenance: Safely operate a delivery vehicle to transport camera dollies and equipment to various client locations and production sets. Pick up and deliver manufacturing parts and supplies Follow all traffic and safety regulations while driving and ensure the proper loading and securing of equipment in the vehicle. Perform routine vehicle maintenance checks, such as checking oil levels, tire pressure, and ensuring cleanliness. General Support: Collaborate with the warehouse team in maintaining a clean and organized warehouse environment. Assist with equipment assembly, disassembly, and quality checks as needed. Utilize computer skills for data entry, inventory tracking, and communication with team members. Qualifications and Requirements: High school diploma or equivalent. Valid driver's license with a clean driving record. Previous experience in shipping/receiving, inventory management, or a related field is preferred. Ability to handle physical tasks, including lifting and moving heavy equipment. Familiarity with camera dollies and related film equipment is advantageous. Strong organizational and time management skills with attention to detail. Excellent communication and customer service skills, showcasing strong interpersonal skills. Computer proficiency for data entry and utilizing inventory management systems. Ability to work independently and as part of a team. Flexibility to work occasional evenings or weekends based on business needs. $23.00 - $28. hr.

Job Description Job Summary: As the Back Dock Shipping/Receiving Clerk and Driver, you will play a critical role in ensuring the smooth operation of our rental shipping and receiving department. Your responsibilities will primarily revolve around the shipping and receiving of camera dollies and related equipment, maintaining accurate inventory records, and providing excellent customer service. Additionally, you will be responsible for operating a delivery vehicle to transport equipment to various client locations and production sets. Responsibilities: • Shipping and Receiving:, • Receive incoming shipments of camera dollies and accessories, checking for accuracy and inspecting for any damages., • Prepare camera dollies and equipment for outbound shipments, ensuring proper packaging and labelling., • Generate shipping labels, packing lists, and other relevant documentation., • Coordinate with the logistics team to arrange pickups and deliveries with shipping carriers., • Maintain a well-organized and clean shipping/receiving area. Customer Service: • Assist customers with pickups and returns, ensuring a positive and professional experience., • Address customer inquiries regarding shipping status, tracking information, and product availability., • Provide product information and guidance to customers when necessary., • Support internal and external audits by providing documentation and account analysis as needed., • Act as an active listener, understanding customer needs and resolving any issues or concerns with empathy., • Vehicle Operation and Maintenance:, • Safely operate a delivery vehicle to transport camera dollies and equipment to various client locations and production sets., • Pick up and deliver manufacturing parts and supplies, • Follow all traffic and safety regulations while driving and ensure the proper loading and securing of equipment in the vehicle., • Perform routine vehicle maintenance checks, such as checking oil levels, tire pressure, and ensuring cleanliness., • General Support:, • Collaborate with the warehouse team in maintaining a clean and organized warehouse environment., • Assist with equipment assembly, disassembly, and quality checks as needed., • Utilize computer skills for data entry, inventory tracking, and communication with team members. Qualifications and Requirements: • High school diploma or equivalent., • Valid driver's license with a clean driving record., • Previous experience in shipping/receiving, inventory management, or a related field is preferred., • Ability to handle physical tasks, including lifting and moving heavy equipment., • Familiarity with camera dollies and related film equipment is advantageous., • Strong organizational and time management skills with attention to detail., • Excellent communication and customer service skills, showcasing strong interpersonal skills., • Computer proficiency for data entry and utilizing inventory management systems., • Ability to work independently and as part of a team., • Flexibility to work occasional evenings or weekends based on business needs. $23.00 - $28. hr.

Job Description Description Our Garden Group, providing sales support and logistics for both proprietary brands and other consumer recognized brands, is searching for a full time Merchandiser in Baldwin Park, CA. This position includes stocking and arranging the product displays, including grass seed, chemicals, and clay pottery, in home improvement centers of Lowe’s, Home Depot’s and WalMart stores. KEY RESPONSIBILITIES • Down stocking and maintaining set integrity for Central Garden grass seed, chemicals, bird feed, fertilizer and clay pottery, • Set and maintain the shelves according to retailer mandated planograms/modulars, • Install and maintain off-shelf display opportunities for Central Garden products, • Weekend consumer interaction during peak season (training provided) QUALIFICATIONS, • Previous merchandising experience preferred, • Strong communication skills needed to interact with store management and consumers, • Strong reading skills needed to understand packaging labels and re-tagging projects, • Must be able to bend, pull and lift 50 lbs. consistently throughout the course of a work day, • Must be able to climb ladders, use a pallet jack and hand powered tools, • Must have a valid driver’s license in the state in which you reside, a good driving record, reliable transportation and proof of current personal car insurance with you listed as an insured driver, • Must have daily access to internet/email, • Must have personal Smartphone with a current operating system: Android 13.0 or above, or Apple IOS 15.0 Octa-core 1.5 GHz processor, 8 GB Ram and 64 GB memory(Storage) above for daily communications with supervisor and app usage, • Responsible, reliable and dependable work habits, • Ability to work in a constant state of alertness and safe manner WORKING CONDITIONS, • Retail store environment – garden center and throughout retail store, • Work week is Monday - Friday and some weekends (primarily Saturday), • Must be able to bend, pull and lift 50 lbs. consistently throughout the course of a work day, • Must be able to climb ladders, use a pallet jack and powered hand tools, • Daily travel throughout territory may require driving time (personal car), • Remote POSITION INFORMATION, • This position pays $18.00 - $20.00 per hour depending on experience BENEFITS PACKAGE & EMPLOYEE PROGRAMS, • 401k with 3% company match, • Employee Assistance Program, • Discounts on cell phones, movie tickets, gym memberships, and more!, • Referral Program with cash bonus, • Access to on-demand pay Central Garden & Pet Company (NASDAQ: CENT) (NASDAQ: CENTA) is a leading consumer goods company in the pet and garden industries. Guided by the belief that home is central to life, the Company's purpose is to proudly nurture happy and healthy homes. For over 45 years, its innovative and trusted solutions have helped lawns grow greener, gardens bloom bigger, pets live healthier, and communities grow stronger. Central is home to a diversified portfolio of market-leading brands including Amdro®, Aqueon®, Best Bully Sticks®, Cadet®, C&S®, Farnam®, Ferry-Morse®, Kaytee®, Nylabone®, Pennington®, Sevin® and Zoёcon®. With fiscal 2026 net sales of $3.1 billion, Central has strong manufacturing and logistics capabilities supported by a passionate, entrepreneurial growth culture. The Company is headquartered in Walnut Creek, California, and employs over 6,000 people, primarily across North America. Visit www.central.com to learn more. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. #LI-FW1 We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionJob Summary We are seeking a highly skilled and proactive Fleet Supervisor to oversee and manage our fleet operations across two California locations. This individual will be responsible for the safe, efficient, and compliant operation of over 40 vehicles, ensuring our drivers and operations teams are supported with reliable transportation. The ideal candidate has hands-on knowledge of transit vans and box trucks, excellent organizational skills, and the ability to collaborate with both NorCal and SoCal management teams. Position is based in Van Nuys - Southern California with periodic travel to Alameda - Northern CaliforniaAs Kiva's Fleet Supervisor, you will... • Oversee a fleet of 40+ vehicles across California, ensuring operational readiness, • Schedule and coordinate regular preventive maintenance, inspections, and repairs to maximize vehicle uptime, • Maintain detailed and accurate records of all vehicle servicing, inspections, and compliance requirements., • Ensure adherence to California State and DCC regulations, • Develop and implement strategies to reduce fuel consumption and repair costs, • Utilize GPS and telematics systems to monitor driver behavior, vehicle utilization, and identify misuse, • Communicate regularly with management teams in NorCal and SoCal regarding vehicle availability, downtime, and maintenance planning, • Perform and oversee minor in-house repairs when necessary, • Coordinate with vendors and service providers for external maintenance and repair needs, • Travel periodically to Northern California to support fleet operations and team needsWhat we're looking for..., • 3-4 years relevant Fleet Supervisor experience., • Proven experience in fleet management or supervision, preferably in a multi-site environment., • Strong working knowledge of transit vans, box trucks, and related vehicle systems., • Hands-on mechanical ability to perform minor repairs and maintenance., • Familiarity with California transportation compliance requirements, including DCC regulations., • Proficiency in using fleet management software, GPS, and telematics systems., • Strong organizational, problem-solving, and communication skills., • Ability to develop cost-saving strategies and maintain a high standard of safety and compliance., • Valid California driver’s license with a clean driving record., • Experience in logistics, transportation, or cannabis distribution (preferred but not required)., • Ability to train drivers on vehicle use, safety, and compliance., • Strong vendor management and negotiation skills., • MUST be able to travel to Northern California 1 to 2 times a month Please note, we consider a number of factors such as internal pay parity, relevant experience/skills, geographic location, etc. Physical Requirements/Work Environment, • Must be able to lift, carry, push, or pull up to 50 pounds regularly., • Ability to stand and walk for extended periods., • Must be able to climb, balance, stoop, kneel, and crouch as needed., • Comfortable working in environments with variable temperatures and noise levels., • Must be able to operate standard warehouse equipment safely (e.g., pallet jack, forklift)., • Ability to drive or travel between worksites as required., • Must be able to load, unload, and move materials or equipment up to 50 pounds., • May require standing, climbing, or working outdoors in varying weather conditions. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Driver/Driver Trainee postion at South Gate & Vernon, CA Description The primary role of the Driver is to provide timely, efficient, safe and courteous hauling service to customers along an assigned route. Note: When working as the Driver Trainee, driver is learning essential responsibilities, knowledge, skills and abilities until which time the driver has successfully demonstrated that they are able to complete all functions without direct on-site supervision. Essential Responsibilities • Perform daily pre and post trip inspection of vehicle., • Learn geography of assigned route and surrounding areas., • Service trash, recycling, compost and/or mixed waste bins using various types of collections vehicles., • Clean up spills and overflows and return bins to their proper area., • Operate vehicles with public safety as your primary responsibility., • Utilize in-cab electronic computer systems to follow route and service requirements., • Use radio to effectively communicate with dispatch and route supervisors., • Observe and comply with hazardous waste and material handling and disposal procedures and regulations as set forth by local, state and federal environmental and health agencies., • Report all accidents, injuries or maintenance issues in a timely manner., • Observe and comply with all applicable safety regulations, rules, policies and procedures., • Maintain collaborative working relationship with coworkers and customers., • Participate in external, Department and Company-wide trainings to increase skill sets and improve service.Knowledge, Skills & Abilities Knowledge of: • Principles of waste and recycling collection., • Basic truck mechanics and parts., • Federal, state and local job site health and safety rules, regulations and best practices. Page Break Ability to: • Maintain a positive attitude with coworkers and customers., • Proactively establish trust and credibility with coworkers by maintaining accountability., • Contribute to the team dynamic by promoting inclusion, support and collaboration amongst coworkers., • Take initiative, self-manage time and productivity through multitasking., • Effectively and concisely communicate both orally and in writing., • Think independently and creatively to problem solve., • Read and utilize on-board electronic routing system.Education, Training & Experience, • Current and valid commercial driver’s license and DOT medical card., • One year of refuse truck driving experience required., • Experience in the resource recovery industry preferred., • High school diploma or GED preferred. Note: Those in the Driver Trainee classification require one year of previous commercial driving experience. Supplemental Information Universal Waste Systems, Inc. celebrates diversity and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status. This description is not intended and should not be construed to be an exhaustive list of all responsibilities, skills, effort, work conditions, and benefits associated with the job.

Job DescriptionAbout the Role We are looking for a Self-Driving Systems Specialist (SDS Specialist) to support the diagnostics, calibration, configuration, and technical readiness of self-driving systems used in autonomous vehicles and robotaxi fleets across North America. The SDS Specialist focuses on the technology layer of autonomous mobility: sensors, compute systems, software configurations, autonomous driving hardware, system diagnostics, calibration procedures, and technical validation. This role ensures that the self-driving system installed in each autonomous vehicle is functioning correctly, accurately calibrated, and ready to support safe testing, commercial deployment, and autonomous ride-hailing operations. You will work closely with Senior Technicians, AV Operations Leads, Safety Operators, Depot Specialists, engineering teams, and fleet operations teams to identify technical issues, execute structured troubleshooting procedures, and support reliable operation of autonomous vehicle platforms. This position is ideal for candidates with experience in automotive electronics, ADAS systems, embedded systems, robotics, diagnostics, calibration, or complex technical support who want to work at the center of autonomous vehicle deployment and robotaxi operations. Key Responsibilities Self-Driving System Diagnostics • Diagnose and troubleshoot self-driving system issues affecting autonomous vehicle performance and fleet readiness., • Investigate technical problems related to cameras, LiDAR, radar, GPS/GNSS, compute units, sensors, connectivity modules, wiring, and autonomous driving hardware., • Execute structured diagnostic procedures to identify root causes of SDS hardware, software, and configuration issues., • Support advanced troubleshooting for autonomous vehicle faults that impact testing, commercial operations, or robotaxi fleet availability., • Escalate complex technical cases to engineering teams with clear findings and supporting documentation.Hardware Support, • Inspect, repair, replace, and validate SDS hardware components installed on autonomous vehicles., • Support installation and verification of cameras, LiDAR units, radar sensors, compute hardware, sensor mounts, antennas, and related components., • Confirm that autonomous driving hardware is correctly installed, secured, clean, functional, and ready for operation., • Collaborate with Senior Technicians on vehicle-level issues involving both standard automotive systems and SDS components., • Ensure all hardware work is completed according to strict safety, quality, and technical procedures.Software Configuration & Updates, • Perform software updates, configuration changes, and system validation checks for autonomous driving systems., • Execute defined software procedures using diagnostic tools, command-line tools, configuration files, or engineering-provided workflows., • Verify successful software installation and confirm that the SDS is operational before the vehicle returns to service., • Support troubleshooting of software-related issues affecting autonomous vehicle behavior, system communication, or operational readiness., • Maintain accurate records of software versions, configurations, updates, and validation results.Sensor Calibration & Validation, • Perform calibration and verification activities for autonomous vehicle sensors and self-driving system components., • Support calibration workflows involving cameras, LiDAR, radar, localization systems, and other perception-related hardware., • Validate that the self-driving system is functioning correctly after maintenance, software updates, hardware replacement, or vehicle service., • Assist engineering teams with data collection, calibration testing, and system performance verification., • Ensure autonomous vehicles meet technical readiness requirements before returning to robotaxi operations or on-road testing.Engineering & Operations Support, • Serve as the on-site subject matter expert for SDS-related technical issues., • Provide structured technical findings to engineering, fleet operations, and project teams., • Collaborate with AV Operations Leads to prioritize SDS-related repairs and reduce vehicle downtime., • Support incident reviews, root-cause analysis, and technical escalation processes., • Contribute to continuous improvement of troubleshooting workflows, calibration procedures, and operational documentation.Documentation & Compliance, • Maintain accurate records of diagnostics, repairs, software updates, hardware changes, and calibration activities., • Follow strict operational, safety, and technical procedures when working with autonomous driving systems., • Complete all required system validation checklists and technical reports., • Support compliance with internal quality standards, safety protocols, and customer requirements., • Ensure all SDS-related work is traceable, repeatable, and properly documented.Requirements Essential, • Minimum 3+ years of experience in automotive electronics, diagnostics, embedded systems, robotics, technical support, or complex technical systems., • Strong troubleshooting and analytical skills., • Experience working with vehicle electronics, sensors, control systems, or advanced technical hardware., • Comfortable following structured software procedures and technical workflows., • Ability to work with diagnostic tools, logs, technical documentation, and engineering instructions., • High attention to detail and strong procedural discipline., • Good communication skills and ability to work with cross-functional technical teams., • Fluent English.Strongly Preferred, • Experience with ADAS, autonomous vehicles, robotics, sensor systems, or advanced driver assistance technologies., • Familiarity with LiDAR, radar, camera systems, GNSS, IMU, compute units, or perception-related hardware., • Experience with Linux, command-line tools, CAN bus, vehicle networks, or embedded systems., • Experience performing calibration, validation, or system integration activities., • Background in automotive testing, AV operations, robotics labs, fleet diagnostics, or technical field support.What We Are Looking For Successful SDS Specialists are precise, structured, and technically curious. They enjoy solving complex system problems and understand that reliable self-driving system performance is essential for safe autonomous vehicle operations, commercial robotaxi services, and fleet scaling. This role requires someone who can work carefully with advanced hardware and software, follow engineering procedures exactly, and communicate findings clearly to both technical and operational teams. You should be comfortable working in a depot or technical operations environment where autonomous vehicles must be diagnosed, validated, and returned to service quickly and safely. What We Offer • Opportunity to work directly with self-driving systems, autonomous driving hardware, and advanced vehicle technologies., • Hands-on involvement in robotaxi fleet operations, autonomous vehicle testing, and autonomous ride-hailing deployment across North America., • Exposure to robotics, ADAS, sensor calibration, embedded systems, EV platforms, and next-generation mobility technologies., • Structured onboarding, technical procedures, and ongoing training., • Career development opportunities in autonomous vehicle operations, AV diagnostics, robotics, and technical fleet support., • Collaboration with engineering, operations, depot, technician, and safety teams., • Opportunity to support new city launches, fleet scaling, and commercial autonomous mobility programs. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Class A Driver – Equipment Transport for Quinn CAT • Pay: $25–$30 per hour, • Location: Sylmar Rental Branch Are you a safety-focused Class A Driver looking for a stable career with a respected company? Join our team and play a critical role in delivering and transporting heavy equipment while working independently and building valuable industry experience. This position offers the opportunity to work with a wide variety of equipment, develop specialized transportation skills, and be part of a team that values professionalism, safety, and customer service. What You'll Do • Safely transport equipment to and from customer locations and company facilities, • Operate company vehicles in compliance with all DOT and DMV regulations, • Perform pre-trip and post-trip inspections to ensure equipment and vehicle safety, • Load, secure, transport, and unload equipment using proper procedures, • Operate forklifts, pallet jacks, cranes, and other material handling equipment, • Provide basic equipment operation demonstrations to customers when needed, • Complete delivery paperwork, driver logs, permits, and transportation records accurately, • Perform routine vehicle maintenance and minor repairs when appropriate, • Plan efficient routes and maintain delivery schedules, • Participate in the DOT drug and alcohol testing program What We're Looking For • Valid California Class A Driver's License, • Current DMV Medical Certificate, • High school diploma or GED, • At least one year of driving experience or an equivalent combination of training and experience, • Strong commitment to safety and customer service, • Forklift certification is a plus, but not required Why Join Us? • Competitive hourly pay with opportunities for overtime, • Steady, year-round work, • Work with a variety of equipment and machinery, • Independent work environment with daily variety, • Opportunity to grow your skills and advance within the company, • Join a team that values safety, professionalism, and reliability Physical Requirements • Ability to lift up to 100 lbs occasionally, • Frequent standing, walking, reaching, and equipment operation, • Occasional climbing, kneeling, crouching, balancing, and crawling, • Ability to work outdoors in varying weather conditions Work Environment This position regularly works around heavy equipment, moving mechanical parts, and outdoor environments. Noise levels can be high, and safety awareness is essential at all times. If you take pride in safe driving, enjoy working with equipment, and want to build a long-term career with a growing company, we'd love to hear from you. Apply Today and do not miss out on this great opportunity! \nCompany Description Quinn Company is a Caterpillar dealership founded in 1919. The company sells, services, and rents a full line of new and used construction, agricultural, and material handling equipment, diesel and natural gas engines. As a Caterpillar Dealership, Quinn Company enjoys a unique ability to be a nimble company with entrepreneurial spirit and leverage the global reach and support of a Fortune 50 company... local and global at the same time. Quinn Company ranks among the top performing Caterpillar Dealers in the world. This competitive, performance based drive is the foundation of the company’s culture. www.quinncompany.com Quinn Company is a Caterpillar dealership founded in 1919. The company sells, services, and rents a full line of new and used construction, agricultural, and material handling equipment, diesel and natural gas engines.\r\n\r\nAs a Caterpillar Dealership, Quinn Company enjoys a unique ability to be a nimble company with entrepreneurial spirit and leverage the global reach and support of a Fortune 50 company... local and global at the same time. \r\n\r\nQuinn Company ranks among the top performing Caterpillar Dealers in the world. This competitive, performance based drive is the foundation of the company’s culture.\r\n\r\nwww.quinncompany.com

Job Description As a valued member of our team, you will be working for our well-established, medium-sized construction materials company with multiple production plants throughout California. The Ready-Mix Driver is responsible for driving a truck equipped with a concrete mixer to deliver concrete mix to job sites. The role requires the driver to operate the truck in a safe and efficient manner, following and adhering to all applicable Federal & State laws. • Paid training is available for candidates that have a Class A or B license with air brake and tank endorsements. To qualify, you must be able to drive manual transmission trucks (no automatic restriction on your license)., • Starting pay is $32.40 per hour after paid training. BENEFITS:, • PPO/HMO Health Insurance, Medical, Dental, Vision, Life, • PTO (Paid Time Off), • 401k Retirement Plan, • Overtime pay, • Direct Deposit, • Training Program, • Strong Safety Program, • Employee Assistance Program, • Employee Referral BonusEssential Functions:, • Drive truck safely and timely to location for unloading., • Drive truck under loading hopper to receive sand, gravel, cement, and water and starts mixer., • Move levers on truck to release concrete down truck chute into wheelbarrow or other conveying container or directly into area to be poured with concrete., • Perform all duties assigned by management in a timely manner., • Perform pre-trip and post-trip inspections of truck and reports repairs to personnel., • Assemble, disassemble, lift, and carry chutes., • Clean truck after delivery to prevent concrete from hardening in mixer and on truck., • Maintain a clean vehicle, always cleaning it while on duty (spray surfaces of truck with water and protective compounds for cleaning purposes), on company time., • Monitor trucks and other company equipment to ensure appearance, safety, and proper maintenance levels., • Maintain accurate work and driving records of daily activities., • Maintain a high level of customer service through courteous and effective communication with dispatchers, plant management, other drivers, contractors, and customers. Non-Essential Duties: • Assist in yard functions, lifting materials and operating yard equipment., • Attend safety and other training meetings as required. Core Competencies: • Able to communicate effectively with other staff., • Able to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals., • A strong commitment to all health and safety guidelines. Position Type/Expected Hours of Work This is a full-time position. Hours of work may vary at plant or other location. Not eligible for remote work. Must be available 6 days a week and to work overtime as job duties demand. Travel Required: Yes Preferred Education and Experience • Possession of a valid unrestricted California Commercial Driver License (Group A or B) and comply with Department of Transportation regulations., • Must have Air Brake and Tanker Endorsement and a safe driving record., • Knowledge of road construction materials, road construction processes and industry. requirements., • High school diploma or general education degree (GED) Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Physical Demands and Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, hazardous chemicals, outside weather conditions and vibration. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, fumes or airborne particles, extreme heat and risk of electrical shock and elevated noise levels. Employees must wear the required personal protective equipment; up to and including safety vest, hard hat, e r protection, gloves, and safety glasses. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for extended periods of time. The employee frequently is required to use hands to finger, handle or feel and reach with hands and arms. The employee is regularly required to stand, walk, climb, balance, stoop, kneel, crouch, crawl, talk or hear. The employee regularly assembles, disassembles, lifts, and carries chutes that can weigh up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Individual must be able to pass a pre-employment physical and drug screen. This Organization Participates in E-Verify Esta Organizacion Participa en E-Verify A&A Ready Mixed Concrete is an EEO/AA (equal opportunity/affirmative action) company and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. A&A Ready Mixed Concrete es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera. #zr

Job Description Reports to: Director of Facilities FLSA: Non-Exempt Supervises: N/A Department: Facilities Pay Rate: $35.00-$40.00 Position Mission The HVAC/Refrigeration Technician is responsible for the maintenance and service of restaurant kitchen equipment, including beverage systems, boilers, ice machines, freezers and HVAC work. Maintenance duties include the installation, service and repair of equipment. A company vehicle will be provided to ensure you are well equipped for the job. Responsibilities Include: • Performs complex repairs on commercial kitchen and HVAC equipment., • Manage installation, repair and maintenance of commercial kitchen equipment., • Diagnose technical problems and determine proper solutions., • Provides preventative maintenance activities., • Maintains safe, clean and organized work area to include work vehicle, tools, manuals and parts., • Uses various hand and power tools appropriately. • Completes other repairs as needed. • Deals with interruptions and successfully manages multiple tasks., • Adheres to all company policies and procedures., • Maintains behaviors and actions consistent with the company's values and standards., • Performs other related duties as required and assigned. Required Skills, Knowledge and Abilities: • Valid driver's license and acceptable driving record, • 3+ years of experience in HVAC/Refrigeration is a must., • Valid driver’s license and acceptable driving record., • Must own your own tools., • Experience working in HVAC/Refrigeration in the restaurant industry preferred., • Knowledge of commercial kitchen equipment is a plus., • EPA Certification Type II or better required., • Must be flexible and willing to work a varied schedule as dictated by the needs of the business, • Must be able to work in fast-paced, high-pressure environment with many interruptions., • Attention to detail and a high degree of mental concentration are necessary for working on difficult projects, balancing numerous tasks simultaneously, and meeting deadlines., • Works well under pressure and tight timelines, • The ability to work weekends and travel as needed. Other Attributes: · Must be a self-starter, process and solutions focused · Enthusiastic and strong driver of the company’s Mission and Core Values · Remain positive in high pressure and stressful situations · Demonstrates critical thinking, communication and relationship-building skills · Consistently takes initiative, works independently, sets priorities, makes judicious decisions, and meets deadlines. · Finishes duties and projects as required and assigned in an efficient and timely manner. · Understands what it takes to be successful in a matrixed organization and get stuff done · Works additional hours as needed. · Regular and punctual attendance. Benefits: • Medical Insurance – Eligible 1st of month after 60 days., • 401K Plan – Eligible after one year., • Vacation – One week after one year., • Sick Leave- Granted per State Requirement., • Cell Phone allowance- $100/month, • Vehicle Allowance – Company vehicle provided for work use only. Additional Information: Physical Demands: Standard office work environment. The physical demands for this position are sits, stands, bends, lifts and moves intermittently during working hours. These physical requirements may be accomplished with our without reasonable accommodation Additional Information: The duties of this position may change from time to time. Alvarado Restaurant Nation reserves the right to add or delete duties and responsibilities at the discretion of Alvarado Restaurant Nation. This position is descriptive and is intended to describe the general level of work being performed. It is not intended to be all inclusive. Alvarado Restaurant Nation (ARN) is proud to be an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex (including pregnancy), gender identity or expression, sexual orientation, national origin, age, disability, protected veteran status, genetic information, or any other status protected by law. ARN is committed to complying with all applicable federal, state, and local employment laws and to foster an inclusive and accessible workplace for all. Hiring Decisions are based on skill, qualifications, and experience Application Deadline: Evergreen

Job Description SOFTWARE ENGINEER (EMBEDDED) Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. As an Embedded Software Engineer at Freeform, you will be responsible for contributing to the architecture of critical embedded software systems that enable our advanced metal 3D printing factories to operate fully autonomously at high speeds with precision. This entails developing software solutions for hardware control/autonomy, high speed data acquisition, and custom high-performance compute systems. Projects will vary across the stack, so we expect our engineers to be flexible and always put the mission first. 3D printing experience is not required to be successful here - rather we look for smart, motivated, collaborative engineers who love solving hard problems and creating amazing technology! Responsibilities: • Contribute to the architecture of state-of-the art software for an advanced production-scale metal 3D printing system, • Design and develop the machine instruction interface to the metal 3D printing system hardware, • Develop software to enable the computer vision system, monitor sensor data, perform calibrations, log quality data, and keep track of the health of the printing system over its lifetime, • Work with process and control engineers to integrate control algorithms into production software, • Work with FPGA developers to develop high-speed data acquisition software, • Create software for collection and analysis of process data, • Develop software required to implement production automation solutions, • Develop, unit test, and deploy functional, scalable, robust, and maintainable software, • Generate and maintain documentation of designed software and integrated systems Basic Qualifications: • Bachelors in computer science, computer engineering, electrical engineering, applied mathematics, or related field, • 2+ years of professional, post-graduation experience in software development using C/C++, • Experience in real-time embedded system design with Linux OS Nice to Have: • Experience working in a high-performance compute environment (FPGAs or GPUs), • Experience with PCIe driver development and troubleshooting, • Experience with Rust, • Experience with high-speed data acquisition and real time closed-loop-control systems, • Excellent knowledge of OS coding techniques, IP protocols, interfaces, and hardware subsystems, • Experience writing software for industrial automation systems, robotics, or related hardware, • Creative thinker able to apply first-principles reasoning to solve complex problems, • Excellent verbal and written communication skills Location: • Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country., • Our fast-paced, cross-functional environment is built on close collaboration, and as such, this role requires full-time onsite presence (five days a week), with very limited exceptions. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process. Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated salary range for this role is $125,000-$150,000, dependent on the candidate's academic level (Bachelors, Masters, or PhD) and demonstrated out of classroom experience., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Dedicated Team truck driver Average pay: $1,560-$1,910 weekly Home time: Monthly Experience: All CDL holders • Dry van trailer hauling auto parts., • 100% no-touch and 95% drop-and-hook freight., • 7-10 loads per week., • Drive within CA, NV and OR., • Take your dog or cat on the road with our Team Pet Policy., • Mileage pay, plus hourly pay while on duty, not driving., • Earn at least $1,000 in weekly guarantee pay during your first 90 days at Schneider., • Weekly performance pay., • $10,000 sign-on bonus paid over 12 monthly payments in your first year for experienced drivers., • $5,000 sign-on bonus paid over 12 monthly payments in your first year for inexperienced drivers., • Paid orientation., • Paid time off after 6 months, plus 6 days of holiday pay per year., • Annual bonus: Earn up to 2% of annual gross pay each year., • Valid Class A Commercial Driver's License (CDL)., • Live within 100 miles of Fontana, CA. Need CDL training? Explore our _ or call us at 800-447-7433, and we can talk you through it. • Medical, dental and vision insurance., • 401(k) savings plan with company match., • Unlimited referral bonuses., • $200/month tuition reimbursement (up to $7,000) for qualified drivers., • Schneider's Team Matching Program can help you find a partner., • Credit for Military Experience and Military Apprenticeship programs, plus more _, • Leading _ designed for driver comfort., • See full list of _, • Dependable paychecks – Weekly paychecks reflect the consistent miles you’ll drive on a weekly basis., • Familiarity – Get to know the routes you drive and the customer you work with., • All-encompassing pay packages – Pay includes all facets of the exact job you do. Our history has taught us that treating everyone with dignity and respect is vital to our ongoing success. We embrace and seek out diversity that is inclusive of thought, race, ethnicity, national origin, sex, gender, gender expression, age, religion, sexual orientation, ability, medical condition, veteran or military status, experience and background. This diversity and openness ensures all associates have equal access to opportunities and resources to contribute fully to the organization's success, and it fuels innovation, improves strategic thinking and cultivates leadership. Any applicant may request a reasonable accommodation to complete a job application, pre-employment testing, or job interview or to otherwise participate in the hiring process consistent with the Americans with Disabilities Act (ADA) by contacting their Recruiter, Human Resources Business Partner, and/or Human Resources Leave Administration. Schneider uses E-Verify to confirm the employment eligibility of all newly hired associates. To learn more about E-Verify, including your rights and responsibilities, please visit _. Job Company Driver Schedule FULLTIME Sign On Bonus 10000 Compensation details: 1560-1910 PIc96f9598a96f-37820-41677549

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by over $1 billion in total funding from leading investors including Altimeter Capital, ICONIQ, Kleiner Perkins, Lightspeed Venture Partners, Redpoint Ventures, and T. Rowe Price — and with over $1 billion in signed contracts across commercial and US government customers, we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches in 2027 and plans to scale to 100 satellites a year, we're Building Bigger — helping develop the solar system and build toward a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a high-growth Series D-funded company, we'd love for you to apply. The Role The software team at K2 strives to blur the lines between the various types of software development and encourages team members to get into parts of the stack they may not otherwise have experience with. This spectrum includes GNC algorithms (Rust, C++), application software on flight computers (Rust, C++), to embedded software on microcrontrollers (Rust, C++),to operating systems (Rust, C++, C), to HDL programming (VHDL, SystemVerilog), to test systems (Python), and many things inbetween. By doing this, we create a stronger team with more capable engineers. For now, this does not include front-end, artificial intelligence, or machine learning development. As a part of the team, you will be responsible for the development and verification of the software used to fly some of the largest spacecraft that have ever been flown. You will be able to write mission-critical code that controls propulsion systems, attitude control systems, and power systems to ensure safe and reliable operation of the vehicle. In your first 6 months you will developcore pieces of the software architecture including the strategies for fault tolerance, real-time control, and telemetry downlink. In your first year you will implement larger software systems and begin verifying your code using both software and hardware in the loop simulators. In your first two years you will operate your code on multiple spacecraft, demonstrating robust performance in demanding missions. Responsibilities • Create software architecture for real-time, fault tolerant control of a 20kW+ spacecraft, • Develop software applications for control of spacecraft subsystems, including propulsion, guidance/attitude control, thermal, power, and communications systems, • Design and implement state machines for robust operation of the spacecraft, • Create and utilize robust tools to allow for rapid deployment of quality code, • Perform data analysis and anomaly investigation to identify and resolve software bugs, • Support integration and testing of the spacecraft subsystems, • Build and maintain infrastructure to increase reliability when developing and testing software Qualifications • Bachelor's degree in computer science, computer engineering, electrical engineering, math, or a STEM discipline or 10+ years of professional experience in software engineering, • Development experience in Rust, C/C++, Python, VHDL, SystemVerilog Nice to Have • Experience with spacecraft flight software development, • Fluency with Linux systems programming and driver development, • Experience with continuous integration and continuous delivery systems, • Experience building or working with hard real-time embedded systems (bare-metal or RTOS), • Basic knowledge of electronics, computer architecture, and control systems, • Experience developing or working with state machines, • Experience with software verification and testing methods, • Experience with software and network performance analysis and debugging, • Experience with implementing Extended Kalman Filters for inertial sensors, • Experience with fault tolerant software design and implementation, • Experience defining and creating test systems for both hardware-in-the-loop and hardware-out-of-the-loop Compensation and Benefits: • Base salary range for this role is $200,000 - $240,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level, • Comprehensive benefits package including paid time off, medical/dental/vision/ coverage, life insurance, paid parental leave, and many other perks If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by over $1 billion in total funding from leading investors including Altimeter Capital, ICONIQ, Kleiner Perkins, Lightspeed Venture Partners, Redpoint Ventures, and T. Rowe Price — and with over $1 billion in signed contracts across commercial and US government customers, we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches in 2027 and plans to scale to 100 satellites a year, we're Building Bigger — helping develop the solar system and build toward a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a high-growth Series D-funded company, we'd love for you to apply. The Role The software team at K2 strives to blur the lines between the various types of software development and encourages team members to get into parts of the stack they may not otherwise have experience with. This spectrum includes GNC algorithms (Rust, C++), application software on flight computers (Rust, C++), to embedded software on microcrontrollers (Rust, C++),to operating systems (Rust, C++, C), to HDL programming (VHDL, SystemVerilog), to test systems (Python), and many things inbetween. By doing this, we create a stronger team with more capable engineers. For now, this does not include front-end, artificial intelligence, or machine learning development. As a part of the team, you will be responsible for the development and verification of the software used to fly some of the largest spacecraft that have ever been flown. You will be able to write mission-critical code that controls propulsion systems, attitude control systems, and power systems to ensure safe and reliable operation of the vehicle. In your first 6 months you will developcore pieces of the software architecture including the strategies for fault tolerance, real-time control, and telemetry downlink. In your first year you will implement larger software systems and begin verifying your code using both software and hardware in the loop simulators. In your first two years you will operate your code on multiple spacecraft, demonstrating robust performance in demanding missions. Responsibilities • Create software architecture for real-time, fault tolerant control of a 20kW+ spacecraft, • Develop software applications for control of spacecraft subsystems, including propulsion, guidance/attitude control, thermal, power, and communications systems, • Design and implement state machines for robust operation of the spacecraft, • Create and utilize robust tools to allow for rapid deployment of quality code, • Perform data analysis and anomaly investigation to identify and resolve software bugs, • Support integration and testing of the spacecraft subsystems, • Build and maintain infrastructure to increase reliability when developing and testing software Qualifications • Bachelor's degree in computer science, computer engineering, electrical engineering, math, or a STEM discipline or 5+ years of professional experience in software engineering, • Development experience in Rust, C/C++, Python, VHDL, SystemVerilog Nice to Have • Experience with spacecraft flight software development, • Fluency with Linux systems programming and driver development, • Experience with continuous integration and continuous delivery systems, • Experience building or working with hard real-time embedded systems (bare-metal or RTOS), • Basic knowledge of electronics, computer architecture, and control systems, • Experience developing or working with state machines, • Experience with software verification and testing methods, • Experience with software and network performance analysis and debugging, • Experience with implementing Extended Kalman Filters for inertial sensors, • Experience with fault tolerant software design and implementation, • Experience defining and creating test systems for both hardware-in-the-loop and hardware-out-of-the-loop Compensation and Benefits: • Base salary range for this role is $160,000 - $200,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level, • Comprehensive benefits package including paid time off, medical/dental/vision/ coverage, life insurance, paid parental leave, and many other perks If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description About Odin Dynamics Founded in 2025, Odin Dynamics is a defense technology company building autonomous underwater vehicles that will define the next era of undersea warfare. We are focused on delivering capable, resilient autonomous systems that strengthen the strategic advantage of the United States and its allied navies. We move fast, build real hardware, and operate with the urgency that the mission demands. We are building a new platform from the ground up. This is not a role where you will inherit a mature product with every architectural decision already made. You will take incomplete requirements, early hardware, and difficult technical constraints and turn them into dependable, production-ready autonomy systems. We value rigorous engineering without unnecessary process. Decisions should be driven by physics, test data, and product outcomes—not inherited convention or documentation volume. The Role Odin Dynamics is hiring multiple Senior Embedded Software Engineers to serve as Responsible Engineers for critical embedded subsystems across our platform. Each engineer will take primary technical ownership of one of three areas: Embedded Linux compute Motor-control firmware Battery-management-system firmware Candidates will apply to a common requisition, and Odin Dynamics will determine the best area of focus through the interview process. We are looking for engineers with deep expertise in at least one area who are also comfortable working across hardware, firmware, embedded Linux, controls, testing, and the broader software engineering domain. As the Responsible Engineer for your subsystem, you will own it throughout its lifecycle: requirements, architecture, detailed design, implementation, bring-up, verification, field testing, production support, failure analysis, and continued improvement after deployment. This is a hands-on individual-contributor position. You will be expected to write substantial production code, make technical decisions, mentor other engineers, and remain accountable for the performance and reliability of your subsystem. There are no organizational handoffs when a difficult problem crosses the boundary between software and hardware. What You’ll Do Serve as the Responsible Engineer for a major embedded subsystem. Develop greenfield embedded software from initial requirements and architecture through field-tested, production-ready implementation. Write, review, test, profile, and debug production software in a low-level systems programming language. Design deterministic software for systems with strict latency, jitter, timing, memory, and compute constraints. Bring up new embedded hardware in close collaboration with Avionics and Power Electronics engineers. Read schematics and component documentation, review hardware designs, and diagnose hardware/software integration issues. Debug low-level problems involving interrupts, DMA, concurrency, synchronization, memory corruption, peripheral configuration, communications, timing, and performance. Use oscilloscopes, logic analyzers, in-circuit debuggers, and related laboratory tools to identify root causes. Develop and maintain interfaces using common embedded communication protocols and bus architectures. Write unit tests, integration tests, and system-level tests for: HOOTL — hardware-out-of-the-loop SIL — software-in-the-loop HIL/HITL — hardware-in-the-loop Work with Test Engineering to validate systems in laboratory, field, and sea-trial environments. Support production testing, investigate failures on deployed hardware, and own corrective improvements throughout the product lifecycle. Build automated development workflows using modern build systems, continuous integration, static analysis, profiling, and automated testing. Produce concise, functional engineering documentation that enables implementation, testing, operation, and future development. Use AI-assisted development tools to accelerate implementation, testing, debugging, and documentation while independently validating outputs and maintaining a first-principles understanding of the resulting system. Mentor other engineers and contribute to technical reviews without moving away from hands-on engineering. Areas of Focus Embedded Linux Compute The Embedded Linux Responsible Engineer will own the platform software below the application and autonomy layers, including: Embedded Linux platform architecture and board-support packages Embedded Linux build and distribution systems Bootloaders, system bring-up, and low-level platform configuration Kernel configuration and driver development Secure boot and platform security mechanisms Hardware I/O and peripheral integration Networking and time synchronization Real-time Linux techniques, including scheduler configuration, CPU isolation, latency analysis, and performance tuning Storage and high-speed interfaces Platform diagnostics, reliability, and field support Motor Control The Motor Control Responsible Engineer will own the complete embedded software stack for a microcontroller-based motor-control system, including: MCU board-support packages and low-level firmware Peripheral and communications interfaces Real-time scheduling, timing, interrupts, DMA, and memory management Control state machines, fault handling, and protection behavior Closed-loop motor-control algorithms and system tuning Integration with power electronics and vehicle-level control systems Verification, field testing, production support, and failure investigation Battery Management The Battery Management Responsible Engineer will own the complete embedded software stack for a microcontroller-based battery-management system, including: MCU board-support packages and low-level firmware Cell-monitoring, communications, control, and protection interfaces Battery-management state machines and fault handling State-of-charge and state-of-health estimation Sequencing, monitoring, limits, diagnostics, and recovery behavior Integration with power electronics and vehicle-level systems Verification, field testing, production support, and failure investigation What We’re Looking For Deep practical expertise in either: Embedded Linux development; or Bare-metal or RTOS-based microcontroller development. Sufficient familiarity with adjacent embedded environments to collaborate across subsystem boundaries. Strong proficiency in at least one low-level systems programming language. Experience developing hard real-time or highly deterministic systems under latency, jitter, memory, and performance constraints. Experience bringing up new boards and embedded platforms within your primary technical specialization. Experience reading schematics, reviewing hardware interfaces, and debugging integrated hardware/software systems. Experience with common digital communication protocols and bus architectures. Experience using oscilloscopes, logic analyzers, in-circuit debuggers, and other hardware-debugging tools. Strong understanding of concurrency, synchronization, interrupts, DMA, timer configuration, memory allocation, scheduling, and low-level peripheral control. Experience writing maintainable production code, conducting code reviews, developing automated tests, using static analysis, profiling performance, and debugging complex timing or memory failures. Experience with modern build systems and CI/CD workflows. Demonstrated ability to work from first principles, make progress with incomplete information, and rapidly iterate between design, implementation, testing, and refinement. Ability to work independently with minimal oversight while collaborating closely across engineering disciplines. Willingness to support field testing and sea trials when required. Approximately five or more years of relevant embedded software experience is preferred, but demonstrated technical depth, multidisciplinary problem-solving ability, and a record of delivering difficult systems matter more than a specific number of years. Exceptional candidates at any experience level are encouraged to apply. Preferred Experience Developing safety-critical, mission-critical, or high-reliability products. Taking an embedded system from a blank sheet through multiple design, implementation, test, and refinement cycles into production or operational deployment. Autonomous vehicles, underwater systems, UAVs, robotics, aerospace, automotive, industrial controls, medical devices, energy systems, or other tightly integrated electromechanical products. Embedded Linux build and distribution systems. Experience across a range of embedded compute and microcontroller platforms. Kernel-driver development for Embedded Linux candidates. Motor-control concepts such as advanced commutation and control techniques, feedback systems, current control, velocity control, position control, and inverter protection. Battery-management concepts such as cell monitoring and balancing, state estimation, thermal monitoring, charge and discharge limits, sequencing, and fault-state design. High-speed and wireless interface integration. Establishing or extending HOOTL and SIL test environments. At Odin Dynamics, we offer competitive salaries benchmarked against the defense and robotics industries, meaningful early-stage equity, and benefits that cover the essentials — full covered health, dental, vision; 401(k); and paid time off. We invest in professional development and support our people in growing their skills alongside the company. We tie compensation to the impact you have, not your title. As we grow, our compensation and benefits will grow with us. We're building this company alongside the people who join it, and we believe everyone here should share in what we build together. DisclosuresThis position may require access to information protected under U.S. export control laws and regulations, including the Export Administration Regulations (EAR) and the International Traffic in Arms Regulations (ITAR). Please note that any offer for employment may be conditioned on authorization to receive software or technology controlled under these U.S. export control laws and regulations without sponsorship for an export license. Odin Dynamics, Inc. participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Odin Dynamics is an equal opportunity employer committed to creating a diverse and inclusive workplace. All qualified applicants will be treated with respect and receive equal consideration for employment without regard to race, color, creed, religion, sex, gender identity, sexual orientation, national origin, disability, uniform service, Veteran status, age, or any other protected characteristic per federal, state, or local law, including those with a criminal history, in a manner consistent with the requirements of applicable state and local laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Dedicated nighttime truck driver - GMSPO Average pay: $1,370-$1,670 weekly Home time: Daily Experience: 3 months or greater CDL experience • Haul auto parts in liftgate trailers., • 100% hand unloading using pallet jacks., • 5 loads per week with multiple stop-offs per load., • Drive within Southern California., • Hourly pay., • Weekly performance pay., • Paid orientation., • Paid time off after 6 months, plus 6 days of holiday pay per year., • Annual bonus: Earn up to 2% of annual gross pay each year., • Valid Class A Commercial Driver’s License (CDL)., • Drivers on this account are required to drive at night., • Live within 50 miles of Rancho Cucamonga, CA., • Minimum 3 months of Class A driving experience. Need CDL training? Explore our _ or call us at 800-447-7433, and we can talk you through it. • Medical, dental and vision insurance., • 401(k) savings plan with company match., • Unlimited referral bonuses., • $200/month tuition reimbursement (up to $7,000) for qualified drivers., • Credit for Military Experience and Military Apprenticeship programs, plus more _, • Leading _ designed for driver comfort., • See full list of _, • Reliable home time – Know exactly when and how often you’ll get home., • Dependable paychecks – Weekly paychecks reflect the consistent miles you’ll drive on a weekly basis., • Familiarity – Get to know the routes you drive and the customer you work with. Our history has taught us that treating everyone with dignity and respect is vital to our ongoing success. We embrace and seek out diversity that is inclusive of thought, race, ethnicity, national origin, sex, gender, gender expression, age, religion, sexual orientation, ability, medical condition, veteran or military status, experience and background. This diversity and openness ensures all associates have equal access to opportunities and resources to contribute fully to the organization's success, and it fuels innovation, improves strategic thinking and cultivates leadership. Any applicant may request a reasonable accommodation to complete a job application, pre-employment testing, or job interview or to otherwise participate in the hiring process consistent with the Americans with Disabilities Act (ADA) by contacting their Recruiter, Human Resources Business Partner, and/or Human Resources Leave Administration. Schneider uses E-Verify to confirm the employment eligibility of all newly hired associates. To learn more about E-Verify, including your rights and responsibilities, please visit _. Job Company Driver Schedule FULLTIME Sign On Bonus Compensation details: 1370-1670 PIc90935c890bb-37820-41363707

Job DescriptionAbout the Role We are looking for Autonomous Vehicle Safety Operators (Safety Drivers) to support the testing, validation, commercial deployment, and scaling of autonomous vehicle (AV) and robotaxi fleets across North America. As an Autonomous Vehicle Safety Operator, you will play a critical role in ensuring the safe operation of self-driving vehicles during testing, pilot programs, and commercial autonomous ride-hailing services. Working closely with engineering, fleet operations, and depot teams, you will monitor vehicle behaviour, ensure compliance with operational procedures, and safely intervene whenever required. No previous autonomous vehicle experience is required. We provide comprehensive training on autonomous driving systems, operational procedures, and safety protocols. We are looking for experienced, responsible drivers with excellent situational awareness who are excited to contribute to the future of mobility. This position offers the opportunity to work with some of the world's most advanced autonomous vehicle technologies, supporting robotaxi launches, fleet expansion, and commercial autonomous transportation across multiple cities. Key Responsibilities Autonomous Vehicle Operations • Safely operate and monitor autonomous vehicles during testing, validation, and commercial robotaxi fleet operations., • Continuously supervise the performance of the self-driving system while maintaining full awareness of surrounding traffic conditions., • Take immediate manual control of the vehicle whenever required by operational procedures or safety protocols., • Complete assigned routes while ensuring compliance with local traffic regulations and company operating procedures., • Support the successful deployment of autonomous ride-hailing services by maintaining safe and consistent vehicle operation.Fleet Readiness & Vehicle Inspection, • Conduct pre-trip and post-trip inspections to ensure each autonomous vehicle is deployment-ready., • Verify vehicle cleanliness and inspect cameras, sensors, mirrors, lighting, and other critical systems before each shift., • Report any damage, abnormal vehicle behaviour, or maintenance concerns to depot and technical teams., • Support overall fleet readiness by ensuring vehicles remain available for daily operations.Data Collection & Operational Reporting, • Record disengagements, observations, and operational events using company reporting tools., • Provide clear, structured feedback on vehicle behaviour, traffic conditions, and unusual scenarios encountered during testing or commercial operations., • Assist engineering teams by documenting situations that improve the performance of autonomous driving systems., • Maintain accurate operational records and complete all required documentation.Safety & Compliance, • Follow all operational procedures, safety protocols, and regulatory requirements., • Participate in ongoing training, certification, and safety refreshers., • Maintain professionalism when interacting with members of the public during autonomous vehicle testing and robotaxi operations., • Support continuous improvement initiatives aimed at increasing the safety and efficiency of autonomous fleet operations.Requirements Essential, • Valid driver's license., • Minimum 5 years of driving experience., • Clean driving record with no major violations., • Ability to successfully pass a background verification (BGV)., • Ability to pass pre-employment and random drug and alcohol screening., • Excellent situational awareness and defensive driving skills., • Comfortable driving for extended periods in urban and highway environments., • Ability to follow detailed operational procedures with high attention to detail., • Strong communication and reporting skills., • Upper-Intermediate English.Preferred, • Experience as a professional driver, fleet driver, chauffeur, ride-hailing driver, or vehicle tester., • Previous experience supporting automotive testing, ADAS validation, mapping, or fleet operations., • Familiarity with electric vehicles (EVs)., • Experience working in shift-based or 24/7 operational environments.What We're Looking For Successful Autonomous Vehicle Safety Operators are calm under pressure, highly observant, and committed to safety. They enjoy working with emerging technologies and understand the importance of consistency, accuracy, and procedural compliance in supporting autonomous vehicle deployment and robotaxi fleet operations. You do not need previous experience working with autonomous vehicles - our comprehensive training program will prepare you to safely support the testing, deployment, and commercial operation of self-driving vehicles. What We Offer • Opportunity to work on some of most advanced autonomous vehicle and robotaxi programs., • Comprehensive training on autonomous driving systems and operational procedures., • Long-term career opportunities within the rapidly growing autonomous mobility industry., • Exposure to cutting-edge robotics, artificial intelligence, and autonomous transportation technologies., • International projects supporting robotaxi launches, new city deployments, and fleet scaling across North America., • A collaborative environment working alongside engineering, operations, and technical specialists developing the future of autonomous ride-hailing services. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionCompany description Terry Soot Management Group (TSMG) is a field data collection company founded in 2017 in Europe. We collect data where automation is not possible. We count features, take pictures, make videos, record speech, and scan areas for every detail you need to make more informed decisions. Our field data collection teams are spread across Europe and North America, ready to accept new challenges. Role Overview: The Autonomous Vehicle Test Operator is responsible for operating and evaluating a self-driving vehicle in autonomous mode, including collecting data and providing feedback, and offering ride hail service to the general public. Eligibility: • Must be at least twenty-one (21) years old, possess a valid CDL driver’s license, and have at least three (3) years of experience as a Class C licensed driver to operate Class C vehicles.Key responsibilities:, • Operate/Drive autonomous vehicles on both defined and undefined routes, including a variety of environmental conditions - driving (some manual driving but primarily monitoring the vehicle's behavior in autonomous mode) and (ii) software monitoring and logging responsibilities and providing verbal feedback/directions about the autonomous vehicles (AV) environment., • Test other aspects of our autonomous vehicles, • Complete timely and detailed ride reports for our operations and engineering teams, • Must be able to work specific shifts, including early mornings, evenings, and/or weekends, as well as overnight shifts, • Maintain high standard of safety, inside and outside of the vehicle.Necessary skills:, • CDL Driver's License, • Proficiency with a laptop and Office apps (i.e., Gmail, Sheets and Docs), • Proficiency using a handheld device/touchscreen smartphone, • Must have good attention to detail and be able to quickly and concisely describe their thoughts.Physical requirements:, • Occasional standing, walking, and long periods of sitting., • Use hands to finger; handle or feel; and talk or hear; climb stairs and/or ladders., • Occasionally required to reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl., • Must be able to occasionally lift and/or move up to 45 pounds., • Must use close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus., • Most work is accomplished outdoors in a vehicle. We would be happy to get to know you and your skills better and see how we can support each other's growth. Please apply and let's meet! We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

BC Wire Rope, a division of American Equipment Holdings, is a full service provider of wire rope, slings, chain, hoists, and rigging equipment. BC Wire Rope has served the heavy lifting needs of customers throughout Los Angeles, San Diego, Las Vegas, Tucson and the Western United States since 1974. Specializing in lifting products ranging from fall protection to synthetic slings, BC Wire Rope & Rigging carries products from the industry’s most reputable vendors including Crosby, Slingmax, Campbell, and Bridon American. With ample testing and manufacturing capabilities, BC Wire Rope is also the manufacturer of KWIK synthetic slings. Position Summary: The Delivery Driver is responsible for delivering orders for customers and suppliers around the Anaheim area. Key Responsibilities: • Make all stops assigned and to pick up or deliver orders for customers or suppliers, • Relay requests or complaints received from customers upon return., • Responsible for pulling orders and loading their truck for the day, • Assisting shipping/receiving, • Putting stock away and other general housekeeping duties, • Obey all traffic regulations., • Make only assigned, scheduled stops as designated., • Check the condition of the assigned vehicle daily, • Protect from damage or loss of all customer orders and originals in your possession., • Plan the delivery routes in a logical order of stops, • Review deliveries for accuracy. Compare to customer invoice., • Operate company vehicle in a safe, responsible manner, • Load and unload deliveries, • Complete paperwork for the billing process., • Always maintain professionalism., • Excellent customer service skills., • Ability to effectively promote the products and services of the company. Qualifications: • Computer proficiency, • Able to lift up to 50 lbs, • License to drive, • Must pass drug test, satisfactory MVR records, • Must pass background check, • 1-2 years Driving/Delivery experience Education and Experience • High School Diploma, • Valid Driver’s License, • Clean Driving Record, • Forklift certified or able to complete forklift certification a plus Position Type and Expected Hours of Work This is a full-time position; typical work hours and days are Monday through Friday, 7:00 a.m. to 3:30 p.m. This is a full-time onsite position with frequent trips to deliver and commute to various locations such as shops, vendor locations and commercial businesses; 8-hour days, Monday through Friday. American Equipment Holdings is an organization of leading overhead crane and hoist, industrial weighing, and below-the-hook service providers in the United States. Together, our companies provide comprehensive solutions for everything related to customers’ overhead crane and hoist, rigging, and weighing and measurement needs, including OSHA mandated inspections, preventative maintenance and repair field services, parts, engineering, ISO certified fabrication, new and replacement equipment, automated systems, system modernizations and training. American Equipment Holdings is one the largest and fastest growing companies in our space with more than 800 dedicated team members that serve thousands of customers throughout the United States. Proof of right to lawfully work in the United States required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Compensation details: 21-22 Hourly Wage PI64c63f5683f3-37820-42077078

Job Description DUTIES & RESPONSIBILITIES: · Ensure that all materials are used in a safe, damage-free, and efficient manner. · Monitor vehicle and equipment performance and request maintenance and repairs when necessary. · Check all steps in the installation and finish process for efficiency and quality. · Be available to complete any task on the job site, as needed. · Review and approve all work records (time cards or sheets) for each employee reporting to this position. · Adhere to all established safety standards and procedures to protect employees and the Company. · Ensure that each job assigned is completed with an accident-free record. · Seek out opportunities to improve methods, processes, and procedures to benefit the company. · When requested, train new employees. · Submit work or activity reports according to Company policy. · Attempt to resolve any employee grievance before notifying the VP. or the Senior Field Supervisor. · Clock in and out according to company policy. · Notify President or Senior Field Supervisor immediately of safety issues, schedule changes, absenteeism, or other problems as they arise. · Check delivered (or loaded) material and supplies for quantity and type before accepting it use on a job. · Act in a proactive manner to find better and more efficient ways of improving operations to increase the company’s profit. · Maintain good, business-like relations with other trades, suppliers, and clients. · Adhere to and enforce Company policies with regard to ethics, conduct, and appearance. · Perform all other tasks assigned by the Forman or, in the Foreman’s absence the Senior Field Supervisor. Knowledge & Skills: Installation and maintenance · Typical responsibilities: plans, supervises team of apprentice level employees, and performs all phases of installation, maintenance, repair and inspection of electrical systems and service work in new or remodeled facilities which includes: installing, repairing, and maintaining electrical motors, complex electronic devices, control panels, relays, fire control monitors and systems, conduit, and switches and ensuring proper electrical operation of generators and transformers.. • Skill in the use of equipment of the trade including power and hand tools;, • Ability to plan, lay out and supervise the work of others; physical condition commensurate with the demands of the position. Administrative · Typical responsibilities: performs cost estimates and projections for electrical projects; reviews and upgrades electrical systems; evaluates electrical procedures to protect and maintain state property; meets with design engineers on new building and remodeling projects to ensure electrical needs are met; reviews electrical and contract specifications and performance criteria; solicits and evaluates bids from private contractors; recommends and coordinates bid selections; writes purchase requests; · interprets electrical blueprints and draws wiring sketches; hires and trains staff; schedules and adjusts workload and evaluates performance; orders and maintains electrical parts. General • Fluent in English: Speaking, Understanding, Reading and Writing., • Be a problem solver who has a demonstrated ability to overcome challenges with creative solutions, • Detail oriented with strong organizational skills., • Working knowledge of Spanish is desirable, but not required. QUALIFICATIONS • Valid ET Card, • Electrical hazards training, • Emergency procedures, • General work site safety, • Hazard recognition, • Selection and use of appropriate PPE, • Understanding work orders and plans, • Vehicle safety, safe operation, and driving Education and Experience: Required: Equivalent to completion of high school or equivalent. License or Certificate: · Possession of, or ability to obtain, an appropriate, valid Class C driver license within six months of employment. · Possession of, or ability to obtain within six months, Electrical Hazard Awareness Procedures and CPR/First Aid/AED certifications. Working conditions: • Fast-paced environment requiring flexibility, adaptability and resilience in a wide variety of work situations., • Nature of business results in many tight or continually changing deadlines., • General exposure to outside environmental elements, with low to medium noise, exposure to heat and cold. PHYSICAL DEMANDS AND WORKING ENVIRONMENT • The conditions herein are representative of those that must be met by an employee to successfully perform the essential, • functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Environment: Construction site; travel from site to site; work with and around heavy construction equipment and pesticides; work at heights on aerial equipment (including ropes/saddles) and ladders; work on slippery and uneven surfaces; work around traffic; exposure to noise, dust, heat and inclement weather conditions. Physical requirements: · Sufficient physical ability to perform moderate to heavy lifting; reaching, bending, stooping, kneeling, and crawling; walking, standing and climbing for prolonged periods of time operating motorized equipment and vehicles. · Controlling Machines and tools — using either control mechanisms or direct physical activity to operate machines or tools. Vision: See in the normal visual range with or without correction; vision sufficient to read computer screens and printed documents to operate equipment, and to perform other duties as assigned. Hearing: Hear in the normal audio range with or without correction. Company DescriptionPowerfull Electric Inc. is an electrical contracting company dedicated to providing luxury residential homeowners with revolutionary technologically advanced electrical systems. We provide white glove service, unmatched quality and custom craftsmanship for our clients both during construction and the lifespan of your estate. Our employees are our backbone and they are the technical experts in all aspects of design, development, planning, executing and administration of all your electrical needs. We are POWERFULL ELECTRIC!Powerfull Electric Inc. is an electrical contracting company dedicated to providing luxury residential homeowners with revolutionary technologically advanced electrical systems. \r\n\r\nWe provide white glove service, unmatched quality and custom craftsmanship for our clients both during construction and the lifespan of your estate. \r\nOur employees are our backbone and they are the technical experts in all aspects of design, development, planning, executing and administration of all your electrical needs. \r\nWe are POWERFULL ELECTRIC!

Job Description Required Qualifications Entry level position High school diploma or equivalent. Ability to read and understand instructions, drawings, and written procedures. Ability to work in a fast-paced manufacturing environment. Strong attention to detail and commitment to quality. Ability to remain focused while performing repetitive tasks. Preferred Qualifications Previous experience in a manufacturing, production, warehouse, or assembly environment. Experience operating production equipment or machinery. Mechanical aptitude and strong hand-eye coordination. Good manual dexterity for handling small parts and performing assembly work. The Assembler is responsible for assembling and testing products, and for troubleshooting and resolving issues. Assemble components of all Product Lines. Select correct tools and fixtures. Test assembled products. Troubleshoot and resolve problems associated with the assembly and testing of products. Ensure ability to: read blueprints; identify components; use pertinent hand tools and rework techniques; operate equipment, dimensioning and setting tolerances of mechanical parts and assemblies. Create labor records for all transactions. Use the guiding principles and tools of the Manufacturing System to drive continuous improvement. Enable Skills-Based Hiring: No Worker Training Location Location Is this role bonus eligible No Is this for a Pre-identified Candidate No Please provide Pre-identified Candidate details First & Last Name: Phone Number: Email Address: Pay Rate: Is this a Casual Worker No Please enter in Shift, Shift Premiums, Hours and Rotation Specifics for this role N/A Select Type of Work Location Shop Please select Environment Type OnShore Will the position be required to wear respirator No Please Select Driver Type Non-Driver Is a TCC Controlled Technology check required No

Job DescriptionExperienced Sales Consultant Scott Robinson Honda – Torrance, CA Scott Robinson Honda is a family-owned and operated car dealership proudly serving the South Bay and Los Angeles area for over 50 years. We are now hiring experienced and highly motivated Sales Consultants for immediate placement. If you have strong communication skills, a proven sales background, and a passion for delivering outstanding customer service, this is an excellent opportunity to grow your career. You’ll receive full management support, training, and all the tools you need to succeed. This position offers unlimited earning potential with opportunities for advancement. On average, our Sales Consultants earn $60K – $120K+ per year. What We Offer Competitive Compensation: $60,000 – $120,000+ per year (Salary, Commissions & Bonuses) $500 Referral Bonus Paid Training & Ongoing Professional Development Medical, Dental, Vision & Group Life Insurance Paid Time Off & Holidays 401(k) with Employer Match Employee Discounts on Vehicles, Service & Parts Supportive, Experienced Management & Team-Oriented Environment Responsibilities Provide exceptional customer service throughout the sales process Maintain knowledge of current and incoming inventory Assist customers with vehicle selection and financing options Work in a fast-paced environment while meeting sales goals Qualifications • 1+ year automotive sales experience preferred, • Valid California Driver License & clean driving record Ability to obtain a California vehicle sales license (not required for interview) Strong customer service and communication skills Positive, energetic, and eager to learn Basic computer knowledge • Biligual a plusAdditional Requirements All applicants must successfully pass pre-employment testing, including a physical, drug screening, background check, and MVR. We are an equal opportunity employer and prohibit discrimination or harassment based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by law.

BC Wire Rope, a division of American Equipment Holdings, is a full service provider of wire rope, slings, chain, hoists, and rigging equipment. BC Wire Rope has served the heavy lifting needs of customers throughout Los Angeles, San Diego, Las Vegas, Tucson and the Western United States since 1974. Specializing in lifting products ranging from fall protection to synthetic slings, BC Wire Rope & Rigging carries products from the industry’s most reputable vendors including Crosby, Slingmax, Campbell, and Bridon American. With ample testing and manufacturing capabilities, BC Wire Rope is also the manufacturer of KWIK synthetic slings. Position Summary: The Delivery Driver is responsible for delivering orders for customers and suppliers around the Anaheim area. Key Responsibilities: • Make all stops assigned and to pick up or deliver orders for customers or suppliers, • Relay requests or complaints received from customers upon return., • Responsible for pulling orders and loading their truck for the day, • Assisting shipping/receiving, • Putting stock away and other general housekeeping duties, • Obey all traffic regulations., • Make only assigned, scheduled stops as designated., • Check the condition of the assigned vehicle daily, • Protect from damage or loss of all customer orders and originals in your possession., • Plan the delivery routes in a logical order of stops, • Review deliveries for accuracy. Compare to customer invoice., • Operate company vehicle in a safe, responsible manner, • Load and unload deliveries, • Complete paperwork for the billing process., • Always maintain professionalism., • Excellent customer service skills., • Ability to effectively promote the products and services of the company. Qualifications: • Computer proficiency, • Able to lift up to 50 lbs, • License to drive, • Must pass drug test, satisfactory MVR records, • Must pass background check, • 1-2 years Driving/Delivery experience Education and Experience • High School Diploma, • Valid Driver’s License, • Clean Driving Record, • Forklift certified or able to complete forklift certification a plus Position Type and Expected Hours of Work This is a full-time position; typical work hours and days are Monday through Friday, 7:00 a.m. to 3:30 p.m. This is a full-time onsite position with frequent trips to deliver and commute to various locations such as shops, vendor locations and commercial businesses; 8-hour days, Monday through Friday. American Equipment Holdings is an organization of leading overhead crane and hoist, industrial weighing, and below-the-hook service providers in the United States. Together, our companies provide comprehensive solutions for everything related to customers’ overhead crane and hoist, rigging, and weighing and measurement needs, including OSHA mandated inspections, preventative maintenance and repair field services, parts, engineering, ISO certified fabrication, new and replacement equipment, automated systems, system modernizations and training. American Equipment Holdings is one the largest and fastest growing companies in our space with more than 800 dedicated team members that serve thousands of customers throughout the United States. Proof of right to lawfully work in the United States required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Compensation details: 21-22 Hourly Wage PI0d970cf735f3-26276-42077078

Location: 12210 Artesia Blvd, Artesia, California, SALMEX PIZZA, INC. Job Duties: Operate all equipment, stock ingredients from delivery area storage, work area, walk-in cooler. Prepare product. Receive and process telephone orders. Take inventory and complete associated paperwork. Clean equipment and facility approximately daily. Training: Orientation and training provided on the job. Communication Skills: Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills: Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between wywe and hands/fingers to rapidly and accurately make presice movements with speed. Ability to enter orders using a computer keyboard or touch screen. Work Conditions: Exposure to: Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to commercial dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from oven up to 500 or higher. Sharp edges and moving mechanical parts. Sensing: Talking and hearing on telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. Temperaments: The ability to direct activities, perform repetetives tasks, work alone and with others, work under stress, meet estrct quality control standards, deal with people, analyze and compile data, make judgments and decisions. Physical Demands Standing: Most task are performed from a standing position. Walking Surfaces include ceramic tile "Bricks" with linoleum in some food process areas. Height of work surfaces is generally between 36" and 48". Walking: Walking is generally in short distances for short durations. Sitting: Paperwork is normally completed in an office at a desk or table. Lifting: Bulk Products deliveries are made two times a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 60 pounds with dimensions up to 3' X 1.5'. Cases are ussualy lifted from the floor and stacked on to shelves up to 72" high. Carrying: Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store. Trays of the pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. Pushing: Pushing is performed to move trays which are placed in dollies. A stack of trays on a dolly is approximately 24" - 30" and requires a 7.5 pounds to push. Trays may also be pulled. Climbing: Team Members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. Stooping/Bending: Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their kneeswhile standing at the station. Duration of this position is approximately 30-45 seconds at one time, repeated continuoslsy during the day. Forward bending is also present at the front counter and when stacking ingredients. Crouching /Squatting: Performed occasionally to stock shelves and to clean low areas. Reaching: Reaching is performed continuosly; up, down and forward. Workers reach above 72" occasionaly to turn on'off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Hand Tasks: Eye-hand coordination is essential. Use of hands is continuous during the day. Frequently activities requiere use of one or both hands. Shaping pizza dough requires frequent and forceful use of forearms and wrist. Workers must manipulate a pizza peel when removing pizza from the oven, and when using rolling cutter. Frequent and/or forceful pinching is required in the assembly of cardborad pizza boxes. Team members must be able to grasp cans, the phone, the pizza cutter and the pizza peel, and pizza boxes. Machines, Tools, Equipment, Work Aids: Team members may be required to utilize pencil/pens, computers, telephones, calculators, TDD equipment, pizza cutter and pizza peel. Job Duties: Deliver product by car and thhen to door of customer. Deliver flyers and doorhangers or any marketing materials. Requires: Valid Driver License with safe driving recor meeting company standards. Access to insured vehicle which can be used for delivery. Essential Skills: Navigational skills to read a map, locate addresses within designated delivery area. Must navigate adverse terrain including multy-story buildings, private homes, and other delivery sites while carrying product. Physical Demands: Carrying: During delivery, carry pizzas, sides and beverages while performing "walking" and "climbing" duties. Driving: Deliver company products within a designated delivery area. A team member may make several deliveries per shift. Walking: Delivery personnel must travel the store and delivery vehicle and from delivery vehicle to customer's location and back. Climbing: During delivery of product, navigation of five or more flights of stairs may be required. Work Conditions: Exposure to: Varying and sometimes adverse weather conditions when delivering product, driving and couponing. Sensing: Far vision and night vision for driving.

Job Description This role is full-time, in-office at our Long Beach, CA headquarters. We're not able to offer remote or hybrid arrangements, so please only apply if you're able to work onsite full-time. What We Do CarParts.com is the go-to eCommerce platform for auto care and maintenance. We provide drivers with quality parts at competitive prices and enable them to schedule appointments with trusted mechanics directly through our website. Using world-class design principles and the latest technologies, we deliver a fast, intuitive digital experience backed by our company-owned national distribution network. With over 1,000 employees worldwide, we are scaling rapidly, fueled by our most recent strategic partnership and $35 million investment. This positions us for the next phase of growth as we continue to empower drivers along their journey. Our Culture At CarParts.com, our culture goes beyond our core values of Safety First, Customer Focused, and Commitment to Excellence. We are a performance-driven, data-focused, and fast-paced team where results matter and winning is expected. • Hungry & Hardworking: We set ambitious goals, measure progress with clear metrics, and hold ourselves accountable to deliver results., • Promote from Within: We reward top performers with opportunities for growth and advancement., • Collaborative & In-Person: We believe the best ideas and fastest execution happen face-to-face., • High Standards: We move quickly, pay attention to details, and dig deep - whether it’s analyzing contracts, aggregating complex scenarios, or building clear, data-driven presentations., • No Passengers: We value grit, ownership, and the relentless pursuit of results Role Summary The Network Transportation Manager is a critical, hands-on role responsible for building and scaling our own last mile delivery capability while managing our broader fleet and carrier network across 4 nodes. This is a greenfield opportunity - we are moving from a carrier-dependent model toward owning the last mile, and this person will design and execute that transition. You will own day-to-day performance across the network, manage strategic carrier partnerships during the build, collaborate with our data science team to develop the analytics foundation, and architect the long-term network strategy covering national, regional, and own-carrier operations. Building our own last mile is the priority. That means standing up the operational infrastructure - routes, drivers, vehicles, compliance, technology - while simultaneously managing the third-party carrier relationships that bridge us to that future state. You will set the 3-, 6-, and 12-month planning horizons for both the transition and the broader network, while also being the person who picks up the phone when a lane goes down today. Key Responsibilities Own Last Mile Buildout (Primary Focus) • Lead the design and buildout of PRTS's own last mile delivery operation — this is the core strategic priority of the role, • Define the operating model: route structures, driver/vehicle requirements, service zones, delivery windows, and cost-per-stop targets across each node, • Build the infrastructure needed to run owned delivery: onboard and manage drivers (W2 or contract), establish vehicle procurement or leasing strategy, and implement last mile technology (route optimization, proof-of-delivery, driver apps), • Develop the business case and phased transition plan for shifting volume from third-party last mile carriers to owned operations — with clear milestones, cost targets, and service benchmarks, • Establish DOT compliance, HOS tracking, and driver safety programs from the ground up for the owned fleet, • Partner with data science to build the routing, dispatch, and performance analytics that power a scalable owned delivery operation Fleet & Carrier Operations (Ongoing Execution) • Own day-to-day transportation operations across all 4 network nodes — on-time performance, cost per unit, exception management, and service recovery, • Manage third-party last mile and middle mile carrier partners (national, regional, and spot) through scorecards, SLA reviews, and regular business reviews — these partners bridge the gap while owned last mile scales, • Develop, implement, and enforce SOPs, carrier compliance standards, DOT and safety regulations, and operational documentation, • Lead carrier sourcing, contract negotiation, and onboarding as the network expands into new geographies and volume tiers, • Forecast transportation capacity needs across 3-, 6-, and 12-month horizons to stay ahead of demand and avoid service gaps Network Architecture & Strategic Planning • Own the long-term transportation network architecture — defining the trajectory from carrier-dependent to owned last mile, and the right mix of national, regional, and own-carrier operations at maturity, • Model the financial and operational trade-offs of owned vs. outsourced last mile at different volume thresholds and geographies, • Build capacity planning and peak season frameworks; ensure the network is never caught flat-footed during surges, • Identify and recommend new node placements, lane optimizations, and carrier diversification opportunities, • Partner with senior leadership to translate network strategy into actionable roadmaps with measurable milestones Data, Analytics & Capability Buildout • Serve as the primary business owner and collaborator for transportation analytics with our data science team — define requirements, co-develop tools, and validate outputs, • Build and own KPI dashboards covering carrier performance, cost-per-stop, transit times, exception rates, and network utilization, • Perform trend analyses to identify underperforming lanes, rising cost drivers, and systemic exceptions — then act on them, • Drive automation and process improvements that reduce manual intervention and improve delivery reliability, • Establish a data-first operating culture within transportation from day one Cross-Functional & Stakeholder Leadership • Partner with warehouse and fulfillment teams to align inbound/outbound schedules and reduce dwell time across all nodes, • Work with Finance on transportation budgeting, cost tracking, carrier rate benchmarking, and variance reporting, • Serve as the escalation owner for carrier failures, service disruptions, and network exceptions — resolve fast, document root cause, prevent recurrence, • Represent transportation in cross-functional planning meetings; bring visibility, data, and clear recommendations WHAT YOU WILL OWN — FIRST 90 DAYS 30 Days Complete a full audit of existing carrier relationships, fleet utilization, DOT/compliance posture, and node-level performance across all 4 locations. Identify the top 3 operational gaps and present findings to leadership. 60 Days Stand up carrier scorecards and SLA baselines for all active partners. Kick off the first analytics sprint with the data science team. Deliver an initial assessment of own last mile feasibility by node — volume thresholds, route density, cost-per-stop modeling, and infrastructure requirements. 90 Days Deliver a network architecture recommendation covering the path to owned last mile — phased by node, with volume triggers, capital requirements, and service targets. Include the national/regional carrier strategy for middle mile and the lanes where third-party last mile remains the right near-term answer. QUALIFICATIONS Required • 6+ years of experience in transportation operations, network management, or supply chain logistics — with meaningful exposure to owned/private fleet or own last mile operations, • Hands-on experience building or operating an owned last mile delivery program — you have stood up routes, managed drivers, and know what it takes to make unit economics work, • Direct experience with both middle mile and last mile operations; you understand the cost structure, service dynamics, and failure modes of each — and how they interact, • Proven track record managing carrier relationships end-to-end: sourcing, contracting, performance management, and escalation resolution, • Experience operating across multiple distribution or fulfillment nodes (3+ preferred), • Demonstrated ability to build and own 3-, 6-, and 12-month operational plans including labor, capacity, and carrier forecasting, • Working knowledge of DOT regulations, Hours of Service (HOS), carrier compliance requirements, and transportation safety standards, • Strong analytical skills — comfortable building reports, interpreting transportation data, identifying trends, and driving decisions from metrics, • Proven ability to develop and implement SOPs, policies, and process improvements in a logistics or distribution environment, • Excellent communication skills — equally effective with carriers, warehouse teams, data scientists, and the CFO, • Builder mentality: you have operated without a fully built infrastructure and found it energizing, not frustrating Preferred • Experience designing or contributing to long-term transportation network strategy — carrier mix modeling, node architecture, own-fleet business cases, • Background at a growth-stage or startup logistics company where you built processes from scratch, • Familiarity with TMS platforms, route optimization tools, or carrier API/EDI integrations, • Experience as a collaborator or product owner with a data science or engineering team building logistics analytics tools, • Deep experience with own/private fleet operations: asset acquisition or leasing, driver hiring and management (W2 and/or contractor models), vehicle maintenance programs, and private fleet P&L, • Experience building the business case for insourcing last mile — modeling cost-per-stop, route density, volume thresholds, and make-vs-buy trade-offs, • Prior experience at or benchmarking against large-scale operators (e.g., Amazon Logistics, Walmart Transportation, XPO, Echo, Coyote) — you know the playbook and can right-size it for a lean organization THE RIGHT FIT You are a great fit if... • You have built or run an owned last mile operation and know what the early days look like, • You have led transportation at a mid-size or scaling company, • You know what good looks like from a large operator — and you can adapt it, • You are comfortable being the smartest person in the room on transportation and rolling up your sleeves anyway, • You want ownership over building something that lasts This may not be the right fit if... • You are used to managing teams of managers and need that structure to be effective, • You prefer to set direction and hand off execution to others, • Ambiguity and incomplete process make you uncomfortable, • You are looking for a large team and a fully built playbook A reasonable salary estimate based on education, experience, and geographic location is: $120,000-$150,000 Equal Opportunity Employer CarParts.com is an equal-opportunity employer. We enthusiastically accept our responsibility to make employment decisions without regard to race, religious creed, color, age, sex, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. Our management is dedicated to ensuring that we fulfill this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment. The above-noted job description is not intended to describe, in detail, the multitude of tasks that may be assigned but rather to give the incumbent a general sense of the responsibilities and expectations of his/her position. As the nature of business demands change so, too, may the essential functions of this position.

Job Description Automotive Service Advisor If you believe Customer Service is a true craft -- one built on charisma, communication and thorough product knowledge - we want to talk to you! Huge growth opportunity and upward career path. Opportunity and support to start earning significant income immediately. Guaranteed Salary and training/transition period incentives. Join a growing and winning team now! As a Service Advisor you will be responsible to meet and greet service customers promptly in a professional and courteous manner. Inspect vehicle and refer to service history to accurately identify and verify customer’s service needs. Promote the sales of appropriate services, parts, and accessories by thoroughly understanding the product and associated service requirements. Provide accurate cost and time of completion estimates for the services recommended, communicate and get proper authorization from customers. Check on progress of services to vehicles throughout the day and contact customer to communicate and receive approval regarding any changes in the cost-estimate, promised time of delivery or recommended services. Administer new and used vehicle warranty repairs in accordance with manufacturer warranty guidelines. Confirm service appointments by telephone the day before the customer is scheduled to arrive and conduct post-repair follow up. Inspect vehicles prior to each customer delivery to ensure vehicles services and/or repairs are performed correctly and communicate the results with the customer. Meet requirements of the state and federal law for automobile repair and consumer protection. Demonstrates behaviors consistent with the Company’s Values in all interactions with customers, co-workers and vendors. Job Requirements: Two or more years of previous experience as a service advisor a plus High school diploma or equivalent. Valid driver license in the state that you will work and a good driving record. Great attitude with high-energy personality. Excellent customer service skills. Professional appearance and work ethic. Ability to work well in a process driven environment. Outstanding communication skills in both verbal and written. Benefits include a lucrative compensation plan, paid time off, medical, and employee vehicle purchase program. Salary: Commission based - $3,000 to $15,000 / month Its Time To Make The Most Important Move Of Your Career! When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this work. This is not an exhaustive list of all duties and responsibilities. We reserve the right to amend and change responsibilities to meet business and organizational needs as necessary. We are an Equal Opportunity Employer and a drug free workplace. We Would Really Like To Hear From You! Apply By Clicking The "Apply Now" Button

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by over $1 billion in total funding from leading investors including Altimeter Capital, ICONIQ, Kleiner Perkins, Lightspeed Venture Partners, Redpoint Ventures, and T. Rowe Price — and with over $1 billion in signed contracts across commercial and US government customers, we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches in 2027 and plans to scale to 100 satellites a year, we're Building Bigger — helping develop the solar system and build toward a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a high-growth Series D-funded company, we'd love for you to apply. The Role The software team at K2 strives to blur the lines between the various types of software development and encourages team members to get into parts of the stack they may not otherwise have experience with. This spectrum includes HDL programming (VHDL, SystemVerilog), embedded software on microcontrollers (Rust, C++), operating systems (Rust, C++, C), application software on flight computers (Rust, C++), GNC algorithms (Rust, C++), to test systems (Python), and many things inbetween. By doing this, we create a stronger team with more capable engineers. For now, this does not include front-end, artificial intelligence, or machine learning development. As a part of the team, you will be responsible for the development and verification of FPGA firmware used to fly some of the largest spacecraft that have ever been flown. You will be able to write mission-critical code that controls propulsion systems, attitude control systems, RF systems, and power systems to ensure safe and reliable operation of the vehicle. In your first 6 months you will work with your team to develop core pieces of the FPGA architecture such as the strategies for fault tolerance, real-time control, high-speed data routing, and telemetry downlink. In your first year you will implement larger and more complex FPGA systems and begin verifying your code using both software and hardware in the loop simulators. In your first two years you will operate your code on multiple spacecraft, demonstrating robust performance in demanding missions. Responsibilities • Own the architecture and implementation of critical programmable logic systems across the spacecraft that support vehicle networking, RF systems, and real-time control of all spacecraft subsystems, • Implement these architectures in RTL using VHDL and SystemVerilog, • Verify and validate FPGA designs using a mix of simulation, bench-testing, and Hardware In The Loop testbeds, • Support integration, test, and troubleshooting efforts for FPGA designs across all levels of the spacecraft development and manufacturing, • Develop the tools and infrastructure to support rapid, high-reliability FPGA solutions across all subsystems Qualifications • Bachelor's degree in computer science, computer engineering, electrical engineering, math, or a STEM discipline or 3+ years of professional experience in software development, • 3+ years working with complex FPGA designs spanning digital, mixed signal, or RF applications, • Development experience with VHDL or SystemVerilog Nice to Have • Experience integrating logic onto Xilinx SoC platforms, • Experience with digital signal processing (DSP) fundamentals and implementing complex DSP logic and software defined radios on FPGAs, • Experience implementing high-speed SERDES interfaces such as Ethernet, PCIe, and JESD204C., • Experience with standard bus and streaming protocols such as AXI and AXI-Stream, • Experience with evaluating and integrating vendor/third party IP, • Experience with common scripting languages such as Python, TCL, and Bash, • Experience with Linux systems programming and driver development, • Experience with continuous integration and continuous delivery systems, • Experience building or working with hard real-time embedded systems (bare-metal or RTOS), • Basic knowledge of electronics, computer architecture, and control systems, • Experience with software verification and testing methods, • Experience with software and network performance analysis and debugging Compensation and Benefits: • Base salary range for this role is $120,000 – $225,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level, • Comprehensive benefits package including paid time off, medical/dental/vision/ coverage, life insurance, paid parental leave, and many other perks If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionCompany Description Land Rover Santa Monica is looking for experienced Automotive Technicians ready to take their career to the next level. Join a luxury automotive team where your experience, skills, and productivity are rewarded. Salary: Up to $65 / hour flat rate Sign-On Bonus Available — amount and eligibility based on experience/certification level. Terms and conditions apply. Level 3 & Level 4 Technicians encouraged to apply. Job Description Duties and Responsibilities: • Perform work as outlined on repair orders with efficiency and accuracy, • Examine vehicle and diagnose necessary repairs, • Communicate with parts department to obtain needed parts, • Document work performed, • Road-test vehicles when required or refer to the test technician, • Maintain high safety and quality standards, • Understand and follow federal, state and local regulations, such as those governing the disposal of hazardous wastesQualifications Automotive Technician Qualifications: • At least 2 years of previous Automotive Technician experience (Jaguar Land Rover preferred), • Own a set of tools, • Valid driver’s license and a good driving record, • High school diploma or the equivalent, • Manual dexterity Employment Requirements: • Valid driver’s license and a good driving record., • All applicants must be authorized to work in the USA., • All applicants must be able to demonstrate ability to pass pre-employment testing to include background checks, MVR, drug test and valid driver license. Additional Information Land Rover Santa Monica offers the following Benefits: Medical & dental benefits 401(k) ️ Paid time off (PTO) Paid training & certifications Tool allowance Relocation assistance available Competitive work schedule Ready for a change? Apply today or contact us for a confidential conversation. Know a Great Technician? Earn Up to $3,000! Help us build the team at Jaguar Land Rover Beverly Hills! Sonic Automotive teammates can earn a referral bonus when they refer a qualified Automotive Technician who joins our team. Referral bonuses range from $500 to $3,000 based on technician skill level, including $3,000 for Master/A-Level Technicians. Submit your referral through the Franchise Automotive Technician Referral Form. (The Technician Position has a Pay Scale consisting of the following elements and ranges. Wages include Base Hourly Compensation of between $35.00 and $65.00.) All your information will be kept confidential according to EEO guidelines.

Job Description The Assistant General Manager (AGM) is the second-level manager in our stores. The AM is responsible for managing the day-to-day shift operations of our restaurant, including the supervision of team members. In addition, the AGM assists in taking inventory, ordering food and supplies, managing costs and delivering store performance that executes Shakey’s Fast, Friendly, Clean standards. The Assistant Manager reports to the General Manager. ESSENTIAL DUTIES AND RESPONSIBILITIES: The following responsibilities are representative of the AGM position. Other duties may be assigned. • Monitors and supervises day-to-day restaurant and shift operations., • Creates a team environment that delivers outstanding operations performance and guest service every day., • Executes in-store promotional campaigns and participates in local marketing activities in the community., • Trains and coaches shift leads and team members to drive the execution of Shakey’s "Fast, Friendly, Clean" culture and standards., • Assists in restaurant hiring and management of staffing levels to ensure adequate coverage during all shifts and day parts., • Consistently monitors restaurant operations to identify opportunities for improvement., • Maintains a positive learning and training environment for all team members and delivers training on all work stations., • Monitors team member performance and provides ongoing coaching, counseling and recognition feedback., • Takes food, supply and merchandise inventories and places orders to restock., • Creates store manager and team member work schedules and posts them on a timely basis., • Ensures compliance with Shakey’s cash handling, safety/security and Team Member Handbook policies and procedures., • Ensures safe and sanitary practices regarding all aspects food handling, preparation, serving and storage., • Manages store operations to control inventory, food and beverage and labor expenses., • Maintains a safe work environment and ensures adherence to all safety standards and procedures., • Maintains compliance with all employment and labor laws., • Manages restaurant operations to satisfactorily pass quarterly internal financial audits., • Inspects food storage and preparation practices to maintain quality standards and comply with sanitation regulations., • Investigates and resolves food quality and guest service complaints., • Works in any work station when required to support efficient restaurant operations., • Performs other duties and responsibilities as required or requested. SUPERVISORY RESPONSIBILITES: • Assists in supervising the daily activities of 20 to 30 employees., • Carries out assistant supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include training employees; planning and assigning work; monitoring performance; rewarding and disciplining employees; addressing complaints and resolving problems. COMPETENCIES: To perform the job successfully, an individual must demonstrate the following competencies. • Job Knowledge - Competent in required job skills and knowledge; exhibits ability to learn and apply new skills; requires minimal supervision; uses resources effectively., • Problem Solving - Identifies and resolves problems in a timely manner., • Managing Customer Focus - Promotes customer focus; provides training in customer service delivery; monitors customer satisfaction., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; participates in meetings., • Teamwork - Exhibits objectivity and openness to others' views; gives and welcomes feedback; contributes to building a positive team spirit; supports everyone's efforts to succeed., • Change Management - Communicates changes effectively; prepares and supports those affected by change., • Performance Coaching - Gives performance feedback; motivates for increased results; recognizes contributions., • Delegation - Delegates work assignments; sets expectations and monitors delegated activities., • Managing People - Makes self available to staff; develops subordinates' skills and encourages growth; continually works to improve supervisory skills., • Conflict Resolution - Encourages open communications; confronts difficult situations; maintains objectivity; keeps emotions under control., • Cost Consciousness - Works within approved budget; develops and implements cost saving measures; contributes to profits and revenue; conserves organizational resources., • Ethics - Treats people with respect; works with integrity and principles; upholds organizational values., • Organizational Support - Follows policies and procedures., • Attendance/Punctuality - Is consistently at work and on time; ensures work responsibilities are covered when absent., • Judgement - Displays willingness to make decisions; exhibits sound and accurate judgment., • Planning/Organizing - Prioritizes and plans work activities; organizes or schedules other people and their tasks., • Safety and Security - Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED); minimum two years related experience and/or training; or equivalent combination of education and experience. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills To perform this job successfully, an individual should have knowledge of Microsoft Excel and Word software and the Jacmar Food Service order processing system. Certificates, Licenses, Registrations Valid California driver license. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and walk. The employee is frequently required to use hands to finger, handle, or feel; reach with hands and arms; talk or hear and taste or smell. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, commercial ovens and oil fryers. The employee is occasionally exposed to extreme cold while in the walk-in refrigerator and extreme heat while in the kitchen area. The employee is occasionally exposed to chemicals while using cleaning and dishwashing products. The noise level in the work environment isoccasionally loud.

Job Description With over 58 stores and the largest avocational cooking program in the US, Sur La Table offers an unsurpassed selection of exclusive and premium-quality goods for the kitchen and table – and the culinary expertise and inspiration to go along with it. Whether the job entails interacting with our customers, driving digital growth, or providing vital behind-the-scenes support, we’re all here for the same reason – to roll up our sleeves and create happiness through cooking and sharing good food. Position Overview As a Store Floor Lead, Interim at Sur La Table, you play a key role in the success of the retail store by inspiring customers throughout every stage of their culinary experience. In this leadership role, the Store Floor Lead, Interim supports the General Manager (GM) or Store Manager (SM) in achieving sales and operational goals. As a key driver of in-store performance, Store Floor Lead, Interim serves as the Manager on Duty (MOD), ensuring smooth daily operations and always delivering a #bestincenter customer experience, a company-wide standard for excellence in service. Key ResponsibilitiesLeadership & Team Development · Lead the sales floor and oversee daily store operations as Manager on Duty (MOD). · Provides in-the-moment coaching and feedback to elevate performance and team engagement. Communicate performance issues directly to the General Manager/Store Manager. · Support onboarding, training, and development of new associates. Customer Experience & Brand Representation · Represent Sur La Table’s brand and culture by creating memorable, educational experiences that inspire repeat visits and customer loyalty. · Maintains expertise by staying current on products, actively engaging in available training, and independently seeking out additional resources. · Ensure exceptional customer experience by leading a customer-focused, Guest Obsessed culture. · Address customer concerns and resolve issues in a timely manner to maintain satisfaction and loyalty. Sales & Business Performance · Support the achievement of store sales goals through effective customer engagement and team motivation. · Maximize selling opportunities by identifying customer needs and offering relevant solutions. · Consistently meet or exceed monthly sales goals, contributing to overall store revenue. Performance is measured by key KPIs such as individual sales volume, average transaction value, and customer conversion rates. Operations & Compliance · Direct employees to ensure appropriate merchandise stock levels and that the selling floor is adequately stocked and merchandised in accordance with visual standards. · Complete inventory transactions including, but not limited to, receiving, MOS (Mark Out of Stock), and RARs (Return Authorization Requests). · Adhere to applicable wage and hour laws. Accurately records time worked according to SLT Policy. · Models and ensures all Sur La Table policies and standard operating procedures (SOPs) are communicated effectively to associates, maintained and consistently followed. Physical Requirements · Ability to communicate verbally and work cooperatively with associates and customers. · Ability to remain standing for up to 4 hours at a time. · Ability to move about the store coaching and directing associates; selling to customers and retrieving merchandise from stockroom or sales floor. · Ability to grab, reach, push, pull, bend, stoop, kneel, and crouch to retrieve and replenish merchandise from stockroom or sales floor. · Ability to lift and/or move merchandise weighing up to 50 lbs. · Ability to ascend/descend ladders to retrieve and/or move merchandise. · Ability to operate a computer, POS system, keyboards, merchandise scanners and mouse to accomplish work. · Workweeks are expected to be between 20 and 25 hours with the ability to have a flexible schedule, including nights, weekends, and holidays. · Regular and predictable attendance. Qualifications & Experience · Must be 21 years of age or older at the time of employment. · 1 year of retail management experience, preferably in a specialty or culinary retail environment. · Strong leadership skills with the ability to inspire, develop, and retain a high performing team. · Excellent communication, problem-solving, and decision-making abilities. · Passion for community engagement and providing exceptional customer experiences. · Proficiency in Microsoft Office and retail management systems preferred. This job description represents a summary of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. Responsibilities, tasks, and duties of the jobholder might differ from those outlined in the job description and other duties, as assigned, may be part of the job. This job description is not an employment agreement or contract. Sur La Table has the exclusive right to alter this job description at any time without notice. The CSC family of brands provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, provincial, state or local laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us. Washington state applicants only: If you believe that this job posting does not comply with applicable Washington state law, please notify us by sending an email to WACandidates@cscshared.com. It is unlawful in Massachusetts to require or administer a lie-detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. The CSC family of brands is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures. If you need assistance or an accommodation due to a disability, please contact hrbenefits@cscshared.com. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionJob Description General Manager JOB DUTIES • Operate all equipment, Stock ingredients from delivery area to storage, work area, walk-in cooler, Prepare all products, Use all proprietary technology, Receive and process telephone orders, Take inventory and complete associated paperwork, Clean equipment and facility approximately daily, Responsible for Orientation to any new hires as well as continued on the job training for all other employees on store products and procedures, Responsible for inventory counts, Responsible for making the schedule and staffing the store, Responsible for running food and labor while they are in charge of their shift, Must have good communication Skills in order to lead an effective team, Ability to comprehend and give correct written instructions, Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. ESSENTIAL FUNCTION/SKILLS Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to make precise movements rapidly and accurately with speed. Ability to enter orders using a computer keyboard or touch screen. Work Conditions EXPOSURE TO: Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from over up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING: Talking and hearing on the telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERMENTS: The ability to direct activities, perform repetitive tasks, work along and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. STANDING: Most tasks are performed from a standing position. Walking surfaces include ceramic tile “bricks” with linoleum in some food process areas. Height of work surfaces is between 36” and 48”. WALKING: Walking is generally in short distances for short durations.Delivery personnel must travel between the store and the delivery vehicle and from the delivery vehicle to the customer’s location. SITTING: Paperwork is normally completed in an office at a desk or table. LIFTING: Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3’ x 1.5’. Cases are usually lifted from floor and stacking onto shelves up to 72” high. CARRYING: Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried form the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances and weigh approximately 12 pounds per tray.During delivery, carry pizzas, sides, and beverages while performing “walking” and “climbing” duties. DRIVING: Deliver pizzas within a designated delivery area. A team member may make several deliveries per shift. PUSHING: Pushing is performed to move trays which are placed on dollies. A stack of trays on a dolly is approximately 24”-30” and requires a force of up to 7.5 pounds to push. Trays may also be pulled. CLIMBING: Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. During delivery of product, navigation of five or more flights of stairs may be required. STOOPING/BENDING: Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 40-45 seconds at a time, repeated continuously during the day. Forward bending is also present at the front counter when stocking ingredients. CROUCHING/SQUATTING: Performed occasionally to stock shelves and to clean low areas. REACHING: Reaching is performed continuously; up, down, and forward. Workers reach above 72” occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. HAND TASKS: Eye-hand coordination is essential. Use of hands is continuous during the day. Frequently activities require use of one or both hands. Shaping pizza dough requires frequent and forceful use of forearms and wrists. Workers must manipulate a pizza peel when removing a pizza from the oven., and when using the rolling cutter. Frequent and/or forceful pinching is required in the assembly of cardboard pizza boxes. Team members must be able to grasp cans, the phone, the pizza cutter and pizza peel, and pizza boxes. MACHINE, TOOLS, EQUIPMENT, WORK AIDS: Team members may be required to utilize pencils/pens, computers, telephones, calculators, TDD equipment, pizza cutter and pizza peel. TECHNOLOGY: All employees must use any and all Domino’s technology implemented by the Company. All drivers must use the Driver app, All CSR must make use of the Dominos Digital Shoulder surf (DSS), All employees must use the Domino’s Car Side Delivery. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by over $1 billion in total funding from leading investors including Altimeter Capital, ICONIQ, Kleiner Perkins, Lightspeed Venture Partners, Redpoint Ventures, and T. Rowe Price — and with over $1 billion in signed contracts across commercial and US government customers, we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches in 2027 and plans to scale to 100 satellites a year, we're Building Bigger — helping develop the solar system and build toward a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a high-growth Series D-funded company, we'd love for you to apply. The Role The software team at K2 strives to blur the lines between the various types of software development and encourages team members to get into parts of the stack they may not otherwise have experience with. This spectrum includes HDL programming (VHDL, SystemVerilog), embedded software on microcontrollers (Rust, C++), operating systems (Rust, C++, C), application software on flight computers (Rust, C++), GNC algorithms (Rust, C++), to test systems (Python), and many things inbetween. By doing this, we create a stronger team with more capable engineers. For now, this does not include front-end, artificial intelligence, or machine learning development. As a part of the team, you will be responsible for the development and verification of FPGA firmware used to fly some of the largest spacecraft that have ever been flown. You will be able to write mission-critical code that controls propulsion systems, attitude control systems, RF systems, and power systems to ensure safe and reliable operation of the vehicle. In your first 6 months you will work with your team to develop core pieces of the FPGA architecture such as the strategies for fault tolerance, real-time control, high-speed data routing, and telemetry downlink. In your first year you will implement larger and more complex FPGA systems and begin verifying your code using both software and hardware in the loop simulators. In your first two years you will operate your code on multiple spacecraft, demonstrating robust performance in demanding missions. Responsibilities • Own the architecture and implementation of critical programmable logic systems across the spacecraft that support vehicle networking, RF systems, and real-time control of all spacecraft subsystems, • Implement these architectures in RTL using VHDL and SystemVerilog, • Verify and validate FPGA designs using a mix of simulation, bench-testing, and Hardware In The Loop testbeds, • Support integration, test, and troubleshooting efforts for FPGA designs across all levels of the spacecraft development and manufacturing, • Develop the tools and infrastructure to support rapid, high-reliability FPGA solutions across all subsystems Qualifications • Bachelor's degree in computer science, computer engineering, electrical engineering, math, or a STEM discipline or 3+ years of professional experience in software development, • 3+ years working with complex FPGA designs spanning digital, mixed signal, or RF applications, • Development experience with VHDL or SystemVerilog Nice to Have • Experience integrating logic onto Xilinx SoC platforms, • Experience with digital signal processing (DSP) fundamentals and implementing complex DSP logic and software defined radios on FPGAs, • Experience implementing high-speed SERDES interfaces such as Ethernet, PCIe, and JESD204C., • Experience with standard bus and streaming protocols such as AXI and AXI-Stream, • Experience with evaluating and integrating vendor/third party IP, • Experience with common scripting languages such as Python, TCL, and Bash, • Experience with Linux systems programming and driver development, • Experience with continuous integration and continuous delivery systems, • Experience building or working with hard real-time embedded systems (bare-metal or RTOS), • Basic knowledge of electronics, computer architecture, and control systems, • Experience with software verification and testing methods, • Experience with software and network performance analysis and debugging Compensation and Benefits: • Base salary range for this role is $120,000 – $225,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level, • Comprehensive benefits package including paid time off, medical/dental/vision/ coverage, life insurance, paid parental leave, and many other perks If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionAbout the Company e.l.f. Beauty's purpose is to make the world a better place for every eye, lip, and face. Our deep commitment to clean, cruelty free beauty at an incredible value has fueled the success of our flagship brand e.l.f. Cosmetics since 2004 and driven our portfolio expansion. Today, our multi-brand portfolio includes e.l.f. Cosmetics, e.l.f. SKIN, e.l.f. Hair, Well People, Naturium and rhode. In our Fiscal year 26, we had net sales of $1.6 Billion and our business performance has been nothing short of extraordinary with 7 consecutive years of net sales growth. This consistent, category-leading growth is a testament to the strength of our team, strategy, and portfolio of brands. Our total compensation philosophy offers every full-time new hire competitive pay and benefits, bonus eligibility (paid at 200% of target over the last seven fiscal years), equity, flexible time off, year-round half-day Fridays, and a hybrid 3 day in office, 2 day at home work environment. We believe the combination of our unique culture, total compensation, workplace flexibility and care for the team is unmatched across not just beauty but any industry. Visit our Career Page to learn more about our team: https://www.elfbeauty.com/work-with-us Position Summary: The Demand Planning Manager is responsible for developing and managing the Naturium forecasts for the international and domestic retail business segments. This includes establishing new ways of working with international counterparts to support the established strategy. Responsibilities: • Defining and executing the demand planning strategy for domestic and international retail channels, • Manage and communicate existing or potential business risk to service and working capital, • Accountable for the maintaining metrics behind supply chain planning analytics (e.g., forecast accuracy, bias, pareto of item/customer demand, etc.), • Create and implement statistically driven forecasting methods, • Process lead for establishing best practices with counter parts in sales, sales planning, and new product developmentRequirements:, • 2 to 5 years’ experience within Demand Planning, Supply Planning, or Supply Chain Analytics., • Operations experience in a food, CPG, or cosmetics manufacturing company of relevant size and complexity; >$50 million revenue, high-SKU, national distribution, big box retail customer base, and rapidly changing product line / SKU mix., • Cross-functional S&OP modeling and process leadership experience; inclusive of demand planning, supply planning, and product lifecycle management., • Demonstrated experience creating, implementing, and leading cross-functional business processes from a starting point of limited maturity and sophistication; experience managing cross-functional teams. Nimble and entrepreneurial in nature., • Experience building driver-based forecasts for a large SKU mix with complex product lifecycles, including incrementality, cannibalization, and volume recapture., • Bachelor’s Degree in Supply Chain, Engineering, Economics, or another analytical field preferred or equivalent experience., • Strong working knowledge of planning process within CPG, fashion, or seasonal products., • High drive for results and willing to work in a demanding & rapid paced environment., • Excellent communication skills both verbal and written., • Excellent analytical, follow-up, and attention to detail skills., • Ability to work autonomously across functions to meet deadlines and drive tasks to completion., • System implementation experience a plus., • Excellent Excel Skills and knowledge, • Access and SQL experience a plus, • Proficient in Microsoft Suite (Word and PowerPoint) The base salary range for this role is listed above. Total compensation includes base salary, annual company-based performance bonus, and equity. Under e.l.f.’s annual bonus program, employees are eligible to earn up to 200% of their target bonus when company performance exceeds defined goals. In addition, e.l.f. provides a variety of other benefits to employees, including medical, dental, and vision insurance, a retirement savings plan, gender neutral parental leave, and unlimited paid time off. The amount of total compensation (including base salary) offered will be based on a wide range of factors, including geographic location, experience, specific skills, and qualifications. Compensation components are subject to change at the company’s discretion This job description is intended to describe the general nature and level of work being performed in this position. It also reflects the general details considered necessary to describe the principal functions of the job identified, and shall not be considered, as detailed description of all the work required inherent in the job. It is not an exhaustive list of responsibilities, and it is subject to changes and exceptions at the supervisors’ discretion. e.l.f. Beauty respects your privacy. Please see our Job Applicant Privacy Notice (www.elfbeauty.com/us-job-applicant-privacy-notice) for how your personal information is used and shared. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Come be part of the nation's leading partner in home building, where we are helping the American dream become reality. You could be the next one delivering Americas future. Drives delivery vehicle and/or truck-trailer combination to transport material to customer sites. CDL driver operates vehicle weighing 26,000 lbs. or greater GVWR; vehicle 26,000 lbs. or greater towing a trailer that may exceed 10,000 lbs. Assists customers with unloading material safely and accurately, taking precautions to protect product and customer property. Required to use a hand-held device, except while driving, to ensure compliance with DVIR and HOS. Verifies order details and maintain log of deliveries, including amounts and/or weights, mileage and locations of deliveries. Check items against invoice to ensure accuracy of order. Acts as customer service liaison. Handles customer concerns and helps to resolve issues as they arise. Maintains service logs and pre/post trip inspection procedures. Requirements: High school diploma or General Education Degree (GED), 21+ years of age, a valid Class A CDL license. A minimum of one (1) year of driving experience. Two (2) years CDL driving experience preferred. Must be able to pass MVR report and obtain a DOT medical card. Forklift certification Knowledge of safety procedures while performing driving and materials handling tasks Good verbal and written communication skills Ability to read and understand maps, routes, road signs Excellent customer service skills Ability to apply common sense understanding to carry out route assignment Knowledge of basic math and measurement skills Work Environment / Physical Activity: The work environment and physical activity described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed within a production environment, subject to temperature variations, hazardous chemicals, mechanical parts, increased noise levels and dust. Must be able to lift and carry up to 100 pounds frequently and on occasion may be required to lift and carry, with assistance, up to 200 pounds. Must be able to physically operate crane equipment (climb up and down into cab or on top of truck and/or load, twist torso for 360 degree visibility, use arms to operate controls, etc.) Builders FirstSource is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status or status as an individual with a disability. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Builders FirstSource, please call (214) 765-3990 or email ADA.Accommodation@bldr.com. Pay Transparency Provision - English/Spanish

Job Description About US: Tryfacta is a leading, nationally renowned Workforce Management Solution provider for private &public sector firms across the US. We specialize in Healthcare, IT, Business Support, and Professional & Craft/Light Industrial ecosystems. Founded in March 1996, we have a presence in all 50 States. Tryfacta has been ranked number 1 as one of the fastest-growing companies by Inc. Magazine (Inc. 5000)! Tryfacta is certified by the Joint Commission for Healthcare Staffing Services & has numerous ISO Certifications that capture our commitment to continuous improvement. Job Summary: Tryfacta is seeking a Senior IT Enterprise Application Analyst for our client in Los Angeles, CA 90012. This is a temporary contract assignment. If you meet the qualifications listed below and are interested, please Apply Now! Job Diva ID: 26-04841 Position Title: Senior IT Enterprise Application Analyst Location: Los Angeles, CA 90012 Duration: 6 Months Work Schedule: 9/80 hybrid schedule (In office Monday and Tuesday) starting as early as 7:00 AM 4:45 PM with every other Friday off. Responsibilities for this position include, but are not limited to: Responsible for supporting Financial, Project Accounting, Inventory and Procurement modules in Oracle EBS versionR12.2 with technical and functional knowledge on business processes, configurations, and Oracle tools & technologies. Tools include (REQUIRED) OAF, Java, JDeveloper, Workflow, PL/SQL, SQL, APEX, Oracle Forms & Reports and BI/XML Publisher. This position is responsible for working with business users to understand business requirements, configure setups, design, build, i,ntegrate and implement solutions. Additional responsibilities include implementing new functionalities, participating in upgrading applications. Support Financial, Project & Grant Accounting, Inventory, and Procurement modules in Oracle EBS and particiupgrades upgrade and other projects Good understanding of the following modules required: • Financial, Project & Grants, • Inventory and Procurement, • Support Oracle EBS production issues & enhancements & projects Job Duties, • Performs technical configurations, customizations, and extends commercial off-the-shelf enterprise resource planning software in three or more modules and stand-alone applications., • Defines, designs, develops, and deploys enhancements and reports utilizing three or more modules and stand-alone applications; ensures compliance with applicable specifications and standards., • Provides resolution to tickets having significant impact with high visibility to multiple customers requiring lengthy or involved installation; may require action by several groups, multiple releases against one ticket, and complex back out procedures., • Troubleshoots software application problems; identifies, recommends, and implements system improvements, modifications, and upgrades involving three or more modules and stand-alone applications. Develops user and technical documentation and provides training to system users., • Researches, evaluates, tests and implements patches and system upgrades involving three or more modules and stand-alone applications., • Participates in professional group meetings; stays abreast of new trends and innovations in their area of responsibility., • Acts as Project Manager; plans, coordinates, and conducts projects within area of responsibility, including monitoring scope, quality, budget, and schedule., • Performs other related Information Technology Enterprise Application Analyst job duties as required. To be considered for this position, you should have: [Skills, Education, or Experience] Education and Experience: Bachelor's degree from an accredited college or university in a related field and six years of relevant experience; or Master's degree from an accredited college or university in a related field and six years of relevant experience. Required Knowledge of: Principles, practices, and procedures of Information Technology; operational characteristics, methods, and techniques to analyze, design, develop, test, and implement applications; tuning queries and reports; dynamic reports using multiple parameters; database security; technical framework for Enterprise Resource Planning and Human Resources systems to modify or extend functionality and integration with other applications; web services and different messaging protocols to develop and communicate data with clients and other applications; Information Technology methods and procedures, including systems life cycles and applications development; business knowledge of multiple modules; and current office technology and equipment. Required Skills and Abilities to: Provide technical system support across multiple modules; understand integration with other applications; responding, diagnosing, and resolving problems; analyze requirements, design, test, and implement system applications; provide training; plan and carry out a variety of assignments to meet business objectives under established guidelines; understand technical and business complexities across related modules and other applications; use independent judgment and exercise discretion; problem solve; prioritize and multi-task; communicate clearly and concisely, both verbally and in writing; establish and maintain effective working relationships with those contacted in the course of work; work independently and in a team environment; lead and train; and operate current office equipment including computers and supporting applications. PHYSICAL DEMANDS, WORK ENVIRONMENT, AND VISION REQUIREMENTS The physical demands and work environment characteristics described here are representative of those that must be met or may be encountered by an employee to successfully perform the job duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job duties. Physical Demands: The work requires some physical exertion such as long periods of standing; walking over rough, uneven, or rocky surfaces; recurring bending, crouching, stooping, stretching, reaching, or similar activities; recurring lifting of moderately heavy items such as personal computers and record boxes. The work may require specific, but common, physical characteristics and abilities such as above-average agility and dexterity. Work Environment: The work involves moderate risks or discomforts that require special safety precautions, e.g., working around moving parts, carts, or machines, or irritant chemicals; etc. Employees may be required to use protective clothing or gear such as masks, gowns, coats, boots, goggles, gloves, or shields. Desires Experience Below: • Bachelor's degree from an accredited college or university in a related field and six years of relevant experience; or Master's degree from an accredited college or university in a related field and six years of relevant experience., • 3 years' experience in Module: Project and grants management - REQUIRED, • Experience: Tools include OAF, Java, JDeveloper, Workflow, PL/SQL, SQL, APEX, Oracle Forms & Reports and BI/XML Publisher REQUIRED, • Valid California Class C Driver License that allows you to drive in the course of your employment. Tryfacta is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information.