Parts driver jobs in Modesto, CaliforniaCreate job alerts

Job DescriptionHolt of California is proud to be part of the elite group of Caterpillar dealers worldwide. We sell service and rent a wide-variety of equipment Including Large and Small Construction Tractors, Forklifts, and Prime/Stand-by-Power Generation. THIS POSITION IS LOCATED IN Salida, CA. POSITION SUMMARY Repairs and maintains all types of rental equipment, which includes driving to machine location. QUALIFICATIONS REQUIREMENTS The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DUTIES AND RESPONSIBILITIES • Drives to machine location., • Handles all types of field service calls., • Disassembles unit and inspects parts for wear., • Repairs, overhauls, or replaces:, • Pistons, rods, gears, valves, and bearings., • Replaces carburetors, blowers, generators, starters, pumps, and distributors., • Repair leaks in radiator., • Repair or adjust headlights, radios, heaters, mirrors, and windshield wipers., • Working knowledge of ignition system, lights, and instrument panels., • Realigns and adjusts brakes., • Writes service reports., • Orders parts., • Other duties as assigned.SKILLS, • Ability to read and comprehend simple instructions, short correspondence and memos., • Ability to write service reports., • Ability to effectively present information in one-on-one and small group situations to customers and other employees of the organization., • Ability to add, subtracts, multiply and divides in all units of measure, using whole numbers, common fractions, and decimals., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. EDUCATION AND/OR EXPERIENCE High school or GED and/or five years of equipment experience are required. CERTIFICATES, LICENSES, REGISTRATIONS Must have a valid driver license class C or higher. Must have a clean D.M.V. report. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk and use hands and fingers to handle and feel objects, tools, and controls and to reach with hands and arms. The employee is frequently required to climb or balance and talk or hear. The employee is occasionally required to sit, stoop, kneel, crouch or crawl. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 100 pounds, and occasionally lift and/or move more than 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is regularly exposed to fumes or airborne particles. The employee frequently works in outside weather conditions and is occasionally exposed to toxic or caustic chemicals and vibration. The employee occasionally works in high, precarious places. The noise level in the work environment is usually moderate. COMPENSATION Pay Range: $36.00 - $38.00 Hourly Pay Range Dependent on Knowledge, Skills, and Ability to perform the responsibilities of the job. Why Work for Holt? Competitive hourly rate of pay with excellent company paid benefits including medical, dental, vision, life insurance, long-term disability, 401(k), profit sharing, nine paid holidays, paid vacation, and paid sick time. Career advancement opportunities and ongoing professional development. Holt is an Equal Opportunity Employer M/F/V/DV. Holt provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, national origin, physical or mental disability, all applicable veteran status or disabled veteran status. For more information about our California Employee Privacy Policy, please click on link below. Privacy Policy #zip \nCompany Description People come first at Holt of California. Whether you are a customer or employee, we strive to meet your needs to the best of our abilities. It takes a special combination of productivity and safety to provide our customers with superior customer service while ensuring our employees go home safe every day. The safety of our employees is one of the highest priorities we place on our company culture and comes through in our Vision Zero initiative. Vision Zero has the goal to have zero injuries and incidents without sacrificing quality and productivity. Holt of California understands that what happens at work can affect you at home and vice versa. We strive to provide our employees with a safe, enjoyable work environment that extends through to the benefits we offer to them and their families. It’s important to us that our employees know things are taken care of at home so they can focus on the job at hand when at work. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. People come first at Holt of California. Whether you are a customer or employee, we strive to meet your needs to the best of our abilities. It takes a special combination of productivity and safety to provide our customers with superior customer service while ensuring our employees go home safe every day.\r\n\r\nThe safety of our employees is one of the highest priorities we place on our company culture and comes through in our Vision Zero initiative. Vision Zero has the goal to have zero injuries and incidents without sacrificing quality and productivity.\r\n\r\nHolt of California understands that what happens at work can affect you at home and vice versa. We strive to provide our employees with a safe, enjoyable work environment that extends through to the benefits we offer to them and their families. It’s important to us that our employees know things are taken care of at home so they can focus on the job at hand when at work.\r\n\r\nEqual Opportunity Employer/Protected Veterans/Individuals with Disabilities\r\n\r\nThe contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information.

Job Description About the job The Role This position will report to: Bivio Supervisor Travel Requirements: Based on Business needs 7-10% FLSA Status: Non - Exempt Employment Category: Full - Time Regular Shift: 1 Pay Range: $24.45/HR - $34.80 /HR Onsite Position Bronco Wine Company founded in 1973, our family-owned company strives to continue and improve upon being vertically integrated, from the vineyard to the table, focusing on crafting quality wines for every table. Our family’s resilience and sustained growth will continue to be fostered through stewardship of family, valued employees, respected partners, and future generations. JOB STATEMENT: The Fleet Mechanic III is responsible for maintaining the safe and efficient operating capabilities for the BIVIO transportation fleet. This is accomplished in part by performing and overseeing inspections, routine maintenance, repairs, and record keeping for the fleet. Further, by providing training and guidance for the Fleet Mechanics I & II. The fleet Mechanic III is expected to perform their duties with minimum supervision. ESSENTIAL DUTIES: • Follow company safety practices and procedures., • Perform BIT inspections, • Perform preventative maintenance services, • Follow company policies and procedures, adhering to all federal, state, OSHA, CALOSHA, DOT, EPP, and DMV, CHP, laws and regulations., • Inspect, diagnose, service, and repair systems and components associated with the fleet vehicles and equipment., • Conduct truck/tractor/trailer maintenance & safety inspections., • Perform repairs by adjusting or replacing defective components., • Uses sound judgment in determining the extent of the needed repairs., • Perform repairs in accordance with manufactures/department specifications., • Track, document, and maintain maintenance records and forms., • Track recalls, smog inspections, and warranties., • Apply for purchase requisitions/POs in IFS for parts and repairs., • Document and maintain a vehicle status log, coordinating with the fleet operational supervisors as to the status of each vehicle’s location and availability., • Maintain an adequate innovatory of replacement parts, lubricates, fluids, and related items., • Keep an inventory of tools and supplies., • Perform roadside service calls., • Coordinate and meets with tow truck service., • Shuttle vehicles to and from both onsite and offsite locations., • Deliver and pick up parts and/or rental vehicles from offsite facilities., • Provide training, guidance, and oversight for the Fleet Mechanics I & II., • Dispose of failed parts, fluids, and wastes in accordance with company policies., • Keeps shop tools and equipment in in a clean and orderly fashion., • Other duties as assigned by supervision or management. Job Requirements: • Knowledge of methods, practices, materials, and tools of the trade., • Knowledge and familiarity with outside repair agencies that are capable of repairing fleet vehicles and equipment., • Principles and practices of gasoline and diesel repair and maintenance., • Office and computer skills: filing, scanning, copying, etc., • Speak and write in English., • Work various shifts., • Comprehend and follow orders., • Supervise and train subordinate staff. Educations / Experience: • High school diploma., • 4 years of journey level Mechanic experience with medium to heavy gas and diesel vehicles., • 1 years of supervisory experience., • Automotive Service Excellence (ASE) certification for medium – heavy truck diesel engines (T2) is desirable. License Requirements: • California Class A commercial driver license (airbrake, manual transmission, tanker). Physical Requirements: • Lift up to 50 lbs., • Claiming in and out of truck cabs, cargo bays, and tanker ladders., • Standing/Bending/Twisting/Walking/Sitting Work Environment: Indoor/outdoor Personal Protective Equipment required: Safety glasses, safety vest, proper footwear. production areas require head/ear protection. WHAT WE OFFER: At Broco Wine Company, we understand that our success is driven by our talented, committed workforce. We value the contributions each employee makes to our achievements, and our aim is to offer a comprehensive benefits program that is competitive, helping us attract and retain top talent. Our Benefits are crafted to support the needs of our employees and their families, ensuring the package is simple to understand, easy to access, and affordable for all. • Medical, • Dental, • Vision, • Life and AD&D, • Voluntary life and AD&D, • Group Short-Term Disability, • Group Long-Term Disability, • Voluntary Critical Illness, • Voluntary Accident & Injury, • Flexible Spending Accounts, • Employee Assistance Program, • 401K, • Paid time off EEO STATEMENT: Bronco Wine Company is dedicated to fostering a diverse and inclusive workplace and takes pride in being an equal opportunity employer. All qualified candidates will be considered for employment without discrimination based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability status, protected veteran status, genetic information, or any other characteristic safeguarded by law. We are committed to cultivating an environment where every individual feels valued, respected, and empowered to reach their full potential. Reasonable Accommodations: We will provide reasonable accommodations to assist individuals with disabilities in performing essential job functions. If you wish to apply for a position at Bronco Wine Company and require special assistance during the application process, or if you believe you do not meet the necessary qualifications for a posted position due to a protected disability and would like to discuss potential accommodations, please reach out to our Human Resources at HR@broncowine.com for further assistance or guidance. Recruitment Agencies Bronco Wine Company does not accept unsolicited agency resumes. Bronco Wine Company is not responsible for any fees related to unsolicited resumes.

Job DescriptionDescription: Job Title:Commodity Fumigator-QAC/QAL Department:Receiving Report To: Receiving Manager Working Hours: Schedule may vary depending on company needs Work Location: Plant – HQ 2288 Geer Road Hughson JOB SUMMARY Commodity Fumigator is a senior-level role in pest control and logistics, responsible for overseeing fumigation operations for agricultural, food processing, or export commodities. This position ensures compliance with safety, regulatory, and operational standards while coordinating with multiple departments. Commodity Fumigator manages the safe and efficient fumigation of commodities such as grains, fruits, or other perishable goods, often in silos, warehouses, or export facilities. The role blends logistics, safety compliance, and technical fumigation expertise to protect products from pests while meeting food safety and export requirements. ESSENTIAL FUNCTIONS -Supervise fumigation schedules, coordinate with all depts and ensure proper fumigant use based on requirements -Ensuring proper sealing and containment of fumigants to maximize effectiveness. -Inspecting facilities and commodities for pest infestations before and after treatment. -Maintaining detailed records of fumigation activities and compliance with safety regulations. -Operating specialized equipment and monitoring environmental conditions during treatments -Communicating supply needs back to management to allow for timely ordering. -Interaction with Sanitation / Pest Control Supervisor, FSQA Manager, Operators, Co-workers. -Clean and remove pesticides after application as well as cleaning the worksite after completion of job. -Follows and ensures adherence to established Grower Direct Nut Co., local, state, and federal regulations and requirements as well as food safety, sanitation, food production and nutritional guidelines. -Established and ensures adherence to procedures and standards, which are in agreement with these regulations, requirements and guidelines. Additional functions if applicable (review below) -Handle the proper application of crop protection products. -Monitor pest activity in all GDN facilities. -Operate all fumigation equipment -Maintain all fumigation equipment calibrated and ready for use on a daily basis -Mix, load, and apply pesticides/fertilizers -Perform daily vehicle inspections -Handle packaged chemicals -Clean and maintain equipment. -Maintain application/spray records. -Operation of application equipment – training provided. -Operate forklift occasionally Requirements: PHYSICAL DEMANDS • Will frequently stand, walk, use hands to finger, handle and feel, reach with hands and arms, talk and hear, taste and smell., • Travel between the two Facilities., • Will occasionally sit and occasionally climb or balance and stoop, kneel crouch or crawl., • Must use both hands for rapid mental muscular coordination, simultaneously., • Must be able to reach high and low levels, frequently., • Must be able to push/pull/lift with arms below waist/at shoulder/above shoulder level up to 35 pounds frequently., • Must lift with arms up to floor to waist, waist to shoulder 35 pounds., • Must be able to constantly stand/stoop/walk/bend, up to 12 hrs., • Ability to strenuously flex/grip with wrist/hands frequently (15 flexion/minute). WORK ENVIRONMENT • May work near moving mechanical parts., • May work around wet or humid conditions, in high, precarious places, fumes or airborne particles, outdoor weather conditions, extreme cold (non-weather), extreme heat (non-weather), risk of electrical shock, and/or risk of vibration. QUALIFICATIONS/SKILLS 1.Pest Control-QAL/QAC Certification required 2.Ability to work as part of a team. 3.Excellent communication skills. 4.Ability to perform basic math functions. 5.Must be able to work overtime and/or weekends as needed. 6.Have a valid CA driver license without restrictions. 7.Chemical application education preferred. 8.Previous application experience preferred.

The Fleet Mechanic III is responsible for maintaining the safe and efficient operating capabilities for the BIVIO transportation fleet. This is accomplished in part by performing and overseeing inspections, routine maintenance, repairs, and record keeping for the fleet. Further, by providing training and guidance for the Fleet Mechanics I & II. The fleet Mechanic III is expected to perform their duties with minimum supervision. Essential duties include: • Follow company safety practices and procedures., • Perform BIT inspections, • Perform preventative maintenance services, • Inspect, diagnose, service, and repair systems and components associated with the fleet vehicles and equipment., • Conduct truck/tractor/trailer maintenance & safety inspections., • Perform repairs by adjusting or replacing defective components., • Uses sound judgment in determining the extent of the needed repairs., • Perform repairs in accordance with manufacturers/department specifications., • Track, document, and maintain maintenance records and forms., • Track recalls, smog inspections, and warranties., • Apply for purchase requisitions/POs in IFS for parts and repairs., • Document and maintain a vehicle status log, coordinating with the fleet operational supervisors as to the status of each vehicle's location and availability., • Maintain an adequate inventory of replacement parts, lubricates, fluids, and related items., • Keep an inventory of tools and supplies., • Perform roadside service calls., • Coordinate and meet with tow truck service., • Shuttle vehicles to and from both onsite and offsite locations., • Deliver and pick up parts and/or rental vehicles from offsite facilities., • Provide training, guidance, and oversight for the Fleet Mechanics I & II., • Dispose of failed parts, fluids, and wastes in accordance with company policies., • Keeps shop tools and equipment in a clean and orderly fashion., • Other duties as assigned by supervision or management. Job requirements include: • Knowledge of methods, practices, materials, and tools of the trade., • Knowledge and familiarity with outside repair agencies that are capable of repairing fleet vehicles and equipment., • Principles and practices of gasoline and diesel repair and maintenance., • Office and computer skills: filing, scanning, copying, etc., • Speak and write in English., • Work various shifts., • Comprehend and follow orders., • Supervise and train subordinate staff. Educations/experience: • High school diploma., • 4 years of journey level Mechanic experience with medium to heavy gas and diesel vehicles., • 1 years of supervisory experience., • Automotive Service Excellence (ASE) certification for medium heavy truck diesel engines (T2) is desirable. License requirements: • California Class A commercial driver license (airbrake, manual transmission, tanker). Physical requirements: • Lift up to 50 lbs., • Climbing in and out of truck cabs, cargo bays, and tanker ladders., • Standing/Bending/Twisting/Walking/Sitting Work environment: • Indoor/outdoor, • Personal Protective Equipment required: Safety glasses, safety vest, proper footwear. Production areas require head/ear protection. What we offer: • Medical, • Dental, • Vision, • Life and AD&D, • Voluntary life and AD&D, • Group Short-Term Disability, • Group Long-Term Disability, • Voluntary Critical Illness, • Voluntary Accident & Injury, • Flexible Spending Accounts, • Employee Assistance Program, • 401K, • Paid time off EEO statement: Bronco Wine Company is dedicated to fostering a diverse and inclusive workplace and takes pride in being an equal opportunity employer. All qualified candidates will be considered for employment without discrimination based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability status, protected veteran status, genetic information, or any other characteristic safeguarded by law. We are committed to cultivating an environment where every individual feels valued, respected, and empowered to reach their full potential. Reasonable accommodations: We will provide reasonable accommodations to assist individuals with disabilities in performing essential job functions. If you wish to apply for a position at Bronco Wine Company and require special assistance during the application process, or if you believe you do not meet the necessary qualifications for a posted position due to a protected disability and would like to discuss potential accommodations, please reach out to our Human Resources at HR@broncowine.com for further assistance or guidance.

Job DescriptionDescription: Forklift Operators perform a combination of product handling and forklift operating duties to stack, transport, and store work-in-process and finished goods. Supplies production lines with efficient flow of materials and moves finished goods. Complete line driver reports accurately and legible showing locations and quantities of raw materials used as well as quantities and locations where finished goods were stored. Requirements: ESSENTIAL FUNCTIONS • Follow all established safety, health, quality GMP and Company policies, procedures and recognized practices., • Perform a safety forklift inspection and battery check and report any equipment malfunctioning or damage to Napasol Supervisor and Maintenance staff. Fill out forklift status report., • Participate in continuous quality improvement projects and other related activities as assigned., • Review daily production schedule with Napasol Supervisor, brings materials to the production lines when needed to execute schedule. Removes finished goods from production lines, back to assigned locations., • Provide accurate information of unloaded materials as well as materials used or produced to Napasol Supervisor., • Maintain accurate records of materials being used and produced, and reports them in appropriate paperwork, back to the Napasol Supervisor., • Remove finished goods and other materials in hold to assigned location. Stores finished goods stacked neatly and in proper height. Verifies that all finished goods removed from the production area must have a product code tag., • Follow established forklift procedures and complete required safety and maintenance checklists, • Follow established procedures for damaged finished goods and raw materials and report them on line driver report., • Communicate with Napasol Supervisor regarding shift totals and machine totals reports and with other forklift operators regarding any changes or problems that arise, including damaged materials, or low inventories., • Complete written documentation as required., • Assist in relieving downstream teammates for breaks and lunches., • Visually inspect all completed pallets of product for quality and conformity to the packaging instructions to ensure quality at the source., • Follows and ensures adherence to established Grower Direct Nut Co., local, state, and federal regulations and requirements as well as food safety, sanitation, food production and nutritional guidelines., • Established and ensures adherence to procedures and standards, which are in agreement with these regulations, requirements and guidelines. OTHER RESPONSIBILITIES Responsibilities are not limited to the above mentioned and may include assisting other departments within reasonable and related tasks. PHYSICAL DEMANDS Physical demands • Will occasionally stand, walk, use hands to finger, handle and feel, reach with hands and arms, talk and hear, taste and smell., • Will frequently sit and occasionally climb or balance and stoop, kneel crouch or crawl., • Must use both hands for rapid mental muscular coordination, simultaneously., • Must be able to reach high and low levels, frequently., • Must be able to push/pull/lift with arms below waist/at shoulder/above shoulder level up to 30 pounds frequently., • Must lift with arms up to floor to waist, waist to shoulder 30 pounds., • Must be able to constantly stand/stoop/walk/bend, up to 12 hrs., • Ability to strenuous flex/grip with wrist/hands frequently (15 flexion/minute). Work environment • May work near moving mechanical parts., • May work around wet or humid conditions, in high, precarious places, fumes or airborne particles, outdoor weather conditions, extreme cold (non-weather), extreme heat (non-weather), risk of electrical shock, and/or risk of vibration. QUALIFICATIONS/SKILLS • Ability to work as part of a team., • Excellent communication skills., • Ability to perform basic math functions., • Must be able to work overtime and/or weekends as needed., • At least 2 years of forklift driving experience., • Machine operating experience., • Ability to work with little to no supervision., • Previous warehouse experience., • Debe tener una licencia de conducir válida de CA sin restricciones

Job Description POSITION SUMMARY The Overhead Crane Technician is a hands-on field role responsible for troubleshooting, repairing, and maintaining overhead cranes, hoists, and related material handling equipment at customer sites, ensuring equipment operates safely and efficiently to meet customer production demands. This position performs preventive maintenance, inspections, and repairs on mechanical, electrical, and control systems, documents work accurately, and represents CraneTech professionally at customer facilities across a variety of industrial environments. CraneTech is a National Safety Council member and holds its inspections to CMAA standards, not just baseline OSHA/ANSI compliance, and this role is central to that standard. Many of CraneTech's Site Lead Technicians, Branch Managers, and NACB Technical Trainers started their careers as Overhead Crane Technicians — strong performers have a real path to grow within CraneTech, NACB, or Hunter Lift. WHAT STEEL RIVER OFFERS • Medical coverage through Cigna, with a choice of three plan levels including an HSA-eligible option, plus dental coverage through Guardian (with an option that includes orthodontia) and vision coverage through Guardian VSP., • Company-paid Basic Life and AD&D insurance, with voluntary options for supplemental life, short- and long-term disability, critical illness, accident, and hospital indemnity coverage., • A 401(k) plan through Fidelity Investments with a company match — 100% of the first 3% and 50% of the next 2% of what you contribute — and eligibility to enroll on the first of the month after you're hired., • Free, confidential counseling, legal, financial, and work-life support through the company's Employee Assistance Program, telemedicine covered in full, and a company wellness program., • Paid time off that grows with your tenure, plus paid company holidays (including Veterans Day for veteran and active-duty employees)., • An annual $200 boot and tool reimbursement, plus a $150 annual safety glasses reimbursement., • A company vehicle, tools, and a company-provided phone or tablet to do the job — you're not buying your own equipment for this work., • Overtime pay for hours worked beyond a standard 40-hour week (including Saturdays), and double pay (2x) for any hours worked on a Sunday. ESSENTIAL DUTIES & RESPONSIBILITIES The functions below are essential to this position. This list is representative, not exhaustive; the employee may perform other related duties as assigned. • Perform preventive maintenance, inspections, troubleshooting, and repairs on overhead cranes, hoists, and related material handling equipment at customer sites., • Diagnose and repair mechanical, electrical, and control system issues, including motors, drives, variable frequency drives (VFDs), brakes, wire rope, and rigging hardware., • Perform periodic and frequent inspections in accordance with CMAA, OSHA, and ANSI standards, evaluating equipment condition and documenting findings and safety recommendations for customers., • Complete accurate, timely electronic service reports, inspection checklists, and time entries using a company-provided phone, computer, or tablet and associated software., • Respond to preventive maintenance visits, scheduled repairs, and emergency service calls, working to safely restore customer equipment to operation, including temporary repairs while parts are sourced when needed., • Assist with the installation, modernization, and commissioning of new or upgraded crane and hoisting equipment, including retrofits and safety upgrades., • Maintain the company vehicle, tools, and parts inventory necessary to complete assigned service work., • Communicate directly and professionally with customers on-site to explain findings, repair options, and safety concerns., • Collaborate with the Site Lead Technician, Service Coordinator, and branch team to plan daily work assignments and ensure jobs are completed safely, on time, and to customer expectations., • Identify potential additional service, repair, or sales opportunities observed during customer visits and communicate them to the service or sales team., • Follow all company and OSHA safety protocols — including lockout/tagout, fall protection, and required PPE use — in shop and field environments., • Travel to customer sites within the assigned service territory, including overnight travel as needed, to deliver timely service and support. QUALIFICATIONS Education & Experience • No specific college degree is required for this role — Steel River provides comprehensive hands-on training regardless of your educational background., • High school diploma or equivalent required; technical or trade school training in industrial electrical, mechanical systems, or a related field preferred., • 3+ years of experience as a crane service technician or in a related trade (electrical, mechanical, industrial maintenance) required. Certifications & Licenses • Valid driver's license in good standing required., • OSHA 10/30 preferred; relevant crane/rigging inspection certifications (e.g., NCCCO) preferred., • This position is subject to Department of Transportation (DOT) regulations: must pass a pre-employment DOT drug screen and DOT physical, and maintain a current Driver Qualification (DQ) file and DOT medical certification for the duration of employment in this role. Knowledge, Skills & Abilities • Strong working knowledge of electrical, mechanical, and control systems as applied to overhead cranes and hoists, including single- and three-phase power, AC/DC motor controls, and VFDs., • Ability to learn and apply new mechanical, electrical, and industrial skills as equipment and technology evolve., • Comfortable working at significant heights and in a variety of industrial production environments., • Strong verbal and written communication skills for documenting service work and interacting professionally with customers., • Proficient with a company-provided phone, computer, or tablet and software to complete electronic forms and reports., • Strong safety mindset with working knowledge of OSHA/ANSI standards., • Ability to work independently with minimal supervision while on customer sites., • Willingness and ability to work extended hours, weekends, and holidays, and to travel overnight, as needed. WORK ENVIRONMENT Profile A — Field & Shop Technical Role This position operates in a combination of shop and field environments typical of overhead crane and material handling equipment service. Work is performed inside industrial facilities — manufacturing plants, steel mills, warehouses, and distribution centers — as well as outdoors at construction sites and customer yards, with exposure to seasonal weather and temperature extremes. Employees regularly work at heights on crane bridges, runways, and platforms, and may use ladders, aerial lifts, or fall-protection equipment. The role involves working around heavy machinery, moving equipment, and suspended loads, with exposure to noise, dust, grease, and vibration. Some assignments require travel to customer locations, including overnight travel, and may include after-hours, weekend, or emergency/on-call response. Appropriate personal protective equipment (PPE) is required at all times in shop and field settings. TRAVEL REQUIREMENTS Travel is primarily local/regional to customer jobsites within the branch's service territory. Some assignments — including shutdowns, multi-day projects, or coverage in other territories — require overnight travel. REASONABLE ACCOMMODATION Steel River Companies is committed to providing reasonable accommodations to qualified individuals with disabilities to enable them to perform the essential functions of their role, consistent with the Americans with Disabilities Act (ADA) and applicable state and local law. Employees or candidates who require an accommodation should contact Human Resources. EQUAL EMPLOYMENT OPPORTUNITY Steel River Companies is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. ACKNOWLEDGMENT This job description is not intended to be an exhaustive list of all duties, responsibilities, and requirements associated with the role. Duties may change at any time with or without notice. I acknowledge that I have received, read, and understand this job description. \nCompany Description Our goal is to dive into businesses that protect America’s infrastructure and inject them with fresh energy and ideas while honoring the legacy of the amazing people that built them. We are committed to the long game and building a business that will stand the test of time. While we are relentless in our pursuit for improvement, we never lose touch with our roots. We measure results and use data as a tool but we continue to focus on the human elements of business. We will never compromise on our values, and are committed to creating win-win deals with all our partners. Our goal is to dive into businesses that protect America’s infrastructure and inject them with fresh energy and ideas while honoring the legacy of the amazing people that built them. We are committed to the long game and building a business that will stand the test of time.\r\n\r\nWhile we are relentless in our pursuit for improvement, we never lose touch with our roots. We measure results and use data as a tool but we continue to focus on the human elements of business.\r\n\r\nWe will never compromise on our values, and are committed to creating win-win deals with all our partners.

Job DescriptionDescription: Job type: Full-Time (Onsite) Pay: $25.00 - $30.00 per hour Shift: Rotational, 5:00 AM–1:30 PM for training. After the initial 3-month training period, the position will transition to a rotational shift schedule based on business needs. JOB SUMMARY A boiler mechanic/operator is responsible for maintaining the boilers, evaporator, chiller, and pasteurizer line and all associated equipment. ESSENTIAL FUNCTIONS · Operate steam generated boiler(s) and other steam system equipment and devices. · Schedule and perform preventative maintenance on steam generating boilers and other steam system equipment and devices. · Operate pneumatically activated valves (automatic and/or manually). · Operate mechanical valves and safety devices. · Perform boiler, steam generation system and devices safety procedures and timely inspections, required by the company and state of California compliance regulations and document them accurately. · To operate and maintain new boiler equipment, for optimum performance and efficiency. · Follows and ensures adherence to established Grower Direct Nut Co., local, state, and federal regulations and requirements as well as food safety, sanitation, food production and nutritional guidelines. · Established and ensures adherence to procedures and standards, which are in agreement with these regulations, requirements and guidelines. · Other Duties as assigned Requirements: PHYSICAL DEMANDS • Will frequently stand, walk, use hands to finger, handle and feel, reach with hands and arms, talk and hear, taste and smell., • Will occasionally sit and occasionally climb or balance and stoop, kneel crouch or crawl., • Must use both hands for rapid mental muscular coordination, simultaneously., • Must be able to reach high and low levels, frequently., • Must be able to push/pull/lift with arms below waist/at shoulder/above shoulder level up to 50 pounds frequently., • Must lift with arms up to floor to waist, waist to shoulder 50 pounds., • Must be able to constantly stand/stoop/walk/bend, up to 12 hrs., • Ability to strenuous flex/grip with wrist/hands frequently (15 flexion/minute). WORK ENVIRONMENT • May work near moving mechanical parts., • May work around wet or humid conditions, in high, precarious places, fumes or airborne particles, outdoor weather conditions, extreme cold (non-weather), extreme heat (non-weather), risk of electrical shock, and/or risk of vibration. QUALIFICATIONS/SKILLS 1. At least 3+ years of experience in boiler operation (experience is a plus on this job)., 2. Knowledge of general mechanical equipment maintenance., 3. Able to read and interpret schematics and diagrams (piping and pneumatic systems)., 4. Knowledge of pneumatic operated systems and devices., 5. Knowledge of California Code of Regulations Title 8 (Boiler and Fired Pressure Vessel Safety Orders)., 6. Boiler Operator certification (California) desirable., 7. Organized, methodic, efficient and eager to learn., 8. Safety and performance oriented., 9. Bilingual in English/Spanish a plus., 10. Must have a valid CA driver license without restrictions.

Job DescriptionDescription: Job type: Full-Time (Onsite) Pay: $25.00 - $30.00 per hour Shift: 1st Shift, 5:00 AM–1:30 PM for training. After the initial 3-month training period, the position will transition to a rotational shift schedule based on business needs. Job Overview We are seeking a skilled and dedicated Maintenance Mechanic to join our team. The ideal candidate will possess a strong mechanical knowledge and experience in facilities maintenance, ensuring that all equipment and systems are functioning optimally. This role requires a proactive approach to problem-solving and the ability to work independently as well as part of a team. Duties • Provides maintenance support in all production areas – packaging, cracker, roasters, butter, pasteurizer, inshell and sorting., • Work closely with Maintenance Supervisor to develop preventative maintenance programs and procedures to reduce mechanical downtime., • Maintain communications, oral and written, with maintenance/production team ensuring smooth shift transitions and accurately preparing work orders for equipment., • Troubleshoot and resolve basic to moderate operating difficulties involving area equipment and new equipment installations., • Proactive and accurate reporting of equipment breakage, maintenance requirements, and errors., • Inspects operating machines and equipment for conformance with operational standards. Respond to production needs as they occur on the production floor., • Updating and completing the required limble work order documentation of performed maintenance, labor hours, and parts used., • Basic computer skills to be able to update PM’s and run or revise reports., • Able to prioritize tasks in an efficient manner while understanding the urgency needed to complete tasks that interrupt operations., • Cut and weld metal to repair broken metal parts, fabricate new parts, and assemble new equipment., • Enter codes and instructions to program computer-controlled machinery., • Demonstrate equipment functions and features to machine operators., • As applicable refer to blueprints and manufacturer’s manuals to determine correct installation and operation of machinery., • Maintain a safe, clean, organized work area throughout the facility and common areas., • Maintain a collaborative relationship with other departments and co-workers., • Promote and maintain a positive and respectful work environment., • Follows and ensures adherence to established Grower Direct Nut Co., local, state, and federal regulations and requirements as well as safety, food safety, sanitation, food production and nutritional guidelines., • Other duties as required by management. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Schedule: • 8 hour shift, • Evening shift, • Monday to Friday, • Morning shift, • Overtime, • Weekends as needed Experience: • Maintenance: 2 years (Required) License/Certification: • Driver's License (Required) Ability to Commute: • Hughson, CA 95326 (Required) Ability to Relocate: • Hughson, CA 95326: Relocate before starting work (Required), • Work Location: In personRequirements: Qualifications • High school diploma or equivalent, • 3+ years of experience in a manufacturing environment is preferred., • Strong troubleshooting skills with mechanical, electrical, automation controls, lasers, hydraulic and pneumatic machinery., • Strong electrical background in addition to mechanical skills. Experience with computerized or automated controls and ability to read electrical schematics is a plus., • Self-motivated, detail oriented and ability to work in a fast-paced environment., • Willing to work any shift, including overtime and weekends as necessary., • Strong verbal and written communication skills; bilingual is a plus., • Demonstrated work history., • Able to evaluate a situation and make good decisions., • Able to work well with a team and individually., • Able to take directions as needed from management., • Must have a valid CA driver license without restrictions.

Job DescriptionCompany description Service Measure (SM) is a field data collection company founded in 2013 in New York. We collect data where automation is not possible. We count features, take pictures, make videos, record speech, and scan areas for every detail you need to make more informed decisions. Our field data collection teams are spread across Europe and North America, ready to accept new challenges. Project objective The goal of the project is to help collect images of streets, main points of interest and public areas in the USA. The project is performed on cars with 360 cameras mounted on top that image the area around the vehicle and store those images on computers inside the vehicle. Later, this data will be used to enhance one the most popular online maps in the world. The data collectors will be given specific routes around public streets and areas, specifically targeting commercial districts and historical sites. Due to poor weather conditions some areas will be visited multiple times in order to collect the best quality of imaging. The project is expected to last from 3 to 6 months and will cover different data collection areas. The ideal candidate enjoys driving, knows well the area, traffic trends, is highly responsible and reliable. The schedule expected on the project is Monday-Friday, 8 hours/day 40 hours per week. Due to weather downtime, work on weekends is possible. Company description Terry Soot Management Group (TSMG) is a field data collection company founded in 2017 in Europe. We collect data where automation is not possible. We count features, take pictures, make videos, record speech, and scan areas for every detail you need to make more informed decisions. Our field data collection teams are spread across Europe and North America, ready to accept new challenges. Project objective The goal of the project is to help collect images of streets, main points of interest and public areas. The project is performed on cars with 360 cameras mounted on top that image the area around the vehicle and store those images on computers inside the vehicle. Later, this data will be used to enhance one the most popular online maps in the world. The data collectors will be given specific routes around public streets and areas, specifically targeting commercial districts and historical sites. Due to poor weather conditions some areas will be visited multiple times in order to collect the best quality of imaging. The project is expected to last at least 3 months and will cover different city/state zones. The ideal candidate enjoys driving, knows well the area, traffic trends, is highly responsible and reliable. The schedule expected on the project is Monday-Friday, 8 hours/day 40 hours per week. You can work more than 8 hours if you will. Requirements: • Must have a valid Driver Licence;, • Good driving skills and clean driving record;, • General car knowledge would be a plus;, • Enjoys driving, within standard business hours;, • Available for a minimum of 3 months;, • Must have private monitored parking space for corporate vehicle;, • Great communication and reporting skills;, • Tech savvy (drivers will use Gmail, Google Forms and Google Meet);, • High level of responsibility;, • Self-motivated and detail oriented;, • Must be able to successfully pass a background check (criminal and driving record).Requirements, • Must have a valid Driver License (driving experience, 1-2 yrs minimum), • Must have parking for a vehicle, • Must be authorized to work in the US, • Must pass the background check, • Enjoys driving, with flexible schedule, • Available for a minimum of 3 months, • Responsible & Reliable, • Good driving skills, • Great communication skills, • High level of responsibility, • General car knowledge, • Tech savvy (smartphone and basic apps), • Basic computer skills, • Self-motivated and detailed oriented We would be happy to get to know you and your skills better and see how we can support each other's growth. Please apply and let's meet! We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionJob Description ABOUT THE JOB Do you know why Domino's Pizza hires so many drivers? Well, aside from the fact that our delicious pizza is the perfect solution for dinner for families all across the nation - we do it because we can. What do we mean by that, you ask? We mean that we offer a great flexible schedule that offers the hours you're looking for. That means you're free when you need to be. You'll have plenty of time left over for school, to hang with your friends, or whatever. Even if you need a second job for some extra cash, Domino's Pizza is the perfect place for you. Right now Domino's is looking for qualified drivers to staff stores in your area. We're growing so fast it's hard to keep up, and that means Domino's has lots of ways for you to grow (if that's what you want), perhaps to management, perhaps beyond. Whether it's your hobby, main-gig, or supplemental job, apply online. We're bound to have just the thing for you. JOB REQUIREMENTS AND DUTIES You must be 18 years of age and have a valid driver's license with a safe driving record meeting company standards as well as access to an insured vehicle which can be used for delivery. You should possess navigational skills to read a map, locate addresses within designated delivery area and must be able to navigate adverse terrain including multi-story buildings. . ADVANCEMENT Many of our team members began their careers as delivery drivers and today are successful Domino's franchise owners. From delivery driver to management, general manager to franchisee or Manager Corporate Operations, our stores offer a world of opportunity. DIVERSITY Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. SUMMARY STATEMENT We take pride in our team members and our team members take pride in Domino's Pizza! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's Pizza, our people come first! QUALIFICATIONS General job duties for all store team members Operate all equipment. Stock ingredients from delivery area to storage, work area, walk-in cooler. Prepare product. Receive and process telephone orders. Take inventory and complete associated paperwork. Clean equipment and facility approximately daily. Training Orientation and training provided on the job. Communication Skills Ability to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. WORK CONDITIONS Exposure to Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. Sudden changes in temperature in work area and while outside. Fumes from food odors. Exposure to cornmeal dust. Cramped quarters including walk-in cooler. Hot surfaces/tools from oven up to 500 degrees or higher. Sharp edges and moving mechanical parts. SENSING Talking and hearing on telephone. Near and mid-range vision for most in-store tasks. Depth perception. Ability to differentiate between hot and cold surfaces. TEMPERAMENTS The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgments and decisions. PHYSICAL REQUIREMENTS including, but not limited to the following: Standing Most tasks are performed from a standing position. Walking For short distances for short durations. Surfaces include ceramic tile "bricks" with linoleum in some food process areas. Height of work surfaces is between 36" and 48". Sitting Paperwork is normally completed in an office at a desk or table. Lifting Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'. Cases are usually lifted from floor and stacked onto shelves up to 72" high. Carrying Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. Pushing To move trays which are placed on dollies. A stack of trays on a dolly is approximately 24"- 30" and requires a force of up to 7.5 pounds to push. Trays may also be pulled. Climbing Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. Additional Information Stooping/Bending Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 30 - 45 seconds at one time, repeated continuously during the day. Forward bending is also present at the front counter and when stocking ingredients. Crouching/Squatting Performed occasionally to stock shelves and to clean low areas. Reaching Reaching is performed continuously; up, down and forward. Workers reach above 72" occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Hand Tasks Eye-hand coordination is essential. Use of hands is continuous during the day. Frequently activities require use of one or both hands. Shaping pizza dough requires frequent and forceful use of forearms and wrists. Workers must manipulate a pizza peel when removing pizza from the oven, and when using the rolling cutter. Frequent and/or forceful pinching is required in the assembly of cardboard pizza boxes. Team Members must be able to grasp cans, the phone, the pizza cutter and pizza peel, and pizza boxes. Machines, Tools, Equipment, Work Aids Team Members may be required to utilize pencils/pens, computers, telephones, calculators, TDD equipment, pizza cutter and pizza peel. DRIVING SPECIFIC JOB DUTIES Deliver product by car and then to door of customer. Deliver flyers and door hangers. REQUIRES Valid driver's license with safe driving record meeting company standards. Access to an insured vehicle which can be used for delivery. ESSENTIAL SKILLS Navigational skills to read a map, locate addresses within designated delivery area. Must navigate adverse terrain including multi-story buildings, private homes, and other delivery sites while carrying product. PHYSICAL DEMANDS Carrying During delivery, carry pizzas and beverages while performing "walking" and "climbing" duties. Driving Deliver pizzas within a designated delivery area. A Team Member may make several deliveries per shift. Walking Delivery personnel must travel between the store and delivery vehicle and from the delivery vehicle to the customer's location. Climbing During delivery of product, navigation of five or more flights of stairs may be required. WORK CONDITIONS Exposure To Varying and sometimes adverse weather conditions when delivering product, driving and couponing. SENSING Far vision and night vision for driving.

Job DescriptionRyan Herco Flow Solutions, a SunSource company, is a leading distributor of fluid control systems, fluid filtration systems, fluid handling products, micro-electronics, and general industrial supply. We sell to a broad base of customers in industries such as electronic component and equipment manufacturers, chemical manufacturers, water & waste treatment, metal finishing, pollution control and life sciences companies. www.rhfs.com We need a talented individual for a Warehouse Driver/Associate for Ryan Herco Flow Solutions. Responsibilities: Provide frontline customer service at “Will-Call" counter, entering orders and answers questions and sells parts using friendly customer service skills Pulls, packages and ships orders accurately and cost effectively for customers Organizes stock and maintains locations on computer. Drives company owned truck and delivers orders to customer Provide excellent customer service when engaging with Ryan Herco Flow Solutions’ customers Load and unloads truck deliveries. Requirements: One to three years warehousing, business, or physical distribution experience Driving/Delivery experience Valid driver’s license with clean driving record Knowledge of PVC fittings or plumbing industry is a plus Excellent customer service skills. Interacts effectively and works productively with a wide range of people Solid interpersonal skills, able to maintain cooperative working relationship with all levels of personnel Reliable and effective communicator Strong teamwork and professional demeanor Equal Opportunity Employer, including disability and protected veteran status. If you are an individual with a disability and require an accommodation to complete the application process, please contact recruiting@sunsrce.com to request reasonable accommodation. Only requests for accommodation in the application process will be returned from this email address. This employer uses E-Verify. Please click here for additional information. (For Illinois E-Verify information click here, aquí). Sun-Source | Privacy Policy #rhfsassc We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.