Trabajos production technician en Deer Park, New YorkCrear alertas

Job DescriptionDescription: Position Summary: A Packaging Set Up Technician is primarily responsible for the set up of various packaging equipment including but not limited to tablet fillers, bottle unscramblers and cleaners, cappers, cottoners, desiccant feeders, check weighers, metal detectors, labelers, cartoners, ink jet printers, etc. • Multiple Shifts Available – Day, Night, Weekend; Full-Time & Part-Time Opportunities Responsibilities: Responsibilities include, but are not limited to: • Ensure proper set-up of the packaging line before and during a job run., • Ensure the line is running at its target rate during a job run., • Troubleshooting of packaging equipment. Report any equipment issues to management., • Complete set-up sheets., • Complete work order and part order requests., • Comply with company policies, SOPs and cGMPs., • Follow all procedures set forth in the set-up procedures., • Operate all equipment in a safe and efficient manner., • Assists fellow technicians and the Line Leaders., • Other responsibilities as assigned by senior management.Requirements: Education and Experience: • High School or GED diploma preferred., • Prior mechanical or machine operator experience required., • Experience in set-up and troubleshooting pharmaceutical packaging equipment required. Skills, Knowledge, and Abilities: • Ability to follow instructions and work independently to meet deadlines., • Ability to understand the basic principles of packaging., • Must be able to multi-task and follow-up when responses are needed., • Ability to communicate effectively and be able to respond to verbal and written instructions., • The ability to identify, locate, and transport parts which requires reading, counting, and performing simple math calculations., • Must be able to utilize basic hand tools and identify correct fastener sizing., • Physical effort may be required which includes prolonged standing, lifting, climbing, bending, moving or carrying heavy materials. Physical Demands and Work Environment • Work environment in production operations facilities include proximity to heavy machinery and pharmaceutical powders, with exposure to loud noises., • Constantly required to use hands and fingers to feel, handle or operate controls and tools and reach with hands and arms., • The operation of certain machinery requires eye, hand, and foot coordination., • While performing the duties of this job, the employee is regularly required to move, stoop, kneel, crouch, climb, stand, bend, sit, talk, hear, or walk for prolonged periods. The employee may lift, move and or carry up to 50 lbs., • Vision abilities required include close vision, distance vision, peripheral vision, color vision and the ability to adjust focus., • Hours/Travel maybe subject to changed based on management/company discretion. Potential to move between production operations sites/areas to complete job functions requiring the use of a personal vehicle. Personal Protective Equipment Required for Position: • PPE / GMP gowning Supervisory Responsibilities: • None Pay Range*: • Setup Technician I: $24.00 - 25.50 (1+ year experience), • Setup Technician II: $26.00 - 27.50 (3+ years' experience), • Setup Technician III: $28.00 - 29.50 (5+ years' experience) *Ranges indicated account for all shifts. Please indicate your shift preference when applying.

Description: Northeast Aero Compressor and PG Aerotech are seeking an experienced Facilities Technician II to help maintain the safe, compliant, and efficient operation of our 55,000 square foot FAA Part 145 certificated repair station and MRO facility in Hauppauge, NY. This is a mid-level, hands-on role for a technician who has moved beyond entry-level building maintenance and is ready to take on greater ownership of preventive maintenance programs, more complex mechanical and electrical troubleshooting, and vendor coordination — while continuing to perform daily hands-on repair and upkeep work. The Facilities Technician II reports to the Production Manager and works closely with them to keep all building systems, ground support equipment, and industrial machinery running reliably. Requirements: • Perform routine and corrective maintenance on HVAC, electrical, plumbing, lighting, and overhead door systems, escalating only the most complex issues to the Facilities Supervisor, • Execute scheduled Preventive Maintenance (PM) tasks and help maintain accurate maintenance logs, service records, and equipment histories in compliance with repair station requirements, • Diagnose and troubleshoot mechanical, electrical, and pneumatic/hydraulic issues on industrial equipment and aviation ground support equipment, • Assist in coordinating third-party vendors and contractors for specialized inspections, certifications, and repairs, • Perform general building maintenance including carpentry, painting, minor structural repairs, and groundskeeping/snow removal as needed, • Conduct routine facility and safety inspections, identify hazards or worn components, and proactively address or report them, • Support the cleanliness and organization of the facility, including production floor, offices, break rooms, restrooms, and grounds, • Help ensure fire and life-safety systems are functioning correctly and are tested/documented on schedule, • Operate company vehicles and material handling equipment (e.g., forklift) to move tools, parts, and supplies between areas or job sites, • Maintain compliance with FAA Part 145 repair station requirements, OSHA regulations, EPA standards, and applicable building codes, • Respond to maintenance requests from building occupants and prioritize/resolve issues promptly Experience and Skills • 2–5 years of experience in building/facilities maintenance, industrial maintenance, or a related mechanical/electrical trade; aviation, manufacturing, or regulated-facility experience preferred, • Working knowledge of HVAC, electrical, and plumbing systems, with demonstrated ability to independently troubleshoot and repair common issues, • Some exposure to industrial equipment such as compressed air systems, generators, or pneumatic/hydraulic equipment preferred, • Comfortable using hand and power tools safely and effectively, with strong mechanical aptitude and problem-solving skills, • Ability to work independently on assigned tasks while collaborating with the Facilities Supervisor on larger projects, • Strong communication and customer service skills when responding to occupant requests, • Ability to pass a pre-employment and random drug and alcohol screening as well as a background check Physical Requirements • Ability to lift at least 50 pounds, • Comfortable working at heights on ladders and lifts, and in confined spaces, outdoor environments, and varying temperatures, • Manual dexterity and ability to constantly manipulate small to medium components, • Ability to stand, walk, bend, and climb stairs for extended periods, • Frequent use of hand tools, power tools, and cleaning/lubricating/painting chemicals Education / Licenses / Certifications • High school diploma or GED required; trade school training or an associate degree in a mechanical, electrical, or facilities-related discipline preferred, • Valid state driver's license with a clean driving record required, • Forklift certification preferred, or ability to obtain within 30 days of hire, • OSHA 10-Hour (or higher) General Industry certification preferred, or willingness to obtain Compensation and Benefits • Full-time, hourly position: $28–$34 per hour, commensurate with experience, skills, and certifications, • This range reflects a mid-level role positioned between our entry-level Facilities Technician/Driver and our Facilities Supervisor, based on current Long Island / Hauppauge, NY market data for facilities and building maintenance technicians, • Medical, dental, vision, and life insurance options, • 401(k) with 100% match on the first 4%, • Paid holidays, vacation, and sick/personal leave accrued from date of hire, • Training/education budget, gym reimbursement, complimentary drinks, company events, and philanthropy opportunities Compensation details: 28-34 Hourly Wage PIdeb52e964200-37820-41065392

Job Description Lead Septic Repair & Excavation Technician Affordable Cesspool Sewer & Drain | Islandia, NY We Rush So You Can Flush® Affordable Cesspool Sewer & Drain has proudly served Long Island since 1992 and is one of the region's leading septic, sewer, drain, excavation, and wastewater service companies. We are seeking an experienced Lead Septic Repair & Excavation Technician to join our growing service division. This is a working field position—not just an equipment operator. You will operate excavators and skid steers while also working alongside your crew performing physical labor, completing repairs, and ensuring every project is completed safely, efficiently, and professionally. Every day brings a different challenge—from locating buried septic tanks to replacing sewer lines, installing risers, and restoring customers' properties. Responsibilities • Operate mini excavators, compact excavators, and skid steers, • Drive company trucks and trailers to residential and commercial job sites, • Locate and excavate buried cesspools, septic tanks, sewer lines, and utility connections, • Install septic tank risers, collars, access covers, and distribution box risers, • Replace main waste lines, sewer laterals, and underground piping, • Perform septic system repairs and service excavations, • Dig by hand around utilities, septic tanks, and structures when required, • Lay and connect sewer pipe and fittings, • Load and unload equipment, tools, and materials, • Organize job materials, truck inventory, and yard stock, • Work alongside and help lead a 2-3 person crew, • Restore job sites by backfilling, grading, cleaning, and leaving properties in excellent condition, • Communicate professionally with homeowners and commercial customers, • Complete job notes, photos, and documentation using company iPads and ServiceTitan, • Utilize GPS and mobile technology to navigate between job sites, • Follow Safe Dig 811 requirements, OSHA regulations, and company safety standards, • Maintain clean trucks, trailers, tools, and equipment Qualifications • Valid CDL Class A or Class B License required, • Clean driving record, • Experience operating mini excavators, skid steers, and compact construction equipment, • Experience in septic, sewer, excavation, underground utilities, plumbing, or sitework required, • Willingness to perform physical labor—not just operate equipment, • Ability to safely dig around underground utilities and existing infrastructure, • Strong customer service and communication skills, • Ability to use GPS, mobile applications, and CRM software on an iPad, • ServiceTitan experience is a plus, • Strong work ethic, leadership skills, and attention to detail, • Ability to work well on a 2-3 person crew in a fast-paced environment Compensation & Career Path Lead Septic Repair & Excavation Technician • $30-$50+ per hour based on experience, • Performance bonuses - Career Path to $100,000+, • Overtime opportunities, • Guaranteed year-round work Performance incentives based on: • Productivity and efficiency, • Quality of workmanship, • Safety performance, • Customer satisfaction, • Documentation accuracy, • Teamwork and leadership What We Offer • Competitive hourly pay, • Performance-based bonuses, • Guaranteed year-round work, • Full-time stable employment, • Modern trucks, trailers, excavators, and equipment, • Paid training and continuing education, • Career advancement opportunities, • Family-owned company serving Long Island since 1992 Schedule • Typical start times between 7:00 AM and 8:00 AM, • Some days may begin as earlier, • Monday through Friday, • Overtime opportunities available, • Work throughout Nassau and Suffolk County Career Path Lead Septic Repair & Excavation Technician → Lead Septic Installer → Install Manager → Production Manager → Operations Manager Why Join Us? If you're looking for more than just another equipment operator position, this is the opportunity for you. We're looking for a hands-on professional who takes pride in operating equipment, working alongside the crew, solving underground problems, and delivering high-quality workmanship. Every project is different, and every day offers the opportunity to build your skills while growing with one of Long Island's premier septic and excavation companies.

Job Description Automotive Technician / Auto Mechanic – ASE Technician – All Levels Huntington Volvo – VIP Automotive Group Huntington, NY $18 – $45+ Per Hour | 45+ Hours Available | Full-Time | 5-Day Work Week ???? NOW HIRING: AUTOMOTIVE TECHNICIANS – ALL EXPERIENCE LEVELS Huntington Volvo is hiring Automotive Technicians, Auto Mechanics, ASE Technicians, and Automotive Mechanics at all experience levels. Whether you're an Entry-Level Technician, C-Level Technician, B-Level Technician, A-Level Technician, Master Technician, or experienced Auto Mechanic, we want to hear from you! $18 – $45+ per hour depending on experience with 45+ hours available, production bonus opportunities, union benefits, paid training, and opportunities for career advancement. Join Huntington Volvo, part of the VIP Automotive Group, and build your career with a respected automotive dealership group. Our modern, climate-controlled service facility provides technicians with the tools, training, and management support needed to succeed. ???? WHY JOIN OUR SERVICE TEAM? $18 – $45+ per hour based on experience and skill level 45+ hours available every week Full-Time, 5-Day Work Week Weekly production bonus opportunities Union benefits package including health, dental, pension & vacation Paid ASE certification Paid Volvo manufacturer training Modern, climate-controlled service facility Tool relocation assistance available Employee discounts on vehicles, parts & service Consistent work and strong earning potential Career advancement opportunities within VIP Automotive Group Supportive service management team Opportunity to work with a premium automotive brand ???? AUTOMOTIVE TECHNICIAN RESPONSIBILITIES Depending on experience and skill level, Automotive Technicians will be responsible for: Diagnose and repair automotive mechanical and electrical systems Perform routine and preventative vehicle maintenance Perform brake repairs, tire services, oil changes, inspections, and general repairs Diagnose drivability and performance concerns Use automotive diagnostic equipment and scan tools Perform electrical and computer-related diagnostics Complete manufacturer-recommended repairs and maintenance Perform software updates and key programming Inspect vehicles and identify necessary repairs Accurately document repairs and complete repair orders Communicate with Service Advisors regarding vehicle concerns and repairs Work with the Parts Department to obtain necessary parts Follow manufacturer and dealership repair procedures Maintain a clean, safe, and organized service bay Maintain professional standards for quality, productivity, and customer satisfaction Assist with training and mentoring less-experienced technicians when appropriate ????️ TECHNICIANS OF ALL LEVELS ARE ENCOURAGED TO APPLY We're looking for technicians who want to work, learn, earn, and build a long-term automotive career. Entry-Level / Apprentice Technicians: Great opportunity to develop your automotive repair skills through hands-on experience and paid manufacturer training. C-Level / Mid-Level Technicians: Take the next step with consistent work, strong earning potential, training, and advancement opportunities. B-Level / Advanced Technicians: Utilize your diagnostic and repair expertise in a professional dealership service environment. Master Technicians/A - Level: Bring your advanced diagnostic and repair experience and help support a high-performing service team. ✅ QUALIFICATIONS Previous experience as an Automotive Technician, Auto Mechanic, Automotive Mechanic, or Service Technician Dealership experience preferred but not required ASE certifications are a plus ASE certification assistance available Volvo or European automotive experience preferred Strong mechanical and diagnostic skills Ability to diagnose and repair automotive systems Ability to work efficiently in a fast-paced service environment Strong attention to detail and quality workmanship Professional attitude and strong work ethic Valid driver's license required We welcome technicians from independent repair shops, automotive service centers, dealerships, and other automotive backgrounds. ???? WHY HUNTINGTON VOLVO? At Huntington Volvo, you're not just filling a technician position — you're joining a team that supports long-term automotive careers. As part of VIP Automotive Group, you'll have access to ongoing training, career development, employee benefits, and opportunities to advance within a growing dealership organization. Our goal is to provide our technicians with the work, training, equipment, and support needed to succeed. ???? SCHEDULE Full-Time | 5-Day Work Week 45+ Hours Available ???? LOCATION Huntington Volvo – Huntington, NY ???? READY TO ADVANCE YOUR AUTOMOTIVE CAREER? If you're an Automotive Technician, Auto Mechanic, ASE Technician, Volvo Technician, Automotive Mechanic, Service Technician, Master Technician, A-Level Technician, B-Level Technician, or Entry-Level Technician, apply today! Experienced technicians and motivated entry-level candidates are encouraged to apply. Join Huntington Volvo and VIP Automotive Group — apply today and take the next step in your automotive career!

Job Description We're looking for Autobody Preppers with a minimum of 5 years of professional automotive bodywork experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Heavy Body Technician, you'll be expected to train other autobody technicians and perform extensive bodywork on multiple panels, including: • Heavy plastic welding/stapling, • Heavy metal pulling, straightening, shrinking, and stud welding, • Roof and rocker panel repair Large area, heavy bodywork (including Bondo repair) At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: Pay Range: $33 - $41 Hourly We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 690-7853, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). Not a match for this role? We have a variety of prep roles available, depending on your experience - look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Prepper (min 1 year professional experience): perform light bodywork, including prepping, sanding, and buffing vehicles, removing and installing bumpers, single panel repair (including Bondo repair), and minor plastic welding, • Mid-Level Prepper (min 3-5 years professional experience): perform bodywork on multiple panels, including heavy plastic welding, minor metal pulling, roof and rocker panel repair, stud welding, and large area heavy bodywork (including Bondo repair), • Experienced Prepper (min 5 years professional experience): train other autobody technicians and perform extensive bodywork on multiple panels, including plastic welding, metal pulling, roof and rocker panel repair, and stud welding We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job DescriptionDescription: Are you passionate about science and precision? Join our Quality Control team as a Laboratory Technician and gain hands-on experience performing chemical and microbial testing for raw materials and finished products in a regulated, GMP-compliant environment. This is an opportunity to develop your technical expertise, learn from experienced professionals, and contribute directly to ensuring the quality and safety of products that reach consumers. Position Summary: The Laboratory Technician is responsible for performing basic chemical and/or microbial analysis for one of the assigned QC laboratories (Raw Material, Finished Product, Microbiology, Technical Support) which is responsible for the analysis and disposition of commercial materials (raw materials, finished product release, stability, validation, investigation), and environmental samples, as assigned, documenting results, and maintaining laboratory supplies, chemicals, and logbooks in accordance with SOPs. • Job Type: Full-Time, • Location: Hauppauge, NY, • Works Hours: Monday – Friday, 7:30AM – 3:30PM EST, • Pay Range: $23 per hour, • Start Date: ASAP Responsibilities: include, but are not limited to: • Follow all laboratory SOPs, including but not limited to laboratory safety, chemical handling and storage, gowning, equipment use, cGMP, GDP, data integrity, DEA requirements, etc., • Log in and track all samples received in the lab for testing and release., • Perform laboratory physical chemistry testing (ie. weighing, particle size analysis, LOD, Halogen Moisture Analysis, Moisture Content/KF, Water Activity, etc.), identification testing (ie. FTIR, UV-VIS, TLC) and wet chemistry testing (ie. ICP-OES/MS, DT, titrations, pH, dissolution media/stock sample preparation, laboratory solution preparation and standardization, etc.), as assigned, in accordance with the prescribed approved analytical test method., • Perform sampling, plating, and testing of product assigned for microbiology analysis along with media preparation, sterilization and storage, etc., as assigned in accordance with the prescribed approved test method., • Maintain proper labeling of chemical reagents., • Maintain a clean and organized laboratory working environment., • Assist in laboratory investigations, as assigned., • Dispose of used/expired/excess chemicals, solutions, solvents, etc. in dedicated waste receptacles., • Report well-written, accurate and timely results., • Review data, calculations, notebooks, and reports., • Perform routine Metrology functions, including instrument cleaning/preventive maintenance/ calibration/verification activities., • Monitor and assist with maintaining proper inventory levels of all laboratory supplies., • Assist with sample receiving, chemical inventory, document filing, housekeeping, etc., • Responsible for compliance with all rules and regulations pertaining to safety policies with the proper attitude toward safety and health, helping to ensure that all department operations are performed with the utmost regard for the safety and health for all personnel., • Other responsibilities as assigned by Management.Requirements: Education and Experience: • Associate’s degree or relevant work experience required; Bachelor’s degree preferred. Skills, Knowledge, and Abilities: • Knowledge of laboratory chemistry or microbiology, and cGMPs., • Proficient in Microsoft Word, Excel, graphs/charts and databases., • Able to multitask and meet tight deadlines., • Excellent organizational skills with attention to detail. Physical Demands: • Required to sit and stand for long periods of time., • Frequently reaching with arms/hands up to 2 feet., • Good hand eye coordination., • Occasionally required to walk and kneel., • Must be able to lift and/or move up to 50 pounds., • Must be able to use close vision, distance vision, peripheral vision, color vision and the ability to adjust focus., • Required to reach with arms and use hands and fingers to handle or feel objects, tools and computer controls., • Required to stoop, kneel, crouch, stand, bend, sit, talk, hear, climb stairs. Work Environment: • Work environment in laboratory and production operations facilities include close proximity to heavy machinery and pharmaceutical powders., • Potential to move between production operations sites/areas to complete job functions; regular, ongoing travel throughout geographic areas on a continual basis as normal scope of role requiring use of personal vehicle., • Employee work hours/schedule and/or shift are subject to change based on business needs and Management discretion., • Required to be present in the laboratory to perform daily testing and collaborate with department director, manager, and peers. Supervisory Responsibilities: • None Personal Protective Equipment or Attire Required for Position: • Gowning as required by GMPs and/or SOPs

Job DescriptionDescription: JOB TITLE: RF Technician Job Summary: As a RF Technician, you will perform advanced RF/Microwave system testing, trouble shooting, and electro-mechanical diagnostics for sub-assemblies and high-level system assemblies. This ideal candidate possesses exceptional troubleshooting skills in RF technology and Analog/Digital circuits, with the ability to work independently or collaboratively in a dynamic environment. Key responsibilities: · Conduct testing and troubleshooting of RF/Microwave sub-assemblies and upper-level assemblies according to system specifications. · Develop test procedures and create documentation, including Data Sheets and Acceptance Test Procedures (ATP) · Perform evaluation, acceptance, and sell-off testing in compliance with in-house QA standards and government audits. · Assist in reverse engineering of RF based products and generate schematics from existing circuits. · Utilize commercial test equipment, including Spectrum Analyzers, Vector Network Analyzers, Power Meters, and Oscilloscopes, with proficiency. · Calibrate, maintain, and repair electronic test equipment and oversee the upkeep of the Environmental Testing Facility assets. · Maintain and manage the computerized calibration database for IM & TE (Inspection, Measuring and Test Equipment) assets. · Recall IM & TE due for calibration to ensure operational accuracy and compliance. · Work independently and as part of a team with minimal supervision to meet project deadlines and deliver high-quality results. · Collaborate with engineering team to resolve technical challenges and optimize performance. Required Qualifications: · Associate’s degree in Electrical Technology/Electronics or equivalent · Extensive experience (7+ years) in a fast-paced repair or production environment may be considered in lieu of formal education. · Proficient in the use of advanced RF test equipment, including Spectrum Analyzers, Vector Network Analyzers Power Meters and Oscilloscopes. · Experience in developing and documenting test procedures. · Strong analytical, organizational and communication skills. Preferred Qualifications: · Familiarity with ESD handling protocols and production safety standards. · Experience with Power Amplifiers and Low Noise Amplifiers. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description Position: Quality Control Technician Company: NAPCO Security Technologies Location: Amityville, NY Company: NAPCO Security Technologies, a world-wide leader in the manufacturing of electronic security systems for over 50 years, headquartered in Amityville, Long Island NY, seeks a Quality Control Technician to assure quality product by conducting in-process inspections and evaluating finished product. Responsibilities: · Determines quality and reliability standards by studying drawings and formulas; verifying specifications with engineering staff. · Identifies raw material condition by collecting materials samples; conducting inspections and physical tests of materials. · Identifies in-process product condition by collecting samples during production process; conducting in-process inspections and physical tests. · Determines disposition of finished product by collecting, classifying, analyzing, and interpreting production and quality data; judging product acceptability in comparison to specifications. · Determines acceptability of rework by conducting inspections and physical tests of reworked product. · Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data; updating quality assurance database. · Maintains product quality documentation system by writing or rewriting quality assurance procedures. · Maintains quality assurance operations by following quality assurance policies and procedures; reporting needed changes. · Contributes to team effort by accomplishing related results as needed. Skills/Qualifications: Analyzing Information , Reporting Research Results, Technical Understanding, Promoting Process Improvement, Documentation Skills, Managing Processes, Manufacturing Methods and Procedures, Operations Research, CAD, Quality Engineering, Quality Management Compensation and Benefits: We offer steady, stable, full-time work, and an attractive employment package, including a competitive salary, 401(k), paid vacation, personal time off, paid holidays, long term disability insurance, tuition reimbursement, medical insurance, dental insurance, life insurance, promotional opportunities and career growth.

Job Description Schivo Medical, a contract manufacturer on Long Island, manufactures a diverse range of essential medical technology solutions and is seeking to hire an experienced CNC Repair Mechanic. While working for Schivo Medical, you will be part of a company that is committed to keeping a clean working environment and that helps their employees build a fulfilling and rewarding career. Come build your skills and work with the top professionals in CNC Production today. CNC Repair Mechanic job overview: The Service Technician is responsible for repairing and maintaining complex CNC machinery and mechanical / electrical equipment for manufacturing medical and firearm components. He ensures maximum equipment efficiency and effectiveness. CNC Repair Mechanic Essential Duties and responsibilities: • Must be able to change ball screws, guide rails, and align spindles using indicators., • Trouble shoot issues & perform all repair, modifications, adjustments, and preventive/predictive and routine maintenance on production equipment- CNC machines (i.e., Tornos Deco2000), • Troubleshoot issues and repair failures of production equipment. Electrical Repairs and / or replacement of control devices, including circuit boards and memory devices Assist Operation with analyzing deviations and definition of machine related corrective actions., • Initiate repairs and modifications as a function of Continuous Improvement and process stability (e.g., 5S and Preventive Maintenance)., • Control spare parts inventory stock Support all aspects of building maintenance/routine shop preventive maintenance as needed. Monitor and maintain environmental, health and safety equipment and systems for both production and non-production equipment as directed. CNC Repair Mechanic Education and skills Requirements: High school diploma or GED required. Associate’s degree in industrial maintenance or similar 2-year technical degree in a related field preferred not required. 5+ years field knowledge as a multi-craft technician in the following fields: CNC Repair, Mechanics, Industrial Electrical systems, Electronics, Hydraulics, Pneumatics, and PLC. Strong repair background. Language Skills: Ability to read and interpret documents and drawings (e.g., blueprints, manuals, wiring diagrams etc.) Must be able to work in a team environment. Physical requirements: • Ability to stand for several hours., • Ability to lift 50lbs. Benefits: • 401(k), • Dental insurance, • Vision Insurance, • Health insurance, • Generous paid time off, • EAP program, • Employee referral program, • Free snacks on Fridays, • Free coffee and tea daily Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job DescriptionJob Title: Maintenance MechanicJob Description The Maintenance Mechanic supports production operations by diagnosing, repairing, and maintaining industrial and food manufacturing equipment. This role focuses on mechanical and electrical troubleshooting, preventive maintenance, and ensuring that packaging and processing machinery operates safely, efficiently, and with minimal downtime. Responsibilities • Perform mechanical and electrical troubleshooting on production and packaging machinery to quickly identify and resolve equipment issues., • Diagnose, repair, and maintain a variety of industrial equipment including packaging machines, cappers, fillers, overhead doors, sprockets, pulleys, gears, and conveyors., • Conduct preventive maintenance on production machinery to reduce unplanned downtime and extend equipment life., • Support production operations by ensuring machines are set up, calibrated, and running properly throughout each shift., • Inspect equipment regularly to identify potential problems and perform corrective actions before failures occur., • Use PLC troubleshooting techniques to assist in diagnosing control and automation issues on production lines., • Work safely around electrical systems and mechanical components, following all facility safety procedures and guidelines., • Collaborate with production and maintenance team members to prioritize repair work and communicate equipment status., • Document maintenance activities, repairs, and parts used to maintain accurate equipment service records., • Respond to equipment breakdowns promptly and provide clear updates on repair progress and estimated completion times.Essential Skills, • Hands-on experience in food manufacturing or a similar industrial maintenance environment., • Strong mechanical troubleshooting and problem-solving skills in a high-volume production setting., • Ability to diagnose and repair a wide range of production machinery, including packaging machines, cappers, fillers, conveyors, and related components., • Industrial maintenance experience with machine maintenance and maintenance technician duties., • Proficiency in preventive maintenance practices for both mechanical and electrical systems., • Experience with electrical maintenance, including working safely with powered equipment and control systems., • PLC troubleshooting skills to support automated production equipment., • Knowledge of pneumatics and the ability to maintain pneumatic components and systems., • Ability to support production operations by keeping equipment running reliably and efficiently., • Effective communication skills to work with production and maintenance teams.Additional Skills & Qualifications, • Experience specifically in food manufacturing environments is highly beneficial., • Bilingual communication skills are preferred to support a diverse workforce., • Familiarity with overhead doors, sprockets, pulleys, gears, and conveyors in an industrial setting., • Comfort working with both mechanical and electrical aspects of production equipment., • Strong attention to detail and commitment to safety and equipment reliability.Why Work Here? You will join a production environment that values skilled trades, teamwork, and reliability, offering the opportunity to work with a wide range of industrial equipment and grow your technical expertise. The facility provides stable shift schedules and the chance to collaborate closely with operations and maintenance teams, contributing directly to efficient and continuous production. The culture emphasizes safety, continuous improvement, and respect for each team member’s contribution. Work Environment This role is based in a food manufacturing or similar industrial production facility, working directly on the plant floor with production and packaging equipment. Shift options typically include a 1st shift from 5:00 AM to 2:30 PM and a 2nd shift from 2:30 PM to 12:00 AM, supporting continuous operations. The environment involves working around machinery such as packaging lines, cappers, fillers, conveyors, overhead doors, and mechanical drive components like sprockets, pulleys, and gears. You will regularly use tools and diagnostic equipment for mechanical, electrical, PLC, and pneumatic systems. Work is performed in a fast-paced setting where adherence to safety procedures, appropriate industrial attire, and awareness of moving equipment and noise are essential. Job Type & Location This is a Contract to Hire position based out of Bay Shore, NY. Pay and Benefits The pay range for this position is $28.00 - $30.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Bay Shore,NY. Application Deadline This position is anticipated to close on Sep 9, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. \nCompany Description We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: JOB TITLE: Engineering/Electronic Technician Company Overview: U. S. Dynamics Corporation is a leading firm in the Manufacturing Industry, known for our commitment to innovation, quality and sustainability. Our Engineering team is at the heart of designing solutions that meet the future needs of our customers worldwide. We are currently seeking a skilled Engineering Drafter to join our dynamic team and continue our mission of excellence. Job Summary: The candidate will build, troubleshoot, repair, and maintain custom built as well as commercial production test equipment. This typically includes; specialized electronic production test fixtures, wiring harnesses and other cables, and other miscellaneous electronic or electrical devices. This will require the successful candidate to be able to solder, use basic electronics related hand tools, and have great troubleshooting skills. Key responsibilities: · 5+ years dealing with five or more of the following: · Wiring/soldering of prototype electronic equipment, both discretely wired and PC board based. · Reading, interpreting, modifying, and creating electrical schematic and wiring diagrams · Component level test and troubleshooting (IC amplifier chips, transistors, passives, and magnetics) · Electronics systems and equipment repair (amplifiers, power supplies, signal conditioning, filters) · Electromechanical, mechanical, or electromagnetic systems hands-on experience · Hands-on test and troubleshooting of custom, specific purpose-built electronic test equipment · Use of schematic capture/Spice tools for basic circuit design/troubleshooting · Handle vacuum pumps and plumbing Required Qualifications: · Knowledge of AC, as DC circuitry and components · Knowledge of Circuit phase shifting · Knowledge of AC impedance, AC power calculations · Can interpret and digest technical specifications and procedures · Electrical schematic and wiring diagram reading · Soldering · Use of basic electronics/mechanical hand tools; wire cutters, strippers, de-soldering tools, solder-wick, power drill, Taps, Dyes · Use of basic electrical test equipment operation skills, e.g.; DVM, megger, oscilloscope, signal generator, timers · Knowledge of servers and stepper motos and control systems · Basic mechanical instrument skills, e.g.; micrometers, calipers, dial indicators, precision levels · Computer literacy (Word, Excel, etc.) Preferred Qualifications: · Advanced test equipment operation skills, e.g.; spectrum analyzer, distortion meter, EMI analysis equipment · Microcontroller/microprocessor based digital and/or mixed signal circuit and system familiarity · Magnetic circuit familiarity · Knowledge of environmental testing (temperature, shock, vibration) · Ability to program environmental test chambers and/or vibration tables · An outstanding, can-do attitude willing to go above and beyond the normal · Familiarity with Lathes and Vertical Mills · Familiarity with DAQ’s and Labview/Dasy Lab programs · Knowledge of industrial wiring polyphase power systems · Experience with pressurized gasses · Knowledge of 100th edition handbook of DOE Engineering Fundamentals Course Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description Role overview We’re hiring a Senior Machinist: CNC / GD&T / G&M Code / Setup with hands-on experience setting up and running multi-axis CNC equipment. You’ll own setups end-to-end, help prove out new programs, and support both R&D builds and short production runs. What you’ll do • Read and interpret engineering drawings, setup sheets, and related documentation; apply GD&T requirements., • Set up and operate multi-axis CNC milling and turning equipment (including mill-turn / live tooling where applicable)., • Configure workholding and fixtures (vise, soft jaws, tombstones, custom fixtures) per setup documentation and best practices., • Run, validate, and help prove out new CNC programs; support first-article / first-piece verification., • Diagnose machining issues and make minor program/parameter adjustments (feeds/speeds, offsets) during runs., • Perform in-process and final inspection using standard precision metrology tools; document results as required., • Maintain machines and work area (basic preventive care, cleanliness, chip/coolant management)., • Adapt between fast-turn prototype/R&D work and short-run production while maintaining quality and repeatability. About the team The CNC Machining team works directly with the engineering and manufacturing teams to produce precision components for propulsion and vehicle systems. About iRocket Founded in 2018, Innovative Rocket Technologies Inc. is revolutionizing the space industry as the first fully autonomous and 100% reusable rocket manufacturer. iRocket is building the world’s first reusable rocket engines with a setup focused on reusability from the beginning, including high performance and long life. We will Recondition, Reload, and Relaunch™ our rockets synonymous with how we use airplanes today for multiple daily flights in under 24 hrs. achieving reusability 2.0. Utilizing cutting-edge 3D printing and additive manufacturing technology, we’re dedicated to providing reliable and rapid access to space at a low cost. Our innovative design addresses the inefficiencies in the industry, while our proprietary reusable engine technology positions us as the leading small launch service provider. Join us on our journey to space. Requirements Required qualifications • 3+ years experience as a CNC machinist/operator and setup technician in a precision environment., • Must be proficient in G-Code and M-Code programming with the ability to troubleshoot, edit, prove out processes, perform first piece runs, and recommend changes to programs on multi-axis machine tools proficiently., • Experience with multi-axis machining (3+1 / 3+2); familiarity with complex toolpaths and 3D surfaces., • Experience with live-tooling lathes, mill-turns, or multi-task machines., • Working knowledge of machining a range of materials (e.g., aluminum alloys, stainless, alloy steels, and other engineering materials)., • Solid understanding of tooling, tool life, cutters, and fixturing methods., • Intermediate ability to interpret and apply GD&T., • Able to take ownership of the setup and run process from start to finish; comfortable juggling multiple competing priorities., • U.S. Person status required due to access to export-controlled technical data. Preferred qualifications • Experience with simultaneous 5-axis setup and operation., • Experience working with Okuma CNC machines and controllers., • Comfortable referencing a CAD model to verify dimensions/features (model-based measurement)., • Experience with CMM inspection (e.g., PC-DMIS or similar)., • Waterjet experience. Additive manufacturing exposure (e.g., FDM/SLA) and/or post-processing familiarity. Benefits What we offer • Competitive hourly pay at $33/hr-$43/hr (commensurate with experience), • Benefits: [Health/Dental/Vision/401(k)/PTO], • High-impact work on real aerospace hardware, • Fast-paced environment with direct collaboration across engineering, test, and manufacturing

Job Description We are seeking a detail-oriented hands-on Quality Control Laboratory Technician to join our Quality Control team for the second shift starting at 2:00 PM. This role is critical in ensuring the safety, quality, and compliance of our products throughout the manufacturing process. The QC Lab Technician serves as the front-line quality representative on the production floor, conducting product testing, verifying production requirements, and maintaining accurate records to ensure all products meet company and customer specifications. This position reports directly to the Quality Control Manager and works closely with Production personnel to support food safety and quality objectives. Quality and Testing Analysis • Collect in-process and finished product samples from production lines., • Perform laboratory analyses according to Standard Operating Procedures (SOPs)., • Record and document test results accurately in logs and databases., • Verify formulas and production specifications during manufacturing., • Verify product packaging, labels, and coding for accuracy., • Conduct package weight checks and ensure compliance with specifications. Production Quality Oversight • Monitor production batching processes to ensure ingredients are added in the proper sequence and processed according to established procedures., • Place products on hold when quality results fall outside acceptable specifications., • Investigate quality concerns, identify potential causes, and recommend corrective actions., • Assist with the disposition of held products through retesting and production support. Food Safety & Compliance • Collect environmental, allergen, contaminant, and sanitation samples as required., • Conduct pre-operational, post-cleaning, and start-up inspections of production equipment., • Support food safety, quality, and regulatory compliance initiatives. Documentation & Continuous Improvement • Maintain accurate and organized laboratory records., • Keep the laboratory clean, safe, and compliant with company standards., • Identify opportunities to improve laboratory efficiency and effectiveness while maintaining product quality. Qualifications Education Associate degree in a Science-related field, coursework in Microbiology, or equivalent combination of education and experience. Experience Food manufacturing industry preferred. Quality Control, Quality Assurance, laboratory testing, pharmaceutical manufacturing, or related industries is a plus. Skills & Abilities Strong attention to detail, organizational skills, excellent communication and teamwork abilities. Ability to read, interpret, and follow SOPs, safety regulations, and operational instructions. Proficiency in data entry, documentation, and recordkeeping, strong problem-solving and analytical skills. Physical & Work Requirements Ability to work on the production floor and in a laboratory environment and work extended hours as needed. Safety-focused mindset while working around production equipment. Flexible and dependable with the ability to work nights and weekends \nCompany Description We foster a strong safety culture across all operations and provide a collaborative, team-oriented environment where employees can grow their skills and advance their careers. With more than 100 years of experience, we are recognized for delivering high-quality aseptic fruit and dairy products worldwide, built on a foundation of stability, innovation, and excellence. We foster a strong safety culture across all operations and provide a collaborative, team-oriented environment where employees can grow their skills and advance their careers. With more than 100 years of experience, we are recognized for delivering high-quality aseptic fruit and dairy products worldwide, built on a foundation of stability, innovation, and excellence.

Job Description Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. We are seeking a highly skilled Senior Engineering Technician to join our Operations team in a fast-paced RF and Microwave manufacturing environment. This hands-on role is ideal for an experienced technician with a strong background in testing, tuning, troubleshooting, and manufacturing advanced RF products. The successful candidate will support the production of RF, microwave, millimeter-wave, and frequency conversion products, ranging from discrete components through integrated subsystems. Working closely with Design Engineering, Manufacturing Engineering, Quality, and Operations, this individual will play a key role in solving complex technical challenges, supporting new product introduction, improving manufacturing processes, and ensuring the successful delivery of high-performance products. The ideal candidate is technically strong, enjoys solving difficult RF problems, thrives in a collaborative environment, and continuously looks for opportunities to improve product quality, manufacturing performance, and operational efficiency. Essential Functions: Technical Responsibilities • Test, tune, troubleshoot, characterize, and validate RF, microwave, millimeter-wave, and frequency conversion products from discrete components through fully integrated subsystems., • Perform RF and microwave characterization, tuning, troubleshooting, and acceptance testing using advanced RF test instrumentation, including PNA/PNA-X network analyzers, spectrum analyzers, signal generators, oscilloscopes, power meters, noise figure analyzers, RF sources, and automated test systems., • Diagnose complex RF performance issues, analyze test data, and determine root causes using sound engineering principles and measurement techniques., • Perform electrical alignment and optimization of RF assemblies to meet product performance specifications., • Read and interpret engineering drawings, schematics, wiring diagrams, specifications, and manufacturing documentation., • Perform precision assembly and troubleshooting using microscopes and miniature hand tools. Engineering & Product Development • Partner with Design and Manufacturing Engineering to support prototype builds, First Article Inspection, New Product Introduction, and production readiness., • Support engineering investigations by recommending design, test, or manufacturing improvements that enhance product performance, manufacturability, reliability, and quality., • Develop and improve manufacturing fixtures, test methods, and standardized work instructions to increase repeatability and production efficiency. Manufacturing Excellence • Drive Lean Manufacturing and Continuous Improvement initiatives focused on improving first-pass yield, reducing cycle time, increasing throughput, and eliminating waste., • Support root cause investigations and corrective actions for manufacturing and customer-return issues., • Work across multiple manufacturing departments to resolve technical challenges and support production priorities while maintaining the highest standards of quality and safety. Technical Leadership • Mentor and support junior technicians by providing technical guidance on new products, manufacturing processes, RF test equipment, troubleshooting techniques, and best manufacturing practices., • Maintain accurate manufacturing records, test documentation, and production data in accordance with company procedures and quality standards. Qualifications • High School Diploma or equivalent with 8+ years of related experience, or an Associate's Degree in Electronics, Electrical Engineering Technology, or a related technical discipline with 4+ years of relevant experience., • Extensive experience testing, tuning, troubleshooting, and characterizing RF, microwave, millimeter-wave, or frequency conversion products., • Strong understanding of RF and microwave theory, measurements, and applications., • Experience troubleshooting RF hardware from discrete component level through integrated subsystem level., • Proficiency in using advanced RF test equipment, • Ability to analyze RF test results and determine the root cause of electrical performance issues., • Ability to read and interpret engineering drawings, electrical schematics, and manufacturing documentation., • Strong analytical, troubleshooting, and problem-solving skills., • Excellent manual dexterity and experience working under a microscope with miniature RF components., • Strong communication skills with the ability to collaborate effectively across Engineering, Manufacturing, Quality, Planning, and Operations., • Experience supporting New Product Introduction and transitioning products into production., • Experience in aerospace, defense, or other high-reliability manufacturing environments., • Working knowledge of Lean Manufacturing, Continuous Improvement, Kaizen, Root Cause Analysis, or Six Sigma methodologies., • Experience identifying and implementing process improvements that improve quality, manufacturing efficiency, and throughput., • Familiarity with ERP/MRP systems and manufacturing documentation., • Active Secret Clearance or the ability to obtain and maintain one. Please be aware that many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at denise.nocerino@nardamiteq.com. Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance About the Firm: Haider Engineering P.C., established in 1998, commits its full resources to ensure the successful completion of all assigned projects. We are committed to providing quality construction engineering services to our clients. We retain on staff Resident Engineers, Design Engineers, Office Engineers, Team Leaders, Assistant Team Leaders, Estimators, Schedulers and Inspectors to carry out various engineering project assignments. Our excellent reputation is based on the quality of our work, the ability to maintain a work site, and the ability to consistently satisfy our clients. Our staff is well versed in the design and reconstruction of building, roadways, bridges, sewers, water mains and traffic control facilities. Our multidisciplinary capabilities, combined with the depth of our staff experience, enable us to handle a wide range of assignments of various types. Job Description: Haider Engineering P.C., a rapidly expanding REI firm, needs ACI Grade I Field Testing Technician and ACI Concrete Construction Special Inspector for a PANY&NJ project at Midtown Bus Terminal. Reporting Facility: Port Authority Midtown Bus Terminal (or various projects as needed) Duties and Qualifications: (ACI Concrete Construction Special Inspector) • ACI Grade I Certified, • ACI Concrete Construction Special Inspector, • Perform rebar inspection, • Verify daily concrete mix designs, • Perform fresh concrete testing and microwave water-to-cement ratio testing, • Perform post-placement inspections, • Identify non-conformances and provide a non-conformance report on an as needed basis, • Take photos to capture all aspects of production on a daily basis, • OSHA 30 certified, • Current with Secure Workers Access Consortium, • Valid Driver's LicenseWe offer an excellent salary and benefits package with health insurance, a 401(k) plan and a positive and friendly work environment. Please contact for more details. Haider Engineering P.C. is an Equal Opportunity Employer.

Job DescriptionCNC Programmer & Setup Technician (Swiss CNC) Medical Device Manufacturing | Plainview, NY Full-Time | On-Site About the Role: We are seeking an experienced CNC Programmer & Setup Technician to support precision manufacturing operations in a fast-paced medical device manufacturing environment. This role is responsible for programming, setting up, and optimizing Swiss-style CNC machines while developing efficient machining processes for new and existing products. The ideal candidate has extensive experience with Swiss CNC machines, particularly Tornos equipment, and is passionate about continuous improvement, precision machining, and delivering high-quality components that meet tight tolerances. This position works closely with Engineering, Quality, and Production teams to ensure new programs and setups are production-ready and optimized for efficiency. Responsibilities: • Develop, edit, and optimize CNC programs for Swiss-style CNC machines, with a strong emphasis on Tornos equipment., • Perform complete machine setups, including tooling, workholding, offsets, and program verification., • Develop machining processes for new product introductions while improving existing manufacturing methods., • Select appropriate cutting tools, fixtures, and workholding solutions to maximize productivity and quality., • Optimize cycle times, tooling strategies, and machining parameters to improve efficiency and reduce costs., • Troubleshoot machining, tooling, and program-related issues to minimize downtime., • Conduct first article inspections and validate machining processes prior to production release., • Train machine operators on new setups, tooling requirements, and production processes., • Update existing CNC programs using modern machining techniques and continuous improvement principles., • Maintain compliance with quality standards, engineering drawings, and manufacturing specifications., • Collaborate with Engineering, Quality, and Manufacturing teams to support production goals and new product development., • Support Lean Manufacturing and continuous improvement initiatives throughout the machining department.Qualifications:, • High school diploma, GED, or trade school certification in machining or a related field., • Minimum 5 years of experience operating Swiss CNC machines in a precision manufacturing environment., • Minimum 3 years of CNC setup experience., • Minimum 2 years of CNC programming experience, preferably with Swiss-style CNC machines., • Strong experience with Tornos Swiss screw machines is required., • Proficiency with CAD/CAM software, including SolidWorks and/or AutoCAD., • Ability to read and interpret blueprints, GD&T, engineering drawings, and technical specifications., • Experience selecting tooling, fixtures, and machining strategies for precision components., • Strong troubleshooting and problem-solving skills., • Excellent communication and teamwork abilities.Desired Qualifications:, • Experience in medical device, aerospace, or other highly regulated manufacturing environments., • Familiarity with Lean Manufacturing and continuous improvement methodologies., • Experience performing first article inspections and process validation., • Knowledge of precision inspection equipment and metrology., • Understanding of ISO 13485, FDA-regulated manufacturing, or other quality management systems., • Experience mentoring or training CNC operators on setup and machining best practices.

Job Description We're looking for a FULL TIME Production Maintenance Technician is responsible for supporting daily manufacturing operations through equipment setup, troubleshooting, repair, and maintenance. This role requires strong multitasking abilities across mechanical, electrical, and utility systems, including water, steam, and pump systems. The mechanic must be able to diagnose issues quickly, perform timely repairs, and ensure reliable operation of production equipment and related systems. Essential Duties & Responsibilities Primary Responsibilities Perform setup, startup, maintenance, and repair of all production and processing equipment, including: • Rotary Fillers, • Piston Fillers, • Packette Fillers, • Tube Fillers, • Labelers, • Inkjet Coders, • Mixing Vessels, • Pumps, • Steam piping systems, • Copper piping systems Diagnose mechanical, electrical, and system failures and implement effective solutions. Conduct repairs on water systems, steam lines, pumps, and related utilities. Ensure equipment operates efficiently, safely, and in support of production schedules. • Perform additional duties as assigned to support department and company needs.Qualifications Technical Skills, • Proficiency with basic hand tools., • Strong pipe-fitting skills., • Working knowledge of electrical systems and repairs., • Strong diagnostic and troubleshooting abilities.Professional Skills, • Extremely detail-oriented and well-organized., • Ability to work independently with minimal supervision., • Strong time-management skills and ability to multitask., • Willingness to learn and continuously improve skills., • Flexibility and adaptability in responding to workload demands., • Consistent performance within established guidelines and procedures., • Effective verbal and written communication skills., • Ability to work collaboratively as part of a team.Required Experience & Education, • High School Diploma or GED required., • Minimum of two (2) years of related experience and/or technical training, or an equivalent combination of education and experience.Physical Requirements, • Ability to lift up to 50 lbs., • Ability to stand for the majority of the workday., • Ability to bend, stoop, twist, and perform physical tasks as needed. #2127LI

The QC Lab Technician serves as the front-line quality representative on the production floor, conducting product testing, verifying production requirements, and maintaining accurate records to ensure all products meet company and customer specifications. Quality Control Laboratory Technician.

Monitors meters, gauges, valves, flow ratios, temperatures, pressures, and related controls and guidelines to ensure adherence to production/process specifications. Includes Machine Operator, Process Operations, Product Assembly, and Production Technician roles. Manufacturing Production Technician.

This range reflects a mid-level role positioned between our entry-level Facilities Technician/Driver and our Facilities Supervisor, based on current Long Island / Hauppauge, NY market data for facilities and building maintenance technicians. The Facilities Technician II reports to the Production Man

Job Description Role summary We’re hiring a Survey Drafting Technician to join our land surveying team. You will convert field notes and survey data into accurate, production-ready CAD drawings and legal plats. This role suits a detail-oriented drafter who understands surveying principles, boundary documentation, and CAD standards. Key responsibilities • Produce CAD drawings from field data, GPS files, and survey notes., • Draft legal plats, boundary maps, and topographic plans following state and company standards., • Review and verify measurements, coordinate systems, and metadata for accuracy., • Annotate drawings with bearings, distances, easements, and other legal descriptions., • Coordinate with surveyors and project managers to resolve discrepancies and incorporate revisions., • Maintain drawing templates and layer standards to ensure consistency across projects., • Prepare files for printing and electronic delivery; manage version control. Required qualifications • 2+ years drafting experience in land surveying or civil engineering., • Proficiency in AutoCAD Civil 3D or equivalent CAD software., • Familiarity with survey data formats (CSV, DXF, DWG, GNSS/GPS exports)., • Strong understanding of boundary law basics, legal descriptions, and surveying terminology., • Excellent attention to detail and strong organizational skills., • Ability to read field notes and translate them into precise drawings. Preferred qualifications • Associate degree or certificate in Surveying Technology, Civil Drafting, or related field., • Experience with GIS software and coordinate transformations., • Knowledge of state-specific platting requirements and recording standards.

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance About the Firm: Haider Engineering P.C., established in 1998, commits its full resources to ensure the successful completion of all assigned projects. We are committed to providing quality construction engineering services to our clients. We retain on staff Resident Engineers, Design Engineers, Office Engineers, Team Leaders, Assistant Team Leaders, Estimators, Schedulers and Inspectors to carry out various engineering project assignments. Our excellent reputation is based on the quality of our work, the ability to maintain a work site, and the ability to consistently satisfy our clients. Our staff is well versed in the design and reconstruction of building, roadways, bridges, sewers, water mains and traffic control facilities. Our multidisciplinary capabilities, combined with the depth of our staff experience, enable us to handle a wide range of assignments of various types. Job Description: Haider Engineering P.C., a rapidly expanding REI firm, needs ACI Grade I Field Testing Technician and ACI Concrete Construction Special Inspector for a PANY&NJ project at Midtown Bus Terminal. Reporting Facility: Port Authority Midtown Bus Terminal (or various projects as needed). Duties and Qualifications: (ACI Grade I Field Testing Technician) • ACI Grade I Certified, • Verify daily concrete mix designs, • Perform fresh concrete testing and microwave water-to-cement ratio testing, • Perform post-placement inspections, • Identify non-conformances, • Take photos to capture all aspects of production on a daily basis, • OSHA 30 certified, • Current with Secure Workers Access Consortium, • Valid Driver's LicenseWe offer an excellent salary and benefits package with health insurance, a 401(k) plan and a positive and friendly work environment. Please contact for more details. Haider Engineering P.C. is an Equal Opportunity Employer.

Job DescriptionBenefits: • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance, • Wellness resources, • 401(k), • 401(k) matching, • Bonus based on performance, • Competitive salary About Us At 1-Tom-Plumber, our mission is simple: bring the dynamic value of our brand to every doorstep. We do this by combining diagnostics, sales, and service into a seamless process that delivers real solutions and empowers clients to make well-informed choices. We’re not just another plumbing company — we’re THE emergency plumber Long Island relies on 24/7, backed by the strongest brand and boldest promise in the market. We are seeking a skilled, client-focused Plumber who can deliver exceptional service, build lasting relationships, and consistently drive results. This is your opportunity to proudly wear the pink & black — the mark of our commitment to raising the standard of plumbing service across Long Island. The Role This is more than plumbing—it’s about bringing the 1-Tom brand experience to life at every doorstep. You’ll be both a trusted advisor and a skilled technician, guiding clients through a process of diagnostics, solutions, and service. Every interaction is a chance to build relationships, generate revenue, and deliver peace of mind. In your first 12 months, you’ll focus on: • Delivering “5 Star” client experiences by combining technical expertise, your authentic personality, and our proven processes., • Diagnosing, recommending, and selling solutions that empower clients to make confident, well-informed choices., • Hitting revenue goals, consistently producing a minimum of $35,000 in sales per month., • Participating in the after-hours on-call rotation, responding quickly to urgent plumbing emergencies., • Maximizing daily opportunities through clear communication with the operations and dispatch teams., • Caring for your tools and truck, ensuring equipment is clean, maintained, and ready for action.What Success Looks Like:, • A growing base of loyal customers who rave about their 1-Tom experience., • Reliable monthly revenue production of $35,000+ tied to diagnostics, recommendations, and completed work., • Quick, professional response to emergency calls that earns trust and repeat business., • Smooth daily coordination with dispatch, ensuring schedules and service calls run efficiently., • A well-maintained vehicle and equipment fleet that reflects pride in the brand.Who You Are:, • Client-focused pro: You know plumbing, but you also know how to connect, reassure, and build trust., • Sales-minded technician: You understand diagnostics and recommendations are part of delivering solutions., • Coachability-first: You’re open to feedback, training, and continuous improvement., • Team player: You thrive when collaborating and supporting others., • Tech savvy: You’re comfortable with mobile apps and modern dispatch systems., • Brand proud: You’ll wear the pink & black with confidence and represent 1-Tom with pride., • Safe driver: You maintain a clean motor vehicle record and respect the responsibility of operating a company vehicle.Pay Rate: This position offers a rate of $30 per hour. After successful completion of the probationary period (3 months), the plumber will have the opportunity to operate as a full-service technician running his/her own truck.

Job DescriptionBenefits: • 401(k), • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Training & development, • Vision insurance, • Wellness resources REPORTS TO: Maintenance Manager HOURLY RATE: $28.00- $45.00 TERMS OF EMPLOYMENT: Permanent | Full-Time, 12- hour Shift LOCATION: Copiague, NY About Us We provide full-service contract manufacturing, bottling, and packaging solutions for gummy natural health products, supporting clients from concept through launch. Operating within a regulated manufacturing environment, we are committed to quality, compliance, and continuous improvement. The Opportunity The Maintenance Technician is responsible for maintaining, troubleshooting, and repairing production equipment, utilities, and facility systems to support safe, reliable, and efficient operations in a GMP-regulated gummy manufacturing facility. This role performs preventive maintenance, responds to equipment issues, supports regulatory and food safety compliance, and partners with cross-functional teams to maximize equipment uptime and drive continuous improvement. What Success Looks Like • Consistently maintain equipment reliability and uptime through effective preventive maintenance and rapid troubleshooting., • Complete maintenance work safely and compliantly while adhering to GMP, food safety, and company safety requirements., • Respond quickly and effectively to equipment issues to minimize downtime and support production targets., • Identify and implement continuous improvement opportunities that enhance equipment performance, efficiency, and reliability. RESPONSIBILITIES: • Responsible for installation, maintenance and repair of machinery and mechanical equipment., • Maintain all types of equipment through a preventative maintenance program and log all details into a CMMS database. (Limble), • Read, interpret, and follow instructions and operation manuals., • Maintain a safe, clean, and organized work area., • Read blueprints and sketches proficiently to fabricate equipment and make modifications., • Repair or replace chains, belt conveyors, gear boxes/drive chains, hydraulics & pneumatics, welding/cutting, and use power tools., • Maintain HVAC systems, water softener systems, chiller units and other utilities., • Prioritize safety in approach to all work activities., • Focus on Continuous Improvement to streamline work processes. QUALIFICATIONS: Experience & Education • Highschool graduation or GED required, 2-year related diploma preferred., • At least 2 years’ experience in equipment repair, maintenance and troubleshooting in a manufacturing environment, food manufacturing preferred. Technical Skills, • Knowledge of mechanical equipment, electromechanical or controls experience preferred., • Experience with industrial electrical components is required, • Experience with electrical, HVAC and chiller systems would be considered an asset., • Must be able to read, write, and understand English., • Excellent problem-solving and communication skills Working Conditions and Physical Requirements • Willingness to work shift schedule including nights, weekends and overtime as required., • Must be able to wear all required personal protective gear., • Stoop, reach, kneel or crouch., • Exposure to moving mechanical parts., • Exposure to excessive noise and some hazardous materials., • Lift 25+ pounds overhead, • Turn, bend, reach, pull, and walk., • Stand for extended periods of time; up to 12 hours. This job description is not intended to be all-inclusive. Employees may be required to perform other job-related duties as needed to meet business, operational, quality, safety, or regulatory requirements. Our Commitment to Inclusive Hiring We are committed to building an inclusive and accessible workplace. We welcome applications from individuals of all backgrounds and experiences. Accommodations are available throughout the recruitment process upon request.

Job Description Manufacturing Technician Starting at $17.50/hr. | Full-Time We are looking for a dependable, hands-on teammate to join our glass tempering production team. This role is a good fit for someone with manufacturing, production, construction, warehouse, equipment, or other physical work experience who takes pride in doing the job right. Glass experience is not required. We will train the right person on our equipment, process, paperwork, and quality standards. What we need from day one is reliability, attention to detail, urgency, and the willingness to stay productive without someone standing over your shoulder. This is a physical, fast-moving production environment. Successful teammates learn the machine, understand the process, prepare for the next order, notice quality concerns, and help keep the area moving. Over time, this role develops into a skilled production position involving machine operation, setup, adjustments, process knowledge, and support with equipment care. This role may be a good fit if you: • Show up on time and take attendance seriously., • Like hands-on work and staying busy., • Take pride in quality and accuracy., • Can follow paperwork, measurements, and production instructions., • Notice when something looks wrong and speak up., • Want to learn equipment, machines, and production processes., • Can work without needing constant reminders., • Are comfortable with physical work in a manufacturing environment., • Want a long-term opportunity with growth and pay progression. This role is probably not a good fit if you: • Prefer a job where you wait for someone to tell you every next step., • Are not comfortable with physical production work., • Struggle with consistent attendance or being on time., • Do not like repetitive work, quality checks, or following detailed instructions., • Prefer a slower-paced role without production expectations., • Are looking for a position where downtime means standing around. Responsibilities include: • Moving and handling glass safely through the tempering process., • Operating and monitoring production equipment., • Reading work orders, measurements, and production requirements., • Performing quality checks throughout the process., • Preparing materials and staging upcoming work., • Keeping the work area clean, organized, and production ready., • Reporting safety, quality, paperwork, or equipment concerns., • Learning machine setup, adjustments, troubleshooting, and basic equipment care over time. Qualifications: • Prior hands-on work experience in manufacturing, production, construction, warehouse, logistics, equipment operation, or a similar environment preferred., • Strong attendance and reliability required., • Ability to work at a steady production pace., • Mechanical aptitude or interest in learning equipment operation preferred., • Ability to read a tape measure., • Ability to lift up to 75 lbs. and stand, bend, reach, push, pull, and move throughout the shift., • Positive attitude, team mindset, and willingness to learn. Benefits: • 401(k), • 401(k) matching, • Health insurance, • Dental insurance, • Vision insurance, • Paid time off Work Location: On-site - Ronkonkoma, NY | Monday to Friday | Weekends as needed We are looking for teammates who want to build skills, grow with the company, and take pride in their work.

Job DescriptionDescription: Position Summary Are you a skilled mechanic or technician looking for an exciting opportunity in the pharmaceutical industry? Join our team and play a key role in keeping our state-of-the-art manufacturing and packaging equipment running at peak performance. You’ll work hands-on with advanced machinery, help maintain facility upgrades, and be part of a collaborative team that produces critical healthcare products. Job Type: Full-Time Location: Hauppauge, NY Works Hours: Monday – Friday, 8:00AM – 4:30PM; 4:30PM - 1:00AM Pay Range: $24.00 - $40.00 per hour, depending on experience and shift Start Date: ASAP What Makes This Role Exciting • Work on high-tech, industrial-level equipment in a regulated pharmaceutical environment., • Be part of a team that produces products impacting consumer health and well-being., • Opportunity to troubleshoot and solve complex mechanical and electrical challenges., • Hands-on experience with cutting-edge machinery and automation systems., • Career growth potential in a company that values skill development and cross-training. Why Join CPC? At CPC, you’ll be part of a team that has set the standard in pharmaceutical development and contract manufacturing since 1971, helping bring high-quality OTC, dietary supplement, and prescription products to market faster and safer than ever. We pride ourselves on quality as a core value, innovative problem-solving, and a collaborative culture where everyone plays a role in advancing formulation and manufacturing excellence. CPC offers an inclusive, respectful workplace with opportunities to grow your skills and career while working with cutting-edge technologies and serving leading global brands. With a commitment to employee success, competitive benefits, and a culture built on teamwork and integrity, CPC is a place where your contributions truly make an impact. Requirements: Responsibilities In this role, you will: • Perform repairs, overhauls, and preventive maintenance on manufacturing and packaging equipment with minimal supervision., • Troubleshoot and diagnose mechanical and electrical issues efficiently., • Respond to emergency or unscheduled repairs to keep production running smoothly., • Maintain and upgrade facility equipment as required., • Safely use a variety of hand and power tools., • Document maintenance work and maintain equipment for optimal performance., • Assist in compiling operating instructions or standard procedures for equipment., • Support the team and take on additional responsibilities as assigned. Education and Experience • High school diploma or GED required; trade school or college coursework preferred., • Minimum 2 years of hands-on experience with MIG/TIG welding, mills, turning machinery, or other industrial equipment., • Experience in pharmaceutical manufacturing or packaging is a plus. Skills, Knowledge, and Abilities: • Ability to read and interpret electrical schematics and mechanical diagrams., • Familiarity with PLCs (Programmable Logic Controllers) and VFDs (Variable Frequency Drives)., • Strong attention to detail and commitment to quality., • Ability to work independently or as part of a team., • Knowledge of company SOPs, GMPs, and safety guidelines., • Understanding of industrial production systems and machinery operations.

Job DescriptionDescription: Northeast Aero Compressor and PG Aerotech are seeking an experienced Facilities Technician II to help maintain the safe, compliant, and efficient operation of our 55,000 square foot FAA Part 145 certificated repair station and MRO facility in Hauppauge, NY. This is a mid-level, hands-on role for a technician who has moved beyond entry-level building maintenance and is ready to take on greater ownership of preventive maintenance programs, more complex mechanical and electrical troubleshooting, and vendor coordination — while continuing to perform daily hands-on repair and upkeep work. The Facilities Technician II reports to the Production Manager and works closely with them to keep all building systems, ground support equipment, and industrial machinery running reliably. Requirements: • Perform routine and corrective maintenance on HVAC, electrical, plumbing, lighting, and overhead door systems, escalating only the most complex issues to the Facilities Supervisor, • Execute scheduled Preventive Maintenance (PM) tasks and help maintain accurate maintenance logs, service records, and equipment histories in compliance with repair station requirements, • Diagnose and troubleshoot mechanical, electrical, and pneumatic/hydraulic issues on industrial equipment and aviation ground support equipment, • Assist in coordinating third-party vendors and contractors for specialized inspections, certifications, and repairs, • Perform general building maintenance including carpentry, painting, minor structural repairs, and groundskeeping/snow removal as needed, • Conduct routine facility and safety inspections, identify hazards or worn components, and proactively address or report them, • Support the cleanliness and organization of the facility, including production floor, offices, break rooms, restrooms, and grounds, • Help ensure fire and life-safety systems are functioning correctly and are tested/documented on schedule, • Operate company vehicles and material handling equipment (e.g., forklift) to move tools, parts, and supplies between areas or job sites, • Maintain compliance with FAA Part 145 repair station requirements, OSHA regulations, EPA standards, and applicable building codes, • Respond to maintenance requests from building occupants and prioritize/resolve issues promptly Experience and Skills • 2–5 years of experience in building/facilities maintenance, industrial maintenance, or a related mechanical/electrical trade; aviation, manufacturing, or regulated-facility experience preferred, • Working knowledge of HVAC, electrical, and plumbing systems, with demonstrated ability to independently troubleshoot and repair common issues, • Some exposure to industrial equipment such as compressed air systems, generators, or pneumatic/hydraulic equipment preferred, • Comfortable using hand and power tools safely and effectively, with strong mechanical aptitude and problem-solving skills, • Ability to work independently on assigned tasks while collaborating with the Facilities Supervisor on larger projects, • Strong communication and customer service skills when responding to occupant requests, • Ability to pass a pre-employment and random drug and alcohol screening as well as a background check Physical Requirements • Ability to lift at least 50 pounds, • Comfortable working at heights on ladders and lifts, and in confined spaces, outdoor environments, and varying temperatures, • Manual dexterity and ability to constantly manipulate small to medium components, • Ability to stand, walk, bend, and climb stairs for extended periods, • Frequent use of hand tools, power tools, and cleaning/lubricating/painting chemicals Education / Licenses / Certifications • High school diploma or GED required; trade school training or an associate degree in a mechanical, electrical, or facilities-related discipline preferred, • Valid state driver's license with a clean driving record required, • Forklift certification preferred, or ability to obtain within 30 days of hire, • OSHA 10-Hour (or higher) General Industry certification preferred, or willingness to obtain Compensation and Benefits • Full-time, hourly position: $28–$34 per hour, commensurate with experience, skills, and certifications, • This range reflects a mid-level role positioned between our entry-level Facilities Technician/Driver and our Facilities Supervisor, based on current Long Island / Hauppauge, NY market data for facilities and building maintenance technicians, • Medical, dental, vision, and life insurance options, • 401(k) with 100% match on the first 4%, • Paid holidays, vacation, and sick/personal leave accrued from date of hire, • Training/education budget, gym reimbursement, complimentary drinks, company events, and philanthropy opportunities

Job Description Job Description Shop Manager / Production Manager TLC Auto & Truck Repair Center Position Title: Shop Manager / Production Manager Reports To: Owner / General Manager Location: TLC Auto & Truck Repair Center Position Summary The Shop Manager is responsible for overseeing all daily shop operations to ensure maximum productivity, efficiency, profitability, quality, and customer satisfaction. This position serves as the leader of the production team and is responsible for managing workflow, technician performance, vehicle turnaround times, and overall shop performance. The Shop Manager works closely with owner, Service Advisors, Estimator, Parts manager and Technicians to achieve monthly sales, gross profit, billed hour, and customer service goals while maintaining a positive and productive work environment. Key Responsibilities Production Management • Manage daily workflow and shop scheduling., • Assign repair orders and work evenly among technicians., • Monitor repair progress and ensure vehicles are completed on time., • Eliminate production bottlenecks and downtime., • Ensure proper vehicle dispatching and technician utilization., • Maintain efficient shop capacity and workflow management. Team Leadership • Lead, coach, and develop technicians and shop personnel., • Conduct regular performance reviews and training discussions., • Promote accountability, teamwork, and professionalism., • Address performance issues promptly and professionally., • Assist in recruiting, interviewing, and onboarding new technicians., • Financial Performance, • Drive monthly billed hour goals and shop productivity targets., • Monitor technician efficiency and productivity metrics., • Manage labor gross profit and overall shop profitability., • Review shop performance reports and identify improvement opportunities., • Work with management to achieve monthly and annual business objectives., • Quality Control, • Ensure repairs meet TLC Auto & Truck quality standards., • Perform quality control inspections before vehicle delivery., • Minimize comebacks and warranty repairs., • Maintain compliance with manufacturer and industry repair procedures., • Customer Satisfaction, • Support Service Advisors in resolving customer concerns., • Ensure repairs are completed accurately and professionally., • Assist in maintaining a positive customer experience., • Help build long-term customer relationships through exceptional service., • Safety & Facility Management, • Enforce all company safety policies and procedures., • Maintain a clean, organized, and professional shop environment., • Ensure equipment is maintained and operating properly., • Promote safe work practices among all employees., • Performance Expectations, • The Shop Manager will be evaluated on:, • Monthly billed hours, • Technician productivity, • Technician efficiency, • Gross profit performance, • Shop profitability, • Vehicle turnaround time, • Customer satisfaction, • Employee retention and development Quality control and reduction of comebacks #hc250890

Job Description Position Summary The Maintenance Technician III is a senior-level, hands-on maintenance professional responsible for diagnosing, repairing, and maintaining manufacturing equipment, utilities, and facility systems to ensure safe, reliable, and compliant operations. This role serves as a technical expert and escalation point for complex mechanical, electrical, and controls issues, while supporting preventive maintenance execution and reliability improvements across the site. With a strong commitment to Grandma Quality, the Maintenance Technician III demonstrates pride in workmanship, accountability, and leadership by example. This role partners closely with Operations, FSQA, Sanitation, and Reliability to minimize downtime, support food safety, and ensure equipment and facility systems are production-ready at all times. Key Responsibilities • Perform advanced troubleshooting, repair, and maintenance of manufacturing equipment, automation systems, and utilities, including mechanical, electrical, pneumatic, hydraulic, and controls systems., • Serve as a senior technical resource for complex or recurring equipment failures, providing root cause analysis and sustainable corrective actions., • Execute and support preventive and predictive maintenance activities to improve equipment reliability, uptime, and asset life., • Lead or support equipment changeovers, installations, rebuilds, and modifications to support operational needs and continuous improvement., • Mentor and support Maintenance Technician I and II team members through on-the-job training and knowledge sharing., • Maintain, troubleshoot, and repair facility and utility systems including HVAC, refrigeration, compressed air, plumbing, steam, electrical distribution, and wastewater-related equipment, as applicable., • Ensure all maintenance work complies with safety standards, food safety requirements, GMPs, and company policies., • Document work orders, repairs, inspections, and parts usage accurately in the CMMS., • Support FSQA inspections, audits, and corrective actions related to equipment condition and maintenance practices., • Coordinate with contractors and vendors to ensure safe, compliant, and high-quality work., • Respond promptly to equipment breakdowns to minimize production downtime., • Reinforce a culture of safety, craftsmanship, accountability, and respect. Qualifications • High school diploma or GED required; technical or vocational training preferred., • 5+ years of progressive maintenance experience in a manufacturing or industrial environment., • Advanced knowledge of mechanical, electrical, pneumatic, hydraulic, and basic PLC systems., • Ability to independently diagnose and repair complex equipment issues., • Experience in food manufacturing or regulated environments preferred., • Ability to read electrical schematics, mechanical drawings, and technical manuals., • Strong problem-solving skills and attention to detail., • Ability to work independently and collaboratively with cross-functional teams. Essential Physical Requirements • Ability to stand, walk, bend, kneel, and climb for extended periods., • Ability to safely navigate ladders, platforms, catwalks, and rooftops., • Ability to lift, push, pull, or carry up to 50 pounds., • Ability to work in varying environmental conditions including temperature extremes, noise, and humidity., • Ability to wear required PPE., • Ability to work nights, weekends, holidays, or extended hours as required., • Ability to communicate clearly and effectively verbally and in writing. This job description is intended to describe the general nature and level of work being performed. It is not an exhaustive list of all responsibilities, duties, or skills required. Duties, responsibilities, expectations, and reporting structures may change at any time based on business needs, organizational priorities, or operational requirements, with or without notice.

Job Description JOB DESCRIPTION Position: Mechanic OVERNIGHT Shift: 12:00 am to 8:00 am Schedule: Monday through Friday, occasional Saturdays as needed. Reports To: Facilities Manager Employment Status: Full Time FLSA Classification: Hourly- Non/ Exempt Compensation Range: $32.00 -$35.00 Job Summary: Cookies United, a quality driven cookie company based in Islip, NY, is looking to hire an overnight mechanic to have production lines set up for early production. The shift mechanic will troubleshoot equipment problems and perform the required maintenance to ensure smooth mechanical operations. Job Responsibilities: • Assess, adjust, and fix production machinery and equipment., • Adjusts equipment as required in a non-operator’s capacity., • Observe and ensure all equipment performs as required after production has set up lines., • Responds to requests from all departments based on priorities., • Replacement of factory parts and components on our full line of products., • Executes PMs and preventive breakdown as directed by the maintenance manager., • Assesses all mechanical and electrical failures, repairs, breakdowns as needed. Reports all to maintenance manager., • Completes daily shift report to the maintenance manager and the maintenance team., • Any other tasks assigned based on business needs. Job Requirements: • Mechanical skills and knowledge of mechanical systems., • Troubleshooting skills., • Ability to read and follow manuals, electrical, and mechanical diagrams., • Strong interpersonal and communications skills., • Motivation to become self-sufficient and troubleshooting techniques., • The ability to be flexible with changing daily priorities in a fast-paced environment. Training and Experience: • Technician Certifications, • 4 - 6 years of direct mechanical experience, preferably in food manufacturing environments. Physical Demands and Work Environment: • Dexterity and coordination., • Lift and maneuver objects weighing more than 40 lbs., • Ability to work in cold and hot environments., • Walking: move about the entire plant., • Stand for long periods of time. Benefits: • Compensation based on experience + Annual Performance Bonus, • Medical, Dental, Vision, Life insurance & Voluntary Benefits (ADD, STD, LTD and FSA), • 401K Retirement Plan Paid Time Off: • 9 Paid Holidays, • 2 1/2 weeks (13 days) of vacation for year 1, • 3 weeks (15 days) of vacation for year 2, • Meal/Beverage voucher for your birthday, • Exciting fast-paced entrepreneurial learning environment

Job Description Position Summary The Maintenance Technician III is a senior-level, hands-on maintenance professional responsible for diagnosing, repairing, and maintaining manufacturing equipment, utilities, and facility systems to ensure safe, reliable, and compliant operations. This role serves as a technical expert and escalation point for complex mechanical, electrical, and controls issues, while supporting preventive maintenance execution and reliability improvements across the site. With a strong commitment to Grandma Quality, the Maintenance Technician III demonstrates pride in workmanship, accountability, and leadership by example. This role partners closely with Operations, FSQA, Sanitation, and Reliability to minimize downtime, support food safety, and ensure equipment and facility systems are production-ready at all times. Key Responsibilities • Perform advanced troubleshooting, repair, and maintenance of manufacturing equipment, automation systems, and utilities, including mechanical, electrical, pneumatic, hydraulic, and controls systems., • Serve as a senior technical resource for complex or recurring equipment failures, providing root cause analysis and sustainable corrective actions., • Execute and support preventive and predictive maintenance activities to improve equipment reliability, uptime, and asset life., • Lead or support equipment changeovers, installations, rebuilds, and modifications to support operational needs and continuous improvement., • Mentor and support Maintenance Technician I and II team members through on-the-job training and knowledge sharing., • Maintain, troubleshoot, and repair facility and utility systems including HVAC, refrigeration, compressed air, plumbing, steam, electrical distribution, and wastewater-related equipment, as applicable., • Ensure all maintenance work complies with safety standards, food safety requirements, GMPs, and company policies., • Document work orders, repairs, inspections, and parts usage accurately in the CMMS., • Support FSQA inspections, audits, and corrective actions related to equipment condition and maintenance practices., • Coordinate with contractors and vendors to ensure safe, compliant, and high-quality work., • Respond promptly to equipment breakdowns to minimize production downtime., • Reinforce a culture of safety, craftsmanship, accountability, and respect. Qualifications • High school diploma or GED required; technical or vocational training preferred., • 5+ years of progressive maintenance experience in a manufacturing or industrial environment., • Advanced knowledge of mechanical, electrical, pneumatic, hydraulic, and basic PLC systems., • Ability to independently diagnose and repair complex equipment issues., • Experience in food manufacturing or regulated environments preferred., • Ability to read electrical schematics, mechanical drawings, and technical manuals., • Strong problem-solving skills and attention to detail., • Ability to work independently and collaboratively with cross-functional teams. Essential Physical Requirements • Ability to stand, walk, bend, kneel, and climb for extended periods., • Ability to safely navigate ladders, platforms, catwalks, and rooftops., • Ability to lift, push, pull, or carry up to 50 pounds., • Ability to work in varying environmental conditions including temperature extremes, noise, and humidity., • Ability to wear required PPE., • Ability to work nights, weekends, holidays, or extended hours as required., • Ability to communicate clearly and effectively verbally and in writing. This job description is intended to describe the general nature and level of work being performed. It is not an exhaustive list of all responsibilities, duties, or skills required. Duties, responsibilities, expectations, and reporting structures may change at any time based on business needs, organizational priorities, or operational requirements, with or without notice.

Job Description iRocket is developing reusable, fully autonomous small launch vehicles to deliver more frequent, lower-cost access to space. We work across propulsion, structures, integration, and test domains, building toward an era of responsive launch systems. The Role: We are seeking a Manufacturing Technician to support the fabrication, assembly, and integration of structural and mechanical subassemblies for our rocket hardware. You’ll work closely with manufacturing and quality engineers to build reliable flight hardware in line with strict aerospace standards. • Manufacture and assemble flight hardware using methods such as drilling, fastening, bonding, and other mechanical processes, • Use precision calibrated tools (e.g. torque wrenches, micrometers, calipers), • Read and interpret technical drawings, blueprints, and work instructions, • Follow procedures, specifications, and test instructions to ensure hardware is built to design requirements, • Collaborate with manufacturing engineers and quality personnel to develop, refine, and document work instructions, • Ensure production tasks are completed on schedule, safely, and to the required quality, • Perform other related duties as needed to support efficient operations Requirements • High school diploma, GED, or equivalent work experience, • Strong communication and collaboration skills, • Ability to interact effectively (verbal and written) with engineering, production, and quality teams, • Experience in New Product Introduction (NPI) or development environments, • Precision drilling experience (tolerance ~ ±0.001 in), • Experience in aerospace, aviation, military, medical device, or other high-reliability industries, • Ability to read and interpret advanced technical drawings, manuals, and reports, • Proficient use of precision measuring instruments, • Experience working in cleanroom or controlled environments, • Familiarity with forklifts, cranes, or heavy equipment Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Ensuring the required materials are available for production, and that the factory is safe for all workers. Staying up-to-date with efficient methods of production and equipment maintenance procedures.

Nesco Resource - - Responsibilities: Review drawings, specifications, and assembly instructions to prepare for work; Position, secure, and assemble sub-components using hand tools, fixtures, and equipment; Inspect parts and assemblies using calibrated precision instruments and gauges; Record labor

Able to work in the production floor and comfortable to encounter electrical and mechanical components. Maintain daily production quantity records.

Nesco Resource - - Responsibilities: Assemble electronic components and circuit boards according to schematics, blueprints, and work instructions; Solder and connect wires, terminals, and connectors per specifications; Perform inspections and functional tests on assembled units to ensure quality co

Cintas Corporation - - Responsibilities: Apply and remove company emblems and ID tape/bar codes on uniform shirts and pants using an industrial heat sealing machine; Perform repetitive motions over the duration of the shift; Maintain daily accuracy for inventory control and accountability; Housekee

Nesco Resource - - Responsibilities: Assemble composite and electrometric materials with complex fixtures and tooling; Follow detailed instructions and blueprints to ensure accuracy and quality of work; Inspect finished products to ensure they meet quality standards; Maintain a clean and organized

Nesco Resource - - Responsibilities: Assemble fabricated components to make subassemblies or assemblies for electrical or electronic systems using hand and electrical tools; Assemble electronic subassemblies according to engineering specifications and work instructions; Perform detailed inspections

PrideStaff - - Responsibilities: Perform precise hand soldering on printed circuit board (PCB) assemblies following technical diagrams and schematics; Assemble electrical components, wire harnesses, and sub-assemblies; Identify basic electronic components (resistors, capacitors, diodes, etc.Conduct

Nesco Resource - - Responsibilities: Perform vacuum bagging and related processes for fabrication and curing composite parts; Assemble cores into lower sections of molds, to create mold assembly per work instructions; Clean and smooth molds, cores, and core boxes, and repair surface imperfections;

M - - Responsibilities: Collaborate with work center to meet production goals; Maintain high quality per specifications; Ensure safety and follow safety policies; Replenish raw materials, inspect, package, and palletize finished goods; Assist equipment operators and participate in equipment change-o

Danaher - - Responsibilities: Operate manufacturing equipment and monitor production processes; Maintain accurate production documentation; Support quality and continuous improvement efforts; Follow SOPs and work instructions; Escalate issues to minimize downtime.

Cintas Corporation - - Responsibilities: Load and unload trucks; Prepare or stage materials and garments; Perform production tasks as directed; Maintain cleanliness of work area; Meet or exceed quantity and quality standards.

Maintain daily production quantity records. Able to work in the production floor and comfortable to encounter electrical and mechanical components.

Cintas Corporation - - Responsibilities: Examine used garments for grading quality; Maintain clean work area; Meet production quality standards; Operate computer-based grading system.

Cintas Corporation - - Responsibilities: Clean, reshape, and sort used hangers for recycling and reuse; Maintain cleanliness of work area; Meet quantity and quality standards; Adhere to safety guidelines; Team collaboration to meet production targets.