Service engineer jobs in Trenton, New JerseyCreate job alerts

Open to: General Public Work Week: NE (35-hour) Work Week Salary: $66,894.99 (Non-negotiable) Opening Date: 9/24/2025 Closing Date: When all vacancies are filled Existing Vacancies: TBD Program/Location Department of Environmental Protection Air, Energy, & Materials Sustainability Air Quality and Radiation Protection 401 East State Street Trenton, NJ 08625 NJ Department of Environmental Protection Air, Energy, & Materials Sustainability Sustainable Waste Management 401 East State Street Trenton, NJ 08625 NJ Department of Environmental Protection Air, Energy, & Materials Sustainability Climate Change Mitigation & Monitoring 401 East State Street Trenton, NJ 08625 Scope of Eligibility Open to applicants who meet the requirements below. Description Under the close supervision of a supervisory official, in an Environmental Engineering Program in a State department, institution, agency, or local government agency, learns to conduct routine surveys, studies, inspections, and/or investigations relating to the improvement and/or monitoring of environmental conditions; learns to review engineering plans; learns to gather data, and research and analyze information as it relates to the enforcement of environmental laws/regulations; does other related duties as required. Requirements Education: Graduation from an accredited college or university with a Bachelor’s degree in Civil, Chemical, Mechanical, Environmental, Ocean, Coastal, Bio-Resource, Biomedical, Sanitary, Industrial, Agricultural, or Mining Engineering, or other field of engineering related to the environment. NOTE: An Engineer-In-Training (EIT) certification issued by the Division of Consumer Affairs, New Jersey Office of the Attorney General, may be substituted for the above education requirement. Applicants must submit proof of the EIT certification and the Fundamentals of Engineering (FE) exam results. The area of discipline indicated on the FE exam results must be in Chemical, Civil, Environmental, Industrial & Systems, Mechanical, or other disciplines. NOTE: All U.S. degrees and transcripts must be from an accredited college or university. All foreign degrees and transcripts must be evaluated for accreditation by a recognized evaluation service by the closing date of this posting. Failure to provide documentation may result in ineligibility. License Appointees will be required to possess a driver's license valid in New Jersey only if the operation of a vehicle, rather than employee mobility, is necessary to perform the essential duties of the position. SAME Applicants If you are applying under the NJ SAME program, your supporting documents (Schedule A or B letter) must be submitted along with your resume by the closing date indicated above. For more information on the SAME program, please visit ___, email , or call CSC at (609) 292-4144 and select Option #3. Veteran's Preference To qualify for New Jersey Veteran's Preference/status, you must establish Veteran's Preference through the Department of Military and Veteran's Affairs. Please submit proof of your Veteran's Preference along with your resume as indicated. For more information, please visit ___ Residency All persons newly hired on or after September 1, 2011, have one year from the date of employment to establish, and then maintain principal residence in the State of New Jersey subject to the provisions of N.J.S.A. 52:14-7 (L.2011, Chapter 70), also known as the “New Jersey First Act”. Benefits As a New Jersey State Department, NJDEP offers a comprehensive benefits package that includes: • Paid Benefit Leave, • Holiday Pay, • Alternative Workweek Program*, • Telework*, • Pension, • Deferred Compensation, • Health Benefits (medical, prescription drug, dental & vision care) and Life Insurance, • Flexible and Health Spending Accounts (FSA/HSA), • Commuter Tax Savings Program, • Public Service Loan Forgiveness (PSLF) Authorization to Work Selected candidates must be authorized to work in the United States per the Department of Homeland Security, United States Citizenship, and Immigration Services regulations. NOTE: The State of New Jersey does not provide sponsorship for citizenship to the United States. Equal Opportunity Employment The State of New Jersey seeks to increase the richness and diversity of its workforce, and in doing so, become the employer of choice for all people seeking to work in State Government. To evaluate the effectiveness of our efforts to attract and employ a diverse workforce, applicants are asked to voluntarily answer a few brief questions on the ___. All information is considered confidential and will be filed separately with the agency's affirmative action officer. This information will not be part of your application for employment and will not be considered in any hiring decision. DEP Notices of Vacancy have a 4:00 p.m. deadline on the closing date. When filing for these opportunities, please be sure to have your letter of interest and credentials sent electronically before 4 p.m. on the closing date. The New Jersey Department of Environmental Protection is an Equal Opportunity Employer and is committed to inclusive hiring and a diverse workforce. We strongly encourage people from all backgrounds to apply. Accommodations under ADA will be provided upon request.

Job DescriptionStructural Analysis Engineer - Hybrid Hybrid - On-site Tue/Wed/Thu Pay: $70.59-$80.40/hr | Full-Time | 12-Month Consultant Contract Schedule: Mon-Fri | 6 am-3 pm or 9 am-6 pm | Optional 9x80 About our client One of our prestigious clients in the aerospace engineering industry, operating for 50+ years and supporting some of the world’s most advanced aircraft programs. With thousands of engineers and technical specialists across hundreds of project sites, they drive innovation in commercial, defense, and space systems through cutting-edge design and analysis. Why join this team? • Competitive pay: $70.59-$80.40/hr, • Contribute to high-impact aerospace and space programs, • Work in a collaborative, innovation-driven engineering environment, • Medical, dental, vision, and life insurance, • Short-term disability & voluntary benefits, • Employee Assistance Program (EAP), • Commuter benefits, • 401(k) plan, • Paid sick leave and other applicable paid leave, • Holiday payRequirementsRequired, • Bachelor’s degree in engineering, computer science, mathematics, physics, or chemistry, • Typically 5+ years of related experience OR equivalent advanced education (PhD or Master’s + 3 years), • Proficiency in structural analysis, FEA methods, and simulation tools, • Must meet ITAR/EAR requirements (U.S. Person status or appropriate licensing)Preferred, • ABET-accredited engineering degree, • Strong problem-solving abilities and cross-functional collaboration skillsWhat you’ll do, • Develop, integrate, and document structural requirements to support system design, • Collaborate with cross-functional engineering teams to ensure design compatibility, • Use analytical methods, FEA models, and simulations to guide product design, • Create test plans, support test execution, and analyze/report results, • Define and document certification results for regulatory compliance

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology.About ProBioProBio proactively provides end-to-end CDMO service from drug discovery to commercialization with proactive strategies, professional solutions and efficient processes in cell and gene therapy, vaccine, biologics discovery and antibody protein drug to accelerate drug development for customers. ProBio's total cell and gene therapy solution covers CMC of plasmid and virus for IND filing as well as clinical manufacturing and commercial manufacturing. Job Scope: The Automation Engineer is responsible for administration and management of the site's automation systems, including Supervisory Control and Data Acquisition (SCADA) system, PLCs, notification systems and computerized QC Lab instruments. The scope of the responsibilities includes the initial installation, ongoing maintenance, periodic back-up, change control, validation, and retirement of systems. The incumbent works cross-functionally with internal departments including Information Technology, Manufacturing, Facilities & Engineering, Quality Control, and Quality Assurance, as well as external resources/vendors to maintain the site's automation systems. The incumbent supports adherence to relevant regulatory requirements and company Standard Operating Procedures (SOPs) as appropriate. Responsibilities: • Work closely with stakeholders to understand and fulfill system requirements and improve the quality of automated processes., • Collaborate with stakeholders, including Area Managers, System Owners, and System Users to ensure successful onboarding, use and retirement of automation systems., • Develop appropriate Validation Protocols, Reports, and Lifecycle documents., • Execute Validation Protocols and collecting test evidence., • Create and improve Administration SOPs of automation systems, • Monitor integrity, availability, performance and operability of automation systems., • Identify, investigate and correct technical issues, including performing root cause analysis for production errors., • Make adjustments, enhancements and applying patches or upgrades as required for automation systems, while adhering to the Change Control process., • Understand network operations, system operations, and Cloud-based systems., • Administer user access management., • Ensure compliance with applicable regulatory standards., • Maintain up-to-date knowledge of current technology trends, programming languages, and automation best practices for bioprocess equipment including single-use bioreactors, chromatography controllers, ultrafiltration skids, and QC instruments., • Author appropriate Change Controls and Test Scripts and serve as the Subject Matter Expert for applicable technical changes in automation systems., • Recommend and integrate new bioprocess equipment and Process Analytical Technologies (PAT)., • Liaison with Business, Quality Assurance, Managed Services, and IT to coordinate the Change Request processes, • Training: * • cGxP, • Applicable Corporate and Departmental Directives, Policies, and Procedures, • Good Manufacturing Practices and Good Documentation Practices, • Automation Control and Data Acquisition, • EHS, • Lab/Biological Safety, • Expertise in IT Networking and industrial automation systems, such as Rockwell Automation (Allen Bradley RS Logix), Wonderware Archestra platform, TopView, Vaisala ViewLinc, Unicorn software, DeltaV, various Repligen and Thermo Scientific instruments is a plus., • Bachelor of Science in Electrical Engineering, Computer Science, IT, Engineering, or related field of study with at least 5-7 years of related experience that provides direct scientific knowledge of automation systems operation and validation principles for computerized biologics production systems., • Proven experience as an IT Automation Engineer or similar role., • Direct knowledge of the biologics process equipment, SCADA/control systems, and supporting IT networking infrastructure., • Expertise in scientific / technical subject areas – Equipment Qualification, Computer System Validation, SCADA system architecture, Biotech Process Equipment/Systems., • Proficient in use of electronic systems, such as Microsoft Office, various specialized software including process documentation Veeva Vault, Material Management (SAP), Computerized Maintenance Management System (Maximo), Building Automation System (BAS)., • Knowledge of domestic / international regulatory guidelines / compendia and industry standards (FDA, ICH, USP and EMEA guidelines) for validation of computerized equipment and automation systems, including but not limited to 21 CFR Part 11, EU Eudralex Annex 11 and GAMP 5., • Analytical thinker with excellent problem-solving skills and the ability to adapt to changing priorities and deadlines., • Comfort with collaboration, open communication, reaching across functional borders and being proactive., • A strong focus on business outcomes. #PB #LW GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job DescriptionOpen to: General Public Work Week: NE (35-hour) Work Week Salary: $66,894.99 (Non-negotiable) Opening Date: 9/24/2025 Closing Date: When all vacancies are filled Existing Vacancies: TBD Program/Location Department of Environmental Protection Air, Energy, & Materials Sustainability Air Quality and Radiation Protection 401 East State Street Trenton, NJ 08625 NJ Department of Environmental Protection Air, Energy, & Materials Sustainability Sustainable Waste Management 401 East State Street Trenton, NJ 08625 NJ Department of Environmental Protection Air, Energy, & Materials Sustainability Climate Change Mitigation & Monitoring 401 East State Street Trenton, NJ 08625 Scope of Eligibility Open to applicants who meet the requirements below. Description Under the close supervision of a supervisory official, in an Environmental Engineering Program in a State department, institution, agency, or local government agency, learns to conduct routine surveys, studies, inspections, and/or investigations relating to the improvement and/or monitoring of environmental conditions; learns to review engineering plans; learns to gather data, and research and analyze information as it relates to the enforcement of environmental laws/regulations; does other related duties as required. Requirements Education: Graduation from an accredited college or university with a Bachelor’s degree in Civil, Chemical, Mechanical, Environmental, Ocean, Coastal, Bio-Resource, Biomedical, Sanitary, Industrial, Agricultural, or Mining Engineering, or other field of engineering related to the environment. NOTE: An Engineer-In-Training (EIT) certification issued by the Division of Consumer Affairs, New Jersey Office of the Attorney General, may be substituted for the above education requirement. Applicants must submit proof of the EIT certification and the Fundamentals of Engineering (FE) exam results. The area of discipline indicated on the FE exam results must be in Chemical, Civil, Environmental, Industrial & Systems, Mechanical, or other disciplines. NOTE: All U.S. degrees and transcripts must be from an accredited college or university. All foreign degrees and transcripts must be evaluated for accreditation by a recognized evaluation service by the closing date of this posting. Failure to provide documentation may result in ineligibility. License Appointees will be required to possess a driver's license valid in New Jersey only if the operation of a vehicle, rather than employee mobility, is necessary to perform the essential duties of the position. SAME Applicants If you are applying under the NJ SAME program, your supporting documents (Schedule A or B letter) must be submitted along with your resume by the closing date indicated above. For more information on the SAME program, please visit SAME Program, email , or call CSC at (609) 292-4144 and select Option #3. Veteran's Preference To qualify for New Jersey Veteran's Preference/status, you must establish Veteran's Preference through the Department of Military and Veteran's Affairs. Please submit proof of your Veteran's Preference along with your resume as indicated. For more information, please visit Residency All persons newly hired on or after September 1, 2011, have one year from the date of employment to establish, and then maintain principal residence in the State of New Jersey subject to the provisions of N.J.S.A. 52:14-7 (L.2011, Chapter 70), also known as the “New Jersey First Act”. Benefits As a New Jersey State Department, NJDEP offers a comprehensive benefits package that includes: • Paid Benefit Leave, • Holiday Pay, • Alternative Workweek Program*, • Telework*, • Pension, • Deferred Compensation, • Health Benefits (medical, prescription drug, dental & vision care) and Life Insurance, • Flexible and Health Spending Accounts (FSA/HSA), • Commuter Tax Savings Program, • Public Service Loan Forgiveness (PSLF), • Tuition Reimbursement**Pursuant to the State/Department's policy, procedures, and/or guidelines. Authorization to Work Selected candidates must be authorized to work in the United States per the Department of Homeland Security, United States Citizenship, and Immigration Services regulations. NOTE: The State of New Jersey does not provide sponsorship for citizenship to the United States. Equal Opportunity Employment The State of New Jersey seeks to increase the richness and diversity of its workforce, and in doing so, become the employer of choice for all people seeking to work in State Government. To evaluate the effectiveness of our efforts to attract and employ a diverse workforce, applicants are asked to voluntarily answer a few brief questions on the NJ Affirmative Action Information Form. All information is considered confidential and will be filed separately with the agency's affirmative action officer. This information will not be part of your application for employment and will not be considered in any hiring decision. DEP Notices of Vacancy have a 4:00 p.m. deadline on the closing date. When filing for these opportunities, please be sure to have your letter of interest and credentials sent electronically before 4 p.m. on the closing date. The New Jersey Department of Environmental Protection is an Equal Opportunity Employer and is committed to inclusive hiring and a diverse workforce. We strongly encourage people from all backgrounds to apply. Accommodations under ADA will be provided upon request. Powered by JazzHR Q5kc5D4pWX

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off About Advanced Infrastructure Design, Inc. (AID) Advanced Infrastructure Design, Inc. (AID) is a leading and rapidly growing consulting engineering firm with over 25 years of experience assessing and evaluating our nations aging infrastructure. Based in Central New Jersey and serving the Northeast and Mid-Atlantic regions, we have built a reputation for technical excellence and innovative solutions. Our team specializes in: • Pavement evaluation and design, • Non-destructive testing and evaluation (NDT/E) of transportation infrastructure, • Transportation materials testing and lab services, • Geotechnical design and subsurface investigation About the Role We are seeking an Entry-Level Civil Engineer to join our expanding Pavement Engineering practice. This position is ideal for recent graduates or early-career engineers who want to build a strong foundation in pavement engineering. You will gain exposure to all phases of pavement projects from data collection and evaluation to design and reporting while working under the guidance of experienced engineers. What Youll Do • Assist with pavement fieldwork operations, including data collection and survey activities., • Support the analysis of pavement performance data (e.g., GPR, FWD, and distress surveys)., • Help develop pavement design recommendations using industry-standard methods and software., • Contribute to the preparation of technical reports and support documentation., • B.S. in Civil Engineering (required)., • M.S. in Pavement Engineering (preferred)., • Strong interest in pavement, transportation, or geotechnical engineering., • Proficiency in Microsoft Office Suite and good technical writing skills., • Strong communication, organization, and teamwork abilities., • Previous internships, co-op, or coursework related to pavement engineering is highly desirable., • Willingness to travel locally for fieldwork as needed.Salary: $75,000/yr - $90,000/yr, depending on experience, credentials, including years of similar work experience. Why Join AID? • Work directly with senior engineers and industry experts in a supportive, team-oriented environment., • Gain hands-on experience with advanced pavement testing and evaluation technologies., • Competitive compensation and comprehensive benefits package., • Mentorship, training, and professional development opportunities to accelerate your career. If you are passionate about pavement engineering and eager to launch your career with a nationally recognized leader, we encourage you to apply! Please email your resume and a brief cover letter to Use the subject line: Application: Entry-Level Pavement Engineer.

Job Description About Bevara Named “Top Places to Work” and one of the “Fastest Growing Companies”, Bevara focuses on empowering our team members with the tools and support they need to reach their professional aspirations. We foster a vibrant, interactive team culture that values collaboration. We promote a healthy work-life balance and pride ourselves on working hard while also enjoying our time together! Be a part of something big and join our team! About the Position We are looking for a dedicated individual to provide world-class service at some of our commercial buildings in between Trenton and Eliabeth, New Jersey on a limited part-time basis. As a Flex Building Engineer, you will work alongside our Building Engineering team to provide support and back up coverage on an as-needed basis. The Flex Engineer will train with our full-time Building Engineer a few hours a month to stay current and familiar with the buildings and will act as back up coverage during vacations or possibly provide additional emergency support. As such, you will be responsible for maintaining the property’s physical condition and safeguarding it against damage, loss, and deterioration. The ideal candidate is proactive, self-motivated, and versatile—a true jack of all trades. The ideal candidate will have a flexible schedule- perhaps a retired Engineer or someone who owns their own business. This position is perfect for someone looking for some additional hours per month but not tied to a set schedule. Typical Hours: 1st shift What you’ll be doing • Conduct regular assessments of building systems., • Perform minor repairs, preventative maintenance, and respond to service requests for both interior and exterior building equipment., • Manage work order requests related to mechanical, electrical, plumbing, and fire systems., • Proactively maintain an ongoing task list for the property management team., • Serve as the primary contact for vendors, overseeing their check-in/out process and escorting them to their work areas while documenting the work completed., • Assist with fire panel and extinguisher inspections., • Ensure a safe job site and adhere to company, OSHA, and client-specific safety standards., • High School Diploma or GED., • Preferred 3-5 years of experience in commercial building operations and engineering., • Knowledge of HVAC, electrical, and plumbing systems., • Ability to manage multiple projects and make independent decisions., • Basic computer skills and proficiency with smartphones (email, texts, work order systems)., • Current and valid driver’s license. Offers of employment are contingent upon successful completion of the following: • Drug screening, • Background check, • Physical examination, • 401(k) retirement plans with company match starting Day 1!, • Free on-site parking., • Mileage reimbursement (When applicable)., • Uniforms plus annual uniform allowance., • Tools and equipment provided for your job., • Internal advancement opportunities Bevara Building Services provides equal employment to all persons. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. Powered by ExactHire:188647

Job Description Job Title: Construction Project Manager Location: Southeastern Pennsylvania and Central/Northern New Jersey About the Opportunity: An established and respected construction consulting firm is seeking experienced Construction Managers to serve as Owner’s Representatives for institutional building projects. This is a full-time position offering medical benefits, 401(k), and paid vacation. Position Summary: We are seeking skilled and experienced Construction Project Managers to oversee and manage construction projects from inception through completion. The successful candidate will ensure that projects are delivered on time, within budget, and in compliance with quality and safety standards. This position requires close coordination with architects, engineers, contractors, and clients to achieve successful project outcomes. Qualifications Experience: • 10–20 years of Construction Management (CM) or trade-level construction experience; or, • 5–10 years of CM experience with a degree in Engineering, Construction Management, or Architecture., • 1-5 years of experience for Project engineer position Project Types: • Experience in K–12, Higher Education, State, or County construction projects. (Residential experience not applicable.) Skills: • Computer literacy a must, • Proficient understanding of plans and specifications, • Organized, • Self-starter, • Excellent communication skills (oral and written), • Experience with scheduling, negotiations, and quality assurance, • Ability to run job meetings, coordinate project activities, and prepare detailed meeting minutes Specialized Roles Available: • Project Managers, • Mechanical Specialists, • Roofing Inspectors, • Project Engineers Ideal Candidate: We’re looking for professionals with a passion for building construction and a strong background in public and institutional projects to join our growing team of Owner’s Representatives. Salary: Pay range is $60,000 - $120,000.00 per year commensurate with education, experience and skills. Send Resumes to: , include a recent list of projects and references. Company DescriptionWe are a trusted and well-established leader in the construction management industry, proudly serving K-12 education, higher education, municipal, public, and private sectors across New Jersey and Pennsylvania for over 46 years. We specialize in providing comprehensive facility support services, delivering exceptional results for our diverse range of clients with a focus on quality, safety, and efficiency. Our staff includes Certified Construction Managers, Licensed Architects, Professional Planners, Building Inspectors, Certified Building Commissioning and LEED Accredited professionals, along with engineers, project managers, construction superintendents, HVAC and roofing experts, cost estimators, schedulers and support staff. Specializing in providing Owner’s Representative, Construction and Project Management, Commissioning and Retro-Commissioning, Roof Monitoring, and Project Recovery services. Our mission is nothing less than complete client satisfaction with every service we offer. Because each project is unique, our clients receive individual attention and solutions tailored to their needs, whether large or small.We are a trusted and well-established leader in the construction management industry, proudly serving K-12 education, higher education, municipal, public, and private sectors across New Jersey and Pennsylvania for over 46 years. We specialize in providing comprehensive facility support services, delivering exceptional results for our diverse range of clients with a focus on quality, safety, and efficiency.\r\n\r\nOur staff includes Certified Construction Managers, Licensed Architects, Professional Planners, Building Inspectors, Certified Building Commissioning and LEED Accredited professionals, along with engineers, project managers, construction superintendents, HVAC and roofing experts, cost estimators, schedulers and support staff. \r\n\r\nSpecializing in providing Owner’s Representative, Construction and Project Management, Commissioning and Retro-Commissioning, Roof Monitoring, and Project Recovery services. Our mission is nothing less than complete client satisfaction with every service we offer. Because each project is unique, our clients receive individual attention and solutions tailored to their needs, whether large or small.

Job Description POSITION SUMMARY: The Senior Engineering Technician – Municipal Engineer is a mid-level position with 3-5 years of experience. This individual will provide engineering services on all phases of an assigned project under the supervision of the Project Manager PRIMARY DUTIES: • Contribute to and oversee civil/site design for a wide variety of projects, including parks, municipal infrastructure, athletic facilities, schools, higher education campuses, and industrial/commercial developments., • Perform hydrologic and hydraulic modeling to support municipal stormwater management, roadway improvements, and drainage system upgrades., • Conduct utility coordination and support the preparation of construction documents for W/WW infrastructure. Assist with assigned municipal project tasks to ensure successful delivery within established scope, schedule, and budget requirements. • Work both independently and as part of a municipal project team, using sound judgment and technical expertise with limited supervision. KNOWLEDGE, SKILLS AND ABILITIES: • Proficient in AutoCAD® Civil 3d computer aided design software, • Proficient in the Microsoft Office Suite of software including, but not limited to Word Excel, PowerPoint, etc., • Ability to solve problems, • Strong oral and written communication skills, • Proven ability to multitask, appropriately prioritize workflow and complete tasks on schedule and within budget, • Excellent time management skills EDUCATION/EXPERIENCE: • Bachelors of Science Degree in Engineering (Civil Engineering Preferred) from an accredited four-year college or university CERTIFICATIONS/LICENSES REQUIRED: • Engineering-in-Training (EIT) required, working toward PE Licensure PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of a Construction Observer, the employee typically works in the field and may be exposed to outside weather conditions. Computer/technology is required to document and report work performed. The position requires the ability to lift and carry up to 50 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $70,000 - $91,500. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology.About ProBioProBio proactively provides end-to-end CDMO service from drug discovery to commercialization with proactive strategies, professional solutions and efficient processes in cell and gene therapy, vaccine, biologics discovery and antibody protein drug to accelerate drug development for customers. ProBio's total cell and gene therapy solution covers CMC of plasmid and virus for IND filing as well as clinical manufacturing and commercial manufacturing. Job Scope: Facilities Engineer will work with the Sr. Manager of Engineering, the integrated facility management group, Quality Management and Manufacturing Management on the daily operation of the manufacturing facility, utilities and processing / testing equipment at the Hopewell site. The role will involve review of equipment and system drawings, specifications, and submittals for general constructability, completeness, safety, maintainability, accessibility, operability, and conformance with the applicable codes, regulations, and design intent. Incumbent will ensure regulatory compliance of all inspection requirements; play a major role in end-user support, ongoing development, and support of the CMMS (Computerized Maintenance Management System). The incumbent must adhere to relevant regulatory requirements and company Standard Operating Procedures (SOPs) as appropriate. Essential responsibilities: • Review Equipment and System Drawings, Specifications, and Submittals for general, completeness, safety, maintainability, accessibility, operability, and conformance with the applicable codes, regulations, and design intent, • Review Change controls and IQOQ/PQ for new equipment onboarding and decommissioning., • Troubleshoot, determine root cause of problems and provide optimization strategies for utility systems and equipment within a multi-product, GMP facility., • Provide spare parts and reliability analyses for critical components, equipment, and systems, • Author and or review and approve documentation for QA Change Controls and Quality Events., • Serve as subject matter expert of the facilities/utilities/systems to support assigned work orders and close out facility related quality events as applicable, • Provide project team with utility system engineering design requirements and subject matter expertise. Communicate project requirements to vendors to obtain proposals for equipment and system ., • Manage CMMS System and configuration modules, workflow, development and user administration., • Support and maintain CMMS system reports; run queries and create ad hoc reports to support performance reporting , support compliance metrics and capacity planning., • Participates in and, as necessary, actively contributes to, investigator meetings., • Process GxP and non-Gxp lab instrument asset status updates (new, retirement, moves, owner changes, computer upgrades, etc.), • Create and revise formal work instruction that documented the standards for managing instruments within the CMMS (i.e. instrument naming conventions, parent / child hierarchical relationships, system owner identification, etc.)., • Assist in determining the appropriate service interval (frequency) and provider (internal vs. vendor) with owner's assistance Compensation: The salary range, dependent upon experience level, range is $80,000 - $110,000 annually. #PB #LW GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job DescriptionDescription: Kinsley Power Systems is seeking an Industrial Sales Engineer to add to their team! The Industrial Sales Engineer's main objective is to sell industrial power generation applications including related equipment (transfer switches, switchgear, load banks, fuel tanks, etc.) to end-users, engineers, electrical contractors, municipalities, government applications and OEMs, among others. Kinsley Power Systems, a family-owned business, has been an industry leader in generator service, sales and rentals for over 60 years. If you want to join a growing company with strong family values, a great culture, a company where you are valued for your hard work and have opportunities to grow – then look no further, come join our Kinsley family! Responsibilities: • Responsible for pursuing new project opportunities and closing sales, • Influences quote development, appropriate equipment and support services, project terms and conditions and ensuring customer support exists through the equipment warranty period, • Meets or exceeds quarterly sales quotas by driving sales with targeted customer types in identified verticals, as well as identifies opportunities with existing accounts in assigned territory, • Negotiates and closes deals which derive significant revenue and associated margins, • Understands the company's complete suite of products and services and identifies and hands-off cross-selling opportunities to other business verticals: residential equipment, rental agreements, prime power equipment, service contract sales, • Makes joint sales calls with appropriate technical/engineering sales resources - providing in-depth technical knowledge of the solutions we have to offer, • Develops long-term relationships with customer decision makers and influencers at the electrical contractor, engineer and building owner levels, • Maintains customer/project data in Customer Relationship Management software (CRM): Tracks active projects for weekly and monthly reporting, documenting of business development activity, and obstacles to success Preferred Skills and Experience: • Bachelor’s degree; or equivalent combination of education and experience will be considered on a case-by-case basis, • Proven passion and success in sales required, • Must be self-motivated with the ability to work independently and in a team atmosphere, • Possess a strong customer services focus with good verbal and written communication skills, • Must possess a strong sense of urgency and a proven ability to meet deadlines, • Proven competency in Microsoft Office, • Ability to work a flexible schedule, including overnight travel as required, • Possess and maintain a current, valid state driver’s license All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin. Requirements:

Senior Project Manager/Electrical Engineer-3rd Party Data Center Construction Job ID 244733 Posted 29-Oct-2025 Service line PJM Segment Role type Full-time Areas of Interest Construction, Data Centers, Engineering/Maintenance, Project Management Location(s) Remote - US - Remote - US - Un

Senior Project Manager/Electrical Engineer-Hyperscale Data Center Construction Job ID 244556 Posted 29-Oct-2025 Service line PJM Segment Role type Full-time Areas of Interest Construction, Data Centers, Project Management Location(s) Remote - US - Remote - US - United States of America

A multi-discipline engineering service provider in the metro region is looking for a Senior Structural Engineer to join their team. Licensed Structural Engineer or Professional Engineer. Function as Project Manager, Project Leader or Senior Engineer on specific projects as needed.

Job Description H&H Construction Services is offering exciting career opportunities for Resident Engineers with a Professional Engineer License. We currently have multiple inspection projects for movable and fixed bridges in Northern, Central and Southern New Jersey. With over 138 years of experience, H&H is a trusted full-service infrastructure engineering firm. Our clients, including infrastructure owners, contractors, and colleagues, rely on us for intricate and innovative engineering solutions. They trust our time-tested ability to manage the entire life cycle of a project, from the study and planning phase through to design and construction. With over 600 talented employees located across 30 offices nationwide, H&H can efficiently and effectively handle assignments of all sizes, types, and delivery methods around the country and across the globe. Responsibilities • Supervise on-site activities of the project, • Ensure compliance with specifications/ construction schedule and prepare progress reports, • Ensure optimal working of construction/ engineering personnel and maintain accurate field notes, • Review monthly contractor invoices for payment, • Organize and maintain all project shop drawings, RFIs, and other project documents, • Minimum of five years of bridge/highway experience, • Working knowledge of bridge and highway construction methods, materials, standards, and specifications, • NICET, ACI, SAT and Traffic Control certifications (preferred), • 10-hour OSHA safety training certification, • NJDOT and NJTA experience (preferred) We offer a professional work environment, competitive salary, benefits package and 401(k). EOE M/F/DISABILITY/VETS

Job Description Field Service Technician – full-time/permanent position • Remote position Our client is a global leader within the packaging industry and designs and manufactures equipment utilized to identify products, trace products, and protect company brands from counterfeiting. As a leading manufacturer of labeling, coding, and marking equipment, their products are utilized for printing logos, bar codes, lot codes, expiration dates, QR codes, etc. on consumer goods packaging. The Environment • You will be part of a dynamic team with incredible camaraderie where having fun is very important., • As a Field Service Technician, you will work with diverse world-class manufacturers, you will see how a wide variety of products are made. As a Field Service Technician (full-time/permanent position), you are the front line of customer interaction through delivering efficient field service support in your assigned territory. With advanced technical and product training, you will further contribute to the success of the company. In this entrepreneurial role, you operate from home and commute to some of the world's largest manufacturing companies. Everyday will be a new adventure as our customers include a wide variety of industries including: food, beverage, pharmaceutical, health and beauty, building products, automotive, etc. You will support customers by exceeding expectations through installations, repairs, and maintenance of coding and marking equipment. • Enhance customer satisfaction providing exceptional customer service., • Travel to customer sites and provide installation, emergency repairs, preventative maintenance services, and training., • Maintain first time fix, field response time, and customer satisfaction rate., • Verify that machines are operating at peak efficiency through proper installation and/or setup and testing., • Work as part of a regional and national field service team to drive customer satisfaction., • Responsible for timely and accurate documenting and reporting of all service related activities., • Provide timely feedback to quality department on equipment reliability and design., • Maintain a satisfactory parts inventory, requisitioning additional parts required to perform normal duties., • Exercise safe working practices and procedures at all times., • Complete detailed and accurate service reports and expense reports., • Conduct training with customer's employees to ensure an understanding of the theory of operation, proper functionality, and general maintenance of equipment. Qualifications • Prior experience in diagnosing, troubleshooting, repairing electro-mechanical equipment., • Being able to communicate effectively with all levels within an organization, from front line operators to senior management, and remaining professional at all times., • Knowledge and experience reading schematics and utilizing multimeters., • Ability to read, comprehend and interpret technical information involving mechanics and electronics., • Adaptability and flexibility is critical in the support of all customers., • Previous military or transitioning veterans encouraged to apply., • Prior Field Service Technician experience a plus, • Compensation $65,000-80,000 per year plus overtime, • Company provided cell phone, laptop and tools, • All travel expenses covered, • Generous paid holidays and personal time off, • Exceptional benefits including medical, dental, and vision insurance, • 401k with a company match Keywords: Field Service Technician, Electronics, Electromechanical Skills, Equipment Repair, Schematics, Service Engineer, Maintenance, Technician, Military, Veteran, Navy, Air Force, Marine Corps, Army, Veterans encouraged