Service engineer jobs in Yonkers, New YorkCreate job alerts

A company is looking for an L2 Software Support Engineer. Key Responsibilities Provide expert-level service for mission-critical data security products Perform advanced troubleshooting, incident response, and problem management Take ownership of complex customer issues requiring deep technical a

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Manufacturing Engineer Injection Molding - Eastchester, NY Plastics Engineer Process Engineer Manufacturing Engineer Project Engineer Plastic Molding Injection Mold Blow Extrusion Tooling Designer Moldmaking Lean Applications Thermoplastics Thermoset _ . Seeking individual able to join a large-volume producer of automotive component parts and refine complex production activities into efficient, cost effective and quality focused processes. Shall: * Create Design Of Experiments. * Recommend new equipment to fit production needs based on cost, efficiency and quality requirements. * Develop, improve and document new procedures for injection molding operations. * Train process technicians, setup personnel and operators on production activities. Qualifications: * Knowledge of industrial automation as well as Six Sigma, Lean Manufacturing, or similar. * 5+ years experience process engineering for injection molding operations. *** Familiarity with RJG Process Control hardware setup and operation. Excellent opportunity with generous benefits potential total compensation package up to $160,000 including end of year bonus, excellent health, medical, dental and vision insurance packages, company matched 401(k) and paid time off for vacations, personal days and sick days, company paid training and paid holidays. For complete details contact Christopher Moreno at: (609) 584-9000 ext 264 Or submit resume online at: Or email to: Please reference #427201NY1242 when responding. Diedre Moire Corporation Education Requirements: Bachelor DegreeMinimum Experience Requirements: 5-10 yearsJob City Location: EastchesterJob State Location: NYJob Country Location: USASalary Range: $90,000 to $160,000 Diedre Moire Corporation, Inc. diedremoire.com WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Plastics Engineer Process Engineer Manufacturing Engineer Project Engineer Plastic Molding Injection Mold Blow Extrusion Tooling Designer Moldmaking Lean Applications Thermoplastics Thermoset #DiedreMoire #PlasticMolding #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #manufacturingjobs #ProcessEngineerJobs DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove"" in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call (609) 584-5499

Field Service Technician Blow Molding - Mount Vernon, NY Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain Extrusion Blow Molding Injection Blow Molding or Injection Stretch Blow Molding Equipment Extruders Injection Molder Blow Molders Screw Plasticizers Screw Rotating Motors Guide Rails Moving Platens Heater Bands Hydraulic Pumping Systems Pneumatic systems Die Heads Dies Molds Mold Clamps Cold and Hot Cutters Blow Pins Control Panels Instrumentation Motion Controllers Motors Actuators Sensors Pumps Valves Gearboxes Cooling Fans Heating Bands _. Travel to customer facilities to troubleshoot, repair, and commission Bottle Molding equipment such as: Extrusion Blow Molding, Injection Blow Molding, or Injection Stretch Blow Molding Equipment and other equipment. * Commission, troubleshoot, and repair Blow Molding systems. * Inspect equipment for safe and proper operation. * Document observations and make suggestions for repairs and preventive maintenance, etc. * Adjust equipment to optimize operation. * Troubleshoot electrical instrumentation and control equipment and determine source of malfunction, perform repair, and start-up equipment. * Write Programmable Logic Controller, Human Machine Interface, and Variable Frequency Drive programs and make changes in the field as required. Excellent opportunity with generous benefits and base pay with end of year bonus. Top health, medical, dental and vision insurance packages, company matched 401(k) and paid time off for vacations, personal days and sick days, company paid training and paid holidays. For complete details contact Christopher Moreno at: (609) 584-9000 ext 264 Or submit resume online at: Or email to: Please reference #43042NY531 when responding. Diedre Moire Corporation Education Requirements: High SchoolMinimum Experience Requirements: 2-5 yearsJob City Location: Mount VernonJob State Location: NYJob Country Location: USASalary Range: $80,000 to $140,000 Diedre Moire Corporation, Inc. diedremoire.com WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain Extrusion Blow Molding Injection Blow Molding or Injection Stretch Blow Molding Equipment Extruders Injection Molder Blow Molders Screw Plasticizers Screw Rotating Motors Guide Rails Moving Platens Heater Bands Hydraulic Pumping Systems Pneumatic systems Die Heads Dies Molds Mold Clamps Cold and Hot Cutters Blow Pins Control Panels Instrumentation Motion Controllers Motors Actuators Sensors Pumps Valves Gearboxes Cooling Fans Heating Bands #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #fieldservicejobs #technicianjobs #MaintenanceMechanicJobs DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove"" in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call (609) 584-5499

Job Description Senior Mechanical Engineer Electromechanical Systems and Industrial Machinery Employment Type: Full-Time Industry Focus: Electromechanical Equipment I Automation Systems I Industrial Manufacturing I Robotics I Custom Machinery I Food and Beverage I Packaging I Water and Wastewater I Processing Equipment A privately owned, highly respected manufacturer with over 50+ years of success delivering complex, high-quality custom and benchmark electromechanical systems for critical infrastructure. Seeking to add to our engineering team a seasoned professional to help us build custom machinery used across the food and beverage, water treatment, packaging, energy, and automation sectors. Every system is designed, fabricated, and assembled on-site in their U.S.-based facilities. A financially stable, customer-trusted, and operates with speed, precision, and integrity. With low turnover, strong leadership, and a tight-knit, collaborative team, this is a rare opportunity for a senior-level engineer looking to make a real impact. Why Work Here • A privately-owned, financially secure, stable organization with a bold growth plan, your contributions matter here, • Recession-resistant with a strong, diverse client base, • All manufacturing and engineering done on-site in the U.S., • Short lead times and fully integrated workflow, • Diverse vertical markets including food processing, automated packaging, and industrial systems, • Long-tenured team with low turnover and deep technical experience, • Real mentorship from senior engineers and technical leadership, • A collaborative, team-first culture that values craftsmanship, integrity, and innovation, • Competitive salary + performance-based bonuses, • Clear pathways for career advancement into operations, technical leadership, or project management, • Access to ongoing technical training and development resources, • Opportunities to work on meaningful projects that impact essential industries, • Flexibility, autonomy, and a culture where good ideas get traction What You Will Do • Lead the design and development of mechanical and electromechanical systems, • Engineer custom industrial machinery, motion systems, and integration for real-world automation, • Create detailed 3D CAD models and drawings using Autodesk Inventor, SolidWorks, and AutoCAD, • Play a key role in the transition to Autodesk Inventor as the core design platform, • Collaborate with sales, drafting, production, service, and R&D teams to ensure design feasibility and performance, • Attend Factory Acceptance Tests, system demos, and customer meetings, • Conduct hands-on testing and root cause analysis to solve engineering challenges, • Recommend improvements to enhance reliability, manufacturability, and cost-efficiency, • Generate full technical documentation including BOMs, manuals, and assembly instructions, • Provide limited on-site support for commissioning and validation, travel is minimal (0 to 2 percent) What You Bring to the Role • Experience designing electromechanical equipment, custom machinery, and automated systems, • High-level proficiency in Autodesk Inventor preferred, along with SolidWorks and AutoCAD, • Solid understanding of GD&T, tolerance analysis, mechanical fasteners, motion control, and pneumatics, • Familiarity with PLM systems and NPI workflows, • Hands-on background and mechanical aptitude is strongly valued. Candidates who enjoy working on cars, engines, machines, or DIY projects often excel here, • Strong communication and collaboration skills with the ability to present technical information clearly to both internal teams and clients, • Associate or bachelor’s degree in Mechanical Engineering or a related discipline, or equivalent hands-on experience, • Proficiency in Microsoft Office and collaboration tools like SharePoint and Microsoft Teams Nice to Have ~But Not Required While not required, familiarity with the following codes and standards is considered a plus: • ASME Section VIII for pressure vessel design and inspection, • ASME B31.1 and B31.3 for power and process piping, • ASME Y14.5 for geometric dimensioning and tolerancing, • ASME B16.5, B36.10M for flanges, pipes, and fittings, • ASME PTC 4 and PTC 46 for boiler and plant performance testing Traits That Help Engineers Thrive Here • Curiosity and a hands-on mindset, • Creative approach to solving practical engineering problems, • Ability to see the big picture while staying detail-oriented, • Integrity, loyalty, and a team-first attitude, • Enjoys challenging workflow, with fresh projects, • Adaptability in a fast-paced manufacturing environment Let’s Build What’s Next – Together If you’re driven by precision, purpose, and the challenge of making great ideas real, we’d love to hear from you. Looking forward getting to know you… We are as well as our client are an equal opportunity employer and welcome all qualified applicants regardless of race, gender, age, disability, veteran status, or other protected classification.

Hanwha Vision America (HVA) is an affiliate of the Hanwha Group, a Fortune Global 500 company. HVA is an industry-leading provider of advanced network video surveillance products, including IP cameras, storage devices, and video management systems, founded on world-class technologies. We offer end-to-end security solutions and have achieved global success across a wide range of industry verticals, including retail, transportation, education, banking, healthcare, hospitality, and airports. Hanwha Vision America (HVA) is seeking a Repair/ Quality Engineer to support HTCC’s engineering and repair operations by performing intake screening, basic diagnostics, quality checks, and documentation. The role ensures that incoming units are properly evaluated, repair processes run efficiently, and completed products meet quality standards before shipment. This position combines repair-support responsibilities with quality assurance activities to improve workflow efficiency, accuracy, and overall service performance. Major Functions / Accountabilities • Perform initial screening and basic functional checks on incoming units, • Identify obvious issues or simple conditions that can be resolved before repair, • Support repair workflow by preparing units, organizing information, and performing basic diagnostics, • Conduct quality checks on completed repair units to ensure they meet internal standards, • Document inspection results and update system records accurately, • Assist with failure analysis for repeated issues and provide feedback to engineering, • Inspect packaging quality and verify final shipment readiness, • Collaborate with repair staff, engineering, logistics, and warehouse teams as needed, • Maintain checklists, guidelines, and standard procedures for inspection work, • Support process improvements related to efficiency, quality, and documentation compliance Knowledge, Skills & Requirements • Preferred background: Electronics, Electrical Engineering, Computer Engineering, or related field, • Basic understanding of electronic components (e.g., resistors, capacitors, diodes), • Ability to use multimeters and basic diagnostic tools, • Strong attention to detail and problem-solving skills, • Ability to follow technical checklists and standardized procedures, • Proficiency with Microsoft Office and basic system data entry, • Bilingual (Korean/English) preferred but not required

Field Support Engineer / Nexthink Systems Analyst (Onsite) Location: Paramus, NJ Full-Time Employment with CLIENT Work Type: 100% Onsite Overview: A hybrid role combining Field Support Engineering with Nexthink Systems Analysis. The engineer will provide in-person technical support for end users and local hardware while configuring and analyzing the Nexthink Digital Experience platform to identify and solve IT issues proactively. Key Responsibilities: Field Support (50%): • Provide onsite support for desktops, laptops, peripherals, and mobile devices., • Perform break/fix repairs, imaging, device deployments, and refresh cycles., • Troubleshoot OS, software, VPN, and network connectivity issues., • Support printers, AV, conference rooms, and other onsite systems., • Maintain accurate documentation and asset inventory. Nexthink / Systems Analyst (50%): • Configure Nexthink dashboards, alerts, and investigations., • Analyse endpoint performance and user experience data., • Identify trends and recommend proactive improvements., • Create reports and automate monitoring insights where possible., • Assist with incident correlation and digital experience optimization. Required Skills: • 3–5+ years of desktop / field support experience., • Strong hands-on troubleshooting across Windows/macOS., • Experience with Nexthink (configuration, analysis, dashboards, or investigations)., • Familiarity with ServiceNow or similar ticketing tools., • Excellent communication and customer service mindset., • Ability to handle physical hardware tasks. Preferred Qualifications: • Nexthink certifications., • PowerShell/Python scripting exposure., • Enterprise or multi-site support experience.

Job DescriptionWHO WE ARE Consumer Reports is an independent, nonprofit organization dedicated to a fair and just marketplace for all. CR is known for our rigorous testing and trusted ratings on thousands of products and services. We report extensively on consumer trends and challenges, and survey millions of people in the U.S. each year. We leverage our evidence-based approach to advocate for consumer rights, working with policymakers and companies to find solutions for safer products and fair practices. Our mission starts with you. We offer medical benefits that start on your first day as a CR employee that include behavioral health coverage, family planning and a generous 401K match. Learn more about how CR advocates on behalf of our employees. OVERVIEW AI and machine learning are redefining how CR serves consumers—helping people make informed choices through intelligent, data-driven experiences. The Full-Stack Software Engineer – AI/ML & Data Science will design, build, and deploy modern web applications and Services that operationalize AI and ML capabilities. Reporting to the Associate Director, AI/ML & Data Science, this role bridges cutting-edge data science with production-grade software, developing user-facing tools, APIs, and services that make AI models accessible and impactful. If you love working across the full technology stack—turning AI models and data into products that empower millions—this is the role for you. This is a hybrid position. This position is not eligible for sponsorship or relocation assistance. How'll You'll Make An Impact: As a mission-driven organization, Consumer Reports is pursuing an ambitious AI strategy designed to drive value for our customers, empower our employees with next-generation tools, and address AI harms in the digital marketplace. Join our Data Office and help execute on a strategic, multi-year roadmap focused on advancing Machine Learning and Generative AI initiatives. As a Full-Stack Software Engineer on the team you will: • Design and develop full-stack web applications, Data APIs, analytics dashboards that integrate AI/ML models., • Build and maintain backend services and APIs using Python (FastAPI, Django) and Node.js, integrating with Databricks, AWS SageMaker, or similar platforms., • Develop intuitive, responsive front-end interfaces using React.js, Next.js, JavaScript, and CSS (TailwindCSS or similar)., • Deploy scalable, cloud-native applications leveraging AWS, GCP, or Azure infrastructure., • Work with AI/ML engineers to implement Retrieval-Augmented Generation (RAG) pipelines, vector databases, and AI model endpoints., • Implement secure authentication, data access, and API management for consumer and internal applications., • Build CI/CD pipelines, automate testing, and optimize system performance for production workloads. You'll Be Highly Rated If: • You have the experience. 5+ years of experience building full-stack applications in production using Python, Javascript, SQL/NoSQL systems and frameworks., • You have the education. You've earned a Bachelor's degree in Computer Science, Engineering, or a related field., • You have experience integrating software systems with AI/ML services, Data APIs, or model endpoints., • You thrive on building software that bridges complex AI models with real-world use., • You enjoy working across frontend, backend, and cloud systems to deliver complete solutions. At Consumer Reports, we are committed to fair, transparent pay and we strive to provide competitive, market-informed compensation.The target salary range for this position is $100K-$120K. It is anticipated that most qualified candidates will fall near the middle of this range. Compensation for the successful candidate will be informed by the candidate's particular combination of knowledge, skills, competencies, and experience. We have three locations: Yonkers, NY, Washington, DC and Colchester, CT. We are registered to do business in and can only hire from the following states and federal district: Arizona, California, Connecticut, Illinois, Maryland, Massachusetts, Michigan, New Hampshire, New Jersey, New York, Texas, Vermont, Virginia and Washington, DC. Consumer Reports is an equal opportunity employer and does not discriminate in employment on the basis of actual or perceived race, color, creed, religion, age, national origin, ancestry, citizenship status, sex or gender (including pregnancy, childbirth, related medical conditions or lactation), gender identity and expression (including transgender status), sexual orientation, marital status, military service or veteran status, protected medical condition as defined by applicable state or local law, disability, genetic information, or any other basis protected by applicable federal, state or local laws. Consumer Reports will provide you with any reasonable assistance or accommodation for any part of the application and hiring process.

Job Description About Network Doctor Network Doctor is a premium IT Managed Services Provider delivering technology support and strategic guidance to clients across industries such as finance, healthcare, real estate, and professional services. We pride ourselves on a culture built on teamwork, curiosity, professionalism, and personal growth — all with the mission of making IT an enabler that helps businesses work smarter, faster, and happier. At Network Doctor, you’re not just a technician — you’re part of a team grounded in partnership, integrity, and continuous improvement. You’ll have a voice in a culture that values your curiosity and success, the satisfaction of representing a respected MSP onsite with high-profile clients, the support of a strong engineering network, and abundant opportunities for training and professional growth. About the Role We are seeking a smart, resourceful, and service-oriented L2 Support Engineer to provide advanced remote technical support for clients across the NYC Metro Area. This role is a key escalation point within our Help Desk, responsible for resolving complex issues, guiding L1 engineers, and ensuring an exceptional customer experience with every interaction. You’ll spend most of your time working from our Englewood Cliffs, NJ office delivering hands-on troubleshooting, system administration, and higher-level support across a wide range of technologies. While the role is primarily focused on escalations and remote service delivery, there may be occasional opportunities to assist with onsite visits when required, reflecting the collaborative nature of working within a Managed Services Provider environment. As a member of Network Doctor’s Help Desk team, you’ll be supported by a full group of engineers, system specialists, and senior escalation resources, ensuring you’re never on your own when tackling unfamiliar or challenging issues. This position requires professionalism, adaptability, and the ability to navigate complex technical environments with confidence and curiosity. You don’t need to know everything, but you do need to know how to investigate effectively, ask the right questions, and collaborate with your team to drive successful outcomes. Key Responsibilities: • Proficient at managing and maintaining:, • Enterprise networks and systems, including hardware, • Window Servers, Active Directory, GPOs, Hybrid Connectors, Conditional Access Polices, • Secure and redundant infrastructures, i.e. AV, firewalls, GPO, high-availability solutions, • Microsoft IaaS PaaS and SaaS offerings (Azure, 365, Entra/Intune, MDM/MAM), • Email security/filtering solutions, • Mac, • Some other technical facets, details or requirements of the position may include, but not limited to:, • Work in conjunction with Project Engineers to meet deadlines and client expectations., • Configure & manage Microsoft Server & Exchange Servers with PowerShell expertise., • Install, configure, and troubleshoot all network equipment, routers, firewall, switches, wireless access points, and SSL-VPN setups from various vendors, such as Cisco, Extreme, HP, Meraki, Netgear, SonicWALL, UniFi., • Manage Disaster Recovery and standard backup file restoration requests and support using Veeam, Azure Backup, SkyKick, Carbonite and others., • Diagnose and resolve unique, nonrecurring problems associated with application software and operating systems; determine the source of problems and classify their level, priority and nature., • Work with hardware and software vendors to verify timely product delivery and ensure that new equipment is installed and ready to operate on schedule., • Document procedures, standards, best practices configurations, settings, installation sequences and back-out instructions. Requirements: • Strong verbal and written communication skills, • Substantial experience with Windows Servers, • Strong understanding of fundamental networking concepts (switching/routing, DNS/DHCP, RADIUS authentication, WAP management, Email security protocols), • Strong experience managing and troubleshooting Microsoft Windows OS technology including AD Forests, Domains, Trusts, DNS, DHCP, Group Policy and Organizational Units, • Excellent interpersonal, customer service and problem-solving skills, • Strong time management and organizational skills with the ability to manage multiple tasks and changing priorities, • Ability to work collaboratively within a team A Plus to Have: • 2 + years technical experience relevant to the above, • A solid and well thought out diagnostic mindset, • Physical ability to lift and move heavy equipment (servers, computers, etc.), • Experience working with/at MSP’s, • Experience with RMM tools, • Familiarity with the ConnectWise Suite of products, • Proficiency in administering, configuring, maintaining and upgrading various VMware technologies, • Proficiency in administering, configuring, maintaining, and upgrading Citrix XenApp & XenDesktop environments, • Administering and configuring NAS and SAN technologies from various vendors, • A driver’s license and vehicle of your own and the ability to travel to client locations if needed

STAND 8 provides end to end IT solutions to enterprise partners across the United States and with offices in Los Angeles, New York, New Jersey, Atlanta, and more including internationally in Mexico and India. Our Technology Solutions team is seeking an experienced and highly skilled Site Reliability Engineer (Genetec) to join our team in support of a global Media & Entertainment client. Ideally, you will have advanced knowledge of Genetec Security Center and related security software, with the ability to set up servers, test software, create staging environments, and build connections to other systems. This role requires hands-on expertise in software development, system configuration, and network security. We are looking for team players that can add value with their contributions and enjoy working with a great group of people. This project will require the person to work onsite 5 days / week in Englewood, NJ. Our team is setting up interviews immediately and if you'd like to work in a dynamic Entertainment environment with a lot of action, you'll love this job! Responsibilities • Conduct regular system checks to ensure optimal performance, including verifying communication links., • Monitor and support the Genetec unified system, managing access control systems such as readers, panels, turnstiles, and other I/O devices, as well as video surveillance systems including cameras, LPR, and video analytics modules., • Perform initial diagnostic troubleshooting to identify and resolve simple network and system issues, escalating as necessary., • Uphold high standards and best practices, including testing, documentation, process application, and solution deployment., • Generate monthly metrics reports to track system availability and firmware status., • Maintain integrations with third-party solutions using restful API, IIS, and SQL querying for reporting modules., • Handle initial escalations from system failures and coordinate with third parties as needed., • Support and monitor facility systems such as Continuum, ScheduAll (resource/asset scheduling), EOMS (asset management), EPMS (Electric Power Monitoring System), and TripShot (Shuttle service portal)., • Participate in system upgrades and patching activities., • Provide support during major incidents and outages as required., • Collaborate with other engineering teams to integrate new tools and automate existing applications., • Interface with various Technology organization teams, including cyber, networking, firewall, Wintel, database, and data warehouse teams., • Manage access control and video devices for multiple campuses, both domestic and international., • Partner with Security Engineering team for system knowledge transfer., • Oversee vendor management., • Minimum of 3 years' experience with Genetec systems V5.11+ and knowledge of high availability enterprise architectural designs., • At least 3 years' experience designing scalable and reliable enterprise solutions, considering multi-tier software architectures, networking, and security., • 3+ years of experience in managing and maintaining facility management systems., • System administration experience with Windows and Linux., • Effective communication skills, both written and verbal, with stakeholders and engineers., • Experience with change management methodologies., • Proficiency with identity access systems., • Strong problem-solving abilities., • Ability to work within a fast-paced agile process., • Ability to build effective cross-functional relationships to deliver enterprise-wide solutions., • Self-starter, results-oriented., • Experience creating network and system diagrams for both established and new proposed deployments., • Familiarity with third-party systems and custom applications., • Current and active Genetec Enterprise certifications., • Fundamental understanding of Networking (Network+ or CCNA)., • 2+ years' experience with cloud-based infrastructure and platform services (Azure, AWS) preferred., • 3+ years of experience in developing, deploying, and operating facility management systems., • 3+ years of experience in support of Global Risk and response systems., • Experience with network protocols such as TCP/IP, SNMP, Modbus, and BACnet., • Ability to read and interpret drawings, wiring diagrams, and device data sheets. Our pay ranges are determined by role, level, and location. The range displayed on each job posting reflects the minimum and maximum target for new hires of this position across all US locations. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Benefits • Medical coverage and Health Savings Account (HSA) through Anthem, • Dental/Vision/Various Ancillary coverages through Unum, • 401(k) retirement savings plan, • Company-paid Employee Assistance Program (EAP) Our mission is to impact the world positively by creating success through PEOPLE, PROCESS, and TECHNOLOGY. Check out more at ; and reach out today to explore opportunities to grow together!

Job DescriptionLocation: Englewood, NJ- 5 days in office Title: Repair/ Quality Engineer Hanwha Vision America (HVA) is an affiliate of the Hanwha Group, a Fortune Global 500 company. HVA is an industry-leading provider of advanced network video surveillance products, including IP cameras, storage devices, and video management systems, founded on world-class technologies. We offer end-to-end security solutions and have achieved global success across a wide range of industry verticals, including retail, transportation, education, banking, healthcare, hospitality, and airports. Hanwha Vision America (HVA) is seeking a Repair/ Quality Engineer to support HTCC’s engineering and repair operations by performing intake screening, basic diagnostics, quality checks, and documentation. The role ensures that incoming units are properly evaluated, repair processes run efficiently, and completed products meet quality standards before shipment. This position combines repair-support responsibilities with quality assurance activities to improve workflow efficiency, accuracy, and overall service performance. Major Functions / Accountabilities • Perform initial screening and basic functional checks on incoming units, • Identify obvious issues or simple conditions that can be resolved before repair, • Support repair workflow by preparing units, organizing information, and performing basic diagnostics, • Conduct quality checks on completed repair units to ensure they meet internal standards, • Document inspection results and update system records accurately, • Assist with failure analysis for repeated issues and provide feedback to engineering, • Inspect packaging quality and verify final shipment readiness, • Collaborate with repair staff, engineering, logistics, and warehouse teams as needed, • Maintain checklists, guidelines, and standard procedures for inspection work, • Support process improvements related to efficiency, quality, and documentation complianceKnowledge, Skills & Requirements, • Preferred background: Electronics, Electrical Engineering, Computer Engineering, or related field, • Basic understanding of electronic components (e.g., resistors, capacitors, diodes), • Ability to use multimeters and basic diagnostic tools, • Strong attention to detail and problem-solving skills, • Ability to follow technical checklists and standardized procedures, • Proficiency with Microsoft Office and basic system data entry

Job DescriptionWHO WE ARE Consumer Reports is an independent, nonprofit organization dedicated to a fair and just marketplace for consumers. Our team is made up of truth tellers, change agents, and consumer advocates who investigate and build coalitions to fight for fairness and justice in the marketplace for consumers. We leverage our evidence-based approach to demand safer products, a healthier environment, and equitable services for everyone. Our mission starts with you. We offer medical benefits that start on your first day as a CR employee that include behavioral health coverage, family planning and a generous 401K match. Learn more about how CR advocates on behalf of our employees. OVERVIEW Consumer Reports (CR) is an 89-year-young, non-profit, with a mission to create a fair and just marketplace for all, focusing on Safety, Sustainability, Financial Fairness, and Digital Rights. The organization is on a multi-year journey to transform how we use Data and AI more strategically. Customer Data is at the heart of our ability to understand, engage, and empower consumers — enabling us to drive personalized experiences responsibly. As a Software Engineer (Data and Personalization), you will develop and optimize data-driven solutions and integrations that enable personalization, experimentation, and insights across CR's martech and digital ecosystem. You will partner with product, marketing, analytics, data and technology teams to power data pipelines, experimentation, analytics and real-time personalization features. This is a hybrid position, with preference for candidates in the tri-state area. How You'll Make An Impact As a Software Engineer (Data and Personalization), you will be hands-on in building and scaling data solutions that directly shape CR's member experiences. On a daily basis, you'll contribute in the following areas: • Data & Analytics Engineering: Build and optimize scalable data pipelines across lakehouses, data warehouses, and curated data marts, ensuring clean, high-quality data that serve diverse organizational needs., • Customer Data and Personalization Integrations: Connect customer data ecosystem with auxiliary platforms/tools that enable event/data collection, audience segmentation, campaign orchestration, customer engagement, and experimentation—ensuring seamless flow of data to power personalized consumer journeys., • Business Intelligence (BI): Deliver analytics-ready datasets and create dashboards in Tableau to measure personalization impact and inform decision-making ABOUT YOU You'll Be Highly Rated If: • You have the right foundation: Bachelor's degree in a STEM with strong computer science and engineering fundamentals, • You have relevant experience: 5 years of hands-on experience working on projects involving customer data and analytics engineering, ideally with exposure to modern CDP, personalization and MarTech platforms (e.g., Segment, Braze, Optimizely), • You have experience with AI and ML. Familiarity with applying machine learning models, recommendation systems, or behavioral analytics to power real-time, hyper-personalized experiences., • You understand Customer Data Platforms (CDPs). Experience working with CDPs to enable a 360-degree customer view that supports product and marketing initiatives. FAIR PAY AND A JUST WORKPLACE At Consumer Reports, we are committed to fair, transparent pay and we strive to provide competitive, market-informed compensation informed by location, as well as the candidate's particular combination of knowledge, skills, competencies, and experience. It is expected that most qualified candidates will fall near the middle of the posted salary range. We have three locations: Yonkers, NY, Washington, DC and Colchester, CT. We are registered to do business in and can only hire from the following states and federal district: Arizona, California, Connecticut, Illinois, Maryland, Massachusetts, Michigan, New Hampshire, New Jersey, New York, Texas, Vermont, Virginia and Washington, DC. Salary ranges • NY/California: $145K-$155K annually, • DMW/Massachusetts: $135K-$145K annually

Job Description The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its Design award winner for inclusivity for 2025. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies. Overview With the growth of our Android app, being the most used text-to-speech app in the Play Store, we find the need for a Senior Android Engineer to help us support the new user base as well as work on new and exciting projects to push us forward. This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, passionate about making product decisions, and has experience building great user experiences that delight users. We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. Our interview process involves several technical interviews and we aim to complete them within 1 week. What You'll Do • Owning major features and working closely with our design team - take ownership of features inside the app and become responsible of delivering high quality features, • Shape the future of our Android team, • Own, maintain and improve reliability metrics for key features, • Participate in discussions across different teams - Product, Design, Engineering, • Review pull requests, and support other teammates, • Handle critical issues or cope with unexpected challenges, • 5+ years of software engineering experience, • Familiarity with Android components, • Experience building or contributing to at least one Android app, • Product design intuition and user empathy, • Drive to push the boundaries of Android UI/UX, • Understanding of the importance of tests and how to approach writing tests, • Self-drive to improve the app and codebase above and beyond what's outlined in the spec, • Rock solid experience with Kotlin, Kotlin Coroutines, Kotlin Flow, Dagger 2, MVVM, Clean Architecture, Background Services, Music Player Service, Android Animations, Jetpack Navigation, JUnit tests, • Excellent communication skills, • User oriented problem solving approach, • Experience building, maintaining, or otherwise contributing to open source projects in Android, • Kotlin, • Kotlin Coroutines, • Kotlin Flow, • Jetpack Navigation, • Dagger 2, • Room, • Custom Views, Canvas & Paint, • Jetpack Compose, • A fast-growing environment where you can help shape the company and product., • An entrepreneurial-minded team that supports risk, intuition, and hustle., • A hands-off management approach so you can focus and do your best work., • An opportunity to make a big impact in a transformative industry., • Competitive salaries, a friendly and laid-back atmosphere, and a commitment to building a great asynchronous culture., • Opportunity to work on a life-changing product that millions of people use., • Build products that directly impact and support people with learning differences like dyslexia, ADD, low vision, concussions, autism, and more. Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Under the direction of the Manager Engineering – Lead Program & Special Projects, the Associate Engineer – Lead Program will be assisting in the construction delivery for the Lead Service Line Replacement Program. • This engineer will provide support to the Manager Engineering – Lead Program & Special Projects for the delivery of the $36M 2023 lead service line replacement program, which will result in the annual replacement of 2,600 service lines., • More specifically, the engineer will be provide assistance with work order management, data compilation, analyzing data to generate metrics on a weekly basis, and will assist in response to field-related matters including materials releases, acquisition of information from GIS, and invoice review to ensure appropriate billing., • Use of company resources including Hexagon, GIS, Google applications, and other electronic applications. This person may be required to perform inspections of new installations or other duties as assigned., • Responsible for the generation of weekly metrics, review and closing of work orders, work order generation, and interfacing with contractors, internal departments, and customers for the efficient and quality delivery of the lead service line replacement program., • Conduct field visits to confirm location of any existing facilities as required., • Field supervision of construction projects., • Work with other departments including Operations, Water Quality, and Customer Service., • Assist engineers in developing analysis and reports to be provided to regulators, internal or external customers as required., • The work environment is typically in an office/field environment but requires periodic inspection of the facilities where the employee will also be occasionally exposed to outside weather conditions and an industrial plant environment which involves moderate exposure to unusual elements, such as extreme temperatures, dirt, dust smoke, unpleasant odors, and/or loud noises., • Work environment also involves some exposure to hazards or physical risks, which require following industry safety procedures., • Certain projects may also require for construction to take place off hours (overnight/weekends)., • The duties of this position will require occasional travel to sites in Bergen/Hudson counties and infrequent travel to sites in Passaic and Sussex Counties, in New Jersey.Qualifications Education/Experience/Background: • Bachelor’s degree with either a Master’s in Civil/Environmental Engineering or an MBA, • 0-2 years experience of engineering design in a water utility environment, preferred., • Field experience and knowledge related to the construction delivery of water underground utility infrastructure projects., • Experience in Water/Wastewater Engineering is a plus., • Fundamental experience as an Engineer for underground infrastructure projects including service line replacements and distribution main projects., • Familiar with underground construction techniques including open cut and trenchless (pulling or boring) and utility connections and abandonments., • Experience in managing and adhering to project budgets and schedules., • High attention to detail., • Excellent analytical, organizational, computer and interpersonal skills., • Exercise discretion and independent judgment., • Extensive Knowledge of MS Office and AutoCAD. Intermediate Microsoft Excel skills are a must., • Able to work independently and on a team., • Good communication skills (verbal and non-verbal)., • Ability to read maps and verbally communicate with internal and external customers., • Travel Flexibility; ability to stand, sit in front of computer for extended periods of time. Additional Information Pay Range: $70000 to $80000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionWHO WE ARE Consumer Reports is an independent, nonprofit organization dedicated to a fair and just marketplace for all. CR is known for our rigorous testing and trusted ratings on thousands of products and services. We report extensively on consumer trends and challenges, and survey millions of people in the U.S. each year. We leverage our evidence-based approach to advocate for consumer rights, working with policymakers and companies to find solutions for safer products and fair practices. Our mission starts with you. We offer medical benefits that start on your first day as a CR employee that include behavioral health coverage, family planning and a generous 401K match. Learn more about how CR advocates on behalf of our employees. OVERVIEW Data powers everything we do at CR—and it's the foundation for our AI and machine learning efforts that are transforming how we serve consumers. The Data Engineer ( AI/ML & Data Science) will play a critical role in building the data infrastructure that powers advanced AI applications, machine learning models, and analytics systems across CR. Reporting to the Associate Director, AI/M & Data Science, in this role, you will design and maintain robust data pipelines and services that support experimentation, model training, and AI application deployment. If you're passionate about solving complex data challenges, working with cutting-edge AI technologies, and enabling impactful, data-driven products that support CR's mission, this is the role for you. This is a hybrid position. This position is not eligible for sponsorship or relocation assistance. How You'll Make An Impact As a mission based organization, CR and our Software team are pursuing an AI strategy that will drive value for our customers, give our employees superpowers, and address AI harms in the digital marketplace. We're looking for an AI/ML engineer to help us execute on our multi-year roadmap around generative AI. As a Data Engineer ( AI/M & Data Science) you will: • Design, develop, and maintain ETL/ELT pipelines for structured and unstructured data to support AI/ML model and application development, evaluation, and monitoring., • Build and optimize data processing workflows in Databricks, AWS SageMaker, or similar cloud platforms., • Collaborate with AI/ML engineers to deliver clean, reliable datasets for model training and inference., • Implement data quality, observability, and lineage tracking within the ML lifecycle., • Develop Data APIs/microservices to power AI applications and reporting/analytics dashboards., • Support the deployment of AI/ML applications by building and maintaining feature stores and data pipelines optimized for production workloads., • Ensure adherence to CR's data governance, security, and compliance standards across all AI and data workflows., • Work with Product, Engineering and other stakeholders to define project requirements and deliverables. You'll Be Highly Rated If: • You have the experience. You have 3+ years of experience designing and developing data pipelines, data models/schemas, APIs, or services for analytics or ML workloads., • You have the education. You've earned a Bachelor's degree in Computer Science, Engineering, or a related field., • You have programming skills. You are skilled in Python, SQL, and have experience with PySpark on large-scale datasets., • You have experience with data orchestration tools such as Airflow, dbt and Prefect, plus CI/CD pipelines for data delivery., • You have experience with Data and AI/ML platforms such as Databricks, AWS SageMaker or similar., • You have experience working with Kubernetes on cloud platforms like - AWS, GCP, or Azure. You'll Be One of Our Top Picks If: • You are passionate about automation and continuous improvement., • You have excellent documentation and technical communication skills., • You are an analytical thinker with troubleshooting abilities., • You are self-driven and proactive in solving infrastructure bottlenecks. FAIR PAY AND A JUST WORKPLACE At Consumer Reports, we are committed to fair, transparent pay and we strive to provide competitive, market-informed compensation.The target salary range for this position is $100K-$120K. It is anticipated that most qualified candidates will fall near the middle of this range. Compensation for the successful candidate will be informed by the candidate's particular combination of knowledge, skills, competencies, and experience. We have three locations: Yonkers, NY, Washington, DC and Colchester, CT. We are registered to do business in and can only hire from the following states and federal district: Arizona, California, Connecticut, Illinois, Maryland, Massachusetts, Michigan, New Hampshire, New Jersey, New York, Texas, Vermont, Virginia and Washington, DC. Consumer Reports is an equal opportunity employer and does not discriminate in employment on the basis of actual or perceived race, color, creed, religion, age, national origin, ancestry, citizenship status, sex or gender (including pregnancy, childbirth, related medical conditions or lactation), gender identity and expression (including transgender status), sexual orientation, marital status, military service or veteran status, protected medical condition as defined by applicable state or local law, disability, genetic information, or any other basis protected by applicable federal, state or local laws. Consumer Reports will provide you with any reasonable assistance or accommodation for any part of the application and hiring process.

Job Description Job Title: MES Engineer Job Summary: Full-time position as a Manufacturing Systems (MES) engineer. Under the general supervision of the IT Director/Manager, provides technical assistance in the use of administrative computing systems including MS/Oracle SQL, Windows Server Systems, IT infrastructures, as well as various reports to multi-cultural groups in multi-language (Korean). The specialist will learn knowledge of manufacturing systems while also providing technical assistance as described. Characteristic Duties and Responsibilities: • Assist in writing reports to various groups in multi-language (English/Korean), writing supporting documentation through SQL queries/ system provided reports., • Assist project teams in providing systems analysis and coordination in support of major system implementation., • Provide clear and professional verbal, written, and electronic communications amongst IT members, IT systems vendors, multi-cultural groups, and the end-user community. This includes preparing routine status reports, procedural guides, technical advice, and recommendations., • Meet and exceed end-user service requirements for maximum performance, stability, and reliability by daily monitoring and tuning existing Enterprise systems., • Provide recommendations for hardware (IT/Manufacturing) and software as requested. This will be achieved by gathering end-user requirements, analyzing existing systems, researching vendor specifications, and then reporting and presenting to IT team members as appropriate for further review., • Provide training & technical supports to end users on use of new/existing global systems., • Work collaboratively with Automation (PLC Control Engineers) for troubleshooting/improvements between manufacturing related systems and related equipment., • Identify and troubleshoot in a timely manner when system issues occur through DB access/In-house Interface programs related/connected with manufacturing equipment, • Perform other related duties as required. Minimum Qualifications: • Related Bachelor's Degree; or 3 years related experience and / or training; or equivalent combination of education and experience, • Strong troubleshooting methodology is required, • Possess a broad knowledge of servers along with operating systems, • Good customer service skills, communication, work independently and have interpersonal skills. Preferred Qualifications: • Possess a broad knowledge of MES. - Microsoft Certification, • Understanding of MS Office and other standard software, • Understanding of Active Directory and Windows System Infrastructures, • Bilingual as English and Korean fluency a plus Travel Required < 10%

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Under the direction of Manager of New Business, this person will develop, implement and manage capital improvement projects for transmission, distribution and treatment systems, including preliminary concept development, detailed engineering design, cost-estimations, bidding, construction supervision, start up process, as-built plans, refunds calculations, easement agreements and O&M manuals for all New Business Projects. Responsibilities will include capital project delivery from inception to completion, including preliminary conceptual development, detailed engineering design with support of external engineering consultants; construction cost estimation, procurement, construction administration, supervision and inspection, startup and commissioning, and project closeout documentation delivery, including as-built plans. The Project Manager will mainly manage all New Business projects for the Hackensack/Franklin Lakes system. Incumbent will also assist with New Business projects in the Highlands systems located in Passaic and Sussex Counties, in New Jersey as needed. This position will work on both water and wastewater networks; however, the majority of projects and responsibilities are in water. The most critical and unique aspect of this role involves managing complex coordination among diverse internal and external stakeholders and translating Veolia’s technical requirements to developers and contractors. Primary Duties/Responsibilities: • Manage complex coordination among diverse internal and external stakeholders., • Main point of contact for developer-funded main extensions and complicated service installations., • Translate Veolia’s technical requirements to external stakeholders - developers and contractors., • Prepare preliminary, engineering, and detailed cost estimates., • Project budget development and cost tracking and expenditure forecasting. Track and report on project expenditures to ensure they are aligned with budget and prioritize projects based on available funding and risk assessment., • Manage several projects simultaneously ranging in scope from small to very large., • Prepare bid documents and coordinate procurement with supply chain management (SCM) department., • Prepare material requisitions forms (MSRs)., • Prepare funding projects and updating asset data base for newly created assets., • Manage pipe condition assessment projects., • Provide engineering support (on and off-site) during emergencies and large main breaks and other emergencies., • Mainly manage New Business Department new extensions projects., • Communicate regularly in written form (email, memoranda, reports, status updates, etc.) and verbally (group meetings, virtual calls, internal presentations, external presentations)., • Prepare refund calculations for developer-funded water main extensions., • Track developments for annual master permit updates., • Review / approve all fire suppression calculation reports associated with any new or enlarged fire service., • Work independently to manage all capital programs and specific projects for the New Business Department. Work directly with the Operations and T&D group to understand their needs in meeting operational, compliance, and health & safety goals., • Manage the design (either internal or external) and construction of small and large New Business Engineering projects., • Provide support to the Director of Engineering & Manager of Network Engineering and the Rates Department as needed during the preparation of the rate case filling, DSIC filing as well as responding to the rate case and DSIC interrogatories., • Assist the Director of Engineering & Manager of Network Engineering in developing analysis and reports to be provided to regulators, internal or external customers as required.Qualifications Education/Experience/Background: • Bachelor’s Degree in Civil/Environmental Engineering., • Strong experience and expertise in Network Engineering utility projects and project management is required for this role., • Experience in managing Network Engineering utility projects projects., • Experience in managing and adhering to project budgets and schedules., • 6 years + of engineering experience in related field., • ESRI/GIS, PowerPlan, INFOR/Hexagon experience is a plus., • Hydraulic Modeling experience is a plus., • Possesses broad knowledge of multiple processes and/or engineering disciplines, augmented with good experience and seasoning, to the point where he/she can address complex projects or address complex challenges, such as leading a response to an emergency., • Must be able to propose capital projects, or identify other work that will benefit VEOLIA and/or its customers, based on their expertise in one or more areas., • Excellent analytical, organizational, computer and interpersonal skills., • Exercise discretion and independent judgment., • Professional Engineer (PE) License is a plus., • Project Management Professional (PMP) Certification is a plus. Additional Information Pay Range: $95000 to $105000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Under the direction of Manager of New Business, this person will develop, implement and manage capital improvement projects for transmission, distribution and treatment systems, including preliminary concept development, detailed engineering design, cost-estimations, bidding, construction supervision, start up process, as-built plans, refunds calculations, easement agreements and O&M manuals for all New Business Projects. Responsibilities will include capital project delivery from inception to completion, including preliminary conceptual development, detailed engineering design with support of external engineering consultants; construction cost estimation, procurement, construction administration, supervision and inspection, startup and commissioning, and project closeout documentation delivery, including as-built plans. The Engineer will mainly manage all New Business projects for the Hackensack/Franklin Lakes system. Incumbent will also assist with New Business projects in the Highlands systems located in Passaic and Sussex Counties, in New Jersey as needed. This position will work on both water and wastewater networks; however, the majority of projects and responsibilities are in water. The most critical and unique aspect of this role involves managing complex coordination among diverse internal and external stakeholders and translating Veolia’s technical requirements to developers and contractors. Primary Duties/Responsibilities: • Manage complex coordination among diverse internal and external stakeholders., • Main point of contact for developer-funded main extensions and complicated service installations., • Translate Veolia’s technical requirements to external stakeholders - developers and contractors., • Prepare preliminary, engineering, and detailed cost estimates., • Project budget development and cost tracking and expenditure forecasting. Track and report on project expenditures to ensure they are aligned with budget and prioritize projects based on available funding and risk assessment., • Manage several projects simultaneously ranging in scope from small to very large., • Prepare bid documents and coordinate procurement with supply chain management (SCM) department., • Prepare material requisitions forms (MSRs)., • Prepare funding projects and updating asset data base for newly created assets., • Manage pipe condition assessment projects., • Provide engineering support (on and off-site) during emergencies and large main breaks and other emergencies., • Mainly manage New Business Department new extensions projects., • Communicate regularly in written form (email, memoranda, reports, status updates, etc.) and verbally (group meetings, virtual calls, internal presentations, external presentations)., • Prepare refund calculations for developer-funded water main extensions., • Track developments for annual master permit updates., • Review / approve all fire suppression calculation reports associated with any new or enlarged fire service., • Work independently to manage all capital programs and specific projects for the New Business Department. Work directly with the Operations and T&D group to understand their needs in meeting operational, compliance, and health & safety goals., • Manage the design (either internal or external) and construction of small and large New Business Engineering projects., • Provide support to the Director of Engineering & Manager of Network Engineering and the Rates Department as needed during the preparation of the rate case filling, DSIC filing as well as responding to the rate case and DSIC interrogatories., • Assist the Director of Engineering & Manager of Network Engineering in developing analysis and reports to be provided to regulators, internal or external customers as required.Qualifications Education/Experience/Background: • Bachelor’s Degree in Civil/Environmental Engineering., • Strong experience and expertise in Network Engineering utility projects and project management is required for this role., • Experience in managing Network Engineering utility projects projects., • Experience in managing and adhering to project budgets and schedules., • ESRI/GIS, PowerPlan, INFOR/Hexagon experience is a plus., • Hydraulic Modeling experience is a plus., • Strong experience and expertise in Network Engineering utility projects and project management is required for this role., • Possesses broad knowledge of multiple processes and/or engineering disciplines, augmented with good experience and seasoning, to the point where he/she can address complex projects or address complex challenges, such as leading a response to an emergency., • Must be able to propose capital projects, or identify other work that will benefit VEOLIA and/or its customers, based on their expertise in one or more areas., • Excellent analytical, organizational, computer and interpersonal skills., • Exercise discretion and independent judgment., • Engineer in Training certificate is a must., • Project Management Professional (PMP) Certification is a plus. Additional Information Pay Range: $70000 to $80000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 5% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Under the direction of the Manager Engineering - Lead Program & Special Projects, the Associate Engineer - Lead Program will be assisting in the construction delivery for the Lead Service Line Replacement Program. This engineer will provide support to the Manager Engineering - Lead Program & Special

She/he will work closely with the Office of Medical Affairs and clinical service leadership to assist in the implementation of innovative clinical operations and quality improvement solution projects. The Clinical Informatics Engineer will also contribute to the ongoing growth and development of Hac

For More Open Positions Visit us at:.We have a strong moral code that includes the service of goodness without expectations of reward.We are motivated by the sense of responsibility and servant leadership.We are seeking an experienced DevOps Engineer to assist with the maintenance, development, and

As a Sales Engineer, you are an integral partner in the sales cycle assisting the GTM (Go-To-Market) Sales Organization by presenting both platform and service offerings to establish confidence in Rithum's technology infrastructure and to overcome all technical objections in the sales cycle. You ide

Electrical Engineer (Spectrum Engineer). Basic Qualifications: Bachelor’s degree in electrical engineering, Electronics Engineering,. Collaborates closely with other federal and contractor engineers, Service Area Spectrum Offices, and FAA program offices to resolve technical issues and advance rec

Job DescriptionSummaryOur client is a leading IT Solutions Company located in the Yonkers, NY (Manhattan, NY area) and they are in need of a Level III IT Engineer. A qualified candidate would have both proven experience with technology and outstanding personal communication skills. You should enjoy building solutions that leverage technology to meet a client’s business needs. Duties & Responsibilities • Work with sales to provide pre- and post-sales support, including tasks such as discovery meetings, site visits, proposals and presentations, technical assessments, implementation, and ongoing technical account management., • Deploying and managing Windows Servers and Active Directory, • Designing Local Area Networks, • Implementing and monitoring network security, • Optimizing and maintaining network software and hardware, • Building and deploying file servers and cloud computing solutions, • Configuring and deploying VOIP solutions, • Performing network infrastructure troubleshooting, • Manage Microsoft Exchange Server, • Telephone solutions, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response., • New User On-boardingQualifications & Requirements, • Minimum of 5 years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • Having worked in an MSP environment is a MUST., • Three years of experience in a client-facing environment such as sales engineering, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management) tool a plus, such as Kaseya or Connectwise., • Experience with a PSA (ticketing system) tool a plus, such as Autotask or Connectwise., • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plusIdeal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert), • CCNA or CCIE-Cisco certifications a real plusOur client offers challenging work, career opportunities, a pleasant work environment, and ongoing training.

Job DescriptionSummaryOur client is a leading IT Solutions Company located in the Yonkers, NY (Manhattan, NY area) and they are in need of a Level III IT Engineer. A qualified candidate would have both proven experience with technology and outstanding personal communication skills. You should enjoy building solutions that leverage technology to meet a clients business needs. Duties & Responsibilities • Workwith sales to provide pre- and post-sales support, including tasks such as discovery meetings, site visits, proposals and presentations, technical assessments, implementation, and ongoing technical account management., • Deploying and managing Windows Servers and Active Directory, • Designing Local Area Networks, • Implementing and monitoring network security, • Optimizing and maintaining network software and hardware, • Building and deploying file servers and cloud computing solutions, • Configuring and deploying VOIP solutions, • Performing network infrastructure troubleshooting, • Manage Microsoft Exchange Server, • Telephone solutions, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response., • New User On-boardingQualifications & Requirements, • Minimum of 5 years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • Having worked in an MSP environment is a MUST., • Three years of experience in a client-facing environment such as sales engineering, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management) tool a plus, such as Kaseya or Connectwise., • Experience with a PSA (ticketing system) tool a plus, such as Autotask or Connectwise., • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plus Ideal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert), • CCNA or CCIE-Cisco certifications a real plus Our client offers challenging work, career opportunities, a pleasant work environment, and ongoing training.Employment Type: Full time Location: Yonkers, NY