Trabajos shop supervisor en Clifton, New JerseyCrear alertas

Job Description Reporting to the Maintenance Supervisor or other Manager, the HVAC Mechanic “A” will lead the daily operation of the HVAC/R shop at the College. This position will be responsible for the ongoing temperature control and comfort of the heating and cooling systems at the College to support academic, lab, administrative, and specialized HVAC/R systems. POSITION SUMMARY Responsibilities include, but are not limited to: • Installs, operates, maintains, and repairs complex HVAC/R systems including water and oil pumps, water analysis and chemical treatment systems, air compressors, pneumatic, electrical and mechanical controls, refrigeration, heating, cooling and ventilating equipment, filters, condensers, cooling towers, evaporators, and heat exchangers., • Responds to HVAC system complaints, performs troubleshooting of systems and provides feedback to Supervisors and Managers on progress., • Plans and performs preventative maintenance tasks for College HVAC/R systems to optimize system performance and energy efficiency., • Installs electric power, piping, controls and duct work to replace, maintain or to install new equipment., • Maintains logs, checklists, and prepares written reports to Supervisor, as appropriate., • Enters information into the College’s Computerized Maintenance Management System (CMMS) to document all work, parts used, system conditions, hours worked, and leverages system data., • Ensures compliance with all safety standards, buildings codes, and environmental regulations., • Leverages Building Automation and Building Management Systems (BAS/BMS) to prioritize, document, and improve system performance and facility comfort., • Monitor and oversee College and contractor staff, as needed., • Attends training sessions and meetings to stay current on all trade, College, and regulatory requirements, • Maintains the cleanliness and orderliness of department spaces., • Prepares list of materials required to maintain inventory and complete projects., • Must respond to emergencies and maintenance tasks, as required, which may include working off-hours or holidays., • Reports to the College during closures and assists with snow and ice clearing operations, as needed., • Performs any other duties or task as may be assigned. SPECIAL SKILLS AND QUALIFICATIONS Education: High School diploma or equivalent required. Vocational School education or an appropriate apprenticeship preferred. Completion of a Journeyman level training program in HVAC/R or associate’s degree in HVAC/R Experience: • Minimum of Six years’ experience maintaining and repairing sophisticated commercial and industrial air conditioning systems including electric/pneumatic controls, fume hoods, high capacity centrifugal refrigeration equipment and roof top units., • Must be EPA Certified Universal Technician in accordance with Section 608 to handle CFCs, HCFCs, and HFCs, • Must have NJ Blue Seal Refrigeration, • Additional state or local licenses and certifications is a plus, • Experience working in an inclusive, collaborative, and respectful team setting., • Embodies a “culture of safety” in all tasks and recommends safety improvements. Other: Must have a valid Driver’s License. Must have or obtain a Certified Pool Operator certificate within 6 months of hire. Knowledge, Skills and Abilities: • Demonstrates knowledge of facility operations, maintenance, and industry standards., • Knowledge of power and hand tools, chemical handing procedures, and associated safety protocols., • Knowledge of computerized building automation systems and building managements systems., • Proficiency with Microsoft Office Suite and Google business suite experience preferred., • Provides excellent customer service to students, faculty, and staff., • Excellent organizational, prioritization, time management, and communication skills., • Experience with computerized maintenance management systems (CMMS) preferred., • Interprets and understands blueprints, schematics, wiring diagrams, and layouts., • Reviews projects and capital improvement scopes of work to identify opportunities for improvement., • Brazing, soldering, and industry standard pipe joining techniques. Physical requirements: • Prolonged periods walking, standing, bending, stretching, pushing, pulling, climbing ladders, or kneeling on uneven surfaces, • Physically able to operate powered equipment and tools, • Must be able to lift up to 50 pounds at a time, • Able to work in unconditioned, noisy, dimly light, confined, and odorous spaces, including the ability to work in variable and sometimes extreme weather conditions such as rain, snow, storms, heat, cold, and other weather indigenous to the area, • Must be able to wear personal protective equipment (PPE) for prolonged periods of time, • Must be able to climb a ladder and work at heights for extended periods of time Salary and Benefits • Annual Salary is $65,000-$80,000, • NJ Educator's Health Plan with Free Dental and Vision. NJ State Pension Plan., • 13 vacation days, 15 sick days, 4 personal days, 2 floating holidays, 3 Partial Sick Days, all designated holidays and 5 non-designated holidays a year. Bergen Community College provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Starbucks is seeking Baristas / Customer Service Representatives to prepare beverages, assist customers, and support daily store operations in a fast-paced coffee shop environment. Baristas are responsible for taking customer orders, operating the register, preparing coffee and espresso drinks, making cold beverages and food items, maintaining a clean work area, restocking supplies, and providing friendly customer service. Employees must follow Starbucks drink recipes, food safety guidelines, and customer service standards while working efficiently during busy periods. This position typically pays $15 to $20 per hour, and employees may also receive tips, overtime pay, holiday pay, and shift differential pay for early morning or holiday shifts. Baristas are responsible for preparing drinks to company standards, operating espresso machines, handling cash and card transactions, cleaning equipment, stocking cups and ingredients, assisting with drive-thru orders where applicable, and maintaining store cleanliness. Employees must work as part of a team to ensure orders are prepared quickly and accurately. Full-time and part-time employees may be eligible for benefits including health, dental, and vision insurance for eligible employees, 401(k) with company match, paid time off, Starbucks partner discounts, free drinks during shifts, tuition assistance programs, and opportunities for advancement into Shift Supervisor or Store Manager roles. Starbucks also offers tip sharing and potential performance-based raises.

Job Description SCENIC CARPENTER Special Event Fabrication company seeks over hire carpenters to work as needed on various projects. Secaucus, NJ based shop fully equipped. Working under the supervision of the Head of Carpentry Candidates for the Scenic Carpenter position should possess solid carpentry skills, a keen eye for detail, and the ability to interpret artistic and technical drawings. Problem-solving skills and adaptability are crucial, as the work often requires on-the-spot adjustments and creative solutions. Experience with power tools and construction techniques specific to scenic production is highly valued. Being well versed in using a wide range of equipment, carpentry power tools, skills and materials to construct and finish a variety of large- and small-scale scenic items to the highest of standards to tight timescales. ESSENTIAL – REQUIRED SKILLS · Physically capable of undertaking the requirements of the position including lifting, bending, stretching and reaching for long periods of time · Able to work at height on ladders and access platforms · Ability to read and understand CAD Drawings · Ability to read and understand Build Drawings · Ability to work from scale drawings, models, plans, sketches, verbal ideas and references · Ability to create cut lists, material needs, etc. to complete a project · Excellent practical woodwork and resistant material skills · Adhere to safety standards and proper handling of equipment and gear · Ability to organize/prioritize and complete multiple tasks simultaneously on the job · Effective time management skills and the ability to work as part of a team in a busy workshop environment GENERAL SHOP DUTIES · SUPPORT WORK-Keeping shop clean. If not currently assigned a task, cleaning and putting tools away · Accept all other duties as assigned by immediate supervisor/manager -Hourly Position with possibility of overtime when necessary \nCompany Description Founded in 1993, Kadan Productions is a full-service production company that specializes in fashion shows and events. We cater to a wide range of clients and work to create the best experience possible in the events industry. KadaN's facilities include a design/production office adjacent to a 80,000 square foot shop. Our facility is fully equipped for woodworking and cabinetry, metal working, upholstering, and scenic painting/faux finish paint treatments. Our facility also houses an extensive rental stock for your event needs. *Be sure your resume file is named with your last name and first name. *Your resume (not including a portfolio) should be TWO pages or less. More than 2 page will not be looked at. Founded in 1993, Kadan Productions is a full-service production company that specializes in fashion shows and events. We cater to a wide range of clients and work to create the best experience possible in the events industry. \r\nKadaN's facilities include a design/production office adjacent to a 80,000 square foot shop. Our facility is fully equipped for woodworking and cabinetry, metal working, upholstering, and scenic painting/faux finish paint treatments. Our facility also houses an extensive rental stock for your event needs.\r\nBe sure your resume file is named with your last name and first name.\r\nYour resume (not including a portfolio) should be TWO pages or less. More than 2 page will not be looked at.

We are recruiting an experienced CNC Swiss Machinist / CNC Shop Manager for a growing precision machining company. \n \n This is a highly hands-on shop-floor leadership position for someone who can combine CNC Swiss machining expertise with day-to-day production leadership. The successful candidate will spend the majority of the day in the shop, working directly with machines and employees—not managing operations from an office. \n \n We are particularly interested in an experienced Swiss machinist, lead machinist, shop foreman, manufacturing supervisor, or shop manager who is comfortable setting up and operating equipment, troubleshooting machining issues, and keeping a high-mix production environment moving. \n \n CNC programming capability is highly desired. \n \n What You’ll Do: \n\n • Lead day-to-day machine shop operations while remaining actively involved on the production floor\n, • Set up and operate CNC Swiss screw machines to support production requirements\n, • Review drawings, specifications, tolerances, and job requirements before production\n, • Coordinate daily production schedules, machine assignments, manpower, materials, and job priorities\n, • Support frequent setups, short production runs, custom work, rush jobs, and changing customer requirements\n, • Troubleshoot machining, tooling, setup, quality, and production issues\n, • Program or modify CNC programs when needed, depending on experience\n, • Work with tooling, speeds and feeds, workholding, and machining processes to improve performance\n, • Perform and support first-article and in-process inspection using precision measuring equipment\n, • Ensure finished components meet print, tolerance, and quality requirements\n, • Monitor machine utilization, setup and cycle times, labor efficiency, scrap, rework, and overall shop productivity\n, • Identify bottlenecks and adjust production priorities to keep work flowing\n, • Coordinate preventive maintenance and equipment repairs to minimize downtime\n, • Train, develop, and provide day-to-day direction to machinists, operators, and other shop employees\n, • Drive improvements in setup time, cycle time, quality, throughput, and overall manufacturing efficiency\n\n \n Preferred Background: \n\n • Strong hands-on experience with CNC Swiss screw machining\n, • Experience setting up and operating Swiss-style CNC equipment\n, • Ability to program CNC equipment is highly desired\n, • Experience with CAM-based and CNC Swiss machining environments\n, • Strong understanding of CNC machine tools, Swiss machining processes, tooling, workholding, feeds and speeds, and machine setup\n, • Ability to read and interpret engineering drawings, GD&T, dimensions, tolerances, and manufacturing specifications\n, • Skilled with micrometers, gauges, and other precision inspection and measuring equipment\n, • Experience troubleshooting machining problems and refining setups and processes\n, • Background in a high-mix, low-volume or job-shop manufacturing environment with frequent setups is strongly preferred\n, • Previous experience as a Lead Machinist, Shop Foreman, Manufacturing Supervisor, Production Manager, or hands-on Shop Manager is beneficial\n, • Experience scheduling and prioritizing multiple jobs across machines and production resources\n, • Understanding of estimated versus actual machining hours, production efficiency, scrap, and job costs\n, • Experience machining small-diameter precision components is valuable\n, • Plastics machining experience is preferred but not required\n, • Strong shop-floor leadership and the ability to work directly alongside the production team\n\n \n Compensation & Benefits: \n\n • $80,000–$140,000 base salary, based on experience and technical capabilities\n, • Medical benefits\n, • 401(k) with employer matching\n, • Paid time off and company holidays\n, • Discretionary bonus opportunity\n, • Full-time, stable employment\n, • Opportunity for continued professional growth\n\n \n This opportunity is particularly well suited to someone who has developed strong CNC Swiss machining skills and is ready to combine those capabilities with broader responsibility for people, production, quality, scheduling, and overall shop performance. \n \n If you are a hands-on machining professional who enjoys solving problems on the shop floor and leading by example, we would welcome the opportunity to speak with you.

Job Description The primary responsibility of the Shop Team Leader is to oversee and work with a fabrication team to execute the technical drawings to appropriate finish levels and to maintain the scheduling goals for their assigned projects. This position reports to the Director of Fabrication. Job responsibilities include but are not limited to the following: Participate in Project Kickoff meetings, daily check-in meetings, and project post-mortem meetings as required by the Director of Fabrication. Review all scope-of-work/ Finish Schedule documentation produced by Production Management pertaining to your projects. Review all project milestones calendars produced by Production Management pertaining to your projects. Manage all on-site activities for all projects as assigned by the Director of Fabrication. Review forecast calendars of projects being estimated and flag schedule holes to senior management. Identify shortcomings in project workflow and actively work with direct supervisor to optimize and improve this process. This includes identifying when OT or Layoffs are needed. Personally manage assigned projects. Maintain the electronic task list of your projects. Communicate with Senior Staff, Technical Design, and Production Management as needed. Communicate with Purchasing and Logistics to ensure/confirm orders as needed. Keep projects on schedule while maintaining an efficient crew. This includes identifying when OT or layoffs are needed and coordinating those needs with the Director of Fabrication. Review drawings and assign them to various team members. Review shop drawings to ensure that all technical requirements have been met. Review and fit up as needed, finished scenery before releasing to paint, carpentry, or to the client to ensure quality control. Review load lists and hardware packs to ensure the correct items reach the end client as needed. Go onsite as needed to install or supervise the installation of your projects. Ensure team member timesheets are correct Supervise and work with crew to ensure production deadlines are met Required basic qualifications Minimum of 5+ years of manufacturing experience including supervisory experience Ability to read technical drawings Strong understanding of scenic construction and basic automation Ability to effectively prioritize, execute, and problem solve in a high-pressure environment and work efficiently within given time constraints; highly organized Ability to communicate ideas clearly Self-motivated; team oriented and highly collaborative work style Must be legally authorized to work in the United States without company sponsorship, now or in the future. Benefits • 10 vacation days per year., • 7 Shop observed Holidays with a comp policy for holidays worked., • 100% health insurance coverage for you as the employee with the ability for you to pay to cover additional family members., • 100% vision, dental, and life insurance coverage for you as the employee with the ability for you to pay to cover additional family members., • Comp Policy for worked holidays and weeks where more than 70 hours are worked., • 401k is available to contribute to - no company match currently. \nCompany Description Provider of Theatrical and Event custom fabrication and automation solutions. Provider of Theatrical and Event custom fabrication and automation solutions.

Job DescriptionCompany Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description This position is responsible for the safety, the productivity and the quality mindset of the shop floor employees. The position is responsible for assuring their designated team is achieving productivity goals, adhering to company initiatives and culture throughout the shop floor. In this role, a candidate should expect to spend a majority of their time on the shop floor with the shop floor employees. Coaching, mentoring, training and communication are key elements of this job. • Responsible for communicating to employees, providing a link between what they do and what the business needs, • Teach lean concepts and actively engage employees to improve speed, quality and reduce cost, • Participate and champion continuous improvement events, • Coach and guide employees about proper conduct and behaviors in line with company culture, • Provide feedback and maintain documentation regarding employee behaviors (good & bad), • Ensure cell employees adhere to company policies (e.g. following operating instructions, safety protocols, etc.), • Establish and enforce policies (manufacturing, quality, safety), • Responsible for employee time and attendance, • Audit overtime usage and seek improvements to reduce as necessary, • Optimize resource allocations – manpower & equipment, • Establish and sustain a 5S culture, • Assure employees have adequate training to achieve quality and productivity requirements, • Team building, • Use problem solving and critical thinking skills to overcome manufacturing obstacles, • Encourage problem solving at the operator level, • Lead and participate in Gemba walks, • Investigate safety, quality or productivity issues, • Create and assure that KPI’s are being tracked and improvements are sought, • Manage and communicate resource exceptions (time off / coverage), • Produce parts to meet master production schedule requirements – takt time, • Responsible to expedite jobs outside of cell/shared resources, • Provide timely commitments on WIP and ensure that all commit dates are on track and met., • Responsible for WIP quantities and accuracy. Qualifications College helpful but not required Supervisor experience required MS Office, ERP systems helpful Additional Information • Leadership skills:, • Strong communication with subordinates, peers and management., • Ability to motivate others, • Ability to train and delegate other, • Effectively provide feedback to reports and peers, • Be accountable for the performance of the team’s metrics and its members’ behaviors, • Mathematical skills; calculating figures, formulas, • Organize, plan and prioritize work in a fast paced, dynamic environment, • Critical thinking, decision making, problem solving – analyze information and choose best solution, • Information gathering, • Monitoring and reviewing available data (i.e. production performance or quality data) to detect and assess problems, • Lean or six sigma training or experience, • Ability to seek out opportunities independently and offer solutions, • Must be comfortable in a manufacturing environment, • Must be able to work in an office environment, i.e., sitting for long periods of time; extensive computer work (typing), • May be required to lift up to 50 lbs., • May require some travel; i.e., car, train, plane We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job DescriptionHaddad Plumbing and Heating Inc. is seeking an Assistant Project Manager to join our project operations team based in Newark, New Jersey. The Assistant Project Manager will support the planning, coordination, and execution of mechanical construction projects. This role works closely with Project Managers, field teams, subcontractors, and senior leadership to ensure projects are delivered safely, on schedule, and in accordance with approved drawings, specifications, and quality standards. The ideal candidate will be technically proficient, detail-oriented, and proactive, with strong communication and organizational skills and the ability to thrive in a fast-paced construction environment. The Assistant Project Manager reports to the Project Manager Supervisor and plays a key role in supporting project performance, accurate documentation, and day-to-day site coordination. Responsibilities: • Coordinate daily construction activities with field staff, project manager, construction manager, estimators, consultants, subcontractors, and relevant departments using approved drawings and materials., • Support the Project Manager to ensure effective performance., • Execute work according to shop drawings, specifications, construction schedules, and method statements., • Assist the technical team with issues as directed by senior management., • Monitor work progress against construction programs and submit site reports per the project reporting plan., • Control and coordinate subcontractor activities, reporting progress and potential issues., • Maintain site management information systems and record daily activities and circumstances impacting the project., • Provide senior management with regular feedback on project status, focusing on program, quality, variations, client issues, and other relevant factors., • Review drawings for accuracy, ensure availability of sufficient information, and use only current revisions of issued-for-construction drawings, withdrawing all superseded versions from the site.Education, Qualities & Skills required:, • Mechanical engineering degree from a recognized university., • Proficient in AutoCAD and knowledgeable in plumbing and HVAC design codes., • Required to have OSHA 30 certification., • Excellent presentation, written, and verbal communication skills., • Able to prioritize, work under pressure, and meet tight deadlines., • Initiative-driven and proactive. Strong interpersonal and organizational skills., • Capable of managing sensitive and confidential information., • Effective both independentlyCompensation: $65,000 - $75,000 Annually Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and AdvancementPosition Type and Expected Hours: This is a full-time position. Days and hours of work are Monday through Friday 7:00 am – 5:00 pm. Powered by JazzHR XQfjpVHqAN

Job Description Title: Shop Technician Salary Range: $20-$24/Hour The purpose of this position is to pull and stage equipment from warehouse for outbound shows. Essential Duties/Responsibilities • Preparing/returning show equipment., • Package and label items appropriately for transportation or based on show requirements., • Work with operations to ensure proper substitutions on shortages., • Receive sub-rented items into order to ensure fulfillment., • Create Shipping manifest or carnet prior to shipping., • Responsible for pushing the equipment to various docking stations for outbound delivery., • Loading/unloading trucks., • Assist restocking delivered equipment in various locations throughout the warehouse., • Document service in inventory system and report all damaged equipment to operations., • Keep detailed records of maintenance, QC, and items entered into repair., • Perform other duties as assigned by supervisor. Position Type / Expected Hours of Work: Full time temporary, with ability to work overtime, including nights and weekends. Position Requirements: • R2 basic knowledge., • Positive Attitude and ability to work independently., • Experience in a warehouse or shop environment is a plus., • Attention to detail, ability to multitask, and meet deadlines., • Ability to lift 50 pounds on a frequent basis., • Must be able to work in a team environment., • Ability to spend long periods of work time standing or moving in a 70,000+ square foot warehouse., • Physical activities include using hand tools, bending, stooping, lifting, climbing stairs, carrying, walking and/or reaching on a frequent basis., • Certified to drive sit down and standup forklift is a plus., • Computer literacy / experience with Microsoft office is a plus., • Clean driving record.

Job DescriptionThis position will perform routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under direct supervision. Handles basic issues and problems and refers more complex issues to higher-level staff. All work is performed with a commitment to safety.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$23.00/hr based on CBAMajor Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with minimal supervision on basic maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components, • Assist Tech II or III with preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Assist in the performance of mechanical repairs including the repair of brakes, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately, • Diagnoses and performs accurately all phases of vehicle and equipment repair under direct supervision., • Evaluates completed work prior to release and seeks approval where required, • Notify supervisor of potentially dangerous equipment and corrective action taken, • Moves vehicles safely between job and work area, • Assist with road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Cleans vehicles as requested or required, • Other responsibility as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement highly preferred to perform test drives or assist with road call response (expected within 3 months of hire, exceptions can be submitted for approval by Maintenance Leadership., • ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 1 ASE within 24 months of hire) Minimum Experience or Skills Required • Basic mechanical aptitude and 0-1 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Basic problem-solving ability, • Basic computer skills, • Comfortable using hand tools, • Good customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess basic mechanic hand tools with at least enough tools to perform job requirements Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job Description CNC Machinist Shift: 1st Shift: 7:00 AM – 4:00 PM (Potential OT) Salary: $25.00 – $33.00 per hour Who we are A well-established specialty component manufacturing facility located in Newark, NJ, serving critical defense and heavy industry partners. The organization is dedicated to high-quality production, workplace safety, and continuous improvement across all operations. CNC Machinist Role The CNC Machinist sets up, operates, and monitors vertical milling machinery to manufacture high-precision components to exact customer specifications. CNC Machinist Responsibilities • Set up and operate CNC vertical milling machines to produce precision components, • Perform equipment pre-operation checks to ensure proper setup, startup, and continuous running, • Monitor multi-equipment operations during production runs to minimize downtime and maintain quality standards, • Select appropriate speeds, feeds, and tooling based on material and part specifications, • Inspect finished parts using precision tools to ensure exact alignment with blueprint specifications, • Perform basic troubleshooting and adjust machine parameters as needed during operation, • Maintain clear communication with team members and support teams to maximize production efficiency, • Rotate across different departmental work centers as required CNC Machinist Reporting Relationships Reports directly to the Machine Shop Supervisor with no direct reports About You • Possess at least five years of manufacturing or precision machining experience, • Demonstrate proficiency setting up and operating CNC vertical mills, • Read and interpret engineering blueprints, schematics, and technical manuals, • Program and edit machine functions using G&M code, • Utilize precision measuring instruments including micrometers, calipers, and gauges, • Operate material handling equipment safely within a production facility, • Demonstrate English communication skills to read, write, and count inventory accurately, • Lift up to 40 lbs and work effectively in an active shop environment Next Steps If detail-oriented and quality-focused describes you, we would like to hear from you. Additional Information • Physical Demands & Working Conditions: Position requires standing for long periods, bending, reaching, and lifting up to 40 lbs. Operates in a manufacturing environment near active machinery., • Equal Opportunity Employer: All qualified applicants receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. #INDRBR2

Job Description This is a rare chance to join our client, a globally recognized aerospace manufacturer that has spent 75+ years pushing the boundaries of turbine engine technology. Consistently ranked among the world's best employers, this publicly traded organization backs that reputation with a culture that genuinely prioritizes its people. What's in it for you? • Stability and momentum — a growing public company with deep industry leadership, • Benefits that start on day one: premium health coverage and a 9% 401(k) match — one of the strongest in the industry, • Employer-funded retirement savings contribution each pay period, • A workplace culture built around collaboration, inclusion, and continuous improvement, • Structured development programs to help you grow into your next role, • On-site fitness center access at participating locations Job Summary: The selected candidate will report to the Plant Manager and provide managerial and leadership support to the Procurement and Supply Chain Team to ensure Business Unit goals are met through the execution of procurement strategies. Procurement strategies include, but are not limited to, securing supply, cost savings, process optimization, and supplier risk mitigation. The overall goal is to support the production schedule while obtaining the best achievable value for supplies and services while maintaining compliance with company procedures. Environmental Health & Safety Responsibilities: • Expected to assist in the implementation of the company's EHS value and policy statement and its accompanying principles., • Comply with all department, facility, corporate, and regulatory EHS regulations., • Wear all required personal protective equipment., • Report all job-related illnesses and injuries (per employee handbook)., • Report all Safety, Health & Environmental concerns to your supervisor promptly., • Attend all EHS training. Responsibilities: • Directly responsible for the overall Plant procurement operations, which includes direct, indirect, and Capital spend., • Provide guidance and leadership to Plant Procurement Specialists and Supply Chain Planners., • Collaborate with the value stream (Operations, Maintenance, Engineering, Quality, Finance, etc.) to ensure procurement strategies align with Plant and BU goals., • Share savings targets of plant-specific spend with Location Management, Category Management, and stakeholders., • Manage supplier sourcing, negotiations, contracting, and the execution of agreements to support plant requirements., • Monitor supplier performance and place countermeasures to resolve any issues that may arise., • Communicate supplier issues to BU Procurement, Category Management, and Quality., • Review Plant Procurement metrics and take the necessary actions to ensure Plant and BU targets are met., • Responsible to ensure Procurement retains compliance with all auditing agencies., • Ensure the successful execution of ERP-related procurement processes including system enhancement implementations., • Responsible for Raw Material forecasting, inventory management, cost management, and researching potential BOM issues affecting inventory accuracy., • Oversee ERP item and raw material transactional activity to drive inventory accuracy — including accurate cycle count program monitoring and maintenance for raw materials., • Manage project-related teams and plant procurement and supply chain initiatives., • Ability to be flexible and manage competing priorities well; understand how to balance various deadlines and tensions both within the business and between the business and its partners. Qualifications BASIC QUALIFICATIONS: • Bachelor's degree from an accredited institution in Business, Management, Supply Chain, Logistics, IT, Politics, Policy, Finance, Accounting, Data Science/Analytics, Marketing/Communication, Economics, Mathematics, or Engineering., • Minimum 6 years' experience in Procurement or Supply Chain., • Knowledge and understanding of procurement and financial best practices and compliance (Sarbanes-Oxley, UCC Laws, Import/Export Laws, etc.)., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items. PREFERRED QUALIFICATIONS: • Procurement experience working in a fast-paced manufacturing environment., • Ability to write and negotiate complex contracts for the obtaining of goods and services., • Experience in Oracle or a similar type of Enterprise Business System., • Willingness to frequently visit the shop floor for a better understanding of Plant operations., • Customer-oriented personality., • Integrity and operates with utmost ethics; trustworthy; advocates for and complies with laws and audit functions; reports accurately; abides by agreed terms and conditions. About Augmentis Augmentis is a specialized recruiting firm focused on accounting, finance, procurement, and engineering talent across the U.S. We partner with growthoriented companies to match highimpact professionals with meaningful roles. To learn more about Augmentis, visit our website: www.augment-is.com Representation/employer clarification: Augmentis is conducting this search on behalf of our client. The selected candidate will be employed directly by our client, not by Augmentis. EEO + disclaimer Our client and Augmentis are Equal Opportunity Employers. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. This job posting does not constitute a contract or guarantee of employment, and role details are subject to change based on our clients' needs. By applying, you acknowledge that your information may be shared with our client for recruitment and hiring. Text Message Consent & Privacy As part of your application, you'll have the option to receive text updates about your status, screening, and scheduling. This is optional; it is not required to apply. See our Privacy Policy and SMS Terms & Conditions for details on how your information is used and protected.

Job Description Perform lathe setups and be responsible for part quality/dimensions. Perform typical machine shop operations to support the production dept. Detect and report defective materials or questionable conditions to the department supervisor. Maintain the work area and equipment in a clean orderly condition and follow prescribed safety regulations. Must be able to perform but not limited to the following tasks: milling, turning, drilling, taping, de-burring, molding and all bench operations and inspections. Must be familiar with the basic machine functions. Must be willing to accept and receive frequent supervision and assistance with regard to machine set-up. Requirement: High School Graduate/GED. Knowledge of standard machine shop equipment and processes. Rate: $25 - 30 per hr. Benefits: Medical, Dental, Vision, Life, 401k w/Match, FSA, Bonus, PTO

Job Description About Flech Paper Products Flech Paper Products is a growing paper manufacturing and converting company producing matboards, display products, and paper-based components used in custom framing, printing, packaging, and retail display industries. We combine traditional craftsmanship with modern manufacturing equipment to deliver high-quality, precision-cut products to customers across the United States. We are expanding our production capacity and are looking for a hands-on Operations Supervisor to help lead our production floor and ensure smooth daily manufacturing operations. Position Overview The Operations Supervisor will oversee daily productions floor activity, production workflow, and order execution. This is a hands-on manufacturing leadership role with 80% on the production floor managing output, inventory and workorders with the other 20% of time management meetings and planning. You will work directly with production employees, machinery, and incoming orders to make sure work is completed accurately, on time, and safely. You will also work directly with management for planning purposes. We are looking for someone from a trade or manufacturing background who understands how production really works: machines break, materials run out, and schedules change. The right person can solve problems quickly and keep operations moving. The right person is a bridge between management and day to day production. Responsibilities Production & Floor Management • Supervise daily manufacturing operations and production floor workflow, • Assign work to production staff and monitor productivity, • Coordinate production schedules and priorities, • Ensure orders are completed accurately and shipped on time, • Maintain a clean, organized, and safe production environment, • Assist with hiring, training, and coaching production employees Order Tracking & Workflow • Track active jobs from order intake through completion, • Communicate production status internally, • Identify bottlenecks and improve workflow efficiency, • Verify work orders, specifications, and quantities before production, • Coordinate rush orders and production adjustments Inventory Management • Monitor raw material inventory., • Maintain reorder levels and notify purchasing when supplies run low, • Perform cycle counts and periodic inventory checks, • Reduce waste and material loss, • Organize storage areas for efficient material handling Machinery Oversight & Troubleshooting Operate and oversee the following equipment: • Gunnar computerized mat cutters, • Guillotine cutters, • Laminators and other sheeting equipment Responsibilities include: • Basic troubleshooting and machine adjustments, • Identifying mechanical or operational issues early, • Performing routine maintenance checks, • Coordinating service and repairs when necessary, • Training staff on proper machine operation and safety Required Qualifications • 3+ years experience in manufacturing, print shop, converting, framing, laminating, metal shop, packaging, or similar production environment, • Experience supervising or leading shop floor employees, • Strong mechanical aptitude, • Experience tracking jobs or work orders, • Familiarity with inventory control, • Comfortable working in a hands-on production environment Preferred Backgrounds Ideal candidates may come from: • Production leads or finishing department, • Framing production facility, • Packaging manufacturing, • Sign shop / display manufacturing, • Machine shop or fabrication shop, • Construction or skilled trade, • Converting or paper manufacturing Personal Qualities We’re Looking For • Fast learner and adaptable, • Problem solver (fix issues instead of waiting for instructions), • Organized and detail-oriented, • Reliable and punctual, • Comfortable working on their feet most of the day, • Willing to take ownership of the production floor and buys into our brand and products we manufacture, • Strong communicator with production staff and management, • Committed to working 5 days per week on-site in a manufacturing environment Work Schedule Full-time, in person — 5 days per weekMonday – FridayMonday – Thursday 7:15am to 4:00pm; Friday 7:30am to 3:00pm. (45 minutes break paid daily break 1: 10:00am – 10:15am; break 2: 12:00pm – 12:30pm) Compensation & Benefits • Competitive salary (based on experience) plus year end bonus commiserate with performance., • Growth opportunity into Operations Manager role within a year or two., • Stable, year-round manufacturing work as we are growing., • Opportunity to help build and improve a growing production operation Why This Role Matters This position is critical to our company. The Operations Supervisor is the person who ensures orders move, machines run, and production happens. You will play a direct role in scaling our manufacturing output and improving operational efficiency.

Job Description This is a rare chance to join our client, a globally recognized aerospace manufacturer that has spent 75+ years pushing the boundaries of turbine engine technology. Consistently ranked among the world's best employers, this publicly traded organization backs that reputation with a culture that genuinely prioritizes its people. What's in it for you? • Stability and momentum — a growing public company with deep industry leadership, • Benefits that start on day one: premium health coverage and a 9% 401(k) match — one of the strongest in the industry, • Employer-funded retirement savings contribution each pay period, • A workplace culture built around collaboration, inclusion, and continuous improvement, • Structured development programs to help you grow into your next role, • On-site fitness center access at participating locations Job Summary: The selected candidate will report to the Plant Manager and provide managerial and leadership support to the Procurement and Supply Chain Team to ensure Business Unit goals are met through the execution of procurement strategies. Procurement strategies include, but are not limited to, securing supply, cost savings, process optimization, and supplier risk mitigation. The overall goal is to support the production schedule while obtaining the best achievable value for supplies and services while maintaining compliance with company procedures. Environmental Health & Safety Responsibilities: • Expected to assist in the implementation of the company's EHS value and policy statement and its accompanying principles., • Comply with all department, facility, corporate, and regulatory EHS regulations., • Wear all required personal protective equipment., • Report all job-related illnesses and injuries (per employee handbook)., • Report all Safety, Health & Environmental concerns to your supervisor promptly., • Attend all EHS training. Responsibilities: • Directly responsible for the overall Plant procurement operations, which includes direct, indirect, and Capital spend., • Provide guidance and leadership to Plant Procurement Specialists and Supply Chain Planners., • Collaborate with the value stream (Operations, Maintenance, Engineering, Quality, Finance, etc.) to ensure procurement strategies align with Plant and BU goals., • Share savings targets of plant-specific spend with Location Management, Category Management, and stakeholders., • Manage supplier sourcing, negotiations, contracting, and the execution of agreements to support plant requirements., • Monitor supplier performance and place countermeasures to resolve any issues that may arise., • Communicate supplier issues to BU Procurement, Category Management, and Quality., • Review Plant Procurement metrics and take the necessary actions to ensure Plant and BU targets are met., • Responsible to ensure Procurement retains compliance with all auditing agencies., • Ensure the successful execution of ERP-related procurement processes including system enhancement implementations., • Responsible for Raw Material forecasting, inventory management, cost management, and researching potential BOM issues affecting inventory accuracy., • Oversee ERP item and raw material transactional activity to drive inventory accuracy — including accurate cycle count program monitoring and maintenance for raw materials., • Manage project-related teams and plant procurement and supply chain initiatives., • Ability to be flexible and manage competing priorities well; understand how to balance various deadlines and tensions both within the business and between the business and its partners. Qualifications BASIC QUALIFICATIONS: • Bachelor's degree from an accredited institution in Business, Management, Supply Chain, Logistics, IT, Politics, Policy, Finance, Accounting, Data Science/Analytics, Marketing/Communication, Economics, Mathematics, or Engineering., • Minimum 6 years' experience in Procurement or Supply Chain., • Knowledge and understanding of procurement and financial best practices and compliance (Sarbanes-Oxley, UCC Laws, Import/Export Laws, etc.)., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items. PREFERRED QUALIFICATIONS: • Procurement experience working in a fast-paced manufacturing environment., • Ability to write and negotiate complex contracts for the obtaining of goods and services., • Experience in Oracle or a similar type of Enterprise Business System., • Willingness to frequently visit the shop floor for a better understanding of Plant operations., • Customer-oriented personality., • Integrity and operates with utmost ethics; trustworthy; advocates for and complies with laws and audit functions; reports accurately; abides by agreed terms and conditions. About Augmentis Augmentis is a specialized recruiting firm focused on accounting, finance, procurement, and engineering talent across the U.S. We partner with growthoriented companies to match highimpact professionals with meaningful roles. To learn more about Augmentis, visit our website: www.augment-is.com Representation/employer clarification: Augmentis is conducting this search on behalf of our client. The selected candidate will be employed directly by our client, not by Augmentis. EEO + disclaimer Our client and Augmentis are Equal Opportunity Employers. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. This job posting does not constitute a contract or guarantee of employment, and role details are subject to change based on our clients' needs. By applying, you acknowledge that your information may be shared with our client for recruitment and hiring. Text Message Consent & Privacy As part of your application, you'll have the option to receive text updates about your status, screening, and scheduling. This is optional; it is not required to apply. See our Privacy Policy and SMS Terms & Conditions for details on how your information is used and protected.

Job DescriptionForeman Organization: Hayes Pump, Inc. Location: Fairfield, NJ FLSA Status: Non-Exempt Pay Range: $40.00 - $50.00 per hour Position Summary Hayes Pump, the largest industrial, commercial, and municipal pump distributor in the Northeast, is seeking a Foreman to lead our growing New Jersey service operation. This position combines technical pump expertise with leadership responsibilities, overseeing daily service operations, coordinating technician schedules, supporting customers, and ensuring high-quality repair and maintenance services. The ideal candidate is an experienced pump mechanic who is ready to take the next step into leadership while remaining actively involved in service operations and technical problem-solving. Benefits Competitive hourly pay Overtime opportunities Company vehicle (if applicable) Factory and manufacturer training Career advancement opportunities Team-oriented work environment Industry-leading products and technical support Comprehensive benefits package Key Responsibilities Supervise and support service technicians and shop personnel. Coordinate daily schedules, work assignments, and service priorities. Serve as the primary technical resource for pump repair and troubleshooting activities. Oversee shop operations and field service activities to ensure quality, efficiency, and safety. Assist with recruiting, interviewing, onboarding, and developing service team members. Participate in hiring decisions and support department growth initiatives. Prepare service packages, work orders, and documentation using company systems and CRM tools. Communicate with customers regarding service needs, repair recommendations, and project updates. Support field service technicians with technical guidance and troubleshooting assistance. Monitor workflow, productivity, and service quality standards. Participate in hands-on repair, maintenance, and rebuild activities as needed. Promote a culture of safety, accountability, and continuous improvement. Ensure all work is completed in accordance with company policies and customer expectations. Required Qualifications Minimum 5 years of pump repair and service experience. Strong knowledge of centrifugal, split-case, and end suction pumps. Proven ability to diagnose and troubleshoot complex pump systems. Experience coordinating work schedules and service activities. Strong customer service and communication skills. Ability to lead, mentor, and support technicians. Experience working independently and making sound operational decisions. Proficiency with computers, service documentation, and CRM systems. Valid driver's license with an acceptable driving record. Ability to obtain a DOT Medical Card. Preferred Qualifications Previous experience as a Lead Technician, Foreman, Supervisor, or Service Manager. Experience working with municipal, industrial, and commercial pumping systems. Experience managing technicians, schedules, and customer expectations. Knowledge of pump manufacturers including Goulds, Xylem, Gorman-Rupp, Fairbanks Morse, Grundfos, Viking, Aurora, or similar products. Knowledge of electrical controls and motor troubleshooting. OSHA 10 certification. Technical or trade school education in a mechanical field. Team Structure Initially supervises approximately 3 employees. Will oversee two newly hired Service Repair Mechanics. Expected to manage 4–5 employees as the department continues to grow. May assist in overseeing future assembly and service operations as responsibilities expand. Schedule & Travel Typical schedule: 7:00 AM – 3:30 PM. Based in Fairfield, NJ. Travel to customer locations and field sites as needed. Travel may increase as service operations continue to expand. Overnight travel may occasionally be required. Travel time is compensated in accordance with company policies. What Makes Someone Successful Successful Foremen are: Highly skilled pump mechanics who lead by example. Strong communicators who build trust with employees and customers. Organized professionals who can effectively balance technical work, scheduling, and leadership responsibilities. Customer-focused and responsive to service needs. Comfortable making decisions and solving problems independently. Committed to safety, quality workmanship, and continuous improvement. Why Join Hayes Pump? Hayes Pump is the Northeast's largest industrial, commercial, and municipal pump distributor. Joining our team means becoming part of an organization known for technical expertise, exceptional customer service, and long-term employee growth. This is an excellent opportunity for an experienced technician looking to advance into a leadership role and help shape the future of a growing service operation.

Job DescriptionJoin Our Team as a Cashier at Tous Les Jours in Ridgefield, NJ! Are you looking for a friendly and welcoming workplace where you can grow and thrive? Tous Les Jours, a beloved bakery in Ridgefield, NJ, is searching for an enthusiastic and dependable Cashier to join our team. If you enjoy working in a fast-paced environment and providing exceptional service, this could be the perfect opportunity for you! What You’ll Do As a Cashier at Tous Les Jours, you’ll play a vital role in creating a positive experience for our customers. Your responsibilities will include: • Prepare and serve a variety of coffee and tea beverages according to established recipes and customer preferences., • Operate the Point of Sale (POS) system efficiently to process transactions accurately., • Maintain food safety and hygiene standards in accordance with health regulations., • Handle food preparation tasks and willing to do simple cake decoration when needed., • Ensure all equipment and stations are regularly cleaned, well-maintained, and in good working condition., • Manage time effectively to ensure timely service during peak hours., • Provide excellent customer service by interacting with customers, taking orders, and answering any questions or concerns., • Assist with inventory management by monitoring stock levels of coffee beans, pastries, and other supplies., • Collaborate with team members to create a positive work environment and enhance the customer experience. What We’re Looking For We’re excited to work with individuals who bring energy and enthusiasm to the table. Here’s what we’re seeking: • Strong time management skills to efficiently handle multiple tasks during busy periods., • Basic math skills for accurate cash handling and order processing., • Ability to work well under pressure while maintaining attention to detail., • Excellent communication skills with a friendly attitude towards customers and colleagues. Working Hours & Schedule Availability: 4-5 days per week. Weekly Volume: Approximately 30 hours per week (initial phase). Weekend/Holiday Commitment: * Must be available to work on Public Holidays. Must work at least one day every weekend (Saturday or Sunday). Training & Probation period Probation: 2 days of introductory training with no pay (3-4 hours per day). On-the-Job Training: A 1-week intensive training period alongside a supervisor. (This may extend to 10 days if additional training is required) Transition: Candidate must demonstrate the ability to manage the shop independently. Compensation Structure Training Rate: $7.96 per hour (50% of minimum wage) during the on-the-job training period. Standard Rate: $15.92 per hour (Minimum Wage) once the candidate is qualified to manage the shift alone. Candidate Strengths Reliable, punctual, and disciplined. Quick learner with meticulous attention to detail (especially for cake decorating) Strong communication skills and a customer-oriented attitude. Why Join Us? At Tous Les Jours, we pride ourselves on fostering a warm and inclusive environment where every team member feels valued. We believe in creating a workplace where you can enjoy your work and connect with a supportive team. Ready to Apply? If this sounds like the opportunity you’ve been waiting for, we’d love to hear from you! Join our team at Tous Les Jours in Ridgefield, NJ, and help us continue to delight our customers with exceptional service and delicious baked goods. Apply today and take the first step toward a rewarding role! By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

Job Description Synagro partners with stakeholders to clean our water, protect our environment and serve our communities by generating worth from what others consider waste. We work to protect the health of our water, our Earth and those who depend on them now and in the future. • The employee will be eligible for company-paid benefits, including competitive pay comprehensive health benefits. JOB SUMMARY General Labor duties include truck scaling, site cleaning, light maintenance, able to operate front end loader. Adhere to all applicable regulations to provide safe, reliable, and cost-effective operation of the site to meet processing (contact), permit, and other applicable requirements. ESSENTIAL JOB FUNCTIONS/RESPONSIBILITIES 1. Perform equipment maintenance according to abilities, as required to keep the process running. Contact the on-call mechanic when necessary, 2. Assist with the processing of material in a safe, effective timely manner for hauling to appropriate location and in compliance with all company, federal, state and local regulation/policies, 3. Communicate and inform supervisor of all major problems, or if for any reason the process is shut down for more than 1 hour, 4. Prepare and complete equipment checks at the start of every shift and complete all necessary forms, 5. Perform any general work or other assignments necessary to ensure the safe, clean, and efficient operation of the site to include sweeping, shoveling, and other housekeeping activities, 6. Enforce and maintain standard safety procedures and maintain a clean work area at all times, 7. Participate and complete training programs within the time frame allotted KNOWLEDGE/SKILLS/ABILITIES 1. Ability to establish and maintain effective working relationships with employees, other agencies and the public, 2. Communication skills – verbal and written, 3. Ability to perform basic math, 4. Ability to work varying shifts, overtime hours and/or weekend duties, 5. Ability to follow instructions, 6. Thorough knowledge and understanding of occupational hazards connected with machine shop and general site practices with emphasis on the necessity of safety policy compliance, 7. Ability to receive, comprehend and utilize required training from OSHA and Company including but not limited to the following: First aid and CPR, Hazcom, Hearing conservation, Confined space entry and rescue , Lock out/Tag out EDUCATION/EXPERIENCES 1. Minimum High School Diploma or equivalent (GED) with strong mechanical aptitude required WORKING CONDITIONS/PHYSICAL REQUIREMENTS 1. Talking, Hearing, Seeing, Walking, Sitting, Standing, Pushing, Pulling, and Lifting up to 100 lbs, 2. The worker is subject to both environmental conditions: Activities occur inside and out, 3. The worker is subject to noise: There is sufficient noise to cause worker to shout in order to be heard above the ambient noise level., 4. The worker is subject to hazards: Includes a variety of physical conditions such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to bio-solids. Starting Salary: $18.79 per hour The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. They are not intended to be an exhaustive list of all essential job functions, knowledge, skills, abilities, efforts, and physical or working conditions associated with a position. AA/EOE/M/F/D/V We thank all individuals for their interest in Synagro however only those selected for interviews will be contacted.

Job Description This job post is collecting resumes for manufacturing shop clerks in our Garfield, NJ warehouse. It does not necessarily mean we currently have an opening. Once you apply your application will be saved in our database for future openings. Positions on the manufacturing shop floor include assemblers, engravers, laminators, screen press operators, packaging and floaters. SOME ESSENTIAL DUTIES AND RESPONSIBILITIES OF EACH ROLE ARE: ASSEMBLER • Review products for quality control and to ensure they meet expectations, • Disassemble, modify, and reassemble products, • Examine connections for correct fit of parts and subassemblies, • Maintain a safe and clean environment, comply with safety regulations, • Troubleshoot malfunctions, alert supervisors if repairs are needed, • Maintain inventory, expedite supply orders when inventory levels are low, • Minimize waste by conserving materials and resources ENGRAVER • Monitor equipment operation to ensure that products are not flawed., • Set equipment controls to meet cutting specifications., • Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools., • Mount materials or workpieces onto production equipment., • Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving., • Clean workpieces or finished products., • Insert cutting tools or bits into machines and secure them LAMINATOR • Receive production orders and job assignments from supervisor, • Verify the materials supplied for production are correct to produce job., • Set up press by hanging the proper roll of film, setting up feeder and delivery and setting the correct timing and tension required., • Pull proof sheets to confirm material position, adhesion and appearance and secure an approval prior to the production run., • Complete job maintaining optimum production rate while maintaining all quality standards according to customer specifications or company guidelines monitoring for defects SCREEN PRESS OPERATOR • Inspect printed material to ensure the correctness in all areas of color, registration, stock, and all other customer specifications., • Adjust and maintain registration, color, perforations, and other customer specific printing specifications, • Conduct a visual inspection prior to printing of all material stock and ink for defects or noncompliance with job specifications., • Carry out the final inspection to ensure the material, ink, plates or screens, cylinder/rollers, tension, and all other necessary customer specifications are correct prior to the start of the running the job., • Adjusts all press machine parts and equipment: feeders, grippers, guides, feed wheels, cameras, and other machines parts, using proper equipment. PACKAGING • Scan product bar codes into computer system and sure the correct product items are as described per order., • Ensure quality control of orders and that they are packaged properly for outgoing shipping including the correct quantity, weight, and item numbers/custom., • Sort and count products before packaging., • Operate assembly machines such as product sealing and laminating machines., • Gather and obtain finished products throughout the warehouse from assemblers, engravers, laminators, screen press operators, and digital printing teams to then package for shipping., • Load products onto rolling cards and send them to the shipping team. EXPERIENCE AND QUALIFICATIONS • High school diploma/GED, • 1-2 years of experience or specialized training in general assembly preferred, • Ability to read, write, and understand English, • Ability to stand for long periods of time, • Ability to lift up to 50 pounds, • Ability to bend, reach, and stoop, • Skilled in operating hand and power tools preferred, • Strong attention to detail, may work on assignments that are routine in nature, • Respectfully take direction from supervisors, overall positive attitude, • Follow standard practices and procedures when directed

Job DescriptionJoin Alpha MX Support! Alpha MX Support is proud to be NY/NJ’s premier business aviation support team. With offices at Teterboro and Morristown Airports our technicians and Mobile Repair Units travel to any of the area airports to support private jet operations of all kinds. We pride ourselves on our professionalism, exceptional communication, and drive to fix things right the first time. If you are the kind of A&P who thrives on problem solving, important time critical repairs, and wants to lead a team of passionate mechanics please join our team! Overview: Alpha is searching for an experienced shift lead that can manage a team of 3-6 mechanics on a 3/4 day per week shift schedule. Alpha AOG technicians work a variety of fleet types in a variety of locations. Most of our work is performed in teams with crews taking a fully stocked mobile repair unit to a job and working it through to completion. Once on site, mechanics communicate with our customers maintenance controllers, troubleshoot, and repair the issue. We work on everything from simple service checks and departure supports to complex discrepancies and detailed inspections. Most of our work is performed out of TEB/MMU/HPN but we do travel to other airports withing a 75 mile radius on regular occasion. Responsibilities: • Manage, train, and schedule the mechanics on your shift., • Troubleshoot technical discrepancies and execute repair of company aircraft, • Accomplish aircraft inspections per aircraft maintenance manual, • Inspect and assist in maintenance of company equipment and tooling, • Work as a member of a team to complete repairs, • Follow safety measures, good shop practices and cleanliness standards, • Communicate discrepancies to Maintenance Control department found during inspections and follow directions to troubleshoot and repair faulty conditions, • Ensure that all aircraft documentation is completed accurately per company and FAA procedures prior to aircraft departure, • Organize daily tasks and coordinate inspections/repair of aircraft, • Coordinate materials and tooling requirements for projected work for entire shift, • Additional duties assignedQualifications:, • High School Diploma or equivalent, • Valid Federal Aviation Administration (FAA) Airframe and Powerplant Certificate, • Must be able to pass FAA drug test, • Must be able to pass background check, • Previous leadership experienceSkills:, • Must be able to read, write, fluently speak and understand the English language, • Strong analytical, interpersonal, verbal and written communication skills, • Working knowledge of Microsoft software and in use of digital manuals, • Ability to read and interpret blueprints, drawings, schematics and technical orders, • Proficient in use of electronic test equipment, voltage or amperage measuring, recording devices and navigation troubleshooting equipment, • Strong work ethic and organizational skills, • Must be able to work in variable weather conditions, • Ability to lift parts and equipment, • Able to work rotating schedules to include weekends, nights and holidays Schedule: · Your schedule will alternate weekly between Sunday through Wednesday and Sunday through Tuesday split shifts. (4 on, 3 off, 3 on, 4 off). · Technicians are “on call” without fixed hours. Compensation: · Pay will be commensurate with experience ranging from $60 per hour to $70 per hour. ($120-$150K per year) · Leads will be eligible for monthly performance bonuses based on company productivity. ($5-$10K per year) · All technicians will be compensated for a minimum of 80 hours per pay period (every 2 weeks) regardless of hours worked with overtime paid at 1.5X your hourly rate. Benefits: · Company sponsored healthcare, dental, and vision will be provided · 401(k) match of 4% of your annual salary · Paid time off o Techs will be granted 80 hours (10 days) of PTO per year. o On their second anniversary, PTO accrual will increase to 96 hours per year (12 days). o On their third work anniversary, PTO accrual will increase to 128 hours per year (16 days) o Up to 40 hours of PTO can be rolled over to following years. o Shift trading is permitted with supervisor approval.

Job Description A Retail Store Manager, or Shop Manager, is responsible for facilitating and supervising daily operations at a store to make sure that employees work together effectively to make sales and contribute to shop upkeep. Their duties include communicating with vendors about inventory orders, scheduling employee shifts and training new employees.Retail Store Manager duties and responsibilities A Retail Store Manager is responsible for managing a retail store, which includes overseeing sales, staff and inventory. Retail Store Managers have the following duties and responsibilities: • Supervise, train and assist employees like Sales Representatives and Retail Store Clerks in customer service, store maintenance and product promotions., • Develop and maintain a schedule for employees and promotions centered on holiday sales and other cycles., • Seek ways to better promote the store, the product line and service within the store., • Maintain proper inventory levels, ensure stocking, implement purchasing plans and maintain contact with suppliers to ensure maximum efficiency in meeting sales goals., • Implement cross-training of employees and Assistant Managers to maintain productivity at all times., • Manage all controllable costs with a view to maintaining profitability., • Ensure the store remains clean and presentable at all times., • Hire and train as needed to ensure adequate personnel is on hand to provide outstanding customer service. Required Qualifications: • 3+ years of demonstrated consistent retail sales/customer service experience (fashion/apparel retail experience preferred), • Experience in a Store Manager, or a Team Supervisor role, • Excellent leadership skills and the ability to work with teams, • Open availability (Opening and/or closing shifts, weekends, Holiday seasons), • Good communication and interpersonal skills towards customers, staff members, Company Leadership, Human Resources & Area/Zone managers, • Excellent problem-solving capabilities, with the ability to work well under pressure, • Must have a reliable mode of transportation upon first date of employment to complete trips to the Bank to submit deposits, • Great attention to detail for purposes of erecting attractive marketing displays, arranging merchandise and maintaining store appearance, • Ability to lift heavy merchandise, walk and stand for long hours

Job DescriptionPackaging Maintenance Technician- 1st shift Job Type: Full-Time Industry: Manufacturing / Packaging Experience: 3–5+ Years 7 am – 3:30 pm Job Summary Our client is seeking an experienced Packaging Maintenance Technician to support their manufacturing operations. This is a hands-on role focused on maintaining, troubleshooting, and repairing packaging equipment in a fast-paced production environment. The ideal candidate has strong mechanical and electrical troubleshooting skills, experience with industrial or packaging machinery, and a strong commitment to safety and quality. Responsibilities • Perform preventive, routine, and corrective maintenance on packaging equipment., • Troubleshoot and repair mechanical and electrical equipment., • Perform equipment changeovers with assistance., • Minimize production downtime through effective troubleshooting and maintenance., • Inspect equipment and identify potential mechanical and safety issues., • Follow cGMP, safety, housekeeping, and environmental requirements., • Follow proper Lockout/Tagout (LOTO) procedures., • Read and interpret mechanical diagrams, gauges, and technical documentation., • Use maintenance tools and machine-shop equipment as required., • Maintain high standards of workmanship and equipment reliability., • Report equipment breakdowns and safety hazards to the appropriate supervisor., • Perform other duties as assigned.Qualifications, • High school diploma or GED required., • 3–5+ years of experience maintaining packaging, manufacturing, or industrial equipment., • Strong mechanical and electrical troubleshooting skills., • Good mechanical aptitude and problem-solving abilities., • Experience with preventive maintenance., • Knowledge of LOTO and industrial safety practices., • Ability to read mechanical diagrams and technical documentation., • Technical school certification or training preferred., • cGMP/regulatory manufacturing experience is a plus.Physical Requirements, • Ability to stand and walk for up to 8 hours per shift., • Ability to bend, kneel, stoop, crouch, crawl, and climb., • Ability to frequently lift or move 50+ lbs., • Comfortable working around moving machinery and vibration., • Ability to wear required PPE, including face masks in designated areas.Training New hires will receive a three-month orientation/training period to become proficient in the position. Progress will be evaluated by the designated manager or trainer. Apply Today If you have experience as an Industrial Maintenance Technician, Maintenance Mechanic, Packaging Technician, Equipment Technician, or Manufacturing Maintenance Technician, we encourage you to apply. Submit your updated resume today. Qualified candidates will be contacted by our recruiting team to discuss the position and next steps.

Position Summary \n The Manual Machinist performs unusual, specialty and highly diversified machinists work of irregular shapes and alloys such as stainless steel. Will be responsible for machining, light finishing, and miscellaneous work assignments and duties as assigned using knowledge of commonly used machining concepts, practices, and procedures. Must know how to use hand tools. \n Principle Responsibilities \n\n • Knowledge, set up and operation of manual machinery including, but not limited to, milling machines, lathes, drill press, gun drill, surface grinder, all types of hand tools, and miscellaneous presses in accordance with engineering drawing specifications. \n, • Reworks parts as per print, with written and verbal instructions.\n, • Maintains production by completing scheduled work on-time as per the schedule.\n, • Inspects components, subassemblies, and final assemblies to ensure proper form, fit, and function in addition to meeting all dimensional criteria.\n, • Completes all documentation including routings, and inspection reports as required. \n, • Documents time entry into computer and ensure all work in process is properly identified and shop floor packets are kept current.\n, • Maintains inventory of material and hardware \n, • Assist maintenance with repair of machine parts \n, • Work directly with engineering to develop fixtures for production and process sheets for tooling\n, • Assists in other areas of the production department when needed.\n, • Reacts to situations that occur during the assembly process to ensure on-time delivery.\n, • Maintains a clean, safe, well-organized work area at all times\n, • Performs other duties or special projects as required or as assigned by supervisor. \n\n Qualification Requirements \n Credentials/Experience: \n\n • High school diploma or equivalent\n\n Experience/Educational/Training Preferred: \n\n • Minimum 3 years machine shop experience required, preferably in an engineering environment using the majority of the equipment listed above\n\n Knowledge, Skills, and Abilities: \n\n • Proficient in Microsoft Office\n, • Ability to read and work from blueprints, drawings, sketches, work orders or written instructions\n, • Able to read blueprints for finish specifications and critical dimensions.\n, • Ability to read calipers, micrometer, optical comparator, height gauges and other inspection tools as needed.\n, • Use of trade mathematics; \n, • Experienced in a manufacturing facility.\n, • Detail oriented and efficient; able to multi-task.\n, • Welding experience is desirable.\n, • Able to work under general supervision and follow instructions.\n, • Highly proficient in Microsoft Office\n, • Excellent data entry skills\n\n Other Requirements \n Work Environment \n The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. \n Physical Requirements \n The employee could frequently be required to walk; use hand to finger, handle, or feel; reach with hands and arms and talk or hear. The employee could be required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee could occasionally lift and or move up to 50 pounds. Specific vision abilities required by the job could include close vision, distance vision, peripheral vision and ability to adjust focus. \n Travel Requirements \n N/A \n Equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities \n Americans with Disabilities Act (ADA): Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. \n \n The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.

Job DescriptionBenefits: • 401(k), • Employee discounts, • Health insurance, • Paid time off Join Alpha MX Support! Alpha MX Support is proud to be NY/NJ’s premier business aviation support team. With offices at Teterboro and Morristown Airports our technicians and Mobile Repair Units travel to any of the area airports to support private jet operations of all kinds. We pride ourselves on our professionalism, exceptional communication, and drive to fix things right the first time. If you are the kind of A&P who thrives on problem solving, important time critical repairs, and working with a team of passionate mechanics please join our team! Overview: Alpha AOG technicians work a variety of fleet types in a variety of locations. Most of our work is performed in teams with crews taking a fully stocked mobile repair unit to a job and working it through to completion. Once on site, mechanics communicate with our customers maintenance controllers, troubleshoot, and repair the issue. We work on everything from simple service checks and departure supports to complex discrepancies and detailed inspections. Most of our work is performed out of TEB/MMU/HPN but we do travel to other airports withing a 75 mile radius on regular occasion. Responsibilities: • Troubleshoot technical discrepancies and execute repair of company aircraft, • Accomplish aircraft inspections per aircraft maintenance manual, • Inspect and assist in maintenance of company equipment and tooling, • Work as a member of a team to complete repairs, • Follow safety measures, good shop practices and cleanliness standards, • Communicate discrepancies to Maintenance Control department found during inspections and follow directions to troubleshoot and repair faulty conditions, • Ensure that all aircraft documentation is completed accurately per company and FAA procedures prior to aircraft departure, • Organize daily tasks and coordinate inspections/repair of aircraft, • Coordinate materials and tooling requirements for projected work for entire shift, • Additional duties assignedQualifications:, • High School Diploma or equivalent, • Valid Federal Aviation Administration (FAA) Airframe and Powerplant Certificate, • Must be able to pass FAA drug test, • Must be able to pass background checkSkills:, • Must be able to read, write, fluently speak and understand the English language, • Strong analytical, interpersonal, verbal and written communication skills, • Working knowledge of Microsoft software and in use of digital manuals, • Ability to read and interpret blueprints, drawings, schematics and technical orders, • Proficient in use of electronic test equipment, voltage or amperage measuring, recording devices and navigation troubleshooting equipment, • Strong work ethic and organizational skills, • Must be able to work in variable weather conditions, • Ability to lift parts and equipment, • Able to work rotating schedules to include weekends, nights and holidays Schedule: · Your schedule will alternate weekly between Sunday through Wednesday and Sunday through Tuesday split shifts. (4 on, 3 off, 3 on, 4 off). · Technicians are “on call” without fixed hours. Compensation: · Pay will be commensurate with experience ranging from $45 per hour to $65 per hour. · All technicians will be compensated for a minimum of 80 hours per pay period (every 2 weeks) regardless of hours worked with overtime paid at 1.5X your hourly rate. Benefits: · Company sponsored healthcare, dental, and vision will be provided · 401(k) match of 4% of your annual salary · Paid time off o Techs will be granted 80 hours (10 days) of PTO per year. o On their second anniversary, PTO accrual will increase to 96 hours per year (12 days). o On their third work anniversary, PTO accrual will increase to 128 hours per year (16 days) o Up to 40 hours of PTO can be rolled over to following years. o Shift trading is permitted with supervisor approval.

This job post is collecting resumes for manufacturing shop clerks in our Garfield, NJ warehouse. It does not necessarily mean we currently have an opening. Once you apply your application will be saved in our database for future openings. Positions on the manufacturing shop floor include assemblers, engravers, laminators, screen press operators, packaging and floaters. Some essential duties and responsibilities of each role are: • Review products for quality control and to ensure they meet expectations, • Disassemble, modify, and reassemble products, • Examine connections for correct fit of parts and subassemblies, • Maintain a safe and clean environment, comply with safety regulations, • Troubleshoot malfunctions, alert supervisors if repairs are needed, • Maintain inventory, expedite supply orders when inventory levels are low, • Minimize waste by conserving materials and resources, • Monitor equipment operation to ensure that products are not flawed., • Set equipment controls to meet cutting specifications., • Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools., • Mount materials or workpieces onto production equipment., • Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving., • Clean workpieces or finished products., • Insert cutting tools or bits into machines and secure them, • Receive production orders and job assignments from supervisor, • Verify the materials supplied for production are correct to produce job., • Set up press by hanging the proper roll of film, setting up feeder and delivery and setting the correct timing and tension required., • Pull proof sheets to confirm material position, adhesion and appearance and secure an approval prior to the production run., • Complete job maintaining optimum production rate while maintaining all quality standards according to customer specifications or company guidelines monitoring for defects, • Inspect printed material to ensure the correctness in all areas of color, registration, stock, and all other customer specifications., • Adjust and maintain registration, color, perforations, and other customer specific printing specifications, • Conduct a visual inspection prior to printing of all material stock and ink for defects or noncompliance with job specifications., • Carry out the final inspection to ensure the material, ink, plates or screens, cylinder/rollers, tension, and all other necessary customer specifications are correct prior to the start of the running the job., • Adjusts all press machine parts and equipment: feeders, grippers, guides, feed wheels, cameras, and other machines parts, using proper equipment., • Scan product bar codes into computer system and sure the correct product items are as described per order., • Ensure quality control of orders and that they are packaged properly for outgoing shipping including the correct quantity, weight, and item numbers/custom., • Sort and count products before packaging., • Operate assembly machines such as product sealing and laminating machines., • Gather and obtain finished products throughout the warehouse from assemblers, engravers, laminators, screen press operators, and digital printing teams to then package for shipping., • Load products onto rolling cards and send them to the shipping team. Experience and qualifications: • High school diploma/GED, • 1-2 years of experience or specialized training in general assembly preferred, • Ability to read, write, and understand English, • Ability to stand for long periods of time, • Ability to lift up to 50 pounds, • Ability to bend, reach, and stoop, • Skilled in operating hand and power tools preferred, • Strong attention to detail, may work on assignments that are routine in nature, • Respectfully take direction from supervisors, overall positive attitude, • Follow standard practices and procedures when directed, • Reliable and prompt in attendance, • Productive in fast-paced environments, • Available to work overtime when needed, may be asked to work holidays or weekends Benefits: • Competitive pay wage., • Health, dental, and vision insurance offered., • Company-paid basic life insurance., • 401(K) with matching contribution., • Pet Insurance., • Paid Time Off- vacation, personal, sick, and holidays.

Job Description Job Title: Fleet Mechanic Classification: Hourly, Non-Exempt, Full Time Department - Location: Transportation - NJ Direct Supervisor: Fleet Maintenance & Equipment Manager Job Summary: The Fleet Mechanic is responsible for maintaining and repairing company fleet equipment. This role works closely with the Fleet Maintenance & Equipment Manager, dispatch, drivers, and other mechanics to ensure all equipment is safe, reliable, and compliant with company and DOT regulations. Supervisory Responsibilities: • None Essential Responsibilities: • Troubleshoot, diagnose, and repair diesel tractors, tanker trailers, and other fleet equipment., • Perform scheduled preventive maintenance (PMs) including oil changes, inspections, and system checks., • Repair and maintain key components including brakes, suspension, electrical systems, aftertreatment systems, and drivetrain components., • Conduct DOT annual inspections and ensure all equipment meets regulatory requirements., • Perform roadside repairs and respond to emergency breakdowns as needed., • Repair tanker components including piping and valves., • Maintain and repair additional equipment such as front-end loaders and other company vehicles., • Utilize diagnostic software and tools to identify and resolve mechanical issues., • Complete and maintain accurate repair orders and maintenance records in a timely manner., • Review and respond to Driver Vehicle Inspection Reports (DVIRs)., • Maintain shop organization, cleanliness, and safe working conditions., • Assist with parts inventory and ensure necessary materials are available., • Travel between company locations or vendors as needed. Required Skills/Abilities: • Strong mechanical aptitude with the ability to work independently and as part of a team., • Proficiency with diagnostic tools and basic computer systems., • Ability to work in confined spaces (including tanker trailers)., • Strong problem-solving and troubleshooting skills., • Ability to communicate effectively with team members and leadership., • Ability to operate shop and mobile equipment (e.g., forklifts, pallet jacks)., • Willingness to respond to after-hours service calls as needed., • Must be able to pass a 10 panel controlled substance testing and random testing after that., • Must be able to pass a background investigation check and maintain in good standing order, as per TSA's TWIC criteria. Must maintain a clean driving record. Education and Experience: • High school diploma or equivalent required., • Minimum of 3 years of truck or diesel repair experience required., • Tanker trailer experience preferred but not required., • Class A CDL with X endorsement preferred, or ability to obtain within first year of employment. Physical Requirements: • Must be able to lift, push, and pull up to 50 lbs., • Must be able to stand, walk, bend, kneel, and work in various positions throughout the day., • Must be able to work in varying weather and shop conditions., • Must be able to work in confined spaces as required., • Must own a basic set of heavy-duty mechanic tools. This position description is not intended to be and should not be construed as an all-inclusive list of responsibilities, skills, or working conditions associated with this position. While this position description is intended to reflect the position's activities and requirements accurately, management reserves the right to modify, and or remove duties as necessary. This is a Safety Sensitive Position within the organization. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Job DescriptionMechanic Manager Title: Mechanic Manager Reports to: Head Mechanic (Sr. Manager - Mechanic) Department: Operation – Production Management Responsibility Summary: 7+ years of maintenance experience in an industrial or manufacturing environment and meet skills requirements. Required to show consistent skill progression and achieve Tech 2 within 3 years. Good working knowledge of filling and assembly equipment and systems. Ability to operate power shop tools in addition to common hand tools safely and effectively. Experience working with a wide range of industrial equipment and with hydraulics, pneumatics, lubrication, welding, pipe-fitting, power transmission systems, etc. Key Responsibilities: • Great attention to detail, troubleshooting production equipment such as high-speed automated lines, different types of fillers, home-built machines, cartoners, inkjets, labelers, and laser marking systems, • Ability to work well under pressure and juggle multiple and changing deadlines in a fast-paced environment, • Acquire the technical expertise to set up each production equipment, • Report all problems that prevent the completion of assigned tasks to your supervisor, • Work closely with the different departments to ensure smooth start-up of the production lines, • Analyze, assess, and record any deviation or change in the packing processes, modify equipment as assigned to support a continuous improvement culture, • Acquire the technical skills to disassemble, clean, and re-assemble each production equipment, • Continuously look for and recommend equipment and system improvements, • Ensure compliance with the production compliance with cGMP policies and company SOP guidelines, • Maintain a fully operational, safe, and clean work environment, • Ensure compliance with the Company’s operational policies and industry regulations, • Perform mechanical PMs during operation or during periods of scheduled downtime Qualifications: • High school diploma or GED or Higher, • English communication skills are required plus Korean or Spanish helpful, • Minimum 7+ years’ production line experience in a cosmetic, pharmaceutical, or food industry, • Work within a team structure with minimal supervision, • Experience required with different types of filling equipment, i.e. liquid, tube, powder, creams, Hot Pour, • Knowledge of FDA, cGMP, and OSHA regulations, • Excellent written and oral skills and management leadership skills, • Strong interpersonal, communication, and collaboration skills, • Excellent problem-solving & innovation techniques Pay Range & Benefits: • Pay Range: $65,000 - $75,000, • Compensation will be determined based on the candidate's qualifications and experienceBenefits:, • Medical, Dental, VisionOper, • Life/AD&D Insurance, • Paid Time Off (PTO), • Special Paid Leave for employees’ personal events, • Company Paid Holidays, • 401(k) with employer match, • Year-End GiftEqual Opportunity Employer Englewood Lab, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, pregnancy, veteran status, or any other characteristic protected by federal, state, or local law. Englewood Lab, Inc. provides reasonable accommodations to qualified individuals with disabilities in accordance with applicable law. Powered by JazzHR 4eFVl8IW4F

Job Description Mendon Truck Leasing and Rental, a branch of PETIT FORESTIER GROUP, a full-service leasing and rental company and a leader in the refrigerated fleet market, is searching for full-time Class C Mechanics to work at our Bronx location. The schedule is Mon-Fri 3:30 pm-12 am. Full Time - Union Local 447 - $33.54/hour Under direction of a Supervisor, Lead Technician or a Class A Mechanic, a Class C Mechanic generally performs minor repairs and all aspects of preventive maintenance on all types of trucks and trailers (i.e., Industrial trucks, light duty truck tank truck, tractor, tank trailers, etc.) RESPONSIBILITIES: • Read written job and/or oral job orders and communicate orally, document in writing (including computer documentation) regarding malfunctions, damage and repairs, parts and preventative maintenance required., • Assists higher level mechanics when and where directed., • Performs simple mechanical repairs as directed by the supervisor or mechanics to whom assigned., • Performs clean-up duties in the shop and yard areas as directed., • Secures parts and tools for mechanic to whom assigned as directed., • May be called upon, to perform any of to perform any of the lesser skilled jobs in the shop and yard area., • Performs other duties as directed. QUALIFICATIONS: • Must be able to obtain a CDL within 6 months after hire., • Demonstrated ability and experience performing the tasks outlined in the responsibilities detailed above with supervision on all types of trucks and trailers., • High school diploma or equivalent required., • Post-Secondary Degree, Technical Certification, or Vocational Certification is preferred., • Basic tools required., • Ability to communicate effectively., • Knowledge of computers to operate diagnostic test equipment and company software programs proficiently. WORKING CONDITIONS: • Shop, office, yards, vehicle environment, may require lifting of 50 to 75 lbs., • This position requires driving company vehicles. Job Type: Full-time Work Schedule: Monday to Friday, 3:30 pm - 12 am Compensation: Hourly $33.54 ($69,763/year) Location: Bronx, NY Benefits: • Dental Insurance, • Vision Insurance, • Health Insurance, • Life Insurance, • Sick Time Off, • Vacations, • Holidays, • Birthday off, • 401(k)

Job Description East Group/ SalSon Logistics is seeking an experienced Diesel Mechanic / Heavy-Duty Truck Technician to join our Fleet Maintenance team. The Diesel Mechanic is responsible for diagnosing, repairing, inspecting, and maintaining our fleet of commercial trucks, tractors, trailers, and related equipment. This position plays a critical role in keeping our fleet safe, reliable, and on the road. We are looking for a hands-on mechanic who takes pride in their work, understands the demands of a fast-paced trucking operation, and can effectively diagnose and repair mechanical, electrical, air, brake, and other heavy-duty vehicle systems. Essential Duties & Responsibilities Diagnose, troubleshoot, repair, and maintain Class 8 tractors and other commercial fleet equipment. Perform preventive maintenance inspections and scheduled fleet maintenance. Diagnose and repair diesel engine and related mechanical issues. Inspect, diagnose, and repair air brake and braking systems. Diagnose electrical and electronic system problems using appropriate diagnostic equipment. Repair and maintain suspension, steering, cooling, exhaust, and air systems. Perform repairs to truck and trailer lighting and electrical systems. Diagnose and repair starting and charging systems, including batteries, starters, and alternators. Perform tire inspections and identify conditions requiring repair or replacement. Inspect and repair trailers, including brakes, lighting, suspension, doors, landing gear, and related components. Perform DOT-related vehicle inspections and identify safety defects. Complete preventive maintenance services, including oil changes, filters, lubrication, fluid inspections, and other required services. Respond to equipment breakdowns and assist with emergency repairs when necessary. Identify additional maintenance or safety concerns during inspections and communicate findings to Fleet Maintenance management. Perform road tests when appropriate to verify repairs. Use diagnostic software, scan tools, meters, and other equipment to troubleshoot vehicle systems. Complete repair orders and accurately document labor, parts, repairs, inspections, and services performed. Communicate parts and material needs to the appropriate supervisor or parts personnel. Maintain tools, equipment, and work areas in a safe and organized condition. Follow company safety procedures and applicable DOT requirements. Work closely with drivers, Fleet Maintenance, Operations, and other departments to minimize equipment downtime. Perform additional maintenance and repair duties as assigned. Qualifications Previous experience as a Diesel Mechanic, Diesel Technician, Fleet Mechanic, Truck Mechanic, or Heavy-Duty Technician preferred. Experience working with Class 8 tractors and commercial trucks strongly preferred. Knowledge of diesel engines and heavy-duty vehicle systems. Knowledge of air brake systems, suspension, steering, electrical systems, and preventive maintenance. Ability to diagnose mechanical and electrical problems effectively. Ability to read and understand repair manuals, service information, wiring diagrams, and diagnostic information. Ability to safely operate shop equipment, power tools, diagnostic equipment, and hand tools. Ability to work independently and as part of a fleet maintenance team. Strong troubleshooting and problem-solving abilities. Strong attention to safety and quality. Valid driver's license required. CDL is a plus but not required unless designated for specific job responsibilities. Preferred Qualifications Experience maintaining a large commercial trucking fleet. Class 8 tractor and trailer repair experience. DOT inspection experience. ASE certifications are a plus. Experience with computerized diagnostic equipment. Experience diagnosing aftertreatment and emissions systems. Experience with ABS, air brake, electrical, and electronic control systems. Welding and fabrication experience is a plus. Experience performing roadside or mobile repairs is a plus. Physical Requirements This position requires the ability to perform the physical duties normally associated with commercial truck and diesel repair, including: Standing, walking, bending, kneeling, crouching, and reaching throughout the workday. Working underneath and around commercial vehicles and equipment. Using hand tools, power tools, and heavy-duty shop equipment. Climbing into and out of trucks and accessing various areas of commercial equipment. Safely lifting and moving parts, tools, and equipment consistent with the requirements of the position, with assistance or mechanical devices when appropriate. Working in a shop environment that may include exposure to noise, grease, oils, fuels, exhaust, weather conditions, and moving equipment. Reasonable accommodations may be provided to qualified individuals with disabilities in accordance with applicable law. Key Skills Diesel Repair | Class 8 Trucks | Fleet Maintenance | Preventive Maintenance | Air Brakes | Electrical Diagnostics | Truck Repair | Trailer Repair | DOT Inspections | Heavy-Duty Equipment | Troubleshooting | Roadside Repair What We're Looking For We're looking for a mechanic who doesn't simply replace parts — we want someone who can diagnose the problem, determine the proper repair, and get the equipment safely back on the road. The right candidate will understand that in transportation, equipment downtime matters. You should be comfortable prioritizing repairs, communicating problems clearly, and working with the Fleet Maintenance team to keep SalSon's operation moving. About SalSon Logistics SalSon Logistics is a transportation and logistics company supporting a diverse commercial fleet and fast-paced transportation operation. Our Fleet Maintenance team plays an essential role in supporting our drivers, customers, and operations by keeping equipment safe, compliant, reliable, and ready for service. East Group Logistics is an Equal Opportunity Employer.

Job Description Under direction of a Supervisor, Lead Technician or an Class A Technician, a Class B Mechanic will assist in the repair and diagnosis on all types of trucks and trailers (i.e. industrial trucks, light duty trucks, tank trucks, tractors, tank trailers, etc.) including but not limited to gasoline and diesel engines, overhauls and rebuilding of transmissions and differentials, clutches, starters, alternators, refrigeration systems, air conditioning systems, power steering, electrical systems, wheels, tires, shock absorbers and brake systems, steering gear box, preventative (P.M.) maintenance and all associated component parts Responsibilities • Read written job and/or oral job orders and communicate orally, document in writing (including computer documentation) regarding malfunctions, damage and repairs, parts and preventative maintenance required., • Ability to diagnosis and repair most truck and trailer breakdowns., • Be able to repair and rebuild engines with some guidance and direction., • Perform some of the less complicated repairs to transmissions, driveline, and differentials., • Possesses knowledge of and performs repairs to engine accessory components., • Has a general knowledge of, and general proficiency in the repair of steering, suspension, brake systems, frames, axle, electrical, hydraulic and refrigeration systems., • Works with the usual amount of supervision and direction. Requires assistance in unusual or complicated assignments., • Performs road service., • Performs other duties as directed., • Will need normal supervisory and instructional attentions. WORKING CONDITIONS: Shop, office, yards, vehicle environment, may require lifting of 50 to 75 lbs.

The expected salary range for this position is $175,000 - $250,000 depending on experience *Applicants must be eligible to work in the United States without visa sponsorship now or in the future* Tutor Perini is seeking a Superintendent - Station Finishes for our office in Newark AirTrain project About Tutor Perini: Extraordinary Projects, Exceptional Performance The world relies on infrastructure to ensure public safety, maintain a quality of life and support a healthy economy. For more than a century, Tutor Perini Corporation's family of civil construction companies has supported the development and maintenance of infrastructure across our great nation.We construct and rehabilitate highways, bridges, tunnels, mass-transit systems, and water management and wastewater treatment facilities. In short, we help our clients make "public works" work. Our corporate integrity, financial strength and outstanding record of performance makes us an attractive partner on large, sophisticated infrastructure projects. From coast to coast, notable projects include The Purple Line (D Line) Extensions in Los Angeles, SR 99 Viaduct replacement tunnel in Seattle, East Side Access projects and the Hudson Yards Platform in New York, Central Subway Third Street Light Rail in San Francisco, and multiple airport expansions and bridge projects. Extraordinary Projects need Exceptional Talent The Superintendent - Station Finishes is responsible for planning, coordinating, and supervising all station architectural and finish work associated with major transportation infrastructure projects. This position provides daily field leadership for interior station construction activities, including finishes, architectural systems, specialty installations, and final turnover. The Superintendent works closely with project management, subcontractors, owners, consultants, and inspection agencies to ensure all work is performed safely, on schedule, within budget, and in accordance with contract requirements. The ideal candidate will have extensive experience managing station finishes on transit, rail, airport, or large commercial construction projects in New York City. • Manage and supervise all station finish activities from rough-in through final completion., • Coordinate installation of:, • Tile and terrazzo, • Stone and masonry finishes, • Metal panels and ceilings, • Drywall and painting, • Architectural concrete finishes, • Doors, frames, and hardware, • Signage and wayfinding systems, • Specialty architectural components, • Platform and passenger-area finishes, • Develop and manage short-term look-ahead schedules for station finish activities., • Coordinate daily work with MEP, systems, structural, and civil construction teams., • Lead subcontractor coordination meetings and daily field activities., • Ensure work is performed in accordance with contract documents, project specifications, owner requirements, and approved shop drawings., • Identify and resolve field conflicts, constructability issues, and sequencing challenges., • Monitor manpower levels, production rates, and subcontractor performance., • Maintain project schedule milestones and implement recovery plans when required., • Conduct regular quality-control inspections and ensure compliance with project standards., • Manage punch list development, deficiency correction, and project turnover activities., • Verify completion of testing, closeout documentation, and as-built requirements., • Maintain a safe work environment and enforce all company and site-specific safety policies., • Prepare daily reports documenting work progress, manpower, equipment utilization, and field issues., • High School Diploma or GED required, Bachelor's Degree in Construction Management, Engineering, or related field preferred., • Minimum 12 years of Superintendent/supervisory experience, preferably with a General Contractor, • Experience on transit, railroad, airport, transportation, infrastructure, or large commercial projects., • Strong knowledge of station architectural systems and finish sequencing., • Ability to read and interpret plans, specifications, schedules, RFIs, and submittals., • Working knowledge of NYC construction practices, quality standards, and inspection requirements., • Experience coordinating union labor and multiple subcontractors., • Experience on MTA, Port Authority, Amtrak, NYC Transit, LIRR, NJ Transit, or airport projects., • OSHA 30 Certification., • NYC SST Supervisor Card., • Experience with phased construction and maintaining operations in active transportation facilities., • Knowledge of ADA requirements and public-facing infrastructure environments., • Proficiency with Microsoft Office and construction management software., • Excellent written and verbal skills OUR MISSION We build critical infrastructure that creates a better world. OUR VISION We strive to be the preeminent full-service civil, building, and specialty contractor by delivering innovative, transformative projects through world-class execution. We are committed to creating lasting value for our customers, upholding the highest standards of safety and integrity, generating exceptional financial results and shareholder value, and fostering a culture where our employees thrive. Equal Opportunity Employer

Job Description Fleet Supervisor Gabrielli Leasing and Rental is currently seeking a Fleet Supervisor to join our team Job Description: • Oversee and enforce quality repairs of all Leasing and Rental trucks assigned to the location. Responsibilities: • Develop, implement, maintain and oversee the administration of workforce planning, workflow and process management to ensure fleet maintenance operations are performing at optimal levels., • Manage PM service schedules and set appointments with customers accordingly, • Act as primary interface to customers with daily updates and/ or facilitate breakdowns, • Write up customer’s vehicle complaints accurately on repair orders, relay to foreman and technicians., • Ensure completion and accuracy of shop paperwork, part purchases, third-party invoices, • Communicate performance expectations and company initiatives on a regular basis to employees, • Check all OEM Dealer Portals and ensure warranty coverage, process repairs covered by warranty, request Goodwill policy for repairs not covered., • Verify GPS systems are reporting properly, • Manage and diffuse customer complaints by developing, implementing and communicating plan of action to correct issues., • Prepare Billback Estimates with photos and approval documentation., • Provide oversight and direction of inventory management and vendor relations, • Perform daily lot checks to ensure they are rental ready Job Requirements • Proficient in PC: Excel, Word, Outlook, Internet Explorer, etc., • VMRS Coding knowledge is a plus, • At least three years of Automotive Service Experience, • Supervisory/Management experience, • Fleet Maintenance and Mechanical knowledge, • Must pass background check and pre-employment drug test, • Must have valid Driver’s License and in good standing with DMV (Clean Record) • Must Be FULLY VACCINATED before applying Looking for candidates willing to grow with our continuously expanding company. Gabrielli Truck Sales is an Equal Opportunity Employer. We value a diverse and inclusive working atmosphere. In furtherance of our culture, all qualified applicants will receive consideration for employment without regard to pregnancy, race, national origin, gender, age, religion, disability, sexual orientation, veteran status, marital status or any other characteristics protected by law. Gabrielli Truck Sales provides reasonable accommodations for employees and applicants with disabilities or pregnant consistent with applicable law. If you need a reasonable accommodation during the application process, please let us know. Benefits: • Medical and Dental plan, • Paid Holidays, • Paid vacation and sick/personal time, • 401k with an employer match, • EMPLOYER Paid Life insurance benefit, • Gym Reimbursement program

Position Purpose: Customer Service/Sales associates provide fast, friendly service by actively seeking out customers to assess their needs and provide assistance. These associates learn about products using our tools, and provide information to customers in order to sell an entire project. Associates in this position will learn how to greet, qualify, recommend and close every customer in their department, and know how to handle basics in adjacent departments. Customer Service/Sales associates maintain the in-stock condition of assigned areas, and ensure it is clean, shop-able, and safe. Each associate has the responsibility of providing a safe working and shopping environment by following all safety policies & standards, completing specified safety training, immediately correcting hazards & unsafe conditions or reporting conditions to the Manager on Duty, and working safely as not to endanger themselves, co-workers, vendors, or customers. These associates work in cooperation with their Department Supervisor and other associates in their department as well as other departments. Specific store departments may include Building Materials, Dcor, Electrical, Flooring, Garden, Hardware, Kitchen & Bath, Lumber, Millwork, Paint, Plumbing and Tool Rental. The Customer Service/Sales position types may include Department Sales, Lead Generator, Pro Account Sales, Sales Specialist, Special Services, and Customer Order Specialist. Benefits offered include health care benefits, 401K, ESPP, paid time off, and success sharing bonus. For a full list of the various benefits The Home Depot offers, visit careers.homedepot.com/our-benefits. Location: Clifton, NJ

WIN Waste Innovations is looking for a Lead Mechanic. The Lead Mechanic is responsible for the installation, troubleshooting, cleaning, inspecting and maintenance of mechanical equipment throughout the facility in a safe and professional manner. They will indirectly lead and prioritize Mechanical Maintenance daily activities working with the on-shift Operations Supervisor(s) and ensure Mechanics have necessary tooling and materials to complete Work Orders effectively. They will report all Mechanical Maintenance activities to direct Supervisor and facility management team effectively and in a timely manner. • Reviews and performs immediate oversight, ensuring work-orders and requisitions and documents all critical and or pertinent information on a routine basis, • Individual must demonstrate proficiency with Computerized Maintenance Management System (CMMS) software (Tabware), • Available to work scheduled and unscheduled overtime, • Respond and report to work during off hours when emergency repairs are required and ability to be on call, • Troubleshoot mechanical, hydraulic, and pneumatic equipment, diagnose problems, and make necessary repairs, • Operate mobile equipment including, but not limited to, industrial forklifts, manlifts, skid steer type loaders, and other mobile equipment, • Performs preventive and repair maintenance procedures safely, environmentally compliant, and professionally with minimal supervision in accordance with Federal and State Regulations, and Company Work Rules, Policies and Procedures, • Identify and repair potential safety hazards, • Ability to don all necessary PPE and safely work at heights, confined spaces, and other precarious places, • Ability to communicate effectively via radio using three-part communication, • Actively participate and support operations functions as necessary, including but not limited to internal equipment inspections, fire watch, cleaning of work area(s), etc., • Use various Machine shop equipment such as a bandsaw, drill press, Bridgeport, stationary grinder, parts washer, etc., • Proficient knowledge, skills and abilities required to properly identify and safely and effectively use and maintain hand tools and portable power tools on a routine basis while performing maintenance tasks, • Travels to other facilities with-in the Company when technical support is required, • Takes proactive measures to address improvement opportunities, • Assists in training other employees, • Directs those assigned to assist in the safe, environmentally compliant, and efficient completion of maintenance tasks, • Assumes increased levels of responsibility when required or requested. Performs lesser skilled duties when required or requested, • Complete the Corporate and Plant Training Programs within the time frame prescribed, • Identifies and effectively uses basic and precision measuring tools to calculate and determine lengths, surface areas, and volumes as necessary while performing maintenance tasks on a routine basis, • Follows standard safety and environmental procedures, correct safety, and environmental hazards, and report them to the Shift Supervisor immediately. Reads, understands, and applies information such as lockout/tagout procedures, safety and environmental rules, job hazard analyses, operating and maintenance instructions, and procedure manuals, • Maintains and follows all Company environmental compliance, health and safety requirements, policies, procedures, and rules within, • Completes all required Environmental Management System and Compliance Training, • Works rotating shifts, if requested, • Communicates clearly and concisely both verbally and in writing; as well as communicate clearly whether using in-situ intercom system, two-way radio, or face to face, • Anticipates typical problems, identify potential or recurring problems, and takes appropriate action. Troubleshoots equipment, diagnoses problems and repairs, • Provide necessary expertise on equipment repairs and reference O&M Manuals to support the Mechanical Maintenance shop with specific work orders, • Facility Subject Matter Expert (SME) with operating equipment in a Waste-to-Energy facility or similar industry including but not limited to, chain & flight conveyors, belt conveyors, hydraulic equipment, pneumatic equipment, overhead cranes, and various style pumps, • Proficient in welding practices and facility Subject Matter Expert (SME), including but not limited to; SMAW, GTAW, GMAW, Brazing and Soldering processes, • Proficient in operational knowledge of facility equipment and systems, • High School diploma (GED), • Tech Schooling Experience, • Minimum of 8 years' experience in the Industrial or Power Industry Maintenance Field, or a minimum of 2 years' experience as a 1st class Mechanic, • Proficient with Microsoft Software; Excel, Word, Office, etc., • Ability to read and record measurements with precision, • Proficient in welding, soldering, brazing, pipe fitting, • Maintain positive work environment by acting and communicating in a manner so that you get along with customers, clients, vendors, co-workers and management., • Licenses as required by Local, State, Federal, Environmental and/or Health/Safety Regulatory agencies., • Handle tools, equipment, fine motor skills, • Reach with hands and arms, • Climb and walk on heights often greater than 4 feet, • Occasionally must be able to lift equipment weighing up to 50 lbs, • Industry leading benefits, • Multiple and flexible medical plans, • Outstanding PTO program, • Floating Holidays, • Strong 401k program and company match, • Tuition reimbursement plan, • College loan reimbursement, • College scholarship program for dependents, • Parental Leave Program, • Inclusive culture, • Employee engagement events, • Employee resource groups WIN Waste Innovations is a waste management company committed to delivering essential waste management solutions to customers and communities supported by our team of 2,300 employees. We believe in preserving our environment for future generations while providing for today's needs. WIN Waste Innovations is a vertically integrated business with a platform of 50 strategically located collection, transfer, and disposal assets. These include waste-to-energy facilities, transfer stations, ash monofills, landfills, and fleets of rail cars and collection vehicles. We process more than 11 million tons of waste annually, converting 6.7 million tons of waste into clean, renewable energy that powers 340,000 homes. We recycle more than 234,000 tons of plastic, paper, and metals from the waste stream. At WIN Waste Innovations, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short-Term Disability. As well as Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled.

Company: Cox Automotive - USA Job Family Group: Vehicle Operations Management Level: Supervisor Flexible Work Option: Can work remotely but need to live in the specified city, state, or region Travel % Yes, 25% of the time Work Shift: Day Compensation: Compensation includes a base salary in the range of $73,400.00 - $110,000.00. The base salary may vary within the anticipated base pay range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include an incentive program. Job Description: Must live proximate to the market. The Manheim Mobile Inspections Supervisor reports to the Manager and is responsible for the effective leadership and supervision of a team of Mobile Inspectors in a specified geographic territory. The Supervisor's primary focus is to ensure inspection quality and drive operational efficiency with a team of 10 to 15+ Mobile Inspectors while maintaining a culture of operational excellence and accountability. The Supervisor assists with operational matters concerning the mobile inspections, new car inspections, and floorplan audits in a designated area. The Supervisor will ensure that inspections and floorplan audits performed within the assigned territory meet quality, productivity and safety objectives. The Supervisor is responsible for the recruiting, hiring, onboarding and training of Mobile Inspectors within their assigned area. The Supervisor is also responsible for the ongoing performance management of the team using Lean Daily Management, remote and field based audits, and the implementation of continuous improvement initiatives within the team. The Supervisor will also build and maintain relationships with boundary partners in the assigned area including: auctions, sales, remote dealer services, and other teams to ensure the successful delivery of services. The Supervisor will support and develop their Mobile Inspection team, and triage and/or escalate any field-based challenges to the appropriate teams (i.e. Dispatch, Help Desk, etc.). The Supervisor will have the opportunity to interact with multiple levels of the organization, and requires a detailed oriented team member that can think outside of the box and thrives in a fast-paced environment. Primary Duties / Key Responsibilities: • Manage the productivity and quality of a team of Mobile Inspectors, and closely partner with the Dispatch and Quality Assurance teams within Manheim Mobile Inspections., • Ensure inspector adherence to established inspection processes, including the documentation of all required disclosures and photos within the inspection application., • Monitor inspection quality through digital and in-person inspection audits, as well as arbitration reviews., • Provide coaching and corrective actions / discipline as necessary., • Build and maintain a strong working relationship with internal and external partners., • Coordinate with the MMI Manager and boundary partners, including the Sales, Auction, and Remote Dealer Services teams, to ensure client expectations are met., • Provide quality service and interact with automotive dealers and commercial clients to resolve issues and concerns., • Recruit, hire, onboard, and provide ongoing support to employees., • Provide or coordinate all skill-based and inspection-focused training for team members (Inspection app, eLearning, field training, etc.)., • Conduct vehicle inspections and floorplan audits as needed., • Review work volumes and continuously monitor staffing levels., • Review team performance against KPIs and LDM metrics; implement tactical plans with guidance from Mobile Inspections Manager., • Coach, develop, and empower team members, and create a cohesive team environment., • Procure, distribute, and track company equipment., • Visibly demonstrate a commitment to safety by following all safety and health procedures. Model proper safety behaviors and monitor the team's adherence to them., • Conduct regular performance reviews for all direct reports in coordination with the Mobile Inspection Manager., • Effectively lead team members by setting an example in behavior, championing Cox values, and ensuring that all employees are treated with respect., • Enforce all company policies and procedures related to employee and customer conduct., • Perform other duties as assigned. Required Experience & Specialized Knowledge and Skills: • High School Diploma/GED and 5+ years relevant experience in related field., • One year's experience in leading teams is preferred., • Ability to work in a high performance, fast-paced team environment., • Experience with mobile inspections and/or floorplan audits preferred., • Previous body shop, mechanical, or estimating experience preferred., • Displays a general understanding of frame and body repairs and mechanical knowledge., • Technical and computer proficiency with Microsoft Office suite, scheduling & routing software, and vehicle inspection applications., • Demonstrated business acumen and analytical skills, • Self-motivated and can motivate others., • Excellent organizational skills, customer-focused, proactive, and team-oriented., • Effective communication (written and verbal) and interpersonal skills required., • Ability to set priorities and solve problems., • Ability to work with remote supervision, and to supervise remote employees., • Vision abilities required include close, distance and depth perception., • Ability to sit, stand or walk for prolonged periods of time. Ability to bend, stoop, squat, or kneel; ability to lift and hold at least 10lbs at waist level for an extended period; ability to lift up to 30lbs., • Exposure to moderate noise levels may be exposed to fumes and odors., • Work Conditions: Regular exposure to outside environmental conditions., • Must have a valid driver's license and a safe driving record., • Travel within the region required, • Requires physical ability and mental acuity to execute the duties of the position successfully within required timeframes to meet business requirements. Drug Testing: To be employed in this role, you'll need to clear a pre-employment drug test. Cox Automotive does not currently administer a pre-employment drug test for marijuana for this position. However, we are a drug-free workplace, so the possession, use or being under the influence of drugs illegal under federal or state law during work hours, on company property and/or in company vehicles is prohibited. Benefits: The Company offers eligible employees the flexibility to take as much vacation with pay as they deem consistent with their duties, the company's needs, and its obligations; seven paid holidays throughout the calendar year; and up to 160 hours of paid wellness annually for their own wellness or that of family members. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us: Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells or simply uses cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship.EOE, including disability/vetsApplicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future.

A Retail Store Manager, or Shop Manager, is responsible for facilitating and supervising daily operations at a store to make sure that employees work together effectively to make sales and contribute to shop upkeep. Their duties include communicating with vendors about inventory orders, scheduling employee shifts and training new employees. A Retail Store Manager is responsible for managing a retail store, which includes overseeing sales, staff and inventory. Retail Store Managers have the following duties and responsibilities: • Supervise, train and assist employees like Sales Representatives and Retail Store Clerks in customer service, store maintenance and product promotions., • Develop and maintain a schedule for employees and promotions centered on holiday sales and other cycles., • Seek ways to better promote the store, the product line and service within the store., • Maintain proper inventory levels, ensure stocking, implement purchasing plans and maintain contact with suppliers to ensure maximum efficiency in meeting sales goals., • Implement cross-training of employees and Assistant Managers to maintain productivity at all times., • Manage all controllable costs with a view to maintaining profitability., • Ensure the store remains clean and presentable at all times., • Hire and train as needed to ensure adequate personnel is on hand to provide outstanding customer service. Required Qualifications: • 3+ years of demonstrated consistent retail sales/customer service experience (fashion/apparel retail experience preferred), • Experience in a Store Manager, or a Team Supervisor role, • Excellent leadership skills and the ability to work with teams, • Open availability (Opening and/or closing shifts, weekends, Holiday seasons), • Good communication and interpersonal skills towards customers, staff members, Company Leadership, Human Resources & Area/Zone managers, • Excellent problem-solving capabilities, with the ability to work well under pressure, • Must have a reliable mode of transportation upon first date of employment to complete trips to the Bank to submit deposits, • Great attention to detail for purposes of erecting attractive marketing displays, arranging merchandise and maintaining store appearance, • Ability to lift heavy merchandise, walk and stand for long hours

Home Depot - - Responsibilities: Greet, qualify, recommend and close customers; Learn product information and assist customers; Maintain in-stock, clean, shop-able, and safe departments; Collaborate with Department Supervisor and other departments; Follow safety policies and training.

Job Description Position Description: TEMPORARY POSITION to assist with liquidation / closing of the store, targeting closure in the next 30-60 days. Positions needed: Supervisor / Keyholder What Youll Do: Perform store opening and closing duties such as, but not limited to: unlocking/locking the building before/after store hours, preparing/closing cash registers, disarming/setting the alarm, ensuring the store is in a neat, tidy, and safe manner. Supervise and lead a team of associates Greet and assist customers in a friendly and professional manner. Handle customer inquiries, resolve concerns, and ensure a positive shopping experience. Knowledgeably communicate information about current promotions and discounts. Work collaboratively with team members to achieve store goals. Communicate effectively with colleagues and management to ensure a smooth flow of operations. Assist with restocking shelves, folding clothes, and arranging displays to showcase merchandise effectively. Maintain a visually appealing and organized store layout. Monitor and report on inventory levels to support stock replenishment efforts. Help customers find products. Update store signage as necessary based on publish company direction. Process transactions accurately and efficiently using the point-of-sale (POS) system. Thank customers for shopping with us and invite them back to shop future discounts. What Youll Bring: A positive attitude. Previous retail experience preferred but not required. Ability to work in a fast-paced environment and handle multiple tasks. Basic math skills and familiarity with point-of-sale systems. Flexibility in working hours, including evenings, weekends, and holidays. Physical Requirements: Ability to stand for extended periods. Lift and carry merchandise weighing up to 50 pounds. Bend, stoop, and reach to perform tasks. Available Shifts: TEMPORARY POSITION All days, excluding Sunday Morning, day, evening, and night shifts $18.00 - $22.00 Hourly

Job DescriptionDescription: PrecisionX Group is a leading provider of precision metal components, serving critical industries such as aerospace & defense, medical devices, satellite & space, electric vehicles, mining, and semiconductors. By uniting the specialized expertise of GEM, Coining, National Manufacturing, Ditron, MSK Precision Products, and Hudson Technologies, we offer a comprehensive range of advanced manufacturing solutions. Our core capabilities include machining, deep drawing and progressive stamping, Swiss machining, micro stamping, and transfer press. Our team consists of over 600 employees, located in CT, NJ, NY, and FL. With our collective expertise, our strong foundation in metal manufacturing techniques, and a relentless focus on quality and innovation, PrecisionX Group is committed to delivering superior products and services that meet the evolving needs of our customers. We are proud to offer a competitive benefits package, including Health, Dental, and Vision insurance coverage, 401K, Life Insurance, Short Term Disability, Performance Pay Bonus, Paid Time Off, and EAP Program We are proud to offer a competitive benefits package, including Health, Dental, and Vision insurance coverage, 401K, Life Insurance, Short Term Disability, Performance Pay Bonus, Paid Time Off, and EAP Program Position Summary: • The Quality Inspector-Packer is responsible for inspecting, packaging, and preparing products for shipment in accordance with customer specifications, quality standards, and company procedures. This position performs mechanical and visual inspections, maintains accurate inspection and production records, and ensures that products are properly identified, documented, packed, and shipped.Requirements: Essential Functions: To accomplish this job successfully, an individual must be able to satisfactorily perform each stated essential function, with or without reasonable accommodation. Reasonable accommodations may be made to help qualified individuals with disabilities perform the essential functions. Key Responsibilities: Inspection and Packing: • Inspect and pack parts according to due date priority and follow approved specific packing instructions and supervisor guidance., • Interpret sales write-ups and special packaging instructions and accurately maintain charts and inspection recordkeeping., • Operate electronic counting scales and use the shop floor production control system to maintain accurate records for inspected and packed work, including pulling certifications and certificates of conformance., • Use ERP software to process work orders, maintain accurate inventory and transaction records, generate required documentation, and support production and shipping activities., • Use UPS, FedEx, and DHL shipping software to create shipping labels, prepare domestic and international shipment documentation, track shipments, and ensure accurate and timely customer deliveries. Quality Inspection: • Performs company quality control, technical and customer satisfaction activities., • Implements and follows inspection programs and instructions related to manufacturing objectives., • Operates all gages, software, vision systems and related SPC methodologies., • Documents and enforces Standard Operating Procedures (SOPs) within the ISO system. Non-essential Responsibilities: • Performs other duties as directed., • Supports broader inspection, packing, and shipping-related business objectives as needed. Position Qualifications and Competency Statements: • Regard for safety – Ability to follow safety rules and processes and keeps own safety and the safety of others in the forefront of every action., • Integrity – Ability to demonstrate consistency between words and actions. Follows through on commitments., • Attitude – Ability to maintain a positive mindset towards achieving success and eagerness and willingness to accept and meet challenges., • Application of technical knowledge and skills – Ability to comprehend complex technical and specialized information., • Accountability – Ability to accept responsibility and account for his/her actions., • Time and Priority Management – Ability to utilize the available time to organize, prioritize and complete work within given deadlines., • Communication – Ability to effectively communicate with others verbally and in writing. Skills and Abilities: • High school diploma or equivalent GED-level education, • In-house training is preferred. Manufacturing experience preferred., • Ability to read and interpret material cards and process sheets, follow written and verbal instructions, and use computers effectively., • Good manual dexterity, eye-hand coordination, and attention to detail in inspection and packaging work., • Experience with precision measuring equipment such as calipers, micrometers, pin gages, optical comparators, and visual measuring systems. Work Environment: This position involves working in a manufacturing environment that is adjacent to the shop work environment. The employee must be aware of potential hazards, including, but not limited to, working in close proximity to moving mechanical parts, operating vehicles, exposure to electrical current, high temperatures, and chemicals. It's important to maintain a high level of alertness and caution while performing tasks in this work environment.