Trabajos software en Smithtown, New YorkCrear alertas

Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Master Electrician Shift: 3rd (11pm-7am) Pay: $44- $50.22/hr Position Summary: Primary duties include providing safe and timely electrical support, preventative maintenance, installation, service, repair, troubleshooting and resolution of multiple operating machines within a manufacturing industrial environment. The ideal candidate will have mechanical and electrical experience, a familiarity with hydraulics and pneumatics and have basic troubleshooting experience with proven ability of machine repair. How you will impact WestRock: • Utilize electrical/mechanical skills to maintain machinery, • Contribute to a collaborative safety culture that drives results, • Provide rapid response to ensure seamless productivity. What you need to succeed: • 2-3 years in trouble shooting industrial electrical control systems down to component level, • An operational knowledge of automated industrial machinery which includes; motors, servos, pumps, drives, relays, 3 phase-power, communication devices, industrial / electronic controls, and power transmission systems., • A good understanding of hydraulic and pneumatic systems., • Able to install and set up both A/C and D/C drives, • PLC trouble shooting and problem-solving ability with practical, mechanical & electrical aptitude., • Must be able to read and interpret both electrical and mechanical drawings., • Working knowledge of power transmission equipment and bearings., • Basic welding skills preferred but not required., • Familiar with pumps, both air and electric., • Able to install and trouble shoot basic 3 phase motor control circuits, • Some knowledge of the various types of sensors and limit switches, • Familiar with computers and Microsoft software., • Strong written and verbal communication skills., • Ability to work independently in a mature and professional manner., • Ability to work flexible hours, overtime, • High school diploma or equivalent Military training and or Technical School preferred What we offer: • Comprehensive benefits package- including but not limited to medical, dental, vision, 401K, and short-term disability coverage., • Corporate culture based on integrity, respect, accountability, and excellence, • Comprehensive training with numerous learning and development opportunities, • A career with a global packaging company where Safety, Sustainability, and Inclusion are business drivers and foundational elements of the daily work., • The starting range is $44/hr - $50.22hr, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 5 days of paid vacation will be granted after 1 year of service, and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ___ and the application window is expected to close by December 21 2025. #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

Job Description Create Confident Smiles - Join NowDental of Suffolk as a Dental Hygienist! At NowDental of Suffolk, we’re committed to providing top-tier dental care for families in Smithtown, NY, and beyond. Our state-of-the-art facility combines cutting-edge technology, a compassionate team, and a welcoming environment to make every visit exceptional. From advanced restorative treatments to personalized family care, we’re proud to serve as a trusted partner in oral health. We’re seeking a passionate Dental Hygienist to join our thriving practice. Whether you’re an experienced professional or a motivated newcomer, this is your opportunity to thrive in a dynamic environment that values your contributions and supports your growth. Why Join NowDental of Suffolk? • Competitive Pay: $40–50/hour based on experience, plus incentive bonuses, • Comprehensive Benefits: Health, vision, dental, 401(k), life insurance, and disability (eligibility after 30 days), • Generous PTO: 3 weeks paid time off + holidays, • Professional Development: Access to Continuing Education (CE) credits and mentorship, • State-of-the-Art Technology: Utilize digital charting, Denticon software, and advanced tools like 3D imaging and laser dentistry, • Convenient Location: Enjoy on-site parking and modern, private treatment rooms designed for your comfort, • Supportive Team Environment: Join a close-knit, collaborative group of dental professionals About NowDental of Suffolk Located in Smithtown, NY, our modern facility features 9 operatories and cutting-edge technology, including 3D imaging, digital impressions, and laser dentistry. Our team is dedicated to offering a wide range of services, from general and cosmetic dentistry to Invisalign®, periodontal treatments, and same-day crowns. Your Role as a Dental Hygienist • Greet and prepare patients for dental hygiene procedures, • Perform professional cleanings, scaling, root planing, and fluoride treatments, • Educate and motivate patients to achieve optimal oral health, • Conduct diagnostic assessments, including capturing and interpreting x-rays, • Assist in identifying periodontal and restorative needs and collaborate with the dentist to deliver seamless care, • Maintain a clean, organized, and OSHA-compliant treatment area What You Bring • Education: Associate degree or higher from an ADA-accredited dental hygiene program, • Licenses: Active NY state dental hygiene license and CPR certification, • Experience: 1+ year of dental hygiene experience preferred, but new graduates are welcome!, • Skills: Certification in anesthesia is a plus but not required Schedule • Flexible Hours: Monday–Thursday, with alternating Friday and Saturday shifts. Your Career Starts Here At NowDental of Suffolk, you’re not just joining any practice - you’re joining a team that values collaboration, innovation, and exceptional patient care. Take advantage of our supportive environment, advanced technology, and opportunities for growth to make a real impact on our patients’ lives. Ready to Create Confident Smiles? Join NowDental of Suffolk in Smithtown, NY, and be part of a practice where your skills and passion are celebrated. Apply today to start your journey with a team that’s redefining dental excellence! NowDental of Suffolk is a proud affiliate of Affinity Dental Management, an equal opportunity employer committed to a diverse and inclusive workforce. We encourage qualified candidates from all backgrounds to apply and will consider all qualified applicants for employment without regard to race, color, religion, sex (including gender identity, sexual orientation, and pregnancy), national origin, age, disability, or genetic information or other characteristics protected by law. All candidates' employment is contingent on successful completion of a background check, reference check, and employment verification. {Registered Dental Hygienist, Oral Hygienist, Dental Health Specialist, Dental Hygiene Practitioner, Dental Hygiene Therapist, Licensed Dental Hygienist, Oral Health Care Professional, Periodontal Hygienist} PIffa7d72be733-25405-39053261

Now Hiring: Administrative & Accounting Assistant \nLocation: Hauppauge, NY (Onsite • 5 Days/Week) \nSalary: $55,000–$65,000 \nIndustry: International Manufacturing \nApply: Send resumes to \n \nAre you an organized, detail-driven professional who enjoys supporting both administrative and accounting functions? Do you like being part of a small, tight-knit U.S. team within a global company? If so, this is an excellent opportunity to grow your career with an international manufacturer located in Hauppauge. \nWe’re seeking a General Administrative & Accounting Assistant to support daily office operations, bookkeeping activities, documentation, and internal coordination. This role is ideal for someone who thrives in a structured environment, values accuracy, and enjoys working onsite in a collaborative setting. \n \n\n\n \nWhat You’ll Do \nAccounting & Financial Support\n\n\n\t • Record basic general ledger entries and assist with bookkeeping tasks\n\t, • Manage and archive sales and purchase invoices\n\t, • Verify shipping documents and match them with corresponding invoices\n\t, • Monitor payment deadlines for customers and suppliers\n\t, • Support bank transaction checks and payment preparation\n\t, • Assist with periodic tax-related activities (including VAT and filings)\n\nAdministrative & Office Support\n\n\n\t, • Organize and maintain administrative documents, both digital and paper\n\t, • Manage inbound and outbound correspondence (email, mail, PEC as needed)\n\t, • Assist with meeting coordination and scheduling\n\t, • Draft simple reports, documents, and internal communications\n\t, • Maintain office supply inventory and coordinate with vendors\n\t, • Prior experience in administrative and/or accounting support\n\t, • Understanding of basic accounting principles and double-entry bookkeeping\n\t, • Proficiency in Microsoft Office, especially Excel\n\t, • Experience using an ERP or management software\n\t, • Strong organizational skills with excellent attention to detail\n\t, • Clear and professional communication skills\n\t, • Ability to work independently and prioritize multiple tasks\n\t, • Join a small U.S. team backed by a global manufacturing organization\n\t, • Direct impact on financial and operational efficiency\n\t, • Stable, full-time onsite position with long-term growth potential\n\t, • Competitive salary of $55,000–$65,000, depending on experience\n\t Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. \n\t\t\t \n\t\t\t \n\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life—just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. \n\t\t\t \n\t\t\t

This position is located in Bohemia, NY. We kindly ask that staffing agencies and third-party recruiters do not contact us regarding this position. Unsolicited resumes or candidate submissions will not be accepted, and Citnalta will not be responsible for any fees associated with such submissions. Company Overview At Citnalta Construction Corp., we build more than just structures - we build lasting relationships and stronger communities. Over the past 50 years we've grown into a leading Design Builder and General Contractor in the NY Metro area. By putting people first, we prioritize safety, sustainability, and high-quality projects, upholding integrity and ensuring responsibility in everything we do - now and for the future. About The Job We are seeking a motivated and detail-oriented Estimator / Engineer to join our team. In this role, you’ll take ownership of estimating and preconstruction activities for a variety of projects, from early design through bid submission. You will be responsible for preparing detailed quantity takeoffs, developing cost estimates, analyzing drawings and specifications, and coordinating with internal teams, subcontractors, and suppliers to ensure accurate and timely project deliverables. You will be responsible to help develop technical proposals and schedules. You will play a critical role in bridging estimating, engineering, and field operations — helping to translate conceptual designs into constructible, cost-effective solutions. This position is ideal for professionals ready to advance beyond entry-level work, with a solid foundation in construction and a growing ability to manage portions of bids and preconstruction tasks independently. Qualifications • Bachelor’s degree in Engineering or Construction Management (Engineering preferred)., • 5–7+ years of experience in construction estimating, project engineering, or preconstruction., • Strong understanding of construction means, methods, and materials., • Experience with Bluebeam, CADD software, and estimating tools such HeavyBid, or equivalent platforms., • Proficient in Microsoft Excel and Word; strong analytical and organizational skills., • Ability to work independently while collaborating effectively within a team environment., • Excellent written and verbal communication skills., • Willingness to travel to project sites as needed. You'll Thrive with Us if You Are • Driven by a desire for continuous learning and personal growth, always striving to improve., • Able to take the initiative and work harmoniously with others, • Committed to embodying Citnalta's values of integrity, professionalism, and inclusion in everything you do. What You'll Love About Working With Us • Work on exciting, impactful projects that push boundaries and shape the future of construction and infrastructure., • Hands-on training and mentorship from senior staff, • Opportunity for growth in both engineering and estimating tracks, • Employer Paid Medical, Dental, and Vision Insurance, • Employer Funded HRA, • 401(k), • Paid Holidays, • Paid Time Off, • Tuition Reimbursement At Citnalta, we are committed to fostering a diverse and inclusive workplace. We provide equal employment opportunities to all employees and applicants, and make all employment decisions, including hiring, compensation, promotion, benefits, training, and termination, without regard to race, color, age, sex (including pregnancy, sexual orientation and gender identity), national origin, ancestry, religion, disability, military or veteran status, marital status, genetic information, arrest or conviction record, or any other characteristic protected under federal, state, or local law.

Assistant Project Manager Job Summary We are seeking a dedicated, organized, and efficient assistant project manager to join our team. In this role, you will work with the project manager to coordinate and accomplish the necessary project tasks and requirements. Candidate must have an eye for detail and a go-getter personality, ready to help synchronize all the project elements and make them operate successfully. Assistant Project Manager Job Duties and Responsibilities • Be a voice in the strategic planning phase of upcoming projects, • Assist the project manager in the execution of the management plan for assigned projects, • Help coordinate and manage the project from inception to completion, • Review project designs and contributes ideas for cutting costs, • Carry out daily operational tasks in an effective and timely manner, • Facilitate communications between office and field staff, • Track and directly report project status updates to project manager, • Help problem-solve issues and suggest ways to improve the project, • Organize, file, and maintain all current project documents, • Enter information into and manage the digital project databases, • Assist in ensuring compliance with necessary specifications, • Help create, manage, and maintain the project budget, • Coordinate and execute daily administrative tasks, • Schedule and confirm deliveries to field staff, • Help create and adhere to project timeline and calendar, • Schedule meetings, phone calls, site visits, etc., • Consult with and gather information from technicians, engineers, contractors, etc., • Maintain positive vendor and client relationships, • Ensure project adheres to a set schedule and is meeting the goals of the clientAssistant Project Manager Requirements and Qualifications, • Bachelor’s in business management or related field preferred, • 2+ years of experience in project management or as an administrative assistant, • Knowledgeable in our specific field, • Proficient in Microsoft Suite and other management software, • Organized and detail-oriented, • Skilled collaborator, • Excels in a high-paced work environment, • Strong communication skills both oral and written, • Ability to multi-task effectively, • Focused and supportive to management at all times, • Self-starter who works well independently, • Adaptable and calm under pressure, • Expert problem solver Benefits: • Health insurance, • Dental insurance, • Vision insurance, • Retirement plan, • Paid time off Job Type: Full-time Pay: $60,000.00 - $120,000.00 per year Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Work Location: In person

GSE Dynamics, Inc., a full-service engineering and manufacturing company located in Hauppauge, NY, is seeking a Manufacturing Engineer in the Engineering Department who is organized, detail oriented and possesses strong interpersonal skills. \n Summary: \n The Manufacturing Engineer will be responsible for evaluating, designing, and implementing efficient production methods and processes. The role focuses on improving operational efficiency, quality control, and overall productivity. The successful candidate will work closely with design, production, and quality teams to ensure the most effective and innovative production strategies are applied. \n Reports to: Director of Manufacturing Planning \n Duties include: \n\n • Analyze and design efficient production processes for manufacturing systems.\n, • Develop and implement process improvements to reduce production time, cost, and waste.\n, • Create and maintain process documentation, including work instructions, procedures, and flowcharts.\n, • Collaborate with the engineering and production teams to ensure proper integration of new methods into existing systems.\n, • Conduct time studies, process optimization, and line balancing to enhance productivity.\n, • Identify potential issues or bottlenecks in production and propose corrective actions.\n, • Develop and support the introduction of new tools, technologies, and equipment to improve production processes.\n, • Ensure compliance with industry standards, safety regulations, and quality requirements.\n, • Assist in the design and layout of production lines, workstations, and facilities.\n, • Conduct root cause analysis for problems related to manufacturing efficiency or quality.\n, • Provide training and support to operators and production staff on new methods or procedures.\n, • Monitor and report on key performance indicators (KPIs) related to production efficiency, cost reduction, and product quality.\n, • Proven experience in a manufacturing or production environment, ideally as a Methods Engineer or in a similar role.\n, • Strong understanding of production processes, lean manufacturing principles, and process improvement techniques (such as Six Sigma, Kaizen, etc.).\n, • Experience with process mapping, time studies, and work measurement.\n, • Proficient in using CAD software, manufacturing simulation tools, and ERP systems.\n, • Excellent problem-solving, analytical, and troubleshooting skills.\n, • Strong communication and teamwork abilities.\n, • Experience in aerospace and defense industry\n, • Certification in Lean Manufacturing, Six Sigma, or other process improvement methodologies.\n, • Process Improvement, Production Systems Design, Manufacturing Technologies\n, • CAD and Simulation Tools, ERP Systems, Problem Solving, Data Analysis, \n, • Project Planning, Budgeting and Cost Management and Cross Functional Collaboration\n

We are seeking a Purchasing Specialist for a 6-8 week assignment! This Jobot Consulting Job is hosted by: Melissa Todd Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. Salary: $30 - $34 per hour A bit about us: A leading national distributor is seeking an experienced Purchasing Specialist for 6-8 weeks. This role is perfect for someone who thrives in a fast-paced environment, enjoys vendor coordination, and brings strong analytical and organizational skills to the table. Why join us? • Collaborative team culture, • Opportunity to work with well-known brands in the beauty and professional products industry Job Details Job Details: We are currently seeking a dynamic and experienced Consulting Purchasing Specialist for a temporary role. This role is integral to our organization as it is responsible for developing and implementing purchasing strategies, managing daily purchasing activities, and ensuring that all purchasing agents are meeting their personal performance standards. The successful candidate will be responsible for the entire lifecycle of a product, from acquisition through the distribution phase. This is a fantastic opportunity to contribute to a fast-paced team, in a rapidly growing industry. Responsibilities: 1. Develop, hone, and execute new improved procurement strategies across all channels of purchasing., 2. Manage every aspect of the purchasing process from supplier selection, contract negotiation, through product delivery., 3. Evaluate and enhance our operations in local spend while researching and prospecting developments in global sourcing., 4. Build and maintain relationships with key suppliers and vendors, negotiate and improve costs and terms with suppliers, review and analyze cost proposals and conduct market analysis for contract negotiations., 5. Monitor and predict potential new suppliers on national and international levels., 6. Perform cost analysis and set appropriate benchmarks., 7. Coordinate with inventory team, management, and stockroom as required., 8. Assess, manage and mitigate risks in procurement process., 9. Oversee distribution of supplies in the organization. Qualifications: 1. Bachelor's degree in Business Administration, Supply Chain Management, or a related field., 2. Minimum of 5 years of experience in a similar role within the sales industry., 3. Proven history of managing supply chain procedures., 4. Strong knowledge of sourcing & procurement techniques as well as an aptitude for reading the market., 5. Demonstrable experience in negotiating and networking., 6. Solid knowledge of supplier or third-party management software., 7. Experience in collecting and analyzing data., 8. Outstanding organizational skills., 9. Excellent verbal and written communication skills., 10. Ability to work independently and handle multiple projects., 11. Proficiency in Microsoft Office Suite and purchasing software., 12. Exceptional ability to conceptualize large-picture projects and foresee challenges and needs to be addressed., 13. Experience in distribution is a must. We are looking for a professional who is highly motivated, a problem solver, and a team player. If you are ready to take your Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

NOT IT RELATED LHH Recruitment Solutions has an opening for a Project Administrator for our client in the Bohemia, NY area. This direct hire role allows you to expand your project management career within a state-of-the-art technology organization. You will be responsible for the execution and oversight of multiple projects, throughout the entire project execution cycle, according to published scope of work and project definition. Candidates should have experience in capital equipment system projects, financially and commercially, from receipt of purchase order through customer acceptance. This on-site role requires a minimum of three-years current experience in project management experience in a project administration role for a technological manufacturing organization. Prior experience working in the x-ray or non-destructive testing (NDT) market HIGHLY preferred. Candidates MUST have experience in preparing and submissions of technical and formal engineering reporting. Salary range estimation: $75,000-$100,000.00 annually. RESPONSIBILITIES: • Primary point of contact for customer and fully responsible for the oversight of customer expectations, communication, and client satisfaction., • Thoroughly review all customer commercial terms and conditions and manage any possible and occurring deviations to ensure all terms are acceptable to both organizations and parties involved., • Ensure project designs and deliverables meet the defined scope of work, technical proposal outlines and/or customer specifications., • Collaborate with multiple teams to develop and implement a budget and schedule for each and every project., • Monitor task completion, purchasing and material control to ensure all completed according to schedule and budget., • Raise red flags for all deviances, possible or occurring., • Manage all project subcontractors, fabricators, vendors in accordance with project SOW., • Manage schedules and budgets aligned with customer requirements., • Prepare weekly reports for management/stakeholders to summarize progress of project execution against budget and schedule including variances and red flags noted., • Work with sales team pre and post-sale to fully understand project scope and pricing., • Interact with a cross-disciplinary engineering team, operations team, installation team and sales team to ensure proper management, execution and completion of project according to defined budget and schedule., • Travel to customer sites worldwide to participate in concept and technical discussions, kick off meetings, oversee installations, or to ensure maintenance of a positive customer relationship. Global travel up to 20% of the time with potential travel to India, China, and France. REQUIREMENTS: • Proficient in SolidWorks., • Proven proficiency in MS Office Suite and MS Project., • Candidates MUST have experience in preparing and submissions of technical and formal engineering reporting., • Must have minimum five (3) years of project management experience with at least two (2) years of concentration on budgeting, cost management and commercial terms oversight., • Should have experience managing capital equipment projects., • Experience working with an ERP or MRP system – MS Dynamics highly preferred., • Proven proficiency in establishing, negotiating, and monitoring commercial terms and conditions., • Must be able to thrive in a fast paced, demanding environment and able to quickly assess project status and take appropriate action to control and maintain project scope, schedule, and budget., • Proven capability of effectively communicating both internally and externally using all available methods of communication., • Prior experience in a QA controlled design environment. (ISO 9000, NQA-1, or similar), • Understanding or prior experience working in the x-ray or non-destructive testing (NDT) market HIGHLY preferred., • Fluency in multiple languages a plus. Health insurance, dental insurance and life insurance are offered with this full-time direct hire role. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance

JSG is hiring a Software Engineer in Hauppauge, NY. Must be a US Citizen and work onsite. Salary range: $127K-$137K - Bonus Our charter is to develop fuel measurement, management and inserting systems for commercial and defense airframers. The Software Engineering team works closely with the Systems and Electronic Hardware Engineering teams to develop, qualify and certify these technologies as products for our customers in aerospace and industrial markets. • Develop embedded software using C and/or model-based tools such as SCADE, • Develop high level and low level software requirements, • Create requirements-based test cases and verification procedures, • Perform software integration testing on target hardware using both real and simulated inputs/outputs, • Analyze software requirements, design and code to assure compliance to standards and guidelines, • Perform traceability analysis to customer specification requirements to software code, • Participate in software certification audits, e.g. stages of involvement (SOI), • BS in Software Engineering, Computer Engineering, Computer Science or related field, • 5+ years of experience performing software development, verification and/or integration, • Strong technical aptitude with analytical and problem-solving capabilities, • Excellent interpersonal and communication skills, both verbal and written, • Ability to work in a team environment, cultivate strong relationships and demonstrate initiative, • Experience with C programming language, • Experience with model-based software development using SCADE, • Experience developing embedded software control systems, • Experience planning and executing projects using Agile software development methodology, • Experience managing requirements using DOORS or DOORS Next Gen (DNG), • Experience with digital signal processing or digital filter design, • Experience with ARM microprocessors, • Experience with serial communication protocols (e.g. CANbus, ARINC, RS-232), • Familiarity with aerospace (e.g., DO-178, DO-330, DO-331) and/or industrial (e.g., IEC 61508) software certification requirements, • Familiarity with functional safety standards such as ISO 13489, IEC 61508, IEC 62061, ISO 26262 or ARP4761Software Engineer to join our team. We are looking for a candidate who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle., • Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Job Responsibilities: • Oversee day-to-day operations of the Interior Construction division, ensuring all projects align with company objectives and client expectations., • Lead planning and execution of tenant build-outs, refresh programs, remodels, and brand conversions for national commercial clients., • Direct project teams in scheduling, permitting, budgeting, procurement, and closeout documentation., • Collaborate with clients, architects, and subcontractors to ensure project success and quality standards., • Develop and manage annual budgets, cost tracking, and gross profit margin targets., • Monitor project performance metrics (schedule adherence, profitability, and quality)., • Support bid development and proposal processes in partnership with the VP of Construction and Sales teams., • Ensure adherence to safety regulations and building codes throughout all projects., • Promote professional growth, mentoring, and accountability across project management staff., • Coordinate with the Exterior Construction Director for cross-functional alignment on blended projects. Proficiencies: • Strong leadership and people management skills, • Comprehensive understanding of interior construction trades and project sequencing, • Financial and budget management expertise, • Proficiency with scheduling and project management software (e.g., MS Project, Procore), • Excellent communication and negotiation abilities, • Strong organizational and analytical skills, • Ability to thrive in a fast-paced, deadline-driven environment Supervisory Requirements: This position does have supervisory responsibility for Project Managers, Assistant Project Managers, and support staff within their division. Education/Experience: Bachelor’s degree in Construction Management, Engineering, Architecture, or a related field is preferred. Minimum of 10 years of commercial construction experience, including at least 5 years in a leadership capacity overseeing interior build-outs or remodels. To perform this job successfully, an individual should have basic skills in a work management system, proficiency in MS Office skills, and the willingness to expand their knowledge. Work Environment/Physical & Visual Demands: Reasonable accommodation may be provided to enable individuals with disabilities to perform essential functions. • This position works a standard Monday–Friday schedule, with flexibility for travel, site visits, or after-hours project needs. Work is performed in both office and field environments with frequent communication with clients, subcontractors, and internal teams. Flexibility is required., • Physical Demands: Speaking, Listening, Writing, Sitting, Keystroke, Crouching, Kneeling, Reaching, Standing, Walking, Pushing, Pulling, Finger movement, Squatting, Grasping, Repetitive Motion, and Sedentary/ Light work, Climbing, requiring lifting up to 20lbs or up to 50lbs with assistance., • Visual Demands: Visual acuity to perform activities such as viewing a computer terminal and reading., • Environment Conditions: This position is subject to sufficient noise with an indoor environmental condition; protected from weather conditions, but not necessarily from temperature changes

Senior Verification Engineer to support verification and validation of complex FPGA-based systems for aerospace, defense, and space applications. This role focuses on FPGA verification (VHDL/Verilog), simulation, test strategies, protocols, and certification activities. Position Summary The Senior Verification Engineer will develop verification plans, build testbenches, run simulations, and ensure first-pass success of FPGA designs. You will work closely with design, hardware, and software teams while supporting certification and documentation requirements.

Competitive pay / Flexible hours - As a Data Entry Operator at Axion Data Services, you will: Enter data accurately and efficiently into various computer systems; Verify the accuracy and completeness of data entered; Utilize various software programs and tools to enter, update, and manipulate data;

As a Warehouse Clerk at Amazon, you will be responsible for maintaining accurate records of all inventory and ensuring that the warehouse operates smoothly. Previous experience in a warehouse or administrative role preferred. Proficient in Microsoft Office Suite and warehouse management software.

LHH Recruitment Solutions has an opening for a Project Administrator for our client in the Bohemia, NY area.This direct hire role allows you to expand your project management career within a state-of-the-art technology organization.You will be responsible for the execution and oversight of multiple

At CAMP Systems, we are the trusted leader in aircraft compliance and health management, proudly serving the global business aviation industry.With over 20,000 aircraft and 33,000 engines supported on our cutting-edge platforms, and partnerships with more than 1,300 maintenance facilities and parts

JSG is hiring a Software Engineer in Hauppauge, NY.Must be a US Citizen and work onsite.Salary range: $127K-$137K - Bonus.Our charter is to develop fuel measurement, management and inserting systems for commercial and defense airframers.The Software Engineering team works closely with the Systems an

North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies.Our products and services are used by the military, aerospace, and industrial markets, helping to advance tec

JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. Strong technical ap

North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies.Our products and services are used by the military, aerospace, and industrial markets, helping to advance tec

Comfortable working with computers, CRM software, and customer support tools.

Applications are only accepted through our applicant tracking system and only accept personal identifying information through that system. Our Talent Acquisition team will not ask for you to provide personal identifying information via e-mail or outside of the system.

We are looking for a candidate who has working experience leading a software project team, designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (s

You will work closely with product managers, designers, and other developers to create seamless, performant, and highly scalable solutions. Perform code reviews and mentor junior developers to ensure coding standards are met. Work collaboratively with cross-functional teams including product manager

Competitive compensation - As a Data Entry Typist you'll: Gather and organize the material from which you will work; Type memorandums, reports, and other documents using stipulated word processing software; Prepare work in accordance with prescribed formatting guidelines; Proofread assignments and a

Oversight of purchasing, acquisition, inventory, and disposition of hardware and software for infrastructure. Oversight of the implementation of new applications and changes to existing computer systems and software packages. The Assistant Vice President of Infrastructure serves as a member of the D

Competitive pay - As a Data Entry Typist at Clearpath Counseling and Consulting, LLC, you will: Enter data accurately and efficiently into various databases and systems; Utilize software programs and tools to ensure data integrity and completeness; Review and verify information for accuracy and comp

The Automation Specialist represents a cross-section discipline requiring proportional knowledge in hardware and software development and their applications.

A leading semiconductor solution provider is seeking a Senior Staff Engineer for CI/CD System Development in Greenlawn, NY.This role involves leading global teams to enhance CI/CD products and ensuring software quality through Agile practices.Candidates should possess strong leadership and DevOps sk

Controller – Construction Industry Location: On-site, M–F, 7:30 AM – 4:00 PM (some flex) Our client, a well-established union construction company, is seeking an experienced Controller to join their team. This role is fully on-site and offers a professional environment, strong leadership, and opportunities for long-term growth. Key Responsibilities: • Manage all aspects of construction accounting, including AIA billing, payments, and continuation applications, • Process Union payroll, certified payroll including taxes and correspondences to union shop., • Collaborate with project managers on billing, expenses, and job costing, • Oversee reconciliations and ensure accurate financial reporting, • Bachelor’s degree in Accounting or specific union construction experience, • 5+ years of accounting experience within a construction company environment, • Strong knowledge of AIA billing and construction project accounting We are an equal opportunity employer and comply with all applicable federal, state, and local fair employment practices laws. We strictly prohibit and do not tolerate discrimination against employees, applicants, or any other covered persons because of race, color, religion, creed, national origin or ancestry, ethnicity, sex, sexual orientation, gender (including gender identity and expression), marital or familial status, age, physical or mental disability, perceived disability, citizenship status, service in the uniformed services, genetic information, height, weight, or any other characteristic protected under applicable federal, state, or local law. Applications from members of minority groups and women are encouraged. #Acct Pay:$110,000.00 - $120,000.00

Our charter is to develop fuel measurement, management and inerting systems for commercial and defense airframers. The Software Engineering team works closely with the Systems and Electronic Hardware Engineering teams to develop, qualify and certify these technologies as products for our customers i

Uses status as a knowledge leader in software design and functional knowledge across multiple engineering disciplines and program management to provide technical leadership to a given program. Initiates cross-company collaboration and develops positive relationships with other engineering discipline

Up to $65K per year - As a Customer Experience Specialist at Blueprint, you will: Communicate effectively with customers via phone, email, and chat to provide exceptional customer service and address any inquiries or concerns they may have; Utilize company software and resources to accurately and ef

Trescal is a growing company, looking for new talent to join our organization! We are the premier independent calibration, repair, and asset services provider in the U.S. We provide our customers single-source, cost-effective, best-in-class solutions. Our team is comprised of talented professionals who excel at providing industry leading calibration, repair and asset management services to our customers. As an employee at Trescal, you will join a people-centric company with an incredible culture. We encourage new ideas and suggestions in order to continue to offer both customers and employees the services and benefits in a dynamic, global marketplace. We value teamwork, integrity, quality, innovation, and dynamic engagement. Does Trescal sound like the place for you? Then join our team! The RF Technician is responsible for providing calibration services for test equipment primarily in the field of RF and Electrical metrology. Responsibilities: \n • Performs customer support activities either in-house or on-site involving the calibration and certification of RF Test and Measurement equipment utilizing a variety of automated calibration systems\n, • Interact directly with customers directly \n, • Follows established policies and procedures in conducting on-site or in-house repair and calibration of equipment to ensure it meet high standards of performance\n, • Diagnoses equipment malfunctions and performs repairs\n, • Represents the company in a customer support role and is responsible for customer's satisfaction with equipment and servicing\n, • Perform other duties as assigned \n\n Requirements \n • Military training or experience (PMEL OR TMDE OR Electronics) ' OR an Associates Degree in Electronics (or related technical field); OR equivalent work experience & training.\n, • Minimum of 5 years of calibration experience.\n, • Experienced in calibrating several disciplines of test and measurement equipment such as:\n, • Electronic\n, • RF Microwave\n, • Temperature\n, • Strong communication skills including written, verbal and listening skills.\n, • Proficient computer skills including but not limited to Microsoft Office (Word & Excel), Internet research, data entry, etc.\n, • Experience in interacting with customers in a courteous and professional manner and providing an excellent customer experience.\n, • And we would prefer:\n, • Knowledge of ANSI / NCSL Z-540-1, ISO 9000, and ISO/IEC 17025\n In addition, we offer paid time off, a 401k plan, career development opportunities, referral bonuses, and a competitive benefit package, including these company paid benefits: \n • Dental\n, • Vision\n, • Employee Assistance Program\n, • Basic Life/AD&D Insurance\n, • Long Term Disability Insurance\n #INDTUS

Dimensional Metrology Specialist • US Citizenship is required for this role * If you're ready for the challenge of working for a dynamic organization, Dayton T. Brown, Inc. has a career opportunity available for a full-time motivated Dimensional Metrology Specialist to join our growing Engineering and Test Division. Our three divisions, Engineering and Test, Technical Services, and Mission Systems make DTB a diverse and interesting place to work. Dayton T. Brown, Inc. is a premier leader as an independent testing laboratory providing testing and engineering services. Our extraordinary testing services are performed in one location at our 500,000+ square ft. laboratory. We support customers across all platforms and services in the military, aerospace, shipboard, railway, weapons manufacturers, automotive and consumer industries worldwide. The ideal candidate will specialize in Metrology, quality assurance, and manufacturing methods. Responsibilities include, but are not limited to: \n • Apply GD&T principles to inspection and measurement processes\n, • CMM programming (experience with Quindos software is a plus)\n, • Operate and maintain Faro Arm CMMs, utilizing CAM2 software (Verisurf experience is optional)\n, • Generate quotes and collaborate with the sales team on new business opportunities\n, • Interface with Metallurgical and Non-Destructive testing personnel\n, • Prepare technical summaries and justification of dimensional results if required\n, • Collaborate with machine shop personnel on in-process and final inspection documentation\n, • Prioritize programs, manage time effectively, and adhere to budgets\n, • Perform measurements using manual equipment such as Height Gauges, Micrometers, Surface Roughness equipment and Thread Gauges.\n, • 4 years of dimensional and manufacturing experience\n, • Knowledge of Inventor or similar\n, • Strong written and verbal communication skills, with a focus on customer service\n, • Excellent interpersonal skills and willingness to collaborate in a team environment\n, • Exceptional organizational skills and attention to detail\n, • Ability to work in a fast-paced environment with strict deadlines \n, • Experience managing commercial and government programs for First Article and Production Lot Testing\n, • Ability to work in other areas when slow including machine shop\n, • Engineering degree a plus\n, • Experience in AS9100 quality standards\n, • CNC and manual machining experience a plus\n, • Competitive salaries\n, • Tuition Reimbursement at up to 100%\n, • Medical/Dental/Vision/FSA\n, • 401k with company matching\n, • Paid Time off\n, • Group Life Insurance\n, • Employee activities\n, • A family-friendly work culture\n, • Cash incentives and recognition awards\n\n Dayton T. Brown, Inc. is an equal opportunity employer - Veterans and Disabled.

Managing relationships with logistics service providers and addressing any issues or concerns. Providing training and guidance to logistics team members, ensuring they are fully equipped to perform their roles effectively. Strong knowledge of logistics and inventory management software.

Job Title: Warehouse Associate Employer: Amazon. As a Warehouse Associate at Amazon, you will play a crucial role in ensuring the timely and accurate processing of customer orders. You will utilize state-of-the-art technology, including handheld scanners and warehouse management software, to perform

Coordinate with subcontractors, vendors, and site crews to maintain project flow. Proficiency with project management software and Microsoft Office Suite. Assist with project documentation, submittals, RFIs, change orders, and progress reports.

Job Description Full-time career opportunity for a Senior Engineer to design and implement high-performance digital systems using VHDL. This role involves FPGA-based design, validation, troubleshooting, and collaboration with cross-functional teams. Key Responsibilities: • Lead design, development, and optimization of digital circuits/systems using VHDL., • Verify and validate designs through simulations and testing., • Collaborate with architects, hardware, and software teams to define requirements and solutions., • Debug and optimize FPGA hardware/software interactions., • Document design processes and results., • Plan and manage development schedules and resources., • Mentor junior engineers and promote best practices., • Bachelor's or Master's in Electrical/Computer Engineering., • 8–15 years of digital design experience with FPGA projects., • Proficiency in VHDL and FPGA design tools (Xilinx, Altera)., • Experience with PCIe, Ethernet (1G/10G), TSN, and system-level design/verification., • Strong knowledge of FPGA architectures, high-speed design, and DO-254 certification processes., • Excellent problem-solving, communication, and teamwork skills. Well-established, stable company. Long-term projects featuring great technology. They are a great group of people to work with.

Job Description Software Developer (C#/.NET) - Long Island, NY ONSITE WORK REQUIRED Schultheis & Panettieri, LLP has a full time opening for a mid-level .Net Programmer/Developer. We are currently recruiting an energetic, detailed-oriented, and motivated Software Developer with in-depth knowledge of C# .NET. This person will be developing desktop and web-based software products that will encompass heavy front-end and back-end development. We are looking for someone who is self-directing, loves learning, and enjoys collaborating on tough challenges. Responsibilities • Responsible for writing the code (or modules) independently for in-house applications., • Carry out the debugging and troubleshooting of all programs., • Develop applications based on functional specifications., • Identify and communicate technical problems/solutions., • Create basic user manuals to be used by the end users., • Works well in a team., • Solves problems effectively., • Performs well under stress., • Great attention to detail., • Good math skills., • Excellent communication skills., • Creative thinker., • Adapt to a variety of situations., • Solid understanding of Object-Oriented Programming (OOP)., • Minimum 3-5 years application development and integration experience using Microsoft technologies (e.g., C#,.Net Core, WinForms, LINQ, SQL Server, T-SQL, Visual Studio)., • SAP Crystal Reports experience., • Working knowledge of Telerik Controls for .Net applications., • Experience with source control tools like TFS and Azure DevOps., • Strong business analysis/needs assessment skills; must be comfortable and effective working directly with end users., • Strong customer service skills; able to resolve requests professionally and effectively in a high volume and fast paced environment, while interacting with other IT Department staff, business users, and senior management. Please submit salary requirements to be considered. If you love to code and have strong supporting skills, we'd love to hear from you! We provide an excellent work environment and excellent benefits. Benefits • Medical, • Pension, • 401(k), • Life Insurance, • Long Term Disability Insurance, • Flexible Spending, • Voluntary Dental, • Voluntary Vision, • Sick Days, • Vacation, • Flexible schedule

Job Description Embedded Senior Software Engineer – Aerospace/Industrial • Location: Central Islip, NY, • Employment Type: Permanent, Full-Time, • Shift: 1st Shift, Monday–Friday (flexible), • Compensation: $127,000–$137,000 + 12.5% annual bonus, • Work Arrangement: 100% onsite, • Citizenship Requirement: Must be a U.S. Citizen, • Job ID: bh18176 About the Role A highly respected engineering organization in the fluid systems space is seeking a Senior Embedded Software Engineer to lead and execute critical development projects for advanced measurement and control technologies used in aerospace and industrial applications. This is a great opportunity for an engineer who thrives in a regulated environment and enjoys seeing a project through from concept to completion. If you’re an embedded software engineer who loves hands-on development, tackling complex technical challenges, and partnering closely with systems and hardware teams, this role offers long-term career growth and impactful work. What You’ll Do This role is split approximately 75% software development and 25% project leadership, including owning full project lifecycle execution. Responsibilities include: • Develop embedded software in C and/or model-based tools such as SCADE, • Create high-level and low-level software requirements, • Develop requirements-based test cases and verification procedures, • Conduct software integration testing on target hardware using real and simulated I/O, • Analyze requirements, design, and code to ensure compliance with industry standards, • Perform traceability analysis from customer specifications to software implementation, • Participate in formal certification audits and regulatory reviews, • Collaborate closely with Systems and Hardware Engineering teams, • Lead assigned projects from planning through execution Required Qualifications • Bachelor’s degree in Software Engineering, Computer Engineering, Computer Science, or a related discipline, • 5+ years in embedded software development, verification, or integration, • Prior experience working in a regulated environment (Aerospace, Industrial, Automotive, Medical, Rail, etc.), • Strong proficiency with embedded systems and microcontrollers, • Excellent analytical, communication, and problem-solving skills, • Demonstrated ability to lead and execute projects end-to-end, • Must be a U.S. Citizen for site security requirements, • Ability to work 100% onsite in Central Islip, NY Highly Preferred Experience • Strong hands-on experience with C programming, • Model-based development using SCADE, • Embedded control system development, • Agile project planning and execution, • Requirements management tools (DOORS / DOORS Next Gen), • Digital signal processing or digital filter design, • ARM microprocessor experience, • Familiarity with serial communication protocols (CANbus, ARINC, RS-232, etc.), • Knowledge of software certification standards such as:, • DO-178, DO-330, DO-331, • IEC 61508, ISO 26262, EN 50128, • Functional safety frameworks (ARP4761, ISO 13489, IEC 62061, etc.) Why Consider This Opportunity? This employer offers an extremely competitive benefits package, including: • Comprehensive medical, dental, vision, and prescription coverage, • 401(k) with 100% match on the first 5%, • Company-funded retirement contributions (3% annually), • Paid parental leave and adoption assistance, • Tuition reimbursement and professional development support, • Paid Time Off + 13 paid holidays, • Additional voluntary benefits (legal, identity protection, pet wellness, etc.), • Short-term and long-term disability at no cost How to Apply If you have strong embedded software experience in a regulated environment and enjoy leading technical projects, I’d love to speak with you! Company DescriptionConnexion Systems & Engineering is a full-service staffing firm, whose mission is to provide "best in class" staffing services to our clients and job seekers alike. We strive to achieve excellence in staffing, job placement and recruiting services, while treating our clients, employees, and candidates with the professionalism and respect they deserve.Connexion Systems & Engineering is a full-service staffing firm, whose mission is to provide "best in class" staffing services to our clients and job seekers alike. We strive to achieve excellence in staffing, job placement and recruiting services, while treating our clients, employees, and candidates with the professionalism and respect they deserve.

Job DescriptionSUMMARY: Parker Fluid Systems Division (FSD) is seeking an Embedded Senior Software Engineer to join our team. We are looking for a candidate who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle. FUNCTIONS: Our charter is to develop fuel measurement, management and inerting systems for commercial and defense airframers. The Software Engineering team works closely with the Systems and Electronic Hardware Engineering teams to develop, qualify and certify these technologies as products for our customers in aerospace and industrial markets. The individual will have the following responsibilities (not an inclusive list): • Develop embedded software using C and/or model-based tools such as SCADE, • Develop high level and low level software requirements, • Create requirements-based test cases and verification procedures, • Perform software integration testing on target hardware using both real and simulated inputs/outputs, • Analyze software requirements, design and code to assure compliance to standards and guidelines, • Perform traceability analysis to customer specification requirements to software code, • Participate in software certification audits, e.g. stages of involvement (SOI) REQUIRED: • BS in Software Engineering, Computer Engineering, Computer Science or related field, • 5+ years of experience performing software development, verification and/or integration, • Strong technical aptitude with analytical and problem-solving capabilities, • Excellent interpersonal and communication skills, both verbal and written, • Ability to work in a team environment, cultivate strong relationships and demonstrate initiative, • Need Embedded SW developer from a Regulated Environment - MUST HAVE HIGHLY PREFERRED: • Experience with C programming language, • Experience with model-based software development using SCADE, • Experience developing embedded software control systems, • Experience planning and executing projects using Agile software development methodology, • Experience managing requirements using DOORS or DOORS Next Gen (DNG), • Experience with digital signal processing or digital filter design, • Experience with ARM microprocessors, • Experience with serial communication protocols (e.g. CANbus, ARINC, RS-232), • Familiarity with aerospace (e.g., DO-178, DO-330, DO-331) and/or industrial (e.g., IEC 61508) software certification requirements, • Familiarity with functional safety standards such as ISO 13489, IEC 61508, IEC 62061, ISO 26262 or ARP4761Software Engineer to join our team., • We are looking for a candidate who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle.

Job Description Embedded Software Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This role is responsible for developing optimized software to support the prototypes of integrated x-ray sources and high voltage generators. Job Description • Design and create requirement specifications for the Microcontrollers to be used in High Voltage power supply designs, • Test units, integration of firmware and GUI (Graphical User Interface) changes, • Maintain Software Version Control (SVN) and release management systems, • Provide documentation for third party integration into the firmware and customer support to debug software issues, • Program Data Acquisition based GUI’s using serial communication (RS232) and Ethernet Communication (TCP/IP) protocols, • Work with cross-functional team to design and develop new products and improve existing designs, • Safety Sensitive Position Essential Skills • Bachelor’s Degree or higher in Electrical and/or Computer Engineering, • Demonstrated ability to write firmware for industrial control equipment, • Minimum of two (2) years of experience with NI, LabVIEW, Microsoft Visual Studio C++/VB/C#, Embedded C and RTOS, • 2-3 years of experience with Freescale products (MC56F8037 7 ARM) microcontrollers, • Ability to work with Analog and Digital Circuits based PCB designs like Op Amps, ADC, DAC & multi-functional IC’s, • Knowledge of RS-232 and TCP/IP communication standards, • Proficient in Microsoft Office Suite, • Perform software development and version control adhering to SCRUM standard, • Proficiency in the English language with well-established written and verbal communication skills, • Must be a highly organized, self-motivated, team player, • Collaboration and creative thinking skills, • Knowledge of radiographic imaging systems for industrial and medical inspection, • Strong background in understanding x-ray tube design of high voltage generators to power up X-ray sources, • Prior experience developing wireless security protocols Physical & Mental Demands: • Regularly required to sit, walk, bend, stoop and stand within an industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and possibly operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone, via email and on other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and/or by air. Overnight stays may also be required., • On a regular basis, will be required to:, • use written and oral communication skills, • read and interpret data, information and documents, • be creative, make judgements, use reasoning and make decisions, • observe and interpret situations, • learn and apply new information or skills, • perform detailed work on multiple, concurrent tasks, • work under intensive deadlines with frequent interruptions, • interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels

Technical Support/IT Specialist/desktop support (Onsite). Coordinate with third-party vendors for escalations and hardware replacements. Document issues and resolutions in the IT service management system (ServiceNow, Remedy, etc.

As the industry’s leading expert in embedded processing with unmatched quality and system‑level know‑how, we have evolved to provide scalable and comprehensive semiconductor solutions for automotive, industrial, infrastructure, and IoT industries based on the broadest product portfolio, includ

We are a top GC on Long Island looking to expand our team! We focus on mid-sized public works projects.All work is local and we provide to salary and benefits packages! If you are interested in learning more, please apply today.Great salary and benefits package.Ability to use construction software p

This position requires access to technology, material, software or hardware that is controlled by export laws of the US. He/she will be responsible for items such as building part test setups, qualification testing, making of production test jigs, developing test routines, test software and test aut

Job Description Pay: $20.00 - $26.00 per hour Job description: Seeking a compassionate and skilled Medical Assistant to support in providing high-quality care in an OB/GYN specialty role. This role requires excellent communication skills, empathy, and the ability to manage clinical and administrative tasks in a fast paced healthcare setting. Responsibilities • Greet patients and their families, obtaining relevant medical histories and current symptoms., • Measure and record vital signs such as height, weight, temperature, and pulse., • Assist pediatricians and nursing staff during examinations and minor procedures, including preparing patients and setting up equipment., • Collect laboratory specimens (e.g., throat, urine cultures, blood via venipuncture)., • Administer immunizations and vaccinations under supervision, complying with NY State regulations., • Maintain accurate and up-to-date patient records using electronic health records (EHR) systems., • Perform clerical duties including scheduling appointments, answering phones, and managing paperwork., • Keep exam rooms stocked, clean, and organized to ensure efficient clinical workflow., • High school diploma or equivalent required; completion of an accredited Medical Assistant program preferred., • Certification as a Medical Assistant (e.g., CMA, RMA) is preferred but not always required., • Prior experience working in an OB/GYN clinical setting strongly preferred., • Knowledge of pediatric growth and developmental milestones, vital sign norms, and EKG placement is advantageous., • Proficiency with EHR software and basic office technology., • Strong interpersonal and communication skills, especially with children and families., • Ability to perform phlebotomy and other specimen collection techniques confidently., • Compliance with New York State regulations governing medical assistants’ scope of practice. Location - Bohemia, NY Job Type: Full-time Work Location: In person

Job Description Join our dynamic team at Richmond County Ambulance Service as an EMT- Emergency Medical Technician! This exciting position is perfect for new EMTs looking to jumpstart their career in the transportation industry. As an EMT, you will play a vital role in providing life-saving care to our community. At Richmond County Ambulance Service, we value customer-centricity, excellence, integrity, and safety. We pride ourselves on our professional and flexible company culture. As an EMT, you will have the opportunity to showcase your skills and make a difference in people's lives every day. This position is onsite, allowing you to be at the forefront of emergency medical response. You will work closely with a supportive team of healthcare professionals in a fast-paced environment. We offer competitive pay, ensuring that your hard work and dedication are recognized. No experience? No problem! We welcome new EMTs and provide comprehensive training to help you succeed in your role. You can enjoy great benefits such as Medical, Competitive Salary, and Paid Time Off. If you are passionate about serving others, ready to make a difference, and eager to join a reputable organization, apply now and start your rewarding career with Richmond County Ambulance Service! Day to day as an EMT- Emergency Medical Technician As a new EMT- Emergency Medical Technician at Richmond County Ambulance Service, you can expect an exciting and challenging day-to-day experience. You will be responsible for responding to emergency calls, providing immediate medical care to patients, and safely transporting them to medical facilities. Your schedule as an EMT may include nights and weekends, as we provide round-the-clock emergency medical services. You will work closely with a team of dedicated healthcare professionals to provide efficient and effective care to those in need. On a typical day, you can expect to assess patients' conditions, administer necessary medical treatments, and communicate with hospital staff to ensure a smooth handoff of care. You will operate and maintain medical equipment, document patient information accurately, and adhere to all safety protocols. As a new EMT, you will receive comprehensive training and ongoing support to help you excel in your role. Your dedication and commitment to providing excellent patient care will be highly valued at Richmond County Ambulance Service. What you need to be successful To be successful as an EMT- Emergency Medical Technician at Richmond County Ambulance Service, there are certain skills and qualifications you should possess. First and foremost, you must have a valid EMT certification. Strong communication skills are essential as you will be interacting with patients, their families, and other healthcare professionals. You should have the ability to remain calm under pressure and make quick decisions in emergency situations. Familiarity with medical equipment and knowledge of basic medical procedures is crucial. Being physically fit and able to lift heavy objects or patients is also important. In terms of software and tools, proficiency in electronic medical record systems is valuable for accurate documentation. Additionally, you may need to use communication devices such as radios or cell phones to coordinate with your team and medical facilities. Having a valid driver's license and a clean driving record is necessary, as you will be operating an ambulance to transport patients. Finally, a commitment to ongoing learning and staying updated on the latest medical treatment protocols is highly valued at Richmond County Ambulance Service. Make your move If you believe that this position matches your requirements, applying for it is a breeze. Best of luck!