Software jobs in Fargo, North DakotaCrear alertas

Job Description Job Summary This posting may be used to fill multiple vacancies. This position exists to enforce State and Federal laws, rules and regulations governing the operation of motor carriers, commercial vehicle operations and school bus operations in the State of Minnesota; to audit carrier and shipper records, investigate complaints of alleged violations and educate, train, and advise carriers, shippers, other law enforcement agencies and the general public regarding motor carrier regulations. This position also exists to protect the general public from illegal motor carrier practices and from dangers of life and property resulting from failure to comply with motor carrier laws, rule and regulations under the authority of Minnesota Statue 299D.06. The mission of the State Patrol Law Compliance Representative II is to provide for the safe and efficient movement of commercial motor vehicles on Minnesota's roadways through education, assistance, and enforcement. The Department of Public Safety is unable to provide sponsorship for work visas. Applicants must be eligible to work in the United States at the start of employment. DPS does not participate in E-Verify. Qualifications Minimum Qualifications • Requires basic computer/data entry skills using word processing and spreadsheet software to generate documents and records and transmit the information electronically to other locations and personnel., • Requires excellent interpersonal skills with co-workers and the public, including the ability to conduct interviews with commercial vehicle drivers to determine compliance with regulations., • Must possess and maintain a valid driver's license with the ability to travel, with overnight stays, as required, throughout the state of MN., • Successful applicant must have ability to pass and maintain technical certification, with appropriate training, in areas related to commercial vehicle safety regulations (US Department of Transportation - North American Standards certification)., • Analytical skills and ability to interpret and apply laws, rules, and regulations that will allow the successful applicant to work independently without direct supervision., • Technical knowledge relating to the operation and mechanical maintenance of commercial motor vehicles., • Previous knowledge and experience in the areas of regulatory compliance and commercial vehicle safety., • Ability to work cooperatively with individuals from diverse backgrounds and underserved communities. Requires occasionally moving and transporting 50-pound items and frequently moving and transporting objects such as heavy tools and heavy file boxes. This job may require positioning self to move to a significant degree across rough terrain or may involve maintaining a stationary position for an extended period. Additional Requirements This position requires successful completion of the following: It is the policy of the Department of Public Safety that all employees submit to a background investigation prior to employment, which includes the following components: • Criminal History Check, • Reference Check, • Fingerprint Check (MNJIS), • Driver's License Check, • Drug Screen, • Psychological Evaluation, • Pre-Employment Physical Application Details How to Apply Select “Apply for Job” at the top of this page. If you have questions about applying for jobs, contact the Careers Help Desk at 651-259-3637 or email . For additional information about the application process, go to . Contact If you have questions about this position, contact Megan Lund at . To receive consideration as a Connect 700 Program applicant, apply online, email the Job ID#, the Working Title and your valid Proof of Eligibility Certificate by the closing date to Megan Lund at . About Public Safety Dept The Minnesota Department of Public Safety (DPS) is a diverse, complex agency dedicated to serving communities across the state. DPS has 10 public facing and four support divisions with about 2,400 dedicated employees operating programs statewide that all have one goal: Building a safer Minnesota. Working together to improve the state we love. What do Minnesota's State employees have in common? • A sense of purpose in their work, • Connection with their coworkers and communities As an employee, you'll have access to one of the most affordable health insurance plans in Minnesota, along with other benefits to help you and your family be well. Your benefits may include: • Paid vacation and sick leave, • 12 paid holidays each year, • Low-cost medical, dental, vision, and prescription drug plans, • Fertility care, including IVF, • Diabetes care, • Dental and orthodontic care for adults and children, • 6 weeks paid leave for parents of newborn or newly adopted children, • Pension plan that provides income when you retire (after working at least three years), • Employer paid life insurance to provide support for your family in the event of death, • Short-term and long-term disability insurance that can provide income if you are unable to work due to illness or injury, • Tax-free expense accounts for health, dental, and dependent care, • Training, classes, and professional development, • A voluntary confidential program that helps employees and their families with life challenges that may impact overall health, personal well-being, or job performance, • Common sources of stress can be addressed through the EAP: mental health, relationship challenges (personal and work), grief and loss, finances, and legal issues, • Daily Living/Convenience Services: Chore services, home repair, trip planning, child/elder care Programs, resources and benefits eligibility varies based on type of employment, agency, funding availability, union/collective bargaining agreement, location, and length of service with the State of Minnesota. Company DescriptionWhen you bring your career to the State of Minnesota, the work you do affects the quality of life of millions of Minnesotans. From those who shape policy, to those who keep us safe, preserve our environment, or take care of our most vulnerable populations, we take our responsibilities to the public seriously. We need diverse and talented individuals – like you – to serve our great state and build a better Minnesota.When you bring your career to the State of Minnesota, the work you do affects the quality of life of millions of Minnesotans. From those who shape policy, to those who keep us safe, preserve our environment, or take care of our most vulnerable populations, we take our responsibilities to the public seriously. We need diverse and talented individuals – like you – to serve our great state and build a better Minnesota.

Job Description Controls Technician Job Type: Full Time, Hourly Location: Based out of 1434 5th Avenue N, Fargo, ND 58102 Frequent travel required for the role; most often day travel. Expected Hours of Work: Our hours of operation are Monday through Friday from 7:30AM to 5PM. Reports to: Vice President of Automation and Controls About the Company Electric Pump, LLC and its family of companies have been in operation for the last 46 years providing fluid handling equipment to our customers in the industrial, municipal, and environmental markets. In addition, we are the largest pump service organization in the upper Midwest. Electric Pump is comprised of eight locations in seven states with approximately 135 employees. Our offices have a friendly, laid-back environment. Website: Job Summary Controls Technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain customer’s equipment. Work will include, but not limited to installation, maintenance, troubleshooting, and servicing a wide variety of water & wastewater controls, such as: VFDs, PLCs, SCADA telemetry, & station control panels. Essential Functions • Perform highly diversified duties to install, repair, and troubleshoot controls of fluid handling products., • Understanding of basic PLC knowledge (Allen Bradley), • Provide on call assistance for emergency/unscheduled repairs of Control equipment as needed., • Perform simple machinist duties and responsibilities., • Perform mechanical skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic., • Read and interpret pump manuals and work orders to perform required maintenance and service., • Able to understand and follow ladder diagrams and wiring schematics, • Diagnose problems, replace or repair parts, test and make adjustments., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Comply with safety regulations and maintain clean and orderly work areas. Competencies • Knowledge of PLC’s, VFD, motor controls, process instrumentation, and Windows based control software desired., • Knowledge of Allen Bradley software, • Technical Capacity., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative. Work Environment While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Education and Experience High school diploma/GED and previous mechanical experience required. Post-secondary or trade school education, as well a pump repair experience is preferred not required. Benefits: · Health insurance · 401(k) with company matching · Dental insurance · Life insurance · Paid time off · Vision insurance We are an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. #ElectricPump #LI-Onsite Company DescriptionElectric Pump, LLC and its family of companies have been in operation for the last 46 years providing fluid handling equipment to our customers in the industrial, municipal, and environmental markets. In addition, we are the largest pump service organization in the upper Midwest. Electric Pump is comprised of eight locations in seven states with approximately 135 employees. Our offices have a friendly, laid-back environment.Electric Pump, LLC and its family of companies have been in operation for the last 46 years providing fluid handling equipment to our customers in the industrial, municipal, and environmental markets. In addition, we are the largest pump service organization in the upper Midwest. Electric Pump is comprised of eight locations in seven states with approximately 135 employees. Our offices have a friendly, laid-back environment.

Job Description Position Summary We are seeking a talented and detail-oriented Interior Designer to join our residential home building team. This role is responsible for designing functional, cohesive, and market-appropriate interiors for new construction homes, from concept through completion. The Interior Designer works closely with clients, project managers, and vendors to ensure each home reflects the client’s vision while aligning with budget, schedule, and company standards. Key Responsibilities • Collaborate with homeowners to understand design preferences, lifestyle needs, and budget parameters, • Guide clients through selection appointments including (but not limited to): flooring, cabinetry, countertops, tile, plumbing fixtures, lighting, paint colors, hardware, and finishes, • Prepare and maintain detailed specification sheets, selection schedules, and documentation for construction teams, • Ensure selections comply with lead times and budget allowances, • Coordinate with vendors, showrooms, and suppliers to source materials and obtain pricing, • Communicate selections clearly to project managers and trade partners, • Attend project meetings, walkthroughs, and site visits as needed to confirm design intent is executed correctly, • Manage revisions and change orders related to interior selections, • Stay current on design trends, materials, and residential building practices, • Proficiently use tools and software for graphic design and visualization purposes. Qualifications • Bachelor’s degree in Interior Design or related field preferred, • 2+ years of experience in residential design, preferably with a home builder or construction firm, • Strong understanding of residential construction processes and materials, • Proficiency in design software (e.g., AutoCAD, SketchUp, Revit, or similar), • Excellent organizational and time-management skills, • Strong communication and client-facing skills, • Ability to manage multiple projects simultaneously while meeting deadlines, • Detail-oriented with a strong sense of style and space planning, • Experience with new construction and builder-grade selections, • Familiarity with budgets, allowances, and cost tracking Compensation & Benefits • Competitive salary based on experience, • Benefits package to include health insurance, dental insurance, vision insurance, paid time off, and holidays Schedule: Monday - Friday (8:00am - 5:00pm) Job Type: Full-time Benefits: • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Work Location: In person

Job Description Business Development Manager Culinex, LLC. Summary of Position: The ideal candidate will have a strong understanding of the foodservice industry and a passion for providing high-quality equipment solutions to restaurants, hotels, institutions, and other foodservice establishments. As a key member of the sales team, you will be responsible for developing new businesses, maintaining client relationships, and achieving sales targets for commercial kitchen and foodservice equipment. Roles and Responsibilities: • Sales Development: Prospect, identify, and pursue new business opportunities within the foodservice industry, including but not limited to, owner representatives, hotel owners and developers, and restaurant concept owners., • Sales Development: Prospect, identify, and pursue new business opportunities within the foodservice operator industry, including restaurants, hotels, schools, hospitals, and catering companies., • Product Expertise: Develop a deep understanding of the company’s product offerings, including commercial kitchen equipment, refrigeration units, cooking appliances, and other related foodservice products. Understand the steps and needs of new construction and renovation, be proficient in construction sites and terminology., • Consultative Selling: Work closely with clients to assess their needs, provide tailored solutions, and recommend the most suitable equipment based on their operational requirements., • Client Relationship Management: Build and maintain strong relationships with existing clients, ensuring repeat business and ongoing customer satisfaction. Maintain a full pipeline of prospects to ensure a constant stream of new clients., • Sales Presentations: Deliver product presentations, demonstrations, and quotes to prospective customers, clearly explaining product features, benefits, and pricing., • Order Management: Coordinate with internal teams to process orders, track shipments, and ensure on-time delivery of equipment., • Market Research: Stay up to date on industry trends, competitor products, and customer preferences to better position the company’s offerings in the market., • Sales Reporting: Maintain accurate records of sales activities, customer interactions, and pipeline status. Provide regular updates and reports to the Sales Manager through Salesforce., • Trade Shows and Networking: Represent the company at industry trade shows, conferences, and other events to network and promote products., • Negotiation & Closing: Negotiate pricing and contract terms with customers to close deals while maintaining profitability. Qualifications: • Education: Bachelor’s degree in business, Marketing, Hospitality, or related field preferred; or equivalent industry experience., • Experience: Minimum of 3-5 years in sales, preferably in the foodservice equipment or commercial kitchen industry., • Industry Knowledge: Understanding foodservice operations, equipment, construction and design knowledge is a significant plus, • Skills:, • Strong communication and interpersonal skills., • Excellent negotiation and presentation abilities., • Ability to understand and meet customer needs in a consultative manner., • Detail-oriented with strong organizational skills., • Self-motivated, with a proven ability to work independently and as part of a team., • Proficient in Microsoft Office Suite, Bluebeam, Auto Quotes and CRM software (Salesforce, NetSuite.)., • Ability to occasionally lift up to 50 lbs. (e.g., product samples, marketing materials)., • Frequent travel to customer locations, trade shows, and industry events. Additional Information: Kamran and Company, LLC. is an equal opportunity employer that recruits, hires, trains, and promotes the most qualified individuals without regard to gender, race, color, national origin, religion, age, sexual orientation, disability, veteran/military status, marital status or any other status protected by federal or state law, with regard to any term or condition of employment. At Kamran and Company, we believe in providing competitive compensation packages that align with an individual's qualifications, experience, and the specific requirements of the role. We invite you to request specific pay range information from your designated point of contact in the recruitment process.

Job Description POSITION SPECIFICATION Position: Structural Engineer III Department: Industrial, Process and Agribusiness (IPA) Reporting Relationship: Manager, Structural Engineering COMPANY BACKGROUND KFI Engineers is a recognized industry leader in facility infrastructure design and performance. Since 1996, our culture of collaboration and unique capabilities have allowed us to make a difference in the way infrastructure and processing projects are delivered. Headquartered in St. Paul, MN, with numerous regional offices throughout the United States, and a team of hundreds of professionals, we offer opportunities to continue your career with mentorship programs, career growth support, and continued education. With KFI, we find a way to provide creative solutions to unique projects while providing the same care we would expect if we were the client. For more information about KFI Engineers and our culture, please visit . POSITION OVERVIEW & RESPONSIBILITIES The Structural Engineer III plays a key role in the successful execution of projects. This individual will provide technical and engineering excellence, as well as successful delivery of work to our customers. The Structural Engineer III is responsible for a high level of customer satisfaction by ensuring expectations are clearly communicated and managed – both externally and internally. The successful candidate will also contribute to a dynamic team environment by being proactive, communicating clearly to all stakeholders, and modeling a highly collaborative working environment. This person will also help support the business development process, through the writing of proposals and meeting with prospective and current customers. Specific responsibilities will include, but not be limited to, the following: • Serve as structural discipline lead for complete projects from start to finish., • Participate in business development – proposals, meetings with clients, interviews., • Effectively execute projects. Help develop estimates for assigned scope of work, and ensure we stay within scope and adhere to the overall project budget (KFI labor, expenses, and subs)., • Coordinate work with both internal and external stakeholders, providing technical support and work direction as needed., • Oversee the production of construction documents including drawings and specifications, ensuring the application of sound structural engineering principles., • Provide work direction to other team members (including subcontractors), and technical and engineering support to other departments/disciplines., • Other duties as assigned QUALIFICATIONS Required • Bachelor’s degree in Civil Engineering with an emphasis in Structural Design strongly preferred., • 10+ years of experience., • Must be legally authorized to work in the US on a permanent basis without the need for work sponsorship now or in the future., • Possess an understanding of Electrical, Mechanical, and Civil Engineering construction practices., • Strong structural design experience across a variety of industries (agribusiness and/or central utility) and materials (concrete and steel, masonry helpful)., • Experience using structural analysis software (RISA or similar)., • Demonstrated consistency in successful combination of design and/or project management., • Knowledge of computer technology and specific areas of application, including MS Office., • Excellent verbal and written communication, and meeting management skills., • Strong interpersonal skills and ability to collaborate with others., • Master’s degree in Structural Engineering., • Professional Engineer (P.E.) certification. Registration in multiple states, or ability to become registered in multiple states, is desirable., • Some work locations will feature the tough terrain typical of construction sites., • Travel: May include some domestic travel 1 to 2 days in duration – typically not exceeding 10% to 15% throughout the year. CORE BEHAVIORS Accountable • Demonstrates persistence in the achievement of goals., • Acts with a sense of urgency., • Demonstrates agility, adapts well to changes., • Works well under pressure., • Plans projects well, managing last-minute rushes and disruptions., • Balances Speed and Quality., • Looks for improvement in our delivery, tools and processes., • Keeps others adequately informed., • Exhibits objectivity and openness to others' views., • Balances team and individual responsibilities., • Shares expertise with others., • Inspires respect and trust. Benefits: At KFI, our comprehensive benefit program provides our employees with the resources to support their health, wellness and financial well-being. Full-Time employees have access to: • Health, dental and vision insurance coverage, • Virtual health services, • Health Savings Account (HSA) & Health Reimbursement Account (HRA) for HDHP enrollees with KFI contributions, • Flexible Spending Account, • 401(k) plan, • Short-term and long-term disability insurance, life and AD&D insurance, • Employee Assistance Program, • Paid Time Off to include Earned Sick and Safe Time in accordance with state laws, • Company Paid Holidays, • Tuition Reimbursement, • Bereavement Leave Please note this job description is not designed to cover a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position is not eligible for Visa sponsorship. Equal Opportunity Employer – Veterans and Disabilities

Job Description Business Development Manager Berlin's Restaurant Supply Summary of Position: The ideal candidate will have a strong understanding of the foodservice industry and a passion for providing high-quality equipment solutions to restaurants, hotels, institutions, and other foodservice establishments. As a key member of the sales team, you will be responsible for developing new businesses, maintaining client relationships, and achieving sales targets for commercial kitchen and foodservice equipment. Roles and Responsibilities: • Sales Development: Prospect, identify, and pursue new business opportunities within the foodservice industry, including but not limited to, owner representatives, hotel owners and developers, and restaurant concept owners., • Sales Development: Prospect, identify, and pursue new business opportunities within the foodservice operator industry, including restaurants, hotels, schools, hospitals, and catering companies., • Product Expertise: Develop a deep understanding of the company’s product offerings, including commercial kitchen equipment, refrigeration units, cooking appliances, and other related foodservice products. Understand the steps and needs of new construction and renovation, be proficient in construction sites and terminology., • Consultative Selling: Work closely with clients to assess their needs, provide tailored solutions, and recommend the most suitable equipment based on their operational requirements., • Client Relationship Management: Build and maintain strong relationships with existing clients, ensuring repeat business and ongoing customer satisfaction. Maintain a full pipeline of prospects to ensure a constant stream of new clients., • Sales Presentations: Deliver product presentations, demonstrations, and quotes to prospective customers, clearly explaining product features, benefits, and pricing., • Order Management: Coordinate with internal teams to process orders, track shipments, and ensure on-time delivery of equipment., • Market Research: Stay up to date on industry trends, competitor products, and customer preferences to better position the company’s offerings in the market., • Sales Reporting: Maintain accurate records of sales activities, customer interactions, and pipeline status. Provide regular updates and reports to the Sales Manager through Salesforce., • Trade Shows and Networking: Represent the company at industry trade shows, conferences, and other events to network and promote products., • Negotiation & Closing: Negotiate pricing and contract terms with customers to close deals while maintaining profitability. Qualifications: • Education: Bachelor’s degree in business, Marketing, Hospitality, or related field preferred; or equivalent industry experience., • Experience: Minimum of 3-5 years in sales, preferably in the foodservice equipment or commercial kitchen industry., • Industry Knowledge: Understanding foodservice operations, equipment, construction and design knowledge is a significant plus, • Skills:, • Strong communication and interpersonal skills., • Excellent negotiation and presentation abilities., • Ability to understand and meet customer needs in a consultative manner., • Detail-oriented with strong organizational skills., • Self-motivated, with a proven ability to work independently and as part of a team., • Proficient in Microsoft Office Suite, Bluebeam, Auto Quotes and CRM software (Salesforce, NetSuite.)., • Ability to occasionally lift up to 50 lbs. (e.g., product samples, marketing materials)., • Frequent travel to customer locations, trade shows, and industry events. Additional Information: Kamran and Company, LLC. is an equal opportunity employer that recruits, hires, trains, and promotes the most qualified individuals without regard to gender, race, color, national origin, religion, age, sexual orientation, disability, veteran/military status, marital status or any other status protected by federal or state law, with regard to any term or condition of employment. At Kamran and Company, we believe in providing competitive compensation packages that align with an individual's qualifications, experience, and the specific requirements of the role. We invite you to request specific pay range information from your designated point of contact in the recruitment process.

Job Description Business Development Manager Atlas Restaurant Supply Summary of Position: The ideal candidate will have a strong understanding of the foodservice industry and a passion for providing high-quality equipment solutions to restaurants, hotels, institutions, and other foodservice establishments. As a key member of the sales team, you will be responsible for developing new businesses, maintaining client relationships, and achieving sales targets for commercial kitchen and foodservice equipment. Roles and Responsibilities: • Sales Development: Prospect, identify, and pursue new business opportunities within the foodservice industry, including but not limited to, owner representatives, hotel owners and developers, and restaurant concept owners., • Sales Development: Prospect, identify, and pursue new business opportunities within the foodservice operator industry, including restaurants, hotels, schools, hospitals, and catering companies., • Product Expertise: Develop a deep understanding of the company’s product offerings, including commercial kitchen equipment, refrigeration units, cooking appliances, and other related foodservice products. Understand the steps and needs of new construction and renovation, be proficient in construction sites and terminology., • Consultative Selling: Work closely with clients to assess their needs, provide tailored solutions, and recommend the most suitable equipment based on their operational requirements., • Client Relationship Management: Build and maintain strong relationships with existing clients, ensuring repeat business and ongoing customer satisfaction. Maintain a full pipeline of prospects to ensure a constant stream of new clients., • Sales Presentations: Deliver product presentations, demonstrations, and quotes to prospective customers, clearly explaining product features, benefits, and pricing., • Order Management: Coordinate with internal teams to process orders, track shipments, and ensure on-time delivery of equipment., • Market Research: Stay up to date on industry trends, competitor products, and customer preferences to better position the company’s offerings in the market., • Sales Reporting: Maintain accurate records of sales activities, customer interactions, and pipeline status. Provide regular updates and reports to the Sales Manager through Salesforce., • Trade Shows and Networking: Represent the company at industry trade shows, conferences, and other events to network and promote products., • Negotiation & Closing: Negotiate pricing and contract terms with customers to close deals while maintaining profitability. Qualifications: • Education: Bachelor’s degree in business, Marketing, Hospitality, or related field preferred; or equivalent industry experience., • Experience: Minimum of 3-5 years in sales, preferably in the foodservice equipment or commercial kitchen industry., • Industry Knowledge: Understanding foodservice operations, equipment, construction and design knowledge is a significant plus, • Skills:, • Strong communication and interpersonal skills., • Excellent negotiation and presentation abilities., • Ability to understand and meet customer needs in a consultative manner., • Detail-oriented with strong organizational skills., • Self-motivated, with a proven ability to work independently and as part of a team., • Proficient in Microsoft Office Suite, Bluebeam, Auto Quotes and CRM software (Salesforce, NetSuite.)., • Ability to occasionally lift up to 50 lbs. (e.g., product samples, marketing materials)., • Frequent travel to customer locations, trade shows, and industry events. Additional Information: Kamran and Company, LLC. is an equal opportunity employer that recruits, hires, trains, and promotes the most qualified individuals without regard to gender, race, color, national origin, religion, age, sexual orientation, disability, veteran/military status, marital status or any other status protected by federal or state law, with regard to any term or condition of employment. At Kamran and Company, we believe in providing competitive compensation packages that align with an individual's qualifications, experience, and the specific requirements of the role. We invite you to request specific pay range information from your designated point of contact in the recruitment process.

Job Description Kraus-Anderson offers an opportunity to make an immediate impact with an industry leader! Core Purpose: Building enduring relationships and strong communities Core Values: • Integrity – Do the right thing…always be respectful, honest and fair, • Commitment – Take ownership, work hard, and keep promises, • Teamwork – Collaborate to foster trust and success for all For more than a century, Kraus-Anderson has been transforming the American landscape. Founded in 1897 and privately owned and managed by the Engelsma family for more than 70 years, KA is consistently ranked by Engineering News Record among the top 50 general contractors in the United States. Our base of operations in Minnesota is supplemented with regional offices, extending our capabilities coast to coast. We take a highly collaborative approach to our work. We work closely with owners, architects and the entire planning team well before ground is broken; providing cost analyses, scheduling information, and value engineering services to ensure that our client can make informed decisions leading to a timely finish of the highest quality and the best value. Summary This position will be responsible for planning, directing and coordinating activities of designated projects to ensure that goals or objectives of the projects are accomplished within the prescribed time frame and funding parameters by performing the following duties personally or through Superintendents and Project Coordinators. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Reviews project proposal, plans and specifications to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements and allotment of available resources to various phases of project., • Establishes work plan, scheduling and staffing for each phase of project and arrangement for recruitment or assignment of project personnel as needed., • Reads and understands drawings and specifications., • Establishes a growing network of business associates, subcontractors and related vendors., • Confers with team leader or project staff to outline work plans, assign duties, responsibilities and scope of authority., • Coordinates activities with project staff to ensure project progress within prescribed budget and provides technical advice to resolve problems., • Negotiates with the Owner and subcontractors on projects in order to maintain an efficient and well-run project., • Works with actual billings on projects and works with Finance to ensure a smooth process on all projects., • Prepares project reports for management, clients and others and reviews status reports prepared by project personnel and modifies schedules or plans as required., • Coordinates project activities with activities of governmental regulatory or other governmental agencies., • Works with Project Superintendents, Project Assistants, clients and subcontractors., • Supervises Project Assistant assigned to projects including planning, assigning work, providing feedback and appraising performance., • Assists in proposal writing, reviews project proposal, drawings and plans to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements and allotment of available resources to various phases of project., • Assist in the mentoring and development of internal talent, • Establishes and maintains relationships with Owners and other project partners, • Assists in directing strategic planning and provides leadership role in business development and client relations., • Assist the Safety Department in an effort to enforce the corporate safety and health policies and procedures, • Performs other duties as assigned. Required Knowledge, Skills and Abilities: • Bachelor’s degree from four year college/university or equivalent., • Minimum of 5 years related work experience., • Demonstrated computer proficiency (MS Office – Word, Excel and Outlook) and knowledge of project management software, • Excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers, • Ability to work under pressure and meet deadlines, while maintaining a positive attitude and providing exemplary customer service, • Ability to use time productively, maximize efficiency and meet challenging work goals, • Ability to maintain compliance with all company policies and procedures, • Ability to possess and maintain exceptional work ethic as well as uphold company values and demand the highest standard of conduct from self and others, • Exhibits confidence in self and others, • Accepts feedback from others as well as provides feedback, • Inspires and motivates self and team to perform well, • Contributes to building a positive team experience, • Valid Driver's License, ability to maintain a satisfactory Motor Vehicle Record, and ability to adhere to the KA Motor Vehicle Policy. The physical demands described are representative of those that must be met by any employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential functions include items such as ability to: • Clearly communicate information (both written and verbal) to colleagues and key stakeholders, • Stand and/or sit in a stationary position for extended periods of time; 50%+, • Use a computer/laptop/iPad in open office environment with natural and/or florescent lighting, • Navigate between office building floors, and on occasion, attend off-site meetings Pay is based on many factors including but not limited to education, skill, experience, training, certifications, and other business needs. Why KA? We offer a challenging, rewarding, and supportive environment where employees are positioned to make a positive impact on our business, our communities, and their own future. We believe in building leaders. KA offers a wide range of enrichment and professional growth opportunities through KA University and community service opportunities through our KA Has Heart Volunteer Program. KA offers full time employees (30+ hours) a significant Total Rewards package including: • Medical insurance Plan Options, • Health Savings Accounts (HSA), • Flex Spending Accounts (FSA), • Wellness Program, • Fitness Center (Minneapolis), • KA University Training and Development, • Fitness Center, KA corporate headquarters, Minneapolis, • 401(k) Plan, • Company sponsored Short Term and Long Term Disability, • Company sponsored Life/Accidental Death and Dismemberment Insurance, • Time Off including vacation, sick and holiday pay, • Workplace Flexibility, • Paid Parental Leave, • Paid Military Leave for Active Reserve Duty, • Part time/Transition Options Make A Positive Impact Kraus-Anderson is an AA EOE including disability and vet employer

Job DescriptionAdministrative Assistant / Service Dispatcher Overview Join a collaborative and supportive office team as an Administrative Assistant focused on coordinating service requests, supporting field technicians, and ensuring smooth day‑to‑day operations. This role is ideal for someone who enjoys structured administrative work, multitasking, and being the central communication point between customers and service teams. Key Responsibilities • Coordinate incoming service requests by answering and documenting customer inquiries in a professional, calm manner., • Schedule and dispatch service technicians based on location, availability, and job requirements., • Maintain accurate client records, entering service details and updating job statuses in internal systems., • Support daily office operations, including data entry, documentation, and communication with internal teams., • Monitor workflow and technician progress to ensure timely completion of service calls., • Provide administrative support to the customer service and operations departments as needed.Required Skills & Experience, • Proficiency in Microsoft Office and general computer literacy., • Experience in administrative support, dispatching, or customer coordination., • Strong communication skills, both written and verbal., • Ability to multitask in a fast‑paced office environment., • Minimum 2 years of customer service or administrative experience., • Accurate data entry skills and attention to detail.Preferred Qualifications, • Bachelor’s degree or equivalent experience is a plus., • Familiarity with dispatching or scheduling software is helpful but not required.Work Environment & Schedule, • Office-based role within a small, close‑knit customer service and operations team., • Standard hours: 7:30 AM – 4:30 PM, Monday through Friday., • Rotating weekend schedule: one weekend every six weeks, with 4‑hour shifts on Saturday and Sunday., • Flexible scheduling options when working weekends (overtime or a weekday off). This is a Contract to Hire position based out of Fargo, ND. Pay and Benefits The pay range for this position is $18.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Fargo,ND. Application Deadline This position is anticipated to close on Jan 19, 2026. About Aston Carter: Aston Carter provides world-class corporate talent solutions to thousands of clients across the globe. Specialized in accounting, finance, human resources, talent acquisition, procurement, supply chain and select administrative professions, we extend the capabilities of industry-leading companies. We draw on our deep recruiting expertise and expansive network to meet the evolving needs of our clients and talent community with agility and excellence. With offices across the U.S., Canada, Asia Pacific and Europe, Aston Carter serves many of the Fortune 500. We are proud to be a ClearlyRated Best of Staffing® double diamond winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email for other accommodation options.

Genie Healthcare is seeking a travel nurse RN Med Surg / Telemetry for a travel nursing job in Fargo, North Dakota. Job Description & Requirements • Specialty: Med Surg / Telemetry, • Discipline: RN, • Start Date: 01/30/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, rotating

Genie Healthcare is seeking a travel nurse RN Float Med Surg for a travel nursing job in Fargo, North Dakota. Job Description & Requirements • Specialty: Med Surg, • Discipline: RN, • Start Date: 02/09/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel Genie Healthcare is looking for a RN to work in MedSurg for a 13 weeks travel assignment located in Fargo, ND for the Shift (3x12 nights, 19:00:00-07:00:00, 12.00-3). Pay and benefits packages are estimated based on client bill rate at time the job was posted. These rates are subject to change. Exact pay and benefits vary based on several things, including, but not limited to, guaranteed hours, client changes in bill rate, experience, etc. Benefits: Medical Insurance, Dental Insurance, Vision Insurance, 401(k) with company matching (50% up to 6% of what you contribute) Genie Healthcare Job ID #17666066. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN:MedSurg,19:00:00-07:00:00 About Genie Healthcare Genie Healthcare is one of the fastest growing Nurse Travel Agencies in the USA. Genie serves hundreds of facilities and has over 4000 current travel RN contracts open at any given time. \n\n Genie provides travel RN’s flexibility, support, top pay scale, housing and the #1 rated, multi-state health insurance coverage. \n\n Genie Healthcare carries with it a commitment to providing a comprehensive level of service and quality care. Growing from a small team of eager recruiters to a company with satisfied clients in nearly every corner of the nation, delivering excellence in patient and customer care is the key to Genie’s success. \n\n The management team has 20 years of experience in workforce solutions and staffing in medical and non-medical fields, roles ranging from Clerical job to Cardiologist to software developer to CEO.

Genie Healthcare is seeking a travel nurse RN Med Surg for a travel nursing job in Fargo, North Dakota. Job Description & Requirements • Specialty: Med Surg, • Discipline: RN, • Start Date: 02/02/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, rotating

Genie Healthcare is seeking a travel Cath Lab Technologist for a travel job in Fargo, North Dakota. Job Description & Requirements • Specialty: Cath Lab Technologist, • Discipline: Allied Health Professional, • Start Date: 02/23/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days, • Employment Type: Travel Genie Healthcare is looking for a Cardiology to work in Cath Lab Tech for a 13 weeks travel assignment located in Fargo, ND for the Shift (4x10 Days-Please verify shift details with recruiter, 07:00:00-17:00:00, 10.00-4). Pay and benefits packages are estimated based on client bill rate at time the job was posted. These rates are subject to change. Exact pay and benefits vary based on several things, including, but not limited to, guaranteed hours, client changes in bill rate, experience, etc. Benefits: Medical Insurance, Dental Insurance, Vision Insurance, 401(k) with company matching (50% up to 6% of what you contribute) Genie Healthcare Job ID #17648368. Pay package is based on 10 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cardiology:Cath Lab Tech,07:00:00-17:00:00 About Genie Healthcare Genie Healthcare is one of the fastest growing Nurse Travel Agencies in the USA. Genie serves hundreds of facilities and has over 4000 current travel RN contracts open at any given time. \n\n Genie provides travel RN’s flexibility, support, top pay scale, housing and the #1 rated, multi-state health insurance coverage. \n\n Genie Healthcare carries with it a commitment to providing a comprehensive level of service and quality care. Growing from a small team of eager recruiters to a company with satisfied clients in nearly every corner of the nation, delivering excellence in patient and customer care is the key to Genie’s success. \n\n The management team has 20 years of experience in workforce solutions and staffing in medical and non-medical fields, roles ranging from Clerical job to Cardiologist to software developer to CEO.

Genie Healthcare is seeking a travel nurse RN Med Surg for a travel nursing job in Fargo, North Dakota. Job Description & Requirements • Specialty: Med Surg, • Discipline: RN, • Start Date: 02/02/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, rotating, • Employment Type: Travel Genie Healthcare is looking for a RN to work in MedSurg for a 13 weeks travel assignment located in Fargo, ND for the Shift (Rotating-Please verify shift details with recruiter, 19:00:00-07:00:00, 12.00-3). Pay and benefits packages are estimated based on client bill rate at time the job was posted. These rates are subject to change. Exact pay and benefits vary based on several things, including, but not limited to, guaranteed hours, client changes in bill rate, experience, etc. Benefits: Medical Insurance, Dental Insurance, Vision Insurance, 401(k) with company matching (50% up to 6% of what you contribute) Genie Healthcare Job ID #17629662. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN:MedSurg,19:00:00-07:00:00 About Genie Healthcare Genie Healthcare is one of the fastest growing Nurse Travel Agencies in the USA. Genie serves hundreds of facilities and has over 4000 current travel RN contracts open at any given time. \n\n Genie provides travel RN’s flexibility, support, top pay scale, housing and the #1 rated, multi-state health insurance coverage. \n\n Genie Healthcare carries with it a commitment to providing a comprehensive level of service and quality care. Growing from a small team of eager recruiters to a company with satisfied clients in nearly every corner of the nation, delivering excellence in patient and customer care is the key to Genie’s success. \n\n The management team has 20 years of experience in workforce solutions and staffing in medical and non-medical fields, roles ranging from Clerical job to Cardiologist to software developer to CEO.

Vibra Travels is seeking a travel nurse RN Med Surg / Telemetry for a travel nursing job in Fargo, North Dakota. Job Description & Requirements • Specialty: Med Surg / Telemetry, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days Benefits/Perks of working with VIBRA TRAVELS: • Work with 1 recruiter from start to finish and assignment to assignment, • Local and Non-local positions available, • Competitive hourly rate in addition to tax-free stipend (if applicable), • No pay cuts mid-contract, • Referral bonus (up to $1000 per referral!), • License reimbursement if traveling to new state where new license is required, • Your pick of assignments at facilities we own and operate nationwide (70+) or partner facilities Qualifications/Skills: • Current BLS certification from a Vibra-approved vendor required., • Additional certifications may be required by Vibra Travels (ex ACLS, PALS, NRP) Additional Qualifications/Skills: • Previous acute care experience is strongly preferred., • Ability to project a professional image., • Knowledge of regulatory standards and compliance requirements., • Strong organizational, prioritizing and analytical skills., • Ability to make independent decisions when circumstances warrant., • Working knowledge of computer and software applications used in job functions., • Freedom from illegal use of and effects of use of drugs and alcohol in the workplace As an employee of Vibra Travels, you will be eligible to enroll in Medical and Prescription benefits once you meet the eligibility requirements outlined by the Affordable Care Act (ACA) Vibra Travels Job ID #20251028-54. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Vibra Travels Regardless of the placement you’re seeking, you’ll experience the same great benefits when choosing Vibra Travels for your next contract. White-glove service, every step of the way: At Vibra Travels, we believe in providing top-notch service to our travel nurses. From the moment you first contact us, you’ll experience a level of support and care that sets us apart from the rest. Your recruiter, your partner: Unlike other travel nursing agencies, we believe in building one-on-one relationships with our clinicians. Your dedicated recruiter will be your advocate, guiding you through the entire process and ensuring your needs are met. Clinical support at your fingertips: We understand that being a traveler can sometimes be challenging. That’s why we have a dedicated clinical support team available to answer any questions or concerns you may have during your assignments. Nationwide placements, endless opportunities: With Vibra Travels, you’ll have access to placements across the nation. Whether you’re looking for an acute care, rehabilitation, critical care, or behavioral health hospital, we have opportunities waiting for you in every corner of the country. Join us today and experience traveling done different! Benefits • Holiday Pay, • License and certification reimbursement, • Medical benefits, • Referral bonus

Vibra Travels is seeking a travel nurse RN Long Term Acute Care for a travel nursing job in Fargo, North Dakota. Job Description & Requirements • Specialty: Long Term Acute Care, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days Benefits/Perks of working with VIBRA TRAVELS: • Work with 1 recruiter from start to finish and assignment to assignment, • Local and Non-local positions available, • Competitive hourly rate in addition to tax-free stipend (if applicable), • No pay cuts mid-contract, • Referral bonus (up to $1000 per referral!), • License reimbursement if traveling to new state where new license is required, • Your pick of assignments at facilities we own and operate nationwide (70+) or partner facilities Qualifications/Skills: • Current BLS certification from a Vibra-approved vendor required., • Additional certifications may be required by Vibra Travels (ex ACLS, PALS, NRP) Additional Qualifications/Skills: • Previous acute care experience is strongly preferred., • Ability to project a professional image., • Knowledge of regulatory standards and compliance requirements., • Strong organizational, prioritizing and analytical skills., • Ability to make independent decisions when circumstances warrant., • Working knowledge of computer and software applications used in job functions., • Freedom from illegal use of and effects of use of drugs and alcohol in the workplace As an employee of Vibra Travels, you will be eligible to enroll in Medical and Prescription benefits once you meet the eligibility requirements outlined by the Affordable Care Act (ACA) Vibra Travels Job ID #20251028-55. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Vibra Travels Regardless of the placement you’re seeking, you’ll experience the same great benefits when choosing Vibra Travels for your next contract. White-glove service, every step of the way: At Vibra Travels, we believe in providing top-notch service to our travel nurses. From the moment you first contact us, you’ll experience a level of support and care that sets us apart from the rest. Your recruiter, your partner: Unlike other travel nursing agencies, we believe in building one-on-one relationships with our clinicians. Your dedicated recruiter will be your advocate, guiding you through the entire process and ensuring your needs are met. Clinical support at your fingertips: We understand that being a traveler can sometimes be challenging. That’s why we have a dedicated clinical support team available to answer any questions or concerns you may have during your assignments. Nationwide placements, endless opportunities: With Vibra Travels, you’ll have access to placements across the nation. Whether you’re looking for an acute care, rehabilitation, critical care, or behavioral health hospital, we have opportunities waiting for you in every corner of the country. Join us today and experience traveling done different! Benefits • Holiday Pay, • License and certification reimbursement, • Medical benefits, • Referral bonus

Vibra Travels is seeking a travel nurse RN ICU - Intensive Care Unit for a travel nursing job in Fargo, North Dakota. Job Description & Requirements • Specialty: ICU - Intensive Care Unit, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights Benefits/Perks of working with VIBRA TRAVELS: • Work with 1 recruiter from start to finish and assignment to assignment, • Local and Non-local positions available, • Competitive hourly rate in addition to tax-free stipend (if applicable), • No pay cuts mid-contract, • Referral bonus (up to $1000 per referral!), • License reimbursement if traveling to new state where new license is required, • Your pick of assignments at facilities we own and operate nationwide (70+) or partner facilities Qualifications/Skills: • Current BLS certification from a Vibra-approved vendor required., • Additional certifications may be required by Vibra Travels (ex ACLS, PALS, NRP) Additional Qualifications/Skills: • Previous acute care experience is strongly preferred., • Ability to project a professional image., • Knowledge of regulatory standards and compliance requirements., • Strong organizational, prioritizing and analytical skills., • Ability to make independent decisions when circumstances warrant., • Working knowledge of computer and software applications used in job functions., • Freedom from illegal use of and effects of use of drugs and alcohol in the workplace As an employee of Vibra Travels, you will be eligible to enroll in Medical and Prescription benefits once you meet the eligibility requirements outlined by the Affordable Care Act (ACA) Vibra Travels Job ID #20251028-52. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Vibra Travels Regardless of the placement you’re seeking, you’ll experience the same great benefits when choosing Vibra Travels for your next contract. White-glove service, every step of the way: At Vibra Travels, we believe in providing top-notch service to our travel nurses. From the moment you first contact us, you’ll experience a level of support and care that sets us apart from the rest. Your recruiter, your partner: Unlike other travel nursing agencies, we believe in building one-on-one relationships with our clinicians. Your dedicated recruiter will be your advocate, guiding you through the entire process and ensuring your needs are met. Clinical support at your fingertips: We understand that being a traveler can sometimes be challenging. That’s why we have a dedicated clinical support team available to answer any questions or concerns you may have during your assignments. Nationwide placements, endless opportunities: With Vibra Travels, you’ll have access to placements across the nation. Whether you’re looking for an acute care, rehabilitation, critical care, or behavioral health hospital, we have opportunities waiting for you in every corner of the country. Join us today and experience traveling done different! Benefits • Holiday Pay, • License and certification reimbursement, • Medical benefits, • Referral bonus

Genie Healthcare is seeking a travel Respiratory Therapist for a travel job in Fargo, North Dakota. Job Description & Requirements • Specialty: Respiratory Therapist, • Discipline: Allied Health Professional, • Start Date: 01/26/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, rotating, • Employment Type: Travel Genie Healthcare is looking for a Respiratory Therapy to work in Respiratory Therapist for a 13 weeks travel assignment located in Fargo, ND for the Shift (Rotating-Please verify shift details with recruiter, 19:00:00-07:00:00, 12.00-3). Pay and benefits packages are estimated based on client bill rate at time the job was posted. These rates are subject to change. Exact pay and benefits vary based on several things, including, but not limited to, guaranteed hours, client changes in bill rate, experience, etc. Benefits: Medical Insurance, Dental Insurance, Vision Insurance, 401(k) with company matching (50% up to 6% of what you contribute) Genie Healthcare Job ID #17629608. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Respiratory Therapy:Respiratory Therapist,19:00:00-07:00:00 About Genie Healthcare Genie Healthcare is one of the fastest growing Nurse Travel Agencies in the USA. Genie serves hundreds of facilities and has over 4000 current travel RN contracts open at any given time. \n\n Genie provides travel RN’s flexibility, support, top pay scale, housing and the #1 rated, multi-state health insurance coverage. \n\n Genie Healthcare carries with it a commitment to providing a comprehensive level of service and quality care. Growing from a small team of eager recruiters to a company with satisfied clients in nearly every corner of the nation, delivering excellence in patient and customer care is the key to Genie’s success. \n\n The management team has 20 years of experience in workforce solutions and staffing in medical and non-medical fields, roles ranging from Clerical job to Cardiologist to software developer to CEO.

Vibra Travels is seeking a travel nurse RN PCU - Progressive Care Unit for a travel nursing job in Fargo, North Dakota. Job Description & Requirements • Specialty: PCU - Progressive Care Unit, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights Benefits/Perks of working with VIBRA TRAVELS: • Work with 1 recruiter from start to finish and assignment to assignment, • Local and Non-local positions available, • Competitive hourly rate in addition to tax-free stipend (if applicable), • No pay cuts mid-contract, • Referral bonus (up to $1000 per referral!), • License reimbursement if traveling to new state where new license is required, • Your pick of assignments at facilities we own and operate nationwide (70+) or partner facilities Qualifications/Skills: • Current BLS certification from a Vibra-approved vendor required., • Additional certifications may be required by Vibra Travels (ex ACLS, PALS, NRP) Additional Qualifications/Skills: • Previous acute care experience is strongly preferred., • Ability to project a professional image., • Knowledge of regulatory standards and compliance requirements., • Strong organizational, prioritizing and analytical skills., • Ability to make independent decisions when circumstances warrant., • Working knowledge of computer and software applications used in job functions., • Freedom from illegal use of and effects of use of drugs and alcohol in the workplace As an employee of Vibra Travels, you will be eligible to enroll in Medical and Prescription benefits once you meet the eligibility requirements outlined by the Affordable Care Act (ACA) Vibra Travels Job ID #20251028-51. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Vibra Travels Regardless of the placement you’re seeking, you’ll experience the same great benefits when choosing Vibra Travels for your next contract. White-glove service, every step of the way: At Vibra Travels, we believe in providing top-notch service to our travel nurses. From the moment you first contact us, you’ll experience a level of support and care that sets us apart from the rest. Your recruiter, your partner: Unlike other travel nursing agencies, we believe in building one-on-one relationships with our clinicians. Your dedicated recruiter will be your advocate, guiding you through the entire process and ensuring your needs are met. Clinical support at your fingertips: We understand that being a traveler can sometimes be challenging. That’s why we have a dedicated clinical support team available to answer any questions or concerns you may have during your assignments. Nationwide placements, endless opportunities: With Vibra Travels, you’ll have access to placements across the nation. Whether you’re looking for an acute care, rehabilitation, critical care, or behavioral health hospital, we have opportunities waiting for you in every corner of the country. Join us today and experience traveling done different! Benefits • Holiday Pay, • License and certification reimbursement, • Medical benefits, • Referral bonus

Vibra Travels is seeking a travel nurse RN Med Surg for a travel nursing job in Fargo, North Dakota. Job Description & Requirements • Specialty: Med Surg, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights Benefits/Perks of working with VIBRA TRAVELS: • Work with 1 recruiter from start to finish and assignment to assignment, • Local and Non-local positions available, • Competitive hourly rate in addition to tax-free stipend (if applicable), • No pay cuts mid-contract, • Referral bonus (up to $1000 per referral!), • License reimbursement if traveling to new state where new license is required, • Your pick of assignments at facilities we own and operate nationwide (70+) or partner facilities Qualifications/Skills: • Current BLS certification from a Vibra-approved vendor required., • Additional certifications may be required by Vibra Travels (ex ACLS, PALS, NRP) Additional Qualifications/Skills: • Previous acute care experience is strongly preferred., • Ability to project a professional image., • Knowledge of regulatory standards and compliance requirements., • Strong organizational, prioritizing and analytical skills., • Ability to make independent decisions when circumstances warrant., • Working knowledge of computer and software applications used in job functions., • Freedom from illegal use of and effects of use of drugs and alcohol in the workplace As an employee of Vibra Travels, you will be eligible to enroll in Medical and Prescription benefits once you meet the eligibility requirements outlined by the Affordable Care Act (ACA) Vibra Travels Job ID #20251028-48. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Vibra Travels Regardless of the placement you’re seeking, you’ll experience the same great benefits when choosing Vibra Travels for your next contract. White-glove service, every step of the way: At Vibra Travels, we believe in providing top-notch service to our travel nurses. From the moment you first contact us, you’ll experience a level of support and care that sets us apart from the rest. Your recruiter, your partner: Unlike other travel nursing agencies, we believe in building one-on-one relationships with our clinicians. Your dedicated recruiter will be your advocate, guiding you through the entire process and ensuring your needs are met. Clinical support at your fingertips: We understand that being a traveler can sometimes be challenging. That’s why we have a dedicated clinical support team available to answer any questions or concerns you may have during your assignments. Nationwide placements, endless opportunities: With Vibra Travels, you’ll have access to placements across the nation. Whether you’re looking for an acute care, rehabilitation, critical care, or behavioral health hospital, we have opportunities waiting for you in every corner of the country. Join us today and experience traveling done different! Benefits • Holiday Pay, • License and certification reimbursement, • Medical benefits, • Referral bonus

Genie Healthcare is seeking a travel nurse RN Med Surg for a travel nursing job in Fargo, North Dakota. Job Description & Requirements • Specialty: Med Surg, • Discipline: RN, • Start Date: 02/09/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, rotating, • Employment Type: Travel Genie Healthcare is looking for a RN to work in MedSurg for a 13 weeks travel assignment located in Fargo, ND for the Shift (Rotating-Please verify shift details with recruiter, 19:00:00-07:00:00, 12.00-3). Pay and benefits packages are estimated based on client bill rate at time the job was posted. These rates are subject to change. Exact pay and benefits vary based on several things, including, but not limited to, guaranteed hours, client changes in bill rate, experience, etc. Benefits: Medical Insurance, Dental Insurance, Vision Insurance, 401(k) with company matching (50% up to 6% of what you contribute) Genie Healthcare Job ID #17632675. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN:MedSurg,19:00:00-07:00:00 About Genie Healthcare Genie Healthcare is one of the fastest growing Nurse Travel Agencies in the USA. Genie serves hundreds of facilities and has over 4000 current travel RN contracts open at any given time. \n\n Genie provides travel RN’s flexibility, support, top pay scale, housing and the #1 rated, multi-state health insurance coverage. \n\n Genie Healthcare carries with it a commitment to providing a comprehensive level of service and quality care. Growing from a small team of eager recruiters to a company with satisfied clients in nearly every corner of the nation, delivering excellence in patient and customer care is the key to Genie’s success. \n\n The management team has 20 years of experience in workforce solutions and staffing in medical and non-medical fields, roles ranging from Clerical job to Cardiologist to software developer to CEO.

Genie Healthcare is seeking a travel nurse RN Cardiac Cath Lab for a travel nursing job in Fargo, North Dakota. Job Description & Requirements • Specialty: Cardiac Cath Lab, • Discipline: RN, • Start Date: 01/19/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days, • Employment Type: Travel Genie Healthcare is looking for a RN to work in Cardiac Cath Lab (CCL) for a 13 weeks travel assignment located in Fargo, ND for the Shift (4x10 Days-Please verify shift details with recruiter, 07:00:00-17:00:00, 10.00-4). Pay and benefits packages are estimated based on client bill rate at time the job was posted. These rates are subject to change. Exact pay and benefits vary based on several things, including, but not limited to, guaranteed hours, client changes in bill rate, experience, etc. Benefits: Medical Insurance, Dental Insurance, Vision Insurance, 401(k) with company matching (50% up to 6% of what you contribute) Genie Healthcare Job ID #17618917. Pay package is based on 10 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN:Cardiac Cath Lab (CCL),07:00:00-17:00:00 About Genie Healthcare Genie Healthcare is one of the fastest growing Nurse Travel Agencies in the USA. Genie serves hundreds of facilities and has over 4000 current travel RN contracts open at any given time. \n\n Genie provides travel RN’s flexibility, support, top pay scale, housing and the #1 rated, multi-state health insurance coverage. \n\n Genie Healthcare carries with it a commitment to providing a comprehensive level of service and quality care. Growing from a small team of eager recruiters to a company with satisfied clients in nearly every corner of the nation, delivering excellence in patient and customer care is the key to Genie’s success. \n\n The management team has 20 years of experience in workforce solutions and staffing in medical and non-medical fields, roles ranging from Clerical job to Cardiologist to software developer to CEO.

PRACTICE SPECIFICS Our Gastroenterology section is seeking one BE/BC Gastroenterologist as part of a planned expansion. Our hospital serves a 132-bed tertiary referral center. Services onsite include a 24-hour Emergency Department with Level II trauma designation. The facility features a state- of-the-art endoscopy unit. An IM hospital services manages all inpatient GI admissions. GI functions as a consultative service. Five NPs/Pas support the outpatient GI clinic and the inpatient GI consultation service. This position provides a 1:4 call schedule. ERCP is required. • Our current group includes two Gastroenterologists working in a 100% consultative practice., • State-of-the-art Digestive Health Center performing a full spectrum of endoscopy procedures., • All GI hospital admissions are managed by IM hospitalist service, • University of North Dakota medical school affiliation., • Teaching and outreach opportunities available., • Advanced endoscopic practice including ERCP with EUS capability, • Excellent school districts, ability to live in an urban or rural environment and be minutes from work., • Olympus 190 scopes with CO2 are utilized in addition to Provation and Epic software., • Tort reform state, no buy-in, no malpractice, no overhead, • BC/BE in Gastroenterology, • ERCP preferred, • Centrally located on the border of North Dakota & Minnesota, 4 hours west of Minneapolis/St. Paul, • Fargo-Moorhead population: 250,000, regional Service area consists of 25 clinics & 5 hospitals, • Safe and family-friendly environment with an active downtown, great schools and various community activities!, • $600,284 Hired candidates may be eligible to receive additional compensation in the form of bonuses, quality incentives or production-based compensation. Essentia Health is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, sexual identity, national origin, disability, or protected Veteran Status. Search or Apply online at ___ or contact: Laurie Swor, Senior Physician Recruiter Phone (work): 218-786-1774 Email: Employee Benefits at Essentia Health: At Essentia Health, we’re committed to supporting your well-being, growth, and work-life balance. Our comprehensive benefits include medical, dental, vision, life, and disability insurance, along with supplemental options to fit your needs. We offer a 401(k) plan with employer contributions to help you plan for the future, and we invest in your professional development through training, tuition reimbursement, and educational programs. To help you thrive both at work and at home, we provide flexible scheduling, generous time off, and wellness resources focused on your physical, mental, and emotional health. Please note that benefit eligibility may vary. For full details, refer to your benefit summary or contact our HR Service Center at (218) 576-0000. Job Location: 32nd Avenue Building Shift Rotation: Day/Eve/Night Rotation (United States of America) Shift Start/End: / Hours Per Pay Period: Compensation Range: Union: FTE: 1 Weekends: Call Obligations: Sign On Bonus:

Our Gastroenterology section is seeking one BE/BC Gastroenterologist as part of a planned expansion. Our hospital serves a 132-bed tertiary referral center. Services onsite include a 24-hour Emergency Department with Level II trauma designation. The facility features a state- of-the-art endoscopy unit. An IM hospital services manages all inpatient GI admissions. GI functions as a consultative service. Four NPs/Pas support the outpatient GI clinic and the inpatient GI consultation service. This position provides a 1:4 call schedule. ERCP is preferred. • Our current group includes two Gastroenterologists working in a 100% consultative practice., • State-of-the-art Digestive Health Center performing a full spectrum of endoscopy procedures., • All GI hospital admissions are managed by IM hospitalist service, • University of North Dakota medical school affiliation., • Teaching and outreach opportunities available., • Advanced endoscopic practice including ERCP with EUS capability, • Excellent school districts, ability to live in an urban or rural environment and be minutes from work., • Olympus 190 scopes with CO2 are utilized in addition to Provation and Epic software., • Tort reform state, no buy-in, no malpractice, no overhead, • BC/BE in Gastroenterology, • ERCP preferred Employee Benefits at Essentia Health: At Essentia Health, we’re committed to supporting your well-being, growth, and work-life balance. Our comprehensive benefits include medical, dental, vision, life, and disability insurance, along with supplemental options to fit your needs. We offer a 401(k) plan with employer contributions to help you plan for the future, and we invest in your professional development through training, tuition reimbursement, and educational programs. To help you thrive both at work and at home, we provide flexible scheduling, generous time off, and wellness resources focused on your physical, mental, and emotional health. Please note that benefit eligibility may vary. For full details, refer to your benefit summary or contact our HR Service Center at (218) 576-0000. Job Location: 32nd Avenue Building Shift Rotation: Day/Eve/Night Rotation (United States of America) Shift Start/End: / Hours Per Pay Period: Compensation Range: Union: FTE: 0 Weekends: Call Obligations: Sign On Bonus:

Vibra Travels is seeking a travel Physical Therapist for a travel job in Fargo, North Dakota. Job Description & Requirements • Specialty: Physical Therapist, • Discipline: Therapy, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days Benefits/Perks of working with VIBRA TRAVELS: • Work with 1 recruiter from start to finish and assignment to assignment • Local and Non-local positions available • Competitive hourly rate in addition to tax-free stipend (if applicable) • No pay cuts mid-contract • Referral bonus (up to $1000 per referral!) • License reimbursement if traveling to new state where new license is required • Your pick of assignments at facilities we own and operate nationwide (70+) or partner facilities. 8 Hour Day and Night shifts currently available Duration 8 or 13 weeks Position Summary Responsible for providing and directing Physical Therapy services to patients, including assessment, treatment, program planning and implementation, related documentation, and communication in assigned locations. Functions under a physicians order. Position Supervisory Responsibilities Supervises the following positions: Physical Therapy Assistants and Rehabilitation Aides/Therapy Techs Position Qualifications Minimum Qualifications: Current, valid, and active license to practice as a Physical Therapist in the state of employment required. Current BLS certification from a Vibra-approved vendor required. A current, valid and active Driver’s License required. Ability to travel using publicly available air and ground transportation. One (1) year of experience as a PT required. ADDITIONAL QUALIFICATIONS/SKILLS: Ability to project a professional image. Previous Hospital experience preferred Knowledge of regulatory standards and compliance requirements. Strong organizational, prioritizing and analytical skills. Ability to make independent decisions when circumstances warrant. Working knowledge of computer and software applications used in job functions. Freedom from illegal use of and effects of use of drugs and alcohol in the workplace. Certificates, Licensures, Registrations Current, valid, and active license to practice as a Physical Therapist in the state of employment. Current BLS certification from a Vibra-approved vendor required. A current, valid and active Driver’s License required "Duration: 8- or 13-week options Per Federal Health Care Worker Vaccine Requirements, all employees must be fully vaccinated against COVID-19 or be approved for a valid religious or medical exemption. Anyone hired by the company must provide proof of their COVID-19 vaccine before they can begin employment or request and be approved for a valid religious or medical exemption. Unvaccinated employees on an approved exemption must submit to weekly COVID-19 testing and wear a respirator at all times while in the facility. Some states and locations require increased frequency testing pursuant to state regulations. The wage range for this role takes into account the wide range of factors that are considered in making compensation decisions including, but not limited to, skill sets, experience, education and training, licensure and certifications, and other business and organizational needs. It’s not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current (hourly for non-exempt) range is $45.50 to $50.50 (not including the stipend if applicable). Vibra Travels Job ID #20250818-07. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Vibra Travels Regardless of the placement you’re seeking, you’ll experience the same great benefits when choosing Vibra Travels for your next contract. White-glove service, every step of the way: At Vibra Travels, we believe in providing top-notch service to our travel nurses. From the moment you first contact us, you’ll experience a level of support and care that sets us apart from the rest. Your recruiter, your partner: Unlike other travel nursing agencies, we believe in building one-on-one relationships with our clinicians. Your dedicated recruiter will be your advocate, guiding you through the entire process and ensuring your needs are met. Clinical support at your fingertips: We understand that being a traveler can sometimes be challenging. That’s why we have a dedicated clinical support team available to answer any questions or concerns you may have during your assignments. Nationwide placements, endless opportunities: With Vibra Travels, you’ll have access to placements across the nation. Whether you’re looking for an acute care, rehabilitation, critical care, or behavioral health hospital, we have opportunities waiting for you in every corner of the country. Join us today and experience traveling done different! Benefits • Holiday Pay, • License and certification reimbursement, • Medical benefits, • Referral bonus

Job Overview: The Maintenance Technician l will assume basic tasks relating to production. This position is responsible for assisting with troubleshooting equipment and making any necessary repairs. This position works Friday-Sunday 6:00AM-6:00PM Highlights of your role: • Work efficiently with work order system (EAM) to document repairs and PM maintenance throughout the plant., • Perform regular inspections and assist with repairs on any equipment in the facility., • Assist in the set up of new equipment; troubleshoot equipment using basic tools., • Maintain a clean and organized work environment., • Knowledge of pneumatics/hydraulics, electronics and controls, • Set up and assist with the setup of equipment You're a good fit if you have (or if you can):, • High School diploma or GED required, • Minimum of six months related experience and/or training required, • Must be able to obtain forklift and aerial lift platform licenses For more than a century, we’ve been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin’s quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. We take a better living approach with benefits to support you at work and beyond. From day one, you will enjoy health insurance, paid holidays, paid parental leave, a 401(k) retirement savings match and more! Some of our unique and most popular benefits include: • $300 annual wellbeing account to spend on what helps you feel happy + healthy, • Better Living Day! (a paid day off to go have some fun), • Annual profit sharing – recognizing everyone’s contribution to Marvin’s success, • Giving at Marvin – participate in organized volunteer opportunities

Job DescriptionJob Summary The Engineer I position in the Geotechnical Group will coordinate project services consistent with client’s needs by either performing or arranging qualified personnel to perform applicable project services with oversight and supervision (as required). The employee will perform field testing and evaluations, conduct laboratory testing and sample review, perform engineering analyses, prepare engineering recommendations and associated reports, and with oversight, manage AET project services for geotechnical projects. Project services may include soil borings, pavement cores, groundwater monitoring wells, pressure meter testing, infiltration testing, geotechnical instrumentation installation and monitoring, and load test observations, as well as laboratory soil and bedrock testing. All of this takes place within the framework of achieving the company's goals and vision. Essential Functions Reasonable accommodations or workable solutions may be made to enable individuals with disabilities to perform essential functions. • Prepare proposals and formal engineering reports., • Prepare and coordinate field work instructions, maps, planning, permitting, and project specific items., • Locate and mark soil borings, pavement cores, and perform site reconnaissance and utility meets., • Maintain client, project team, and in-house communication., • Make professional judgments with the support of senior staff members., • Perform test borings, pavement cores, and install geotechnical instrumentation as part of a field crew., • Conduct field observations of soil and/or bedrock and testing procedures., • Conduct geotechnical-related monitoring and testing, including instrumentation, settlement monitoring, load tests, infiltration testing, and pressure meter testing., • Perform laboratory testing on soil and bedrock samples., • Analyze and interpret data and samples collected from field and laboratory testing., • Prepare reports of field and laboratory work., • Interact successfully with a wide variety of people, work effectively within project teams, resolve issues and problems in a constructive manner, and work independently and within small teams in the field., • Conduct duties in a manner consistent with federal, state, and local regulations and AET’s QA and Health and Safety Policies. Supervisory Responsibility Provides work direction to field engineers, technicians, and drillers as coordinated with senior staff. Qualifications and Education Requirements • Bachelor’s degree in Civil Engineering, Geological Engineering, or other related engineering field., • 0-3 years of related experience., • Engineer in Training (EIT) registration required., • Knowledge of fundamental engineering or scientific principles within geotechnical and construction materials areas and ability to apply that knowledge to the job., • Communication skills sufficient to convey complex technical information in a clear manner to diverse audiences., • Maintain valid driver’s license and acceptable driving record.Preferred Skills, • Advanced experience using personal computer software, especially Microsoft Office., • Experience analyzing and interpreting data, accurately observing and recording field activities, reading plans and specifications as related to the position., • Experience determining and coordinating daily work schedule based on project priorities and client/department schedules., • Professional Engineering (PE) registration or ability to obtain registration preferred. Pay Transparency Base compensation is expected to be in the range of $68,000 and $85,000 per year based on skill set and experience. AET offers a comprehensive benefits package, including health benefits, insurance, Employee Stock Ownership Plan (ESOP), long term savings, paid time off, and professional development opportunities. The selected candidate must be authorized to work for any employer in the U.S. without requiring visa sponsorship now or in the future. Work Environment This job primarily operates in a professional office environment. This position also may require field work in outdoor conditions on construction sites with uneven ground and adverse weather conditions. This role routinely uses standard office equipment such as computers, phones, and photocopiers. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands or finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance, and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50-100 pounds. The employee will occasionally push or pull equipment weighing up to 200 pounds. The employee is required to frequently work outside. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Notice to Third Party Agencies: AET does not accept unsolicited resumes from third party recruiting firms. Absent a signed Service Agreement by AET’s Chief People Officer (CPO), AET reserves the right to pursue and hire these candidates without financial obligation to recruiters or agencies. Compensation details: 68000-85000 Yearly Salary PI23c20eb6e4fd-25405-34244801

Job Description POSITION SPECIFICATION Position: Structural Engineer III Department: Industrial, Processing and Agribusiness (IPA) Reporting Relationship: Manager, Structural Engineering COMPANY BACKGROUND KFI Engineers is a recognized industry leader in facility infrastructure design and performance. Since 1996, our culture of collaboration and unique capabilities have allowed us to make a difference in the way infrastructure and processing projects are delivered. Headquartered in St. Paul, MN, with numerous regional offices throughout the United States, and a team of hundreds of professionals, we offer opportunities to continue your career with mentorship programs, career growth support, and continued education. With KFI, we find a way to provide creative solutions to unique projects while providing the same care we would expect if we were the client. For more information about KFI Engineers and our culture, please visit . POSITION OVERVIEW & RESPONSIBILITIES The Structural Engineer III plays a key role in the successful execution of projects. This individual will provide technical and engineering excellence, as well as successful delivery of work to our customers. The Structural Engineer III is responsible for a high level of customer satisfaction by ensuring expectations are clearly communicated and managed – both externally and internally. The successful candidate will also contribute to a dynamic team environment by being proactive, communicating clearly to all stakeholders, and modeling a highly collaborative working environment. This person will also help support the business development process, through the writing of proposals and meeting with prospective and current customers. Specific responsibilities will include, but not be limited to, the following: • Serve as structural discipline lead for complete projects from start to finish., • Participate in business development – proposals, meetings with clients, interviews., • Effectively execute projects. Help develop estimates for assigned scope of work, and ensure we stay within scope and adhere to the overall project budget (KFI labor, expenses, and subs)., • Coordinate work with both internal and external stakeholders, providing technical support and work direction as needed., • Oversee the production of construction documents including drawings and specifications, ensuring the application of sound structural engineering principles., • Provide work direction to other team members (including subcontractors), and technical and engineering support to other departments/disciplines., • Other duties as assigned QUALIFICATIONS Required • Bachelor’s degree in Civil Engineering with an emphasis in Structural Design strongly preferred., • 10+ years of experience., • Must be legally authorized to work in the US on a permanent basis without the need for work sponsorship now or in the future., • Possess an understanding of Electrical, Mechanical, and Civil Engineering construction practices., • Strong structural design experience across a variety of industries (agribusiness and/or central utility) and materials (concrete and steel, masonry helpful)., • Experience using structural analysis software (RISA or similar)., • Demonstrated consistency in successful combination of design and/or project management., • Knowledge of computer technology and specific areas of application, including MS Office., • Excellent verbal and written communication, and meeting management skills., • Strong interpersonal skills and ability to collaborate with others., • Master’s degree in Structural Engineering., • Professional Engineer (P.E.) certification. Registration in multiple states, or ability to become registered in multiple states, is desirable., • Some work locations will feature the tough terrain typical of construction sites., • Travel: May include some domestic travel 1 to 2 days in duration – typically not exceeding 10% to 15% throughout the year. CORE BEHAVIORS Accountable • Demonstrates persistence in the achievement of goals., • Acts with a sense of urgency., • Demonstrates agility, adapts well to changes., • Works well under pressure., • Plans projects well, managing last-minute rushes and disruptions., • Balances Speed and Quality., • Looks for improvement in our delivery, tools and processes., • Keeps others adequately informed., • Exhibits objectivity and openness to others' views., • Balances team and individual responsibilities., • Shares expertise with others., • Inspires respect and trust. Benefits: At KFI, our comprehensive benefit program provides our employees with the resources to support their health, wellness and financial well-being. Full-Time employees have access to: • Health, dental and vision insurance coverage, • Virtual health services, • Health Savings Account (HSA) & Health Reimbursement Account (HRA) for HDHP enrollees with KFI contributions, • Flexible Spending Account, • 401(k) plan, • Short-term and long-term disability insurance, life and AD&D insurance, • Employee Assistance Program, • Paid Time Off to include Earned Sick and Safe Time in accordance with state laws, • Company Paid Holidays, • Tuition Reimbursement, • Bereavement Leave Please note this job description is not designed to cover a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position is not eligible for Visa sponsorship. Equal Opportunity Employer – Veterans and Disabilities

Job DescriptionTop Tier Engineering Firm looking for Construction Project Engineer/Managers This Jobot Job is hosted by: John Erwin Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $90,000 - $150,000 per year A bit about us: We are an employee owned team of planners, designers, and engineers delivering innovative and lasting solutions customized to solve our client’s unique challenges. Our award-winning projects range from designing roadways, trails, and bridges to planning statewide transportation systems, to revitalizing neighborhoods and urban spaces Why join us? • Competitive Salary, • Medical, Vision, Dental, • Flexible working hours, • 401k Match, • ESOP (Employee ownership/stakeholder after 1 year of employment), • Identity Theft protection, • Overtime compensation Job Details Job Details: We are on the hunt for a dynamic and motivated Construction Project Engineer/Manager to join our fast-paced Engineering team. The successful candidate will be responsible for managing large-scale construction projects, with a focus on roads, highways, bridges, and flood diversion systems. This role is ideal for a licensed Professional Engineer (PE) who has experience working with government municipalities, has a keen eye for quality control, and is comfortable handling billion-dollar projects. The Construction Project Engineer/Manager will play a pivotal role in ensuring the successful completion of our engineering projects, while maintaining the highest standards of safety and quality. Responsibilities: • Oversee all stages of project life cycle management, from planning and design to construction and completion., • Manage relationships with government municipalities and Department of Transportation Services (DOTS)., • Utilize Microstation software for project design and implementation., • Conduct field reviews and inspections to ensure compliance with project specifications and safety standards., • Coordinate with various teams and stakeholders, ensuring clear communication and successful project execution., • Implement and oversee quality control measures to ensure the highest standards are maintained., • Lead, mentor, and develop a team of engineers and other project staff., • Manage large-scale flood diversion and flood risk management projects, ensuring they are completed on time and within budget., • Bachelor's degree in Civil Engineering or a related field., • A valid Professional Engineer (PE) license., • Minimum of 3 years of experience as a Construction Project Engineer/Manager in the Engineering industry., • Proven experience managing large-scale construction projects, ideally within roads, highways, and bridges., • Familiarity with Microstation software., • Experience working with government municipalities and Department of Transportation Services (DOTS)., • Proven leadership and team management skills, with a focus on mentoring and development., • Strong knowledge of flood risk management and flood diversion projects., • Exceptional coordination and communication skills, with the ability to manage relationships with various stakeholders., • Strong commitment to safety and quality control., • Ability to handle billion-dollar projects with precision and integrity. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job DescriptionAbout Us "Inspired by Spaces, Empowered by People." At Enclave, we don't just build structures; we cultivate environments where our partners, team members, and communities flourish. Our very name reflects our essence - creating distinct spaces that inspires growth and success. As a unified real estate investment firm, Enclave brings together exceptional development, construction, and property management expertise to specialize in multifamily, industrial, and commercial developments across the Midwest and Mountain West. Our Growth Story: Since our founding in 2011, we've expanded to over 250 team members, completing more than 150 projects and managing assets exceeding $1.75 billion. Our rapid growth is a testament to the innovative and collaborative spirit that drives everything we do. For six consecutive years, Enclave has been recognized as one of the 50 Best Places to Work. This accolade reflects our commitment to fostering an environment where everyone feels valued, supported, and inspired to excel. About the Role Staff Accountant II As a Staff Accountant II, you will take ownership of more complex accounting functions and play a key role in supporting accurate financial reporting, process improvement, and compliance across the organization. You’ll independently manage reconciliations, month-end close activities, and provide analysis that supports financial decisions. This role is ideal for a detail-oriented and proactive accounting professional ready to deepen their impact and take the next step in their accounting career. Position Logistics • Primary Work Location: West Fargo, ND Headquarters, • Work Environment: On-Site, • Work Schedule: Monday - Friday | 8 am - 5 pm, • Work Type: Full Time (40 hours/week) Position Responsibilities:Financial Reporting & Month-End Close * Lead key components of the monthly, quarterly, and year-end close processes, including preparation of journal entries, accruals, and account reconciliations. * Prepare and review financial statements—including balance sheets, income statements, and cash flow statements—with a high degree of accuracy and attention to detail. * Perform detailed variance analysis to identify and explain fluctuations in revenue, expenses, and other key financial metrics. * Maintain and reconcile complex general ledger accounts across multiple business entities. Fixed Assets & Capital Accounting * Manage fixed asset accounting functions, including asset additions, disposals, depreciation schedules, and related audits. * Ensure compliance with internal capitalization policies and monitor the lifecycle of fixed assets and improvements. * Collaborate with development and operations teams to ensure accurate and timely accounting of capital expenditures. Accounts Payable & Financial Operations * Oversee accurate classification and coding of expenses; work with internal teams to investigate and resolve discrepancies. * Provide support to accounts payable and accounts receivable functions, ensuring accuracy and timeliness in transactional processing. * Partner with procurement and operations teams to align financial records with business activities and project budgets. Internal Controls, Compliance & Process Improvement * Ensure adherence to internal controls, accounting policies, and GAAP standards. * Identify opportunities for process improvements and work with stakeholders to design and implement solutions. * Support external audit and tax processes through preparation of schedules, reports, and documentation. * Maintain financial data integrity across accounting systems and platforms. Special Projects & Cross-Functional Support * Provide financial insights to support budgeting, forecasting, and strategic decision-making. * Assist with system upgrades, ERP enhancements, automation of financial reporting, and cross-departmental initiatives. * Serve as a resource and mentor for junior accounting staff, offering guidance on processes and technical accounting issues. General Responsibilities * Perform additional duties as assigned in support of department and company goals. * Participate in the general upkeep of personal and shared workspaces. * Maintain punctual and regular attendance, as required of all employees. We're Seeking Individuals Who Are: * Detail-oriented and analytical, with a passion for accuracy and a commitment to producing high-quality financial work. * Self-starters who take ownership of their responsibilities and demonstrate accountability in managing complex reconciliations and month-end close activities. * Problem solvers who enjoy investigating discrepancies, identifying root causes, and recommending solutions to improve financial processes. * Collaborative team players who work well across departments, fostering strong working relationships with operations, procurement, and other cross-functional teams. * Technically proficient, especially in Excel and accounting software, with the ability to adapt to new systems and tools. * Organized and efficient, capable of managing multiple priorities and deadlines in a fast-paced environment. * Eager to learn and grow, seeking to deepen their expertise in accounting and contribute meaningfully to company initiatives. * Proactive contributors who look beyond the task at hand, anticipating challenges and offering insights that support better decision-making. * Strong communicators, able to clearly convey financial concepts and collaborate effectively across all levels of the organization. * Ethical and reliable, maintaining the highest standards of integrity, compliance, and professionalism in all aspects of their work. Qualifications • Bachelor’s in business, Accounting, Finance, or related field., • 2+ years of relevant accounting experience, internship or prior entry level experience, • Familiarity with accounting principles and financial reporting, • Proficient in Microsoft Excel; experience with accounting software a plus, • Strong attention to detail and organizational skills, • Excellent communication and time management abilities, • Eagerness to learn and grow in a fast-paced accounting environment Total Rewards Approach Our salary ranges are established based on a combination of market data, internal equity, and the unique characteristics of our organization such as our size, revenue, and industry. Within the range, individual pay is determined by multiple factors including job-related skills, experience, and relevant education or training. At Enclave, we’re proud to offer a comprehensive benefits package that supports your personal well-being, professional growth, and financial future. Financial Wellbeing • Competitive pay with ongoing performance review, • Role specific bonus potential and/or commission programs, • 401(k) with company match, • Various supplemental insurance options, • Medical, dental & vision plans, • Company-paid life & disability insurance, • Health Savings Accounts (HSA) with employer contribution, • Dependent Care Flexible Spending Accounts (FSA), • Mental health resources & employee assistance programs, • Paid bereavement & parental leave program, • Tuition reimbursement and leadership development opportunities, • Team-building and community engagement opportunities, • Employee recognition programs, • Supportive, values-driven work environment Enclave provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer • Competitive salary, • Paid vacation/holidays/sick time - 15 days of vacation first year, • Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one, • Extensive product and on the job/cross training opportunities With outstanding resources, • Encouraging and collaborative team environment, • Dedication to safety through our Zero Harm policy Under general direction, this position manages a truck-based service business, grows the labor and material business including revenue, gross margin and service asset management. Deploys and maintains standardized tools, systems and support for the Service Team. Manages resources to maximize customer satisfaction and improve productivity and profitability. Effectively recruits, develops and retains employees. Ensures overall operational excellence and service growth. How you will do it: • Set and monitor goals for overall team growth and profitability., • Lead the efforts of the Service Team to ensure productivity, consistency and quality., • Respond and assist with the closure of warranty-related issues., • Manage customer relationships and drive issue resolution., • Assist with monthly forecasting and management of overhead accounts., • Maintain optimum team staffing levels through labor forecasting, planning, and management., • Recruit, hire and retain team staff., • Work with direct reports and Team Technical Leads to create effective development performance plans., • Communicate clear performance expectations, conduct quarterly one on one meetings and annual performance reviews for direct reports., • Approve time sheets for direct reports, ensuring pre-job checklists, daily debriefing, and monthly Near Misses are completed in a timely manner., • Perform all other necessary management tasks related bookings, Accounts Payables and Account Receivable., • Take responsibility for safety performance and program compliance., • Assist Service Team in identifying and actively pursuing opportunities for additional work through change orders. As a leader, you will need to communicate effectively with both internal and external customers, both verbally and in writing. Whether working independently or as part of a team, you will take ownership of issues and resolutions. You are comfortable simultaneously handling a large and diverse number of tasks with tact, cooperation, and persistence. Your proven organizational and time management skills mean you are able to regroup as priorities and objectives change. Customer satisfaction is your priority. Required Qualifications: • College degree or equivalent combination of education and experience., • A minimum of 10 years’ experience in the HVAC field. Preferred Skills/Education/Experience: • Bachelor’s in a technical field., • 5 years of supervisory experience and 1-2 years related site coordination and project management experience., • 5 years field experience in HVAC and/or building controls systems, including knowledge of digital HVAC controls., • Experience using service management software and financial accounting systems., • Excellent verbal and written communication skills., • Strong computer skills in a Microsoft Office environment., • Strong interpersonal and collaboration skills; ability to positively represent Johnson Controls and communicate with others at varying technical levels. HIRING SALARY RANGE: $89,000 -119,000 (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This role offers a competitive Bonus plan that will take into account individual, group, and corporate performance. This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at #LI-DS1

Job Description Do you have an eye for design, a head for structure, and a knack for building relationships? We’re looking for a full-time Truss Designer and Sales Representative to join a growing truss manufacturing team in Fargo, ND. If you're experienced in truss design and ready to combine technical skill with customer-facing sales, this is your chance to make a real impact and grow with a company that values precision, speed, and personality. What You'll be Doing: • Designing custom roof, floor, and wall truss systems for residential and commercial projects, • Collaborating closely with builders, contractors, and teammates to meet specs, codes, and deadlines, • Participating in both inside and occasional outside sales opportunities, • Communicating clearly and professionally with clients and internal teams, • Managing project documentation, revisions, and timely follow-through, • 3–5 years of hands-on truss design experience in both residential and commercial applications, • Alpine software experience (preferred); open to fast learners willing to train, • Outgoing, professional communicator who thrives in a collaborative, team-driven atmosphere, • Willing to work 40–50 hours per week to meet project timelines, • Open to relocating to Fargo, ND, • Competitive Pay: Based on experience, • Full Benefits: 401(k) with match, medical, dental, vision, life insurance, PTO, flexible spending & more, • Growth Potential: Join a stable, expanding company that values hard work, innovation, and strong teamwork, • Positive Culture: Team-oriented environment where your work is seen and valued

Job DescriptionDescription: The Transport Driver is responsible for safe and efficient transportation of product. The Transport Driver is an essential member of our organization as he/she is accountable for the handling of product, safe delivery of product, and meeting customer needs. The dependable and safety-conscious individual will be responsible for properly driving his/her truck and ensuring everybody’s safety. Requirements: Responsibilities and Duties • Drive and operate trucks., • Follow delivery schedules and communicate with dispatch., • Utilize electronic logs and dispatch software., • Perform pre and post trip inspections., • Load and unload the tank and handle hazardous liquids., • Verify loads for accuracy., • Transport the product safely to delivery site., • Properly complete required paperwork., • Adhere to safety regulations., • Communicate with customer upon delivery site., • Maintain equipment., • Representing the Northdale Brand and all the whole Northdale team., • The truck is Northdale’s biggest and most known billboard., • Driving safely and respectfully is extremely important, • The truck is your office Qualifications • High school diploma or equivalent., • CDL – Class A, • 21 years or older., • HAZMAT and Tanker endorsements required., • Specific skills:, • Traffic laws/DOT regulations/driving knowledge, • Ability to lift 80 pounds., • Ability to pass random drug tests., • Clean driving record with no DUI/DWI convictions in the past seven years., • Listening and verbal communication skills., • Dependability.

Be part of the future! We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference. What we offer: * Competitive Starting Pay * Paid Training * Global Advancement Opportunities * Company Vehicle (as applicable) * Referral Bonuses * Comprehensive Benefits * Medical/Dental/Vision insurance * Health Savings Account (HAS) * Life Insurance * 401(k) savings plan with company match * Short-Term and Long-Term Disability * Employee Assistance Program * Wellness Program * And More! What you will do: Under general direction, responsible for the service & repair, design, configuration, and operation of complete HVAC building control systems and other low voltage control sub-systems (i.e., lighting, nurse call, data networks, etc.) to meet the intent of the customers and JCI goals. Accountable for quality, timeliness and efficiency of Service & repair and designs. Develops complex software programs, commissioning and solving to ensure proper operations of the building control system. Provides detailed information and submittals to communicate design and operation to customers, consultants, Sales and Service team and subcontractors. How you will do it: • Designs, configures and services technically complex building control systems for the customers facility. Creates flow diagrams, sequence of operations, bill of material, network layouts and electrical schematics as required., • Develops and tests software programs necessary to operate the system per the customer's facility requirements., • Coordinates and creates necessary drawings and equipment schedules for submittals, service and/or installation., • Selects, orders, and tracks the delivery of materials for assigned jobs., • Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation., • Provides field change information to the team for the creation of as-built drawings and software., • Keeps management and JCI contractor or customer informed of job progress and issues., • Assists in performing site-specific training for owner / operator on the total building control system., • Participates in release meeting with sales and service operations. Performs value engineering to provide cost effective results while maintaining customer satisfaction., • May provide work direction to Service Controls Technician I and Senior I and Senior II Controls Technicians., • Adheres to safety standards. High degree of regard to employee and subcontractor safety What we look for: Required • Minimum of Ten (10) years of experience with programming, installing and/or commissioning controls systems including system-level controllers., • Demonstrated knowledge of the construction, service mechanical, electrical, or HVAC service industry., • Demonstrated knowledge and understanding of mechanical drawings, electrical wiring diagrams, control theory, automatic temperature controls, building automation systems and other building subsystems., • Demonstrated experience in the integration of low voltage building sub-systems using various industry protocols (i.e., Modbus, LON, BACnet, etc.)., • Ability to relate technical knowledge to a non-technical audience., • Demonstrated advanced computer skills required, particularly computer-related drafting tools, such as Visio. Preferred • Bachelor's degree in engineering, or an associate degree in a related technical field with seven years of relevant work experience required., • Understanding of IP networking for building automation systems. HIRING HOURLY RANGE: $30.29 - 45.87 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at ___ #TechHiring #LI-AD2

Be part of the future! We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to making a difference. What you will do Performs assigned system commissioning using Johnson Controls configuration and commissioning tools. Troubleshoots and resolves basic HVAC mechanical, electrical, and controls problems. Responds to basic warranty calls. How you will do it · Loads system-level controller software. · Performs more complex commissioning and system diagnostics from system-level controllers to end devices (i.e. sensors, actuators, etc.) and completes all required commissioning documentation · Keeps management and JCI contractor or customer informed of job progress and issues. · Calibrates systems requiring basic electronic test equipment. · Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation. · Documents changes and provides information for as built documentation. · Communicates with the JCI contractor or customer upon arrival and before leaving the work site. · Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety What we look for Required · 2-year degree in electronics, mechanical systems, computer technology, air conditioning or similar field or at least 3-5 years of industry experience or experience in servicing electronic and/or mechanical systems in the HVAC industry---- · Generally required knowledge includes HVAC controls systems, facilities management systems, site preparation, peripheral equipment installation and servicing techniques · Effective interpersonal skills to properly represent Johnson Controls to customers and other outside contacts in an ethical and professional manner. · Ability to explain technical information to technical and non-technical people. Leadership skills to support the activities of Mechanics working on non-complex, non-critical Building Automation equipment on a job site. · PC experience required and the ability to program HVAC related software. HIRING HOURLY RANGE: $ (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at ___ #TechHiring

Be part of the future! We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference. Work with an Award-Winning technology that delivers sustainability, safety, and health. What we offer * Competitive Starting Pay * On the Job Paid Training * Tuition Reimbursement * Global Advancement Opportunities with Unlimited Career Path * Company Vehicle (as applicable) * Referral Bonuses * Comprehensive Benefits * Medical/Dental/Vision insurance * Health Savings Account (HSA) * Life Insurance * 401(k) savings plan with company match * Short-Term and Long-Term Disability * Employee Assistance Program * Wellness Program * And More! What you will do Receive service calls from Service Resource Center, including a brief description of equipment/system malfunctions. Contact customer representative and ascertain equipment/systems problems. Perform service and repairs on sprinkler systems for commercial, industrial and residential applications. These include but are not limited to wet (steel, copper and CPVC), dry, pre-action, deluge and fire pumps. How you will do it * Follow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc. in order to diagnose and repair equipment. * Read and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics and operational product manuals. * Demonstrate a high level of customer service, with strong organizational skills, positive attitude, and an ability to learn quickly. * Must have the ability to work alone. What we look for Required * 7-10 years of documented experience in Fire Sprinkler industry performing service and repair to Sprinkler and Suppression systems * High School Diploma or equivalent required * Ability to work flexible hours including weekends to meet customer requirements * Overnight travel may be required * Must maintain truck inventory to ensure timely response to customer needs * Must adhere to, implement, and follow safety guidelines and procedures at all times * Possess a valid driver’s license and driving record that meets company requirements * Follow verbal and written instructions * Capable of performing physical labor to include carrying and moving equipment and tools weighing up to 70 lbs. * Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 60 feet, working within ducts, crawl spaces, above ceilings, etc. * Must be able to follow, read and understand all safety requirement of the company and the customer Preferred * NICET Level II certification is a plus * Backflow certification is an asset $24 - $30 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at #TechHiring

Job DescriptionAbout Speechify At Speechify, our mission is to ensure reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products—including apps on iOS, Android, macOS, Chrome, and web—to listen to PDFs, books, docs, and web content faster, smarter, and more joyfully than ever before. Our product has earned recognition from Google (Chrome Extension of the Year) and Apple (App of the Day and 2025 Inclusivity Design Award) for its impact and accessibility. We're a fully remote, distributed team of engineers, designers, researchers, and product builders from world-class companies like Amazon, Microsoft, Google, Stripe, and more. We move fast, ship often, and love solving real user problems. Role Overview As a Software Engineer on the macOS team, you'll help build and scale Speechify's core desktop experience for millions of users. You'll own significant parts of our macOS app architecture, ship production-ready code, and collaborate closely with product, design, and engineering teams across the company. This is a key role for someone who thrives in a fast-paced startup environment, enjoys making high-impact product decisions, loves delightful user experiences, and has a passion for accessibility and performance. What You'll Do • Lead key engineering and product decisions for the macOS app., • Write, test, and ship production-quality code that scales to millions of users., • Maintain and evolve complex app architecture with a focus on performance and stability., • Work within a cross-functional team, partnering with designers and PMs to shape features from concept to launch., • Participate in product planning and roadmap discussions., • Demonstrated experience shipping macOS (or related desktop) applications used by many customers., • Strong engineering instincts with a deep focus on user experience., • A strategic mindset for building great products—not just writing code., • Ability to work quickly, decide what to build now vs. later, and iterate fast., • Swift / SwiftUI (macOS) proficiency., • Solid understanding of AppKit, macOS frameworks, and desktop-specific UI paradigms., • Strong understanding of concurrency and asynchronous execution models, • Familiarity with Bitrise, CI/CD workflows (e.g., Xcode Cloud, GitHub Actions)., • Impact & Ownership: Build and influence a product used by millions globally., • Remote First: Flexible, asynchronous work culture., • Growth & Leadership: Flat org — leadership is earned by impact, not title., • Collaborative Environment: Work with smart, passionate engineers and designers. If this sounds like your kind of challenge, we'd love to hear from you. Apply with your resume and links to your portfolio or GitHub! Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job DescriptionA Civil Engineer Intern typically works under the supervision of experienced civil engineers and assists with various tasks related to civil engineering projects. This position provides hands-on experience in the field and/or office, helping interns develop practical skills and a deeper understanding of the industry.Experiences and Responsibilities: * Assist in Design and Planning: Help senior engineers in the design and planning of civil engineering projects, including roads, bridges, buildings, or utilities. * Drafting and Modeling: Use software tools like AutoCAD or Civil 3D to assist in drafting design plans, blueprints, and 3D models for various engineering projects. * Conduct Site Inspections: Assist with site visits and inspections to ensure that projects are being built according to design specifications and regulatory standards. * Documentation and Reporting: Help prepare technical reports, progress updates, and maintain records of project developments and modifications. * Collaborate with Teams: Work with multidisciplinary teams, including construction managers, and project managers, to ensure projects are on track and meet deadlines. * Learning & Development: Attend training sessions and meetings to learn about the latest trends in civil engineering and construction management. Requirements: Education: Current enrollment in a Bachelor’s or Master’s degree program in Civil Engineering or a closely related field. The employee is regularly required to: Sit, stand, walk, stoop, kneel, twist, crouch, and crawl Use hands to handle, or feel objects, tools, or controls; and reach with hands and arms Talk or hear and communicate clearly The employee must: • Be able to occasionally walk on uneven terrain up to two miles per day, • Frequently lift and move up to 10 pounds and occasionally lift and move up to 25 pounds and infrequently up to 50 pounds This job description is not meant to be all-inclusive or restrictive and other duties may be assigned. It is a description of the job as presently defined and is subject at any time to revision. This document is intended to describe the general nature and level of work being performed by individuals assigned to this classification. This is not to be construed as an exhaustive list of all responsibilities, duties, and skills required. Individuals may be required to perform duties outside of their normal responsibilities, as needed. At KLJ, we have a vested interest in the personal, financial, and professional goals of our employees. The salary for this position is expected to range between $18-25/hour. Factors that may be used to determine actual salary include education (or applicable experience), training, job location, competencies relevant to the role, and internal equity. We offer a competitive full suite benefit package including health, dental, vision, and life insurance, performance bonus, 401k, employee stock ownership program and a flexible work environment that gives you options to support excelling both professionally and personally. The options available for the current year are described at . All applicants must be authorized to work in the US, without employer-sponsorship. KLJ does not offer employment based VISAS. KLJ will not be partnering with third-party recruiters on this position. Please review our third-party recruiting policy at . Position will be posted until filled.

Job DescriptionCrafting Brighter Futures for Families Positioned at the forefront of specialized financial services, our company helps families safeguard their assets and promise a profound purpose: ensuring a brighter future for every client. Role Overview: As a remote Benefits Representative, you play a pivotal role in helping families protect their assets and secure their futures. You'll be the face of our company, embodying our values and commitment. Primary Responsibilities: * Engage with clients to understand their financial goals and concerns. * Present tailored solutions to safeguard their assets effectively. * Maintain a pulse on the industry, ensuring you offer the best and most updated advice. * Foster relationships and ensure our clients always have someone they can turn to. Why Work With Us? * Remote Work: Enjoy the benefits of a work-from-home full-time role that has flexible hours. * Unlimited Earning Potential: Your dedication determines your earnings*. * Company Culture: At our company people are ambitious but respectful, high-energy, and treat every member like family. We do (optional) company outings frequently! * Grow with Us: Dive into continuous learning and development opportunities. Application Process: 1. Submit Your Application: No stringent qualifications needed. We believe in potential., 2. Virtual Company Overview: Once your application is in, you'll receive an invite to a virtual overview, detailing everything you need to know about the position. This session lasts 20-30 minutes, and you can self-schedule at your convenience, often on the same day. * When will I hear back after applying? Typically, within 24 hours. * Is there any specific software I need for the virtual overview? No, our platform is accessible through any standard web browser. Details will be provided in the invitation. * What's the growth trajectory for a Benefits Representative? Our focus is on continuous learning and development. Many of our reps have seen exponential career growth within our organization. • This is a commission only role with average earnings of $65,000+ in the first year and uncapped room for rapid growth based on performance. State and federal laws require licensing to sell certain insurance products. Ability to obtain a license is required.

Job DescriptionCompany Description Worldwide TechServices is a global leader in delivering technology services and solutions to the world’s most demanding clients. Headquartered in Billerica, MA; we provide infrastructure services and professional services to the world’s leading technology providers, outsourcers, large and small businesses and consumers. Job Description The Dynamic PC Support is a position that performs tasks related to the repair of a variety of client products. Performs basic and moderately complex troubleshooting activities for desktops and laptops. May support Desk Side applications and infrastructure. Interacts directly with clients to address technical issues and respond to them timely and accurately. Responsibilities • Provide customer support for designated equipment, • Answer client questions in a professional manner, • Accept and deliver all service calls assigned within the established service level agreement for each client, • Meet established customer service satisfaction criteria as outlined in established guidelines and policies, • Complete all administrative tasks associated with each call as documented in established policies and guidelines, • Complete real-time reporting of all calls as documented in established policies and guidelines, • Follow various established policies, guidelines, and documents relating to the successful delivery of service for each client, • Ensure control of assets and inventory through prompt turnaround of parts and equipment as required by client service agreements, • Report all activity in an accurate and timely manner, • Understand all Safety policies and guidelines and work within the guidelines of policies daily, • Additional requirements may exist if offer of employment is extended, • Other duties may be assigned to meet business needs Qualifications Education and Experience: • Typically requires technical school certification or equivalent and 0-2 years of relevant experience, • Previous customer service experience is a plus Certifications and/or Qualifications: • Maintain all required OEM Certifications as directed by Management, • Knowledge of relevant software and hardware, • Valid Driver’s License and reliable transportation with valid registration and adequate insurance Skills: • Ability to communicate regarding technical issues with clients, • Ability to drive to client locations, • Ability to drive long distances, and occasional overnight assignments within other geographies, • Ability to lift and or move various computer equipment up to 50 lbs, • Must own a basic repair tool kit Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Office Location: Fargo, ND Primary responsibilities include working as a key project team member on municipal projects from the planning phase through design and construction. A Graduate Engineer shall be capable of independently and collaboratively contributing to the design and development of project plans, specifications while working with project team members. Graduate Engineers typically report to a Project Manager or Senior Engineer. Additional responsibilities will include taking on the role of resident project representative (RPR) in the field during construction projects as necessary. Typical Tasks and Duties: • Provide professional civil engineering services for clients by providing planning, design, specifications, plans, reports, construction observation and project management., • Communicate frequently and effectively with supervisors and project managers on a consistent basis by providing updates and progress during all phases of projects, • Attend company meetings, project meetings and client meetings on a regular basis., • This position will require a limited role initially in preparing proposals and participating in interviews for securing work for the firm. Responsibilities for business development will increase with experience and mentoring by senior staff., • This position will require the initiative to think independently and make rational judgment calls., • Expect to take on and understand the role of the project engineer and the owner’s on-site representative on construction projects., • Work with Apex team members on the development of project plans and specifications., • Understand and follow company CADD procedures., • Understand and follow company employee handbook and mandated safety policies., • Perform responsibilities in a conscientious, legal and ethical manner with a strong attention to detail., • Must be able to work independently and in a team environment., • Participate in professional organizations and community leadership programs., • Travel and out of town stays may be required; may work overtime especially during the construction season., • Bachelor of Science Degree in Civil Engineering required., • Engineer-in-Training (EIT) certified, or ability to obtain certification within one year., • O-5 Years of experience working as a Civil Engineer., • Excellent written and verbal communication skills required., • Must be detail oriented, self-motivated with strong interpersonal and organizational skills., • Flexible working style and willingness to occasionally modify personal schedules as required to meet deadlines and/or client needs., • Proficient using Microsoft Windows/Office products (Word, Excel, Outlook, PowerPoint)., • Working knowledge and willing to become proficient in AutoCAD/Civil-3D and Microstation/GeoPak design software required., • Experience with other CADD software such as Google-SketchUP Pro or ARCMap GIS considered a plus., • Experience in the development of civil design drawings, specifications and cost opinions is a plus., • Ability to operate a computer under normal ergonomic office conditions., • Required to work in an outdoors environment during construction season., • May require prolonged periods of standing and walking to perform some of the typical tasks and duties associated with construction observation or surveying., • Required to lift and move up to 10 pounds and occasionally lift and move up to 50 pounds., • Must work scheduled and required hours. We offer a competitive salary and a comprehensive benefits package, which includes: • Performance-based bonuses, • Health, dental, and vision insurance, • Life insurance, • 401(k) plan with employer match and profit-sharing contribution, • Paid parental leave, • Flexible Spending Accounts (FSAs) and Health Savings Accounts (HSAs), • Paid time off, • Short- and long-term disability coverage EOE/AA Please email with any questions. Powered by JazzHR DN7mQkJtAW

We are not working with external recruiters or search firms for this position - please do not reach out. Company Overview: Renova One unites 11 trusted companies under one brand, delivering seamless renovation and restoration solutions for multi-family, single-family, and commercial properties nationwide. With expertise in flooring, carpet cleaning, turnkey solutions, interior and exterior renovations, restoration, and design, we simplify projects while maintaining exceptional quality. Built on integrity, innovation, and strong partnerships, Renova One is more than a vendor - we’re a trusted partner committed to enriching spaces and creating lasting value. Position Summary: The Operations Specialist is responsible for supporting daily operational functions, ensuring efficient workflow, and assisting in the coordination of projects and processes. This role involves working closely with the operations team, field staff, and leadership to maintain smooth business operations, troubleshoot challenges, and implement process improvements. Responsibilities & Duties: • Lead the coordination and execution of day-to-day flooring operations to ensure efficiency and accuracy, • Support the operations team with scheduling projects, resource allocation, and workflow optimization, • Assist in other operational responsibilities such as estimating, quality assurance, and warehouse duties, • Maintain accurate records, reports, and documentation related to operational activities, • Monitor project progress and communicate updates to relevant stakeholders, • Assist with vendor and subcontractor coordination to ensure timely completion of projects, • Identify and resolve operational challenges by implementing process improvements, • Ensure compliance with company policies, safety regulations, and industry standards, • Collaborate with team members across departments to support company objectives, • Monitor inventory levels, track shipments, and coordinate deliveries to ensure adequate stock levels and timely fulfillment of orders, • Manage administrative tasks, such as data entry, filing, and documentation, to maintain accurate records and support operational efficiency Qualifications: • At least 3 years of experience in operations support or a similar role, preferably in flooring installation, but other construction knowledge/experience acceptable, • Strong problem-solving and organizational skills, • Proficiency in Microsoft Office Suite and operational management software, • Ability to analyze data, generate reports, and improve processes, • Excellent communication and teamwork skills, • Ability to adapt to changing priorities and work in a fast-paced environment Other: • All offers of employment are contingent upon a background check, • Valid Driver's License is required, • Your information will be kept confidential according to EEO guidelines We are not working with external recruiters or search firms for this position - please do not reach out.

Enterprise Medical Recruiting is assisting a large health system in Fargo ND to add a BC/BE Gastroenterologist as part of a planned expansion. The practice includes 2 MDs, 4 APPs, and support staff. Practice Highlights • Outpatient clinic + inpatient consultations only, • 1:4 call, • ERCP required, • Opportunity to teach via Uni of North Dakota medical school, • Provation and EPIC software, • Generous salary Known as the North of Normal, Fargo boasts an up-and-coming, entrepreneurial spirit to the community and the area spans three cities (Fargo, Moorhead, and West Fargo) and two states separated by the Red River of the North. There are canoe parades in the fall, gorgeous wineries along the prairie, and vintage markets on Downtown streets. The rooftop patio views of the sunsets cannot be beaten, and the inspired food and crafted drinks are a perfect match. Immerse yourself in the historical Stave church and Hjemkomst Viking ship, the downtown murals, and step back in time at Bonanzaville, the pioneer village. ZW-5

Cascade of specifications from system to components to software requirements, software unit test cases (MIL-SIL), software integration test strategy and delivery of product design to the specification. Maintains working knowledge of safety policies and regulations to ensure duties of self and others

Job Description Azure Engineer plays a key role in the design, development, and management of our Azure infrastructure. This position is responsible for managing, maintaining, and enhancing Azure public cloud environments. The ideal candidate will have hands-on experience in provisioning and troubleshooting Azure infrastructure resources, as well as strong skills in identifying and resolving complex issues efficiently and professionally. In this role, the Azure Engineer will contribute to building new environments for our cloud customers and ensure that these environments are developed and maintained for high availability, scalability, and ease of maintenance. Collaboration with customers will also be an important part of the job, particularly when scheduling maintenance windows and coordinating change management activities. Pod: Azure Delivery Leader: Cloud Implementation Leader Location: Tampa, FL (hybrid), Fargo, ND (hybrid), US (remote), Poland (remote), Ukraine (remote) Working Schedule: EST office hours All new hires in North America complete in-person onboarding at our Tampa office, which typically lasts 3 to 5 days. Responsibilities: • Implement, support, and maintain 24x7 Azure CSP environments, RDS deployments and Windows technologies., • Make ongoing recommendations of Azure and Windows policies and standards – strategic planning., • Manage multiple large-scale projects in a fast-paced challenging environment and provide leadership to other members of the team., • Quickly convert business problems into technical solutions and opportunities., • Resolve Azure, Windows, and RDS escalations from clients and other team members., • Collaborate with customers and team members to troubleshoot and resolve issues., • Maintain and prioritize incidents, ensuring timely resolution., • Manage configuration and deployment of Azure resources in compliance with established technology policies., • Recommend technical solutions that will enhance performance, increase redundancy, and add flexibility to the existing infrastructure., • Troubleshoot Azure and Windows performance issues., • Maintain system availability and monitoring of critical services., • Maintain appropriate relationships with 3rd party vendors and evaluate vendor software, and communications products to provide recommendations to leadership., • Regular participation in change control activities that comply with ITIL change management., • Establish upgrade and backup strategies for core infrastructure., • Participate in on-call rotation as needed., • Experience:, • 4+ years' experience implementing and supporting Azure, Windows, and RDS technologies., • Technical Knowledge:, • Extensive knowledge of Windows technologies: RDS, IIS, GPO's, Active Directory., • Working knowledge of NetScaler Load Balancing solutions and Azure networking., • Working knowledge of Microsoft CSP program and Lighthouse., • M365\SharePoint support and implementation., • AVD support and implementation., • Powershell\Automation experience., • Experience with ASR/DR testing and failovers., • AZ-104 certification., • Working knowledge of M365 infrastructure and management., • Positive attitude, enjoy challenging solutions involving Azure, Citrix and Window architecture and maintenance., • Analytical Skills:, • Strong data analysis and reporting skills, with the ability to create and interpret sales KPIs., • Initiative-taker who can work independently on complex issues., • Ability to coordinate multiple tasks simultaneously., • Demonstrated capability to achieve results under pressure., • Communication:, • Fluent in English, • Demonstrates communication and interpersonal skills, with experience building relationships across teams. ABOUT ENAVATETransforming Businesses and the Lives They Touch At Enavate, we are more than just a Microsoft Gold Partner—we're a trusted partner in Enterprise Resource Planning (ERP) consulting, Cloud services, and managed services. We help businesses embrace the future by guiding them through ERP implementations, migrations to the cloud, and integrations that streamline their operations, allowing them to thrive in an ever-evolving business landscape. Our work isn't just about technology—it's about transforming the way businesses operate, empowering them to grow, innovate, and succeed. By partnering with our clients, we provide peace of mind, enabling them to focus on what matters most while we handle the complexity of their systems and processes. To learn more about what we do and how we make an impact, please check out our "What We Do?" 1-pager. Our Culture Whether you're joining us in North America, Europe, or beyond, Enavate offers a dynamic and collaborative environment where you'll have the opportunity to make a real impact. At Enavate, we're driven by our core values, and our people are at the heart of everything we do: • Team Members: We take care of our own., • Innovation: We explore, evolve, and seek excellence at every level., • Results: We are achievers who set high goals and reach them. To gain a deeper understanding of our values and the environment we foster at Enavate, take a look at our "Enavate Culture" Guide. What We Offer At Enavate, we're committed to providing a supportive and rewarding environment that empowers you to thrive both professionally and personally. Here's a glimpse of the benefits and perks you'll enjoy as part of our team: For more details about the benefits available in your region, check out the following links: • USA Benefits Guide, • Europe Benefits Guide We prioritize hiring candidates who are based in or near these locations. For team members based in Tampa and Fargo, we encourage team members to spend at least three days per week in the office to foster collaboration, connection, and contribute to our vibrant team culture. All North American new hires are onboarded in person at our Tampa office. Onboarding typically lasts 3 to 5 days, depending on the role, and provides a dedicated opportunity to connect with your leader, teammates, and our company culture. Our Hiring Process At Enavate, we take a thoughtful approach to hiring that ensures a great fit for both you and us. Our process includes: • Intro Call – A brief conversation to get to know you, discuss your background, and determine if there's a mutual fit., • Predictive Index Assessment – We use the Predictive Index to understand your natural strengths and how they align with the role and our team dynamics., • Interviews – A combination of technical and cultural interviews, focused on your expertise, problem-solving abilities, and alignment with our core values., • Debrief – Our team will come together to discuss your fit for the role and next steps. Enavate is an Equal Opportunity employer. This commitment applies to all candidates and employees regardless of race, ethnicity, citizenship, creed, place of origin, religion, sex, gender identity, gender expression, sexual orientation, family status, marital status, disability, age, and any other protected characteristic. Accommodation requests can be made at any stage of the recruitment process, and during employment by contacting our Talent Acquisition team. Join Us in Our Mission! At Enavate, we believe in transforming businesses and the lives they touch – because to us, it's personal. If you're ready to make an impact, we invite you to be part of a team that listens, challenges, collaborates, and takes action. Together, we're reshaping the future of ERP and how businesses operate, offering fresh perspectives and innovative solutions. Are you ready to transform your career and help us shape the future? Enavate is the place for you.

Job DescriptionSalary: 65000-80000 annually TENAX Technologies is currently seeking a skilled Systems Administrator to maintain servers, data storage, computers, and software applications in service of the Air National Guard (ANG) Remotely Piloted Aircraft (RPA) Special Operations Center (SOC). The Systems Administrator will interface with fellow contractors, military personnel, and government clients in support of server, computer, and software systems in addition to providing direct hands-on expertise to install and maintain system architectures for the RPA-SOC, which operates 24/7/365. The ideal candidate will have a solid understanding of hardware and software systems, video encoding and recording, communications systems, and enhancement support for operations. Key Responsibilities Maintain the availability, reliability, operations, and administration of the RPA-SOC servers, data storage, computers and software applications supporting RPA missions. Backup data and key equipment configurations, deploy patches as directed by program management office, and perform Active Directory Administration. Analyze, troubleshoot, and maintain RPA-SOC computer and server systems including troubleshooting hardware, software, operations support for Microsoft Windows and other operating systems at multiple classification levels. Ensure proper configuration of servers, virtual servers, storage solutions, computer, and software necessary for the successful operation of the RPA-SOC while staying in base line compliance requirements. Determine hardware, software, system functionality, test and modify workstations and programs based on user specifications. Many of the systems are unique, one of a kind that are constantly evolving to meet mission needs. Participate in on-call rotation for after-hours support. Requirements +/- 5 years of experience with SAN (Storage Area Network), Server/Virtual Server, backups/data retention, software installation/patching, and Active Directory administration Experience with Server/computer hardware/operating systems, video encoders/decoders, storage solutions on Commercial-off-the-shelf (COTS) equipment like Dell. Knowledge of industry best practices for implementing, and maintaining security and service availability throughout the system life cycle Ensure software and equipment meet applicable security technical implementation guides (STIGs) Identify technical applicability, remediate, and support mitigation of IAVA notices and support metric reporting. Experience in VMWare virtualized environment. Support and engage in programs, projects and practices and strategy, and comply with all policies and procedures. Follow industry and department trends and developments to ensure services are consistent with, and/or superior to, industry best practices. Knowledge of computer networking and network-based information assurance devices This position involves work typical of an office environment with no unusual hazards. There is occasional lifting up to 30 pounds. Ability to work independently and in a team environment. Strong problem-solving skills. Clearance Requirement: An active TS clearance with eligibility for TS/SCI is required. Mandatory Requirement: Security+ CE Certification or similar DOD 8140 IAT II certification. Preferred Qualifications: Other desired certifications include: MCSA, MDAA, CCNA, VMWare VCTA. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Flexible spending account Health insurance Health savings account Life insurance Paid time off Parental leave Referral program Retirement plan Tuition reimbursement Vision insurance Experience level: 5 years Schedule: 10 hour shift 12 hour shift Day shift Evening shift Night shift License/Certification: DOD 8140 Level 2 certification or CompTIA Security+ (Required. Security clearance: Top Secret (Required) Work Location: In person

Job Description Job Summary: Under supervision, performs a variety of entry-senior level field/office technical engineering tasks on projects involving transportation, infrastructure, utilities, aviation, municipal, public works, telecom, construction services, environment, and other business lines. Tasks may include assisting engineers or higher-level technicians in basic-level surveying activities, observations, data gathering, analysis, administrative activities, and/or office and field work for assigned projects. Generates accurate and concise deliverables regarding assigned aspects of the project. Ensures that responsibilities are delivered and adhered to with a level of quality that meets or exceeds acceptable industry standards for design, accuracy, safety, and functionality. Job Duties and Responsibilities: • Under supervision, assist with collecting, compiling, measuring, and analyzing numerical and graphical data from the physical work site, surveys, blueprints, GIS data, geotechnical data, maps, subsurface utility information, structural concepts, schematics, technical drawings, and other matrices to support engineering activities., • Assist with performing basic to moderately complex professional engineering tech work relating to conducting observations and evaluation of proposed and existing field/site conditions to determine conformance with applicable rules, standards, construction plans, or operating permits., • Performs routine engineering tech functions and provides assistance on various design requirements and engineering activities to account for quality control and the safety and functionality of end-users, systems, and infrastructure., • Assist with verifying the characteristics of a site and providing basic technical assistance on various environmental, design, materials, contractor, and construction observations and issues., • Assist with verifying calculations, design, change orders, compliance with contract plans and specifications, and escalating any work site issues or technical problems for appropriate resolution., • Work with cross-functional teams in executing project work., • Generate complete, accurate, and concise documentation and records using electronic systems, drawings, computations, software, and daily field/work site notebook/logs., • Comply with safety guidelines and site-specific procedures which include but are not limited to, location data, statistical documentation, engineering studies and surveys, and construction., • Complete training on assigned tasks., • Exercise responsible and ethical decision-making regarding company funds, resources and adhere to professional conduct and KLJ’s policies and procedures., • Perform additional responsibilities as required by business needs. Qualifications: • High School Diploma., • General to high awareness of engineering technician support principles, practices, process, methods and techniques., • General to high awareness of relevant codes, regulations, compliance practices, and record-keeping requirements., • Effective interpersonal and communication skills when interacting with others, expressing ideas effectively and professionally to a technical and non-technical audience., • Effective self-leadership with attention to detail, ability to learn new techniques, perform multiple tasks simultaneously, follow instruction, and comply with company policies., • Ability to work independently under supervision, as well as part of a team to meet business objectives., • Basic proficiency with technical writing, office automation, software, technology, math principles, spreadsheets, and tools., • Ability to work schedules conducive to project-specific requirements that may extend beyond the typical work week., • Occasional travel may be required depending on project-specific requirements. Physical Requirements: • The physical demands described represent those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities., • The employee is regularly required to:, • Sit, stand, walk, stoop, kneel, crouch, and crawl., • Use hands to handle, or feel objects, tools, or controls; and reach with hands and arms., • Be able to walk on uneven terrain up to three miles per day., • Frequently lift and move up to 50 pounds and occasionally lift and move up to 75 pounds. This job description is not meant to be all-inclusive or restrictive and other duties may be assigned. It is a description of the job as presently defined and is subject at any time to revision. This document is intended to describe the general nature and level of work being performed by individuals assigned to this classification. This is not to be construed as an exhaustive list of all responsibilities, duties, and skills required. Individuals may be required to perform duties outside of their normal responsibilities, as needed. At KLJ, we have a vested interest in the personal, financial, and professional goals of our employees. Factors that may be used to determine actual salary include education (or applicable experience), training, job location, competencies relevant to the role, and internal equity. We offer a competitive full suite benefit package including health, dental, vision, and life insurance, performance bonus, 401k, employee stock ownership program and a flexible work environment that gives you options to support excelling both professionally and personally. The options available for the current year are described at . All applicants must be authorized to work in the US, without employer-sponsorship. KLJ does not offer employment based VISAS. KLJ will not be partnering with third-party recruiters on this position. Please review our third-party recruiting policy at . Position will be posted until filled.

Job Description *Factors that may be used to determine your actual salary include your job specific skills, education, training, job location, number of years of experience related to this role and comparison to other employees already in this role. DSG is seeking an Accounts Receivable Associate in our Fargo, ND branch. In this full-time, hourly position, work is typically performed during standard business hours, 7:00am to 5:00pm CST, Monday through Friday, but may vary on occasion according to business needs. The Accounts Receivable Associate will perform a variety of accounts receivable duties, including the coordination of collection efforts, and will assist the Credit Manager with appropriate credit risk level for all customers. At DSG, we are dedicated to building futures one job at a time. Starting with yours. As an ESOP, we are a community of peers, first and foremost. And we focus on cultivating an environment of respect, teamwork and growth. Where your career path is rich with possibilities. Where every success is shared. And where every challenge is overcome together. For more than a century, we’ve delivered more than supplies, we’ve offered true partnership and valuable solutions. By continuing to empower the future of our vendors and customers, we will empower a future of ongoing success for all of us. A Typical Day in the Life of an Accounts Receivable Associate: • Manage the credit applications process, • Post customer payments by recording cash, check, and credit transactions, • Update customer accounts, • Post revenues by verifying and entering transactions from lock box and local deposits, • Update receivables by totaling unpaid invoices, • Protect organization's value by keeping information confidential, • Monitor customer accounts, • Validate tax exemption certificates and customer tax status, • Resolve disputes on customer accounts, • Update computer system with latest information on customer accounts, • Notify customers of NSF checks and collect payments, • Assist customers with solving credit problems, • Stay current on laws and regulations pertaining to collections, bankruptcy, bonds, liens and judgments, • Maintain appropriate documents, documentation and other information in the customer credit file, • Support the credit management team and their requests, • Previous data entry experience (required)., • Prior experience in Accounts Payable/Receivable and/or Accounting., • An associate degree or higher in Finance or Accounting (preferred)., • Experience with various accounting systems and software, such as Eclipse, BillTrust and Microsoft Office Suite, including proficiency in Excel., • Strong attention to detail and an ability to produce accurate work product while handling multiple tasks., • The skills necessary to communicate effectively with both internal and external customers., • We are proudly 100% employee owned, which means your hard work and decisions directly benefit not only the success of the organization, but also your individual Employee Stock Ownership Plan (ESOP)., • We are highly committed to your training and development, offering personal and professional development opportunities and unlimited growth potential., • We offer competitive compensation packages based on your experience and potential., • You will receive generous Paid Time Off (PTO) and Extended Medical Leave (EML) allowances., • Our comprehensive benefits package, including medical, dental, and vision, also offers a multitude of other perks such as life insurance, short- and long-term disability, and a Health Savings Account (HSA) with employer contribution, among many others., • We know the importance of family, and offer various family planning and childcare savings opportunities, including paid parental leave, adoption assistance, infertility assistance, and a Dependent Care Flexible Spending Account (FSA)., • Build your financial future through multiple retirement savings opportunities, including a 401(k) with employer match and ESOP., • You will receive a discount on all DSG-supplied products., • We believe in giving back to our communities and hope that you will too, which is why we offer paid volunteer hours in addition to PTO.