Offres tech support à Atlanta, GeorgiaCréer des alertes d'emploi

Company: Fusion Medical Staffing Location: Facility in Atlanta, Georgia Job Details Fusion Medical Staffing is seeking a skilled Rad Tech for a 13-week travel assignment in Atlanta, Georgia. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • One year's experience as Radiologic Technologist, • Current Radiologic Technologist/ Radiography license in compliance with state regulations, • Current ARRT Certification The Radiologic Technologist performs advanced imaging procedures using radiographic equipment to produce high-quality images that aid physicians in diagnosing and treating medical conditions. They ensure patient safety, maintain equipment functionality, and collaborate with healthcare teams to deliver accurate and effective diagnostic results. Essential Work Functions: • Educate patients about imaging procedures and answer questions if they arise, • Prepare and operate advanced radiologic equipment to capture high-quality diagnostic images according to physician orders, • Maintain equipment and sterilize the room in which procedure takes place, • Evaluate images for quality, present images and preliminary findings to physicians and health care team, • Maintain and inspect imaging equipment for proper functionality, troubleshooting issues and reporting malfunctions as needed, • Document all imaging procedures and technical details accurately in patient records, • Follow hospital safety rules and procedures including infection control and radiation safety protocols, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you — that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. Start your rewarding career as a Travel Rad Tech with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer #pb8

Job Summary: The Mammography Procedural Tech II is responsible for ensuring the department remains in compliance with MQSA regulations (QA/QC). The Mammography Procedural Techn II provides daily oversight of department, training/orientation, and general leadership. The Mammography Procedural Tech II will perform a variety of screening, diagnostic, and biopsy procedures in a safe and efficient manner; review and transmit images and reports to appropriate physicians. Essential Responsibilities: • Patient Care: Performs a variety of mammography procedures. Documents patient assessment and history. Provides patient education. Applies the professions code of ethics in all aspects of practice and is competent in all relative skills for a Mammographer. Complies with all governing regulations. Escalates all unusual (not typical) situations to the supervisor in a timely manner. Troubleshoots and manages equipment concerns to include engaging service vendor. Stocks and cleans exam rooms/work areas. Other duties as assigned., • QA/QC: Works closely with supervisor to govern department QA/QC review (MSDS, Equipment cleanliness, Viewing/Reading Station cleanliness, Daily room cleaning checklist, Eyewash checklist, Drug box inventory, Emergency box checklist, Electrical Safety, Physicist surveys)., • Department Oversight: Partners with supervisor to manage clinical, quality, and professional department operations. Prepares department for daily workload by determining staff assignments & coordinating lunch schedules. Monitors appropriate usage and ordering of medical and office supplies. Manages member concerns on an ongoing basis and in the supervisors absence. Site Coordinator for student technologist. Monitors learning experience daily, fills out evaluations weekly, and completes competency forms as needed. Assists with the design and implementation of Diagnostic Imaging processes/procedures/policies. Assists supervisor with interviews, staffing, staff meetings, and special projects., • Preceptor of all new technologists, providing training on equipment and patient care services., • Perform at least 1 training in-service annually., • Prebiopsy Set Up: prepares equipment, supplies and patient for biopsy procedure., • PostOp: Assists in transport of patient to recovery, cleans exam room, restocks supplies. Basic Qualifications: Experience, • Minimum three (3) years as a mammographer. Education, • High School Diploma or General Education Development (GED) required. License, Certification, Registration, • Basic Life Support required at hire from American Heart Association, • American Registry of Radiologic Technologists Certificate - Mammography Technologist, • Radiologic Technologist Certification from American Registry of Radiologic Technologists Additional Requirements:, • Demonstrated collaborative/team oriented work style., • Demonstrated strong clinical knowledge base and judgment, preferably in ambulatory care setting., • Ability to analyze, integrate, and use quantitative data/information in making business decisions and problem solving., • Understanding of the Kaiser Permanentes core values and service model., • Demonstration of good judgment, organizational skills and professionalism., • Knowledge of EH&S, OSHA, MQSA, ACR, Radiation Safety and Protection., • General knowledge of policies and procedures for the delivery of healthcare services., • Computer Skills; Microsoft Office., • Registration in multiple disciplines., • Customer service aptitude demonstrated through Customer Service Assessment., • Complete a Customer Service Assessment., • Graduate of accredited diagnostic imaging program. Preferred Qualifications:, • Bachelors Degree or four (4) years of experience in a directly related field.

Job Summary: The Mammography Technologist will perform a variety of screening, diagnostic in a safe and efficient manner; review and transmit images and reports to appropriate physicians. Essential Responsibilities: • Patient Care: Performs a variety of mammography procedures. Documents patient assessment and history. Provides patient education. Applies the professions code of ethics in all aspects of practice and is competent in all relative skills for a Mammographer. Complies with all governing regulations. Escalates all unusual (not typical) situations to the supervisor in a timely manner. Troubleshoots and manages equipment concerns to include engaging service vendor. Stocks and cleans exam rooms/work areas. Other duties as assigned. Basic Qualifications: Experience, • Minimum one (1) year as a Mammographer. Education, • High School Diploma or General Education Development (GED) required. License, Certification, Registration, • American Registry of Radiologic Technologists Certificate - Mammography Technologist, • Radiologic Technologist Certification, • Basic Life Support required at hire Additional Requirements:, • Demonstrated collaborative/team oriented work style., • Demonstrated strong clinical knowledge base and judgment, preferably in ambulatory care setting., • Ability to analyze, integrate, and use quantitative data/information in making business decisions and problem solving., • Understanding of the Kaiser Permanentes core values and service model., • Demonstration of good judgment, organizational skills and professionalism., • General knowledge of EH&S, OSHA, MQSA, ACR, Radiation Safety and Protection., • General knowledge of policies and procedures for the delivery of healthcare services., • Computer Skills; Microsoft Office., • Registration in multiple disciplines., • Complete a Customer Service Assessment., • Customer service aptitude demonstrated through Customer Service Assessment., • Ability to complete patient documentation (written/electronic) to effectively communicate with the interpreting physician., • Ability to work effectively within the role independently and with other team members., • Understands and uses correct exposure factors, compression and angulation to produce quality images., • ARRT Pocket card, • Documentation of 40 hours of mammography if training done after 4/28/1999 or if mammography training was done before 4/28/1999, (2) signed and filled out Attestation forms for mammography, • Proof of 200 Mammograms done in last 2 years, needs to be on the facilities letterhead with signature of certifying official, • Proof of 15 mammography specific, (Category A) continuing education units completed within the last 36 months, • New Section I ACR form (2-sided copy that needs to be completed) Please note that a separate request will be made for this form when needed. Preferred Qualifications:, • Two (2) years as a Radiologic tech.

Company: Fusion Medical Staffing Location: Facility in Brookhaven, Georgia Job Details Fusion Medical Staffing is seeking a skilled MRI Tech for a 13-week travel assignment in Brookhaven, Georgia. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • Successful completion of a Radiology program of study with specialization and training in MRI, • One years’ experience as an MRI Tech, • Valid Radiology/MRI license in compliance with state regulations, • Current ARRT or equivalent certification, • Current ARMRIT or equivalent certification The MRI Technologist operates magnetic resonance imaging (MRI) scanners to produce high-quality 3D images used in medical diagnosis. They interact directly with patients and administer intravenous injections of contrast dye as needed and collaborate with healthcare teams to provide accurate diagnostic results. MRI Technologists are responsible for maintaining equipment, adhering to safety protocols, and ensuring patient-centered care throughout the imaging process. Essential Work Functions: • Screen patients for MRI safety and contraindications prior to procedure, ensuring compliance with safety protocols, • Educate patients on MRI procedure and answers questions if they arise, • Maintain, inspect, and troubleshoot MRI equipment to ensure proper functionality and report any malfunctions, • Start I.V.s and administer contrast media per orders and protocol, monitoring patients for adverse reactions, • Monitor image quality during procedures and make adjustments to scanning parameters for optimal diagnostic results, • Document all procedure details, including imaging parameters and patient observations, in compliance with hospital policies, • Collaborate with radiologists and healthcare providers to ensure accurate diagnostic imaging and timely delivery of results, • Maintain a clean, organized workspace in compliance with infection control and hospital policies, • Follow hospital safety rules and procedures including infection control and radiation safety protocols, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you — that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. Start your rewarding career as a Travel MRI Tech with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer #pb8

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Atlanta, GA For More Info Call Jason or Text "Atlanta" to 830-383-4767 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay:$36.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder to manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 3 weeks ago (11/11/2025 9:55 AM) Requisition ID 2025-191340 Location (Posting Location) : State/Province GA Location (Posting Location) : City Atlanta Location (Posting Location) : Postal Code 30312 Category Technicians/Service Employees9 Additional Locations (use this field to indicate if position can be domiciled in several areas) US-GA-DECATUR | US-GA-COLLEGE PARK | US-GA-DORAVILLE | US-GA-MARIETTA Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $36.00/Hr. Max Pay USD $36.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Atlanta, GA For More Info Call Jason or Text "Atlanta" to 830-383-4767 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $36.00 Per Hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder to manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 2 weeks ago (11/13/2025 4:20 PM) Requisition ID 2025-191430 Location (Posting Location) : State/Province GA Location (Posting Location) : City Atlanta Location (Posting Location) : Postal Code 30312 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $36.00/Hr. Max Pay USD $36.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Atlanta, GA For More Info Call Jason or Text "Atlanta" to 830-383-4767 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $36.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder to manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 1 month ago (10/16/2025 7:35 AM) Requisition ID 2025-189891 Location (Posting Location) : State/Province GA Location (Posting Location) : City Atlanta Location (Posting Location) : Postal Code 30312 Category Technicians/Service Employees9 Additional Locations (use this field to indicate if position can be domiciled in several areas) US-GA-DECATUR | US-GA-COLLEGE PARK | US-GA-DORAVILLE | US-GA-MARIETTA Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $36.00/Hr. Max Pay USD $36.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Automotive Technician to support our Truck Fleet in Atlanta, GA Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $34.00 per hour based on experience, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Professional diploma preferred, • Two (2) years ormore in combination of classroom training and work experience, • NonCommercial Driver License CLASS E, • Valid Commercial Driver License (CDL) CLASS A preferred, • State driver's license as required, • Ability to:, • Understand and adhere to Company policies in all areas, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Capable of multi-tasking, highly organized, with excellent time management skills, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • Battery Charge and Check, Warranty, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • OEM on-line engine courses (minimum 2), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Perform diagnosis, repairs, inspections and preventative maintenance for non-contractual customers. May assist higher-grade maintenance specialists and assist them in completing complex repairs., • Perform routine vehicle maintenance including, but not limited to, tune-ups, oil changes, tire changes, fuel filter changes, fluid checks, alignments, basic suspension replacement and light and mirror replacements, • Assist or receive guidance from a higher-grade maintenance specialist to diagnose, repair or replace engines parts including but not limited to alternators, starts, radiators, and injectors, transmissions and other fuel components., • Perform basic diagnostics., • Hydraulic brake inspections, repairs, and replacements, • May operate out of mobile maintenance vehicle and travel to customer yards within assigned region, • Possess general knowledge and understanding of the Torque products and services, • Represent Torque/Ryder to establish a relationship with the customer, • Ensure proper documentation of work orders, customer repair authorizations, and repair notes within Salesforce, • Perform environmental duties such as site inspections, site clean-ups/disposals, vehicle chemicals with some guidance and direction, • Work in accordance with all federal/regional and corporate compliance guidelines Posted Date 3 weeks ago (11/13/2025 4:23 PM) Requisition ID 2025-191456 Location (Posting Location) : State/Province GA Location (Posting Location) : City Atlanta Location (Posting Location) : Postal Code 30341 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001659 Min Pay USD $34.00/Hr. Max Pay USD $34.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Lead Mobile Diesel Technician to support our Truck Fleet in Atlanta, GA Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification preferred in related field, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Demonstrate ability to lead a team required, • Four (4) years or more relevant work experience preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair, • Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support, • Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable, • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements. Posted Date 12 hours ago (12/4/2025 8:18 AM) Requisition ID 2025-192168 Location (Posting Location) : State/Province GA Location (Posting Location) : City Atlanta Location (Posting Location) : Postal Code 30312 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001372

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Atlanta, GA Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 11 hours ago (12/4/2025 8:45 AM) Requisition ID 2025-192175 Location (Posting Location) : State/Province GA Location (Posting Location) : City Atlanta Location (Posting Location) : Postal Code 30312 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Entry Level Mobile Diesel Technician to support our Truck Fleet in Atlanta, GA For More Info Call " to xxx-xxx-xxxx Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided For More Info Call " to xxx-xxx-xxxx At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Basic tools, required, • One (1) year or more experience in transportation maintenance, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • State driver's license, as required, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Pass a Ryder drug test and previous employer's for the past 3 years, DOT physical, Ryder road test, pass a Ryder background check and motor vehicle check including Drug and Alcohol verification from previous employers for the last 3 years, • Vocational or Technical Certification, • One (1) year or more of federal PM certification requirements through any combination of classroom training or work experience, • One (1) year or more mechanical experience working offsite at customer locations, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Pass a Ryder drug test and previous employer's for the past 3 years, DOT physical, Ryder road test, pass a Ryder background check and motor vehicle check including Drug and Alcohol verification from previous employers for the last 3 years, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles.Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • Battery Charge and Check, Warranty, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • OEM on-line engine courses (minimum 2), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with non-contractual Ryder customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss any repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform basic system checks such as power to compressor, visual inspection of condenser, belt tension, etc.; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc... for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc., • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. - Perform work in accordance with all federal/ provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned, • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements Posted Date 11 hours ago (12/4/2025 8:45 AM) Requisition ID 2025-192176 Location (Posting Location) : State/Province GA Location (Posting Location) : City Atlanta Location (Posting Location) : Postal Code 30312 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001373

We recruit and support registered nurses, licensed practical nurses, surgical technicians, respiratory therapists, imaging technologists, laboratory specialists, and other experienced nursing and allied healthcare professionals. TRS Healthcare is seeking an experienced Surgical Tech for an exciting

We recruit and support registered nurses, licensed practical nurses, surgical technicians, respiratory therapists, imaging technologists, laboratory specialists, and other experienced nursing and allied healthcare professionals. TRS Healthcare is seeking an experienced Surgical Tech - First Assist f

ALOIS Healthcare is seeking a travel Mammography Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: Mammography Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days ALOIS Healthcare Job ID #17289690. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Mammography Tech Acute About ALOIS Healthcare Why ALOIS Healthcare? ALOIS means “brave warrior” and that’s what you are- Warrior in Scrubs! Just as you advocate for your patients, we will advocate for you. The pay you deserve. The support you need. We’re in your corner for every battle – because you shouldn’t settle for anything less when it comes to your career. We offer: · Industry-leading pay · Weekly health insurance or health insurance Marketplace weekly bonus · Continuing education credits We’re proud to be recognized globally as a certified minority-owned staffing supplier. At ALOIS Healthcare: · Everyone Matters · We are Performance Driven · We are Open, Honest and Direct · We are Transparent · We are Inclusive · We Do the Right Thing We care about you - and your success is our success.

ALOIS Healthcare is seeking a travel MRI Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: MRI Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 12 weeks, • 40 hours per week, • Shift: 8 hours, days ALOIS Healthcare Job ID #17334190. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: MRI Tech Acute About ALOIS Healthcare Why ALOIS Healthcare? ALOIS means “brave warrior” and that’s what you are- Warrior in Scrubs! Just as you advocate for your patients, we will advocate for you. The pay you deserve. The support you need. We’re in your corner for every battle – because you shouldn’t settle for anything less when it comes to your career. We offer: · Industry-leading pay · Weekly health insurance or health insurance Marketplace weekly bonus · Continuing education credits We’re proud to be recognized globally as a certified minority-owned staffing supplier. At ALOIS Healthcare: · Everyone Matters · We are Performance Driven · We are Open, Honest and Direct · We are Transparent · We are Inclusive · We Do the Right Thing We care about you - and your success is our success.

American Traveler is seeking a travel Interventional Radiology Technologist for a travel job in Decatur, Georgia. Job Description & Requirements • Specialty: Interventional Radiology Technologist, • Discipline: Allied Health Professional, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days, • Work in an interventional radiology lab setting, • Day shifts are 10 hours in length, • 13-week contract assignment, • No on-call requirement for this position, • Collaborate with the IR team to provide quality patient care, • Responsibilities include supporting interventional procedures as needed\n \n Requirements\n, • Rad Tech license required if applicable, • Previous experience in interventional radiology preferred\n Benefits\n, • High Pay and Bonuses, • Medical, Dental and Vision Insurance with Day 1 Options, • 401(k) Plan, • Weekly Payroll Deposit, • Free Online CEUs, • Generous Housing Allowance, • Travel and Licensure Reimbursements, • Non-taxed Per Diem and Subsidy With thousands of travel nursing and allied jobs nationwide, our attentive and approachable recruiters find positions that align perfectly with your career aspirations and personal requirements. American Traveler offers exceptional benefits, including premium medical, dental, vision and life insurance beginning day one of your assignment, generous 401(k) match, substantial housing stipends, and more. Additionally, with 24/7 support and access to our in-house clinicians, you are assured confidence and comfort throughout your assignment. With our team behind you, you can relax and enjoy a rewarding travel career.

Olaro is seeking a travel CT Technologist for a travel job in Decatur, Georgia. Job Description & Requirements • Specialty: CT Technologist, • Discipline: Allied Health Professional, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days Olaro is a trusted partner in healthcare staffing, connecting nurses and allied health professionals with opportunities nationwide. For over 35 years, we’ve helped clinicians expand their horizons by matching them with assignments that fit their lifestyle, career goals, and personal ambitions. At Olaro, we value your expertise and support your growth at every step. We offer competitive pay, comprehensive benefits, and access to diverse clinical experiences that build your skills and open doors to new possibilities. With 24/7 support, streamlined onboarding, and a team committed to your success, you’ll always have a proven guide by your side. Whether you want to explore new locations, broaden your clinical experience, or achieve better work–life balance, Olaro provides the flexibility and support to help you thrive. Join us, and let’s shape the future of healthcare together.

MedSource LLC is seeking a travel MRI Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: MRI Technologist, • Discipline: Allied Health Professional, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, evenings MedSource LLC Job ID #4036. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About MedSource LLC MedSource is Rapid Response healthcare staffing agency offering our healthcare providers, the highest pay in the industry. As one of the leading medical staffing agencies, MedSource is dedicated to connecting healthcare professionals with fulfilling job opportunities across the nation. We proudly partner with thousands of healthcare facilities nationwide, therefore, our extensive network ensures that you can find the perfect placement, whether you prefer a bustling urban hospital or a serene rural clinic. At MedSource, we offer one of the most comprehensive salary and benefits packages in the industry. Our commitment to our staff includes: • Competitive Salaries, • Comprehensive Health Benefits, • Continuing Education Opportunities We understand the importance of support and availability, which is why we provide 24/7 assistance to all our staff. You can rest easy knowing that we are Joint Commission Certified, a testament to our commitment to quality and safety. Join MedSource and focus on what you do best—providing exceptional patient care. Let us handle the details, so you can enjoy the adventure of your new assignment. Apply today and take the next step in your healthcare career with MedSource! Benefits • Referral bonus, • Medical benefits, • Dental benefits, • Vision benefits, • Life insurance

LeaderStat is seeking a travel CT Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: CT Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours LeaderStat is currently seeking a CT Technologist for a(n) 13 week contract in GA. Start Date: 12/15/2025 End Date: 3/14/2026 Shift: Weekends (36 hour) • 1 year of experience working as a full-time Radiation Technologist, • Clinical experience within the last 2 years, • Current State Licensure Our goal is to find the best travel healthcare assignments to fit your individual needs. While you focus on providing top-notch care to your patients, we’ll handle the rest. LeaderStat Perks & Benefits As a traveling healthcare professional with LeaderStat you receive excellent benefits: • Weekly Pay & Direct Deposit, • W2 Employee Status, • 401(k) Retirement Plan, • Medical, Dental and Vision Insurance, • Referral Bonuses For 20 years, LeaderStat has been dedicated to partnering with exceptional healthcare providers to find them the very best assignments throughout the country. Specializing in Travel Nursing, Interim Leadership, Executive Search, and Consulting. When you work with the LeaderStat team, you work with a recruiter who is dedicated to finding you the perfect assignment. Why would you settle for less? Benefits • Referral bonus, • License and certification reimbursement, • Medical benefits, • Holiday Pay, • Weekly pay, • 401k retirement plan

Genie Healthcare is seeking a travel MRI Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: MRI Technologist, • Discipline: Allied Health Professional, • Start Date: 01/05/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days, • Employment Type: Travel Genie Healthcare is looking for a Radiology/Imaging to work in MRI Tech for a 13 weeks travel assignment located in Atlanta, GA for the Shift (3x12hr days, 07:00:00-19:00:00, 12.00-3). Pay and benefits packages are estimated based on client bill rate at time the job was posted. These rates are subject to change. Exact pay and benefits vary based on several things, including, but not limited to, guaranteed hours, client changes in bill rate, experience, etc. Benefits: Medical Insurance, Dental Insurance, Vision Insurance, 401(k) with company matching (50% up to 6% of what you contribute) Genie Healthcare Job ID #17501669. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Radiology/Imaging:MRI Tech,07:00:00-19:00:00 About Genie Healthcare Genie Healthcare is one of the fastest growing Nurse Travel Agencies in the USA. Genie serves hundreds of facilities and has over 4000 current travel RN contracts open at any given time. \n\n Genie provides travel RN’s flexibility, support, top pay scale, housing and the #1 rated, multi-state health insurance coverage. \n\n Genie Healthcare carries with it a commitment to providing a comprehensive level of service and quality care. Growing from a small team of eager recruiters to a company with satisfied clients in nearly every corner of the nation, delivering excellence in patient and customer care is the key to Genie’s success. \n\n The management team has 20 years of experience in workforce solutions and staffing in medical and non-medical fields, roles ranging from Clerical job to Cardiologist to software developer to CEO.

Triage Staffing is seeking a travel Ultrasound Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: Ultrasound Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, nights Apply for specific facility details.Ultrasound Tech Triage Staffing Job ID #6X9AY66D. Posted job title: Radiology: General Ultrasound About Triage Staffing At Triage, we prefer to be real. Real about expectations—both ours and yours. Real about how a decision you make today could affect your tomorrows. Real about how compensation actually works. Real about how great—or grating—your next supervisor may be. Being real allows everyone at Triage to be ready. Ready to serve you with real honesty. So if that gig near the ocean is really no day at the beach, or that third shift comes with a second-class rate, we tell you. So you can be ready, too. We staff all five major divisions of acute care—nursing, lab, radiology, cardiopulmonary and rehab therapy, offering: • Competitive, custom pay packages, • One point of contact for both travelers and facilities (per division), • A reliable recruiter who's got your back throughout your entire assignment, • In-house compliance and accounting specialists, • A clinical liaison team available 24/7 to offer medical and professional support and career development, • A mentoring program that is run and managed by actual clinicians—yeah, you read that right, • And more (because of course there’s more) Are we the biggest? No. Are we the best? That’s rather subjective, but we’re trying to be. Will we work like hell to get you as close to your idea of heaven as possible? Yes. Yes, we will. Benefits: • Day One comprehensive, nationwide insurance plans for health, vision and dental and life—including a HSA option, • Day One 401(k) program with employer-matching contributions once eligible, • Facility cancelling protection—your time is money on and off-the-clock, • Guaranteed hours, • Weekly paychecks via direct deposit, • Earned vacation bonuses for time worked, • Paid holidays, • Employee assistance program (EAP)—your mental health is important, too, • Continuing education, certification and licensing reimbursement, • Workers comp—because accidents happen, • Top-rated professional liability insurance, • Company provided housing options, • Referral bonus—$750 in your pocket after they’ve completed a 13-week assignment

Triage Staffing is seeking a travel Cath Lab Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: Cath Lab Technologist, • Discipline: Allied Health Professional, • Start Date: 01/05/2026, • Duration: 12 weeks, • 40 hours per week, • Shift: 10 hours, days Apply for specific facility details.Cath Lab Tech Triage Staffing Job ID #6GYFKQCY. Posted job title: Radiology: Cath Lab Tech About Triage Staffing At Triage, we prefer to be real. Real about expectations—both ours and yours. Real about how a decision you make today could affect your tomorrows. Real about how compensation actually works. Real about how great—or grating—your next supervisor may be. Being real allows everyone at Triage to be ready. Ready to serve you with real honesty. So if that gig near the ocean is really no day at the beach, or that third shift comes with a second-class rate, we tell you. So you can be ready, too. We staff all five major divisions of acute care—nursing, lab, radiology, cardiopulmonary and rehab therapy, offering: • Competitive, custom pay packages, • One point of contact for both travelers and facilities (per division), • A reliable recruiter who's got your back throughout your entire assignment, • In-house compliance and accounting specialists, • A clinical liaison team available 24/7 to offer medical and professional support and career development, • A mentoring program that is run and managed by actual clinicians—yeah, you read that right, • And more (because of course there’s more) Are we the biggest? No. Are we the best? That’s rather subjective, but we’re trying to be. Will we work like hell to get you as close to your idea of heaven as possible? Yes. Yes, we will. Benefits: • Day One comprehensive, nationwide insurance plans for health, vision and dental and life—including a HSA option, • Day One 401(k) program with employer-matching contributions once eligible, • Facility cancelling protection—your time is money on and off-the-clock, • Guaranteed hours, • Weekly paychecks via direct deposit, • Earned vacation bonuses for time worked, • Paid holidays, • Employee assistance program (EAP)—your mental health is important, too, • Continuing education, certification and licensing reimbursement, • Workers comp—because accidents happen, • Top-rated professional liability insurance, • Company provided housing options, • Referral bonus—$750 in your pocket after they’ve completed a 13-week assignment

Uniti Med is seeking a travel Electrophysiology Technician for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: Electrophysiology Technician, • Discipline: Allied Health Professional, • Start Date: 01/05/2026, • Duration: 14 weeks, • 36 hours per week, • Shift: 12 hours, days, • Employment Type: Travel Benefits: • Day 1 Insurance, • Cigna medical, MetLife dental and vision insurance, • License reimbursement for new licenses needed for each assignment, • Discounts with hotels and rental cars, • A dedicated recruiter and support team that will help you every step of the way to sure you start on time and have an exceptional experience Finding the right role is about more than just matching skills to a job—it’s about aligning with your goals, values, and the way you want to work. As an award-winning talent partner, we support healthcare professionals through every step of that process, offering meaningful opportunities, clear guidance, and long-term partnership. From our first conversation to your first day on the job (and beyond!), we’re here to help you move forward with confidence. UnitiMed Job ID #756685. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Electrophysiology Tech About Uniti Med Uniti Med meticulously matches your talents to our open needs to ensure the ultimate travel experience. Tell us where you want to go and let our experienced staff lead the way! Benefits • Referral bonus, • Benefits start day 1, • Employee assistance programs

Host Healthcare is seeking a travel Radiology Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: Radiology Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, evenings We are on a mission to help others live better and we do this by helping the healers of the world be as comfortable as possible. With access to tens of thousands of travel nursing, therapy, and allied jobs in all 50 states, our responsive and friendly recruiters find your dream position based on what’s important to you. During your assignment, get access to premium benefits, including Day 1 medical that continues up to 30 days between assignments, 401K matching, travel reimbursements, dedicated housing support, and more. We also offer 24/7 support from our team and access to our on-staff clinicians so you can feel comfortable and confident throughout your entire assignment. Travel comfortably with Host Healthcare. Benefits • Referral bonus, • School loan reimbursement, • Vision benefits, • Wellness and fitness programs, • Company provided housing options, • License and certification reimbursement, • Life insurance, • Medical benefits, • Mileage reimbursement, • Pet insurance, • Discount program, • Employee assistance programs, • Guaranteed Hours, • Health savings account, • Holiday Pay, • 401k retirement plan, • Continuing Education, • Dental benefits

Seven Healthcare is seeking a travel Surgical Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: Surgical Technologist, • Discipline: Allied Health Professional, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, nights Seven Healthcare is seeking a Travel Surgical Technologist for an assignment in Atlanta, GA. This Surgical Tech travel position offers four 10-hour night shifts per week (40 hours) with a weekly pay rate of $1,800. Why Choose Seven Healthcare for Your Travel Assignment? Our Surgical Tech travelers receive excellent support and benefits, including: • License & Credentialing Support – Assistance with meeting Georgia state requirements., • Referral Program – Bonuses for referring other healthcare professionals., • Health Insurance – Comprehensive coverage for travelers and their families., • Certification Reimbursement – Support for maintaining required certifications., • Weekly Pay – Reliable, on-time payments every week. Key Responsibilities of the Travel Surgical Technologist • Prepare operating rooms, instruments, and equipment for surgical procedures., • Assist surgeons and the surgical team during operations., • Maintain sterile technique and ensure a safe, clean surgical environment., • Monitor patient condition and report changes to the surgical team., • Collaborate with nurses, physicians, and other team members to optimize patient care., • Maintain accurate documentation of procedures and patient records., • Follow safety protocols and infection control standards. Requirements for the Travel Surgical Technologist Role • Active CST certification or equivalent., • Minimum of 2+ years of recent Surgical Technologist experience., • Strong technical, critical-thinking, and patient-care skills., • Excellent communication and teamwork abilities. Why Work in Atlanta, GA? • Healthcare Access – Opportunities at major hospitals and surgical centers., • Community & Lifestyle – Vibrant city with diverse neighborhoods and family-friendly areas., • Dining & Entertainment – Thriving restaurant scene, shopping, and cultural attractions., • Outdoor Activities – Parks, trails, and recreational areas for year-round enjoyment., • Mild Climate – Seasonal variety with generally moderate weather. Why Work with Seven Healthcare? Seven Healthcare is a trusted travel staffing agency across the U.S., supporting travel Surgical Technologists. Recognized as a Best Travel Healthcare Company 2024 by BluePipes and rated 5 stars on Google and Vivian, we provide competitive pay, exclusive assignments, and dedicated support throughout your travel healthcare journey. Seven Healthcare Job ID #312. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Seven Healthcare Seven Healthcare is proud to be Joint Commission–certified, demonstrating our commitment to quality, safety, and excellence in healthcare staffing. If you are seeking an exciting new chapter in your healthcare career, our multi-award-winning team is here to help. With more than ten years of experience placing exceptional staff with employers across the USA, we have also built a strong track record of helping healthcare professionals from Canada secure rewarding travel contracts in the United States. From Travel Nurses, LPNs, LVNs, and CNAs to Allied Health professionals such as CT Technologists, Radiologic Technologists, MRI Technologists, Physical Therapists, and many more, we can help you take the next step in your career. Benefits • Weekly pay, • Holiday Pay, • Referral bonus, • License and certification reimbursement

Triage Staffing is seeking a travel CVOR Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: CVOR Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, nights Apply for specific facility details.CVOR Tech Triage Staffing Job ID #Y9GRNVAQ. Posted job title: Nursing: Cardiovascular OR Tech About Triage Staffing At Triage, we prefer to be real. Real about expectations—both ours and yours. Real about how a decision you make today could affect your tomorrows. Real about how compensation actually works. Real about how great—or grating—your next supervisor may be. Being real allows everyone at Triage to be ready. Ready to serve you with real honesty. So if that gig near the ocean is really no day at the beach, or that third shift comes with a second-class rate, we tell you. So you can be ready, too. We staff all five major divisions of acute care—nursing, lab, radiology, cardiopulmonary and rehab therapy, offering: • Competitive, custom pay packages, • One point of contact for both travelers and facilities (per division), • A reliable recruiter who's got your back throughout your entire assignment, • In-house compliance and accounting specialists, • A clinical liaison team available 24/7 to offer medical and professional support and career development, • A mentoring program that is run and managed by actual clinicians—yeah, you read that right, • And more (because of course there’s more) Are we the biggest? No. Are we the best? That’s rather subjective, but we’re trying to be. Will we work like hell to get you as close to your idea of heaven as possible? Yes. Yes, we will. Benefits: • Day One comprehensive, nationwide insurance plans for health, vision and dental and life—including a HSA option, • Day One 401(k) program with employer-matching contributions once eligible, • Facility cancelling protection—your time is money on and off-the-clock, • Guaranteed hours, • Weekly paychecks via direct deposit, • Earned vacation bonuses for time worked, • Paid holidays, • Employee assistance program (EAP)—your mental health is important, too, • Continuing education, certification and licensing reimbursement, • Workers comp—because accidents happen, • Top-rated professional liability insurance, • Company provided housing options, • Referral bonus—$750 in your pocket after they’ve completed a 13-week assignment

Triage Staffing is seeking a travel Cath Lab Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: Cath Lab Technologist, • Discipline: Allied Health Professional, • Start Date: 01/05/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, nights Apply for specific facility details.Cath Lab Tech Triage Staffing Job ID #LLF6DM47. Posted job title: Radiology: Cath Lab Tech About Triage Staffing At Triage, we prefer to be real. Real about expectations—both ours and yours. Real about how a decision you make today could affect your tomorrows. Real about how compensation actually works. Real about how great—or grating—your next supervisor may be. Being real allows everyone at Triage to be ready. Ready to serve you with real honesty. So if that gig near the ocean is really no day at the beach, or that third shift comes with a second-class rate, we tell you. So you can be ready, too. We staff all five major divisions of acute care—nursing, lab, radiology, cardiopulmonary and rehab therapy, offering: • Competitive, custom pay packages, • One point of contact for both travelers and facilities (per division), • A reliable recruiter who's got your back throughout your entire assignment, • In-house compliance and accounting specialists, • A clinical liaison team available 24/7 to offer medical and professional support and career development, • A mentoring program that is run and managed by actual clinicians—yeah, you read that right, • And more (because of course there’s more) Are we the biggest? No. Are we the best? That’s rather subjective, but we’re trying to be. Will we work like hell to get you as close to your idea of heaven as possible? Yes. Yes, we will. Benefits: • Day One comprehensive, nationwide insurance plans for health, vision and dental and life—including a HSA option, • Day One 401(k) program with employer-matching contributions once eligible, • Facility cancelling protection—your time is money on and off-the-clock, • Guaranteed hours, • Weekly paychecks via direct deposit, • Earned vacation bonuses for time worked, • Paid holidays, • Employee assistance program (EAP)—your mental health is important, too, • Continuing education, certification and licensing reimbursement, • Workers comp—because accidents happen, • Top-rated professional liability insurance, • Company provided housing options, • Referral bonus—$750 in your pocket after they’ve completed a 13-week assignment

Healthcare Support is seeking a travel CT Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: CT Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours Not only does HealthCare Support reimburse for relocation and travel costs on your first check, but we also offer license and certification reimbursements required for your assignments so that you can focus on building your career. During your assignment, you’ll have access to medical benefits, 24/7 support from our Clinical Advocacy Team, and a travel team with stateside operations. Your travel team will include a designated credentialing expert to help you navigate every step of the on-boarding process, a payroll specialist who you can communicate with directly, and a skilled recruiter who takes the time to understand your needs and works hard to find the right position for you. Don’t get lost in the shuffle of another overblown staffing agency. Choose HealthCare Support to be your trusted partner that you can rely on for all your travel assignments. We can’t wait to hear about the amazing adventures you’ll have! Pst! Ask us about our Direct Hire Opportunities! Benefits • Vision benefits, • Guaranteed Hours, • License and certification reimbursement, • Medical benefits, • Dental benefits, • Mileage reimbursement, • Employee assistance programs, • Referral bonus, • 401k retirement plan, • Holiday Pay, • Weekly pay

Olaro is seeking a travel MRI Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: MRI Technologist, • Discipline: Allied Health Professional, • Start Date: 01/05/2026, • Duration: 13 weeks, • 24 hours per week, • Shift: 12 hours, days Olaro is a trusted partner in healthcare staffing, connecting nurses and allied health professionals with opportunities nationwide. For over 35 years, we’ve helped clinicians expand their horizons by matching them with assignments that fit their lifestyle, career goals, and personal ambitions. At Olaro, we value your expertise and support your growth at every step. We offer competitive pay, comprehensive benefits, and access to diverse clinical experiences that build your skills and open doors to new possibilities. With 24/7 support, streamlined onboarding, and a team committed to your success, you’ll always have a proven guide by your side. Whether you want to explore new locations, broaden your clinical experience, or achieve better work–life balance, Olaro provides the flexibility and support to help you thrive. Join us, and let’s shape the future of healthcare together.

Travel Nurses, Inc. is seeking a travel Electrophysiology Technician for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: Electrophysiology Technician, • Discipline: Allied Health Professional, • Start Date: 01/05/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours At the heart of our mission is a profound respect for nurses, whom we consider the cornerstone of healthcare. This acknowledgment extends beyond the nursing profession alone. Travel Nurses, Inc. now proudly embraces a wide array of healthcare professionals, recognizing their crucial roles in our collective mission. Travel Nurses, Inc. is dedicated to providing comprehensive support and opportunities that will help facilitate complete career mobility in the healthcare field. Our commitment to transparency ensures that all professionals, not just nurses, can confidently accept any assignment without financial uncertainties. We prioritize our professionals’ well-being with comprehensive benefits packages, including day-one healthcare coverage, competitive salaries, bonuses and incentives. This underscores our unwavering commitment to offering the best possible rewards and support for all the professionals we serve. Benefits • Weekly pay, • Continuing Education, • 401k retirement plan, • Wellness and fitness programs, • Mileage reimbursement, • Referral bonus, • Employee assistance programs, • Medical benefits, • Dental benefits, • Vision benefits, • Benefits start day 1, • License and certification reimbursement, • Life insurance, • Retention bonus

MedPro Healthcare Allied Staffing is seeking a travel Respiratory Therapist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: Respiratory Therapist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel MedPro Healthcare Staffing, a Joint Commission-certified staffing agency, is seeking a quality Respiratory Therapist for a contract with one of our top healthcare clients. Requirements • Respiratory Therapist credential by the NBRC, and CPR certification required., • Weekly pay and direct deposit, • Full coverage of all credentialing fees, • Private housing or housing allowance, • Group Health insurance for you and your family, • Company-paid life and disability insurance, • Travel reimbursement, • 401(k) matching, • Provide respiratory care to patients per physician orders and established policies and procedures., • Participate in the development and/or implementation of patient care plans., • Assure compliance with federal, state, and local technical and professional regulations and accepted practiced guidelines., • Maintain and promote good customer relations; communicate with management, coworkers, facility staff, patients, patients’ family members, and other caretakers in a professional manner., • Provide instruction to patients and other caretakers in the methods and objectives of therapy. MedPro Healthcare Staffing is a Joint Commission certified provider of contract staffing services. Since 1983, we have placed nursing and allied travelers in top healthcare facilities nationwide. Join us today for your very own MedPro Experience®. If qualified and interested, please call for immediate consideration. MedPro Staffing is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, national origin, age, sex, disability, marital status or veteran status. Key Words: Therapy, Respiratory, Therapist, Registered Respiratory Therapist, Certified Respiratory Therapist, RRT, CRTT, CRT, EEG Tech *Weekly payment estimates are intended for informational purposes only and include a gross estimate of hourly wages and reimbursements for meal, incidental, and housing expenses. Your recruiter will confirm your eligibility and provide additional details. MedPro Job ID #a0Fcx000009IJDVEA4. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Respiratory Therapist Respiratory. About MedPro Healthcare Allied Staffing At MedPro Healthcare Staffing, we believe no one cares more for caregivers than we do. Our mission is simple: you focus on your patients, and we’ll take care of the rest. As a Joint Commission-certified leader in temporary and contract healthcare staffing since 1983, MedPro has proudly connected nursing and allied travelers with top healthcare facilities across the nation. With thousands of job opportunities available nationwide, we make it easy to find assignments that align with your goals and lifestyle. Our on-staff clinical support team—alongside a compassionate group of experienced recruiters—provides hands-on guidance every step of the way. From Day 1 medical benefits and a 401(k) plan to personalized career support, we’re committed to ensuring every professional we serve feels valued, cared for, and empowered to succeed. Guided by a CEO who is a Registered Nurse, MedPro is built on a foundation of clinical insight and genuine compassion for the caregiving community. Through The MedPro Experience®, we deliver travel assignments that are rewarding, memorable, and designed to help you DREAM big, EXPLORE often, and ACHIEVE greatness. Benefits • Day 1 medical, dental, and vision benefits for you and your family, • Weekly pay and direct deposit, • Unlimited Referral Bonuses starting at $500, • On Staff Clinical Support Team, • Access to nationwide travel assignments, • MPX+ Mobile app -24/7 real-time access to jobs, credentials, assignment details, and more, • Full coverage of all credentialing fees, • Private housing or housing allowance, • Tax Free Per Diems, Housing Stipends and Travel Reimbursements, • Company-paid life and disability insurance, • Travel reimbursement, • 401(k) matchingBenefits, • Weekly pay, • Employee assistance programs, • Referral bonus

Solomon Page is seeking a travel Ultrasound Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: Ultrasound Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel Our client is seeking an Ultrasound Tech to join their growing team. As an Ultrasound Tech, you are responsible for using ultrasound equipment to help visualize internal anatomy. Duties include calibrating and manipulating ultrasound equipment to conduct appointments and taking images or videos. Ultrasound Technicians will have excellent communication skills to respond to patients with compassion and professionalism. \n\n Job Details: \n\n\n\t • Location: Atlanta, Georgia\n\t, • Duration: 13 Weeks\n\t, • Start Date: 01/12/2026\n\t, • Shift: 5x8 Days\n\t, • Certificate from an accredited program\n\t, • Excellent teamwork and collaboration skills\n\t, • Excellent interpersonal skills including patience, empathy, and compassion\n\t, • Effective communication skills, including active listening, writing, speaking and reading comprehension\n\t, • ReviveHealth Virtual Care: Available immediately. Receive free, 100% company paid, virtual care access. Upon commencement of your employment, Solomon Page offers automatic enrollment into ReviveHealth, which offers concierge, membership-based access to virtual primary care, urgent care, mental health therapy, a vision program, and prescription medications., • Medical Coverage: Available immediately. Whether you are looking to enroll in single or family insurance, you have immediate access to quality coverage., • Dental Coverage: Available the 1st of the month after your hire date. We offer dental insurance to you and your dependents., • Vision Coverage: Available the 1st of the month after your hire date. We offer vision insurance to you and your dependents., • Commuter Benefits: Available the 1st of the month after your hire date. Set aside pre-tax money to pay for public transportation., • 401K Plan: Associates can enroll in the 401K plan after they have worked 1000 hours., • ESOP Benefits: As an ESOP company, Solomon Page offers an employee stock ownership plan., • Referral Bonus: A cash bonus is offered for referring a candidate to Solomon Page who gets placed., • Training & Support: Training programs and ongoing career coaching and support is offered to consultants.Benefits, • Medical benefits, • Dental benefits, • Vision benefits, • 401k retirement plan, • Referral bonus

Solomon Page is seeking a travel Mammography Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: Mammography Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel Our client is looking to add a Mammography Tech to their team. As a Mammography Tech, you will work with the radiologist team to prepare equipment and produce clinical diagnostic images. The Mammography Tech will perform diagnostic and interventional breast procedures following established procedures. \n\n Job Details: • Location: Atlanta, Georgia, • Duration: 13 Weeks, • Start Date: 01/12/2026, • Shift: 5x8 Days, • Certification from an accredited program\n\t, • Excellent interpersonal skills including patience, empathy, and compassion\n\t, • Effective communication skills, including active listening, writing, speaking and reading comprehension\n\t, • Fast and adaptive problem-solving abilities\n\t Solomon Page Job ID #391268. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: mammo tech - radiology | atlanta, georgia About Solomon Page Founded in 1990, Solomon Page has grown to be a leader in the staffing industry. As a member of our healthcare provider community, you will join a nurturing culture that fosters your career goals. We have the network and resources to connect you with your next opportunity – whether it is in your hometown, or you are looking to travel to a new destination. Accredited by the Joint Commission with the Gold Seal of Approval, Solomon Page prides itself in developing long-term relationships with healthcare providers based on trust and respect. Headquartered in New York with offices throughout the United States our experienced healthcare and medical staffing experts are committed to providing safe and quality patient care through our wide network of travel nurses, locum tenens, and allied resources. For more information and additional healthcare opportunities, visit: solomonpage.com/healthcare and connect with us on Facebook, Twitter, Instagram, Tik Tok, and LinkedIn. • ReviveHealth Virtual Care: Available immediately. Receive free, 100% company paid, virtual care access. Upon commencement of your employment, Solomon Page offers automatic enrollment into ReviveHealth, which offers concierge, membership-based access to virtual primary care, urgent care, mental health therapy, a vision program, and prescription medications., • Medical Coverage: Available immediately. Whether you are looking to enroll in single or family insurance, you have immediate access to quality coverage., • Dental Coverage: Available the 1st of the month after your hire date. We offer dental insurance to you and your dependents., • Vision Coverage: Available the 1st of the month after your hire date. We offer vision insurance to you and your dependents., • Commuter Benefits: Available the 1st of the month after your hire date. Set aside pre-tax money to pay for public transportation., • 401K Plan: Associates can enroll in the 401K plan after they have worked 1000 hours., • ESOP Benefits: As an ESOP company, Solomon Page offers an employee stock ownership plan., • Referral Bonus: A cash bonus is offered for referring a candidate to Solomon Page who gets placed., • Training & Support: Training programs and ongoing career coaching and support is offered to consultants.Benefits, • Medical benefits, • Dental benefits, • Vision benefits, • 401k retirement plan, • Referral bonus

TRS Healthcare is seeking a travel Interventional Radiology Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: Interventional Radiology Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days An RN-founded, woman-owned company, TRS Healthcare has team members in all 50 states. We recruit and support registered nurses, licensed practical nurses, surgical technicians, respiratory therapists, imaging technologists, laboratory specialists, and other experienced nursing and allied healthcare professionals. We staff hundreds of healthcare facilities across the U.S. in urban, rural, and underserved areas, including multi-state hospital systems, critical access hospitals, rural community hospitals, long-term care facilities, trauma centers, standalone clinics, and more. Learn more about TRS Healthcare at trshealthcare.com.

MedPro Healthcare Allied Staffing is seeking a travel MRI Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: MRI Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel MedPro Healthcare Staffing, a Joint Commission-certified staffing agency, is seeking a quality MRI Tech for a contract with one of our top healthcare clients. Requirements • Completion of a two year approved School of Radiologic Technology, • Valid state radiology registration as required by state law, • Eighteen months of MRI Tech experience preferred, ideally in a critical care setting., • Weekly pay and direct deposit, • Full coverage of all credentialing fees, • Private housing or housing allowance, • Group Health insurance for you and your family, • Company-paid life and disability insurance, • Travel reimbursement, • 401(k) matching MRI technologists utilize their knowledge of anatomy, physiology and the principles of MRI to safely and efficiently operate MRI scanners, assisting in the diagnosis of disease and injury. • Ensure the safety of patients, staff and visitors who come in contact with the powerful magnetic field of a MRI scanner., • Position patients and coils on a table that slides inside the MRI scanner., • Inject contrast media as required., • Set appropriate technical parameters, operate MRI scanners and related equipment, and observe image data on computer monitors during scans., • Be familiar with the differences from a normal image and an abnormal image., • Recognize and respond to life threatening situations., • Assure compliance with federal, state, and local technical and professional regulations and accepted practiced guidelines., • Delivers quality, cost effective patient care in a professional manner., • Works effectively to maintain an environment of excellence, which is patient focused, providing timely, compassionate, quality patient care. MedPro Healthcare Staffing is a Joint Commission certified provider of contract staffing services. Since 1983, we have placed nursing and allied travelers in top healthcare facilities nationwide. Join us today for your very own MedPro Experience®. If qualified and interested, please call for immediate consideration. MedPro Staffing is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, national origin, age, sex, disability, marital status or veteran status. Key Words: MRI Tech, MRI Technician, MRI Technologist, Magnetic Resonance Technologist, Magnetic Resonance Imaging *Weekly payment estimates are intended for informational purposes only and include a gross estimate of hourly wages and reimbursements for meal, incidental, and housing expenses. Your recruiter will confirm your eligibility and provide additional details. MedPro Job ID #a0Fcx000008BuFCEA0. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: MRI Technologist Imaging: MRI Technologist. About MedPro Healthcare Allied Staffing At MedPro Healthcare Staffing, we believe no one cares more for caregivers than we do. Our mission is simple: you focus on your patients, and we’ll take care of the rest. As a Joint Commission-certified leader in temporary and contract healthcare staffing since 1983, MedPro has proudly connected nursing and allied travelers with top healthcare facilities across the nation. With thousands of job opportunities available nationwide, we make it easy to find assignments that align with your goals and lifestyle. Our on-staff clinical support team—alongside a compassionate group of experienced recruiters—provides hands-on guidance every step of the way. From Day 1 medical benefits and a 401(k) plan to personalized career support, we’re committed to ensuring every professional we serve feels valued, cared for, and empowered to succeed. Guided by a CEO who is a Registered Nurse, MedPro is built on a foundation of clinical insight and genuine compassion for the caregiving community. Through The MedPro Experience®, we deliver travel assignments that are rewarding, memorable, and designed to help you DREAM big, EXPLORE often, and ACHIEVE greatness. Benefits • Day 1 medical, dental, and vision benefits for you and your family, • Weekly pay and direct deposit, • Unlimited Referral Bonuses starting at $500, • On Staff Clinical Support Team, • Access to nationwide travel assignments, • MPX+ Mobile app -24/7 real-time access to jobs, credentials, assignment details, and more, • Full coverage of all credentialing fees, • Private housing or housing allowance, • Tax Free Per Diems, Housing Stipends and Travel Reimbursements, • Company-paid life and disability insurance, • Travel reimbursement, • 401(k) matchingBenefits, • Weekly pay, • Employee assistance programs, • Referral bonus

TRS Healthcare is seeking a travel Electrophysiology Technician for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: Electrophysiology Technician, • Discipline: Allied Health Professional, • Start Date: 01/05/2026, • Duration: 14 weeks, • 40 hours per week, • Shift: 10 hours, days An RN-founded, woman-owned company, TRS Healthcare has team members in all 50 states. We recruit and support registered nurses, licensed practical nurses, surgical technicians, respiratory therapists, imaging technologists, laboratory specialists, and other experienced nursing and allied healthcare professionals. We staff hundreds of healthcare facilities across the U.S. in urban, rural, and underserved areas, including multi-state hospital systems, critical access hospitals, rural community hospitals, long-term care facilities, trauma centers, standalone clinics, and more. Learn more about TRS Healthcare at trshealthcare.com.

AG Globe Services is seeking a travel CT Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: CT Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights Highlights & Perks: • $2,349/week, • OT/Holidays is paid at 1.5x the gross hourly blended rate, • 3x12s night shift: Friday - Sunday 7:00pm - 7:30am, • Local candidates welcome! Requirements: • ARRT(CT) certification, • BLS certification, • 1+ year recent CT tech experience in a hospital setting Why Clinicians Love This Contract: • Prime location in Atlanta!, • Consistent night shift schedule, • Recruiter support that answers the phone Want more details? Send me a message here and I’ll provide full pay breakdowns and scheduling info. AG Globe Services Job ID #WL014. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About AG Globe Services AG Globe Services is one of the major providers of clinical and non-clinical healthcare staffing across the United States. We work with Clinical and Non-Clinical professionals to be deployed at Long- Term Healthcare facilities, Hospitals, Medical Centers and Behavioral Health Facilities. AG Globe is committed to finding the right talents to match the needs of our clients. Benefits • Medical benefits, • Referral bonus

Prime Staffing is seeking a travel MRI Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: MRI Technologist, • Discipline: Allied Health Professional, • Start Date: 01/05/2026, • Duration: 12 weeks, • 36 hours per week, • Shift: 12 hours, • Employment Type: Travel About the Position Specialty: MRI Technician Experience: Minimum 1 year of recent MRI experience preferred License: ARRT Certification (MR) Certifications: BLS – AHA required Must-Have: Proficiency in operating MRI scanners, understanding of safety protocols, ability to work with contrast agents, and patient care experience \n Description: The MRI Tech performs magnetic resonance imaging procedures to produce high-quality diagnostic images. Responsible for preparing patients, ensuring safety compliance, operating MRI equipment, and working closely with radiologists and physicians. \n Requirements Required for Onboarding \n\n • ARRT (MR) Certification\n We offer a wide range of staffing services including temporary, temp-to-perm, and direct hire placements. Our extensive network of qualified candidates includes nurses, allied healthcare professionals, corporate support professionals and executives.

Genie Healthcare is seeking a travel Ultrasound Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: Ultrasound Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel Genie Healthcare is looking for a Radiology/Imaging to work in Ultrasound Tech for a 12.71 weeks travel assignment located in Atlanta, GA for the Shift (5x8 Days - Please verify shift details with recruiter, 07:00:00-15:00:00, 8.00-5). Pay and benefits packages are estimated based on client bill rate at time the job was posted. These rates are subject to change. Exact pay and benefits vary based on several things, including, but not limited to, guaranteed hours, client changes in bill rate, experience, etc. Benefits: Medical Insurance, Dental Insurance, Vision Insurance, 401(k) with company matching (50% up to 6% of what you contribute) Genie Healthcare Job ID #17472973. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Radiology/Imaging:Ultrasound Tech,07:00:00-15:00:00 About Genie Healthcare Genie Healthcare is one of the fastest growing Nurse Travel Agencies in the USA. Genie serves hundreds of facilities and has over 4000 current travel RN contracts open at any given time. \n\n Genie provides travel RN’s flexibility, support, top pay scale, housing and the #1 rated, multi-state health insurance coverage. \n\n Genie Healthcare carries with it a commitment to providing a comprehensive level of service and quality care. Growing from a small team of eager recruiters to a company with satisfied clients in nearly every corner of the nation, delivering excellence in patient and customer care is the key to Genie’s success. \n\n The management team has 20 years of experience in workforce solutions and staffing in medical and non-medical fields, roles ranging from Clerical job to Cardiologist to software developer to CEO.

LeaderStat is seeking a travel CT Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: CT Technologist, • Discipline: Allied Health Professional, • Start Date: 12/08/2025, • Duration: 16 weeks, • 40 hours per week, • Shift: 8 hours LeaderStat is currently seeking a CT Tech Radiology / Cardiology for a(n) 16 week contract in GA. Start Date: 12/8/2025 End Date: 3/30/2026 Shift: Day 4x10-Hour (12:00 - 22:30) • 1 year of experience working as a full-time Radiation Technologist, • Clinical experience within the last 2 years, • Current State Licensure Our goal is to find the best travel healthcare assignments to fit your individual needs. While you focus on providing top-notch care to your patients, we’ll handle the rest. LeaderStat Perks & Benefits As a traveling healthcare professional with LeaderStat you receive excellent benefits: • Weekly Pay & Direct Deposit, • W2 Employee Status, • 401(k) Retirement Plan, • Medical, Dental and Vision Insurance, • Referral Bonuses For 20 years, LeaderStat has been dedicated to partnering with exceptional healthcare providers to find them the very best assignments throughout the country. Specializing in Travel Nursing, Interim Leadership, Executive Search, and Consulting. When you work with the LeaderStat team, you work with a recruiter who is dedicated to finding you the perfect assignment. Why would you settle for less? Benefits • Referral bonus, • License and certification reimbursement, • Medical benefits, • Holiday Pay, • Weekly pay, • 401k retirement plan

ALOIS Healthcare is seeking a travel Radiology Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: Radiology Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, evenings ALOIS Healthcare Job ID #17291423. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Rad Tech Acute About ALOIS Healthcare Why ALOIS Healthcare? ALOIS means “brave warrior” and that’s what you are- Warrior in Scrubs! Just as you advocate for your patients, we will advocate for you. The pay you deserve. The support you need. We’re in your corner for every battle – because you shouldn’t settle for anything less when it comes to your career. We offer: · Industry-leading pay · Weekly health insurance or health insurance Marketplace weekly bonus · Continuing education credits We’re proud to be recognized globally as a certified minority-owned staffing supplier. At ALOIS Healthcare: · Everyone Matters · We are Performance Driven · We are Open, Honest and Direct · We are Transparent · We are Inclusive · We Do the Right Thing We care about you - and your success is our success.

ALOIS Healthcare is seeking a travel CT Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: CT Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days ALOIS Healthcare Job ID #17441094. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: CT Tech Acute About ALOIS Healthcare Why ALOIS Healthcare? ALOIS means “brave warrior” and that’s what you are- Warrior in Scrubs! Just as you advocate for your patients, we will advocate for you. The pay you deserve. The support you need. We’re in your corner for every battle – because you shouldn’t settle for anything less when it comes to your career. We offer: · Industry-leading pay · Weekly health insurance or health insurance Marketplace weekly bonus · Continuing education credits We’re proud to be recognized globally as a certified minority-owned staffing supplier. At ALOIS Healthcare: · Everyone Matters · We are Performance Driven · We are Open, Honest and Direct · We are Transparent · We are Inclusive · We Do the Right Thing We care about you - and your success is our success.

Prime Staffing is seeking a travel CVOR First Assist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: CVOR First Assist, • Discipline: Allied Health Professional, • Start Date: 03/16/2026, • Duration: 11 weeks, • 36 hours per week, • Shift: 12 hours Prime Staffing Job ID #34714817. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Surgical Tech:Surgical Tech,07:00:00-19:30:00 About Prime Staffing At Prime Staffing, we understand the importance of finding the perfect fit for both our clients and candidates. Prime Staffing utilizes a unique matchmaking approach, providing the most qualified contingent staffing to our clients, and the most competitive contracts to our workforce. Our experienced team takes the time to get to know both our clients and candidates, their needs, and preferences, to ensure that each placement is a success. We offer a wide range of staffing services including temporary, temp-to-perm, and direct hire placements. Our extensive network of qualified candidates includes nurses, allied healthcare professionals, corporate support professionals and executives.

LeaderStat is seeking a travel MRI Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: MRI Technologist, • Discipline: Allied Health Professional, • Start Date: 01/05/2026, • Duration: 12 weeks, • 36 hours per week, • Shift: 12 hours LeaderStat is currently seeking a MRI Tech for a(n) 12 week contract in GA. Start Date: 1/5/2026 End Date: 3/30/2026 Shift: Day 2x12-Hour (07:00 - 19:30) • 1 year of experience working as a full-time Technologist, • Clinical experience within the last 2 years, • Current State Licensure Our goal is to find the best travel healthcare assignments to fit your individual needs. While you focus on providing top-notch care to your patients, we’ll handle the rest. LeaderStat Perks & Benefits As a traveling healthcare professional with LeaderStat you receive excellent benefits: • Weekly Pay & Direct Deposit, • W2 Employee Status, • 401(k) Retirement Plan, • Medical, Dental and Vision Insurance, • Referral Bonuses For 20 years, LeaderStat has been dedicated to partnering with exceptional healthcare providers to find them the very best assignments throughout the country. Specializing in Travel Nursing, Interim Leadership, Executive Search, and Consulting. When you work with the LeaderStat team, you work with a recruiter who is dedicated to finding you the perfect assignment. Why would you settle for less? Benefits • Referral bonus, • License and certification reimbursement, • Medical benefits, • Holiday Pay, • Weekly pay, • 401k retirement plan

AHS Staffing is seeking a travel CT Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: CT Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 12 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel AHS Staffing is looking for a CT Tech Radiologic Technologist in Atlanta, GA for a Long Term (Travel) position. This assignment is expected to last 12 weeks. Apply today to speak with a recruiter about the position! AHS Job ID #2325261. Posted job title: Radiologic Technologist CT Tech About AHS Staffing At AHS Staffing, we are committed to providing a personalized, transparent, and rewarding experience. We go beyond the transactional nature of the industry by offering individualized job matching, clear communication, no-nonsense pay rates, and dedicated recruiter support 24/7. When you're on assignment with us, you'll get access to industry-leading benefits, including comprehensive medical coverage, 401(k) matching, competitive pay packages, licensure reimbursement, weekly pay, and more. Easily manage your day-to-day with our mobile app where you can view your assignment details, manage your compliance and licensing documents, submit timecards, and browse new jobs to land your next adventure. As a nationally recognized and award-winning agency, we understand the importance of providing a seamless experience from application to placement. Our top priority is matching you with assignments that align with both your personal and professional goals. Join us to experience working with an agency that truly prioritizes your success and well-being and see why thousands of healthcare professionals continue to trust us with their careers.

Slate Healthcare is seeking a travel Mammography Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: Mammography Technologist, • Discipline: Allied Health Professional, • Start Date: 12/22/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel No local candidates within 50 miles. Schedule 8a-430pm M-F 13 weeks Requesting to add a Travel Mammo Tech at Marietta Imaging and will help support the Mammo Tech and the Mammo volumes on the diagnostic days. 391A NSH/Marietta Imaging - Mammo Tech Min of 2 years of experience within specialty. Required BLS ARRT Cert Outpatient imaging department providing CT, MRI, x-ray, fluoroscopy, bone density, ultrasound and screening and diagnostic mammograms. Winter Holiday Expectations: MUST work 1 major Holidays of the 2: Christmas Day New Years Day AND 1 Minor Holiday: Christmas Eve New Years Eve Slate Healthcare Job ID #ab97ea26-723a-4aa7-ae12-01cf4070d2c4. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Slate Healthcare Slate Healthcare is a premier travel healthcare staffing agency, connecting healthcare professionals with thousands of opportunities at top-tier hospitals and facilities across the country. We’re committed to supporting nurses and allied health professionals in building stable, fulfilling careers—while embracing the freedom and excitement that comes with travel. Our goal is simple: to offer flexibility, competitive pay, and personalized placements that align with each clinician’s lifestyle and career goals. At Slate, we empower our professionals to choose when and where they work, while ensuring they receive the highest compensation possible—because we believe that exceptional care starts with empowered caregivers.

TRS Healthcare is seeking a travel Mammography Technologist for a travel job in Atlanta, Georgia. Job Description & Requirements • Specialty: Mammography Technologist, • Discipline: Allied Health Professional, • Start Date: 01/12/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days An RN-founded, woman-owned company, TRS Healthcare has team members in all 50 states. We recruit and support registered nurses, licensed practical nurses, surgical technicians, respiratory therapists, imaging technologists, laboratory specialists, and other experienced nursing and allied healthcare professionals. We staff hundreds of healthcare facilities across the U.S. in urban, rural, and underserved areas, including multi-state hospital systems, critical access hospitals, rural community hospitals, long-term care facilities, trauma centers, standalone clinics, and more. Learn more about TRS Healthcare at trshealthcare.com.

Olaro is seeking a travel CT Technologist for a travel job in Decatur, Georgia. Job Description & Requirements • Specialty: CT Technologist, • Discipline: Allied Health Professional, • Start Date: 12/08/2025, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights Olaro is a trusted partner in healthcare staffing, connecting nurses and allied health professionals with opportunities nationwide. For over 35 years, we’ve helped clinicians expand their horizons by matching them with assignments that fit their lifestyle, career goals, and personal ambitions. At Olaro, we value your expertise and support your growth at every step. We offer competitive pay, comprehensive benefits, and access to diverse clinical experiences that build your skills and open doors to new possibilities. With 24/7 support, streamlined onboarding, and a team committed to your success, you’ll always have a proven guide by your side. Whether you want to explore new locations, broaden your clinical experience, or achieve better work–life balance, Olaro provides the flexibility and support to help you thrive. Join us, and let’s shape the future of healthcare together.