Waste jobs in Plainfield, New JerseyCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Knowledge and ability to perform Preventative Maintenance services with general knowledge related to heavy duty and light duty trucks. This may include gasoline, diesel and CNG Systems. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Aid/assist drivers in completion of the daily Post trip and vehicle safety inspection process, • Conducts safety checks on vehicles and equipment during Safety Lane and PM's., • Complete lubrication and repair of lubrication points on vehicles as assigned on the daily schedule, • Ability to learn and utilize brake inspection procedures and complete documentation daily, • Perform basic repairs and maintenance on Heavy Duty Equipment, including but not limited to Rear Load, Front Load, Roll Off, Grapple, Port-a-let, and other service type trucks including chassis and body., • Communication with A & B technicians /drivers as to issues with vehicles and discusses preventative techniques that may minimize future repairs., • Completes all required paperwork / computer data entry, including documenting parts usage and time in and out on repair orders, in a timely and concise manner., • Maintains a clean, safe work area in compliance with corporate and OSHA standards which may include sweeping, organizing and maintaining the shop and grounds areas., • Conducts repairs utilizing Factory Service Manuals., • Maintain high standard of Ethics and Dependability., • Follows all safety policies and procedures. Requirements and Qualifications::, • Ability to assist drivers with Pre/Post trip process, • Ability to identify visible repairs required on vehicles: lights, mirrors, leaks, body damage etc., • Ability to assist/complete fluid top up on vehicles including oil, hydraulic fluids, transmission fluid, DEF fluid, • Knowledge of tire inspections and air pressure adjustments, • Ability to support technicians in repair of lights, wipers, mirrors., • Ability to understand and use lubrication charts for waste trucks, • Ability to lubricate components on trucks as scheduled (training provided), • Ability to assist technicians in the repair of basic engine, transmission, brake, suspension, electrical, hydraulic, body components and systems related to Heavy Duty and Light Duty Trucks., • Knowledge of all tools required to perform repairs and maintenance on vehicles., • Basic computer skills as required. OTHER JOB RESPONSIBILITIES: • Employees in this job classification must attend and participate in corporation sponsored training courses as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. • Employees in this job classification are responsible for keeping up to date on current technology, as job appropriate, • Any additional job duties that may be assigned by the Supervisor., • Exposure to chemical and residential waste., • Walking, Jogging, Twisting, Crouching, Lifting, • Sufficient stamina for steady work pace throughout the day, • Able to utilize all Personal Protective Equipment as mandated by company, • Physically able to get up and down from the cab of a commercial motor vehicle between 50 and 100 times a day, • Physically able to lift 50 to 75 pounds from the floor to waist height unassisted, • Physically able to lift 50 pounds from the floor to shoulder height unassisted, • Physically able to lift 50 pounds form the floor to overhead unassisted, • Physically able to push and pull 50 pounds unassisted, • Physically able to frequently (100-200 times) bend at the knees and waist, • Physically able to frequently (100-200 times) reach over your head or reach out with extended arms to perform work, • Physically able to frequently (100-200 times) twist at the waist to perform work, • Physically able to work in extreme temperatures and weather environments (road calls). WORK ENVIRONMENT: • Normal setting for this job is: Inside and Outside with occasional exposure to extreme weather conditions. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $27.00/Hr. Salary Range Maximum: USD $37.00/Hr.

Overview: Fuel Your Career with Us! Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work! Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. Schedule: Overnight Wednesday to Sunday 6pm to 5am. Essential Job Summary:: Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Performs all work in accordance with established safety procedures., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times., • Assists in the repair and adjustment of equipment., • Washes vehicles and equipment., • Conducts safety checks on vehicles., • Assists with service calls for breakdowns., • Perform other maintenance related work as required., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. Requirements and Qualifications:: • 2+ years’ experience working as a heavy-duty Diesel Mechanic, • Hydraulics experience is highly preferred, • Engine and transmission maintenance and repairs, • Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar., • Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components., • Maintain and repair exhaust systems equipped with DPF systems., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards., • Assists with service calls for breakdowns, • Must be able to provide own tools., • A valid driver’s license is required.Preform other duties as assigned. Additional Information: IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, hourly pay based on experience and paid overtime, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Vacation, Holidays, and Personal Days. We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $24.41/Hr. Salary Range Maximum: USD $50.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Yellow Iron Diesel Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks), • Performs repairs and assigned preventative maintenance services., • Estimates time and material cost on vehicle repairs and requisition of new parts., • Conduct safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time., • Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports., • Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards., • This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts., • Assists Sr. Technicians in the completion of project work. Work Environment • Potentially hazardous work environment with many moving parts and machinery; must be alert of surroundings at all times., • Only during breakdowns will this position be required to enter transfer station loading/ dumping area., • The Yellow Iron Diesel Technician/Mechanic may be required to lift up to 50 pounds. Frequent squatting and standing is required. Requirements and Qualifications:: Requirements • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required. CDL a plus., • At least 5 years of experience in job duties., • Sanitation or construction industry experience a plus., • Computer diagnostic experience as diesel technician a plus., • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Working knowledge of applicable DOT and OSHA standards and regulations., • Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position., • Must be able to provide own tools Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $30.00/Hr. Salary Range Maximum: USD $38.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Maintenance Technician Level B performs independent diagnostics, repairs, and preventive maintenance on MRF processing equipment while mentoring Level C technicians and supporting safe, reliable operations. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Diagnose and repair mechanical, hydraulic, pneumatic, and basic electrical issues., • Perform PM inspections and corrective maintenance to standard., • Document work accurately in the CMMS., • Support outages, vendor work, and equipment installations., • Follow all safety, LOTO, and PPE requirements., • Mentor Level C technicians and reinforce safe work practices. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years of hands-on maintenance experience., • Proficiency with mechanical systems and PM execution., • Ability to read service manuals and schematics. Preferred: • Experience in industrial maintenance, manufacturing, processing, recycling, municipal utilities, or material-handling systems., • Welding and fabrication skills., • OEM or technical training exposure. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $29.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Diagnostics & Repair • Independently diagnose and repair:, • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components)., • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines., • Air and hydraulic brake systems, ABS, and suspension components., • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing)., • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting. Preventive Maintenance & Compliance • Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented., • Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis., • Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues. Road Calls & Operational Support • Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed., • Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times. Mentorship, Training & Documentation • Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods., • Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used., • Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement., • Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT., • Demonstrated proficiency with hydraulic, pneumatic, and electrical systems., • Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics., • Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred., • ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred., • Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred., • Familiarity with computerized fleet maintenance and parts inventory systems preferred. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $28.80/Hr. Salary Range Maximum: USD $28.80/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Maintenance Technician Level A is the senior technical expert responsible for advanced diagnostics, complex repairs, and technical leadership across all MRF processing equipment. This role sets the standard for safety, workmanship, and reliability while mentoring lower-level technicians. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Advanced Diagnostics & Repair • Lead diagnosis and repair of complex mechanical, hydraulic, pneumatic, and limited electrical issues., • Perform major component rebuilds, overhauls, and precision alignment on critical processing equipment, • Troubleshoot chronic failures and support root-cause analysis efforts. Technical Leadership & Mentorship • Serve as the technical lead on shift and mentor Level B and C mechanics., • Verify quality of repairs, PM execution, and documentation., • Support OEM installations, upgrades, and contractor work. Preventive Maintenance & Reliability • Execute and refine PM tasks; recommend changes to intervals and procedures., • Identify and eliminate repeat failures impacting uptime and throughput. Administrative & Leadership Duties (as assigned) • Help plan daily plant maintenance workload and allocate jobs according to technician skill level., • Assist in specifying parts, evaluating repair options, and supporting warranty recovery efforts., • Support audits, safety inspections, and external regulatory reviews as the technical representative for the plant. Requirements and Qualifications::, • High school diploma or GED required., • 5+ years of industrial, fleet, or processing maintenance experience with demonstrated mastery of mechanical systems., • Strong welding and fabrication capability., • Proven ability to work independently and lead complex repairs. Preferred: • Experience as a senior technician or millwright in recycling, industrial maintenance, manufacturing, processing, aggregate, or material-handling environments., • OEM training on balers, conveyors, or processing systems., • Leadership or lead-technician experience. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.00/Hr. Salary Range Maximum: USD $35.00/Hr.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Safely and effectively operate and maintain all process equipment in the anaerobic digestion facility. Operators will work with equipment for feedstock unloading, biogas production and upgrading, wastewater treatment, dewatering and processing in the facility. Primary Duties/Responsibilities: • Perform job duties in a safe manner compliant with policies, procedures and practices., • Work flexible schedule that may include nights, weekends and holidays., • Responsible for operating and monitoring all control systems., • Performs anaerobic digestion process control and preventative maintenance functions., • Performs rounds on processing equipment, and diagnose basic operational problems and take corrective action per procedure., • Coordinates and works with maintenance staff and contractors on preventive and corrective maintenance functions., • Performs cleaning and general housekeeping duties in work areas including office, laboratory, cleaning of degritting and centrifuge, and other process equipment as assigned., • Will be required to operate automotive equipment, including heavy trucks, forklifts and front-end loaders., • Adheres to all site safety requirements and regulations, including wear personal protective equipment (PPE) as defined by policy, work practices, and customer., • May train or assist in the training of OITs and assigned helpers Work Environment: • Incumbent will be exposed to varied temperature extremes, noise, fumes, odors, confined spaces, elevated heights, dust, sitting for prolonged times in front of the computer.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Degree in related field/or equivalent work experience., • 3+ years of experience in the operation and maintenance of a chemical processing or wastewater treatment plant. Knowledge/Skills/Abilities: • Capable of being assigned as responsible charge of the facility with an ability to react to unplanned events. Required Certification/Licenses/Training: • Grade IV or higher Wastewater Treatment Plant Operators Certificate preferred., • New Jersey Low Pressure Black Seal Boiler Operator License preferred., • Valid driver’s license. Physical Requirements: • Ability to lift and carry up to 50 lbs., • Ability to perform the following: climbing ladders, straight pulling, reaching above the shoulder, pushing, walking, standing, crawling, kneeling, repeated bending and sitting for extended periods of time., • Ability to distinguish basic colors and various shades. Additional Information Pay Range: $36.00 to $41.00 per hour. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – 15 days Eligible for up to 3% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Summary The Cannabis Machine Operator for Bud's Goods of New Jersey is responsible planning, operating, and maintaining equipment at our facility in Linden, New Jersey. The primary operations of the facility will be the packaging of cannabis and cannabis products as a service to clients of the company. The Cannabis Machine Operator is responsible for leading and organizing a team of packaging techs in support of day-to-day machine operations. The Cannabis Machine Operator must be able to operate and oversee specialized automated cannabis packaging equipment and to keep the equipment clean and running efficiently at all times. This role's success relies heavily on the successful operation of the facility's automated cannabis packaging equipment; therefore an understanding of mechanical and electrical systems is required. The Cannabis Machine Operator's goal is for total client satisfaction and works hard to always adhere to Bud's Goods' high standards for quality and service to our clients and the terms of our client agreements. This role is responsible for the sanitation and proper batch change procedures to avoid potential contamination ensure our clients are provided safe and controlled products. The Cannabis Machine Operator reports to the Packaging Manager and works closely with the Vault Manager. This role reports to Linden, New Jersey, Monday through Friday, 6:30am to 3:00pm. 32-40 hours per week. Job Duties • Responsible for pre-shift assessment in conjunction with the Packaging Manager to assess work already completed and what work will be designated to run for the day., • Responsible for determining the work flow sequence to minimize changeovers., • Stages product work flow so it is ready for processing after pre-shift briefing to techs., • Provide leadership, direction, and supports Packaging Tech(s) assigned to their operating line for all operating activities including production runs, startups, changeovers and shutdowns., • Direct assembly or disassembly, and cleaning as required for shift start and end operations., • Work closely with Labeling Tech and Packaging Manager to prepare labeled containers (pouches, tubes, jars etc) in advance of production runs so that labeled product is not the bottleneck to production capabilities., • Conduct beginning and end of shift quality checks to verify the exiting product matches finished product specs. Quality checks may include weight verification, seal integrity, legibility etc., • Validate Product through every change of Metrc tag. Bagged product matches labor sheets and recipient bins so as to not mix products. Operator ensures finished product is adequately labeled and isolated to prevent mixed product., • Responsible for capturing operational data required on a labor sheet including hours, waste, residual product for handpack / shake and any non-cannabis waste., • Troubleshoot mechanical issues as they arise and attempt to resolve them before escalating to maintenance for intervention., • Assess machine operation and provide suggestions for improvements to safety and efficiency where possible., • As required interface and input operations data into Metrc, Distru, or other systems used by Buds to capture shift performance., • Conform to machine specific LOTO requirements when performing services or specific cleaning activities that require LOTO., • Ensure the packaging operations are in compliance with all local and state laws, as well as the Company's operational standards, • Serve as a leader and champion of Bud's values in the Packaging operations, • Learn and operate software used for the company's Manufacturing Execution Systems Skills & Attributes • Superior verbal and written communication and presentation skills with proficiency of grammar and the ability to adapt tone/style to a variety of audiences, • Strong organizational, critical thinking, presentation, and project management skills, • Ability to classify and triage issues and take appropriate action to resolve issues in self-sufficient manner, • Exceptional interpersonal and relationship building skills, • Advanced math and reading comprehension, • Strong business acumen with exceptional attention to detail, high stress tolerance, and exemplary emotional intelligence, • Ability to provide clear, timely, and coordinated directives, catering communication styles to different levels of the workforce, • Understands and thrives in fast-paced, KPI-driven production environments, • Team player willing to assist in any function of packaging and labeling, • Ability to prioritize the business in all decision making Education & Experience • HS Diploma or 2+ years of related field experience, • 1+ years of experience in a leadership role, • 2+ years of production or manufacturing experience, preferably with 1+ years in cannabis industry, • Must have a solid understanding of the cannabis laws, rules and regulations and passion to further understanding and knowledge of the industry, regulations, market trends and competition, • Experience working with various complex manufacturing machines or electrical systems, • Proven track record of managing the scope of operations in a complex and highly regulated business environment, • Cannabis product knowledge strongly preferred, • Working knowledge of Metrc preferred Working Conditions/Physical Demands: • Able to stand or sit for extended periods of time., • Able to lift up to 50 pounds, • Able to work a fully flexible schedule including nights and weekends if necessary, • Extensive use of hands, including repetitive movements Additional Requirements: • Must pass all required background checks, • Must have a reliable vehicle, • Must be and remain compliant with all legal or company regulations for working in the industry, • Must possess valid driver's license, • Must be a minimum of 21 years of age, • Must be approved by Cannabis Regulatory Commission to work in cannabis industry Benefits: We offer a competitive benefits package designed to support our employees' health and financial well-being. Full-time team members are eligible for medical, dental, and vision insurance, as well as participation in our Operator Incentive Plan, which rewards strong performance and operational excellence. #ENGHP

Job Description CDL - A Waste and Roll Off Truck Drivers - Seeking Company Drivers! Are you ready to embark on a career where every mile counts? Action is ready for you. We’re always looking for drivers who take pride in their qualifications, experience and knowledge. We invest in drivers who never compromise safety and who are looking for experience beyond the average load. Additional Compensation: • Company Drivers earn $80,000-$90,000 annually, • Safety Bonuses, • $2,000 Referral Bonus (For Drivers Referring New Hires - Extended Pay Out) Benefits: • Flexible Home Time, • Impressive Routes with easy to work with customers, • Terminal Dispatch with small company atmosphere at every terminal location Requirements: • 1 year tractor trailer experience within the last 3 years, • 6 month tanker experience, • Class A-CDL with Hazmat and Tanker, • TWIC Application Proof/Receipt, • If you’re passionate about driving safely, exceeding expectations and being part of a team that values professionalism and dedication, consider joining us on the exciting road ahead.

Role: Mechanic Location: Waste Connections-Brooklyn Schedule: Monday through Friday, with alternating Saturdays as needed Hours: 7A-3:30P (OT based on workload) Rate: $28–$32/hr, depending on experience Employment Type: Full-time #ACMaintenance

🔧 Mechanic Location: Royal Waste-Jamaica or our Bronx Location Schedule: Monday through Friday, with alternating Saturdays as needed Hours: 8:00 AM – 4:30 PM Rate: $30–$40/hr, depending on experience Employment Type: Full-time Royal Waste is seeking a dedicated and skilled Mechanic to join our growing maintenance team. We're looking for individuals who prioritize safety, take pride in their work, and understand how critical their role is to supporting our drivers and the service we provide to the community. Key Responsibilities Perform inspections, repairs, and diagnostics on diesel vehicles, including electrical, hydraulic, suspension, brake, and air systems Interpret vehicle computer system failure codes and make necessary adjustments to engine and vehicle control modules Review and complete repairs noted on Driver Vehicle Inspection Reports Accurately document services using fleet maintenance software Conduct post-service test drives to ensure safety and performance Collaborate with teammates on complex repairs Maintain professional, courteous communication with drivers and team members Keep workspaces clean and compliant with OSHA standards Perform other job-related duties as assigned What We're Looking For Minimum 5 years of mechanic experience, preferably with diesel trucks Strong skills in electrical and hydraulic systems Well-rounded experience in mechanical and welding repairs Familiarity with diesel vehicle diagnostics and preventative maintenance Basic tool set required Valid CDL Class B or A license, not required but a big plus Ability to work independently within a shop environment Commitment to safety, quality, and teamwork What We Offer Competitive compensation 401(k) with company match Medical, dental, and vision coverage Life insurance and short-term/long-term disability Employee Assistance Mental Health Program Emergency Travel Assistance & Prepaid Legal Plan Employee Stock Purchase Plan & Employee Relief Fund Scholarship opportunities for employees’ children Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status. #ACMaintenance

Job DescriptionDescription: Description Eastern Metal Framing is looking for a motivated and reliable Forklift Operator to add to our Production department. You will have the opportunity to be part of a fast pace and growing company. We are looking for candidates with a strong work ethic, positive attitudes and a willingness to learn. The Forklift Operator will be responsible for the movement of material. Job Functions • Loading and unloading material, • Moving goods packed on pallets or in crates around the warehouse, • Stacking material in the correct storage, following inventory control instructions, • Checking to be sure loads are secure, • Stacking empty pallets, • Performing daily equipment checks such as recharging the truck’s battery and checking equipment, • Removing machine attachments and waste material from machines, • Examining products to verify conformance to quality standards Requirements: Requirements • HS Diploma or equivalent, • (Two) 2 plus year operating a Forklift, • Forklift Certified, • Excellent integrity, strong character and takes initiative, • Excellent interpersonal skills to interact with people from all levels and departments., • Ability to communicate effectively in English. Bi-lingual, desired., • Ability to use computers and software such as Microsoft Office Suite and Eastern Metal Framing Warehouse Management System., • High attention to detail.

Job DescriptionDescription: As a Driver at Lewis Environmental, you will be a critical part of our team, responsible for driving commercial vehicles to support a variety of Environmental Services projects. Your role will include transporting hazardous and non-hazardous materials, responding to environmental emergencies, and ensuring the safe and efficient operation of all vehicles. This position offers the opportunity to make a significant impact by ensuring safety and compliance in our day-to-day operations and emergency response efforts. Requirements: Key Responsibilities Vehicle Operation: Safely drive commercial vehicles to support a wide range of environmental services projects. Compliance: Maintain all DOT and OSHA certifications required for operating a CDL truck, including transporting hazardous and non-hazardous materials. Safety: Follow all company safety rules and OSHA regulations. Attend required safety training programs to ensure a safe working environment. Emergency Response: Participate as a member of the On-Call Emergency Response Team, responding to environmental spills and other emergencies. Vehicle Maintenance: Perform pre- and post-trip vehicle inspections and ensure all equipment is maintained in excellent working condition. Regulatory Adherence: Ensure compliance with all regulations regarding the transportation of hazardous and non-hazardous waste. Team Collaboration: Perform Service Technician duties as part of our team-based operations philosophy, assisting in the completion of various environmental tasks. Qualifications Experience: Minimum 2 years of experience as a CDL driver, preferably with hazardous material handling experience. Licensing: Valid CDL license with Hazmat and Tanker endorsements required. Motor Vehicle Record: Clean Motor Vehicle Record (MVR) and successful completion of a criminal background check, including an acceptable FMCSA record. Safety & Compliance: Strong commitment to safety, quality, and compliance with all industry regulations. Training: 40 hours of OSHA and related safety training is a plus, though training will be provided. Availability: Willingness to work flexible hours, including being on call during weekends and after hours. Physical Requirements Vehicle Operation: Ability to sit for extended periods while operating a motor vehicle. Manual Labor: Ability to lift up to 60 lbs. and perform manual labor tasks as part of daily duties. Weather Conditions: Ability to work in severe weather conditions, both hot and cold. Confined Spaces & Safety Gear: Ability to work in confined spaces and wear a respirator as needed. Clean shaven requirements for respirator use. Physical Effort: Ability to stand and exert physical effort performing manual labor 50-70% of the time. Noise Exposure: Able to tolerate exposure to moderate noise levels. Why Join Us? At Lewis Environmental, we are dedicated to fostering a supportive and inclusive environment where safety, teamwork, and professional development are prioritized. We offer opportunities for growth and provide comprehensive training and support to ensure that our team members succeed and thrive. Equal Opportunity Employer Lewis Environmental is an Equal Opportunity Employer and is committed to building a diverse workforce. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. All qualified applicants will receive consideration for employment without regard to any protected characteristic.

POSITION: Facilities Engineer DEPARTMENT: Maintenance REPORTS TO: Operations Manager POSITION SUMMARY: The Facilities Engineer is responsible to fulfill the mechanical needs of both the equipment and the physical structure. This position will be responsible for the installation, maintenance, and troubleshooting of all facility equipment and machinery. In addition, he/she will be responsible for some light carpentry, painting, basic plumbing, and other duties required in the maintenance of the building. The Facilities Engineer will have direct responsibility for performing some electrical work throughout the plant and contracting, scheduling, and overseeing the work of outside labor when necessary. This individual will make recommendations regarding purchasing supplies and equipment needed to run the Maintenance Department as well as for scheduling basic equipment maintenance. He/She must consistently and efficiently perform and follow procedures in compliance to company, customer, and ISO standards. PRINCIPAL JOB RESPONSIBILITIES: • Diagnose problems and make repairs on equipment in order to minimize machine ‘downtime’ and, if necessary, schedule outside labor; i.e. factory repair., • Schedule and perform preventive and predictive maintenance on equipment., • Install and/or assist with installation of factory equipment., • Operate all shop equipment including all power equipment., • Perform some sheet metal work., • Perform electrical, plumbing, and other duties required for efficient operation of the physical plant including some HVAC programming., • Complete daily maintenance and repair logs., • Maintain and secure work tools., • Clean and maintain all work areas., • Contributes to team effort by accomplishing related results as needed., • Perform additional duties/projects as assigned by lead, management and/or Supervisor. SAFETY RESPONSIBILITIES: Must learn and comply with all Cultech, Inc. safety rules; reference to employee handbook. PRINCIPAL SKILLS AND FUNCTIONS (5+): • Ability to work independently and as part of a team with a high level of initiative and flexibility., • Capable of understanding technical customer requirements., • Ability to work and multi-task under pressure in a fast-paced environment to meet customer deadlines., • Constantly produces high quality work and maintain established production standards. JOB REQUIREMENTS: • High school education required; College degree with an emphasis on engineering preferred., • Licensed in electrical preferred; proficiency required., • Proficient in machine repair., • Proficient in use of welding equipment., • Knowledge of printing specific equipment, • Skilled in plumbing, carpentry, HVAC, electrical, and piping skills., • Familiarity with OSHA standards regarding potential job hazards and protocols., • Must be able to stand for long periods of time and work in potentially uncomfortable positions., • Ability to work effectively in a team environment., • Must be attentive to detail., • Must be able to comprehend and follow all job procedures and safety protocols. ADDITIONAL REQUIREMENTS: Employees must fulfill the performance standards of this position and comply with policies, rules and procedures of Cultech, including those set out in the Employee Handbook or otherwise communicated (verbally or in writing) to employees.As necessary, employees are expected to manage waste and chemical products properly. This job description is intended to describe the general nature and work responsibilities of the position and is not intended, and should not be construed, to be an all-inclusive list of responsibilities, skills, efforts or working conditions associated with this position. This job description and the duties of this position are subject to change, modification and addition as deemed necessary by Cultech management. Employees are required to comply with supervisory instructions and perform other job duties, responsibilities and assignments as requested by supervisors or management. The job responsibilities of this position may include cross training in other functions or positions to ensure satisfactory operation of the department or work area. This job description does not constitute an employment contract between Cultech and any employee.

Sr. GMP Technician General Requirements: • Following local procedures, • Completing required training, • Adhering to GMP requirements for documentation of activities, • Cleaning, sanitizing, and breaking down equipment, • Operating GMP manufacturing/cleaning equipment Education: • High School Diploma, • Certifications: Not required, but a certification in pharm processing would be beneficial Experience: • 2-4 years’ experience in a GMP facility Responsibilities: • Prepare the appropriate disinfectants as per SOP., • Understand the dwell time for all cleaning agents/chemicals., • Cleaning of the processing rooms following manufacturing processes and as required per procedure. Remove all trash/biohazard waste bags from the MFG area., • Stocks all gowning materials in all air locks and locker rooms., • Execute cleaning of major and minor pieces of equipment and ancillary equipment, • Disassembly and reassembly of equipment per procedure (as required), • Perform cleaning activities on the isolators and filling line, • Perform cleaning verification activities to support cleaning validation, • Accurately documenting activities in the appropriate logbooks., • Able to work with a respirator during special assignments, if required., • Maintain materials inventory., • Report any unexpected observations to area management., • Perform tasks under minimal supervision, and within tight timelines to meet production schedule., • Coordinate with engineers & maintenance personnel in facility upkeep, • Author and revise SOPs and logbooks., • Reviews logbooks at the end of the shift to ensure proper GDP. Requirements: • Good interpersonal skills and attention to detail., • Previous experience in cleaning the GMP area is required., • Must be able to follow GMP regulations during operations, including adherence to written procedure and contemporaneous documentation., • Must be able to record data accurately and legibly., • Ability to perform in a team setting in a controlled environment for long periods of time. Physical Requirements: • Physically capable of donning and wearing cleanroom/protective gowning and equipment, including but not limited to gowning, goggles, face shields, and protective gloves. PPE is essential for the health and safety of employees, • Perform operations within ISO Class clean rooms, • Employees must be able to lift and/or move up to 40 pounds, • Must be able to squat, bend, kneel, and or reach for 40% of a shift, • Must be able to stand, walk, and/or move about for 40% of a shift

LyondellBasellis a leader in the global chemical industry creating solutions for everyday sustainable living. With a nearly 70-yearlegacy that includes a Nobel Prize in Chemistry and our proprietaryMoReTecrecycling technology, LYB is enabling a more sustainable future for generations to come. LYB develops high-quality and innovative products for applications ranging from sustainable transportation and food safety to clean water and quality healthcare. LYB places high priority on diversity, equity and inclusion and is Advancing Good with an emphasis on our planet, the communities where we operate and our future workforce. We'readdressing the global challenges of ending plastic waste, taking climate action, and supporting a thriving society, while generating value for our customers, investors, and society. This position is responsible for the monitoring and operation of plant process equipment used in the manufacturing process. The incumbent evaluates the unit's operating status and performs troubleshooting of processes and equipment in order to maximize unit reliability and quality production. The incumbent documents various operating parameters and maintains communication with others inside and outside of their department. The incumbent also monitors maintenance activities and performs minor maintenance. This position receives direction from a production supervisor and support from the process specialist, maintenance and technical personnel. Must join Emergency Response Team Responsible for personal safety, the safety of co-workers and promoting a safe work environment; responsible for carrying out all work activities in compliance with state and federal environmental regulations. Performs their duties in adherence with LYB procedures, standards, and specifications. Takes personal leadership role in daily activities, task planning, incident investigations and work performance as they relate to the LYB's key focus areas of Safety, Environmental, Quality, Reliability, and Cost of operation. Responsible for gaining and maintaining process knowledge of the unit and process changes to the unit, to enable effective operation and detection of unusual process conditions; uses knowledge to troubleshoot and resolve issues. • Responsible for taking ownership of the unit to ensure production rates and right-first-time results are maximized and to ensure the unit is maintained in proper operating condition., • Responsible for taking readings, utilizing plant data/control systems and observing process conditions on a continual basis to maintain good control of the unit., • Provides accurate and timely communication to co-workers and works with other functions to improve individual and unit performance. Provides ideas, raises concerns, and promotes an environment in which everyone is treated with respect., • Responsible for performing minor maintenance on equipment and enters SAP work notifications on equipment in need of maintenance., • Responsible for placing systems in a safe condition for maintenance work, supporting maintenance activities and communicating status to the shift supervisor and coworkers., • Expected to serve and participate on committees dealing with investigations, policy and procedure development and special groups designed to improve the workplace environment., • Participate in the training and skill development of other operations technicians., • Engage in frequent developmental dialog with supervisor and others to continually enhance personal and group performance and development, • Candidates for this position must possess a High School diploma or GED., • The candidate must be willing and able to work outside, year-round under various weather conditions and must be able to work 12 hour rotating shifts and provide overtime coverage., • You must be capable of climbing, lifting up to 50 pounds, working in a confined space and from elevated platforms, and able to wear appropriate protective equipment including respirators., • The critical competencies for this position are communication, teamwork, problem solving and decision-making, results orientation, initiative, relationship building, and technological orientation., • Basic computer skills are also a requirement for this position., • Proof of valid driver license required. The compensation and reference to benefits for this role is listed on this posting in compliance with applicable law. Please note that the compensation and benefits listed below are only applicable for U.S. payroll offers. The anticipated pay for this role is $35.17 an hour. The selected candidate's compensation will be determined based on their skills, experience, and qualifications. Build PartnershipsDeliver ResultsDrive InnovationGrow CapabilitiesPromote InclusionMotivational FitTechnical Skills Learn more about our benefits Stay Connected! • Visit our LYB_, • Follow us onand, • Like us on_, • Subscribe to our_channel LyondellBasell is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, disability, age, veteran status, and other legally protected characteristics. The US EEO is the Law poster is available_. LYB is committed to providing reasonable accommodations for qualified individuals with disabilities. If you need assistance or an accommodation related to LYB's recruiting process, please email us at Careers@lyb.com. Applicants must be at least 18 years old. LyondellBasell does not accept or retain unsolicitedresumes or phone calls and/or respond to them or to any third party representing job seekers. . Regulatory Disclosure • The compensation and reference to benefits for this role is listed on this posting in compliance with applicable law. Please note that the compensation and benefits listed below are only applicable for U.S. payroll offers., • The anticipated salary range for this position is $35.17 an hour . The selected candidate's compensation will be determined based on their skills, experience, and qualifications.

Summary We are seeking an experienced Manufacturing Process Engineer with experience in powder-based manufacturing, with a strong chemistry background to lead and optimize manufacturing operations. This role is responsible for the design, improvement, and oversight of production processes, ensuring efficiency, quality, safety, and regulatory compliance. The ideal candidate combines hands-on plant experience with technical leadership, customer interaction, and cross-functional collaboration to drive continuous improvement across operations. Key Responsibilities • Design, develop, test, and improve mechanical systems, equipment, and process applications., • Analyze and optimize chemical and manufacturing processes to increase throughput, improve efficiency, and reduce waste., • Schedule and manage production operations involving blending, milling, drying, and screening equipment for maximum efficiency., • Lead employees across production and technical operations., • Oversee preventive maintenance and downtime activities to ensure operational reliability., • Conduct client laboratory testing, including data intake, feasibility studies, process development, optimization, and final reporting; ensure high client satisfaction., • Perform root cause analysis on process failures and implement corrective and preventive actions., • Manage operational budgets and present performance metrics and financial results to leadership., • Collaborate with operations, R&D, quality, and regulatory teams to implement new or improved processes., • Develop, maintain, and manage technical documentation, including SOPs, certifications, regulatory filings, and compliance records., • Ensure full compliance with FDA, DEP, EPA, cGMP, SQF, and other applicable regulatory and safety standards. Qualifications • Bachelor’s degree in Chemical Engineering, Process Engineering, or a related field., • Minimum of 5+ years of process engineering experience, • Experience in powder-based manufacturing within pharmaceutical, nutraceutical, cosmetic, or chemical industries., • Hands-on experience with laboratory equipment, including particle size analyzers, microscopes, moisture balances, and scales., • Proven ability to work directly with customers and present technical findings., • Strong understanding of chemical engineering fundamentals, including fluid dynamics, thermodynamics, and heat transfer., • Knowledge of industrial electrical control panels and their integration with manufacturing equipment., • Strong regulatory background, with responsibility for maintaining FDA, DEP, EPA, cGMP, SQF, and related programs., • Proficiency with CAD and process simulation software is a plus., • Excellent analytical, problem-solving, and organizational skills.

LyondellBasellis a leader in the global chemical industry creating solutions for everyday sustainable living. With a nearly 70-yearlegacy that includes a Nobel Prize in Chemistry and our proprietaryMoReTecrecycling technology, LYB is enabling a more sustainable future for generations to come. LYB develops high-quality and innovative products for applications ranging from sustainable transportation and food safety to clean water and quality healthcare. LYB places high priority on diversity, equity and inclusion and is Advancing Good with an emphasis on our planet, the communities where we operate and our future workforce. We'readdressing the global challenges of ending plastic waste, taking climate action, and supporting a thriving society, while generating value for our customers, investors, and society. As a member of the LyondellBasell Edison Site Leadership Team the Maintenance and Reliability Manager is responsible for supervising Maintenance, Reliability for executing work in a safe, reliable, cost-efficient, and environmentally responsible manner to achieve site and company goals. They will participate on the Edison Site Leadership Team to develop strategic plans, annual goals, drive gap closure efforts, and ensure alignment of plant activities with global manufacturing goals and the company strategic plan. They will participate on corporate teams to champion and implement corporate level strategic initiatives and goals. • Deliver GoalZERO performance through strong leadership, employee/contractor engagement, and management systems, • Provide overall guidance for long range programs defining strategic direction for mechanical integrity, inspections, and site development, • Enhance and administer a consistent system of measurement geared towards improving the effectiveness of reliability and proactive initiatives, • Adhere to regulatory and corporate standards by assessing gaps and opportunities and tracking progress toward compliance and continuous improvement, • Prepare and manage budgets in a cost efficient and responsible way to meet site goals and needs, • Lead, direct, and coach organization members in achieving business results and continuous improvement, • Interface with a diverse group of domestic customers including manufacturing, project management, turnaround, purchasing, and business functions on reliability/maintenance initiatives and projects, • Engage with department engineers, inspectors, and specialists to acquire, develop, and retain top talent, • Ensure Code of Conduct and all other LyondellBasell policies are consistently followed and administered, • Engineering BS degree with typically 10 years of experience working in refining, petrochemical or chemical manufacturing., • Demonstrated leadership ability gained through prior management and/or supervisory assignments., • Knowledgeable in broad technical areas such as - rotating equipment, fixed equipment, electrical equipment, instrumentation and analyzers., • Knowledge of business support functions and processes including SAP, purchasing, quality assurance, marketing, manufacturing accounting and budgeting practices and human resources., • Excellent written / oral communication skills with the ability to interface and communicate effectively with all levels of the organization and with external customers., • Working knowledge and understanding of company policies, health, safety and environmental requirements, operations, MOWP and other maintenance work processes referred Skills/Experience., • Understanding of budgeting and return on investment justification process/analysis., • Demonstrated proficiency in the following competencies: Strategic Leadership, Drives Results, Collaborates, Builds Effective Teams, Drives Improvement in Others, Champion of Change,, • Communication Effectiveness, Systemic Thinking., • Represents the Edison site with regard to managing a labor contract, participating in the grievance process and assisting with contract negotiations., • Collaborates with Human Resources and Edison Site Leadership team on labor relations management and personnel matters. LyondellBasell is proud to provide a competitive total compensation package designed to reward excellence and support the well-being of our employees. Our Total Rewards package includes equitable and market-competitive base pay as well as locally relevant incentives, fostering a culture of pay-for-performance that recognizes both individual and company achievements. We extend the following benefits to *eligible employees: Workplace Flexibility: The Company's Global Remote Work Policy allows eligible employees to request to work remotely up to two full days per standard work week at an approved location other than the designated worksite or office, such as at a home office with managerial approval. Comprehensive Health, Welfare, Life and Retirement Programs: Our comprehensive programs are aligned with local practices. 6% LYB match on 401(k) contribution 5% LYB cash balance pension plan accrual Comprehensive Well-being Benefits: Programs to support your physical, mental, financial, and social health, ensuring you receive the care you need, when you need it. Employee Stock Purchase Plan: The LYB ESPP offers a 10% discount on LYB stock for eligible employees in Germany, Italy, Netherlands, Spain, and US. Educational Assistance Program: To encourage self-development by providing financial aid for approved educational activities voluntarily undertaken by employees. Bravo Rewards Program: Recognizing outstanding employee contributions. Robust Medical and Life Insurance Packages: Offering a variety of coverage options to meet individual needs. Professional Development: Opportunities to learn and grow through training, mentoring, work experiences, community involvement, and team building activities. Competitive Vacation Policies: Generous annual leave to support your work-life balance. Global Adoption Policy: Support for employees expanding their families. Matching Gifts Program: Enhance the impact of your charitable contributions to qualified organizations. *Eligibility for certain benefits and rewards programs will vary based on your job status, work location and/or the terms of any applicable collective bargaining agreement and may be changed from time to time without notice, subject to applicable law. Build PartnershipsDrive InnovationGrow CapabilitiesPromote InclusionMotivational FitTechnical SkillsDeliver Results Learn more about our benefits Stay Connected! • Visit our LYB_, • Follow us onand, • Like us on_, • Subscribe to our_channel LyondellBasell is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, disability, age, veteran status, and other legally protected characteristics. The US EEO is the Law poster is available_. LYB is committed to providing reasonable accommodations for qualified individuals with disabilities. If you need assistance or an accommodation related to LYB's recruiting process, please email us at Careers@lyb.com. Applicants must be at least 18 years old. LyondellBasell does not accept or retain unsolicitedresumes or phone calls and/or respond to them or to any third party representing job seekers. . Regulatory Disclosure • The compensation and reference to benefits for this role is listed on this posting in compliance with applicable law. Please note that the compensation and benefits listed below are only applicable for U.S. payroll offers., • The anticipated salary range for this position is $146,880 - $201,960. The selected candidate's compensation will be determined based on their skills, experience, and qualifications.

In this role, you will report to the Area Operations Supervisor and will work closely with the Avantor's Lab and Production Services professionals to serve our customers by performing customized, mission-based lab work and research protocols that help return time back to science. Fully onsite position Location: Summit, NJ Shift: 7:30 AM - 4 PM (Monday - Friday) Hourly Range: $28 - $30 Benefits: Health and Wellness: Medical, Dental, Vision, and Wellness programs (eligible for medical coverage on day 1) Time Off: Paid Time Off (PTO), Company-paid holidays, Choice holidays, etc. Financial Well Being: Spending Accounts: Flexible Spending Account (FSA), Health Savings Accounts (HSA), commuter benefits, 401(k), tuition assistance, employee stock purchase plan discount Added Protection Coverage: To include critical illness, hospital indemnity, accident, legal, identity theft protection, pet, auto, and home insurance Recognition: Celebrate your peers and earn points to redeem for gifts and products What we're looking for Education: A high school diploma or GED is required Bachelor's degree preferred Experience: 2+ years of customer service, inventory replenishment, or material handling experience Scientific background or lab experience required Collaboration Tool: Microsoft Teams experience preferred Basic computer skills, including Microsoft Office Must be able to lift up to 50lbs Previous experience working in a GMP facility is strongly desired Strong communication skills How you will thrive and create an impact Avantor's Lab and Production Services team is a crucial part of the Avantor Services group serving over 500 customers in biopharma, pharmaceutical, educational, industrial, and high-tech industries with customizable, flexible solutions and end-to-end laboratory operations support. In this role, you will: Maintain and inspectsafety equipment, including eyewash stations, fire extinguishers, and fume hoods. Collect, clean, and returnlaboratory glassware; ensure timely turnaround of dirty glassware from labs. Sterilizeglassware, bioreactor components, and tubing assemblies using autoclaves as needed. Conduct weekly laboratory safety auditsand document findings. Report equipment malfunctionsand initiate work orders for timely repairs. Establish and manageconsumable stocking locations to ensure consistent availability. Oversee daily inventoryof lab consumables; restock and organize as necessary. Utilize barcode scanning systemsto place and track product orders. Receive, unpack, and organizeincoming supplies; dispose of packaging materials appropriately. Place procurement orderson behalf of customers using Avantor and Kenvue platforms. Monitor and manage inventory metrics,including inventory turns, overhead, and customer expenditures. Perform scheduled deep cleaningand de-trashing of laboratory spaces. Clean around equipmentand monitor/remove biohazard waste in compliance with safety protocols. Maintain accurate recordsof daily, weekly, and monthly verifications in both physical and digital logbooks. Execute multiple cleaning protocolsas outlined in client-specific SOPs, with varying levels of complexity. Ensure the availability of critical partsto prevent disruptions in lab or manufacturing operations. Chemically inactivate equipmentcontaining residual product before maintenance or disposal. Operate specialized cleaning equipmentas required for sanitization tasks. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer. Why Avantor? Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science. The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor. We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today! Pay Transparency: The expected pre-tax pay for this position is $45,000.00 - $72,450.00 Actual pay may differ depending on relevant factors such as prior experience and geographic location. EEO Statement: We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at _and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. For more information about equal employment opportunity protections, please view the Know Your Rights _. Privacy Policy: We will use the personal information that you have submitted to us in order to consider your application for the relevant role. Your privacy is important to us. Please _ for our Privacy Policy which explains the purposes for which we will use your personal information and the ways in which we will handle and retain your information. It also explains the rights you have in relation to your information, and how to contact us with any queries or requests. 3rd Party Non-Solicitation Policy: By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation. Avantor offers a comprehensive benefits package including medical, dental, and vision coverage, wellness programs, health savings and flexible spending accounts, a 401(k) plan with company match, and an employee stock purchase program. Employees also receive 11 paid holidays, accrue 18 PTO days annually, are eligible for volunteer time off and 6 weeks of 100% paid parental leave (except in states that offer paid family leave). These benefits may not apply to employees covered by a collective bargaining agreement or those subject to other eligibility rules.

Summary \n The Cannabis Machine Operator for Bud's Goods of New Jersey is responsible planning, operating, and maintaining equipment at our facility in Linden, New Jersey. The primary operations of the facility will be the packaging of cannabis and cannabis products as a service to clients of the company. The Cannabis Machine Operator is responsible for leading and organizing a team of packaging techs in support of day-to-day machine operations. \n\n The Cannabis Machine Operator must be able to operate and oversee specialized automated cannabis packaging equipment and to keep the equipment clean and running efficiently at all times. This role's success relies heavily on the successful operation of the facility's automated cannabis packaging equipment; therefore an understanding of mechanical and electrical systems is required. \n\n The Cannabis Machine Operator's goal is for total client satisfaction and works hard to always adhere to Bud's Goods' high standards for quality and service to our clients and the terms of our client agreements. This role is responsible for the sanitation and proper batch change procedures to avoid potential contamination ensure our clients are provided safe and controlled products. \n\n The Cannabis Machine Operator reports to the Packaging Manager and works closely with the Vault Manager. This role reports to Linden, New Jersey, Monday through Friday, 6:30am to 3:00pm. 32-40 hours per week. \n Job Duties \n\n • Responsible for pre-shift assessment in conjunction with the Packaging Manager to assess work already completed and what work will be designated to run for the day.\n, • Responsible for determining the work flow sequence to minimize changeovers. \n, • Stages product work flow so it is ready for processing after pre-shift briefing to techs.\n, • Provide leadership, direction, and supports Packaging Tech(s) assigned to their operating line for all operating activities including production runs, startups, changeovers and shutdowns. \n, • Direct assembly or disassembly, and cleaning as required for shift start and end operations.\n, • Work closely with Labeling Tech and Packaging Manager to prepare labeled containers (pouches, tubes, jars etc) in advance of production runs so that labeled product is not the bottleneck to production capabilities.\n, • Conduct beginning and end of shift quality checks to verify the exiting product matches finished product specs. Quality checks may include weight verification, seal integrity, legibility etc.\n, • Validate Product through every change of Metrc tag. Bagged product matches labor sheets and recipient bins so as to not mix products. Operator ensures finished product is adequately labeled and isolated to prevent mixed product.\n, • Responsible for capturing operational data required on a labor sheet including hours, waste, residual product for handpack / shake and any non-cannabis waste. \n, • Troubleshoot mechanical issues as they arise and attempt to resolve them before escalating to maintenance for intervention. \n, • Assess machine operation and provide suggestions for improvements to safety and efficiency where possible.\n, • As required interface and input operations data into Metrc, Distru, or other systems used by Buds to capture shift performance.\n, • Conform to machine specific LOTO requirements when performing services or specific cleaning activities that require LOTO.\n, • Ensure the packaging operations are in compliance with all local and state laws, as well as the Company's operational standards \n, • Serve as a leader and champion of Bud's values in the Packaging operations\n, • Learn and operate software used for the company's Manufacturing Execution Systems\n\n\n Skills & Attributes \n\n • Superior verbal and written communication and presentation skills with proficiency of grammar and the ability to adapt tone/style to a variety of audiences \n, • Strong organizational, critical thinking, presentation, and project management skills \n, • Ability to classify and triage issues and take appropriate action to resolve issues in self-sufficient manner \n, • Exceptional interpersonal and relationship building skills \n, • Advanced math and reading comprehension \n, • Strong business acumen with exceptional attention to detail, high stress tolerance, and exemplary emotional intelligence \n, • Ability to provide clear, timely, and coordinated directives, catering communication styles to different levels of the workforce \n, • Understands and thrives in fast-paced, KPI-driven production environments \n, • Team player willing to assist in any function of packaging and labeling \n, • Ability to prioritize the business in all decision making \n\n\n Education & Experience \n\n • HS Diploma or 2+ years of related field experience\n, • 1+ years of experience in a leadership role\n, • 2+ years of production or manufacturing experience, preferably with 1+ years in cannabis industry \n, • Must have a solid understanding of the cannabis laws, rules and regulations and passion to further understanding and knowledge of the industry, regulations, market trends and competition \n, • Experience working with various complex manufacturing machines or electrical systems\n, • Proven track record of managing the scope of operations in a complex and highly regulated business environment \n, • Cannabis product knowledge strongly preferred \n, • Working knowledge of Metrc preferred\n\n\n Working Conditions/Physical Demands: \n\n • Able to stand or sit for extended periods of time. \n, • Able to lift up to 50 pounds\n, • Able to work a fully flexible schedule including nights and weekends if necessary\n, • Extensive use of hands, including repetitive movements\n\n Additional Requirements: \n\n • Must pass all required background checks\n, • Must have a reliable vehicle\n, • Must be and remain compliant with all legal or company regulations for working in the industry\n, • Must possess valid driver's license \n, • Must be a minimum of 21 years of age\n, • Must be approved by Cannabis Regulatory Commission to work in cannabis industry\n\n Benefits: \n We offer a competitive benefits package designed to support our employees' health and financial well-being. Full-time team members are eligible for medical, dental, and vision insurance, as well as participation in our Operator Incentive Plan, which rewards strong performance and operational excellence. \n #ENGHP

Lantheus (NASDAQ: LNTH) is the leading radiopharmaceutical-focused company, delivering life-changing science to enable clinicians to Find, Fight and Follow disease to deliver better patient outcomes. Headquartered in Massachusetts with offices in New Jersey, Canada, Germany, Sweden, Switzerland and United Kingdom, Lantheus has been providing radiopharmaceutical solutions for nearly 70 years. Today, we're expanding our portfolio and pipeline across oncology, neurology and cardiology. Through recent acquisitions, along with strategic partnerships across the life sciences ecosystem, we are accelerating our efforts to advance precision medicine and improve patient outcomes around the world. At Lantheus we are purpose-driven, and every employee plays a vital role in our success. We're dedicated to cultivating a high-growth, forward-thinking culture where innovation thrives and diverse perspectives drive meaningful progress. Join us and be part of a company where your contributions make a real impact, because we know someone's health is in our hands. Summary of role As a key member of the Lantheus Springfield manufacturing site senior leadership team, the Radiation Safety Officer (RSO) Associate Director provides Environmental, Health, and Safety and Radiation Safety leadership across radiopharmaceutical manufacturing (e.g., RLT, PET and isotope products). The RSO Associate Director provides visible leadership to foster a proactive safety culture, ensures compliance with applicable EHS (e.g., EPA, OSHA, DOT, and New Jersey Department of Environmental Protection (NJDEP)) and radiation (e.g., Nuclear Regulatory Commission (NRC) and New Jersey Radiation Protection Code) regulations and Lantheus' standards. The RSO Associate Director drives the prevention of injuries/illnesses and environmental releases and oversees the radiation safety program and licensed radioactive material activities in accordance with the site RAM License. This role also has the responsibility to oversee the licensing of Lantheus products for distribution in every state throughout the United States of America. This includes the applicable pharmaceutical manufacturing, warehousing, and distribution licensing required by each individual state regulatory body. This position is based in Springfield, New Jersey and requires a presence on-site 5 days per week, and open to applicants authorized to work for any employer within the United States. Responsibilities • Provide day-to-day EHS and Radiation Safety technical leadership for the Evergreen site ensuring environmental, health, safety, and radiation compliance with the applicable federal and state regulations. Measure, analyze, and improve performance to meet business objectives. Establish and govern key metrics (e.g., OSHA injury rate, near misses, safety observations, and EM performance) and use leading indicators to anticipate and mitigate risks to employee health and safety., • Develop and maintain deep technical expertise in radiopharmaceutical manufacturing (RLT, PET and isotope products), including radioactive material handling and controls, radiochemistry/radiosynthesis, automated synthesis platforms, in-process controls, and analytical/quality procedures. Ensure technical knowledge is translated into robust procedures, training, and standardized ways of working to prevent health and safety risks and radiation exposure., • Create and continuously improve the site EHS management system and compliance programs, including written programs, procedures, inspections, and governance routines that drive consistent execution., • Develop, implement, and maintain site safety and environmental procedures and training (e.g., hazard communication, chemical hygiene, LOTO, confined space, hot work, PPE, waste handling, spill response) and verify effectiveness through audits and field observations., • Own EHS recordkeeping and reporting, including OSHA 300/300A, incident/near-miss documentation, environmental monitoring records, waste manifests, and other required logs; analyze trends and communicate performance to site leadership., • Lead incident management for safety and environmental events, including immediate response/notification, investigation, root cause analysis, corrective and preventive actions (CAPA), and effectiveness checks., • Partner with Manufacturing, Engineering, and Facilities to implement safe work controls for routine and non-routine work, including contractor EHS oversight, pre-job risk reviews, permits (hot work/confined space), lockout/tagout, and job hazard analyses., • Own site environmental compliance programs as applicable (e.g., air, wastewater/stormwater, hazardous waste, SPCC), including permit conditions, routine inspections, sampling/monitoring, submissions, and coordination with EPA, NJDEP, and other agencies., • Manage chemical and waste stewardship, including hazardous waste accumulation areas, vendor oversight, manifesting, storage compatibility, spill prevention/response readiness, and periodic drills as required., • Drive EHS engagement and capability building through onboarding and annual refresher training, safety communications, and coaching for leaders and employees; lead safety committees and routine site safety walks., • Serve as key EHS and Radiation technical representative during regulatory interactions and inspections (e.g., EPA, OSHA, NRC, NJDEP and other agencies). Ensure sustained inspection readiness, effective responses to information requests, and timely completion of associated commitments. Maintain an understanding of, and up-to-date copies of:, • NRC and NJ DEP regulations., • The RAM License., • Current versions of procedures related to radiation safety., • Ensure that radioactive material at the Springfield facility is limited to the types and quantities of the materials listed on the RAM License. Amend the RAM License whenever there are changes in licensed activities, responsible individuals, or information commitments provided to NJ DEP during the licensing process. Provide necessary information on all aspects of radiation protection to personnel at all levels of responsibility, according to the conditions of the license. Maintain physical security of RAM. Post documents as required by New Jersey Administrative Code (NJAC) 7:28. Implement control measures that limit radiation exposures As Low as is Reasonably Achievable (ALARA)., • Oversee proper delivery, receipt, use, and performance of radiation surveys for all shipments of radioactive material arriving at or leaving from the facility, as well as accurate packaging and labeling of all radioactive material leaving the facility. This includes monitoring and surveys of all areas in which radioactive material is possessed and used. Maintain any required records related to the safe use and transport of radioactive material, including, but not limited to:, • Shipping documentation., • Survey and wipe test results., • Personnel monitoring records., • Effluent monitoring records., • Instrument calibration reports., • Incident reports., • Radiation safety program audit reports., • Distribute and process personnel radiation-monitoring equipment, determine the need for and evaluate bioassays, monitor personnel radiation exposure and bioassay records for trends and high exposure, notify individuals and their supervisors of radiation exposures approaching established limits, and recommend appropriate remedial action. Install, monitor, and replace facility or area dosimetry to appropriately manage and monitor radiation levels throughout the facility. Immediately terminate any unsafe condition or activity that is found to be a threat to employee or public health and safety or property. Supervise decontamination and recovery operations., • Develop, implement, maintain, and distribute, as appropriate, up-to-date operating, emergency and security procedures. Conduct training programs and otherwise instruct all personnel in the proper procedures for handling radioactive material prior to possession and/or use, both at periodic intervals (refresher training), and as required by changes in procedures, equipment, and regulations., • Supervise and coordinate the radioactive waste disposal program, including effluent monitoring and recordkeeping of waste storage and disposal. Oversee the storage of radioactive material not in current use, including waste. Perform or arrange for leak tests on all sealed sources and calibration of radiation survey instruments., • Hold periodic meetings and provide reports to management as needed to ensure appropriate administration of the radiation safety program., • Perform periodic audits of the radiation safety program to ensure compliance with:, • All applicable NRC and NJ DEP regulations, • The terms and conditions of the RAM License, • The content and implementation of the program to achieve occupational doses and doses to members of the public that are ALARA., • The requirement that all records be properly maintained. Ensure that the results of audits, identified deficiencies, and recommendations for change are documented, provided to management for review, and ensure that prompt action is taken to correct deficiencies. Communicate audit results and corrective actions to all personnel who possess/use radioactive material. • Ensure that all incidents, accidents, and personnel exposure to radiation in excess of ALARA or established limits are investigated and reported to the NJ DEP and other appropriate authorities as required and within the required time limits., • Coordinate the PDMA application process for all Lantheus products distributed in the United States. Maintain state licensure to enable the distribution and sale of all Lantheus products in all 50 states. Basic Qualifications • BA in a scientific discipline/AAS with a minimum of eight (8) years' health physics and related EH&S experience, with a minimum of two (2) years' experience as a Radiation Safety Officer highly preferred., • Demonstrated working knowledge of applicable radiation safety regulations and guidance (e.g., NRC and New Jersey Radiation Protection Code), license conditions, and ALARA principles., • Experience with radiation monitoring and contamination control practices, including performing/overseeing surveys, wipe tests, personnel monitoring/ dosimetry, and maintaining required records., • Ability to lead response to radiological incidents/events, conduct investigations, implement corrective actions, and support required notifications and reporting to regulatory agencies within required timeframes., • Must be able to meet the RSO qualification requirements specified by the site Radioactive Materials License and applicable regulatory agencies (or obtain qualification within an agreed-upon timeframe)., • Experience with hazardous/regulated waste and chemical management, including accumulation area requirements, waste characterization, vendor coordination, manifesting, and internal training/communication., • Ability to lead or support environmental inspections and audits (internal and regulatory), identify gaps, and drive corrective and preventive actions (CAPA) to closure. Preferred Qualifications • Previous experience as a Radiation Safety Officer., • Strong communication and training capability, including developing and delivering radiation safety training and partnering effectively with Manufacturing, Quality, Engineering, and Facilities., • Experience supporting and maintaining environmental permits and compliance obligations (as applicable), including routine inspections, sampling/monitoring, recordkeeping, agency correspondence, and timely submittals., • Working knowledge of key environmental regulatory programs applicable to a manufacturing site (e.g., EPA and NJDEP requirements related to hazardous waste/RCRA, air, wastewater/stormwater, chemical storage and spill prevention (SPCC), and emergency planning/right-to-know)., • Demonstrated capability to respond to and investigate environmental incidents/spills, coordinate containment/cleanup, complete required notifications, and implement sustainable corrective actions., • Proven ability to influence and partner cross-functionally to integrate environmental requirements into operations and projects, communicate expectations clearly, and coach leaders and employees on compliant practices. Core Values The ideal candidate will embody Lantheus core values: • Let people be their best, • Respect one another and act as one, • Learn, adapt, and win, • Know someone's health is in our hands, • Own the solution and make it happen The pay range for this position is between $139,000 and $232,000 annually. Actual base pay offered may vary depending on a number of factors such as job-related knowledge, skills and experience. Employees in this position are eligible for a discretionary performance-based cash incentive, and depending on the level of the role may be eligible for a discretionary annual equity award. Benefits for this position include a comprehensive health benefits package that includes medical, prescription drug, dental, and vision coverage. Other offerings include life and disability benefits, pre-tax accounts, a 401(k) with company contribution, and a variety of other benefits. In addition, employees are eligible for a generous time off package including paid vacation, holidays, sick days, and paid parental leave. Interested candidates can apply at Lantheus.com. Applications for this position will be accepted until June 12, 2026. Lantheus is committed to equal employment opportunity and non-discrimination for all employees and qualified applicants without regard to a person's actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth, related medical conditions and lactation), gender identity or gender expression, sexual orientation, marital status, military service and veteran status, disability, protected medical condition as defined by applicable state or local law, genetic information, or any characteristic protected under applicable federal, state, or local laws and ordinances. Any applicant requiring an accommodation in connection with the hiring process and/or to perform the essential functions of the position for which the applicant has applied should make a request to the Lantheus Talent Acquisition team at _. Lantheus is an E-Verify Employer. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job Description Employment Type Part-Time/Full-Time We are a family owned garbage business located in South Plainfield, New Jersey. We are seeking a Customer Service Representative to join our team! You will be responsible for helping customers by providing product and service information and resolving technical issues. Part-Time 8:00am to 2:30pm. Full-Time 8:00am to 4:00pm. Monday through Friday Responsibilities: • Answer calls and handle customer inquiries and complaints, • Provide information about the products and services, • Troubleshoot and resolve product issues and concerns, • Assisting Customers with Accounts, • Taking Payments on Customer's Accounts, • Document and update customer records based on interactions, • Develop and maintain a knowledge base of the evolving products and services, • Assisting Billing with Preparation of Monthly Bills Qualifications: • Previous experience in customer service, sales, or other related fields, • Ability to build rapport with clients, • Ability to prioritize and multitask, • Positive and professional demeanor, • Excellent written and verbal communication skills Compensation Range: • $ 15.00 to $ 16.00 HourlyCompany DescriptionPinto Brothers Disposal is a family owned and operated solid waste company established in 1980. We are a Central Jersey company that has been servicing Middlesex and Somerset Counties for over 40 years. We pride ourselves of giving all our customers dependable and professional disposal service. We serve and interact with homeowners, business, corporations, townships, Boards of Education, and management companies to help with their garbage and recycling needs.Pinto Brothers Disposal is a family owned and operated solid waste company established in 1980. We are a Central Jersey company that has been servicing Middlesex and Somerset Counties for over 40 years. We pride ourselves of giving all our customers dependable and professional disposal service. We serve and interact with homeowners, business, corporations, townships, Boards of Education, and management companies to help with their garbage and recycling needs.

Job Description About JCMLiving Get to know our company and grow your career with employment at a JCMLiving community. Enjoy our comprehensive financial and benefit packages as well as the support of an experienced and dedicated management team. Our comprehensive benefit package assists our employees to live their best life and grow both personally and professionally. Join our team of passionate and dedicated professionals for a career that will satisfy and enrich your life. JCMLiving is an equal opportunity employer with opportunities in NJ, PA & MD. Please check out our properties and events online at: https://jcmliving.com The Position Maintenance Technician - Looking for a hard-working and knowledgeable technician to assist us to keep our apartments and community looking beautiful and functioning efficiently. The right candidate should have a working knowledge of electric, plumbing, drywall, flooring, appliances, windows and locks. We offer great working conditions and hours and excellent wages - paid vacation and sick time 16-25 PAID holidays per year! Some responsibilities: • Complete maintenance requests within apartment community, • Lifting of appliances, tile work, drywall work, appliance repair and installation, HVAC repairs, • Snow removal, • Perform and work together with contractors and all employees, • Carpentry, plumbing, light electrical, painting, refurbishing, cleaning, waste removal, heat and air-conditioning repair, masonry, grounds keeping, landscaping and sewer maintenance, • Carry out preventative maintenance program under the direction or Maintenance Supervisor, • Be available for emergency repairs and after-hour "on call" duty as required, • Must be capable of driving all company vehicles with valid driver's license (i.e. golf carts, quads and trucks), • Capable of using all maintenance tolls, • Carrying out all maintenance duties safely that are required for this position Benefits of Employment with JCMLiving • Competitive salary, • Medical coverage, • Dental coverage, • Vision coverage, • 401K, • Life insurance, • Paid sick, holiday, and vacation time, • Free access to pools, fitness centers, pet spas, etc. Candidates, please submit their resume and salary requirements for consideration. All candidates have a drug and background check run on their applications before hire. https://jcmliving.com EQUAL OPPORTUNITY EMPLOYER & EQUAL HOUSING PROVIDER

Job Description • We are hiring immediately for full time FOOD SERVICE UTILITY positions., • Location: Kean University - 1000 Morris Avenue, Union, NJ 07083. Note: online applications accepted only., • Schedule: Full time schedule; Sunday through Thursday, 8:00 am to 4:00 pm. More details upon interview., • Requirement: Prior sanitation, dishwashing, and waste management experience is required., • Pay Range: $16.50 per hour to $18.00 per hour. *Internal Employee Referral Bonus Available The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg At Gourmet Dining & Chartwells Higher Education, people are at the core of our business. Together we build innovative food service concepts and serve fresh, local and nutritious meals at over 270 college campuses across the country. Twice named the Fastest Growing Brand by Nation’s Restaurant News, at Gourmet Dining & Chartwells we take pride in creating opportunities for associates to grow their careers and achieve their development goals within the company. Job Summary Summary: Maintains kitchen work areas, and keeps equipment and utensils clean and orderly. Essential Duties and Responsibilities: • Sweeps and mops floors to comply with safety and sanitation standards., • Washes worktables, walls, refrigerators, meat blocks and other food prep surfaces., • Removes trash and places it into designated containers. Steam cleans or hoses out garbage cans., • Transfers supplies and equipment between storage and work areas., • Assists with banquet table and front of the house set up., • Assist with loading or unloading and delivering supplies and product., • Distributes supplies, utensils and portable equipment as needed., • Complies with outlined sanitation and safety requirements., • Performs other duties as assigned. The Benefits We are always looking for ways to invest in our people both inside and outside of work to help them achieve their full potential. Full-time and part-time positions offer: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyGourmetDining.pdf Our Commitment to Diversity and Inclusion Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Gourmet Dining maintains a drug-free workplace. Gourmet

Job Description Overview We create communities where employees thrive in their work, helping our residents thrive in their homes. Atria Senior Living’s family of brands has openings for individuals looking for a career with outstanding benefits, including: • Paid holidays and PTO, • Employees may receive annual anniversary rewards dependent on classification, starting at $500 for Full Time employees, • Employees may be eligible to receive an Annual Scores Reward of $500 (Full Time) or $250 (Part Time) based on community survey results, • Benefits package also includes Health, Dental, Vision, and Life Insurance, • Retirement Savings Plan / 401(k) employer match, • Tuition reimbursement (U.S Based Communities) *Enrollment in benefits varies by employee classification; anniversary reward amounts vary by location As a valued team member at Atria, you’ll work in a supportive environment that provides advancement opportunities and promotes a healthy work-life balance. Apply now! Responsibilities • Diagnose and repair problems in such areas as HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.) and waste management systems., • Complete assigned service requests and repairs consistent with company operating and equipment/supply standards and in a safe and timely manner., • Perform turn-key work as required to ensure vacant apartment homes are rent-ready in a timely manner., • Maintain customer service standards. Respond to resident requests and work with residents to minimize/resolve problems and complaints. Follow-through to ensure issue is resolved., • Apply all applicable Atria Policies and Procedures such as, but not limited to, company operating and safety standards. Promote safe work practices among on-site staff., • Ensure compliance with all federal, state and local laws, specifically Fair Housing regulations, building codes and environmental laws and regulations., • Assist with organizing and prioritizing service requests and general maintenance tasks., • May drive company vehicle from community to social and other various destinations (only if required by community)., • May supervise the work of other associates and outside contractors., • May perform other duties as assigned. Qualifications • High School diploma or equivalent (GED) preferred., • 1 year experience in property management maintenance performing the duties associated with a Maintenance Technician., • Able to perform basic arithmetic skills such as measurement, addition, subtraction, multiplication and division in order to do basic calculations and analysis such as estimating, determining averages and percentages, and totals., • Able to occasionally operate general office equipment such as, but not limited to, personal computer, telephone, photocopying machine, facsimile machine and postage machine., • Able to frequently use general maintenance tools, supplies and equipment such as, but not limited to, hand tools, pressure washers, blowers, paint equipment, pool chemicals, ice removal equipment, ladders, landscaping equipment, sanders and safety equipment., • Able to frequently handle and use chemicals and general cleaning supplies., • Position requires driving responsibilities (may use Company provided vehicle and/or personal vehicle)., • Must possess valid driver’s license., • Must satisfactorily meet and be in compliance with Atria motor vehicle policy standards.

Rover pet sitters and dog walkers provide pet care services such as dog walking, drop-in visits, feeding pets, refilling water, cleaning litter boxes, picking up waste, providing companionship, and overnight pet sitting when requested. Workers communicate with pet owners by sending updates and photo

Secure new business by selling Regulated Medical Waste, and Compliance service solutions. Responsible for growing revenue and profitability in assigned geographic area by selling Regulated Medical Waste and Compliance Services (OSHA/HIPAA) services, while meeting or exceeding established annual goal

Waste Connections has an immediate opening for a Collections Representative based in Iselin, NJ. Proficiency in Microsoft Office (Word, Excel, Outlook) and collections software.

EEO statement: Republic services is an equal opportunity employer. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services. Republic services charitable foundation and local community grants.

The Sales Executive, a member of Shred-its sales team, is responsible for the direct sales of Shred-its services to potential and existing customers within an assigned territory. The Sales Executive is responsible for all aspects of sales, pipeline building, qualifying target opportunities, managing

Clean Harbors in South Plainfield, NJ is seeking an Environmental Field Laborer to join our safety conscious team.This role will be active in the field responsible for the performance of tasks associated with hazardous waste clean-up, site-remediation, equipment decontamination and handling of hazar

As a Field Technician at Lewis Environmental, you will play a critical role in delivering high-quality service across our four primary service lines: Remediation, Waste Transportation, Industrial Maintenance, and Emergency Response.This position offers you the opportunity to work in a dynamic enviro

Location: Edison, NJ, US, 08817 Req ID: 90276 Facility: Edison-Lyo Department: Production/Logistics Division: Olefins and Polyolefins, Refining LyondellBasell is a leader in the global chemical industry creating solutions for everyday sustainable living. With a nearly 70-year legacy that includes a Nobel Prize in Chemistry and our proprietary MoReTec recycling technology, LYB is enabling a more sustainable future for generations to come. LYB develops high-quality and innovative products for applications ranging from sustainable transportation and food safety to clean water and quality healthcare. LYB places high priority on diversity, equity and inclusion and is Advancing Good with an emphasis on our planet, the communities where we operate and our future workforce. We're addressing the global challenges of ending plastic waste, taking climate action, and supporting a thriving society, while generating value for our customers, investors, and society. The anticipated salary range for this position is $34.15 an hour. The selected candidate's compensation will be determined based on their skills, experience, and qualifications.

ABM Industries - - Responsibilities: Perform routine cleaning tasks including sweeping, mopping, vacuuming, dusting, and polishing floors and surfaces; Clean and sanitize restrooms, replenish supplies, and ensure hygiene standards are met; Empty trash and recycling bins and waste in accordance with

Job Description Overview We create communities where employees thrive in their work, helping our residents thrive in their homes. Atria Senior Living’s family of brands has openings for individuals looking for a career with outstanding benefits, including: • Paid holidays and PTO, • Employees may receive annual anniversary rewards dependent on classification, starting at $500 for Full Time employees, • Employees may be eligible to receive an Annual Scores Reward of $500 (Full Time) or $250 (Part Time) based on community survey results, • Benefits package also includes Health, Dental, Vision, and Life Insurance, • Retirement Savings Plan / 401(k) employer match, • Tuition reimbursement (U.S Based Communities) *Enrollment in benefits varies by employee classification; anniversary reward amounts vary by location As a valued team member at Atria, you’ll work in a supportive environment that provides advancement opportunities and promotes a healthy work-life balance. Apply now! Responsibilities Laundry Attendant Services • Performs all laundry duties including:, • washing, drying, and ironing resident laundry and community linens and textiles in provided appliances, • folding and/or hanging laundry appropriately, • distributing laundered articles and linens, • replacing and hanging draperies, • changing beds, • mopping laundry room floor and washing walls regularly, • washing windows around the community as requested, • Ensures resident’s laundry is kept separated and is not mixed with other residents., • Keeps laundry area maintained in a safe, clean and good working condition., • Disinfects and sterilizes equipment and supplies., • Stocks laundry and cleaning cart with supplies., • Empties wastebaskets, and transports trash and waste to disposal area., • May perform other duties as assigned. Qualifications • Must successfully complete all Atria specified training programs., • Able to read a limited number of two- and three-syllable words and to recognize similarities and differences between words and between series of numbers., • Able to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Able to perform these operations using units of United States currency and weight measurement, volume, and distance., • Able to apply common sense understanding to carry out simple one- or two-step instructions. Able to deal with standardized situations with only occasional or no variables., • Able to work various schedules and shifts as needed., • Able to safely perform duties using related commercial laundry equipment and materials such as washers, dryers, irons, etc.

Job Description Position Overview: The Houseperson provides support between laundry, guest-room, and maintain public area for cleanliness, and appearance. This position transports clean/dirty linen and supplies, disposes of trash, cleans all hard/textile surfaces and restrooms within public space, responds to guest room requests. Essential Duties & Responsibilities: • Willingness to accept the most effective role, • Restock inventory of stockrooms, as needed, • Supports Room Attendants in stripping soiled linens, towels, and removing trash from guest-rooms, • Collects soiled linen from vacant/dirty guest-rooms and transports to laundry room, • Distributes clean bath and bed linen from laundry to storerooms, • Delivers items to guest-rooms upon request by guest, • Picks up and returns to storage any previously used guest request items found in guestrooms or corridors (i.e. crib, rollaway), • Cleans guest rooms and guest areas; including but not limited to – making beds, dusting, vacuuming, cleaning bathrooms, cleaning windows and mirrors, and replacing supplies, • Communicates with Supervisor for any special duties, or requests, • Maintains a safe, secure, and healthy work environment by following standards and procedures; complying with security regulations, • Follows procedures concerning protection against blood borne pathogens, • Utilizes chemicals according to directions and familiarizes self with all MSDS, • Other duties as specified by the Housekeeping Supervisor on an "as need" basis If there is no Public Space person in the hotel, House Person is also responsible for the following: • Maintains and cleans public areas and public restrooms, • Ensures internal windows and doorways are free of fingerprints and smudges, • Ensures that furniture and hard surfaces of public space are clean and organized, • Public space floors are free of debris, • Reports any carpet spots/spills to supervisor, • Empties all waste receptacles in public spaces Qualifications: • Familiar with Housekeeping; including sanitation, laundry operation, and guest service, • Lift up to thirty (30) pounds, unassisted, • Bending, stretching, standing, walking and use of stairs for duration of shift, • Exposure to chemicals

Job DescriptionDescription: Who is Harmony Health Group Harmony Health Group was founded in 2015 with the mission of providing a safe, supportive, and therapeutic environment for individuals struggling with substance use disorders. Our first facility offered a flexible continuum of care designed to help clients navigate each step of their recovery journey. Since then, we’ve continued to grow and broaden our services to include co-occurring and primary mental health treatment, allowing us to better meet the needs of the communities we serve. We remain committed to expanding access to high-quality, evidence-based behavioral health care; delivered by a team of dedicated professionals who are passionate about making a difference. Why Harmony Health Group: · Comprehensive benefits package, including medical, dental, vision, and life insurance · Robust training program with clear pathways for professional growth and advancement · Flexible scheduling options, with 1st, 2nd, and 3rd shifts available · Full-time and part-time positions to match your ideal work–life balance · Meaningful, rewarding work where you play a key role in supporting clients on their recovery journeys You’ll be rewarded and recognized for your performance in an environment that will challenge you and give you clear direction on what it takes to succeed in your role as well as provide development for other roles you may be interested in. Job Title: Housekeeper Department: Operations Reports to: Program Manager About the role: The housekeeper is to maintain a sterile environment in and around such facility. Must be able to maintain cleanliness and a germ-free environment in facilities that are constantly exposed to the spread of germs and diseases. As a Housekeeper with Harmony, you will: • Clean floors and surfaces using predefined cleaning methods and procedures, • Mix appropriate quantities of cleaning liquids and chemicals in accordance with state safety regulations, • Dust, mop and sweep rooms and administrative offices, • Clean and disinfect public restrooms, • Clean mirrors and windows along with polishing fittings and fixtures, • Empty trash receptacles and ensure proper compaction of surgical waste according to policies, • Create and maintain an inventory of cleaning supplies and equipment, • Inform Operations Director of any cleaning equipment that may need repair or replacement, • Inform Operations Director about any building hazard and assist in addressing it, • Maintain adequate stock of cleaning supplies, • Perform related work as required or as assigned by Supervisor Requirements: You will be successful in this role if you: • Good communication skills, • Physically dexterous, • Attention to detail, • Multitasking, • Ability to take and follow instructions, • Customer service, • Ability to work without supervision, • Teamwork Key skills we hope you have: • Minimum of high school diploma, • Working within a Mental and Substance abuse facility is preferred., • Ability to travel between HRG facilities Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 50 pounds. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk and sit. The employee is occasionally required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. Working Conditions and Environment: • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • The noise level in the work environment is usually moderate., • Position is required to work in indoor and outdoor environments as needed. Potential exposure to aggressive situations., • Potential exposure to airborne/bloodborne pathogens and other potentially infectious diseases

This role will be active in the field responsible for the performance of tasks associated with hazardous waste clean-up, site-remediation, equipment decontamination and handling of hazardous materials.United States, Canada, Mexico and Puerto Rico.Everywhere industry meets environment, Clean Harbors

Class B Vacuum Truck Route Driver. Safety-Kleen in Linden, NJ is seeking a Class B Vacuum Truck Route Driver (Vacuum Sales and Service Representative) to manage a route and operate a Vacuum Truck to pick up industrial waste from customers such as automotive repair shops and quick oil change business

The driver position may be required to repeatedly lift up to 50 pounds, & move & maneuver up to 100 pounds, as well as mount & dismount the truck multiple times every route. Interstate Waste Services Is Now Hiring CDL B Side Load Truck Drivers. Drivers are responsible for safely operating front, sid

The Driver Helper rides on the vehicle and assists a Driver in providing prompt, courteous and complete waste removal services for customers who reside on a designated residential route. The Driver Helper is responsible for safely loading waste, as well as carrying bags and containers to the vehicle

Drivers transport the material to a disposal, transfer or recycle facility, and may make one or more trips throughout the shift/liliDrivers transport the material to a disposal, transfer or recycling facility, may make one or more trips throughout the shift/liliWe deploy both manual automatic truc

Safety-Kleen in Linden, NJ is seeking a Sales and Service Route Driver Trainee (Driver Class B Trainee) . This role will train to drive a Class B box truck to provide onsite service for parts washer machines, pick up containerized hazardous waste, and sell products/services in a defined route. Safety-Kleen will pay for you to obtain your CDL. Safety-Kleen, a subsidiary of Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology - come be part of the solution with us. Why work for Clean Harbors? Health and Safety is our #1 priority and we live it 3-6-5! Focus on maintaining sustainability and cleaning the Earth Recruiting Pay range: $27.00 per hour Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match Own part of the company with our Employee Stock Purchase Plan Opportunities for growth and development for all the stages of your career Company paid training and tuition reimbursement Key Responsibilities: Ensure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner May visit 10-12 customer sites per day Switch out 15- & 30-gallon drums of solutions Service parts washer machines and clean out sediment from sinks Up-sell at customer locations and generate new leads in the field Service automotive repair, fleets, and manufacturing type businesses Complete daily scheduled services, deliveries, and pick-ups in a timely manner Follow all local, state (provincial) and federal compliance regulations and rules Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements Observe all company environmental health and safety operating guidelines Performs other duties as assigned Required Qualifications: Class B CDL Obtain Hazmat and Tanker endorsement within 90 days of employment Basic computer and math skills Good written and verbal communication skills Strong customer service skills Perform physical functions per job requirements Successfully complete a background check, drug test, and physical, by position Per OSHA's Respiratory Protection standard, 29 CFR 1910.134, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications: Strong customer service skills Commercial route driving experience (Class C or Non-CDL) Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact ect@cleanharbors.com or 1-844-922-5547. Clean Harbors is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *CH

Job Description Why do you want to work at Quality Carriers, QRS Shops? We offer competitive wages and employee benefits including the following amazing benefits to our employees: • Weekly Competitive Pay - Pay is $ 25 - $27 /hour depending on experience and location, • Tool/Boot Reimbursement Program, • Referral Program, • Employee benefits: Discounted premiums for Medical, Dental and Vision plans, Flexible Spending Accounts, • Generous Paid Time Off/ Holiday Schedule, • Matching employer 401K Mechanic Duties/Responsibilities: • Diagnose and repair tractors and trailers. Perform annual/systematic 90 day inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards., • Operate a yard hostler truck to move trailers within the facility yard and the shop as needed., • Able to identify parts and supplies as needed., • Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste., • Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety, • Using welding equipment, • Perform miscellaneous duties as assigned. Mechanic Required Skills/Abilities: • Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems., • Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures., • Must be able to work a 11am-7pm schedule Preferred Qualifications • High school diploma, completion of G.E.D., or equivalent vocational school preferred, but not required., • Dynamic, ambitious and engaged team player. Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity.

Job DescriptionDescription: We are actively seeking a highly skilled Mechanical Designer with a specialization in deep drawn metal stamping to join our innovative engineering team. This position requires a detail-oriented engineer with a comprehensive understanding of product design and advanced manufacturing processes, specifically in high-precision metal forming techniques. Requirements: Key Responsibilities: Design, develop, and optimize tooling and fixtures for deep drawn metal stamping processes. Ensure these designs facilitate maximum productivity, efficiency, and quality throughout the manufacturing workflow. Work closely with multidisciplinary teams, including production, quality assurance, research and development, and supply chain management, to develop creative and practical solutions to complex manufacturing challenges. Utilize advanced CAD software tools (such as SolidWorks, AutoCAD, or CATIA) to create detailed 2D and 3D models. Generate comprehensive engineering drawings conforming to industry standards to facilitate clear communication of design intent. Conduct thorough feasibility analyses and computer simulations to evaluate design concepts, optimize deep drawing processes, and anticipate potential manufacturing issues prior to production. Select appropriate materials and establish manufacturing processes and tolerances that align with design specifications, regulatory standards, and customer requirements, ensuring high-quality deliverables. Perform detailed root cause analysis on production anomalies and implement effective corrective actions, utilizing methodologies such as 5 Whys, Fishbone Diagrams, or Failure Mode and Effects Analysis (FMEA) to enhance process reliability. Oversee the prototyping phase, developing initial models for testing. Analyze test results rigorously and make iterative adjustments to designs based on empirical data and feedback from production teams to refine product performance. Actively participate in continuous improvement initiatives, employing Lean Manufacturing principles and Six Sigma methodologies to enhance process efficiencies, reduce waste, and lower production costs. Maintain meticulous documentation of design processes, modifications, and specifications. Ensure all design changes are accurately recorded and communicated to relevant stakeholders for future reference. Qualifications: · Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Materials Science, or a related engineering discipline. · Minimum of 5 years of experience in mechanical design and engineering within deep drawn metal stamping, ideally in high-volume manufacturing environments such as automotive, aerospace, or industrial machinery sectors. · Advanced proficiency in CAD software and familiarity with simulation tools for finite element analysis (FEA) and computational fluid dynamics (CFD). · Strong understanding of metallurgy, metal forming mechanics, and manufacturing processes, including deep drawing, stamping, and machining. · Exceptional problem-solving skills, with a systematic approach to troubleshooting and overcoming design and manufacturing challenges. · Excellent verbal and written communication skills, enabling clear dialogue with team members, suppliers, and customers to ensure alignment and project success. · Project Management Experience: Proven experience in project management, with the ability to lead and manage multiple design projects simultaneously from conception through to production. · Lean and Six Sigma Knowledge: Certification or demonstrable knowledge of Lean Manufacturing principles and Six Sigma methodologies to foster a culture of continuous improvement. Benefits: • Competitive salary with performance-linked bonuses., • Comprehensive health, dental, and vision benefits package., • 401(k) retirement plan with company matching contributions., • Opportunities for professional development and career advancement within a growing organization., • Flexible working environment that promotes work-life balance. Join us and become a crucial part of a forward-thinking team dedicated to crafting high-quality metal stamped products that not only meet industry standards but also exceed customer expectations through innovation, precision, and excellence in design. Work Environment: This position will primarily be based in an office/manufacturing plant setting, with occasional travel required to visit clients, attend industry events, and engage with production facilities. Application Process: Interested candidates should submit their resume along with a cover letter highlighting their relevant experience and qualifications to jmartinez@precisonxmfg.com

Job Description About JCMLiving Get to know our company and grow your career with employment at a JCMLiving community. Enjoy our comprehensive financial and benefit packages as well as the support of an experienced and dedicated management team. Our comprehensive benefit package assists our employees to live their best life and grow both personally and professionally. Join our team of passionate and dedicated professionals for a career that will satisfy and enrich your life. JCMLiving is an equal opportunity employer with opportunities in NJ, PA & MD. Please check out our properties and events online at: https://jcmliving.com The Position Maintenance Supervisor - Looking for a hard-working and knowledgeable Supervisor to manage a team of six in a large luxury apartment community. The right candidate should have a working knowledge of computers, as well as electric, plumbing, drywall, flooring, appliances, windows and locks and HVAC. We offer great working conditions and hours and excellent wages - paid vacation and sick time 16-25 PAID holidays per year! A apartment is available as part of compensation package. Some responsibilities: • Keep an orderly, stocked and organized shop, • Schedule vendors and contractors, • Make sure all service requests within apartment community are completed on a timely basis, • Must be able to lift appliances, tile work, drywall work, appliance repair and installation, HVAC repairs, • Snow removal, • Carpentry, plumbing, light electrical, painting, refurbishing, cleaning, waste removal, heat and air-conditioning repair, masonry, grounds keeping, landscaping and sewer maintenance, • Carry out preventative maintenance program under the direction or Maintenance Supervisor, • Be available for emergency repairs and after-hour "on call" duty as required, • Must be capable of driving all company vehicles with valid driver's license (i.e. golf carts, quads and trucks), • Capable of using all maintenance tools, • Carrying out all maintenance duties safely that are required for this position Benefits of Employment with JCMLiving • Competitive salary, • Medical coverage, • Dental coverage, • Vision coverage, • 401K, • Life insurance, • Paid sick, holiday, and vacation time, • Free access to pools, fitness centers, pet spas, etc. Candidates, please submit their resume and salary requirements for consideration. All candidates have a drug and background check run on their applications before hire. https://jcmliving.com EQUAL OPPORTUNITY EMPLOYER & EQUAL HOUSING PROVIDER

Job DescriptionDescription: We are actively seeking a dynamic and strategically-minded Director of Operations to oversee our deep drawn metal stamping manufacturing facilities. In this pivotal leadership role, you will be responsible for not only driving operational excellence but also developing comprehensive strategies to ensure the highest quality standards, optimize production processes, and significantly enhance operational efficiency across all manufacturing operations. Requirements: Key Responsibilities: · Develop and execute long-term operational strategies that align with company goals and promote sustainable growth within the deep drawn metal stamping sector. This includes analyzing market trends and competitor strategies to identify opportunities for expansion and innovation. · Lead the overall management of manufacturing operations, which encompasses production planning, quality control, supply chain management, and workforce development. Ensure efficient utilization of resources and materials to meet production goals effectively. · Establish and continuously monitor key performance indicators (KPIs) to evaluate production efficiency and product quality. Utilize advanced data analytics tools to make informed, data-driven decisions that enhance operational performance and drive improvements in production yields and quality compliance. · Collaborate with senior management and cross-functional teams to spearhead continuous improvement initiatives, such as implementing lean manufacturing practices, Six Sigma methodologies, and other process optimization strategies to streamline operations and reduce waste. · Ensure strict compliance with industry regulations, safety standards, and quality assurance protocols. Foster a culture of safety and accountability by conducting regular safety audits and promoting best practices. · Mentor and empower the leadership team within manufacturing, providing them with the tools and resources needed to take ownership of their departments. Facilitate leadership development programs and training to enhance team skills and foster career growth among employees. · Oversee the preparation and management of operational budgets, effectively allocating resources to maximize productivity while maintaining cost-effective operations. Regularly review financial performance and implement corrective actions as necessary. · Cultivate and maintain strong relationships with suppliers, customers, and industry stakeholders to enhance collaboration and drive innovation in product development. Engage with partners to negotiate contracts and terms that support operational goals. Qualifications: · Bachelor’s degree in Engineering, Manufacturing Management, or a related field; a Master’s degree is highly preferred. · A minimum of 7-10 years of progressively responsible experience in manufacturing operations, specifically in deep drawn metal stamping or a closely related field, with a strong understanding of the complexities involved. · Proven leadership abilities with a track record of creating and sustaining high-performing teams, driving operational improvements, and managing large-scale manufacturing projects. · In-depth knowledge of manufacturing processes, quality management systems, and lean manufacturing methodologies that drive operational efficiency. · Excellent analytical, problem-solving, and decision-making skills, coupled with the ability to navigate and resolve complex operational challenges in a fast-paced environment. Benefits Offered: · A competitive salary with performance-based incentives, recognizing your contributions to the company’s success. · A comprehensive benefits package, including health, dental, vision, and retirement plans that prioritize your well-being. · Opportunities for professional growth and advancement within a dynamic and innovative company that values employee engagement, creativity, and input. Work Environment: This position will primarily operate in an office setting, with regular visits to the manufacturing floor to supervise operations and ensure alignment with strategic goals. Occasional travel may be required for client meetings, industry events, and inter-company collaboration. Application Process: Interested candidates should submit their resume and a tailored cover letter detailing their relevant experience and qualifications to jmartinez@precisionxmfg.com. We look forward to reviewing your application and potentially welcoming you to our team!

Job Description Hi, we're Nuts.com! Nuts.com is a self-funded, profitable, rapidly growing multi-channel DTC specialty food and wellness company with over 550 people on our team. We're changing the landscape of snacking on nuts, dried fruit, chocolate and more! We planted our roots in Newark, New Jersey during the Great Depression, selling premium nuts on Mulberry Street's open-air market. We've come quite a long way since then, taking our multi-generational family business online in 1999. Even after 96 years, we continue to pride ourselves in expertly sourcing the highest quality foods and treating our customers like family. What's our team like? We're driven, collaborative and entrepreneurial. Energy and passion power our business and we look for candidates who share in that excitement to help us continue to build something special. The role: We are seeking a dedicated and experienced Sanitation Lead to join our team. The Sanitation Lead will oversee the daily activities of the Cleaning & Sanitation Associates, ensuring that all areas of our facility—including production areas, kitchens, restrooms, and common areas—are cleaned, sanitized, and maintained to the highest health and safety standards. This is a "working lead" role; the ideal candidate will possess strong leadership abilities to mentor staff but is also willing to perform physical sanitation tasks when necessary. You will play a critical role in maintaining compliance with OSHA, FSMA, and GMP standards. This role reports to the Sanitation Supervisor. How you'll make an impact Team Leadership & Scheduling: Lead a team of Cleaning & Sanitation Associates to ensure efficient cleaning operations. Develop and implement daily/weekly sanitation schedules to ensure full facility coverage. Training & Mentorship: Train sanitation staff on proper cleaning methods, chemical safety, and SOPs. Verify that staff are competent in operating equipment, including floor scrubbers, forklifts, and scissor lifts. Inspection & Auditing: regularly inspect and monitor cleaning procedures to ensure compliance with company standards and industry regulations. Conduct regular internal audits to identify areas for improvement. Inventory Management: Monitor inventory levels of cleaning supplies, PPE, and chemicals; order replacements as needed to prevent shortages. Equipment Maintenance: Ensure that all cleaning equipment (PIVs, scrubbers) is properly maintained, charged, and in good working order. Report mechanical issues to maintenance immediately. Safety & Compliance: Work closely with Quality Assurance and Health & Safety to ensure strict adherence to HACCP, allergen control, and GMP protocols. Ensure proper waste management and hazardous material disposal. Documentation: Maintain accurate records of cleaning logs, chemical usage, and staff training as required for regulatory inspections (FDA, SQF, etc.). Schedule Flexibility: Must be flexible to work different shifts. This position follows a four-day shift either day or overnight based on business needs. What you'll bring: • Required:, • 2+ years of sanitation experience in a manufacturing or food production setting., • Proven experience in a leadership role (Lead, Senior Associate, or Supervisor)., • Ability to walk and stand for extended periods., • Ability to lift up to 50 lbs., • Ability to climb stairs and ladders comfortably., • Ability to work in tight spaces and at varying heights (using scissor lifts or ladders)., • Education: High School Diploma or GED., • Experience:, • Industry Knowledge: Strong understanding of health and safety regulations, including OSHA, FSMA, HACCP, and GMPs., • Equipment Proficiency: Must be proficient in operating (and willing to train others on) Powered Industrial Vehicles (forklifts, scissor lifts, pallet jacks) and industrial floor scrubbers., • Physical Requirements:, • Key Skills: Strong attention to detail, ability to solve problems under pressure, and excellent organizational skills., • Highly Preferred:, • Bilingual (English/Spanish). What we offer: • A high-growth and rewarding role in a foundationally strong and rapidly evolving business, • Hourly Pay Range: $22.00 - $23.00/hour based on experience, • Excellent benefits including a 401K Match, • Paid Maternity, Adoption and Paternity leave, • And all the Nuts.com snacks your heart desires + a 40% employee discount EEO STATEMENT Nuts.com is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, age, protected veteran or disabled status, or genetic information.