Trabajos wiring en Albany, New YorkCrear alertas

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Installation Technician II opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities • Install and configure intrusion, fire, CCTV, and access control systems., • Run electrical wiring in confined spaces, including drilling, trenching, and aerial work., • Complete system wiring and equipment setup to meet customer and contract requirements., • Coordinate with Team Lead or Project Manager on scheduling and equipment delivery., • Test and troubleshoot new installations to ensure functionality and code compliance., • Maintain a professional appearance and adhere to safetyand cost guidelines., • Foster positive customer relationships and support contract retention., • Handle proprietary information and documentation percompanypolicies., • MUST HOLD a minimum of 2-3 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems., • High School Diploma or equivalent, • At least 2 video Certifications and 1 Access Control Certification, • Vocational/Technical Degree in electrical, security, or computer systems preferred, • Access Control Certification preferred, • IP Video and IT experience preferred, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • Highly competitive salary, • Company Vehicle, • Company Cell Phone, • Opportunity for annual merit pay increases., • Paid company training, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation,holidayand sick time, • Educational Assistance, • Exceptional growth opportunities

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Installation Technician II opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities • Install and configure intrusion, fire, CCTV, and access control systems., • Run electrical wiring in confined spaces, including drilling, trenching, and aerial work., • Complete system wiring and equipment setup to meet customer and contract requirements., • Coordinate with Team Lead or Project Manager on scheduling and equipment delivery., • Test and troubleshoot new installations to ensure functionality and code compliance., • Maintain a professional appearance and adhere to safetyand cost guidelines., • Foster positive customer relationships and support contract retention., • Handle proprietary information and documentation percompanypolicies., • MUST HOLD a minimum of 2-3 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems., • High School Diploma or equivalent, • At least 2 video Certifications and 1 Access Control Certification, • Vocational/Technical Degree in electrical, security, or computer systems preferred, • Access Control Certification preferred, • IP Video and IT experience preferred, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • Highly competitive salary, • Company Vehicle, • Company Cell Phone, • Opportunity for annual merit pay increases., • Paid company training, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation,holidayand sick time, • Educational Assistance, • Exceptional growth opportunities

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Installation Technician II opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities • Install and configure intrusion, fire, CCTV, and access control systems., • Run electrical wiring in confined spaces, including drilling, trenching, and aerial work., • Complete system wiring and equipment setup to meet customer and contract requirements., • Coordinate with Team Lead or Project Manager on scheduling and equipment delivery., • Test and troubleshoot new installations to ensure functionality and code compliance., • Maintain a professional appearance and adhere to safetyand cost guidelines., • Foster positive customer relationships and support contract retention., • Handle proprietary information and documentation percompanypolicies., • MUST HOLD a minimum of 2-3 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems., • High School Diploma or equivalent, • At least 2 video Certifications and 1 Access Control Certification, • Vocational/Technical Degree in electrical, security, or computer systems preferred, • Access Control Certification preferred, • IP Video and IT experience preferred, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • Highly competitive salary, • Company Vehicle, • Company Cell Phone, • Opportunity for annual merit pay increases., • Paid company training, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation,holidayand sick time, • Educational Assistance, • Exceptional growth opportunities

Job Description Position Summary The Lead Sign Fabricator is responsible for overseeing daily fabrication activities within the sign shop while actively participating in the production of signage. This role ensures fabrication projects are completed accurately, efficiently, and according to company quality and safety standards. The Lead Fabricator provides technical guidance to fabrication staff, coordinates workflow, and helps maintain production schedules to support installation deadlines. Key Responsibilities Fabrication Leadership • Lead and support the fabrication team in the production of all types of signage including illuminated signs, cabinets, channel letters, dimensional lettering, and architectural signage., • Assign daily fabrication tasks based on production schedules and project priorities., • Provide hands-on guidance and training to fabricators and production staff., • Ensure fabrication processes meet company quality standards and client specifications., • Fabricate and assemble signage using materials such as aluminum, acrylic, PVC, steel, wood, and vinyl., • Interpret shop drawings, work orders, and design files to ensure accurate production., • Build complex or high-value signage projects requiring advanced fabrication skills., • Operate and oversee fabrication equipment including:, • CNC routers, • Panel saws and table saws, • Hand routers and power tools, • Welders and metal fabrication tools, • Ensure equipment is operated safely and properly by all team members., • Perform final quality inspections before signs move to paint, vinyl, or installation stages., • Verify measurements, materials, finishes, and structural integrity of fabricated components., • Work closely with the Design, Print, and Installation teams to ensure smooth project flow., • Review work orders and fabrication drawings before production begins., • Enforce shop safety procedures and OSHA compliance., • Maintain an organized and efficient fabrication workspace., • Ensure proper use of PPE and safe equipment operation., • 5+ years of experience in sign fabrication or related manufacturing field., • Strong experience with illuminated signs, channel letters, cabinets, and dimensional signage., • Ability to read and interpret fabrication drawings and production files., • Advanced knowledge of fabrication tools, equipment, and materials., • Strong leadership and team coordination skills., • Lift and carry materials up to 50 lbs., • Stand for extended periods during production shifts., • Frequent bending, reaching, and tool use., • Ability to safely operate shop machinery and fabrication equipment.

Be part of the future! We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference. What you will do This position will be responsible for the installation of complex integrated security systems to include the wiring, equipment and programming of access control systems, CCTV, digital recorders, network recorders, and intercom systems for clients. How you will do it • Capable of installing cabling, field equipment & control equipment enclosures in customer locations according to the national electric code, company and customer guidelines., • Can use electronic test equipment to troubleshoot complicated problems during installation., • Reads and interprets blueprints, diagrams, submittals, specifications, software/systems programs, schematics and operational product manuals., • Readjust equipment, repair or replace inoperative equipment and test for operation, • Performs system checks for proper operation., • Knowledge of computer programs including word processing, spreadsheets and databases; CCTV and access control systems; media storage., • Ability to plan, organize and prioritize work paying close attention to details., • Ability to communicate effectively, orally and in writing, while establishing and maintaining cooperative working relationships., • Ability to analyze information., • Can work unsupervised to complete installation jobs and is self-motivated to complete jobs., • Completes and submits all necessary paperwork related to job assignments., • Capable of using hand and power tools to properly mount and secure equipment, • Feed cables through access holes, roof spaces, and cavity walls to reach fixture outlets; then position and terminate cables, wires and strapping, • Drill holes for wiring in wall studs, joists, ceilings, and floors., • Conduct End- User training., • Ability to isolate trouble to a customer network, where applicable What we look for Required • High school diploma, GED, or equivalent., • A+ certification required., • Significant background (3+ year experience) in Digital & Analog Camera Systems., • Significant background (3+ year experience) in Access Control Systems., • Understanding of the function and design of Alarm Systems., • Experience with IP addressable security devices (2+ years)., • Must be computer literate to include advanced TCP/IP networking skills., • Must be able to operate a company truck with an acceptable driving record., • Is proficient with all aspects and operation of ADT A.I. core card access, CCTV systems. Preferred • Associate Degree or 2-year technical school program graduate preferred., • An industry-recognized apprentice training program may be substituted for the formal education requirement., • Specialized training/ certification in the following categories:, • Access Control (at least 3 certifications from the following), • Prowatch, • C-Cure 800 or C-Cure 9000, • Casi- Facility Commander or Picture Perfect or Secure Perfect, • CCTV- Analog (at least 1 certifications from the following), • Bosch, • Pelco, • American Dynamics, • Cisco, • CCTV- IP (at least 1 certifications from the following), • Genetec, • Indigo Vision, • Visitor Management (experience in any of the following preferred), • Honeywell Lobby Works, • Stopware, • Access Sentry, • Additional experience a plus: MCSE, CCNA, Surveillance Systems, Intrusion Detection Systems, Perimeter Intrusion Detection Systems and Security Gate Operators. Pay Range: Entry level is $20.85/hr. to start. Higher starting rate offered based on experience & skill level. Hourly rate determined by the CBA/rate sheet. Benefits are provided through a local labor union aligned with a collective bargaining agreement. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers.

Job DescriptionFull-time | Steady work | Room to move up | Earn $20–$25/hr (DOE) — plus even higher income with strong production! As an insulation installer, you will focus on installing insulation (fiberglass or rock wool batts) for exterior walls and ceilings. Your day-to-day "office" won't always look the same! However, you can count on the process to provide some consistency. Key Responsibilities: • Loading and logging materials onto a truck, • Erect scaffolding or ladders to the height needed, • Cut the insulation materials to size and install them in frames, ceilings, attics, or crawlspaces, • Installing insulation materials by stapling, gluing, wiring, nailing, or operating equipment that injects loose-fill or foamed insulation, • May be required to drive a company vehicle. If so, follow all driving rules and DOT requirements at all times and maintain your tools/truck, • Observe job site safety rules and know the location of the MSDS packets in your vehicle Role Requirements: • Valid driver's license and reliable transportation, • Installation experience is a plus, • Comfortable using standard hand tools, • Able to work in tight spaces, including attics and crawlspaces, • Able to lift a minimum of 50lbs, • Able to climb ladders and scaffolding, • Able to bend, twist, and turn the body at the shoulders, waist, and knees, • Able to stand for extended periods of time, • Being Bilingual is a plus! Physical demands: As an insulation installer, you will face physical demands such as lifting heavy materials, bending and stooping in tight spaces, and climbing ladders or scaffolding for high work. You must stretch and reach overhead, handle tools with dexterity, and endure long hours of repetitive movements. The work is often performed in challenging environments, such as extreme temperatures or dusty areas. Installers also need balance and stability in confined or unstable spaces and may experience strain from pushing and pulling heavy loads or performing repetitive tasks. Strength, endurance, and flexibility are required to prevent injury. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Pay & Benefits • Medical, dental, and vision insurance, • Company-paid life insurance, • Paid holidays and vacation, • 401(k) and Roth 401(k) with company match, • Supplemental insurance options, • Employee assistance and scholarship programs, • Opportunities to grow into more responsibility if you’re interested Builders Installed Products Albany is a proud member of the Installed Building Products (IBP) family of companies. We take great pride in our commitment to delivering exceptional customer service, which has contributed to our high customer satisfaction ratings. This success is a direct result of our dedication to quality work and dependability. We are always looking for hard-working individuals who share our mission of helping our customers and contributing to the continued success of Builders. Our people are our most valuable asset, and if you consider yourself a leader in this industry, we want to hear from you. Explore your next career opportunity and become a part of the Builders Installed Products Albany team! EEO Statement We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Dave & Busters - - Responsibilities: Build, troubleshoot, and repair games, attractions, and technical equipment; Read schematics and wiring diagrams; Troubleshoot down to the component level; Deliver Friendly, Available, & Memorable guest service; Train others what you know to build knowledge amon

Job DescriptionDescription: Looking to lead a team and make a real difference. Holbrook Heating is searching for a HVAC Lead Installer to join our growing team! In this role, you'll be • Installing residential heating and cooling systems with precision and efficiency., • Leading a team of installers, ensuring projects are completed on time and to the highest quality standards., • Providing exceptional customer service, ensuring a smooth and positive experience for every homeowner., • 5+ years of experience as an HVAC installer, • A strong understanding of wiring diagrams, blueprints, and air balancing techniques, • The ability to troubleshoot and repair a wide range of HVAC equipment, • Excellent communication and customer service skills - building trust with homeowners is key!, • Competitive salary: $55,000 - $80,000 base salary, • Comprehensive benefits package, health insurance, paid time off etc., • Positive work environment - We value teamwork and professional growth! Apply today! Requirements: Qualifications desired: • Certificate of completion from an HVAC Technical School, • EPA Certification, • 5 + years of experience, • Insurable driving record, • Possess tools needed

A full-service HVAC controls, building automation, and energy management contractor This Jobot Job is hosted by: Courtney Hoogervorst Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $35 - $45 per hour A bit about us: A full-service HVAC controls, building automation, and energy management contractor Why join us? • Career Advancement Opportunities, • Stable Client Base/Tenured Staff, • 401K plan, • Company Cell Phone / Laptop, • Health/Dental insurance, • Paid time off + Holidays + Sick time Job Details Position Title: HVAC Controls Installer Location: Washington, DC Metro Area (travel required within ~50-mile radius) Job Type: Full-Time, Field-Based About the Role: We are seeking an experienced and motivated HVAC Controls Installer to join our team. As a key member of the field operations group, you will be responsible for hands-on installation, startup, and commissioning of building automation and HVAC control systems. This position involves working on commercial and institutional projects where precision, quality workmanship, and attention to detail are essential. Key Responsibilities • Install building automation system (BAS) wiring, sensors, controllers, and control panels according to project specifications and industry standards., • Mount, terminate, and connect field devices (temperature sensors, actuators, dampers, etc.) and ensure proper signal integrity., • Perform system startup and commissioning activities, including calibration and integration of BAS hardware components., • Interpret and follow wiring diagrams, control schematics, submittals, and installation drawings., • Coordinate installations with project managers, other trades, and general contractors to ensure smooth project execution., • Conduct quality checks to verify that installations meet design and performance expectations., • Troubleshoot and resolve basic wiring and control device issues encountered during installation., • Document work completed, including timesheets, site reports, and punch lists., • Maintain a safe and organized work environment on all job sites., • Minimum 3+ years of HVAC controls installation experience or similar field installation background., • Solid understanding of low-voltage control wiring practices and building automation components., • Experience with BAS startup and field commissioning., • Ability to read and interpret control schematics and technical documentation., • Valid driver’s license and an excellent driving record., • Ability to lift, climb ladders, and work in confined spaces while managing physical tasks safely., • Prior experience working with commercial BAS platforms (e.g., Johnson Controls, Honeywell, Tridium/Niagara)., • Familiarity with BACnet, Modbus, or similar communications protocols., • Basic understanding of HVAC equipment operation., • Excellent communication skills and ability to work collaboratively. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Electrician, Bureau of Operations.The Division of Administration, Bureau of Operations seeks to hire an Electrician.Duties will include but not be limited to:.Installation, repairs, replacements and maintenance of electric wiring systems and components, equipment and apparatus in or on building stru

Electrician Job Duties: Install, maintain, and enhance electrical systems and components, including fuses, lights, and wiring Inspect, test, and diagnose issues with electrical systems an

Design innovative control systems that power the next generation of automated manufacturing. Join a tight-knit engineering team where your ideas go from concept to production. This Jobot Job is hosted by: Ryan Weingardt Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $95,000 - $125,000 per year A bit about us: Our client is a well-established automation solutions partner serving manufacturers across Wisconsin and Northern Illinois. They specialize in motion control, machine vision, robotics, and industrial automation. Known for their engineering depth and customer-first approach, they help companies reduce risk, improve quality, and accelerate innovation. You’ll join an organization that combines the agility of a design-build firm with the backing of a national technical group, giving you access to best-in-class tools, training, and support. Why join us? • Be part of a respected automation integrator with 25+ years of success in the Midwest, • Collaborate daily with degreed engineers who think like builders, not bureaucrats, • Engage in challenging, hands-on design work – every project is unique, • Excellent stability, professional growth, and technical mentorship, • Competitive compensation, strong benefits, and a collaborative team culture Job Details As a Controls Designer, you’ll develop and document prototype control panels and support the transition of designs into production. You’ll partner closely with engineering, manufacturing, and customers to define application solutions, select components, and ensure successful first-time builds. What You’ll Do: • Design, document, and refine control panel layouts, schematics, and wiring diagrams, • Collaborate with engineering teams and customers to define application requirements, • Identify and implement design improvements to optimize product performance, • Maintain design documentation, revisions, and QC instructions for production builds, • Ensure safety compliance and adherence to internal and UL design standards, • 2-year Technical Degree in Electrical or Mechanical Design (Bachelor’s in Engineering preferred), • Hands-on knowledge of machine control systems and AutoCAD Electrical, • Familiarity with UL standards, wire sizing, labeling, and documentation, • Strong attention to detail, design accuracy, and process discipline, • Ability to turn conceptual requirements into functional, manufacturable designs, • Experience in automation, control panel build, or machine integration environments preferred Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Position Summary The Field Technician III plays a critical role in the on-site installation, servicing, and troubleshooting of signage products. This position involves working with a variety of sign types—including illuminated, non-illuminated, vinyl, and dimensional signs—at commercial and retail locations. The ideal candidate has hands-on technical skills, a strong attention to detail, and a commitment to safety, quality, and customer satisfaction. This position requires strong leadership, technical skills, and the ability to mentor junior team members while maintaining a professional relationship with clients and coworkers. Key Responsibilities Installation & Service · Lead and perform the install a wide range of signage, including wall signs, pole signs, monument signs, channel letters, vinyl graphics, and more. · Perform service and maintenance on existing signs, including lighting repairs (LED/fluorescent), panel replacement, and structure checks. · Safely operate power tools, hand tools, ladders, and lift equipment to perform installations. · Ensure signs are securely mounted and meet all job specifications, alignment, and quality standards. Site Readiness & Preparation · Conduct site checks and surveys before installation to assess conditions, take measurements, and confirm installation methods. · Load materials and tools required for each job; ensure proper staging and transport of signage from the shop to site. · Coordinate with project managers and/or clients on arrival, timelines, and any access or permitting needs. Troubleshooting & Problem Solving · Diagnose and resolve field issues, such as incorrect placement, electrical faults, or unexpected site conditions. · Document site issues and communicate necessary adjustments to the project or design team. Customer & Team Communication · Serve as a professional on-site representative of the company when interacting with clients or property managers. · Provide updates on job progress, completion, or any complications to supervisors or project managers. · Collaborate closely with other installers, electricians, and subcontractors to ensure seamless execution. Compliance & Safety · Follow OSHA and company safety standards at all times. · Ensure job sites are clean and secure before, during, and after work is completed. · Properly use and maintain personal protective equipment (PPE) and lifting equipment (boom lifts, scissor lifts, etc.). Qualifications · High school diploma or GED required. · 3-5 years of experience in signage installation, general construction, or a technical trade preferred. · Comfortable with heights and working outdoors in variable weather conditions. · Experience operating hand tools, power tools, ladders, and lifts. · Basic electrical knowledge (especially low voltage / LED wiring) preferred. · Ability to read and interpret blueprints, install instructions, and measurements. · Strong attention to detail, time management, and communication skills. · Valid driver’s license and clean driving record required. CDL or ability to obtain one is a plus. · Ability to travel locally and regionally as required by project schedules. · Knowledge of building codes and safety regulations. · Strong organizational and time management abilities. · Experience with field service apps. Physical Requirements · Must be able to lift up to 75 lbs. · Regularly required to stand, bend, kneel, climb, and reach. · Comfortable working at heights using ladders or lift equipment. · Exposure to outdoor conditions, power tools, and construction environments.

Job Description Position Summary The Field Technician I plays a critical role in the on-site installation, servicing, and troubleshooting of signage products. This position involves working with a variety of sign types—including illuminated, non-illuminated, vinyl, and dimensional signs—at commercial and retail locations. The ideal candidate has hands-on technical skills, a strong attention to detail, and a commitment to safety, quality, and customer satisfaction. This entry-level position supports senior installers and learns the skills necessary to grow within the installation team. Key Responsibilities Installation & Service · Install a wide range of signage, including wall signs, pole signs, monument signs, channel letters, vinyl graphics, and more. · Perform service and maintenance on existing signs, including lighting repairs (LED/fluorescent), panel replacement, and structure checks. · Safely operate power tools, hand tools, ladders, and lift equipment to perform installations. · Ensure signs are securely mounted and meet all job specifications, alignment, and quality standards. Site Readiness & Preparation · Conduct site checks and surveys before installation to assess conditions, take measurements, and confirm installation methods. · Load materials and tools required for each job; ensure proper staging and transport of signage from the shop to site. · Coordinate with project managers and/or clients on arrival, timelines, and any access or permitting needs. Troubleshooting & Problem Solving · Diagnose and resolve field issues, such as incorrect placement, electrical faults, or unexpected site conditions. · Document site issues and communicate necessary adjustments to the project or design team. Customer & Team Communication · Serve as a professional on-site representative of the company when interacting with clients or property managers. · Provide updates on job progress, completion, or any complications to supervisors or project managers. · Collaborate closely with other installers, electricians, and subcontractors to ensure seamless execution. Compliance & Safety · Follow OSHA and company safety standards at all times. · Ensure job sites are clean and secure before, during, and after work is completed. · Properly use and maintain personal protective equipment (PPE) and lifting equipment (boom lifts, scissor lifts, etc.). Qualifications · High school diploma or GED required. · 1–3 years of experience in signage installation, general construction, or a technical trade preferred. · Comfortable with heights and working outdoors in variable weather conditions. · Experience operating hand tools, power tools, ladders, and lifts. · Basic electrical knowledge (especially low voltage / LED wiring) preferred. · Ability to read and interpret blueprints, install instructions, and measurements. · Strong attention to detail, time management, and communication skills. · Valid driver’s license and clean driving record required. CDL or ability to obtain one is a plus. · Ability to travel locally and regionally as required by project schedules. Physical Requirements · Must be able to lift up to 75 lbs. · Regularly required to stand, bend, kneel, climb, and reach. · Comfortable working at heights using ladders or lift equipment. · Exposure to outdoor conditions, power tools, and construction environments.

Job DescriptionDescription: Technical Manager-HV Substations Lead the delivery of high-impact HV substation engineering that powers the future of energy. As the Technical Manager-HV Substations, you will serve as Fisher’s senior technical authority for HV substation design and engineering, including transmission interconnections, collector switchyards, POI substations, and generator tie systems for renewable and conventional energy clients. In this role, you’ll provide leadership across substation physical design, electrical systems, grounding, protection & controls, and system study coordination, ensuring quality, QA/QC, and compliance at every phase. You’ll mentor engineering staff, partner with Project Managers, support proposals, and shape technical standards and best practices across the firm. Projects span 30%, 60%, and IFC design through construction and commissioning, giving you full end-to-end influence on critical infrastructure. If you’re ready to lead complex HV substation engineering projects, elevate technical teams, and drive grid reliability across renewable and utility-scale energy, apply today and join Fisher Associates. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Technical Manager-HV Substations • Lead HV substation engineering (69 kV–345 kV+) for transmission, interconnection, and utility projects, • Serve as senior technical authority for HV substation design and engineering, • Oversee QA/QC for drawings, calculations, studies, and IFC packages, • Design and review substation layouts, electrical schematics, grounding, conduit routing, lightning protection, and P&C interfaces, • Perform and review power system studies including load flow, short circuit, grounding, protection coordination, arc flash, insulation coordination, voltage drop, and ampacity, • Ensure compliance with NEC, NESC, IEEE, ANSI, NFPA, NERC, utility standards, and permitting requirements, • Interface with utilities and ISOs on interconnection requirements, SCADA/telecom integration, protection philosophies, energization, and commissioning, • Mentor and train engineers and designers, ensuring technical accuracy and quality deliverables, • Support proposal development with scopes, assumptions, and cost estimates, • Support construction and field engineering, including site visits and as-built documentation, • Bachelor’s degree in Electrical or Mechanical Engineering, • 15+ years of substation engineering design experience, • Active Professional Engineer (PE) license required, • Experience with renewable power plants, EPC projects, and utility-scale infrastructure preferred, • Strong background in renewable interconnection, transmission, and utility coordination, • Expertise in power system studies, including short circuit, load flow, grounding, protection coordination, arc flash, cable sizing/ampacity, trenching/cabling, equipment sizing, and lightning/lighting studies, • Ability to develop and interpret SLDs, 3-line diagrams, wiring diagrams, schematics, and substation layouts, • Proficient in AutoCAD, Civil 3D, ETAP, SKM, CYMCAP, • Strong knowledge of IEEE, NESC, NEC, NFPA, ANSI, NERC, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions, • You are empowered to deliver results through collaboration, trust, and ownership., • Your voice matters shaping decisions in an inclusive and transparent culture., • Your growth as a leader is a priority, supported by clear career paths and continuous learning., • You thrive in a positive culture that celebrates wins and keeps work fun and enjoyable., • Your leadership journey focuses on developing, coaching, and empowering high-performing teams. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job Description Overview Tradesmen International is immediately hiring experienced Journeyman Electricians for projects located in the Albany, NY area. This is a first shift opportunity, and the pay rate is $26-35+/hour based on experience and skill level. If you are an Electrician and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career! Job Scope: • Commercial Panel Install & Wiring, • Read schematic drawings, • Install & Bend conduit, • Other tasks as assigned Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen’s full website.

Job Description Job Summary · Road service technician servicing gas, steam, electric and electronic commercial food service equipment at customer locations. · Servicing any equipment used in the preparation of food in commercial establishments such as ranges, dishwashers, steamers, microwave ovens, fryers, conveyor ovens, coffee makers, and toasters. · Service is performed in any commercial kitchen such as those found in schools, restaurants, colleges, and nursing homes. Job Qualifications · Must work well with various hand tools. · Have basic understanding of electrical concepts, basic trouble shooting skills and mechanical aptitude. · Excellent communication skills conveying confidence and understanding to our customers of the service we provide. General Accountabilities · Talk to customers or refer to work orders in order to establish the nature of appliance malfunctions. · Observe equipment in operation and perform adequate troubleshooting measures through but not limited to various test equipment such as VOM, amp probe, pyrometer or manometer, etc. · Refer to schematic drawings, product manuals, and troubleshooting guides in order to diagnose and repair problems. · Replace worn and defective parts such as switches, circuit boards, thermostats, gas valves, burners or defective wiring. · Reassemble units after repairs are made, making adjustments and cleaning and lubricating parts as needed. · Record maintenance and repair work performed on equipment. · Maintain stocks of parts used in on-site installation, maintenance, and repair of appliances. · Observe and test operation of appliances following installation, and make any initial installation adjustments that are necessary. · Instruct customers regarding operation and care of appliances, and provide information such as emergency service numbers. · Handle invoicing of COD customers. · On call approximately every 5th or 6th weekend. · * The company reserves the right to add or change duties at any time. Skills · Troubleshooting · Critical Thinking · Operation Monitoring · Equipment Selection · Judgment and Decision Making · Complex Problem Solving · Time Management Tools · Technicians must have their own general hand tools including but not limited to screw drivers, socket sets, wrenches, and hammers. · Driver’s license. Benefits · Vacation time, sick time, and holiday pay · Health · 401K · Company vehicle · Company cell phone and Tablet Salary · Service Tech Trainee beginning salary $18-$25 · Experienced Tech salary $25-$35 · Overtime available. Company DescriptionCommercial cooking and dishwashing equipment parts and service..Commercial cooking and dishwashing equipment parts and service..

Job Description Commercial/Industrial - Boiler/Burner/Controls Specialist - Albany, NY & Western MA If you like to show off your troubleshooting skills and are a strong customer-focused Technician then we want you! Experienced C&I burner, controls, combustion technicians wanted! We're Blake Thermal Sales & Service, Inc., and we are the official representative of Cleaver Brooks, Camus, and many other C&I equipment manufacturers in the thermal energy industry. We are looking for boiler and burner technicians with a focus on advanced control systems. Don't worry if you're not a "specialist", we are interested in technicians at all levels from apprentices to senior level personnel We offer factory training and certifications, as well as on the job training. Members of our team are all thermal energy & mechanically/electrically minded, self-managed, and extremely customer-focused. OUR COMPANY: Blake Thermal Sales & Service Inc. is the manufacturer's rep for Cleaver Brooks and Camus boilers. Blake Thermal Sales & Service Inc. is a full-service thermal solutions company that supplies engineered products, services, and complete systems. Blake Thermal has a 98-year history of providing an array of products and services supporting steam, hot water for process and domestic heat for commercial, industrial, medical, educational and manufacturing facilities. Headquartered in East Windsor, CT, Blake Thermal maintains multiple locations across New York and New England. • Sole focus on integrating and supplying engineered products, services, and complete thermal systems, • Longstanding relationship as a manufacturer's representative with a 98-year history Ideal Candidates will be in alignment with Blake Thermal's Core Values: • Customer Focused, • Opportunity is Earned, • Solutions Provider, • Trustworthy, • Driven to Succeed Seeking several Field Service Boiler/Burner/Controls Technicians. Experience is a big plus however we will train apprentices as well. Position primarily requires a positive attitude with solution-oriented approach to problem solving. Must take pride in your work and have ability to work as part of a team. As factory authorized service technicians, we demonstrate the highest levels of professionalism and capability to support our equipment. World-Class customer service and efficiency is our goal! If you are driven to establish a career in this industry but do not have the experience in essential functions listed below; you should still apply if you can meet our responsibilities/expectations and physical demands. ESSENTIAL FUNCTIONS: • Hands-on ability for combustion tuning and analysis as well as troubleshooting skills to determine and adjust a full range of burners from .5 to 30 MMBTU input, • Factory start-up and commissioning of various C&I thermal equipment including hydronic boilers, high- and low-pressure steam systems including firetube and industrial water tube boilers, steam turbines, heat exchangers, snow melt systems, etc., • Boiler room analyses for possible opportunities to improve reliability and efficiency, • Understanding of all types of hot water and steam (high pressure & low pressure) boiler support equipment to include deaerators, feed systems, blow down systems, economizers and waste heat recovery equipment, • Understanding of wiring diagrams, electrical, controls and instrumentation, • Burner upgrades/conversions, • Advanced Burner control upgrades/conversions, • Implementation of energy efficiency measures, • Service vehicle with gas card (once trained and independent), • Cell phone, • Extensive technical training & professional development opportunities, • Medical, dental, vision, life/ad&d, and long-term disability, • 401K, • Vacation and paid sick time, • 10 company holidays, • Compensation commensurate with experience, • Perform scheduled & emergency maintenance/repair of the equipment and all other associated equipment, • Perform installation of the equipment at customer sites as well as conducting pre-installation assistance, • Must be available for "On Call" 24 hour emergency service rotation. Additional compensation is provided when "On Call". Overtime/Double-time compensation paid for work performed outside of normal business hours., • Scheduled night and weekend work is sometimes required to meet customer needs. Advance notice will be provided and will show flexibility/consideration whenever possible., • Must have attitude and aptitude to develop a high level of customer service skills, as well as the ability to respond quickly to service calls with good time management and planning, • Must be motivated and fast paced personality with strong work ethic, • Must work effectively with little or no supervision once trained, • Able to read, write and have good oral communications skills in English, other languages a plus, • Computer ability should be proficient for producing required reports, • Must maintain a valid Driver's License to drive rental vehicles & able to pass a DOT physical for driving fleet vehicles as required, a CDL is not required, • Maintain company provided equipment, tools and or fleet vehicle as per company policy., • This role requires ability to pass a pre-hire drug test, pre-hire background check and completion of an I-9 form., • Requires completion of company provided confined space & lockout/tagout training in order to work safely as part of a team, • Responsible for the prevention and/or mitigation of any environmental impact associated with job-related tasks, accidents, and emergency situations or conditions Blake Thermal Sales & Service Inc. is an equal opportunity and affirmative action employer. We do not discriminate by race, color, gender, sexual orientation/ gender identity, religion, ethnic or national origin, sex, age, disability status, or status as a covered veteran. Blake Thermal Sales & Service Inc. is a proud drug-free workplace.

Job Description Job Description: We are seeking an experience technician to work in our Body Shop Responsibilities: • Possess an operating knowledge of measuring systems • Diagnose and repair full-frame vehicles and uni-body structural damage, • Repair and replace body panels, • Replace damaged wiring harnesses or reinstall harnesses after body repair, • Remove and reinstall interiors Job Skills: • Ability to perform research and understand a comprehensive damage repair assessment, • Strong interpersonal skills, • Commitment to a high quality work standards

Job DescriptionDescription: The Manufacturing Maintenance Mechanic performs preventative maintenance and/or repairs of dairy production and processing equipment such as engines, motors, pneumatic tools, conveyor systems, as well as utility related equipment. Duties will also include maintenance of building and support equipment. • Perform preventative maintenance as required on all industrial equipment in the plant including but not limited to conveyers, hydraulics, pneumatics, welding (arc/Heli-arc), gearboxes/drives, valves/pumps, federal fillers, n8 filler., • Able to troubleshoot and repair electrical systems up to 480v, 3 phase, read, and interpret electrical drawings., • Directs and coordinates assembly, fabrication, and installation activities to ensure equipment and systems conform to engineering design and internal specifications and standards., • Recommends design modifications to eliminate machine or system malfunctions or to improve safety, quality, or equipment operating parameters., • Interprets specifications, blueprints, and job orders to workers, and assigns duties., • Ensure compliance with all company policies, plant rules and regulations., • Responsible for reporting and taking any necessary action to prevent food safety and food quality problems from occurring., • Inspects and measures parts to detect wear, misalignment, or other problems., • Realigns and adjusts functional components and control instruments., • Locates damaged air and liquid hydraulic pipes, lines, or wires., • Starts machine and equipment to test operation following repairs., • Performs set-up and operates metalworking tools (i.e., drill press, grinder, etc.) for the repair or creation of existing parts., • Weld equipment and parts as needed., • Reads and understands schematic flowcharts and technical manuals., • Must follow GMP’s, SOP’s, and SSOP’s always., • Uses all personal protective equipment provided by the company in compliance with OSHA regulations., • Installs equipment for new electrical services (120v, 240v and 480v three phase), including wiring, conduit, panels, breakers, contactors, relays, times, and controls., • Performs electrical troubleshooting, maintenance, and repair work; installs or replaces circuit breakers, fuses, variable speed., • Diagnose refrigeration and electrical problems using technical drawings (for example, blueprints, electronic/mechanical schematics) and diagnostic tools (for example, multi-meter, laptop)., • Performs and assists in all operations maintenance activities. All applicable work is done in accordance with National, State and Local Electrical Codes., • Uses the company's computerized maintenance management system to record and access maintenance related information., • Assist the machine operators with training or troubleshooting to minimize equipment downtime. Ensure all repairs are documented., • Assist in training other maintenance staff as needed., • Thorough knowledge of electrical codes, practices, and techniques, tools, and equipment., • Considerable knowledge of and ability to use standard hand and power tools and equipment used in electrical maintenance activities., • Ability to use ladders, scaffolding, and operate hand and power tools in a safe, efficient manner., • Minimize water usage and the generation of wastewater within the scope of the position., • Follows all DFA GMP s and works in a manner consistent with all corporate and regulatory, food safety, quality, and sanitation requirements., • Assist as needed on all types of maintenance calls throughout the plant.Requirements:, • High School Diploma/GED or Technical School, • Minimum 3 years of skilled industrial maintenance experience., • Possess training / experience in at least two or more of the following Areas: Single and three phase industrial electricity and control systems AC/DC drive Systems Pneumatics / hydraulics systems Welding practices and techniques Machining /fabricating practices and techniques Industrial boiler operations Water Treatment Systems HVAC Systems., • Must be able to work a flexible schedule including weekends and holidays., • Considerable knowledge and application of safety standards and precautions pertaining to electrical work., • Training and experience in use of PLC's is a plus., • Prior experience in a food or bottling manufacturing environment a plus., • Ability to interpret simple to complex blueprints and schematics., • Proficient in Preventative Maintenance, over-hauls, modification, and fabrication., • Strong trouble shooting and problem-solving skills., • Able to read, write and speak English., • Ability to work in a fast-paced environment., • College Degree

Job Description We are currently looking for a Power Systems Engineer with a minimum of 5 years of experience in protection and control system design, power system analysis, cost estimating, and bidding document preparation for commercial, industrial, generation and renewables. Typical system voltage levels range from 138 kV to 2.4kV. This position can be filled in any of our New York offices. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. This role can accelerate your career goals through immediate opportunities to lead, and comes with a competitive starting salary, incentive compensation, a comprehensive benefit package, and opportunities to become a LaBella shareholder. Duties • Design projects working directly with clients to develop project scope, identify problems, and propose solutions., • Typical requirements include Protection and Control drawings and documentations (relay one-lines, three-lines, AC/DC schematics, I/O lists, and relay settings, configuration files and etc), panel construction specifications (panel and interconnect wiring as well as panel layouts and elevations), and other supporting documentation., • Comfortable evaluating the interoperability, control features, and communication/protocol aspects of protective relays, RTU’s, LTC Controllers, and other equipment as well as perform power system load flow studies, fault studies, relay setting coordination., • A BS in Electrical Engineering or Electrical Engineering Technology., • 5 or more years of experience in protection and control system design, cost estimating, and bidding document preparation for electrical transmission and distribution substations projects., • A PE license from a US State is desired but not required., • Successful track record designing Protection and Control Systems and performing power system studies., • Knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards are used in designing substation is critical., • Experience with telecommunications, protective relaying, and automation (SCADA) is required., • Interest in low voltage coordination and arc flash studies., • Familiarity with Schweitzer Engineering, General Electric and Basler equipment. Salary Range: $90,000 - $135,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionJob Description: Text JOBS to 811DIG (811344) to connect with our hiring team today! The starting pay is $21.00/hr. for new technicians up to $27.00/hr. for those with substantial prior experience. Are you looking to jump-start your growth in your professional career? How about working for one of the fastest-growing underground utility locating companies in the nation? If you are a quality-conscious, hard-working individual who loves working outdoors, then you should consider a career at Reconn! Your Responsibilities as a Gas Service Tech * Responsible for repairing paint coatings on affected pipes * Responsible for checking gas meters for leaks and corrosion. This includes visual inspection and ensuring all required paperwork/data are completed * Report to the respective work area on time at the start of each shift * Responsible for identifying any abnormal operating conditions on-site * Accurately filling out all forms associated with the inspection visit (form may be electronic or paper) As we look to continue leading the industry in quality and safety, we need people to join our team who are problem solvers, confident, take pride in public safety, and are comfortable in a fast-paced, exciting work environment. From your first day with us and beyond, you will have a direct impact on the safety and protection of the local communities where we live and work. This is a meaningful and unique opportunity to grow, learn a new skill set, and help drive an innovative program to success. These are daytime, full-time positions, and some overtime may be necessary. Training will be provided and paid. No industry experience is necessary. We are currently hiring throughout the Albany, NY area. Why You'll Love Working for Us (Our Benefits): * 100% paid training - We're invested in you, starting on your first day. * High-quality company vehicle & fuel card - All work-related expenses are paid. This means you won't be putting mileage on your personal vehicle for work. * Company laptop, phone, & equipment - Advanced technology you can count on. * DailyPay - Access your pay when you need it. * Comprehensive insurance options - A variety of excellent insurance choices including medical, dental, vision, and life. * 401(k) with company match - We'll help you save for the long term with our competitive 401(k) employer match program. * PTO & paid holidays - Even in your first year, so you can spend time with your loved ones. * Weekend & holiday on-call pay - Earn extra money while on call over the weekend or on a company holiday, even if not called out to an emergency. * Technician Incentive Plan - Bonuses based on individual quality and safety results. * Career Path Program (CPP) - Unmatched in our industry. We recognize employees who strive to be the best in their roles with distinctive titles, promotions, and more. * USIC All Stars - Our employee recognition program. Earn points for living our company values and celebrating milestones. Redeem your points for gift cards or merchandise! * Tenure Boots Program -$200 voucher to buy a new pair of work boots on your first anniversary and every year after. * Education Partnership & Scholarship Program - Discounted tuition for USIC employees, their spouses, and dependents through Indiana Tech (courses available online nationwide). Scholarships available for employees. Credit hours for completing our utility locator training curriculum and/or for military service. * Employee discounts & perks - Outstanding discounts at major retailers and service providers. What We Need from You (Our Requirements): * Able and willing to work outdoors in various weather conditions. Previous outdoor experience is a plus. * Available to work overtime, weekends, and on-call shifts as needed. * Ability to travel locally during the business day; some out-of-area or overnight travel may be expected. * Able to pass a drug screen (this is a safety-sensitive position). * Valid driver's license and a safe driving record * Able to stand and walk for long periods of time on varying types of terrain; bend and stoop; lift heavy items up to 75 lbs. * Able to distinguish between colors used to identify wiring and mark underground utilities. * Computer proficiency * Able to read, understand, and reference locate tickets, as well as maps and prints; possess basic math skill to calculate distances. * Able to communicate clearly with colleagues, customers, contractors, and homeowners. Customer service experience is a plus. We are an Equal Opportunity Employer. Veterans are encouraged to apply. When texting, message and data rates may apply. View our terms and conditions here: and our privacy policy here: .

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact: Are you a skilled and highly motivated Generator Technician who is looking to learn and grow in a fast-paced, challenging job in the Telecom industry? If so, Pearce has a career for you! Our Generator Technicians service and repair commercial generators on cell phone towers in your region. This role is a great match for independent, self-starters who are willing to travel. Core Responsibilities: • Maintaining generators, diagnosing and repairing problems, installing and replacing components or entire systems, and performing additional maintenance or upgrades on out-of-season equipment, • Conducting performance checks and regular maintenance on generators to ensure proper readiness, reading and following blueprints or other design specifications to install or repair, • Install fuel and water supply lines, pumps, electrical wiring and controls, and other components, and test for proper operation, • Be responsible for responding promptly/timely to Power/Generator alarms; have the ability to be on call 24/7 if necessary and respond promptly in answering assigned phone and email Core Experience: • Two or more years of experience with generator maintenance is preferred and a minimum of one year of intense work-related experience with generator and electrical maintenance-related software, hardware, and processes, • Thorough knowledge of generator installations, maintenance, and repair of Generators; knowledge of electronic, mechanical, and electrical components; moderate computer skills At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • This position requires lifting over 50 pounds, stooping, bending, kneeling, squatting, climbing, and standing for long periods of time, • Must have the ability to inspect and/or troubleshoot equipment/alarms effectively, both visually and audibly, • Must be willing and able to drive long distances, workday, evening, or night hours; overtime, emergency callouts, weekends, and holidays as required; must assume 24-hour on-call duty when assigned and be gone from home for extended periods of time In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30—$40 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

Job Description *Applicants MUST submit a cover letter with resume to be considered. *This position will require in-office presence. Hybrid work schedules may be possible based on specific job duties and consistent with ESD policy. *Minorities, women, and individuals with disabilities are encouraged to apply. Please contact Human Resources if you require an accommodation. BASIC FUNCTION: The ConnectALL Office seeks candidates for the role of Director, Field Inspection. Reporting to the Assistant Vice President of Broadband Deployment, the ideal candidate will possess exceptional leadership abilities, program and project management skills, and the ability to effectively collaborate with internal and external stakeholders. The role offers a candidate with deep experience in broadband construction methodologies the opportunity to implement a field inspection program that encompasses rights-of-way permitting, pole licensing, and quality assurance inspections at scale across ConnectALL funded broadband infrastructure projects. WORK PERFORMED: • Collaborate with internal and external stakeholders, including engineering teams, legal departments, regulatory agencies, and utility companies to formulate recommendations and facilitate improvements to the pole make-ready process, permitting, and inspection procedures., • Establish and maintain relationships with pole and joint pole owners across all carriers, ensuring compliance with regulations and standards., • Identify and incorporate applicable local, state, and federal regulations into the ConnectALL inspection procedures., • Coordinate resources to and/or directly conduct detailed physical audits of projects at varying stages to verify construction progress and confirm that completed projects comply with approved project proposals and applicable safety regulations., • Identify measurable quality assurance inspection milestones to support project implementation and program completion deadlines., • Develop and implement inspection procedures, quality assurance plans, and acceptance criteria for inspection, testing, and approval of wireline and wireless broadband installations., • Define and implement procedures for deployment corrections or modifications, when necessary., • Identify and incorporate relevant data attributes into the inspection program to maintain records of inspection results, track progress of completed inspections and deficiency remediation; work with ConnectALL leadership to ensure secure and organized storage of all records, with ability to generate reports., • Identify and communicate project risks, deployment concerns, progress updates to ConnectALL leadership, as needed., • Identify and procure tools, equipment, and software necessary to support field inspection and verification activities., • Other tasks as needed to implement the Governor’s ConnectALL agenda. MINIMUM REQUIREMENTS: Education Level Required: Bachelor’s degree. Associate’s degree with 7 years, direct relevant experience may substitute. Relevant Experience required: A minimum of 7 years of experience focused on field inspection and/or outside plant telecommunications construction and installation. Certified Fiber Optic Technician (CFOT). Experience with State and local permitting agencies and processes such as DOT, local municipalities, and private ROW owners. Experience with inside plant construction, in building wiring and roof rights and regulations associated with the deployment of broadband infrastructure and buildings. Knowledge Required: Knowledge of and experience with broadband delivery technologies, network designs and topologies, and technical and regulatory issues related to broadband and telecommunications deployment. Must be able to translate experience deploying broadband projects in the field into systems for evaluating, inspecting, and reporting on infrastructure projects funded by ConnectALL. Experience generating or reviewing as-built documents, bill of materials, and other documentation of broadband projects. Experience with broadband deployment, including both aerial and underground fiber placement and fixed wireless deployment. Experience with Microsoft Excel, ArcGIS and Google Earth preferred. Professional Engineer license preferred. Experience with State and local permitting agencies and processes such as DOT, local municipalities and private ROW owners.

Job Description Now Hiring: Arcade/Game Technician Location: Apex Entertainment Albany Are you mechanically inclined, tech-savvy, and passionate about arcade games? Apex Entertainment is seeking an Arcade/Game Technician to keep our games running smoothly and ensure every guest has a flawless and fun experience. If you're ready to put your skills to work in a fast-paced, high-energy environment - this is your opportunity to be a vital part of the team behind the fun! Position Overview: As an Arcade/Game Technician, you'll be responsible for maintaining, repairing, and troubleshooting our arcade machines and equipment. Your work ensures that everything from classic cabinets to the latest video games operates at peak performance, providing guests with an exceptional entertainment experience. Key Responsibilities: Maintenance & Troubleshooting * Diagnose and repair arcade game malfunctions, software issues, wiring, and hardware failures * Perform routine corrective maintenance to minimize downtime and extend machine life * Record daily repairs and maintenance tasks for tracking and compliance Preventative Care & Installations * Conduct scheduled preventative maintenance to maintain functionality and visual appeal * Install and calibrate card readers and upgraded components on arcade machines * Follow detailed maintenance schedules to ensure all machines are up to standard Inventory & Reporting * Monitor and manage arcade part inventory and equipment supplies * Run weekly/monthly payout percentage calibrations * Order, receive, and install replacement parts as needed Cleanliness & Organization * Maintain a clean, organized arcade space and technician workspace * Ensure all machines are clean, filled, and ready for guest use * Organize spare parts and tools for quick access and efficient repairs Safety & Compliance * Follow safety procedures and maintain a safe work environment * Keep logs and checklists updated for daily, weekly, monthly, and annual inspections Team Support * Assist with additional facility tasks as directed by management * Work collaboratively with other departments to ensure smooth operations What We're Looking For: * Mechanical or arcade maintenance background preferred * Previous experience repairing arcade games is a plus * Must be at least 18 years old * Valid driver's license or reliable transportation * Ability to lift and move 50+ lbs * Strong troubleshooting, technical, and organizational skills * Flexible availability including days, nights, weekends, and holidays Perks & Benefits: * Join a passionate, high-energy team dedicated to fun and service * Competitive pay and opportunities for advancement * Free access to attractions * 50% off select food items * Flexible scheduling to support work-life balance Love arcade games and have the skills to keep them running? Apply now to become an Arcade/Game Technician at Apex Entertainment - and help us create unforgettable experiences for every guest!

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Practical knowledge of circuit card and wiring harness development and manufacturing processes.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.L3Harris provides an inclusive, engaging environment designed to empower empl

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.L3Harris provides an inclusive, engaging environment designed to empower empl

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.L3Harris provides an inclusive, engaging environment designed to empower empl

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration.Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and t

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration.Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and t

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration.Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and t

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration.Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and t