Carbon jobs in WakefieldCréer des alertes d'emploi

D7 Recruitment are seeking an Environmental & H&S Advisor, you will ensure KEY complies with environmental regulations and maintains the highest standards of health and safety. You will support the Compliance Director in developing, implementing, and monitoring policies and procedures that promote a safe workplace and minimise environmental impact. You will be Responsible for the Health and Safety of yourself and those around you. You will ensure all H&S policies and practices are adhered to and escalated in the correct way. Act in a way that does not subject any other employees, potential employees, workers, or clients to direct or indirect discrimination, harassment, bullying or victimisation. Ensure that GDPR and confidentiality protocols are always complied with. Conduct yourself in line with Company standards in order to maintain the Company’s integrity. Location: Wakefield / Some home work - must be prepared to travel to sites when needed. Salary: £35,000 - £45,000 + Car allowance Environmental & Sustainability Management • Support project teams in implementing the Environmental Management System (EMS) in line with ISO 14001., • Carry out environmental site inspections and audits, providing clear reports and follow-up actions., • Advise on site environmental issues, including waste management, pollution prevention, ecology, noise, dust, and carbon reduction., • Prepare and maintain environmental documentation such as CEMPs, environmental risk assessments, and waste management plans., • Track and report environmental performance indicators including waste, recycling, energy usage, and incidents., • Liaise with regulators, clients, consultants, and local authorities as required., • Deliver environmental training, inductions, and toolbox talks. Health & Safety Support • Assist project teams with implementing H&S procedures and safe systems of work., • Support site audits and inspections to ensure compliance with UK legislation including HASWA 1974 and CDM 2015., • Assist investigations into environmental or safety-related incidents., • Promote positive environmental and safety culture across all construction activities. Essential • Degree or equivalent in Environmental Management, Environmental Science, Sustainability, or related discipline., • Mid-level experience in an environmental role within construction, ideally within retail fit-out or refurbishment., • Strong knowledge of UK environmental and construction legislation., • Practical understanding of on-site H&S requirements and collaboration with H&S teams., • Full UK driving licence. Desirable / Working Towards • NEBOSH General or Construction Certificate (or working toward)., • ISO 14001 internal auditor qualification (or willingness to obtain). For more information or to apply for this position, please contact: Brian Cave Recruitment Consultant

An established engineering and manufacturing business based in Dewsbury is seeking an experienced Welding Coordinator to join their team at their Dewsbury site. The role is paying up to £55,000 annually + a great benefits package, including a 1.30pm finish on a Friday! Salary and Benefits of the Welding Coordinator: Salary: £50,000 – £55,000 per annum (dependent on experience) Benefits • 1:30pm Finish Every Friday, • 25 Days Holiday + 8 Bank Holidays, • Company Pension Scheme, • Company-Funded Healthcare Plan, • Free Onsite Parking Welding Coordinator Role Overview The successful candidate will be responsible for ensuring all welding activities, processes and procedures fully comply with ISO 3834 requirements, supporting safe, compliant and high-quality manufacturing operations. Key Responsibilities of the role: • Review technical and contractual welding requirements, • Manage and oversee subcontract welding activities, • Qualify welding procedures, welders and welding operators, • Develop, review and maintain Weld Procedure Specifications (WPS), • Ensure suitability, maintenance and calibration of welding equipment, • Support production planning activities relating to welding operations, • Select, control and ensure suitability of materials and welding consumables, • Coordinate inspection and testing activities before, during and after welding Skills, Knowledge & Experience Needed of the Welding Coordinator: The role requires experience up to and including Execution Class 2 of BS EN 1090-1, with a strong understanding of: • Welding procedures and welding health & safety, • Welding process technologies including MAG, MMA, TIG and SAW, • Welding metallurgy of carbon steel and stainless steel (aluminium desirable), • Welding design principles and welding symbols, • Welding defects, including root cause analysis, preventative measures and remedial actions, • Inspection techniques, including visual inspection, NDT and destructive testing, • PWPS, WPQR and WPS – formulation, certification and interpretation, • Welder Qualification Test Certification (WQTC), • Welding quality systems and standards, including compliance with, • BS EN 1090, EN ISO 3834, and implementation of a Factory Production Control (FPC) system How to Apply for the role of Welding Coordinator: To apply for the role of Welding Coordinator, please submit your CV directly. Alternatively, for more information, please contact Toni-Marie Monks at E3 Recruitment.

With over 50 years of engineering excellence, this organisation delivers high-performance pipework solutions to critical industries across the UK. Due to continued growth, they are expanding their welding team and seeking experienced professionals who take pride in precision, safety, and quality workmanship. Based at a West Yorkshire workshop, this role offers a mix of site and workshop work on diverse projects nationwide. Its ideal for coded welders who enjoy technical challenges, variety, and working alongside skilled pipefitters. Weekend work and working away will be required at times, depending on project demands. Benefits 25 days holiday plus bank holidays Overtime paid at enhanced rates Overnight allowance paid in advance when working away Transport, accommodation (single occupancy) and breakfast provided for site work All PPE and specialist tools supplied Free onsite parking Death in service cover Contributory pension scheme Employee recognition programme Company social events Mental health support Ongoing training and development opportunities Requirements Time-served pipe welder Proven TIG and MMA (low hydrogen) experience, with MIG knowledge beneficial Ability to weld wall thicknesses from 1mm to 32mm Experience with welds subject to NDT and destructive testing Ability to read and interpret engineering drawings and technical documentation Strong attention to detail and commitment to quality Ability to work independently and as part of a team Reliable, punctual, and safety-conscious Full UK driving licence Right to work in the UK Proof of relevant welding codings (current or expired) Apprentice trained (Level 2 or 3 Welding/Fabrication) (DESIRED ) CCNSG Safety Passport ( DESIRED ) Forklift licence ( DESIRED ) The Role You will carry out coded welding to ASME or EN standards on pressure pipework, vessels, and associated fabrications in carbon steel and stainless steel. Typical welding processes include: TIG root and hot pass MMA (low hydrogen) fill and cap TIG cap where required (in line with WPS) Key Responsibilities Welding small bore ( Fabrication, welding, installation and modification of commercial and process pipework Working in all welding positions to tight tolerances Producing welds to radiographic standards Interpreting engineering drawings and weld symbols Supporting installation and modification of industrial pipeline systems Maintaining excellent housekeeping and H&S standards Mentoring junior team members when required If youre a skilled coded welder looking for varied projects, strong team support, and long-term stability, this is an excellent opportunity to join a respected engineering environment.

A growing Engineering Consultancy in Dewsbury is seeking a skilled Welder to join their team on a contract basis.

A growing engineering consultancy in Dewsbury is seeking a skilled Welder to join their team on a contract basis.The role involves TIG welding of stainless steel and carbon steel, fabricating components to engineering drawings, and ensuring high quality and safety standards.Ideal candidates will hav

Weld test at interview stage includes: TIG butt weld stainless tube or TIG butt weld carbon steel; stainless pipe‑to‑plate fillet weld; additional bonus if you can STIK (MMA) weld!; MMA butt & fillet weld carbon steel plate. Apply now for this TIG Pipe Welder role and take the next step in your

What Are We Looking For? Our Asset Management & Technical Services business platform is expanding their division across England with the hire of an experienced Document Controller. The primary function of the role will be to provide support to the wider business and ensure QA/QC of design and manufacturing teams meet compliance for CAD/BIM information output. They will ensure technical documents and design drawings are issued following procedures and provide document guidance to all team members. Some of Your Key Duties Include: Controlling BIM and Autodesk Construction Cloud (ACC) project documentation. Advising the numbering, naming convention, filing and formatting of documents and drawings issued by the design teams. Following and improving document control procedures. Ensuring site and office documentation conform to the company and client requirements and standards. Develop towards using PowerBi Dashboards, reviewing non-compliance on ACC projects. Produce document progress reports for senior managers. Produce BIM Execution Plans. Tracking and dealing with staff queries and problems. What Do You Need? Experience of working with/in ACC and ProjectWise is mandatory. Excellent communication skills, both written and verbal. Ability to work to deadlines and produce work to a high standard. Understanding the BIM process would be advantageous. Full UK Driving Licence. Who Are We? RSE is a trusted clean water technology company, developing market leading products and solutions for purifying drinking water, recycling wastewater and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. RSE provides offsite modular build solutions using a low-carbon approach compared to traditional construction methods and our unique offering to the market focuses on innovation, efficiency, and excellence. Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure were on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSEs key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What RSE Offer To build successful teams and drive the level of quality that RSE is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in an innovative and fast-paced environment. At RSE, youll be given every opportunity to set the path of your own career through our Business Streams and work within dynamic teams that will require you to rise to the challenge of working for a market leader. Industry-leading salary based on your experience. Hybrid Working (where applicable) A flexible career development path, with no restrictions on where your career can go. Private Healthcare (Personal) Holiday Allowance of 31 days per year, rising to 33 days per year after 2 years service. Holiday Buy / Sell Scheme Company Pension Scheme Cycle to Work Discounted National Gym Membership Professional Fees Paid Employee Discount Platform EV/Hybrid Car Lease Scheme Access to our network of health professionals including mental health champions and Occupational Health Nurse. In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If youre interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply now TPBN1_UKTJ

Job Title: TIG – MMA Coded Welder Location: Ossett (WF5) + Nationwide Site Work Job Type: Permanent | Full-Time Salary: Competitive + Overtime up to 1.8x + Excellent Benefits Ready for Your Next Welding Challenge? AQUMEN Recruitment is hiring an experienced TIG – MMA Coded Welder to join a busy, specialist engineering team delivering high-performance pipework projects across the UK. Based in Ossett with regular nationwide site work, this role is perfect for welders who thrive on technical variety, precision work, and working to the highest standards. Workshop and working away are both required. Overtime and weekend work available. The Role You'll be welding to ASME and EN standards across carbon steel and stainless steel pipework, including: Small and large bore heavy wall pipe (up to 32”) Pressure piping, vessels, tank headers & spool fabrications Wall thicknesses from 1mm to 32mm TIG root & hot pass, MMA fill & cap (as per WPS) Welds subject to radiographic, NDT and destructive testing What We Need Time-served Pipe Welder Strong TIG & MMA (Low Hydrogen) experience Ability to read and interpret engineering drawings & weld symbols Proof of relevant codings (current or expired) Full UK driving licence Reliable, detail-focused and team-oriented Willing to work overtime, weekends and work away when required MIG, apprenticeship, CCNSG or FLT licence are advantageous. What's in It for You? 25 days holiday + bank holidays Overtime: 1.4x Mon–Sat | 1.8x Sunday Paid subsistence (in advance) when working away All travel covered + single occupancy hotel with breakfast PPE and specialist tools provided Pension, death in service & recognition scheme Ongoing training and development If you take pride in high-quality welds and want steady, long-term work with strong earning potential — apply today. AQUMEN Recruitment – Engineering Your Future. Aqumen Business Solutions is acting as an Employment Agency in relation to this vacancy. TPBN1_UKTJ

What Are We Looking For? Our Asset Management & Technical Services business platform is expanding their division across England with the hire of an experienced Planner. This position will be responsible for planning projects in conjunction with the design, delivery, commissioning and commercial teams, whilst reporting into the wider management team. Some of Your Key Duties Include: Develop logic-driven, cost and/or resource loaded programmes for projects. Create detailed design and construction programmes, incorporating contractor and sub-contractor programmes where applicable. Monitor, update, and report on status of programmes. Assist in keeping projects on track by identifying critical activities and evaluating remedial actions. Provide multi-project programmes to identify resource constraints. Develop effective working relationships across the various teams and departments. Liaise with the clients, Project Managers and Engineers. What Do You Need? Prior experience of working in a similar position within a construction Design & Build environment. Proficient in the use of Primavera. Excellent communication skills, both written and verbal. Strong analytical and problem-solving abilities. Initiative and ability to work alone and as part of a team. Full UK Driving Licence. Who Are We? RSE is a trusted clean water technology company, developing market leading products and solutions for purifying drinking water, recycling wastewater and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. RSE provides offsite modular build solutions using a low-carbon approach compared to traditional construction methods and our unique offering to the market focuses on innovation, efficiency, and excellence. Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure were on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSEs key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What RSE Offer To build successful teams and drive the level of quality that RSE is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in an innovative and fast-paced environment. At RSE, youll be given every opportunity to set the path of your own career through our Business Streams and work within dynamic teams that will require you to rise to the challenge of working for a market leader. Industry-leading salary based on your experience. Hybrid Working (where applicable) A flexible career development path, with no restrictions on where your career can go. Private Healthcare (Personal) Holiday Allowance of 31 days per year, rising to 33 days per year after 2 years service. Holiday Buy / Sell Scheme Company Pension Scheme Cycle to Work Discounted National Gym Membership Professional Fees Paid Employee Discount Platform EV/Hybrid Car Lease Scheme Access to our network of health professionals including mental health champions and Occupational Health Nurse. In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If youre interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply now. TPBN1_UKTJ

About The Role Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive. Where will you be working? We help our clients safeguard the water supply, improve environmental performance and manage demand for future generations. We enhance and extend asset life, ensuring compliance with water quality and environmental standards. Were problem solvers with over 140 years of combined experience in engineering and infrastructure. This role will be within our MEICA and capital maintenance team. Our Mechanical, Electrical, Instrumentation, Control & Automation (MEICA) experts offer a one-stop solution, including ongoing operation and maintenance services. Want to be a part of it? What will you be doing? M Group Water is currently looking to recruit Design Managers to work on our contracts across the UK. You'll provide design leadership across small to large infrastructure projects, coordinating multidisciplinary in-house and external design teams including civil, MEICA, process, and geotechnical engineers to deliver compliant, high-quality designs on time and within budget. Ensure all outputs meet client requirements, technical standards, and UK legislative obligations, including full compliance with CDM 2015 regulations. Working closely with senior leadership and delivery teams, help establish robust design processes, procedures, and governance to support right-first-time design delivery. Manage design programmes, technical risk, change control, resourcing, and forecasting, ensuring alignment with construction and operational needs. Act as the primary technical interface with clients and stakeholders, embedding buildability and operational requirements into designs while championing innovation, sustainability, and low-carbon solutions. Place strong emphasis on health and safety by ensuring design risks are identified, mitigated, and clearly communicated for the construction phase. I also mentor and support junior engineers, fostering a collaborative, high-performing design environment. What youll bring A degree (or equivalent) in an engineering or scientific discipline (e.g., Civil, Mechanical, Electrical, or Process Engineering). Significant experience in design and management within the water or a related infrastructure sector. Proven track record of project leadership and successful delivery of complex, multidisciplinary projects. In-depth knowledge of UK H&S and design regulations, particularly CDM 2015. Excellent communication, leadership, and project coordination skills, with the ability to manage and motivate diverse teams. Commercially astute with experience in managing project finances, risks, and change control. Whats in it for you? We offer a range of benefits designed to support your life in and out of work, some of which include; Matched or contributory pension scheme Online GP service, 24 hours a day, 365 days a year Employee assistance programme My Rewards portal, access to 1000s of retail discounts Life assurance Cycle to work, salary finance and give as you earn schemes Enhanced maternity, paternity leave and adoption leave Reward and recognition scheme In addition, this role offers; Company car and fuel card with a range of EV and hybrid vehicles to choose from My Car Choice our salary sacrifice EV/ Hybrid car scheme Private health care for youplus health Care Cash Plan, giving you the ability to claim back medical expenses for things like dental, eyecare and physiotherapy and much more! 25 days annual leave plus bank holidays Recommend a friend get rewarded for introducing people to us! Personal Accident Cover About us We want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. Were one of the Top 100 UK companies actively supporting and recruiting army veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs. Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. Were responsible and go further for our people, clients, communities and the planet Were open and seek new and better ways of exceeding expectations Were together and as one team; the whole is greater than the sum of the parts Were ambitious and embrace opportunity, to lead essential infrastructure services for life Whether youre a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development. Its an exceptional time to be a part of M Group. Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered. For certain roles, successful candidates will be subject to 3rdparty background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding. #MGroupW TPBN1_UKTJ

An established engineering and manufacturing business based in Dewsbury is seeking an experienced Welding Coordinator to join their team at their Dewsbury site. The role is paying up to £55,000 annually + a great benefits package, including a 1.30pm finish on a Friday! Salary and Benefits of the Welding Coordinator: Salary: £50,000 - £55,000 per annum (dependent on experience) Benefits: 1:30pm Finish Every Friday 25 Days Holiday + 8 Bank Holidays Company Pension Scheme Company-Funded Healthcare Plan Free Onsite Parking Welding Coordinator Role Overview The successful candidate will be responsible for ensuring all welding activities, processes and procedures fully comply with ISO 3834 requirements, supporting safe, compliant and high-quality manufacturing operations. Key Responsibilities of the role: Review technical and contractual welding requirements Manage and oversee subcontract welding activities Qualify welding procedures, welders and welding operators Develop, review and maintain Weld Procedure Specifications (WPS) Ensure suitability, maintenance and calibration of welding equipment Support production planning activities relating to welding operations Select, control and ensure suitability of materials and welding consumables Coordinate inspection and testing activities before, during and after welding Skills, Knowledge & Experience Needed of the Welding Coordinator: The role requires experience up to and including Execution Class 2 of BS EN 1090-1, with a strong understanding of: Welding procedures and welding health & safety Welding process technologies including MAG, MMA, TIG and SAW Welding metallurgy of carbon steel and stainless steel (aluminium desirable) Welding design principles and welding symbols Welding defects, including root cause analysis, preventative measures and remedial actions Inspection techniques, including visual inspection, NDT and destructive testing PWPS, WPQR and WPS • formulation, certification and interpretation Welder Qualification Test Certification (WQTC) Welding quality systems and standards, including compliance with BS EN 1090, EN ISO 3834, and implementation of a Factory Production Control (FPC) system How to Apply for the role of Welding Coordinator: To apply for the role of Welding Coordinator, please submit your CV directly. Alternatively, for more information, please contact Toni-Marie Monks at E3 Recruitment. TPBN1_UKTJ

Offshore SHW Advisor – Wind (Contract).Scotland (remote) – occasional head office days & vessel visits on crew change days.March – November 2026) + possible extension.Full UK working rights required.Are you an experienced SHW professional with a background in marine construction or offshore wi

Quantity Surveyor About the Role We are seeking an experienced Quantity Surveyor to support a range of building, civil engineering and MEP engineering projects within a major healthcare campus.You will be involved throughout the full project lifecycle-from early-stage calculations and feasibility

Join a global leader in underwater acoustic technology, known for over five decades of innovation in navigation, positioning, communication and sensing systems used across energy, ocean science, autonomous marine robotics, and maritime security.This role offers the chance to influence the acoustic p

Job Title: Account Specialist - Gastroenterology Location: South London Contract: 12 Months Hours: 37.Rates: £32-35p/h Job Description SRG are looking for an account specialist for a leading pharmaceutical company, focused on covering the South Central territory.The focus of this role i

Multiskilled Maintenance Technician - Electrical Bias.Location: Kingston / Surbiton (Kingston University Student Living Sites).EQUANS are looking for an experienced, electrically-qualified.Multiskilled Maintenance & Service Technician.Kingston University's student accommodation portfolio.This is a h

Exciting Opportunity: Engine Mechanic/ Technician Wanted.Are you a skilled aerospace industry professional with a passion for engine maintenance and repair? This company is seeking an experienced.

Farnborough (Full-time, On-Site).We are supporting a leading aerospace organisation in the recruitment of.This is an exciting opportunity to be part of cutting-edge high-altitude platform tech.

Mechanical Fitter - Pipework and Plant 2no.Month contract position - Monday - Friday 7.The company is a UK leading, multi disciplined engineering firm specialising in major mechanical and electrical installations within the food processing industry.The huge range of work carried out by the company i

Carbon60 are looking for a Project Engineer to join the Manufacturing Engineering function of our leading aerospace client in Broughton.

This role plays a key part in industrial sequen.

With the support of the Innovate UK fund and in collaboration with Preoptima, we re currently rolling out our Planning Application Carbon Evaluation and Reduction (PACER) digital platform this will transform the review of whole life carbon assessments in planning, creating a robust, standardised and

Multi Skilled Engineer (Mobile) - Temporary Contract.We are currently recruiting for a.Multi Skilled Engineer (Mobile).This is an excellent opportunity for an experienced engineer to join a well-established organisation, working across multiple sites in Cornwall.

Senior Manager - Software Engineering.Farnborough (Full-time, on-site).Off-Payroll Working Rules (IR35) Apply.A leading aerospace and engineering organisation is seeking an experienced.Senior Manager, Software Engineering.

Assistant Carbon and Energy Manager Fixed term to 31 July 2028 Were looking for an analytically minded and sustainability-driven individual to join us as an Assistant Carbon and Energy Manager. This is an exciting opportunity for som

Are you an experienced Avionics Technician seeking a rewarding role in the dynamic aerospace industry? Carbon60 is seeking a skilled Avionics Technician to join their talented Client in Farnborough, UK.

Exciting Opportunity: Aircraft Structures Technician - Permanent or ContractAre you a skilled aircraft engineer with a passion for precision and attention to detail? This company is seeking an exceptional Aircraft Structures Technician to join their dynamic team

Operations Change Support Agent.Until end of 2026 (with strong likelihood of extension).An excellent opportunity has arisen for an.Operations Change Support Agent.

This role involves enhancing operational performance through process optimization in low-carbon energy schemes.

Carbon60 are currently looking for a Electrical Installations Design Engineer to join a client of ours based in Filton.

The ideal candidate will have significant experience in laminating composite and carbon fibre materials, particularly within the Motorsport or F1 sectors.

Senior Scientist - Cyber AI / ML Research (Contract)Location: Newport (minimum 3 days on site) Contract Duration: 12 months, with strong potential for extension Pay Rate: £50 per hour Umbrella / £37.PAYE Hours: 35 hours per week, flexible between 7am-7pm Clearance: BPSS+ IR35: Inside IR35 About th

You will also work with academic colleagues and external partners and contractors to promote awareness of energy use and carbon reduction, particularly in relation to Scope 1 and 2 emissions. To review and update the Energy and Carbon Management Policy and its accompanying Management Plan, ensuring

A global financial services organization in London seeks a Business Operational Risk Manager to oversee operational risks within the Commodities and Global Markets Group.The role involves providing expert advice on trading risks, improving risk processes, and collaborating with trading desks.Candida

Identify, manage and execute carbon credit trading opportunities and strategies in the voluntary carbon market. In this position, you will be responsible for buying and selling carbon credits within the Voluntary Carbon Market (VCM) and related mechanisms. You will identify and capitalize on market

Carbon60 is seeking a talented Surface Technology Specialist to join their team in Filton.

A leading engineering contractor in water treatment is seeking a Senior Mechanical Design Engineer to oversee design projects across England.You will ensure compliance with regulations and deliver innovative solutions in the water/wastewater sector.Ideal candidates will have mechanical design experi

Skilled Aircraft FitterFilton, Bristol - 100% Onsite£27.PAYE)12-month contract - likely extension & potential for permanent roleStart date intake: May 2026About the RoleWe are supporting a leading aerospace organisation in the recruitment of Skilled Aircraft Fitters to join their production team on

Our success is underpinned by the quality of our emissions data, and we’re looking for a carbon specialist to support the execution, research and delivery of CarbonChain products to customers. Banks, traders, and manufacturers use our product to tame the complexity of international supply networks

Policy and Landscape Research: Support research into the evolving carbon and energy policy landscape, monitoring changes in emissions disclosure requirements, regulatory frameworks, and emerging best practices. Basic understanding of carbon accounting or environmental management principles. As the G

Climate17 is working with a fast-growing low-carbon transport and energy infrastructure business supporting the decarbonisation of the UK freight and logistics sector. Logistics Manager – Low Carbon Transport.