Customer support engineer jobs in ChesterCreate job alerts

Load Testing Technician / Site Testing Engineer An exciting opportunity for an Engineering Technician with experience in load testing, site-based engineering services and structural testing projects. Ideal for candidates with experience in testing equipment, technical reporting, fault finding and nationwide site work. If you’ve also worked in the following roles, we’d also like to hear from you: Site Technician, Load Testing Engineer, Field Service Engineer, Structural Testing Technician, Field Service Technician, Calibration Technician, Electrical Technician, Structural Monitoring Technician, Service Engineer, Instrumentation Technician, Maintenance Technician, Test Technician, Load Testing Technician, Site Test Engineer SALARY: £30,000 - £35,000 per annum (depending on qualifications and experience) + Benefits LOCATION: This role will involve site-based work (travelling nationwide) with a small percentage of work carried out in our Laboratory in Ellesmere Port, Cheshire, North West England (CH66) JOB TYPE: Full-Time, Permanent WORKING HOURS: Minimum 37.5 Hours per week - 6 Month Minimum Probation Period Required KEY REQUIREMENTS: Candidates MUST have a full and valid UK Driving Licence (6 points or less - no active convictions) JOB OVERVIEW We have a fantastic new job opportunity for a Load Testing Technician / Site Testing Engineer to join a growing organisation delivering specialist load testing, structural testing and on-site engineering services. As a Load Testing Technician / Site Testing Engineer you will support a wide range of nationwide site projects carrying out load testing, structural inspections, equipment setup and technical testing activities across construction and engineering environments. The Load Testing Technician / Site Testing Engineer will play an important role in preparing testing equipment, installing temporary systems, recording and analysing test data, producing technical documentation and ensuring all site activities are completed safely, efficiently and in line with project specifications. APPLY TODAY Ready to make your next career move? Apply Today for our Recruitment Team to review. DUTIES Your duties as the Load Testing Technician / Site Testing Engineer include: • Testing Operations: Carry out on-site load testing and structural testing activities across a range of engineering and construction projects, • Site Equipment Setup: Install, assemble and prepare load testing equipment, temporary systems and monitoring devices on customer sites, • Testing Support: Assist with product testing, commissioning activities and engineering inspections in both site and workshop environments, • Technical Reporting: Record, analyse and document test results and prepare technical reports for client approval, • Fault Finding: Identify equipment issues and support troubleshooting and corrective actions during testing operations, • Client Liaison: Communicate effectively with clients and site teams to ensure projects are completed efficiently and professionally, • Equipment Maintenance: Maintain, inspect and service testing equipment to ensure operational readiness and compliance, • Test Rig Assembly: Build and adapt testing rigs and support structures to meet individual project requirements, • Health and Safety Compliance: Follow all company procedures, RAMS and site safety regulations at all times, • Documentation and Record Keeping: Complete accurate site records, test documentation and daily activity logs, • Team Support: Work collaboratively with engineers, technicians and subcontractors to support successful project delivery, • Workshop and Site Housekeeping: Maintain clean, organised and safe working environments across site, workshop and storage areas CANDIDATE REQUIREMENTS Essential • GCSEs in English, Mathematics and Science, • NVQ Level 2 or Level 3 in Construction or Engineering or equivalent, • Previous experience in load testing, site engineering, structural testing or engineering support environments, • Experience working with testing equipment, fault finding and technical problem solving, • Knowledge of health and safety procedures within construction, engineering or industrial environments, • Proficiency in Microsoft Office including Word, Excel and Outlook, • Ability to work independently and collaboratively within a team, • Full UK driving licence with no more than 6 penalty points, • Strong organisational skills and attention to detail, • Degree in Construction, Engineering or a related discipline, • CSCS Card, • Experience supporting nationwide site projects, • Knowledge of structural, mechanical or electrical engineering principles BENEFITS • Holiday package of 33 days including Bank Holidays, • Pension scheme HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV’s of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14683 Full-Time, Permanent Engineering Jobs, Careers and Vacancies. Find a new job and work in Ellesmere Port, Cheshire, North West England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. AWD-IN-SPJ

1st Line Support Engineer Chester / Hybrid £27,000 + Bonus + Benefits We’re looking for a 1st Line Support Engineer to join a growing IT support team in Chester. This 1st Line Support Engineer role is ideal for someone at the early stages of their IT career who enjoys problem-solving, working with users, and building strong technical foundations. The Role – 1st Line Support Engineer As a 1st Line Support Engineer, you’ll be the first point of contact for technical issues, providing high-quality support to end users and ensuring issues are logged, resolved, or escalated efficiently. Key Responsibilities • Provide first-line technical support via phone, email, and ticketing systems as a 1st Line Support Engineer, • Log, track, and resolve support tickets in line with SLAs, • Troubleshoot hardware, software, and basic network issues, • Support Windows devices, Microsoft 365, user accounts, and permissions, • Escalate complex issues to 2nd Line / 3rd Line support where required, • Maintain accurate documentation and system records, • Deliver clear, professional customer service at all timesSkills & Experience, • Previous experience in a 1st Line Support Engineer, IT Support, or Service Desk role (or strong apprenticeship / placement experience), • Good working knowledge of Windows OS and Microsoft 365, • Basic understanding of networking, Active Directory, and user management, • Strong communication skills and a customer-focused approach, • A desire to learn, develop, and progress beyond 1st Line Support Engineer levelWhat’s on Offer, • £27,000 base salary, • Annual bonus, • Benefits package, • Structured training and development, • Clear progression from 1st Line Support Engineer into 2nd Line support

Service Engineer- Chromatography/Lab Instrumentation Location: -Chester- Site & Field based roleSalary & Benefits: -Up to £43,000 per annum, 25 days annual leave plus bank holidays, Life Insurance, Pension: 4% Employee and 5% Employer, Private Health Care (employee only), Long Service Annual Leave Accrual, Overtime where applicable & Company pool car.Our client a specialist engineering business, are looking to hire a Field Service Engineer to support customers across the gas and instrumentation sector. The role combines laboratory work with occasional site visits, offering a varied and hands-on environment.What will you be doing?• Provide technical support to clients and service engineers via phone and email • Calibrate, repair and service systems, mainly GC instrumentation • Prepare test equipment and support FATs with clients present • Assist with pre-commissioning and commissioning activities on-site and in-house • Deliver remote support for reactive maintenance • Strip down and overhaul gas analysers, regulators and control valves • Carry out PLC/flow computer programming, configuration and fault finding • Compile reports and documentation for all customer activities • Support technically complex customer orders and internal teams • Join a 24/7 helpline rota once trained • Attend training courses relevant to the position. The Person • Previous experience within a similar service role with instrumentation. • Experience or knowledge of PLCs • Strong fault-finding and diagnostic skills • Good communication skills, both written and verbal • Ability to prioritise work and meet deadlines • Educated to HNC/HND or degree in Electrical, Electronic, Mechanical Engineering or Analytical science.• Strong IT skills.Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us .

Joina leading independent technology and services provider as a technician 2Job Overview:Weare seeking an experienced CE Engineer to support End User Services, providingIMAC, Break/Fix, Moves, and Refresh services. The role involves hands-onsupport for end-user hardware, printers, and peripherals, ensuring high servicequality and adherence to organisational standards and policies.Location:Chester Business Park, Chester, CH4 9FBWorking Hours: Monday to Friday, 08:00 - 16:00 (Weekend overtime may be required)Contract Duration: • Start Date: 05 May 2026, • End Date: 31 July 2026, • Perform IMAC (Install, Move, Add, Change) activities for end-user devices., • Deliver break/fix support for desktops, thin clients, monitors, webcams, and related peripherals., • Support user moves and hardware refresh activities., • Plan and coordinate hardware refresh activities., • Deploy and configure hardware according to standard build and security policies., • Perform data backup, migration, and validation during refresh cycles., • Provide end-user support during and after deployments., • Experience in End User Computing / Deskside Support roles., • Strong knowledge of IMAC and Break/Fix support., • Hands-on experience with PC refresh and deployment projects., • Familiarity with printer maintenance and consumables handling., • Excellent customer service and communication skills. Hays Talent Solutions is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Mobile Repair Technician (Commercial Gas)Location: Chester - Mobile role across large retail sitesSalary: £42,000 + On-call retainer + Overtime - Company vehicle Join a leading facilities management team as a Mobile Repair Technician (Gas), responsible for keeping commercial gas systems safe, compliant, and operational across a portfolio of large retail environments.? The role You will travel between multiple sites within a defined region, carrying out servicing, repairs, and maintenance on a range of commercial gas appliances and systems. Working largely independently, you will plan your day, respond to reactive jobs, and complete planned preventative maintenance while delivering a high standard of customer service.? What you'll be doing * Servicing and repairing commercial gas appliances and systems in large retail environments.? * Carrying out gas testing, purging, and fault diagnosis to identify and rectify issues safely and efficiently.? * Completing planned preventative maintenance and reactive repair works in line with SLA and compliance standards.? * Ensuring all work complies with current gas safety regulations and company procedures.? * Producing accurate service reports, completion paperwork, and statutory certification.? * Supporting wider FM tasks where required as part of a multi-skilled regional team.? * Participating in a structured regional on-call rota to support out-of-hours requirements.? What we're looking for * Proven experience working with commercial gas systems in a similar mobile or site-based role.? * Valid Commercial Gas qualifications (e.g. CODNCO1, CIGA1, CORT1, TPCP1/1A or equivalent).? * Strong competence in gas testing, purging, fault-finding, and problem-solving.? * Ability to work independently, manage your own workload, and communicate clearly with clients.? * Full UK driving licence.? Desirable * F-Gas qualification - advantageous but not essential.? * Multi-trade experience (AC, electrical, or fabric) within an FM environment.? * Background in facilities management or retail maintenance.? * Willingness to undertake further training and upskilling.? What's on offer * Structured on-call rota with retainer and enhanced overtime rates.? * Seasonal call-out demand offering additional earning potential.? * Company vehicle provided, fitted with safety monitoring equipment.? * Support for further qualifications and upskilling where appropriate (subject to experience and business need).? How to apply If you're an experienced Commercial Gas Engineer or Mobile Repair Technician looking for a stable role with variety, autonomy, and long-term development, we'd like to hear from you. Please apply with your CV or contact Maria Vasileva for a confidential discussion.? INDENG DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality

Service Engineer | UK-based with travel across the UK & Europe About the Company Our client is a well-established and highly respected engineering business operating across the UK and Europe. They specialise in delivering bespoke industrial equipment and solutions, supporting customers from initial design through to installation, maintenance, and ongoing technical support. With a strong reputation for quality, innovation, and customer service, they continue to grow within their sector. The Opportunity We are recruiting on behalf of our client for a Field Service & Installation Engineer to join their expanding team. This is a varied and hands-on role, ideal for someone who enjoys a mix of workshop-based work, site installations, and international travel. You will be instrumental in supporting customers by ensuring equipment is assembled, installed, and maintained to the highest standards, while also playing a key role in troubleshooting and continuous improvement activities. Key Responsibilities • Carry out pre-assembly of machinery within the UK workshop, ensuring all builds meet required specifications and deadlines, • Lead and support installation and commissioning activities at customer sites across the UK and Europe, • Provide both on-site and remote technical support, • Conduct planned preventative maintenance (PPM), fault finding, and repairs, • Respond to breakdowns efficiently and implement corrective actions, • Interpret and work from mechanical and technical drawings, • Plan and install PVC pipework systems as required, • Maintain workshop tools and ensure a clean, safe working environment, • Build and maintain strong working relationships with customers, always representing the business professionally, • Ensure all work complies with health & safety standards, including completing risk assessments and method statements, • Complete service reports and maintain accurate technical documentation, • Support design and development improvements in collaboration with engineering teams, • Provide guidance and training to customers or junior staff when needed, • Previous experience in a field service or engineering environment, • Level 3 qualification in an engineering discipline (preferred), • Strong mechanical knowledge, including hydraulics and pneumatics, • Experience working with pumps, filtration systems, or PVC pipework is advantageous, • Ability to read and interpret technical drawings, • Hands-on experience with maintenance, fault finding, and repairs, • Competent with engineering tools and equipment, • Comfortable using Microsoft Office and completing technical reports, • IPAF licence (desirable), • Practical, detail-focused, and hands-on approach, • Strong analytical and problem-solving skills, • Customer-focused with a proactive and solutions-driven mindset, • Excellent communication and interpersonal skills, • Ability to work independently and as part of a team, • Forward-thinking with strong planning and organisational skills, • Opportunity to work on diverse and technically challenging projects, • Regular travel across the UK and Europe, • A supportive and collaborative working environment, • Ongoing development opportunities within a growing organisation

Mechanical Design EngineerLocation: North West EnglandEmployment Type: Full-timeOverviewWe are seeking a talented Mechanical Design Engineer to join a leading provider of advanced automation solutions for aerospace and industrial manufacturing. The successful candidate will contribute to the design and development of innovative mechanical systems and tooling used in automated production environments.Key Responsibilities • Mechanical system design: Develop detailed mechanical designs and assemblies for automation equipment using CAD software., • Concept development: Collaborate with cross-functional teams to translate customer requirements into robust engineering solutions., • Technical documentation: Produce accurate drawings, BOMs, and specifications for manufacturing and assembly., • Design validation: Conduct design reviews, tolerance analysis, and ensure compliance with relevant standards., • Continuous improvement: Support product optimisation and contribute to process efficiency initiatives., • Degree in Mechanical Engineering or a related discipline., • Proficiency in 3D CAD tools (e.g., Siemens NX, SolidWorks, or CATIA)., • Strong understanding of materials, manufacturing processes, and mechanical design principles., • Experience in automation or aerospace sectors is advantageous., • Competitive salary: £40,000-£50,000 depending on experience., • Career progression: Clear growth pathways within a global engineering group., • European networking: Opportunities to collaborate and build relationships with engineering teams across Europe., • Innovative environment: Work on cutting-edge automation projects shaping the future of advanced manufacturing.

Vital Power Group is one of the fastest-growing, forward-thinking companies in the UK, dedicated to delivering innovative solutions within the critical power and EV charging industries. Our vision is to become the most trusted turnkey solutions partner within both industries, by re-setting customer service benchmarks and transforming customer expectations with honesty, integrity, and passion. Powered by a team of approximately 80 dedicated employees across the UK, Vital Power Group is focused on ambitious growth. Offering a wide range of business and engineering roles, we provide an ideal environment for those eager to contribute to the rapidly evolving landscapes of critical power and EV charging solutions. This role is based in our Chester office, operating Monday to Friday 8.30am to 5pm. As an Internal Account Manager you will be responsible for nurturing and maintaining key customer accounts; resolving any client queries or concerns ensuring customer expectation is consistently managed. This includes quoting and closing potential sales opportunities from a mixture of activities. Following up on existing leads in order to convert into sales for the company as well as developing opportunities where appropriate by regularly chasing through quotations and logging their status on the CRM. You will ensure all agreed KPIs are met and all performance related data analysis is kept up to date, holding regular account reviews with key accounts. Roles & Responsibilities: • Create quotations based on engineer reports, new enquiries & renewal service contracts amongst all other customer enquiries., • To make outbound sales calls via telephone to prospective & existing customers, • To make outbound contact via email/social media platforms to existing customers to develop and maintain customer relationships, • Nurturing and developing key accounts by identifying target business/market opportunities for lead generation within existing client base, • Population of company CRM with sales opportunities, including follow up actions to maximise sales, • To develop a good knowledge and understanding of the industry and our services to allow more productive sales calls to be completed, • To track sales targets based on agreed team KPIs, regularly monitoring account performance, • To maintain any relevant customer KPI / performance review documentation, • Hold regular performance review meetings with key accounts to ensure their expectations are met, • To focus on achieving individual and team objectives and communicate performance to your line manager identifying any potential areas of growth, • To work positively and communicate professionally across the team, providing an effective contribution to work tasks, • To manage your own personal development and provide opportunities for career development within the business Person Specification Criteria - Education, Qualifications & Experience: Essential: • Good level of general education, • Excellent organisational skills, • Previous experience of working in a professional environment, • Computer literate with experience of Microsoft Office (predominately Word and Excel), • Excellent communication, verbal and written skills, • Ability to manage own workload and establish priorities, • Experience of working effectively as part of a team as well as independently, • Ability to solve problems with a positive attitude, • Self-motivated and able to learn quickly, • Strong attention to detail with high levels of accuracy Desirable: • Previous experience in a similar role, • Exposure to aftersales and/or a sales environment What you can expect: • A twice per annum, ‘Profit Related Pay’ scheme that ties bonus amounts to the amount of profit made by the business., • Pension scheme after 3 months of service., • All employees receive 25 days leave (or equivalent pro-rata) per annum and additional bank holiday days., • Eligibility to join Vitality, Private Healthcare Scheme, and BHSF Healthcare Cash Plan, after 6 months of service., • Investment in professional development and training to support you in your role., • A supportive and positive workplace culture Next Steps: We are an equal opportunities employer. We welcome applications from all suitably qualified persons. If you require any additional support to attend an interview, please let us know in advance. The role is due to commence ASAP after the offer has been made, but we can be flexible with the start date depending on prior commitments. Please note that proof of the right to work in the UK will be required.

Job Title: Graduate Applications Engineer Salary: £28,000-£32,000 Location: Chester Key Responsibilities • Provide technical support and application guidance to customers and internal teams, • Assist customers in identifying suitable engineering products and solutions, • Support troubleshooting and resolution of technical issues, • Prepare technical documentation, quotations, reports, and application data, • Collaborate with engineering, production, and sales departments, • Participate in customer meetings, product demonstrations, and technical presentations, • Support testing, validation, and continuous improvement activities, • Maintain accurate customer and project records, • Develop strong product and industry knowledge Essential • Degree qualified in Mechanical Engineering, Electrical Engineering, Electronic Engineering, Mechatronics, or similar engineering discipline, • Strong communication and interpersonal skills, • Good analytical and problem-solving ability, • Ability to manage multiple tasks and priorities, • Competent with Microsoft Office applications, • Positive attitude and willingness to learn Desirable • Placement year, internship, or industry project experience, • Exposure to manufacturing, automation, or industrial engineering environments, • Experience using SolidWorks, CAD or engineering software packages, • Customer-facing or technical support experience

Morson are working with the UK's leading aerospace manufacturer and they are looking for a Shopfloor Engineer to join the team In Chester. Tasks • Accompany the production team / Autonomous Production Team (APT)., • Supports in identifying, analysing and solving technical issues not directly manageable by the Operators & First Line Manager (FLM)., • Provides an E2E perspective at the shopfloor level within the production team / APT., • Supports continuous production enablement by efficiently utilising available resources & knowledge, • Contributes to the Operational Excellence targets within her/his area by adhering to the continuous improvement of operational processes. As the successful candidate you will be able to demonstrate the following skills and competencies: • HNC qualification would be desirable, • Manufacturing engineering experience required, • Experience working to regulatory requirements and constraints., • Project management, • Communication skills, • Autonomy, adaptability, and proactivity, • Ensure Customer Focus, • Ensure Product Safety AMRT1_UKTJ<...

Are you a Calibration Engineer seeking to join the world's leading calibration services company, offering flexible work options and excellent career growth opportunities? If so, we have an exciting opportunity for you as a Calibration Engineer at one of our sites across the UK. You will be responsible for undertaking various activities and calibrations to Customers' specifications, ISO17025 and ISO9001 in accordance with Company Procedures, UKAS regulations, and recognised specifications. You will maintain small dimensional tooling, identify and develop productivity improvement opportunities, participate in customer surveillance and accreditation audits, and provide technical support to customers and colleagues on request in line with capabilities. • Competitive salary, • Continuous development and training plan, • 25 days holiday and the option to buy/sell days, • Flexible working options, • Access to the Trescal PerksHub, • Employee well-being programme, • Medical Health Cash Plan, • Pension and Life Assurance Scheme, • Cycle to work scheme, • Gym membership discounts Have previous experience working within a similar environment. An understanding of calibration practices and theories is advantageous. Experience of working within...

Wing Build Support Engineer Within the Broughton Wing Plant Engineering Team (PET) we are looking to recruit Build Support Engineer supporting the Single Aisle (SA) Component Delivery Teams (CDT). The successful applicant will be part of our fast moving teams who deliver high quality Build Support to meet the needs of the Plant. The teams function is to provide reactive and proactive engineering support to the CDTs to ensure the achievement of their business objectives. The team also looks to identify opportunities to optimise the design and industrial system in partnership with Manufacturing Engineering to promote a true MEET (Manufacturing Engineering and Engineering Together) ethos. Aspects of the Role Tangible Deliverables to Time, Cost and Quality: ? Act as the link and integrate between Engineering and Manufacturing, ensuring co-design solutions which are suitable for the industrial system whilst maintaining an engineering and most important customer perspective ? Support the design definition and communicate the industrial requirements into the wider engineering community. ? Provide ‘lineside' build support and act as the focal point for any Engineering topics within the Wing Plant CDTs including root cause analysis investigations into all abnormalities arising from design queries. ? Provide proactive product improvement which supports modifications to reduce Recurring Costs, ...

New Job Opportunity - Quality Lineside Engineer (Onsite, in Broughton, UK) An exciting contract opportunity has arisen for a Quality Engineer (Lineside) to join our client's Quality team based onsite in Broughton. This Quality Engineer role sits at the heart of a high-volume manufacturing environment, where quality, safety and customer focus are critical. Job Overview As a Quality Engineer (lineside), you'll play a key role in assuring product and process conformity, supporting operational teams and driving corrective and preventative actions. This is an excellent opportunity for an experienced Quality Engineer who thrives in a fast-paced, collaborative setting and enjoys being close to the production line. Key Responsibilities Providing specialist quality support and advice on drawings, parts, processes and support services Independently assuring that quality requirements are met Conducting surveillance activities to ensure adherence to the quality management system Ensuring certification processes are clearly defined and consistently applied Coordinating and leading quality and technical issue resolution using multifunctional teams Performing initial investigations into non-conformances, events and quality issues to identify root cause Driving corrective and preventative actions through structured problem-solving techniques Investigating deficiencies identified during process confirmation activities Compiling and pre...

Mechanical Design EngineerLocation: North West England Employment Type: Full-time OverviewWe are seeking a talented Mechanical Design Engineer to join a leading provider of advanced automation solutions for aerospace and industrial manufacturing. The successful candidate will contribute to the design and development of innovative mechanical systems and tooling used in automated production environments. Key Responsibilities Mechanical system design: Develop detailed mechanical designs and assemblies for automation equipment using CAD software. Concept development: Collaborate with cross-functional teams to translate customer requirements into robust engineering solutions. Technical documentation: Produce accurate drawings, BOMs, and specifications for manufacturing and assembly. Design validation: Conduct design reviews, tolerance analysis, and ensure compliance with relevant standards. Continuous improvement: Support product optimisation and contribute to process efficiency initiatives. Collaboration: Work closely with project managers, electrical engineers, and manufacturing teams to ensure seamless integration of mechanical systems.Qualifications Degree in Mechanical Engineering or a related discipline. Proficiency in 3D CAD tools (e.g., Siemens NX, SolidWorks, or CATIA). Strong understanding of materials, manufacturing processes, and mechanical design principles. Experience in automation or aerospace sectors is advantageous. Exc...

Mobile Repair Technician (Commercial Gas) Location: Chester - Mobile role across large retail sites Salary: £42,000 + On-call retainer + Overtime - Company vehicle Join a leading facilities management team as a Mobile Repair Technician (Gas), responsible for keeping commercial gas systems safe, compliant, and operational across a portfolio of large retail environments. The role You will travel between multiple sites within a defined region, carrying out servicing, repairs, and maintenance on a range of commercial gas appliances and systems. Working largely independently, you will plan your day, respond to reactive jobs, and complete planned preventative maintenance while delivering a high standard of customer service. What you'll be doing Servicing and repairing commercial gas appliances and systems in large retail environments. Carrying out gas testing, purging, and fault diagnosis to identify and rectify issues safely and efficiently. Completing planned preventative maintenance and reactive repair works in line with SLA and compliance standards. Ensuring all work complies with current gas safety regulations and company procedures. Producing accurate service reports, completion paperwork, and statutory certification. Supporting wider FM tasks where required as part of a multi-skilled regional team. Participating in a structured regional on-call rota to support out-of-hours requirements. What we're looking for Proven experience working with commercial gas systems in a similar mobile or site-based role. Valid Commercial Gas qualifications (e.g. CODNCO1, CIGA1, CORT1, TPCP1/1A or equivalent). Strong competence in gas testing, purging, fault-finding, and problem-solving. Ability to work independently, manage your own workload, and communicate clearly with clients. Full UK driving licence. Desirable F-Gas qualification - advantageous but not essential. Multi-trade experience (AC, electrical, or fabric) within an FM environment. Background in facilities management or retail maintenance. Willingness to undertake further training and upskilling. What's on offer Structured on-call rota with retainer and enhanced overtime rates. Seasonal call-out demand offering additional earning potential. Company vehicle provided, fitted with safety monitoring equipment. Support for further qualifications and upskilling where appropriate (subject to experience and business need). How to apply If you're an experienced Commercial Gas Engineer or Mobile Repair Technician looking for a stable role with variety, autonomy, and long-term development, we'd like to hear from you. Please apply with your CV or contact Mat Holliday for a confidential discussion. INDENG DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality

Compressed Air Engineer – Chester Location: Chester Job Type: Full-Time Salary: £32,000 - £47,000 (dependent on experience and qualifications) On Target Earnings: £35,000 - £55,000+ per annum Due to continued growth, there is an opportunity for a Service Technician to carry out maintenance and installation work on compressed air systems across the UK. This includes air compressors, air treatment, control systems, pipework, welding and fabrication, refrigeration (FGAS), and nitrogen generation. Responsibilities: Perform servicing, maintenance, and installation work on compressed air systems, including air compressors, control systems, pipework, and air treatment controls. Diagnose and resolve faults to ensure systems operate efficiently. Work independently and as part of a team, delivering a high standard of service. Complete reports and maintain accurate job records. Provide technical support and maintain strong customer relationships. Requirements: Previous experience working with compressed air systems is essential. A minimum of five years’ experience is preferred, though applications with less experience will be considered. A Level 3 qualification in a mechanical or electrical engineering discipline is desirable but not essential. A proactive and self-motivated approach with a focus on delivering high-quality work. Willingness to work unsociable hours when required. A full UK driving licence is required. Benefits: Paid overtime Monthly performance-related bonus Company vehicle Contributory pension (up to 5% matched company contribution) Company-funded healthcare plan (including family cover) Company mobile and tablet/PDA 22 days annual leave plus bank holidays (with an additional day for every three years’ service, up to a maximum of 27 days) Call-out shift rota (1 in every 5 weeks) Monday to Friday working hours (8:00 am – 4:30 pm) Smart Search Technical is a specialist recruitment company operating in technical engineering sectors across the UK & beyond. Founded in 2024, our mission is to simplify the recruitment process for both job seekers and employers, leveraging our extensive knowledge, connections and experience. By applying for this position, you consent to be contacted by our organisation if your qualifications align with the requirements for any role we represent

Medical Field Service Engineer (Pathology Laboratory Diagnostics) Overall Earnings £60,000+ Basic Salary £50,000 Bonus £6,500 Company Car (electric / hybrid options available) Excellent Benefits Package An excellent opportunity for experienced Service Engineers from a range of electronics systems backgrounds to join a market leading supplier of Autoimmune Diagnostics, Immunology, Biochemistry, Haematology, Histology, Microbiology, Immunodiagnostics Systems and Reagents The Role – Medical Field Service Engineer (Pathology Laboratory Diagnostics) This market leader seeks to recruit a technically motivated and customer focused Medical Field Service Engineer, responsible for: The service, installation, breakdown, repair and calibration of a wide range of sophisticated medical laboratory diagnostics systems, utilised within pathology departments, NHS laboratories and clinical chemistry environments The successful applicants will support clinical chemistry and blood diagnostics products located at customer sites Your Background – Medical Field Service Engineer (Pathology Laboratory Diagnostics) To succeed in this exciting role, you must be able to demonstrate: A competent background in a customer facing field service engineering capacity gained within any high value capital equipment environment Applications are encouraged from engineers with a broad range of backgrounds, including laboratory device, medical device, pharmaceutical device, ex forces engineers (medical & dental, weapons systems, radar) and a wide range of other electronic or electro-mechanical from other sectors Engineers with experience of the diagnostics field, including autoimmune diagnostics, immunology, biochemistry, haematology, histology, microbiology and immunodiagnostics systems are also encouraged to register their interest A qualification in engineering, electronics or a science based subject to a minimum of ONC level Applicants are welcome from field service engineers from a broad base of sectors, as full and comprehensive product training will be provided The Company – Medical Field Service Engineer (Pathology Laboratory Diagnostics) Well respected supplier of sophisticated medical diagnostics systems, trusted by healthcare professionals to accurately diagnose and test patients for a wide range of medical conditions and diseases This instantly recognisable brand leader supplies a wide range of innovative diagnostic based laboratory and medical systems to the healthcare sector, and offers 'best in class' solutions across their range of products and systems, which include applications for microbiology, immunodiagnostics, molecular diagnostics and blood bank screening Supported by a truly multi-national 'blue-chip' technology group with representation in over 150 countries, their commitment to investment in Research and Development is second to none in their industry, ensuring that they remain a market leader At the core of their business lie product innovation, excellent customer service and good people This vacancy is being advertised by TRS Consulting. The services advertised by TRS Consulting are those of an employment agency and / or employment business

More About The Role Our sites are ever-demanding, complex and in some cases operate 24 hours a day - so it's vital we have a strong Engineering team who ensure our machines work to the best of their ability. So we can continue to provide great products to our customers, whilst still ensuring speediness. As a Multi Skilled Maintenance Engineer, you will play a vital role in ensuring the smooth operation of our Manufacturing site. You will be responsible for the maintenance, repair, and improvement of our machinery and equipment, ensuring minimal downtime and maximum efficiency. This is a hands-on role that requires strong technical skills and the ability to troubleshoot and solve problems quickly. Reporting to the Site Engineering Manager your responsibilities will include: * Conduct routine inspections and preventive maintenance on production equipment, identifying and resolving any potential issues before they cause disruptions * Respond promptly to machinery breakdowns, diagnose the problem, and perform repairs or coordinate with external specialists when necessary * Carry out machine adjustments and changeovers to support production line efficiency and minimise downtime * Monitor and calibrate equipment to ensure accuracy, quality, and safety standards are met * Collaborate with production teams to identify opportunities for process improvement and provide technical expertise to enhance productivity * Keep accurate records of maintenance activities, including maintenance schedules, repairs, and spare parts inventory * Adhere to health and safety guidelines and ensure compliance with company policies and procedures * Stay updated with industry advancements and new technologies relevant to the role About You As well as the ability to work at pace, we're also looking for someone who has: * Qualifications to NVQ level 3 (or equivalent, ONC mechanical/electrical engineering, BTEC level 3 in mechanical & electrical/electronic engineering) * Strong knowledge of mechanical and electrical systems used in FMCG industry * Proficient in troubleshooting and repairing industrial machinery, including conveyors, motors, pumps, and packaging equipment * Proactive approach to maintenance and a commitment to ensuring the highest levels of equipment reliability * A good understanding of HACCP principles and ideally IEE qualification up to 17th edition wiring regulations would be advantageous * Excellent communication skills * Assertiveness with the ability to make decisions on the spot * A can do attitude and a strong work ethic In return for your hard work we will offer you: * Six weeks holiday (including bank holidays) * 15% discount in our stores available from the day you join us * Additional 10% discount card for a friend or family member * Career progression and development opportunities * Subsidised staff canteen * Free parking * Market leading pension and life assurance * Healthcare/Well-being benefits including Aviva Digital GP * Morrisons MyPerks with discounts at high street shops, cinemas and gyms, and lots more * Long Service Awards * Optional Payroll charity donations * Enhanced Family/maternity/parental leave About The Company You’ll find a great big welcome here at Myton Food Group - the part of our business that looks after manufacturing, whilst maintaining strong roots within Morrisons Supermarkets. At Myton Food Group, we have a legacy to be proud of. We’re British farming’s biggest single direct customer. We buy from highly valued suppliers. And we’re passionate about the quality of our food. Today, we have 19 manufacturing sites across the UK, where we pack and process fresh meats and fish, savoury and sweet pies, fruit and veg, flower bouquets, bread and lots more. We really do stand out in the world of food manufacturing. But what we’re especially proud of is the way we all get stuck in and work as a team, in partnership across our supply chain. Read more about what we do at our Myton Food Group website

More About The Role Our sites are ever-demanding, complex and in some cases operate 24 hours a day - so it's vital we have a strong Engineering team who ensure our machines work to the best of their ability. So we can continue to provide great products to our customers, whilst still ensuring speediness. As a Electrical Maintenance Engineer, you will play a vital role in ensuring the smooth operation of our Manufacturing site. You will be responsible for the maintenance, repair, and improvement of our machinery and equipment, ensuring minimal downtime and maximum efficiency. This is a hands-on role that requires strong technical skills and the ability to troubleshoot and solve problems quickly. Reporting to the Site Engineering Manager your responsibilities will include: * Conduct routine inspections and preventive maintenance on production equipment, identifying and resolving any potential issues before they cause disruptions * Respond promptly to machinery breakdowns, diagnose the problem, and perform repairs or coordinate with external specialists when necessary * Carry out machine adjustments and changeovers to support production line efficiency and minimise downtime * Monitor and calibrate equipment to ensure accuracy, quality, and safety standards are met * Collaborate with production teams to identify opportunities for process improvement and provide technical expertise to enhance productivity * Keep accurate records of maintenance activities, including maintenance schedules, repairs, and spare parts inventory * Adhere to health and safety guidelines and ensure compliance with company policies and procedures * Stay updated with industry advancements and new technologies relevant to the role About You As well as the ability to work at pace, we're also looking for someone who has: * Qualifications to NVQ level 3 (or equivalent, ONC electrical engineering, BTEC level 3 in electrical/electronic engineering) * Strong knowledge of mechanical and electrical systems used in FMCG industry * Proficient in troubleshooting and repairing industrial machinery, including conveyors, motors, pumps, and packaging equipment * Proactive approach to maintenance and a commitment to ensuring the highest levels of equipment reliability * A good understanding of HACCP principles and ideally IEE qualification up to 17th edition wiring regulations would be advantageous * Excellent communication skills * Assertiveness with the ability to make decisions on the spot * A can do attitude and a strong work ethic In return for your hard work we will offer you: * Six weeks holiday (including bank holidays) * 15% discount in our stores available from the day you join us * Additional 10% discount card for a friend or family member * Career progression and development opportunities * Subsidised staff canteen * Free parking * Market leading pension and life assurance * Healthcare/Well-being benefits including Aviva Digital GP * Morrisons MyPerks with discounts at high street shops, cinemas and gyms, and lots more * Long Service Awards * Optional Payroll charity donations * Enhanced Family/maternity/parental leave About The Company You’ll find a great big welcome here at Myton Food Group - the part of our business that looks after manufacturing, whilst maintaining strong roots within Morrisons Supermarkets. At Myton Food Group, we have a legacy to be proud of. We’re British farming’s biggest single direct customer. We buy from highly valued suppliers. And we’re passionate about the quality of our food. Today, we have 19 manufacturing sites across the UK, where we pack and process fresh meats and fish, savoury and sweet pies, fruit and veg, flower bouquets, bread and lots more. We really do stand out in the world of food manufacturing. But what we’re especially proud of is the way we all get stuck in and work as a team, in partnership across our supply chain. Read more about what we do at our Myton Food Group website

Load Testing Technician / Site Testing Engineer An exciting opportunity for an Engineering Technician with experience in load testing, site-based engineering services and structural testing projects. Ideal for candidates with experience in testing equipment, technical reporting, fault finding and nationwide site work. If you’ve also worked in the following roles, we’d also like to hear from you: Site Technician, Load Testing Engineer, Field Service Engineer, Structural Testing Technician, Field Service Technician, Calibration Technician, Electrical Technician, Structural Monitoring Technician, Service Engineer, Instrumentation Technician, Maintenance Technician, Test Technician, Load Testing Technician, Site Test Engineer SALARY: £30,000 - £35,000 per annum (depending on qualifications and experience) + Benefits LOCATION: This role will involve site-based work (travelling nationwide) with a small percentage of work carried out in our Laboratory in Ellesmere Port, Cheshire, North West England (CH66) JOB TYPE: Full-Time, Permanent WORKING HOURS: Minimum 37.5 Hours per week - 6 Month Minimum Probation Period Required KEY REQUIREMENTS: Candidates MUST have a full and valid UK Driving Licence (6 points or less - no active convictions) JOB OVERVIEW We have a fantastic new job opportunity for a Load Testing Technician / Site Testing Engineer to join a growing organisation delivering specialist load testing, structural testing and on-site engineering services. As a Load Testing Technician / Site Testing Engineer you will support a wide range of nationwide site projects carrying out load testing, structural inspections, equipment setup and technical testing activities across construction and engineering environments. The Load Testing Technician / Site Testing Engineer will play an important role in preparing testing equipment, installing temporary systems, recording and analysing test data, producing technical documentation and ensuring all site activities are completed safely, efficiently and in line with project specifications. APPLY TODAY Ready to make your next career move? Apply Today for our Recruitment Team to review. DUTIES Your duties as the Load Testing Technician / Site Testing Engineer include: • Testing Operations: Carry out on-site load testing and structural testing activities across a range of engineering and construction projects, • Site Equipment Setup: Install, assemble and prepare load testing equipment, temporary systems and monitoring devices on customer sites, • Testing Support: Assist with product testing, commissioning activities and engineering inspections in both site and workshop environments, • Technical Reporting: Record, analyse and document test results and prepare technical reports for client approval, • Fault Finding: Identify equipment issues and support troubleshooting and corrective actions during testing operations, • Client Liaison: Communicate effectively with clients and site teams to ensure projects are completed efficiently and professionally, • Equipment Maintenance: Maintain, inspect and service testing equipment to ensure operational readiness and compliance, • Test Rig Assembly: Build and adapt testing rigs and support structures to meet individual project requirements, • Health and Safety Compliance: Follow all company procedures, RAMS and site safety regulations at all times, • Documentation and Record Keeping: Complete accurate site records, test documentation and daily activity logs, • Team Support: Work collaboratively with engineers, technicians and subcontractors to support successful project delivery, • Workshop and Site Housekeeping: Maintain clean, organised and safe working environments across site, workshop and storage areas CANDIDATE REQUIREMENTS Essential • GCSEs in English, Mathematics and Science, • NVQ Level 2 or Level 3 in Construction or Engineering or equivalent, • Previous experience in load testing, site engineering, structural testing or engineering support environments, • Experience working with testing equipment, fault finding and technical problem solving, • Knowledge of health and safety procedures within construction, engineering or industrial environments, • Proficiency in Microsoft Office including Word, Excel and Outlook, • Ability to work independently and collaboratively within a team, • Full UK driving licence with no more than 6 penalty points, • Strong organisational skills and attention to detail, • Willingness to travel nationwide, work flexible hours and stay away when required Desirable • Degree in Construction, Engineering or a related discipline, • CSCS Card, • Experience supporting nationwide site projects, • Knowledge of structural, mechanical or electrical engineering principles BENEFITS • Holiday package of 33 days including Bank Holidays, • Pension scheme HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV’s of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14683 Full-Time, Permanent Engineering Jobs, Careers and Vacancies. Find a new job and work in Ellesmere Port, Cheshire, North West England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online | AWD-IN-SPJ

Our client has an opportunity for a Technical Shopfloor Engineer to join them on a 12 month contract. You will be accompanying the production team in identifying and analysing technical issues. Role: Technical Shopfloor Engineer Location: Broughton, Flintshire Hours: Alternating weeks of mornings and afternoons: Monday to Friday Mornings - 6:00am - 1:10pm / Afternoons - 1:30pm - 8:40pm Clearance: BPSS required to start Hourly Rate: £40.13 per hour via Umbrella, inside IR35 + a 20% shift uplift What you'll be doing: Accompany the production team / Autonomous Production Team (APT). Supports in identifying, analysing and solving technical issues not directly manageable by the Operators & First Line Manager (FLM). Provides an E2E perspective at the shopfloor level within the production team / APT in Airbus. Supports continuous production enablement by efficiently utilising available resources & knowledge Contributes to the Operational Excellence targets within her/his area by adhering to the continuous improvement of operational processes. Support in identifying Non-Conformance on the shopfloor. Requirements: Technical lineside/shopfloor experience Either an NVQ Level 4 OR vast experience in lineside within automation Manufacturing engineering experience required Experience working to regulatory requirements and constraints. Project management Communication skills Autonomy, adaptability, and proactivity Ensure Customer Focus Ensure Product Safety Support Nonconformity reduction activity Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Service & Commissioning Engineer Location: Chester Are you confident fault-finding on complex instrumentation? Do you enjoy a mix of lab-based work and site commissioning? Looking for a role where no two days are the same? What's in it for you £43,000 salary 25 days annual leave plus bank holidays Life Insurance Pension: 4% Employee and 5% Employer Private Health Care (employee only) Long Service Annual Leave Accrual Overtime where applicable What will you be doing? Provide technical support to clients and service engineers via phone and email Calibrate, repair and service systems, mainly GC instrumentation Prepare test equipment and support FATs with clients present Assist with pre-commissioning and commissioning activities on-site and in-house Deliver remote support for reactive maintenance Strip down and overhaul gas analysers, regulators and control valves Carry out PLC/flow computer programming, configuration and fault finding Compile reports and documentation for all customer activities Support technically complex customer orders and internal teams Join a 24/7 helpline rota once trained Where you'll be doing it You'll be working for a specialist engineering business supporting customers across the gas and instrumentation sector. The role combines laboratory work with occasional site visits, offering a varied and hands-on environment. What you'll need Minimum 2 years' experience in a technical role within the gas industry Experience or knowledge of PLCs Strong fault-finding and diagnostic skills Good communication skills, both written and verbal Ability to prioritise work and meet deadlines HNC/HND in Electrical, Electronic or Mechanical Engineering (or similar experience) GCSEs including Maths, English and Science Comfortable using Microsoft Office Desirable: Experience with odourisation systems or chromatography 18th Edition / Inspection & Test / Compex Project or order management experience We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here. TPBN1_UKTJ

Lift Service Engineer Cheshire Salary: Up to £47,000 Are you a Lift Service Engineer looking to take the next step in your career? If the answer is Yes, please read on. We are a well-known and established Lift Service, Installation and Repair company. Due to our ever-growing lift service portfolio, we are looking for a Lift Service Engineer to cover the Cheshire . Key Responsibilities of the successful Lift Service Engineer: Management of your own lift service route inCheshire Attend lift breakdowns and undertake planned servicing and maintenance work. Providing Service and PPM work at customer sites Provide technical support and advice to customers andmaximise the first-time fix rate Travelling throughout the coverage area in Cheshire Key requirements of the successful Lift Service Engineer: NVQ Level 3 qualified in Lift Engineering 2 years of experience in a Lift Service / Maintenance Engineer position Relevant qualifications for the position, e.g. J Modules Proficient with fault finding, diagnosis and repair on either/both Passenger and Goods lifts Self-motivated, reliable, and organised Full UK driving licence and prepared to travel with the role If you are interested in this Lift Service Engineer opportunity, please use the application link indoth TPBN1_UKTJ

Industrious Recruitment are seeking a Field Based Engineer to cover the Chester area. This is an exciting opportunity to join a leading company within their field. Duties: To achieve Company KPI’s of First Time Fix Rate. To achieve Company KPI’s for Mean Time Between Failure. To achieve Company KPI’s of Car Stock accuracy. To achieve Company KPI’s of implementation of ECR’s and TB’s. To achieve Company KPI’s of performing PMI’s promptly. To provide effective Technical Phone Support. To provide 1st level IT support for any products that are part of the companies customer solution. Work hand in hand with customer IT team to maintain and manage the customer IT solution FSE’s must ensure that they introduce themselves to the senior member of the client staff at the start of each site visit. Confirmation of fault details / circumstances etc. must be ascertained prior to commencing work on the equipment If work is required on another analyser at site being attended, then admin must be informed prior to any work taking place. Customer must be periodically kept informed of any changes to estimated completion time. You should communicate with your Regional Field Service Manager (RFSM) at least weekly to keep abreast of activity in your area. Essential Requirements Must hold a full driving licence HND (HNC with relevant experience) or equivalent in electronic and mechanical engineering Hydraulic and pneumatic principles Exceptional technical fault-finding skills The ability to read and understand technical diagrams Customer focused – should strive to exceed customer requirements Good and effective written and verbal communicator Job flexibility & willingness to travel – support of peers and juniors throughout the UK, Ireland and Northern Ireland may be required Good working knowledge in MS Windows Track record of supporting IT as part of the provided solution Network certification General knowledge in MS Office products, Outlook, Word, Excel and PowerPoint

Load Testing Technician / Site Testing Engineer An exciting opportunity for an Engineering Technician with experience in load testing, site-based engineering services and structural testing projects. Ideal for candidates with experience in testing equipment, technical reporting, fault finding and nationwide site work. If youve also worked in the following roles, wed also like to hear from you: Site Technician, Load Testing Engineer, Field Service Engineer, Structural Testing Technician, Field Service Technician, Calibration Technician, Electrical Technician, Structural Monitoring Technician, Service Engineer, Instrumentation Technician, Maintenance Technician, Test Technician, Load Testing Technician, Site Test Engineer SALARY: £30,000 - £35,000 per annum (depending on qualifications and experience) + Benefits LOCATION: This role will involve site-based work (travelling nationwide) with a small percentage of work carried out in our Laboratory in Ellesmere Port, Cheshire, North West England (CH66) JOB TYPE: Full-Time, Permanent WORKING HOURS: Minimum 37.5 Hours per week - 6 Month Minimum Probation Period Required KEY REQUIREMENTS: Candidates MUST have a full and valid UK Driving Licence (6 points or less - no active convictions) JOB OVERVIEW We have a fantastic new job opportunity for a Load Testing Technician / Site Testing Engineer to join a growing organisation delivering specialist load testing, structural testing and on-site engineering services. As a Load Testing Technician / Site Testing Engineer you will support a wide range of nationwide site projects carrying out load testing, structural inspections, equipment setup and technical testing activities across construction and engineering environments. The Load Testing Technician / Site Testing Engineer will play an important role in preparing testing equipment, installing temporary systems, recording and analysing test data, producing technical documentation and ensuring all site activities are completed safely, efficiently and in line with project specifications. APPLY TODAY Ready to make your next career move? Apply Today for our Recruitment Team to review. DUTIES Your duties as the Load Testing Technician / Site Testing Engineer include: Testing Operations: Carry out on-site load testing and structural testing activities across a range of engineering and construction projects Site Equipment Setup: Install, assemble and prepare load testing equipment, temporary systems and monitoring devices on customer sites Testing Support: Assist with product testing, commissioning activities and engineering inspections in both site and workshop environments Technical Reporting: Record, analyse and document test results and prepare technical reports for client approval Fault Finding: Identify equipment issues and support troubleshooting and corrective actions during testing operations Client Liaison: Communicate effectively with clients and site teams to ensure projects are completed efficiently and professionally Equipment Maintenance: Maintain, inspect and service testing equipment to ensure operational readiness and compliance Test Rig Assembly: Build and adapt testing rigs and support structures to meet individual project requirements Health and Safety Compliance: Follow all company procedures, RAMS and site safety regulations at all times Documentation and Record Keeping: Complete accurate site records, test documentation and daily activity logs Team Support: Work collaboratively with engineers, technicians and subcontractors to support successful project delivery Workshop and Site Housekeeping: Maintain clean, organised and safe working environments across site, workshop and storage areas CANDIDATE REQUIREMENTS Essential GCSEs in English, Mathematics and Science NVQ Level 2 or Level 3 in Construction or Engineering or equivalent Previous experience in load testing, site engineering, structural testing or engineering support environments Experience working with testing equipment, fault finding and technical problem solving Knowledge of health and safety procedures within construction, engineering or industrial environments Proficiency in Microsoft Office including Word, Excel and Outlook Ability to work independently and collaboratively within a team Full UK driving licence with no more than 6 penalty points Strong organisational skills and attention to detail Willingness to travel nationwide, work flexible hours and stay away when required Desirable Degree in Construction, Engineering or a related discipline CSCS Card Experience supporting nationwide site projects Knowledge of structural, mechanical or electrical engineering principles BENEFITS Holiday package of 33 days including Bank Holidays Pension scheme HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CVs of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14683 Full-Time, Permanent Engineering Jobs, Careers and Vacancies. Find a new job and work in Ellesmere Port, Cheshire, North West England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. AWD-IN-SPJ TPBN1_UKTJ

Controls Engineer – Bespoke Automation / Systems Integration Cheshire / Warrington Area (Hybrid + Site Travel) I’m recruiting for a Controls Engineer to join a growing automation business delivering bespoke material handling and integrated automation systems across the UK. The work is varied and project-led, covering the full lifecycle from PLC / HMI development through to commissioning, customer handover and ongoing support. This would suit somebody who enjoys seeing projects through properly rather than being stuck purely behind a desk writing code all day. Key areas of the role include: * PLC and HMI software development (Siemens and/or Rockwell) * Commissioning and fault finding on customer sites * FAT, SAT and system handover * Supporting customers with live systems and upgrades * Working closely with project engineers, software engineers and customers throughout delivery The travel is mostly UK based and planned in advance, typically involving a handful of larger project phases each year rather than constant reactive travel. The business itself has a fairly open and collaborative culture. Small engineering team, decent autonomy and realistic expectations around workload and travel. They’re looking for somebody with: * Experience within industrial automation, systems integration or special purpose machinery * Strong PLC background with Siemens and/or Rockwell * Confidence dealing directly with customers and taking ownership of projects * A mix of design, commissioning and troubleshooting experience Package: * up to 65k basic salary * Car allowance * Company bonus * Call-out payment * Hybrid working Cressida Consulting Ltd is acting as a recruitment agency for this vacancy. Applicants must have the right to work in the UK. Visa sponsorship is not available

Job Description The configuration Quality Assurance Group Leader plays an instrumental role in ensuring the SA & WB Wing MCA is delivered from Broughton conforming to all Airworthiness and POA standards. You are responsible for the MCA information for the whole industrial lifecycle. You will provide the necessary leadership and development opportunities for your Configuration team and ensure robust stakeholder management of your operational CDT & Functional interfaces. You will also provide additional support to the Quality Operations Manager and support other quality business initiatives that are running in the area. This could be quality processes or Quality project improvements. Responsibilities Manage the inspection reports for each MCA delivery for all three programs from Broughton Ensure all serialised parts are recorded correctly in the CAIR system (SAP PAC) Ensure all the outstanding work orders are recorded in the Chapter 5 to allow the Final Assembly Line to complete the MCA to the customer requirements Ensure all Wing re-allocations are managed efficiently and effectively in line with relevant processes and procedures They will validate the final Assembly Inspection Report (only if Aircraft trained) Ensures that the surveillance activities are adhered to throughout the business Assures that certification processes are consistently defined and applied within the business by the business Ensures the coordination and support of engineer by ensuring that reported quality / technical issues from business teams and customers have appropriate corrective and preventive action taken by the accountable function through use of multifunctional team activities To ensure process confirmation and surveillance activities on all product and process related activities conducted by those individuals who have been granted certification privileges Coordinate investigations to assess the probable cause of any deficiency noted during an audit, informing the accountable function and ensuring corrective and preventive action is taken The facilitation of Quality tools and techniques within the business area Configuration Quality Assurance Group Leader responsible for the task management of the team including communications and coaching. The Configuration Quality Assurance Group Leader adds value through deployment adherence of Quality processes that continuously improves across Safety, Quality, Cost, Delivery and People (SQCDP) The Configuration Quality Assurance Group Leader ensures that EHS and Airworthiness requirements are met by their team. Conduct daily process confirmation on standards adherence Lead and Support Quality investigation & structures problem solving Lineside Quality Engineer coaching and development Upward escalation of issues impacting Quality performance Completion of any reasonable task requested by Product Quality Manager to achieve Required Skills Essential Logical thinking, a structured approach to problem solving SAP based experience (APD/ARP/PAC) Problem solving and the ability to troubleshoot issues with a calm methodical approach Willingness to independently learn and develop yourself and others to optimise and respond to business queries as they are raised Good communication, interpersonal and stakeholder management skills with ability to communicate at all levels of organisation and build reliable networks Ability to work independently, leading tasks when required, whilst keeping the team and the business updated on progress English language written and oral skills Lead by example living Airbus values (We are one/Teamwork, Customer Focus, integrity, Creativity, Respect, Reliability) Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy. TPBN1_UKTJ

Service & Commissioning Engineer Location: Chester Are you confident fault-finding on complex instrumentation? Do you enjoy a mix of lab-based work and site commissioning? Looking for a role where no two days are the same? What's in it for you ·£43,000 salary ·25 days annual leave plus bank holidays ·Life Insurance ·Pension: 4% Employee and 5% Employer ·Private Health Care (employee only) ·Long Service Annual Leave Accrual ·Overtime where applicable What will you be doing? ·Provide technical support to clients and service engineers via phone and email ·Calibrate, repair and service systems, mainly GC instrumentation ·Prepare test equipment and support FATs with clients present ·Assist with pre-commissioning and commissioning activities on-site and in-house ·Deliver remote support for reactive maintenance ·Strip down and overhaul gas analysers, regulators and control valves ·Carry out PLC/flow computer programming, configuration and fault finding ·Compile reports and documentation for all customer activities ·Support technically complex customer orders and internal teams ·Join a 24/7 helpline rota once trained Where you'll be doing it You'll be working for a specialist engineering business supporting customers across the gas and instrumentation sector. The role combines laboratory work with occasional site visits, offering a varied and hands-on environment. What you'll need ·Minimum 2 years' experience in a technical role within the gas industry ·Experience or knowledge of PLCs ·Strong fault-finding and diagnostic skills ·Good communication skills, both written and verbal ·Ability to prioritise work and meet deadlines ·HNC/HND in Electrical, Electronic or Mechanical Engineering (or similar experience) ·GCSEs including Maths, English and Science ·Comfortable using Microsoft Office Desirable: ·Experience with odourisation systems or chromatography ·18th Edition / Inspection & Test / Compex ·Project or order management experience We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

Job Description The configuration Quality Assurance Group Leader plays an instrumental role in ensuring the SA & WB Wing MCA is delivered from Broughton conforming to all Airworthiness and POA standards. You are responsible for the MCA information for the whole industrial lifecycle. You will provide the necessary leadership and development opportunities for your Configuration team and ensure robust stakeholder management of your operational CDT & Functional interfaces. You will also provide additional support to the Quality Operations Manager and support other quality business initiatives that are running in the area. This could be quality processes or Quality project improvements. Responsibilities Manage the inspection reports for each MCA delivery for all three programs from Broughton Ensure all serialised parts are recorded correctly in the CAIR system (SAP PAC) Ensure all the outstanding work orders are recorded in the Chapter 5 to allow the Final Assembly Line to complete the MCA to the customer requirements Ensure all Wing re-allocations are managed efficiently and effectively in line with relevant processes and procedures They will validate the final Assembly Inspection Report (only if Aircraft trained) Ensures that the surveillance activities are adhered to throughout the business Assures that certification processes are consistently defined and applied within the business by the business Ensures the coordination and support of engineer by ensuring that reported quality / technical issues from business teams and customers have appropriate corrective and preventive action taken by the accountable function through use of multifunctional team activities To ensure process confirmation and surveillance activities on all product and process related activities conducted by those individuals who have been granted certification privileges Coordinate investigations to assess the probable cause of any deficiency noted during an audit, informing the accountable function and ensuring corrective and preventive action is taken The facilitation of Quality tools and techniques within the business area Configuration Quality Assurance Group Leader responsible for the task management of the team including communications and coaching. The Configuration Quality Assurance Group Leader adds value through deployment adherence of Quality processes that continuously improves across Safety, Quality, Cost, Delivery and People (SQCDP) The Configuration Quality Assurance Group Leader ensures that EHS and Airworthiness requirements are met by their team. Conduct daily process confirmation on standards adherence Lead and Support Quality investigation & structures problem solving Lineside Quality Engineer coaching and development Upward escalation of issues impacting Quality performance Completion of any reasonable task requested by Product Quality Manager to achieveRequired Skills Essential Logical thinking, a structured approach to problem solving SAP based experience (APD/ARP/PAC) Problem solving and the ability to troubleshoot issues with a calm methodical approach Willingness to independently learn and develop yourself and others to optimise and respond to business queries as they are raised Good communication, interpersonal and stakeholder management skills with ability to communicate at all levels of organisation and build reliable networks Ability to work independently, leading tasks when required, whilst keeping the team and the business updated on progress English language written and oral skills Lead by example living Airbus values (We are one/Teamwork, Customer Focus, integrity, Creativity, Respect, Reliability)Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy

My client is looking for a Configuration Quality Lead to join them on a 12-month contract. As the Configuration Quality Lead, you will play a key role in ensuring SA & WB Wing MCA deliveries from Broughton meet all Airworthiness and POA standards across the full industrial lifecycle. Leading a high-performing Configuration team, you'll drive quality excellence, build strong stakeholder relationships, and support continuous improvement initiatives that enhance operational and quality performance across the business. Role: Configuration Quality Lead Pay: £21.84 per hour via Umbrella + 20% Shift uplift, inside IR35 Location: Broughton Contract: 12 Months Hours: Monday - Friday, 35 hours per week, One-week mornings, one-week afternoons (alternating) Responsibilities Manage the inspection reports for each MCA delivery for all three programs from Broughton Ensure all serialised parts are recorded correctly in the CAIR system (SAP PAC) Ensure all the outstanding work orders are recorded in the Chapter 5 to allow the Final Assembly Line to complete the MCA to the customer requirements Ensure all Wing re-allocations are managed efficiently and effectively in line with relevant processes and procedures They will validate the final Assembly Inspection Report (only if Aircraft trained) Ensures that the surveillance activities are adhered to throughout the business Assures that certification processes are consistently defined and applied within the business by the business Ensures the coordination and support of engineer by ensuring that reported quality / technical issues from business teams and customers have appropriate corrective and preventive action taken by the accountable function through use of multifunctional team activities To ensure process confirmation and surveillance activities on all product and process related activities conducted by those individuals who have been granted certification privileges Skills & Experince Logical thinking, a structured approach to problem solving SAP based experience (APD/ARP/PAC) Problem solving and the ability to troubleshoot issues with a calm methodical approach CAIRS experience beneficial. Willingness to independently learn and develop yourself and others to optimise and respond to business queries as they are raised Good communication, interpersonal and stakeholder management skills with ability to communicate at all levels of organisation and build reliable networks Ability to work independently, leading tasks when required, whilst keeping the team and the business updated on progress English language written and oral skills Other Working Pattern - double day shift pattern (alternating weeks) Week of mornings - 6:00am - 1:10pm Week of afternoons - 1:30pm - 8:40pm If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

More About The Role Our sites are ever-demanding, complex and in some cases operate 24 hours a day - so it's vital we have a strong Engineering team who ensure our machines work to the best of their ability. So we can continue to provide great products to our customers, whilst still ensuring speediness. As a Mechanical Engineer, you will play a vital role in ensuring the smooth operation of our Manufacturing site. You will be responsible for the maintenance, repair, and improvement of our machinery and equipment, ensuring minimal downtime and maximum efficiency. This is a hands-on role that requires strong technical skills and the ability to troubleshoot and solve problems quickly. Reporting to the Site Engineering Manager your responsibilities will include: * Conduct routine inspections and preventive maintenance on production equipment, identifying and resolving any potential issues before they cause disruptions * Respond promptly to machinery breakdowns, diagnose the problem, and perform repairs or coordinate with external specialists when necessary * Carry out machine adjustments and changeovers to support production line efficiency and minimise downtime * Monitor and calibrate equipment to ensure accuracy, quality, and safety standards are met * Collaborate with production teams to identify opportunities for process improvement and provide technical expertise to enhance productivity * Keep accurate records of maintenance activities, including maintenance schedules, repairs, and spare parts inventory * Adhere to health and safety guidelines and ensure compliance with company policies and procedures * Stay updated with industry advancements and new technologies relevant to the role About You As well as the ability to work at pace, we're also looking for someone who has: * Qualifications to NVQ level 3 (or equivalent, ONC mechanical engineering, BTEC level 3 in mechanical ) * Strong knowledge of mechanical and electrical systems used in FMCG industry * Proficient in troubleshooting and repairing industrial machinery, including conveyors, motors, pumps, and packaging equipment * Proactive approach to maintenance and a commitment to ensuring the highest levels of equipment reliability * A good understanding of HACCP principles and ideally IEE qualification up to 17th edition wiring regulations would be advantageous * Excellent communication skills * Assertiveness with the ability to make decisions on the spot * A can do attitude and a strong work ethic In return for your hard work we will offer you: * Six weeks holiday (including bank holidays) * 15% discount in our stores available from the day you join us * Additional 10% discount card for a friend or family member * Career progression and development opportunities * Subsidised staff canteen * Free parking * Market leading pension and life assurance * Healthcare/Well-being benefits including Aviva Digital GP * Morrisons MyPerks with discounts at high street shops, cinemas and gyms, and lots more * Long Service Awards * Optional Payroll charity donations * Enhanced Family/maternity/parental leave About The Company You’ll find a great big welcome here at Myton Food Group - the part of our business that looks after manufacturing, whilst maintaining strong roots within Morrisons Supermarkets. At Myton Food Group, we have a legacy to be proud of. We’re British farming’s biggest single direct customer. We buy from highly valued suppliers. And we’re passionate about the quality of our food. Today, we have 19 manufacturing sites across the UK, where we pack and process fresh meats and fish, savoury and sweet pies, fruit and veg, flower bouquets, bread and lots more. We really do stand out in the world of food manufacturing. But what we’re especially proud of is the way we all get stuck in and work as a team, in partnership across our supply chain. Read more about what we do at our Myton Food Group website

Field Service / Commissioning Engineer Commutable from Liverpool, Warrington, South Manchester Special Purpose Machinery & Advanced Manufacturing I’m working with a highly regarded engineering-led automation business that designs, builds and supports bespoke robotic and automated systems for a global customer base. Operating across advanced manufacturing and highly regulated sectors, the business delivers technically complex machinery and automation solutions, supported by a strong aftersales and field service function. This is a key customer-facing engineering role, combining field service, commissioning, fault finding and preventative maintenance across installed automation systems. You will act as the first point of contact for technical issues, supporting customers both remotely and on site. This includes troubleshooting mechanical and electrical faults, carrying out planned maintenance, calibrating equipment, commissioning upgrades and supporting reactive breakdown visits. The role would suit a hands-on engineer with strong fault-finding capability across electrical, mechanical and automated systems. Experience within bespoke machinery or other highly automated manufacturing environments would be particularly relevant. You will be expected to travel to customer sites in the UK and internationally for both proactive service visits and reactive support so this would suit someone who enjoys the field-based and customer-facing side of engineering. The business also places a real emphasis on career development and technical progression. They are genuinely supportive of further training and specialist courses, whether that is robotics programming or technical certifications. Key areas of responsibility include: • reactive field service and customer support, • commissioning and system upgrades, • preventative maintenance and calibration, • remote fault diagnosis and technical support, • mechanical and electrical root cause analysis, • service reporting and helpdesk updates, • customer communication and issue resolution, • supporting service level agreements You should ideally have: • HNC / apprenticeship / equivalent hands-on engineering background, • strong electrical and mechanical fault-finding skills, • experience in field service, commissioning or customer support, • familiarity with automation systems, PLCs, robotics or instrumentation, • a willingness to travel globally as required This is an excellent opportunity for someone who enjoys being close to the customer, solving real technical issues and developing their technical skill set within a business that actively invests in its engineers. Salary: £50,000–£60,000 depending on experience + £500 per month car allowance Holidays: 25 days + bank holidays Pension: 5% employer contribution Cressida Consulting Ltd is acting as a recruitment agency in relation to this vacancy. All applications will be handled in accordance with the UK GDPR and Data Protection Act 2018. By applying for this role, you consent to your data being processed and stored for recruitment purposes. You may request to have your data removed at any time

Service Engineer- Chromatography/Lab Instrumentation Location: -Chester- Site & Field based role Salary & Benefits: -Up to £43,000 per annum, 25 days annual leave plus bank holidays, Life Insurance, Pension: 4% Employee and 5% Employer, Private Health Care (employee only), Long Service Annual Leave Accrual, Overtime where applicable & Company pool car. Our client a specialist engineering business, are looking to hire a Field Service Engineer to support customers across the gas and instrumentation sector. The role combines laboratory work with occasional site visits, offering a varied and hands-on environment. What will you be doing? • Provide technical support to clients and service engineers via phone and email • Calibrate, repair and service systems, mainly GC instrumentation • Prepare test equipment and support FATs with clients present • Assist with pre-commissioning and commissioning activities on-site and in-house • Deliver remote support for reactive maintenance • Strip down and overhaul gas analysers, regulators and control valves • Carry out PLC/flow computer programming, configuration and fault finding • Compile reports and documentation for all customer activities • Support technically complex customer orders and internal teams • Join a 24/7 helpline rota once trained • Attend training courses relevant to the position. The Person • Previous experience within a similar service role with instrumentation. • Experience or knowledge of PLCs • Strong fault-finding and diagnostic skills • Good communication skills, both written and verbal • Ability to prioritise work and meet deadlines • Educated to HNC/HND or degree in Electrical, Electronic, Mechanical Engineering or Analytical science. • Strong IT skills. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

This is a fantastic opportunity to join a Stockport-based engineering company specialising in the design and build of advanced inspection and automation machines. Serving a global customer base, it delivers innovative, high-quality solutions focused on performance, reliability and continuous improvement. Installation and Maintenance Engineer Up to £50k + Bonus + Pension + Flexible Working. 30% Overseas. Cheshire. Ref: 24977 Installation & Maintenance Engineer - The Role: Provide advanced technical support, diagnosing and troubleshooting complex mechanical, electrical and software issues Lead installation, maintenance and service projects for inspection and automation machines Oversee system performance, conduct audits and ensure reliability and optimal operation Mentor and train junior engineers on systems, troubleshooting and best practices Maintain detailed documentation of service work, system configurations and maintenance activities Build strong customer relationships, explain technical issues clearly and deliver excellent support Ensure all work complies with safety regulations, company policies and industry standards Collaborate with design and development teams to improve systems and resolve technical challenges Travel nationally and internationally (up to 8 trips per year, typically up to 2 weeks) for installations and servicing Support workshop-based system builds and provide remote customer assistance when not travelling Installation & Maintenance Engineer - The Person: Degree in an engineering discipline (Mechanical, Electrical, Computer Science) or equivalent Around 5+ years’ experience in a similar engineering/service role Strong troubleshooting skills across mechanical, electrical or electronic systems Experience with Operational Technology (OT) or Distributed Control Systems (DCS) preferred Excellent problem-solving, communication and customer-facing skills Ability to mentor others and work collaboratively across teams Proactive, flexible and driven to improve systems and service performance Willing and able to travel internationally and work flexible hours when required Full UK driving licence and valid passport with no travel restrictions Must be eligible to work in the UK (no visa sponsorship available) This role would be commutable from Manchester, Wilmslow, Macclesfield, Warrington and other surrounding areas. For further information please contact Sharon Hill. AE1

The school are specifically looking for someone who is committed to developing a team approach, working with parents, teachers, support staff and the wider community.

Because we match you with local customers, youll also spend less time travelling. If you ever need help, our super-responsive support team is here for you 7 days a week.

Our client is a housing and care provider in Bedford.Bedford Charter House, their residential care home.They offer flexibility with working patterns however the role would be required to work one weekend in three.This is a role that will include all aspects cleaning of the care home.This is a vital

Part Time- 4:30pm-7:30pm Monday-Friday.We are currently looking for a.General cleaning duties including sweeping, mopping, vacuuming, and dusting.Cleaning toilets, kitchens, and communal areas.Emptying bins and disposing of waste correctly.Replenishing cleaning supplies and consumables.Following hea

They are inviting compassionate, committed individuals to join their team of Support Workers in their Supported Living settings. This is a rewarding and meaningful role, supporting adults with autism, learning disabilities, mental health needs, complex needs, and behaviours that challenge, helping t

Northwood and perform the high level cleaning across our busy manufacturing areas, as well as other areas on the premises to ensure a safe and clean workspace for all our colleagues.The shift pattern is 4 on 4 off (Days, 6am-6pm).Industrial cleaning of site facilities and production areas.All enviro

You will be part of the team delivering our Domestic Abuse Services which include safe accommodation services (refuge) and community-based services (early help and outreach), ensuring that our customers receive an excellent level of support that uses a strengths-based and trauma informed approach an

Join a team that is more than just a group of colleagues - we work MONDAY TO FRIDAY as a supportive and driven family, working together to create a safe and nurturing environment.

We have developed our Support and Protect Service to support children and families who need longer term support and achieving permanence this might be through Child Protection Planning. We are ambitious for our children and for our practitioners - and our core value is 'would this be good enough

We are seeking warm, respectful, and energetic individuals to join our Scunthorpe services as Relief Support Workers. This role involves providing person-centred support to individuals with learning disabilities, empowering them to lead fulfilling, inclusive lives while upholding their independence

Once any support package is in place, our bespoke support worker (s) will be responsible for:. Every young person in our care is supported by a team of experienced, empathetic staff within warm, welcoming homes. Role of the Bespoke Support Workers.

This is not a standard warehouse role, read the description.Do you want a career? Do you want progression? If so, we are looking for someone to join an established company that can offer a job with variety and development.This opportunity is working in a brand new state of the art facility based in

Senior Residential Support Worker . They have over 35 years of experience delivering high-quality services, and will be building on three Ofsted supported accommodation registrations to help ensure that children who need care in Swindon have a home locally. Be a positive role model, providing g

Lead, supervise, and support a team of support workers, providing guidance, mentoring, and regular supervision. Offering Supported Living accommodation for young people. Participate in recruitment, training, and development of support staff.