Trabajos design engineering en BoltonCrear alertas

At Network Plus, we are committed to developing the next generation of talent. As an Apprentice Design Technician, you will gain practical experience supporting our design team while developing your skills in technical drawing, surveying and utilities design. Working alongside experienced colleagues, you will learn to use AutoCAD, gather information on site and produce drawings that meet our clients’ standards. You will receive training and guidance as you build your confidence and take on more responsibility. No previous design, AutoCAD or water industry experience is required. A full driving licence and access to your own car are essential, as the role involves regular travel to sites. What You’ll Learn How to use AutoCAD to create accurate technical drawings. How to gather and record site information using GNSS/GPS surveying equipment. The engineering principles and design processes used in clean water and wastewater projects. How to follow client asset standards and drawing specifications. How to communicate with colleagues and clients and manage work to agreed deadlines. About the Apprenticeship You will combine practical workplace experience with structured apprenticeship learning. Our experienced team will support you as you develop the knowledge, skills and confidence needed to build a career in design within the utilities sector. • Attend site visits and surveys alongside experienced colleagues to gather information for detailed designs and as-laid drawings., • Learn to produce as-laid drawings using AutoCAD, following client asset standards and procedures., • Work with internal teams to obtain information and help complete drawings within agreed timescales., • Support the arrangement of client walk-off meetings and attend with colleagues., • Assist the design team in preparing technical drawings, plans and general arrangements., • Learn to create private land notice plans in accordance with client processes and specifications., • Provide regular updates on your work to the Design/Commercial Manager., • Support the design team with administrative tasks, record keeping and document management., • Complete apprenticeship learning and assessments, applying your developing skills in the workplace., • A full driving licence and access to your own car., • An interest in design, engineering or the utilities industry., • Enthusiasm, curiosity and a willingness to learn., • Basic IT skills, including familiarity with Microsoft Word, Excel and Outlook., • Good attention to detail and a methodical approach to tasks., • A willingness to develop your numerical and problem-solving skills., • Good communication skills and the ability to work as part of a team., • The ability to organise your workload with support and guidance., • A willingness to work both in the office and on site., • You do not need previous design experience or an engineering qualification to apply. Training will be provided in AutoCAD, surveying equipment and relevant industry processes. We offer a competitive apprenticeship salary along with a full benefits package, structured training and support to develop your career. Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status or any other applicable characteristics protected by law. We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners. We understand that privacy and the security of your personal information are extremely important. By applying for this role, you agree to the terms of our _. Network Plus is an award-winning business delivering essential utility and infrastructure services for the UK’s major providers of gas, power, telecoms, transport, water, and wastewater. We value the variety of experience, perspective, and other points of difference our workforce, clients, and supply chain offer. We are actively working with colleagues across the Network Plus Group to develop an inclusive environment – we want all our employees to feel valued and included to enable everyone to thrive at work and understand the value of their contribution matters no matter their background, identity, or circumstances.

As a Gas Designer you will play a key role in the design process, from site surveys through to the production of detailed drawings, while developing your technical expertise and working closely with experienced engineers and project teams. • Monitor leading industry practices, recommend new design approaches, and identify upcoming trends., • Develop high-quality concepts, working with team on iterations and design, actively seek feedback from Creative and Business stakeholders, • Working on all design phases of projects, including project set-up, programming, design, and CDM documentation, • Requesting & reviewing STAT plans, • Providing technical design support to other members of the design team., • Collaborate with both internal design team, client design team and external consultants to execute creative projects, • Responding to and resolving issues with external parties such as the client, third party organisations & sub-contractors, • Producing a weekly design report & presenting information to the Design Manager during the weekly design output meeting., • Complete regular site visits and surveys to gather information for detailed designs & as-laid drawings., • Represent the company and arrange pre-design and walk off meetings with the client., • Ensure compliance with CDM 2015 throughout the design process., • Produce and make ongoing updates to the H&S file throughout various stages of the project ensuring that it is up to date and available at the end of the project., • Create high-quality detailed technical drawings, plans and general arrangements., • Work alongside the Framework Manager / Project Manager/ Operations Manager/ Design Manager to ensure all schemes are designed within budget and within the time constraints set by the client., • Assist with design queries during construction from the onsite team., • Take designs through the clients G17 governance process., • Travel across to sites across the UK may be required for tender events and in progress design reviews., • Engineering qualifications desirable however good experience would be considered., • Experience of working on intermediate pressure and high pressure gas mains, • Experience of working in the gas industry on designing high-profile projects, • Understanding and knowledge of relevant Engineering specifications that apply to the gas industry (IGEM standards), • Knowledge and Awareness of CDM 2015, • Proficient user of AutoCAD, • Competent in Excel, Word, PowerPoint, Outlook, • Strong analytical and problem-solving skills, • Ability to work as part of a team and to organise your workload across multiple projects, • Willingness to mentor and support less experienced colleagues We offer a competitive salary based on experience along with a full benefits package. Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners. We understand that privacy and the security of your personal information is extremely important. By applying for this role, you agree to the terms of our privacy policy. Network Plus is an award-winning business delivering essential utility and infrastructure services for the UK’s major providers of gas, power, telecoms, transport, water, and wastewater. We value the variety of experience, perspective, and other points of difference our workforce, clients, and supply chain offer. We are actively working with colleagues across the Network Plus Group to develop an inclusive environment – we want all our employees to feel valued and included to enable everyone to thrive at work and understand the value of their contribution matters no matter their background, identity, or circumstances.

Description\n \n\n The Senior Estimator is a lead role within our Project Management Office (PMO), responsible for pricing and winning large, complex capital schemes across water, gas, electricity and civils. It requires an organised, self-motivated and meticulous approach, combined with the commercial judgement and technical leadership to own high-value tenders from enquiry through to award. You will meet monthly work-winning targets with a view to ensuring the ongoing success and profitability of the Business.\n \n \n You will collaborate with our clients at a senior level to develop relationships that increase our likelihood of securing framework and contract opportunities. You will lead the entire tender process on your bids – from developing accurate, detailed proposals and target costs, through to negotiating prices and contract terms with the client and presenting bids for adjudication and sign-off. \n \n \n\n\n You will also provide technical leadership and mentoring to the wider estimating team, and develop strong working relationships with our operational delivery teams to ensure a fluid handover from tender into the construction phase\n\n \nKey Responsibilities\n \n\n Estimating & Commercial\n\n\n • Lead and own the estimating lifecycle for large, complex capital schemes across water, gas, electricity and civils – from enquiry and first-principles build-up through to tender adjudication, award and handover\n, • Lead tender adjudication and settlement meetings, presenting cost, margin, risk and commercial strategy to Directors and senior management for sign-off\n, • Survey potential work sites across water, gas, electricity and civils schemes: establish ground and site conditions, confirm scope of work and specific design and specification requirements\n, • Produce detailed survey reports for pricing and future co-ordination of works\n, • Lead the analysis of plans, complete take-offs and produce detailed bills of quantities and first-principles cost estimates, assessing all project documentation to provide accurate, competitive and compliant tender submissions\n, • Lead supply chain engagement: issue enquiries, evaluate subcontractor and supplier proposals for technical compliance and commercial value, and shape procurement strategy to secure best prices\n, • Develop a comprehensive understanding of relevant construction methods and technologies across the water, gas, electricity and civils disciplines\n, • Lead value engineering to identify the best solution for our client’s requirements, offering a competitive price and best value whilst protecting margin and maximising our return on the project\n, • Where required liaise with the Proposals co-ordinator and other team members to produce detailed tender submissions\n, • Generate detailed quotes for our clients inclusive of all labour, plant & material costs supplemented by adjustments for overheads and profit \n, • Own tender risk: lead formal risk reviews and tender health checks, assess financial, technical, contractual and operational risks, and factor these into our pricing and contingency\n, • Prepare detailed Schedule of works/ Bill of Quantities for our Contracts Managers to work from\n, • Formulate detailed programmes in line with the project contract requirements \n, • Understand site specific risks and complete analysis of these for presentation in the tender risk register\n, • Prepare schematics, layouts and presentations to support proposals and quotations\n, • Promote and develop relationships with clients and suppliers\n, • Interpret contract forms (e.g. NEC and JCT) and framework requirements, factoring commercial and contractual risk into pricing\n, • Provide technical leadership, mentoring and quality assurance to the estimating team, reviewing colleagues’ estimates for accuracy and competitiveness and helping to allocate estimating resource across bid teams\n, • Capture actual cost data and benchmarks on completed schemes and feed these back to improve estimating accuracy and processes\n, • Stay up to date with the latest industry regulations and legislative requirements across the utilities sectors\n\n\n Work Winning & Client Relationships\n\n\n, • Lead monthly review and analysis of estimating figures and win rates, providing bid/no-bid input and driving improvements in conversion and margin\n, • Attend meetings throughout England and Wales with both new and existing customers to promote Network Plus across the water, gas, electricity and civils sectors\n, • Utilise the CRM system to record, share and monitor leads & enquiries \n, • Maintain client relationships by liaising with Contracts Managers to ensure successful completion of tendered works\n, • Provide proactive and timely response to client enquiries and queries\n\n \nExperience and Qualifications\n \n\n • Proven track record of leading and winning large, complex tenders in a competitive environment\n, • Excellent communication and negotiation skills \n, • Substantial estimating experience within the utilities and/or civil engineering sector, including large capital schemes across one or more of water, gas, electricity and civils\n, • Experience leading tender adjudication and settlement, and presenting bids to senior stakeholders\n, • First-principles estimating expertise – take-offs, bills of quantities and rate build-ups\n, • Understand the need for flexibility within a growing business\n, • Ability to work under pressure and to meet tight deadlines\n, • Strong commercial and contractual awareness, including NEC and JCT forms of contract\n, • Attention to detail\n, • Methodical approach to work with good organisation and time-management skills\n, • Leadership, mentoring, relationship-building and influencing skills, with the ability to guide a team of estimators\n, • Proficient in estimating software (e.g. CANDY, Conquest or Causeway) with good IT skills for bid presentation and reporting\n, • Relevant degree (Civil Engineering, Construction or Quantity Surveying) and/or professional membership (ICE, RICS or CIOB) desirable; CSCS card\n\n \nSalary and Benefits\n \n\n We offer a competitive salary based on experience along with a full benefits package.\n \n \n\n\n Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.\n \n \n\n\n We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners.\n \n \n\n\n We understand that privacy and the security of your personal information is extremely important. By applying for this role, you agree to the terms of our privacy policy.\n \n \n\n \nAbout Network Plus \n\n Network Plus is an award-winning business delivering essential utility and infrastructure services for the UK’s major providers of gas, power, telecoms, transport, water, and wastewater.\n \n \n\n\n We value the variety of experience, perspective, and other points of difference our workforce, clients, and supply chain offer.\n \n \n\n\n We are actively working with colleagues across the Network Plus Group to develop an inclusive environment – we want all our employees to feel valued and included to enable everyone to thrive at work and understand the value of their contribution matters no matter their background, identity, or circumstances.\n

Exciting Opportunity for a Section Engineer in the Water/Wastewater Industry Role: Section Engineer Location: Multiple Positions across Lancashire Rate: Up to £550per day DOE - Inside IR35/Umbrella PAYE Duration: 12 Months+ Sector: Wastewater Non-Infrastructure About the business Join a dynamic Tier 1 contractor at the forefront of the water industry, currently delivering major projects across the United Utilities framework. Due to continued growth and a strong pipeline of AMP8 work, an exciting opportunity has arisen for an experienced Section Engineer to support the successful delivery of wastewater and water treatment projects across the Lancashire region. This contractor is recognised for embracing innovation and digital engineering, investing heavily in modern construction technologies, BIM and digital delivery systems to improve project performance. If you're looking to work for a business that is pushing the boundaries of technology within the sector, this is an opportunity not to be missed. Key Responsibilities ·Support the Senior Engineer in the successful delivery of designated sections of wastewater and water treatment projects. ·Lead and coordinate Site Engineers, providing technical guidance and ensuring engineering activities are delivered safely, efficiently and to programme. ·Oversee engineering activities including large earthworks, deep drainage, temporary works and reinforced concrete construction. ·Review drawings, specifications and technical information, resolving engineering queries and coordinating with the design team where required. ·Ensure quality assurance procedures, inspections and site documentation are completed in accordance with project requirements. ·Promote the use of BIM, digital engineering platforms and innovative construction technologies across the project. ·Work closely with the Project Manager, commercial team and subcontractors to ensure successful project delivery. Requirements ·Previous experience as a Section Engineer, Senior Site Engineer or similar within a Tier 1 contractor environment. ·Degree qualified in Civil Engineering or a related discipline (preferred). ·Strong experience delivering large civil engineering projects involving earthworks, deep drainage and temporary works. ·Experience managing engineering teams and coordinating multiple work fronts. ·Technically competent with BIM, digital engineering systems and modern construction technologies. ·Water or wastewater experience is desirable. ·Full UK Driving Licence. Why you should apply ·Competitive rate of up to £525 per day ·Long-term engagement with a 12 month+ duration. ·Opportunity to work for an industry-leading Tier 1 contractor delivering flagship AMP8 projects. ·Exposure to innovative digital engineering systems and modern methods of construction. ·Immediate start available. How to Apply Ready to take the next step in your career? Send your updated CV to (url removed) and follow up with a call to (phone number removed). We're eager to move swiftly in filling this position, and your prompt application is highly encouraged. At Carrington West, we value diversity and are committed to creating an inclusive workplace. Join us in pushing the boundaries of innovation in the water/wastewater sector

Software Engineer C++ / C# HWIL required for long term contract assignment based in Bolton Skillset/experience required: Extensive experience in C++ / C# development in a Windows environment. Proficiency in C# for tooling, test interfaces, or Windows components as needed. Demonstrable skills in multi-threaded and concurrent programming. Strong understanding of software design principles, memory management, and performance optimisation. Experience with version control systems (e.g., Git) and CI/CD Experience of working with technical documentation to inform the software engineering process around system software requirementsDesirable Skills: Familiarity with unit testing frameworks, automated test rigs, or hardware-in-the-loop (HWIL) setups. Experience of software engineering tools including GitLab, SonarQube, JIRA, Confluence Experience of IBM DOORS software for managing requirements and test evidenceOverview of Department: By embracing the latest software technologies and methods the Manufacturing Intelligence and Support department delivers exceptional software solutions that support our products in the field and factory. As part of a team of 5-7, you will be working with C++ and C# to respond to new customer requirements and improve the functionality of the products. An exciting element of this role is understanding the functionality of the many sub systems of a delivery, rather than focusing on one element. What we are looking for: We are currently looking to recruit an experienced self-starting Software Engineer for a position in Bolton, Greater Manchester. The role is 100% on site. The successful candidate will join our development team responsible for building and integrating data capture, analysis and training systems. The role will focus on developing and maintaining software in Windows environment, working closely with several subsystem design teams and the manufacturing teams producing the product. Proficient in C++ and C#, you will play a critical part in the design, development, integration, and verification of the software solutions that are key to the success of our products. Please Note: This project requires all employees to achieve the appropriate level of security clearance. Responsibilities: Design and develop the system interface computer software that captures the performance data. Support setting to work of new software to perform target testing on Windows hardware Architect and implement robust, scalable, and maintainable multi-threaded applications. Lead and contribute to system integration, verification, and testing at both component and system levels. Conduct performance analysis, debugging, and optimisation of real-time systems. Document architecture, interface definitions, and test procedures to support handover and formal test activities. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/ or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website

Role: Production Programmer Location: Bolton, Greater Manchester Salary: c£35k (Depending on Experience) Hours: 4 days per week Mon to Thurs, 37 hours, role is shop floor based with an office on the shop floor. Typical Hours 6.30 am – 4.15 pm or 07.00 am – 4.45 pm Job Description: The Production Programmer will be responsible for the CAD/CAM programming of pressed parts & lasered parts, (i.e. conversion of STP files to DXF files) for timeous issue to manufacture, and the remote programming of the press brake and laser cutting resources. The role will also be responsible for uploading of data into the MRP software in a timely manner to ensure a smooth process is upheld within the department. The Production Programmer works within the Production Engineering team and is expected to contribute to the achievement of departmental standards and objectives. Responsibilities & Duties: • CAD/CAM programming – ability to read and interact with 2D and 3D CAD drawings and convert these from STP to DXF files for manufacturing purposes. Deal with relevant enquiries from internal and external parts suppliers. Issue files for production use in line with the project programme. • Machine programming – carry out remote programming for press brake and laser machines to enable parts production, in line with project programme. • MRP system – Upload relevant and accurate data into the MRP system in accordance with project schedule. • Process Optimisation and Continuous Improvement – Have an active involvement in the improvement of manufacturing sustainability and process safety of current & new products. • Design for Manufacture - Contribute to the design for manufacture process, ensuring that parts are viable and that doors are designed in-line with manufacturing performance requirements . • Manufacturing Resources – As part of the programming process, identify any tools, equipment, plant, jigs, fixtures required to improve safety, quality and productivity and initiate procurement of these. • Capital Expenditure – Assist with justification/approval documentation for related capital expenditure.. • KPI’s – Meet project key dates for programming deliverables. • Other duties – perform ad hoc duties as may be required, commensurate with the grade of the post. Qualifications, Knowledge, Experience & Skills: Essential • Good working knowledge of 2D and 3D CAD software (preferably Inventor) • Experience in press brake operating • Computer literacy • Understanding of relevant manufacturing processes • Good communication skills, including ability to work effectively within a team • Problem solving skills • Training and experience in the metal fabrication and parts manufacturing industry Desirable • Engineering/manufacturing qualifications (completed apprenticeship, HNC,HND, etc). • CADMAN-B software experience • Progress Plus MRP software experience • Experience working within an ISO 9000 quality management system

Echelon Engineers are recruiting on behalf of our client for a Senior Design Engineer to join their established team in Bolton. This is an incredible opportunity as the company is actively seeking next-generation talent to drive the business forward, offering exceptional career advancement prospects. This full-time, on-site role involves developing engineering designs and technical drawings for fabrication, alongside various mechanical and related engineering tasks. You'll utilise CAD software for product design while collaborating closely with the production team to ensure all designs meet client specifications. The position requires regular interaction with cross-functional teams to support project goals and deliverables, making it perfect for someone looking to gain broad exposure across the business. Why This Role Stands Out: The company is committed to fast-tracking the careers of talented engineers who demonstrate potential and drive. As they look to bring in fresh perspectives to take the organization forward, successful candidates will find themselves with accelerated development opportunities and genuine progression prospects. What We're Looking For: Strong skills in Design Engineering Proficiency in Mechanical Engineering, particularly with rotating equipment Experience with CAD software (2D and 3D) Excellent problem-solving and analytical abilities Collaborative approach and strong teamwork skills Bachelor's degree in Engineering or related field Experience in bulk solids handling and processing equipment (advantageous) Strong attention to detail with commitment to quality This is more than just an engineering role - it's a gateway to shaping your career with a forward-thinking company that values innovation and invests in its people. Please apply asap to avoid missing out

Based in Bolton, this permanent position offers an excellent opportunity for a detail‑oriented engineer to support the delivery of product testing and certification activities within a well‑established manufacturer. You’ll help ensure their high‑performance engineered products meet all relevant standards and customer expectations. Location and Working Pattern Bolton based 37 hours per week, Monday to Friday Typical hours: 8:00am–5:00pm Monday to Thursday, 8:00am–12:00pm Friday Home working most FridaysClient Overview Our client is a respected engineering manufacturer specialising in the design and production of secure, safety‑critical products. They have a longstanding reputation for quality, advanced fabrication methods and rigorous compliance with technical standards across all projects. Responsibilities Support the Product Test & Assurance Manager in planning and delivering product tests and assessment activities. Attend internal and external test facilities, representing the business professionally and supporting the agreed test programme. Organise test logistics, including bookings, specimen readiness, transport, site access, equipment and documentation. Confirm all drawings, specifications, product configurations and supporting evidence are accurate before testing. Liaise with internal teams, suppliers, test houses and assessment bodies to coordinate test activities and resolve issues. Maintain test plans, trackers and schedules, escalating risks and delays where necessary. Record observations, configuration details, photographs, results and follow‑up actions in a clear, traceable manner. Manage test report administration, reviewing and finalising controlled documents. Provide accurate reporting to stakeholders across multiple business areas when required.Must‑have Requirements HND/HNC in Engineering or equivalent practical experience. Previous experience in product testing, certification, quality or compliance within an engineering environment. Strong ability to interpret engineering drawings, specifications and test plans. Excellent organisation, documentation and record‑keeping skills. Clear written and verbal communication, with confidence to deal with internal teams and external test bodies. Full UK driving licence and flexibility to travel or work extended hours when required.Nice‑to‑have Skills Awareness of fire, security door or hardware products, and related test standards. Understanding of manufacturing processes such as steel fabrication, welding and assembly. Competence in maintaining trackers and reporting task progress. The NRL Group connect global companies with the right people to bring engineering projects to life. Supporting contracting companies with energy transition plans and working with our clients to create a cleaner, greener future. We welcome applications from every walk of life and are committed to diversity within the industries we support, as a certified Inclusive Recruiter and Armed Forces friendly employer. You can ensure you stay safe when job searching online by visiting the JobsAware website

Location: Bolton (fully onsite) Duration: 12 months Rate: £65ph UMB (Inside IR35) Role details: We are looking for a C# / C++ Software Engineer to join our client in Bolton, Greater Manchester. Working within a team of software engineers, the role will focus on developing, integrating and maintaining Windows-based data capture, analysis and training systems that support complex products and their associated subsystems. Key Responsibilities: Design and develop system interface software to capture and analyse performance data Support the setting to work of software on Windows hardware for target testing Architect and implement robust, scalable and maintainable multi-threaded applications Contribute to the design, development, integration and verification of software solutions Lead and support system integration, verification and testing at component and system levels Carry out performance analysis, debugging and optimisation of real-time systems Work closely with subsystem design teams and manufacturing teams Document software architecture, interface definitions and test procedures to support formal testing and handover Job Requirements: Extensive experience in C++ and C# development within a Windows environment Strong proficiency in C#, including its use for tooling, test interfaces and Windows components Experience developing multi-threaded and concurrent software applications Strong understanding of software design principles, memory management and performance optimisation Experience with version control systems such as Git and CI/CD pipelines Understanding of software requirements and technical documentation processes Ability to contribute to software integration, verification and testing activities A relevant degree or equivalent professional software engineering experience would be advantageous Desirable Skills: Familiarity with unit testing frameworks, automated test rigs or hardware-in-the-loop testing Experience using GitLab, SonarQube, JIRA and Confluence Experience with IBM DOORS for requirements management and test evidence Previous experience in Defence, Aerospace or another highly regulated engineering environment If you are an experienced C++ / C# Software Engineer with strong Windows development and concurrent programming skills, our client would welcome your application. Apply now to contribute to innovative software solutions within the Defence and Security sector

Manufacturing Engineer 12 Month Contract Based in Bolton Offering £35ph Inside IR35 Are you an experienced Manufacturing Engineer? Are you experienced with SAP? Are you looking to work with an industry-leading company? If your answers are yes to these, then this could be the role for! As the Manufacturing Engineer, you will be working alongside a market-leading defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Compilation and update of Manufacturing Instructions. Design, Commissioning, and proving of associated tooling. Support the industrial validation process through the use of FMEA's, FAI's etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support to the Non-Conformance Process using SAP. Qualifications Required: Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) AND Electrical or Mechanical Engineering / Manufacturing Level 4 academic qualification (HNC, diploma, etc.) AND Electrical or Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved OR Degree in a relevant Engineering subject. Your skillset may include: SAP experience The ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions Experience in Electronic subassembly manufacture through to System level builds Experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems Manual handling training. ESD training. If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Manufacturing Engineer 12 Month Contract Based in Bolton Offering £35ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Principal People are working with a well-established and growing Health & Safety consultancy to recruit a Health & Safety / CDM Advisor to support a diverse portfolio of clients and projects across the North West. This is a varied position combining practical Health & Safety consultancy with Principal Designer responsibilities under CDM 2015. You’ll work across healthcare, housebuilding and industrial environments, giving you exposure to different projects, clients and stages of the construction process. The role is predominantly home based, with travel to client sites typically 2–3 days per week across the North West. Around 50% of the current workload sits within NHS healthcare estates, with the remainder split across major housebuilding clients and wider industrial projects. You’ll join an experienced consultancy where you’ll be trusted to manage your own workload and client relationships, while having the support of an established wider team. What’s in it for you? Salary of £55,000 – £65,000 Car allowance of £5,000 per year Predominantly home-based position Typically 2–3 days per week visiting client sites 31 days annual leave including bank holidays Varied portfolio across healthcare, housebuilding and industrial projects Support with further professional development and qualifications What you’ll be doing Acting as Health & Safety Advisor across a portfolio of construction and engineering projects Supporting clients with their duties under CDM 2015 and fulfilling Principal Designer responsibilities where required Carrying out site inspections, audits and compliance visits Providing practical H&S and CDM guidance to clients, contractors, project managers and design teams Reviewing pre-construction information, construction phase documentation, risk assessments and design information Attending design, project and client meetings and contributing to design risk reviews Building strong relationships with clients and managing your own diary across multiple projects Supporting continued improvement in H&S and CDM standards across client organisations What they’re looking for NEBOSH General, Construction Certificate or equivalent Good practical experience within construction, engineering or a related environment Strong understanding of CDM 2015 Experience working with design teams and an understanding of Principal Designer responsibilities Full UK driving licence and comfortable travelling across the North West This could suit an established CDM / H&S professional looking for a varied consultancy position, or someone with strong construction and design experience who wants to further develop their Principal Designer capability. If you’re looking for a role offering autonomy, varied projects and the opportunity to work closely with major clients across the North West, apply today or get in touch for a confidential conversation

We are looking for a Production Programmer with good CAD Software skills/CNC programming skills to join our client based in Bolton. They design and manufacture steel products and are looking to hire someone on a permanent staff basis with full time hours condensed into 4 days per week - Typical Hours 6.30 am – 4.15 pm or 07.00 am – 4.45 pm. A salary up to 35K per annum is available plus a range of staff benefits including life assurance, and healthcare package. Job Description: The Production Programmer will be responsible for the CAD/CAM programming of pressed parts & lasered parts, (i.e. conversion of STP files to DXF files) for timeous issue to manufacture, and the remote programming of the press brake and laser cutting resources. The role will also be responsible for uploading of data into the MRP software in a timely manner to ensure a smooth process is upheld within the department. The Production Programmer works within the Production Engineering team and is expected to contribute to the achievement of departmental standards and objectives. Production Programmer - Responsibilities & Duties: • CAD/CAM programming – ability to read and interact with 2D and 3D CAD drawings and convert these from STP to DXF files for manufacturing purposes. Deal with relevant enquiries from internal and external parts suppliers. Issue files for production use in line with the project programme. • Machine programming – carry out remote programming for press brake and laser machines to enable parts production, in line with project programme. • MRP system – Upload relevant and accurate data into the MRP system in accordance with project schedule. • Process Optimisation and Continuous Improvement – Have an active involvement in the improvement of manufacturing sustainability and process safety of current & new products. • Design for Manufacture - Contribute to the design for manufacture process, ensuring that parts are viable and that doors are designed in-line with manufacturing performance requirements. • Manufacturing Resources – As part of the programming process, identify any tools, equipment, plant, jigs, fixtures required to improve safety, quality and productivity and initiate procurement of these. • Capital Expenditure – Assist with justification/approval documentation for related capital expenditure.. • KPI’s – Meet project key dates for programming deliverables. • Other duties – perform ad hoc duties as may be required, commensurate with the grade of the post. Production Programmer - Qualifications, Knowledge, Experience & Skills: Essential • Good working knowledge of 2D and 3D CAD software (preferably Inventor) • Experience in press brake operating • Computer literacy • Understanding of relevant manufacturing processes • Good communication skills, including ability to work effectively within a team • Problem solving skills • Training and experience in the metal fabrication and parts manufacturing industry Desirable • Engineering/manufacturing qualifications (completed apprenticeship, HNC,HND, etc). • CADMAN-B software experience • Progress Plus MRP software experience • Experience working within an ISO 9000 quality management system

Our client has an opportunity for a Missile Mechanical Architect to join them on a contract basis for 6 months with likely extension. This exciting role is to gather and manage the missile mechanical architecture requirements to achieve missile performance, on time and on cost and overall layout vs compliance. This involves providing justification of the design and co-ordinate the verification evidence of missile performance to support certification. Role: Missile Mechanical Architect Location: Stevenage or Bolton, fully onsite. (must be happy to travel between locations) Hours: 37 per week Clearance: Full SC required before starting Hourly Rate: £60 per hour via Umbrella, inside IR35 What you'll be doing: Establishing the Missile Airframe Task Requirements Specification (TRS) to ensure a structured & coherent mechanical response to the overall Missile TRS Management of the mechanical interface with the launcher Management of Mechanical & Thermal Interfaces across the Missile Defining the optimum mechanical architecture for all variants of the missile, ensuring the mechanical architecture and interfaces meet requirements Implementation of GMA (Generic Missile Architecture) Policies to ensure Modularity & Reuse objectives are achieved Development of the overall proving logic for the validation of the Airframe Ensuring mechanical compliance to the Airframe TRS for missile certificate of design Interface with and manage customer expectations throughout the development process Producing Statements of Work and plans for activities within their sphere of responsibility Direct technical supervision of engineers within their team and indirect management of engineers in the extended project team Controlling assigned budgets, managing personal workload and identifying any further resource needs Requirements: Educated to degree level or an equivalent qualification having obtained significant experience of mechanical engineering Ability to technically manage internal & sub-contract activities Strong leadership skills, able to establish a clear engineering vision Good knowledge & experience of missile mechanical design, including: Static & Dynamic Analysis Design for Environment Thermal Management Good understanding of broader engineering disciplines, including: Aerodynamics Testability Production Experience developing proving logic and managing the generation of compliance evidence towards Certificates of Design Experience across the full Product Life Cycle Ability to influence senior managers and other stakeholders Strong interpersonal and well-developed communication skills (written & verbal) Willingness to travel within UK and Europe General competency with common IT systems (Outlook, Excell etc) If you are interested in applying for this position and you meet the requirements, please apply! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Join our Design team based in Worsley, supporting Northumbrian Water and other UK utility contracts. You’ll produce high-quality wastewater designs, working collaboratively to deliver safe, compliant and cost-effective infrastructure solutions that support essential services. This is an excellent opportunity to develop your technical expertise while contributing to a diverse portfolio of projects. • Monitor leading industry practices, recommend new design approaches, and identify upcoming trends., • Develop high-quality concepts, working with team on iterations and design, actively seek feedback from Creative and Business stakeholders, • Working on all design phases of projects, including project set-up, programming, design, and construction administration, • Collaborate with both internal design team, client design team and external consultants to execute creative projects, • Providing technical design support to other members of the design team., • Responding to and resolving issues with external parties such as the client, third party organisations & sub-contractors, • Represent the company and arrange pre-design and walk off meetings with the client., • Undertake site investigation reports and complete CDM documentation., • Ensure compliance with CDM 2015 throughout the design process., • Produce and make ongoing updates to the H&S file throughout various stages of the project ensuring that it is up to date and available at the end of the project. Competently produce detailed design & as-laid drawings using AutoCAD in accordance with the client's asset design standards and procedures., • Competently produce plan & longitudinal drawings to meet the clients design specifications, • Create private land notice plans in accordance with the clients’ processes and specification., • Liaising with the client ensuring the site investigation, design and construction phases runs according to plan and providing regular detailed updates to the Project Manager and the client., • Work alongside the Project Manager/ Operations Manager/ Design Manager to ensure all schemes are designed within budget and within the time constraints set by the client., • Engineering qualifications desirable however good experience would be considered., • Experience of working in the water industry on wastewater projects, • Proven experience in wastewater, CSOs, stormwater management, and wastewater networks., • Understanding and knowledge of relevant Engineering specifications that apply to the water industry, • Knowledge and Awareness of CDM 2015, • Proficient user of AutoCAD, • Competent in Excel, Word, PowerPoint, Outlook, • Strong analytical and problem-solving skills, • Ability to work as part of a team and to organise your workload across multiple projects, • Willingness to mentor and support less experienced colleagues We offer a competitive salary based on experience along with a full benefits package. Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners. We understand that privacy and the security of your personal information is extremely important. By applying for this role, you agree to the terms of our privacy policy. Network Plus is an award-winning business delivering essential utility and infrastructure services for the UK’s major providers of gas, power, telecoms, transport, water, and wastewater. We value the variety of experience, perspective, and other points of difference our workforce, clients, and supply chain offer. We are actively working with colleagues across the Network Plus Group to develop an inclusive environment – we want all our employees to feel valued and included to enable everyone to thrive at work and understand the value of their contribution matters no matter their background, identity, or circumstances.

At PubNub, we power real-time experiences used by millions of people around the world. Our platform enables businesses to build real-time applications through developer-friendly APIs and real-time infrastructure. PubNub powers the world's most engaging real-time experiences—including chat, live updates, and interactive applications—for more than 2,000 companies, including Verizon, Autodesk, Zillow, and Dropbox. Our global data network processes trillions of messages each month with sub-100 ms latency across 15+ data centers. Backed by $130M in funding, we're shaping the future of how the world connects. At PubNub, customer growth is a key part of our go-to-market strategy. As our Customer Lifecycle Marketing Manager, you'll own the marketing programs that help customers adopt more of our platform, realize greater value, expand their usage, and stay engaged throughout their journey. You'll lead lifecycle marketing initiatives focused on customer health, retention, expansion, and re-engagement, working closely with Customer Success, Account Managers, and our Go-to-Market Engineering (GTME) team. Success in this role means improving Net Revenue Retention (NRR), reducing preventable churn, and creating a steady pipeline of expansion opportunities across our existing customer base. If you enjoy turning customer insights and product usage data into relevant, well-timed marketing programs, this is a high-impact opportunity with significant ownership and room to grow. • Build customer lifecycle and nurture programs., • Design platform expansion and feature adoption campaigns., • Partner with GTME on customer health scoring., • Identify customer expansion signals using data., • Create ROI reports and value summaries for Account Managers., • Execute multi-team penetration campaigns within enterprise accounts., • Build win-back and customer re-engagement campaigns., • Analyze churn trends and improve retention strategies., • Partner closely with Customer Success and Account Managers., • Measure lifecycle program performance and optimize results. Minimum Requirements • 3+ years in B2B SaaS lifecycle, customer, or retention marketing., • Experience marketing to developer-focused audiences., • Data-driven approach to segmentation, timing, and measurement., • Hands-on experience with CRM and marketing automation., • Strong cross-functional collaboration with Customer Success and Sales. Nice to Have Skills • Experience using product usage data., • Familiarity with product-led growth programs., • Background driving expansion and Net Revenue Retention., • Experience supporting developer or technical customer bases., • Experience marketing to enterprise customers. At PubNub, you'll join a collaborative, people-first company where curiosity, ownership, and innovation are valued. We work across teams to solve meaningful challenges, create exceptional customer experiences, and build technology that powers real-time applications used around the world. As a remote-first company, we value flexibility, collaboration, and continuous learning. You'll work alongside talented colleagues who are passionate about solving complex problems and delivering meaningful impact for our customers. We offer competitive compensation and thoughtfully designed benefits to support your success and well-being. Applicants must be legally authorized to work in the United Kingdom. This is a fully remote position, with employment provided through an Employer of Record (EOR). PubNub is unable to provide visa sponsorship for this position. If you're excited about creating marketing programs that strengthen customer relationships, increase product adoption, and drive long-term growth, we'd love to hear from you. Join PubNub and help customers unlock the full potential of real-time technology. Candidates are expected to provide accurate, complete, and truthful information throughout the application and hiring process. Any material misrepresentation or omission may affect employment eligibility.

MBDA UK Ltd in Bolton offers a hybrid engineering role within design support. You will work as part of the design team interfacing with manufacturing and providing knowledge to support electronics design throughout the product lifecycle. The role emphasises autonomy, problem solving, and collaboration with stakeholders to ensure robust design for manufacture and successful delivery in a manufacturing environment. #J-18808-Ljbffr

BUUK Infrastructure in Woolpit is offering a Graduate - Engineering (Design) position as part of our three-year scheme.

A leading consultancy seeks a Graduate Building Services Engineer to work on varied UK and Caribbean projects. Ideal candidates hold a BS or MSc in Building Services Engineering and have a strong interest in design.

MBDA Bolton is seeking a Product Security Engineer to join the Security Engineering Department. You will contribute to secure product lifecycles, design robust security solutions across hardware, firmware and software, and work with cross‑functional teams to protect MBDA's IP and safeguard the Customer's through-life capability. The role offers hybrid working and a salary circa £60,000 depending on experience, with benefits including a company bonus, pension, flexible working, and enhanced #J-18808-Ljbffr

Advance TRS is seeking a Senior Civil Engineer to support civil engineering design across clean and waste water infrastructure projects in the UK. The role involves producing, checking and reviewing designs within regulated water environments and working within a collaborative design team on a variety of projects. The client emphasizes wellbeing, a supportive workplace, and opportunities for professional development, with flexible hybrid/remote working and Outside IR35 contract options. #J-18808-Ljbffr

This is an exciting opportunity for an Electrical Design Engineer with experience in high voltage (HV) connections design to join a major DNO framework. Schemes are from 33kV - 132kV and remote working is supported (with a preference for candidates to be based in Yorkshire). • Design and cost 33kV - 132kV network projects, such as new connections, asset replacement and diversions., • Analyse network issues and performance problems, developing technically robust, cost-effective solutions to improve network performance and reliability., • Assess generation connections and raise jobs for Witness Testing in accordance with relevant technical and operational requirements., • Prepare concise business cases in the required format and present them for authorisation within agreed timescales, supporting the timely delivery of the Production Plan., • Determine the appropriate Point of Connection (POC) for new load and generation enquiries on HV networks up to 132kV., • Undertake site visits, stakeholder meetings and other site-based activities as required to support project development and delivery., • Previous experience in HV connections or general HV network design between 33kV and 132kV with a DNO, IDNO or ICP, • Knowledge and application of Electricity Network Regulations and National Electricity Registration Scheme (NERS) requirements., • Understanding of DNO and IDNO design standards, technical requirements, and scheme approval processes., • Application of relevant ENA Engineering Recommendations and industry standards in network design., • Understanding of Grid Code requirements relating to protection settings and network protection., • Awareness and application of Health, Safety and Environment (HS&E) requirements within the electricity industry., • Understanding and application of CDM Regulations., • Degree in Electrical and Electronic Engineering (or equivalent)., • Driving licence. This is a great opportunity for an HV Design Engineer to join a respected power engineering consultancy with an excellent reputation for career development and progression on a significant DNO framework. #J-18808-Ljbffr

Rate: up to £60ph, UMB, inside IR35 Contract: 6 months Engagement: Umbrella (Inside IR35) Location: Stevenage or Bolton (1-2 days per week on site) Travel: Occasional travel to France may be required A leading organisation within the UK defence sector is seeking experienced Test Equipment Engineers to move into a system / sub-system management role. This position focuses on defining, managing, and delivering Test Equipment solutions across the full product lifecycle for complex defence programmes. You will act as the focal point for Test Equipment requirements, working closely with internal teams, suppliers, and customers to ensure compliant, high-quality test solutions are delivered into service. • Collate and manage Test Equipment requirements from internal, domestic, and export customers across the full product lifecycle, • Define, manage, and control Test Equipment requirements through development, delivery, and in-service support, • Assess design documentation to demonstrate compliance with CE certification requirements, • Support cross-functional teams to drive down test solution defects (PRs, CNs), • Track, manage, and report test solution defects and corrective actions, • Act as the primary interface between project teams and Test Equipment suppliers, • Manage and align customer expectations throughout the development lifecycle, • Support reporting on test solution time, cost, quality, and performance, • Degree-qualified (or equivalent experience) in Test, Electrical, or Electronic Engineering, • Strong background in Test Engineering, ideally including one or more of the following:, • Digital electronics and microprocessor systems, • Analogue electronics and RF, • Power electronics, • Test Equipment design, • Good working knowledge of:, • Product certification against CE directives, • Requirements capture using DOORS, • Structured test modelling techniques, • Project management and planning, • Proven ability to manage diverse and conflicting stakeholders, • Strong leadership and influencing skills across engineering and programme teams, • Excellent communication skills (written and verbal), • Proactive, determined, and delivery-focused mindset, • Willingness to travel when required, including occasional travel to France #J-18808-Ljbffr

We have an exciting opportunity for a passionate Mechanical Test Engineer to join our dynamic team within Manufacturing. • Salary : Circa £44,000 depending on experience, • Dynamic (hybrid) working : 4/5 days on site due to workload classification, • Security Clearance: British Citizen or a Dual UK national with British citizenship., • Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team., • Company bonus : Up to £2,500 (based on company performance and will vary year to year), • Pension : maximum total (employer and employee) contribution of up to 14%, • Overtime: opportunity for paid overtime, • Flexi Leave: Up to 15 additional days, • Flexible working: We welcome applicants who are looking for flexible working arrangements, • Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments, • Facilities : Fantastic site facilities including subsidised meals, free car parking., • Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more., • Providing technical support to Operations for environmental and mechanical testing of weapon systems in development and production, to ensure programme targets are met to agreed time, cost and quality requirements., • Providing environmental and mechanical test engineering technical support during design / development phases from initial concept through to Production Readiness Review and release to Operations., • Supporting test facility introduction and ensuring that configuration control of equipment and facilities is in place prior to use, generating risk assessments, supporting test specifications and operator instructions., • Support ESS (Environmental Stress Screening) and mechanical test with diagnosis of production test issues in conjunction with the Calibration & Maintenance department., • Evaluation of technical problems in order to develop proposals for test equipment investigations and corrective actions, including process improvements., • Working closely with Operations and other stakeholders to overcome any technical challenges and drive continuous improvement., • HNC level of qualifications or equivalent in Mechanical Engineering or a related subject., • An understanding of thermal, vibration and mechanical test principles and test equipment, • Leak testing experience including helium, vacuum and pressure drop testing., • Whilst not essential, experience in developing, deploying and supporting environmental and vibration test facilities would be beneficial., • Previous experience using PC-based vibration control systems would also be beneficial. This opportunity is for a Senior Test Engineer to join the Manufacturing Test Engineering organisation supporting environmental and mechanical testing of electrical/electronic weapon systems and sub-assemblies during development and production product lifecycle phases. The role sits under the Manufacturing UK Test Engineering functional organisation and is based at our state-of-the-art manufacturing facility in Bolton. • Minimum Qualification Level Level 4 or greater in Engineering (Aerospace or Mechanical), Physics or Maths., • The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives., • Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements., • Proven analytical and problem solving skills, with strong attention to detail and a supportive, collaborative and pro-active approach to test engineering., • Experience using vibration controllers and Eurotherm thermal controllers would be beneficial., • While not essential, an appreciation of electrical/electronic testing and experience in a defence aerospace manufacturing environment would be beneficial. Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. #J-18808-Ljbffr

Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. • Company bonus: Up to £2,500 (based on company performance and will vary year to year), • Pension: maximum total (employer and employee) contribution of up to 14%, • Overtime: opportunity for paid overtime, • Flexi Leave: Up to 15 additional days, • Flexible working: We welcome applicants who are looking for flexible working arrangements, • Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments, • Facilities: Fantastic site facilities including subsidised meals, free car parking and much more, • Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. You will act as part of the design team as one of the main interfaces to our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of electronics. Working within design support is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of these products to deliver support to our customers. You'll need to demonstrate a number of the following attributes: Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Proven experience in the design of the following disciplines:- Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions. Someone who will be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs. Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Experience in a manufacturing environment and supporting and resolving manufacturing issues and a view to implement Design for Manufacture improvements into the design. MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDAUK), Instagram (MBDAUK) and Glassdoor or visit our MBDA Careers website for more information. #J-18808-Ljbffr

You will be responsible for estimating the costs of a planned construction project in terms of the labour, equipment and materials required. You will prepare analytical estimates for Mechanical Engineering works, that are technically accurate and with an acceptable risk level, from outline drawings and specifications. This is an opportunity to participate in the design development to assess buildability, materials, innovation and cost effectiveness of proposals and provide high level pricing information early in the tender for optioneering and budgeting to ensure the most cost-effective solution offered. • Register and acknowledge receipt of enquiries, • Interpret and understand all project requirements from ITT documentation including technical and high level commercial elements., • Manage/monitor all aspects of bids/cost plans preparation, • Build up cost estimates for elements including: o Building Services Works including pipework and electrical work. o Fabrication Work o Site Installation o Preliminaries o Equipment and Sub Contract elements o Design Costs • Escalation & Risk Factors, • Co-ordinate content from others in the business and where required produce supporting documents to enhance the quality of bids and proposals, • Present detailed accurate estimating content for review and subsequent approval., • Attend post tender reviews and lead in presenting project handover content when new business is secured. Experience of UK HVAC preferred but not essential. If you have a broader MEP background we are keen to hear from you. Experience of the Nuclear industry would be advantageous. Flexibility is required to travel to client and sites as required. Our Core Competencies Our five Core Competencies set the foundation for collaboration, learning and development. They will help turn our Vision and Values into action; provide a common language to talk about our skills; and offer a common basis to drive success across our business. Grow Talent. Our goal as an organisation is to attract competent people, retain dedicated employees and develop talented colleagues within each operational level to build a future-ready company. Drive Results. To keep and grow our strong market position, we must transform our corporate strategy directly into measurable and sustainable results. Take Ownership. We strive to establish an appreciative culture in which all employees feel empowered and take responsibility. Embrace Change. To develop products and services that go beyond what is imaginable today. We, as an organisation, must be agile. As individuals we must remain curious. Inspire Customers. Creating value for our clients is a key component of our growth strategy. Therefore, client satisfaction should be an important motivator for us individually and collectively. For questions and further information, please contact Liz Bedford via Exentec Hargreaves is an Equal Opportunities Employer. We are committed to equal employment opportunities regardless of age, sexual orientation, gender, religion, race, ethnic origin, disability, marital status or parental status. We base all our employment decisions on merit, job requirements and business needs. #J-18808-Ljbffr

Manufacturing Engineer — 12 Month Contract Based in Bolton. Eligible for SC clearance. Are you an experienced Manufacturing Engineer with a Level 3 Apprenticeship or BEng, and SAP experience? This role is with a market-leading defence and aerospace company via ARM Recruitment. • Compilation and update of Manufacturing Instructions., • Design, commissioning, and proving of associated tooling., • Support the industrial validation process through the use of FMEA’s, FAI’s, etc., • Resolution of technical problems that may arise during the manufacturing process., • Route card changes as a result of rework activities., • Management of Configuration Control by embedding Design Modifications into the Manufacturing Instructions., • Support to the Non-Conformance Process using SAP., • Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21, with a formal further education certificate to HNC or equivalent in a relevant subject; OR, • BEng in a relevant Engineering degree; and SAP experience., • Ability to interpret design drawings to produce Manufacturing Build Instructions for both Skilled and Semi-Skilled operators., • Experience in electronic subassembly manufacture through to system level builds., • Experience with assembly processes for small/miniature electro-mechanical actuation systems., • Ability to work within and contribute to a team environment., • Ability to understand and respond to customer requirements., • Understand and work with company processes and procedures., • Strong communication within the team and across organization levels., • Manual handling training., • ESD training., • Mid-Senior level, • Contract, • Engineering and Manufacturing, • Defense and Space, • Manufacturing and Aviation and Aerospace Component Manufacturing Referrals increase your chances of interviewing at Advanced Resource Managers by 2x. Get notified about new Manufacturing Engineer jobs in Bolton, England, United Kingdom. #J-18808-Ljbffr

Manufacturing Engineering is part of the Operations directorate based at our Manufacturing Centre of Excellence. Manufacturing consists of Assembly, Integration and Test of all our products for the company. The products we make are delivered directly to the customer/end user and therefore manufacturing are vitally important to the delivery aspects of MBDAs business. Salary: £24,460 Dynamic working: 5 days per week on-site due to workload classification Security clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. This role is scheduled to close for applications at midnight on Monday 4th January 2027 but may close earlier depending on application volumes. • 1 year placement: Starting September 2027, that allows you to apply your university learning to real-world projects and technologies Perform well on your placement and you could secure a graduate role before your final year, • Company bonus: Based on company performance and will vary year to year, • Pension: Maximum total (employer and employee) contribution of up to 14%, • Overtime: Opportunity for paid overtime, • Annual Leave: 25 days plus option to purchase extra holiday, • Flexi Leave: Up to 15 additional days, • Facilities: Fantastic site facilities including subsidised meals, free car parking and much more..., • Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. Manufacturing Engineers work closely with design to influence the producibility of designs. They are also responsible for the ‘how’ we build our products including being responsible for: • Any tooling required to build our products., • Instructions on how to build our products., • The cost of manufacture of our products., • The industrial validations of our production lines and our suppliers., • Day-to-day support of our operators building our products., • The architecture of the production lines., • Developing new manufacturing processes. Each day for a Manufacturing Engineer is different, it is a mix of time spent on the shop floor and office based working. There are also opportunities to travel to other MBDA sites and countries, plus visiting suppliers. As part of dynamic working there may be opportunities to do some work remotely, however due to the nature of the job, there will always be a requirement to work on site some of the time. In Manufacturing, you are also able to not only see but also be part of the realisation of our products. • Current undergraduate studying towards a degree in Physics or Maths or various Engineering degrees (Aerospace, Mechanical, Manufacturing, Systems, Electrical/Electronic and General)., • An ‘Engineering Mind-set’., • This is the ability to take technical information and turn it into something that can be used in building our products, the ability to find improvements and cost saving in the production of our products, the problem solving when something needs fixing., • Training in the use of tools will be provided, as necessary, but previous use of tools such as Simul8, MRP tools (SAP), Engineering Drawing tools (Creo), Configuration Control would be an advantage. Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDAUK), Instagram (MBDAUK) and Glassdoor or visit our MBDA Careers website for more information. What we do matters. Because defence matters. As a leading company in the defence industry we support our nations by delivering essential military capabilities, both for today and the future. We are proud to be an award-winning employer and are proud of the growing diversity of our workforce. Our people are the ones who drive our constant innovation and deliver against challenging targets. Whatever your background, we welcome your application to MBDA UK and look forward to speaking with you soon. #J-18808-Ljbffr

We have an exciting opportunity for a passionate Mechanical Test Engineer to join our dynamic team within Manufacturing. Salary: Circa £44,000 depending on experience Dynamic (hybrid) working: 4/5 days on site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. • Company bonus: Up to £2,500 (based on company performance and will vary year to year), • Pension: maximum total (employer and employee) contribution of up to 14%, • Overtime: opportunity for paid overtime, • Flexi Leave: Up to 15 additional days, • Flexible working: We welcome applicants who are looking for flexible working arrangements, • Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments, • Facilities: Fantastic site facilities including subsidised meals, free car parking., • Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. Providing technical support to Operations for environmental and mechanical testing of weapon systems in development and production, to ensure programme targets are met to agreed time, cost and quality requirements. Providing environmental and mechanical test engineering technical support during design / development phases from initial concept through to Production Readiness Review and release to Operations. Supporting test facility introduction and ensuring that configuration control of equipment and facilities is in place prior to use, generating risk assessments, supporting test specifications and operator instructions. Support ESS (Environmental Stress Screening) and mechanical test with diagnosis of production test issues in conjunction with the Calibration & Maintenance department. Evaluation of technical problems in order to develop proposals for test equipment investigations and corrective actions, including process improvements. Working closely with Operations and other stakeholders to overcome any technical challenges and drive continuous improvement. HNC level of qualifications or equivalent in Mechanical Engineering or a related subject. An understanding of thermal, vibration and mechanical test principles and test equipment Leak testing experience including helium, vacuum and pressure drop testing. Whilst not essential, experience in developing, deploying and supporting environmental and vibration test facilities would be beneficial. Previous experience using PC-based vibration control systems would also be beneficial. • Minimum Qualification Level Level 4 or greater in Engineering (Aerospace or Mechanical), Physics or Maths., • The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives., • Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements., • Proven analytical and problem solving skills, with strong attention to detail and a supportive, collaborative and pro-active approach to test engineering., • Experience using vibration controllers and Eurotherm thermal controllers would be beneficial., • While not essential, an appreciation of electrical/electronic testing and experience in a defence aerospace manufacturing environment would be beneficial. Peace is not a given, Freedom is not a given, Sovereignty is not a given. MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. #J-18808-Ljbffr #J-18808-Ljbffr

Today, Assystem is among the top three independent nuclear engineering firms worldwide. With over 60 years of experience in highly regulated sectors, the group supports public and industrial stakeholders in the execution of complex and strategic infrastructure projects, subject to high safety and security requirements. Assystem mobilizes 8,000 experts in 13 countries and intervenes across the entire project lifecycle, in engineering, project management and digital solutions. Join the Fusion and Modular Nuclear Business Unit! In this role, you'll lead technical projects by managing engineering interfaces, ensuring cohesive design integration, and refining architectural frameworks. You'll liaise with stakeholders, handle requirements, and support early-stage activities like optioneering and design concept development, collaborating closely with a dynamic project management team. • Coordinate the creation of critical artefacts such as operations concepts, functional and system architectures, requirement and compliance statements, and verification and validation planning., • Conduct optioneering assessments and design risk assessments (safety and CDM) to ensure robust project planning., • Support integrated technical management by navigating technical and project risks, refining design configurations, and developing breakdown structures., • Respond promptly to technical queries, ensuring clarity and swift resolution., • Liaise seamlessly with all disciplines to achieve unified design coordination., • Apply cutting‑edge systems engineering best practices to elevate team capabilities., • Develop and propose innovative Model-Based Systems Engineering (MBSE) approaches for streamlined processes., • Report progress on deliverables and provide strategic resource level recommendations to the Project Lead Engineer (Systems and Integration)., • Over 55 years in nuclear engineering., • Ranked among the top 3 largest nuclear engineering companies., • Attractive social benefits, including an engaging Employee Committee and holiday bonuses., • Ongoing training with numerous career opportunities., • 70% of our managers are promoted internally., • Hybrid work: 1–2 days remote per week. Due to the nature of the work, applicants must meet UK security clearance criteria. Ready to make a difference in the nuclear engineering world? Join us and be a part of the future of nuclear and fusion innovation! We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter! Bring your unique contributions and help us shape the future. #J-18808-Ljbffr

At Dalkia, we're driven by a shared purpose: tackling climate change and building a better, more sustainable future. We bring together talented people who share knowledge, challenge each other and grow together. Backed by EDF, Britain's biggest generator of low carbon electricity, we're a people-first culture. With 5,000+ employees and £600m+ turnover, we combine the strength of a major group with a great culture, innovative mindset and inclusive values making Dalkia a great place to work and grow your career. We're on the hunt for an experienced Electrical Project Engineer to join our Manchester team working on our high‑profile defence project. At Dalkia Engineering, we pride ourselves on designing, delivering, and commissioning electrical and mechanical installation systems in a variety of industry-leading buildings. Your role as Electrical Project Engineer will support and coordinate technical compliance during design development, procurement, modelling, drawing, installation, testing, and commissioning activities, in line with the agreed project brief, specifications, and industry regulations. Working under the direction of the Project Manager and Senior Project Engineer, you will apply your technical knowledge and experience of complex buildings while supporting compliance with the Building Safety Act and project quality requirements • Coordinate and review electrical design information, raising RFIs and technical queries to ensure compliance, • Support the delivery of electrical procurement packages, including technical evaluations and tracking of deliveries, • Review electrical shop drawings, material submittals, and method statements and make recommendations for approval, • Monitor electrical works against the programme, highlighting delays or constraints, • Monitor and support onsite electrical installations, checking workmanship and conformity, • Assist with electrical material take-offs and procurement schedules, • Support BIM coordination activities and assist with electrical clash resolution, • Support implementation of health & safety requirements, including RAMS input, • Maintain accurate electrical QA/QC records, including inspections, test sheets, and NCRs, • Coordinate and support electrical testing and commissioning activities under senior supervision, • Provide technical input to support commercial variation assessments Are you a motivated, detail‑focused Electrical engineer with a strong interest in M&E building services, particularly electrical systems within complex buildings? You'll enjoy working as part of a collaborative project team and be keen to develop your technical and project delivery experience across some high profile projects. You'll have an HNC/HND in electrical engineering or building services as well as a valid CSCS card. A degree in electrical or building services engineering is desirable but not essential. • Strong communication skills with the ability to explain technical issues in simple terms, writing clear reports, RFIs, and emails, working collaboratively between Electrical and mechanical teams., • Efficient organisation and time management being able to manage multiple tasks, track deadline deadlines, drawings, and procurement activities., • Problem-solving ability – analyse problems and propose practical solutions for review., • Attention to detail – careful checking of drawings, specifications, installation quality, commissioning, and health & safety procedures., • Technical curiosity and continuous learning – interest in new technologies, learning new standards and regulations. People First – It starts with health, safety and wellbeing Better Together – A collaborative team Trusted Partners – Dedicated to our clients' success Taking Responsibility – Making a positive difference We're committed to an inclusive and fair recruitment process. If you need any adjustments please let us know, in confidence, our team is here to support you. #J-18808-Ljbffr

Fantastic opportunity to take ownership of manufacturing engineering processes and equipment to make improvements to production whilst developing new skills and techniques Salary: Circa £43,500 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: SC & British Citizen or Dual National Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: • Company bonus: Up to £2,500 (based on company performance and will vary year to year), • Pension: maximum total (employer and employee) contribution of up to 14%, • Overtime: opportunity for paid overtime, • Flexi Leave: Up to 15 additional days, • Flexible working: We welcome applicants who are looking for flexible working arrangements, • Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments, • Facilities: Fantastic site facilities including subsidised meals, free car parking., • Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. The opportunity: An opportunity has arisen on the development/production manufacturing lines, for a support engineer who would be responsible for translating design requirements into user instructions including the development of the project manufacturing architecture. You will coordinate with the day to day operations staff within the manufacturing facility. The opportunity also allows you to grow your knowledge within manufacturing as part of our development into future opportunities. Industrial Validation, manufacturing architecture and factory of the future principles are some of the work packages that provide stretched objectives for such growth. Working with the Principal Engineer, you will be working on multiple projects, responsible for manufacturing problem identification and resolution: • Support existing manufacturing lines and new product introduction, • Support the industrial validation process through the use of FMEA's, process proving activities etc., • Management of configuration control by the embodiment of design modifications into the manufacturing documentation and industrial validation, • Support the non-conformance process, • Ensure products are produced with consideration to safety, efficiency and economic factors, • Assume the responsibilities for safe operating implementation for changed processes, including liaising with COSHH assessors, SHE and Human Factors, • Liaise with the design authority during the product prototype/development phase, to ensure optimised Design for Manufacture (DfM), • Compilation and update of Manufacturing Instructions maintaining production BOMs, • Tooling development and control What we're looking for from you: • Electrical or Mechanical Engineering/Manufacturing Apprenticeship (Advanced Level or L3 Standard) & • Electrical or Mechanical Engineering/Manufacturing Level 4 academic qualification (HNC, diploma, etc.) & • Electrical or Mechanical Engineering/Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved Or • Degree in a relevant subject., • Must demonstrate a proactive approach to problem solving and commitment to work to meet our delivery milestones., • Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions., • Must be able to work within and contribute to a team environment., • Awareness of digital communication platforms to work and communicate effectively within the workplace. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more… We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDAUK), Instagram (MBDAUK) and Glassdoor or visit our MBDA Careers website for more information. #J-18808-Ljbffr

Oldham / Manchester | Permanent | Excellent Salary + Benefits Mech Electrics are recruiting for a long-standing client we've proudly worked with for over 15 years, helping them recruit engineering professionals as the business has grown into one of the UK's leading specialists in critical infrastructure. We're now looking for an experienced Mechanical Design Engineer to join their expanding Critical Infrastructure team. This is a particularly interesting opportunity for a Mechanical Building Services Engineer who wants to see their designs become reality. Rather than working solely within consultancy, you'll become involved across the complete project lifecycle - developing tender concepts, progressing secured projects through detailed design and ultimately supporting construction, commissioning and handover. You’ll design mechanical infrastructure for technically demanding environments where resilience, efficiency and reliability are fundamental. Projects are predominantly within the Data Centre and Critical Infrastructure sectors and include sophisticated cooling and mechanical systems designed around resilient, continuously operational environments. You’ll work closely with clients, contractors, specialist suppliers and the wider in-house engineering team, with the opportunity to act as Lead Mechanical Designer on mechanically biased projects. • Develop mechanical designs from tender concept through detailed construction stages., • Design chilled water and high-efficiency cooling systems for critical environments., • Produce mechanical schematics, specifications, calculations and technical submissions., • Develop designs through the relevant RIBA stages and support construction delivery., • Review client specifications, drawings and technical requirements., • Carry out site surveys and develop practical engineering solutions., • Coordinate with contractors, specialist suppliers, system integrators and other designers., • Review technical and material submissions and support commissioning activities., • Contribute technically to tenders, proposals and client presentations., • Attend client and project meetings and confidently explain engineering solutions. We’re looking for someone with a genuine Mechanical Building Services background and a good understanding of how systems are designed, installed and commissioned. Ideally you’ll have: • HNC/HND, degree or equivalent experience within Mechanical or Building Services Engineering., • Strong mechanical design knowledge, particularly HVAC, cooling and associated building services., • Experience within Data Centres or Critical Infrastructure would be highly advantageous, but isn’t essential., • A practical, commercially aware approach and confidence dealing directly with clients. Experience may have been gained with an M&E contractor, specialist contractor or Building Services consultancy. For consultancy candidates, we’re particularly interested in people who enjoy getting close to construction and seeing their engineering solutions delivered on site. This isn’t a role where you’ll spend your career producing drawings that disappear into somebody else’s construction team. You’ll work within an engineering-led contractor where Design, Pre-Construction and Operations work closely together, giving you visibility of projects from the first client conversation through to completed installation. The business continues to grow across the UK and internationally, providing genuine long-term progression for technically ambitious engineers. We’ve recruited for this business for over 15 years and can give you genuine insight into the company, its projects, culture and career opportunities #J-18808-Ljbffr

We are seeking an experienced Senior Primary Design Engineer to lead and deliver high-quality primary engineering designs for HV substations and power infrastructure projects. Working for the specialist power engineering arm of a FTSE 250 company, you will play a key role in technical delivery, mentoring junior engineers, and working closely with project managers, clients, and multidisciplinary teams. This role is available on a hybrid or remote basis, offering flexibility while remaining closely connected to project teams and clients. • Lead the design and development of primary engineering solutions for HV substations and associated infrastructure, • Produce and review primary design deliverables including layouts, GA drawings, equipment specifications, and technical reports, • Ensure designs comply with relevant standards, client specifications, and safety requirements, • Provide technical guidance, checking, and mentoring to junior engineers, • Interface with clients, contractors, and internal stakeholders throughout the project lifecycle, • Support project planning, cost estimates, and risk assessment, • Contribute to continuous improvement of design processes and standards, • Degree-qualified in Electrical Engineering or a related discipline, • Significant experience in primary design within HV substations (e.g. 33kV-400kV), • Strong knowledge of UK / international standards and utility requirements, • Proven ability to lead design tasks and review the work of others, • Excellent communication and stakeholder management skills, • Chartered or working towards Chartered Engineer status (desirable), • Competitive salary and benefits package, • Hybrid / remote working options, • Opportunities for career progression and professional development, • Exposure to major infrastructure and energy transition projects, • Supportive and collaborative team environment, under the leadership of a supportive and inspiring manager If you're ready to take the next step in your engineering career, we'd love to hear from you. *salary based on skills and experience required for the role #J-18808-Ljbffr

We have an exciting opportunity for an Electric Network Design Engineer to join our company. The role can be based at any of our regional offices in the Northwest, Northeast, Midlands, or Yorkshire. Aptus Utilities are seeking to recruit a strong team player and multi-tasker to join us in the role of Electric Network Design Engineer, working directly under the guidance of and reporting to one of our Design Managers. The ideal candidate will have strong electrical network design awareness and be able to demonstrate previous experience within the utility industry. • Designing individually tailored HV/LV electrical network design solutions and earthing assessments for LV and HV distribution networks for domestic, commercial and industrial developments (Single Line Diagrams, circuit diagrams, general arrangements, wiring diagrams, block cable diagrams/schedules, cable specification sizing calculations, etc.)., • Obtaining approval for individually tailored network design solutions including power distribution earthing., • Provision of specialist electrical network/substation engineering advice to project stakeholders., • Participate in multi-utility design handover to the Operations Department, providing any subsequent support and guidance through to final network connection., • Responsible for the technical compliance of electrical network design to meet the client’s requirements, ensuring they satisfy company quality requirements, are compliant with current DNO/IDNO policy, ENA Documentation, CDM Regulation, Codes of Practice, National/International Standards and legislation, company policy/procedures and contract specification, including safety compliance, as appropriate., • Prioritising workflow, ensuring high quality network designs and projects are completed accurately, delivered on time, within budget, enhancing the professional image and reputation of the company in the marketplace., • Undertake internal technical peer review of designs, prior to design submission., • Liaise closely with Utility Infrastructure Providers, equipment manufacturers and the DNOs/IDNOs., • Supporting the Tendering Department and where required provide outline designs., • Developing and maintaining relationships with new and existing Clients., • Engage with Gas and Water Designers to coordinate the delivery of multi-utility design projects., • Mentor, coach and guide trainee engineers., • Suitable engineering qualification (Degree, HND or equivalent)., • Understanding of UK residential developments with IDNO / DNO networks., • Experience in designing/planning LV and HV electrical utility network infrastructure and substation design., • Excellent communication and interpersonal skills with the ability to manage multiple diverse projects simultaneously., • Minimum 5 years’ experience designing LV/HV electrical networks., • Good understanding of UK power industry including technical standards DNO/IDNO network construction requirements, including a knowledge of G81 documents., • Knowledge of technical specifications of equipment, substations, cables and plant., • An understanding of DNO protection requirements would be beneficial., • Understanding of the current NERS requirements and be able to provide compliance support., • Prioritise workflow to ensure that individual projects are completed accurately, on time, within budget and in accordance with KPI metrics., • Self‑motivated, with the ability to analyse complex electrical data and information., • Ability to provide the highest levels of customer service, achieving maximum customer satisfaction., • High level of accuracy and attention to detail., • A team player with the ability to work independently and resolve any design issues., • Benefits include cashback plans including eye‑care, dental and prescriptions, to name just a few. Please see our benefits brochure for further details., • Gym, fitness and retail discounts., • Donate a Day – we will gift you an extra day off each year to do something for charity or within the community., • Mentoring and ongoing guidance, not only to settle you into your role but throughout your career with Aptus., • We promote physical and mental health and provide additional support to our employees via our Employer Assistance Program all year round., • Northwest (BL5 3XP), • Northeast (NE10 8YG), • Midlands (WS7 3FT), • Yorkshire (WF6 1TA) Please send your CV and contact details to . If you are shortlisted for this role, you will be contacted by a member of our People Team or the Hiring Manager, who will usually arrange a short telephone interview before arranging a face‑to‑face interview. #J-18808-Ljbffr

Bury | £35,000 - £38,000 + benefits | 4.5 day week I'm working with a growing engineering and manufacturing business in Bury who are looking to add a Design Engineer to their team following an internal change. This is a really hands-on design role, working on bespoke commercial vehicle conversions and taking designs from the initial brief through to manufacture. You'll be working closely with the wider engineering and production teams, so it's a great opportunity for someone who enjoys seeing their designs come to life rather than being sat behind CAD all day. You'll be responsible for designing and developing bespoke vehicle conversion solutions, producing 3D models and manufacturing drawings and working closely with the shop floor to ensure designs can be built efficiently and effectively. You'll also: • Produce 3D models, assemblies and detailed engineering drawings, • Develop designs for bespoke commercial vehicle conversions, • Work closely with production and engineering teams to understand how products are built and identify the best solutions, • Create manufacturing information and instructions, • Support CNC cutting processes, with training provided where required, • Make improvements to existing products and develop new design solutions, • Manage design changes and ensure relevant information is kept up to date, • Work across multiple projects with quick turnaround times, • Get involved in problem solving and troubleshooting on the shop floor, • Look for ways to improve processes, simplify designs and reduce costs We're looking for someone with a background in mechanical/product design who enjoys working in a fast-paced, practical manufacturing environment. You'll ideally have: • Previous experience in a Design Engineer, Mechanical Design, Product Design or similar role, • Strong 3D CAD experience - the specific package is less important, • Experience working within a manufacturing or engineering environment, • A practical understanding of how products are designed and manufactured, • The ability to interpret drawings and understand how components and assemblies fit together, • Strong attention to detail, • Good Microsoft Office skills, particularly Excel, • The confidence to communicate with people across engineering, production and operations, • A proactive approach, with the ability to work independently and take ownership of your designs, • Experience with CNC, automotive, vehicle conversions, electrical systems or Inventor would be advantageous, but isn't essential. Most importantly, you'll need to be comfortable working at pace. Designs can have short turnaround times, so this will suit someone who enjoys variety, can manage pressure and is confident making decisions and taking accountability for your work. This is a growing business with a strong reputation within its sector, and the engineering team is continuing to develop and improve the way it works. You'll join an experienced team where you'll have plenty of autonomy and the opportunity to make a genuine impact. They're also investing in new processes, templates and systems, so this is a good time to join if you're someone who enjoys change and being part of improving how things are done. • £35,000 - £38,000 salary, • 4.5 day working week, • Monday-Thursday: 7am-4:30pm, • Friday: 7am-11am, • Flexible start time available, • 32 days holiday, • Profit share scheme, • Free on-site parking, • Private GP and critical illness cover, • Salary exchange pension, • EV car scheme, • Company events and incentives, • Training and development #J-18808-Ljbffr

Important: the job title “Associate” at Hoare Lea refers to a senior-level position (not an entry-level role); please check the role description for responsibility and seniority. Hoare Lea is a human-centric and planet-conscious engineering consultancy. We offer intelligent and sustainable solutions to complex design challenges for the built environment throughout the UK and further afield. We provide a wide range of engineering and consultancy services, including acoustics, air quality, building services (MEP), fire, lighting, security and sustainability to name but a few. Together, our highly skilled teams use technical expertise and problem-solving skills to bring buildings to life. We ensure that whatever the building, its design is outstanding, and its operations meet the needs of the communities it serves. We are as committed to providing an environment where everyone can realise their unique potential. So, in joining Hoare Lea, you will experience a business that enriches your knowledge, supports your wellbeing, and welcomes your individuality. You’ll have the opportunity to participate in our 9-day fortnight scheme, thriving community groups, varied social and networking events, and extensive professional and technical development schemes. We also offer an extensive benefits package, including private medical cover, an electric vehicle salary sacrifice scheme, stock options, and 25 days of annual leave (increasing with service), alongside flexible and hybrid working. Whatever your ambitions or circumstances, our aim is to enable everyone to develop their knowledge, give their best, and enjoy what they do. We have an opportunity for an Associate or Senior Associate Electrical Engineer to play a key role in delivering high quality, sustainable electrical engineering solutions across multiple projects in the built environment. You will join our Electrical team based in our Manchester office. We have a well-established reputation for delivering outstanding design on built environment projects throughout the North. We have maintained an office in Manchester for many years, developing strong relationships with clients across the region, and working on a variety of local, regional and international projects. We are a recognised leader in the built environment, shaping some of the most ambitious and technically demanding projects across the residential, hospitality, leisure, commercial, and complex engineering sectors. Our work spans cutting-edge healthcare and research facilities, high-performance data centres, critical infrastructure and state-of-the-art manufacturing and technology environments projects that push boundaries and deliver real-world impact. Driven by a commitment to excellence, we combine innovation, technical expertise, and practical delivery to create solutions that are not only robust and reliable, but forward-thinking and sustainable. Our teams work at the forefront of the industry, collaborating with leading clients across the public and private sectors, both locally and internationally. Working alongside a range of specialist engineers and consultants, you will be joining a collaborative, knowledgeable, highly engaged team who love what they do, and offer a supportive, flexible, and high-performing work culture. We are seeking an Associate Electrical Engineer or Senior Associate Electrical Engineer to lead client relationships and deliver technically excellent, commercially sound electrical design across building services projects. This vacancy will suit an experienced Associate who manages project delivery and client engagement, or a Senior Associate who leads larger, multi-disciplines schemes, contributes to business development and helps shape a high performing local team. In this key and varied role, you can expect to: • Act as primary client contact for projects; define and agree briefs and represent Hoare Lea professionally at project meetings., • Promote Hoare Lea’s services to create opportunities and support client objectives., • Lead and coordinate project teams (including specialist groups), prioritise workloads and host/ chair internal project meetings., • Deliver profitable, high‑quality schemes; monitor project expenditure, report costs and resource needs to line managers/partners., • Delegate, review and check work from junior staff; contribute to staff development and performance objectives., • Maintain awareness of consultant appointment conditions, procurement routes and commercial risks; identify and mitigate business risks., • Contribute to technical knowledge sharing across the firm and ensure technical accuracy and compliance with relevant standards., • Build and maintain effective relationships with clients, consultants and contractors to support repeat business and growth. Additional responsibilities for Senior Associate: • Lead larger scale, multi‑discipline schemes, attend interviews and support bid preparation., • Support development and leadership of the local team and report regularly to senior management. To be successful in this role you’ll need: • Degree in Electrical/Building Services Engineering or equivalent., • Chartered status required for Senior Associate, desirable/working towards for Associate., • Extensive project & client leadership experience., • Strong technical competence in electrical building services, working to applicable regulations and design guides., • Ability to lead integrated design teams, coordinate with other disciplines and deliver technically accurate designs., • Excellent client‑facing, written and verbal communication skills; able to manage difficult situations., • Demonstrable commercial awareness: monitor project costs, identify/mitigate risks and contribute to profitable delivery., • Proven people leadership: motivate, delegate and develop team members — leads projects (Associate) or leads teams and local practice (Senior Associate)., • Highly organised with strong planning skills; able to work under own initiative and deliver to demanding timescales., • IT literate with proficiency in industry software and BIM workflows., • Committed to continuous professional development and knowledge‑sharing. If there are adjustments or accommodations that we can put in place to help you participate and give your best at any stage of the recruitment process (whether relating to disability, neurodivergence or anything else) please let us know. We have updated our terms and conditions for candidates, click here to find out more. We have a Preferred Supplier List of trusted partners who assist us when required. We do not acknowledge speculative CVs or unsolicited candidate introductions from agencies not on the list. #J-18808-Ljbffr

Location - Manchester Salary/Package - £55,000 - £75,000 + Excellent Benefits Package Our client is a leading specialist contractor operating within the faade and building envelope sector, delivering high-quality cladding, faade remediation, external wall insulation, and fire remediation projects across the UK. Working alongside leading developers, main contractors, housing providers, and public sector organisations, they have built an excellent reputation for delivering technically complex schemes safely, efficiently, and to the highest standards. With expertise spanning both new-build and remediation projects, the business continues to experience significant growth, driven by increasing demand across the faade sector. As part of their continued expansion, they are now seeking an experienced Cladding Estimator to join their pre-construction team. As Cladding Estimator, you will be responsible for: Preparing accurate and competitive estimates for cladding, faade, and building envelope projects Reviewing drawings, specifications, and tender documentation Producing detailed take-offs, cost plans, and pricing schedules Obtaining competitive quotations from suppliers and subcontractors Identifying value engineering opportunities while maintaining quality and compliance Assessing commercial and technical risks throughout the tender process Preparing comprehensive tender submissions within agreed deadlines Working closely with design, commercial, and operational teams Supporting client meetings and tender interviews where required Building strong relationships with clients, consultants, suppliers, and subcontractors The successful Cladding Estimator will have: Proven experience as an Estimator within the cladding, faades, roofing, glazing, or building envelope sector Strong understanding of faade systems, rainscreen cladding, EWI, or remediation projects Excellent commercial awareness and analytical skills Experience interpreting construction drawings and specifications Strong negotiation and communication skills The ability to manage multiple tenders and work to tight deadlines A proactive, organised, and commercially focused approach Relevant construction, estimating, or quantity surveying qualifications would be advantageous Competitive basic salary of £55,000 - £75,000 Attractive benefits package Opportunity to join a growing specialist faade contractor Exposure to technically challenging faade and remediation projects Long-term career progression within an expanding business Collaborative and supportive pre-construction team We welcome applications from individuals of all backgrounds, experiences, and identities. Our recruitment process is designed to ensure equal opportunities for all candidates, regardless of age, gender, race, ethnicity, religion, disability, sexual orientation, or any other characteristic. INDCOM JBRP1_UKTJ #J-18808-Ljbffr

From the steel in our first reinforced bridge in 1903, to railway sensors, we work with government authorities, asset owners, construction companies, and design offices to support their infrastructure projects. Our systems are found in iconic projects such as The Golden Gate Bridge, Panama Canal, Kap Shui Mun Bridge, and Freedom Tower. An exciting opportunity has arisen for a recently qualified Quantity Surveyor to join DYWIDAG's Commercial Team. Working across our Repair & Strengthening, Structural Health Monitoring (SHM), and Geotechnical businesses, the successful candidate will support both the pre-contract and post-contract commercial functions of the organisation. This role offers excellent exposure to a diverse range of infrastructure projects, including bridge strengthening, structural monitoring, geotechnical investigations, instrumentation and monitoring, and specialist construction works. The successful candidate will be responsible for preparing competitive and commercially robust tenders, whilst also supporting the financial management and commercial delivery of live projects. The role is primarily based in Bury but will require occasional attendance at our Southam and London offices, together with periodic visits to customer sites and project locations. • Review Invitations to Tender (ITT), specifications, drawings and supporting documentation., • Prepare detailed estimates and pricing submissions from first principles., • Obtain and evaluate quotations from subcontractors and suppliers., • Develop labour, plant, material and subcontract cost build-ups., • Identify project risks and opportunities and incorporate these into tender submissions., • Assist in the preparation of programmes, methodologies and commercial submissions., • Ensure tender submissions are completed accurately and submitted on time., • Maintain comprehensive records and supporting documentation for all estimates and bids., • Liaise with operational, technical and engineering teams to develop competitive proposals., • Prepare and submit monthly applications for payment., • Assess the value of work completed and monitor project performance against budget., • Manage subcontractor and supplier accounts, including payment assessments and certification., • Prepare, negotiate and agree variations and compensation events., • Support project teams with contract administration and commercial advice., • Produce Cost Value Reconciliations (CVRs) for larger projects., • Monitor project costs, revenue and forecast margins., • Assist in the preparation and management of project budgets and forecasts., • Support the management of contractual notices and documentation., • Contribute to project reviews and financial reporting processes., • Build strong working relationships with clients, subcontractors and suppliers., • Work closely with project managers, engineers and operational teams., • Participate in internal project reviews and commercial meetings., • Provide commercial support across multiple business units and project teams., • Degree qualified in Quantity Surveying or a related commercial discipline., • Recently qualified Quantity Surveyor or early-career commercial professional., • Strong numerical and analytical skills., • Good understanding of construction contracts and commercial principles., • Proficient in Microsoft Excel and Microsoft Office applications., • Excellent attention to detail and organisational skills., • Strong written and verbal communication skills., • Full UK driving licence., • Willingness to travel occasionally to sites and other company locations., • Experience working within civil engineering, infrastructure, rail, structural repair, monitoring, or geotechnical sectors., • Knowledge of NEC forms of contract., • Experience preparing estimates and cost plans., • Working towards or membership of RICS, ICES or a similar professional body., • Familiarity with CVRs, applications for payment and variation management., • Exposure to a wide variety of infrastructure and civil engineering projects., • Opportunities to work across multiple specialist business units., • Structured professional development and mentoring., • Support towards professional accreditation and career progression., • A collaborative working environment with experienced commercial and operational teams. This role provides an excellent platform for a recently qualified Quantity Surveyor to develop into a Senior Quantity Surveyor or Commercial Manager through exposure to tendering, project controls, contract management and commercial leadership across multiple specialist infrastructure sectors • 100% of tender submissions delivered on or before client deadlines., • Tendered margins achieved within agreed tolerance following project award., • Variance between estimated and actual project costs monitored and reported., • Achievement of agreed annual tender conversion rate (by value and number of projects)., • Contribution to securing profitable work across all business units., • Supplier and subcontractor quotations obtained for all significant cost elements., • Complete estimating records and supporting documentation maintained for all submissions., • 100% of applications submitted in accordance with contract requirements and agreed dates., • Achievement of target debtor days., • Prompt resolution of payment queries and commercial disputes., • Variations identified, priced and submitted within contractual timesc #J-18808-Ljbffr

Senior C++ / C# Software Engineer in Bolton to join a technical team delivering software for manufacturing, testing and operations.The role focuses on design, development, integration and verification of Windows-based applications.You will collaborate with multidisciplinary engineering teams to crea

Bolton | Hybrid – 1-2 days a week onsite Automation | LLMs | n8n or comparable workflows Make/Zapier/Workato/Node-Red We're looking for an experienced AI & Automation Engineering Lead to lead an established team of three AI Engineers and help shape how AI and automation is developed and adopted across the business. This is an opportunity for someone who enjoys being hands‑on technically but also wants to take ownership of how an AI and Automation capability develops. You'll provide technical direction, lead the team and work with stakeholders across the organisation to identify opportunities where AI and automation can deliver genuine business value. You'll also be responsible for establishing the frameworks, standards and reusable approaches that allow the business to deliver AI and automation solutions consistently, securely and at scale. • Leading and developing an established team of three AI Engineers, providing technical guidance, mentoring and support, • Providing technical leadership across AI solution architecture, model design and deployment, • Remaining hands‑on with the design and delivery of AI and automation solutions, • Developing frameworks, standards and reusable assets across the AI and Automation practice, • Integrating LLMs and AI agents into business processes and existing systems, • Supporting the scoping, planning and delivery of AI initiatives, ensuring they deliver measurable business outcomes, • Working with stakeholders to identify opportunities and shape the AI adoption roadmap, • Ensuring appropriate data governance, security, compliance and responsible AI practices are embedded into delivery, • Overseeing the reliability, performance and scalability of AI and automation solutions, • Strong hands‑on experience with n8n or a comparable workflow automation platform, such as Make, Power Automate, Zapier, Workato or Node‑RED, • Experience integrating LLMs or AI agents into business processes, • At least 2 years' experience leading AI or data science teams, • Strong knowledge of AI/ML concepts and their practical applications, • Experience delivering AI solutions end‑to‑end, from initial design through to deployment, • Experience establishing technical frameworks, standards and best practicesStrong understanding of AI solution architecture and deployment approaches, • Expertise in data governance, security and compliance, • Experience with cloud platforms such as Azure, AWS or GCP, • Experience setting AI strategy, developing adoption roadmaps and supporting organisational change, • Excellent communication and stakeholder management skills, including the ability to explain complex technical concepts to non‑technical audiences, • A commitment to responsible and ethical AI practices Experience with n8n specifically would be particularly relevant given its use within the business. Familiarity with standards such as ISO 27001 and Cyber Essentials Plus would also be beneficial. If you're someone who can lead a technical team, stay close to delivery and help a business build and develop its AI and Automation capability, we'd love to hear from you. At Noux Talent, we believe recruitment should be inclusive by design. We welcome applications from people of all backgrounds and are committed to creating an accessible recruitment process. If you need any reasonable adjustments at any stage of the application or interview process, please let us know #J-18808-Ljbffr

STRABAG seeks a lead for meticulous upfront planning and delivery of connections and commissioning for a clean water infrastructure project in the UK. You will integrate design development with constructability and rigorous commissioning methodologies, coordinating with the Engineering Manager, ECI partners, and the asset owner to ensure outage-ready sequences. Responsibilities include planning, design integration, and managing critical sequencing while ensuring health, safety and quality #J-18808-Ljbffr

Today, Assystem is among the top three independent nuclear engineering firms worldwide. With over 60 years of experience in highly regulated sectors, the group supports public and industrial stakeholders in the execution of complex and strategic infrastructure projects, subject to high safety and security requirements. Assystem mobilizes 8,000 experts in 13 countries and intervenes across the entire project lifecycle, in engineering, project management and digital solutions. Join the Fusion and Modular Nuclear Business Unit! Provide technical expertise across the lifecycle of Electrical Systems for the SMR nuclear power plant. This covers the delivery of the complete design of the Electrical systems, spanning system architecture, sub-system design and equipment specification and design / selection to realise the final verified design of the power station. You will do this by working closely with the engineering teams from across the power station and applying a structured systems engineering approach to design. • Reviews and agrees high level electrical requirements including their testability., • Analyses and translates high level requirements into a validated design for the electrical system/component., • Captures applicable design constraints (must meet conditions) and quality attributes (may be traded) that apply to the system/component., • Captures requirements/constraints in line with the project’s processes for management of interfaces and requirements (e.g., requirements captured in IBM DOORS)., • Designs and implements electrical designs to meet design inputs., • Works with the Verification team to define verification activities., • Analyses electrical designs for functional behaviour, which may include modelling and simulation to demonstrate that the design meets the high-level requirements. Develops and reviews electrical tests that will provide evidence to demonstrate that the electrical requirements have been satisfied., • Participates in and supports capacity planning and the development of long-term strategic goals for the team, in conjunction with managers., • Identifies and mitigates risks., • Develops, implements, documents, and maintains policies, procedures, associated guidelines, tools, and training as required., • Develops the knowledge required to provide advice / support to project teams and / or integrated product teams (IPT)., • Represents the electrical engineering area in meetings, working groups and integrated project teams as assigned., • Works across the power station engineering teams, where required, to deliver standardisation and a commoditised approach to system and component development., • Ensures that quality is maintained throughout the SMR project lifecycle by undertaking appropriate technical reviews and providing the required electrical engineering inputs to the project technical review gates., • Discusses the electrical system design with external organisations including the nuclear safety regulator, potential customers, and suppliers., • Over 55 years in nuclear engineering., • Ranked among the top 3 largest nuclear engineering companies., • Attractive social benefits, including an engaging Employee Committee and holiday bonuses., • Ongoing training with numerous career opportunities., • 70% of our managers are promoted internally!, • Hybrid work: 1-2 days remote per week., • Hold a degree level qualification in electrical engineering or a related subject., • Experienced in working in a highly regulated industry, • Ability to travel Assystem offices and customer sites within UK., • BPSS and SC required Due to the nature of the work, applicants must meet UK security clearance criteria. Ready to make a difference in the nuclear engineering world? Join us and be a part of the future of nuclear and fusion innovation! We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future. #J-18808-Ljbffr

Location: North of England / Hybrid options available Salary / Rate: Competitive (DOE) Type: Permanent We are currently working with a leading infrastructure contractor delivering major power projects across the UK and are looking to speak with experienced Electrical Design Engineers with a background in HV power systems. This role will involve supporting the design and delivery of electrical infrastructure projects across distribution and transmission networks. • Producing electrical designs for HV infrastructure projects (up to 33kV), • Supporting the design of substations, cable systems and associated electrical equipment, • Preparing design drawings, specifications and technical documentation, • Liaising with project delivery teams to ensure designs meet operational and safety requirements, • Supporting design reviews and engineering approvals, • Ensuring designs comply with DNO standards and industry regulations, • Degree or equivalent qualification in Electrical Engineering, • Experience working on HV electrical design projects, • Knowledge of power systems, substations or network infrastructure, • Experience working with DNO standards (SPEN, National Grid, etc. desirable), • Strong understanding of industry regulations and engineering best practice, • Experience designing projects up to 33kV, • Background in power infrastructure, utilities, or energy projects, • Experience working in multi-disciplinary engineering teams This is a great opportunity to join a growing programme of major power infrastructure projects and work within a highly experienced engineering team delivering critical network upgrades. #J-18808-Ljbffr

Circa £42,000-£48,000 depending on experience Bolton Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team • Company bonus: Up to £2,500 (based on company performance and will vary year to year), • Pension: maximum total (employer and employee) contribution of up to 14%, • Overtime: opportunity for paid overtime, • Flexi Leave: Up to 15 additional days, • Flexible working: We welcome applicants who are looking for flexible working arrangements, • Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments, • Facilities: Fantastic site facilities including subsidised meals, free car parking and much more, • Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. You will act as part of the design team as one of the main interfaces to our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of electronics. Working within design support is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of these products to deliver support to our customers. • Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle., • Proven experience in the design of the following disciplines:, • Analogue and Digital Electronics, • Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions., • Someone who will be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs., • Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation., • Experience in a manufacturing environment and supporting and resolving manufacturing issues and a view to implement Design for Manufacture improvements into the design. Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Whatever your background, we welcome your application to MBDA UK and look forward to speaking with you soon. #J-18808-Ljbffr

Senior C++ / C# Software Engineer Bolton £65 - £70 per hour Umbrella 12-Month Contract Full-Time Onsite We are currently recruiting for an experienced C++ / C# Software Engineer to join a highly technical engineering team developing software solutions that support complex engineering products throughout manufacturing, testing and operational delivery. This role will focus on the design, development, integration and verification of software applications in a Windows environment. You will work closely with multidisciplinary engineering teams to deliver robust, high-performance software solutions and support new customer requirements. Key Responsibilities Design and develop software applications using C++ and C# Develop system interfaces for capturing and analysing performance data Support software integration, verification and testing activities Develop robust multi-threaded and concurrent applications Analyse, debug and optimise software performance Work closely with engineering and manufacturing teams Produce and maintain technical documentation Support software deployment and customer requirements Essential Experience Strong commercial experience with C++ development Experience developing software in a Windows environment C# development experience Experience with CI/CD pipelines If you don't tick every box, we'd still like to hear from you. Candidates with strong C++, C#, experience encouraged to apply. Guidant, Carbon60, Lorien & SRG - The Vertage Group Portfolio are acting as an Employment Business in relation to this vacancy. TPBN1_UKTJ

Today, Assystem is among the top three independent nuclear engineering firms worldwide. With over 60 years of experience in highly regulated sectors, the group supports public and industrial stakeholders in the execution of complex and strategic infrastructure projects, subject to high safety and security requirements. Assystem mobilizes 8,000 experts in 13 countries and intervenes across the entire project lifecycle, in engineering, project management and digital solutions. In this role, you will be working with our experienced Simulation and Assessment team to deliver projects such as Finite Element Analysis (FEA) assessments of components for nuclear components to design codes such as ASME III or RCC-M. This includes planning, delivery and reporting of the projects, and communicating with internal and external stakeholders such as the customer’s technical leads. This role may include both working within client teams as part of an integrated embedded team, and delivering Assystem projects from one of our offices. Key Attributes • Eager to Learn – Grow your expertise through hands‑on projects, mentorship, and exposure to diverse customers and challenges., • Technically Curious – Apply engineering analysis using tools such as ANSYS, Abaqus FEA, and MathCAD to deliver robust simulation and assessment work., • Digital-First Mindset – Confident using engineering and collaboration tools including PLM systems, document control platforms, MS Office, and Teams., • Collaborative & Independent – Thrive in team environments while also taking ownership of tasks and delivering independently when needed., • Delivery-Driven – Focused on achieving milestones and producing high‑quality outputs on time and within budget., • Commercially Aware – Understand the wider project context, balancing requirements, risk, change, and delivery objectives., • Organised Communicator – Strong planning, coordination, and communication skills with the ability to manage priorities effectively., • Clear Technical Writer – Produce concise, accurate, and professional technical reports and documentation. Why Join the Community of Switchers? • Over 55 years in nuclear engineering., • Ranked among the top 3 largest nuclear engineering companies., • Attractive social benefits, including an engaging Employee Committee and holiday bonuses., • Ongoing training with numerous career opportunities., • 70% of our managers are promoted internally!, • Hybrid work: 1-2 days remote per week., • Excellent technical fundamentals – aptitude for calculations, appreciation of structures, mechanics and fluids, an ability to ‘sense-check’ analysis results., • Hands‑on experience of computer based modelling codes such as Abaqus, Ansys, Nastran, CFD etc., • Appreciation of code assessments in a safety related industry, for example ASME, RCC-M, KTA or comparable codes from other sectors., • Engineering Degree (or equivalent)., • Full UK driving license and ability to travel within the UK., • Previous experience in similar roles in the nuclear or fusion industry., • Hands‑on experience of 3D modelling in CAD software such as Autodesk Inventor, Catia or SolidWorks., • Experience of fluid‑modelling such as CFD, or dynamic modelling such as LS‑Dyna or Radioss., • Working towards Chartered Engineer status. Attributes: • Excellent communication skills, written and oral, • Strong leadership skills, • Focus on delivering quality output to time and budget, • Act with integrity and instils this in others, • Has an appreciation of wider technical issues beyond own discipline, • Ability to work with a high degree of independence, using their own initiative and self‑motivation, • Confident in a multi‑party, multi‑national environment, • BPSS and SC required, • Ability to travel Assystem offices and customer sites within UK., • To undertake work packages supporting major UK and international Nuclear Clients. Due to the nature of work to be undertaken applicants will be required to meet certain residency criteria in order to attain a minimum level of UK security clearance if not already security cleared to a minimum SC level. We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future. #J-18808-Ljbffr

MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. Salary: Up to £57,000 dependent on experience + bonus + benefits • Company bonus of up to £2,500 (based on company performance and will vary year to year), • Pension of maximum total (employer and employee) contribution of up to 14%, • Paid overtime, • Up to 15 days flexi leave, • 25 days annual leave (plus holiday purchase), • Possible relocation available, • Fantastic site facilities, including subsidised meals, free car parking and more, • Excellent career progression and development opportunities Primarily office based (Bolton) with some opportunity for homeworking Want to be part of a successful team working to develop new and innovative seeker solutions to address complex customer requirements? Then keep reading .... An opportunity exists for a Electronic Engineer with broad based skills, including a strong background in RF engineering, to take a key role in the design support of seeker products being produced in our manufacturing facility based at Bolton. The Seeker Division designs and develops state of the art RF and Dual Mode (RF and IR) seekers for use in guided missile programmes. The role requires a high degree of enthusiasm and a determination to work autonomously to support the delivery of products to the right standard and within the required timescales. • Acting as a design team representative to interface with the design and manufacturing teams to transition a seeker from the development phase into series manufacture., • Work with manufacturing on process and capability issues & support continuous improvement initiatives to maximise production yields., • Support non-conformance management, dealing with design queries and advising on non-conformances where appropriate., • Support manufacturing with internal and external suppliers. to aide the manufacturing team & ensure continuity of supply., • Support obsolescence management by providing recommendations to the design team. We are looking for an Electronic Engineer with the initiative and the determination to investigate and resolve production problems. A broad-based engineering background would be essential to the role and a detailed knowledge of RF assembly and test procedures would be advantageous. The successful applicant will be able to manage their own workload, interact well with both the design and manufacturing teams, work on project changes in a timely manner & maintain the production schedule. The factory based Design Support Team assists with a variety of different seeker projects - no two working days will be the same! The Design Support Team interfaces with both the Stevenage design team & Bolton manufacturing teams, to help with highly technical problem solving. There are also strong relationships with external suppliers who provide sub-assemblies into the seeker build. We respect new perspectives and experiences, and we value our collaborative ways of working. We are committed to growing and supporting diversity in our workforce and ensuring everyone has an equal opportunity to reach their potential. We recognise that everyone is unique, and we encourageyouto speaktousshouldyourequireanyadvice,support oradjustments throughoutour recruitmentprocess.Wealsowelcomeapplicationswhoarelookingforflexibleworking arrangements. Followuson LinkedIn(MBDA),Twitter(@MBDAcareers),Instagram(lifeatMBDA_UK)andGlassdoor orvisitourMBDACareerswebsiteformoreinformation. MBDAUK Limited requiresall employees to achievethe required medicalandnationalsecurityclearancefortheir role.Furtherrestrictionsand/orlimitationsrelatingtonationalityand/orrightstowork mayalso apply.Asaminimumandafterofferstage,allsuccessfulcandidateswillneedtoundergoHMGBasicPersonnelSecurityStandardchecks (BPSS),whicharemanagedbytheMBDAPersonnelSecurityTeam. Due to the nature of our business, this particular vacancy requirestheapplicant asaminimumtobeaBritishCitizenoraDualUKnationalwithBritishcitizenshipandcapableofachievingthe clearancelevelsmentioned above. #J-18808-Ljbffr

Fantastic opportunity to take ownership of manufacturing engineering processes and equipment to make improvements to production whilst developing new skills and techniques Circa £43,500 depending on experience 4-5 days per week on-site due to workload classification SC & British Citizen or Dual National Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. • Company bonus: Up to £2,500 (based on company performance and will vary year to year), • Pension: maximum total (employer and employee) contribution of up to 14%, • Overtime: opportunity for paid overtime, • Flexi Leave: Up to 15 additional days, • Flexible working: We welcome applicants who are looking for flexible working arrangements, • Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments, • Facilities: Fantastic site facilities including subsidised meals, free car parking., • Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. An opportunity has arisen on the development/production manufacturing lines, for a support engineer who would be responsible for translating design requirements into user instructions including the development of the project manufacturing architecture. You will coordinate with the day to day operations staff within the manufacturing facility. The opportunity also allows you to grow your knowledge within manufacturing as part of our development into future opportunities. Industrial Validation, manufacturing architecture and factory of the future principles are some of the work packages that provide stretched objectives for such growth. Working with the Principal Engineer, you will be working on multiple projects, responsible for manufacturing problem identification and resolution: • Support existing manufacturing lines and new product introduction, • Support the industrial validation process through the use of FMEA's, process proving activities etc., • Management of configuration control by the embodiment of design modifications into the manufacturing documentation and industrial validation, • Support the non-conformance process, • Ensure products are produced with consideration to safety, efficiency and economic factors, • Assume the responsibilities for safe operating implementation for changed processes, including liaising with COSHH assessors, SHE and Human Factors, • Liaise with the design authority during the product prototype/development phase, to ensure optimised Design for Manufacture (DfM), • Compilation and update of Manufacturing Instructions maintaining production BOMs, • Tooling development and control, • Electrical or Mechanical Engineering/Manufacturing Apprenticeship (Advanced Level or L3 Standard), • Electrical or Mechanical Engineering/Manufacturing Level 4 academic qualification (HNC, diploma, etc.), • Electrical or Mechanical Engineering/Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved Or • Degree in a relevant subject., • Must demonstrate a proactive approach to problem solving and commitment to work to meet our delivery milestones., • Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions., • Must be able to work within and contribute to a team environment., • Awareness of digital communication platforms to work and communicate effectively within the workplace. MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more… We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDAUK), Instagram (MBDAUK) and Glassdoor or visit our MBDA Careers website for more information. #J-18808-Ljbffr