Trabajos electrical installation en BathCrear alertas

Visum Recruitment has the pleasure of representing our client, a market leader in the wet leisure and water treatment Industry Service Engineer Job Overview Deliver safe, high-quality service, maintenance, fault-finding, installation, and commissioning on swimming pool and spa plant across commercial, leisure, hospitality, and public-sector sites. Provide trusted technical advice, uphold compliance with UK electrical and water-treatment standards, and contribute to project delivery and continuous improvement. Responsibilities Field Service, Maintenance & Repair • Service, maintain, and install water treatment equipment, including chemical dosing, UV, filtration, and swimming pool water treatment plant., • Diagnose and resolve electrical and control system faults on pool plant and associated equipment., • Complete installations, upgrades, and commissioning of electrical pool equipment and control panels., • Work to BS 7671 (18th Edition) and company electrical safety procedures; apply safe isolation and verification before work., • Follow site-specific Risk Assessments & Method Statements (RAMS) for all works., • Apply good practice under PWTAG guidance and ACoP L8/HSG274 where activities interface with water treatment., • Produce accurate service reports, update asset registers, and contribute to continuous improvement within ISO 9001 quality processes. Service Engineer - Qualifications & Skills Essential • Time-served engineer with demonstrable fault-finding skills across water treatment plant (mechanical, electrical, and water treatment)., • HND/HNC in Electrical Engineering or equivalent., • BS 7671 (18th Edition) qualification., • Experience with chemical dosing, UV, filtration, and swimming pool water treatment plant., • Formal pool plant training/course completion (e.g., operator-level)., • Familiarity with PWTAG guidance, ACoP L8/HSG274 Salary & Benefits • Salary £43k, • Company Van, • Quarterly Bonus Scheme

Role: Solar Field Service Engineer Salary: £40,000 + package Location: South West Are you ready to take your career to the next level with one of the world’s leading renewable energy companies? This is a fantastic opportunity to join the Operations & Maintenance (O&M) team of one of the largest and fastest-growing solar energy developers globally. Key Responsibilities: • Carry out both preventative and corrective maintenance on electrical components, including inverters and solar modules., • Deliver electrical maintenance services across a regional portfolio of solar farms., • Coordinate and manage relationships with local subcontractors., • Consistently follow HSE procedures and contribute to ongoing risk assessments. What We’re Looking For: • Electrically competent, with hands-on experience., • Ideally holds a recognised qualification such as City & Guilds 2382-18 (18th Edition)., • Previous experience with industrial PV installation or maintenance is highly desirable., • Full, clean driving licence required., • Strong team player with good communication skills. If this is of interest to you, please reach out to me or apply to the role.

Electrical Contracts Manager South-West Region | £60,000+ DOE + Bonus | Growing Fire, Security & Electrical Compliance Group Company Overview Join a rapidly expanding compliance services group delivering electrical, fire and security services across multi‑site commercial portfolios. With strong investment and ambitious growth plans, the business offers excellent opportunities for progression and professional development. Role Summary We’re looking for an experienced Electrical Contracts Manager to take ownership of a major multi‑site electrical compliance contract across 130+ locations and over 1,250 yearly callouts. You’ll lead the day‑to‑day delivery of EICRs, PAT, thermal imaging and reactive works across the South-West region. Key Responsibilities • Manage the end‑to‑end delivery of a large electrical compliance contract across multiple sites., • Act as the primary client contact, handling escalations, service reviews and performance meetings., • Oversee planning and delivery of EICRs, PAT testing, thermal imaging and reactive works., • Ensure SLA performance, quality standards and compliance with BS 7671 and HSE regulations., • Review certification, reports and remedial recommendations for accuracy and compliance., • Control contract P&L, labour utilisation, subcontractor spend and cost‑to‑serve., • Lead and support engineers, subcontractors and service coordinators., • Drive continuous improvement, process efficiency and scalable delivery across the contract Key Requirements Essential • Experience as an Electrical Contracts Manager or in a similar compliance-led role., • Strong understanding of EICRs, PAT, remedials and reactive works., • Background managing high‑volume, multi‑site service contracts., • Confident in client management, prioritisation and operational decision‑making., • Good commercial awareness and cost control skills., • Full UK driving licence., • Qualifications: NVQ Level 3 Electrical Installation, 18th Edition, Inspection & Testing (e.g., C&G 2391). Benefits & Package • £60,000+ basic depending on experience., • Performance‑related bonus., • Pension and standard benefits., • Ongoing industry training and qualifications., • Clear progression as the business scales. Location & Work Pattern • Office based role in Bath., • South-West region travel to sites., • Field‑based with regular site and customer visits.

What you will be working on: Servicing and Maintaining Security Systems • Perform regular servicing, maintenance, and fault diagnosis on CCTV, intruder alarms, and access control systems., • Repair or replace faulty components to restore functionality., • Ensure all systems meet relevant standards and regulations., • Provide emergency fault response as part of an on-call rota., • Ensuring a Safe Working Environment, • Follow safety protocols, especially when working alone., • Identify and mitigate potential hazards, using PPE and adhering to safety guidelines., • Consistently follow RAMS to ensure safe, efficient task execution., • Read and interpret electrical and building plans., • Use hand tools, power tools, and specialist equipment for installation and maintenance., • Apply electrical knowledge to troubleshoot and install systems effectively., • Hold or be able to obtain ECS/CSCS certification., • Respond to out-of-hours service calls and emergencies as required., • Work flexibly, including evenings, weekends, and overnight stays., • Be physically capable of safe onsite work in various environments., • Willing to travel to customer sites and stay overnight to carry out servicing and repairs.

My client is a well established electrical firm based in Loughborough, Leicestershire They are now seeking an experienced electrician based inBristol to join their team on a permanent basis Recommended that you have the following qualifications; • City and guilds 2391 or 2394 (Initial Verification) and 2395 (Periodic Inspection, Testing and Certification), • City and guilds 2382-12 (Requirements of Electrical Installation BS7671: June 2008) You will also have good people and communication skills are essential. A full UK driving licence is also essential In exchange for the above, you will be rewarded with the following • Competitive salary, £29- £38k, DOE, • Van + Fuel Card, • Mobile phone, • Laptop, • All uniform and PPE Provided, • Large tools, • Training and development opportunities, • 20 days holiday + statutory JBRP1_UKTJ

Earn great money working as a Controls, Electronic or Electrical Service Engineer to install, commission, fault find and repair instrumentation, PLC control and automation systems for the marine industry. Field based, but commutable to customers around the South West. We offer an excellent basic salary, lots of overtime and great earning potential for an Engineer who is happy to stay away across the UK on one to two week projects at a time. SALARY: Up to £60,000 BENEFITS: · Overtime on all work over 37 hours (with premium for weekend / bank holidays) · Company vehicle · Annual bonus · Holiday allowance which increases with overtime · Private healthcare · Pension. LOCATION: Cornwall / Devon COMMUTABLE LOCATIONS: Penzance, Newquay, Falmouth, Bude, Truro, Bodmin, Plymouth, Exeter, Taunton, Torquay, Weymouth, Crediton, Yeovil, Weymouth, Minehead, Bristol WHY SHOULD I APPLY? · We're a profitable and developing company. Now is a great time to join us! · Our generous overtime means you can earn an excellent salary. · Planned work! You'll know where you'll be, when, and for how long. Take control of your life and schedule. · Be part of a team of experts and become an expert yourself in a niche field. JOB SPECIFICATION: Electrical Engineer, Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine Industry This is a field based Electronic / Electrical Service Engineer vacancy for a very well established and respected specialist in instrumentation, PLC control and automation systems to the marine industry. This role will be split between (80%) scheduled electrical / electronic installation, commissioning and refit projects - typically staying away for 10-14 days at sites across the UK - but with a heavy focus on customers around Falmouth / Devonport. The remainder (20%) will be reactionary fault finding and repair (1-2 day trips) on first and third party instrumentation, PLC controls and automation equipment or machinery. The majority of work will be in the UK, though you will work on international projects - perhaps 6 weeks per year and including trips to Gibraltar, UAE, Bahrain and USA. REQUIREMENTS: Electrical Engineer, Electronic Service Engineer : Instrumentation, PLC Control and Automation Systems - Marine Industry We require a practical, hands on Engineer with a track record as an electronic or electrical Service / Maintenance Engineer in an industrial setting. A good, practical grasp of electronic engineering is required. Any experience / familiarity with temperature, pressure & level measurement would be an advantage. As would, to a lesser extent, Allen Bradley and Siemens PLC Programming and Maintenance experience. You must be flexible and prepared to travel and stay away as required. THE COMPANY: We are a well established and recognised company - specialising in a niche field of Instrumentation, PLC Control and Automation Systems to the Marine Industry - with an excellent reputation. This role has come about as a result of our continued growth and development. PROSPECTS: Excellent earning potential in this role. We also have a track record of promoting from within where possible. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Controls Engineer, Service Engineer, Maintenance Engineer, Electronic Engineer, Electrical Engineer, Process Engineer, Installation Engineer, Commissioning Engineer, Applications Engineer - Electrical, Electronic, Instrumentation, PLC Control Systems, Automation Systems, Marine Industry, Industrial Engineering, Automation, Siemens, Allen Bradley, Temperature, Pressure, Level Measurement Please Note - We have been selected as the exclusive retained partner for this role so any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP18413, Wallace Hind Selection JBRP1_UKTJ

RSD Recruitment are working with a well-established electrical services company to recruit an experienced Door Entry / Access Control Engineer to cover Bristol and surrounding areas. Is this the role you are looking for If so read on for more details, and make sure to apply today. This is a permanent role within a busy commercial team, working across commercial buildings, social housing, and town centre properties. You will be responsible for the installation, servicing, maintenance, and fault-finding of door entry and access control systems. The role includes both new installations and reactive maintenance work. You will also carry out system upgrades and commissioning, complete job documentation, and ensure all work is carried out in line with health and safety regulations. Key Responsibilities • Install, service, and maintain door entry and access control systems, • Diagnose faults and carry out repairs, • Complete upgrades and commissioning to current standards, • Attend reactive call-outs and planned works, • Provide a professional service to clients and residents, • Complete accurate job reports, • Minimum 5 years experience with intercom / door entry systems (ENTROTEC preferred), • Minimum 5 years experience with access control systems (INTRATONE, PAC, ENSIGN preferred), • Strong fault-finding skills, • Full UK driving licence, • Background working in social housing, • £38,000 £42,000 per annum (depending on experience), • 23 days annual leave + 8 bank holidays, • Additional leave for length of service (up to 25 days), • All parking costs covered, • Company van and fuel card (if applicable), • Peoples Pension (5% employee contribution), • HAPI Rewards App (retail discounts), • 24/7 Virtual GP access, • Employee Assistance Programme

Job Specification: MEICA Project Manager - Havant Thicket Role Purpose Lead the delivery of MEICA works on the Havant Thicket water project, overseeing design coordination, installation, commissioning, safety, programme and cost performance. Key Responsibilities Manage MEICA scope across pumping, treatment and control systems Coordinate design reviews, technical queries and subcontractor activities Oversee installation, FAT/SAT, testing and commissioning Drive safety standards, RAMS, permits and environmental compliance Monitor programme, budgets, change management and NEC processes Liaise with client, operations and multi‑disciplinary teamsExperience Required MEICA delivery in water sector (pumping stations, treatment assets, ICA/SCADA) Managing subcontractors, commissioning, and interface works NEC experience and strong commercial awarenessQualifications Mechanical/Electrical/Controls background (HNC/HND/Degree) CSCS Manager card, SMSTS, EUSR Water Hygiene (desirable)...

Job Title: I & C Design Engineer Pay: Between £75,000 - £85,000 per annum Location: Hinkley Point C, Somerset Job ID: 1795 About The Role: Right across infrastructure, there's a requirement to not only maintain, but also renew and reimagine. Whatever stage you're at in your career, with us you'll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive. Want to be a part of it? What will you be doing? The Instrumentation & Control (I&C) Designer/Engineer plays a key role in helping deliver safe, reliable systems within the turbine halls at Hinkley Point C. Working closely with a wide range of engineering and construction teams, you'll help shape detailed design packages, support installation, and keep the project aligned with UK nuclear safety standards. Your work will guide the project from early design through commissioning and final handover. You'll develop and review I&C documents such as hook-up drawings, carry out technical assessments, and make sure every design meets regulatory and project requirements. You'll prepare material take-offs, equipment schedules, and procurement details, while keeping documentation accurate and up to date. Day-to-day, you'll collaborate with mechanical, electrical, civil, and control specialists, respond to technical queries, and support construction teams on site. You'll also work with suppliers and the client to ensure smooth integration and successful delivery of all I&C systems. What you'll bring: • Strong background in I&C design within nuclear, power, or other regulated industries, • Knowledge of safety-related and field instrumentation, • Comfortable using tools such as AutoCAD, E3D/PDMS, or Aveva E&I, • Degree or HNC/HND in a relevant engineering discipline, • Professional membership (IET, InstMC) is a bonus, • Experience on nuclear-licensed sites is highly valued, • Excellent problem-solving, communication, and teamwork skills, • High attention to detail and commitment to nuclear safety We offer a range of benefits designed to support your life in and out of work, some of which include; • Company Pension Scheme, • Death in Service Benefit, • Opportunity to purchase additional holidays per year (up to 5 days for full time employees), • My Rewards - offering discounts on high street and online shopping, • Employee assistance programme, • Private health care for you, • 25 days annual leave plus bank holidays, • Recommend a friend - get rewarded for introducing people to us! We want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. We're one of the Top 100 UK companies actively supporting and recruiting army veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs. Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. • We're responsible and go further for our people, clients, communities and the planet, • We're open and seek new and better ways of exceeding expectations, • We're together and as one team; the whole is greater than the sum of the parts JBRP1_UKTJ

Electrical Fixed Wire Tester Bristol £45,000 - £49,500 We are recruiting for a Fixed Wire Tester / Fixed Wire Test Electrician to join a specialist electrical team working across a portfolio of commercial sites in the Bristol area. This is a great opportunity for an experienced 2391-qualified electrician looking for a role with strong earning potential, consistent overtime opportunities and the chance to work across a variety of commercial environments. The Role Working across multiple commercial sites, you will be responsible for carrying out Electrical Installation Condition Reports (EICRs) and Fixed Wire Testing, identifying remedial works and ensuring systems remain compliant with current regulations. Key Duties • Carry out Fixed Wire Testing and EICRs across commercial properties, • Identify faults and produce remedial work reports, • Ensure all work complies with BS7671 - 18th Edition Wiring Regulations, • Complete certification and documentation accurately and within required timeframes, • Represent the business professionally on client sites, • Communicate effectively with clients and internal teams, • Maintain vehicle and work records in line with company procedures, • City & Guilds 2391 - Test & Inspection (essential), • 18th Edition Wiring Regulations, • NVQ Level 3 Electrical Installations (or equivalent), • Experience carrying out Fixed Wire Testing within commercial environments, • Full UK driving licence, • £45,000 - £49,500, • Company van & Fuel Card, • Overtime available regularly, • Monday - Friday 12pm - 21:00 working pattern, • 25 Days annual leave + Bank Holidays, • Travel Time paid, • Opportunity to work across a variety of commercial sites JBRP1_UKTJ

A variety of soft skills and experience may be required for the following role Please ensure you check the overview below carefully. Domestic Electric Vehicle Charging Point Installer/Domestic EV Installer/Electrician Exciting opportunity for you to broaden your skills and contribute to the green revolution. This is the perfect time to make the move into this forward thinking and fast-growing sector of the Electrical industry. We are working with the industry leader, with a vision to change the way people drive. They have made it their mission to install a charging point everywhere you park. To make that vision a reality we need the best talent in the industry - a vision Search Energy are proud to support. You will be responsible for installing and maintaining the network of EV Charging Points, in a localised area, while representing the company in a professional manner. Customer engagement and service are as important in this role as the technical skills to complete the installations. A keen attention and focus on Health and Safety is also paramount for our installers. What's in it for you? • Competitive basic salary of £37,300, • Annual £2000 bonus, • Overtime available, • Company hire van and fuel card, • 21 days annual leave plus 8 Bank Holiday days, • Workplace pension, • Be fully competent with completing electrical certificates using digital software, • An understanding of the current regulations and a focus to always remain compliant, • Able to follow safe working procedures., • Level 3 electrical installations qualification, • Installation and termination of SWA cable, • BS 7671 :2018, 18th edition, • Minimum of 2 years Electrical Experience in domestic environment, • City and Guilds EV installation 2919 or equivalent. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age.

Multi Skilled Engineer For a complete understanding of this opportunity, and what will be required to be a successful applicant, read on. £55,000 Basic Salary + Company Benefits + Overtime Enhanced Overtime Rates Our client, a leader in the manufacturing industry, is seeking skilled Multi Skilled Engineers to join their established technical and engineering team. This is an exciting opportunity to join a forward-thinking, investment-driven company with modern production facilities and a strong focus on continuous improvement, reliability, and operational excellence. The successful Multi Skilled Engineer will play a key role in ensuring maximum plant uptime, driving performance improvements, and maintaining high engineering standards across the site. The main responsibilities of the Multi Skilled Engineer will include: • Mechanical and electrical maintenance across all production operations, • Planned preventative maintenance (PPM) and reactive breakdown support, • Ensuring machinery is maintained and fully functional automated machinery, robotics, conveyor systems mechanical, electrical, hydraulics, pneumatics, • Fault finding and diagnostics on PLC-controlled equipment and automated systems, • Supporting continuous improvement initiatives to enhance quality, reduce downtime, and improve cost efficiency, • Assisting production teams with machinery issues, changeovers, and machine set-ups, • Supporting xrnqpay installation and commissioning of new equipment and upgrades, • Working to health & safety standards and site compliance procedures, • Providing guidance and relevant training to production staff where appropriate

Are you an experienced Field Service Technician with a background in combined heat and power? Please ensure you read the below overview and requirements for this employment opportunity completely. If so, we have an exciting opportunity providing support for customers throughout the UK. • Salary: up to £50,000, • Company vehicle, • 25 days holiday plus bank holidays We have over 17 years experience providing Combined Heat & Power and packaged plant room equipment solutions. We encompass full design and installation in addition to maintenance and ongoing service requirements. We are seeking an experienced, highly skilled Field Service Technician to join our dynamic team to ensure the effective running and performance of our 250+ CHP units throughout the UK. The ideal applicant will possess strong communication skills and a proactive approach to service delivery. Responsibilities • Planned and reactive maintenance of CHPs., • Mechanical and electrical fault find and repair., • Service of Powerbox, Indop, and Energimizer gas fuelled CHPs., • Work with motors, generators, pumps, hydraulics., • Utilise strong fault-finding skills to identify issues and offer resolutions., • Provide a high level of customer service from start to finish., • Collaborate with the office team to escalate complex issues., • Carry out duties to a high standard whilst complying with all relevant health and safety requirements., • Proven experience as a Field Service Technician working with commercial gas internal combustion engines., • Experience servicing and carrying out whole life maintenance programs., • Excellent problem-solving skills with the ability to diagnose issues efficiently., • Valid Gas Safe qualifications COCN1., • Valid driving licence., • Willing to travel extensively and stay away from home during the week. Apply today to be considered for the role. Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. xrnqpay Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.

Role: Commissioning Manager Location: Hinkley Point C Salary: £75,000 - £85,000 + Car Allowance Summary We are seeking an experienced Commissioning Manager to lead the planning, control, and execution of commissioning for electrical, control, and automation systems at Hinkley Point C. This is a site-based role in Somerset for a professional with nuclear or other highly regulated, safety-critical experience. Key Responsibilities • Oversee FAT and SAT, installation, testing, and commissioning works, • Lead, mentor, and supervise commissioning engineers and site teams, • Develop, review, approve, and control commissioning strategies, test plans, and documentation, • Control drawings, mark-ups, and configuration changes, • Ensure correct deployment of SCADA, PLCs, RTUs, IEDs, BCUs, and networks, • Manage isolations, LOTO, permits, and safety-critical processes, • Lead fault investigation, non-conformance resolution, and root cause analysis, • Promote and demonstrate a strong nuclear safety culture Candidate Profile • Degree qualified or equivalent in Electrical Engineering, Control & Instrumentation, or similar, • Proven commissioning experience in nuclear or safety-critical regulated environments, • Experience leading teams and site-based technical activities, • Knowledge of ONR requirements, commissioning lifecycle, hold-point control, and nuclear safety principles, • Strong fault-finding skills on complex electrical/control systems, • Experience with industrial networks, SCADA, and configuration verification, • BS7671 18th Edition and C&G 2391 (desirable), • Excellent leadership, communication, and stakeholder skills, • Full UK driving licence and willingness to work site-based What's on Offer • Work on a nationally critical nuclear project, • Long-term role in the UK nuclear sector, • Exposure to complex systems and regulated commissioning activities, • Competitive salary and benefits, • Support for IEng / CEng chartership For more information please contact Mitchell Rogers on 07718 185869 --- Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website. JBRP1_UKTJ

Location: Site based - Somerset (Mon-Fri) Status: Contract INSIDE IR 35 Duration: Approval until 31dec26 (renewable) Reports to : Construction Superintendent Morson Edge are working with a major player in the Energy sector who have a current requirement for a Field Engineer (Electrical) on a contract basis. All work is associated with a major infrastructure project currently under construction near Bridgwater, Somerset. Job Purpose / Overview • The Field Engineer - Electrical will take responsibility for activities in the field relating to Construction Surveillance., • The Field Engineer is responsible for the surveillance of quality compliance within the designated section of the Works in accordance with surveillance strategy requirements., • The Field Engineer will input into site wide management issues and will have a high level of interaction and coordination with other operational members of the site-wide team., • Check that Works are constructed in accordance with the contract and escalate any non-conformance request requirements, • Proactively communicate with other site teams, maintain good communication links and ensure surveillance is timely reported, • Contribute surveillance information to support KPI indicators, • Endeavour to identify potential Quality issues before they arrive to enable mitigating actions, • Support team instructions to take temporary measures to mitigate and keep works safe and within, • Quality standards. Follow up by taking appropriate and proportionate action (e.g. issue communications, call meetings) to prevent the halt of works, • Enhance the team with a good perspective of current and future site activities, • Develop and maintain an understanding of construction drawings, construction activities, Quality Control Plans and Quality Inspection Records, • Ensure and monitor that Quality Inspection Records are taken and agreed before Works are covered up, • Typically, holds a minimum of HND in a Civil/ Mechanical/ Electrical Engineering qualification or equivalent vocational training and experience, • 18th Edition Wiring Regs (BS7671) & Inspection & Test (C&G 2391), CSCS or SMSTS, • Proven track record of working within a large construction team, • Broad knowledge and wide understanding of the building industry, materials, trades methods and legal requirements, • Excellent organisation, delegation and communication skills. Ability to work within a high performing team that continuously outperforms expectations and objectives, • Proven experience of writing diaries which are accurate, concise and with relevance to the particular form of contract, • Good attention to detail when checking work and materials, • Able to establish appropriate working relationships with the contractors Desirable • Experience in the installation and erection of Electrical plant., • General understanding of the posts obligations under CDM Regulations - along with an understanding of the document and drawing approvals processes, • Experience in the use of electronic hand held devices to capture information As this position specialises in Electrical Installations through the construction phase, the following also applies: Desirable Qualifications: • EUSR National Grid Access Persons JBRP1_UKTJ

Job Specification We are looking for an experienced Electrical Installation Design Engineer to join our Wing Engineering design team in Filton-Bristol. We are in the middle of a very significant transformation which brings together the lifecycle of Airbus's entire production system and supply chain in one seamless digital world. All while supporting the current Design needs and systems typical of a legacy product. As a result, we are looking for an experienced Electrical Systems Installation design engineer to come and support our current team. The main tasks and responsibilities will include • Create Electrical Design Solutions and 2D drawings in line with applicable design processes and rules for the relevant programs, • Analyse and validate design requirements and agreement of deviations with stakeholders if and when needed., • Understand Functional inputs and validate Functional Electrics to Electrics Installation configuration., • Support Customer Services through Tech Requests. We are looking for candidates with the following skills and competences: • You are proficient in Electrical Installation Design, • You have the ability to listen, understand and communicate information. Achieving delivery to Time, Cost and Quality. Finding creative solutions to complex problems. • You foster innovation and free thinking. You have a creative and strategic mind set., • You can present simply and clearly technical cases in a complex network of stakeholders and customers enabling right first time delivery, achieving all the planned and agreed milestones. PASS VPM,ACP Candidates that have experience in other PLM/CAD systems will be considered • ESI Approval Signatory is desirable but not mandatory. Candidates that have held Approval Delegations in the past will also be considered, • Experience on aeronautics and aeronautical products is considered desirable but not mandatory. Candidates that hold experience in other industries and disciplines will be considered. JBRP1_UKTJ

Position: Electrical Project Engineer Location: Bristol Salary: £60,000 - £70,000 DOE My client is a leading Engineering Service Provider managing high-profile contracts within the FMCG sector across the UK. They are seeking a Electrical Project Engineer to take ownership of complex, multi-site projects. This is a high-impact role for a technically exceptional individual with strong commercial acumen, leadership skills, and proven expertise in delivering electrical projects to the highest standards. The successful candidate will combine advanced technical knowledge with strategic oversight, guiding projects from inception to completion, managing teams and subcontractors, and maintaining exceptional client relationships. Electrical Project Engineer Job Overview • Lead the full lifecycle of commercial electrical projects, ensuring delivery on time, within budget, and to the highest quality standards., • Prepare comprehensive project quotes, balancing materials, labour, and resource requirements while identifying opportunities for efficiency and cost optimisation., • Design, configure, and optimise control system architecture, including PLC, HMI, and SCADA software (Siemens or Allen Bradley)., • Oversee the installation, commissioning, and troubleshooting of control panels and electrical systems., • Mentor and supervise engineering teams and subcontractors, fostering high-performance and accountability on site., • Drive continuous improvement initiatives and ensure all projects comply with relevant health and safety standards., • Degree, HND, or HNC in Electrical Engineering (or equivalent), • Extensive experience in control panel design, electrical installation, and commissioning, • Strong commercial project management experience, • Proven experience with PLC software development (Siemens or Allen Bradley), • Experience with FMCG / Pharmaceutical production environments, • IOSH / NEBOSH qualified would be beneficial, • Excellent leadership, communication, and stakeholder management skills, • £60,000 - £70,000 depending on experience, • Mileage paid, • 28 Days holiday inclusive of Bank holidays, • Mon - Fri: 08:00 - 17:00 Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. JBRP1_UKTJ

Field Service Engineer Recycling Machinery • Location:Field Based (UK Wide Travel), • Working Hours:Monday Friday with regular overnight stay (occasional weekends), • Salary:From £41,000 - £60,000 per annum, • Overtime x hourly rate (weekdays & Saturday) & 2x hourly rate (Sundays), • Company van and tools, • Company credit / fuel card, • Job security in a growing industry, • Mobile phone and iPad, • Company Pension About the role As a Field Service Engineer, you will be responsible for maintaining and installing a wide range of machinery used in the recycling and waste-handling industry. This includes balers, compactors, shredders, separators, and conveyors. You will provide on-site support, diagnose faults, carry out refurbishments and ensure equipment is operating safely and efficiently. Key Responsibilities • Service, maintain, repair, and install recycling and waste-processing machinery including balers, conveyors, compactors, and separators., • Diagnose and resolve mechanical, electrical, and hydraulic faults (motors, gearboxes, control panels, and conveyors), • Undertake machine builds and refurbishments both in the workshop and on customer sites., • Provide nationwide field support, including planned maintenance, breakdown callouts and new machinery installations., • Deliver on-site customer training and maintain strong, professional customer relationships., • Complete accurate service reports, installation records, and job documentation, • Work flexibly to support changing schedules, including regular travel and occasional overnight stays., • Previous experience as a Field Service Engineer, Maintenance Engineer, or similar hands-on experience engineering role., • Strong mechanical and electrical fault-finding skills, • Experience working with recycling, agricultural, industrial or plant machinery is beneficial but not essential., • Mechanical or Electrical qualifications (NVQ, Apprenticeship, or similar), • Able to work independently or as part of a small team., • Excellent problem solving and customer service skills., • Comfortable travelling around the UK with overnight stays JBRP1_UKTJ

Testing & Inspection Electrician £42k + Car Allowance & Private Healthcare. Are you currently an Electrician looking for the next opportunity to grant you a step up? The scenario may be that you are currently working endless contract work, chasing outstanding payments, or wanting to make the step up into a self-sufficient electrical role. If so, then we have the role for you The following role will act as an impartial inspector generating wiring readings, carrying out test inspections, producing regulated inspection reports, all to industry standards. Planning will be completed to fulfill inspections, whilst managing client relations & supported change if necessary. The client we are working with offer the stability & scope of working for a large firm, but with the freedom of working independently. They work with a diverse range of clients across I&C sectors, with this role situated inBristoloffering a world-class training & progression programme to enable you to continue career growth. Qualifications: • City & Guilds Part 1, 2 & 3 OR NVQ Level 3 OR City and Guilds 2365 Diploma in Electrical Installation., • £42k starting base., • £2k joining bonus., • £4250 company car allowance or company car., • Private healthcare. Please enquire for more information & apply to submit your interest. JBRP1_UKTJ

Electrical Maintenance Engineer FM Service Provider - High-spec Commercial Office Bristol up to £45,000 + Package - AP Training Read the overview of this opportunity to understand what skills, including and relevant soft skills and software package proficiencies, are required. An exciting opportunity to join an established FM service provider based in Bristol has arisen! CBW Staffing Solutions are currently recruiting an Electrical Maintenance Engineer based in a commercial office building in the heart of Bristol. He or she will be required to carry out planned and reactive maintenance across this static site. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in building maintenance. In return, the company is offering a competitive salary of up to £45,000, overtime, further training and a potential route into further career progression. In return, my client is offering a very competitive package including: • A basic salary of up to £45,000, • AP Training - £500 per annum per AP, • Plenty of overtime, • 25 days holiday + Bank Holidays, • Company Pension Scheme, • Excellent career progression opportunitiesHours of work, • Monday- Friday 08:00-17:00Key duties & Responsibilities, • Lighting (Small installation, Fault-finding, Lamping, etc), • Emergency lighting tests, • Control Panels, • Changing Ballast, • BMS System - Monitor (i.e. Hot & cold), • Carry out all aspects of M&E/Fabric maintenance, • Maintain and update Log books, • Plumbing - Unblocking toilets, • Pumps, motors, • Compliance and logbooks, • Chillers and pressurisation units, • Undertake all allocated tasks and perform them in a timely and professional manner., • Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them., • Be proactive to ensure all H&S issues are reported/escalated as required., • Maintain informal communications with Client staff members related to service levels and issues., • Report service affecting issued to the site management team for formal communication with the client., • Remain flexible with regard to site attendance and tasks undertaken within personal competency. xrnqpay, • Be fully aware of relevant Health and Safety and general legislative matters., • Escort specialist subcontractorsRequirements, • Electrically qualified - City & Guilds Level 2&3, • City & Guilds - 17th/18th Edition, • Must be able to provide copies of your trade certificates, • A proven track record in commercial building maintenance, • Multi-skilled, • Good communication skills, • Client Facing Please send your CV to Archie Reed of CBW Staffing Solutions to avoid missing out on the role !

Installation Engineer (Medical Equipment) You can get further details about the nature of this opening, and what is expected from applicants, by reading the below. £32,000 - £35,000 (OTE £42K++) + Quarterly Bonus + Pension + Healthcare + Training + Progression + + Company Van + Company Benefits + 23 Days Holiday Weston-super-Mare / Bristol Are you an Installation Engineer or similar with experience installing any sort of technical equipment? Are you looking to work for a company offering door-to-door pay, plenty of training and the opportunity to progress into a senior role? On offer is the opportunity to join a company that specialises in installing, servicing and maintaining healthcare equipment in hospitals, schools and care homes. Since they were established in 1985, they have seen significant organic growth and are looking to increase the size of their engineering team. In this role, you will be working as part of a team and independently, covering the West and South of the UK, visiting customer sites, and carrying out the installation of ceiling track hoists. This role would suit a Field Service Engineer looking to make the step into the medical industry with further training, the opportunity to progress and excellent overtime rates, the role will require regular overnight stays. The Role: • Installation of ceiling track hoists, • Ensure that high standards in the work area are maintained, • Ensure relevant documentation is completed and authorised, • Working as part of a team and independently, • Further training from Senior Engineers, • Monday to Friday,, • Clean Driving licence, • Mechanical installation experience in similar environments, • Experience of using all types of hand power tools

Job Title: Field Engineer (EC&I) Below, you will find a complete breakdown of everything required of potential candidates, as well as how to apply Good luck. Pay: £327.95 PAYE or Umbrella £458.80 Per Day Location: HPC site, 5 days on site, potential for weekend work Job ID: 1800 Job Purpose / Overview The Surveillance Field Engineer - Electrical will take responsibility for activities in the field relating to Construction Surveillance. They will form part of a team with the primary role to deliver the NEC Supervisor duties described in the NEC contract and ensure that HPC Quality needs, targets and expectations are realised. Principal Accountabilities The Field Engineer is responsible for the surveillance of quality compliance within the designated section of the Works in accordance with surveillance strategy requirements. The Field Engineer will report to the Construction Superintendent for day to day guidance. The Field Engineer will input into site wide management issues and a high level of interaction and coordination with other operational members of the site wide team will be required. In addition to reporting and liaising responsibilities, the Field Engineer will be required to adhere to (and suggest enhancements and improvements to) company policies, procedures and protocols for construction, health & safety and other functions. The Field Engineer will be required to; • Check the Works are constructed in accordance with the contract and notify the Construction Superintendent of non-conformance request requirements, • Submit details of any non-conformance request requirements to assist in the issuing of nonconformance reports, • Proactively communicate with other site teams, maintain good communication links and ensure surveillance is timely reported, • Contribute surveillance information to support KPI indicators, • Endeavour to identify potential Quality issues before they arrive to enable mitigating actions, • Enhance the team with a good perspective of current and future site activities, • Ensure tasks are developed to quality in accordance with the company's requirement for health, safety and environment, • Develop and maintain an understanding of construction drawings, construction activities, Quality Control Plans and Quality Inspection Records, • Ensure and monitor that Quality Inspection Records are taken and agreed before Works are covered up Essential • Required Qualifications: 18th Edition Wiring Regs (BS7671) & Inspection & Test (C&G 2391), CSCS or SMSTS, • Broad knowledge and wide understanding of the building industry, materials, trades methods and legal requirements, • Excellent organisation, delegation and communication skills. Ability to work within a high performing team that continuously outperforms expectations and objectives, • Proven experience of writing diaries which are accurate, concise and with relevance to the particular form of contract, • Proven track record of working within a large construction team, • A minimum of HND in a Civil/ Mechanical/ Electrical Engineering qualification or equivalent vocational training and experience, • Good attention to detail when checking work and materials, • Able to establish appropriate working relationships with the contractors, • Experience in the installation and erection of Electrical plant. xrnqpay, • General understanding of the posts obligations under CDM Regulations - along with an understanding of the document and drawing approvals processes, • Strong communication skills in English is required, and knowledge of French can be an advantage, • Experience in the use of electronic hand held devices to capture information, • As this position specialises in Electrical Installations through the construction phase, the following also applies:, • Desirable Qualifications: EUSR National Grid Access Persons, • Desirable Awareness: Experience with LV / MV electrical distribution, • systems. NEC and FIDIC Contracts

Field Service Engineer - Specialist Machine Builder Is your CV ready If so, and you are confident this is the role for you, make sure to apply asap. Are you an experienced Electrical Engineer looking for a new challenge with a leading specialist machine builder? We are recruiting on behalf of our client, a renowned manufacturer supplying bespoke automated manufacturing equipment to customers worldwide.Ideally you will be based in Somerset. The Role: As a Field Service Engineer, you'll play a key role in the build, test, commissioning, installation, troubleshooting, and servicing of advanced machinery at client sites across the globe. You will also provide hands-on training to customers, ensuring they get the best from their equipment. The role involves working with a range of associated systems, including PLCs, motors, drives, and HMIs and so an understanding of machine controls from a manufacturing environment where production is automated or from working for a specialist machine builder is useful. Key Responsibilities: • Commissioning and installing specialist machinery at customer locations (UK & worldwide), • Diagnosing and resolving technical issues, both remotely and on-site, • Providing customer training and support on equipment operation and maintenance, • Fully time-served Electrical Engineer (apprenticeship or equivalent), • HNC or equivalent in Electrical Engineering preferred, • Strong communication skills, both written and verbal, • Able to work independently and confidently in customer-facing environments, • Willing and able to travel internationally, sometimes at short notice (up to 50% of the time), • Holds a valid passport and driving licence., • Experience with PLCs advantageous, • Demonstrated problem-solving and debugging skills, • Work with a market-leading manufacturer at the forefront of their industry, • International travel and varied, challenging projects Apply now or contact us for more information.

? Electrical Maintenance Engineer – Day Shift ? Location: Near Taunton, Somerset Salary: Up to £35,000 per annum Working Hours: Monday – Thursday: 7:30am – 4:30pm Friday: 7:30am – 12:30pm Our client, a well-established manufacturer in the Taunton area, is currently seeking an Electrical Maintenance Engineer to join their operations team. This is an excellent opportunity to work within a stable and innovative manufacturing environment on a permanent day shift. The Opportunity As part of the operations team, you will play a key role in maintaining the performance and reliability of production equipment. Your work will help ensure manufacturing processes run efficiently while maintaining the company's high technical and quality standards. Key Responsibilities • Carry out planned preventative maintenance (PPM) and reactive repairs on electrical systems, production machinery and site equipment., • Diagnose and resolve electrical faults across manufacturing and testing equipment., • Assist with the installation, commissioning and optimisation of new machinery within the manufacturing facility., • Work closely with engineering, laboratory and production teams to minimise downtime and improve process reliability., • Ensure all work complies with electrical legislation, safety regulations and internal quality standards., • Maintain accurate maintenance records and support ongoing equipment reliability improvements. ? Skills & Experience • Qualified Electrical Engineer, • Experience working with industrial electrical systems such as motors, control panels, sensors and automated equipment, • Ability to read and interpret electrical drawings and schematics, • Strong problem-solving skills with a proactive, hands-on approach, • Good knowledge of electrical safety standards and compliance regulations Benefits • Competitive salary up to £35,000, • Overtime opportunities available, • Enhanced employer pension contributions, • 23 days holiday + bank holidays, • Life assurance (4x salary) Interested in finding out more? For more information, please call Adam on 01823 212043 or email Allocation Number: INDTB JBRP1_UKTJ

Field Service Engineer For a complete understanding of this opportunity, and what will be required to be a successful applicant, read on. UK-Based | Nationwide Travel £35,000 -50,000 (Overtime Available) We're currently recruiting on behalf of a well-established and growing engineering business operating within the recycling and waste processing sector. Due to continued expansion, they are looking to appoint an experienced Field Service Engineer to support their nationwide customer base. This is a fantastic opportunity for a hands-on engineer who enjoys autonomy, variety, and working on-site with customers. The Role As a Field Service Engineer, you will be responsible for the installation, servicing, maintenance, and repair of specialist recycling and materials handling equipment across the UK. You'll play a key role in ensuring equipment uptime and delivering a high level of technical support to customers. Key Responsibilities • Installation and commissioning of specialist machinery, • Planned preventative maintenance (PPM), • Reactive breakdown response and fault diagnosis, • Mechanical and basic electrical fault finding, • Working on hydraulic and pneumatic systems, • Completing service documentation and reports, • Background in plant, industrial machinery, materials handling, waste, aggregates, or similar heavy equipment, • Strong mechanical engineering skills (electrical xrnqpay knowledge beneficial), • Experience with hydraulics and conveyor-based systems advantageous, • Comfortable working independently in the field, • Full UK driving licence, • Competitive basic salary, • Paid overtime, • Company van and fuel card, • Door-to-door travel, • Ongoing training and development, • Clear progression opportunities

Job Title: Field Service Engineer Considering making an application for this job Check all the details in this job description, and then click on Apply. Location: Within an hour of Glastonbury Salary: £40,000 basic. OTE: £60,000 + Shift: Days A fantastic opportunity has arisen for an experienced Field Service Engineer to join a well-established engineering business that specialises in large-scale industrial processing machinery. This position offers the chance to work for a company known for its strong reputation, excellent customer base and commitment to investing in its engineering team. The successful Field Service Engineer will benefit from strong earning potential, ongoing training and long-term career development. This role would suit a capable Field Service Engineer with strong electrical and mechanical fault-finding skills who enjoys working independently while providing excellent customer support. The business offers the opportunity to work on a wide range of industrial equipment while developing your technical expertise within a supportive and growing organisation. In this role, you will be responsible for attending customer sites to carry out planned maintenance, servicing and reactive breakdown repairs on industrial processing machinery. You will support installation work, fault finding and component replacement while ensuring machinery is operating efficiently, safely and with minimal downtime. Sector: Industrial Engineering / Field Service Non-Negotiable Requirements of the Field Service Engineer • Strong electrical fault finding skills, • Full UK driving licence, • Experience carrying out planned, reactive and breakdown maintenance Requirements for the Field Service Engineer, • Experience working as a Field Service Engineer or similar role, • Ability to diagnose and repair both electrical and mechanical faults, • Experience working on industrial machinery or processing equipment, • Experience working within an engineering or manufacturing environment Desirable Requirements, • Engineering qualification, • Previous experience within field-based engineering roles, • Experience working on large-scale industrial machinery The Field Service Engineer will benefit from:, • Company van (available for personal use), • Fuel card, • Paid door to door, • Pension For further details, contact Joe McAuliffe at Pioneer Selection. As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and conditions apply. xrnqpay Please see our website for further details.

? Electrical Maintenance Engineer Are you a skilled Electrical Maintenance Engineer looking to take the next step in your career? We're seeking a proactive, safety-focused professional to join our engineering team and play a key role in maintaining and improving our plant and machinery performance. Please read the following job description thoroughly to ensure you are the right fit for this role before applying. The Role As part of our Engineering team, you'll deliver high-quality workmanship while ensuring maximum plant reliability and minimal downtime. You'll be involved in preventative maintenance, fault finding, installations and continuous improvement projects within a fast-paced industrial environment. Key Responsibilities Health & Safety • Ensure full compliance with all EH&S requirements., • Follow SOPs / SSOWs and safe systems of work., • Conduct risk assessments (company system training provided)., • Understand emergency procedures and promote safe behaviours., • Perform plant preventative maintenance in line with Altair CMMS schedules., • Carry out repairs in accordance with repair notification procedures., • Undertake TPM and continuous improvement activities., • Diagnose faults from electrical schematic drawings., • Fault find and maintain drive systems, PLCs and ladder logic., • Manufacture and modify electrical control circuits., • Complete electrical installations to BS7671 standards., • Undertake minor projects and machine modifications., • Modify and upgrade existing equipment where required., • Understand and work with basic pneumatic systems., • Record all work and raise follow-up actions via Altair CMMS., • Maintain effective shift handovers and produce detailed logs., • Liaise with subcontractors and issue permits in line with procedures., • Support other maintenance trades as required., • Book out parts from Engineering Stores and report shortages., • Identify and implement improvements to reduce plant downtime., • Operate Fork Lift Truck and Mobile Elevated Working Platform (training/qualification required). ? What We're Looking For, • Strong electrical fault-finding skills., • Experience with PLC systems and ladder logic., • Understanding of drive systems and electrical schematics., • Knowledge of BS7671 electrical installation standards., • Experience within a manufacturing or industrial environment., • A proactive, problem-solving mindset., • Commitment to high safety and quality standards., • Strong communication skills and ability to work across shifts. Why Join Us?, • Be part of a forward-thinking engineering team., • Opportunity to work on improvement projects and modernisation., • A culture focused on safety, efficiency and continuous improvement. xrnqpay For more information, please call Adam on or email Allocation Number: INDTB

Field Service Engineer If you enjoy life on the road, working across multiple territories, and spending significant time away from home, this Field Service Engineer role is built for you. This is a Field Service Engineer opportunity for engineers who thrive on travel, autonomy, and technically demanding work across Southern Ireland, Northern Ireland, the North of England, and Scotland. As a Field Service Engineer, you will spend a large proportion of your time travelling across Southern Ireland (circa 50%), the North of England and Scotland (circa 30%), and Northern Ireland (circa 20%), supporting customers with the installation, servicing, and repair of high-precision CNC and metal-cutting machinery. This is not a local patch role and will involve regular overnight stays and extended periods away from home. You will be responsible for delivering high-quality technical service rather than high-volume callouts, acting as the technical face of the business in the field. The role offers structured manufacturer training, exposure to advanced machinery, and optional international travel for further development. Job Responsibilities • Install high-precision CNC and metal-cutting machinery across Southern Ireland, Northern Ireland, the North of England, and Scotland, • Carry out planned and reactive service work on mechanical, electrical, and electronic systems, • Diagnose faults and complete on-site repairs in line with manufacturer specifications, • Commission new machinery and complete full customer handovers, • Order replacement parts and manage repairs using technical documentation, • Provide operator and basic maintenance training following installations, • Maintain accurate service reports, job records, and machine histories, • Plan and manage your own workload while travelling extensively between sites, • Liaise with the Service Manager on job progress, parts availability, and technical issues, • Attend technical and product training courses as required, • Previous experience working as a Field Service Engineer on high-precision machinery, • Strong background in CNC lathes, metal-cutting machinery, or similar equipment, • Proven mechanical and electrical fault-finding capability, • Experience working with PLC systems and ladder logic, • Confident reading and interpreting schematics and technical drawings, • Comfortable with extensive travel and regular overnight stays, • Salary up to £35,000, • OTE £48,000+ with bonus potential, • Monday to Friday working pattern, • Extensive travel across Southern Ireland, Northern Ireland, North of England, and Scotland, • Company car provided (BMW 330e or similar), • Annual company performance bonus, • Monthly bonus linked to machinery sales, • Pension contribution matched up to 6% JBRP1_UKTJ

Role Overview Would you like to join a truly international, talent driven company that values Safety, Ethics, Quality, Innovation and Employee Opportunity? Otis is growing and is looking for an installation Engineer to join the team. Your priority is to ensure the safety of passengers and technical stakeholders by safely installing a portfolio of elevator units. On a typical day you will: Install new elevators with quality and efficiency Work in a safe manner in accordance with all Environmental Health & Safety guidelines. Stay away overnight as and when required Liaise directly with the customer while on site to build a good working relationship Conduct inspection before and after installation to ensure high quality and safety standards What you will need to be successful As a qualified mechanic, it is essential that you have knowledge of elevator equipment and that you can apply elevator engineering principles to Installation. You are qualified to install elevators to NVQ3 level You hold a driver's license You have at least 6 months of experience in the field of elevators, ideally acquired in the assembly activity or at least experience on site and / or installation You have good electrical and mechanical skills. You are comfortable with plan reading and calculations. You have an appetite for technical products and new technologies. You appreciate manual trades as well as the satisfaction of seeing the finished work. What's In it For Me / Benefits We offer you remuneration in accordance with local standards plus: We will train you intensively in the areas of technology & processes and you can exchange ideas with experienced colleagues at any time. You will receive modern and high-quality work clothes, your own tools, and iPhone The health and safety of our employees is our top priority. We promote this through regular training on the subject of occupational health and safety as well as through an employee support program. Apply today to join us and build what's next! If you live in a city, chances are we will give you a lift or play a role in keeping you moving every day. Otis is the world's leading elevator and escalator manufacturing, installation, and service company. We move 2.4 billion people every day and maintain approximately 2.4 million customer units worldwide, the industry's largest Service portfolio. You may recognize our products in some of the world's most famous landmarks including the Eiffel Tower, Empire State Building, Burj Khalifa and the Petronas Twin Towers! We are 72,000 people strong, including engineers, digital technology experts, sales, and functional specialists, as well as factory and field technicians, all committed to meeting the diverse needs of our customers and passengers in more than 200 countries and territories worldwide. We are proud to be a diverse, global team with a proven legacy of innovation that continues to be the bedrock of a fast-moving, high-performance company. When you join Otis, you become part of an innovative global industry leader with a resilient business model. You'll belong to a diverse, trusted, and caring community where your contributions, and the skills and capabilities you'll gain working alongside the best and brightest, keep us connected and on the cutting edge. We provide opportunities, training, and resources, that build leadership and capabilities in Sales, Field, Engineering and Major Projects and our Employee Scholar Program is a notable point of pride, through which Otis sponsors colleagues to pursue degrees or certification programs. Today, our focus more than ever is on people. As a global, people-powered company, we put people - passengers, customers, and colleagues - at the center of everything we do. We are guided by our values that we call our Three Absolutes - prioritizing Safety, Ethics, Quality in all that we do. If you would like to learn more about environmental, social and governance (ESG) at Otis click here . JBRP1_UKTJ

Bristol (Office Based) Competitive Salary + Bonus + Benefits Are you a HVAC Specialist with hands-on expertise in fault diagnosis across a range of ASHPs? Ready to transition off the tools and into an office-based Technical Helpdesk role? If so, this could be the perfect opportunity for you. Whats In It For You? At Daikin UK we value our employees and their contributions. We offer a comprehensive rewards package including: • Highly competitive bonus., • Employer Pension Contributions at 7%, • Comprehensive private medical and personal accident insurance plans. As a Technical Specialist, youll leverage your technical expertise to resolve a variety of customer queries, translating their concerns into effective troubleshooting strategies. You Will Be: • Acting as the point of escalation to resolve installation and/or service enquiries, youll know the right questions to ask in order to reach a conclusive diagnosis., • Competent with electrical schematics and problem solving in a fast paced-environment., • Building strong relationships and trust with customers through excellent communication. You are technically astute, with a strong ability to diagnose and resolve issues across a range of ASHPs; specific Daikin Altherma experience would be highly advantageous. You possess: • City & Guilds in Heating & Ventilation L2 or equivalent experience, • F-gas (2079) qualified, with adept experience handling refrigerants., • G3 unvented cylinders / hot water systems Your Interview Journey: Interview 1: Introduction and Exploration Call With: Your Daikin Recruitment Business Partner Purpose: For you to get the lowdown on Daikin; who we are, what we do, and what makes us tick. It also provides us with an opportunity to understand your experiences, motivations, and personality. Interview 2: Structured Interview With: Hiring Manager Purpose: A detailed discussion to explore your work experience and delve into Daikin's operations, focusing on the specifics of the role. Interview 3: Final Formal Interview With: Hiring Manager and a Senior Management Team Member Purpose: Your opportunity to demonstrate your technical knowledge and expertise, by answering some in-depth technical questions relevant to the role. About Us: Daikin UK Ltd provides innovative, premium quality, indoor climate management solutions to meet the changing needs of our residential, commercial, and industrial customers. Over 100 years of precision and innovation has helped Daikin UK build a worldwide reputation for quality and technology. We are committed to fostering a diverse and inclusive workplace where all employees and applicants are valued and respected. We believe that diversity in our team enhances creativity, innovation, and performance. We welcome applications from individuals of all backgrounds. Join us in creating an environment where everyone can thrive. JBRP1_UKTJ

Role: Field Service Engineer - Utilities Shift: Days (Field Based) Basic Pay: Up to £44,000 + Profit Related Bonus Location: Home Based - South West UK (with UK travel) Are you a time-served engineer who enjoys working on a variety of industrial equipment and solving problems on customer sites? Perhaps you're currently working in maintenance and looking to move into a field-based role where no two days are the same. Yolk Recruitment are working with a growing engineering business who specialise in industrial water treatment and process utility systems, supporting customers across the UK with installation, service and technical support. Their engineering team works closely with industrial clients to maintain critical plant systems and ensure they operate safely, efficiently and in line with environmental standards. This is a great opportunity for a multi-skilled engineer who enjoys fault finding, working independently and building strong relationships with customers. This is what you'll be doing As a Field Service Engineer you will be responsible for supporting customers across the South West, carrying out maintenance, troubleshooting and commissioning of industrial utility systems. Responsibilities include: • Carrying out planned preventative maintenance and servicing on industrial water treatment systems at customer sites., • Diagnosing and resolving faults across mechanical and electrical systems including pumps, valves, filtration systems and treatment equipment., • Supporting the installation and commissioning of new plant and systems where required., • Providing technical support both on-site and remotely to help customers resolve operational issues., • Completing service reports and documentation following site visits., • Managing relationships with customers and plant operators while on site., • Ensuring all work is carried out safely and in line with company health and safety procedures., • Supporting improvement initiatives and identifying opportunities to improve system performance and reliability. Qualifications • Electro-mechanical engineering background with relevant engineering qualification., • Experience working on industrial plant, pumps, filtration systems, pipework or utilities equipment., • Experience in a field service or customer facing engineering role would be beneficial., • Strong fault finding ability across mechanical and electrical equipment., • Good communication skills and ability to work independently., • Full UK driving licence. Experience within water treatment would be advantageous, however engineers from sectors such as utilities, pumps, facilities, chemical processing or industrial maintenance may also be suitable. And this is what you'll get in return A competitive salary alongside a strong benefits package including profit related bonus, company vehicle and fuel card, health and wellbeing cash plan and workplace pension scheme. You'll be joining a growing engineering business that supports industrial clients across the UK and internationally, offering the opportunity to develop your skills across a range of process and utility systems while working in a varied and technically interesting field role. Are you up to the challenge? Are you what we're looking for? Please get in touch today with engineering specialist recruiter Liam Reid. Please apply with a CV and feel free to include a cover letter outlining why you're perfect for the role. We also have a referral scheme so if you know someone who would be great for the role please get in touch. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities. JBRP1_UKTJ

Great opportunity for a Quality Assurance Senior Engineer to work for a globally recognised organisation. Job Purpose / Overview The Quality Assurance Senior Engineer takes responsibility for delivery and compliance with the LTQR Processes and Procedures for documents, records and physical samples, that are associated with their designated Projects and Multi-Disciplinary Team (MDT). To discharge the role requires a range of technical skills and competences, management and communication skills, construction/ installation/ commissioning and end-user stakeholder awareness, demonstration of contractual requirements and knowledge of various Standard company Project Arrangements and Quality Control Procedures. Principal Accountabilities Gather and validate data for monthly Records dashboards Support authoring of management system documentation Support workshop facilitation, requirements gathering and compilation of findings Contribute to the production of quality records dashboards on a regular basis for a variety of audiences Provide regular progress reporting to Quality Document, Records and Completions management. Identify gaps & improvements, propose solutions Prepare materials for engagement with Nuclear and Environmental Regulators Participate in defining and implementing solutions and monitoring their effectiveness Champion the use of Records Management Processes across the project and with external stakeholders All other tasks as requested by the Records Branch managers Assit suppliers and QMLs in the development of partitioning strategies and driving for full LDRC population with complete and correct metadata. Assist with the tracking of submission of records documents and relevant physical samples in line with the agreed LDRC, LTQR, planned/Forecast submission dates and project schedule Liaising with other off-site/on-site MDT stakeholders to ensure the timely and progressive delivery of LTQRs including the organising reviews of LTQR deliverables in coordination with QMLs, QDMs and distribution managers. The Qaulity Assurance Senior Manager will: Work with the Project, Quality and Completions Managers, ensuring the Works Information (WI) has suitable and sufficient content within, pertaining to the collation of Handover Documentation and manage subsequent reviews of this documentation prior to Handover in accordance with distribution and lead reviewer. Lead and manage an assigned team of Record Support Officers, collaborating with other members of the Records team and wider Document, Records and Completions Team, to ensure efficient timely delivery, review and approval of all relevant LTQRs to enable follow on works and installation / commissioning and or takeover. Direct and liaise with the Quality Managers and Project Team to ensure that contractor’s produced partitioning strategy for LTQR work is acceptable and current to company and provide continued support as necessary reviewing and commenting when revisions are required. Refine and implement a delivery strategy to support the successful management and promotion of a unified approach to LTQR compilation, submission and review for handover as required of areas, assets, systems and contract work packages/scopes, both for offsite and onsite works. This includes authoring and maintaining suitable work instructions related to an area and or work scopes identifying a graded approach to LTQR reviews where necessary, capturing and implementing lessons learned. Produce and manage the associated LTQR technical and non-technical checklists, identifying required inputs for the review by various stakeholders. Ensure checklists are filed and stored correctly following completion and submittal to company in the EDRMS and reference linked to the relevant LTQR. With respect to Licence Condition 6 (LC6), manage awareness, adherence and compliance of contractors, delivery teams and associated MDT’s ensuring they are fully aware of their LTQR and LC6 obligations and requirements. Organise briefings, meetings, presentations and provide guidance and familiarisation of these requirements, to better prepare the Contractor to deliver the correct documentation, to the required standard at the appropriate time, in the Project Life Cycle, including but not limited to: company Supply Chain and LTQR Audit actions, arranging LTQR Kick-off and Refresh meetings as well as providing general LTQR expertise for physical samples. Liaise with Tier 1 Contractors, other members of the Document, Records and Completions team and associated company MDT’s, to ensure that any subsidiary or associated LTQRs are clearly identified, related, scheduled and documented: for example, linking offsite manufacturing and onsite records and communicate to stakeholders as required. Represent the LTQR team at relevant Quality Boards as hosted by QDM’s and other required meetings providing clarity around status of scope delivery, needs in line with schedules. Generate and interpret reports as required to demonstrate a clear management of the status of LTQRs in each area including knowledge around asset, hold points, witness points or milestones as deemed relevant. Direct and be involved with any tools that assist Lead Reviewers and QMLs to optimise the reviewing of LTQRs which may include but are not limited to:- LTQR reviewing and commenting which may include Non-Technical and Technical checks in consultation with QMLs, Assist to define LTQR distribution solutions, Support deployment and use of bespoke computer systems such as Asset Suite (ASM) and Switch, Assist with the construction of bulk acceptance containers for the processing of LTQRs Support of modulated LTQR surveillance and maintenance of RFT and FOAK currency. Development of AI tools Keep Modulated Surveillance Work Instructions current Keep LTQR temporary Work Instruction current as new tools and processes are identified. Develop, evolve and actively lead training schemes for LTQR systems and processes, provide guidance on improvements to reporting of LTQRS, verify information and suggest amendments to EDRMs data as necessary across all available relevant tools. Support Quality records auditing, QML, PM and CFSI Awareness information delivery as well as LC6 Steerco and ONR information delivery. Other similar requirements may need to be supported from time to time such as LC6 Self-Assessment input.- Contribute to periodic reviews and revisions of relevant company procedures, specifications and supporting documentation in accordance with procedural requirements. • In co-ordination with Quality, Engineering and Project Management effectively manage the life cycle of records (creation, classification, retention, retrieval, preservation and disposal), ensuring compliance with regulations and standards, reducing risk, improving efficiency, and preserving valuable information for future reference. Knowledge and Skills Essential Extensive knowledge around specified technical qualification Microsoft Office Suite Project management skills Qualifications and Experience Essential Tertiary qualifications in Civil, Mechanical, Electrical Engineering, construction management and or I&C or equivalent. Experience in using Electronic Document Management Systems Vocational training, qualifications and experience within a given specialist field e.g. level 3 Welding qualification or equivalent, Electrical certification (Level 3 diploma in Electrical installations or equivalent), coating qualifications (Accredited member of AMPP or equivalent). Extensive experience in the delivery of large, complex projects, including Oil & Gas, Power, Chemical and Industrial with specialism in each area e.g. welding or coatings Experience of operating in a high security environment. Desirable Chartered status Experience of successfully completing areas of projects with a value of £50M to 100M or similar sized complex projects (£1B - £3B) Experience in the installation and erection of large Petro-chemical, Civil, Mechanical or Electrical plant with nuclear experience being an advantage

Gas Installer – Social Housing (BA/ BS region) Salary: £45,000 + Bonus + High Earning Potential Location: BA/ BS regions Benefits: Company Van + Fuel Card + Overtime + Excellent Perks Example Recruitment Group are proud to be working in partnership with a market-leading compliance and energy services provider operating across the UK. With over 3,200 employees across 20 offices, our client is a trusted name in the industry — known for delivering quality, safety, and innovation in domestic gas, commercial gas, renewables, and electrical services. We’re now looking for an experienced Gas Installer to join their skilled team, delivering heating services within the social housing sector across the BA/ BS regions. What’s on Offer * £45,000 per annum plus bonus * High earning potential with paid hours: 11 hours per combi swap / 18 hours per conversion * Company van & fuel card provided * Overtime available to boost your earnings * Long-term contracts offering job security and career progression * Salary exchange pension scheme * Employee assistance programme * 28 days annual leave (including bank holidays), rising with length of service * Enhanced family leave (dependent on service length) The Role * Carry out heating installations to survey and client specifications, adhering to all regulations and safety standards * Manage your own installations day-to-day and deliver work to a high professional standard * Complete all contract paperwork accurately and on time * Report any issues or deviations to your Installation Supervisor * Ensure cleanliness, professionalism, and respect in every home you visit * Attend recalls if required * Maintain compliance with Health & Safety and Environmental procedures What We’re Looking For * Valid ACS and relevant gas qualifications * Full UK Driving Licence (maximum 6 points) * Previous social housing experience desirable but not essential * Strong commitment to customer service and professionalism * Ability to work with a diverse customer base Our client is one of the UK`s largest and most successful gas contractor, built on long-term partnerships that provide their engineers with stability, progression, and pride in their work. If you’re ready to take the next step in your gas engineering career with a company that rewards skill and dedication — apply today

The Field Engineer is responsible for the surveillance of quality compliance within the designated section of the Works in accordance with company surveillance strategy requirements and will report to the Construction Superintendent for day to day guidance. The Field Engineer will also input into site wide management issues and a high level of interaction and coordination with other operational members of the site wide team will be required. In addition to reporting and liaising responsibilities, the Field Engineer will be required to: Adhere to (and suggest enhancements and improvements to) company policies, procedures and protocols for construction, health & safety and other functions. Check the Works are constructed in accordance with the contract and notify the Construction Superintendent of non-conformance request requirements Submit details of any non-conformance request requirements to assist in the issuing of nonconformance reports Proactively communicate with other site teams, maintain good communication links and ensure surveillance is timely reported Contribute surveillance information to support KPI indicators Endeavour to identify potential Quality issues before they arrive to enable mitigating actions Support team instructions to take temporary measures to mitigate and keep works safe and within Quality standards. Knowledge, Skills, Qualifications & Experience Essential Required Qualifications: 18th Edition Wiring Regs (BS7671) & Inspection & Test (C&G 2391), CSCS or SMSTS Broad knowledge and wide understanding of the building industry, materials, trades methods and legal requirements Excellent organisation, delegation and communication skills. Ability to work within a high performing team that continuously outperforms expectations and objectives Proven experience of writing diaries which are accurate, concise and with relevance to the particular form of contract Proven track record of working within a large construction team A minimum of HND in a Civil/ Mechanical/ Electrical Engineering qualification or equivalent vocational training and experience Good attention to detail when checking work and materials Able to establish appropriate working relationships with the contractors Persuasive and diplomatic whilst remaining independent Desirable Experience in the installation and erection of Electrical plant. General understanding of the posts obligations under CDM Regulations – along with an understanding of the document and drawing approvals processes Strong communication skills in English is required, and knowledge of French can be an advantage Experience in the use of electronic hand held devices to capture information As this position specialises in Electrical Installations through the construction phase, the following also applies: Desirable Qualifications: EUSR National Grid Access Persons Desirable Awareness: Experience with LV / MV electrical distribution systems

Our client, a leading renewable energy company, is currently seeking a Solar Field Service Engineer to join their Operations & Maintenance (O&M) team in the South West. This is a fantastic opportunity to advance your career with one of the largest and fastest-growing solar energy developers globally. Key Responsibilities: Carry out both preventative and corrective maintenance on electrical components, including inverters and solar modules Deliver electrical maintenance services across a regional portfolio of solar farms Coordinate and manage relationships with local subcontractors Consistently follow HSE procedures and contribute to ongoing risk assessments Job Requirements: Electrically competent, with hands-on experience Ideally holds a recognised qualification such as City & Guilds 2382-18 (18th Edition) Previous experience with industrial PV installation or maintenance is highly desirable Full, clean driving licence required Strong team player with good communication skills Benefits: Competitive salary Opportunity to work with a global leader in solar energy Professional development and training opportunities Comprehensive benefits package Supportive and collaborative work environment If you are an experienced Solar Field Service Engineer eager to further develop your career, our client would love to hear from you. Apply now to join their dynamic and innovative team in the South West

We have an exciting opportunity for an experienced Contract Site Manager to join our customer on a long-term project based in Somerset. As our client is considered exempt for IR35 purposes, the successful candidate will be responsible for assessing IR35 status, should you wish to operate via your own PSC. Our Somerset based customer is a well-respected provider of warehouse automation, logistics integration, and structural installation solutions, delivering complex projects across distribution, manufacturing, and live operational environments. Due to a key project requirement, they are looking for a skilled contractor to support the safe and compliant delivery of a major on-site installation programme. As a Contract Site Manager, you will play a crucial role in overseeing site operations, supervising subcontractors, coordinating multiple work packages, and ensuring that all installation and construction activities are delivered safely, efficiently, and in line with programme and quality expectations. Key Skills / Experience Required -Proven experience as a Site Manager or Site Supervisor within construction, industrial installation, or warehouse/logistics environments. Strong background in multi-contractor coordination across mechanical, electrical, structural, and IT installation works. -Experience delivering projects involving systems such as racking, mezzanines, conveyors, pallet lifts, AMRs, shuttle systems, or warehouse automation technologies. -Good understanding of health & safety legislation, particularly CDM 2015. -Ability to manage quality, progress, subcontractor compliance, and site logistics on complex live projects. -Experience using digital reporting or project management platforms such as Procore would be highly advantageous. Comfortable working in operational warehouses, manufacturing sites, or distribution environments. -Monitor installation quality against approved drawings, technical specifications, manufacturer standards, and QA/QC plans. Qualifications / Training SMSTS - Essential CSCS Site Manager Card - Essential For more information or to apply for this Contract Site Manager position in Somerset, please contact Kieran Pratt at (url removed) Or call (phone number removed), quoting reference KDP1050

Electrical Installation Lecturer. Lecturer in Electrical Installation. Electrical Installation has been identified as a key strategic priority, and we are committed to supporting growth and investment in this area.

Electrician, Industrial Electrician, Trainee Approved Electrician, Electrical Installation, LV, ELV, Water Industry, Wastewater, Utilities, Electrical Engineer, Site Electrician, Cable Installation, Containment, Inspection and Testing Training. Install LV and ELV electrical systems on industrial sit

Assess and support apprentices on Electrical Installation programmesBuild and maintain strong relationships with learners and employers*Monday to Friday, 37 hours per week. Level 3 in Electrical Installation and a 18th edition *Professional, organ

Security Installation Technician.

Position: Electrical Installation Engineer.

Are you an experienced Electrical Installation Technician - Midlands with a background in vehicle electrical systems and onboard technology? This is an exciting mobile opportunity to work on a wide range of vehicles, delivering advanced onboard systems for fleet and public transport applications acr

Electrical Installation Engineer - Full Time. Electrical Installation Engineer. Install, test, and inspect electrical systems in customer premises, ensuring compliance with the latest el.

Are you an experienced Electrical Installation Technician - South with a background in vehicle electrical systems and onboard technology? This is an exciting mobile opportunity to work on a wide range of vehicles, delivering advanced onboard systems for fleet and public transport applications across

Electrical Installation SupervisorSalary depending on experience38 hours basic plus overtimeEstablished ManufacturerGood company cultureAnnual Attendance bonus of £500Our client is a reputable manufacturer in Heywood and due to continued growth are looking for an Electrical Installation Supervisor.

We're seeking a skilled Electrical Installation Engineer to support the installation, commissioning, and integration of critical power systems nationwide. The Electrical Installation Engineer role comes with a competitive salary + tr.