Trabajos electrical installation en ChesterCrear alertas

Commercial Heat Pump Engineer - No Call-out Midlands £48,000 Basic Salary Full-Time | Permanent We're recruiting an experienced Commercial Heat Pump Engineer for an established renewable heating specialist delivering residential and commercial heat pump installations This is an excellent opportunity for an engineer with experience in ground source heat pumps, heat pump commissioning and hydronic heating systems to join a technically focused engineering team. You'll primarily cover the Midlands, with occasional nationwide travel, carrying out servicing, maintenance, commissioning and fault finding on residential and commercial heat pump systems. The Role Service and maintain residential and commercial heat pump systems Diagnose and repair mechanical, electrical and heating system faults Commission commercial heat pump installations, ensuring correct operation and system performance Install and service ground source heat pump systems Troubleshoot heating system performance issues and implement effective solutions Carry out remote monitoring and diagnostics of heat pump installations Check system temperatures, pressures, flow rates and operating performance Work with hydronic heating systems, pumps, controls and associated mechanical equipment Interpret technical drawings, wiring diagrams and hydraulic schematics Liaise with internal operations teams to support quotations for remedial works and system upgrades Coordinate with subcontractors on complex technical issues Provide technical advice and support to customers Complete commissioning reports, service records and compliance documentation Ensure all work meets relevant health and safety requirements The Candidate Proven experience in heat pump installation, servicing, maintenance and commissioning Ground source heat pump experience highly desirable NVQ Level 2 or 3 in Plumbing, Heating or equivalent G3 Unvented Hot Water qualification F-Gas certification Strong understanding of renewable heating technologies and hydronic systems Experience diagnosing mechanical, electrical and controls faults Ability to read and interpret technical drawings and schematics Good IT skills and experience using diagnostic equipment Strong technical problem-solving abilities Excellent communication and customer service skills Comfortable working independently and travelling to customer sites Full UK driving licence Desirable experience: Commercial-scale heat pump systems Electrical wiring and heat pump controls Remote monitoring and diagnostic platforms MCS-accredited installations Candidates currently working as Heat Pump Engineers, Ground Source Heat Pump Engineers, Renewable Heating Engineers, Commissioning Engineers or Commercial Heating Engineers are encouraged to apply. Package £38,000-£48,000 basic salary Full-time, permanent position Predominantly Midlands-based projects Varied residential and commercial heat pump work Exposure to technically challenging renewable heating systems Opportunities to develop specialist commissioning and diagnostic expertise The Opportunity This is an excellent opportunity for an experienced Heat Pump Engineer looking for a technically varied position with a renewable heating specialist. You'll work across ground source heat pumps, residential and commercial heating systems, commissioning and advanced fault diagnostics, helping customers achieve reliable and efficient system performance. The role offers an excellent balance of hands-on engineering, technical problem-solving and customer interaction, with opportunities to develop your expertise in commercial heat pump technologies. Heat Pump Engineer → Senior Heat Pump Engineer → Lead / Technical Engineer → Technical Manager WR HVAC | M&E are the #1 recruitment partner for HVAC and M&E vacancies across the UK, Europe, and the USA. We work with manufacturers, distributors, contractors, and service providers across the heating, ventilation, air conditioning, refrigeration, and building services sectors, recruiting for sales, management, engineering, and technical roles. WR HVAC | M&E is acting as an Employment Agency in relation to this vacancy. JBRP1_UKTJ

Title: Multi Skilled Engineer Location: Chester Salary: £53,000 - £54,000 Industry: Food Manufacturing Job Type: Permanent, Full Time Shift: 4 on 4 Off, Days and Nights Looking to Hire Urgently! Multi Skilled Engineer Benefits: Company pension scheme Holiday allowance Career progression and development opportunities Supportive engineering, production, and site leadership teams Opportunity to contribute to continuous improvement and engineering projects Key Multi Skilled Engineer Responsibilities: Carry out planned preventative maintenance (PPM), reactive maintenance, servicing, repairs, and inspections across site machinery and equipment. Respond promptly to emergency machine breakdowns throughout the plant to minimise production downtime. Diagnose the cause of potential equipment failure, performance deterioration, and recurring faults, completing remedial work where possible during the shift. Where issues cannot be resolved during the shift, provide a clear handover to the following shift and Engineering Team Leader, including the cause of the issue and recommended solution. Ensure machinery and equipment remain safe, reliable, efficient, and fit for purpose. Carry out overhauls, repairs, modifications, and improvements to machinery and engineering equipment. Support the design, installation, commissioning, relocation, and modification of new and existing machinery and equipment. Conduct appropriate risk assessments before undertaking maintenance activities and ensure all identified control measures are implemented before work begins. Ensure all engineering activities are completed in accordance with Health & Safety legislation and company requirements. Record all maintenance activities, breakdowns, repairs, and engineering work accurately within the CMMS. Identify opportunities for continuous improvement and contribute to improving engineering standards, equipment reliability, and overall plant performance. Set, review, and maintain appropriate engineering standards and procedures to support continuous improvement. Multi Skilled Engineer Requirements: Essential: Relevant engineering qualification, apprenticeship, or equivalent practical engineering experience. Previous experience working within a manufacturing, production, FMCG, or food manufacturing environment. Strong mechanical and/or electrical engineering fault-finding and maintenance experience. Proven experience carrying out planned preventative and reactive maintenance on industrial machinery and equipment. Experience responding effectively to machinery breakdowns within a fast-paced production environment. Strong problem-solving skills with the ability to identify root causes of equipment failures and implement effective solutions. Ability to work safely and confidently with industrial machinery and engineering equipment. Good understanding of Health & Safety requirements and the importance of completing risk assessments before maintenance activities. Ability to accurately record maintenance activities, breakdowns, and engineering work using a CMMS or similar maintenance system. Desired: Time-served engineering apprenticeship. Relevant electrical or mechanical engineering qualification such as City & Guilds, ONC, HNC, HND, or equivalent. Experience with root cause analysis, continuous improvement, reliability improvement, and engineering standards. Experience working with CMMS maintenance systems. TPBN1_UKTJ

Title: Shift Engineer Location: Chester Salary: £53,560 Industry: FMCG / Food Manufacturing Job Type: Permanent, Full Time Shift: 4 on 4 Off, 07.00 - 19.00 / 19.00 - 07.00, including a 30-minute paid break Reporting To: Site Lead Shift Engineer Benefits: Company pension scheme Holiday allowance Career progression and development opportunities Supportive engineering, production, and site leadership teams Opportunity to contribute to continuous improvement and engineering projects Key Shift Engineer Responsibilities: Carry out planned preventative maintenance (PPM), reactive maintenance, servicing, repairs, and inspections across site machinery and equipment. Respond promptly to emergency machine breakdowns throughout the plant to minimise production downtime. Diagnose the cause of potential equipment failure, performance deterioration, and recurring faults, completing remedial work where possible during the shift. Where issues cannot be resolved during the shift, provide a clear handover to the following shift and Engineering Team Leader, including the cause of the issue and recommended solution. Ensure machinery and equipment remain safe, reliable, efficient, and fit for purpose. Carry out overhauls, repairs, modifications, and improvements to machinery and engineering equipment. Support the design, installation, commissioning, relocation, and modification of new and existing machinery and equipment. Conduct appropriate risk assessments before undertaking maintenance activities and ensure all identified control measures are implemented before work begins. Ensure all engineering activities are completed in accordance with Health & Safety legislation and company requirements. Record all maintenance activities, breakdowns, repairs, and engineering work accurately within the CMMS. Identify opportunities for continuous improvement and contribute to improving engineering standards, equipment reliability, and overall plant performance. Set, review, and maintain appropriate engineering standards and procedures to support continuous improvement. Shift Engineer Requirements: Essential: Relevant engineering qualification, apprenticeship, or equivalent practical engineering experience. Previous experience working within a manufacturing, production, FMCG, or food manufacturing environment. Strong mechanical and/or electrical engineering fault-finding and maintenance experience. Proven experience carrying out planned preventative and reactive maintenance on industrial machinery and equipment. Experience responding effectively to machinery breakdowns within a fast-paced production environment. Strong problem-solving skills with the ability to identify root causes of equipment failures and implement effective solutions. Ability to work safely and confidently with industrial machinery and engineering equipment. Good understanding of Health & Safety requirements and the importance of completing risk assessments before maintenance activities. Ability to accurately record maintenance activities, breakdowns, and engineering work using a CMMS or similar maintenance system. Desired: Time-served engineering apprenticeship. Relevant electrical or mechanical engineering qualification such as City & Guilds, ONC, HNC, HND, or equivalent. Experience with root cause analysis, continuous improvement, reliability improvement, and engineering standards. Experience working with CMMS maintenance systems. TPBN1_UKTJ

CHG Electrical is seeking a Field Electrical Project Engineer to deliver electrical works across water and wastewater infrastructure. You will work between the office, project teams and live sites to ensure electrical systems are installed, tested and commissioned safely, correctly and to specification. You’ll review designs, RAMS and coordinate installation activities, supporting procurement and working with subcontractors to resolve technical issues. #J-18808-Ljbffr

Lead Air Conditioning Engineer Location: Chester Our client is a well-established and rapidly growing renewable energy business with a strong reputation across the renewable sector, including Solar PV and Heat Pump installations. Due to continued growth and increasing demand, they have recently launched a dedicated Air Conditioning division and are looking to appoint an experienced Air Conditioning Engineer to help drive its development. This is an exciting opportunity for an ambitious engineer who wants more than just another service role. The successful candidate will play a key part in shaping and growing the company's Air Conditioning offering, with the opportunity to build and lead a dedicated team in the future. • Surveying and assessing new Air Conditioning projects, primarily domestic split-system installations., • Installing Air Conditioning systems alongside the company's in-house electrical team., • Carrying out post-installation inspections and ensuring all work meets industry standards and company expectations., • Diagnosing faults and carrying out repairs on Air Conditioning systems., • Undertaking F-Gas related work across a portfolio of over 2,000 installed heat pump systems., • Supporting the development and growth of the Air Conditioning division., • £40k-£50k Salary - negotiable depending on experience., • Company vehicle and fuel card., • Company uniform., • 25 days leave plus bank holidays., • Company pension scheme., • Private healthcare and Dental, • Clear progression opportunities into management., • Valid F-Gas Certification (Cat 1), • Proven experience installing, servicing, and fault-finding Air Conditioning systems, • Full UK driving licence, • Commutable to Chester / South Cheshire or Shropshire Air Conditioning, HVAC, Ventilation, AC Engineer, VRF System, VRV system, Fgas, F-gas, F Gas, Air Source Heat Pumps INDMP #J-18808-Ljbffr

Help us to make a world of difference Urenco is a global leader in the production of low carbon energy. We work at the cutting edge of the transition to a sustainable, net zero world. We’re looking for a Senior Project Engineer (Acceptance & Commissioning Lead) based at our Capenhurst location you will manage specialist project requirements, ensuring timely delivery within budget, while maintaining the highest quality standards and fostering strong client relationships. At Urenco we’re committed to giving you opportunities to be your best. We believe in embracing the passion and potential of our people, and to achieve this we offer market leading training and development experiences. Along with the opportunity to be mentored and coached by some of the smartest minds in the industry. • Lead the preparation, review, and approval of commissioning activities across projects., • Develop and manage robust Commissioning and Acceptance Plans, ensuring successful coordination of commissioning interfaces and project handover., • Plan, coordinate, and oversee commissioning activities across multiple projects and engineering disciplines., • Manage commissioning hold points, test records, observations, and reservation lists throughout the commissioning lifecycle., • Witness, review, and approve Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT), ensuring equipment and systems meet technical, quality, and operational requirements., • Attend global supplier sites to support and oversee FAT activities prior to equipment shipment., • Verify that systems, equipment, and facilities perform as intended through structured testing, validation, and acceptance processes., • Review and provide technical assurance on commissioning deliverables produced by contractors and project teams., • Provide technical support and guidance during installation, testing, commissioning, and handover activities., • Identify, assess, and resolve technical issues encountered during project delivery., • Support effective decision-making through engineering expertise and practical problem-solving., • Identify, assess, and mitigate engineering and commissioning risks to ensure project objectives are achieved safely and efficiently., • Manage the collation and completion of life-time quality records, handover certificates, and commissioning documentation., • Produce high-quality commissioning documentation, including SAT procedures, commissioning plans, and handover packs., • Support operational readiness and the successful transfer of assets to Operations and Maintenance teams., • Ensure all commissioning records and supporting documentation are completed to the required quality standards., • Support successful project closure through the completion of commissioning and acceptance activities., • Drive continuous improvement across engineering and commissioning activities by applying lessons learned and industry best practice., • Promote standardisation, efficiency, and knowledge sharing to enhance future project delivery and operational performance. To succeed as a Senior Project Engineer (Acceptance & Commissioning Lead) at Urenco, you will require: • HNC, HND or Degree in an Electrical Engineering discipline, or equivalent industry experience., • A minimum of 10 years of Project Engineering experience, demonstrating a proven track record of successful project delivery., • At least 5 years of experience working across the full design project lifecycle, including concept development, execution, and commissioning., • Experience in leading and working within multi-cultural teams across diverse project environments., • Strong leadership skills with the ability to manage multi-disciplinary teams, while working independently with minimal supervision., • Demonstrable success in overseeing projects from conception to delivery, ensuring the achievement of key objectives in terms of cost predictability and quality assurance., • Proven capability in managing complex projects, with a focus on delivering high-quality results on time and within budget. More than just a job, we offer a future. More than just a place to work, we provide an opportunity to prosper. • Generous Annual Leave: Starting at 25 days, increasing by one day every two years (up to 30 days), plus 13 additional flexible days. Option to buy or sell up to 5 holiday days., • Family-Friendly Policies: A wide range of policies to support work-life balance and family needs., • Bonus Scheme: A competitive bonus scheme based on company and individual performance., • Pension Scheme: Defined contribution plan with up to 16% employer contribution., • Private Medical & Dental Cover: Single cover, with the option to purchase additional benefits., • Flexible Benefits: Life assurance, income protection, and benefits tailored to your lifestyle., • Training & Development: Personalised learning and development opportunities to support your career growth. Due to the nature of the industry in which Urenco operates, successful candidates will be required to obtain and maintain the appropriate level of security clearance for the role. All offers of employment are subject to satisfactory completion of the required vetting and screening checks. As a truly global organisation with operations in the UK, USA, Germany, and the Netherlands, we know that our differences make us stronger. We are committed to creating an inclusive workplace where everyone feels valued, respected, and empowered to succeed. If you require any reasonable adjustments during the recruitment process, please let our Talent Acquisition team know. Because together, we are One Urenco. We are enriching the world. And enriching your future #J-18808-Ljbffr

Want to be part of a UK hub, in a global business that is scaling rapidly, evolving fast and radically changing the decades-old delivery universe? If so, read on, as we’re looking for a Field Service Engineer to join our Network Health team! Our mission? To switch up the status quo and become the UK’s leading out-of-home business. With a fast-growing network of thousands of smart lockers, hundreds of leading retail partners and the launch of our transformative Send service, we’re bringing freedom to anyone with a parcel. At InPost UK, we’re building an unparalleled group of talent that’s committed to help us power our mission to reshape the way parcels move, and redefine eCommerce logistics. Our team is packed full of top-notch experts in e-commerce, technology, scale-up growth, sustainability, logistics and supply chain. We’re a passionate bunch with high ambition – we collaborate, innovate, support each other, and leave egos at the door. A hands on field-based role to repair our parcel lockers on client’s sites, task include Break-fix, Maintenance, software configuration, quality control, and providing technical support and training to employees and subcontractors. Actively involved in developing new solutions and maintaining technical documentation. • Diagnosing and repairing faults and malfunctions of parcel locker machines (APMs) on site, ensuring minimal downtime and optimal performance., • Maintenance and modernisation of parcel locker machines, including implementing hardware and software upgrades to enhance reliability and efficiency., • Diagnostics, reconfiguration, and installation of computer software or firmware for computer, electronic, and electromechanical equipment, ensuring compatibility and security compliance., • Processing and reporting on assigned repairs using communication channels utilised within the organisation, • Managing tools and components for parcel locker machines., • Handling systems for managing personnel-related matters., • Quality control of work performed by internal employees and subcontractors ensuring adherence to technical standards, contractual agreements, and company guidelines, • Providing technical and substantive support to employees and subcontractors (including international ones) via communication and IT channels used within the company., • Participating in the development of solutions for new types of parcel locker machines., • Preparing and updating technical manuals and documentation. This role will require occasional training and visits to our office base in Hemel Hempstead and will need to be located near or within the Chester area to be considered to focus on covering this patch area. Hours are 8:30 - 5:30 (40 hr work week)(830 on site). You will be provided a van but it will be for company use only. We’re looking for people who are ready for a fast paced environment, get their kicks out of problem solving and can balance getting today's stuff done, whilst building for the future. We’re looking for people with drive and natural curiosity – who want to do things differently. And do them brilliantly. We’re looking for people who are ready for a fast paced environment, get their kicks out of problem solving and can balance getting today's stuff done, whilst building for the future. We’re looking for people with drive and natural curiosity – who want to do things differently. And do them brilliantly. You will need similar experience in a Field service technical engineering role on electrical/mechanical equipment and be proficient in the use of hand tools and diagnostic tools (multi-meter). • Proficiency in diagnosing and repairing equipment, with experience in software configuration and firmware updates., • Strong analytical and troubleshooting skills for resolving complex technical issues., • Excellent verbal and written communication skills, with the ability to provide technical training, • Ability to manage tasks efficiently, ensuring quality and meeting deadlines across multiple markets., • High accuracy in quality control and documentation updates., • Experience working with diverse teams, including international subcontractors and internal staff., • Flexibility to travel for service and training activities both in the UK and occasionally internationally., • Familiarity with parcel locker or similar systems, electromechanical devices, and organisational IT tools., • Effective time management and the ability to handle tools and components responsibly. Enhanced Annual Leave 26 Days Plus the Option to Buy Additional Days per year More time for you to relax, explore, and enjoy life. AXA Health Care Stay healthy and happy with our top-notch health coverage. Enhanced Parental Leave We support you during those precious family moments. Rail Loan Commute with ease! Purchase an annual season ticket, expense it through our InPost expenses procedure, and enjoy a more affordable interest free repayment over the year. Volunteering Days Take a paid day to make a difference in your community We pride ourselves on our candidate experience. We want to make this as straightforward as possible, for you and for us! We will try our best to get back to you within a few days to let you know if we’d like to take you to the first stage. This normally involves a 20 minute chat with our Talent Team. If we both feel the connection, you’ll then go through another one or two stages, depending on the level of the role. At InPost, we love uniqueness. Our strength is our people. We strive to create an open, equal, inclusive environment in which everyone has the opportunity to flourish and be themselves. #J-18808-Ljbffr

Samuel Frank is recruiting for a Junior Electrical Design Engineer to join an established electrical engineering business based near Chester. The company provides electrical design, manufacture and site installation services to industrial clients across sectors including nuclear, oil and gas, power generation and pharmaceuticals. The Junior Electrical Design Engineer will work alongside Lead Engineers and the Engineering Director, supporting a varied portfolio of LV electrical, building services, security and control systems projects. The role is full-time, office-based and offers structured technical development and hands-on project exposure. Key aspects of the Junior Electrical Design Engineer role include: • Producing electrical design documentation and AutoCAD drawings with guidance from experienced engineers., • Preparing block cable diagrams, single-line diagrams, containment layouts and sections, panel general arrangements and other EC&I design deliverables., • Using Amtech / Trimble ProDesign for cable calculations in accordance with BS 7671; training and development will be provided., • AutoCAD experience and familiarity with electrical drawings are required; a complete understanding of all drawing types is not essential., • An HNC/HND in Electrical Engineering and at least 12 months' relevant industry experience would be advantageous, but are not mandatory., • Knowledge of BS 7671 / 18th Edition Wiring Regulations is desirable., • Building services design experience covering lighting, fire alarms or public address systems would be beneficial., • Exposure to EC&I installation, containment, cabling or electrical distribution systems would also be useful., • Good attention to detail, clear technical communication and working knowledge of Microsoft Office are important., • The successful candidate will need to obtain security clearance for work in the civil nuclear and MOD sectors. This Junior Electrical Design Engineer opportunity would suit someone at an early stage of their electrical design career who wants to develop their skills across varied industrial projects. The employer offers internal and external training, practical mentoring and support through the IET Professional Development scheme. • £35-45k depending on experience and qualifications., • 25 days' holiday plus bank holidays., • Company pension scheme and life assurance., • IET Professional Development scheme and ongoing technical training., • Monday to Friday, 40 hours per week The Junior Electrical Design Engineer position is commutable from Chester, Deeside, Wrexham, Ellesmere Port, Mold, Flint, Birkenhead, Runcorn and surrounding areas. #J-18808-Ljbffr

Multi Skilled Maintenance Engineer Location: Chester Salary: £50,000-£55,000 + Benefits Shift Pattern: Monday to Friday - Double Days (06:00-14:00 / 14:00-22:00) Job Type: Permanent My client operates within a heavy engineering environment, offering an excellent opportunity for an experienced Multi Skilled Maintenance Engineer to join its engineering team. The business operates a complex industrial facility where equipment reliability, planned maintenance and continuous improvement are essential to maintaining safe and efficient operations. This is an opportunity to work within a technically challenging environment, supporting plant performance, equipment availability and ongoing engineering projects. As a Multi Skilled Maintenance Engineer, you will be responsible for maintaining, fault-finding and repairing a wide range of mechanical and electrical plant equipment. You will play a key role in maximising equipment reliability, minimising downtime and ensuring all maintenance activities are completed safely and efficiently. Key responsibilities will include: • Carrying out fault-finding, maintenance and repair of mechanical and electrical plant equipment., • Undertaking planned preventative maintenance (PPM) to maximise equipment reliability and availability., • Responding to equipment breakdowns, diagnosing faults and implementing effective solutions to minimise downtime., • Working in accordance with established maintenance procedures, engineering standards and best practices., • Supporting plant development, engineering projects, installation and commissioning activities where required., • Maintaining accurate maintenance records and asset information using a computerised maintenance management system (CMMS)., • Working with engineering drawings, schematics and P&IDs to diagnose faults and support maintenance activities., • Liaising with external contractors and suppliers, overseeing maintenance and repair work and ensuring safe working practices., • Supporting project commissioning activities and ensuring the appropriate engineering documentation is in place., • Assisting with outage planning, scheduling and coordination of preparatory maintenance work., • Identifying equipment defects, reporting issues and recommending improvements to enhance reliability and performance., • Supporting the management of change process by identifying and assessing proposed engineering modifications., • Working in accordance with Permit-to-Work procedures and site safety rules, including the safe supervision of contractors., • Conducting safety compliance inspections and ensuring maintenance equipment is inspected and defects are reported., • Maintaining high standards of housekeeping throughout the workshop and wider facility., • Reporting unsafe acts and conditions and assisting with incident investigations when required., • Working collaboratively with colleagues across the business to improve plant performance and operational efficiency., • Ensuring all work complies with relevant Health, Safety and Environmental legislation. To be considered for this Multi Skilled Maintenance Engineer position, you should have the following: • A recognised engineering apprenticeship or equivalent structured engineering training., • An ONC, City & Guilds, NVQ Level 3 qualification or equivalent engineering experience., • Proven experience in the maintenance and repair of a broad range of mechanical systems, including rotating equipment., • Strong mechanical and electrical fault-finding skills within an industrial or heavy engineering environment., • Practical knowledge of conveyors, chain drives, hydraulic systems and pneumatic equipment., • Experience working with Permit-to-Work systems and following safe systems of work., • The ability to interpret engineering drawings and P&IDs., • A proactive approach to preventative maintenance, breakdown reduction and continuous improvement., • Good communication skills and the ability to work effectively as part of an engineering team., • Experience supporting plant mobilisation or commissioning would be advantageous but is not essential., • Salary of £50,000-£55,000 per annum., • Private medical insurance., • 25 days' annual leave plus bank holidays., • Performance-related bonus of up to 12%, based on plant and individual performance., • Pension scheme with matched contributions of up to 5%., • Permanent employment within a technically challenging heavy engineering environment. #J-18808-Ljbffr

NTX1243726 In this crucial role, you will need to: • Champion the rights of our customers to enjoy a safe, warm and good quality home, • Be proud of the work you do, taking a proactive approach to delivering fantastic services, • Have great Health & Safety awareness, • Establish excellent working relationships with colleagues and contractors, • Be computer literate or be willing to adopt to software-based systems after training, • Have a valid UK driving license, • Have personal values and an approach that align with our We’re Muir values, • Are you an experienced electrician with a passion for delivering a high quality, efficient and effective repairs services?, • Can you complete and certify electrical works such as EICR’s EIC’s, Minor Works’s and day to day repairs including tenanted properties, working on empty homes and planned maintenance projects?, • Are you self-motivated and passionate about delivering high quality services to customers?, • Do you have a detailed and wide-ranging knowledge of domestic and commercial electrical works?, • Do you have relevant electrical qualifications BS-7671 18th Edition, C&G-2391-52 Inspection & Testing, NVQ Level 3 electrical installation & maintenance, AM2 (Achievement Measurement 2) or equivalent)? We are committed to recruiting a diverse workforce, where individual contributions are encouraged and valued. We welcome and encourage applications from all candidates regardless of age, race, sex or gender identity, religious beliefs, marital status, sexual orientation, disability or neurodiversity. Closing date: 10th November 2026 Shortlist date: 11th November 2026 Interview date: TBC #J-18808-Ljbffr

Department: Engineering Employment Type: Permanent - Full Time Location: Deeside Compensation: £51,250 / year We are looking for a Shift Engineer to join our Engineering team, providing electrical and mechanical support across our manufacturing operation. You'll be responsible for maintaining production equipment, responding to breakdowns, carrying out planned preventative maintenance, and supporting continuous improvement initiatives to maximise plant reliability and efficiency. Working closely with Production and Operations teams, you'll play a key role in minimising downtime, improving performance, and ensuring all engineering activities are carried out safely and in line with food safety and quality standards. Shift pattern: 4-on-4-off Days & Nights (6am-6pm / 6pm-6am • To carry out planned predictive and re-active maintenance of process, packaging and auxiliary equipment, • To carry out workshop duties such as machine repairs and component manufacture, • To retrain in new methodology, technology and engineering techniques as the business needs arise, • To train others in the plant, buildings and auxiliary equipment used on site, • To respond to machine & auxiliary failures, • Troubleshooting and fault finding on a range of electrical and mechanical plant equipment, packing machinery and site services., • Installation, commissioning and repair of all plant and facilities, • To assist the Manufacturing Department with line adjustments, changeovers and breakdowns, • Responsible for improvements and reduction of downtime through increased efficiencies through your own ideas and input, • To take an active role in the Health and Safety requirements on site on behalf of the Engineering Department, • To be able to work unsupervised when tasked to do so and to organise the work of others in response to the site needs, • Work alongside and support the activities of all engineering contractors when they are on site, • Produce and maintain documents relating to the administration of all engineering tasks, • The job holder is required to do all tasks considered as relevant by their line manager, • Responsible for Food Safety, Quality and Legality, • A qualified engineer, to HNC and/or NVQ Level 3 standard in an electrical, mechanical or multiskilled discipline., • Hands on, multi-skilled experience on automated machines within a continuous manufacturing environment, ideally food manufacturing, • Working experience of integrated systems., • Working experience of Automatic Packaging and Palletisation systems, • Some knowledge of AC and/or servo drive systems., • Safety-focussed, • Team worker with the ability to work under own initiative, • The use of own initiative and judgment in identifying and correcting all stoppages and breakdowns to production plant, equipment and services, • The use of own initiative with some independent action to prioritise engineering problems in the absence of the Asset Lead Engineer / Shift Manager, • Subsidised Canteen, • Subsidised Staff Shop, • Pension Scheme, • Employee Assistance Programme, • Free On-site Parking, • Recognition Scheme #J-18808-Ljbffr

Recruit Engineering is partnering with a leading engineering business to recruit an Electrical Controls Design Engineer to design electrical control systems and industrial panels for complex automation projects in South Elmsall, West Yorkshire. You will produce schematics and panel layouts, develop BOMs, perform load calculations and verification, and support manufacturing, installation and commissioning activities. #J-18808-Ljbffr

CNC Service Engineer Location: North & Midlands Salary: £35,000 - £45,000 basic DOE We are currently recruiting for an experienced CNC Service Engineer to join an established engineering business, covering customers across the North of England and Midlands. This is an excellent opportunity for a hands-on engineer with strong experience servicing and maintaining CNC lathes and milling machines, looking for a varied field-based role. T Key Responsibilities • Service, maintain and repair CNC lathes and milling machines., • Diagnose and resolve mechanical, electrical and control-related faults., • Attend customer sites across the North and Midlands., • Carry out preventative maintenance and machine servicing., • Support machine installation, commissioning and upgrades where required., • Identify faults and provide effective technical solutions., • Complete service reports and maintain accurate customer records., • Provide customers with technical advice and support., • Liaise with internal engineering and technical teams to resolve complex issues. About You • Proven experience as a CNC Service Engineer, Field Service Engineer, Maintenance Engineer or similar., • Strong hands-on experience with CNC lathes and milling machines., • Good mechanical and electrical fault-finding ability., • Experience working with CNC controls and machine tool systems., • Ability to diagnose problems methodically and work independently., • Strong customer-facing and communication skills., • Willingness to travel throughout the North and Midlands., • Full UK driving licence. What's on Offer • £35,000 - £45,000 basic salary, depending on experience., • Field-based role covering the North and Midlands., • Door to Door pay, • Varied work across a range of CNC machine tools., • Company vehicle and expenses package., • Overtime opportunities., • Full-time, permanent position., • Opportunity to develop your technical expertise within a specialist engineering environment. WR Engineering are the #1 recruitment partner for engineering, manufacturing & technical sales jobs. We recruit for permanent jobs UK wide. WR is acting as an Employment Agency in relation to this vacancy. JBRP1_UKTJ

The Opportunity Our client, an established M&E engineering specialist based in Warrington, is looking for an Electrical Design Manager to lead their electrical design function. A leadership role, not a senior designer's job with a manager's title. If what you want is to keep being the one drawing, this is the wrong move. The work is electrical design for industrial, food and drink, FMCG and pharmaceutical projects. Designing into a production environment is a different discipline from designing an office block. The installation has to survive washdown, sit correctly within a hygiene regime, and stay maintainable inside a plant that cannot be stopped for long. Those constraints shape a design from concept rather than being worked around at the end of it. This is a permanent role in Warrington, £70,000 to £80,000 depending on experience, plus a full benefits package. About the Business Designing into somebody else's working plant moves the centre of gravity of the job. The client's process is the fixed point rather than the building, and the electrical design has to serve it: panel positions that suit a maintenance regime, isolation that fits a shutdown plan, containment that survives being hosed down every night. That is why this role sits close to pre-construction and delivery instead of upstream of them, and why design input is wanted at bid stage rather than after award. Our client is an M&E engineering specialist covering mechanical, electrical, HVAC, in-house design and maintenance under one roof, working nationally from a strong North-West base. They work for recognisable UK manufacturers across industrial, food and drink, FMCG, pharmaceutical and manufacturing sectors, with a high proportion of repeat and framework work. A significant proportion of their projects take place inside live production facilities, around hygiene requirements, process constraints and shutdown windows, with planned and reactive maintenance running alongside project delivery. The business holds ISO 9001, ISO 14001 and ISO 45001. Managing designers is only half of it. The function also runs external consultants, which means holding one standard across people who do not sit in your office and have not absorbed how this business works. Setting and maintaining those standards is what makes that possible, which is why they belong to the role rather than sitting beside it as a side project. What You'll Be Doing • Leading the electrical design function and setting design standards across projects, • Managing in-house designers and Revit/CAD technicians, including allocation, reviews and development, • Appointing and managing external electrical design consultants, • Reviewing and approving electrical design output before it is issued, • Ensuring compliance with BS 7671, client specifications and the standards that apply in regulated environments, • Representing the design function to clients and project teams, • Supporting pre-construction and estimating with design input and design risk reviews, • Coordinating with mechanical design colleagues so M&E solutions are properly integrated, • Supporting delivery teams through construction, commissioning and handover, • Maintaining and developing BIM and CAD standards across the design teamWhat We're Looking For, • A strong electrical building services design background, with experience leading or approving other people's work, • Sound knowledge of BS 7671, and design experience in industrial or process environments, • Experience managing designers, external consultants, or both, • Confident and credible in front of clients, including presenting design decisions, • Working knowledge of Revit, AutoCAD, BIM coordination and electrical design software such as Amtech, • Degree, HNC or HND in Electrical or Building Services Engineering, • Full UK driving licence Food, pharmaceutical or industrial design experience is a strong advantage, and chartership or working towards it is welcomed, though neither is essential. Senior Electrical Design Engineers ready to step into management are encouraged to apply. What's on Offer • £70,000 - £80,000 depending on experience, • Leading the function (Electrical design), • Full company benefits package, • Industrial, food and pharmaceutical process work, which most electrical design careers never touch, • Technically demanding projects where a design has to work inside a live process, not only pass review, • In-house estimating and delivery alongside the design team, so design input lands early and is supported through construction JBRP1_UKTJ

Help us to make a world of difference Urenco is a global leader in the production of low carbon energy. We work at the cutting edge of the transition to a sustainable, net zero world. Help us to make a world of difference Urenco is a global leader in the production of low carbon energy. We work at the cutting edge of the transition to a sustainable, net zero world. We’re looking for a Senior Project Engineer (Acceptance & Commissioning Lead) based at our Capenhurst location you will manage specialist project requirements, ensuring timely delivery within budget, while maintaining the highest quality standards and fostering strong client relationships. At Urenco we’re committed to giving you opportunities to be your best. If you feel you meet some, but not all of what we're looking for, please still apply. We believe in embracing the passion and potential of our people, and to achieve this we offer market leading training and development experiences. Along with the opportunity to be mentored and coached by some of the smartest minds in the industry. • Lead the preparation, review, and approval of commissioning activities across projects., • Develop and manage robust Commissioning and Acceptance Plans, ensuring successful coordination of commissioning interfaces and project handover., • Plan, coordinate, and oversee commissioning activities across multiple projects and engineering disciplines., • Manage commissioning hold points, test records, observations, and reservation lists throughout the commissioning lifecycle., • Witness, review, and approve Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT), ensuring equipment and systems meet technical, quality, and operational requirements., • Attend global supplier sites to support and oversee FAT activities prior to equipment shipment., • Verify that systems, equipment, and facilities perform as intended through structured testing, validation, and acceptance processes., • Review and provide technical assurance on commissioning deliverables produced by contractors and project teams., • Provide technical support and guidance during installation, testing, commissioning, and handover activities., • Identify, assess, and resolve technical issues encountered during project delivery., • Support effective decision-making through engineering expertise and practical problem-solving., • Identify, assess, and mitigate engineering and commissioning risks to ensure project objectives are achieved safely and efficiently., • Manage the collation and completion of life-time quality records, handover certificates, and commissioning documentation., • Produce high-quality commissioning documentation, including SAT procedures, commissioning plans, and handover packs., • Support operational readiness and the successful transfer of assets to Operations and Maintenance teams., • Ensure all commissioning records and supporting documentation are completed to the required quality standards., • Support successful project closure through the completion of commissioning and acceptance activities., • Drive continuous improvement across engineering and commissioning activities by applying lessons learned and industry best practice., • Promote standardisation, efficiency, and knowledge sharing to enhance future project delivery and operational performance. To succeed as a Senior Project Engineer (Acceptance & Commissioning Lead) at Urenco, you will require: • HNC, HND or Degree in an Electrical Engineering discipline, or equivalent industry experience., • A minimum of 10 years of Project Engineering experience, demonstrating a proven track record of successful project delivery., • At least 5 years of experience working across the full design project lifecycle, including concept development, execution, and commissioning., • Experience in leading and working within multi-cultural teams across diverse project environments., • Strong leadership skills with the ability to manage multi-disciplinary teams, while working independently with minimal supervision., • Demonstrable success in overseeing projects from conception to delivery, ensuring the achievement of key objectives in terms of cost predictability and quality assurance., • Proven capability in managing complex projects, with a focus on delivering high-quality results on time and within budget. More than just a job, we offer a future. More than just a place to work, we provide an opportunity to prosper. As a valued member of our team, you will receive: • Generous Annual Leave: Starting at 25 days, increasing by one day every two years (up to 30 days), plus 13 additional flexible days. Option to buy or sell up to 5 holiday days., • Family-Friendly Policies: A wide range of policies to support work-life balance and family needs., • Bonus Scheme: A competitive bonus scheme based on company and individual performance., • Pension Scheme: Defined contribution plan with up to 16% employer contribution., • Private Medical & Dental Cover: Single cover, with the option to purchase additional benefits., • Flexible Benefits: Life assurance, income protection, and benefits tailored to your lifestyle., • Training & Development: Personalised learning and development opportunities to support your career growth. Due to the nature of the industry in which Urenco operates, successful candidates will be required to obtain and maintain the appropriate level of security clearance for the role. All offers of employment are subject to satisfactory completion of the required vetting and screening checks. As a truly global organisation with operations in the UK, USA, Germany, and the Netherlands, we know that our differences make us stronger. We are committed to creating an inclusive workplace where everyone feels valued, respected, and empowered to succeed. If you require any reasonable adjustments during the recruitment process, please let our Talent Acquisition team know. Because together, we are One Urenco. We are enriching the world. And enriching your future. #J-18808-Ljbffr

Location: Hawarden, Flintshire Rate: Competitive, dependent on experience Working Hours: Monday to Friday, 40 hours per week Contract Type: Contract Working Arrangement: Office-based Our client is an established Electrical Engineering Solutions provider with over 35 years of industry experience. They deliver electrical engineering design, manufacturing and site installation services to a diverse portfolio of blue-chip clients across the oil and gas, nuclear, power generation and pharmaceutical sectors. Due to continued growth and an expanding project portfolio, they are looking to engage a CAD Draughtsman on a contract basis to support their engineering team. Working alongside experienced Lead Engineers and the wider engineering department, you will assist with the production and modification of technical drawings and design documentation for a range of electrical, control and instrumentation projects. As a Contract CAD Draughtsman, you will support the engineering team in producing accurate technical drawings using AutoCAD. You will work closely with Lead Engineers to ensure drawings meet project specifications, design requirements and quality standards. Key Responsibilities: Produce, update and maintain engineering drawings using AutoCAD. Prepare electrical and EC&I design drawings, including: Cable containment layouts and section drawings. Electrical panel general arrangement drawings. Electrical distribution and installation drawings. General electrical, control and instrumentation deliverables. Interpret engineering sketches, specifications and technical information to produce accurate drawings. Incorporate design changes and update drawings in line with engineering comments and project requirements. Work closely with Lead Engineers to ensure drawings accurately reflect the design intent. Maintain drawing accuracy, consistency and compliance with project standards. Follow established quality assurance procedures and document control processes. Liaise with internal engineering teams and, where required, external customers and suppliers to clarify technical requirements. Manage drawing deliverables to meet agreed project deadlines. Maintain a high level of attention to detail across all design documentation. Our client is seeking a CAD Draughtsman with strong AutoCAD skills and experience producing technical drawings within an engineering environment. Experience in electrical engineering, building services or EC&I projects would be particularly beneficial. Desirable Skills and Experience: Previous experience as a CAD Draughtsman, CAD Technician or Electrical Draughtsman. Proficiency in AutoCAD and the production of technical engineering drawings. Familiarity with electrical schematics, layouts and installation drawings. An understanding of cable containment, cabling and electrical distribution systems. Experience supporting EC&I or electrical engineering projects. Exposure to building services drawings, including lighting, fire alarm and public address systems. Ability to interpret engineering specifications, sketches and technical information. Strong attention to detail and the ability to work to project deadlines. A proactive approach and the ability to work effectively alongside engineers and other project stakeholders. A relevant CAD or engineering qualification would be advantageous, although practical experience and technical capability are the key priorities. Contract opportunity supporting an established engineering organisation. Based full-time at the client's offices in Hawarden, Flintshire. 40 hours per week, Monday to Friday. Competitive contract rate, dependent on experience. Opportunity to contribute to projects across the nuclear, defence, oil and gas, power generation and pharmaceutical sectors. The successful candidate will be required to obtain the appropriate security clearance to support projects within the civil nuclear and Ministry of Defence sectors. #J-18808-Ljbffr

As a leading provider of high-performance compressed air systems, Ingersoll Rand provides a wide range of products and services that deliver long-term energy efficient solutions from generation to point of use. We offer turnkey solutions and manage the design, specification, and installation of compressed air systems. Compressed Air Systems Technician Northwest As a leading provider of high-performance compressed air systems, Ingersoll Rand provides a wide range of products and services that deliver long-term energy efficient solutions from generation to point of use. We offer turnkey solutions and manage the design, specification, and installation of compressed air systems. Due to continued growth, we have vacancies for Professional Service Technicians at United Air Power/Ingersoll Rand to undertake maintenance work on our UK customer’s compressed air systems, including Air Compressors, Air Treatment, Control Systems, Refrigeration (FGAS) & Nitrogen Generation. • Perform maintenance and installation work on compressed air systems., • Diagnose and repair faults in air compressors and related equipment., • Ensure compliance with health and safety regulations., • Maintain accurate records of work performed., • Collaborate with other team members to ensure efficient service delivery., • Provide technical support to customers., • Conduct routine inspections and preventive maintenance., • Level 3 in a mechanical/electrical engineering discipline is preferred but not essential., • Full UK Driving licence, • Computer literate Fully site based with travel between various branches within the Ingersoll Rand Group. • Experience in maintaining compressed air systems is essential. Applications are invited from Compressed Air Technicians with a minimum of 5 years of experience but applicants with less experience will be considered, • Familiarity with industry standards and best practices in compressed air systems., • Ability to work independently and as part of a team to achieve project goals., • Commitment to continuous improvement and professional development., • Strong attention to detail and the ability to perform work to high standards of quality, • 25 days Holiday + 8 Bank Holidays, • Holiday Purchase Scheme – additional 5 days annual leave, • 5% Employee and 7% Employer Pension Contribution, • Company Van – with optional personal usage, • Westfield Health Cashback Plan, • Death in Service Benefit of 4x salary, • Ownership Works equity program: we believe in the power of employee ownership. All full-time permanent employees are eligible for a one-time stock award after successfully completing one year of employment, • Employee assisting program, • Enhanced maternity and paternity policies, • LinkedIn Learning – full free access, • Electric Car Scheme (after successfully completing one year of employment), • Cycle scheme (after successfully completing probation period) #J-18808-Ljbffr

Department: Engineering Employment Type: Permanent - Full Time Location: Deeside Compensation: £51,250 / year We are looking for a Shift Engineer to join our Engineering team, providing electrical and mechanical support across our manufacturing operation. You'll be responsible for maintaining production equipment, responding to breakdowns, carrying out planned preventative maintenance, and supporting continuous improvement initiatives to maximise plant reliability and efficiency. Working closely with Production and Operations teams, you'll play a key role in minimising downtime, improving performance, and ensuring all engineering activities are carried out safely and in line with food safety and quality standards. Shift pattern: 4-on-4-off Days & Nights (6am-6pm / 6pm-6am • To carry out planned predictive and re-active maintenance of process, packaging and auxiliary equipment, • To carry out workshop duties such as machine repairs and component manufacture, • To retrain in new methodology, technology and engineering techniques as the business needs arise, • To train others in the plant, buildings and auxiliary equipment used on site, • To respond to machine & auxiliary failures, • Troubleshooting and fault finding on a range of electrical and mechanical plant equipment, packing machinery and site services., • Installation, commissioning and repair of all plant and facilities, • To assist the Manufacturing Department with line adjustments, changeovers and breakdowns, • Responsible for improvements and reduction of downtime through increased efficiencies through your own ideas and input, • To take an active role in the Health and Safety requirements on site on behalf of the Engineering Department, • To be able to work unsupervised when tasked to do so and to organise the work of others in response to the site needs, • Work alongside and support the activities of all engineering contractors when they are on site, • Produce and maintain documents relating to the administration of all engineering tasks, • The job holder is required to do all tasks considered as relevant by their line manager, • Responsible for Food Safety, Quality and Legality, • A qualified engineer, to HNC and/or NVQ Level 3 standard in an electrical, mechanical or multiskilled discipline., • Hands on, multi-skilled experience on automated machines within a continuous manufacturing environment, ideally food manufacturing, • Working experience of integrated systems., • Working experience of Automatic Packaging and Palletisation systems, • Some knowledge of AC and/or servo drive systems., • Safety-focussed, • Team worker with the ability to work under own initiative, • The use of own initiative and judgment in identifying and correcting all stoppages and breakdowns to production plant, equipment and services, • The use of own initiative with some independent action to prioritise engineering problems in the absence of the Asset Lead Engineer / Shift Manager, • Subsidised Canteen, • Subsidised Staff Shop, • Pension Scheme, • Employee Assistance Programme, • Free On-site Parking, • Recognition Scheme #J-18808-Ljbffr

Samuel Frank is recruiting for a Junior Electrical Design Engineer to join an near-Chester based electrical engineering business offering design, manufacture and site installation services to industrial clients. You will work alongside Lead Engineers and the Engineering Director, supporting LV elect

The successful candidate will be responsible for ensuring all electrical works are carried out safely, on time, and in compliance with project specifications, industry standards, and regulatory requirements.Supervise and coordinate electrical installation activities on-site, ensuring work is complet

Location: Chester Our client is a well-established and rapidly growing renewable energy business with a strong reputation across the renewable sector, including Solar PV and Heat Pump installations. Due to continued growth and increasing demand, they have recently launched a dedicated Air Conditioning division and are looking to appoint an experienced Air Conditioning Engineer to help drive its development. This is an exciting opportunity for an ambitious engineer who wants more than just another service role. The successful candidate will play a key part in shaping and growing the company's Air Conditioning offering, with the opportunity to build and lead a dedicated team in the future. • Surveying and assessing new Air Conditioning projects, primarily domestic split-system installations., • Installing Air Conditioning systems alongside the company's in-house electrical team., • Carrying out post-installation inspections and ensuring all work meets industry standards and company expectations., • Diagnosing faults and carrying out repairs on Air Conditioning systems., • Undertaking F-Gas related work across a portfolio of over 2,000 installed heat pump systems., • Supporting the development and growth of the Air Conditioning division., • £40k-£50k Salary - negotiable depending on experience., • Company vehicle and fuel card., • Company uniform., • 25 days leave plus bank holidays., • Company pension scheme., • Private healthcare and Dental, • Clear progression opportunities into management., • Valid F-Gas Certification (Cat 1), • Proven experience installing, servicing, and fault-finding Air Conditioning systems, • Full UK driving licence, • Commutable to Chester / South Cheshire or Shropshire #J-18808-Ljbffr

Hours:40 hours, Monday - Friday and 1 in 4 Saturdays We are looking for a skilled Electrical Maintenance Engineer to maintain and improve plant equipment, ensuring maximum uptime and efficiency. You’ll carry out planned preventative maintenance (PPM), respond to breakdowns, and support continuous improvement in a fast-paced manufacturing environment. • Perform electrical maintenance and fault finding safely, • Respond to breakdowns to minimise downtime, • Work with PLCs, drives, motors, sensors, and control panels, • Complete PPM tasks and maintain accurate records, • Support installation and commissioning of equipment, • Identify and implement reliability improvements, • Time-served Electrical Apprentice, • Experience in manufacturing or industrial environments, • Ability to read electrical schematics, • Proactive, team-focused, and safety-conscious, • Supportive and collaborative engineering team, • Hands-on role with varied equipment, • Opportunity to improve plant performance, • Ongoing training and development BSW Group is the largest timber and forestry business in the UK, with operating divisions spanning the whole supply chain, from tree nurseries and woodland management to sawmilling and pallets. We market 35 million saplings annually through the country’s leading commercial tree nursery, have planted a billion trees through Tilhill Forestry, supply sustainable timber products to an array of industries as BSW Timber, and manufacture millions of pallets a year as Scott Pallets. We work to keep industry moving and aim to be the most technically advanced timber business in the country. BSW operates as a collection of experts – an interconnected circle, where everyone and everything works together, allowing the business to constantly innovate as our people thrive. With an ethos to use everything and waste nothing, we leverage technology and cutting-edge practices to supply the diverse demands of the UK, helping to build sustainable worlds. • Employee Discount Hub, • Refer-a-friend, • Free fruit provided on site #J-18808-Ljbffr

Salary: £42,000 Location: Chester Hours: Monday to Friday, 8:00am-5:00pm Contract: Permanent We are recruiting for an experienced Commercial Air Conditioning Engineer / HVAC Engineer to join an established and growing Facilities Management and Building Services business. You’ll be responsible for planned preventative maintenance (PPM), reactive maintenance, servicing, repairs and fault finding across a varied portfolio of commercial sites. This is a permanent opportunity for an experienced Air Conditioning Engineer looking for a stable role with a strong benefits package, company vehicle and opportunities for ongoing training and career development. Carry out PPM and reactive maintenance on commercial air conditioning and HVAC systems. Diagnose faults and complete effective repairs. Service and maintain commercial air conditioning equipment. Complete minor installation, replacement and remedial works. Carry out electrical and mechanical fault finding. Complete service reports and job records using digital systems. Ensure all work is completed in line with F-Gas and Health & Safety requirements. Identify additional remedial works where appropriate. Provide a professional service to customers and clients. Manage your own workload and work independently across customer sites. Previous experience as a Commercial Air Conditioning Engineer, AC Engineer or HVAC Engineer. Strong experience in PPM and reactive maintenance. Confident carrying out fault finding, diagnostics and repairs. Good knowledge of commercial air conditioning systems. Strong customer service and communication skills. Able to work independently and manage your own workload. Full UK Driving Licence. F-Gas Category 1 qualification. NVQ Level 2 or 3 in Air Conditioning & Refrigeration. City & Guilds Air Conditioning & Refrigeration. Commercial refrigeration experience. IPAF / PASMA. CSCS / relevant industry card. 18th Edition. £42,000 salary Monday-Friday, 8am-5pm Company van with private use Fuel card Overtime available TOIL 25 days' holiday + bank holidays Annual salary reviews Company performance bonus Private healthcare Critical illness cover Life assurance Employee Assistance Programme 5% employee / 3% employer pension contribution Ongoing training and career development Referral scheme Weekly expenses Paid parking #J-18808-Ljbffr

Chester Area 6-Month Contract 50 Hours Per Week Available Are you an experienced Electrical Project Engineer with a strong understanding of Building Management Systems (BMS)? We're supporting a major electrical installation project near Chester and are looking for a hands‑on Project Engineer who can successfully bridge the gap between design and site delivery. This is an excellent opportunity to join a high‑profile project, leading site activities and ensuring installations are delivered safely, efficiently, and to specification. • Leading and coordinating a team of approximately 20 electricians on site, • Reviewing electrical and BMS drawings, specifications and technical documentation, • Turning design information into practical installation activities, • Managing daily electrical installation works with supervisors and subcontractors, • Ensuring quality, safety and programme objectives are achieved, • Attending site progress meetings and providing technical support, • Liaising with commissioning teams, clients and key project stakeholders, • Resolving technical issues and managing project documentation, • Previous experience as an Electrical Project Engineer on commercial, industrial or critical infrastructure projects, • Strong knowledge of Building Management Systems (BMS), • Ability to interpret electrical drawings and schematics, • Experience driving site-based project delivery and installation activities, • Proven ability to manage and coordinate electrical labour on site, • Strong communication and stakeholder management skills, • SSSTS or SMSTS preferred, • £1,800 per week opportunity, • 50 hours available each week, • Immediate contract opportunity, • Major electrical installation project, • 6-month duration with potential for extension #J-18808-Ljbffr

Select how often (in days) to receive an alert: As a leading provider of high-performance compressed air systems , Ingersoll Rand provides a wide range of products and services that deliver long-term energy efficient solutions from generation to point of use. We offer turnkey solutions and manage the design, specification, and installation of compressed air systems. Due to continued growth, we have vacancies for Professional Service Technicians at United Air Power/Ingersoll Rand to undertake maintenance work on our UK customer’s compressed air systems, including Air Compressors, Air Treatment, Control Systems, Refrigeration (FGAS) & Nitrogen Generation. • Perform maintenance and installation work on compressed air systems., • Diagnose and repair faults in air compressors and related equipment., • Ensure compliance with health and safety regulations., • Maintain accurate records of work performed., • Collaborate with other team members to ensure efficient service delivery., • Provide technical support to customers., • Conduct routine inspections and preventive maintenance., • Level 3 in a mechanical/electrical engineering discipline is preferred but not essential., • Full UK Driving licence Fully site based with travel between various branches within the Ingersoll Rand Group. • Experience in maintaining compressed air systems is essential. Applications are invited from Compressed Air Technicians with a minimum of 5 years of experience but applicants with less experience will be considered, • Familiarity with industry standards and best practices in compressed air systems., • Ability to work independently and as part of a team to achieve project goals., • Commitment to continuous improvement and professional development., • Strong attention to detail and the ability to perform work to high standards of quality, • 25 days Holiday + 8 Bank Holidays, • Holiday Purchase Scheme – additional 5 days annual leave, • 5% Employee and 7% Employer Pension Contribution, • Company Van – with optional personal usage, • Westfield Health Cashback Plan, • Death in Service Benefit of 4x salary, • Ownership Works equity program: we believe in the power of employee ownership. All full-time permanent employees are eligible for a one-time stock award after successfully completing one year of employment, • Employee assisting program, • Enhanced maternity and paternity policies, • LinkedIn Learning – full free access, • Electric Car Scheme (after successfully completing one year of employment), • Cycle scheme (after successfully completing probation period) If you are a person with a disability and need assistance applying for a job, please submit a request. We think and act like owners. We are committed to making our customers successful. We are bold in our aspirations while moving forward with humility and integrity. We foster inspired teams. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or the recruiting process, please send a request and a member of our team will contact you. #J-18808-Ljbffr

Do you enjoy being close to the action, solving technical problems and seeing electrical engineering projects through from design and installation to testing and commissioning? Looking to work across major UK water infrastructure projects where you'll combine your technical knowledge with hands‑on site delivery? CHG Electrical is entering an exciting period of growth, with major frameworks secured across AMP8 and AMP9. We're looking for a proactive, technically capable Field Electrical Project Engineer to support the delivery of electrical engineering works across our growing portfolio of water and wastewater infrastructure projects. This isn't simply a design role, and it isn't a traditional Project Manager position. You'll sit at the heart of engineering delivery, working between the office, project teams and live sites to ensure electrical systems are installed, tested and commissioned safely, correctly and to specification. Sheffield - Hybrid + UK-Wide Site Travel Full Time | Permanent • Car Allowance / Van + Performance Bonus, • 25 Days Holiday + Bank Holidays Water | Wastewater | Utilities | AMP8 | AMP9 Electrical | EICA | Installation | Commissioning LV Systems | MCCs | ICA | Pumping Stations | Treatment Works WIMES | BS 7671 | RAMS | HSE Full UK Driving Licence Founded in Sheffield in 2004, CHG Electrical has more than two decades of engineering heritage. Built on strong electrical engineering foundations, the business has evolved into a multidisciplinary engineering partner delivering complex projects across water utilities, rail, steel and manufacturing. Today, our capabilities span EICA, EICAT, civil engineering, control-panel design and manufacture, automation, software and digital transformation. We support projects from initial design through installation and commissioning to long-term maintenance. With major frameworks secured across AMP8 and AMP9, we’re now entering a significant period of project delivery and technical growth. You'll work closely with Project Managers, Engineers, subcontractors, site teams and clients to support electrical delivery across water and wastewater infrastructure projects. It's a varied role that takes you across the full engineering lifecycle. You'll review electrical designs and specifications, prepare and review RAMS, coordinate installation activities, support procurement and work alongside site teams to resolve technical issues. You'll then remain involved through testing, fault finding, commissioning and successful project handover. One day you might be reviewing drawings or coordinating equipment requirements in Sheffield. The next, you could be on a live water site working with subcontractors to resolve an installation or commissioning issue. If you like seeing engineering make it off the drawing and into the real world, you'll feel at home here. • Review electrical designs, specifications and drawings against project and client requirements., • Ensure electrical works comply with WIMES, BS 7671, client specifications and relevant industry standards., • Participate in design reviews, constructability assessments and multidisciplinary engineering meetings., • Identify technical issues and help develop practical solutions that protect quality and programme., • Work closely with Project Managers and engineering teams throughout delivery., • Coordinate electrical installation activities across water and utilities infrastructure sites., • Work closely with site teams and subcontractors to ensure works are delivered safely and to specification., • Prepare and review Risk Assessments and Method Statements (RAMS) ahead of site activities., • Monitor progress and proactively identify installation or technical challenges., • Support the procurement and purchasing of electrical equipment, materials and subcontract services., • Support electrical testing, fault finding, commissioning and system verification., • Help ensure electrical installations perform correctly before final handover., • Maintain accurate engineering and project documentation., • Support completion, handover and close-out activities. You'll already have practical electrical engineering experience gained within water, utilities or industrial infrastructure. You'll understand that good engineering doesn't stop with the drawing. You'll be comfortable getting onto site, working alongside installation teams and subcontractors, interpreting technical information and helping solve the practical problems that arise when engineering designs become physical systems. Experience within water and wastewater infrastructure would be particularly valuable, including environments such as pumping stations, treatment works and process plant. • Proven electrical engineering or electrical project delivery experience within water, utilities or industrial infrastructure., • Practical experience supporting electrical installation and commissioning activities., • Knowledge of electrical systems associated with pumping stations, treatment works and/or industrial plant., • Experience working with electrical systems such as LV, MCCs and ICA equipment., • Ability to interpret electrical designs, specifications and drawings., • Understanding of WIMES, BS 7671 and relevant regulatory requirements., • Experience preparing or reviewing RAMS and coordinating safe site activities., • Confidence working with site teams and subcontractors., • Strong technical problem-solving and fault-finding capability., • Confidence working across both office and live site environments., • Strong communication and multidisciplinary team-working skills., • Full UK driving licence. This is an opportunity to join CHG Electrical at an exciting point in our growth. With significant AMP8 and AMP9 work ahead, you'll gain exposure across major UK water infrastructure projects while developing your expertise across electrical engineering, installation, site delivery and commissioning. Rather than being confined to one part of the engineering lifecycle, you'll get to see projects develop from design through to working systems on site. • Car allowance / van., • Performance-based bonus scheme., • Hybrid and flexible working., • Structured professional development and training., • Long-term career progression within a growing engineering business. If you're an electrically biased engineering professional who understands EICA project delivery and enjoys combining technical engineering with practical site delivery, we'd love to hear from you. #J-18808-Ljbffr

Help us to make a world of difference Urenco is a global leader in the production of low carbon energy. We work at the cutting edge of the transition to a sustainable, net zero world. We’re looking for a Senior Project Engineer (Acceptance & Commissioning Lead) based at our Capenhurst location you will manage specialist project requirements, ensuring timely delivery within budget, while maintaining the highest quality standards and fostering strong client relationships. At Urenco we’re committed to giving you opportunities to be your best. If you feel you meet some, but not all of what we’re looking for, please still apply. We believe in embracing the passion and potential of our people, and to achieve this we offer market leading training and development experiences. Along with the opportunity to be mentored and coached by some of the smartest minds in the industry. • Lead the preparation, review, and approval of commissioning activities across projects., • Develop and manage robust Commissioning and Acceptance Plans, ensuring successful coordination of commissioning interfaces and project handover., • Plan, coordinate, and oversee commissioning activities across multiple projects and engineering disciplines., • Manage commissioning hold points, test records, observations, and reservation lists throughout the commissioning lifecycle., • Witness, review, and approve Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT), ensuring equipment and systems meet technical, quality, and operational requirements., • Attend global supplier sites to support and oversee FAT activities prior to equipment shipment., • Verify that systems, equipment, and facilities perform as intended through structured testing, validation, and acceptance processes., • Review and provide technical assurance on commissioning deliverables produced by contractors and project teams., • Provide technical support and guidance during installation, testing, commissioning, and handover activities., • Identify, assess, and resolve technical issues encountered during project delivery., • Support effective decision-making through engineering expertise and practical problem-solving., • Identify, assess, and mitigate engineering and commissioning risks to ensure project objectives are achieved safely and efficiently., • Manage the collation and completion of life-time quality records, handover certificates, and commissioning documentation., • Produce high-quality commissioning documentation, including SAT procedures, commissioning plans, and handover packs., • Support operational readiness and the successful transfer of assets to Operations and Maintenance teams., • Ensure all commissioning records and supporting documentation are completed to the required quality standards., • Support successful project closure through the completion of commissioning and acceptance activities., • Drive continuous improvement across engineering and commissioning activities by applying lessons learned and industry best practice., • Promote standardisation, efficiency, and knowledge sharing to enhance future project delivery and operational performance. To succeed as a Senior Project Engineer (Acceptance & Commissioning Lead) at Urenco, you will require: • HNC, HND or Degree in an Electrical Engineering discipline, or equivalent industry experience., • A minimum of 10 years of Project Engineering experience, demonstrating a proven track record of successful project delivery., • At least 5 years of experience working across the full design project lifecycle, including concept development, execution, and commissioning., • Experience in leading and working within multi-cultural teams across diverse project environments., • Strong leadership skills with the ability to manage multi-disciplinary teams, while working independently with minimal supervision., • Demonstrable success in overseeing projects from conception to delivery, ensuring the achievement of key objectives in terms of cost predictability and quality assurance., • Proven capability in managing complex projects, with a focus on delivering high-quality results on time and within budget. More than just a job, we offer a future. More than just a place to work, we provide an opportunity to prosper. As a valued member of our team, you will receive: • Generous Annual Leave: Starting at 25 days, increasing by one day every two years (up to 30 days), plus 13 additional flexible days. Option to buy or sell up to 5 holiday days., • Family-Friendly Policies: A wide range of policies to support work-life balance and family needs., • Bonus Scheme: A competitive bonus scheme based on company and individual performance., • Pension Scheme: Defined contribution plan with up to 16% employer contribution., • Private Medical & Dental Cover: Single cover, with the option to purchase additional benefits., • Flexible Benefits: Life assurance, income protection, and benefits tailored to your lifestyle., • Training & Development: Personalised learning and development opportunities to support your career growth. Due to the nature of the industry in which Urenco operates, successful candidates will be required to obtain and maintain the appropriate level of security clearance for the role. All offers of employment are subject to satisfactory completion of the required vetting and screening checks. As a truly global organisation with operations in the UK, USA, Germany, and the Netherlands, we know that our differences make us stronger. We are committed to creating an inclusive workplace where everyone feels valued, respected, and empowered to succeed. If you require any reasonable adjustments during the recruitment process, please let our Talent Acquisition team know. Because together, we are One Urenco. We are enriching the world. And enriching your future. #J-18808-Ljbffr

Field Service Engineer with International Travel I'm looking for a driven and versatile Service Technician / Engineer to join the team of a leading industry manufacturer - providing expert installation, maintenance, and repair of advanced capital equipment across global locations. This is a unique opportunity for a technically skilled individual who thrives in diverse environments and is eager to take their career to the next level. About the Role You will be responsible for: Installing and commissioning complex capital equipment at client sites nationwide. Performing preventative maintenance, diagnostics, and repairs. Providing hands-on technical support and training to customers. Identifying and resolving mechanical, electrical, and electronic issues. Ensuring high standards of customer service and operational efficiency. Accurately documenting service activities and maintaining reports. Collaborating with engineering and technical teams to support product improvements. What We're Looking For A strong background in electrical, electronic, and mechanical systems. Previous experience in capital equipment service or similar field-based engineering roles. Excellent troubleshooting skills and a proactive approach to problem-solving. Willingness to travel internationally, often at short notice. High level of self-motivation and the ability to work independently. Strong communication skills and a professional attitude. A genuine enthusiasm for learning and adapting to new technologies. Why Apply? Exciting international travel opportunities. Supportive, innovative team environment. Competitive, negotiable salary based on your experience and potential. Ongoing development and training to keep your skills at the forefront. If you're passionate about engineering, thrive in dynamic environments, and are ready for a career with global reach-we want to hear from you. WR Engineering are the #1 recruitment partner for engineering, manufacturing & technical sales jobs. We recruit for permanent jobs UK wide. WR is acting as an Employment Agency in relation to this vacancy. JBRP1_UKTJ

Complete minor electrical installation works, inspections and routine maintenance.

A leading engineering resources firm in the UK is seeking an experienced Electrical Supervisor for a new-build industrial project in Ellesmere Port. The successful candidate will oversee electrical installation activities to ensure they are completed safely and to a high standard. Candidates should

Auto Electrician needed for a mobile role involving installation, PPM, and reactive maintenance of electrical systems in vehicles.