Trabajos electrical installation en OxfordCrear alertas

What you will be working on: Servicing and Maintaining Security Systems • Perform regular servicing, maintenance, and fault diagnosis on CCTV, intruder alarms, and access control systems., • Repair or replace faulty components to restore functionality., • Ensure all systems meet relevant standards and regulations., • Provide emergency fault response as part of an on-call rota., • Ensuring a Safe Working Environment, • Follow safety protocols, especially when working alone., • Identify and mitigate potential hazards, using PPE and adhering to safety guidelines., • Consistently follow RAMS to ensure safe, efficient task execution., • Read and interpret electrical and building plans., • Use hand tools, power tools, and specialist equipment for installation and maintenance., • Apply electrical knowledge to troubleshoot and install systems effectively., • Hold or be able to obtain ECS/CSCS certification., • Respond to out-of-hours service calls and emergencies as required., • Work flexibly, including evenings, weekends, and overnight stays., • Be physically capable of safe onsite work in various environments., • Willing to travel to customer sites and stay overnight to carry out servicing and repairs.

KM Recruitment is a specialist UK wide recruiter for the Skills and Employability sectors.Job Title: Electrical Tutor / Assessor (Trainee or Qualified)Location: Oxfordshire - Site/Field based (Must be flexible with travel) Salary: £40,000 - £50,000 (Depending on skills and experience)Package: Excellent Holiday Entitlement, Pension + Much More!Type: Full-time, PermanentUnqualified Assessors will undergo training and support to complete an Assessor QualificationEssential Criteria: • Must be a qualified Electrician, holding a minimum of a Level 3 (Domestic)., • Must hold a minimum of 5 years' experience as an Electrician., • Confident and professional with the ability to inspire and motivate people., • Excellent communication skills., • Full, clean UK driving licence and access to own vehicle.Duties include:, • Deliver Electrical Installation/Maintenance Apprenticeships at Level 3, and relevant short courses, across practical and theoretical competencies., • Assist with the development and implementation of learning resources., • Organise and maintain documentation on learners' progress., • Overcome barriers to learning and adapt delivery to meet learner’s needs., • Supporting learners to ensure they are fully prepared for End Point Assessment.Please note:KM Recruitment receive a high number of applications for each role advertised and although we would like to we are not always able to deliver feedback to unsuccessful candidates. If you have not been contacted within 4 days then unfortunately your application has been unsuccessful. Thank you for your interest and keep an eye on our website for future opportunities.

What you will be working on: Servicing and Maintaining Security Systems • Perform regular servicing, maintenance, and fault diagnosis on CCTV, intruder alarms, and access control systems., • Repair or replace faulty components to restore functionality., • Ensure all systems meet relevant standards and regulations., • Provide emergency fault response as part of an on-call rota., • Ensuring a Safe Working Environment, • Follow safety protocols, especially when working alone., • Identify and mitigate potential hazards, using PPE and adhering to safety guidelines., • Consistently follow RAMS to ensure safe, efficient task execution., • Read and interpret electrical and building plans., • Use hand tools, power tools, and specialist equipment for installation and maintenance., • Apply electrical knowledge to troubleshoot and install systems effectively., • Hold or be able to obtain ECS/CSCS certification., • Respond to out-of-hours service calls and emergencies as required., • Work flexibly, including evenings, weekends, and overnight stays., • Be physically capable of safe onsite work in various environments., • Willing to travel to customer sites and stay overnight to carry out servicing and repairs.

KM Recruitment is a specialist UK wide recruiter for the Skills & Employability sectors.We would like to speak with experienced Electricians, who are looking for an opportunity to train the next generation and come away from the tools. • NO site work - great opportunity to come 'off the tools', • NO weekends, • Stable, full time permanent employmentStarting salary: £40,000 - progressing up to £50,000Location: Oxfordshire - Centre/Field based (Must be flexible with travel) Benefits also include:, • A generous benefits package, excellent holiday entitlement and more!, • Full training and support to achieve a recognised Assessor qualification., • Ongoing training and development.What do you need?, • You must be qualified Electrician, holding a minimum of a Level 3 (Domestic.), • Must hold a minimum of 5 years' experience as an Electrician., • You must be confident and professional with the ability to inspire and motivate people., • Must be IT literate., • Full, clean UK driving licence and access to own vehicle.Duties:, • Deliver Electrical Installation/Maintenance Apprenticeships at Level 3, and relevant short courses, across practical and theoretical competencies., • Assist with the development and implementation of learning resources., • Organise and maintain documentation on learners' progress., • Overcome barriers to learning and adapt delivery to meet learner’s needs., • Supporting learners to ensure they are fully prepared for End Point Assessment.Please note:KM Recruitment receive a high number of applications for each role advertised and although we would like to we are not always able to deliver feedback to unsuccessful candidates. If you have not been contacted within 4 days then unfortunately your application has been unsuccessful. Thank you for your interest and keep an eye on our website for future opportunities.

The Vacancy ASHP Engineer – Renewables - Liberty Oxford Company Vehicle Provided Make a Real Difference in Energy Transition Join our growing Energy Transition team and help improve lives by delivering high-quality renewable installations in customer homes. As an ASHP Engineer, you’ll install air source heat pumps, cylinders, carry out general plumbing tasks, and ensure all certification and evidence is submitted on time. This is your opportunity to be part of a team creating greener, safer, smarter homes across the UK. What You’ll Be Doing People Focused You’ll help create a great customer and colleague experience by: • Encouraging strong communication between clients, office teams and engineers, • Supporting a positive team culture and leading by example, • Keeping customers informed, reassured, and updated throughout your works Simply Innovative You’ll bring smart thinking to your day by: • Planning and requesting materials in advance, • Using measuring equipment accurately, • Working from diagrams, sketches, written and verbal instructions What You’ll Bring Qualifications (Essential unless stated) • NVQ L2/L3 Domestic Plumbing or City & Guilds equivalent, • Level 3 Award: Installation & Maintenance of Heat Pump Systems (C&G, BPEC or LCL), • Water Regulations, • G3 Unvented Cylinders, • Desirable: Solar RFQ L3, F-Gas, • Clean driving licence, • Electrical qualifications (17th/18th Edition, control re-wiring) desirable Experience & Knowledge • Experience within local authority/social housing environments, • Knowledge of domestic installations and appliances, • Familiarity with PAS 2030 standards, • Technical competence in fault-finding and rectification, • Good understanding of heating systems and controls (BMS desirable), • Understanding of H&S and best practice, • Ability to work with domestic & commercial pipework, including press systems Our Commitment to You We’re an inclusive employer and will make reasonable adjustments to support employees with disabilities. We’re committed to ensuring you feel safe, respected, and supported at work. How to apply Ready to take the next step? Apply today and help us deliver a safe, efficient and customer-first repairs service. Work for Wates Wates is one of the UK’s leading family-owned development, building and property maintenance companies. Founded over 125 years ago, we have a proud legacy in the built environment. We are driven by our purpose, ‘reimagining places for people to thrive’ and our three promises: Thriving places – working with customers, partners and communities to create places that are more sustainable, inclusive, and full of opportunity. Thriving planet – protecting nature and taking action on climate change by collaborating and innovating with our partners. Thriving people – creating opportunities and relationships so that everyone who works for and with us feels included, invested in, and treated with care. We are proud to be recognised as Gold Investors in People and as a Disability Confident employer. We also ensure that our recruitment processes do not treat anyone less favourably due to an offending background.

Electrically Biased Building Services Engineer Mobile Role – Occasional travel to Cambridgeshire We are looking for an experienced Electrically Biased Building Services Engineer to join our multidisciplined Reactive and PPM team. This is a mobile role supporting a range of client sites, delivering both planned preventative maintenance (PPM) and reactive services. You will play a key role in ensuring the safe, compliant, and efficient operation of electrical and building services equipment across multiple contracts. Key Responsibilities • Carry out planned preventative maintenance (PPM) on electrical and building services systems, • Respond promptly to reactive maintenance issues and helpdesk requests, • Perform electrical fault finding, diagnosis, and repairs, • Undertake electrical installations, including testing and certification, • Complete all test and inspection certificates in line with client requirements, • Maintain accurate records using the CAFM system, • Ensure compliance with health & safety standards and regulations, • Liaise with managers, supervisors, and subcontractors to ensure smooth delivery of works, • Support wider team activities and complete ad hoc tasks as required What We’re Looking For Essential Qualifications & Experience • City & Guilds 2360 Parts 1 & 2 (Electrical Installation), • City & Guilds 2391 (Inspection, Testing & Certification), • City & Guilds Level 3 (2330 / 2360 or equivalent), • 18th Edition BS7671 Wiring Regulations, • Minimum 3 years’ experience in an industrial or commercial environment, • Strong understanding of building services maintenance and fault diagnosis, • Knowledge of health & safety practices within a building environment, • Excellent communication and organisational skills, • Ability to work independently and manage workload effectively, • Flexible approach to working hours Desirable Skills • Experience using CAFM systems, • Knowledge of UPS systems, • Experience with high voltage switching, • Basic mechanical knowledge, • Previous supervisory experience What You’ll Bring • A proactive, team-oriented mindset, • Strong planning and organisational skills, • Clear and effective communication, • Commitment to delivering high standards of work, • Customer-focused approach, • Ability to adapt to changing priorities What We Offer • 25 days annual leave + bank holidays (with option to buy 5 more) PLUS a day off for your birthday and increase with length of service!, • Matched pension, • Life Assurance & Private Medical Insurance (after 12 months), • Flexible benefits including retail discounts, electric car scheme, wellbeing support, • Recognition & referral bonus programmes, • Volunteering day & Employee Assistance Programme At Dalkia, we are committed to equity, diversity, and inclusion. We ensure that every applicant is treated fairly and respectfully throughout our selection process. If you require any adjustments, please inform us in confidence. Our talent acquisition team is here to assist you.

Electrically Biased Building Services Engineer Mobile Role – Occasional travel to Cambridgeshire We are looking for an experienced Electrically Biased Building Services Engineer to join our multidisciplined Reactive and PPM team. This is a mobile role supporting a range of client sites, delivering both planned preventative maintenance (PPM) and reactive services. You will play a key role in ensuring the safe, compliant, and efficient operation of electrical and building services equipment across multiple contracts. Key Responsibilities • Carry out planned preventative maintenance (PPM) on electrical and building services systems, • Respond promptly to reactive maintenance issues and helpdesk requests, • Perform electrical fault finding, diagnosis, and repairs, • Undertake electrical installations, including testing and certification, • Complete all test and inspection certificates in line with client requirements, • Maintain accurate records using the CAFM system, • Ensure compliance with health & safety standards and regulations, • Liaise with managers, supervisors, and subcontractors to ensure smooth delivery of works, • Support wider team activities and complete ad hoc tasks as required What We’re Looking For Essential Qualifications & Experience • City & Guilds 2360 Parts 1 & 2 (Electrical Installation), • City & Guilds 2391 (Inspection, Testing & Certification), • City & Guilds Level 3 (2330 / 2360 or equivalent), • 18th Edition BS7671 Wiring Regulations, • Minimum 3 years’ experience in an industrial or commercial environment, • Strong understanding of building services maintenance and fault diagnosis, • Knowledge of health & safety practices within a building environment, • Excellent communication and organisational skills, • Ability to work independently and manage workload effectively, • Flexible approach to working hours Desirable Skills • Experience using CAFM systems, • Knowledge of UPS systems, • Experience with high voltage switching, • Basic mechanical knowledge, • Previous supervisory experience What You’ll Bring • A proactive, team-oriented mindset, • Strong planning and organisational skills, • Clear and effective communication, • Commitment to delivering high standards of work, • Customer-focused approach, • Ability to adapt to changing priorities What We Offer • 25 days annual leave + bank holidays (with option to buy 5 more) PLUS a day off for your birthday and increase with length of service!, • Matched pension, • Life Assurance & Private Medical Insurance (after 12 months), • Flexible benefits including retail discounts, electric car scheme, wellbeing support, • Recognition & referral bonus programmes, • Volunteering day & Employee Assistance Programme At Dalkia, we are committed to equity, diversity, and inclusion. We ensure that every applicant is treated fairly and respectfully throughout our selection process. If you require any adjustments, please inform us in confidence. Our talent acquisition team is here to assist you.

Electrician Your new company You will be working for an electrical contractor who specialises in commercial projects in the North of England but have since expanded and require a temporary solution to assist their trades staff. Your new role You will be assisting a contractor on a refurbishment project at Bicester Village in Oxfordshire, working alongside the other electricians to assist with installation and general maintenance work that needs carrying out on site. What you'll need to succeed You Must have ECS GOLD CARD (NVQ L3) IPAF What you'll get in return £30 PAYE Umbrella per hour Continuous work (Long Term Temp) What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. 4777509

Installations Engineer (Field & Office Based) 📍 South Oxfordshire (easy access required) 💰 Circa £36,000 + Company Vehicle 🕒 Full-Time | Monday–Friday The Opportunity We’re recruiting for an experienced Installations Engineer to join a growing and well-established organisation within the vending and beverage solutions sector. This is a fantastic opportunity for a motivated engineer looking for a varied, hands-on role within a busy service environment, offering long-term career development and progression. You’ll play a key role in delivering first-class installations and technical support, ensuring equipment is installed, commissioned, and operating to the highest standards. Key Responsibilities Installations & Field Work • Install, relocate, and decommission vending equipment at customer sites, • Carry out site surveys ahead of installation, • Complete pre-delivery inspections (PDI) prior to dispatch, • Liaise directly with customers on-site, ensuring a professional service, • Record opening and closing meter readings accurately, • Complete all job-related documentation and obtain customer sign-off, • Prepare and configure equipment prior to installation, • Maintain tools, equipment, and vehicle stock levels, • Ensure compliance with Health & Safety standards at all times, • Liaise with internal departments where required, • Identify and report customer issues or potential risks to business, • Highlight potential new business opportunities to the sales team, • Maintain a professional company image at all times What We’re Looking For • Minimum 4 years’ experience as a Service/Installation Engineer within the vending industry, • Experience working with equipment such as Evoca, Coffetek, Crane, Aqua Libra, Rex Royale, Borg & Overström, or Cimbali (highly desirable), • Strong understanding of mechanical, electrical, and/or plumbing systems, • Excellent organisational skills and attention to detail, • Strong customer-facing communication skills, • Ability to work independently and as part of a team, • Comfortable working under pressure and to deadlines, • IT literate (Microsoft Word & Excel), • Full UK Driving Licence (clean) What’s on Offer • Salary circa £36,000, • Company vehicle provided, • Stable, growing business with strong reputation, • Varied role combining field and workshop-based work, • Opportunity for career progression within the service function Location Candidates must have easy access to South Oxfordshire, with regular travel to customer sites as part of the role. Apply Now If you’re an experienced vending engineer looking for your next challenge in a dynamic and growing environment, we’d love to hear from you.

Redline has an extraordinary opportunity for multiple Contract Mechanical Technicians based in Oxfordshire, with a specialist scientific company who are at the forefront of groundbreaking scientific experiments. Do you have the right skills and experience for this role Read on to find out, and make your application. This contract will not accept candidates operating via a PSC, therefore you will be required to work via an Umbrella company. This is a great opportunity to work with technology that you will not find anywhere else in the UK. The company is currently undertaking the biggest project in their history, worth around £500 million and they need you to come on board and help them make it a success. You will be responsible for the upgrade and installation of existing mechanical units and placing them into racks to fit into a bigger machine. Key skills required for the Contract Mechanical Technician position based in Oxfordshire: • Experience in construction, conditioning, testing, installation & commissioning Mechanical Systems, • Experience working in high technology or Ultra High Vacuum environment xrnqpay, • Recognised Apprenticeship in Mechanical or Electrical Engineering discipline, alternatively significant years of experience For more information or to apply for the Contract Mechanical Technician opportunity based in Oxfordshire, please contact Jack Kelly - (url removed) / (phone number removed) quoting reference JWK1068

We are seeking an experienced Electrical Manager to oversee all electrical works on a large commercial construction project. The successful candidate will be responsible for managing electrical installations, coordinating with subcontractors, and ensuring all work is delivered safely, on time, and to the highest quality standards. Electrical Manager Key Responsibilities * Manage and supervise all electrical activities on the commercial project site * Coordinate with project managers, engineers, and subcontractors * Ensure compliance with electrical regulations, safety standards, and project specifications * Review drawings, technical documents, and installation plans * Monitor progress, quality of workmanship, and site productivity * Conduct inspections and resolve technical issues on site * Manage electrical teams and subcontractors * Maintain project schedules and report on progress * Ensure all health & safety procedures are followed Electrical Manager Requirements * Black ECS * SMSTS * Proven experience as an Electrical Manager or Senior Electrical Supervisor on commercial construction projects * Strong knowledge of electrical systems, installations, and building services * Ability to read and interpret electrical drawings and specifications * Expe...

Freelance Opportunity – Electrical Project Engineer - Oxford - 7 Months - Up to £400 per day Job Title: Electrical Project Engineer Location: Oxford Rate: £400 per day Start Date: ASAP Duration: 7 Months We are currently seeking an experienced Electrical Project Engineer to join a major project in Oxford on a freelance basis. This is an excellent opportunity to play a key role in delivering high-quality electrical services on a complex build, working alongside a leading project team. The Role Reporting directly to the MEP Project Manager, you will take full responsibility for the delivery of electrical services across the project, working in close collaboration with a mechanically biased counterpart. Key responsibilities include: Managing and overseeing electrical services delivery from design through to installation Coordinating off-site manufacture, production, logistics, and on-site installation Overseeing sectional external electrical services distribution across the project Ensuring works are delivered safely, on programme, and ...

Electrical Project Manager required. A long-established, family-run M&E contractor with over 50 years of experience delivering high-quality electrical and mechanical projects across the UK are currenlty looking for a electrical project manager to manage projects such as heritage sites, commercial, healthcare, education and high end fit out projects. You will take full responsibility for the electrical delivery of projects from pre-construction through to commissioning and handover, working closely with clients, consultants, and main contractors. Electrical Project Manager Duites * Manage multiple electrical projects concurrently across commercial, healthcare, education, and heritage sectors * Lead projects from contract award through to completion and client handover * Coordinate design, procurement, installation, and commissioning activities * Ensure all works meet required standards including NICEIC compliance * Liaise with clients, architects, consultants, and subcontractors to deliver projects- Oversee site teams, supervisors, and subcontract labour * Ensure full compliance with health & safety and quality standards Ideal canaidate * 5+ years’ experience as an Electrical Project Manager * Strong technical knowledge of electrical installations and building services Offer * Competitive salary and benefits package * Company vehicle or allowance * Pension scheme * Long-ter...

Solar PV Electrician At Build Recruitment, we work exclusively with Built environment specialists around the UK. Our client is looking for experienced Solar PV Electricians to carry out a variety of electrical installation work on a Contract in Oxford. Required qualifications & experience: Ex

Job Title: Gold Card Electrician Location: Iverson Building, Oxford Project Duration: Until end of May 2026 (with potential continuation into Phase 2 for the remainder of the year) Start Date: ASAP Overview We are currently seeking 3 Gold Card Electricians to join our team at the Iverson Building. This is an excellent opportunity to work on a long-term project running through to May 2026, with the potential to continue into Phase 2 for the remainder of the year. Key Responsibilities * Carry out electrical installation works in line with project specifications and industry standards * Ensure all work is completed safely and in compliance with current regulations * Work collaboratively with site management and other trades * Maintain high standards of workmanship and productivity Working Hours * Standard hours: 7:00am – 4:00pm * Flexibility is essential, as we are implementing a back shift (3:00pm – 11:00pm) * Hours worked after 5:00pm will be paid at 1.5x rate * Weekend work will also be required, paid at 1.5x rate Requirements * Valid Gold Card * Proven experience in electrical installation * Strong understanding of health and safety regulations * Reliable, flexible, and willing to work shift patterns and weekends as required * Ability to work independen...

Job Title: Multi Skilled Shift Engineer (Electrical Bias) Working for a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Multi Skilled Shift Engineer (Electrical Bias) to join the team located in Oxford. The job purpose is to carry out planned preventative maintenance, reactive works to building plant, equipment and systems in accordance with agreed service levels, undertake small installation works and respond to site engineering emergencies. Key Tasks • Ensure that routine maintenance is carried out to all electrical / Mechanical systems to meet and exceed expectations, and agreed service level agreements., • Carry out reactive repairs on all systems as required calling relevant sub-contractors as required., • Carry out all PPM maintenance as per the instruction set provided within Concept., • Reporting of all PPM defects via KPMG defect process and liaise with the supervisor of defect requirements., • Ensure weekly equipment reports are updated with any change in status of equipment., • Liaise with sub-contractors as req...

Electrical Engineer Location: Oxford OX Job Type: Full-time, Permanent Shift Pattern: Rotating WeeksHays are working with a leading facilities management provider to recruit an Electrical Engineer to join a critical site based in Oxford.This is an excellent opportunity for a qualified Electrical Engineer with experience in critical environments, power systems and reactive maintenance to join a well-established on-site engineering team.Shift Pattern Week A Monday, Tuesday, Wednesday: 07:00 - 19:00 Thursday & Friday: Off Saturday: 08:00 - 19:00 Sunday: 08:00 - 17:00 Week B Monday, Tuesday, Wednesday: Off Thursday & Friday: 07:00 - 19:00 Saturday & Sunday: Off Role Summary The successful candidate will be responsible for installing, maintaining and repairing the electrical plant and equipment, ensuring all faults are rectified swiftly and in line with SLA requirements. Key responsibilities include: Responding to reactive maintenance and breakdowns within agreed SLAs Carrying out repairs to modular UPS systems Testing and diagnosing power quality issues, including harmonic distortion Applying a risk-focused maintenance approach in critical environments Providing emergency response, standby and call-out support Escalating urgent issues to the Technical Services Manager Completing all reactive Helpdesk requests Producing method statements, risk assessments and works requests Undertaking upgrade and installation works Interpreting technical drawings, O&Ms and instructions Monitoring environmental conditions and critical equipment loading Completing incident reports and root cause analysis Ensuring all engineering documentation and records are kept up to date Adhering to financial and internal processes at all times Willingness to work above and beyond contractual hours when required Experience & Qualifications Essential 18th Edition Electrical Wiring Regulations Benefits The role offers a competitive benefits package, including: Company pension Employee discount Store discount Referral programme On-site parking Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk TPBN1_UKTJ

NewPower by Wrightbus offers a groundbreaking solution by repowering mid-life diesel buses, making it more affordable to decarbonise and improving air quality in cities. Wrightbus, the first bus manufacturer to launch repowering at scale, introduces NewPower to accelerate the decarbonisation of bus fleets across the UK, ensuring zero carbon emissions on all journeys. You could be just the right applicant for this job Read all associated information and make sure to apply. We are therefore recruiting a Vehicle Installation Electricianfor theBicester, Oxfordshiresite. The successful candidate will be responsible for the installation an test of chassis and body electrical control systems in accordance with customer specification, ensuring necessary quality standards are maintained and adhered to The Role: • Responsible for ensuring that the vehicle electrical control system is installed to the specification requirements as detailed by the relevant documentation., • Responsible for the installation and modification of vehicle wiring harnesses and components as detailed in the contract build documentation., • Responsible for the termination of various automotive and high voltage connections up to 800V AC or DC., • Responsible for the test and commissioning of the vehicle electrical system as per Quality Assurance documentation., • Responsible for the fault finding and repair of the vehicle electrical system using bespoke diagnostic software., • Time served as an automotive, domestic or industrial electrician, • Demonstrate capability to work on systems up to 600V AC or DC, • Capable of reading wiring diagrams, • Demonstrate experience of routing and connection of various cable types, • Medicash Scheme, • Discount with local businesses and high street retailers, • Career progression, • Professional development Note: This job description will be subject to review in the light of changing circumstances and may include other duties and responsibilities, as may be determined in consultation with the jobholder. It is not intended to be rigid and inflexible but should be regarded as providing guidelines within which the individual works. xrnqpay Wrightbus is committed to equality of opportunity and to selection on merit.

We are recruiting an experiencedDomesticElectricianqualified to: • 2365 Level 3 Diploma in Electrical Installation (or equivalent electrician qualification), • BS7671:2018 Wiring Regulations for 18th Edition The job requires working acrossOxford and Thames Valley area,travelling will berequired. Gilmartins is a family owned and run business; our staff are valued and our ethos is to promote from within. Our Board of Directors mostly started on the tools themselves so have a hands-on understanding of the work we do. Requirements for Job: You could be just the right applicant for this job Read all associated information and make sure to apply. • Full manual driving license not automatic licence, • Own tools, • Fully qualified and able to provide copies of certificates, • DBS certificate, • ECS card - ideally Company Benefits: • Company Van, Fuel card, Paid parking xrnqpay, • Mobile phone / PDA, • Career development opportunities, • 28 day paid annual holiday (to include bank holidays), • Employee Assistance Programme, • Hamper at Christmas, • The annual salary of £50,000 (basic salary inclusive of bonus).

Job Description Increase your chances of an interview by reading the following overview of this role before making an application. Electrical Estimator & Project Manager Banbury Permanent, full-time Competitive salary plus benefits and company car The Electrical Estimator & Project manager is required to undertake all duties associated with the preparatory tasks in relation to service delivery, namely surveys, preparing and submission of quotations, supervision of works teams and other associated tasks. When working as a project manager, you will be required to oversee & ensure the delivery of various contracts involving electrical systems maintenance and repair. More about the role: • Undertaking full and concise site surveys, preparing and submitting accurate works quotations and job engineering., • Supervising specialist subcontractors to ensure service provided is as per service level agreement; reporting any issues supervision immediately and contribution to problem resolution., • Supervise all Adler and Allan personnel on site whilst works are being undertaken; ensuring all personnel are provided with a full brief of works and ensuring service delivered in of a high standard., • Preparation of RAMS to a high standard and fully compliant with relevant legislation., • Provide accurate weekly sales KPIs to management in a timely and efficient manner.Additional key tasks & accountabilities when acting as Project Manager:, • Manage teams of Engineers to ensure work is carried out on time and safely, • Liaise with Service Engineers and subcontractors and carry out site audits as and when required to ensure work is being undertaken to a high standard, • Overseeing & quoting any variations., • Ensure stringent KPIs are followed and complied with and reported back to the customer in a timely fashion., • Communicate with customers and attend face to face meetings as and when required., • Ensure installation handover documentation is produced and passed to clients on time

Well-established, nationwide business in the entertainment / gaming sector is looking to recruit an electrically biased Maintenance or Service Engineer who has excellent hands-on repair, fault finding and debugging skills. An understanding and familiarity with IT network connectivity and general IT infrastructure would be a bonus. From our Northamptonshire office and covering the Midlands region, build yourself a career with UK owned business that continues to grow and promote from within. Considering making an application for this job Check all the details in this job description, and then click on Apply. BASIC SALARY: Up to £35,000 BENEFITS: · Company vehicle (Van) · 23 Days Holiday (& Bank Holidays), rising with service · Access to full company benefits package including pension, healthcare and EAP. LOCATION: Extended commutable to the Northamptonshire Office COMMUTABLE LOCATIONS: Northampton, Milton Keynes, Luton, Coventry, Rugby, Daventry, Wellingborough, Market Harborough, Corby, Leicester, Leamington Spa, Banbury, Bletchley, Bedford, Kettering, Peterborough, JOB DESCRIPTION: Electrical Field Service Engineer, Electrical Technician, Maintenance Engineer - Gaming, POS, ATM, Photocopiers This is a field based electrically biased Service Engineer role providing scheduled service, maintenance, reactionary repair, installation and commissioning of a very wide range of machinery across the midlands (and occasionally further afield). You will also be responsible for repair and pre-commissioning of equipment at the Northampton workshop. Very limited staying away. You'll also be liaising with internal team members, providing remote technical support for computer hardware and POS systems. As such, a familiarity with fault finding / extracting the relevant information from software applications would be a benefit. You will also support the internal IT systems - with very occasional shared IT support monitoring over evenings and weekend (for critical events only), and to cover holidays. KEY RESPONSIBILITIES: Electrical Field Service Engineer, Electrical Technician, Maintenance Engineer - Gaming, POS, ATM, Photocopiers · Field based electrically biased Service Engineer role · Repair and pre-commissioning of equipment at the Northampton workshop · Electro-mechanical work on hardware, plus troubleshooting issues related to software applications / network connectivity. PERSON SPECIFICATION: Electrical Field Service Engineer, Electrical Technician, Maintenance Engineer - Gaming, POS, ATM, Photocopiers · An electrically biased Maintenance or Service Engineer with excellent hands-on repair, fault finding and debugging skills · Familiarity with electrical equipment - so any experience in the gaming machine, atm, photocopier, point-of-sale sectors would be an obvious advantage · Understanding of network connectivity and general IT infrastructure would be an advantage THE COMPANY: Established over 20 years ago, this family run business has seen large amounts of growth in the last few years, and doesn't see that expansion slowing up any time soon. Come join this thriving, successful business where you'll be a key component in a flourishing engineering team. PROSPECTS: We have a strong proven track record of promoting and developing from within. In fact, some of the members of the engineering, commercial and senior leadership teams began working at entry level positions and through training and development moved up within the business. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Maintenance Engineer, Electrical Engineer, Electrician, Site Engineer, Shift Engineer, Field Service Engineer, Facilities Management, Electromechanical - Gaming , POS, ATM, Photocopiers, Franking machines INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. xrnqpay Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP18432, Wallace Hind Selection

Build Exceptional Vehicles for Luxury Travel as a Fitter Ready to make your application Please do read through the description at least once before clicking on Apply. Location: Banbury Contract Basis: Permanent, Full time Pay Rate: From £30,000 per annum – negotiable for experience. Hours: Monday to Friday – no weekends! Fitter wanted to join a team of experts with a reputation for campervan luxury, delivering bespoke vehicle builds and conversions. Working with the worlds go-to campervans and motorhomes, you will showcase your skills in electrical and trim fitment to ensure a one-of-a-kind model is delivered to the forecourt for customers to embark on their adventures! You will play a crucial role in the assembly, installation, and finishing of vehicle interiors and electrical systems and integral appliances, ensuring each build meets exacting standards. Working across multiple stages of production, the Fitter will support both functional and aesthetic excellence in every vehicle produced. Key Responsibilities of the Fitter: • Install interior units, fixtures, and fittings to specification, • Support electrical and basic gas installation activities, • Test electrical systems, appliances, and installed components, • Install upgrades including solar panels, wiring harnesses, lighting, and accessories, • Inspect interior finishes to ensure quality and accuracy, • Carry out adjustments, repairs, and finishing tasks, • Conduct gas system testing for safety and performance, • Work within a supportive and friendly team environment, • Be part of a growing, fast-paced automotive manufacturer, • Opportunity to develop practical skills in a specialist vehicle build setting, • Consistent day shifts with no weekend working Hours: Monday to Friday, 08:00 – 17:00 - No weekends. Pay: from £30,000 per annum – negotiable for experience Ready to Join the Team? If you are an experienced Fitter looking to progress within a dynamic and quality-driven environment, this opportunity offers the chance to make a real impact. Apply now with your CV, and a member of our team will contact you to discuss the next steps. xrnqpay All applications are handled with the utmost confidentiality. Key Skills: Electrical installation, automotive fitting, vehicle conversion, wiring systems, quality inspection, interior assembly, production environment, gas system testing, attention to detail

At Valeo Foods UK we bring together a family of much-loved UK food brands supported by the scale and ambition of a global investment partner. From Kettles bold crunch to Rowses natural sweetness, through to Matthew Walker and Barratt Sweets, our portfolio blends heritage, craft and category-leading innovation. Alongside our branded portfolio, we are also one of the UKs largest suppliers of private label products, partnering with major retailers to deliver quality and category expertise that meets the needs of millions of households every week. As a business, were on a journey of transformation. Were strengthening our operations, driving quality and investing in our people. Its an exciting, fast-moving environment where heritage meets new thinking, and where every colleague contributes to shaping the future of food across the UK. Join us and play your part in building the next chapter of some of Britains most loved brands. Job Description Position:MultiSkilled Engineer (Electrically biased) Type:Full-time, Day shifts (2s and 3s) 6am till 6pm We are looking for a skilled Multi-Skilled Engineer with a strong electrical bias to join the engineering team at the Rowse Honey manufacturing site. Skills, Experience, Qualifications, If you have the right match for this opportunity, then make sure to apply today. This role would suit an engineer experienced in maintaining and fault-finding packaging machinery within a manufacturing environment, with the ability to apply both electrical expertise and solid mechanical knowledge. While FMCG experience is not essential, you will be working in a fast-paced FMCG operation, supporting the reliability and continuous improvement of high-speed packaging lines in a food manufacturing setting. Key Responsibilities: • Bee the Fixer:Conduct regular maintenance and repairs on our buzzing machinery, keeping everything in tip-top shape., • Bee the Troubleshooter:Diagnose and squash mechanical and electrical issues faster than a bee can flap its wings., • Bee the Innovator:Assist in the installation of new machines and upgrades, bringing fresh ideas to our hive., • Bee Safe:Adhere to all health and safety regulations because happy bees are safe bees. To work as part of the engineering team to provide effective and efficient mechanical and electrical support throughout the factory. Tasks will involve reactive support in the factory; continuous improvement projects planned though the maintenance system and planned maintenance tasks. The role will be working with a wide range of complex automated cooking processes and packaging equipment. • Provide a proactive response to maintenance, continuous improvement tasks and reactive breakdowns on site;, • Accurate recording of all work activities;, • Completion of RCAs as required;, • Escalation of any further works required;, • Identification of CI projects for repetitive problems. xrnqpay Qualifications, • Relevant engineering qualification, • Able to prove competency in all forms of isolation, electrical safety and safe panel entry, • PC Literate (thereby able to use computer-based maintenance systems), • Flexibility, • Health and Safety driven, • 20% shift allowance, • Excellent Career Opportunities, • Matched pension scheme up to 10%, • Death in service, • Cycle to work scheme, • Retailer discount platform, • Staff discount, • And plenty more!

Our client is a leading distributor of water treatment plant to the construction, rail and utilities sectors and due to continued expansion Staffbase have been appointed to recruit for the position of Field Service Engineer (Water Treatment Plant). The successful candidate will be an electrical bias engineer and you will carry installation, service and repair of water treatment plant throughout Central England. £45K - £48K + OT + Bonus OTE £55K + The Role: Reporting to the service manager you will be responsible for installations, service, repair and testing of water treatment plant at various industrial locations in your area. Duties will include but is not limited to the following; • Installation and commissioning water treatment plant including filtration, dosing units, osmosis plant, modular units, settlement tanks, monitoring equipment and more., • Mechanical maintenance and repair pumps, motors, pipe work, filters, • Electrical fault find and repair of control panels, wiring etc etc You will be an experienced multi-skilled engineer with excellent electrical fault find and repair skills and you should have previous experience and knowledge of water treatment plant. You will have a recognised electrical mechanical engineering qualification e.g. NVQ3, 18th edition etc etc. Be one of the first applicants, read the complete overview of the role below, then send your application for consideration. Ideally you will have a valid UK driving licence. xrnqpay There will be travel throughout the midlands region and occasionally throughout the UK to under take your duties. Hours of work: Monday to Friday 7.30am -4.30pm + OT Benefits: Basic salary £45K - £48K + OT + Bonus (OTE £55K) 33 days annual leave Company Van Healthcare Pension

Field Service Engineer Oxford £40,000 Apply below after reading through all the details and supporting information regarding this job opportunity. • £50,000 (£60,000, • £65,000 OTE ) Company Vehicle Pension 28 Days Holiday Immediate Start Paid Door to Door Additional Training Are you a Field Service Engineer who wants the freedom to control your earnings through overtime? This is a fantastic opportunity to join a market-leading Hydraulic lifting supplier, recognised across the UK for their expertise in installation, service, and maintenance. Join as a Field Service engineer and be a part of a tight-knit engineering team where your skills are valued, your effort is recognised, and you're not treated like just another number. With unlimited overtime on offer, you'll have the chance to significantly boost your earnings while working on challenging, high-value projects. You'll benefit from an organised structure and the chance to work on varied sites across the UK. Your Role as a Field Service Engineer Will Include: Carry out installation, servicing, and maintenance of bespoke hydraulic lifting equipment at customer sites across the UK. Travel to client locations to diagnose faults, perform repairs, and ensure equipment is operating safely and efficiently. Work hands on with electrical, hydraulic, and mechanical systems during installation and commissioning projects. The Successful Field Service Engineer Will Need to Have Experience working with electrical and hydraulic engineering systems, ideally within lifting equipment or similar machinery. Basic mechanical and hydraulic fault finding skills with the ability to work on bespoke engineered solutions. PLC knowledge and practical engineering experience gained through industry work. NVQ Level 2 or equivalent in an electrical or hydraulic discipline along with a valid CSCS card. Please apply directly or contact for consideration This vacancy is being advertised by Future Engineering Recruitment. The services of Future Engineering Recruitment are that of an Employment Agency. Please visit our website at .uk to view other positions we are currently handling. Future Engineering Recruitment can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed. xrnqpay We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted. Field Service Engineer, Field Engineer, Service Engineer, Field Maintenance Engineer, Field Support Engineer, Technical Field Engineer, Installation Engineer, Commissioning Engineer, Service Technician, Field Service Technician, Maintenance Engineer, Mobile Service Engineer, On Site Engineer, Customer Support Engineer, Technical Support Engineer, Equipment Service Engineer, Mechanical Field Service Engineer, Electrical Field Service Engineer, Electro Mechanical Field Engineer, Automation Field Service Engineer, Controls Field Service Engineer, Industrial Service Engineer,

Job Description: Join us, be part of more. Were more than an energy company. Were a family of brands revolutionising how we power the planet. We're energisers. One team of 21,000 colleagues that's energising a greener, fairer future by creating an energy system that doesnt rely on fossil fuels whilst living our powerful commitment to igniting positive change in our communities. Here, you can find more purpose, more passion, and more potential. Thats why working here is MoreThanACareer. We do energy differentlywe do it all. We make it, store it, move it, sell it, and mend it. About your team: At British Gas, our mission is to sell it and mend it. Were the household heroes powering 1 in 3 homes in the UK but supplying energy is just part of what we do. Were making the UKs homes greener and more energy efficient, with our friends at Hive. By using their clever tech like thermostats, heat pumps, solar panels and EV chargers, were making it cheaper and easier to reduce your homes carbon-footprint. And with our new Peak Save programme, were actively rewarding better energy use too. About your role:We need Heating Installation engineers to join our team of experienced Gas Engineers, to ensure that our customers get the help they need, when they need it. Being there for our customers is our priority. Base Salary is £45,806 with uncapped OTE through our fantastic field reward scheme. You will join a team thats focused on putting smiles on our customers faces and keeping the nations homes warm for winter by installing and upgrading central heating systems. We are looking for engineers with extensive experience in full installations, upgrades, conversions, and other associated plumbing works. Here's what were looking for: A natural dedicated focus on providing outstanding customer experience on every visit. Current ACS qualifications (CCN1 and CENWAT) or equivalent in plumbing or heating. 3 years qualified experience behind you of full system installations. Electrical knowledge, including wiring and fault finding on S-plan, Y-plan and combination systems and boilers. Why should you apply? Were not a perfect place, were a people place. Our priority is supporting all of the different realities our people face. Life is about so much more than work. We get it. Thats why weve designed our total rewards to give you the flexibility to choose what you need, when you need it, making sure that you and your family are supported not only financially, but physically and emotionally too. If you're full of energy, fired up about sustainability, and ready to craft not only a better tomorrow, but a better you, then come and find your purpose in a team where your voice matters, your growth is non-negotiable, and your ambitions are our priority. Help us, help you. We would love for you to share any information about yourself throughout our recruitment process so that we can better understand you and help shape your journey.c272c101-f45c-4783-b4a0-50ad222b87c0

A leading installation company in the UK is seeking electricians to join their network of heat pump installers.Responsibilities include delivering high-quality installations, collaborating with a team, and documenting work efficiently.Essential qualifications include NVQ 3 in electrical installation

Senior Electrical Commissioning Engineer.As a Senior Electrical Commissioning Engineer at UKAEA, you will lead the testing and commissioning of RACE electrical systems, ensuring compliance with site requirements and safety standards.Your role involves overseeing installation of hardware and cabling

A leading energy authority in the UK seeks a Senior Electrical Commissioning Engineer to lead testing and commissioning of electrical systems at their Culham facility.You will ensure compliance with safety standards, oversee installation activities, and produce detailed documentation.The role demand

Experienced electrician needed for aerospace and defense manufacturing in Glasgow.Requires electrical installation and wiring expertise.

Service Engineer / Field Service Technician / Filtration Engineer required to join a leading manufacturer of Air Filtration products. The Successful Service Engineer / Field Service Technician / Filtration Engineer will provide electrical and mechanical repair, service, and maintenance on various industrial Air Filtration systems at customer sites the South West, including Cornwall, Somerset, Dorset, and surrounding areas, such as LEV systems, dust & fume extraction / collectors , mist extraction, woodwaste / wood chippings, and related components. The Service Engineer / Field Service Technician / Filtration Engineer will ideally have an engineering background in LEV testing or servicing, within factory LEV, industrial / process extraction, Containment / High - Hazard LEV, dust & fume extraction, mist removal / extrcation, air movement / filtration, or similar LEV environments. Package £35,000 - £40,000 depending on experience. Company vehicle, phone, laptop, tablet Overtime payments 25 days + Bank holidays Remote working Pension Additional benefits Service Engineer / Field Service Technician / Filtration Engineer Role To provide electrical and mechanical repair, service, and maintenance on various industrial Air Filtration systems at customer sites around the M62 corridor, such as LEV systems, dust & fume extraction / collectors , mist extraction, and related components. Meeting customers around the the South West. Knowledge and experience working with P601standards. Working on LEV systems, dust extraction, fume extraction, as well as similar filtration systems and products. Perform emergency breakdown fault finding and repairs on various airflow control equipment. Liaise with various engineering departments. Service Engineer / Field Service Technician / Filtration Engineer Requirements Proven diagnostic skills on complicated Air Filtration / LEV systems. Experience as a Field Service Engineer, Service Engineer, Service Technician, Installation Engineer, Filtration Engineer, Mechanical Engineer, M&E Engineer, Electro-Mechanical Engineer, LEV / Ventilation Engineer or similar. Hold a valid P601 is essential, further COSHH P certifications are beneficial. Good working knowledge of three-phase electrics and controls is advantageous. An engineering qualification would be advantageous. Full UK driving licence and travel across the South West, including Cornwall, Somerset, Dorset, and surrounding areas. TPBN1_UKTJ

As an experienced Service Engineer reporting to the Service Manager, you’ll undertake preventative maintenance, servicing and repair for all types of company products and commissioning across the UK. Covering a wide range of applications and in addition to supporting the customers, you will be providing technical support over the telephone. Tasked with providing product improvement and new sales opportunity feedback, you’ll need to communicate effectively with your colleagues in field service planning, commercial and engineering departments. You will need to have experience of working with building management systems (in particular control systems) construction sites and a flexible can-do approach. Other accountabilities as Service Engineer will include: • Dealing confidently and professionally with customers on-site, • Reporting accurately on all service visits, with accountability for component stock *Accounting accurately PPM schedules *Installation and commissioning of company products *Supporting customers on products and usage *Working on a variety of different construction sites *Knowledge of Electrical and Mechanical contracting *Managing own van stock *Experience of building management control systems from a variety of services, this could be from HVAC products, lighting, power generators, heating/ventilation units to name a few. The ideal candidate will have a hands on background from the building services sector and be time served within this field. You will ideally have a relevant Mechanical or Electrical qualification and a recognised HVAC qualification is desirable. Your experience could have potentially come from a variety of industries, electrical installations, commissioning of building services or the integration of HVAC products. This role is about finding the right individual who has a mindset to be motivated to deliver excellent customer service with a problem solving attitude. A strong all-round communicator, self-motivated and able to both work alone and as one of a team, you will also have a full valid driving licence as a company vehicle is included in the package. (This can be used for personal use at an additional tax cost) Please be aware this role covers clients within the UK so the ideal candidate could be located within a commutable distance from anywhere central. The role will include over night stays to cover the UK client base, covering annual leave or a potential large scale project. Over time and over night payment expenses are on top of salary listed with one day working from home each week (Friday) Please call/apply to discuss the full salary scope of the package. The client will provide full, on-the-job product training. The salary is based on the experience of the candidate so please get in touch to discuss your skill-set in more detail and the flexibility regarding the salary

Advanced Automation & Industrial Engineering Oxfordshire Up to £62,000 pa + paid overtime + extensive benefits package Control systems design within advanced automation The Opportunity Our client is a global leader in advanced automation and material handling solutions, delivering highly complex, large-scale systems into blue-chip customers worldwide. As part of continued growth, they are seeking a Controls Design Engineer to join their engineering team, playing a key role in the design and delivery of sophisticated automated systems across international projects. The Role You will be responsible for the design, development, and implementation of control systems, supporting projects from concept through to commissioning. Key responsibilities include: Designing PLC, HMI and SCADA control systems for automated solutions Developing and testing control software, including virtual simulation/emulation Interpreting electrical schematics and technical design specifications Supporting full project lifecycle delivery, from design through to site commissioning Ensuring compliance with relevant standards (including Machinery Directive / CE) Producing technical documentation (design specs, risk assessments, manuals, test procedures) Supporting installation, commissioning, and customer handover activities Collaborating with internal teams and external stakeholders to ensure successful project delivery Driving continuous improvement in engineering processes and system performanceAbout You We are looking for a hands-on Controls Engineer with strong technical capability and experience within industrial automation environments and bring a mix of the following skills and experience; Experience in PLC programming (Siemens S7 / TIA Portal preferred) Strong background in industrial automation / control systems design Experience with industrial communication protocols (e.g. Profinet, Profibus, Ethernet/IP) Ability to read and interpret electrical schematics and technical documentation Experience in software testing, validation, and system emulation Understanding of machinery safety standards and CE compliance Experience with distributed control systemsApply now to lead where precision, performance and passion meet. Or reach out directly for a confidential conversation. This role is being managed exclusively by Lord Search & Selection so to apply in confidence and to initiate an informal discussion, please submit a fully CV online detailing your current remuneration package and availability quoting job reference 10324. Desired Skills and Experience Automation, Robotics, PLC, Warehousing, 3PL, Logistics, Production, Manufacturing, Engineering, Industrial, Projects, Programmes, Program, Robotics, Controls, Software, S7, Siemens, TIA

Salary, Benefits & Hours £35,000 - £38,000 DOE 45‑hour working week with flexible hours Paid door‑to‑door travel About the Company A well‑established provider of vending and refreshment solutions, supplying, installing and maintaining a wide range of modern vending machines and workplace systems. The company supports customers across corporate and public‑facing environments, known for reliable engineering support, strong customer relationships and a fast‑paced, service‑driven operation. Why Join Them? Hands‑on engineering across vending and coffee equipment Reactive, varied field work Strong technical support network behind you Clear progression opportunities within the engineering team Autonomy in your field role with flexibility around working hours Role Overview Attending reactive callouts to diagnose and repair vending machines Servicing, maintenance and component replacement across machines Installation and setup of vending and refreshment equipment Working towards KPI targets such as response times and first‑time fix rates Completing accurate job records Managing van stock and ensuring required parts are ordered Providing professional communication with customers on site What We're Looking For Direct vending machine engineering experience - essential Strong mechanical, electrical and fault‑finding skills KPI‑driven individual with a strong work ethic Confident communicator with good customer‑facing skills Full UK driving licence (max 6 points) Hard‑working, reliable and able to work independently Work Location Field‑based role covering the Oxford region, supporting customers across a range of commercial environments. Travel is managed within your patch and paid door‑to‑door. If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Installations Engineer (Field & Office Based) South Oxfordshire (easy access required) Circa £36,000 + Company Vehicle Full-Time | Monday-Friday ________________________________________ The Opportunity We're recruiting for an experienced Installations Engineer to join a growing and well-established organisation within the vending and beverage solutions sector. This is a fantastic opportunity for a motivated engineer looking for a varied, hands-on role within a busy service environment, offering long-term career development and progression. You'll play a key role in delivering first-class installations and technical support, ensuring equipment is installed, commissioned, and operating to the highest standards. ________________________________________ Key Responsibilities Installations & Field Work * Install, relocate, and decommission vending equipment at customer sites * Carry out site surveys ahead of installation * Complete pre-delivery inspections (PDI) prior to dispatch * Liaise directly with customers on-site, ensuring a professional service * Record opening and closing meter readings accurately * Complete all job-related documentation and obtain customer sign-off * Report back to the office upon completion of works Workshop & General Duties * Prepare and configure equipment prior to installation * Maintain tools, equipment, and vehicle stock levels * Ensure compliance with Health & Safety standards at all times * Liaise with internal departments where required * Identify and report customer issues or potential risks to business * Highlight potential new business opportunities to the sales team * Maintain a professional company image at all times ________________________________________ What We're Looking For * Minimum 4 years' experience as a Service/Installation Engineer within the vending industry * Experience working with equipment such as Evoca, Coffetek, Crane, Aqua Libra, Rex Royale, Borg & Overström, or Cimbali (highly desirable) * Strong understanding of mechanical, electrical, and/or plumbing systems * Excellent organisational skills and attention to detail * Strong customer-facing communication skills * Ability to work independently and as part of a team * Comfortable working under pressure and to deadlines * IT literate (Microsoft Word & Excel) * Full UK Driving Licence (clean) ________________________________________ What's on Offer * Salary circa £36,000 * Company vehicle provided * Stable, growing business with strong reputation * Varied role combining field and workshop-based work * Opportunity for career progression within the service function ________________________________________ Location Candidates must have easy access to South Oxfordshire, with regular travel to customer sites as part of the role. ________________________________________ Apply Now If you're an experienced vending engineer looking for your next challenge in a dynamic and growing environment, we'd love to hear from you. Mandeville is acting as an Employment Agency in relation to this vacancy

Ready to Build a Successful Career in Building Services? We are a growing practice of building services consultants with offices across Oxford, London, Manchester, and Cambridge, specialising in mechanical and electrical engineering solutions. Our work spans lighting design, sustainability, building physics, and Passivhaus, across sectors such as Heritage, Rail, Transport Infrastructure, Education, Healthcare, and more. The Opportunity: We are looking for an Intermediate Electrical Engineer to join our Oxford team. This is an exciting opportunity to gain valuable experience and develop your career in building services engineering. You'll work closely with senior engineers and project managers across various sectors, playing a key role in the design and delivery of high-quality projects. What Will You Do? As part of the team, you will be involved in a variety of tasks throughout project delivery. Your responsibilities will include: ·Assisting with project surveys and feasibility studies ·Contributing to the design of electrical systems and specifications ·Supporting on-site supervision and installation management ·Assisting with contract administration ·Collaborating with other engineers and team members on a range of projects What We Are Looking For: ·A degree in a relevant subject ·Familiarity with project delivery across various sectors ·Proficiency in Revit ·Strong communication skills and attention to detail ·Competency in Microsoft Office ·Experience with design and modelling software (training will be provided) The Benefits: ·25 days paid holiday + bank holidays ·Opportunities for career growth and development ·Paid social events such as summer parties, team lunches, and activity days ·Private healthcare ·Bonusly reward scheme, with gift vouchers from leading brands ·Additional holiday purchase options ·Cycle to work scheme If you're looking to take the next step in your career and contribute to exciting projects, we'd love to hear from you! Apply now to join our dynamic and supportive team

Building Services Manager Oxfordshire / Berkshire Region Tier 1 Main Contractor Competitive Salary + Package A leading Tier 1 Main Contractor is seeking an experienced Building Services Manager to join their team, supporting the delivery of several high-profile, technically complex projects across Oxfordshire and Berkshire. This is an excellent opportunity to work on a diverse portfolio of schemes within the science, technology, and specialist infrastructure sectors, ranging in value from £35M to £80M+, all currently live and running through to 2027–2029. The Role As Building Services Manager, you will take full responsibility for the coordination, installation, and commissioning of all MEP services across multiple projects. You will work closely with project teams, consultants, and subcontractors to ensure building services are delivered safely, on time, and to the highest quality standards. Key Responsibilities • Manage all aspects of MEP design coordination and delivery, • Oversee subcontractor performance and ensure works are completed to specification, • Drive programme and ensure key milestones are achieved, • Review technical drawings, specifications, and commissioning plans, • Ensure compliance with all relevant regulations and health & safety standards, • Lead on commissioning, handover, and client engagement for building services, • Identify and mitigate risks associated with MEP packages About You • Proven experience as a Building Services Manager or Senior MEP Manager with a Main Contractor, • Strong technical understanding of mechanical and electrical systems, • Experience delivering complex new build projects (ideally within science, tech, or high-spec environments), • Ability to manage multiple stakeholders and subcontractors, • Excellent communication and problem-solving skills, • Relevant qualifications in Building Services Engineering or similar What’s on Offer • Opportunity to work on large-scale, technically challenging projects, • Long-term pipeline of secured work, • Career progression within a leading contractor, • Competitive salary, car allowance, bonus, and full benefits package

Astute's Renewable Energy Team is exclusively partnering with a key player in the Solar and BESS market who are looking for a HV Contracts Manager to join the team. The role is a pivotal one and the purpose is to ensure operational excellence and to ensure the provision of HV support across the business is there when required. This HV Contracts Manager role comes with a salary up to £55,000, incremental supplements for additional qualifications, a company vehicle plus bonus and generous benefits package. The ideal location would be in the South around Oxfordshire but we're open to a more remote option too. If you're a HV Contracts Manager and are looking to work for an innovative and proven Solar and BESS operator, EPC and developer, please get in touch. Responsibilities and duties of the HV Contracts Manager role Reporting to the HV Manager you will: Manage all key personnel/companies both internally and externally relating to the HV activities Planning and execution of HV switching, isolations and earthing up to 33kV (this is subject to internal sign off with competence) Schedule HV operations in different regions, staying up to date with any contractual obligation Assist with understanding and interpreting client requirements within the HV scope of contract Ensure that proactive, annual maintenance schedules are created and adhered to Assess the existing HV supply chain and ensure it's effectiveness, suggesting any improvements/changes with a data-driven approach Be able to carry out some HV remedial works when the decision is made to do the works internally Provide HV technical support for Field Engineers Full job spec available on application and request post telephone call with Astute Professional qualifications We are looking for someone with the following: Experience in large scale renewables projects, ideally BESS and/or solar Experience switching up to 33kV, 66kV would be great At least a NVQ level 3 in electrical installation, higher qualifications hugely desirable Personal skills The HV Contracts Manager role would suit someone who is: A strong communicator Excellent organisational skills Someone proactive and solutions-focussed Salary and benefits of the Business Development Manager role Up to £55,000 basic salary Increases depending on authorisations Company vehicle Bonus up to 12.5% Life insurance Private healthcare Great pension 33 days holiday inc BH #LI-TN1 INDREN Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful

Electrical installations Trainer / Assessor (Full Training Provided) Oxford £38,000 - £41,500 + Full Training on Renewables and teaching qualifications + Pension + 36 Days Holiday + Monday to Friday (8.30am - 5pm) Are you a qualified Electrician looking to step off the tools into a rewarding training and assessing role? Do you want to develop your skills in renewables while helping train and support the next generation of electricians? This well-established training provider delivers high quality Electrical and Building Services training, with a growing focus on renewable technologies. With strong industry links and continued investment in green energy, they offer a fantastic opportunity for an electrical professional to transition into education with full support and long-term development. In this role you will deliver Electrical and Renewables training while also assessing learners in the workplace. You will support apprentices and learners in developing their practical skills and technical knowledge, ensuring they meet industry standards. Full training will be provided, including support to gain assessor and teaching qualifications as well as upskilling in renewables. The ideal candidate will hold a Level 3 qualification in Electrical Installation (or equivalent with strong onsite experience) and be keen to move into a training role. Experience in renewables would be beneficial but is not essential as full training will be provided. This is an excellent opportunity for an electrician to move into a long-term career in training, gain highly sort after renewables skills, and enjoy a stable Monday to Friday role. The Role: * Deliver Electrical and Renewables training to learners * Assess learners in the workplace and support their development * Work 37 hours per week (8:30am - 5:00pm, Monday to Friday) * Full training provided including assessor and teaching qualifications The Person: * NVQ Level 3 in Electrical Installation or equivalent * Strong industry experience within Electrical * Interest in renewables (training provided) * Keen to build a long term career in training and education Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Service Engineer Location: Oxford - covering the South Salary: Up to £35,000 + overtime (OTE £50,000+) Perks: Technical development, IT/networking/automation skills growth, and fully paid training in Europe with a leading Swedish manufacturer. If you’re a hands‑on Service Engineer who enjoys solving problems, working with smart technology, and supporting customers, this could be the next step for you. You’ll be joining a growing company that supplies some of the most advanced automated storage systems on the market, including high‑performance Vertical Lift Modules (VLMs), vertical carousels, mobile shelving, pallet‑handling solutions, and software that integrates with today’s biggest WMS and ERP platforms. As the exclusive UK distributor for innovative Swedish‑built equipment, you can expect first‑class training, modern tech, and opportunities to build your expertise. This business has a reputation for exceptional customer service and end-to-end project delivery from consultancy and installation to long-term support. With customers in automotive, defence, pharmaceuticals, and other major sectors where reliability and precision matter. What You’ll Be Doing Once the installation team has handed over the equipment, you’ll step in as the key point of support for ongoing service and maintenance. Your day will mostly consist of planned service work rather than constant reactive callouts. You’ll be responsible for: • Servicing and maintaining VLMs, vertical carousels, mobile shelving, and pallet-handling systems, • Providing on-site support to customers — resolving issues, making systems safe, and keeping everything running smoothly, • Helping customers understand how to get the best out of their equipment, • Highlighting useful upgrades or new features where appropriate What You’ll Bring • Experience as a Service Engineer working with machinery or technical equipment, • A solid electromechanical background, • Electrical understanding — fault finding, 3‑phase, voltages, etc., • Mechanical skills — e.g. replacing drive systems, • Any IT skills (networking, software, diagnostics) are a huge bonus, • Experience in logistics, automation, automated storage, pallet handling or similar industries is desirable, • A proactive, problem‑solving mindset This is a great fit for someone who enjoys variety, autonomy, and working with modern technology — with the bonus of specialist European training and a realistic OTE above £50k

A motivated service engineer is required for our award-winning Sunday Times Fast Track 100 engineering client. In return there is an excellent salary circa £40k+ dependent on experience plus excellent benefits including an annual company bonus, generous holidays and an excellent contributory pension scheme in a well-established reputable growing company. Apply now! The ideal service engineer will have the following skills and experiences Engineering qualification: HNC, HND level 2/ 3 NVQ engineering or above ideally in electrical, electro-mechanical or mechanical or any similar engineering (vehicle plant, automotive, machinery) Service, repair, installation, diagnostic, calibration experience of large vehicles, heavy plant machinery, basic petrol, diesel engines or generators, large and small machines or similar machinery plant equipment or vehicles Some good electrical engineering experience and knowledge, hydraulics, ability to read engineering drawings, electrical diagrams, ideally automotive or vehicle plant voltage experience (desirable) 12v / 24v DC Automotive or plant type experience - Ex forces engineers, ex-military, REME technician engineers, RE plant operator engineers with good service and maintenance experience of plant, trucks, tanks, heavy plant equipment, fleet of vehicles, would be of distinct interest This service engineer role will be responsible daily for the repair, service and installation of safety and controls systems to control panels of the plant machinery. You will routinely be responsible for the preparation of the award-winning vehicles for sale to customers and fleet exhibitions so you must have excellent attention to detail, ensuring the plant machinery vehicles are in excellent clean presentable condition and fully safety compliant. Some key responsibilities of this service engineer role include; Diagnostic, inspection, part identification, testing, service and repair, rectification of faults of electrical machinery at the depot Installation of safety controls, safety load indicators SLIs control panels on plant equipment Safety compliance and preparation of vehicles, plant machinery for sale and hire for exhibition, market, customers and fleet This interesting electrical service engineer role would suit a methodical engineer with a flexible attitude who is looking for a long term stable and rewarding career. This role involves a regular workload and offers a great work life balance. Don't miss out! A full job description will be discussed and submitted to suitable candidates upon application. TPBN1_UKTJ

Electrician Oxfordshire - Local Patch £35,000 - £45,000 + Company Vehicle + Progression to Senior Management + Solar Training + Overtime + Enhanced Annual Leave + Pension Are you a qualified lead electrician looking to progress your career in the Solar sector? Do you want to the opportunity to move into senior leadership in an established company? If successful you will be joining a renewable company with over 15 years in the sector. This is one of 3 successful offices in the UK which due to ongoing success in both domestic and commercial sectors are looking to further expand the team. Your role within the company will involve electrician installations within a Solar installation team operating across the Oxfordshire area. This will be primarily domestic with exposure to commercial work also available. The ideal candidate for this role will have their electrical qualifications. They will ideally have experience in Solar however training can be provided if not. The Role • Solar installations, • Covering Oxfordshire area, • Progression to senior management available The Person • Electrically qualified, • Clean UK Drivers License, • Solar experience desirable - training is available if not To apply for this role or to be considered for further roles, please click "Apply Now" or contact Daniel Thomas at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

FIELD SERVICE ENGINEER Are you a Field Engineer, Service Engineer, Electrician, or Electrical Improver? Can you use a Multi Meter?The Company An international Manufacturer of Commercial Forecourt Equipment (Jetwashes/Air & Water Towers/Vacuums) are seeking a Field Service Engineer to support their continued growth. Vacancies exist for candidates who reside within the following area; Oxfordshire (Bicester, Banbury, Aylesbury, Didcot, Witney)The successful candidates MUST have; A full UK driving licence Checkable background/work history Able to use a Multi Meter OR an Electrical qualificationYou may be a Field Engineer, Service Engineer, Maintenance Engineer, Vehicle Technician, Vending Engineer, Electrical Improver or Electrical Mate - seeking a new role or a change of direction. IF YOU HAVE THESE SKILLS - Then full product training will be provided! Based from home and covering a region, repairing and maintaining the company's equipment. The working hours are Monday to Friday and also include one weekend per month to be worked (1 in 4). The remuneration package includes; Paid travel door to door £34,953 basic including 1 weekend a month Unlimited Overtime - leading to earnings in excess of £39-42k Paid Travel from Door to Door (paid from leave to return) Overtime Company vehicle, fuelcard, etc 28 to 33 days Holiday (20 rising to 25 days + Bank Holidays) Uniform, tools, PDA/mobile phoneInterested? Apply for this role with Start Monday now! Keywords; Electrical Improver, Compressor Engineer, Carwash Engineer, Industrial Engineer, Field Engineer, Electrician, Electrical Engineer, Field Engineer, Service Engineer, Maintenance Engineer, Installation Engineer, Technician, Door Engineer, Lift Engineer, White Goods, Vending Engineer, Coffee Engineer, Carwash Engineer, Pump Engineer, Vehicle Technician

Ready to Build a Successful Career in Building Services? We are a growing practice of building services consultants with offices across Oxford, London, Manchester, and Cambridge, specialising in mechanical and electrical engineering solutions. Our work spans lighting design, sustainability, building physics, and Passivhaus, across sectors such as Heritage, Rail, Transport Infrastructure, Education, Healthcare, and more. The Opportunity: We are looking for an Intermediate Mechanical Engineer to join our Oxford team. This is an exciting opportunity to gain valuable experience and develop your career in building services engineering. You'll work closely with senior engineers and project managers across various sectors, playing a key role in the design and delivery of high-quality projects. What Will You Do? As part of the team, you will be involved in a variety of tasks throughout project delivery. Your responsibilities will include: ·Assisting with project surveys and feasibility studies ·Contributing to the design of electrical systems and specifications ·Supporting on-site supervision and installation management ·Assisting with contract administration ·Collaborating with other engineers and team members on a range of projects What We Are Looking For: ·A degree in a relevant subject ·Familiarity with project delivery across various sectors ·Proficiency in Revit ·Strong communication skills and attention to detail ·Competency in Microsoft Office ·Experience with design and modelling software (training will be provided) The Benefits: ·25 days paid holiday + bank holidays ·Opportunities for career growth and development ·Paid social events such as summer parties, team lunches, and activity days ·Private healthcare ·Bonusly reward scheme, with gift vouchers from leading brands ·Additional holiday purchase options ·Cycle to work scheme If you're looking to take the next step in your career and contribute to exciting projects, we'd love to hear from you! Apply now to join our dynamic and supportive team

As an Electrical Tutor / Assessor, you’ll: * Deliver engaging, hands-on training.

Responsible for ensuring Electrical and Control Designs are completed in compliance with applicable Regulations and Standards, including o Conducting Machinery Safety Risk Assessments o Functional Safety Review o ISO 13849 Verification (calculation) o Documenting outcomes and managing non-conformances  Responsible for delivering all aspects of Electrical Design of new equipment, from design concepts, through manufacturing drawings, to testing and commissioning  Ensures compliant and safe delivery of hardware build on-site, including supplier & contractor management and installation approval / sign-off  Provides Control and Instrumentation input to the Process Engineering team, to design new manufacturing processes and control systems  Supports process development projects with input regarding instrumentation and control component requirements, selection and integration  Writes/Develops and maintains control systems and documentation, such as ladder logic code, logic diagrams, function block diagrams, SCADA interfaces, input and output lists  Analyzes EC&I (incl software) requirements to determine feasibility of design within time and cost constraints  Consults with other engineering staff to evaluate interface between hardware and software, and operational and performance requirements of overall system  Uses analysis and mathematical models to predict and measure outcome and consequences of control system design.  Trains electrical, controls & instrumentation engineers Essential  Demonstrable experience delivering machinery electrical design packages from concept to delivery, including ensuring machinery safety in design.  Familiarity with the following: • ISO 13849, • IEC 60204, • BS 7671, • ISO 12100, • IEC 60364, • ISO 13850  A BSc degree in mechanical, electrical, chemical or similar engineering, or equivalent level of experience  The ability to perform engineering mathematical calculations, such as electrical power, heat and flow  Competent computer skills such as excel formulae, visio and CAD drafting software (SW and SW Electrical preferred)  Ability to assume responsibility, be flexible, perform duties and handle multiple tasks under potentially stressful and/or hazardous conditions  The ability to effectively communicate, both verbally and in writing, with other individuals, teams, customers, and stakeholders of the business, at various levels of the organization, in a business-like and professional manner is required  Takes initiative and is proactive in addressing issues. Quickly and efficiently completes tasks Desirable  Qualified, trained or experienced in technical disciplines related to the job such as Electrical, Control theory, Industrial or Chemical Equipment design, Real-time Control, Programming,  Experience in related industrial areas such as chemical plant, industrial equipment design  Experience with Siemens PLC equipment  TUV certification or an internationally recognised equivalent  Be legally authorized to work in the UK without company sponsorship now or in the future.  First aid, CPR, Fire Warden certification Other:  Driving licence and ability to travel within the UK and abroad

Combined Small Works Manager & Buyer (R4) We are seeking an organised and proactive Small Works Manager & Buyer to oversee small works projects while managing procurement activities across both small works and main projects. This role is ideal for someone with strong coordination and problem-solving skills who can build and maintain excellent relationships with clients, engineers, and suppliers. You will play a key role in ensuring projects run smoothly by managing electrical works and sourcing materials efficiently and cost-effectively, all while upholding high standards of quality and service. Key Responsibilities – Small Works Oversee small works projects, maintenance, and remedial works for domestic and commercial clients (typically £250+), with an annual turnover of approximately £400k Act as the primary point of contact for small works clients, managing requirements, expectations, and communication throughout the project lifecycle Manage incoming calls and emails while planning, scheduling, and coordinating multiple small-scale electrical tasks simultaneously Handle reactive maintenance issues and daytime emergency callouts (e.g. power loss), including basic client guidance on fault finding (e.g. tripped RCBOs) Prepare pricing for small works, remedial tasks, EICRs, and installation projects Conduct site surveys for larger small works packages to produce accurate and competitive quotations Monitor and manage the performance of small works engineers to ensure high-quality workmanship Ensure all works comply with health & safety regulations and NICEIC certification standards Manage claims, invoicing, and notify accounts when works are ready for billing Raise job numbers for both small works and main projects Maintain and regularly update the main works job chart for accurate tracking Understand engineer capabilities to allocate work effectively based on strengths and experience Log NICEIC Building Control Notifications via the NICEIC portal following certification Support engineers requiring reactive maintenance or callout assistance on wider projects Key Responsibilities – Buyer & Procurement Order materials and equipment for small works and support main project procurement Send site requisitions to wholesalers, carry out price comparisons, and place orders Convert engineer material requests into purchase orders and issue to suppliers Ensure timely delivery of materials to maintain site productivity and avoid delays Manage supplier relationships, negotiate pricing, and ensure reliable service Identify and onboard new suppliers to strengthen the supply chain Carry out occasional store duties, including receiving deliveries and labelling stock Arrange repairs, servicing, and calibration of test equipment and tools Organise plant hire and access equipment as required Occasionally collect and deliver materials to sites when necessary Qualifications & Knowledge Proficiency in Microsoft Office 365, particularly Excel Good understanding of construction and electrical environments Relevant qualifications in Electrical Engineering, Construction Management, or a related field Strong organisational ability, with experience managing multiple small works projects alongside procurement responsibilities NICEIC Qualifying Manager status or C&G 2391 (advantageous) Willingness to progress into the role of NICEIC Qualifying Supervisor for small works certification sign-off Full UK driving licence What We Offer Competitive salary Opportunities for professional development and career progression Supportive and collaborative working environment Exposure to a diverse portfolio of commercial and industrial projects Company van or car allowance 24 days holiday plus bank holidays