Trabajos electrical installation en DoncasterCrear alertas

Job Role - Senior Electrical Engineer Summary The role of the Electrical Engineer is to design, develop and manage the technical and electrical requirements of the business. The engineer will integrate, test, and maintain electrical and electronic systems for vehicles, electric vehicle (EV) systems, and custom auxiliary systems and new OEM hardware/software. You will work closely with mechanical engineers and project managers to deliver safe, reliable, and innovative conversion solutions. The role also includes training, coaching and development of the personnel ensuring that the electrical team have the skillset required to fulfil their roles in the electrical department. The role will focus heavily on identifying and implementing technologic advances, owning the design, validation and sign‑off of 12/24V electrical systems for vehicle conversions, ensuring safe, compliant, cost‑effective solutions that are production‑ready, right‑first‑time, and type‑approval aligned. Typical Job Functions & Duties · Ownership & lead of all electrical aspects for vehicle conversion · Project management of electrical development, issue processing and improvements · Develop electrical solutions for vehicles conversions using wiring diagrams/schematics · Specify and integrate components such as batteries, inverters, chargers, control systems, lighting and various other electrical loads · Ownership of the electrical issue log · Responsible for creating/amending electrical SOP’s. · Oversee the installation of electrical systems during conversion projects. · Collaborate with mechanical teams to integrate electrical systems within vehicle constraints. · Conduct system validation, load testing, fault-finding, and debugging of electrical systems. · Develop and implement testing protocols to ensure reliability and safety. · Troubleshoot hardware and software issues (CAN bus, controllers, sensors, actuators, wiring & output devices). · Provide technical input during concept design and feasibility studies. · Assist in component selection, supplier liaison, and cost analysis. · Prepare documentation, technical reports, and support regulatory certification processes. · Ensure conversion designs are compliance with base vehicle manufacturer conversions requirements · Responsible for creating effective departmental processes and controls in line with QMS · Recognise and implement improvements through continuous monitoring · Responsible for providing training, development, coaching and mentoring of personnel ensuring the correct skillset is available for all required electrical works · Carry out electrical programming focusing on RFT · Manage and regularly engage with internal/external parties to ensure the company receive the required level of service to drive the business forward · Keep abreast and report on changes within the industry · Identify and implement technological advances · Support electrical fitters with any relevant documents including sop’s, photos, and drawings necessary to complete builds · Source alternative product where necessary to support builds · Maintain good house keeping · Implement and uphold health and safety protocols · Engage customers, suppliers and business contacts as required · Follow up corrective actions and implement measures to minimise problems or faults Qualifications & Experience Leadership role – 2+ years Electrical Engineering qualifications – Level 4 + Electrical engineering role experience – 5+ years Proven experience in automotive or vehicle conversion projects (EVs, hybrids, Commercial, leisure, emergency vehicles; internal combustion & electric vehicles). Strong knowledge of: • High-voltage and low-voltage vehicle systems - Low (230V) and extra low voltage (12/24V), • Battery systems, • Power electronics (inverters, chargers, converters), • CAN bus communication and diagnostic tools, • Add solar charging, wiring harness design, automotive connectors

Manufacturing Engineering Manager Clean Power Hydrogen Group Ltd is a vibrant alternative green energy technology company based in Doncaster and is listed on London's AIM market. Our technology platforms have caught the attention of many organisations both here in the UK and overseas. As a result, we are looking to expand our Operations team with a Manufacturing Engineering Manager. This role is a fantastic opportunity to work in an engineering and manufacturing environment in the hydrogen production sector. This role also gives you the chance to be part of a business that promotes development, recognises talent and is your opportunity to join a rapidly growing business. About CPH2: Clean Power Hydrogen Group Ltd is a leading developer of Membrane-Free Electrolysers™ designed to produce green hydrogen and pure oxygen in a simple, safe, sustainable manner and at any scale. Dr. Nigel Williamson and Joe Scott established CPH2 (Ireland) in December 2012 with the ambition to help clean up the environment for our children and future generations. Entering the green technology sector, a high growth, and profitable market, they developed a Membrane-Free Electrolyser™ to produce hydrogen faster, more reliably, and more cost-effectively than PEM technology, which has barriers to adoption, including cost, reliability, and scalability. About the role: The Manufacturing Engineering Manager leads the planning, development, and optimisation of manufacturing processes to ensure efficient, high-quality, and cost-effective production. This role serves as the key interface between Manufacturing and Mechanical Engineering, translating the MFE design intent into practical manufacturing solutions. The manager is responsible for developing assembly documentation, defining process flow, managing tooling and quality systems, and supporting continuous improvement initiatives across production operations. The successful candidate will be based at our Doncaster facility and will be working to ensure the successful commercialisation and Design for Manufacture implementation of our Membrane Free Electrolyser™ You will have the following key responsibilities: 1. Process & Documentation Ownership • Develop and maintain detailed assembly documentation, including work instructions, checklists, and installation drawings., • Ensure documentation accurately reflects design intent provided by Mechanical, Electrical and Process Engineering while remaining under Manufacturing control. 2. Manufacturing Flow Definition • Define subassembly build stages, sequence of operations, and factory layout., • Own process flow development and drive optimisation for efficiency and safety., • Collaborate with Engineering to validate technical feasibility of process changes., • Manage Engineering Control Requests for Engineering design changes. 3. Quality & Compliance • Manage in-process and end-of-line quality control, containment, and rework processes., • Partner with Engineering and Quality on non-conformances or specification issues. 4. Troubleshooting & Root Cause Analysis • Lead root cause investigations (RCA) for assembly or supplier issues., • Coordinate corrective and preventive actions with relevant teams., • Engage with Mechanical Engineering for issues requiring design modifications or tolerance adjustments. 5. Tooling, Equipment, and Test Systems • Specify, procure, and maintain assembly tooling, fixtures, and test equipment., • Develop and manage End-of-Line (EoL) test processes to verify the build., • Collaborate with Engineering to align on test parameters, load conditions, and pass/fail criteria. 6. Production Readiness & Work Order Release • Control release of work orders ensuring readiness of materials, documentation, and tooling., • Confirm technical readiness with Engineering before production start (e.g., design release, ECRs)., • Work with supply chain and planning teams to manage inventory, production scheduling, and material availability. As well as sourcing components efficiently and manage vendor technical issues during manufacturing 7. Continuous Improvement • Drive lean manufacturing, process standardisation, and productivity initiatives., • Track manufacturing KPIs (yield, rework, cycle time) and implement improvement actions., • Support cross-functional cost reduction and design-for-manufacture (DFM) efforts. You will maintain close collaboration with Engineering and Production to ensure manufacturability of the system whilst maintaining the design integrity as well as being able to conduct collaborative design reviews. You will act as the manufacturing voice, ensuring the product is designed for manufacturability, assembly, serviceability. You will be responsible for design optimisation for assembly, cost and reliability are to be fed back to Engineering to incorporate value engineering and Design for Manufacture improvements. Key skills and experience required: Must Haves • A degree in Manufacturing Engineering, Industrial Engineering or Mechanical Engineering., • 5+ years of experience in manufacturing, with at least 3 years in a leadership or management role., • Proven experience in developing assembly process design, tooling development and production line set up., • Strong understanding of mechanical design principles and how these can be translated into manufacturing practices., • Understanding of root cause analysis (RCA), FMEA, and continuous improvement methodologies (lean, six sigma etc.), • Proficient in tools such as CAD, ERP systems, PLM and document control workflows., • Excellent leadership, communication and cross-functional collaboration skills. Desirable • Experience in hydrogen production plants and cryogenic applications is a strong plus.

HSE Manager Clean Power Hydrogen plc is a vibrant alternative green energy technology company based in Doncaster and is listed on London's AIM market. Our technology platforms have caught the attention of many organisations both here in the UK and overseas. As a result, we are looking to expand our Operations team with a HSE Manager. This role is a fantastic opportunity to work in an engineering environment in the hydrogen production sector. This role also gives you the chance to be part of a business who promotes development and recognises talent and is your opportunity to join a rapidly growing business. About CPH2: Clean Power Hydrogen plc (CPH2) is a leading developer of Membrane-Free Electrolysers™ designed to produce green hydrogen and pure oxygen in a simple, safe, sustainable manner and at any scale. Dr. Nigel Williamson and Joe Scott established CPH2 (Ireland) in December 2012 with the ambition to help clean up the environment for our children and future generations. Entering the green technology sector, a high growth, and profitable market, they developed a Membrane-Free Electrolyser™ to produce hydrogen faster, more reliably, and more cost-effectively than PEM technology, which has barriers to adoption, including cost, reliability, and scalability. About the role: Reporting to the Chief Operations Director, the HSE Manager will be responsible for leading health, safety, and environmental management across the full lifecycle of MFE plant delivery - from design and manufacture of electrolysers through to installation and commissioning at client sites. The role ensures compliance with UK legislation and international project requirements, with a strong focus on process safety, hydrogen risk management, and construction safety within an EPC environment. We are seeking an experienced and proactive Health & Safety Manager to lead and continuously improve the company's Health, Safety, and Environmental (HSE) framework. This is a hands-on role ideal for someone who thrives in engineering and manufacturing environments, working closely with multi-disciplinary teams to build and continuously improve a strong safety culture. Responsibilities include: HSE Management & Assurance • Develop, maintain, and oversee the HSE Management System in line with ISO 45001 & ISO 14001., • Embed HSE across design, manufacturing, installation, and commissioning., • Lead internal/external audits and client assessments., • Implement PTW systems and track key HSE KPIs (e.g., TRIR, LTIFR)., • Drive continuous improvement and behavioural safety initiatives. Regulatory Compliance • Ensure full compliance with UK HSE legislation (including CDM, DSEAR, PSSR, COSHH, PUWER, LOLER)., • Act as main contact for the Health and Safety Executive and other regulators., • Provide expert guidance on all HSE matters across the business. Hydrogen & Process Safety • Support process safety activities (HAZID, HAZOP, LOPA, SIL)., • Manage ATEX/DSEAR compliance and hazardous area classification., • Develop emergency response plans and ensure safe installation, commissioning, and client handover., • Oversee contractor safety, RAMS, inspections, and incident investigations. Manufacturing & Test Site Safety • Ensure safe build, assembly, and testing of electrolysers., • Oversee high-risk activities (lifting, pressure testing, electrical work, chemical handling)., • Implement safe systems of work (LOTO, confined space, hot work). Environmental & Sustainability • Ensure environmental compliance and manage permits, waste, emissions, and resource efficiency., • Liaise with the Environment Agency and support ESG/net-zero initiatives. Leadership & Culture • Deliver HSE training, toolbox talks, and incident reviews., • Maintain competency in hydrogen and high-risk operations., • Lead audits, incident investigations, and corrective actions., • Champion a proactive, positive safety culture across the organisation. Key skills and experience required: • Proven experience (minimum 5 years) as a HSE Manager or similar leadership role within a manufacturing, engineering, energy or industrial environment., • Degree in Engineering, Occupational Safety, or related discipline., • NEBOSH Diploma (or equivalent) essential., • Experience in hydrogen, gas processing, chemicals, or oil & gas industries., • Proven experience across design, manufacturing, and site construction/commissioning., • Strong expertise in process safety and major hazard management., • Experience with hydrogen hazards, ATEX/DSEAR compliance, and hazardous area design., • Strong working knowledge of UK safety legislation, standards, and regulatory frameworks., • Comprehensive knowledge of HSE regulations and best practices, including risk assessment and incident investigation., • Demonstrated ability to operate hands-on in an engineering-led workplace., • Experience conducting risk assessments, safety audits, and incident investigations., • Excellent communication and influencing skills at all levels, from shop floor to boardroom., • Strong documentation, reporting, and organisational skills., • Experience developing or improving HSE management systems., • Leadership capabilities, inspiring teams to embrace HSE principles and strive for continuous improvement., • Ability to thrive in a fast-paced environment and adapt to changing business needs. Desirable skills: • Background in process/chemical or mechanical engineering., • Knowledge of electrical systems and components., • Experience with pressure vessel inspection or hydrogen generation/storage systems., • Chartered Membership of IOSH (CMIOSH) desirable., • Previous experience supporting HSE expansion in a scaling engineering organisation.

BBBH25034Commissioning, Maintenance, Installation, Pumps, Motors, 18th, Edition, Level 3, Pumping, stations, electrical, engineering, Installation, Planned, Fault-finding, engineer, Doncaster, Rotherham, Sheffield, Scunthorpe, Barnsely, Lincoln, Hull, Grimbsy If you're interested in this role, click

All applicants are required to have the right to work in the UK.We are seeking a skilled commercial electrician to play a crucial role in the installation, maintenance and repair of solar photovoltaic (PV) systems.You will have a strong background in commercial and utilities electrical work, a passi

EDSB Compliance Solutions are national providers of Fire & Security, Electrical, Mechanical and Building Services. From Design and Specification through to Installation and Maintenance, our focus is to deliver compliance, alongside an unbeatable level of service.

Mechanical Fitter / Welder Fabricator Location: Doncaster, Balby Salary: Up To £49,400 + Overtime (1.5x) Hours: 50 hours per week (7:00am - 5:00pm) The Opportunity We are recruiting on behalf of a well-established industrial business within a heavy plant environment. This is a hands-on role for an experienced Mechanical Fitter / Welder Fabricator who is confident working on large machinery and carrying out heavy-duty welding and fabrication. You will be a key part of the engineering team, helping to maintain and improve plant equipment in a busy, fast-paced setting. Key Responsibilities Maintenance, testing, repair and installation of motors and gearboxes Working on conveyor systems, including bearing maintenance and removal of spill points Carrying out heavy-duty welding and fabrication (MIG & Stick - TIG desirable) Supporting plant improvements and mechanical upgrades Attending breakdowns and completing planned maintenance tasks Working closely with site management to ensure maximum uptime Skills & Experience Time-served Mechanical Fitter / Welder Fabricator Strong background within heavy plant or industrial environments Proven experience with MIG & Stick welding (TIG desirable) Confident working with conveyors, motors, gearboxes and bearings Basic electrical knowledge (advantageous) Proactive, adaptable and able to hit the ground running How to Apply If this role sounds like a good fit, please apply with your CV. Alternatively, feel free to get in touch for a confidential discussion. Email: Direct Line: (phone number removed)

Electrical Site Engineer (Pumps) Location: Doncaster, South Yorkshire (covering surrounding areas) Salary: Competitive + overtime + expenses + benefits Job Type: Full-time, permanent The Opportunity A well-established, market-leading engineering business is looking to recruit an Electrical Site Engineer to join its growing field team. This is a hands-on, site-based role working across Doncaster and the surrounding area, supporting the installation, commissioning, servicing and maintenance of pumping equipment. If you prefer being out on-site rather than stuck behind a desk, this role will suit you down to the ground. The Role • Installation, commissioning and servicing of pumping equipment, • Carrying out electrical work alongside a Mechanical Site Engineer, • Supporting breakdowns and aftersales service when required, • Completing site reports and obtaining customer sign-off, • Ensuring all tools and materials are prepared ahead of site visits, • Working to strict health & safety standards, • Representing the business professionally on client sites, • Communicating effectively with customers and internal teams Requirements Essential: • Electrical qualification (17th or 18th Edition – BS7671), • C&G Level 3 in Inspection & Testing, • Ability to manage workload and prioritise effectively, • Flexible approach to working hours, • Strong team player with a proactive attitude Desirable: • Experience in a field service or maintenance role, • Experience working with pumps or similar equipment, • Confined space training, • First Aid certification, • CSCS card What’s on Offer • Competitive salary + overtime opportunities, • Expenses covered, • Ongoing training and development, • Local work (primarily Doncaster and nearby areas), • Long-term stability with a growing business, • Varied, practical role with real autonomy Apply Now If you’re an electrically qualified engineer looking for a local, hands-on role with solid long-term prospects, apply today

Job Title: Engineering Supervisor Location: Doncaster Stainforth (DN7) Salary: Up to £58,500 (DOE) + Overtime Industry: FMCG Job Type: Permanent, Full Time Shift: Monday Friday: Rotating two-shift pattern (early/late) Hours: 45 Hours Per Week 1 Hour Paid Lunch Per Day Do you have Engineering Supervisory experience in FMCG, Pharmaceutical, Food & Beverage, Chemical, Automotive, Plastics or Packaging environments? If so, this role is for you. About the Company: Our client is a well-established, FMCG organisation and a major employer in the Doncaster region. The business is investing heavily in staff development, upgrading manufacturing facilities, and expanding teams across all departments to support continued growth. Employees benefit from a stable environment with a strong focus on progression and long-term development. Benefits: Clear Career Path to Engineering/ Reliability Management Overtime Available Ongoing training and Funded Qualifications On-site hot canteen facilities No Weekends & No Nights Free on-site parking Company Pension Scheme Employee Assistance and Wellbeing Programmes Key Engineering Supervisor Responsibilities: Supervise day-to-day engineering and maintenance activities across production lines and utilities Ensure Planned Preventative Maintenance (PPM) schedules are completed on time and to standard Respond to equipment breakdowns and prioritise actions to reduce production downtime Support mechanical, electrical, and automation fault-finding and root cause analysis Lead, motivate, and develop a team of multi-skilled engineers on shift Allocate workloads, manage shift handovers, and maintain clear team communication Enforce safe systems of work including permit-to-work and lockout/tagout procedures Ensure compliance with UK Health & Safety legislation Support site safety, hygiene, and audit standards (e.g. BRC) Identify and implement opportunities to improve equipment reliability and efficiency Assist with installation, commissioning, and validation of new machinery and projects Monitor maintenance KPIs and contribute to performance reviews and continuous improvement initiatives Required Engineering Supervisor Responsibilities: Experience in a Supervisory or Senior Engineering role within FMCG or manufacturing Strong mechanical and electrical engineering knowledge (multi-skilled) Experience working with automated or high-volume production equipment Good understanding of UK health & safety requirements within manufacturing Experience with CMMS / Maintenance Management Systems Knowledge of PLC fault-finding and continuous improvement methodologies (TPM / Lean) is advantageous Recognised engineering qualification (NVQ Level 3, HNC/HND or equivalent) (Not Essential) 17 th or 18 th Edition/ Electrical Engineering Qualification (Not Essential) TPBN1_UKTJ

Business: SARIA’s UK operations have a market-leading presence in a wide range of sectors associated with the food chain. The Group’s companies manufacture quality products for use in human and animal foodstuffs, agriculture, aquaculture, and industrial applications. The company also produces biofuels and renewable energy and provides services for farming and the food industry. The company has a UK annual turnover approaching £280 million and employs around 1,000 people at 19 sites across the country The Position Applications are invited for a Shift Electrician to work at our SARIA, Doncaster Site. This is a full-time position, working an average of 42 hours a week, 4 on 4 off 12-hour shifts, both days and nights. As a Shift Electrician your duties and responsibilities will vary based on the Company’s requirements but will include: Ongoing electrical installation works for all industrial applications. Day to day maintenance of all plant and machinery. Conduct risk assessments on all jobs before undertaking any work/tasks. Ensure that all logs and job sheets are filled in as required. Ensure that the working area is clean and tidy on completion of any job/task. To install and maintain new and existing equipment, whilst ensuring production is not interrupted. Assisting other mechanical/operational departments when required. Provide support to the Maintenance Team and cover shifts for holidays/sickness when the business requires. To assist in any other duties as required by Management/site. Ensure that all work is completed to a high standard, whilst complying with the Company’s Health and Safety requirements to ensure the safety of yourself and others. The Person You must have served a recognised Electrician Apprenticeship / Qualification. Have extensive Electrical experience working in a continuous process environment. Be familiar with general factory maintenance practices. Be conversant with basic PLC logic and inverter drives. You must be able to work well individually and has part of a team. Be able to work well under pressure, prioritise workload and meet deadlines, as required. Be able to communicate well at all levels

This is a hands-on technical role for someone who takes ownership of problems and sees them through to resolution. You won’t just log tickets—you’ll diagnose, fix, and follow issues end-to-end. You’ll sit at the centre of operations, bridging installation teams, customers, and manufacturers. The right hire here prevents delays, protects reputation, and keeps systems performing as they should. Key Responsibilities: • Diagnose and resolve faults across solar PV and battery systems, • Provide technical support for systems including Sunsynk, Hanchu, Tesla (Powerwall), and Sigenergy, • Investigate underperformance, faults, communication issues, and system errors, • Liaise directly with manufacturers to escalate and resolve technical issues, • Remotely access systems where possible to diagnose and resolve faults, • Attend customer properties when required to troubleshoot and recommission systems, • Support installation teams with technical queries and commissioning issues, • Interpret system data, logs, and monitoring platforms to identify problems, • Ensure systems are operating safely, efficiently, and within design parameters, • Manage and prioritise support tickets to meet response and resolution targets, • Provide clear updates to customers in plain English (not technical waffle), • Assist with warranty claims and technical documentation The ideal candidate will have: • Strong understanding of solar PV systems, battery storage, and inverter operation, • Hands-on experience with installation, commissioning, or fault finding, • Solid knowledge of system components: inverters, batteries, optimisers, monitoring platforms, • Ability to diagnose electrical and communication faults (AC/DC side), • Comfortable speaking directly with manufacturers and pushing for resolutions, • Ability to work independently and take ownership of problems, • Good customer communication — calm under pressure, no fluff, • Competent with apps, portals, and remote monitoring systems

Static Electrician (Maintenance) Single Site Role | Doncaster Salary: £40,000 + Benefits We are currently recruiting for a Static Electrician to join a leading global Facilities Management provider, working on a secure, long-term contract at a single site location. This is an excellent opportunity to join a well-established organisation offering stability, career progression, and a supportive working environment. The Role As a Static Electrician, you will be responsible for delivering both planned and reactive maintenance across a busy industrial site. Working as part of an on-site engineering team, you will ensure all electrical systems and equipment are maintained to a high standard, supporting the smooth day-to-day operation of the facility. Key Responsibilities - Carry out planned preventative maintenance (PPM) and reactive electrical works - Fault finding, testing, and inspection of electrical systems - Ensure compliance with health & safety regulations and company procedures - Support minor installation and project works when required - Maintain accurate records of all maintenance activities Requirements - 18th Edition Wiring Regulations (essential) - Proven experience in an industrial maintenance environment - Strong fault-finding and problem-solving skills - Ability to work independently on a static site - Good understanding of health & safety practices What's on Offer - Competitive salary of £40,000 - Secure, long-term contract with a global FM provider - Static site - no travel required - Opportunities for training and career progression - Supportive and professional team environment RG Setsquare is acting as an Employment Agency in relation to this vacancy

Multi-Skilled Electrician Location: DN11 Contract Dates: 30 April 2026 to 30 July 2026 Pay Rate: up to £25 per hour umbrella paye Static site The Role: An opportunity has arisen for a Multi-Skilled Electrician to work on a large, business critical site in Doncaster. The role will involve carrying out planned preventative maintenance and reactive electrical works across building services and plant. You will also support small installation works and respond to site engineering emergencies where required. Key Responsibilities: * Planned preventative maintenance and reactive electrical maintenance * Fault finding and repairs on building electrical systems * Small electrical installation works * Working on business-critical equipment * Ensuring all work are completed in line with health and safety standards * Accurate completion of maintenance records and documentation Skills and Experience Required: * Recognised Electrical qualification * City and Guilds 18th Edition * City and Guilds Test and Inspection * Strong knowledge of building electrical systems including power, BMS, emergency lighting and fire alarms * Experience delivering structured PPMs * Strong health and safety awareness * Ability to manage electrical systems documentation Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk TPBN1_UKTJ

Field Service Engineer (Pumps / Electrical) £35,000 - £42,000 (OTE £45,000 - £55,000) + Manufacturer Specific Training + Lots of Overtime + On Call + Company Van + Fuel Card+ Company Bonus + Overtime + Company Benefits Doncaster - Yorkshire and Lincolnshire Patch (some further travel) Are you an Electrical Field Service Engineer with 230V/400V three-phase, DOL and ASD experience, Level 3 Inspection and Testing, ready for a hands-on regional patch with a leading pump manufacturer offering specialist training, on-call, and serious overtime potential? This UK manufacturer, with a £21 million turnover, supplies innovative pumping and fluid handling solutions to the construction, utilities, housing, and wastewater sectors, built on over 65 years of engineering excellence, reliability, and customer-focused service trusted by local authorities, developers, and contractors nationwide. In this role, you will install, commission, and maintain pumps and pumping stations at sites across Yorkshire and Lincolnshire, supporting planned maintenance. You'll prepare materials, complete site reports, follow health and safety procedures, and work closely with customers and internal teams. The role is Monday to Friday with national travel and weekly overnight stays. This role would suit an Electrical Engineer with 18th Edition certification seeking varied field work, manufacturer specific training with the opportunity to boost earnings through overtime and a company bonus. The Role: Install, commission, and maintain pumps, motors, and pumping stations. Carry out planned maintenance on Pumping Systems Prepare materials and tools before site visits. Monday - Friday 40 hour week The Person: Electrical qualification to 17th or 18th Edition Holds Level 3 Inspection and Testing Experience with 3-phase power supplies - 230V and 400V, DOL and ASD Full UK driving license and happy to travel Reference: BBBH25034 Commissioning, Maintenance, Installation, Pumps, Motors, 18th, Edition, Level 3, Pumping, stations, electrical, engineering, Installation, Planned, Fault-finding, engineer, Doncaster, Rotherham, Sheffield, Scunthorpe, Barnsely, Lincoln, Hull, Grimbsy If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Our client is a successful and well-established manufacturer. They are looking for an experienced Auto Electrician to work on the electrical aspects of vehicle manufacture / conversion. They are looking for people that are used to working with hand and power tools, and that can follow diagrams, schematics and instructions with precision. PLEASE ONLY APPLY IF YOU ARE AN EXPERIENCED / SENIOR AUTO ELECTRICIAN Responsibilities: * Research electrical faults. * Repair and replace electrical items. * Understand and be able to fit; Tail Lifts, Towbars, Beacons, and any extra lights inside and out on panel vans or chassis. * Installation and fitting of electrical systems, including; alarms, immobilisers, tracking, parking sensors, split charge systems, welfare heating, water, and power systems. * General upkeep of the workshop and premises to aid with the smooth running of the workshop and conversion of vehicles. * Installations should be to a high standard. * This role covers all duties in the workshop electrical department, and can involve mentoring. Requirements: * Good working knowledge of vehicle Electrics and a proven background as an Auto Electrician is essential. * Have the basic tooling and be able to use hand and power tools. * Work methodically and pay close attention to detail. * Ability to read electrical diagrams. * Flexible as work can be varied. * Have own tools and also be able to look after and care for any company tooling and equipment used. * Be competent at working alone or as part of a team. Salary: £30,000 - £33,000 depending on experience. Hours of work: 4 day week! Monday to Thursday, 6:30am to 5:00pm, 40 hour week. Benefits: * Free parking * Gym membership * Health & wellbeing programme * On-site parking This job would suit someone with a background in Automotive Electrics, e.g. Automotive Electrician / Electrical Assembler / Coach Builder / Automotive Electrician / Vehicle Conversion Operative / Electrical Engineer / Electrical Technician / Electrical Assembly Operative / Electrical Fitter / Electrical Engineer / etc

Engineering Supervisor Location: Coulman Road, Thorne, Doncaster, South Yorkshire Salary: £56,000 per annum (Rising to £58,500 per annum after probation) Hours: Rotating shifts Monday to Friday with weekend OT available (Shifts usually from 5am, 9 hours with an hour paid for lunch. Rotating shift with 2pm until 9 hours for the back shift. One week of earlies rotating with one week of lates) The Engineering Supervisor is responsible for leading and coordinating engineering activities to ensure the safe, efficient, and reliable operation of production equipment within a food manufacturing environment. The role focuses on minimising downtime, maintaining high food safety and quality standards, and supporting continuous improvement across the site. Duties: Engineering & Maintenance Supervise day-to-day engineering and maintenance activities across production and utilities. Ensure planned preventative maintenance (PPM) schedules are completed effectively and on time. Respond to breakdowns, prioritising actions to minimise production downtime. Support fault-finding and root cause analysis on mechanical, electrical, and automation issues. Ensure all equipment is maintained in line with manufacturer guidelines and site standards. People Management Lead, motivate, and develop a team of engineers on shift. Manage breakdowns effectively utilising resources to minimise downtime impact on the business. Allocate work, manage shift handovers, and ensure effective communication within the team. Support training, coaching, and competency development of engineering staff. Promote a positive safety culture and ensure team compliance with site policies. Health, Safety & Compliance Ensure all engineering work is carried out in compliance with UK health & safety legislation, including PUWER and LOLER. Enforce safe systems of work, including permit-to-work and lockout/tagout procedures. Support food safety, hygiene, and BRC / GFSI standards within engineering activities. Participate in audits and inspections as required. Continuous Improvement & Projects Identify and implement opportunities for improving equipment reliability and efficiency. Support continuous improvement initiatives such as TPM and lean manufacturing. Assist with installation, commissioning, and validation of new equipment and projects. Monitor maintenance KPIs and contribute to performance reviews. Skills & Experience Essential Proven experience in a supervisory or senior engineering role within food manufacturing or FMCG. Strong mechanical and electrical engineering knowledge. Experience with automated production lines and manufacturing equipment. Ability to lead and manage teams effectively. Good understanding of health & safety and food safety requirements in the UK. Desirable Recognised engineering qualification (NVQ Level 3, HNC/HND, or equivalent). Electrically biased qualification (17/18th edition etc). Experience working with CMMS systems. Knowledge of PLC fault-finding. Familiarity with continuous improvement or TPM methodologies. Personal Attributes Hands-on, proactive approach with strong problem-solving skills. Calm and organised under pressure. Strong communication and leadership abilities. Committed to safety, quality, and continuous improvement. Key Skills & Competencies High attention to detail and commitment to compliance. Excellent problem-solving and analytical skills. Strong team management and communication abilities. Effective communication with internal teams. Ability to work under pressure and manage time-sensitive deliveries. Qualifications & Experience Recognised engineering qualification (NVQ Level 3, HNC/HND, or equivalent). Experience working with CMMS systems. Knowledge of PLC fault-finding. Familiarity with continuous improvement or TPM methodologies. Proven experience in Engineering within the food industry. In-depth understanding of food safety, hygiene, and traceability requirements. To Apply If you feel you are a suitable candidate and would like to work for Chesterfield Poultry, please don’t hesitate to apply

Electrical Engineer – days only - Doncaster – up to £19.5p/hr + overtime + expenses. Overview: Our client is an engineering business that supply machinery and equipment to customers across the UK and internationally. This role offers the opportunity to work in a hands-on service environment, supporting customers through the installation, commissioning, maintenance and repair of specialist equipment. We would like to hear from you if you are an experienced electrical engineer happy to work in house and on customers’ sites. The role: Working closely with customers, engineering and production teams in a role where technical expertise, safety and customer satisfaction genuinely matter. It’s an ideal role for an electrical engineer who enjoys variety, problem-solving and working on site, installing, commissioning, servicing and fault-finding on electrical systems and equipment. The role supports operational delivery by ensuring equipment operates safely, reliably and in line with customer and business requirements. Requirements: It is essential that applicants have a recognised electrical qualification (e.g. City & Guilds / NVQ Level 3 in Electrical Engineering or equivalent) along with proven experience in an electrical service, installation or maintenance role. You will have experience working with machinery, control panels or automation systems and the ability to fault-find on industrial or commercial electrical systems. Ideally you will have completed 18th Edition and have commissioning experience. Benefits: Salary: As well as a salary of up to £42,588k (19.50p/hr), depending on experience, skills and abilities, the electrical engineer can expect overtime to be paid at x1.5 over 42 hours and x2 on Sundays, all expenses paid plus: Hours of work: Monday to Thursday: 8am – 5pm, finishing at 4.30pm on Fridays. Holidays: Up to 34 inc. over 5 years (20 days plus your birthday, plus bank holidays and an additional day for every completed 12 mths of the holiday calendar year, up to a maximum of 25 Days). Extras: Regular company social events, including a summer BBQ, Christmas brunch etc. Access to an Employee Assistance Programme for confidential support and wellbeing advice. Discounted gym memberships to support health and wellbeing. Death in Service cover. Free on-site parking Travail Employment Group is acting as an employment agency in this instance

The Redline Group is working in partnership with a UK based engineering organisation to recruit two Contract Rail Installation Engineers - Doncaster, to support a live rolling stock upgrade programme starting this summer. This is a hands on, depot based installation contract due to commence mid June, running through to the end of November, with a planned break before further works recommence in the new year. The work will be primarily based at a rail depot in Doncaster, with the potential for occasional travel to another depot near Stoke depending on train availability. All work is day shifts, depot based only. The successful contractor will support the installation of on train CCTV systems and roof mounted antennas, working as part of a small installation team alongside in house engineers. Product specific training will be provided. Key Skills Required for the Contract Rail Installation Engineer - Doncaster Electrical or electro mechanical installation experience on rolling stock or rail vehicles Comfortable working in rail depots and on train vehicles Hands on installation and fitting background Strong awareness of safe systems of work in regulated environments This role has an indicative OUTSIDE IR35 determination therefore we can accept candidates who would like to operate through their own PSC. For more information or to apply for the Contract Rail Installation Engineer - Doncaster opportunity, please contact Maddie Ramsden - (url removed) / DDi: (phone number removed) quoting reference MMR1061

About the role: Our client are seeking to appoint an experienced B1 Licensed Engineer for their Maintenance Organisation team to take on the role of B1 Base Certifying Engineer. Reporting to the Maintenance Support Manager the role is responsible for the satisfactory completion and certification of all work packages/packs assigned by the work specification (Maintenance Contract/Work Order and approved MOE procedures). Essential Skills & Experience: Supervision of non-licensed personnel Removal or installation of aircraft components as required Support with mechanical or electrical removals and installations as needed Certifying B1 Base/Modification work completed on our Beech 200 and 300 aircraft For ensuring that Maintenance Organisation procedures and standards are complied with when carrying out maintenance. For understanding the documentation, including ADs and SBs and other linked data required to certify tasks. Recording and notifying of any inaccurate, incomplete or ambiguous procedure, practice, information or maintenance instruction contained in the maintenance data used by maintenance personnel to the Head of Maintenance. Providing feedback to the Head of Maintenance on suggested improvements, efficiencies and ways to enhance the way in which we work under the MOE. Where required, oversight of junior staff members, engineers/technicians where appropriate, providing input to the appraisals of junior members of staff and day-to-day management. Supporting the development and delivery of the company's strategic plan. Actively contributing to the safety management system and general promotion of aviation safety.The Ideal Candidate will have the following: The ideal candidate for this role will have an unrestricted UK CAA Part 66 B1 Licence (Beechcraft King Air 200 or 300 type ratings desired, however not essential - type training will be provided), with recent demonstratable experience on both types. Be an excellent team player and communicator, that can articulate your thoughts concisely and politely. You must have good attention to detail and be able to work under pressure and to deadlines

Role: Site Installation Engineer – Bulk Materials Handling & Process Plant Projects ** Salary: £51,000 (based on 40hrs p/w) - OTE £67,500 - £80,000p/a + OT + Van + Package Location: Flexible – South Yorkshire / Derbyshire / Lincolnshire / Midlands / North England Employment Type: Permanent The client Our client is a UK-based engineering, installation and construction organisation specialising in bespoke bulk materials handling systems and full process plant solutions. Their expertise covers the full project lifecycle – from initial design engineering, and technical consultation through to EPCM/EPC contracts, construction, installation, commissioning, and long-term maintenance. They deliver solutions for clients across mining, cement, aggregates, food, alternative fuels, biomass, steel, infrastructure, and ports, both in the UK and internationally. This is an exciting opportunity to join a team with decades of experience and play a key role in delivering large, complex projects across multiple industries. The Role We’re looking for a motivated and ambitious Site Installation Engineer to oversee projects across the UK and Europe, including steel structures, conveyors, storage facilities, and industrial plant installations. The Site Installation Engineer will report to the Construction Director and take ownership of multi-disciplinary teams (mechanical, structural, electrical, and civil), ensuring safe, efficient, and high-quality delivery. Key Responsibilities: * Lead site installation activities across steel structures, conveyors, and plant process assembly. * Ensure compliance with Zero Harm policies, CDM, and HSE standards. * Review and approve subcontractor RAMS, Scope of Works, and Lift Plans. * Manage daily/weekly site planning, reporting progress, and maintaining schedules. * Issue and control site permits (Hot Works, Working at Height, etc.). * Supervise and motivate teams to deliver on time, within budget, and to the required quality. * Coordinate logistics for site deliveries, plant, and resources. * Conduct toolbox talks, site audits, and client/contractor meetings. * Resolve site issues relating to quality, safety, and client satisfaction. Construction installations may involve 10-12-hour days and working at weekends at times of busy periods. The candidate We’re seeking someone confident, proactive, and comfortable making decisions in a dynamic site environment. Essential qualifications & experience: * HNC/HND (or equivalent) in an engineering/technical discipline. * CSCS Black Card, SMSTS/SSSTS qualified & First Aid at Work (3-day). * 5–10 years’ experience as a Site Installations Engineer in construction/heavy engineering. * Strong background in steel construction, conveyors, and large plant assembly & commissioning industrial plant. * Skilled in reviewing and authoring RAMS, Lift Plans, and construction documentation. * Proficiency in MS Office; ability to read and interpret engineering drawings (AutoCAD etc) * IOSH/NEBOSH certification & Knowledge of ATEX/DSEAR, ISO 9001 & 14001 (desirable) Personal qualities: * Strong multi-tasking and prioritisation skills, excellent communication – with clients, teams, and stakeholders. * Ability to motivate teams and get the best out of people. * Attention to detail, with a focus on delivering safely, on time, and to spec. * Flexible to travel UK wide Package & Benefits * Salary: £51,000p/a (based on 40hr standard week) * Expected 10hr days OTE £67,500 - £80,000 * Van + fuel card * Pension 13% (7.5% employer / 5.5% employee) * Death in service x2 salary * 25 days holiday + bank holidays (3 days reserved for Christmas/New Year) * Laptop & mobile phone * Employee Assistance programme for wellbeing & support Interested? Send your CV to the G Force Recruitment team via CV Library. One of our specialist consultants will be in touch shortly. We take your data seriously. G Force Recruitment is fully compliant with the UK GDPR and Data Protection Act 2018

Business: SARIA's UK operations have a market-leading presence in a wide range of sectors associated with the food chain. The Group's companies manufacture quality products for use in human and animal foodstuffs, agriculture, aquaculture, and industrial applications. The company also produces biofuels and renewable energy and provides services for farming and the food industry. The company has a UK annual turnover approaching £280 million and employs around 1,000 people at 19 sites across the country The Position Applications are invited for a Shift Electrician to work at our SARIA, Doncaster Site. This is a full-time position, working an average of 42 hours a week, 4 on 4 off 12-hour shifts, both days and nights. As a Shift Electrician your duties and responsibilities will vary based on the Company's requirements but will include: Ongoing electrical installation works for all industrial applications. Day to day maintenance of all plant and machinery. Conduct risk assessments on all jobs before undertaking any work/tasks. Ensure that all logs and job sheets are filled in as required. Ensure that the working area is clean and tidy on completion of any job/task. To install and maintain new and existing equipment, whilst ensuring production is not interrupted. Assisting other mechanical/operational departments when required. Provide support to the Maintenance Team and cover shifts for holidays/sickness when the business requires. To assist in any other duties as required by Management/site. Ensure that all work is completed to a high standard, whilst complying with the Company's Health and Safety requirements to ensure the safety of yourself and others. The Person You must have served a recognised Electrician Apprenticeship / Qualification. Have extensive Electrical experience working in a continuous process environment. Be familiar with general factory maintenance practices. Be conversant with basic PLC logic and inverter drives. You must be able to work well individually and has part of a team. Be able to work well under pressure, prioritise workload and meet deadlines, as required. Be able to communicate well at all levels TPBN1_UKTJ

Who are we? Polypipe Building Products are focused on delivering solutions to the residential sector. Polypipe Building Products works with national and local developers, plumbing and heating engineers, general builders and groundworkers to deliver above and below ground drainage systems, rainwater solutions as well as hot and cold plastic plumbing products. Join our Mason Pinder Toolmakers site, in Thorne, DN8. About the role: You will be responsible for the repair, maintenance and improvement to all tooling in line with production and customer requirements to maintain a fit for purpose condition. You will support new tooling for new product introductions to ensure the robustness of product builds and development of onsite spares to support moulds and production needs. Your day to day: * Contribute to a strong culture which prioritises health and safety, encourages continuous improvement and delivers product to strict quality criteria. * Manufacture, modification, repair, and refurbishment (up to 15 tonnes) of tooling across the Genuit Group. * Manufacture and development of EOAT * To manufacture spare parts, both to drawing and through means of using own initiative. * To inspect externally manufactured components to drawing and check compatibility to existing moulds * Following engineering drawings to measure and mark out the design for the tool. * Using machinery such as lathes, presses, milling machines and grinders to cut and shape the tools. * Monitoring the tools used in production/manufacturing to ensure efficient run rates and identify necessary repairs or possible improvements. * Check and measure parts with use of precision measuring devices to assure quality specification and record quality check. * To ensure manufacturing adheres to and conforms with the required technical and quality specifications in line with the Company’s ISO 9000 quality systems * Support the development of 5S activities to maintain the highest levels of hygiene and housekeeping. * Support lean manufacturing programme in conjunction with the Continuous Improvement team. Skills & Experience we require: * Apprentice trained engineer/toolmaker with recognised qualifications. * Knowledge of manufacturing, tooling, cutting tools, and machine parts. * Ability to manufacture a variety of replacement parts, from angle pins to new inserts. * Strong understanding of manufacturing new tooling from detailed technical drawings. * Good understanding of CNC, EDM machining. * Possess metallurgical skills, knowledge of strength of materials. * Ability to follow technical detailed drawings and instructions. * Knowledge or ability to use 2D and 3D computer aided design and manufacturing software (CAD/CAM) * Use recognised problem solving techniques to analyse tooling problems. * Working knowledge of project management. * Hot runner electrical and installation knowledge. What we can offer you: * £18.55 per hour * Monday - Friday 8:00am until 4:00pm * 25 days of annual leave plus the bank holidays * Matched pension contributions up to 8% * Sharesave scheme * Team days and events * Life assurance Want to know more? Apply now or call to speak to our Resourcing Business Partner on (phone number removed). We can't wait to hear from you

A client of ours are looking for an Electrical Site Manager for their utility-scale BESS project in the West Yorkshire area to supervise and oversee 33kV cable installations. To supervise and oversee 33kV/LV cable installation. Efficient management skills to drive and deliver cable installation work

We are seeking a skilled and reliable Electrical Installation Engineer to join a growing engineering team, delivering high-quality electrical installations across a range of projects throughout the UK. Installation of electrical control panels and cabe management systems. Working from electrical dra

Electrical Installation Technician (LV / Control Panels) £45,000 - £50,000 + Training + Progression to Approved + Overtime + Bonus + Enhanced Holidays + Company Benefits.

You will learn on the job alongside experienced electrical engineers, gaining practical experience in installation, testing, inspection, fault finding, and maintenance of essential electrical systems. Apprentice Electrical Installation Engineer. As an Apprentice Electrical Installation Engineer at G

Are you an experienced Electrical Installation Technician - Midlands with a background in vehicle electrical systems and onboard technology? This is an exciting mobile opportunity to work on a wide range of vehicles, delivering advanced onboard systems for fleet and public transport applications acr

A leading construction firm is seeking an Electrical Installation Technician to work across various sites in England. This role involves installing, commissioning, and troubleshooting electrical systems. Candidates should have relevant electrical qualifications, experience, and strong communication

The role involves installing and maintaining electrical installations, addressing customer service requests, and adhering to safety protocols. Candidates should have a diploma in Electrical Engineering, at least 2 years of relevant experience, and a full driving license. A leading electrical service

Electrical Installation Engineer, Field Engineer, Traffic Management Systems, Electrical maintenance, Automated Security Systems, Installation Engineer, Electro-technical Engineer, Vehicle Control Systems. Are you an experienced Electrical Installation Engineer looking for your next challenge? Join.

Trainer in Electrical Installation. As a Trainer in Electrical Installation, you will guide apprentices through both practical training and theoretical learning, supporting their progress at every stage. A Level 3 (or higher) qualification in Domestic and Commercial Electrical Installation.

A leading Group Training Association is seeking an experienced Electrical Installation Instructor based in Hull.

We are recruiting a Teacher of Electrical to join our Building Services team based at our historic Roundhouse Campus in Pride Park, Derby. Within this role you will be pivotal to the success of the Electrical team within the Building Services provision delivering to students from across the East Mid

This is a site‑based Electrical Installation role where you'll take ownership of installs, testing, and commissioning across industrial projects, with a focus on:. Carrying out electrical installations in line with 18th Edition regulations. City & Guilds Level 3 in Electrical Installation (or equi

Electrical Installation Manager - Commercial Solar & Intelligent Lighting. A leading renewable energy specialist is looking for a hands‑on Electrical Installation Manager to join their growing team. This role offers the chance to lead installations of commercial solar PV systems and intelligent li

Apprentice Electrical Installation Engineer.

Proven background in industrial electrical installations (utility, plant, or heavy commercial). As part of our critical Network and Information Systems (NIS) project, we are seeking a skilled and safety-conscious Electrical Installation Technician. Manage the movement of heavy equipment (cabinets, U

Electrical Installation Lecturer. South Thames College is seeking an experienced Electrical Installation lecturer to deliver outstanding quality in teaching, learning, assessment, and tutorial support to students, to maximise achievement.

A leading educational institution in Greater London is seeking a passionate Lecturer in Electrical Installation to join the Construction team. The successful candidate will deliver high-quality teaching and assessment on City & Guilds Electrical Installation programmes, engaging with both 16-18 lear

A leading technology company in the UK seeks an experienced Electrical Installation Technician to work on vehicle electrical systems. The ideal candidate has proven experience with motor vehicle electrical systems and excellent communication skills.

As an Electrical Installations Tutor you will deliver practical and theoretical electrical training aligned with company and awarding organisations' guidelines. Deliver high‑quality electrical installation subjects consistently. Recent relevant industry experience in domestic, commercial, and/or i

You will learn on the job alongside experienced electrical engineers, gaining practical experience in installation, testing, inspection, fault finding, and maintenance of essential electrical systems across the prison estate. Apprentice Electrical Installation Engineer Wandsworth. Apprentice Electri

Are you an experienced electrical professional ready to take your career in a new direction and inspire the next generation? Chichester College is looking for a Lecturer in Electrical Installation to join our forward‑thinking team. Lecturer in Electrical Installation. Chichester College is appoint

You will support and manage electrical installation projects from quotation through completion, coordinate resources and subcontractors, and ensure compliance with safety and quality standards. Prepare and present commercially viable quotes and support delivery of industrial electrical installation

Are you an experienced electrical professional looking for variety, travel, and the chance to work on exciting projects across England? At Lintott (a Galliford Try business) we’re seeking a hands‑on Electrical Installation Technician to help deliver high-quality installations and commissioning f

Auto Mate Systems Ltd is looking for an experienced Electrical Installation Engineer in Hyndburn, United Kingdom. The role involves installing, testing, and maintaining electrical systems across the UK. Candidates should ideally have relevant electrical qualifications and be flexible to travel.

A professional training organization is seeking a full-time Trainer in Electrical Installation in East Yorkshire. Candidates must possess a Level 3 qualification in Electrical Installation and relevant industry experience, with additional benefits such as access to excellent training, a gym membersh