Electronics jobs in Oxford - Page 2Create job alerts

Key responsibilities include designing data acquisition systems, providing on-site support during testing and racing events, and collaborating with engineers on vehicle electronics.

The role is suited for graduates with optics, lasers, or electronics experience.

Electronics, Electrical Engineering, or a related discipline. Electronics Engineer or similar role. An innovative engineering organisation operating in advanced and challenging environments is seeking an.

Manufacturing Technology Centre in Oxford is looking for an Engineering Trainer to manage and deliver innovative teaching and learning experiences in Mechanical and Electrical engineering.Your role will include effective training delivery, developing assessment resources, and providing feedback to l

A leading instrumentation technology firm in Oxford is looking for a skilled Manufacturing Technician to assemble, test, and refurbish advanced instruments.The role requires strong assembly skills, excellent communication, and a commitment to continuous improvement.Candidates should have relevant in

Technical Buyer | Space Electronics 🚀📍 Harwell, Oxfordshire | 4 days on-site / 1 day WFH💷 £45,000 – £60,000 + benefits🛰️ Permanent 🔧 The RoleA leading spac

Key skills required for the Contract Power Electronics Engineer position based in Oxfordshire:- Experience with Orcad for schematic capture- Experience linear control systems- Experience of working on low voltage - high accuracy electronics, d

A leading gas detection firm is recruiting an Electronics Field Service Engineer based in Sheffield/Rotherham. No prior experience in gas detection is necessary as full training will be provided. Responsibilities include maintaining and servicing electronic gas detection equipment, providing excepti

A leading UK technology firm is seeking an experienced Principal Electronics Engineer in Oxford. The role involves the design and delivery of advanced electronics for scientific instrumentation, requiring strong skills in analogue and digital design.

Senior ECU & Electronics Hardware Engineer.Advanced EV, Battery & Powertrain Systems.We are recruiting a Senior ECU & Electronics Hardware Engineer to join a established engineering organisation developing next‑generation electric powertrain and battery technologies.This role sits at the intersect

Electronics Field Service Engineer – Based Sheffield / Rotherham – M1 Corridor - £41,000 starting salary plus overtime package**is looking to recruit to the Field Service department an Electronics Field Service Engineer to maintain, repair and commission gas detection equipment. Field Service E

Ernest Gordon Recruitment is seeking a Junior Electronics Engineer in Abingdon.

A global Electronics organisation is seeking a Tier 1 Infrastructure Engineer to support on-premise infrastructure with a focus on end-user devices. Responsibilities include supporting infrastructure, maintaining documentation, and ensuring security best practices.

Crowcon is looking for a Line Support Technician in Abingdon, UK to join their Production department. The successful candidate will support production processes by providing technical support, troubleshooting, and improving assembly equipment.

Collaborate with engineers and technicians to integrate data systems with vehicle electronics and powertrain components.

Our client has a permanent opportunity for a Scientific Product Specialist. They provide automation and fluid control solutions for factory and laboratory applications. This is a National role, working remotely, with travel required. As a key member of their talented and successful products team this is an interesting, varied, and challenging customer-facing role that is designed to support increase their market share. Working closely with the field sales team you will provide application, product knowledge and sale support during customer visits. The range of product focus include chillers, heat exchangers, sensors, media separated valves, clean wet pumps, and process gas controls. To be considered you will need to demonstrate customer facing technical and sales experience. Key Responsibilities: Maintain accurate records of activities using our CRM system Grow sales of the product range through supporting the salesforce and their customers Understand and have the ability to use the value proposition of the product range responsible for and business value to grow sales. Identifying, researching, and gaining application knowledge for new opportunities for the product Promote the product range responsible for by creating marketing material, training material, and identifying trade shows where the range will achieve exposure. Develop strong working relationships with internal and external customers consulting with them to solve problems from a technical perspective. Meet and exceed targets. Skills and Experience: Desirable : A degree within a Science or Engineering discipline Required: HND or equivalent or relevant experience Proven track record of selling, specifying, or developing the product range of chillers, heat exchangers, sensors, media separated valves, clean wet pumps and process gas controls. Experience, skills and knowledge of the types of applications found in the non-invasive life science / medical / electronics industry, as these are the types of market areas, you will be working in. Demonstrate an ability to communicate and influence effectively at all levels of the business. Highly driven and passionate about making a difference within the industry. Proven track record of using value propositions to ensure customer satisfaction, increasing retention and customer loyalty to a brand. Full UK Driving Licence Current passport as European travel may be required. Due to the large number of responses we receive it is not always possible to respond to every application straight away. Should your skills and experience be a match for this role, or any other vacancy we may have, we will normally contact you within 72 hours of receiving your application. If you wish to apply for further roles please do so

Senior Assembly Technician | Oxford | £35,000 - £45,000 My client is a leading organisation in the space sector, known for delivering cutting-edge mission technology and supporting high-profile international space programmes. They are seeking a Senior Assembly Technician to join their team. The Role As a Senior Assembly Technician, you will play a key role within the Assembly, Integration and Test (AIT) function, supporting the build and integration of high-precision space hardware. Key Responsibilities +Assemble and integrate mechanical and electrical components, sub-assemblies, and systems in accordance with technical drawings and work instructions +Perform electrical wiring, cable harnessing and connector terminations to recognised industry standards (e.g. IPC-A-610, IPC-A-620) +Carry out soldering and rework activities in line with IPC-J-STD-001 +Create and maintain risk assessments +Accurately record test data and complete all required project and quality documentation Key Skills and Experience: +ONC / HNC / NVQ Level 3 (or equivalent) in Electrical, Mechanical or Electronic Engineering, or equivalent practical experience +510 years experience in a hands-on assembly, integration or test role, ideally within aerospace, defence or electronics +Strong practical skills in mechanical fitting, wiring and assembly +Ability to read and interpret technical drawings, schematics and wiring diagrams +Experience using hand tools, torque tools and test equipment (e.g. multimeters, oscilloscopes) This is an exciting opportunity to join a growing international organisation at the forefront of space innovation. If you are passionate about precision engineering and want to contribute to ambitious space missions, we would love to hear from you. TPBN1_UKTJ

Rail Survey Systems Technician | Field Systems Engineer | Technical Survey Equipment Specialist The Opportunity Our client is offering an exciting opportunity for a Rail Survey Systems Technician to join a highly skilled technical team supporting innovative survey and data capture systems used across large-scale infrastructure environments. This is a role for someone who enjoys variety, combining workshop preparation, field deployment, and international travel, while playing a critical part in ensuring complex systems perform at their best. You will become the vital link between field teams and technical operations, working with advanced equipment and contributing to projects that deliver meaningful, real-world insights. Why This Role is Great This is far more than a support position. It is an opportunity to take ownership, build expertise, and make a tangible impact: • Get hands-on with high-performance survey and data acquisition systems, • Play a key role in testing, optimising, and deploying technical equipment, • Travel internationally and experience diverse working environments, • Develop expertise in installation, commissioning, and fault-finding, • Work closely with experienced engineers and technical specialists About You This role is ideal if you enjoy working at the intersection of engineering, technology, and field operations. You might already have experience in technical systems, or you may be looking to build on a strong foundation in electronics or engineering. Either way, you will have the chance to develop your skills in: • Electronic and mechanical systems, • Survey or sensor-based technologies, • Data acquisition and system integration, • Troubleshooting in real-world environments, • Working across workshop, office, and field settings You will also enjoy working in varied conditions, from controlled environments to remote or operational sites, and be comfortable travelling when needed. Your Experience (Wishlist) We are keen to hear from candidates who bring a mix of the following: • Experience with technical equipment, instrumentation, or electronic systems, • Exposure to installation, field service, or system deployment, • Confidence in fault-finding and diagnostics, • Familiarity with data systems, sensors, or communications protocols, • A background in engineering, electronics, or a related discipline Most importantly, you are curious, practical, and motivated to learn. Important Requirements • Right to work in the UK (no sponsorship available), • Full UK driving licence, • Willingness to travel and work flexibly when required Diversity & Inclusion Our client and our agency are committed to building inclusive workplaces where everyone feels valued and supported. We welcome applications from individuals of all backgrounds, experiences, and perspectives, and believe diversity drives innovation and success

Position: Electronics Hardware Design Engineer Location: Abingdon, Oxfordshire Salary: £40,000-£45,000 pa Employment: Permanent – F/T Are you a creative problem solver who enjoys the physics and mathematical challenges design brings? We seek an Electronics Hardware Design Engineer with a passion for the design of embedded systems and automatic test equipment. This all-encompassing role will focus your responsibilities on the design and development of Digital and Analogue circuits for a variety of innovative projects. Reporting to the Technical Manager your technical input will require you to have a good level of understanding of electronic hardware and embedded software principles. You’ll have experience of • Designing Digital and Analogue Electronic circuits, • Using Analogue to Digital converters (ADC's), 16/24-bit types, • Embedded Software development, • Using 16/32-bit Microcontrollers (PICS / MSP430 / Cortex), • Using Schematic Capture & PCB layout tools, • A good, working knowledge of using Op Amp Circuits, Oscillator Circuits An understanding of Low Noise design techniques, • Electro-Mechanical Principles (using Motors, Actuators & Sensors) Desirable Requirements • Experience with using PLC's (Programmable Logic Controllers) and writing programs either in Ladder Logic or Structured Text., • Experience with using LabVIEW software and hardware under the National Instruments eco system., • A reasonable knowledge of Control Systems Engineering, • A good understanding of Test & Measurement Principles, • Experience championing initiatives that will reduce our carbon footprint and development costs. Benefits • 28 days annual leave, • Pension, • Onsite Gym facilities, • Restaurant / Sandwich bars and coffee shops on site., • Free Parking. Direct train and bus services., • Additional training opportunities

Production Technician, £26,000 - £28,000, Abingdon, Oxfordshire £26,000 - £28,000 depending on experience + pension + 25 days holiday Full-time, permanent position. Manufacturing role within a growing medical device company Are you a hands-on Production Technician, Assembly Operative or Development Technician with experience in a clean, regulated manufacturing environment? Your background as a Production Technician: Experience working with small components ideally in medical, electronics, or precision manufacturing Able to follow detailed written instructions and complete accurate production records Confident working under a microscope or with intricate components A methodical approach reliable, process-driven, and comfortable working to high quality standards Any experience with ISO 13485, GMP, or GLP is beneficial but not essential Good communication skills and a team-first attitude. Production Technician responsibilities: Assemble medical devices to precise specifications, following SOPs Carry out detailed production tasks under a microscope where required Record data clearly and accurately during manufacturing and product testing Maintain a clean and organised work area, ensuring equipment is cleaned, calibrated and ready for use Support product development by building prototypes and performing performance testing Assist with technical support for suppliers and internal teams Contribute to documentation, including work instructions and process records. This Production Technician job is commutable from Abingdon, Witney, Didcot, Wantage, Oxford, Oxfordshire and surrounding areas. To apply, please send your CV to Sam Hilton at Euro Projects Recruitment Ltd. Please note that if you are not contacted within ten working days, your application has not been successful. This vacancy is posted by Euro Projects Recruitment specialists in engineering and manufacturing careers TPBN1_UKTJ

Manufacturing Technician, £26,000 - £28,000, Abingdon, Oxfordshire £26,000 - £28,000 depending on experience + pension + 25 days holiday Full-time, permanent position. Manufacturing role within a growing medical device company Are you a hands-on Manufacturing, Production Technician, Assembly Technician or Development Technician with experience in a clean, regulated manufacturing environment? Your background as a Manufacturing Technician: Experience working with small components ideally in medical, electronics, or precision manufacturing Able to follow detailed written instructions and complete accurate production records Confident working under a microscope or with intricate components A methodical approach reliable, process-driven, and comfortable working to high quality standards Any experience with ISO 13485, GMP, or GLP is beneficial but not essential Good communication skills and a team-first attitude. Manufacturing Technician responsibilities: Assemble medical devices to precise specifications, following SOPs Carry out detailed production tasks under a microscope where required Record data clearly and accurately during manufacturing and product testing Maintain a clean and organised work area, ensuring equipment is cleaned, calibrated and ready for use Support product development by building prototypes and performing performance testing Assist with technical support for suppliers and internal teams Contribute to documentation, including work instructions and process records. This Manufacturing Technician job is commutable from Abingdon, Witney, Didcot, Wantage, Oxford, Oxfordshire and surrounding areas. To apply, please send your CV to Sam Hilton at Euro Projects Recruitment Ltd. Please note that if you are not contacted within ten working days, your application has not been successful. This vacancy is posted by Euro Projects Recruitment specialists in engineering and manufacturing careers TPBN1_UKTJ

Redline has an extraordinary opportunity for multiple a Contract Vacuum Instrumentation Engineer based in Oxfordshire, with a specialist scientific company who are at the forefront of groundbreaking scientific experiments. This contract will not accept candidates operating via a PSC, therefore you will be required to work via an Umbrella company. This is a great opportunity to work with technology that you will not find anywhere else in the UK. The company is currently undertaking the biggest project in their history, worth around £500 million and they need you to come on board and help them make it a success. You will be responsible for inspection, testing, commissioning of the state of the art vacuum systems which are part of a bigger machine. Key skills required for the Contract Vacuum Instrumentation Engineer based in Oxfordshire: • Practical experience and ability with vacuum or general physics instrumentation and electronics, interfacing, debugging and fault-finding., • Experience with Physics of ultra-high vacuum or accelerator vacuum systems., • Experience with Industrial or accelerator control systems, • Practical experience and ability with commissioning, operation and troubleshooting of control instrumentation. For more information or to apply for the Contract Vacuum Instrumentation Engineer opportunity based in Oxfordshire, please contact Jack Kelly - (url removed) / (phone number removed) quoting reference JWK1069

Engineer - Autonomous Systems / Defence Technology £45,000 - £50,000 per year Full Time | Permanent Location: Oxford We are supporting an early-stage deep tech company working in autonomous systems and safety-critical AI. The business is building assurance technology for autonomous systems. Their platform monitors and constrains behaviour in real time, helping ensure systems stay within defined operational and safety limits even in unpredictable environments. They are already working with customers in defence and autonomy, including UAVs, multi-agent systems, and mission-critical AI applications. The role This is a hands-on engineering position within a small team. You will work across software and systems engineering to support the development of real-time assurance and monitoring technology used in autonomous platforms. The environment is fast-moving and highly technical, with exposure to cutting-edge autonomy and AI systems. Key responsibilities Develop and support real-time monitoring and assurance systems Work on integration with autonomous platforms and simulation environments Test and validate system behaviour in edge cases Contribute across software and systems development Work closely with technical teams and stakeholders What we are looking for Engineering background (software, systems, electronics, robotics or similar) Experience working on complex technical systems Strong problem-solving ability and attention to detail Comfortable working in fast-paced environments with changing priorities Interest in autonomous systems, AI, or safety-critical engineering Important requirements Must be eligible to obtain UK Security Clearance (SC) Must have the right to work in the UK What's on offer £45,000 - £50,000 salary Early-stage role with real ownership Exposure to defence and autonomy programmes Broad technical scope across software and systems Direct impact on emerging autonomous safety infrastructure

The RLE INTERNATIONAL Group is one of the world's leading providers in the fields of vehicle development, technology and consulting. On the basis of more than 40 years of development & consulting, we provide innovative and effective solutions for our UK customers in the area of Automotive Engineering. RLE INTERNATIONAL is represented at locations close to its customers in Europe, Asia and USA. Job Title: Senior Systems Engineer – Energy Storage Systems Rate: Negotiable (in line with experience) Location: Oxford/Banbury – 3 months (potential to extend) Job Description: We are seeking a Systems Engineer to support the development and integration of an energy storage program utilizing electric motors, power inverters, and battery systems. The Systems Engineer will be responsible for defining system requirements, ensuring subsystem integration, managing technical risks, and supporting the full system lifecycle from concept through deployment and operation. Key Responsibilities: Define and manage system-level requirements for energy storage systems. Develop system architectures integrating batteries, inverters, motors, controls, and thermal management. Lead system integration activities across electrical, mechanical, software, and controls domains. Perform system trade studies, performance analysis, and failure mode analysis (FMEA/FMECA). Ensure compatibility and interface definition between batteries, power electronics, and motors Support system validation, verification, and testing (V&V). Monitor system efficiency, safety, reliability, and performance metrics. Collaborate with suppliers and internal engineering teams on component selection and qualification. Support compliance with applicable standards and regulations (UL, IEC, IEEE, ISO, NFPA, etc.) Develop and maintain system documentation, block diagrams, and interface control documents (ICDs). Support commissioning, field troubleshooting, and continuous improvement efforts Day to day program management supported by Head of Program and ED. Experience Required: • Experience with energy storage systems, power electronics, or electric drive systems, • Strong understanding of batteries (Li-ion preferred), inverters, and electric motors, • Knowledge of system-level modelling and requirements management, • Experience with electrical architectures, power distribution, and controls integration, • Familiarity with safety concepts including functional safety and battery safety, • Experience with vehicle level or industrial energy storage systems, • Knowledge of battery management systems (BMS) and motor control strategies, • Experience with system simulation tools (MATLAB/Simulink, PLECS, PSCAD), • Familiarity with standards such as UL 9540, UL 1741, IEC 62933, IEEE 1547, • Experience with thermal management and cooling systems, • Systems engineering tools (DOORS, Jama, SysML) Skills Required/Preferred: • Strong systems thinking and ability to manage complex, multidisciplinary designs, • Excellent problem-solving and root cause analysis skills, • Clear technical communication with cross-functional teams, • Ability to balance performance, cost, safety, and schedule trade-offs, • Collaboration with hardware, firmware, software, and operations teams Required Qualifications: Bachelor’s degree in electrical engineering, Systems Engineering, Mechanical Engineering, or related field. Additional: • UK Driving licence, • May require travel to customer locations, • 2-3 days on site – remainder, office and/or home based Eligibility: Sponsorship is not offered for this role and therefore you must have the right to work in the UK

Electrical / Electronic Engineer Culham Science Centre, Abingdon, Oxfordshire, United Kingdom Full-time Salary: £57,117 (inclusive of Specialist Allowance) + excellent benefits, including outstanding pension Division: Plasma Science and Fusion Operations Site Location: UKAEA Culham, Oxfordshire Confirmed Grade: Grade G Department: Tokamak Systems Company Description By 2050, the planet could be using twice as much electricity compared to today. Are you interested in contributing and helping to shape the future of the worlds energy? If so, read on. Fusion, the process that powers the Sun and Stars, is one of the most promising options for generating the cleaner, carbon-free energy that our world badly needs. UKAEA leads the way in realising fusion energy, partnering with industry and research for ground-breaking advancements. Our goal is to bring fusion electricity to the grid, supported by tomorrow's power stations. In pursuit of our mission, UKAEA embraces core values: Innovative, Committed, Trusted, and Collaborative. As an employee of UKAEA, you will benefit from: • Outstanding defined benefit pension scheme, details of which can be found at the end of this advert - Corporate bonus scheme up to 7% and a Relocation allowance (if eligible) - Flexible working options , including family-friendly policies and the right to request flexible working from the start of your employment - Employee Assistance Programme and trained Mental Health First Aiders - Generous annual leave allowance, starting with 25 days, plus 3 days Christmas closure and 2.5 privilege days, in addition to UK bank holidays - Wide range of career development opportunities - A vibrant culture committed to equality and being fully inclusive What to expect in our recruitment process: For a step-by-step overview of how we hire from application to offer, please see our Recruitment Process page on our website. Job Description The salary for this role is £57,117 (inclusive of a Specialist Allowance). Onsite working is expected for 5 days each week, however, we actively support requests for flexible working. This role can be based at any of the following sites: Culham, Oxfordshire. This role requires employees to complete an online Baseline Personnel Security Standard (BPSS) , including The Disclosure & Barring Service (DBS) checks for criminal convictions and possibly a search of open source data. The Role As an Electrical / Electronic Engineer , you will act as the technical expert for major elements of the MAST-U Tokamak pulsed power supplies plant, supporting the safe operation, maintenance and continuous improvement of critical fusion energy systems. You will lead plant-related activities, including maintenance, fault finding, repairs, refurbishments and upgrade projects, ensuring systems operate safely, efficiently and in line with operational requirements. Acting as a Plant Responsible Officer (PRO), you will advise operational teams and managers on plant performance, limitations and improvements, while maintaining accurate technical documentation and supporting the development and training of staff. Alongside supporting large-scale engineering projects, you will also undertake rostered operational duties, taking responsibility for the safe performance of complex plant systems, using diagnostic, analytical and problem-solving techniques to identify issues and support timely resolutions. Additionally, you will: • Train and support staff working with pulsed power electrical systems - Apply technical expertise in high-current and high-voltage power systems - Review technical documentation and supplier specifications - Ensure compliance with relevant safety and regulatory requirements Qualifications Essential Requirements: To be considered as an Electrical / Electronic Engineer, you will need: • A high level of experience in the design, installation and commissioning of electrical/electronic systems and high voltage, high power conversion systems in an industrial environment - Experience with electrical/electronic safety systems and procedures - Experience preparing safety documentation - Experience in component, sub-system and system-level fault-finding - Proven experience in the installation and commissioning of C&I systems - Proven experience in project planning, including resource and cost profiling - Proven experience in an operational control room - Proven leadership experience in managing technical teams and projects - Specialist knowledge of a wide variety of Magnetic Coil, Neutral Beam and RF Heating Power Supply systems - Knowledge of 18th Edition Wiring Regulations BS7671 - Knowledge of Construction, Design and Management Regulations Works Supervision - A degree in Electrical/Electronic Engineering or equivalent, or to be qualified by experience - IOSH Managing Safety qualification Risk Assessment and Work Control - To have achieved or be working towards professional registration Other organisations may call this role Senior Electrical Engineer, Senior Electronic Engineer, Lead Power Systems Engineer, Lead Electrical Systems Engineer, High Voltage Engineer, Power Electronics Engineer, or Electrical Plant Engineer. Additional Information For a full list of benefits and to apply, select the apply button to be taken through to the UKAEA careers pages. UKAEAs mission is clean energy for all, and we welcome talented people from all backgrounds to help us achieve this goal. We are committed to equality, diversity, and inclusion and strive to ensure fair representation across our workforce. We particularly encourage applications from groups currently underrepresented in STEM, including women and individuals from diverse ethnic backgrounds, while ensuring all appointments are made on merit. UK Atomic Energy Authority is committed to being accessible. Please contact us if you have any questions or require help or adjustments to compete on a fair basis, for example, changes to the way we interview or share information. Please note that vacancies are generally advertised for 4 weeks, but may close earlier if we receive a large number of applications. TPBN1_UKTJ

Product / Mechanical Design Engineer (Opto-Mechanical Systems) Overview A growing technology company developing advanced sensing and instrumentation products is seeking a Product / Mechanical Design Engineer to join its multidisciplinary R&D team. The organisation builds next-generation hardware systems that combine mechanical, optical, and product-focused engineering, with a strong emphasis on hands-on development and rapid iteration. This is an opportunity to join a fast-moving development environment where you’ll contribute directly to real-world products, working across concept, design, prototyping, and validation. The role is primarily based on-site to support collaboration and hands-on system development, with some flexibility for hybrid working where appropriate. The Role You will play a key part in the development of complex hardware products, with a particular focus on opto-mechanical systems and productised hardware. The role blends mechanical design, practical prototyping, and cross-disciplinary collaboration, working closely with engineers from adjacent domains. You’ll be expected to take a systematic, hands-on approach to problem solving and to operate effectively in a dynamic, evolving product development environment. Key Responsibilities Design and develop mechanical and opto-mechanical hardware for product-focused systems Produce detailed 3D CAD models, assemblies, and technical drawings Support materials selection and manufacturing process decisions Build and iterate prototypes using in-house and external fabrication methods (e.g. 3D printing, machining, laser cutting, cable assembly) Contribute to system integration, testing, and validation activities Create and maintain technical documentation including specifications, drawings, BOMs, and build instructions Work closely with cross-functional teams to deliver robust, manufacturable product designs Support continuous improvement of designs, processes, and documentation Required Qualifications & Experience Degree, HND, or equivalent industrial experience in Mechanical Engineering, Engineering, or a related discipline Around 3+ years’ experience in product development within a multidisciplinary R&D or product development environment Demonstrated experience developing opto-mechanical or precision hardware systems Strong grounding in mechanical design principles, materials, and common manufacturing processes Proficiency in 3D CAD (SolidWorks or similar), including complex assemblies and detailed drawings Hands-on prototyping experience (e.g. SLA/FDM 3D printing, basic machining, laser cutting, cable assembly) Comfortable working in a fast-paced, evolving development environment Desirable Experience Experience producing clear technical documentation (specifications, test procedures, build instructions, revision control, BOMs) Background in a start-up, scale-up, or new product development environment Exposure to product design or user-focused design considerations Working knowledge of electronics, firmware, or adjacent engineering disciplines What’s on Offer Opportunity to work on cutting-edge, real-world hardware products High-impact role in a growing, technology-focused organisation Hands-on involvement across the full product development lifecycle Collaborative, multidisciplinary engineering environment Strong scope for technical growth and ownership

Refeyn Ltd are looking for a Manufacturing Technician to join our Operations team based in Oxford . You will join us on a full-time, permanent basis, and in return, you will receive a competitive salary between £30,000 £36,000 plus excellent company benefits. About us: Our vision is to accelerate discovery through innovation, empowering the latest scientific breakthroughs in basic research and transforming biotherapeutic development and manufacturing. The Manufacturing Technician role: Are you a skilled technician with a passion for precision? We're looking for a Manufacturing Technician to assemble, test, repair and refurbish cutting-edge instrumentation we are producing. Our product integrate lasers, electro-optic systems, 3D positioners and detection using high specification video cameras. Instrument assembly therefore largely involves electronics box-build and optical alignment, and with sub-assembly components and full system build. Collection and strict management of data is also a key element of the role, as is involvement in Continuous Improvement tasks and projects. Key responsibilities as our Manufacturing Technician: Assembly and test of Mass Photometer instruments: Producing electrical harnesses Assembling electronic sub-systems Assembling and aligning optical components. Final Acceptance Testing (FAT) Test routines are bespoke to Refeyn, but clearly documented – training will be given. Producing equipment to detailed Work Instructions, assembly instructions and documented test routines. Involvement at all stages of the wider operations and manufacturing processes, for example: To understand, design and implement lean manufacturing techniques to ensure the manufacture of both electronic and optical systems is well organised, straightforward to perform and provides an economical process. Work with bills of material, part procurement and stock holding to ensure forward planning and smooth running of the operations activities. What we're looking for in our Manufacturing Technician: University degree in relevant discipline or relevant industry experience Relevant industrial operations experience (approx. 3 years) Working in a laboratory environment requiring personal protective equipment (PPE) and handling of lasers and optics. Ability to assemble electronic subsystems, including fault finding (eg continuity testing). Experience of assembly of high precision and/or delicate parts, optics handling and use of lasers. Some experience of testing high-technology equipment prior to shipping. Benefits of becoming our Manufacturing Technician: We anticipate a salary between £30,000 and £36,000 for this role, depending on the candidate's experience. 25 days annual leave per year in addition to bank holidays Up to 7% employer matched pension contribution Private health insurance from day one plus critical illness cover, income protection and life insurance Give as You Earn and Cycle to Work salary sacrifice schemes. Annual Company and Individual bonus scheme Must have a right to work in the UK If you believe you meet the above criteria and would like to join our fantastic team, we would be delighted to hear from you. Click ‘apply' today to become one of our Manufacturing Technician! TPBN1_UKTJ

Senior Assembly Technician | Oxford | £35,000 - £45,000 My client is a leading organisation in the space sector, known for delivering cutting-edge mission technology and supporting high-profile international space programmes. They are seeking a Senior Assembly Technician to join their team. The Role As a Senior Assembly Technician, you will play a key role within the Assembly, Integration and Test (AIT) function, supporting the build and integration of high-precision space hardware. Key Responsibilities +Assemble and integrate mechanical and electrical components, sub-assemblies, and systems in accordance with technical drawings and work instructions +Perform electrical wiring, cable harnessing and connector terminations to recognised industry standards (e.g. IPC-A-610, IPC-A-620) +Carry out soldering and rework activities in line with IPC-J-STD-001 +Create and maintain risk assessments +Accurately record test data and complete all required project and quality documentation Key Skills and Experience: +ONC / HNC / NVQ Level 3 (or equivalent) in Electrical, Mechanical or Electronic Engineering, or equivalent practical experience +5–10 years’ experience in a hands-on assembly, integration or test role, ideally within aerospace, defence or electronics +Strong practical skills in mechanical fitting, wiring and assembly +Ability to read and interpret technical drawings, schematics and wiring diagrams +Experience using hand tools, torque tools and test equipment (e.g. multimeters, oscilloscopes) This is an exciting opportunity to join a growing international organisation at the forefront of space innovation. If you are passionate about precision engineering and want to contribute to ambitious space missions, we would love to hear from you

An exciting opportunity has arisen for a Senior Communications Engineer to join a highly innovative space engineering environment, working on advanced satellite missions. This role sits within a multidisciplinary avionics team and will see you take ownership of the communications subsystem, contributing across the full lifecycle from design and analysis through to verification and validation. You will play a key role in delivering robust space-to-ground communications solutions, working closely with systems, integration, and procurement teams. Key Responsibilities Lead the design and architecture of spacecraft communications subsystems Develop and manage link budgets, including space-to-ground and data downlink analysis Support and review system-level communication performance and requirements Manage the selection, procurement, and supplier oversight of communication hardware (e.g. Tx/Rx units, antennas, GNSS components) Perform multipath and interference analysis, ensuring system robustness Support ITU regulatory compliance and frequency licensing considerations Contribute to ground station selection and interface activities Define and execute unit-level testing, including hardware acceptance and performance validation Develop test procedures and support verification & validation (V&V) activities alongside integration teams Manage work packages, including planning, scheduling, cost estimation, and resource allocation Provide technical leadership and mentorship to junior engineers Essential Skills & Experience Degree (BSc/MSc) in Electronics, Communications Engineering, or a related discipline Strong experience in satellite communications systems design and architecture Proven expertise in link budget creation and analysis Experience modelling and simulating space-to-ground communication links Knowledge of frequency licensing and ITU regulations Hands-on experience with communications hardware and testing Experience developing and executing verification & validation plans for satellite systems Strong stakeholder collaboration skills and ability to work across multidisciplinary teams Eligibility to work in the UK and Europe Desirable Experience Broader understanding of satellite systems engineering Experience with antenna design and RF propagation Advanced knowledge of link budget optimisation and performance modelling Familiarity with regulatory and licensing processes for space communications What’s on Offer Competitive salary Hybrid and flexible working arrangements Optional compressed working pattern 25 days holiday (increasing with service) + bank holidays Private healthcare and life insurance Relocation support and visa sponsorship (where applicable) Access to modern engineering and laboratory facilities Collaborative, international team environment Ongoing learning and development opportunities Regular team and social events This is a fantastic opportunity for an experienced communications engineer to take a lead role in cutting-edge satellite programmes, contributing to complex missions in a collaborative and forward-thinking environment. TT

Our client has a permanent opportunity for a Scientific Product Specialist – Sales Support. They provide automation and fluid control solutions. As a key member of their talented and successful products team this is an interesting, varied, and challenging customer-facing role that is designed to support increase their market share. Working closely with the field sales team you will provide application, product knowledge and sale support during customer visits. The range of product focus include chillers, heat exchangers, sensors, media separated valves, clean wet pumps, and process gas controls. The key aspects we are looking for from applicants are: The person: • Strong relationship building skills, • Ability to provide value propositions, • An inquisitive nature Experience selling into: • Medical, • Life Science, • Hi-end processes manufacturing, • Pharmaceutical, • Semiconductors Product knowledge: • Thermo Controls, • 2 Port Valves, • Process Gasses To be considered you will need to demonstrate customer facing technical and sales experience. Key Responsibilities: Maintain accurate records of activities using our CRM system Grow sales of the product range through supporting the salesforce and their customers Understand and have the ability to use the value proposition of the product range responsible for and business value to grow sales. Identifying, researching, and gaining application knowledge for new opportunities for the product range. Promote the product range responsible for by creating marketing material, training material, and identifying trade shows where the range will achieve exposure. Develop strong working relationships with internal and external customers consulting with them to solve problems from a technical perspective. Meet and exceed targets. Skills and Experience: Desirable: A degree within a Science or Engineering discipline Required: HND or equivalent or relevant experience Proven track record of selling, specifying, or developing the product range of chillers, heat exchangers, sensors, media separated valves, clean wet pumps and process gas controls. Experience, skills and knowledge of the types of applications found in the non-invasive life science / medical / electronics industry, as these are the types of market areas, you will be working in. Demonstrate an ability to communicate and influence effectively at all levels of the business. Highly driven and passionate about making a difference within the industry. Proven track record of using value propositions to ensure customer satisfaction, increasing retention and customer loyalty to a brand. Full UK Driving Licence Current passport as European travel may be required. Due to the large number of responses we receive it is not always possible to respond to every application straight away. Should your skills and experience be a match for this role, or any other vacancy we may have, we will normally contact you within 72 hours of receiving your application. If you wish to apply for further roles please do so

Senior C&I Engineer Abingdon Rd, Culham, UK Full-time Salary: £57,117 (inclusive of Specialist Allowance) + excellent benefits, including outstanding pension Division: Plasma Science and Fusion Operations Site Location: UKAEA Culham, Oxfordshire Confirmed Grade: Grade G Department: Tokamak Systems Company Description By 2050, the planet could be using twice as much electricity compared to today. Are you interested in contributing and helping to shape the future of the worlds energy? If so, read on. Fusion, the process that powers the Sun and Stars, is one of the most promising options for generating the cleaner, carbon-free energy that our world badly needs. UKAEA leads the way in realising fusion energy, partnering with industry and research for ground-breaking advancements. Our goal is to bring fusion electricity to the grid, supported by tomorrow's power stations. In pursuit of our mission, UKAEA embraces core values: Innovative, Committed, Trusted, and Collaborative. As an employee of UKAEA, you will benefit from: • Outstanding defined benefit pension scheme, details of which can be found at the end of this advert. - Corporate bonus scheme up to 7% and a Relocation allowance (if eligible). - Flexible working options , including family-friendly policies and the right to request flexible working from the start of your employment. - Employee Assistance Programme and trained Mental Health First Aiders. - Generous annual leave allowance, starting with 25 days, plus 3 days Christmas closure and 2.5 privilege days, in addition to UK bank holidays. - Wide range of career development opportunities. - A vibrant culture committed to equality and being fully inclusive. What to expect in our recruitment process: For a step-by-step overview of how we hire from application to offer, please see our Recruitment Process page on our website. Job Description The salary for this role is £57,117 (inclusive of a Specialist Allowance). Onsite working is expected for 5 days each week, however, we actively support requests for flexible working. This role can be based at any of the following sites: Culham, Oxfordshire. This role requires employees to complete an online Baseline Personnel Security Standard (BPSS) , including The Disclosure & Barring Service (DBS) checks for criminal convictions and possibly a search of open source data. The Role Are you looking for an exciting opportunity to make a difference? Join our team and contribute to the future of fusion energy. As Senior C&I Engineer , you will play a pivotal role in the Machine Control and Protection Team, providing electrical, electronics & control and instrumentation engineering support to machine operations and diagnostics systems. These systems include MAST Upgrade (MAST-U) machine control, real-time & hardwired protection and Personal Access Safety System (PASS). In addition, the team supports any engineering requirement for Diagnostic and Enhancement projects within MAST-U. ? The post holder will troubleshoot, design and deliver high-level electrical systems to optimise and maintain MAST-U operations. The post holder will be responsible for the maintenance and upgrade of critical operational systems and lead activities within MAST-U Integrated Commissioning & Restart. Additionally, you will: • Plan/implement Schneider PLC & iFIX SCADA software/hardware changes, manage configuration control, and ensure all changes are agreed and captured. - Deliver safely and cost-effectively; act as RO/SME for protection subsystems (maintenance schedules, fault support); close out ATO/safe-working actions and coordinate with Beam Control, Diagnostics, Plasma & Z-control, and Power Supplies for safe/efficient ops. - Help define/control-system strategy and spares/stock; review/analyse performance with weekly reporting; act as Project Engineer/Manager for procedures, plant docs, and RAMS; manage suppliers and costs within budget. - Lead multi-disciplinary teams (staff, contractors, apprentices) and work toward appointment as MEiC (MAST-U Engineer in Charge) during operations/engineering periods. Qualifications Essential Requirements: • Degree in Electrical/C&I Engineering or equivalent, or qualified by experience. - Must demonstrate extensive proven experience in programming & fault finding of PLCs, Schneider would be desirable. - Must demonstrate extensive proven experience in design, installation and testing of C&I systems hardware. - Must demonstrate extensive proven experience in electrical control schematics design and the ability to fault find. Desirable Requirements: • Experience with Visual Basic or similar programming languages. - Computer networking literacy. - Understanding of Programmable control systems standard IEC 61131. - Understanding of Functional Safety standards IEC 61508 and IEC 62061. - Experience with cable management software. - Experience with cable and circuit protection sizing. Additional Information For a full list of benefits and to apply, select the apply button to be taken through to the UKAEA careers pages. UKAEA's mission is clean energy for all, and we welcome talented people from all backgrounds who want to help us achieve our mission. We are under-represented from some groups and so want to encourage applications in particular from women in STEM, people from Black British Caribbean and African backgrounds and from Pakistani and Bangladeshi British backgrounds. Our Executive team, supported by our 'Head of Equality, Diversity and Inclusion' (EDI) and Wellbeing, and our EDI Networks actively promote Inclusion and take steps to increase diversity within our organisation. We reinforce best practices in recruitment and selection and evaluate approaches to remove barriers to success. UK Atomic Energy Authority is committed to being accessible. Please contact us if you have any questions or require help or adjustments to compete on a fair basis, for example, changes to the way we interview or share information. Please note that vacancies are generally advertised for 4 weeks, but may close earlier if we receive a large number of applications. TPBN1_UKTJ

Business Development Manager (Electronics)c£50k + Commission + Benefits. Technical understanding of electronics design and manufacturing processes.

Become part of a growing engineering team as a Senior Electronics Engineer, focusing mainly on the design and development of new products, as well as working closely with customers and the software team. The Senior Electronics Engineer should ideally have the following key skills:. Desirable skills

We’re partnering with a leading broadcast technology company to secure a Contract Electronics Design Engineer supporting both new product development (NPI) and existing product platforms. Strong experience in electronics design, including analogue and digital circuit design.

Deep Sea Electronics is a global leader in the design and manufacture of generator controllers, automatic transfer switch controllers, battery chargers, and vehicle and off-highway control systems—powering critical infrastructure worldwide. Knowledge of working within a company that has a technica

Business Development Manager – CEM (Contract Electronics Manufacturing). We are recruiting for a Business Development Manager to join a well-established and growing Contract Electronics Manufacturer (CEM) provider. Strong understanding of electronics manufacturing processes and supply chains.

Senior level experience in technical sales of power electronics or energy systems.

Hiring a 🔋 Senior Analogue Power Electronics Design Engineer. It's one where you own the full design lifecycle from first concept to production on genuinely complex power electronics, while shaping the technical culture around you. You'll lead power electronics design projects end-to-end: system-

Build and maintain strong relationships with customers, delivering consultative power electronics solutions tailored to their requirements. Background or experience within power electronics (AC/DC, DC/DC power supplies, industrial PSUs, LED drivers, or battery systems). An exciting opportunity has a

On April 2nd, 2024, Future Electronics joined WT Microelectronics. Driving business development activities for Automotive & Transportation OR Aerospace & Defense customers, aligned with Future Electronics’ strategic market focus. Several years of experience in Business Development or Sales within

Redline has an extraordinary opportunity for a Contract Power Electronics Engineer based in Oxfordshire, with a specialist scientific company who are at the forefront of groundbreaking scientific experiments. Working collaboratively with other Electronics Engineers, including FPGA, Controls and Powe

Principal Electronics Engineer. An exciting new opportunity has opened for a Principal Electronics Engineer to join a well-established semiconductor technology company in West London. As Principal Electronics Engineer, you will play a key role in the design and development of high-performance electr

We have an exciting, long-term opportunity for an experienced Contract C & I Engineer to join our customer based in Yorkshire.This role offers an OUTSIDE IR35 determination, meaning we can accept candidates who would like to operate through their own PSC.Our customer is a well-respected provider of

Advanced Electrical Engineer (Electronics). Support the full end-to-end electronics design lifecycle, from concept through production and in-service support. Define and document electronics requirements, design plans, and technical specifications.

An opportunity has arisen for a Defence Sales Manager to join a growing advanced engineering and aerospace technology organisation developing highly specialised platforms and systems for defence, security and commercial applications.The business operates at the forefront of innovative aerospace and

SENIOR ELECTRONICS DESIGN ENGINEER. Provide technical expertise across all areas of electronics engineering. Knowledge of electronics manufacturing processes and techniques.

Key skills required for the Senior Electronics Test Engineer:. Significant hands on experience within an Electronics test environment. An exciting opportunity has arisen for a Cheshire based Senior Electronics Test Engineer to join this leading provider of electronic design and assembly services.

National Account Manager – Consumer Electronics. We’re supporting a fast‑growing consumer electronics company as they expand their retail channel, and we’re looking for a National Account Manager to join their high‑performing team. About the Company Our client is a dynamic, rapidly scaling