Installation jobs in DidcotCreate job alerts

Due to our continued growth, we are looking to recruit a Renewable Heating Engineer to join our team, covering projects throughout the Oxfordshire area.This role would suit either an experienced renewables engineer who already has experience with Air Source Heat Pumps (ASHPs), plant rooms, MVHR systems, underfloor heating and servicing, or an experienced plumbing and heating engineer who is looking to move into the renewable sector.For the right candidate, we can provide full onsite training covering the installation and servicing of ASHPs, plant rooms, MVHR systems and underfloor heating. This is a great opportunity for someone who wants to broaden their skills and build a long-term career in the renewables industry.We offer a company vehicle, bonus scheme, ongoing training and the opportunity to work on a wide variety of renewable heating projects with a supportive and experienced team.We're looking for someone who takes pride in their work, has a good attitude, is willing to learn and enjoys working both independently and as part of a team. A full UK driving licence is essential.If you think this could be the right opportunity for you, or you know someone who may be interested, please get in touch or send us your CV. We'd be happy to have an informal chat about the role.TPBN1_UKTJ

M4 Specialist are working with a well established engineering company who are looking for experienced Air Conditioning installation and maintenance engineers. \n Duties \n\n • Carrying out all aspects of Air Conditioning, commercial heating, refrigeration and mechanical services.\n, • Installation & Maitenance\n, • Inspection of equipment\n\n \n Please note a 'F' Gas qualification is compulsory. \n 20 days holiday + bank holidays + ... \n \n \n \n \n ZIPC1_UKTJ

ElectricianContract Length: Until 30/09/2027Location: Culham, Abingdon on siteSecurity Clearance: BPSS eligibleMinimum Requirement:To provide ongoing electrical installation delivery across the Culham site. The job holder (JH) will lead on a wide range of electrical work in an industrial environment covering installation, commissioning, fault-finding, maintenance and repair in accordance with current legislation and codes of practice.Essential:ECS Gold cardMust demonstrate the ability to work safely in accordance with a written safe system of work (WSSOW).Previous work experience in an industrial/commercial environment.Supervisory experience is desirable.Work and communicate as part of a team.Ability to solve problems.Ability to prioritise and balance the workload.Should ideally demonstrate knowledge of large distribution networks.Supervisory experience is desirable.Take responsibility for installation phase of projects ensuring Safe Systems of Work are followed, working to a plan, being flexible and keeping to timescales, including leading installation teams.Install indoor and outdoor electrical distribution equipment in compliance with current regulations and local standards.Undertake the construction, wiring and commissioning of electrical control cubicles.Perform testing, commissioning and fault-finding tasks on various electrical control and distribution equipment.Setting work, supervising and providing guidance and supervision to less experienced electricians and electrical apprentices.Work on various projects with diverse teams across site with the ability to prioritise daily tasks and allocate work to team members according to the appropriate work plan for each project.Maintain high standards of safety at all times and comply with safety procedures.TPBN1_UKTJ

Field Service Engineer - Woodworking Machinery \n Advanced Machinery Services Ltd \n Location: Field-based across Southern England - ideally Oxford or Reading region. \n HeadOffice: Skeffington, LE7 9YESalary: £33,000-£35,000 DOE, plus overtime, commission and benefits. (OTE £40,000-£48,000)Hours: Full time, 40 hours per week \n Are you an experienced Field Service Engineer with strong electrical and mechanical skills? Join a respected, growing business and work with leading woodworking machinery brands across a varied customer base. \n You’ll enjoy plenty of autonomy while receiving excellent technical support from a knowledgeable team committed to delivering first-class customer service. \n Advanced Machinery Services Ltd (AMS) is looking for a Field Service Engineer to service, repair, maintain and install specialist woodworking machinery at customer sites across Southern England and occasionally further afield. \n What’s in it for you? \n\n • £33,000-£35,000 salary, depending on experience\n, • Overtime paid at time and a half\n, • Commission on Machine Sales\n, • Company vehicle and mobile phone\n, • Travel, accommodation and work-related expenses covered\n, • 28 days’ holiday including Bank Holidays, increasing to 29 days after five years\n, • Excellent training, development and internal support\n, • Opportunities to progress into the Sales or Installation teams\n, • Work with leading brands, including Leadermac\n\n About AMS \n AMS specialises in the supply, installation and maintenance of woodworking machinery from brands including SCM, Homag, Robland, Weinig and Striebig. \n Our customers range from small workshops to major UK manufacturing facilities, so no two days are the same. We also sell, service and support Wadkin, Wadkin Bursgreen, Doucet, Bala and Stenner machinery and are the main UK and Ireland dealer for Leadermac. \n With a superb industry reputation, AMS is a secure, forward-thinking business offering a friendly and professional working environment. \n The role \n Working as part of our experienced Field Service Team, you will: \n\n • Diagnose electrical and mechanical breakdowns and faults\n, • Service, repair and install specialist machinery\n, • Fit replacement parts and test equipment\n, • Complete planned preventative maintenance\n, • Respond to emergency call-outs and unplanned repairs\n, • Liaise with the Service Department at head office\n, • Complete all required paperwork promptly\n, • Maintain excellent workmanship and safety standards\n, • Support our head-office workshop engineers when required\n\n The position involves regular travel and occasional overnight stays. All associated costs are covered by AMS. \n About you \n You will need: \n\n • Proven Field Service, Mechanical or Electrical/Mechanical Engineering experience\n, • Strong electrical and mechanical skills\n, • Competent electronic fault-finding ability\n, • Excellent communication and problem-solving skills\n, • A full UK driving licence\n, • Flexibility to travel and occasionally stay away\n\n Experience with industrial or woodworking machinery would be advantageous. Ideally, you will live in the Oxford or Reading region. \n Apply today \n If you have the required Field Service Engineering experience and want to develop your career with a growing machinery specialist, click Apply today. \n Applicants must be eligible to work in the UK and hold a valid UK driving licence. \n Other suitable skills and experience include. Woodworking Machinery Service Engineer, Field Service Engineer – Industrial Machinery, Field Service Engineer – Woodworking Equipment, Electromechanical Field Service Engineer, Electrical and Mechanical Field Service Engineer.

M4 Specialist are working with a well established engineering company who are looking for experienced Air Conditioning installation and maintenance engineers. \n Duties \n\n • Carrying out all aspects of Air Conditioning, commercial heating, refrigeration and mechanical services.\n, • Installation & Maitenance\n, • Inspection of equipment\n\n \n Please note a 'F' Gas qualification is compulsory. \n \n 20 days holiday + bank holidays + day of for Birthday \n Increases after 5 years service \n \n Call out 1 week in 6 \n \n Company vehicle supplied \n Salary is Negotiable \n \n This is an immediate permanent role. \n \n M4 Specialist are an employment business and operates as an equal opportunities employer. Permission to place an advertisement for the above mentioned role has been given by the company mentioned.

Harwell, Oxfordshire – based onsite \n 3-year fixed-term appointment \n About Us \n Diamond Light Source is the UK’s national synchrotron; a huge scientific facility designed to produce very intense beams of X-rays, infrared and ultraviolet light. Our scientists use the light to study a vast range of subject matter, from new medicines and treatments for disease to innovative engineering and cutting-edge technology. \n At Diamond we are currently undertaking a major upgrade of the facility, known as Diamond-II. Diamond-II will combine a new machine and new beamlines with a comprehensive series of upgrades to optics, detectors, sample environments, sample delivery capabilities and computing, which will ultimately generate an even more brilliant light source at a higher energy. \n About the Role \n We now have an opportunity for a Senior Power Supplies Technician to join the Power Supplies Group on a 3-year fixed-term appointment, supporting both the reliable operation of Diamond’s existing accelerator power converter systems and the delivery of new power supply systems for the Diamond-II upgrade. \n This role will contribute directly to the development, testing, installation and commissioning of high-performance magnet power supplies and associated equipment, with a strong focus on quality, reliability, stability and safe delivery. \n Key responsibilities will include: \n\n • Diagnosing and repairing faults on circuit boards and electronic assemblies at component level.\n, • Building, modifying and maintaining test equipment, test fixtures and associated hardware.\n, • Testing circuit boards, modules, sub-racks and complete power supply racks received from manufacturers or assembled in-house.\n, • Supporting integration testing of power supply systems, including backplanes, controller interfaces, interlocks, cabling and rack-level assemblies.\n, • Preparing materials, components and equipment for installation and commissioning activities.\n, • Supporting and supervising electrical wiring activities for new installations, ensuring work is completed safely and to the required standard.\n, • Commissioning installed equipment and supporting handover into operation.\n, • Procuring parts and services, including liaison with suppliers and manufacturers where required.\n, • Supporting the operation of Diamond’s power converters, including troubleshooting, repair, participation in the 24-hour on-call rota, and occasional shift or out-of-hours working where required to support operations, shutdowns, installations or commissioning activities.\n, • Investigating beam trips and operational issues attributable to power converters, and supporting continuous improvement to minimise recurrence.\n, • Preparing power converters for operation after shutdowns, maintenance periods and upgrade activities.\n, • Organising repair, calibration and maintenance of test equipment and operational assets.\n, • Contributing to documentation, test records, procedures and quality assurance activities associated with Diamond-II delivery.\n\n About You \n You will hold an appropriate HNC, HND or degree in a relevant engineering discipline, or demonstrate equivalent relevant experience gained in an electrical, electronic or power electronics environment. \n You will have practical experience working with power supplies, power converters, electronic assemblies or similar electrical/electronic systems, together with a good working knowledge of engineering drawings, wiring diagrams and schematics. \n You will also have experience of laboratory-based testing, fault finding and measurement techniques, and be confident using test equipment such as oscilloscopes, multimeters, power analysers, signal generators or similar instrumentation. \n Experience in any of the following areas would be advantageous: \n\n • Commissioning of power electronic systems or complex electrical equipment.\n, • Switched-mode power supplies, magnet power supplies, motor drives or inverter systems.\n, • Component-level repair of electronic circuit boards and assemblies.\n, • Rack build, wiring, integration testing or electrical installation work.\n, • Working within a quality assurance, safety or configuration-controlled environment.\n\n You will be a practical, detail-focused and safety-conscious technician with good communication and interpersonal skills. You should be able to work effectively with engineers, technicians, operators, suppliers and other stakeholders, and be willing to contribute ideas and practical solutions to technical and operational challenges. \n The role will require participation in the group’s on-call arrangements and may involve occasional shift working or work outside normal office hours, for example during shutdowns, machine recovery, installation and commissioning periods. \n Visa and Right to Work \n This position doesn't meet the requirements for visa sponsorship, except potentially for those people that are already sponsored in the UK before April 2024 or meet the criteria of a ‘new entrant’. For more information please visit - \n Benefits \n Diamond offers an exceptional benefits package to support staff in achieving a positive work/life balance. This includes 26 days annual leave plus Christmas closure, public holidays, 2 annual volunteering days and flexible working hours. We also offer an excellent defined benefit pension scheme. Staff also have access to a range of amenities on site including a nursery, cafes, a restaurant and sports and leisure facilities. A relocation allowance may also be available where applicable. \n To Apply \n Please use the online application process to apply and tell us why you believe you are suitable for this 3-year fixed-term role. \n The closing date for applications is 16th August 2026

PROJECT MANAGER – HV / SUBSTATION INSTALLATIONLocation : Oxfordshire (Site-based 2–3 days per week)Salary: £65,000 – £85,000 per annumBenefits: Company Car, Pension, 24 Days Holiday + Bank HolidaysContract Duration: PermWe are seeking an experienced Project Manager to lead and oversee major HV, GIS, and substation installation projects in Oxfordshire. This is an excellent opportunity for a skilled professional with proven delivery experience in large-scale power infrastructure projects and strong knowledge of NEC and MF/1 contracts.About the RoleAs Project Manager, you will report directly to the Project Director and take responsibility for the day-to-day management of complex substation projects, ensuring delivery is safe, commercially controlled, and completed on time.You will act as the primary representative on site, coordinating multidisciplinary teams, managing programme delivery, and maintaining excellent stakeholder relationships.Key Responsibilities• Lead day-to-day project delivery of HV/substation installation works• Manage project schedules, budgets, and commercial performance• Oversee NEC and MF/1 contract administration, change control, and risk management• Ensure safe delivery in line with QHSE standards and industry regulations• Coordinate site teams, subcontractors, and external stakeholders• Provide leadership and practical solutions to project challenges• Monitor project milestones and ensure deadlines are achieved• Ensure compliance with all legislative, contractual, and operational requirements• Maintain high standards of quality, environmental performance, and client satisfactionRequirements• Proven experience as a Project Manager within HV, substation, GIS, or power infrastructure projects• Previous experience delivering substation installation projects• Strong working knowledge of NEC and MF/1 contracts• Experience managing large-scale engineering or infrastructure programmes• Strong commercial, financial, and contractual awareness• Excellent leadership, communication, and stakeholder management skills• Relevant industry qualification (HNC, HND, Degree, or equivalent)• Willingness to work site-based in Kent 2–3 days per weekPreferred Experience• National Grid or utility infrastructure project exposure• GIS / HVDC project experience• Major transmission or distribution project delivery• Background in design-and-build environmentsWhy Join• Competitive salary package• Company car and pension• Long-term project security• Opportunity to work on major UK power infrastructure projects• High-profile, technically challenging role• Strong career development potentialHow to ApplyIf you are an experienced Project Manager with a background in substation or HV infrastructure delivery and strong NEC / MF1 contract experience, we would like to hear from you.Apply now to be considered for this exciting opportunity.TPBN1_UKTJ

Production Technician - Oxfordshire - £29,000 Starting Salary + International Travel Opportunities + Specialist Engineering Environment + Huge Progression Opportunity \n \n Do you have experience with the assembly and testing any electro-mechanical equipment? \n \n Have you worked within a production, manufacturing or workshop environment before? \n \n Can you confidently read and interpret engineering drawings and technical documentation at any level? \n \n Are you hands-on, technically curious and keen to develop your engineering skills further as well as progressing your career with a rapidly growing consultany and specialist manufacture within the water industry? \n \n If the answers are yes, we are hiring for a Production Technician on behalf of a specialist engineering organisation that designs and manufactures bespoke equipment used on projects around the world. \n \n WHAT YOU NEED \n Experience assembling mechanical or electro-mechanical systems \n Ability to read and follow engineering drawings and technical instructions \n Background within a production, manufacturing or assembly environment \n Knowledge of manufacturing processes and quality standards \n Strong attention to detail and pride in producing high-quality work \n Good communication skills and ability to work within a team \n Self-motivated approach with a willingness to learn \n Experience with testing, fault finding or troubleshooting equipment \n \n What You Get In Return \n\n • £29,000 starting salary with regular reviews\n, • Opportunity for international travel\n, • Training and development within a specialist engineering environment\n, • Exposure to complex and bespoke technical equipment\n, • Stable and supportive team environment\n, • Long-term career progression opportunities\n\n \n Nice To Haves \n Apprenticeship, HNC, HND or BTEC in Mechanical or Electrical Engineering \n Experience with electric motors, rotating equipment or drive systems \n Knowledge of bearings, seals and mechanical assemblies \n Customer-facing experience \n Installation or commissioning experience \n \n Responsibilities include: \n Assemble and test bespoke electro-mechanical equipment \n Carry out calibration activities and quality checks \n Interpret engineering drawings, specifications and work instructions \n Support fault-finding and troubleshooting activities \n Work closely with engineering and project teams to deliver equipment on schedule \n Maintain accurate production records and component traceability \n Ensure a safe, clean and organised working environment \n Support equipment installations and service activities when required \n Assist with stock control and maintenance of calibrated tools and equipment \n This role would suit an Assembly Technician, Mechanical Technician, Electro-Mechanical Technician or Production Technician looking to work on highly specialised equipment within a business that offers genuine technical development and opportunities to support projects worldwide. \n \n INDWIN \n Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see Many Thanks

Senior Laser Systems Engineer \n \n Are you a Senior Laser Systems Engineer looking for your next challenge? My client has an exciting opportunity for an experienced engineer to join their growing team, working on the design, development and support of advanced laser systems for highly specialised industrial applications. \n \n This is a hands-on role where you will be involved in the development of bespoke laser systems, supporting projects from concept through to manufacture, installation and commissioning whilst working alongside multidisciplinary engineering teams. \n \n In this Senior Laser Systems Engineer role based in Abingdon, Oxfordshire, you will be responsible for the following: \n \n\n • Development of bespoke laser systems, including component selection, system layouts and detailed engineering drawings.\n, • Managing the design process, ensuring projects are delivered to specification, on time and within budget.\n, • Supporting the build, testing, installation and commissioning of laser systems, providing technical expertise throughout the project lifecycle.\n, • Carrying out servicing, fault finding and technical support activities to ensure systems continue to operate at optimum performance.\n\n \n The successful applicant for this Senior Laser Systems Engineer job based in Abingdon, Oxfordshire should have: \n \n\n • Experience designing and developing complex laser & optical based systems within a manufacturing or engineering environment.\n, • A strong understanding of design, system integration and engineering documentation, with experience producing technical drawings.\n, • Experience with installation, servicing, fault finding or commissioning of complex laser engineering equipment would be advantageous.\n, • A Bachelor's, Master's or PhD in Optical Engineering, Photonics, Physics, Laser Engineering or a related engineering or scientific discipline.\n\n \n To apply for this Senior Laser Systems Engineer job based in Abingdon, Oxfordshire please send your CV to NDrain@redlinegroup.Com or call Nick on 01582 878828 for more information.

About The RoleRight across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive.Where will you be working?We help our clients safeguard the water supply, improve environmental performance and manage demand for future generations. We enhance and extend asset life, ensuring compliance with water quality and environmental standards. Were problem solvers with over 140 years of combined experience in engineering and infrastructure.This role will be within our demand management and network infrastructure team. We look after 60 million meters and our teams provide advanced metering solutions to help manage demand for essential suppliers.Want to be a part of it?What will you be doing?As our Project Manager you'll lead the delivery of all operational objectives for meter installation, repair, and maintenance, while achieving ambitious installation volume targets. Ensure full compliance with M Group Water and Thames Water policies. Delivering industry-leading safety, wellbeing, environmental, and customer performance, with a focus on fostering a supportive team environment.You'll need to achieve performance targets in collaboration with Thames Water, and the Operations Manager, ensuring contract margin and gainshare objectives are met. Collaborate with Service Delivery, SHEQW (Safety, Health, Environment, Quality, and Wellbeing), and Commercial teams to optimise team performance, with guidance from the Operations Manager.You'll drive continuous improvement in operational processes, safety protocols, and productivity, while nurturing a culture of learning and professional growth. Reduce internal damages, leaks, and escapes, particularly in pipework, through innovative technical and behavioural improvements, with input from engaged teams.You'll be responsible for minimising fleet and road risks through proactive safety and operational enhancements, involving team feedback and participation. Foster a proactive, people-focused health, safety, and wellbeing culture that sets the industry standard and prioritises employee welfare. Deliver exceptional customer service, achieving high customer satisfaction scores, and minimising complaints through team empowerment and customer-focused strategies.You'll need to establish a performance management culture. Use data to identify underperformance and drive improvements, while supporting team members growth, with guidance from the Operations Manager. Support Thames Water, in meeting OFWAT performance metrics and delivering outstanding value for money.Promote commercial awareness and compliance across all operational teams, encouraging a sense of ownership and pride in their work.Representing or deputising for the Operations Manager in meetings and operational activities as needed. Ensure compliance with M Group Waters environmental processes and specific quality/policy requirements set by Thames Water.Monitor team training, certification, and competence to maintain class-leading compliance levels. Have a focus on developing team skills and career progression, with oversight from the Operations Manager. Lead the metering installation team to adopt behaviours aligned with M Group Waters values, fostering a collaborative and inclusive team culture.What you'll bring Are you a Team builder?Are you naturally open and adept at managing conflicting priorities?Do you have a passion for developing people and fostering an inclusive culture?Do you have exceptional relationship-building skills with clients?Can you command respect and establish credibility at personal and business levels through empathy and leadership?Uncompromising commitment to delivering the highest health, safety, and wellbeing standards.Proven experience leading large, multi-skilled teams in high-volume utility operations, with a focus on people development.Are you commercially astute with a focus on achieving financial and operational targets?IOSH / NEBOSH qualification (Desirable, but not essential)Formal project management qualification (e.g., PRINCE2, APM, or equivalent).Institute of Leadership & Management Level 6 or equivalent.Do you have any knowledge and experience in water meter installation (internal and external)?Working hours: Average 45 hours per week, Monday to Friday, 7:30 AM to 5:00 PM, with overtime at an agreed rateWhats in it for you?We offer a range of benefits designed to support your life in and out of work, some of which include; Contributory pension schemeOnline GP service, 24 hours a day, 365 days a yearEmployee assistance programmeMy Rewards portal, access to 1000s of retail discountsLife assuranceCycle to work, salary finance and give as you earn schemesEnhanced maternity, paternity leave and adoption leaveReward and recognition schemeRecommend a friend get rewarded for introducing people to us!In addition, this role offers; Company car and fuel card with a range of EV and hybrid vehicles to choose fromMy Car Choice our salary sacrifice EV/ Hybrid car schemePrivate health care single coverHealth Care Cash Plan, giving you the ability to claim back medical expenses for things like dental, eyecare and physiotherapy and much more!25 days annual leave plus bank holidaysDiscretionary bonus schemeAbout usWe want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. Were one of the Top 100 UK companies actively supporting and recruiting veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs.Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. Were responsible and go further for our people, clients, communities and the planetWere open and seek new and better ways of exceeding expectationsWere together and as one team; the whole is greater than the sum of the partsWere ambitious and embrace opportunity, to lead essential infrastructure services for lifeWhether youre a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development.Its an exceptional time to be a part of M Group.Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered.For certain roles, successful candidates will be subject to 3rd party background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding.#MGroupW INDSTATPBN1_UKTJ

TICA Qualified Thermal Insulation Engineers (Laggers) Required We are currently looking to recruit experienced TICA Qualified Thermal Insulation Engineers (TIEs/Laggers) for a shutdown project at Didcot Power Station . This is a great opportunity to join a busy site with immediate starts available and competitive NAECI rates.The project is expected to run for 3 to 4 weeks , with plenty of hours available and additional bonuses and allowances on offer.The Role Successful candidates will be involved in a range of thermal insulation activities across industrial plant and pipework systems. Duties will include:Installation, maintenance and removal of thermal insulation on pipework, vessels, ducting and associated plant equipment.Measuring, cutting and fitting a variety of insulation materials to required specifications.Fabrication and installation of aluminium and stainless steel cladding.Working from drawings, specifications and site instructions to complete works safely and efficiently.Carrying out repairs, modifications and replacements to existing insulation systems.Maintaining high standards of quality, housekeeping and health & safety at all times.Working as part of an experienced site team to meet project deadlines.Requirements Valid TICA qualification/card .Previous experience working on industrial, power generation, petrochemical or similar sites.Strong understanding of insulation systems and metal cladding installation.Ability to work safely and effectively in a busy site environment.Immediate availability preferred.NAECI Cat 4 Grade 5 PAYE Rates Monday to Friday (First 38 Hours)£20.91 per hourOvertime 1 (After 38 Hours & First 4 Hours on Saturday)£29.27 per hourOvertime 2 (After 4 Hours on Saturday & All Day Sunday)£37.64 per hourAdditional Benefits £1.00 per hour bonusPaid travel timeTrain fares coveredLodge allowance of £53.39 per day (taxable)Project Details Location: Didcot Power StationDuration: 3-4 WeeksStart Date: ASAPIf you're a TICA Qualified Thermal Insulation Engineer looking for your next contract and available to start at short notice, we'd like to hear from you. Apply today or get in touch for further information.TPBN1_UKTJ

Redline has an extraordinary opportunity for multiple Contract Electrical Technicians based in Oxfordshire, with a specialist scientific company who are at the forefront of groundbreaking scientific experiments.This contract will not accept candidates operating via a PSC, therefore you will be required to work via an Umbrella company.This is a great opportunity to work with technology that you will not find anywhere else in the UK. The company is currently undertaking the biggest project in their history, worth around £500 million and they need you to come on board and help them make it a success.You will be responsible for the upgrade and installation of existing electrical units and placing them into racks to fit into a bigger machine.Key skills required for the Contract Electrical Technicians position based in Oxfordshire:- Experience with Low voltage Electrical Systems- Experience of soldering and crimping- Experience in safe working practices and reading electrical drawingsFor more information or to apply for the Contract Electrical Technicians opportunity based in Oxfordshire, please contact Jack Kelly - / 01582 878812 quoting reference JWK1067.TPBN1_UKTJ

Salary - £33,284 - £35,322PermanentWe reserve the right to close this advert early if we find the right candidate, so we encourage you to apply early.An exciting opportunity has arisen for an experienced Mechanical / Electro-Mechanical Workshop Technician to join our highly collaborative, research-focused engineering team based at our Head Office in Wallingford. As part of the wider Water and Climate Science team, you will play a key role in developing,maintainingand supporting the facilities and equipment that underpin our science.As a technical specialist, you will become part of a small, hands-on workshop team, developing leading-edge sensor systems, environmental monitoring networks, surveyequipmentand bespoke experimental apparatus to support a wide range of researchobjectives. Working across the full engineering lifecycle, you will interpret technical drawings, produce precision-machined components, and build fully tested electro-mechanical assemblies. Using conventional and CNC machining, welding, and fabrication techniques, you will translate complex designs into robust, field-ready solutions.You will work flexibly across disciplines, contributing to electro-mechanical construction, wiring, installation, servicing, and maintenance of equipment. This will include supporting deployments to remote field sites, where reliability, adaptability and problem-solving are essential. Through this work, you will contribute to nationally significant initiatives such as: UKCEH AMI,COSMOS-UK , DELTA,Floods and Droughts Research Infrastructure (FDRI)andAgZero -helping us to deliver the data, insight and innovation needed to protect communities, informpolicyand safeguard the environment.Your main responsibilities will include:Working closely with scientists and researchers to design and build research-grade instruments and bespoke experimental systemsProducing machined parts and fully tested electro-mechanical assemblies from technical drawingsOperating conventionalmanual and CNClathes, milling machines, ,welding equipmentand otherworkshop machineryWorking flexibly across engineering disciplines, including electro-mechanical construction, wiring, installation,servicingand maintenance of equipment, both in the workshop and at remote field sitesSupporting procurement activities andmaintainingaccurateworkshop records and documentationThis role offers exceptional variety and hands-on experience in a fast-paced environment where no two days are the same. From workshop-based fabrication and prototyping to field support and technical problem-solving, your work will directly enable high-quality environmental research. You will join a supportive and passionate team where your practical skills, attention to detail and proactive approach will be valued, and where you can make a meaningful contribution to delivering safe,efficientand effective operations.We are looking for someone who can work both independently and collaboratively, applying sound judgement and knowing when to seek guidance. You will bring a proactive, solutions-focused mindset, using initiative and creativity to resolve technical challenges andidentifyimprovements. Well organised and adaptable, you will manage your time effectively while continuing to build your skills across a diverse range of activities. You will be a clear communicator who can build strong relationships with colleagues and contribute positively to team culture, while also supporting the wider impact and visibility of UKCEHs work.For the role of Engineering Workshop Technician,werelooking for someone who:Holds a relevant technical qualification (BTEC Level 37) or brings equivalent experienceHas a strong understanding of materials, mechanical engineering principles, and engineering tolerances,limitsand fits, with the ability to apply this knowledge in a practical workshop environmentBrings hands-on experience working in a machine shop, ideally supported by a modern or time-served apprenticeshipIs excited by the integration of mechanics and electronics, with an interest in mechatronics and emerging engineering technologiesHas experience building and fault-finding electro-mechanical assemblies, such as sensor wiring and circuit diagnosticsTakes pride in precisionand continuous improvement, with a solutions-focused mindsetWorks collaboratively, sharing knowledge and contributing to a positive, hands-on engineering cultureIs adaptable and comfortable working on a range of projects, using initiative to solve problemsIs well organised,proactiveand able to manage time effectively across varied tasksDemonstrates a solid understanding of workshop health and safety practicesHolds a full UK manual driving licence, and iscomfortableto work outdoors and travel to field sites across the UK, including occasional overnight stays,Is comfortable moving and handling heavy or awkward equipment between vehicles and sites (reasonable adjustments available where needed)DesirableKnowledge &Skills:A good understanding of applied engineering principles,materialsand manufacturing techniquesExperience of CNC machining with a passion for precision engineeringAn interest in sensors, instrumentation,electronicsor IoT technologiesExperience using 3D printing for prototypingAwareness of quality systems such as ISO9001Experience with Raspberry Pi and/or ArduinoIf you are experienced at producing bespoke, scientific research field and lab equipment, we would like to hear from you!Working for UKCEH is rewardingYoullbe joining a leading independent, not-for-profit research institutethatscommitted to recruiting talented people like you, progressing your career and giving you the support you need to thrive at UKCEH. Our science makes a real difference, enabling people and the environment to prosper, and enriching society. We are the custodians of a wealth of environmental data, collected by UKCEH and its predecessors over the course of more than 60 years.We appreciate the continuous dedication and contributions of our staff, which is why we provide a comprehensive benefits package that includes financial incentives and wellbeing-orientedperks, such as:27 days annual leave (rising to 29 days after 5 years service) plus 3 days for Christmas closure10% employer pension contributionFlexible and hybrid working arrangements (role dependant)Peer reward and recognition schemeDental insurance, gym/fitness discounts, retail discount portalEnhanced maternity and paternity leave24-hour, 365-day support with physical, mental, social, health or financial issues and much more...Our Commitment to InclusionAt UKCEH, we are committed to creating an inclusive andequitableworkplace where everyonehas the opportunity tothrive. We welcome applications from people of all backgrounds, identities, abilities, and circumstances. As a Disability Confident employer, we actively encourage applications from neurodivergent candidates and people with disabilities, andwerehappy to provide adjustments or support at any stage of the recruitment process - just let us know. Ifyoureexcited about this role but your experiencedoesntalign perfectly with every requirement,wedlove to hear from you anyway. You may be just the right fit for this role or another within our wider team.Please note: Unfortunately, we are unable to offer visa sponsorship for thisroleand this does not qualify for endorsement to support a Global Talent Visa application. If you are considering pursuing self-sponsorship, pleaseindicatethis in your application so we can take it into account during the recruitment process.TPBN1_UKTJ

We are looking for passionate individuals to lead our Avionic & Electrical Design engineer team as the Chief Avionic Design Engineer at our Oxford site. As the Chief Avionic/Electrical Design Engineer, you will lead the development of innovative Helicopter Customisations from early concept through to manufacture, owning the technical quality of your designs. You will guide and mentor a small team of engineers while ensuring every solution meets our customer, regulatory and Certification requirements. • Lead avionics & electrical engineering, from quote/ concept through to design, integration and test in accordance with design office and Airbus procedures;, • Overall responsibility for providing avionic and electrical contribution to project timelines, estimates and quotes., • Overall responsibility for the development of avionic and electrical design engineers to meet business needs. Engage & motivate the team, and help to provide capability assurance through training and development;, • Act as design signatory status and Compliance Verification Engineer., • Liaise with other project stakeholders to resolve relevant design issues., • Responsible for avionic and electrical design procedures seeking to provide cost effective design solutions and develop new procedures to meet evolving requirements., • Undertake reporting or documentation tasks associated with a work package to comply with the certification, airworthiness and environmental protection requirements as listed in the Certification Plan for the modification, for which an appropriate level of understanding of applicable FAR/JAR/CS 27/29 requirements is necessary related to avionic and electrical design;, • To continue and develop own personal technical competence;, • Keeping up to date with changes to applicable regulatory authority legislation;, • Keep up to date with new technological advances;, • Expected to communicate effectively and professionally with customers and suppliers as well as to manage data transfer as required for product development or other needs., • Organise and participate in Design Reviews throughout each phase of the New Product Introduction process. Ensure that all necessary follow up actions are taken., • Ensure the successful integration of each of their module(s) within the product as a whole., • Generate and/or revise specifications., • Coach, mentor and develop less experienced design engineers (apprentices, graduates etc.)., • Assisting in recruitment of team members when required., Inclusive Space: We provide a dedicated Multi-Faith Prayer Room, ensuring a quiet, private space prayer during the day., • Employee Assistance Program (EAP): Your mental health matters. Gain access to 24/6 confidential support, counseling, and resources for both your professional and personal life., • The Canteen Hub: A dedicated space to take a break and recharge, featuring on-site vending machines for quick snacks and refreshments., • Fuel Your Day: Enjoy free tea and coffee throughout the day, because sometimes the best ideas happen over a fresh brew., • This position is subject to National Security Vetting. Candidates must be able to obtain SC clearance, which generally requires having lived in the UK for the last five years. All successful applicants will also undergo a mandatory BPSS check., • Applicants must meet any/all requirements of Export Compliance Regulations., • Qualified to a minimum of degree in an Avionic / Electrical / Aerospace Engineering field. Alternatively a HNC/HND or an equivalent qualification in Avionic / Electrical / Aerospace Engineering apprenticeship, with extensive experience in avionic & electrical systems design, developing concept and detailing engineering solutions;, • Sound understanding of the aircraft system and software safety analysis process, • Proficient with experience in CATIA V5, Autodesk AutoCAD and Product Life Management (PLM) Systems (Enovia SmarTeam, ARAS), • Understanding of national and international regulatory standards and codes of practice including CAA Part 21, CS27/CS29 and Defence Standard 00-970., • Ability to plan and schedule design activities across multiple design work packages, • Ability to read design drawings and specifications., • Proven experience supervising a team of Avionic/Electrical Design engineers., • Previous experience as a design signatory and Compliance Verification Engineer. Airbus Helicopters is the world's largest helicopter manufacturer and the company's site at Oxford Airport is Britain's civil helicopter hub. AHUK offers considerable experience in helicopter sales, bespoke completions, maintenance and spares support. Its in-house engineering capabilities include design, customisation, installation, flight-testing and certification, as well as technical support, maintenance, training and the supply of spares for civil and military applications. AHUK is the MoD's chosen provider of helicopters and maintenance for its No.1 Helicopter Flying school (MFTS) located in RAF Shawbury (Shropshire) and RAF Valley (Anglesey). Airbus is, and always has been, committed to equal opportunities for all. At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. • Holiday Allowance : We value loyalty and work-life balance; your annual leave entitlement grows with you, rewarding your commitment with an extra day of leave for each year of service (up to an additional 4 days), • Health : Private Medical Insurance (Bupa). You also have the flexibility to add family members to your policy at an additional cost. Other options include Health-care Cash Schemes and Den-Plan., • Future Wealth: up to 8% Company Pension contribution, when you contribute 6%. Plus Yearly Share Incentive Plans, and Discretionary Group Bonuses., • Everyday Savings : Access to exclusive shopping discounts, including a cashback card to help your money go further., • Lifestyle : Bikes to Work scheme (up to £3,000), Mydrive car purchase scheme, and Technology purchase schemes., • Added Protection : Benefit from Personal Accident Insurance, Health-care Cash Schemes, and professional Financial/Legal advice., • Refer a friend Scheme : We offer a generous Referral Bonus for any successfully placed candidates you recommend to the business. #J-18808-Ljbffr

Assist electrical engineers with the design installation and maintenance of electrical systems in commercial buildings. Stay updated with the latest advancements in electrical engineering and recommend process improvements. Enthusiastic and passionate about a career in engineering.

Replimune’s mission is to revolutionize cancer treatment with therapies designed to activate a powerful and durable full-body anti‑tumor response, boldly transforming cancer care because patients’ lives depend on it. Audacious: We Are Bold. Dedicated: We Give Our Full Commitment. Candid: We Are Honest With Each Other. United: We Collaborate for a Common Goal. The Associate Director, Facilities and Engineering is responsible for the routine management of the Facilities Department at the Milton Park site. The department ensures all equipment and utilities operate as required to support domestic, cGMP, and general laboratory operations. It manages all building systems (e.g., monitoring systems, security, alarms and HVAC) and coordinates additional third‑party or remote support such as site cleaning, IT, telephone, and data management. This position is based in our Milton Park location and typically requires a 5‑day on‑site expectation. • Supervise and organize the Facilities Department, including Facilities Engineering, Maintenance, and Calibration., • Operate and maintain all utilities and systems required to support general operations, including associated cGMP documentation., • Maintain and calibrate all equipment and systems, coordinating work to agreed schedules., • Maintain close liaison with the Framingham Facilities Senior Manager/management to align Facilities practices, processes, and insights across Framingham and Milton Park sites., • Maintain Facilities documentation systems, including equipment files, calibration files, etc., in a cGMP‑compliant manner., • Provide functional input into cGMP investigations, CAPAs, and change controls to deliver in line with Site QMS targets., • Ensure the function is always cGMP audit ready and support Facilities as an SME in audits., • Coordinate, oversee, and review work performed by external or third‑party contractors, including project management and issuance of work permits., • Manage waste, including chemical and biological waste, trade effluent, and safe disposal of waste containing or potentially containing GMOs or live viral material. Complete duty‑of‑care audits for waste management., • Support site Health and Safety (IOSH Managing Safely or NEBOSH NGC trained) and serve as Facility Emergency Coordinator / Safety Contact., • Manage the site call‑out team, out‑of‑hours response, and business continuity plan., • Maintain Facilities KPIs and SLAs., • Line‑manage and develop the Facilities team., • Provide input into facilities budget planning and OPEX., • Deputize for Director as needed during absences or representation at meetings., • Serve as Replimune liaison/contact with landlords, local authorities, utilities, and general service providers., • Act as a key contact for coordination of general site communications and support for Social Committee activities., • Define and manage projects, assisting Engineering contractors with design, installation, and modification of equipment/utilities, and review and approve project documentation and reports., • Represent Facilities at inter‑departmental meetings and interact with external vendors as necessary., • Perform other tasks as assigned., • A BA or BSc in Engineering, Science, or an equivalent related discipline., • Minimum 4 years of building management experience, preferably in a cGMP environment., • Minimum 1 year of demonstrable line‑management experience with individuals and teams., • Field experience in building management systems, HVAC, refrigeration, plumbing, electrical safety including periodic inspection, PAT testing, Lockout/Tagout procedures, Health and Safety, and acting as Fire Safety Manager., • cGMP training and documentation experience., • Experience with biological and chemical waste management., • Experience with asset‑management software (e.g., Blue Mountain or similar)., • Demonstrated experience operating in highly cross‑functional environments; ability to build relationships at all levels across the organization., • Good communication and organization skills., • Computer literacy (MS Word, MS Excel, Outlook, etc.). Replimune Group, Inc., headquartered in Woburn, MA, was founded in 2015 with the mission to transform cancer treatment by pioneering the development of a novel portfolio of oncolytic immunotherapies. Replimune’s proprietary RPx platform is based on a potent HSV‑1 backbone designed to maximize immunogenic cell death and the induction of a systemic anti‑tumor immune response. The RPx platform has a unique dual local and systemic activity, directly killing tumors and releasing tumor‑derived antigens that alter the tumor microenvironment, igniting a strong and durable systemic response. The RPx product candidates are expected to synergize with most established and experimental cancer treatment modalities, offering versatility as standalone or combination therapies. For more information, please visit www.replimune.com. We are an Equal Opportunity Employer. #J-18808-Ljbffr

Help Shape the UKs Energy Future Independent Assessor Opportunity with the Civil Works Alliance (CWA), Supporting Sizewell C As part of the CWA (Civil Works Alliance), you will support the building of Sizewell C. Sizewell C will be a 3.2-gigawatt power station generating low-carbon electricity for around 6 million homes and will play a key role in our energy future, supplying reliable, clean electricity for at least 60 years.This role will be within theCWA Wide Section. What will you do? The Independent Assessor is responsible for delivering independent assurance and audit activities across Civil Works Alliance (CWA) scopes, including civils, manufacture, fabrication, tunnelling and offshore works. The role operates independently of the Civil Works programmes delivery sections, providing objective, evidence-based assessments of compliance with the CWA Quality Management System, Sizewell C requirements, regulatory obligations, and nuclear industry standards. The postholder ensures that: Quality risks are identified early through risk-based assurance Supply chain and project teams are subject to robust, independent challenge Nuclear safety culture, CFSI controls, and critical-to-quality requirements are consistently applied and effective. The role supports assurance across the full project lifecycle, from pre-award supplier assessment and mobilisation through to manufacture, fabrication, construction, installation and final handover. The activity of the postholder consists in a second line of defence-in-depth, tasked to provide good governance and confidence in delivery outcomes. Principal Accountabilities, Activities and Decisions Deliver independent audit and assurance assessments across civils, manufacture, fabrication, tunnelling and offshore scopes, aligned to scopes risk profile and safety classification, in line with CWA CQAP requirements. Conduct supplier audits, surveillance and governance reviews, including pre-award assessments and mobilisation readiness. Driving visibility, tracking and closure of quality enablers and residual actions to support readiness for scopes release and client or regulators permission where applicable. Provide independent, evidence-based challenge to programme and supply chain teams to ensure compliance with CWA Quality Management System; ISO 9001 / ISO 19443 requirements and SZCs and ONRs requirements. Demonstrate alignment between project assurance arrangements and the Hold Point process, so that quality evidence forms a coherent and reliable basis for SZCs decision-making and regulatory engagement Identify systemic weaknesses and lead or recommend targeted improvement actions, in collaboration with Subject Matter Experts. Contribute to the development of risk-based audit and independent assurance strategies across the programme. Support cross-project learning by identifying common themes, trends and improvement opportunities Promote a strong Right First Time and nuclear safety culture mindset through independent oversight. Supporting the business unit external accreditation process to ensure it can operate in its chosen sector What are we looking for? Knowledge & Skills Essential Strong understanding of Nuclear Quality Assurance and regulatory expectations, and ISO 9001 and ISO 19443 quality management systems Ability to deliver independent audits and provide credible challenge at all organisational levels Experience in risk-based assurance and governance oversight Strong analytical capability to assess compliance, behaviours and system effectiveness Ability to operate independently, objectively and with integrity Excellent communication skills, including the ability to present clear, evidence-based findings to senior stakeholders Qualifications & Experience Essential Demonstrable experience delivering independent assurance, audit and supplier surveillance in major infrastructure or nuclear project Good working knowledge of Welding inspection (e.g. CSWIP 3.0) Proven track record of: Leading or contributing to audit programmes and governance reviews; Assessing nuclear safety culture maturity and risk and; Performing supplier assurance and pre-award assessments. Experience operating independently of delivery teams within assurance functions Strong experience across multiple scopes such as manufacture, fabrication, construction, tunnelling and offshore, in highly regulated sectors. Relevant experience with supervision of the works Strong working experience with Quality Management Systems ISO 9001 Lead Auditor with proven track record. Desirable Relevant Engineering Qualification (or equivalent experience) Trained ISO 19443 Auditor with proven track record Chartered Quality Professional (CQP) and Member of the Chartered Quality Institute (MCQI) What we will offer you? The CWA is a single delivery organisation made of up of the client (Sizewell C) and three parent companies - Balfour Beatty, Bouygues and Laing O'Rourke - which offer industry leading packages including market leading salaries, generous annual leave entitlements, pension scheme and other flexible benefits. About Us The CWA celebrates the creativity and innovation that comes from a diverse workforce, and we welcome applications from people of all backgrounds especially those from under-represented communities. Our project is built on five core values: Humility, Positivity, Respect, Solidarity, and Clarity. By joining us, youll be encouraged to bring your whole self to work, speak up, and share your ideas. We encourage applications from all suitably qualified candidates, regardless of gender, race, disability, age, sexual orientation, gender reassignment, religion or belief, marital status, or pregnancy and maternity. We are committed to protecting your privacy. If you decide to apply, please avoid including sensitive personal data in your CV. TPBN1_UKTJ

We are seeking a Clerk of Works for our client to be based in Culham, Abingdon. This is a contract role to run for 18 months. 5 days based on site. Monday - Friday 8.00 - 4.30 Inside IR35 Principal Duties include: Manage the Quality of works as defined in the scope, with particular reference to the quality annex. - Carry out regular site inspections of construction work, workmanship, materials, temporary protection and completed works against contract drawings, specifications, schedules, samples, mock-ups, method statements and relevant standards. - Identify defects, non-conformances, poor workmanship, incomplete works, design coordination issues, quality risks and potential latent defects at the earliest practical stage. - Prepare clear inspection records, daily or weekly site reports, photographic evidence, measurement notes, sample records and snagging/defect schedules. - Monitor whether works are progressing generally in accordance with the agreed programme and advise the project team of observed slippage, sequencing constraints, access issues or resource concerns. - Liaise professionally with the contractor's site management team to communicate observations and obtain factual responses, without undermining formal contract communication procedures. - Check that specified materials and products are used, appropriately stored, protected and installed in accordance with manufacturer requirements and the contract documents. - Attend site progress meetings, quality meetings, technical workshops, inspections, hold-point reviews, testing activities and completion inspections as required. - Observe and report obvious health, safety, welfare, environmental or access concerns to the appropriate duty holder or client representative, while recognising that statutory safety management duties remain with the responsible parties. - Support handover by reviewing readiness for commissioning, witnessing inspections where required, monitoring close-out of snags and assisting with practical completion evidence. - Undertake routine health and safety inspection observations while on site, including review of visible site conditions, access and egress, housekeeping, segregation, PPE compliance, welfare arrangements, working at height controls, excavations, lifting operations, temporary works interfaces, fire precautions and emergency arrangements where relevant to the project scope. - Record health and safety inspection observations in the agreed site report or H&S inspection checklist, identifying immediate concerns, recurring trends, required follow-up actions and escalation requirements. - Escalate any serious or imminent health and safety concern immediately to the UKAEA Construction Project Manager and Principal Contractor Project manager and UKAEA SHEQ representative, while recognising that statutory health and safety management duties remain with the appointed duty holders. Output requirements: - Reports are issued within the agreed timescale, are factual, clearly referenced and supported by appropriate photographic evidence. - Observations are communicated promptly and tracked to an evidenced conclusion without exceeding delegated authority. - Planned hold points and inspections are covered or any inability to attend is escalated sufficiently early for an alternative arrangement. - Diary, issue and defect records remain current, searchable, coordinated and suitable for audit or contractual review. - Handover advice accurately records outstanding inspections, defects, tests and documentation. Health and safety inspections - The Clerk of Works shall include health and safety inspections within the regular site inspection regime, proportionate to the project risk profile and agreed scope of appointment. - H&S inspections should be factual observations of site conditions and controls, not a transfer of statutory duty from the Principal Contractor, Principal Designer, contractor, employer or other duty holders. - Inspection records should note area inspected, date/time, activity observed, visible control measures, non-compliance or concern, photographs where appropriate, action required, action owner and target close-out date. - Where an unsafe condition presents an immediate risk to life, health or public safety, the Clerk of Works must stop the inspection activity if necessary, move to a safe position and immediately escalate the matter through the project's agreed emergency/escalation procedure. Records and reporting requirements - Produce concise written reports at an agreed frequency, normally daily, weekly or aligned to project governance reporting cycles. - Include objective facts: date/time, weather where relevant, operatives/plant observed, work areas inspected, drawings/spec clauses referenced, photographs, defects, recommended follow-up actions and responsible party where known. - Maintain inspection registers, defect logs, non-conformance observations, sample approval records, material delivery checks, site instruction references and action close-out status. Knowledge, skills and competencies - Strong technical understanding of construction materials, trades, workmanship standards, sequencing, tolerances, temporary protection and practical buildability. - Ability to read and interpret drawings, specifications, schedules, details, installation guidance, inspection and test plans and contractor quality records. - Excellent written reporting skills, with the ability to record findings objectively, concisely and with sufficient evidence for later audit, dispute avoidance or defect resolution. - Professional judgement, impartiality, confidence to challenge poor workmanship and a collaborative manner that promotes "right first time" delivery. - Good digital capability, including photographs, tablets/field reporting systems, document management platforms and common Microsoft 365 tools. Qualifications and experience - Typically requires significant practical construction experience, often gained through a trade, site supervision, building surveying, construction management, civil engineering, M&E inspection or quality management background. - Desirable qualifications may include HNC/HND, degree, NVQ/SVQ, construction management, building studies, civil engineering, building services, site inspection or relevant trade qualifications. - Membership or progression towards membership of the Institute of Clerks of Works and Construction Inspectorate (ICWCI) may be desirable depending on the employer and project type. - A current CSCS card or appropriate site competency card may be required for access to construction sites. Typical deliverables - Site inspection reports with photographic evidence. - Defect, snagging and non-conformance registers. - Material delivery and storage inspection records. - Quality observation reports and recommendations for corrective action. - Input to progress reports, risk reviews, practical completion reviews and handover readiness assessments. - Attendance notes from inspections, hold points, mock-up reviews, testing and commissioning observations. - Health and safety inspection records, observation checklists and escalation logs, where included in the role scope. TPBN1_UKTJ

Job Title: Logistics Operative - Full time over 4-day shifts per week Location: Didcot Quarter (Near Milton Park) Salary: £14.69 per hour Job Type: Permanent, Full-Time over 4 days Working Hours: 36 hours per week, Wednesday to Saturday or Sunday to Wednesday About The Role: We are currently recruiting logistics operatives to join our team providing warehousing and logistics services from our custom designed warehouse near Milton Park to one of our key customers at their production sites in Bicester and Eynsham. Work will be based from our HQ and warehouse near Sutton Courtenay, Didcot and travel to the customer sites will be either as a passenger in our delivery vehicle or in a pool car. Weekdays shifts are 8am to 5pm working as part of our wider logistics team, and weekend shift is 6am to 6pm working with a small number of colleagues who provide weekend service to the Customer sites in support of their production line. Key duties are: Safe loading and unloading of vehicles using MHE Receiving and processing goods in accurately Locating goods into storage safely using powered MHE Picking and processing goods out accurately Correct use of inventory management and stock control systems Delivery and collection of materials to and from designated locations at Customer sites Timely and relevant communication with line managers and colleagues Maintenance of a clean, tidy and safe workplace Additional Information: This is an opportunity to work with a small team of friendly and professional colleagues in clean, quality and safety focussed environments, providing logistics support to our key customers who manufacture highly technical an advanced medical scanning equipment. Simon Hegele provides specialist logistics and installation services to global leaders in high-tech manufacturing and healthcare. Our UK headquarters in Didcot Quarter, Oxfordshire, serves as a hub for our growing team and customer base. We pride ourselves on professionalism, quality, and a commitment to excellence Applicants would ideally hold a car driving licence, and we would consider part-time applications or amended work patterns that include at least one weekend day shift. Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; Logistics Assistant, Logistics Operative, Distribution Operative, Warehouse, Distribution, Process Operative, Production Operative, Processing Assistant, Processing Coordinator, Line Operative, Quality, Manual Handling, MHE, Manual Handling Equipment will also be considered for this role. TPBN1_UKTJ

Plant Maintenance & Works Co-ordinator Culham Science Centre, Abingdon, OXFORDSHIRE, United Kingdom Full-time Salary: £57,117 (inclusive of Specialist Allowance) + excellent benefits including outstanding pension Division: Plasma Science and Fusion Operations Site Location: UKAEA Culham, Oxfordshire Confirmed Grade: Grade G Department: Tokamak Systems Company Description By 2050, the planet could be using twice as much electricity compared to today. Are you interested in contributing and helping to shape the future of the worlds energy? If so, read on. Fusion, the process that powers the Sun and Stars, is one of the most promising options for generating the cleaner, carbon-free energy that our world badly needs. UKAEA leads the way in realising fusion energy, partnering with industry and research for groundbreaking advancements. Our goal is to bring fusion electricity to the grid, supported by tomorrow's power stations. In pursuit of our mission, UKAEA embraces core values: Innovative, Committed, Trusted, and Collaborative. As an employee of UKAEA, you will benefit from: - Outstanding defined benefit pension scheme, details of which can be found at the end of this advert . - Corporate bonus scheme up to 7% and a Relocation allowance (if eligible). - Flexible working options , including family friendly policies and the right to request flexible working from the start of your employment. - Employee Assistance Programme and trained Mental Health First Aiders. - Generous annual leave allowance starting with 25 days, plus 3 days Christmas closure and 2.5 privilege days, in addition to UK bank holidays. - Wide range of career development opportunities . - A vibrant culture committed to equality and being fully inclusive . What to expect in our recruitment process: For a step-by-step overview of how we hire from application to offer, please see our Recruitment Process page. Job Description The salary for this role is £57,117 (inclusive of a Specialist Allowance). Onsite working is expected for 5 days each week, however, we actively support requests for flexible working . This role can be based at any of the following sites: Culham, Oxfordshire . This role requires employees to complete an online Baseline Personnel Security Standard (BPSS), including The Disclosure & Barring Service (DBS) checks for criminal convictions and possibly a search of open source data. The Role MAST - U, the worlds largest operating spherical tokamak, is seeking a Plant Maintenance & Works Co - ordinator to lead the management and co-ordination of maintenance and installation activities, including compliance with CDM (Construction, Design and Management) regulations, for key pulsed power supplies systems. The role ensures effective communication of plant status and issues with Local Plant Managers, the Team Leader, and the Authority to Operate holder, while also contributing operationally as a rostered Power Supplies Operations Engineer during tokamak operations. Acting as a Plant Responsible Officer, the individual will drive improvements to power supply equipment, support wider team projects and studies, and take on Project Engineer responsibilities for complex, high - impact initiatives that contribute to divisional objectives. Key Responsibilities: - Act as the Maintenance Manager (Asset Management) for the MPS Plant, working with the Team & Technical Leads and PROs to set the maintenance strategy and take responsibility for its implementation. - Act as a Work Package Leader and Supervisor for multidisciplinary teams (multiple) of maintenance and installation technicians and engineers. - Act as a Plant Responsible Officer (PRO) and technical expert for some major parts of the Pulsed Power Supplies Plant for MAST-U; these very large, complex and high hazard plant items are critical to the availability of the MAST-U experiment. - Act as a Project Engineer and enable the successful delivery of large-scale multi-year projects within the division or wider organisation. Qualifications Essential Requirements: - An HNC/D in (or significant progress towards) an Electrical discipline, or equivalent qualification level with significant industrial experience - Time served apprenticeship to City & Guilds level or above - 18th Edition Wiring Regulations - Additional Supervisory Training, for example, ECITB SSSTS/SMSTS - IOSH Managing Safely - Good record keeping in both electronic and paper media when necessary and good literary skills for production of reports for Senior Management, or other third parties Desirable Requirements: - C&G 2391 Inspection & Test (BS7671) or equivalent - CDM Qualification and experience Additional Information A full list of our benefits can be found on our website. UKAEAs mission is clean energy for all, and we welcome talented people from all backgrounds to help us achieve this goal. We are committed to equality, diversity, and inclusion and strive to ensure fair representation across our workforce. We particularly encourage applications from groups currently underrepresented in STEM, including women and individuals from diverse ethnic backgrounds, while ensuring all appointments are made on merit. UK Atomic Energy Authority is committed to being accessible. Please contact us if you have any questions or require help or adjustments to compete on a fair basis, for example, changes to the way we interview or share information. Please note that vacancies are generally advertised for 4 weeks but may close earlier if we receive a large number of applications. TPBN1_UKTJ

Senior Laser Systems Engineer Are you a Senior Laser Systems Engineer looking for your next challenge? My client has an exciting opportunity for an experienced engineer to join their growing team, working on the design, development and support of advanced laser systems for highly specialised industrial applications. This is a hands-on role where you will be involved in the development of bespoke laser systems, supporting projects from concept through to manufacture, installation and commissioning whilst working alongside multidisciplinary engineering teams. In this Senior Laser Systems Engineer role based in Abingdon, Oxfordshire, you will be responsible for the following: Development of bespoke laser systems, including component selection, system layouts and detailed engineering drawings. Managing the design process, ensuring projects are delivered to specification, on time and within budget. Supporting the build, testing, installation and commissioning of laser systems, providing technical expertise throughout the project lifecycle. Carrying out servicing, fault finding and technical support activities to ensure systems continue to operate at optimum performance. The successful applicant for this Senior Laser Systems Engineer job based in Abingdon, Oxfordshire should have: Experience designing and developing complex laser & optical based systems within a manufacturing or engineering environment. A strong understanding of design, system integration and engineering documentation, with experience producing technical drawings. Experience with installation, servicing, fault finding or commissioning of complex laser engineering equipment would be advantageous. A Bachelor's, Master's or PhD in Optical Engineering, Photonics, Physics, Laser Engineering or a related engineering or scientific discipline. To apply for this Senior Laser Systems Engineer job based in Abingdon, Oxfordshire please send your CV to or call Nick on 01582 878828 for more information. TPBN1_UKTJ

Job Title: Weekend Class 1 HGV driver - Local work Location: Didcot Quarter (Near Milton Park) DQ120 Salary: £18.75 per hour Job Type: Permanent, Full-Time over 4 days Working Hours: 40 hours over 4 days shifts Friday to Monday About us: We are currently recruiting a weekend Class 1 HGV driver to join our team providing warehousing and logistics services from our custom designed warehouse near Milton Park to our UK Customer sites, with the majority of the work being local within Oxfordshire. The job is based from our HQ and warehouse near Sutton Courtenay, Didcot and offers an opportunity to use your driving skills during the day, returning home in the evening to enjoy a good work/life balance. Weekday shifts are 8am to 5pm and weekend shift are 6am to 6pm making a 40-hour week over 4 days. Applicants must be willing to support the logistics team in loading and unloading the vehicle, and to learn how to process the goods into location when their driving schedule allows. Key duties: Carrying out deliveries between the DQ120 warehouse and customer sites in UK, mostly within Oxfordshire Operating and driving Class 1 (Category CE) vehicles safely and efficiently Carrying out pre-trip and post-trip vehicle inspections Ensuring all loads are loaded and secured correctly Adhering to traffic laws and regulations Communicating effectively with dispatch and customers Reporting any vehicle defects or maintenance needs to management Assisting with loading and unloading of materials as required Supporting logistics team in processing and moving materials through the warehouse or customer sites when possible About you: Essential Skills: Valid UK Category CE driving licence Minimum of 12 month's experience driving CE vehicles Valid UK Driver CPC card and Digital Tachograph card requirements No more than six penalty points for minor offences and no major endorsement codes Able to communicate sufficiently well in spoken and written English to meet the requirements of the role Punctual with excellent timekeeping Good understanding of traffic laws and regulations This is an opportunity to work with a small team of friendly and professional colleagues in clean, quality and safety focussed environments, providing logistics support to our key customers who manufacture highly technical an advanced medical scanning equipment. Simon Hegele provides specialist logistics and installation services to global leaders in high-tech manufacturing and healthcare. Our UK headquarters in Didcot Quarter, Oxfordshire, serves as a hub for our growing team and customer base. We pride ourselves on professionalism, quality, and a commitment to excellence. Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; Delivery Driver, Multi-drop Driver, Service Driver, Multi Drop Driver, Product Transportation, Class 1 Driver, Class 1 Multi Drop Drivers, HGV Class 1 Driver, HGV Driver, Driver, Heavy Goods Vehicle Driver, HGV 1, Class 1, HGV Driver may also be considered for this role. TPBN1_UKTJ

Production Technician - Oxfordshire - £29,000 Starting Salary + International Travel Opportunities + Specialist Engineering Environment + Huge Progression Opportunity Do you have experience with the assembly and testing any electro-mechanical equipment? Have you worked within a production, manufacturing or workshop environment before? Can you confidently read and interpret engineering drawings and technical documentation at any level? Are you hands-on, technically curious and keen to develop your engineering skills further as well as progressing your career with a rapidly growing consultany and specialist manufacture within the water industry? If the answers are yes, we are hiring for a Production Technician on behalf of a specialist engineering organisation that designs and manufactures bespoke equipment used on projects around the world. WHAT YOU NEED Experience assembling mechanical or electro-mechanical systems Ability to read and follow engineering drawings and technical instructions Background within a production, manufacturing or assembly environment Knowledge of manufacturing processes and quality standards Strong attention to detail and pride in producing high-quality work Good communication skills and ability to work within a team Self-motivated approach with a willingness to learn Experience with testing, fault finding or troubleshooting equipment What You Get In Return £29,000 starting salary with regular reviews Opportunity for international travel Training and development within a specialist engineering environment Exposure to complex and bespoke technical equipment Stable and supportive team environment Long-term career progression opportunities Nice To Haves Apprenticeship, HNC, HND or BTEC in Mechanical or Electrical Engineering Experience with electric motors, rotating equipment or drive systems Knowledge of bearings, seals and mechanical assemblies Customer-facing experience Installation or commissioning experience Responsibilities include: Assemble and test bespoke electro-mechanical equipment Carry out calibration activities and quality checks Interpret engineering drawings, specifications and work instructions Support fault-finding and troubleshooting activities Work closely with engineering and project teams to deliver equipment on schedule Maintain accurate production records and component traceability Ensure a safe, clean and organised working environment Support equipment installations and service activities when required Assist with stock control and maintenance of calibrated tools and equipment This role would suit an Assembly Technician, Mechanical Technician, Electro-Mechanical Technician or Production Technician looking to work on highly specialised equipment within a business that offers genuine technical development and opportunities to support projects worldwide. INDWIN Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you! The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https:// Many Thanks TPBN1_UKTJ

Electrical Maintenance Technician. This vacancy will ideally suit an experienced time served electrical technician with a general heavy engineering background who is looking for career progression. Carry out electrical, installation, test and inspections with a focus on safety, reliability, and oper

Our client, a leading manufacturer within the marine sector, is seeking an experienced Composite Laminator (Secondary Bonding) to join their growing production team in Berinsfield on a permanent basis. Cut and prepare reinforcement and core materials for composite manufacture Carry out secondary bonding activities and structural component installation Apply gelcoat using brush and spray techniques Undertake wet lamination processes, including resin mixing, fibre lay-up and consolidation Repair and finish gelcoat surfaces where required Interpret laminate drawings and specifications to ensure accurate production Support finishing and production teams through effective preparation of components Trim, grind and prepare demoulded components for further assembly Job Requirements: The successful candidate will possess: Previous experience within a composites manufacturing environment Strong knowledge of wet lamination and secondary bonding processes Experience working with GRP materials and composite structures Ability to interpret engineering drawings and production documentation Excellent attention to detail and commitment to quality standards Strong communication and problem-solving skills Ability to work independently and as part of a collaborative team A proactive and organised approach to work Strong work ethic with the ability to meet production deadlines Desirable Experience: Experience in GRP boat-building or marine manufacturing Knowledge of open moulding techniques Process control experience within a manufacturing environment Previous experience mentoring or training junior team members Experience working within a high-quality production setting Benefits: Competitive salary Monday to Friday working hours with an early finish every day Opportunity to work on premium marine products Supportive and highly skilled team environment Long-term career opportunities within a growing business The chance to play a key role in delivering world-class composite products If you are an experienced Composite Laminator looking to further your career within a high-quality marine manufacturing environment, we would love to hear from you. Apply now to join our client's dedicated team in Berinsfield

CNC Operator Full-Time | Permanent | Oxfordshire The Opportunity We are working with a long-established, award-winning specialist in architectural stonework, delivering high-end projects across the UK and internationally. With over 150 years of heritage combined with modern manufacturing techniques, the business operates at the forefront of precision stone production, blending traditional craftsmanship with advanced CNC technology. Due to continued growth, they are now looking to appoint an experienced CNC Machinist to join their skilled production team. The Role Working within a modern workshop environment, you will be responsible for operating CNC machinery to produce high-quality stone components for bespoke architectural and interior projects. Key Responsibilities: • Set, programme and operate CNC machinery (3/6 axis desirable), • Manufacture bespoke stone components to tight tolerances, • Interpret technical drawings, CAD models, and production specifications, • Carry out tool changes, machine adjustments and basic maintenance, • Ensure all work meets quality and finish standards expected on high-end projects, • Work collaboratively with design, production and installation teams, • Adhere to all health & safety procedures within the workshop About You • Proven experience operating CNC machinery (stone, wood, or similar materials), • Experience with CAD/CAM software (e.g. AlphaCAM, Fusion 360 or similar) advantageous, • Strong attention to detail and quality-focused mindset, • Ability to read and interpret technical drawings, • Proactive, reliable and able to work both independently and as part of a team, • Previous experience within stone, construction, or manufacturing environments beneficial What’s on Offer • Competitive salary (dependent on experience), • Opportunity to work on prestigious, design-led projects, • Modern, well-equipped workshop with advanced CNC technology, • Stable, long-standing business with strong reputation in its sector, • Ongoing training and development opportunities CNC Operator For the purposes of the Conduct Regulations 2003, Premises Recruitment Limited acts as an employment agency for permanent recruitment and as an employment business for temporary recruitment. By applying for this job, you agree to our Privacy Policy, which can be found on our company website

Production Technician - Oxfordshire - £29,000 Starting Salary + International Travel Opportunities + Specialist Engineering Environment + Huge Progression Opportunity Do you have experience with the assembly and testing any electro-mechanical equipment? Have you worked within a production, manufacturing or workshop environment before? Can you confidently read and interpret engineering drawings and technical documentation at any level? Are you hands-on, technically curious and keen to develop your engineering skills further as well as progressing your career with a rapidly growing consultany and specialist manufacture within the water industry? If the answers are yes, we are hiring for a Production Technician on behalf of a specialist engineering organisation that designs and manufactures bespoke equipment used on projects around the world. WHAT YOU NEED Experience assembling mechanical or electro-mechanical systems Ability to read and follow engineering drawings and technical instructions Background within a production, manufacturing or assembly environment Knowledge of manufacturing processes and quality standards Strong attention to detail and pride in producing high-quality work Good communication skills and ability to work within a team Self-motivated approach with a willingness to learn Experience with testing, fault finding or troubleshooting equipment What You Get In Return £29,000 starting salary with regular reviews Opportunity for international travel Training and development within a specialist engineering environment Exposure to complex and bespoke technical equipment Stable and supportive team environment Long-term career progression opportunities Nice To Haves Apprenticeship, HNC, HND or BTEC in Mechanical or Electrical Engineering Experience with electric motors, rotating equipment or drive systems Knowledge of bearings, seals and mechanical assemblies Customer-facing experience Installation or commissioning experience Responsibilities include: Assemble and test bespoke electro-mechanical equipment Carry out calibration activities and quality checks Interpret engineering drawings, specifications and work instructions Support fault-finding and troubleshooting activities Work closely with engineering and project teams to deliver equipment on schedule Maintain accurate production records and component traceability Ensure a safe, clean and organised working environment Support equipment installations and service activities when required Assist with stock control and maintenance of calibrated tools and equipment This role would suit an Assembly Technician, Mechanical Technician, Electro-Mechanical Technician or Production Technician looking to work on highly specialised equipment within a business that offers genuine technical development and opportunities to support projects worldwide. INDWIN Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you! The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see (url removed) /> Many Thanks

Working Electrical Supervisor – Water & Wastewater Infrastructure Hours: 45 per week (flexible options can be discussed) DBS: Not required Sponsorship: Not available A great opportunity has arisen for a Working Electrical Supervisor to support a major wastewater asset improvement programme across the region. This role blends hands‑on electrical installation with day‑to‑day supervision, giving you the chance to lead by example while helping develop a growing self‑delivery team. You’ll be involved in capital upgrade works across treatment and network sites, supporting the delivery of new installations, refurbishments, and essential MEICA projects that keep critical water infrastructure operating safely and efficiently. What you’ll be doing Installing LV electrical systems for both temporary and permanent works, including containment, power, control, and instrumentation cabling Supervising electricians and guiding apprentices, ensuring all work meets industry standards and project requirements Carrying out safe isolations of LV systems and issuing electrical safety documentation such as Permits to Work and Isolation Certificates Producing and reviewing electrical RAMS, ITPs, and supporting electrical audits Assisting with commissioning documentation and working with supply chain partners to resolve faults and technical issues What we’re looking for Full UK driving licence and a valid JIB Gold Card or ECS card Strong background in the water or wastewater industry, with solid judgement and problem‑solving ability C&G 2330 or 2360, NVQ Level 3, and C&G 2391 (Inspection & Testing) 18th Edition wiring regulations SMSTS and Confined Spaces qualifications Good understanding of water and wastewater treatment processes, MEICA equipment, and typical plant found on operational sites

Job Title: Logistics Operative - Full time over 4-day shifts per week Location: Didcot Quarter (Near Milton Park) Salary: £14.69 per hour Job Type: Permanent, Full-Time over 4 days Working Hours: 36 hours per week, Wednesday to Saturday or Sunday to Wednesday About The Role: We are currently recruiting logistics operatives to join our team providing warehousing and logistics services from our custom designed warehouse near Milton Park to one of our key customers at their production sites in Bicester and Eynsham. Work will be based from our HQ and warehouse near Sutton Courtenay, Didcot and travel to the customer sites will be either as a passenger in our delivery vehicle or in a pool car. Weekdays shifts are 8am to 5pm working as part of our wider logistics team, and weekend shift is 6am to 6pm working with a small number of colleagues who provide weekend service to the Customer sites in support of their production line. Key duties are: Safe loading and unloading of vehicles using MHE Receiving and processing goods in accurately Locating goods into storage safely using powered MHE Picking and processing goods out accurately Correct use of inventory management and stock control systems Delivery and collection of materials to and from designated locations at Customer sites Timely and relevant communication with line managers and colleagues Maintenance of a clean, tidy and safe workplaceAdditional Information: This is an opportunity to work with a small team of friendly and professional colleagues in clean, quality and safety focussed environments, providing logistics support to our key customers who manufacture highly technical an advanced medical scanning equipment. Simon Hegele provides specialist logistics and installation services to global leaders in high-tech manufacturing and healthcare. Our UK headquarters in Didcot Quarter, Oxfordshire, serves as a hub for our growing team and customer base. We pride ourselves on professionalism, quality, and a commitment to excellence Applicants would ideally hold a car driving licence, and we would consider part-time applications or amended work patterns that include at least one weekend day shift. Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; Logistics Assistant, Logistics Operative, Distribution Operative, Warehouse, Distribution, Process Operative, Production Operative, Processing Assistant, Processing Coordinator, Line Operative, Quality, Manual Handling, MHE, Manual Handling Equipment will also be considered for this role

Hiring 2 Electricians for a full-time, on-site role with UKAEA in Culham until September 2027. The role covers electrical installation, commissioning, testing, fault-finding and maintenance in an industrial environment, with some team-leading responsibilities. Requirements: ECS Gold Card, industrial/commercial experience and strong safety awareness, including WSSOW experience. BPSS clearance required

Position: 2nd Line Engineer Location: Abingdon Salary: £37k Benefits 25+ Days Holiday and rising (plus bank holidays) Flexible working (WFH incentives) Bupa Cash Plan Electric Vehicle Scheme Cycle Scheme Discounted Gym Membership Paid Charity Day Car ParkingWork for one of the UK's leading technology specialists, proudly recognised as a World Class Place to Work by Best Companies, a nationally respected benchmark for employee engagement and workplace excellence. They were also ranked as the #1 Technology Company to Work For in the UK, reflecting culture, our people, and our commitment to being an employer of choice. Primary Purpose: The Tier 2 team are tasked with supporting, investigating, and resolving our MSP client's IT-related systems and making sure all issues are dealt with in a timely fashion. Key Responsibilities Being the first point of contact for all incoming support calls, emails, and sessions - when necessary Being an escalation point for all escalations coming from apprentice, and Tier 1 engineers Ensuring all forms of support call are logged in the system and the client is kept updated Manage incidents and request tickets ensuring established SLAs are met Providing support to our clients Help the Tier 2 Manager with continued business improvements Provide support to the apprentice, and Tier 1 engineers Manage/Maintain all escalations from the apprentice, and Tier 1 engineers Communicate daily to clients with open tickets Managing the client's expectations with ongoing tickets Ensure all client related problems are logged correctly Inform the Tier 2 Manager of any tickets requiring escalations Working with client's 3rd party suppliers and vendors when appropriate Adhere to all company policies and procedures Ensuring that all role related KPI's are met Logging, managing, and resolving client IT issues Maintain and improve cloud infrastructure Composing Requests for Change Manage all client on/offboarding's, ensuring all tasks are complete Maintain all client documentation ensuring it is relevant Undertake any other reasonable duties as required to meet the needs of the business Person Specification: Minimum: Excellent knowledge in Windows 11 installation and configuration Excellent knowledge with MacOS installation and configuration Excellent knowledge with Microsoft 365 administrative suite - Intune/SharePoint/Teams/Exchange/Entra ID etc... Exposure to Email filter technologies - Mimecast/Barracuda/Sophos Email Gateway Exposure to Microsoft Server OS and server roles - 2016/2019/2022/2025 Exposure and troubleshooting knowledge with networking related items - firewalls/switches/wireless etc... 2+ years' experience working with medium-large businesses Excellent knowledge of user & group management (on-premises/Entra) Excellent knowledge of scripting and RPA automations Ability to learn on your feet Strong communication skills Excellent troubleshooting and problem resolution skills Excellent customer experience Positive attitude to work Strive to continuous improvement Able to work independently under pressure Minimum of 3 years' IT experience in a corporate or services environment Driving license and own transport Ability to obtain DBS certificate Desirable: Sophos Central/XG Firewall Certifications (Engineer or Architect) Microsoft MS-102, MD-102, MS-700, AZ-900 Certifications Apple Certified Support Certifications Comptia A+ Wireless management - Ubiquiti, Meraki, etc... Group policy/Intune policy management - deployment or managementINDIT Planet Recruitment acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Planet Recruitment is an Equal Opportunities Employer. By applying for this role your details will be submitted to Planet Recruitment. Our Candidate Privacy Information Statement explains how we will use your information. Only candidates with the relevant skills and experience will be contacted after application, if you do not hear back from us within 7 days you have unfortunately been unsuccessful in your application. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the position

Drilling Assistant – Permanent Wallingford £40,000 per year Monday to Friday, 48 hours a week This is a fantastic opportunity to contribute to one of the water industry's. We are looking for a motivated and reliable Assistant Driller to support day-to-day drilling operations across sites throughout the UK. This is a hands-on, outdoor role ideal for someone who enjoys practical work, working as part of a close-knit team, and wants to develop a career in drilling, with the opportunity to progress to Lead Driller. You will assist with the installation and maintenance of mechanical drilling equipment, ensuring all work is carried out safely, efficiently, and in line with company procedures. The Role: Support the Lead Driller with daily drilling operations Assist with setting up, operating, and dismantling drilling equipment Carry out manual handling tasks and basic equipment maintenance Collect and label soil, rock, or water samples Maintain a safe, tidy, and organised work site Follow health & safety procedures, RAMS, and PPE requirements Travel to sites across the UK and work outdoors in varying conditions What you’ll need: A practical, hands-on individual with a strong work ethic Safety-conscious and able to follow instructions Willingness to learn and develop within the role Ability to work well as part of a team Previous drilling experience (water well or geothermal) desirable NPORS/CPCS Telehandler qualification desirable This is a great opportunity to join a reputable organisation Apply now to be considered or give Nicole a call on (phone number removed)

Job Title: Weekend Class 1 HGV driver - Local work Location: Didcot Quarter (Near Milton Park) DQ120 Salary: £18.75 per hour Job Type: Permanent, Full-Time over 4 days Working Hours: 40 hours over 4 days shifts Friday to Monday About us: We are currently recruiting a weekend Class 1 HGV driver to join our team providing warehousing and logistics services from our custom designed warehouse near Milton Park to our UK Customer sites, with the majority of the work being local within Oxfordshire. The job is based from our HQ and warehouse near Sutton Courtenay, Didcot and offers an opportunity to use your driving skills during the day, returning home in the evening to enjoy a good work/life balance. Weekday shifts are 8am to 5pm and weekend shift are 6am to 6pm making a 40-hour week over 4 days. Applicants must be willing to support the logistics team in loading and unloading the vehicle, and to learn how to process the goods into location when their driving schedule allows. Key duties: Carrying out deliveries between the DQ120 warehouse and customer sites in UK, mostly within Oxfordshire Operating and driving Class 1 (Category CE) vehicles safely and efficiently Carrying out pre-trip and post-trip vehicle inspections Ensuring all loads are loaded and secured correctly Adhering to traffic laws and regulations Communicating effectively with dispatch and customers Reporting any vehicle defects or maintenance needs to management Assisting with loading and unloading of materials as required Supporting logistics team in processing and moving materials through the warehouse or customer sites when possibleAbout you: Essential Skills: Valid UK Category CE driving licence Minimum of 12 month's experience driving CE vehicles Valid UK Driver CPC card and Digital Tachograph card requirements No more than six penalty points for minor offences and no major endorsement codes Able to communicate sufficiently well in spoken and written English to meet the requirements of the role Punctual with excellent timekeeping Good understanding of traffic laws and regulationsThis is an opportunity to work with a small team of friendly and professional colleagues in clean, quality and safety focussed environments, providing logistics support to our key customers who manufacture highly technical an advanced medical scanning equipment. Simon Hegele provides specialist logistics and installation services to global leaders in high-tech manufacturing and healthcare. Our UK headquarters in Didcot Quarter, Oxfordshire, serves as a hub for our growing team and customer base. We pride ourselves on professionalism, quality, and a commitment to excellence. Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; Delivery Driver, Multi-drop Driver, Service Driver, Multi Drop Driver, Product Transportation, Class 1 Driver, Class 1 Multi Drop Drivers, HGV Class 1 Driver, HGV Driver, Driver, Heavy Goods Vehicle Driver, HGV 1, Class 1, HGV Driver may also be considered for this role

C&I Wire Person / Panel Builder Employer: UK Atomic Energy Authority Location: Culham Campus, Abingdon, Oxfordshire Contract: 1 year (Inside IR35) Rate: £26.00 per hour (Umbrella) Work Type: Full-time, onsite About the Role We are seeking a skilled C&I Wire Person / Panel Builder to support operations at the MAST-U facility, a leading experimental fusion research environment. This hands-on role involves working across multiple engineering teams, supporting a wide range of control and instrumentation systems. You will split your time between workshop-based panel building and on-plant industrial work, contributing to the construction, testing, fault-finding, and repair of critical systems. Key Responsibilities • Build, assemble, and wire control & instrumentation panels, cubicles, sub-racks, and electronic systems, • Carry out fault-finding, diagnostics, and repairs on C&I systems (with and without formal test procedures), • Perform bench testing and in-situ testing on operational plant equipment, • Support installation, maintenance, and commissioning activities across site systems, • Work closely with Plant Responsible Officers (PROs) to resolve technical issues, • Undertake procurement, build, test, and commissioning of new equipment, • Carry out precision wiring work, including delicate instrumentation such as thermocouples, • Produce and maintain technical documentation, including safe systems of work, • Take ownership of assigned tasks and deliver to required standards What We’re Looking For Essential: • C&G 2330 Level 3 in Electrotechnical Technology or equivalent (ONC/HNC Electrical/Electronic Engineering accepted), • 18th Edition Wiring Regulations, • Apprenticeship-trained background, • Industrial experience with 3-phase power systems, • Experience in both workshop and industrial environments Key Skills: • Strong control & instrumentation (C&I) panel building experience, • Excellent fault-finding and diagnostic ability, • Ability to interpret wiring diagrams and technical drawings, • High attention to detail for precision instrumentation work, • Confidence working independently and taking ownership of tasks, • Strong understanding of safe working practices in industrial settings About the Environment You will be working within a highly specialised engineering environment supporting fusion energy research at the MAST-U facility, collaborating with multi-disciplinary engineering teams in a safety-critical, technically challenging setting. Why Apply? This is a unique opportunity to contribute to cutting-edge fusion energy research while working on complex and varied electrical and instrumentation systems in a highly respected national laboratory environment

Site Manager / Small Works Manager Location: South Oxfordshire, with regular travel to other project sites Salary: Competitive, dependent on experience Employment Type: Full-time, Permanent Sector: M&E / Building Services / Construction The Opportunity We are currently recruiting on behalf of our client for an experienced and technically capable Site Manager / Small Works Manager to oversee the safe and efficient delivery of M&E and multi-disciplinary construction projects. The successful candidate will be responsible for the day-to-day management of site operations, coordinating trades and subcontractors, maintaining health and safety standards, monitoring programme and quality, and acting as the client's on-site representative. Projects are delivered across a range of sectors, including Defence, MOD, Healthcare/NHS, Education, Commercial, Residential, Blue-Light and Local Authority environments. The role will involve working in complex and often live environments, including hospitals, schools and secure sites. Regular travel to other project locations is an essential requirement. Key Responsibilities Site Management & Coordination Manage day-to-day site activities to ensure works are delivered safely, efficiently and in accordance with project requirements Coordinate subcontractors, suppliers, logistics, plant and materials Ensure works are correctly sequenced in line with the construction programme and method statements Lead site inductions, toolbox talks, daily briefings and coordination meetings Maintain accurate site diaries, progress records, photographs and reports Monitor site resources and ensure works remain on programme Health, Safety & Compliance Promote and enforce high standards of health and safety across site Ensure compliance with CDM 2015, HASAWA and relevant company policies and procedures Ensure RAMS are reviewed, understood and implemented by site teams Manage site inspections, audits and permit-to-work systems, including hot works, confined spaces and electrical isolations where applicable Maintain appropriate statutory and site records Implement suitable access controls, segregation and risk controls within live and sensitive environments Ensure operatives and subcontractors hold the appropriate qualifications, cards and safety certifications Technical & Quality Control Oversee installation works including mechanical and electrical systems, HVAC, heating, ventilation, pipework and associated building services Review works against drawings, specifications and relevant standards Identify technical issues and work with Project Managers, Engineers, designers and subcontractors to resolve them promptly Manage quality inspections, ITPs, snagging and defect tracking Coordinate the completion and sign-off of works Ensure builder's works, penetrations, fire stopping, containment and service routes are completed to the required standard Support commissioning, witness testing and quality handover activities Programme Management Monitor progress against the project programme and identify potential delays at an early stage Prepare and manage short-term 1–3 week lookahead programmes Coordinate trades and resources to maintain project progress Identify issues relating to resources, design, access or sequencing and escalate them appropriately Assist with the phasing of works within occupied or operational buildings Commercial & Contractual Awareness Support Project Managers and Quantity Surveyors with progress tracking and site measures Assist with monitoring variations, labour productivity and material usage Ensure subcontractors work within their agreed scope and minimise scope creep Check deliveries, plant and waste transfers Maintain accurate records of changes that may impact cost or programme Client & Stakeholder Management Act as the professional on-site representative for the client Maintain effective communication with clients, estates teams, facilities managers, school representatives and Defence/MOD site personnel Deal with site queries and concerns promptly and professionally Maintain positive working relationships with key stakeholders Ensure disruption to building users is kept to a minimum Ensure live, operational and secure environments remain safe and protected throughout the works Essential Requirements Experience • Minimum 3–5 years' experience as a Site Manager within M&E, building services or construction, • Experience delivering projects within one or more of the following sectors:, • Defence / MOD, • Healthcare / NHS, • Education, • Commercial, • Industrial, • Public Sector, • Experience managing live or operational sites with strict safety and access requirements, • Strong understanding of site management, subcontractor coordination and construction delivery Technical Knowledge Good understanding of HVAC, heating systems, pipework, ventilation and MEP coordination Experience with containment and plantroom installations Ability to read and interpret drawings, specifications, schematics and method statements Awareness of relevant compliance frameworks and guidance, including: CDM 2015 HTM guidance, including HTM 03-01 JSP 375 / MOD requirements CIBSE and BSRIA guidance UK Building Regulations Understanding of commissioning, witness testing and quality handover processes Qualifications & Certifications SMSTS – essential UKATA Asbestos Awareness – essential CSCS Manager Card – advantageous First Aid at Work – preferred Fire Marshal – preferred Mechanical or Building Services background – advantageous Full UK Driving Licence – essential Existing SC or DBS clearance, or the ability to obtain relevant clearance for Defence, Education and Healthcare projects The Ideal Candidate We are looking for a Site Manager who is: A confident and effective leader Highly organised with excellent communication skills Proactive, assertive and solutions-focused Comfortable managing multiple stakeholders Able to work independently and make informed decisions on site Resilient and professional when working in challenging environments Strong on health and safety, quality and programme management Technically aware with a practical approach to problem-solving Flexible and willing to travel between project sites What's on Offer Competitive salary, dependent on experience Company vehicle or vehicle allowance Expenses Company pension Private medical options Training, CPD and career development opportunities Exposure to high-profile projects across multiple sectors Long-term career progression within a growing organisation Apply Now If you are an experienced Site Manager / Small Works Manager with a strong M&E, building services or construction background, we would be keen to hear from you. This is an excellent opportunity to join an established organisation delivering varied projects across the Defence, Healthcare, Education, Commercial and Public Sector markets. Please note: Regular travel to project sites is an essential requirement of this position. Please submit your CV detailing your relevant site management experience, qualifications, certifications and any current security or DBS clearance

Planet Recruitment are looking for Electricians to join our client near Didcot in a full time position. You will become a key member of our clients experienced Solar Installation team, conducting AC Electrical Work on day-to-day installations. You will be responsible for documenting your own AC Work through the Company NICEIC Portal. Mainly Residential with smaller Commercial Work. A previous background/experience installing Solar PV Inverters & Batteries would be an advantage. You will also commission Solar Inverters and Batteries, with on-site product training per specific inverter/battery brands as required. The Role includes a Fully Expensed Company Van, Company Clothing and 25 Days + Statutory Annual Holiday Entitlement. The Company is growing, so this role also presents the opportunity for future Management as our installation teams expand. For further information call (phone number removed) or apply online. INDCON Planet Recruitment acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Planet Recruitment is an Equal Opportunities Employer. By applying for this role your details will be submitted to Planet Recruitment. Our Candidate Privacy Information Statement explains how we will use your information. Only candidates with the relevant skills and experience will be contacted after application, if you do not hear back from us within 7 days you have unfortunately been unsuccessful in your application. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the position

Mechanical Technician Location: Culham Contract Length: 12 Months Working Pattern: Full-time onsite IR35 Status: Inside IR35 Security Clearance: BPSS required Role Overview We are seeking an experienced Mechanical Technician to support shutdown, maintenance and installation activities within a highly regulated engineering environment. The primary focus of the role will be supporting a specialist mechanical assembly team during planned shutdown periods, including preparation and execution activities. In addition, the successful candidate will provide broader mechanical support across plant systems as required. The role involves working on a variety of sophisticated mechanical systems including: • Vacuum systems, • Cooling systems, • Pressurised systems, • Electro-magnetic systems Responsibilities will include installation, maintenance, fault finding, repair and modification of both existing and new systems. As a Mechanical Technician, you will also be expected to supervise mechanical fitters and junior craft personnel where required. Duties will vary depending on operational requirements and individual experience. Key Responsibilities Support maintenance, improvements and modification activities across plant systems Undertake mechanical assembly, installation and repair activities Carry out fault finding and maintenance on operational systems Support large installation programmes during shutdowns and interventions Assist with preparation and execution of shutdown activities Compile work packages and produce maintenance/testing documentation Prepare safe systems of work and support risk assessment activities Support major engineering and infrastructure projects Supervise mechanical fitters, contractors and junior craft personnel Maintain high standards of safety, housekeeping and professionalism Ensure compliance with regulatory and site safety requirements Work in accordance with Construction (Design and Management) Regulations 2015 Support Plant Responsible Officers (PRO) and deputies as required Essential Requirements • Recognised Mechanical Apprenticeship or equivalent, • Level 3 NVQ Certificate in Mechanical Engineering or equivalent qualification, • Experience within an industrial mechanical maintenance and assembly environment Experience working to: • Written Safe Systems of Work, • Method Statements, • Risk Assessments Ability to work independently within a high-hazard environment Strong practical mechanical engineering skills Desirable Experience • Experience working with vacuum systems, • Understanding of electrical/mechanical systems, • Knowledge of modern manufacturing techniques, • Experience supervising teams or contractors Safety & Compliance The successful candidate will be expected to: • Promote positive behavioural safety culture, • Maintain safe working practices at all times, • Support continual improvement initiatives, • Adhere to all regulatory and operational procedures

Salary - £33,284 - £35,322 Permanent We reserve the right to close this advert early if we find the right candidate, so we encourage you to apply early. An exciting opportunity has arisen for an experienced Mechanical / Electro-Mechanical Workshop Technician to join our highly collaborative, research-focused engineering team based at our Head Office in Wallingford. As part of the wider Water and Climate Science team, you will play a key role in developing,maintainingand supporting the facilities and equipment that underpin our science. As a technical specialist, you will become part of a small, hands-on workshop team, developing leading-edge sensor systems, environmental monitoring networks, surveyequipmentand bespoke experimental apparatus to support a wide range of researchobjectives. Working across the full engineering lifecycle, you will interpret technical drawings, produce precision-machined components, and build fully tested electro-mechanical assemblies. Using conventional and CNC machining, welding, and fabrication techniques, you will translate complex designs into robust, field-ready solutions. You will work flexibly across disciplines, contributing to electro-mechanical construction, wiring, installation, servicing, and maintenance of equipment. This will include supporting deployments to remote field sites, where reliability, adaptability and problem-solving are essential. Through this work, you will contribute to nationally significant initiatives such as: UKCEH AMI,COSMOS-UK , DELTA,Floods and Droughts Research Infrastructure (FDRI)andAgZero -helping us to deliver the data, insight and innovation needed to protect communities, informpolicyand safeguard the environment. Your main responsibilities will include: Working closely with scientists and researchers to design and build research-grade instruments and bespoke experimental systems Producing machined parts and fully tested electro-mechanical assemblies from technical drawings Operating conventionalmanual and CNClathes, milling machines, ,welding equipmentand otherworkshop machinery Working flexibly across engineering disciplines, including electro-mechanical construction, wiring, installation,servicingand maintenance of equipment, both in the workshop and at remote field sites Supporting procurement activities andmaintainingaccurateworkshop records and documentation This role offers exceptional variety and hands-on experience in a fast-paced environment where no two days are the same. From workshop-based fabrication and prototyping to field support and technical problem-solving, your work will directly enable high-quality environmental research. You will join a supportive and passionate team where your practical skills, attention to detail and proactive approach will be valued, and where you can make a meaningful contribution to delivering safe,efficientand effective operations. We are looking for someone who can work both independently and collaboratively, applying sound judgement and knowing when to seek guidance. You will bring a proactive, solutions-focused mindset, using initiative and creativity to resolve technical challenges andidentifyimprovements. Well organised and adaptable, you will manage your time effectively while continuing to build your skills across a diverse range of activities. You will be a clear communicator who can build strong relationships with colleagues and contribute positively to team culture, while also supporting the wider impact and visibility of UKCEHs work. For the role of Engineering Workshop Technician,werelooking for someone who: Holds a relevant technical qualification (BTEC Level 37) or brings equivalent experience Has a strong understanding of materials, mechanical engineering principles, and engineering tolerances,limitsand fits, with the ability to apply this knowledge in a practical workshop environment Brings hands-on experience working in a machine shop, ideally supported by a modern or time-served apprenticeship Is excited by the integration of mechanics and electronics, with an interest in mechatronics and emerging engineering technologies Has experience building and fault-finding electro-mechanical assemblies, such as sensor wiring and circuit diagnostics Takes pride in precisionand continuous improvement, with a solutions-focused mindset Works collaboratively, sharing knowledge and contributing to a positive, hands-on engineering culture Is adaptable and comfortable working on a range of projects, using initiative to solve problems Is well organised,proactiveand able to manage time effectively across varied tasks Demonstrates a solid understanding of workshop health and safety practices Holds a full UK manual driving licence, and iscomfortableto work outdoors and travel to field sites across the UK, including occasional overnight stays, Is comfortable moving and handling heavy or awkward equipment between vehicles and sites (reasonable adjustments available where needed) DesirableKnowledge &Skills: A good understanding of applied engineering principles,materialsand manufacturing techniques Experience of CNC machining with a passion for precision engineering An interest in sensors, instrumentation,electronicsor IoT technologies Experience using 3D printing for prototyping Awareness of quality systems such as ISO9001 Experience with Raspberry Pi and/or Arduino If you are experienced at producing bespoke, scientific research field and lab equipment, we would like to hear from you! Working for UKCEH is rewarding Youllbe joining a leading independent, not-for-profit research institutethatscommitted to recruiting talented people like you, progressing your career and giving you the support you need to thrive at UKCEH. Our science makes a real difference, enabling people and the environment to prosper, and enriching society. We are the custodians of a wealth of environmental data, collected by UKCEH and its predecessors over the course of more than 60 years. We appreciate the continuous dedication and contributions of our staff, which is why we provide a comprehensive benefits package that includes financial incentives and wellbeing-orientedperks, such as: 27 days annual leave (rising to 29 days after 5 years service) plus 3 days for Christmas closure 10% employer pension contribution Flexible and hybrid working arrangements (role dependant) Peer reward and recognition scheme Dental insurance, gym/fitness discounts, retail discount portal Enhanced maternity and paternity leave 24-hour, 365-day support with physical, mental, social, health or financial issues and much more... Our Commitment to Inclusion At UKCEH, we are committed to creating an inclusive andequitableworkplace where everyonehas the opportunity tothrive. We welcome applications from people of all backgrounds, identities, abilities, and circumstances. As a Disability Confident employer, we actively encourage applications from neurodivergent candidates and people with disabilities, andwerehappy to provide adjustments or support at any stage of the recruitment process - just let us know. Ifyoureexcited about this role but your experiencedoesntalign perfectly with every requirement,wedlove to hear from you anyway. You may be just the right fit for this role or another within our wider team. Please note: Unfortunately, we are unable to offer visa sponsorship for thisroleand this does not qualify for endorsement to support a Global Talent Visa application. If you are considering pursuing self-sponsorship, pleaseindicatethis in your application so we can take it into account during the recruitment process. TPBN1_UKTJ

Job Title: EC&I Engineer Job Type: Permanent Start Date: ASAP Salary Range: Competitive Salary (Dependent on Experience) Benefits Package: Hybrid Working, Flexi-Time, Annual Bonus, Competitive Benefits Package Location: Abingdon Full Site Based/Hybrid/Remote Working: Hybrid Working Hours of Work: Full-Time Role Information An excellent opportunity has become available for an EC&I Engineer to join a growing engineering team delivering projects within highly regulated industries. This role offers the chance to work across the full project lifecycle, from initial concept and design through to manufacture, installation, and commissioning. Working alongside multidisciplinary teams, you will be responsible for producing high-quality Electrical, Control and Instrumentation (EC&I) designs while ensuring compliance with project requirements, industry standards, and regulatory expectations. This position is ideal for an engineer looking to further develop their technical expertise within complex and challenging project environments. Key Responsibilities Deliver EC&I design solutions throughout the full project lifecycle, from concept design through to manufacture and commissioning. Produce EC&I design documentation, calculations, specifications, and drawings in accordance with project standards and procedures. Coordinate, plan, and deliver engineering design activities to meet project schedules and requirements. Support the development of innovative and practical engineering solutions within multidisciplinary project teams. Ensure all designs comply with relevant industry standards, regulations, and quality requirements. Collaborate effectively with other engineering disciplines to achieve integrated project delivery. Contribute to technical reviews, design assurance activities, and project meetings. Support continuous improvement initiatives and the implementation of best engineering practices. Qualifications/Experience Required BEng (Hons) Degree or equivalent qualification in Electrical Engineering, Control Engineering, or a related engineering discipline. Previous experience delivering EC&I engineering designs within industrial or highly regulated environments. Experience working on Nuclear sites or within other highly regulated industries is desirable. Familiarity with AMTECH ProDesign or similar cable calculation software. Working knowledge of AutoCAD design software. Experience working on BIM-enabled projects is desirable. Ability to work effectively within multidisciplinary engineering teams. Strong communication, organisational, and problem-solving skills. UK National Security Vetting Status Ability to gain SC Clearance is required for this role. Interested in this position? Please click "Apply Now". We try to respond to all applicants; however, due to high application volumes this is not always possible. If you have not heard from us within 14 days, unfortunately your application has been unsuccessful on this occasion. Company Information This permanent vacancy is being advertised by Rullion Ltd. Since 1978, Rullion has been securing exceptional candidates for a wide range of clients, from major global organisations to innovative SMEs and start-ups. As a family-owned business, Rullion's approach is built on credibility, honesty, and long-term relationships. Rullion specialises in delivering talent consultancy solutions across multiple sectors and is committed to championing diversity, inclusion, and equal opportunities for all employees and applicants. Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants

Electrical Maintenance Engineer - FM Service Provider - Pharmaceutical - Didcot - Up to £48,200 An exciting opportunity to join an established building services company based in Didcot has arisen! CBW Staffing Solutions is currently recruiting for an Electrical Engineer to be based in a pharmaceutical environment located in Didcot, Oxford. He or she will be required to carry out planned and reactive building maintenance alongside the maintenance team on-site. This would be a great opportunity for a candidate looking to expand their knowledge and progress their career within a highly reputable FM Company. In return, the company is offering a competitive salary of up to £48,200, overtime, further training, and a route into further career progression. Hours of work Monday to Friday 8 am to 5 pm Key Duties & Responsibilities Lighting (Small installation, Fault-finding, Lamping, etc) Emergency lighting tests Control Panels Changing Ballast BMS System - Monitor (i.e. Hot & cold) Maintain and update Log books Plumbing - Unblocking toilets Pumps, motors Package Salary of £48,200 Pension Scheme 24 days annual leave (+ public holidays) Life Cover equivalent to 1timesannual salary Gym membership discounts Cycle to work scheme Broad range of learning opportunities, such as professional qualifications, collective/individual training, and personalized support programmes Requirements Electrically qualified - City & Guilds Level 2 & 3 (Required) 18th Edition (Required) AM2 (Highly Desirable) 2391 Testing & Inspection (Highly Desirable) Must be able to provide copies of your trade certificates A proven track record in commercial building maintenance Multi-skilled Good communication skills Client Facing If you are interested in this opportunity, please send your CV to Archie Reed of CBW Staffing Solutions for more information. TPBN1_UKTJ

Planet Recruitment are looking for Carpenters to join our client in Abingdon. Work available to start immediately. First fix, stair case installation & hand rails. Own tools and full PPE required. Apply online or call (phone number removed). INDCON Planet Recruitment acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Planet Recruitment is an Equal Opportunities Employer. By applying for this role your details will be submitted to Planet Recruitment. Our Candidate Privacy Information Statement explains how we will use your information. Only candidates with the relevant skills and experience will be contacted after application, if you do not hear back from us within 7 days you have unfortunately been unsuccessful in your application. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the position

Heavy Civils Operatives – Didcot – Long-Term Work Stridden Limited are recruiting for an established Civils & Groundworks Contractor who are looking for experienced Heavy Civils Operatives to join a long-term project in Didcot, Oxfordshire. Start: Beginning of September Duration: Approximately 1 year Hours: 10 hours paid per day Location: Didcot, Oxfordshire Positions Required • 1x 35T 360 Excavator Operator, • 2x Groundworker / Pipelayers, • 2x Heavy Civils Groundworkers This is a specialist heavy civils project involving cofferdam works and deep excavations of approximately 7m. Previous heavy civils, deep excavation, cofferdam, sheet piling/shoring or similar temporary works experience is essential. This is NOT standard housing or general finishing groundworks. Project Scope Operatives will be working on heavy civils works involving: Cofferdam construction / works Deep excavations of approximately 7m Sheet piling, trench sheets, shoring and temporary works Walers, struts, bracing and temporary support systems Deep drainage and pipework Dewatering, pumps and groundwater management Working alongside large plant including a 35-tonne excavator Working within exclusion zones and around heavy plant Following engineered temporary works sequences, RAMS and site procedures 35T 360 Excavator Operator Requirements The successful 360 Operator must have: Valid CPCS or NPORS 360 Excavator Above 10 Tonnes Proven experience operating large excavators within heavy civils environments Previous deep excavation / cofferdam experience – essential Experience excavating to depths of approximately 7m Experience working accurately around sheet piles, shoring and temporary works Confidence working under the direction of banksmen / slinger-signallers where required Previous lifting experience and relevant competency/tickets where required by the project Strong understanding of exclusion zones and safe working around operatives within deep excavation environments Groundworker / Pipelayer Requirements The successful Groundworker / Pipelayers must have: Valid CSCS Extensive heavy civils and pipelaying experience Deep drainage and pipe installation experience Previous experience working within deep excavations Cofferdam / sheet piling / shoring experience strongly preferred Experience working around large excavators Experience with pumps, dewatering and groundwater Ability to work safely around temporary works and support systems Confident working from drawings, levels, RAMS and instructed sequences Experience on major civils, infrastructure, utilities or similar projects Heavy Civils Groundworker Requirements The successful Groundworkers must have: Valid CSCS Demonstrable heavy civils experience Previous deep excavation experienceCofferdam / sheet piling / temporary works experience strongly preferred Experience working around shoring, walers, bracing and temporary support systems Experience working around large excavators and heavy plant Experience with drainage, pumps and dewatering Strong understanding of site safety and exclusion zonesAbility to follow RAMS and engineered temporary works sequences Please note: Housing / standard finishing groundworks experience alone will NOT be suitable for this project. We need very experienced heavy civils operatives who are confident working within this type of environment. What We Offer • Approximately 1 year's work, • 10 hours paid per day, • Long-term project with an established Civils & Groundworks Contractor, • Competitive rates, • 24/7 support from the Stridden team throughout your assignment To Apply If you are interested, please contact JK on (phone number removed) or call the Stridden Limited office. When applying, please be prepared to provide details of your previous heavy civils, cofferdam and deep excavation experience, including the depths you have previously worked at and your current tickets. Stridden Limited operates as an Employment Business for temporary workers and an Employment Agency for permanent recruitment. Equal Opportunities: Stridden Limited is committed to equality of opportunity for all applicants. We welcome applications from all suitably qualified individuals regardless of age, disability, gender reassignment, marriage or civil partnership, pregnancy or maternity, race, religion or belief, sex, or sexual orientation

So Energy is seeking a Head of Solar and EV Installation to lead end-to-end performance across Solar, Storage and EV Charger installation, encompassing installation, sales, delivery, aftercare and commercial P&L.

So Energy is seeking an Interim Head of Solar and EV Installation to lead a high‑performing team across Solar, Storage and EV charger installation.

Oversee the Solar and Storage and EV Charger installation propositions, maintaining a compelling range of hardware, installation, aftercare and finance options. The Head of Solar and EV Installation is responsible for end-to-end performance across So Energy’s Solar and Storage and EV Charger insta

AtkinsRéalis is seeking a seasoned T&I Lead to own transport and installation strategy for major offshore wind projects in the UK. You will bridge engineering, marine operations, fabrication and installation, ensuring safe, cost‑efficient execution across interfaces. The role requires strong lead

The Head of Solar and EV Installation is responsible for end-to-end performance across So Energy's Solar and Storage and EV Charger installation business lines. Oversee the Solar and Storage and EV Charger installation propositions, maintaining a compelling range of hardware, installation, aftercare

Define installation methodologies for:. Primary interface for T&I contractors, marine warranty surveyors (MWS), and installation partners. Installation engineering tools and methods.