Trabajos medical equipment en PortsmouthCrear alertas

Date Posted: 2026-06-11 Country: United Kingdom Location: Havant, Hampshire Position Role Type: Onsite Job Opportunity: Test Technician Location: Havant Company: Collins Aerospace, a Raytheon Technologies company Join a Dynamic Team and Shape the Future of Aviation Technology! Are you ready to take your career to new heights in the aerospace industry? Collins Aerospace, a leader in aviation technology, is offering an exciting opportunity for a Testing Technician to join our fast-paced and innovative team. In this role, you will play a crucial part in the production of high-end aviation seating switches and lighting products for renowned airlines such as Qantas, Etihad, Emirates, and British Airways. This is your chance to be part of a close-knit team of professionals and to be responsible for the daily testing and verification of all products through the production department at WASP. If you're passionate about working with precision, have a strong eye for detail, and want to contribute to the next generation of aviation technology, we want you on our team! Key Responsibilities: • Testing of product to predefined test procedures (ATP’s)., • Programming of PCB assemblies with software and verifying it for use., • Performing / Setting up of electrical soak testing on all products that have a requirement to do so., • Verification of brought in Programmed PCB assemblies to ensure that the pre-loaded software is at the correct revision., • Verifying test equipment and set ups prior to the release to production., • Communicate any problems or obstacles to the Testing Supervisor or the Production Manager in a timely manner. Skills and Experience: • Production Assembly Experience: Previous experience working in a production or assembly environment is essential., • Experience in production testing environment, • Independence & Teamwork: Ability to work autonomously as well as collaborate effectively with a team., • Attention to Detail: Capable of maintaining precision in a fast-paced environment while meeting deadlines., • Strong Communication Skills: Good verbal and written communication and numerical skills are essential., • The ability to read technical drawings and electrical schematics, • Strong PC skills are essential What We Offer: • Competitive rate of pay, • 25 days Annual Leave + Bank Holidays, • Fantastic Pension Scheme, • Private Medical Insurance, • Employee Assistance Programme for personal support, • Cycle to Work Scheme and other great employee discounts Why Join Collins Aerospace? At Collins Aerospace, we believe in empowering our people to make a real difference. You’ll be part of an innovative and supportive team, where your contributions are valued and your career growth is encouraged. This is the perfect opportunity to gain hands-on experience, work on cutting-edge technology, and make an impact on the future of aviation. Ready to Make a Difference? If you’re a detail-oriented professional with a passion for precision and teamwork, apply now to become part of a team that’s pushing the boundaries of aerospace technology every day. Take your career to new heights with Collins Aerospace! Apply Now! We look forward to hearing from you. RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. Privacy Policy and Terms: Click on this link to read the Policy and Terms

A leading aerospace avionics business based in Fareham is seeking a Chief Systems Engineer to provide technical leadership and act as the organisation’s Technical Leader and Certification Authority representative. This is a senior engineering leadership role within a highly regulated civil aerospace environment, responsible for ensuring the airworthiness, compliance and certification of safety-critical avionics equipment supplied to global aircraft programmes. The business operates within a regulated civil aviation framework, working directly with certification authorities such as the UK CAA, EASA and FAA, delivering safety-critical avionics equipment that must meet the highest levels of regulatory compliance and technical excellence. Chief Engineer Permanent Monday to Thursday, 8:00am – 4:30pm and Friday, 8:00am – 1:00pm Very Competitive Salary on Offer + 15% Bonus Fareham Chief Engineer Key Responsibilities • Provide technical leadership across departments, • Act as Company Design Signatory, signing off product certification and airworthiness., • Serve as the primary point of contact with the UK CAA certification manager., • Ensure engineering processes comply with relevant civil aviation regulations., • Review and approve certification artefacts, DDPs and compliance documentation., • Oversee system lifecycle planning in accordance with civil aircraft & systems development guidance, safety-critical software, airborne electronic hardware and system safety assessment methods, • Ensure compliance with UK CAA regulations, • Oversee DO-160G environmental and EMC qualification testing., • Ensure robust configuration and change control processes are maintained., • Represent engineering in discussions with customers, suppliers and regulators. Chief Engineer Essential Experience / Skills / Qualifications • Previous experience in avionics systems certification would be preferred, • Product certification & airworthiness signatory responsibility, • Configuration and change control systems, • Strong understanding of software, hardware and mechanical integration in systems., • Experience signing off design certifications and approving compliance data., • Chartered Engineer (CEng) preferred., • Able to operate autonomously while understanding commercial implications. Chief Engineer Company Benefits • Bonus - 15%, • Funded membership of a professional body, • Focused career development planning with opportunities to progress, • Pension scheme with up to 10% matching company contribution, • Income protection scheme, • Life Assurance x4 basic salary, • Share buying scheme, • 25 days holiday, plus bank holidays, with the option to buy and sell up to 5 days, • Service-related holiday (3 years = 1 day and increase up to max 5 days), • Cash Plan or Private Medical Cover, • Employee Assistance Program for Health & Wellbeing, • Free on-site car parking, • Employee Referral Scheme, • Employee Perks – offering employees discounts on a huge variety of goods and services If you would like to find out more, please click ‘apply’ or contact Rachel.l@owendaniels.co.uk for a confidential discussion.

Embedded Software Engineer Portsmouth – On Site £60,000–£70,000 I'm currently working with a leading engineering and technology organisation supporting the defence and maritime sectors, who are looking to add an Embedded Software Engineer to their growing team based in Portsmouth. The company develops advanced mission-critical systems and electronic solutions used across naval, maritime, and wider defence applications. With a strong pipeline of long-term programmes and continued investment in engineering capability, they are seeking talented engineers to contribute to the next generation of high-performance embedded systems. You'll join a multidisciplinary team of software, electronics, and systems engineers, playing a key role in the design and development of embedded software for complex defence platforms and equipment. The position is highly hands-on, with a strong focus on C/C++ development, working closely with hardware and systems teams to deliver robust, reliable, and high-integrity solutions. The role offers involvement across the full engineering lifecycle, from requirements capture and architecture through development, integration, verification, and deployment. You'll have the opportunity to influence technical decisions, contribute to product innovation, and work on projects that have real-world operational impact. This position is based in Portsmouth and requires on-site work. Due to the nature of the work, candidates must be eligible to obtain UK Security Clearance. Unfortunately, sponsorship cannot be offered. Technical Requirements • Strong experience developing embedded software and firmware using C and C++., • Experience working with real-time embedded systems and RTOS environments., • Understanding of low-level software development, memory management, timing constraints, and performance optimisation., • Experience interfacing directly with hardware and developing low-level drivers., • Knowledge of board bring-up, hardware integration, validation, and fault diagnosis., • Ability to interpret schematics and collaborate effectively with electronics engineers., • Experience with embedded testing, verification, and debugging methodologies., • Familiarity with communication protocols such as CAN, Ethernet, SPI, I2C, UART, or similar., • Experience producing technical documentation and supporting engineering reviews. Desirable Experience • Previous experience within defence, naval, aerospace, marine, or other safety-critical industries., • Knowledge of embedded Linux environments., • Python or scripting experience for automation and test development., • Exposure to systems engineering, requirements management, or integration activities., • Understanding of secure software development practices. Salary & Benefits • £60,000–£70,000 Base Salary, • Performance Bonus, • 7% Pension Contribution, • Private Medical Cover, • 24 Days Holiday + Bank Holidays, • Long-term Programme Stability, • Career Development & Training Opportunities If this sounds of interest, please apply and I can give you a call to discuss the opportunity in more detail. Tim Stock tstock@pg-rec.com 0118 228 4223 | 07980 610737

Our mission is two-fold: growing a brand that is seen as the industry’s “Confident Guide” and building a business with a balanced purpose. We want to be a “Confident Guide”, sat between the vendors, who make technology, and our clients who want to use it to help deliver the outcomes most important to them. We offer solutions, services, platforms, applications and expertise to help. We might help our clients in a simple way, such as supplying them with the ‘equipment’ they know they already need. Alternatively, they might want to partner with us and allow us to fill holes in their understanding. Or they might want us to take care of everything, helping to agree on the destination and guiding them every step of the way. From the small and simple, to the large and complex, we want a life-long partnership, a company our clients can rely on. We also want to continue to build a business that we can all be proud of, with a focus on five stakeholders: clients, people, partners, communities and shareholders. To ensure we live up to our mission and purpose we focus on five fundamental principles that have driven our award-winning success to date, namely: Caring deeply about our people Caring deeply about our clients Developing differentiated and valuable product, service and solution offerings Driving operational success through our processes, systems and methodologies and a mindset of continual improvement Continuing to grow organically and profitably At Natilik we care about everyone as an individual, as a human being, not just as an employee and try and treat people as such. An organisation that can align the performance, goals, beliefs and values of its people to the business goals, beliefs and values of the company can achieve amazing things. We want everyone to fulfil their potential. We want people to be able to grow and develop throughout their career and enjoy a wide range of opportunities. We believe that we can always learn new things, develop and grow as individuals and as teams. We support a working environment which encourages positive change and embracing new challenges. Not only does this ensure our clients receive the best delivery and service but importantly we know this is key to our people’s satisfaction at Natilik. The role Natilik is seeking a highly driven and experienced Technology Sales Specialist to sell new multi-cloud managed services into Natilik’s existing client base as part of the Client Transformation Team (CTT). The individual will be selling NetSec portfolio: Network (WAN, LAN & wLAN) Infrastructure Next‑Generation Firewalls Zero Trust Network Access SASE / SSE Platforms The CTT is a new business team that happens to sell into existing clients, as such you should be comfortable prospecting in clients without the support of the Account Manager. The successful candidate will be an expert relationship builder with a strong track record in upselling and cross-selling to established customers, particularly within mid-market and enterprise segments able to show the ability to win net new business that delivers strong ACV, high profitability and pulls through high levels of both implementation and ongoing managed services. It is expected that the successful individual will be entrepreneurial and will be instrumental of the Natilik proposition in this technology stack. Key responsibilities Drive revenue growth through the sale of NetSec solutions & managed services into existing client accounts. Identify opportunities to enable the client’s usage of the solutions defined in the Role Summary Build sales campaigns into existing clients, execution of the plan, reporting on progress & outcome. These plans may also include working with key strategic vendors, leveraging their capabilities & relationships. Work closely with account management teams to develop account plans and strategies for growth. Build trusted advisor relationships with key client stakeholders (CIOs, Heads of IT etc.) Collaborate with internal technical pre-sales and delivery teams to develop and propose tailored solutions. Educate & evangelise with clients on the benefits of evolving their NetSec environments and adopting managed services. Maintain detailed and accurate sales forecasts, pipeline, and activity records using CRM tools (SalesForce). Stay current with multi-cloud technology trends, consumption models, and vendor roadmaps to inform client conversations. Build & develop relationships with key strategic partners including but not limited to Cisco & Palo Alto, existing relationships within these organisations with relevant stakeholders is an advantage. Required experience & skills Minimum 5 years’ direct experience selling relevant solutions and services directly to end-users ideally in a new business or business development role, particular weight will be given to any candidate with a strong track record in the sale of managed services. Demonstrable track record of revenue growth and overachievement through cross selling within a customer base. In-depth understanding of the NetSec landscape. Experience navigating and influencing complex stakeholder groups within client organisations. Excellent communication, relationship-building, and commercial negotiation skills. Familiarity with account planning and customer success strategies. Ability to operate within a MEDDICC aligned sales team. A proven demonstrable track record in the running of the entire sales process from opportunity identification, through qualification, into the deal cycle and finally execution of contracts. Desirable qualifications Vendor certifications from Cisco or Palo Alto Experience working with or for managed service providers (MSPs). Benefits Natilik offers a series of benefits and perks designed to support your personal and professional growth, while fostering a thriving and rewarding work environment. We recognise the importance of contributing to our people's well-being, job satisfaction, and work-life balance and remain committed to doing so. This is why we offer: 25 days annual leave (+ bank holidays) rising with tenure Quarterly Awards and Bonuses Flexible Working Policy Competitive pension scheme Access to Financial Wellness support Industry-leading home working and mobility technology Private Medical Insurance Company shares (available after One year tenure) Medicash (Cashback Scheme) Retail discounts via Medicash Access to EAP scheme for you and your household Vehicle lease salary sacrifice scheme (available after One year tenure) Cycle to Work Scheme Annual paid volunteering day Enhanced parental leave Access to funding for additional qualifications and courses Access to paid study leave Natilik Diversity & Inclusion At Natilik we know it's crucial that our people reflect the diversity of our clients around the world. And we know that having people from all walks of life makes us a more creative and innovative company. That variety of experience, culture and background allows our teams to be better. We make sure we do whatever we can to support our people too: making them feel valued and included and unlocking their potential is essential. We're incredibly proud of our diversity. Your application has been successfully submitted! _

At Docker, we make app development easier so developers can focus on what matters. Our remote-first team spans the globe, united by a passion for innovation and great developer experiences. With over 20 million monthly users and 20 billion image pulls, Docker is the #1 tool for building, sharing, and running apps—trusted by startups and Fortune 100s alike. We’re growing fast and just getting started. Come join us for a whale of a ride! French fluency is required We are seeking a highly consultative, commercially minded Senior Solutions Engineer to support our most strategic accounts. This role is a critical technical seller position, owning pre-sales technical strategy, shaping customer requirements early, and influencing outcomes in complex, competitive sales cycles. You will act as a trusted technical advisor and champion owner, partnering closely with Account Executives, Post Sales, and Product teams to drive measurable business and technical value through Technical Selling & Deal Shaping, Technical Champion Ownership & Thought Leadership, Customer & Internal Advocacy and Competitive & Strategic Selling This role reports to the Director of Solutions Engineering and operates at the intersection of technical depth, business acumen, and competitive selling discipline. Technical Selling & Deal Shaping: Lead technical discovery to deeply understand customer business objectives, constraints, success criteria, and buying drivers. Shape technical requirements early in the sales cycle to align customer outcomes with Docker’s differentiated value. Design, position, and execute structured PoCs and PoVs, including defining success criteria, evaluation plans, and exit strategies. Influence customer decision-making through workshops, whiteboarding sessions, and technical executive briefings. Translate complex technical capabilities into clear business value narratives. Technical Champion Ownership & Thought Leadership: Build, own, and expand relationships with customer technical champions and influencers. Establish credibility as a trusted advisor through technical thought leadership, architectural guidance, and industry best practices. Leverage champion relationships to influence broader buying groups, shape requirements, and uncover cross-sell and expansion opportunities. Maintain engagement beyond initial sale ensuring outcomes are realized and leveraging insights to support future sales motions. Customer & Internal Advocacy: Advocate for customer needs with Product and Engineering, providing clear, actionable feedback informed by field experience. Coordinate with Post Sales and Support resources to ensure continuity across the customer lifecycle. Develop reusable technical assets (workshops, demos, reference architectures, enablement content) to scale impact across accounts. Competitive & Strategic Selling: Actively support competitive sales motions by identifying differentiation and influencing evaluation criteria throughout the cycle. Partner with Sales to develop technical win strategies for strategic and competitive accounts. Proven experience as a Solutions Engineer, Sales Engineer, or Solution Architect in complex enterprise sales. Strong experience running competitive PoCs/PoVs with clearly defined success and exit criteria. Ability to engage credibly with senior technical and business stakeholders. Solid understanding of cloud platforms (AWS, Azure, GCP), containers, DevOps, and modern application architectures. Experience with Docker, container ecosystems, or adjacent technologies strongly preferred. Development, Agentic AI dev, Software Development Lifecycle and/or Software Supply Chain Experience experience strongly preferred. Excellent communication, influence, and stakeholder management skills. Willingness to travel to customer sites as required. Fluency in French and English You will be welcomed with a first-in-class onboarding experience that includes equipment setup, a sweet swag package, and a collaborative training program You will learn how to navigate through award-winning sales tools such as; Salesforce, Outreach, SalesForce, Looker, and Docker. Actively engage with senior stakeholders, and manage relationships with clients You will work closely with your peers and partner with CSMs to develop strategies to advocate for our customers. At the end of your first month, you will have a proficient grasp of the tools and activities necessary to be successful in your role. You will be laser-focused on supporting the CS Team during your second month. You will have connected with all of your Team members. You will gain in-depth knowledge of Docker’s products and how they impact our customers. You will have an advanced understanding of tools, activities, and best practices to be successful in your role. In month three, you will be confident in your craft and ready to immerse yourself in our customer’s business needs fully. You will continue efforts to improve messaging, processes, and activities. Educate our clients about our product roadmap and undertake product training for users You will be ready to operate independently at full speed. Docker does not offer visa sponsorship for this role. We use Covey as part of our hiring and / or promotional process for jobs in NYC and certain features may qualify it as an AEDT. As part of the evaluation process we provide Covey with job requirements and candidate submitted applications. We began using _ on April 13, 2024. Please see the independent bias audit report covering our use of Covey _. Perks Freedom & flexibility; fit your work around your life Designated quarterly Whaleness Days plus end of year Whaleness break Home office setup; we want you comfortable while you work 16 weeks of paid Parental leave Technology stipend equivalent to $100 net/month PTO plan that encourages you to take time to do the things you enjoy Training stipend for conferences, courses and classes Equity; we are a growing start-up and want all employees to have a share in the success of the company Docker Swag Medical benefits, retirement and holidays vary by country Remote-first culture, with offices in Seattle and Paris Docker embraces diversity and equal opportunity. We are committed to building a team that represents a variety of backgrounds, perspectives, and skills. The more inclusive we are, the better our company will be. #LI-REMOTE

Hi, we’re Penfold 👋 Penfold is building the pension of the future. We’re dragging the multi-trillion-pound pension industry out of the dark ages with its outdated products and poor service. Think about how challenger banks have changed banking. We’re demystifying pensions to make them universally accessible, engaging, and easy so we can help everyone save enough for later life. We’re growing a team of 60+ builders across London and Tallinn, backed by some of the world’s leading fintech investors. We’ve raised over £20 million, manage more than £800m in pensions for over 100,000 savers and thousands of employers. We’re on track for profitability next year and growing really quickly, named recently as the only pure-play pension company in Sifted’s 100 fastest growing startups in the UK&I. 🤑 Competitive salary - ranging from £70k-80k. 💸 10% Pension contribution (all from Penfold) - you don't need to match this, and it is on top of your salary. 📈 Meaningful share options - you’ll own a part of Penfold and share in our success! 🏝️ Unlimited holidays - we’re interested in outcomes, not how many holidays you go on! 🏥 Medical insurance - through Vitality you get access to Private GPs, Physio, Counselling services and great discounts and offers (think 50% off Virgin Active or PureGym memberships, free Apple Watches). 🧑‍💻 Hybrid working - we like people to come into our office at least a couple of days a week to collaborate (so it would be great if you lived within reach of London), but we trust you to get your work done in whatever environment suits you. We have quarterly in-person team socials to ensure we all stay connected and regular optional meetups too! 🏢 Great community office - a wonderful private office near Borough Underground station with free gym and other great benefits. Free snacks, coffee, drinks and company lunch once a week. 🖥️ Best-in-class equipment - MacBook and any WFH equipment you need. 🚴 Cycle to work scheme plus a host of other benefits - see here: https://getpenfold.com/careers About the role We’re looking for a Product Manager to own key customer-facing outcomes, starting with pension transfers, contributions and other critical flows that drive LTV and help our customers save with confidence. You’ll be responsible for the full product lifecycle in your area, from identifying and framing problems, to shaping the roadmap, leading discovery, managing delivery and iterating post-launch to deliver outcomes for our customers and our business. You'll have strong support from the Head of Product and peers across the team, and you’ll play a vital role in helping us scale both our product and how we work as we grow. You will: • Own critical customer-facing outcomes, flows and be responsible for key results, • Set the pace; we’re a start-up and have a serious bias for action, • Lead continuous discovery, • Define success metrics, ask sharp data questions and analyse results to surface opportunities, • Run generative research to deeply understand our customers and inform product direction, • Frame and map opportunities to guide prioritisation and trade-offs, • Break down initiatives into smaller bets to accelerate learning and time-to-value, • Collaborate closely with Engineering, Design, Ops, Sales and other teams to ensure smooth delivery and alignment, • Be accountable for predictable delivery and ongoing iteration in your area About you You will have: • Demonstrable experience discovering and delivering successful products with measurable impact, • Confidence in using data independently to inform a broad range of decisions, • A deeply customer centric mindset, • Experience working in highly autonomous, accountable, cross-functional teams, • Experience working with a continuous product discovery approach and outcome-focused development, • A strong ability to use feedback loops and success metrics to guide learning and iteration, • Clear, structured written and verbal communication with technical and non-technical audiences, • A genuine interest in helping people save more for later life Ideally you have previous experience… • Working on B2C or B2B2C apps with tens or hundreds of thousands of users, • In fintech or a highly regulated industry, • Navigating complex operational workflows, • In start-ups or scale-ups, especially during periods of fast growth You do not need to meet all of the above criteria in order to apply! If you’ve read this far and are excited about the opportunity, but are missing some of the experiences we’ve listed, we strongly encourage you to apply regardless. • We’ll have a 45 minute introductory call to properly introduce you to Penfold, find out more about your experience so far and career aspirations, and make sure you get a chance to ask any questions you might have, • The next stage would be a 90 minute exercise/task which is done over a video call at a time that suits you, • Finally, we’ll organise some sessions with some team members from inside and outside Product & Engineering for a few conversations about how we work together and what to expect day-to-day. You’ll also have the opportunity to ask them questions directly For more info, feel free to reach out to George Cleal, our Head of Product. We are 100% committed to building a diverse and representative team. Whatever your race, religion, colour, national origin, gender, sexual orientation, age, marital status, or disability - we want to hear from you. If you have questions about the role, the company, or the interview process, please let us know and we’ll be happy to answer.

Crew Relation Specialist - is responsible for providing administrative support to the HR division for crew related issues. Manages the berthing and par level processes for all crew members and provides reports for each voyage. Coordinates the crew emergency plan numbers. Assists the Crew Administrator with Crew Immigration/Customs with specific duties during the sign-on & sign-off process. This includes assigning name badges and cabin keys at sign-on and collecting these at sign-off. Responsibilities include coordinating repatriation for all crew by providing re-employment letters. Processes all employee cruise requests with shoreside. Organizes crew activities/events and manages crew welfare. Performs HR administrative duties as directed by the HR Manager. • Travel around the World, • Experience working with more than 72 nationalities, • Permanent job with contract 6-8 months onboard followed by 60 days of vacation, • Save Money as you do not pay for food and accommodation on board, • Competitive salary (find out when apply), • Visa fee will be reimbursed on board, • Professional growth, • Medical insurance provided during contract, • Work in Royal Caribbean Cruises Ltd. named one of the Top-Rated Workplaces RESPONSABILITIES • This consists of physical and verbal interactions with guests or fellow shipboard employees and/or in the presence of guest contact and crew areas. • Provides information and services to shipboard employees with regards to orientating, assigning and retrieving berthing, equipment, and written literature. Issues cabins and bulk assignments to all Officers, Staff and Crew. Records all cabin and crew changes and prepares berthing report for each voyage. Assigns crew emergency numbers, name badges and cabin keys. Collects all items when shipboard employees sign-off. • Assists with the crew sign-on and sign-off process, as directed by the Crew Admin. Manager, reviewing immigration documentation such as passports, visas, Alien Resident Cards (ARC), Letters of Re-Employment, etc. to determine validity of documents. Refers unusual documentation to the Crew Admin. Manager and HR Manager., • Ensure accuracy of employee records, • Conducts/coordinates weekly cabin inspections and reports discrepancies., • With the full support of the HR team, helps organize and delivers activities for the crew that foster good shipboard employee morale. Assists in managing the Crew Welfare Fund., • Minimum 1 year prior administrative experience within a hospitality industry, • Working knowledge of onboard computer systems, internet access, and the ability to navigate within variety software packages such as MS Office, • Fluent in conversational & written English, hospitable with a positive attitude, • Minimum 21 years old, • Minimum 1 year prior administrative experience within a hospitality industry, • Completion of high school or basic education equivalency preferred., • Working knowledge of onboard computer systems, internet access, and the ability to navigate within variety software packages such as MS Office, • Ability to work positively and cooperatively in a diverse team environment and to interact with a wide variety of ethnic diversity., • Excellent interpersonal and people skills NOTE: Nationalities that we can process: 🇱🇹 🇱🇻 🇪🇪 🇵🇱 🇺🇦 🇪🇺 For 🇲🇩 🇬🇪 🇧🇾 🇷🇺 additional security / background check may be required Last updated: March 15, 2024 You can submit your Resume here by pushing APPLY TO POSITION button If you are not sure what position to apply for, you may instead submit a general application here and we will advise you: _

Founded in 2015 with the mission to protect the open economy, OpenZeppelin is the world leader in securing blockchain applications and smart contracts. Our Open-Source Contract Libraries are a public good that have facilitated the transfer of over $35 trillion and are considered the industry standard for smart contract development. Our professional expertise integrates seamlessly into clients’ development lifecycles, enabling teams to plan, code, audit, deploy, and operate projects more quickly and securely. Please note: Always refer to OpenZeppelin's official job page for the most accurate information about our open roles, as we have seen multiple third party job sites posting inaccurate information. The Financial Institutions team at OpenZeppelin drives the adoption of security solutions for financial institutions moving onchain. As tokenization and digital assets gain momentum, we partner with the world's largest institutions to deliver industry-leading security audits and battle-tested open-source smart contract libraries. Our mission is to generate revenue through best-in-class security services while building innovative solutions for a rapidly evolving market. We operate cross-functionally with Pre-Sales, Partnerships, Ecosystem, Project Delivery, and Legal to ensure a seamless go-to-market strategy and flawless execution. As our first dedicated Institutional Sales Lead for the European market, you will be instrumental in executing our go-to-market strategy - from outbound prospecting to deal closure - while laying the foundation for a scalable sales organization. Your responsibilities will include: • Managing the full sales cycle with financial institutions, from lead generation and prospecting through to contract negotiation and deal closure., • Leading discovery conversations with key stakeholders - including C-suite executives and internal Solution Architects - to surface client needs and compellingly articulate OpenZeppelin's value proposition., • Driving regional revenue growth in the region by consistently meeting and exceeding your sales targets., • Identifying strategic partnerships in your region to generate qualified leads and accelerate deal velocity, then handing off to our Partnerships team at the right moment., • Staying ahead of rapidly evolving market trends and competitive dynamics to proactively shape outreach and positioning., • Representing OpenZeppelin at key European and global industry events, conferences, and trade shows to build relationships and uncover new business opportunities., • Maintaining accurate pipeline forecasts, tracking performance metrics, and continuously refining your sales approach using data-driven insights., • 6+ years of experience in enterprise or institutional sales, with a proven track record of consistently exceeding revenue targets., • Deep understanding of Web3, digital assets, and the tokenization landscape; hands-on experience in the crypto industry is a strong plus., • Based in the CEST timezone - preference for candidates located in London or Switzerland., • Exceptional communication, negotiation, and relationship-building skills, with the gravitas to engage C-suite and senior decision-makers., • A well-established network within the financial services or blockchain ecosystem, including founders, executives, and industry leaders., • A data-driven mindset combined with the creativity and adaptability to thrive in a fast-moving, high-ambiguity environment., • Demonstrated success working in a remote-first, globally distributed team., • Bachelor’s degree in business, finance, or a related field., • An existing network spanning TradFi asset managers, hedge funds, market makers, custodians, and financial intermediaries., • Experience rapidly generating and testing new sales motions ("fail fast") and distilling learnings for both clients and internal stakeholders., • Strong acumen in GTM engineering or AI-powered sales tooling., • Technical background or familiarity with smart contract development, particularly in Solidity., • Fluency in a second European language (French, German is particularly valued). This interview process consists of the following stages: • Recruiter Interview (30-45 minutes), • Hiring Manager Interview (45 minutes), • Team Interview (30 minutes), • Leadership Interview (30 minutes), • Paid work trial (lasting up to 10 days), • Reference checks Please let us know if you require any accommodations for the interview process, and we'll do our best to provide assistance. • Company in-person gatherings in different locations around the world 😎, • Fully remote work 🌎, • Flexible time off 🏝, • Paid parental leave 💙, • One time work-from-home equipment stipend of up to $500 USD 🪑, • Medical insurance coverage 🏥, • Learning & Development opportunities 🧠, • Work with a global team in a fast-growing industry 🚀 At OpenZeppelin, we are an equal opportunity employer and we value different perspectives. We are committed to building a diverse workforce. This includes but is not limited to gender, race, sexual orientation, religion, national origin and other characteristics that make each one of us unique. In this uniqueness, we find the most value. Come join us!

Title: Quality Control Manager / QC Manager Location: Hampshire Salary: Competitive dependant on experience Term: Permanent Benefits: enhanced training and development opportunities, private medical insurance, bonus, SRG is working with a leading personal care and skincare manufacturer in Hampshire who are looking for a QC Lab Manager to join the team. This is a great opportunity to lead the QC lab, manage a team and be responsible for maintaining quality standards across site. It would suit someone with 3+ years’ experience in a QC supervisory or management role, ideally within personal care, cosmetics, skincare, pharmaceuticals or another regulated manufacturing environment. Working Hours: Monday to Friday 8am – 4:30pm total of 37.5 hours a week Role / Description • Lead day-to-day QC laboratory activities, ensuring accurate and timely testing of materials and finished products, • Provide technical guidance and troubleshooting support across analytical methods and laboratory equipment, • Oversee investigations into non-conforming results, driving root cause analysis and corrective actions, • Review and approve analytical data, ensuring compliance with quality standards and audit readiness, • Manage laboratory systems, documentation, and equipment qualification in line with regulatory expectations, • Collaborate cross-functionally to resolve quality issues and improve overall lab performance, • Develop and support laboratory staff, driving performance, training and continuous improvement Requirements • Strong experience within a QC and have a minimum of 3 years of experience in a leadership role (supervisory or management), • Recent industrial experience working to GMP, ISO, GDP standards and working within a highly regulated environment, • Confident communicator with strong problem-solving skills and the ability to lead and influence others, • Full right to work in the UK, there is no sponsorship available for this role SRG is the UK’s number one recruitment company specialising in the scientific, engineering, clinical, pharmaceutical, food/FMCG, energy & renewables, biotech, chemical and medical device sectors. As scientists ourselves, our specialist sector knowledge and our passion are second to none. It’s this combination that makes us different. We’re committed to providing outstanding temporary, contract and permanent career opportunities of all levels for our candidates and a comprehensive range of expert strategic recruitment services for our clients. If you would like to apply for this position, please use the link provided. Alternatively, please email a copy of your CV For more information regarding this position or any others, please call Rhi on 0161 667 1812. If you have a scientific background and this position is not relevant / suitable for you, please feel free to get in touch or visit www.srgtalent.co.uk to view our other vacancies. Keywords: qc, quality control, qc manager, quality control manager, head of qc, head of quality, quality assurance, qa, qa manager, FMCG, NPD, new product development, wet chemistry, laboratory, lab, technical, project management, personal care, cosmetics, skincare, research and development, cosmetic science, SPF, suncare, research and development, FMCG, R&D, Cosmetic Science, cosmeceutical, hair care, lab technician, cosmetic chemist, new product innovation, NPI, innovation

Role: PLC Software Engineer Location: East/Central England (remote role with travel across the UK & Northern Ireland) Salary: Up to £55,000 depending on experience We are recruiting on behalf of a well-established MEICA specialist operating across the Water, Wastewater, and Power sectors. Since its foundation in 1999, this organisation has delivered turnkey engineering services from initial concept through to design, construction, installation, and maintenance. They are committed to becoming a world leader in water and power solutions, with a strong focus on quality and customer satisfaction. About the Role: This is a fantastic opportunity for a PLC Software Engineer to join a forward-thinking company where you'll be working on high-impact infrastructure and utility projects. You'll be instrumental in programming, commissioning, and delivering automation systems critical to environmental and energy networks. Key Responsibilities: • Program and develop PLC software (experience with Schneider, Allen Bradley, Mitsubishi, Siemens, or Omron desirable), • Design and implement logic/flow diagrams for system automation, • Troubleshoot, test and commission PLC systems both off-site and on-site, • Support the configuration and commissioning of automation/control devices, • Modify existing programs per client or site specifications, • Provide technical support to field teams and assist in improving automation processes, • Participate in the on-site commissioning of electrical and electronic systems What We’re Looking For: • Qualified in Electrical/Electronic Engineering, • Minimum 3 years’ experience in PLC programming, • Full UK driving licence, • Experience in the water or wastewater sector, • Familiarity with electrical control panels and process automation, • Experience with automation & process control equipment Benefits: • A company van & fuel card will be provided, • Laptop & mobile phone will be provided, • Private medical insurance, • Death in service x3 times annual salary, • Corporate events Apply now to be considered for this exciting role and help shape the future of automation- one project at a time!

Rocket Science Group is a co-development game studio specialising in multiplayer, platform services, publishing technology, and live operations for PC, console, and mobile titles. We have teams in Europe and North America and work in partnership with the game industry’s top creators. About the Role: We’re looking for a Developer Support Technician to join our team as we build out a new team to support a new product offering. This is a critical role responsible for the day-to-day operations in our Mission Control Centre (MCC), the nerve centre for our Live Operations function. You will join a new team executing our 24/7/365 Monitoring and Incident Management processes and keeping our customer’s games operating flawlessly. We have recently taken responsibility for Unity’s Multiplay game server hosting solution. Initially, you’ll be focused on supporting the migration of existing customers and ensuring their technical solution is performing flawlessly. This is a Remote role based in South Wales. Please note we have an office in Cardiff City Centre so you will need to be flexible to come in from time to time. The role will consist of 4 x 10 hour night shifts with 3 days off per week including some weekend working, Salary: £30,000 - £35,000 + (£3,750 shift allowance) dependant on experience and skills. What You’ll Do: Operations: Daily operations of the MCC, including monitoring live services, managing incident response, and ensuring optimal performance across all platforms. Technical Support: Be responsible for customer requests and tickets within committed SLA response times, whilst delivering outstanding customer experience with clear and effective interpersonal communication. Develop Processes: Create, refine, and follow policies and procedures for incident management, escalation, and communication to minimise downtime and impact on the player experience. Diagnose and troubleshoot issues: Utilise monitoring tools to identify root causes efficiently, perform basic debugging to restore backend services quickly during incidents. Player Operations: Operating our customer’s games on their behalf. This could include chat moderation, restoring in-game items, appeals against player suspensions, player support and more. What We Value: Customer First Approach: You will have experience in a customer facing role and put customer experience first in all interactions. Problem-Solving: The ability to think clearly and make decisive actions in high-stress situations, with a strong analytical mindset. Proactive Mindset: A commitment to proactive monitoring and resolution of issues before they become more serious. Technical Proficiency: Demonstrated capability in essential technical tasks, including (but not limited to) connecting to and diagnosing server faults, performing basic network debugging, and familiarity with scripting for automation and troubleshooting. You May Also Have: Experience in video game live operations, with backend systems and game server management. Experience working in a NOC or technical support environment, with an understanding of incident response protocols and service level agreements (SLAs) Familiarity with data and analytics platforms used for reporting on operational performance. Familiarity with help desk/ticketing software (e.g., Zendesk, Pylon, Jira). Experience writing technical documentation and runbooks. What We Can Offer: Remote Working: This role can be based fully from home and we will provide all equipment you need. Competitive Salary and Benefits Package: Your health and wellbeing is important to us, so we offer a variety of benefits including: Private Pension via Salary Sacrifice Optional Private Medical, Dental, and Vision Coverage Enhanced Annual Leave Annual Research Credit: We always encourage personal growth, so we provide all of our team members with an annual credit to further enhance your skills! Professional Development: We offer biannual reviews, as well as opportunities to collaborate across disciplines, internal tech talks, and the chance to learn from specialists with backgrounds from across the games and software development industries. Family Friendly: We understand the importance of family, which is why we offer 6 weeks full of Maternity, Paternity, and Adoption Leave to support you during this exciting time! A Friendly Note from the Recruitment Team: Let us do the work for you: Even if your profile isn't an exact match for all of the qualifications listed above, we still want you to apply. Our team members come from a variety of different industries, not all of which are immediately relevant to game or software development, and we welcome all candidates of similarly varied backgrounds, communities, and identities. Rocket Science is an equal opportunity employer and is committed to providing a worry-free workplace void of discrimination or harassment. Rocket Scientists are expected to foster and champion an environment in which everyone has the opportunity to feel included and is afforded the respect and dignity they deserve. Rocket Science does not accept unsolicited résumés from recruiters, employment agencies, or staffing firms. #li-remote

About the Position The Associate Principal is a mid-level engineering role responsible for leading small- to mid-scale, multi-discipline projects with growing independence. You’ll guide projects from programming through closeout—clarifying requirements, coordinating design, documenting decisions, and ensuring deliverables meet TEECOM’s standards for quality and constructability. You’ll apply strong engineering judgment, maintain alignment with scope, schedule, and budget, and surface risks early to keep projects on track. You’ll strengthen TEECOM’s system by contributing to GitHub, documenting client-specific nuances, and improving standards, tools, and workflows. Externally, you’ll cultivate strong client relationships—building trust through clear communication, reliable follow-through, and thoughtful problem-solving. You’ll also begin developing credibility through thought-leadership activities by supporting pursuits, contributing technical narratives, participating in interviews, and helping develop content such as blogs, white papers, or presentations. Internally, you’ll mentor Designers and engineers through hands-on guidance, reviews, and feedback that strengthen discipline capability and reinforce TEECOM’s standards. While not a people manager, you’ll play a key role in developing TEECOM’s talent and reinforcing disciplined engineering practices. This position reflects strong engineering capability, reliable project leadership, and growing influence in shaping TEECOM’s systems, documentation, and delivery. • As an Associate Principal, your impact comes not only from the quality of your own discipline work, but from how effectively you guide project teams, strengthen coordination, and support the growth of TEECOM’s engineers. You contribute in three key ways:Mentor and Support Engineers, • You strengthen project teams by guiding Designers and Associates, reinforcing disciplined design practices, clear documentation, and sound technical judgment., • You contribute to TEECOM’s talent pipeline by serving as either a Mentor or a Mentee—helping grow others while also expanding your own capability., • As a Mentor: You accelerate others’ growth by setting expectations, providing clear direction, and reinforcing disciplined, high-quality work., • As a Mentee: You advance your own development by actively seeking feedback, applying guidance, and building readiness for larger scopes and leadership responsibilities.Contribute to Training and Knowledge, • You elevate team capability by actively engaging in design reviews, debriefs, and cross-discipline discussions that improve shared understanding and decision-making., • You strengthen discipline consistency by offering insights and clarification that help teammates apply standards correctly and develop stronger engineering judgment., • You support TEECOM’s learning culture by modeling disciplined documentation, fostering collaborative problem-solving, and shaping training resources that accelerate the growth of Designers and engineers.Improve the TEECOM System, • You reinforce firmwide consistency by applying standards reliably and maintaining clear, accurate discipline documentation that others can depend on., • You strengthen workflows by identifying gaps in templates, tools, or processes and offering improvements—through constructive feedback and Pull Requests—that reduce rework and improve scalability., • You enhance project predictability by sharing lessons learned, reinforcing best practices, and helping teams stay aligned and clear in their approach., • You deliver accurate, well-coordinated discipline designs on mid- to large-size projects with increasing independence and reliable follow-through., • You apply strong judgment—identifying risks early, resolving discipline conflicts, and supporting cross-discipline coordination., • You maintain disciplined documentation across drawings, specifications, calculations, and decision logs, enabling predictable project delivery., • You improve TEECOM’s system by providing actionable feedback, proposing workflow refinements, and submitting targeted Pull Requests., • You communicate clearly with clients and design partners—documenting decisions, clarifying requirements, and keeping teams aligned., • You mentor Designers, Associates, and production by providing guidance, markups, and timely feedback that strengthens their technical capability and documentation habits., • You collaborate closely with Project Leads and Group Leads to maintain alignment on scope, sequencing, and coordination strategy., • You support pursuits by contributing scope input, fee assumptions, and participating in interviews as needed., • You actively participate in client relationship development through networking events and conferences, direct outreach to clients and partners, and sharing intel gathered through documented interactions., • You deepen your discipline expertise through mentorship (as Mentor or Mentee), preparing for broader leadership responsibilities., • You model TEECOM’s Core Values—Care, Trust, and Value—through clear communication, disciplined execution, and proactive problem-solving., • These responsibilities and expectations represent what is required to successfully perform the essential functions of this role.Annual and Quarterly, • Partner with Project Leads, Group Leads, and senior engineers to strengthen coordination strategy, discipline consistency, and delivery reliability across projects., • Participate in performance assessments and demonstrate measurable growth in engineering judgment, project leadership, and system contribution., • Lead technical design reviews that reinforce TEECOM standards, improve documentation clarity, and identify coordination risks early., • Contribute to discipline standards, workflows, and tools through targeted Pull Requests and documented lessons learned., • Strengthen team capability by mentoring Designers and engineers through clear technical guidance, markups, and feedback., • Identify recurring coordination challenges or workflow gaps and recommend improvements that enhance delivery predictability and cross-discipline alignment., • When serving as a Mentor, provide structured quarterly feedback that supports technical growth and readiness for increased project leadership.Monthly and Biweekly, • Deliver coordinated discipline designs including layouts, calculations, specifications, and supporting documentation that align with engineering intent and TEECOM standards., • Partner with Project Leads to confirm scope, sequencing, coordination strategy, and evolving client requirements., • Participate in project and discipline meetings, communicating decisions, constraints, risks, and next steps with clarity., • Review Designers’ and engineers’ work, providing guidance that strengthens technical accuracy, coordination alignment, and documentation quality., • When assigned as a Mentor, delegate meaningful scope, clarify expectations, provide structured feedback, and hold regular check ins that strengthen technical growth, documentation habits, and decision making., • Maintain clear documentation of decisions, assumptions, and client specific nuances across GitHub and project tools to support consistent delivery., • Review discipline progress against scope, schedule, and coordination milestones and surface risks early to support Project Leads in maintaining alignment., • Maintain accurate and timely time and expense entries that support delivery accountability.Weekly and Daily, • Prepare and review layouts, markups, calculations, and related deliverables, resolving discipline-specific issues with sound engineering judgment., • Participate in coordination meetings, clearly communicating impacts, decisions, and required follow-up actions., • Provide guidance to Designers and engineers by clarifying expectations, reinforcing documentation standards, and supporting informed decision-making., • Maintain clear, up-to-date documentation across Asana, GitHub, and shared project platforms to support delivery alignment., • Execute design and documentation tasks with increasing independence while maintaining alignment with TEECOM standards and project priorities., • Communicate proactively with cross-discipline partners to confirm assumptions, surface risks early, and maintain coordination clarity., • Keep project notes, markups, and documentation current as work progresses to ensure transparency and continuity.As Needed, • Support programming sessions, site walks, surveys, or construction-phase coordination, documenting findings clearly to maintain alignment with design intent., • Contribute to pursuits by developing discipline scope assumptions, OPCC inputs, and interview support as needed., • Research products, codes, and design approaches that strengthen technical solutions and coordination outcomes., • Support other teams during heavy workload periods or complex project phases to maintain firmwide delivery momentum., • When assigned as a Mentee, meet regularly with your Mentor to review feedback, discuss project decisions, and strengthen technical judgment and discipline expertise., • Supervisory: When serving as a Mentor, you provide structured coaching and quarterly performance feedback for assigned mentees. You support day-to-day discipline execution by aligning Designers, engineers, and production team members with project priorities, scope, and documentation standards, while identifying dependencies, risks, and resourcing needs that inform workload planning., • Mentorship: Provide hands-on coaching and design guidance to Designers and engineers assigned to your projects. When paired as a Mentor, you hold regular check-ins, clarify expectations, review progress, and contribute input to quarterly and annual performance assessments. You reinforce disciplined documentation, communication, and coordination practices through clear guidance and example., • Training: Support the development of training content, participate in design reviews, and help team members strengthen technical and documentation skills through practical, project-based coaching., • Education: Bachelor’s degree in Engineering (Electrical preferred) or equivalent experience., • Experience: 6+ years of experience in AEC or related professional services with demonstrated discipline-specific capability., • Preferred: Experience leading discipline portions of mid- to large-size projects, supporting coordination, and providing guidance to Designers or engineers., • Proven ability to deliver accurate, well-coordinated designs and make sound decisions within your discipline., • Strong understanding of project delivery workflows, client expectations, documentation standards, and cross-discipline coordination requirements., • Demonstrated experience contributing to documentation updates, standards refinement, or QA/QC workflows through GitHub Pull Requests or similar platforms., • Strong proficiency in Autodesk (AutoCAD, Revit), Bluebeam Studio, Microsoft 365 Suite, Google Workspace, and GitHub.Industry certifications preferred by discipline:, • RCDD (Telecom/ICT) — preferred, • PEng — plus, • PMP — plus, • These physical demands represent what is required to perform the essential functions of this job. Reasonable accommodations will be provided as needed., • Prolonged desk work using a computer, keyboard, mouse, and telephone., • Regular reading, writing, and communication in virtual and in-person settings., • Occasional travel to client sites for meetings, surveys, or inspections., • Site walks may require standing or walking for extended periods, climbing stairs, and navigating construction or utility areas., • Field activities may involve bending, kneeling, or maneuvering in confined spaces., • May occasionally lift or move equipment weighing up to 25 pounds., • These work environment characteristics represent the conditions encountered while performing essential job functions. Reasonable accommodations will be provided as needed., • Approximately 75% of work is performed in a remote or office environment using standard office equipment., • Approximately 25% occurs at client sites, including construction environments and existing facilities., • Construction sites may include exposure to elevated noise levels, dust, uneven or unfinished walking surfaces, variable lighting conditions, and active construction operations., • Utility rooms and similar spaces may have restricted access or may not fully comply with ADA accessibility standards. When access limitations exist, TEECOM will support coordinating reasonable accommodations with site-controlling contractor or alternative means to perform essential job functions., • All accidents, near misses, and unsafe conditions must be reported immediately to the site superintendent and internally to People Operations.£85,000 - £105,000 a yearThis compensation will vary depending on your role-related skills, experience, knowledge, and subject matter expertise. TEECOM is committed to making sure that we are the right fit for each applicant and that each applicant is the right fit for our team. As we get to know each other throughout the interview process, the compensation may vary within the stated range. TEECOM offers a comprehensive benefits package to support employees and their families, including medical, dental, and vision insurance for employees and their dependents, basic and voluntary life insurance, short-term and long-term disability coverage, a 401(k) plan with profit-sharing contributions, paid parental leave, lifestyle and legal benefits, pet benefits, and performance-based bonuses. Full-time exempt team members also enjoy flexible time off, and all employees receive nine scheduled paid holidays.Your level will be evaluated and determined during the interview process. NOTICE TO THIRD PARTY AGENCIES: Please note that TEECOM does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, TEECOM will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, TEECOM explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of TEECOM.We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Primer is the world's first unified payment infrastructure, founded by former leaders of Braintree and PayPal. We unify fragmented payment and finance systems into a single, intelligent platform, automating the entire payments lifecycle from acceptance and orchestration to reconciliation, FX, and financial operations. Trusted by leading merchants worldwide, we give finance, payments, and engineering teams the tools to move faster, reduce complexity, and unlock growth. Our open, modular platform connects to 150+ services across the payments ecosystem, while our expanding CFO product suite brings unified reconciliation, FX management, and financial visibility across markets and currencies. Backed by Accel, Balderton, ICONIQ, and Tencent, we're setting a new standard for how the world moves money. At Primer, Solutions Engineers are trusted technical advisors to some of the most forward-thinking companies shaping the future of commerce. We don’t just support merchants, we empower them to build smarter, faster, and with confidence on top of Primer’s unified payments infrastructure. From day one, you’ll work closely with product, engineering, and commercial teams, translating complex needs into scalable solutions, guiding technical strategy, and ensuring every integration is rock-solid. Whether you’re unblocking a proof of concept or future-proofing an architecture, your focus is on making things possible. This role is perfect for curious minds who thrive at the intersection of technology and impact. You’ll bring clarity to complexity, act as a critical voice in shaping product evolution, and make sure our merchants don’t just go live: they go further. If you’re excited by meaningful challenges, collaborative problem-solving, and the chance to drive change at a global scale, we’d love to meet you. Working closely with our growing sales team to identify merchant pain points; and consulting with those merchants on the value of Primer to address those pain points Providing technical expertise to the sales team to partner with them in business development Translating business requirements into technical solutions, and translating complex technical concepts into simple language Driving forward client engagements via discovery sessions, solution design workshops, product demos, developer Q&As, and more Collaborating with our Product team, using your market learning to identify feature enhancements, as well as new features entirely, that we can bring to market to best serve our merchants Previous experience in a merchant facing role with a complex API product, ideally in payments Confidence and ease in leading discovery sessions and working with technical counterparts at some of the largest merchants Deep interest or knowledge about tech. Being able to understand, explain, and design complex technical specifications is key. Creativity and improvisational skills. Rarely are two merchants alike, and you don’t always have days to prepare for them. Great communication & presentations skills - you can make the complicated sound simple and interact with stakeholders, technical and non-technical, alike A collaborative approach - to efficiently work with clients, partners, and internally, with Product, Engineering, and Sales Drive and motivation; we’re growing fast and we want you to grow with us! Someone who gets things done and makes an impact Experience working in a fast-paced and scaling environment You enjoy working in an office-setting, we are remote-first and always will be! You are not comfortable with shifting context and navigating ambiguity 30 minute call with a Talent Partner 45 minute interview with our Hiring Manager Challenge Stage - Contextualised to Primer! 60 minute values alignment interview _ _ We’re building a culture where people can come and do their best work and enjoy it. We want our people to be proud of the impact that they have at Primer, and of the work that they are doing. You will be working with a team of people who are mission-driven, smart, and reflective, and who are invested in building exceptional products and delivering success for our merchants (and we also know how to have fun along the way). We work remotely. We believe that building a successful, profitable company goes beyond proximity. We invest in our relationships with each other through great remote working practices and thoughtfully designed face-to-face time together. Our heads-together time comes in the form of workstations, our annual company retreat, and co-working space access worldwide. Finally, let’s go ahead and say it. The work that we do is challenging. Startups are a challenge, building category defining products is a challenge. You should be prepared for a challenge at Primer. But, there’s a big difference between a challenge and a struggle. The key difference is that the right challenge comes with the right support structures, an acceptance that not everything always goes to plan, a collaborative environment, and a great team around you. It’s never a challenge that you will face alone. 🌍 We are fully remote and globally distributed; and have been since day one 💰 Competitive share options 🌴 Uncapped holiday, with 25 days minimum to be taken 🗣️ Co-working space access 📅 Workations & Company Retreat 💻 The best equipment for your role 🏠 £500 towards your home office setup 🔎 Generous learning budget 🏥 Private Medical Insurance 📈 A broad set of additional perks and benefits (depending on location) At Primer, we’re dedicated to building a diverse, inclusive, and authentic workplace. If you’re excited about this role but your past experience doesn’t align perfectly with every qualification in the job description, we encourage you to apply. You may be the right candidate for this or other roles. Primer is committed to the equal treatment of all current and prospective employees, regardless of background or beliefs. Primer adopts a zero-tolerance approach to discrimination. We are committed to providing equal opportunities to all current and prospective employees regardless of age, disability, sex, sexual orientation, pregnancy and maternity, race or ethnicity, religion or belief, gender identity, or marriage and civil partnership.

We are Hiring! We have an exciting new opportunity at Scope for a Business Development Manager - Optics to join our team! We are looking for people who can connect their own personal vision and values into some of what we do at Scope. Our vision as a company is to constantly exceed the expectations of our healthcare partners, our patients and our people by bringing together the extraordinary. Please read below the full job description for the role and if this is something that you would be interested in, please click apply and a member of the Scope team will be in touch regarding your application. BDM - Optics This role will be responsible for increasing market awareness of Scope's products and driving new opportunities and sales in Opticians. This role will involve detailing our full Ophthalmic portfolio and focussing on the Key Accounts in this sector. The Optics BDM will take direction from management but will be able to plan and implement their own activities with limited assistance. Working closely with our external partners, to grow sales and develop the Scope brand within this sector. The role requires collaboration with colleagues in the UK Optics Division. Delivery of Business & Marketing Objectives · Responsible for the delivery of pre-set objectives on sales, activity and other metrics to grow the Scope brand and sales within the Optical market. · Effectively positions the Scope Dry Eye Product portfolio for the customers from both a clinical and commercial perspective. · Utilises marketing collateral effectively and provides feedback to the marketing team. Product Promotion & Sales · To conduct sales calls with customers in Key Optical Accounts. · To conduct sales presentations to customers in a range of formats. · To focus all activities and promotional spend on target customers. · To develop and maintain good selling skills using the company adopted model, and to use these skills to maximise usage of Scope promoted products. · To use promotional materials in an appropriate fashion to support the selling messages for Scope as set out in marketing plans. · To represent Scope in a professional manner in line with the company standards. Commercial Focus · Uses strong commercial acumen to identify and develop opportunities within Key Accounts. · Partners with customers to develop joint business plans highlighting revenue generating potential for their business. · Applies a range of influencing, persuading and negotiation techniques to secure and maintain the Account. Product & Market Knowledge · Maintain and develop strong product and therapy area knowledge for all Scope always promoted products and competitors. · Have a detailed understanding of the marketing strategy for those promoted products. · Uses company systems and processes to be as effective as possible in the role and support the broader effectiveness of Scope. Customer & Account Focus · Drives account strategy to be adopted in each account. · Have an input to Key Account identification, and to then tailor all account plans in line with the account strategy adopted for each account. · Takes personal responsibility for the development of Key Opinion Leaders (KOLs) in Optics. Business Planning & Time Management · Production of a Territory Plan on an annual basis whilst receiving guidance and direction from line manager. · To effectively prioritise and plan activities in advance, and to supply field visit forms to the line manager. · To manage promotional budget effectively, and to maximise the return on investment by ensuring value for money. · To respond to requests from both customers, and Scope employees promptly. · To monitor performance versus objectives and update the line manager at an agreed frequency. · To manage own time effectively and manage deadlines as appropriate without the need for management support. · To conduct monthly analysis of sales and activity, including the interrogation of the CRM system to plan effectively. Market Intelligence · Maintain an in-depth knowledge of the developments in the Optical arena. · To monitor the activities of competitors and feedback to the line manager and marketing department on a regular basis. Team working · To liaise effectively with Scope colleagues to maximise commercial effectiveness e.g., UK Optics Team · To liaise effectively with relevant third-party stakeholders to maximise commercial effectiveness. This will involve joint action planning on a regular basis. · To proactively seek to share best practice with colleagues to implement best practice. · To liaise with all Scope employees in a helpful and constructive manner as appropriate. Self-Development · To proactively seek feedback from customers, colleagues and management on personal performance, and to act on development areas highlighted by their response. · To construct a personal development plan with significant guidance from line manager and to take personal accountability for implementing this plan. · To continuously seek to improve personal skills, knowledge and competencies to improve performance. · To take part in all company training activities, and to continuously strive to excel. · To proactively identify personal development needs or areas for improvement in performance and to approach the line manager for support. Administration & IT Skills · Maintains the CRM System in a timely and accurate fashion provide detailed information on account and customer activities and insights. · Understands and uses all Company systems and business processes effectively. · To maintain all company equipment in a good state always. · To complete all company administration in a timely and accurate fashion. Qualifications • The jobholder will ideally possess a life science, technical or business degree., • The jobholder will be a pharmaceutical or medical devices sales representative with at least 3 years’ experience. They will ideally have experience in the Optical market. Specific Knowledge, Skills and Experience • Understanding of sales data – skills to interpret sales trends, handle collection, collation and use of data to assist in account and territory analysis/planning, • Understands and interprets substantial clinical information (disease and product) in a way that you will be comfortable interacting with professional customers on a peer to peer like level., • Competent in using Business Software e.g., CRM system, Expenses, Excel, PowerPoint., • Ability to work autonomously, and be capable of independently generating, prioritising and handling own work. · Able to work in a fast, dynamic, multicultural and matrix structure. Drive, energy, maturity, and ability to work under pressure and deliver results., • The jobholder will require a full driving licence. Scope provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

At Docker, we make app development easier so developers can focus on what matters. Our remote-first team spans the globe, united by a passion for innovation and great developer experiences. With over 20 million monthly users and 20 billion image pulls, Docker is the #1 tool for building, sharing, and running apps—trusted by startups and Fortune 100s alike. We’re growing fast and just getting started. Come join us for a whale of a ride! Docker is seeking a results-oriented Business Development Representative. The ideal candidate will be a self-starter with a proven track record of success in qualifying leads for commercial and enterprise-level accounts. Use prospecting strategies to reach out to existing users of Docker that demonstrate a propensity to acquire commercial licenses Identify the needs and challenges of the prospective customer Determine the prospect's interest in Docker Schedule discovery meetings for sales representatives and prospects Achieve a target number of qualified prospects and new opportunities Respond to and qualify incoming inquiries regarding interest in Docker products Craft a great first impression to our prospects and customers by adding value during every customer touchpoint Partner with cross-functional teams to share customer feedback Engage in team development and mentoring 1+ years of work experience in a Sales role A demonstrated track record of success Proactive and driven Excellent phone, writing, and listening skills A propensity and willingness to gain a strong understanding of the industry and basic use cases/value propositions that our product offers High integrity and a team-first mentality Detail-oriented and strong work ethic 4-year college degree or equivalent experience preferred Native English speaker is a requirement and fluency in another European language such as German, French, Spanish or Norwegian is a plus You will be welcomed with a first-in-class onboarding experience that includes equipment setup, a sweet swag package, and a collaborative training program You will learn how to navigate through award-winning sales tools such as; Salesforce, LeadIQ, Outreach, Sales Navigator, and Docker You will begin core SDR functions; prospecting, lead qualification, appointment setting go, warm handoffs, Salesforce hygiene, and pipeline management. You will work closely with your manager, shadow your peers, and partner with your Account Executive to develop prospecting strategies and campaigns unique to your territory At the end of your first month, you will have a proficient grasp of the tools and activities necessary to be successful in your role During your second month, you will be laser-focused on company research and identify target accounts and prospecting strategies in your territory Build prospecting lists for target accounts and key decision-makers and then reach out to them using all communication channels (cold calls, email, chat, and social media) You will comprehend and maintain in-depth knowledge of Docker’s products and have a great pitch Adhere to team KPI metrics and prospecting standards You will have an advanced understanding of tools, activities, and best practices to be successful in the BDR role In month three, you will be confident in your craft and ready to immerse yourself in your day job fully You will continue efforts to improve messaging, processes, and daily activities You will be an accomplished lead qualifier and an expert with tools and processes You will be ready to operate independently at full speed Docker does not offer visa sponsorship for this role. We use Covey as part of our hiring and / or promotional process for jobs in NYC and certain features may qualify it as an AEDT. As part of the evaluation process we provide Covey with job requirements and candidate submitted applications. We began using _ on April 13, 2024. Please see the independent bias audit report covering our use of Covey _. Perks Freedom & flexibility; fit your work around your life Designated quarterly Whaleness Days plus end of year Whaleness break Home office setup; we want you comfortable while you work 16 weeks of paid Parental leave Technology stipend equivalent to $100 net/month PTO plan that encourages you to take time to do the things you enjoy Training stipend for conferences, courses and classes Equity; we are a growing start-up and want all employees to have a share in the success of the company Docker Swag Medical benefits, retirement and holidays vary by country Remote-first culture, with offices in Seattle and Paris Docker embraces diversity and equal opportunity. We are committed to building a team that represents a variety of backgrounds, perspectives, and skills. The more inclusive we are, the better our company will be. #LI-REMOTE

About the Position The Associate Principal is a mid-level engineering role responsible for leading small- to mid-scale, multi-discipline projects with growing independence. You’ll guide projects from programming through closeout—clarifying requirements, coordinating design, documenting decisions, and ensuring deliverables meet TEECOM’s standards for quality and constructability. You’ll apply strong engineering judgment, maintain alignment with scope, schedule, and budget, and surface risks early to keep projects on track. You’ll strengthen TEECOM’s system by contributing to GitHub, documenting client-specific nuances, and improving standards, tools, and workflows. Externally, you’ll cultivate strong client relationships—building trust through clear communication, reliable follow-through, and thoughtful problem-solving. You’ll also begin developing credibility through thought-leadership activities by supporting pursuits, contributing technical narratives, participating in interviews, and helping develop content such as blogs, white papers, or presentations. Internally, you’ll mentor Designers and engineers through hands-on guidance, reviews, and feedback that strengthen discipline capability and reinforce TEECOM’s standards. While not a people manager, you’ll play a key role in developing TEECOM’s talent and reinforcing disciplined engineering practices. This position reflects strong engineering capability, reliable project leadership, and growing influence in shaping TEECOM’s systems, documentation, and delivery. • As an Associate Principal, your impact comes not only from the quality of your own discipline work, but from how effectively you guide project teams, strengthen coordination, and support the growth of TEECOM’s engineers. You contribute in three key ways:Mentor and Support Engineers, • You strengthen project teams by guiding Designers and Associates, reinforcing disciplined design practices, clear documentation, and sound technical judgment., • You contribute to TEECOM’s talent pipeline by serving as either a Mentor or a Mentee—helping grow others while also expanding your own capability., • As a Mentor: You accelerate others’ growth by setting expectations, providing clear direction, and reinforcing disciplined, high-quality work., • As a Mentee: You advance your own development by actively seeking feedback, applying guidance, and building readiness for larger scopes and leadership responsibilities.Contribute to Training and Knowledge, • You elevate team capability by actively engaging in design reviews, debriefs, and cross-discipline discussions that improve shared understanding and decision-making., • You strengthen discipline consistency by offering insights and clarification that help teammates apply standards correctly and develop stronger engineering judgment., • You support TEECOM’s learning culture by modeling disciplined documentation, fostering collaborative problem-solving, and shaping training resources that accelerate the growth of Designers and engineers.Improve the TEECOM System, • You reinforce firmwide consistency by applying standards reliably and maintaining clear, accurate discipline documentation that others can depend on., • You strengthen workflows by identifying gaps in templates, tools, or processes and offering improvements—through constructive feedback and Pull Requests—that reduce rework and improve scalability., • You enhance project predictability by sharing lessons learned, reinforcing best practices, and helping teams stay aligned and clear in their approach., • You deliver accurate, well-coordinated discipline designs on mid- to large-size projects with increasing independence and reliable follow-through., • You apply strong judgment—identifying risks early, resolving discipline conflicts, and supporting cross-discipline coordination., • You maintain disciplined documentation across drawings, specifications, calculations, and decision logs, enabling predictable project delivery., • You improve TEECOM’s system by providing actionable feedback, proposing workflow refinements, and submitting targeted Pull Requests., • You communicate clearly with clients and design partners—documenting decisions, clarifying requirements, and keeping teams aligned., • You mentor Designers, Associates, and production by providing guidance, markups, and timely feedback that strengthens their technical capability and documentation habits., • You collaborate closely with Project Leads and Group Leads to maintain alignment on scope, sequencing, and coordination strategy., • You support pursuits by contributing scope input, fee assumptions, and participating in interviews as needed., • You actively participate in client relationship development through networking events and conferences, direct outreach to clients and partners, and sharing intel gathered through documented interactions., • You deepen your discipline expertise through mentorship (as Mentor or Mentee), preparing for broader leadership responsibilities., • You model TEECOM’s Core Values—Care, Trust, and Value—through clear communication, disciplined execution, and proactive problem-solving., • These responsibilities and expectations represent what is required to successfully perform the essential functions of this role.Annual and Quarterly, • Partner with Project Leads, Group Leads, and senior engineers to strengthen coordination strategy, discipline consistency, and delivery reliability across projects., • Participate in performance assessments and demonstrate measurable growth in engineering judgment, project leadership, and system contribution., • Lead technical design reviews that reinforce TEECOM standards, improve documentation clarity, and identify coordination risks early., • Contribute to discipline standards, workflows, and tools through targeted Pull Requests and documented lessons learned., • Strengthen team capability by mentoring Designers and engineers through clear technical guidance, markups, and feedback., • Identify recurring coordination challenges or workflow gaps and recommend improvements that enhance delivery predictability and cross-discipline alignment., • When serving as a Mentor, provide structured quarterly feedback that supports technical growth and readiness for increased project leadership.Monthly and Biweekly, • Deliver coordinated discipline designs including layouts, calculations, specifications, and supporting documentation that align with engineering intent and TEECOM standards., • Partner with Project Leads to confirm scope, sequencing, coordination strategy, and evolving client requirements., • Participate in project and discipline meetings, communicating decisions, constraints, risks, and next steps with clarity., • Review Designers’ and engineers’ work, providing guidance that strengthens technical accuracy, coordination alignment, and documentation quality., • When assigned as a Mentor, delegate meaningful scope, clarify expectations, provide structured feedback, and hold regular check ins that strengthen technical growth, documentation habits, and decision making., • Maintain clear documentation of decisions, assumptions, and client specific nuances across GitHub and project tools to support consistent delivery., • Review discipline progress against scope, schedule, and coordination milestones and surface risks early to support Project Leads in maintaining alignment., • Maintain accurate and timely time and expense entries that support delivery accountability.Weekly and Daily, • Prepare and review layouts, markups, calculations, and related deliverables, resolving discipline-specific issues with sound engineering judgment., • Participate in coordination meetings, clearly communicating impacts, decisions, and required follow-up actions., • Provide guidance to Designers and engineers by clarifying expectations, reinforcing documentation standards, and supporting informed decision-making., • Maintain clear, up-to-date documentation across Asana, GitHub, and shared project platforms to support delivery alignment., • Execute design and documentation tasks with increasing independence while maintaining alignment with TEECOM standards and project priorities., • Communicate proactively with cross-discipline partners to confirm assumptions, surface risks early, and maintain coordination clarity., • Keep project notes, markups, and documentation current as work progresses to ensure transparency and continuity.As Needed, • Support programming sessions, site walks, surveys, or construction-phase coordination, documenting findings clearly to maintain alignment with design intent., • Contribute to pursuits by developing discipline scope assumptions, OPCC inputs, and interview support as needed., • Research products, codes, and design approaches that strengthen technical solutions and coordination outcomes., • Support other teams during heavy workload periods or complex project phases to maintain firmwide delivery momentum., • When assigned as a Mentee, meet regularly with your Mentor to review feedback, discuss project decisions, and strengthen technical judgment and discipline expertise., • Supervisory: When serving as a Mentor, you provide structured coaching and quarterly performance feedback for assigned mentees. You support day-to-day discipline execution by aligning Designers, engineers, and production team members with project priorities, scope, and documentation standards, while identifying dependencies, risks, and resourcing needs that inform workload planning., • Mentorship: Provide hands-on coaching and design guidance to Designers and engineers assigned to your projects. When paired as a Mentor, you hold regular check-ins, clarify expectations, review progress, and contribute input to quarterly and annual performance assessments. You reinforce disciplined documentation, communication, and coordination practices through clear guidance and example., • Training: Support the development of training content, participate in design reviews, and help team members strengthen technical and documentation skills through practical, project-based coaching., • Education: Bachelor’s degree in Engineering (Electrical preferred) or equivalent experience., • Experience: 6+ years of experience in AEC or related professional services with demonstrated discipline-specific capability. (ICT, Audiovisual, AV, Acoustics), • Preferred: Experience leading discipline portions of mid- to large-size projects, supporting coordination, and providing guidance to Designers or engineers., • Proven ability to deliver accurate, well-coordinated designs and make sound decisions within your discipline., • Strong understanding of project delivery workflows, client expectations, documentation standards, and cross-discipline coordination requirements., • Demonstrated experience contributing to documentation updates, standards refinement, or QA/QC workflows through GitHub Pull Requests or similar platforms., • Strong proficiency in Autodesk (AutoCAD, Revit), Bluebeam Studio, Microsoft 365 Suite, Google Workspace, and GitHub.Industry certifications preferred by discipline:, • CTS-D (Audiovisual) — preferred, • CDT — preferred, • EIT — plus, • PE — plus, • PMP — plus, • These physical demands represent what is required to perform the essential functions of this job. Reasonable accommodations will be provided as needed., • Prolonged desk work using a computer, keyboard, mouse, and telephone., • Regular reading, writing, and communication in virtual and in-person settings., • Occasional travel to client sites for meetings, surveys, or inspections., • Site walks may require standing or walking for extended periods, climbing stairs, and navigating construction or utility areas., • Field activities may involve bending, kneeling, or maneuvering in confined spaces., • May occasionally lift or move equipment weighing up to 25 pounds., • These work environment characteristics represent the conditions encountered while performing essential job functions. Reasonable accommodations will be provided as needed., • Approximately 75% of work is performed in a remote or office environment using standard office equipment., • Approximately 25% occurs at client sites, including construction environments and existing facilities., • Construction sites may include exposure to elevated noise levels, dust, uneven or unfinished walking surfaces, variable lighting conditions, and active construction operations., • Utility rooms and similar spaces may have restricted access or may not fully comply with ADA accessibility standards. When access limitations exist, TEECOM will support coordinating reasonable accommodations with site-controlling contractor or alternative means to perform essential job functions., • All accidents, near misses, and unsafe conditions must be reported immediately to the site superintendent and internally to People Operations.£85,000 - £105,000 a yearThis compensation will vary depending on your role-related skills, experience, knowledge, and subject matter expertise. TEECOM is committed to making sure that we are the right fit for each applicant and that each applicant is the right fit for our team. As we get to know each other throughout the interview process, the compensation may vary within the stated range. TEECOM offers a comprehensive benefits package to support employees and their families, including medical, dental, and vision insurance for employees and their dependents, basic and voluntary life insurance, short-term and long-term disability coverage, a 401(k) plan with profit-sharing contributions, paid parental leave, lifestyle and legal benefits, pet benefits, and performance-based bonuses. Full-time exempt team members also enjoy flexible time off, and all employees receive nine scheduled paid holidays.Your level will be evaluated and determined during the interview process. We are interested in every qualified candidate who is eligible to work in the United States. However, we are not able to sponsor visas. NOTICE TO THIRD PARTY AGENCIES: Please note that TEECOM does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, TEECOM will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, TEECOM explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of TEECOM.We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Hi, we’re Penfold - we’re on a mission to help everyone save enough to be comfortable in later life by making pensions accessible and engaging! There’s over a trillion pounds in UK pensions, but the industry is full of traditional providers with outdated products and poor customer service. Penfold is dragging the pension industry out of the dark ages with a platform built on modern technology. We’re demystifying pensions to make pension saving easy, accessible and engaging. We’re a focused team of 70 based primarily across London and Tallinn, and have raised significant funding from some of the most successful FinTech investors in the world. We manage over £1bn of pension assets for over 100,000 savers and thousands of businesses, and we’re growing rapidly every month. Our team is focused on building an amazing pension experience for our customers. As we scale, we’re strengthening our Partner Sales team to unlock significantly more growth from the accounting firms we already work with. As a Partner Sales Manager, you’ll be responsible for educating and growing our channel of accounting partners, with a clear commercial focus on driving new client onboardings from existing firms. This is a quota-carrying, field-oriented role, suited to someone who has sold successfully to accountants before and enjoys building strong relationships that convert into consistent deal flow. You’ll spend significant time meeting accountants face-to-face, attending events, and positioning Penfold as the pension solution that helps firms streamline day-to-day processing and spend more time on high-value client work. This is not a support role. You’ll own revenue targets and be accountable for performance across your partner portfolio. • Own a portfolio of existing accounting firms and grow client onboardings from them, • Increase penetration within firms by placing Penfold with more of their clients, • Consistently hit or exceed monthly and quarterly commercial targets, • Reactivate dormant or underperforming partners and reignite deal flow, • Recruit new stakeholders within accounting firms (partners, managers, payroll teams), • Educate firms on Penfold’s proposition and how it benefits both their practice and clients, • Position Penfold as a solution that streamlines pension processing and reduces admin, • Help firms move away from compliance-heavy workflows towards more efficient processes, • Develop strong relationships with firm owners and senior decision-makers, • Act as a commercial partner and trusted advisor, not just a product contact, • Be highly visible and proactive across your territory, • Represent Penfold confidently within the accounting community, • Spend significant time meeting accountants in person, • Attend and represent Penfold at accounting events, roadshows and conferences, • Organise and host coffees, lunches, drinks and small partner events, • Build a strong personal brand with accountants, • Maintain accurate pipeline management and forecasting in the CRM, • Share insights from partner conversations with Product, Marketing and Sales, • Help refine partner messaging, enablement and go-to-market strategy, • Continuously improve how we work with and sell through accountants This role is ideal for someone who is commercially driven, relationship-oriented, and motivated by winning deals, and who thrives in a field-based role where success is built on trust, presence and persuasion. • Proven experience selling to accounting firms, • Track record of hitting or exceeding commercial targets, • Experience recruiting, educating and growing accounting partners, • Confidence working with senior stakeholders and firm owners, • Comfortable owning a territory and being accountable for results, • Experience selling FinTech, SaaS, payroll, pensions or financial services, • Familiarity with regulated or trust-based products (e.g. Pensions, Investments, Payroll, Financial Services), • Experience working in a scale-up or high-growth environment, • Existing network within the UK accounting community, • You consistently hit or exceed your revenue targets, • Existing accounting partners deliver increased and predictable deal flow, • Dormant partners are reactivated and contributing again, • Accounting firms see Penfold as a trusted, long-term partner, • Penfold grows faster through its accountant channel, • Intro Call – A quick chat to introduce you to Penfold, learn about your experience and aspirations, and answer any questions., • Task – A practical task that we’ll complete together to determine how you’d approach a similar scenario to the role, • Culture Fit Session – Meet one of our Co-Founders and team members to see if we’re a great fit for each other. We’re 100% committed to building a diverse and representative team. Whatever your background, gender, race, age, or ability – we’d love to hear from you. If you have any questions, feel free to ask (even anonymously)! We’re all about giving every candidate the best chance to shine. If you require any reasonable adjustments to the job description, application, or selection process, just let us know — we’d be happy to help. When it comes to hiring, we focus only on your skills, experience, and how you live our values. As part of our hiring process, we may record your interview and use AI tools to generate notes. This helps us capture details accurately and ensures a fair review by our hiring panel. By attending an interview with Penfold, you consent to the use of recording and AI-generated notes for this purpose. If you have any concerns or would prefer not to be recorded, please let us know in advance. We’re working hard to create a workplace where people feel empowered to do their very best work, make a big impact, and enjoy what they do. Here’s what we offer: • Competitive salary – we proactively review salaries to ensure fairness and progression, • Meaningful share options – you’ll own a part of Penfold and share in our success, • 10% pension contribution each month that you don’t need to match (on top of your salary), • Medical insurance – through Vitality, including private GPs, physio, counselling, and great discounts (think 50% off PureGym memberships, free Apple Watches, and more), • Unlimited holidays – we trust you to get the work done and take breaks when needed, • Great office space (https://theministry.com) – our private office is run by the Ministry of Sound!, • Free company lunch every week (think Borough Market and Mercato Metropolitano!), • Top-tier MacBook and WFH equipment to set you up for success, • Cycle to work scheme – buy a bike tax-free and spread the cost, • Learning & professional development – we support courses, events, and coaching to help everyone reach their goals, • Quarterly company socials – plus plenty of regular team meetups! Excited to join us? Apply now!

Lifting Equipment If you're looking for a field-based role with excellent earning potential, ongoing training and genuine career progression, this could be the opportunity for you. Workshop Recruitment is recruiting on behalf of a well-established engineering business that is continuing to grow across the South East. As a Lifting Equipment / LOLER Engineer, you'll work across customer sites carrying out inspections, servicing and repairs while ensuring equipment remains safe and compliant. This role offers ongoing support, LEEA training and the chance to develop your career as a Lifting Equipment / LOLER Engineer . Key Responsibilities Carry out LOLER inspections and thorough examinations. Service and repair hoists, slings, shackles and gantries. Ensure compliance with LOLER and PUWER regulations. Complete inspection reports and certification accurately. Diagnose mechanical faults and carry out repairs. Provide excellent customer service on site. Maintain company equipment and vehicle. Follow all health and safety procedures. Skills & Experience Experience as a Lifting Equipment / LOLER Engineer, lifting equipment engineer or within mechanical engineering. Knowledge of LOLER and PUWER regulations. NVQ, City & Guilds or equivalent engineering qualification. Full UK driving licence. Strong fault-finding and mechanical skills. Good written communication for inspection reports. Ability to work independently in a field-based role. Benefits Overtime paid at 1.5x. Company van and fuel card. LEEA training and ongoing development. Career progression opportunities. Nest pension. Staff referral incentives. Private Medical (after probation). Life Insurance. Cycle to Work scheme. TPBN1_UKTJ

Location: Whiteley, Fareham (with regular UK travel to customer sites) Industry: MedTech / Healthcare Technology Overview We are supporting a rapidly growing MedTech start-up in the recruitment of a Support Engineer to join their expanding team. This is a highly visible, customer-facing role where you will provide technical support, troubleshooting, and maintenance for advanced electro-mechanical equipment deployed in hospital environments across the UK. This position requires a strong blend of mechanical, electrical, and software understanding, combined with excellent communication skills to liaise confidently with senior clinical and technical stakeholders. Key Responsibilities • Provide on-site and remote technical support for electro-mechanical medical equipment, • Diagnose, troubleshoot, and resolve faults spanning mechanical, electrical, and software systems, • Install, commission, and configure equipment at customer sites, • Act as a trusted technical liaison with hospital staff, clinicians, and senior stakeholders, • Perform routine servicing, preventative maintenance, and system upgrades, • Analyse system performance and identify root causes of issues, • Escalate complex issues internally and collaborate with engineering and product teams, • Maintain accurate se...

Due to continued expansion our client is looking to add a skilled CNC Turner / Miller to their manufacturing team., working within a modern machine shop, the successful CNC Turner / Mille r will play a key role in producing precision-engineered components across a variety of materials. This is a hands-on position offering variety, responsibility, and the chance to develop your skills within a supportive environment. Key Responsibilities Set up, programme, and operate CNC turning and milling machines. Produce precision components from technical drawings and specifications. Interpret CAD drawings and SolidWorks models accurately. Carry out quality inspections using standard measuring equipment. Select and set up tooling for a range of materials and applications. Troubleshoot machine issues and carry out basic machine maintenance. Support wider production activities, including plastics manufacturing processes when required. Maintain a safe, organised, and efficient working environment. Skills & Experience Required Previous experience as a CNC Turner / Miller in a manufacturing environment. Ability to programme CNC machines from scratch. Strong knowledge of both CNC turning and milling processes. Experience reading and interpreting engineering drawings and CAD models. Familiarity with Siemens, Fanuc, or similar CNC controls. Good understanding of tooling, fixtures, and machine setup. Competent using hand tools, workshop equipment, and measuring instruments. Strong attention to detail with a proactive and organised approach. Benefits Bonus scheme Medical insurance Company pension TPBN1_UKTJ

Role: CNC Turner Location: Havant Salary: £18.00 - £20.00 per hour Our client is a well-established precision engineering and manufacturing business based in Havant. Due to continued growth, they are looking to recruit an experienced CNC Turner to join their machine shop team. The successful candidate will be responsible for programming, setting and operating CNC turning machinery to manufacture high-quality precision components to tight tolerances. While the role is primarily focused on CNC turning, there will also be opportunities to support milling operations where required. CNC Turner Position Overview Programming, setting and operating CNC turning machines. Manufacturing precision-engineered components from engineering drawings. Working with Pro Trax and Siemens 828 control systems. Producing components to tight tolerances and quality standards. Conducting first-off, in-process and final inspections. Selecting, setting and changing tooling as required. Identifying and resolving machining and programming issues. Supporting CNC milling operations as required to meet production demands. CNC Turner Position Requirements Previous experience programming, setting and operating CNC lathes. Experience working with Fanuc controls would be highly advantageous. Ability to read and interpret engineering drawings. Strong understanding of machining practices, tooling and tolerances. Experience using inspection and measuring equipment. Previous CNC milling experience would be beneficial, although not essential. Based within a commutable distance of Havant. CNC Turner Position Benefits £18.00 - £20.00 per hour depending on experience. 37.5-hour working week (Monday to Friday, 07:30 - 16:00). Overtime available. Performance-related bonus scheme. Private medical insurance. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. TPBN1_UKTJ

Due to continued expansion our client is looking to add a skilled CNC Turner / Miller to their manufacturing team., working within a modern machine shop, the successful CNC Turner / Miller will play a key role in producing precision-engineered components across a variety of materials. This is a hands-on position offering variety, responsibility, and the chance to develop your skills within a supportive environment. Key Responsibilities Set up, programme, and operate CNC turning and milling machines. Produce precision components from technical drawings and specifications. Interpret CAD drawings and SolidWorks models accurately. Carry out quality inspections using standard measuring equipment. Select and set up tooling for a range of materials and applications. Troubleshoot machine issues and carry out basic machine maintenance. Support wider production activities, including plastics manufacturing processes when required. Maintain a safe, organised, and efficient working environment. Skills & Experience Required Previous experience as a CNC Turner / Miller in a manufacturing environment. Ability to programme CNC machines from scratch. Strong knowledge of both CNC turning and milling processes. Experience reading and interpreting engineering drawings and CAD models. Familiarity with Siemens, Fanuc, or similar CNC controls. Good understanding of tooling, fixtures, and machine setup. Competent using hand tools, workshop equipment, and measuring instruments. Strong attention to detail with a proactive and organised approach. Benefits Bonus scheme Medical insurance Company pension

Benefits: £: Competitive salary Contributory Pension Scheme (up to 8% company contribution) 6 times salary 'Life Assurance' with pension 25 days holiday (increasing with service) + statutory public holidays, plus opportunity to buy and sell up to 5 days (37hr) Car/Car allowance (dependant on grade/ role) Flexible Benefits scheme with extensive salary sacrifice schemes, including Health Cashplan, Dental, and Cycle to Work amongst others Enhanced sick pay Enhanced family friendly policies including enhanced maternity, paternity & shared parental leave Private Medical Insurance - dependant on grade Work Culture 37hr working week, although hours may vary depending on role, job requirement or site-specific arrangements. Early 1.30pm finish Friday, start your weekend early! Remote, hybrid and site based working opportunities, dependant on your needs and the requirements of the role. Up to 5 paid days volunteering each year. Flexible working culture focused on output, with more formal flexible working arrangements on request (assessed subject to role) - please highlight any requests to the Talent Acquisition team. About us At Raytheon UK, we take immense pride in being a leader in defence and aerospace technology. As an employer, we are dedicated to fuelling innovation, nurturing talent, and fostering a culture of excellence. Joining our team means being part of an organisation that shapes the future of national security whilst investing in your growth and personal development. We provide a collaborative environment, abundant opportunities for professional development, and a profound sense of purpose in what we do. Together, we are not just advancing technology; we're building a community committed to safeguarding a safer and more connected world. Our Business As a leading defence and aerospace company operating across the United Kingdom, Raytheon UK helps to solve our customers' toughest challenges. We are a major supplier to the UK government and customers around the globe, providing defence solutions across all domains: land, sea, air, space, and cyberspace. We also provide digital and training transformation solutions to commercial and military customers. With circa 2000 employees and major facilities operating throughout the UK including Broughton (Wales), Livingston and Glenrothes (Scotland), and Harlow, Gloucester, and Manchester (England); we are committed to investing in British careers and technology development. Through advanced technology and our people's expertise, our Training Transformation Services is modernising what's possible in the training and preparation of our armed forces. With a real blended approach to learning and using the latest innovative systems and technology, we ensure our service men and women really are prepared for any situation. The Role To deliver high quality Electrical Maintenance within their SQEP on Training Equipment in line with Company standards and contractual requirements. Based predominately in the Portsmouth area there will a requirement to travel to sites in the West Country & Scotland. Main duties will include: Key Responsibilities: Continually improve the way they contribute to the business Ensure that they are best equipped to support future change Ensure that they work in an effective collaborative manner with MoD staff, displaying the appropriate behaviours always. Be 'Responsible for championing and fostering a culture of Environmental, Health, and Safety (EHS) compliance and continuous improvement'. Any other duties required to complete the Training Equipment Service. To assess reported breakdowns for rectification or escalation to external resource To act as the front line maintainer for breakdowns of Training Equipment assessed for rectification as directed by Maintenance Team Lead To liaise with external resources and assist as required to aid rapid rectification of defects outside of their SQEP. Carry out Planned Maintenance as directed by Maintenance Team Lead. Required experience Previous experience of servicing electrical equipment in a marine and/or military environment. Previous experience of fault finding, diagnosing and repairing electrical equipment. Level 3 NVQ Diploma in Electrotechnical Technology or equivalent in an Electrical Engineering discipline. 18th Edition Problem solving Mind set IT literate Ability to work unsupervised. Desirable experience Experience of using Computerised Maintenance Systems Driving Licence Experience or knowledge of working on mechanical equipment. RTX Raytheon UK is a landed company and part of the wider RTX organisation. Headquartered in Arlington, Virginia, USA, but with over 180,000 employees globally across every continent, RTX provides advanced systems and services for commercial, military and government customers worldwide and comprises three industry-leading businesses - Collins Aerospace Systems, Pratt & Whitney, and Raytheon. Supporting over 35,000 jobs across 13 UK sites, RTX is helping to drive prosperity. Each year our work contributes over £2.7bn to the UK economy and offers a wealth of opportunities to 4,000 suppliers across England, Scotland, Wales and Northern Ireland. We're investing in all corners of the country, supporting 29,040 jobs in England, 3,040 in Northern Ireland, 1,900 in Scotland and 1,600 in Wales. RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. TPBN1_UKTJ

Do you excel at diagnosing complex refrigeration issues and enjoy being the trusted expert for your customers? Our client, a leading global HVAC & Refrigeration company is looking for a skilled Refrigeration Engineer to deliver high-quality, reliable support to their customers. This is a fantastic role for someone who enjoys building relationships and using the latest diagnostic technology to solve complex problems in a field-based position. On Offer: Base salary of up to £48,000 per annum with an OTE of £65,000+ Company van & door to door payment Private Medical Insurance Company bonus Death in service Enhanced pension 25 days holiday + bank holidays and option to purchase additional days Fantastic career progression opportunities Key Responsibilities: Diagnose and repair faults on a wide range of commercial and industrial plants and equipment using cutting-edge diagnostic tools. Carry out planned preventative maintenance, emergency breakdown repairs and commissioning work on customer sites. Act as the main point of contact for your customers, building trusted, long-term relationships. Participating in an on-call rota. Who They’re Looking For: Proven experience as a field-based Service Technician or Refrigeration Engineer. Excellent communication and customer service skills, with the ability to build rapport. Strong diagnostic and problem-solving abilities. Confidence using diagnostic software, mobile apps and MS Office. NVQ L2 in Refrigeration and Air Conditioning or equivalent industry related qualification A valid F-Gas certification (or equivalent). * A full UK driving licence and the right to work in the UK. If you're a skilled Refrigeration Engineer with proven field experience and excellent communication skills, this is an excellent opportunity to advance your career with a company that prioritises career development

Project Coordinator - Testing & Certification Location: Fareham Sector: Defence, Aerospace, Rail Type: Full‑time Salary: Competitive + benefits An exciting opportunity has arisen to join a specialist Project Management team working with cutting‑edge technologies in the Testing, Inspection and Certification (TIC) industry. This role is ideal for someone who thrives in a technical environment, enjoys working with multiple stakeholders, and takes pride in delivering high‑quality project outcomes. About the Role You will coordinate test and certification projects for components used in transport‑related applications. These projects span a wide range of laboratory‑based testing disciplines, including environmental testing, mechanical shock and vibration, packaging, EMC (defence and civil), battery testing, radio frequency, product safety and SAR testing. Acting as the key link between clients and internal technical teams, you will ensure projects are delivered on time, within scope and budget, and that final test reports are issued promptly to support clients' qualification programmes. Key Responsibilities Client liaison - Serve as the primary point of contact from project initiation to completion. Project delivery - Ensure all projects meet contractual timelines, scope and budget, maintaining profitability. Planning & tracking - Produce detailed project plans and maintain accurate forecasts using internal project management tools. Workflow coordination - Work closely with test supervisors to ensure smooth scheduling, sample delivery and documentation flow. Commercial management - Support timely and accurate invoicing and resolve issues affecting financial performance. Resource coordination - Arrange subcontract testing, specialist equipment hire and third‑party involvement as required. Client visits - Attend client meetings when needed. Administrative support - Complete all administrative tasks associated with project delivery.Essential Experience & Skills Experience as a Project Coordinator within Defence or Aerospace. Strong organisational skills with the ability to prioritise and multitask. A proactive mindset with the ability to anticipate issues and drive improvements. Strong customer focus and understanding of client needs. Balanced technical judgement and commercial awareness. Competent user of Microsoft Office and business management tools. Excellent communication skills (written, verbal and telephone). A positive, collaborative team player with a "can‑do" attitude. Self‑driven, results‑oriented and adaptable to change.What's on Offer The employer provides a competitive salary and a comprehensive benefits package, including: Minimum 33 days holiday (including public holidays) Contributory pension scheme Life assurance Salary exchange options (holiday buy/sell, cycle to work, pension) Incentive schemes Wellbeing support (EAP, dental scheme, occupational health) Potential eligibility for hybrid/home working, company car/car allowance and private medical insurance (role‑dependent)Workplace Culture You'll be joining a diverse, international organisation where collaboration, continuous improvement and positive engagement are core values. The ideal candidate embodies the principles of owning their work, seeking improvement, and maintaining a positive approach. Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, corperate members for Neurodiversity in business, Disability Confident committed members, Gold status for the Armed Forces Covenant, Bronze trail blazers for Racial Equality matters and Age Freindly Employer pledge members. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website

Maintenance Engineer An excellent opportunity has arisen for an experienced Maintenance Engineer to join a busy manufacturing facility in Fareham. Reporting to the Maintenance Manager, you will be responsible for maintaining production equipment, maximising uptime, and supporting operational performance through a combination of planned and reactive maintenance activities. This is a hands-on role requiring strong electrical and mechanical fault-finding skills, a proactive approach to problem-solving, and a commitment to health, safety, and continuous improvement. Key Responsibilities • Carry out planned preventative maintenance to maximise equipment reliability and minimise downtime., • Respond to breakdowns, diagnose faults, and complete repairs safely and efficiently., • Maintain accurate maintenance records using the CMMS system., • Support continuous improvement activities to enhance equipment performance and OEE., • Assist with machine setup, commissioning, changeovers, and production support activities., • Ensure all work is completed in line with health, safety, environmental, and quality procedures., • Support the development of maintenance procedures, SOPs, and risk assessments., • Monitor spare parts usage and help maintain appropriate stock levels., • Maintain high standards of housekeeping and workshop organisation., • Work collaboratively with production, engineering, and planning teams to support operational objectives. Ideal Experience & Skills • NVQ Level 3 (or equivalent) in an Engineering discipline., • Minimum 5 years’ experience in a maintenance engineering role within a manufacturing environment., • Strong electrical and mechanical maintenance and fault-finding experience., • Experience maintaining production machinery and equipment., • Knowledge of preventative maintenance systems and CMMS software., • Good understanding of health and safety requirements, including risk assessments and COSHH., • Strong problem-solving skills and the ability to work independently. Desirable • Forklift, IPAF, or PASMA certification., • Experience within a regulated manufacturing environment., • Knowledge of continuous improvement methodologies and equipment reliability practices., • Proficiency with Microsoft Office applications. Salary: £45,860 - £47,860 (Including Shift Allowance) Hours: Double Day Shifts Benefits: • Company Bonus Scheme, • Private Medical Care If you could be interested in this excellent Maintenance Engineer opportunity, please apply and we'll be in touch with further details

Role: CNC Turner Location: Havant Salary: £18.00 - £20.00 per hour Our client is a well-established precision engineering and manufacturing business based in Havant. Due to continued growth, they are looking to recruit an experienced CNC Turner to join their machine shop team. The successful candidate will be responsible for programming, setting and operating CNC turning machinery to manufacture high-quality precision components to tight tolerances. While the role is primarily focused on CNC turning, there will also be opportunities to support milling operations where required. CNC Turner Position Overview Programming, setting and operating CNC turning machines. Manufacturing precision-engineered components from engineering drawings. Working with Pro Trax and Siemens 828 control systems. Producing components to tight tolerances and quality standards. Conducting first-off, in-process and final inspections. Selecting, setting and changing tooling as required. Identifying and resolving machining and programming issues. Supporting CNC milling operations as required to meet production demands.CNC Turner Position Requirements Previous experience programming, setting and operating CNC lathes. Experience working with Fanuc controls would be highly advantageous. Ability to read and interpret engineering drawings. Strong understanding of machining practices, tooling and tolerances. Experience using inspection and measuring equipment. Previous CNC milling experience would be beneficial, although not essential. Based within a commutable distance of Havant.CNC Turner Position Benefits £18.00 - £20.00 per hour depending on experience. 37.5-hour working week (Monday to Friday, 07:30 - 16:00). Overtime available. Performance-related bonus scheme. Private medical insurance.Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for

Marble Talent Group are currently recruiting for a Commercial Gas Installation Engineer on behalf of a well-established company based in Fareham. This is a hands-on installation-focused role, ideal for an experienced engineer with a strong background in commercial gas installations, plant room upgrades, pipework, commissioning, and system upgrades across commercial sites. The successful candidate will be responsible for delivering high-quality installation work across a variety of commercial environments while maintaining excellent standards of safety, workmanship, and customer service. Key Responsibilities • Carry out commercial gas installations, upgrades, and replacement works, • Install commercial boilers, heating systems, plant room equipment, and associated pipework, • Complete first and second fix installation work to a high standard, • Commission newly installed commercial gas systems and equipment, • Diagnose and resolve installation-related issues on site, • Read and interpret technical drawings and specifications, • Ensure all works are completed in line with current gas regulations and health & safety requirements, • Liaise professionally with clients, site managers, and other trades on site, • Work independently and as part of a wider installation team Requirements Candidates must hold relevant commercial gas qualifications, including: • CCN1 – Core Domestic Gas Safety, • CEN1 – Domestic Central Heating Boilers, • COCN1 – Core Commercial Gas Safety, • CODNCO1 – Changeover Domestic to Commercial, • ICPN1 – First Fix Pipe Installation (<75mbar), • TPCP1A – Test and Purge, • CENWAT – Boilers & Water Heating Appliances, • CIGA1 – Indirect Fired Heating Appliances, • CDGA1 – Direct Fired Heating Appliances Additional Requirements • Proven experience in commercial gas installation work, • Experience working on plant rooms and commercial heating systems, • Strong pipework and commissioning experience, • Ability to work from drawings and technical specifications, • Full UK driving licence (preferably clean) Benefits • 25 days annual leave, • Door-to-door pay, • Employee Assistance Programme, • Private medical insurance, • Life assurance, • Dismemberment/disability insurance, • Cycle to work scheme About Marble Talent Group Marble Talent Group are specialist engineering recruiters dedicated to supporting candidates at every stage of their careers. We pride ourselves on matching talented individuals with the right opportunities, helping them grow into successful professionals within the engineering sector

At TÜV SÜD we are passionate about technology. Innovations impact our daily lives in countless ways, and we are dedicated to being a part of that progress. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD. Role Overview: TUV SUD are looking for a Shift Technician to join our team following continued business growth! Working as part of a team of technical technicians and engineers, the Shift Technicians will perform RF (Radio Frequency) testing within our brand-new state of the art test facility. This role will require the successful candidate to contribute to a rotating shift pattern to cover the demand for 24/7 testing. The shift pattern will involve rotating across two shifts (9:45am-10:15pm or 9:45pm-10:15am with 30 minute break) on a 4 shifts on, 4 shifts off basis. Initial training will be delivered on a shift pattern of Monday-Friday, 37 hours per hour, 8:30am-5:00pm before transferring to the shift rotation after training. Duties and Responsibilities: Being part of a team delivering test services as part of a 24-hour, 7 day shift pattern, undertaking RF test in accordance with harmonised test standards (the most common being ETSI and FCC), or customer specific test plans, within the RF test facilities at Octagon House. Control and monitor the test equipment calibration status during testing. Working with customers during attended testing. Close liaison with the Project Manager to ensure work is carried out accurately and within the agreed timescales. Accurate recording of results following company quality procedures and providing clear, concise communication at end of shifts. Essential Criteria: Educated to NVQ level 3 in Electrical / Electronic Engineering or have hands on practical experience in an engineering environment Experience with RF test equipment like spectrum analysers or Oscilloscopes. Motivated and enthusiastic. Have a good understanding of IT systems such as Microsoft Word, Excel and Outlook. Conscientious with good interpersonal and customer skills and commercial awareness. Have proven ability of documenting results accurately. Willing to work as part of a team on 24 hour / 7 day shifts performing radiated RF testing using automated test scripts. * Are able to access the site independently as public transport will not always be available due to shift patterns. Further information: TÜV SÜD in the UK offers a competitive salary and benefits package that includes a minimum of 33 days holiday entitlement (for full-time employees, including public holidays), a contributory Group Personal Pension Plan and a non-contributory Group Life Assurance Scheme. We also offer various Salary Exchange/Sacrifice schemes (buying/selling holiday, cycle to work scheme, pensions), incentive schemes and comprehensive wellbeing support (Employee Assistance Programme, Dental Scheme and Occupational Health services). Dependent on their role, employees may also be eligible for hybrid/permanent home-working, a Company Car/Car Allowance and Private Medical Insurance At TÜV SÜD, we have employees from more than 100 different countries collaborating together. People of different backgrounds, skills, and pursuing different life goals. Our strength comes from these countless and varied perspectives. We are committed to be an inclusive and diverse workplace by welcoming people of all backgrounds. We want Diversity & Inclusion (D&I) to be a foundation of our company and create an environment where all our employees can trust they will be treated with respect, regardless of gender, nationality, ethnic background, faith, beliefs, disabilities, age, sexual orientation, or identity. As such, our employees are expected to behave at all times in a manner consistent with TÜV SÜD Code of Ethics and Company values. We firmly believe embedding D&I in the heart of what we do will inherently contribute to the success of TÜV SÜD. Click here to find out more about Diversity at TÜV SÜD