Production assembly jobs in BoltonCreate job alerts

Are you experienced in fine pitch soldering or microelectronics assembly?Do you enjoy precision work under a microscope, working with extremely small components in a clean, controlled environment?Were supporting a UK defence manufacturer on the lookout for a detail focused Microelectronics Assembly Operator to join a xrnqpay high performing production team working on advanced electronic assemblies.This ro...

Our client is a leading company in their industry, proud of innovation, quality, and a commitment to excellence.As an Assembly Operator, you will be an integral part of our dynamic production team, contributing directly to the success of our operations.Read and interpret technical drawings, schemati

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Wiring Operator on an initial 12 month contract and then ongoing and long-term thereafter. Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £28.35ph for the first 12 weeks and then £29.70 after week 12 (Umbrella). Overtime Rates of 'time and a half' for all hours worked over 37 hours per week. Electrical Wiring Operator Job Description: An exciting opportunity for a Skilled Electrical Wiring Operator to join our Calibration and Maintenance team for a 12-month period in a fast-paced but friendly and inclusive Manufacturing environment. We are seeking a Skilled Wire Operator to join our Calibration & Maintenance Team, to fault diagnose and repair bespoke cabling to drawing specifications. Fault finding and subsequent repair of cable assemblies. Carry out surface mount repair on CCAs. Maintain and repair test/measuring equipment to component level. PAT testing across the manufacturing site. Interrogate drawings during fault finding activities. Safety systems testing of Test & Measuring equipment in line with documented procedures. Provide Technical support to facilitate the efficient servicing of STTE to enable production testing of hardware and repair phases of the contract. Maintain excellent workspace husbandry disciplines. Maintain a high degree of tool control and FOD practices. Assist with maintenance of manufacturing aids as and when required. What we're looking for from you: All three of the below are required: Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved IPC 620 & Dynamic Cabling certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable

An exciting opportunity for an experienced Electrical Test Operator to join our Manufacturing Operations team in a fast-paced but friendly and inclusive Manufacturing environment. Salary: £42,558 Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: This opportunity is for an Electrical Test Operator to join the Manufacturing team supporting test and certification of a variety of electrical hardware builds, ranging from small fixtures through to complex missile systems, during all phases of the product lifecycle. You will be providing operations support to ensure programme targets are met to agreed time, cost and quality requirements. Ensuring that completed hardware builds are tested in accordance with drawing requirements and specifications; Maintaining a safe working environment in-line with 5S policies Always aiming to deliver in line with all time, cost and quality requirements Ensuring assembly unit production costs are met Maintaining, to the highest level, workmanship standards and product quality Ensuring the completion of all manufacturing documentation Working closely with fellow Operators, Engineering and Quality to overcome any technical challenges and offer feedback for continuous improvement activitiesYou will be working with a large team of multi-disciplined operators in a fast-paced but friendly and inclusive Manufacturing environment. The team has a great mix of people, ranging from apprentices through to experienced skilled technicians, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) Practiced in reading and understanding assembly drawings and planning instructions Fully conversant with all Manufacturing equipment, tools and measuring instruments Uses their initiative and can work without close supervision Goes 'the extra mile' to get work finished to a high standard Flexibility and adaptabilityOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDAUK), Instagram (MBDAUK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Job Title: Production Operative Location: Farnworth, Bolton, BL4 0AN Salary: Starting at £12.71 per hour Job Type: Full time, Permanent Working Hours: 07:30 to 16:00 Monday to Thursday 07:30 to 12:50 Friday (38 hours per week) About Us: As one of the UK's leading heating element manufacturers, Backer Heatrod offer a wide range of products from standard straight elements through to customer bespoke equipment. Our success is built on our ability to satisfy our customers by providing quality products, outstanding customer service and delivering on time every time! We combine a growing industrial manufacturing base with a thriving distribution business. About the Role: We are seeking a reliable and hardworking Production Operative to join our manufacturing team specializing in the production of heating elements. This is a hands-on role in a fast-paced environment where precision and quality are key. You'll be part of a dedicated team assembling components into finished units used in a wide range of heating applications. It's essential that you have experience in a manufacturing environment. Key Responsibilities: Following our standard operating procedures, assemble components following technical drawings and specifications Work alongside the team in ensuring that production plan is met on a daily/weekly and monthly basis Conduct inline quality checks through the process to ensure products meet required standards Maintain a clean and safe working environment Report any faults or issues to our technicians/production manager Follow health and safety procedures at all timesWhat We're Looking for: Experience in a manufacturing environment Some experience in hot works is desirable - e.g. soldering/brazing and welding Good attention to detail and manual dexterity Demonstrable experience reading engineering drawings and using measuring equipment Ability to follow instructions and work as part of a team Willingness to learn and take on new tasks Good IT skills Basic understanding of health and safety practicesWhat We Offer: Full training and support Opportunities for career progression Friendly and inclusive working environment Company pension scheme On-site parkingPlease Note: No agencies. Please click the APPLY button to send your CV and Cover Letter for this role. Candidates with the relevant experience or job titles of: Manufacturing Operative, Manufacturing Engineer, Assembly Technician, Production Operative, Production Technician, Process Operator, Production Engineer, Assembly Operative, Assembly Line Operator, Process Operative, Manufacturing Operator, Production Operator, Production Coordinator may all be considered

World Class Defence Organisation based in Bolton is currently looking to recruit 2x General Operative’s with very strong Soldering experience an initial 12 month contract. This position will specifically require experience with strong soldering or Circuit Card Assembly (CCA) or PCB Assembly experience. Any prior microelectronics experience would be great, i.e. soldering under a microscope. You will also need experience working within a manufacturing environment. Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph. Overtime hours (over 37 hours) are at normal hourly rate plus 50% Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Job Spec: The General Operator will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Carry out detailed standard assembly / manufacturing activities, undertaking all work to requisite procedures, quality standards, safety requirements and timescales. Very good Soldering experience is required Any experience of soldering under a microscope or in a similar environment would be great Any Looming or PCB experience would be great Previous background of working in a Production Technician or Assembly Operative role would be great Contribute to the efficient movement of work and information in the manufacturing area. Adhere in all activities to agreed standards and behaviours. Comply with all health and safety requirements. IPC 610 certified / trained preferred. Dexterity for fine work. Read and interpret layouts. Follow instructions. Willing to work flexible shift patterns. Attention to detail. Work on own with minimal supervision. Flexible. ESD training. Desirable skills: PC literate. Colophony health surveillance

Our client has an opportunity for a Mechanical Engineer to join their Calibration and Maintenance Team. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business. Role: Mechanical Engineer Location: Bolton, fully onsite Hours: 37 per week Hourly Rate: £32-£35 per hour via Umbrella, inside IR35 Clearance: SC required before starting What you'll be doing: The main aspects of the role will be as technical support for the metrology department supporting COTS (commercial of the shelf) equipment and STTE (Special to type test equipment) calibration and maintenance. You will be required to assist production with technical queries on fixtures and tooling along with supporting CMM (Co-ordinate measuring machine) inspection work. You will be required to guide operators on best practice within the metrology department on day-to-day technical queries alongside looking at ways to improve process and measurement techniques within the department. You will also give technical support for mechanical calibration such as high/low pressure & temperature calibrations. Requirements: Minimum qualification: HNC in Mechanical Engineering. Experience and knowledge of calibrating torque tools to ISO 6789-2:2017 required. Good knowledge of Geometric Dimensioning & Tolerancing (GD&T) required. Experience and knowledge in dimensional calibration required Experience and knowledge of using and creating programs for coordinate measuring machine required. Good knowledge of temperature and pressure calibration desirable Able to deal with multiple issues, tasks and priorities concurrently.If you are interested in applying for this position and you meet the requirements, please apply immediately! Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. "Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

Are you an Electrically bias Maintenance Engineer looking for a career within the supply chain of the automotive industry? Would you like to be trained up in the maintenance of some brand new equipment and lines that is currently being installed onsite? Happy working in a clean room environment for a world renowned company? Would you like to work for a company that values it's employees and breeds an excellent culture on site that can't be matched? Is a shift pattern of working 06.00-14.00 / 14.00-22.00 / 22.00-06.00 something you'd be happy to do? Finally is Bolton an area that you can easily commute to work for a salary of Circa £46000 (DOE)? If you have answered "yes" to all the above questions then please read on and apply if interested. Suitable candidates will be called and given additional information on the company and the position. Your role will include; Troubleshooting, repair and maintenance of high-volume PLC controlled production equipment. Planning and performing equipment preventative maintenance. Improvement and modification of assembly/ test equipment and transfer systems. Service and maintenance of electrical and mechanical site services/plant. *Supporting the installation of new equipment. Ideal candidates will have the following attributes; Ideally qualifications in Electrical Engineering to back up your experience. Time Served Apprenticeship. Significant experience within manufacturing. Proven experience on Repair, Maintenance and Process Improvement. Ideally experienced in maintenance and fault finding PLC controlled and robotic equipment. Experience of maintaining and fault finding hydraulic and pneumatic systems. Pro-actively identifies and suggests improvements based on findings of preventative maintenance and fault finding.. Understanding or preventative maintenance schedules. In return the company offers a multitude of incentives and benefits, including, yearly pay increases, bonus scheme, rewards and recognition, gifts, great sports and social calendar, free drinks and parking. Location - Horwich Salary - Circa £45000 (dependant on experience) Shift - 6-2 / 2-10 / 10-6 rotating Kinetic plc is a Recruitment Consultancy with over 40 years of experience of delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications with a high degree of care, we review all submissions and will attempt to contact applicants who match the job profile. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities. S&K1

An opportunity has become available at the MBDA UK Bolton site to work as part of a team of experienced engineers to support the increasing product delivery requirements, maintaining and improving processes and standards to achieve this. Salary: Circa £43,000 depending on experience Dynamic (hybrid) working: Minimum of 4 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As a Process Engineer, you will work as part of the Printed Circuit Card Assembly (PCBA) manufacturing business unit with a focus on the manufacture of our products. The Circuit Card Assembly (CCA) Business unit produces high complexity products with a high mix, low volume output. The business unit is rapidly growing in order to achieve the large backlog of orders over the next 5-10 years, with the production output more than tripling. You will be a part of the process engineering team working closely with test, manufacturing and quality engineers whilst building strong relationships with stakeholders including the operations, design support and calibration and maintenance teams. This role reports to the Principal Process Engineer within the CCA business unit. The Role: You will be responsible for various technical aspects of PCBA. This will involve working on creating and maintaining standards, identifying and carrying out continuous improvement activities, solving technical problems, all whilst considering quality as intrinsic to the role. The opportunity also allows you to grow your knowledge within manufacturing as part of development into future opportunities. Industrial Validation, manufacturing architecture and factory of the future are some of the work packages that can provide stretch objectives for such growth. Key Responsibilities: Supporting the manufacturing area in its growth and rate increase. Carrying out improvement activities - data gathering and data analyses to understand impact and effort required. Support the Non-Conformance process - root cause analyses, implementation of effective corrective and preventative actions. Interface with the design authority during the product development phase to ensure optimised Design for Manufacture (DfM), and in the production phase for management of change implementation. This includes supporting the New Product Introduction team in creating/improving design rules for manufacturability of circuit cards. Ensure processes and equipment contribute to a safe working environment following both company processes and legal obligations, meeting internal quality requirements. Develop and maintain manufacturing methods, processes and equipment with a data-based approach, using methods such as SPC, to support a robust manufacturing system. Resolve issues and queries with the operations team on the shop floor. Perform and review PFMEAs. Develop tooling to aid the manufacturing process. Create and modify machine programmes for the assembly, manufacture or inspection of circuit cards.What we're looking for from you: An understanding and appreciation for quality control. Analytical mindset with the willingness to learn. Proficient in computer and internet use, including proficiency in commonly used applications such as Microsoft Office Suite & manufacturing systems such as: ERP systems, Manufacturing Execution System etc. Experience in Circuit Card Manufacturing or Design is beneficial. Knowledge of PCBA Processes and Technologies is beneficial. A proactive approach to process improvements. QUALIFICATIONS (Must Have) Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 Formal further education certificate to HND or equivalent in a relevant subjectALTERNATIVELY BEng/BSc in relevant Engineering/Technical DegreeOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDAUK), Instagram (MBDAUK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Role: Multi-Skilled Maintenance / Warehouse Technician Location: Bolton Type: Permanent Hours: Days, Monday-Friday Salary: Up to £32,000 per annum depending on experience HRGO Recruitment are seeking a Multi-Skilled Maintenance/Warehouse Technician to join a well-established manufacturing business. This hands-on role involves mechanical maintenance for 2 days a week and production and warehouse duties for 3 days a week. It's ideal for someone with strong mechanical skills who enjoys working with tools, machinery, and in a warehouse environment. The role: Maintenance & Fitting: General mechanical maintenance of production equipment Servicing welders, compressors, band saws, fabrication equipment Machine adjustments and basic servicing Maintain welding/grinding extraction systems General building maintenance Production & Warehouse: Assist with assembly, fabrication, and installation of components Drilling, tapping, soldering, and basic fabrication tasks Pack, palletise, label, and load products Goods in/out duties and stock organisationAdditional: Stock control and consumables management Support warehouse stock takes and PAT testing Health & safety compliance and monitoring racking systemsThe candidate: Experience with Pro Spot equipment would be highly advantageous Mechanical maintenance/engineering experience Experience with power tools, workshop equipment, and soldering Previous warehouse/production environment experience Practical, hands-on problem-solving approachFor further information, please contact Sophie on (phone number removed) or email (url removed)

World Class Defence Organisation based in Bolton is currently looking to recruit a General Operative (Microelectronics) on an initial 12 month contract. This position will specifically require experience with strong soldering experience. Any prior microelectronics experience would be great, i.e. soldering under a microscope. You will also need experience working within a manufacturing environment. Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph. Overtime hours (over 37 hours) are at normal hourly rate plus 50% Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Job Spec: The General Operator will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Carry out detailed standard assembly / manufacturing activities, undertaking all work to requisite procedures, quality standards, safety requirements and timescales. Very good Soldering experience is required Any experience of soldering under a microscope or in a similar environment would be great Any Looming or PCB experience would be great Previous background of working in a Production Technician or Assembly Operative role would be great Contribute to the efficient movement of work and information in the manufacturing area. Adhere in all activities to agreed standards and behaviours. Comply with all health and safety requirements. IPC 610 certified / trained preferred. Dexterity for fine work. Read and interpret layouts. Follow instructions. Willing to work flexible shift patterns. Attention to detail. Work on own with minimal supervision. Flexible. ESD training. Desirable skills: PC literate. Colophony health surveillance

We are currently recruiting for a MIG Welder to join one of our clients on a temporary to permanent contract based in Bolton. This is an excellent opportunity for an experienced MIG Welder with strong fabrication skills to support a busy workshop during a peak period. The role will involve a mixture of MIG welding and fabrication work within a fast paced manufacturing environment, producing bespoke metal components to a high standard. TIG welding experience would be advantageous but is not essential. Hours: 37.5 hours per week, Monday to Friday, 08:00 – 16:00. Weekend overtime may also be available and is paid at enhanced overtime rates. Responsibilities: • Carrying out MIG welding on a range of fabricated products and components., • Working with materials including Mild Steel, Stainless Steel, Structural Steel, and Aluminium., • Completing fabrication and assembly work using engineering drawings and measurements., • Preparing materials through cutting, grinding, and fitting processes before welding., • Using workshop machinery, hand tools, and power tools safely and effectively., • Supporting production targets while maintaining high fabrication standards., • Carrying out quality inspections on completed work to ensure accuracy and finish., • Assisting the wider workshop team with general fabrication duties as required., • Maintaining a safe and organised working area at all times Mig Welder Skills and Experience Required: • Previous experience working as a MIG Welder within a fabrication, Engineering or manufacturing environment, • Strong fabrication skills with the ability to produce accurate work to specification., • Ability to confidently read and interpret engineering drawings., • TIG welding experience would be beneficial although not essential., • Good level of numeracy for measurements, dimensions, and basic calculations., • Experience using fabrication equipment and general workshop machinery., • High attention to detail with strong quality checking abilities., • Reliable and hardworking attitude with a good understanding of workshop safety procedures. This MIG Welder vacancy is being advertised by S&D Trade Recruitment, operating as an employment business and acting as an employment agency. Please apply with your up to date CV and ask for Shelley in the office

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit a Mechanical Engineer subcontractor on an initial 12-month contract. Hourly Rate: £35ph Overtime Rate: Hours worked over 37 hours per week, are worked at the Overtime rate of time and a quarter. Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Mechanical Engineer Job Description: We are seeking a Mechanical Engineer to join our Calibration & Maintenance Team. The work is extremely varied, interesting and challenging. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across the company to resolve routine and non-routine tasks arising within the business. Responsibilities: The main aspects of the role will be as technical support for the metrology department at Bolton supporting COTS (commercial of the shelf) equipment and STTE (Special to type test equipment) calibration and maintenance. You will be required to assist production with technical queries on fixtures and tooling along with supporting CMM (Co-ordinate measuring machine) inspection work. You will be required to guide operators on best practice within the metrology department on day-to-day technical queries alongside looking at ways to improve process and measurement techniques within the department. You will also give technical support for mechanical calibration such as high/low pressure & temperature calibrations. Skillset/experience required: Minimum qualification: HNC in Mechanical Engineering. Experience and knowledge of calibrating torque tools to ISO 6789-2:2017 required. Good knowledge of Geometric Dimensioning & Tolerancing (GD&T) required. Experience and knowledge in dimensional calibration required Experience and knowledge of using and creating programs for coordinate measuring machine required. Good knowledge of temperature and pressure calibration desirable Able to deal with multiple issues, tasks and priorities concurrently

A fantastic opportunity to join our fast-paced but friendly and inclusive Manufacturing environment. Salary: £42,558 Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... The opportunity: This opportunity is for an Electrical Fitter to join the Manufacturing team supporting assembly and certification of a variety of electrical hardware builds, ranging from small fixtures through to complex missile systems, during all phases of the product lifecycle. You will be providing operations support to ensure programme targets are met to agreed time, cost and quality requirements. Ensuring that completed hardware builds are manufactured in accordance with drawing requirements and specifications; Maintaining a safe working environment in-line with 5S policies Always aiming to deliver in line with all time, cost and quality requirements Ensuring assembly unit production costs are met Maintaining, to the highest level, workmanship standards and product quality Ensuring the completion of all manufacturing documentation Working closely with fellow Operators, Engineering and Quality to overcome any technical challenges and offer feedback for continuous improvement activities You will be working with a large team of multi-disciplined operators in a fast-paced but friendly and inclusive Manufacturing environment. The team has a great mix of people, ranging from apprentices through to experienced skilled technicians, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) (NVQ - not required if you have achieved a L3 apprenticeship standard) Practiced in reading and understanding assembly drawings and planning instructions Fully conversant with all Manufacturing equipment, tools and measuring instruments Uses their initiative and can work without close supervision Goes 'the extra mile' to get work finished to a high standard Flexibility and adaptability Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDAUK), Instagram (MBDAUK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Are you an experienced Operations Manager within Engineering and would like to join a very well established business who are offering career progression to Director level. There is a salary of up to £68,000 plus a great benefits package and strong working culture. This is a new role within the business and the position is available to start within the next few weeks! To manage and maintain an efficient and effective Operations Department in line with Company strategy, including warehouse and manufacturing management and controls, distribution, stock and materials, staff management and labour efficiencies. Initially the role will be focussed on the production/engineering side of the business which will then lead to overseeing the warehouse/transport department. The Role: Production Planning and Management t Ensure effective planning, in-house manufacturing & distribution of products whilst balancing the advantages and disadvantages of in-house or external manufacture to ensure the most cost effective method is used to satisfy sales demand Provide cost effective and efficient planning of all labour resources and ensure optimum productivity and outputs Recruit and work closely with R&D/Quality/Purchasing staff to ensure smooth introduction of new products ranges and variants, plus improve methods of manufacture and assembly for all products. To liaise with Technical reference manufacturing and distribution improvements Constantly review ‘Make-Buy’ decisions for all manufacturing/assembly items with the Purchasing Department. TO work with Purchasing to ensure excellent supply chain service pricing and delivery Work closely with other Heads of Departments to ensure strong integrated and holistic processes and management flows. Contribute to budget planning, assimilation and operational management to ensure all activities operate within budget and seek continuous improvements in efficiencies across systems and processes to reduce operating costs wherever possible Engineering / Health and Safety & Quality Manage and maintain all Company VCA accreditation, maintenance and compliance Manage the engineering function to ensure that the company develops products as necessary Ensure production engineering complements the budget, drives increased efficiency and reduces the reliance on manual labour Ensure all Company VCA accreditation, maintenance and compliance is retained Maintain all procedures and documentation as set out in the accreditation procedures Ensure all procedures are compliant with the VCA accreditation To work towards the implementation of an ISO system of working Ensure that all Staff work in a safe manner and provide internal and external risk assessments. Ensure a safe and healthy environment free from potential hazard or risk Transportation, Distribution and Warehouse Management Ensure that all sales despatch targets are achieved and that customer delivery aspirations are met/exceeded Organise and distribute goods in the most cost effective and efficient manner Undertake frequent monitoring checks (daily) to ensure that all orders, stock and transportation are organised and scheduled in line with customer due dates. Manage and control cost effective and efficient use of external transport resources. Manage and maintain an accurate, effective and efficient stock inventory and control Develop and implement a standard of continuous improvement, maintaining a tightly managed model of 'goods in and goods out’ inspections to optimise quality standards Manage and control Storage Capacity as effectively and efficiently as possible Maintain tight cost controls across whole section About You: You will come from an Engineering background, ideally with an engineering qualification Proficient with ERP systems A self starter Experienced in managing team members Benefits: Working a 37 hour week Early finish on a Friday Pension 32 days holiday including bank holidays On site parking INDAB

Unity is advertising this opportunity on behalf of our client.All applications will be directed to our client.Are you an experienced cleaner looking for flexible work that fits around your life?.Whether you’re looking to fill gaps between other jobs or build a full-time income on your terms, this

Accommodation Cleaner - Hayling Island - Hayling Island, Hampshire .Job title – Accommodation Cleaner.Location – Meadow Bay Villages, Hayling Island Holiday Park, Hayling Island, PO11 0QS.Part Time, Seasonal, Mondays & Fridays with possible overtime.We are looking for part time accommodation

Unity is advertising this opportunity on behalf of our client.All applications will be directed to our client.Are you an experienced cleaner looking for flexible work that fits around your life?.Whether you’re looking to fill gaps between other jobs or build a full-time income on your terms, this

We cannot open the business without the floors been swept, the toilets being cleaned and the windows sparkling! Taking pride in your work and being passionate about your restaurant are a must.Treat yourself and your friends with 50% Zizzi & ASK Italian (drinks included).Never go hungry with free & h

Everyone who works at Lidl brings something unique to the table - but we also have a whole lot in common.We’re conscientious, determined, and take pride in our work.As a Cleaner here at Lidl, every sweep of your brush helps give our customers the in-store experience they deserve.From maintaining a

Description The role involves working for our Integral Hire (IHL) division assisting with general manual tasks, maintaining site cleanliness, transporting materials and equipment, and ensuring compliance with health & safety standards.Candidates should take the time to read all the elements of t

Paediatric Occupational Therapist - Band 6 / Band 7.Associate or Salaried Opportunities Available.Hampshire based - covering Farnborough, Basingstoke, Winchester & Southampton areas.Minimum 3 days per week (18 hours minimum).Hybrid / Community Based with Home Working.Band 6 Salary: £40,000 – £44

Endoscopy Decontamination Technician - NHS Insourcing Opportunity.Are you an Endoscopy Decontamination Technician looking for additional weekend work? Here at 18 Week Support, we have an amazing opportunity to work with multiple well-established NHS Trusts in the Dorset.This is an excellent opportun

We believe everyone deserves a smile they’ll love.In just a few years, we have expanded across multiple European markets, treated hundreds of thousands of patients, and built one of the fastest-growing HealthTech platforms in the region.At Impress, we are building the future of orthodontics — an

Specialist Neurodevelopmental Practitioner – ADHD & Autism Assessments (CYP).Hybrid – F2F assessments in Manchester, admin from home.Salary – £42,000 to £80,000 DOE.Profession: Nurse, Social Worker, Clinical Psych, OT & SaLT.Service Care Solutions are proud to be recruiting for a Specialist

Location Remote (UK) — must be within easy reach of North London for initial training .This is a role at the heart of how we look after our patients.You’ll be the first voice many of them hear, often .You’ll work closely with our physiotherapy team, scheduling visits across the UK, handlin

Working hours - full time or part time, evenings and weekends required.As the UK's leading private provider of laser eye, premium intraocular lens and cataract surgery, our expert Surgeons undertake more procedures collectively than any other national provider.For over 35 years, millions of patients

Advantage Medical Staffing is recruiting.Family Physicians / General Practitioners.Greater Toronto Area (GTA), Ontario, Canada.CAD $600,000 per year (£325,000).Strong admin and allied health support.Walk-in and family practice opportunities.Modern EMR systems and fully equipped clinics.An excellent

Locum Opportunity: Band 7 Hospital Pharmacist – West Midlands 🚨.One of my NHS clients in the West Midlands is urgently seeking an experienced.Immediate start – ongoing contract.Previous NHS hospital experience is essential.If you’re available and meet the criteria, I’d love to receive you

Dermatology Consultant – 2WW Clinics | Dorset 🌟.Help us reduce NHS waiting lists and deliver timely, compassionate care to patients across Dorset.We’re seeking experienced Dermatology Consultants and Specialty Doctors to support our busy Two-Week Wait (2WW) skin cancer clinics, working with a

Bring your expertise to Jersey’s highly regarded Multidisciplinary Pain Service as a Consultant Clinical Psychologist / Psychology Lead, combining professional autonomy and clinical leadership with the chance to make a tangible difference to people living with persistent pain.Please find our infor

Cheshire - Hybrid, 3 days on site.Up to £45,000 per annum + additional £2,500 FTE for days onsite, pro rata.Full time, Monday to Friday, 37.You must have previous experience as an Occupational Health Advisor to be considered for this role.This role will be a hybrid position, you will spend 3 days

UK Medical Lead – Weight Management / GLP-1.Part-Time | Fully Remote (UK Based) | £90–£120 per hour + Equity.We are partnering with an innovative UK digital healthcare provider to appoint a.This is a senior clinical leadership opportunity for a doctor with strong experience in.The successful c

UK General Practitioners Exciting Opportunity in New Zealand.If you have been considering a move, this is your opportunity to enjoy a better pace of life while practising high-quality, patient-centred care in the Hutt Valley, just outside Wellington.Why Wellington & the Hutt Valley?.Wellington offer

Clinical Psychologist – CAMHS Services.We are seeking an experienced and highly motivated Clinical Psychologist to support the delivery of high-acuity CAMHS, complex care, and IMHS community placements across a growing specialist service.This role will provide psychological leadership and therapeu

We are currently hiring multiple Specialist Consultants across the following areas: Pain Medicine, Psychiatry, Neurology, and Women’s Health.Contract Type: Contractor / Self-Employed.Pay Rate: Equivalent to £195 p/h.At Lyphe, our mission is to bring medical cannabis to those with unmet clinical n

Private Health Care Practitioner / Therapist.Acupuncturist, Reflexologist, Chiropodist, Podiatrist.Based at the historic and beautifully restored Old Forge in Toddington, we are a growing multidisciplinary healthcare clinic dedicated to providing care that feels personal, considered, and deeply reas

The purpose of this role is the most senior doctor (apart from the Department Chair and/or Section Head) who practices in a specific specialty and has oversight responsibility for his team of Consultants and junior doctors and manages other team members.The Senior Consultant is responsible for the c

Clinical excellence in assisted reproduction. Minimum 4 years of experience delivering IVF and assisted reproduction in a UK private or regulated fertility setting.

Sun Pharmaceutical Industries Ltd.Sun Pharma) is the fourth largest specialty generic pharmaceutical company in the world with global revenues of US$6 billion.Supported by more than 40 manufacturing facilities and more than 40.Over the last two decades, Sun Pharma has established itself as a leading

Consultant Ophthalmologist - Glaucoma NHS Insourcing Opportunity.Competitive rates paid into your Limited Company.Are you an Consultant Ophthalmologist looking for additional work? Here at 18 Week Support, we have an amazing opportunity to work with a well-established NHS Trusts in the Warwickshire

Highly attractive salary or fee structure, continual professional development, great working environment with a professional team.A bit about us - and why we need you!.We currently require an Aesthetic Doctor with accredited training to fulfil Aesthetic treatment sessions in our Thurrock clinic, pro

Nationwide | Remote when not in service | Competitive salary + car allowance.This is a role where you can truly shape the future of care.UK with learning disabilities, physical disabilities, autism, brain injuries and complex needs.We’re proud to be an award‑winning organisation (Health Investor

Consultant Gastroenterologist - NHS Insourcing Opportunity.Competitive rates paid into your Limited Company.Are you a Consultant Gastroenterologist looking for additional weekend work? Here at 18 Week Support, we have an amazing opportunity to work with multiple well-established NHS Trusts in the We

Remote/Hyrid Working Nurse Manager – Community Complex Care.Hybrid: 3 days community-based | 1 day from home | 1 day in office.UK Driving Licence & Own Car Required.Clinical Lead to support adults and children with complex healthcare needs in the community.This is a highly autonomous, clinically f

Advanced Pharmacist – Adult Medicine & Urgent Care (Band 8a).Kettering General Hospital | University Hospitals of Northamptonshire NHS Group.Start Date: As soon as possible.We are working with Kettering General Hospital to recruit an Advanced Pharmacist to join their Adult Medicine & Urgent Care d

Audiologist / Hearing Aid Dispenser – Private Domiciliary Company.Monday to Friday 09:00 – 17:30.Basic Salary £40,000 - £50,000 + Company Car and fuel covered.On target earnings: £60,000 - £90,000 Depending on Sales (Uncapped).Part time possible – please enquire.Available (Skilled Worker /

We believe our residents deserve choice, dignity, and independence.Our main focus is to create a friendly, safe, and warm environment for everyone in our homes.Tailored care plans and 24-hour personal support for each resident help us achieve this.We offer a wide variety of care options from short a