Trabajos production assembly en HalifaxCrear alertas

Electro-Mechanical TechnicianHalifax£15.77 per hour 38 hours per week | Monday-Friday (12:30 finish Friday)Our engineering client based in Halifax is looking to recruit a skilled Electro-Mechanical Technician to join their engineering team. This is an excellent opportunity for an experienced Electro-Mechanical Technician to work in a high-quality manufacturing environment building and calibrating precision instruments and equipment.As an Electro-Mechanical Technician, you will be responsible for assembling, testing and calibrating products to ensure the highest standards of quality are consistently achieved. The Electro-Mechanical Technician will work closely with internal departments to support production, quality standards and continuous improvement initiatives.Key Responsibilities • Build and assemble mechanical and electrical components to produce high-quality instruments., • Calibrate equipment and ensure all products meet strict quality standards and procedures., • Follow ISO quality processes and ensure measurement equipment is used correctly., • Complete documentation including quality plans, NCRs and system updates accurately., • Install and verify correct software revisions where required., • Work collaboratively with operations, planning, distribution and service teams., • Support continuous improvement activities within the department., • Maintain excellent housekeeping, health and safety, and working practices., • Apprentice training (or equivalent experience) in Mechanical or Electrical Engineering., • HNC level qualification or equivalent engineering experience., • Experience working in a manufacturing or engineering environment., • Strong electrical and mechanical assembly skills., • Ability to troubleshoot technical issues and work independently or as part of a team., • £15.77 per hour, • 38-hour working week, • Monday to Friday schedule, • Early finish at 12:30pm on Fridays

Job description Valve Assembler/Tester Brighouse, West Yorkshire, UK We are currently recruiting for Valve Assembler/Tester to work as part of our busy team in a fast paced, dynamic environment to assist in the assembly and testing of new and existing valve products to meet both industry and customer specifications. Key Responsibilities: Assemble and test valve components following work instructions. Maintain a safe and clean working environment. Carry out daily work assessments to make sure you are being as safe and efficient as possible. Contribute to team effort and ensure production requirements are met. Ensure that Health & Safety and Environmental standards are complied with. This list is not exhaustive. Skills Required: Experience of valve assembly Experience of valve testing Working in a team. Ability to be flexible within a role. Ability to read assembly drawings. Committed and hard working with a positive attitude. Good time management. Ability to react to differing workloads, some of which will be repetitive. Computer literate. Desirable Skills: Problem solving skills. Job Types: Full-time, Permanent Salary: £Attractive DOE Benefits: • Company pension, • On-site parking/ Free parking, • 25 Days paid holiday – plus all Bank holidays, • Company Health & Wellbeing scheme, • Half day finish Friday Schedule: • Monday to Thursday 0700-1545hrs (30 minute lunch), • Friday 0700-1230 (no lunch)

We are seeking a skilled and proactive Maintenance Technician to join our client for a fixed term of 3 months. The ideal candidate will play a key role in maintaining the safe, reliable, and efficient operation of their chemical manufacturing facility. This role involves mechanical maintenance, fault-finding, and supporting continuous improvement across production equipment such as mixers, pumps, and conveyors. THE ROLE: * Conduct Planned Preventive Maintenance (PPM): Perform maintenance on mechanical equipment, including mixers, pumps, valves, and gear boxes. * Respond to Breakdowns: Diagnose faults and complete repairs promptly to minimize downtime. * Overhaul Mechanical Components: Refurbish parts such as bearings, shafts, seals, and drive systems. * Assist with Equipment Installation: Support the installation, commissioning, and modification of plant equipment and production lines. * Support Continuous Improvement Initiatives: Enhance reliability, efficiency, and safety in operations. * Ensure Compliance: Adhere to health and safety regulations during maintenance activities. * Collaborate with the Engineering Team: Provide support as directed to ensure smooth business operations. CANDIDATE EXPERIENCE: * Proven experience in mechanical maintenance within chemical, manufacturing, or heavy industrial environments. * Competence in mechanical assembly. * Knowledge of rotating equipment, hydraulics, pneumatics, and mech...

Job Description Production Operative - Cleckheaton - £12.21 per hour - Full-time - Apply Now.Location: CleckheatonWorking Hours: Rotating Shifts Monday to Friday (06:30 - 14:00 and 14:30 - 22:00)Pay Rate: £12.21 p/h Check you match the skill requirements for this role, as well as associated experience, then apply with your CV below. About the RoleAre you reliable, hardworking, and ready to join a fast-paced environment where every day is different? We’re looking for Production Operatives to join our team and help keep things moving smoothly behind the scenes. You don’t need warehouse experience – just the right attitude, a willingness to learn, and a team-player mindset. If you’re ready to be part of a supportive workplace that values people from all walks of life, we’d love to hear from you! What You’ll Be Doing * • Stationed at a fast moving production line Operating machines that fill cartridges Labelling, packing and product box assembly Keeping the warehouse clean, safe and organised Working with your team to hit daily targets What We’re Looking ForWe welcome applications from people with different backgrounds and experiences. You don’t need specific qualifications – if you’re dependable and eager to get stuck in, you’re halfway there. You should be: * • Able to work on your feet and lift items (within safe manual handling limits) Comfortable in a warehouse environment A team player who communicates well Flexible and able to follow instructions Punctual, with a good work ethic What You’ll Get in Return * • Weekly pay & opportunities for overtime On-the-job training and development Opportunities to progress into permanent roles Staff discounts & reward schemes (where applicable) A friendly, inclusive team that celebrates diversity Safe and supportive working environment Excellent refreshment facilities Sound Like A Great Opportunity? xrnqpay Apply today!

Trainee Toolmaker (Apprenticeship Qualified) £16PH - £17PH + Company Benefits + Overtime + Days Based + 4 Day Working Week Huddersfield Are you an apprenticeship-qualified Toolmaker looking for a stable, long-term position, offering a Monday to Thursday working week and regular overtime opportunities to boost your earnings? This UK manufacturer founded in the 1980s, supplying high-quality tooling solutions to the plastic injection moulding and die casting industries, built on decades of engineering expertise, precision manufacturing, and a strong reputation for reliability and bespoke, customer-focused service trusted by automotive, electronics, construction and specialist engineering customers across the UK. In this role, you will be responsible for the bench fitting, assembly, stripping, adjustment and maintenance of precision injection mould tools using hand tools and measuring equipment. You'll build and fit new injection mould tooling, fault find and repair existing moulds, support tool trials through on-bench adjustments, and work closely with CNC machinists, EDM operators and production teams, Monday to Thursday. This role would suit an apprenticeship-qualified Toolmaker looking for a long term and stable position with plenty of overtime. The Role: • Design, build and bench fit precision injection mould tools and comp...

Can you ensure you get control of a shop floor to ensure products go out on time and at the right quality? Are you firm but fair to ensure prodcutivity from hourly paid staff, always focused on walking the floor to ensure what should be happening is happening? Do you understand an assembly focused production environment? This could be the role for you! We are seeking an experienced and driven Manufacturing Manager to lead the day-to-day operations of a fast-paced, assembly-focused manufacturing facility. This is a key leadership role responsible for ensuring production targets are achieved safely, efficiently, and to the highest quality standards. The ideal candidate is a hands-on operational leader with strong people management capability and a continuous-improvement mindset. Manufacturing Manager - Role and Responsibilities • Oversee all assembly manufacturing activities to ensure daily, weekly, and monthly production targets are met., • Manage and optimise workflow, capacity, resource allocation, and equipment utilisation., • Ensure adherence to production schedules while maintaining flexibility to manage changeovers and priority shifts., • Lead, motivate, and develop assembly team leaders, supervisors, and operators., • Set clear performance expectations and drive a positive, accountable, and inclusive culture., • Identify skills gaps and implement structured tra...

A healthcare solutions company located in Cleckheaton is seeking an Assembly Team Leader to manage the production assembly team. This position involves overseeing production workflows, reporting to the Production Supervisor, and implementing improvement initiatives. The ideal candidate will have exp

Electro-Mechanical Technician Halifax £15.77 per hour 38 hours per week | Monday-Friday (12:30 finish Friday) Our engineering client based in Halifax is looking to recruit a skilled Electro-Mechanical Technician to join their engineering team. This is an excellent opportunity for an experienced Electro-Mechanical Technician to work in a high-quality manufacturing environment building and calibrating precision instruments and equipment. As an Electro-Mechanical Technician, you will be responsible for assembling, testing and calibrating products to ensure the highest standards of quality are consistently achieved. The Electro-Mechanical Technician will work closely with internal departments to support production, quality standards and continuous improvement initiatives. Key Responsibilities Build and assemble mechanical and electrical components to produce high-quality instruments. Calibrate equipment and ensure all products meet strict quality standards and procedures. Follow ISO quality processes and ensure measurement equipment is used correctly. Complete documentation including quality plans, NCRs and system updates accurately. Install and verify correct software revisions where required. Work collaboratively with operations, planning, distribution and service teams. Support continuous improvement activities within the department. Maintain excellent housekeeping, health and safety, and working practices. Assist with stock control processes and accurate system bookings. The Candidate The successful Electro-Mechanical Technician will ideally have: Apprentice training (or equivalent experience) in Mechanical or Electrical Engineering. HNC level qualification or equivalent engineering experience. Experience working in a manufacturing or engineering environment. Strong electrical and mechanical assembly skills. Ability to troubleshoot technical issues and work independently or as part of a team. Good organisational skills and attention to detail. What's on Offer £15.77 per hour 38-hour working week Monday to Friday schedule Early finish at 12:30pm on Fridays Stable position within a well-established engineering environment This role would suit a motivated Electro-Mechanical Technician who takes pride in producing high-quality work and enjoys working within a collaborative engineering team. If you are an experienced Electro-Mechanical Technician looking for your next opportunity in Halifax, we would love to hear from you. HMIND INDHM

Senior Design Engineer – Valve Industry Location: Brighouse, West Yorkshire Salary: Up to £48,000 per annum (depending on experience) Employment Type: Full-time, Permanent Company Overview Our client is a well-established manufacturer within the valve and flow control industry, supplying high-integrity products to the energy, process, and industrial sectors. With continued investment in engineering capability and product development, an opportunity has arisen for a Senior Design Engineer to join the design and development team at their Brighouse facility. Role Overview Reporting to the Engineering Manager, the Senior Design Engineer will be responsible for the design and development of valve products and associated systems from concept through to production release. The role involves producing detailed engineering designs, performing analytical calculations, supporting validation activities, and ensuring compliance with applicable design codes and industry standards. Key Responsibilities Lead and manage the mechanical design of valve products, sub-assemblies, and associated components. Generate 3D CAD models, engineering drawings, and bills of materials using SolidWorks or Autodesk Inventor. Conduct stress, flow, and tolerance analyses, including FEA and CFD where required. Support prototype build, testing, and qualification processes, ensuring product performance meets specification. Ensure designs comply with relevant international standards such as API 6D, ASME B16.34, PED, and ATEX. Participate in design reviews and implement design-for-manufacture (DFM) and design-for-assembly (DFA) principles. Provide engineering support to production, quality, and procurement teams. Mentor junior engineers and contribute to the development of departmental best practices. Candidate Requirements Degree-qualified in Mechanical Engineering or a related discipline. Substantial experience in the design of valves, actuators, or pressure-containing equipment. Proficient in 3D CAD software (SolidWorks or Autodesk Inventor preferred). Strong knowledge of materials, sealing technologies, and manufacturing processes (machining, casting, forging, etc.). Experience with engineering calculations and relevant design codes (ASME, API, PED). Ability to manage multiple design projects to schedule and budget constraints. Excellent communication and technical documentation skills. Package and Benefits Competitive salary up to £48,000 (DOE) 25 days annual leave plus statutory holidays Company pension scheme Career development and professional training support Modern, well-equipped design and manufacturing facilities

Toolmaker (4 Day Working Week) £16PH - £17PH + Company Benefits + Overtime + Days Based + 4 Day Working Week Huddersfield Are you an Injection Mould Toolmaker keen to work in a close-knit team in a long-term, stable, day-based role where you can increase your earnings through regular overtime? This UK manufacturer founded in the 1980s, supplying high-quality tooling solutions to the plastic injection moulding and die casting industries, built on decades of engineering expertise, precision manufacturing, and a strong reputation for reliability and bespoke, customer-focused service trusted by automotive, electronics, construction and specialist engineering customers across the UK. In this role, you will be responsible for the bench fitting, assembly, stripping, adjustment and maintenance of precision injection mould tools using hand tools and measuring equipment. You'll build and fit new injection mould tooling, fault find and repair existing moulds, support tool trials through on-bench adjustments, and work closely with CNC machinists, EDM operators and production teams, Monday to Friday. This role would suit an experienced Injection Mould Toolmaker looking for a long term and stable position with plenty of overtime. The Role: Design, build and bench fit precision injection mould tools and components Strip, repair, modify and maintain existing tooling to tight tolerances Carry out hand fitting, spotting and adjustment to support tool trials Modify tooling and assist with new machinery builds as required Work closely with CNC, EDM and production teams Monday-Thursday 9.15 hour days with overtime available on Fridays The Person: Toolmaker within injection mould tooling Commutable to Huddersfield Reference: BBBH23919 Keywords: Engineer, Engineering, Manufacturing, Toolmaker, jigs, fixtures, industrial, precision, tooling, Huddersfield, Yorkshire, Halifax, Brighouse, Meltham If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Part-Time Bench Joiner Location: Sowerby Bridge Contract: Temporary Ongoing Hours: Up to 10 hours per week Monday - Friday (Flexibility on hours offered) Pay: £15 - £20 p/h depending on experience Are you a time-served joiner looking for reduced hours or an experienced joiner looking for additional hours alongside existing work? An opportunity has arisen for an experienced Bench Joiner to support a small workshop in Sowerby Bridge producing bespoke wooden components and furniture pieces. This is a flexible, part-time role within a traditional workshop environment, assisting with the manufacture and assembly of products using MDF, softwood and hardwood materials. Current work includes producing bespoke storage cubes, with additional projects involving custom furniture and prototype pieces. Key Responsibilities Manufacturing wooden components using MDF, Softwood and Hardwood Assembly and finishing of workshop-built pieces Working from measurements and basic specifications Maintaining consistency and quality across bespoke items Supporting small-batch production within the workshopRequirements: Time-Served Joiner or demonstrable experience in Bench Joinery Experience with bespoke joinery or interior installations Own hand tools Familiarity working with woodworking machinery such as table saws, planers or sanders Reliable, self-motivated and able to manage your own workload Safety bootsThis is an exciting ongoing opportunity with the potential with availability to work weekdays, evenings or even weekends. This role may particularly suit a semi-retired joiner or an experienced trades-person looking to supplement their workload. Please apply now

A leading, culture-first and family-owned manufacturing business which specialises in the design, manufacture, assembly and testing of highly complex components is seeking an experienced Senior Quality Engineer to join their SHEQ function. This Senior Quality Engineer position will take ownership of manufacturing performance, driving risk reduction and continuous improvement across designated production areas, while ensuring full compliance with AS9100 and ISO 9001. This is a permanent, days-based opportunity based in Huddersfield. Salary & Benefits: £45,000 - £50,000 (DOE) Permanent - days based, 38 hours per week 7:00am - 16:00 Monday to Thursday and 7:00am - 11:00am Friday (flexibility available around core hours) 33 days annual holiday entitlement (with the ability to buy or sell up to 3 days) Annual company bonus Company matched pension contributions up to 10% Private Medical Insurance + medical sundries cash plan (incl. PMI excess cover) Subsidised, on-site canteen Annual profit share (dependent on company performance) Death in Service and Private Medical Care Corporate-discount gym membership The successful Senior Quality Engineer will lead performance across manufacturing areas, taking responsibility for maintaining robust control documentation, supporting audits, and embedding a culture of continuous improvement. As a Senior Quality Engineer, you will: Take ownership of performance metrics within assigned manufacturing areas (FPY, scrap, rework, escapes, COPQ) Lead root cause and corrective action activities using structured methodologies (8D, 5-Why, Ishikawa) Maintain and approve Control Plans, PFMEAs, and process risk registers Support internal, customer, and third-party audits Drive continuous improvement initiatives aligned with wider business objectives Coach and support production leadership in applying risk-based thinking Contribute to high-criticality aerospace and space projects To be considered for this Senior Quality Engineer role, you will have: Proven experience within aerospace, automotive, medical device, defence, or similar high-regulated manufacturing environments HNC, HND, degree or equivalent in a technical or manufacturing discipline Strong working knowledge of ISO9001, with awareness of AS9100, ISO13485, and NADCAP Experience using problem-solving tools such as root cause analysis, data analysis, and continuous improvement methodologies A track record of implementing and improving management systems Desirable: Knowledge of AS9100, new product introduction, and analytical methodologies such as Six Sigma (Black Belt advantageous) This Senior Quality Engineer opportunity provides the chance to join a well-established organisation known for its strong culture, technical excellence, and long-term stability. Apply now for this Senior Quality Engineer position