Trabajos production assembly en HitchinCrear alertas

Goods Inwards / Incoming Quality Inspector (Stores & Manufacturing) Stevenage| Onsite | Defence ManufacturingWhy apply? An opportunity supporting a major UK defence programmeClearly defined role focused on goods inwards & stores inspection (not bench/final inspection)The opportunity As a trusted partner to the UK Ministry of Defence, our client is seeking an experienced Goods Inwards / Incoming Quality Inspector to join their established manufacturing site in Bolton. This role is critical to ensuring all incoming materials and components meet purchase order, contractual, and quality requirements before entering production. You will play a key part in protecting compliance, supporting manufacturing schedules, and maintaining the highest standards within a safety critical, regulated environment.What youll be doing Inspect and verify all incoming goods against purchase orders, delivery notes, and quality documentationFormally accept procured products in line with approved standards and contractual conditionsRead and interpret engineering and assembly drawings, including dimensional tolerances and machined featuresInspect components for damage, surface finish, paint defects, and first off requirements where applicableComplete, maintain, and update accurate inspection and quality records, ensuring full traceabilityValidate delivery paperwork and system entries to support audit and compliance requirementsMeet agreed inspection turnaround times to support manufacturing demandIdentify, segregate, and control non conforming material, raising and maintaining NCRs as requiredSupport product verification and approval activities, including audits and PCB inspection where applicableMaintain compliance with manufacturing, quality, and safety procedures while contributing to a safe, organised working environmentWhat were looking for Essential experience Proven goods inwards, incoming inspection, or stores inspection experience within a manufacturing or regulated environmentStrong understanding of inspection requirements for safety critical componentsExperience managing receipt, verification, traceability, and non conformance controlConfidence working with inspection documentation, delivery paperwork, and quality recordsPlease note: This role requires goods inwards / stores inspection experience. Final or bench mechanical inspection experience alone is not suitable.Qualifications (one of the following) Level 3 Electrical/Mechanical Engineering or Manufacturing Apprenticeship, orLevel 3 Electrical/Mechanical Engineering or Manufacturing qualification (e.g. NVQ, ONC, Diploma or equivalent).Qualifications must meet the required standard for the role.Additional skills Manual handling and ESD awarenessSAP experience is desirable but not essentialSecurity clearance British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team.About the site The Stevenage facility is one of the North Wests leading manufacturing sites, supporting defence programmes for over 25 years. The site offers: Onsite canteenFree parking, showers, and bike racksConvenient motorway accessWhat happens next? Once you apply, and if your application meets the selection criteria, a member of the talent acquisition team will contact you to arrange a structured screening call. This conversation will explore your experience and suitability for the role in more detail.Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team.More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air.Stevenage: This role is based at MBDAs headquarters in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop.TPBN1_UKTJ

CNC Machinist, Toolmaker (Injection Moulding) \n Stevenage \n Up to £45,000 DOE + Overtime + Days Only + Monday to Friday + Early Friday Finish + 23 Days Holiday + Enhanced Pension + New Facility + On-Site Parking + Flexible ScheduleAre you a Toolmaker looking for a new opportunity with a forward-thinking company offering excellent work/life balance, job security, and regular overtime? Are you looking to work in a modern, purpose-built facility with the latest moulding equipment, where you'll receive on-the-job training and opportunities to develop your career? This ISO 9001:2015 accredited company has been a trusted provider of manufacturing solutions for over fifty years. Specialising in bespoke injection moulding services, they operate from a new site launched in 2020 and have experienced strong growth in both turnover and team size. In this role, you will be responsible for the modification and repair of a range of injection moulding machines that produce high-quality components for clients across multiple industries. You'll be working closely with the production and quality teams to ensure output meets company and customer standards. If you're a skilled Toolmaker and you're looking for a stable and supportive workplace with long-term prospects, apply today.The Role: \n\n • Use of manual milling machines\n, • Use of lathes\n, • Use of surface and cylindrical grinders\n, • Use of manual and CNC spark eroders\n, • Use of CNC wire eroder\n, • Modification & repair of Injection Mould Tools\n, • Manufacture and fitting of new injection mould tools\n, • Using hand tools such as files, hacksaws and grinders\n\n The Person: \n\n • Experience in Toolmaking, and high precision machining, milling, grinding and fitting\n, • Understand and have experience of fitting and assembly of complex tools including their repair\n\n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV Keywords: Toolmaker, Injection Moulding, Machine, Operator, Setter, Plastics, Manufacturing, Production, Stevenage, Hertfordshire We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this job, you accept the T&Cs, Privacy Policy, and Disclaimers which can be found on our website. \n Ref: 26360

Sheet Metal WorkerStevenageWe are currently recruiting for an experienced Sheet Metal Worker to join a well-established engineering client based in Stevenage.This is a fantastic opportunity offering long-term, stable work with excellent overtime and shift flexibility.Hours:50–55 hours available per weekDay or Night shifts availablePay Rate:£16.00 – £22.00 per hour DOEBenefits:Overtime paid at T+1/2Statutory pension scheme contributions in place22 days holiday + 3 additional daysRegular, consistent working hours availableKey Responsibilities:Fabrication and assembly of sheet metal componentsReading and working from engineering drawingsCutting, bending, forming, and finishing metal partsOperating a range of workshop machinery and toolsEnsuring all work meets required quality and safety standardsRequirements:Previous experience as a Sheet Metal Worker in an engineering or manufacturing environmentAbility to read technical drawingsStrong attention to detail and quality workmanshipReliable and flexible to meet production demandsTo apply please contact:Michael O'Hare01462 670666#INDLEITPBN1_UKTJ

\n \n Interconnects Design Engineer - Test Equipment required for long term contract based in Stevenage (preferred) or Bolton \n \n Individuals will need to have demonstrable experience in cable/harness/interconnects design, using relevant design packages such as Visio and HarnWare. The ideal candidate will have: \n\n • A minimum 2 years' experience in the use of Visio and related products (Harnware).\n, • A proven ability to define, deploy, and refine processes and best practices within Visio and Harnware. - including; electrical topology, wiring schematics and 2D manufacturing drawing processes and standards.\n, • Thorough understanding of product data management and change management within Windchill or similar.\n, • The ability to design cable assemblies based upon electrical constraints such as current, screening, signal types, volt drop, EMC and environmental requirements.\n, • An appreciation of cable assembly production/process engineering.\n\n Due to the nature of our work, experience of military Defence Standards and a working knowledge of D38999 connectors in support of cable harness manufacture is highly desirable. \n\n • Ideally Degree/HND/HNC qualified plus significant experience in Interconnects/Harness Design and Development.\n, • The ability to lead interconnects/harness design work packages and have experience of working within a multi-disciplinary team with the awareness and understanding of the challenges that this may bring.\n\n\n, • Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation.\n\n\n, • Strong communication skills, both written and verbal with the ability to influence and negotiate with partners across the business.\n, • Experience of supplier engagement and development across internal and external multi-disciplinary teams.\n, • The awareness and understanding of cultural differences with the ability to adapt accordingly.\n\n \n \n \n Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. \n Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. \n By applying for this role your details will be submitted to Modis International Ltd and/ or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website. \n

Manufacturing Technician \n Henlow \n £41,500 to £43,000 depending on experience \n Onsite - 5 days per week \n \n Are you a qualified Manufacturing Technician with a background in mechanical or electrical assembly? Do you take pride in producing high-quality products to exacting engineering standards? \n \n This is an excellent opportunity to join a leading defence organisation manufacturing advanced, precision-engineered products used within highly complex systems. You'll become part of an experienced production team where quality, workmanship and continuous improvement are at the heart of everything you do. \n \n If you're looking for a hands-on engineering role offering excellent long-term career prospects, this could be the perfect next step. \n \n The Role \n You'll be responsible for assembling, repairing and modifying precision-engineered products while ensuring every build meets strict engineering and quality standards. Working with specialist equipment and technical documentation, you'll contribute to the manufacture of complex products within a controlled production environment. \n You'll also play an important role in maintaining product quality, supporting audits and sharing best practice with colleagues. \n \n Key Responsibilities \n • Assemble, repair and modify mechanical and electromechanical products to engineering specifications \n • Carry out manufacturing activities using specialist tools, equipment and measuring instruments \n • Complete build documentation and production records accurately \n • Ensure all products meet quality and certification requirements before release \n • Maintain high standards of workmanship throughout the manufacturing process \n • Support inspection activities and product audits where required \n • Follow manufacturing procedures, quality standards and safe working practices \n • Contribute to continuous improvement and share technical knowledge within the team \n \n Skills & Experience \n • Completed a Level 3 Mechanical, Electrical or Manufacturing Engineering apprenticeship \n • Hold relevant Level 3 engineering qualifications such as NVQ, Diploma or ONC \n • Experience working within a manufacturing, production or assembly environment \n • Ability to interpret engineering drawings and manufacturing documentation \n • Experience using precision hand tools and measuring equipment \n • Strong attention to detail and commitment to producing high-quality work \n • Good organisational skills with the ability to work effectively within a team \n • Flexible approach and willingness to support a variety of manufacturing activities \n \n What's on Offer \n • Salary of £41,500 to £43,000 depending on experience \n • Onsite working in Henlow \n • Company bonus of up to £2,500 \n • Pension contributions of up to 14% \n • Paid overtime opportunities \n • Up to 15 additional Flexi Leave days \n • Enhanced parental leave package \n • Excellent onsite facilities including subsidised meals and free parking \n • Long-term career development within a world-class engineering and manufacturing environment \n \n Please note: Due to the nature of the work, applicants must be British Citizens or Dual UK Nationals with British citizenship and will be required to undergo security clearance checks. \n \n For further information feel free to reach me at 02895213213, or simply apply! Reference: AMC/RKI

Toolmaker (Injection Moulding)Stevenage \n Up to £45,000 DOE + Overtime + Days Only + Monday to Friday + Early Friday Finish + 23 Days Holiday + Enhanced Pension + New Facility + On-Site Parking + Flexible ScheduleAre you a Toolmaker looking for a new opportunity with a forward-thinking company offering excellent work/life balance, job security, and regular overtime? Are you looking to work in a modern, purpose-built facility with the latest moulding equipment, where you'll receive on-the-job training and opportunities to develop your career? This ISO 9001:2015 accredited company has been a trusted provider of manufacturing solutions for over fifty years. Specialising in bespoke injection moulding services, they operate from a new site launched in 2020 and have experienced strong growth in both turnover and team size. In this role, you will be responsible for the modification and repair of a range of injection moulding machines that produce high-quality components for clients across multiple industries. You'll be working closely with the production and quality teams to ensure output meets company and customer standards. If you're a skilled Toolmaker and you're looking for a stable and supportive workplace with long-term prospects, apply today.The Role: \n\n • Use of manual milling machines\n, • Use of lathes\n, • Use of surface and cylindrical grinders\n, • Use of manual and CNC spark eroders\n, • Use of CNC wire eroder\n, • Modification & repair of Injection Mould Tools\n, • Manufacture and fitting of new injection mould tools\n, • Using hand tools such as files, hacksaws and grinders\n\n The Person: \n\n • Experience in Toolmaking, and high precision machining, milling, grinding and fitting\n, • Understand and have experience of fitting and assembly of complex tools including their repair\n\n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV Keywords: Toolmaker, Injection Moulding, Machine, Operator, Setter, Plastics, Manufacturing, Production, Stevenage, Hertfordshire We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this job, you accept the T&Cs, Privacy Policy, and Disclaimers which can be found on our website. \n Ref: 26360

I'm currently supporting a client based in Letchworth Garden City, who are looking for an experienced Studio Manager. You will be working on the pre-print artwork production efforts, delivering to customers the companies core values of quality, service and speed.My client are specialists in high quality large format printing, POS solutions and displays.Previous experience in large format print production and manufacturing is essential. You'll have a 'can-do' attitude and a keen eye for detail to ensure every product is produced to our highest standards, even when working to tight deadlines.The Role:All aspects of pre-press print production - ranging from simplistic small and large format print to complex manufacturing build projectsTaking customer briefs and converting briefs into detailed technical drawingsProducing assembly drawings, calculating yield of materials, assessing proposed production methods and identifying any potential issues with material etcCustomer liaisonManaging the Art-working team to prioritise workload, review and sign-off artwork before ProductionDesigning and creating products using Adobe suite - including illustrator and photoshop for customer requirements and specifications - essentialCommunicating and liaising with the Production Team to ensure the products are produced to the highest possible standard and qualityAssisting Production Team with RIP supportAssisting Production Team with print finishingAbout you:Large format and manufacturing pre-press print productionTeam managment experienceGood multi-taskerGood team playerSalary is negotiable DOEWorking hours, 8am-5.30pm Monday - FridayTPBN1_UKTJ

Live Build Manufacturing Technician | Defence Manufacturing | Level 3 Apprenticeship Required?? Bolton | ?? £22.12 PAYE / £29.70 Umbrella | ? 37 Hours | ?? 12-Month Contingent AssignmentJoin a leading defence manufacturer supporting the assembly, inspection and testing of advanced engineering products used on critical defence programmes. This is a hands-on role within a highly skilled manufacturing environment offering long-term career prospects.Key ResponsibilitiesAssemble, inspect and certify products to engineering standards.Complete manufacturing documentation and data packs.Use tools, gauges and measuring equipment.Support production, repair and modification activities.Work from engineering drawings and manufacturing instructions.Ensure compliance with quality, safety and workmanship standards.Essential QualificationsEither:Electrical/Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 StandardorElectrical/Mechanical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.)andElectrical/Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ)*Not required if a L3 apprenticeship standard has been achievedEssential ExperienceManufacturing, Production or Assembly Technician backgroundMechanical or Electro-Mechanical AssemblyEngineering Production EnvironmentESD Awareness/TrainingWhy Apply?? Competitive rates? Long-term contract? Potential permanent opportunity? Modern defence manufacturing environment? Training and career development opportunitiesApply now to learn more about this opportunity.What happens now?Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application.Security Clearance : British Citizen or a Dual UK national with British citizenshipRestrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team.More about the role:For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air.This role is based near our client's headquarters in Stevenage, a key site for missile operations with excellent transportation links.TPBN1_UKTJ

Manufacturing Engineer Electro-Mechanical Assembly & IntegrationDefence Manufacturing | StevenageRate: £32£35 per hour (Umbrella available)Contract: 12 MonthsHours: 37 hours per week, Full Time OnsitePotential for Contract Extension or Permanent OpportunityOur client, a leading UK defence organisation, is seeking an experienced Manufacturing Engineer to support Assembly & Integration activities within a complex manufacturing environment.Working on advanced electro-mechanical products, you'll be responsible for developing manufacturing processes, supporting production activities, resolving technical issues and ensuring efficient, compliant manufacturing operations.Key ResponsibilitiesCreate and maintain manufacturing build instructions and process documentationDesign, commission and validate manufacturing toolingSupport industrial validation activities including FMEA and FAIInvestigate and resolve manufacturing and production issuesManage route card updates and rework activitiesSupport configuration control and implementation of engineering changesAssist with non-conformance investigations and corrective actions using SAPWork closely with production, quality and design engineering teamsEssential RequirementsQualification Requirements:Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard)ANDElectrical or Mechanical Engineering / Manufacturing Level 4 academic qualification (HNC, diploma, etc.)ANDElectrical or Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achievedORDegree in a relevant Engineering subject.Additional Skills: Experience within a manufacturing engineering environmentAbility to interpret engineering drawings and technical documentationExperience creating manufacturing processes, work instructions or assembly documentationStrong communication and stakeholder engagement skillsDesirable Experience Electro-mechanical assembly and integrationComplex product manufacturingFMEA and FAI activitiesSAPESD awarenessDefence, Aerospace, Automotive, Rail or other regulated industriesWhat happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application.Security Clearance : British Citizen or a Dual UK national with British citizenshipRestrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team.TPBN1_UKTJ

Hybrid working – 2 – 3 days on site (further travel to Stevenage required if not based there)Inside IR35 - £50 per hour umbrella6 month contract initially – open to extensionOverview of Department :A leading defence client has a fantastic opportunity for an Interconnects Design Engineer to work within our growing Interconnects team designing bespoke electrical interconnects / cables suitable for the transmission of power, signal and data within and between subsystems in our products, developing and designing Test Equipment solutions for the next generation of weapons.Responsibilities:To do this you will need to interpret sub-system requirements and, from these, generate electrical schematics and cable design definitions on Microsoft Visio & HarnWare work packages. You will need to be able to carry out investigations into a full range of cable problems and issues; developing and preparing solutions, either individually or as a member of a project team. The role also includes support to manufacturing in order to resolve any manufacturing issues, as well as supporting functional and environmental product trials.This role provides a wide scope of tasks and a unique opportunity to broaden technically within a growing company and high capability design teams. Exposure to complex and technologically advanced projects and products provides a stimulating experience.Working with highly talented and motivated engineers, in a friendly and supportive environment, provides one of the best environments to achieve a real feeling of success.Skillset / Experience required:Individuals will need to have demonstrable experience in cable / harness / interconnects design, using relevant design packages such as Visio and HarnWare. The ideal candidate will have:A minimum 2 years' experience in the use of Visio and related products (Harnware).A proven ability to define, deploy, and refine processes and best practices within Visio and Harnware. – including; electrical topology, wiring schematics and 2D manufacturing drawing processes and standards.Thorough understanding of product data management and change management within Windchill or similar.The ability to design cable assemblies based upon electrical constraints such as current, screening, signal types, volt drop, EMC and environmental requirements.An appreciation of cable assembly production/process engineering.Due to the nature of our work, experience of military Defence Standards and a working knowledge of D38999 connectors in support of cable harness manufacture is highly desirable.Ideally Degree/HND/HNC qualified plus significant experience in Interconnects/Harness Design and Development.The ability to lead interconnects/harness design work packages and have experience of working within a multi-disciplinary team with the awareness and understanding of the challenges that this may bring.Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation.Strong communication skills, both written and verbal with the ability to influence and negotiate with partners across the business.Experience of supplier engagement and development across internal and external multi-disciplinary teams.TPBN1_UKTJ

Were working with a leading defence programme in Stevenage looking for a Manufacturing Engineer to support assembly and integration across electronic and electro-mechanical systems. This role sits within a fast-paced production environment, supporting builds from sub-assembly level through to full system integration.What youll be doing: Supporting electronic and electro-mechanical assembly builds (CCA through to system level)Translating engineering drawings into clear manufacturing instructionsResolving production and process issues on the shop floorSupporting FMEA, FAI and validation activitiesUpdating build processes, tooling and route cardsWorking closely with production, quality and engineering teamsWhat theyre looking for: You must meet one of the following qualification pathways: Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard)AND Electrical or Mechanical Engineering / Manufacturing Level 4 academic qualification (HNC, diploma, etc.)AND Electrical or Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ)Not required if a L3 apprenticeship standard has been achieved OR Degree in a relevant Engineering subject.These qualifications must meet the required standard to be considered for the role.Additional Skill Requirements: Knowledge to interpret design drawings to produce manufacturing build instructions for skilled and semi-skilled operatorsExperience in Electronic Sub Assembly manufacture through to System level builds and expertise and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation SystemsExcellent interpersonal and communication skills with the ability to work in a diverse team and the ability to read, analyse and interpret documents for accuracy and compliance with CodeEffective collaboration, customer understanding, and prompt response are crucialUnderstand and work with Company Processes and ProceduresIt is highly essential to have Electrostatic Discharge (ESD) training and SAP experienceWhat happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application.Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team.More about the role For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air.This role is based at our client's headquarters in Stevenage, a key location for missile operations. The site offers excellent transportation links, an onsite gym, and a coffee shop.TPBN1_UKTJ

Bloom & Wild is re-inventing the $60B global flower industry. Over a billion flower exchanges take place every year and industry satisfaction levels are low. Driven by our vision of creating the destination for making life a little more thoughtful and beautiful, we do things differently. From inventing letterbox flowers to founding The Thoughtful Marketing Movement. And we’ve seen impressive traction to date - we are Europe’s largest direct to consumer flower company. In January 2021 we announced our £75 million Series D funding round, led by General Catalyst (backers of Airbnb and Deliveroo), alongside other top tier investors including Index Ventures (investors in Wise and Glossier). We are home to a family of 3 strong brands, Bloom & Wild, bloomon and Bergamotte, having acquired bloomon in April 2021 and Bergamotte in July 2021. Together, we are active in 8 countries. We were named one of the 5 fastest growing tech companies in Europe and are alumni of Tech Nation’s Future Fifty. We were also one of the Sunday Times Top 100 Small Companies to Work For 2020. We really care about creating a diverse and inclusive team and we welcome people from all backgrounds, with different perspectives, ideas and experiences to work with us. In our team, everyone has the freedom to give their opinion, grow in their career and be part of a genuinely caring and inclusive team. Tech Team @ Bloom & WildOur Technology team sits at the heart of our business, building and maintaining the solutions that power e-commerce, production, and fulfillment. Our platform uses technologies including Ruby and Rails and Python/React, backed by PostgreSQL, Fargate/ECS on AWS, and Cloud Run on GCP. It exposes APIs that are used by our multi-brand Angular webapp and our native iOS and Android mobile apps. We’re also looking at developing new domain-driven services & microservices where applicable. Our Product Engineering team is organised into cross functional squads, each responsible for a business and architectural domain, supported by Platform and Data Engineering. You’ll join the Range squad, a cross-functional team within our Ops-Tech group. We focus on the internal systems that power range representation, product allocation, and stock management — a core domain of our business that directly influences what our customers see and receive. Our work connects closely with many other squads across Bloom & Wild, as we support the smooth flow of products from planning through to delivery. Most of our team is based in the UK and works in a flexible model, with choice in how often they travel to the office. Our squads meet all in person at least once per quarter in order to maintain connections, collaborate on larger projects and have fun together. You can read lots more about our technology stack and our culture over on our tech blog - _. 💻 What you’ll be doing…As a mid-level engineer in our Range squad, you’ll help build and maintain the internal tools that power our warehouse operations — from bouquet assembly to order fulfilment across multiple countries. • Working closely with our product manager, engineers, and stakeholders to understand real-world needs and translate them into working software., • Building and improving our internal tools using Ruby on Rails and related technologies., • Making iterative improvements to our monolith while contributing to the development of new features to support our rapidly expanding curated range of products., • Writing clear, tested, secure, maintainable code and participating in code reviews to ensure high-quality solutions., • Exploring new ideas and opportunities to improve our monolith and workflows., • Helping to shape our technical decisions by sharing your ideas and contributing to discussions about architecture, tooling, and best practices., • Contributing to technical discussions and helping ensure our solutions align with our technical strategy and business goals., • Collaborating with your squad to deliver work in small, valuable increments — using agile practices and modern tooling., • Monitoring, debugging and improving the performance of our systems with observability tools., • You are a Ruby developer (2+ years of experience) with good knowledge of Ruby on Rails in a production environment and are keen to keep growing your expertise., • You have experience working with RESTful APIs, version control tools such as GitHub, and testing tools like RSpec., • You’re curious about how things work — whether it’s diving into a new tool, exploring performance improvements, or figuring out how real-world problems translate into code., • You want to work in a kind, inclusive, and supportive environment where people care about their work and each other., • You have experience working in a fast-growing (preferably consumer-facing) startup / scaleup., • You have experience of distributed service architectures, including how best to test and release them, and how to ensure system stability when making changes independent of other services.Why Bloom & Wild?To care wildly for our customers, first we care wildly for our teams. We work hard to craft a culture of thoughtfulness and care, where there is a strong sense of inclusion and belonging, enabling all of our people to thrive and be successful each day. 🌻Work that works for you - Flexible working : our core hours are 10-4, but outside of these hours you can start or finish your day when works best for you- Work Abroad for up to 30 days each year - Share in our success with a choice to take equity options from day 1- Enhanced family leave policy and a workplace nursery scheme- 1 day per year to volunteer on a project that’s close to your heart 🌴 Time off- 25 days’ holiday + your birthday and bank holidays each year- Option to buy an extra 5 days’ holiday each year - Flexible bank holidays - trade a bank holiday for another day that fits your beliefs, values and celebration calendar 🌱 Health & Wellbeing- Health cash plan through Simplyhealth- Mental health support through Open Up, including access to online therapy sessions- Allies and champions groups- Mental Health First Aiders and awareness training for our managers - In person or virtual yoga every week- Cycle to work scheme- Electric car scheme- Our office kitchen is stocked with drinks and snacks to keep you going- Financial wellbeing support through Bippit- Workplace pension contributions 🌳 Growth & Development- A flexible training framework for every stage of your career development through our Bloom & Learn programme- Access to the Goodhabitz learning platform- Mentee and mentor opportunities with our external partners, such as The Women's Association and Future Founders- Internal & external Speaker Sessions on a variety of different inspirational topics 💐 Moments that matter- Social & wellbeing monthly calendar- Summer and End of Year events, team lunches and post-peak celebrations- Irresistible discounts on our products, blooms & subscriptions! SponsorshipWe're proud to hold an A-rated sponsor license, so we can assign certificates of sponsorship. This means we can support applications from anywhere as long as the job is deemed suitable under the points based system. 🫱‍🫲 Getting hired We’ll do everything we can to make sure your interview experience with us is a good one. It’s a 2-way process, and we’re keen to answer all of the questions you may have, so that you can be sure (and excited!) that we’ll be the right place for you. If your application is successful you can expect: • The majority of our A chat with Leroy, our Talent Consultant for Tech - to discuss our role and learn a bit more about your skills and background and how we might match your career & development goals.- An interview with Tonci, our Engineering Manager to get into more of the detail.- A chance to show us how you work through a technical challenge, which can be a live paired coding/whiteboard session.A final chat with our CPTO or VP of Engineering. We believe in leading change for good, so do let us know if there’s anything we can do to support your application process. Also, if you have any feedback, please help us to improve our candidate experience by sharing (anonymously) _.

CNC Machinist, Toolmaker (Injection Moulding) Remember to check your CV before applying Also, ensure you read through all the requirements related to this role. Stevenage Up to £45,000 DOE + Overtime + Days Only + Monday to Friday + Early Friday Finish + 23 Days Holiday + Enhanced Pension + New Facility + On-Site Parking + Flexible Schedule Are you a Toolmaker looking for a new opportunity with a forward-thinking company offering excellent work/life balance, job security, and regular overtime? Are you looking to work in a modern, purpose-built facility with the latest moulding equipment, where you'll receive on-the-job training and opportunities to develop your career? This ISO 9001:2015 accredited company has been a trusted provider of manufacturing solutions for over fifty years. Specialising in bespoke injection moulding services, they operate from a new site launched in 2020 and have experienced strong growth in both turnover and team size. In this role, you will be responsible for the modification and repair of a range of injection moulding machines that produce high-quality components for clients across multiple industries. You'll be working closely with the production and quality teams to ensure output meets company and customer standards. If you're a skilled Toolmaker and you're looking for a stable and supportive workplace with long-term prospects, apply today. The Role: Use of manual milling machines Use of lathes Use of surface and cylindrical grinders Use of manual and CNC spark eroders Use of CNC wire eroder Modification & repair of Injection Mould Tools Manufacture and fitting of new injection mould tools Using hand tools such as files, hacksaws and grinders The Person: Experience in Toolmaking, and high precision machining, milling, grinding and fitting Understand and have experience of fitting and assembly of complex tools including their repair If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV Keywords: Toolmaker, Injection Moulding, Machine, Operator, Setter, Plastics, Manufacturing, Production, Stevenage, Hertfordshire We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. xwwtmva By applying for this job, you accept the T&Cs, Privacy Policy, and Disclaimers which can be found on our website. Ref: 26360

Toolmaker ( Injection Moulding ) Stevenage Up to £45,000 DOE + Overtime + Days Only + Monday to Friday + Early Friday Finish + 23 Days Holiday + Enhanced Pension + New Facility + On-Site Parking + Flexible Schedule Are you a Toolmaker looking for a new opportunity with a forward-thinking company offering excellent work/life balance, job security, and regular overtime? Are you looking to work in a modern, purpose-built facility with the latest moulding equipment, where you'll receive on-the-job training and opportunities to develop your career? This ISO 9001:2015 accredited company has been a trusted provider of manufacturing solutions for over fifty years. Specialising in bespoke injection moulding services, they operate from a new site launched in 2020 and have experienced strong growth in both turnover and team size. In this role, you will be responsible for the modification and repair of a range of injection moulding machines that produce high-quality components for clients across multiple industries. You'll be working closely with the production and quality teams to ensure output meets company and customer standards. If you're a skilled Toolmaker and you're looking for a stable and supportive workplace with long-term prospects, apply today. The Role: Use of manual milling machines Use of lathes Use of surface and cylindrical grinders Use of manual and CNC spark eroders Use of CNC wire eroder Modification & repair of Injection Mould Tools Manufacture and fitting of new injection mould tools Using hand tools such as files, hacksaws and grinders The Person: Experience in Toolmaking, and high precision machining, milling, grinding and fitting Understand and have experience of fitting and assembly of complex tools including their repair If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV Keywords: Toolmaker, Injection Moulding, Machine, Operator, Setter, Plastics, Manufacturing, Production, Stevenage, Hertfordshire We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this job, you accept the T&Cs, Privacy Policy, and Disclaimers which can be found on our website. Ref: 26360 TPBN1_UKTJ

Jark Stevenage are currently looking for a INJECTION MOULD TOOLMAKER for a successful company in Stevenage. Manufacture and modification of Injection mould tools in a modern well equipped toolroom, with Hurco machining centres, Sodick Wire eroders, Sodick Spark eroders, Jones & Shipman surface grinders, in house design using Pro Engineer and CAM programming using Powermill Main Duties & Responsibilities Use of manual milling machines Use of lathes Use of surface and cylindrical grinders Use of manual and CNC spark eroders Use of CNC wire eroder Modification & Repair of Injection Mould Tools Manufacture and fitting of new injection mould tools Using hand tools such as files, hacksaws and grinders Experience in general toolmaking, milling, grinding and fitting Wiring of Hot runner systems and fault finding To be considered for the role you must have; Experience in injection mould toolmaking, and high precision machining, milling, grinding and fitting. Understand and have experience of fitting and assembly of complex mould tools including their repair Have the ability to work to tight time scales without compromising quality and safety Maintenance, repair and modification on Injection Mould Tools Preparing new mould Tools for Production Candidate to have the ability to communicate well and be part of a team in a small business Full time Benefits - Company pension Flexible schedule On -site parking 23 days holiday plus bank holidays Schedule Monday to Friday 41.5 hours per week Overtime available Please send your CV into TPBN1_UKTJ

Our client has an opportunity for an Interconnects Design Engineer to join them on a contract basis for 6 months with possible extension. You will be designing bespoke electrical interconnects/cables suitable for the transmission of power, signal and data within and between subsystems in the products, developing and designing Test Equipment solutions for the next generation of weapons. Role: Interconnects Design Engineer - Test Equipment Location: Stevenage is preferable however will also consider Bolton. Fully Onsite Hours: 37 per week Clearance: BPSS to start, SC to follow Hourly Rate: £50 UMB What you'll be doing: Interpret sub-system requirements and develop electrical cable designs to meet technical specifications. Produce electrical schematics using Microsoft Visio. Create and maintain cable design definitions and documentation using HarnWare. Investigate and resolve a wide range of cable design and installation issues, developing effective engineering solutions. Work independently and collaboratively within project teams to deliver design solutions. Provide technical support to manufacturing teams, resolving production and assembly-related issues. Support functional testing and environmental product trials, assisting with product validation and performance verification. Prepare and maintain accurate engineering documentation throughout the design lifecycle. Collaborate with multidisciplinary engineering teams to ensure designs meet project, quality and customer requirements. Contribute to the successful delivery of complex and technically advanced engineering projects. Identify opportunities for design improvements and support continuous improvement initiatives. Ensure all work is completed in accordance with engineering standards, processes and project timescales.Requirements: Individuals will need to have demonstrable experience in cable/harness/interconnects design, using relevant design packages such as Visio and HarnWare. The ideal candidate will have: A minimum 2 years' experience in the use of Visio and related products (Harnware). A proven ability to define, deploy, and refine processes and best practices within Visio and Harnware. - including; electrical topology, wiring schematics and 2D manufacturing drawing processes and standards. Ideally Degree/HND/HNC qualified plus significant experience in Interconnects/Harness Design and Development. Thorough understanding of product data management and change management within Windchill or similar. The ability to design cable assemblies based upon electrical constraints such as current, screening, signal types, volt drop, EMC and environmental requirements. An appreciation of cable assembly production/process engineering. If you are interested in applying for this position and you meet the requirements, please apply! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Interconnects Design Engineer Location: Stevenage (2-3 days per week onsite; could be higher initially) Duration: 6 months Rate: £50 p/h Umbrella IR35: Inside Clearance: SC (BPSS to start) Overview Fantastic opportunity for an Interconnects Design Engineer to work within a growing Interconnects team designing bespoke electrical interconnects/cables suitable for the transmission of power, signal and data within and between subsystems in complex products. You'll interpret sub-system requirements and generate electrical schematics and cable design definitions (Microsoft Visio & HarnWare work packages). The role also includes investigating cable issues, developing solutions, supporting manufacturing with build issues, and supporting functional and environmental product trials. Responsibilities: • Interpret sub-system requirements and generate electrical schematics and cable design definitions (Visio & HarnWare work packages) Investigate a full range of cable problems/issues and develop solutions (individually or within a project team) Support manufacturing to resolve build/manufacturing issues Support functional and environmental product trials Contribute within a multi-disciplinary team and support delivery of technically advanced projects/products Skillset/experience required: • Demonstrable experience in cable/harness/interconnects design Minimum 2 years' experience using Visio and related tools (HarnWare) Ability to define, deploy and refine processes/best practices within Visio/HarnWare (electrical topology, wiring schematics, 2D manufacturing drawings, processes/standards) Thorough understanding of product data management and change management (Windchill or similar) Ability to design cable assemblies to electrical constraints (current, screening, signal types, volt drop, EMC, environmental requirements) Appreciation of cable assembly production/process engineering Desirable: military Defence Standards experience and working knowledge of D38999 connectors (cable harness manufacture) Ideally Degree/HND/HNC qualified (or equivalent experience) in Interconnects/Harness Design & Development Ability to lead interconnects/harness design work packages and work effectively in multi-disciplinary teams Strong written/verbal communication; able to produce clear engineering documentation Experience engaging/developing suppliers across internal/external teams * Awareness of cultural differences and ability to adapt accordingly

My client, a world leader in the defence sector, requires an Electronics Manufacturing Test Engineer to join their team and take ownership of manufacturing test solutions from early product development through to production readiness for their range of missile and weapon systems. Electronics Manufacturing Test Engineer This role offers the chance to build broader test engineering expertise across new products while developing your career within defence manufacturing. What You Will Be Doing • Supporting manufacturing test activities from concept development through to release into operations. • Contributing to test strategy development and influencing product testability during design phases. • Diagnosing electrical and electronic assembly failures to component level. • Supporting the introduction and control of test equipment, facilities and associated documentation. • Working closely with operations, design teams and stakeholders to resolve technical challenges. • Driving continuous improvement while meeting programme, cost, quality and delivery objectives Essential Requirements To be considered for this role, applicants will need to be qualified to HNC level or equivalent in a relevant engineering discipline (HND or degree level would be preferred) You will have previous experience of analogue and digital electronics test and fault diagnosis. With a background within manufacturing, production test or a similar engineering environment You will have: Understanding of electrical and electronic measurement principles and test equipment. Experience using manual and automated production test systems. Knowledge of fault-finding techniques for electronic and electro-mechanical assemblies. Familiarity with ERP and manufacturing execution systems such as SAP or MES. Ability to prioritise multiple activities and deliver against project requirements. Strong technical reporting, communication and problem-solving skills. Salary - circa £44,500 depending on experience Benefits and Flexibility Annual company bonus opportunity of up to £2,500 Pension contributions of up to 14% Paid overtime opportunities when available Up to 15 additional flexi leave days each year Flexi start/finish times Location Henlow, Bedfordshire Working Arrangements Hybrid working, typically 4 to 5 days per week on site due to operational needs. PLEASE NOTE: Due to the nature of work at our client's site, these vacancies are only open to sole British Citizens who hold SC clearance or can obtain it. This is a permanent role. Electus Recruitment Solutions provides specialist engineering and technical recruitment solutions to high-technology industries. Thank you for your interest. If you do not hear from us within seven working days, please presume your application has been unsuccessful on this occasion. You may resubmit your CV or details in the future, and we shall assess your suitability then

I'm currently supporting a client based in Letchworth Garden City, who are looking for an experienced Studio Manager. You will be working on the pre-print artwork production efforts, delivering to customers the companies core values of quality, service and speed. My client are specialists in high quality large format printing, POS solutions and displays. Previous experience in large format print production and manufacturing is essential. You'll have a "can-do" attitude and a keen eye for detail to ensure every product is produced to our highest standards, even when working to tight deadlines. The Role: All aspects of pre-press print production - ranging from simplistic small and large format print to complex manufacturing build projects Taking customer briefs and converting briefs into detailed technical drawings Producing assembly drawings, calculating yield of materials, assessing proposed production methods and identifying any potential issues with material etc Customer liaison Managing the Art-working team to prioritise workload, review and sign-off artwork before Production Designing and creating products using Adobe suite - including illustrator and photoshop for customer requirements and specifications - essential Communicating and liaising with the Production Team to ensure the products are produced to the highest possible standard and quality Assisting Production Team with RIP support Assisting Production Team with print finishing About you: Large format and manufacturing pre-press print production Team management experience Good multi-tasker Good team player Salary is negotiable DOE Working hours, 8am-5.30pm Monday - Friday

Mechanical Design Engineer Location: Stevenage - 4 days/week onsite minimum (likely flexible week to week) + 1 day remote Duration: 12 months Rate: £50/hour Umbrella IR35: Inside Clearance: SC + BPSS to start (UK Eyes Only) Overview You will work closely with other functional teams, to develop products to meet our customer's needs. Within this role you will have the opportunity to work as part of a multi-disciplinary team to perform a range of engineering activities including progressing developmental designs into production environments and working with suppliers on technical queries. Responsibilities: Carry out Mechanical Design and proving activities as part of a wider team for prime and variant products, of both piece parts and assemblies. Support/liaise with manufacturing, resolving manufacturing problems & defects. Support to functional & environmental testing and trials. Liaise with suppliers/purchasing to resolve any technical queries that may arise. Planning and reporting on own day-to-day activities to meet project milestones. Gain clarification of and help to generate requirements, including challenging of extraneous requirements to reduce lead time, UPC and design complexitySkillset/experience required: Experience using Creo 3D design toolKnowledge of several of the following: Manufacturing processes Tolerance studies Environmental test Mass property calculations Material selection FMEA Design for Manufacture/Assembly Environmental Gasket Sealing Structural design Defence Standards Review processes Product Lifecycles Industrial validation An ability to work as part of a multifunctional engineering team and be able to partake in or host design reviews. An appreciation of other engineering areas/domains

Job Title: Production Engineering Manager Location: Stevenage Salary: Competitive £50,000 - £60,000 A well-established manufacturing organisation is seeking a Production Engineering Manager to lead its Production Engineering and Operations teams, driving operational excellence across all manufacturing activities. This is a key leadership position responsible for ensuring efficient product assembly, successful introduction of new products, and continuous improvement of engineering processes, documentation, and production capability. The role requires a strong blend of technical expertise, people management, customer focus, and project leadership. You will oversee the production team ranging from senior engineers to junior and assistant-level staff while acting as a central point of coordination between production, customers, and internal stakeholders. This is a hands-on management role within a fast-paced, highly technical environment, where attitude, adaptability, and communication are just as important as engineering ability. Key Responsibilities Lead and develop the Production Engineering and Operations teams, managing performance, workload, and KPI reporting. Provide hands-on production engineering support, improving manufacturability, documentation, tooling, and layout efficiency. Own the full NPI process and act as the main customer-facing contact for engineering and build-related queries. Prepare assembly quotations, review customer documentation, and produce accurate build packs. Plan and prioritise engineering activities, supporting production schedules and ongoing project delivery. Drive continuous improvement across processes, quality, cost, and efficiency. Ensure compliance with all quality, safety, and environmental standards. Essential Demonstrable experience managing a Production/Testing or Manufacturing Engineering team. Strong background in electronics manufacturing with a solid understanding of best practices, NPI, and production engineering methods. Proven leadership capability with experience developing junior team members. Excellent communication and customer-facing skills; able to handle customer queries with professionalism and clarity. Ability to plan, prioritise, and adapt to changing priorities in a high-mix, fast-moving environment. Experience working as part of, or contributing to, a senior leadership team. Evidence of successful continuous improvement initiatives with measurable outcomes. Strong ERP and computer literacy, with confidence using data to drive decisions. Positive attitude, adaptability, and resilience under pressure. Strong problem-solving abilities with commercial awareness. Desirable HND or higher in Electronic Engineering or a related discipline. Experience in tooling design, ergonomic assessment, or layout optimisation. Training or certification in Lean, CI, Six Sigma, or related improvement methodologies

WE’RE HIRING: Production Assistant – Factory Reporting To: Head of Production & Manager Factory and Acrylics Location: On-site Position Type: Full-Time - Temp to Perm if successful after 12 weeks This role will be covering both of these job descriptions and working between both Job description 1 ; Junior Assembly Operative Working with our clients manufacturing team you will work closely to assemble various displays in multi material including wood, metal and acrylic. The right candidate will be a practical person with a good work ethic, be open to learn and develop on the job. Relevant training will be provided. Experience ideal but not essential; Hand Tools, Power Tools, Manual Handling. Job Description 2: Junior Print Finisher Working in a friendly environment, the successful candidate will have an opportunity to learn all aspects of quality print finishing and a chance to move forward into an exciting career in the ever-evolving print medium sector. The right candidate will have a positive attitude, a good work ethic, be open to learn and develop on the job. Relevant training will be provided. Mon - Fri 08.30 to 17.30 1 hour lunch break with 2x15 min tea breaks Free parking Under 21s £10.85 per hour - over 21's £12.71 Ready to Apply? If you're ready to learn new skills and grow with a supportive production team, we’d love to hear from you! Please send you CV into (url removed) Skills Required Positive attitude Practical person with a good work ethic Be open to learn and develop on the job. Keywords Full training will be given

JOB : PCB Assembler Location: Letchworth Garden City, SG6 Hours: Full time – flexible hours between 7:00am and 10:00pm (weekend availability highly desirable) Salary: £26,000 - £28,000 An excellent opportunity has now arisen for a PCB Assembler / Electronics Production Technician to join our client’s successful and growing team. Immediate interviews are available for suitable candidates. Who are they? Our client is a well-established Contract Electronics Manufacturer (CEM) specialising in high-quality PCB assemblies and electronic sub-assemblies across a range of industries. They are known for their friendly, supportive and relaxed working environment, offering a less pressurised alternative to larger high-volume manufacturing sites while still maintaining excellent quality standards. This is an excellent opportunity for someone currently working within electronics manufacturing who is looking for a more varied, hands-on role within a close-knit and highly skilled team. Candidates with SMT, AOI or SMT machine operating/programming experience will be highly desirable and may attract a higher salary level depending on experience. Benefits: • Competitive salary depending on experience and skill level • Flexible working hours • Friendly and supportive team environment • Stable, long-term opportunity within a growing company • Opportunity to develop SMT, AOI and wider electronics production skills • Overtime and weekend work opportunities available • Ongoing training and development Duties of a PCB Assembler / Electronics Production Technician: • Assemble PCBs to IPC-A-610 Class 2 and 3 standards • Carry out high-quality through-hole/conventional soldering with speed and accuracy • Conduct visual inspection of PCBAs to ensure quality standards are met • Test assembled circuit boards and identify faults where required • Carry out PCB rework, repair and component replacement • Complete electronic sub-assemblies and box build work where required • Follow technical drawings, assembly instructions and production documentation accurately • Maintain accurate production records and quality standards • Work within company quality management systems and procedures • Maintain a clean, organised and safe working environment • Support continuous improvement initiatives across production processes Desirable additional skills: • SMT soldering, rework and component replacement • AOI (Automated Optical Inspection) machine operation • SMT machinery setup, operation or programming • Previous experience within a Contract Electronics Manufacturer (CEM) environment What we would like from you: • Previous PCB assembly or electronics manufacturing experience • Proven through-hole soldering experience to IPC-A-610 Class 2/3 standards • Excellent soldering skills with strong attention to detail • Ability to read and interpret technical drawings and circuit diagrams • Experience with PCB inspection, testing and rework • Ability to identify electronic components and place them accurately • Good manual dexterity and hand-eye coordination • Ability to work accurately and efficiently to production targets • Strong concentration and ability to follow written instructions • Reliable, motivated and team-oriented approach • Candidates confident completing a high-quality soldering test within 45 minutes are highly encouraged to apply • Flexibility to work weekends would be highly advantageous This role would suit: • An Electronics Assembler, PCB Technician or Electronics Production Operative currently working within a CEM • Someone experienced in through-hole soldering looking for a less pressurised working environment • A candidate with SMT or AOI experience looking to expand their technical responsibilities • An electronics manufacturing professional who takes pride in quality workmanship and attention to detail If you are interested in this role, please apply below with your most recent CV. WGCINDPERM By applying to this job advertisement, you confirm you have read and understood our Data Protection and Privacy statement and give OA Group authorisation to hold your provided data. Thank you for your interest in this vacancy, which is being advertised by OA Group, who are acting as an employment agency / business. Your application will be considered in competition with others and we will contact you within 3 working days

Join our award-winning school cleaning team.We’re proud of our award-winning service, recognised with:.ASSIST-FM Contribution to Cleaning Award - 2022.APSE Building Cleaning Innovation Award - 2023.Building Cleaning Most Improved Performance Networks Award – 2024.ASSIST – FM Contribution to Cl

Work within the Councils estate of buildings undertaking cleaning duties as directed by line manager in accordance with the practices and procedures of the service.We are keen to employ a diverse workforce that reflects the people of Scotland.We welcome applications from all backgrounds and particul

ACTUAL CLOSING DATE: Applications must be received by Tuesday 18 August 2026 at 11:55pm.Please ensure that you read the full advert text and do not submit a CV, as these will be disregarded as they do not form part of SLC application process.If you require to submit additional information to suppor

Join Our Facilities Team – School Cleaner.Are you someone who takes pride in creating safe, welcoming spaces for others? Do you want to be part of a supportive, professional team that helps schools thrive? If so, we’d love to hear from you.We’re looking for a motivated and reliable Cleaner to

Cleaner x 3, Fixed Term until 31 December 2026.Work within the Councils estate of buildings undertaking cleaning duties as directed by line manager in accordance with the practices and procedures of the service.Mid Calder Primary School / Nursery.We are keen to employ a diverse workforce that reflec

Cleaner required for Cruden Bay public toilets, 5 hours per week, M/W/T/F/S.Responsible for cleaning premises to required standard.This role may require flexible, evening and weekend working.There is a responsibility for the post holder to demonstrate a commitment to quality service delivery through

We’re looking for motivated, reliable individuals to join our tissue paper production department. Operate and monitor tissue paper production machinery.

Please note that salary will be pro-rated for part-time and term-time hours.We have various cleaning positions across the Kirkintilloch, Lenzie and Twechar area within East Dunbartonshire.These posts are within our education and corporate premises.There are a variety of hours including morning shift

Bannatyne is renowned for providing exceptional fitness and wellness experiences across the UK.We are committed to maintaining the highest standards of cleanliness and hygiene to ensure our members have a safe and welcoming environment.We are currently looking for a dedicated and detail-oriented Mem

Full-Time / Part-Time / Seasonal.Join our One Great Team here at Haven as a Venue Cleaner, where you'll help create spotless, welcoming spaces for our guests to enjoy their next adventure!.We're seeking reliable, detail-oriented team members to keep our holiday park facilities shining.If you take pr

Holiday Cottage Cleaner - Polruan.We’re looking for a Holiday Cottage Cleaner to prepare our popular holiday cottages in South East Cornwall, located between Polruan and Polperro in the riverside position of Pont Quay and in the picturesque village of Lansallos.This role is based on annualised hou

Male and Female positions available).Bannatyne is renowned for providing exceptional fitness and wellness experiences across the UK.We are committed to maintaining the highest standards of cleanliness and hygiene to ensure our members have a safe and welcoming environment.We are currently looking fo

If youve also worked in the following roles, wed also like to hear from you: Machine Operator, Manufacturing Operative, Process Operative, Production Technician, Factory Assistant, Production Assistant, Warehouse Operative, Manufacturing Technician, Manufacturing Assistant, Assembly Operative, Packa

Previous experience within an electronics assembly or manufacturing environment. Carry out inspection and quality checks throughout the assembly process. Maintain accurate build records and production paperwork.

Working as an Electro Mechanical Assembler, your duties will include: Assembling electro-mechanical components to engineering drawings and specifications Wiring, crimping, and soldering (including small, intricate work) Building and testing PCB assemblies Requirements: Previous experience in

Working hours are 8am-5pm Monday to Thursday and 8am - 1pm Friday Responsibilities: Assemble mechanical components according to engineering specifications and instructions Use hand tools and power tools to complete assembly tasks * Inspect finished products for quality and accuracy

Previous experience in PCB assembly.

Interpret assembly drawings, BOMs, and work instructions. What We're Looking For * Experience in PCB assembly and electronic component handling.

Working under a covered canopy, you'll be involved in a variety of production and yard duties, including:. Operating production machinery (full training provided).

Straight Forward Recruitment is recruiting on behalf of their client for Production Operatives to work within the chilled production area of a pet food manufacturing facility. Weighing and adding ingredients to production mixers following production specifications. Assisting with general production

Supporting production activities as required. Assembly or manufacturing experience. Electronics assembly experience.

Essential Skills & Experience Experience in cable harness assembly, wiring looms or electro-mechanical assembly. An exciting opportunity has arisen for Assembly Technicians - Electrical to join a growing production team in Ampthill. Experience with: Crimping Soldering Cable preparation Connector as

Carrying out quality checks throughout the production process. Supporting the smooth operation of the print department to ensure production targets are met. Working effectively as part of a team to achieve production and quality objectives.

Key Responsibilities Prepare and handle ingredients before they enter the production line (sorting, measuring, portioning) Support food processing stages including mixing, preparing, filling, and portion control Weigh products accurately according to production specifications Pack, seal and label f