Production assembly jobs in BradfordCreate job alerts

We’re recruiting on behalf of a well-established UK engineering and manufacturing business looking to add an experienced Mechanical Fitter to its team.This is a hands-on role suited to someone with a strong mechanical background who takes pride in producing high-quality work. You’ll be joining a busy engineering environment where safety, quality and attention to detail are essential. \n As a Mechanical Fitter, you’ll be responsible for the mechanical assembly, fitting and installation of engineered equipment and components, working from technical drawings and specifications. \n The Role: \n\n • Carrying out mechanical fitting and assembly of equipment and components\n, • Reading and interpreting engineering drawings, specifications and work instructions\n, • Using hand tools, power tools and measuring equipment safely and accurately\n, • Drilling, tapping, bolting and general mechanical assembly\n, • Ensuring components are correctly aligned, fitted and secured\n, • Carrying out inspections and checks throughout the assembly process\n, • Identifying and reporting defects, faults or issues during fitting and assembly\n, • Working closely with engineering, production and quality teams\n, • Maintaining high standards of workmanship and housekeeping\n, • Following site health & safety procedures at all times\n\n What We’re Looking For: \n\n • Previous experience as a Mechanical Fitter, Assembly Fitter or similar\n, • A mechanical engineering or manufacturing background\n, • Experience working from engineering drawings\n, • Good practical knowledge of mechanical assembly techniques\n, • Confidence using hand tools, power tools and measuring equipment\n, • A strong understanding of health & safety within an engineering environment\n, • Good attention to detail and a quality-focused approach\n, • The ability to work effectively both independently and as part of a team\n\n A relevant mechanical engineering qualification, apprenticeship or equivalent practical experience would be advantageous.

Paint & Final Assembly Team Leader - Bespoke Joinery | Queensbury, Bradford \n\n • £31,500 - £33,000 per annum, dependent on experience\n, • Job Type: Full-time, Permanent / Hours: 39 hours per week\n, • Monday to Thursday: 7:00am - 3:30pm / Friday: 7:00am - 2:30pm\n\n Are you an experienced joiner with some supervisory or team leadership experience who enjoys keeping production moving, maintaining high standards and helping a team work effectively? \n We are recruiting for a Paint & Final Assembly Team Leader to join a long-established and growing specialist manufacturer of bespoke timber windows, doors, conservatories and orangeries in Queensbury, Bradford. \n This is a hands-on role where you will oversee the day-to-day running of the paint and final assembly department, ensuring products move through each stage efficiently, deadlines are achieved and quality standards are maintained. \n It could be an excellent next step for an experienced Bench Joiner who already has some leadership or supervisory experience and is looking to take on greater responsibility within a workshop environment. \n What You'll Be Doing \n As Paint & Final Assembly Team Leader, you'll be responsible for coordinating workflow across the paint and final assembly areas while supporting and leading a small team. \n Your responsibilities will include: \n\n • Overseeing the day-to-day operation of the paint and final assembly department.\n, • Planning and coordinating workflow to ensure jobs progress efficiently.\n, • Monitoring production schedules and ensuring deadlines are met.\n, • Identifying potential bottlenecks, delays or material shortages and taking action to resolve them.\n, • Ensuring windows, doors and frames are assembled, glazed and fitted with ironmongery correctly.\n, • Maintaining high standards of finish, accuracy and consistency.\n, • Holding daily progress meetings with the team.\n, • Communicating any issues affecting quality or production timescales to management.\n, • Supporting and mentoring team members.\n, • Developing, updating and implementing Standard Operating Procedures (SOPs).\n, • Identifying opportunities to improve efficiency, safety and quality.\n, • Helping to maintain a clean, organised and safe workshop environment.\n\n What We're Looking For \n This role requires someone who understands the practical side of joinery production and can combine this with strong organisational and people skills. \n You will ideally have: \n\n • Experience in bench joinery, glazing and fitting ironmongery.\n, • A good understanding of timber window and door manufacturing.\n, • Previous leadership, supervisory or team-leading experience.\n, • The ability to plan, organise and manage several jobs at the same time.\n, • Excellent attention to detail and a strong commitment to quality.\n, • Good communication and problem-solving skills.\n, • A proactive, hands-on approach.\n, • The confidence to identify issues and take action to keep production on track.\n\n What's on Offer \n\n • Salary of £31,500 - £33,000, dependent on experience.\n, • 39-hour working week.\n, • Early finish on Fridays.\n, • Permanent, full-time position.\n, • Supportive team environment.\n, • Uniform provided.\n, • Company events.\n, • The opportunity to have a genuine input into workshop processes and improvements.\n, • The stability of joining a long-established, growing business with an excellent reputation for quality craftsmanship.\n\n If you have a strong background in joinery and are ready to combine your practical knowledge with responsibility for leading a team and managing production workflow, we'd like to hear from you. \n Apply today with your CV. \n Key Appointments UK Ltd will assess your suitability for the role based on the information contained in your CV and application. This includes your skills, experience, education and location. \n By applying for this role, you give consent for your CV to be processed by Key Appointments for recruitment purposes only. Our full Privacy Policy is available on the Key Appointments website. \n Due to the volume of applications we receive, we are unable to provide individual feedback to candidates who are not shortlisted. However, we will inform you of the outcome of your application in due course.

Futures recruitment are looking to appoint and experienced Switchgear Engineer to join an established UK engineering and manufacturing business. \n This is an excellent opportunity for an electrically biased engineer with experience in LV switchgear, switchboards, control panels or associated electrical equipment to join a growing engineering team. \n The role will give you responsibility across the full engineering lifecycle, from reviewing customer specifications and developing electrical designs through to supporting manufacture, testing and final delivery. \n As a Switchgear Engineer, you'll be responsible for developing technically compliant and practical switchgear solutions while working closely with customers, project teams, production, procurement and suppliers. \n Key responsibilities will include: \n\n • Reviewing customer specifications, technical schedules and project requirements.\n, • Designing and engineering LV switchgear, switchboards and associated electrical equipment.\n, • Producing and reviewing single-line diagrams, electrical schematics, wiring diagrams and general arrangement drawings.\n, • Selecting appropriate electrical components, including ACBs, MCCBs, MCBs, contactors, CTs, metering equipment and protection devices.\n, • Supporting busbar sizing, fault-level requirements, short-circuit withstand and equipment ratings.\n, • Producing bills of materials and maintaining accurate technical documentation.\n, • Ensuring designs are practical, safe and suitable for manufacture.\n, • Providing technical support to production and assembly teams throughout the build process.\n, • Investigating and resolving engineering issues identified during manufacture or testing.\n, • Liaising with customers and suppliers to resolve technical queries and agree design requirements.\n, • Supporting inspection, testing and Factory Acceptance Testing (FAT).\n, • Ensuring designs meet relevant electrical standards and internal quality requirements.\n, • Identifying opportunities to improve existing designs, standardise products and improve manufacturing efficiency.\n\n What We're Looking For \n\n • An HNC, HND, degree or equivalent qualification in Electrical Engineering or a related discipline.\n, • Previous experience designing or engineering LV switchgear or switchboards.\n, • Strong electrical design and engineering knowledge.\n, • Experience reading and producing electrical schematics and single-line diagrams.\n, • Knowledge of ACBs, MCCBs, busbars, CTs, metering and protection equipment.\n, • An understanding of short-circuit ratings, fault levels and protection principles.\n, • Knowledge of BS EN / IEC 61439 or similar relevant standards.\n, • Experience using AutoCAD, AutoCAD Electrical, EPLAN or similar design software.\n, • Experience supporting equipment through manufacture and testing.\n, • Strong fault-finding and technical problem-solving skills.\n, • The ability to communicate effectively with customers, suppliers and manufacturing teams.\n

Fututre are recruiting for an experienced Hydraulics Fitter to join a well-known and established manufacturing business. This is an excellent opportunity for a skilled fitter with strong hydraulic experience to join a reputable manufacturer offering a professional working environment, varied hands-on work and the opportunity to become part of an experienced engineering team. As a Hydraulics Fitter, you will be responsible for the assembly, installation and testing of hydraulic systems and components used within the company's manufactured equipment. Your responsibilities will include: Fitting and assembling hydraulic components, systems and associated equipment Installing hydraulic hoses, pipes, valves, pumps, cylinders and related components Reading and interpreting engineering drawings, hydraulic schematics and technical specifications Building and connecting hydraulic systems in accordance with manufacturing requirements Testing completed hydraulic assemblies and identifying faults or leaks Diagnosing and resolving hydraulic and mechanical issues Carrying out adjustments, repairs and component replacement where required Ensuring completed work meets the company's quality and safety standards Working closely with engineering, production and quality teams Maintaining a clean, organised and safe working environment About You Previous experience as a Hydraulics Fitter, Mechanical Fitter, Assembly Fitter or similar Good practical knowledge of hydraulic systems and components Experience fitting hydraulic hoses, pumps, valves and cylinders The ability to read engineering drawings and hydraulic schematics Strong mechanical fitting and assembly skills Experience using hand tools, power tools and workshop equipment Good fault-finding and problem-solving abilities A strong approach to quality and attention to detail The ability to work effectively both independently and as part of a team Relevant engineering, mechanical or hydraulic qualifications would be advantageous, although candidates with strong practical experience are also encouraged to apply

Mechanical Fitter £31,500pd, Bradford Centre, regular OT available at 1.5 x's and 2 x's, yearly pay rises , early finish Friday Fantastic opportunity for a mechanical fitter to work on interesting machinery build and repair projects. Great environment, regular training and salary reviews in line with skill set. You role will include: Manufacturing mechanical systems to drawings Undertaking repair, maintenance, test and installation of systems as required Working to set production targets and SOP's Diagnosing and repairing faults and technical problems Working in line with H & S and ensuring equipment is calibrated and safe. Undertake plastic pipe fitting working to P & ID drawings You will have: Proven mechanical fitting experience in a workshop environment Hold Level 3 NVQ in Mechanical engineering The ability to troubleshoot, test, repair and service technical equipment. Proven mechanical background in commercial or Industrial installations. The ability to interpret technical drawings, layout and General Assembly. work to a high quality level and be able to undertake equipment testing Experience with pipework or poly prop fusion of interest but not essential The company are well established family business with a strong client based and full order book they have a great reputation in their field. The working environment is clean and well equipped with a solid and long-standing work force. They offer training and development into different areas of the business such as multi skilling, commissioning, design and offer long-term progression into supervisory roles. Benefits include: Working hours are 7.30-4pm Monday to Thursday with 3pm finish on Fridays Hourly rate starting at £15.57 increasing to £16.04 after probation pass. 39 hours per week. Healthcare cash plan Pension salary sacrifice Christmas closure Birthday off Training and development Travail Employment Group Ltd is acting as an Employment Agency in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we endeavour to contact everyone, sometimes we are unable to. If you have not heard from us within 10 working days of making your application, please assume that you have been unsuccessful on this occasion

Fabrication & Assembly Technician Bradford, £ £13.30- £13.80 per hour We're looking for a skilled and hands-on Fabrication & Assembly Technician to join a busy production team, working on the build and completion of high-quality modular structures. Key Responsibilities: Assemble modular and timber-based structures in line with detailed technical drawings and specifications Operate a range of workshop machinery including panel saws, cross-cut saws and wall saws to prepare materials accurately Interpret drawings and use measuring equipment to ensure precision and quality throughout the build process Install doors, locks, vents and additional components to complete finished units to specification Maintain efficient workflow to ensure build targets and production schedules are achieved Carry out a range of duties including assembly, testing, maintenance and on-site installation when required Record and maintain accurate production and process documentation Safely operate workshop equipment and adhere to all health & safety procedures and standard operating processes What We're Looking For: Background in fabrication, carpentry, joinery or general workshop assembly work Ability to read and interpret technical drawings Good level of English and communication skills Flexible approach to working hours and production demands Confident using hand tools, machinery and workshop equipment Call Yasemin at Travail for more information Workshop Operative (Laminating) - NPS GRP Hours: 7.30am start and a 4pm finish Monday - Thursday with a 3pm Friday finish Roles & Responsibilities: Manufacture of GRP building to specified engineering CAD drawings Competent handling of materials and chemicals ensuring use is within specified regulations Ability to use measurement devices ensuring compliance with drawings issued Ensure workflow of a product is to schedule Undertake maintenance, manufacturing, test and installation tasks as requested Document processes Operate any vehicle or company equipment in a safe manner and in line with any published SOPs Follow all company's filed procedures and protocols Maintain a clean and tidy working environment Assist the supervisor to participate in an efficient workshop that complies to regulatory requirements, ensure equipment is calibrated and safe, raise action logs to support corrective action and root cause analysis Build positive relationships with customers where relevant or during site or customer visits Provide service and customer support during field service visits or installations Undertake other duties linked to your role that benefit the company from time to time on reasonable request of your line manager Essential role requirements: English literacy Ability to work flexible hours and to adapt to changing work schedules Familiarity with tools and applications A proactive approach to health & safety Strong team player Desirable role requirements: Previously worked in a manufacturing environment Proven workshop laminating or GRP handling experience Travail Employment Group Ltd is acting as an Employment Agency in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we endeavour to contact everyone, sometimes we are unable to. If you have not heard from us within 10 working days of making your application, please assume that you have been unsuccessful on this occasion

Steel Fabrication Manager Location: Bradford Salary: £(phone number removed) per annum (plus benefits) Job Type: Permanent / Full Time Rotational Mouldings Group Ltd is a well-established manufacturing business operating across three North West sites in Furness Vale, Rochdale and Bradford, specialising in the design and manufacture of high-quality rotationally moulded plastic products. With a long-standing reputation for quality, reliability and innovation, the business continues to invest in its people, facilities and processes. They are now seeking an experienced Steel Fabrication Manager to take responsibility for leading the fabrication operations at their Bradford site. Reporting directly to the Group Operations Manager, you will take full responsibility for the day-to-day management and performance of the Bradford steel fabrication operation, leading the team to deliver safely, efficiently, on time and within budget. Working across mild steel and stainless-steel fabrication, you will oversee the complete production process including laser cutting, folding, welding, galvanising, painting and the subsequent assembly of fabricated metal items. You will plan and manage workflow, capacity and resources; monitor productivity, quality and costs; support costing and estimating; and work closely with purchasing, suppliers, quality and sales to ensure projects run smoothly from start to finish. You will also drive continuous improvement across the operation, identifying opportunities to increase efficiency, reduce waste and improve performance, while maintaining exceptional standards of health & safety, quality and housekeeping. To be shortlisted, you will have proven experience managing a steel fabrication environment and a strong practical understanding of fabrication processes, welding and manufacturing techniques, including fabrication design. You will be commercially aware, comfortable with costing, estimating and production control, and confident reading and interpreting engineering drawings. Just as importantly, you will be an engaging and proactive leader who can develop people, create accountability and build a strong, high-performing team. With ambitious plans for future growth and expansion of the Bradford operation, including the potential development of the factory, this role will suit someone with real drive and ambition who wants to do more than simply manage the day-to-day – someone with a proactive, growth mindset who can identify opportunities, challenge how things are done and play a key role in shaping the future of the site. Ideal skills & qualities for this role are: Highly organised Problem Solver Excellent Communicator Hands On Leader Commercial Acumen Resilient Pro active Takes Responsibility To Apply If you feel you are a suitable candidate and would like to work for this reputable company, please do not hesitate to apply

An opportunity for a Graduate Mechanical Engineer has become available with an established and well-respected engineering company based in the Bradford area of West Yorkshire. The successful Graduate Mechanical Engineer will become a member of the existing design team and will be responsible for detailed designs of mechanical systems and components. Joining an award-winning business, you can expect excellent training and development, as well as long term career prospects. Mechanical Engineer - Responsibilities: Developing mechanical designs to an agreed specification, meeting deadlines, design criteria, liaising with suppliers. Developing designs for projects from initial enquiry, producing costings and producing Bill of Materials. Working as part of a multi discipline engineering team to develop complex product solutions. Working on varied types of drawings from single line design concepts to intricate detailed manufacturing drawings. Produce accurate working drawings for production. Produce sales proposal drawings. Provide support to other engineers and technicians. Keeping drawing schedules up to date for issued and received drawings. Skills & Qualities Required: Degree, HNC/HND or equivalent qualification in Mechanical Engineering or related discipline. Demonstratable mechanical design gained from university projects, placement year, and/or commercial engineering experience. knowledge of Autodesk Inventor and Vault software, or similar CAD packages. Understanding of fabrication, welding, sheet metal and assembly techniques. Excellent communication and problem-solving skills. Ambition, drive and enthusiasm. If you are an aspiring Mechanical Design Engineer looking for an opportunity to join a leading business and be part of engineering team where you will learn, develop and hone your mechanical engineering skills, then please apply now

Mechanical Assembly Operative / Assembly Op £13.56 per hour / £27,499 per annum 39hrs per week, Days - Temp Positions IMMEDIAE STARTS On behalf of our client based in Bradford, West Yorkshire, SLA Employment Solutions are looking to recruit Mechanical Assemblers for immediate starts. You must have previous experience in mechanical assembly or production build, be able to understand engineering/ technical drawings, experience soldering and using hand , air and power tools. Knowledge of manual handling techniques is essential as heavy lifting may be involved. Duties will include: Assembly of complete units Drilling Soldering Use of hand tools Hours: 6am to 2.30pm from Mon to Thurs with an 11.40am finish on a Friday Pay: £13.56 per hour / £27,499 per annum Interested? Don’t delay….Please call Stacey on 0/7/7/8/5/2/5/1/1/6/7 or email your CV by selecting the “Apply Now” option ( Mechanical Assembler / Mechanical Assembler / Mechanical Assembler / Mechanical Assembler / Engineering / Manufacturing / Soldering / Production / Operative / Machine Operator / Assembly Operative / Brazer / Brazing / Soldering / Solderer ) ( Leeds / Bradford / Shipley / Bingley Halifax / Huddersfield )

Mechanical Assembly Operative / Assembly Op £13.56 per hour / £27,499 per annum 39hrs per week, Days - Temp Positions IMMEDIAE STARTS On behalf of our client based in Bradford, West Yorkshire, SLA Employment Solutions are looking to recruit Mechanical Assembler for immediate starts. You must have previous experience in mechanical assembly or production build, be able to understand engineering/ technical drawings, experience soldering and using hand , air and power tools. Knowledge of manual handling techniques is essential as heavy lifting may be involved. Duties will include: Assembly of complete units Drilling Soldering Use of hand tools Hours: 6am to 2.30pm from Mon to Thurs with an 11.40am finish on a Friday Pay: £13.56 per hour / £27,499 per annum Interested? Don’t delay….Please call Stacey on 0/7/7/8/5/2/5/1/1/6/7 or email your CV by selecting the “Apply Now” option ( Mechanical Assembler / Mechanical Assembler / Mechanical Assembler / Mechanical Assembler / Engineering / Manufacturing / Soldering / Production / Operative / Machine Operator / Assembly Operative / Brazer / Brazing / Soldering / Solderer ) ( Leeds / Bradford / Shipley / Bingley Halifax / Huddersfield )

MECHANICAL DESIGN ENGINEER We are recruiting for a Design Engineer to work for our client who are based in Bradford, West Yorkshire. This role is well suited to an engineer with experience in special purpose machinery, food processing equipment, automation, or industrial machinery, particularly someone who is confident designing complete mechanical systems in SolidWorks and working from concept through production. THE DUTIES OF A DESIGN ENGINEER: Design manufacturing equipment using SolidWorks 3D CAD. Develop prototypes and conduct testing to ensure performance, reliability, and safety. Create manufacturing documentation including: 2D engineering drawings Assembly drawings Bills of Materials (BOMs) Customer Procurement (CP) drawings Work closely with manufacturing, fabrication, operations, and project management teams. Support production during manufacturing and resolve design issues. Manage design changes and maintain accurate engineering documentation. Perform design-to-cost calculations and prepare technical reports. Research competitor products and contribute to new product development. Provide occasional on-site customer support, including presentations and fault finding. ESSENTIAL EXPERIENCES & SKILLS: Minimum 5 years' experience in mechanical design engineering. Strong proficiency in: SolidWorks CAD Microsoft Office Experience taking products from concept through prototype to manufacture. Strong problem-solving and analytical skills. THE HOURS: Working on days Monday to Friday: 8:00 am – 4:30pm = 39 hours per week. This can be adjusted to suit travel time. THE PAY: You will earn an annul salary between £40k-45k per annum Questech Recruitment is a specialist engineering support within the Mechanical & Engineering industry, our focus is to support many clients within the M&E Sectors. If you feel you match the desired criteria, or you would like more information on roles such as CNC Machinist , CNC Programmer, CNC Setter , CNC Operator, we would really like to hear from you.#CNC #CNCProgrammer #fanuc #CNCSetter #CNCOperator #heidenhein #hurco #design

Paint & Final Assembly Team Leader - Bespoke Joinery |.Job Type: Full-time, Permanent / Hours: 39 hours per week.Monday to Thursday: 7:00am - 3:30pm / Friday: 7:00am - 2:30pm.Are you an experienced joiner with some supervisory or team leadership experience who enjoys keeping production moving, m

Paint & Final Assembly Team Leader - Bespoke Joinery | Queensbury, Bradford £31,500 - £33,000 per annum, dependent on experience Job Type: Full-time, Permanent / Hours: 39 hours per week Monday to Thursday: 7:00am - 3:30pm / Friday: 7:00am - 2:30pm Are you an experienced joiner with some supervisory or team leadership experience who enjoys keeping production moving, maintaining high standards and helping a team work effectively? We are recruiting for a Paint & Final Assembly Team Leader to join a long-established and growing specialist manufacturer of bespoke timber windows, doors, conservatories and orangeries in Queensbury, Bradford. This is a hands-on role where you will oversee the day-to-day running of the paint and final assembly department, ensuring products move through each stage efficiently, deadlines are achieved and quality standards are maintained. It could be an excellent next step for an experienced Bench Joiner who already has some leadership or supervisory experience and is looking to take on greater responsibility within a workshop environment. What You'll Be Doing As Paint & Final Assembly Team Leader, you'll be responsible for coordinating workflow across the paint and final assembly areas while supporting and leading a small team. Your responsibilities will include: Overseeing the day-to-day operation of the paint and final assembly department. Planning and coordinating workflow to ensure jobs progress efficiently. Monitoring production schedules and ensuring deadlines are met. Identifying potential bottlenecks, delays or material shortages and taking action to resolve them. Ensuring windows, doors and frames are assembled, glazed and fitted with ironmongery correctly. Maintaining high standards of finish, accuracy and consistency. Holding daily progress meetings with the team. Communicating any issues affecting quality or production timescales to management. Supporting and mentoring team members. Developing, updating and implementing Standard Operating Procedures (SOPs). Identifying opportunities to improve efficiency, safety and quality. Helping to maintain a clean, organised and safe workshop environment. What We're Looking For This role requires someone who understands the practical side of joinery production and can combine this with strong organisational and people skills. You will ideally have: Experience in bench joinery, glazing and fitting ironmongery. A good understanding of timber window and door manufacturing. Previous leadership, supervisory or team-leading experience. The ability to plan, organise and manage several jobs at the same time. Excellent attention to detail and a strong commitment to quality. Good communication and problem-solving skills. A proactive, hands-on approach. The confidence to identify issues and take action to keep production on track. What's on Offer Salary of £31,500 - £33,000, dependent on experience. 39-hour working week. Early finish on Fridays. Permanent, full-time position. Supportive team environment. Uniform provided. Company events. The opportunity to have a genuine input into workshop processes and improvements. The stability of joining a long-established, growing business with an excellent reputation for quality craftsmanship. If you have a strong background in joinery and are ready to combine your practical knowledge with responsibility for leading a team and managing production workflow, we'd like to hear from you. Apply today with your CV. Key Appointments UK Ltd will assess your suitability for the role based on the information contained in your CV and application. This includes your skills, experience, education and location. By applying for this role, you give consent for your CV to be processed by Key Appointments for recruitment purposes only. Our full Privacy Policy is available on the Key Appointments website. Due to the volume of applications we receive, we are unable to provide individual feedback to candidates who are not shortlisted. However, we will inform you of the outcome of your application in due course. TPBN1_UKTJ

Systems & Controls Production Team Leader. We are seeking a Systems & Controls Production Team Leader to join our team in Bradford. Operational Execution: Execute the production plan, run daily briefings, maintain visual management boards, and support hands-on panel wiring/assembly when needed.

Paint & Final Assembly Team Leader - Bespoke Joinery | Queensbury, Bradford. This role requires someone who understands the practical side of joinery production and can combine this with strong organisational and people skills. Experience in bench joinery, glazing and fitting ironmongery.

Lead a paint and final assembly team in a bespoke joinery manufacturing setting, ensuring efficient workflow, high-quality standards, and meeting production deadlines.

Mechanical Assembly Op Temp, Days, £13.56p/hr, 39hrs per week, Mon-Fri BRADFORD I am recruiting Mechanical Assemblers to work for a busy Manufacturing and Engineering company based in Bradford. You must have previous Mechanical Assembly or Production build experience, be able to follow written engineering/technical drawings, have experience soldering and good knowledge of using hand, air and power tools. Knowledge of Manual Handling Techniques will be vital as the role will include heavy lifting. The work is quite intricate, so dexterity will be vital. If you are looking for a lot of variety in your work, then this might not be for you. The work will be repetitive, working on and assembling the same/similar units every day. Day to day duties will include: -Basic assembly work -Drilling -Soldering -Operating hand tools -General cleaning and tidying of the workspace area Day shifts are 6am to 2.30pm from Mon to Thurs with an 11.45am finish on a Friday, with a Pay Rate of £13.56p/hr and Overtime paid at time + ½. The role is advertised as Temporary initially, but could be Temp to Perm for the right candidates. If you are interested in this role, please either apply within, or send your CV to INDLEE

Mechanical Assembly Operative / Assembly Op £13.56 per hour / £27,499 per annum 39hrs per week, Days - Temp Positions IMMEDIAE STARTS On behalf of our client based in Bradford, West Yorkshire, SLA Employment Solutions are looking to recruit Mechanical Assembler for immediate starts. You must have previous experience in mechanical assembly or production build, be able to understand engineering/ technical drawings, experience soldering and using hand , air and power tools. Knowledge of manual handling techniques is essential as heavy lifting may be involved. Duties will include: • Assembly of complete units, • Drilling, • Soldering, • Use of hand tools Hours: 6am to 2.30pm from Mon to Thurs with an 11.40am finish on a Friday Pay: £13.56 per hour / £27,499 per annum Interested? Don’t delay….Please call Stacey on 0/7/7/8/5/2/5/1/1/6/7 or email your CV by selecting the “Apply Now” option ( Mechanical Assembler / Mechanical Assembler / Mechanical Assembler / Mechanical Assembler / Engineering / Manufacturing / Soldering / Production / Operative / Machine Operator / Assembly Operative / Brazer / Brazing / Soldering / Solderer ) ( Leeds / Bradford / Shipley / Bingley Halifax / Huddersfield )

Electronic Assembler Location: Bradford Salary: DOE Overview: Our Client based in Bradford provide enabling technologies for industrial growth markets. We have evolved from a company that was primarily focused on aerospace and defence, to one that serves multiple markets that require advanced technology and high reliability. Their mission is to enable their customers to make the world safer, more secure and better connected. They're a world leader in the design, manufacture and support of radio frequency (RF) technology. With unrivalled RF & microwave application knowledge they have experience of creating innovative solutions for the most challenging applications. What you'll be involved in: Hand assembly of electronic devices using soldering, epoxy and bonding techniques. Follow, maintain and uphold all Company Operating Procedures, Quality Instructions and associated policies. Working to process specifications, manufacturing instructions and required standards as determined by the product design. Meet requirements of line and audit inspection to maintain AS9100 and ISO9001 requirements. Follow written, pictorial and verbal working instructions from Engineers and other team members. Highlight any re-work issues and record all failures as required by company operating procedures Ensuring all areas are kept clean, tidy and free of ESD hazards at all times and ensure all planned maintenance responsibilities are carried out. Work with the Engineering team and Operations Support Engineering team during redesign and new product introduction. Work with the Operations Test teams and ensure smooth flow of product is maintained. Participate in Continuous Improvement activities and any new working initiatives. Report any problems with materials or equipment to their Operations management team. Assist with training new operators as required. Assist in the generation of new manufacturing aids as required. Contribute to and support all the lean manufacturing techniques adopted as part of the Teledyne Production System including 5S, Kaizen, KANBAN etc. Any other reasonable duties as directed by a member of Operations management.What we're looking for in you: High level of dexterity Possess a solid, quality minded work ethic and strong attention to detail Ability to read complex assembly drawings and process instructions Prior experience in assembly or production is an advantageWe offer a range of benefits that include: Salary sacrifice-led pension plan that matches employee contributions up to 6% Employee Assistance Programme Free life assurance cover at the value of four times basic annual salary Holiday purchase scheme which enables employees to purchase an additional week's worth of annual leave each year Comprehensive wellbeing programme that supports employees with their physical, mental and financial health, as well as their cultural/environmental wellbeing Competitive employee discounts platform that provides employees with discounts with leading brands/retailers Internal reward and recognition scheme linked to internal benefits platform Cycle to Work scheme Enhanced family-friendly benefits Company sick pay Equality, Diversity & Inclusion Committee that supports and champions employee diversity Local discounts and offers (e.g. gyms) About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies

Job Title: Production Operative Location: Cleckheaton Working Hours: Rotating Shifts Monday to Friday (Adhoc) Pay Rate: £13.01 - 14.00 p/h About the Role Nexus People are recruiting for Production Operatives in Cleckheaton to work for our client who are experts in premium skincare, haircare and loads more. What You’ll Be Doing Stationed at a fast moving production line Operating machines that fill cartridges Labelling, packing and product box assembly Keeping the warehouse clean, safe and organised Working with your team to hit daily targets What We’re Looking For We welcome applications from people with different backgrounds and experiences. You don’t need specific qualifications – if you’re dependable and eager to get stuck in, you’re halfway there. You should be: Able to work on your feet and lift items (within safe manual handling limits) Comfortable in a warehouse environment A team player who communicates well Flexible and able to follow instructions Punctual, with a good work ethicWhat You’ll Get in Return Weekly pay & opportunities for overtime On-the-job training and development Opportunities to progress into permanent roles Staff discounts & reward schemes (where applicable) A friendly, inclusive team that celebrates diversity Safe and supportive working environment Excellent refreshment facilitiesSound Like A Great Opportunity? Apply today

Mechanical Assembly Operative / Assembly Op £13.56 per hour / £27,499 per annum 39hrs per week, Days - Temp Positions IMMEDIAE STARTS On behalf of our client based in Bradford, West Yorkshire, SLA Employment Solutions are looking to recruit Mechanical Assemblers for immediate starts. You must have previous experience in mechanical assembly or production build, be able to understand engineering/ technical drawings, experience soldering and using hand , air and power tools. Knowledge of manual handling techniques is essential as heavy lifting may be involved. Duties will include: Assembly of complete units Drilling Soldering Use of hand tools Hours: 6am to 2.30pm from Mon to Thurs with an 11.40am finish on a Friday Pay: £13.56 per hour / £27,499 per annum Interested? Don’t delay….Please call Stacey on 0/7/7/8/5/2/5/1/1/6/7 or email your CV by selecting the “Apply Now” option ( Mechanical Assembler / Mechanical Assembler / Mechanical Assembler / Mechanical Assembler / Engineering / Manufacturing / Soldering / Production / Operative / Machine Operator / Assembly Operative / Brazer / Brazing / Soldering / Solderer ) ( Leeds / Bradford / Shipley / Bingley Halifax / Huddersfield )

Fabrication & Assembly Technician Bradford, £ £13.30- £13.80 per hour We're looking for a skilled and hands-on Fabrication & Assembly Technician to join a busy production team, working on the build and completion of high-quality modular structures. Key Responsibilities: Assemble modular and timber-based structures in line with detailed technical drawings and specifications Operate a range of workshop machinery including panel saws, cross-cut saws and wall saws to prepare materials accurately Interpret drawings and use measuring equipment to ensure precision and quality throughout the build process Install doors, locks, vents and additional components to complete finished units to specification Maintain efficient workflow to ensure build targets and production schedules are achieved Carry out a range of duties including assembly, testing, maintenance and on-site installation when required Record and maintain accurate production and process documentation Safely operate workshop equipment and adhere to all health & safety procedures and standard operating processes What We're Looking For: Background in fabrication, carpentry, joinery or general workshop assembly work Ability to read and interpret technical drawings Good level of English and communication skills Flexible approach to working hours and production demands Confident using hand tools, machinery and workshop equipment Call Yasemin at Travail for more information Workshop Operative (Laminating) - NPS GRP Hours: 7.30am start and a 4pm finish Monday - Thursday with a 3pm Friday finish Roles & Responsibilities: Manufacture of GRP building to specified engineering CAD drawings Competent handling of materials and chemicals ensuring use is within specified regulations Ability to use measurement devices ensuring compliance with drawings issued Ensure workflow of a product is to schedule Undertake maintenance, manufacturing, test and installation tasks as requested Document processes Operate any vehicle or company equipment in a safe manner and in line with any published SOPs Follow all company's filed procedures and protocols Maintain a clean and tidy working environment Assist the supervisor to participate in an efficient workshop that complies to regulatory requirements, ensure equipment is calibrated and safe, raise action logs to support corrective action and root cause analysis Build positive relationships with customers where relevant or during site or customer visits Provide service and customer support during field service visits or installations Undertake other duties linked to your role that benefit the company from time to time on reasonable request of your line manager Essential role requirements: English literacy Ability to work flexible hours and to adapt to changing work schedules Familiarity with tools and applications A proactive approach to health & safety Strong team player Desirable role requirements: Previously worked in a manufacturing environment Proven workshop laminating or GRP handling experience Travail Employment Group Ltd is acting as an Employment Agency in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we endeavour to contact everyone, sometimes we are unable to. If you have not heard from us within 10 working days of making your application, please assume that you have been unsuccessful on this occasion

Leeds, LS28 Join a Market-Leading Manufacturing Business Are you an experienced Assembly Technician or Mechanical Fitter looking for your next opportunity? We are recruiting on behalf of a well-established and innovative manufacturing company based in Leeds (LS28). Our client is a recognised leader in the design and manufacture of commercial cooking equipment, supplying products to some of the world's most renowned food service and hospitality brands. This is an excellent opportunity to join a modern, forward-thinking manufacturing environment where quality, teamwork, and continuous improvement are at the heart of everything they do. The Role As an Assembly Technician, you will play a key role in the assembly and manufacture of high-quality equipment, ensuring products meet the highest standards of workmanship and performance. The successful candidate will have a minimum of three years' experience in a similar assembly, manufacturing, or mechanical fitting environment and demonstrate strong technical and problem-solving skills. Key Responsibilities • Assemble large electrical and mechanical components to specification., • Interpret and work from engineering drawings, technical documents, and assembly instructions., • Use overhead cranes to safely move and position components and assemblies., • Ensure all work is completed to the highest quality standards., • Follow health and safety procedures and company policies at all times., • Maintain a clean, organised, and safe working environment., • Contribute to continuous improvement initiatives within the production team. Working Hours Rotating Shift Pattern (Monday to Friday): Week 1 • Monday to Friday: 6:00am - 2:00pm Week 2 • Monday to Thursday: 12:30pm - 10:00pm Enjoy a great work-life balance with no regular weekend working. Pay & Benefits • £15.14 per hour on day shift, • £18.93 per hour on back shift, • Overtime opportunities available, • Free onsite parking, • Modern manufacturing facility, • Ongoing training and career development, • Competitive pay rates, • Excellent public transport links, • Opportunity to work for a respected and growing manufacturer, • Supportive team culture with long-term career prospects About You To be successful in this role, you will ideally have: • Previous experience in assembly, mechanical fitting, or manufacturing engineering., • Experience operating overhead cranes (up to 120 tonnes preferred)., • Strong mechanical aptitude and practical engineering skills., • The ability to read and interpret engineering drawings., • Excellent attention to detail and commitment to quality., • A strong focus on health and safety., • A positive attitude, reliability, and a strong work ethic. Apply Today If you're looking for a long-term opportunity with a successful and growing manufacturer, we'd love to hear from you. Apply now and take the next step in your engineering and manufacturing career

Steel Fabrication Manager Location: Bradford Salary: £(phone number removed) per annum (plus benefits) Job Type: Permanent / Full Time Rotational Mouldings Group Ltd is a well-established manufacturing business operating across three North West sites in Furness Vale, Rochdale and Bradford, specialising in the design and manufacture of high-quality rotationally moulded plastic products. With a long-standing reputation for quality, reliability and innovation, the business continues to invest in its people, facilities and processes. They are now seeking an experienced Steel Fabrication Manager to take responsibility for leading the fabrication operations at their Bradford site. Reporting directly to the Group Operations Manager, you will take full responsibility for the day-to-day management and performance of the Bradford steel fabrication operation, leading the team to deliver safely, efficiently, on time and within budget. Working across mild steel and stainless-steel fabrication, you will oversee the complete production process including laser cutting, folding, welding, galvanising, painting and the subsequent assembly of fabricated metal items. You will plan and manage workflow, capacity and resources; monitor productivity, quality and costs; support costing and estimating; and work closely with purchasing, suppliers, quality and sales to ensure projects run smoothly from start to finish. You will also drive continuous improvement across the operation, identifying opportunities to increase efficiency, reduce waste and improve performance, while maintaining exceptional standards of health & safety, quality and housekeeping. To be shortlisted, you will have proven experience managing a steel fabrication environment and a strong practical understanding of fabrication processes, welding and manufacturing techniques, including fabrication design. You will be commercially aware, comfortable with costing, estimating and production control, and confident reading and interpreting engineering drawings. Just as importantly, you will be an engaging and proactive leader who can develop people, create accountability and build a strong, high-performing team. With ambitious plans for future growth and expansion of the Bradford operation, including the potential development of the factory, this role will suit someone with real drive and ambition who wants to do more than simply manage the day-to-day – someone with a proactive, growth mindset who can identify opportunities, challenge how things are done and play a key role in shaping the future of the site. Ideal skills & qualities for this role are: Highly organised Problem Solver Excellent Communicator Hands On Leader Commercial Acumen Resilient Pro active Takes Responsibility To Apply If you feel you are a suitable candidate and would like to work for this reputable company, please do not hesitate to apply

Mechanical Fitter £31,500pd, Bradford Centre, regular OT available at 1.5 x's and 2 x's, yearly pay rises , early finish Friday Fantastic opportunity for a mechanical fitter to work on interesting machinery build and repair projects. Great environment, regular training and salary reviews in line with skill set. You role will include: Manufacturing mechanical systems to drawings Undertaking repair, maintenance, test and installation of systems as required Working to set production targets and SOP's Diagnosing and repairing faults and technical problems Working in line with H & S and ensuring equipment is calibrated and safe. Undertake plastic pipe fitting working to P & ID drawings You will have: Proven mechanical fitting experience in a workshop environment Hold Level 3 NVQ in Mechanical engineering The ability to troubleshoot, test, repair and service technical equipment. Proven mechanical background in commercial or Industrial installations. The ability to interpret technical drawings, layout and General Assembly. work to a high quality level and be able to undertake equipment testing Experience with pipework or poly prop fusion of interest but not essential The company are well established family business with a strong client based and full order book they have a great reputation in their field. The working environment is clean and well equipped with a solid and long-standing work force. They offer training and development into different areas of the business such as multi skilling, commissioning, design and offer long-term progression into supervisory roles. Benefits include: Working hours are 7.30-4pm Monday to Thursday with 3pm finish on Fridays Hourly rate starting at £15.57 increasing to £16.04 after probation pass. 39 hours per week. Healthcare cash plan Pension salary sacrifice Christmas closure Birthday off Training and development Travail Employment Group Ltd is acting as an Employment Agency in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we endeavour to contact everyone, sometimes we are unable to. If you have not heard from us within 10 working days of making your application, please assume that you have been unsuccessful on this occasion

Major Recruitment are currently looking for a General Operative to join our busy production and manufacturing team. The successful candidate will be involved in a variety of general production, assembly and furnace work, supporting the team to ensure work is completed safely, efficiently and to a high standard. Key Responsibilities Carrying out general production and manufacturing duties. Assembly work using hand and power tools. Operating and working around furnaces. Reading and interpreting detailed engineering drawings. Measuring and checking components to ensure they meet required specifications. Following production instructions and working to set procedures. Maintaining a clean, safe and organised working environment. Carrying out manual handling and heavy lifting of materials, typically 10-30kg. Working as part of a team to meet production targets and deadlines.Requirements Previous experience in a production, manufacturing or engineering environment is desirable. Experience using hand and power tools. Ability to read and understand detailed technical/engineering drawings. Previous furnace or foundry experience would be an advantage. Good attention to detail and a strong work ethic. Ability to work safely and follow instructions. Physically capable of regular manual handling and lifting of 10-30kg. Reliable, punctual and able to work effectively as part of a team.Shift Pattern Week 1 Monday-Thursday: 6:00am-2:00pm Friday: 6:00am-11:00amWeek 2 Monday-Thursday: 2:00pm-10:00pm Friday: 11:00am-4:00pmThis is a rotating two-week shift pattern. Pay £13.76 per hour If you have practical experience in production or manufacturing, are confident using power tools, can read detailed drawings and are comfortable with manual handling, we would like to hear from you. Apply now to join our production team. INDAC

Order Picker Required in Cleckheaton ASAP Our successful client is requiring new people to join their team as soon as possible. Hours – Monday - Friday 9.30am-6pm (40 hours per week) It might require an 8am start for the first couple of weeks, so flexibility require with this. Pay - £13.00 per hour. Location – Cleckheaton BD19. (Very accessible on major bus routes) Length of assignment – This is an ongoing assignment with no current end date Role – Order picking, with general warehouse duties required as well. Experience – Previous warehouse experience is essential. Packing Order Picking Production Line work Assembly Warehouse Quality Checking If you feel that this is the role for you then please apply online today with an up-to-date CV. Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you! The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see (url removed) /> Many Thanks

Fututre are recruiting for an experienced Hydraulics Fitter to join a well-known and established manufacturing business. This is an excellent opportunity for a skilled fitter with strong hydraulic experience to join a reputable manufacturer offering a professional working environment, varied hands-on work and the opportunity to become part of an experienced engineering team. As a Hydraulics Fitter, you will be responsible for the assembly, installation and testing of hydraulic systems and components used within the company's manufactured equipment. Your responsibilities will include: Fitting and assembling hydraulic components, systems and associated equipment Installing hydraulic hoses, pipes, valves, pumps, cylinders and related components Reading and interpreting engineering drawings, hydraulic schematics and technical specifications Building and connecting hydraulic systems in accordance with manufacturing requirements Testing completed hydraulic assemblies and identifying faults or leaks Diagnosing and resolving hydraulic and mechanical issues Carrying out adjustments, repairs and component replacement where required Ensuring completed work meets the company's quality and safety standards Working closely with engineering, production and quality teams Maintaining a clean, organised and safe working environment About You Previous experience as a Hydraulics Fitter, Mechanical Fitter, Assembly Fitter or similar Good practical knowledge of hydraulic systems and components Experience fitting hydraulic hoses, pumps, valves and cylinders The ability to read engineering drawings and hydraulic schematics Strong mechanical fitting and assembly skills Experience using hand tools, power tools and workshop equipment Good fault-finding and problem-solving abilities A strong approach to quality and attention to detail The ability to work effectively both independently and as part of a team Relevant engineering, mechanical or hydraulic qualifications would be advantageous, although candidates with strong practical experience are also encouraged to apply

We are currently recruiting Assembly Operatives for a leading automotive manufacturing company based in Shipley. This is an excellent opportunity for motivated and reliable individuals looking for stable work with training provided. Working Hours - (Alternating Shifts ) Monday to Thursday: 6:00am – 2:00pm 2:00pm – 10:00pm Friday: 6:00am – 11:00am 11:00am – 4:00pm Payrate - £13.76 Per Hour Key Responsibilities Carry out assembly operations in line with production schedules and quality standards Safely operate power tools and hand tools as required for the assembly process Perform repetitive assembly tasks, including manual handling and heavy lifting, throughout the shift Follow detailed work instructions, drawings, and specifications accurately at all times Conduct basic quality checks to ensure products meet required standards Maintain a clean, tidy, and organised work area Adhere strictly to health and safety regulations, company policies, and procedures Work effectively as part of a team to meet daily production targets Report any faults, defects, or safety concerns to supervisors promptly Demonstrate flexibility to work across different tasks and departments when required Participate in training to develop skills and improve performance Candidate Requirements Ability to use power tools Strong work ethic with excellent attendance and punctuality Good communication skills Comfortable with heavy lifting Attention to detail Willingness to learn and develop new skills Ability to work in a fast-paced environment Assembly experience is advantageous, but not essential. What’s on Offer Free onsite parking Canteen facilities Vending machines Ongoing training and support Opportunity to work with a well-established automotive company If you are motivated, reliable, and ready to contribute, apply now to begin your journey with us. Major Recruitment acts as an Employment Agency for permanent roles and as an Employment Business for temporary opportunities. INDEC

Due to continued growth within the business, we are looking to recruit TIG Welders / Production Assembly Operatives to join our Welding & Assembly Team. The Role Position: Production Assembly / TIG Welder Hours: Full-time various shift patterns available Contract: Temporary initially, with the o

A technical recruitment agency is seeking an experienced Assembly Technician to support operations in the aerospace sector.

Permanent Futures Limited is seeking a Production Engineer to join a busy manufacturing environment in Leeds. You will work with machining, welding, fabrication and assembly teams to optimise processes, resolve technical challenges, and ensure products are manufactured safely and to quality standard

Also providing kit sub assembly/ replenishment and hands on assembly within a busy assembly line operation. Can you highlight some previous and experience in a electrical and mechanical production operation ?This is a great opportunity to grow learn and develop on to electro - mechanical assembly ro

Our client is looking to recruit a Senior Production Process Engineer for a brand new assembly line in Oxford, working with best in class materials and equipment to deliver high end products for the aerospace and defence markets. The ideal Senior Production Process Engineer will hold a BEng or MEng

Seeking an Assembly Operative for a manufacturing business, responsible for sewing, general assembly, and following instructions.

Production & Assembly Technician. Working as part of a skilled production team, you'll be involved in the assembly and build of specialist equipment and systems used across a variety of industries. Whether you've gained experience in manufacturing, assembly, vehicle maintenance, mechanical fitting,

Looking for flexible work with great shift options and an immediate start? We’re looking for reliable and hardworking Production Operatives to join a busy vegetable production team in Freuchie / Balmalcolm. Working as part of a fast-paced production team. Previous production experience is useful b

Machine Operator, Manufacturing Operator, Production Operator, Production Operative, Manufacturing Operative, Forge Operator, CNC Operator, Machine Setter, Engineering Operative, Engineering Operator, Process Operator, Press Operator, Heavy Manufacturing, Engineering, Manufacturing, Industrial, Aero

Electrical Assembly Technician. Electrical Assembly Technician.

Female Cleaner - Sunbury-On-Thames.We are Places for People Group, we're a social enterprise that believes it's people that make a community.That's why we build homes and deliver services for everyone in the community to thrive.At Places Leisure we are changing lives by creating active places and he

TQR are working exclusively with a global Manufacturer based at their Plymouth site to recruit experienced Production Operator on the Night Shift due to a vast increase in production levels. Essential Experience & Candidate Attributes Required: * Recent Production experience gained from a fast-pa

Permanent, full-time, term time only.School Staffing Solutions are working with a brand new school, opening its doors in January 2027, and we're looking for a dedicated Cleaner to help create a safe, welcoming and well-maintained environment for our pupils and staff from day one.It will be a nurturi

Key Responsibilities Operating the Beamsaw safely and efficiently Cutting timber and other materials accurately to specification Supporting the wider door manufacturing process Working across different areas of the factory as required Following production instructions and health & safety procedures

Responsibilities Operate and set machines accurately to meet production specifications. Complete any quality checks and production documentation as required. Identify and resolve minor technical issues during production runs.

Folder Gluer Machine Operator Perm role, £34k pa, Rotating Days/Afters, 37.BRADFORD Do you currently work in the Print Industry and are looking for a change? Or do you have previous Print Industry experience that you would like to revisit? Then I may have the role for you.I am looking for an

Work Strata Group are delighted to have partnered with a leading food production and distribution client who are seeking pickers to work at their Scunthorpe based site.

We are looking for reliable and hardworking Food Production Operatives to join a busy food production team based on the outskirts of Taunton. Working within a chilled production environment. Supporting the wider production team as required.

We are looking for a reliable and detail-focused Production Operative to join our manufacturing team in HX4. Keep production areas clean, organised, and compliant with safety standards. Work collaboratively with colleagues to meet daily production targets.