Trabajos production assembly en EastleighCrear alertas

Structural Engineer - Composites Purpose of Role • The new employee will be a key member of the structural engineering team., • Provide production support on all yachts in build., • Production of 3D assembly models and production drawings for new product development., • Create work instructions to assist production., • Design of tooling components., • Review of independent and internal yacht surveys., • Focus on continual im... ZIPC1_UKTJ

Location: SouthamptonPay Rate: Approx. £15.00 – £17.00 per hour, depending on experienceJob Type:Long-term temporary, ongoing (with potential to become permanent)Hours: Full-Time Overview We are recruiting on behalf of a well-established engineering and manufacturing organisation seeking an Electromechanical Assembly Technician to support an increased workload. This is a long-term temporary, ongoing requirement with a strong possibility of a permanent role for the right candidate. The position sits within a medium-volume, low-mix manufacturing environment and involves hands-on assembly, testing, troubleshooting, and repair of complex electromechanical assemblies. You will also work closely with production engineering to support continuous improvement initiatives and manufacturing efficiency. Key Responsibilities • Assembly, disassembly, testing, troubleshooting, and repair of electromechanical assemblies, • Performing highly technical electronic assembly, test, and repair tasks, • Troubleshooting electronic assemblies under engineering supervision using bench equipment (e.g. multimeters, oscilloscopes), • Hand soldering of discrete surface-mount components, • Working from blueprints, schematics, drawings, manuals, samples, and general instructions, • Manufacturing products that meet customer and internal quality standards, • Minimising waste and scrap in line with continuous improvement objectives, • Identifying faults in electronic and control equipment and supporting corrective actions, • Disassembling equipment and replacing defective or failed components, • Maintaining high standards of safety, cleanliness, and organisation in the workplace, • Clear verbal and written communication skills, • Ability to read and understand electrical schematics, blueprints, and specifications, • Confident troubleshooting electronic assemblies and circuit boards, • Strong problem-solving ability with excellent attention to detail, • Well organised, reliable, and able to complete tasks on time, • Able to work both independently and as part of a team, • Strong awareness of quality and safety regulations, • A-Levels or equivalent, • Minimum of three years’ experience in a manufacturing environment involving assembly and troubleshooting of electronic or electromechanical systems, • Ability to stand for extended periods and undertake bench-based assembly work, • Ability to lift up to 25 lbs (approx. 11 kg), • Good manual dexterity for installing and modifying equipment This job description outlines the main responsibilities of the role but is not exhaustive. Duties may vary depending on business requirements. Application Process Shortlisted candidates may be asked to complete a practical skills assessment as part of the interview process. Apply now for immediate consideration.

Composite Technician (Boat Builder) - Southampton We are seeking a dynamic and motivated Composite Technician (Boat Builder). This is an exciting opportunity to be part of a high performance team working between their new facility in Southampton, and attending multiple global events to support the Technical Team. As a Composite Technician you will have knowledge and experience in all aspects of composite boat building and strive to work to the highest standards possible whilst working to time critical targets. Responsibilities • Be able to read and understand production drawings and follow part specifications precisely, • To build and assemble carbon fibre structural components with a high degree of accuracy and attention to detail, • Extensive practical knowledge in all areas of composite boat building including mould / pattern making, construction and assembly, trimming, fitting and bonding processes, • Laminating to a high standard in prepreg, wet lay up, secondary bonding and core bonding, • Skilled use of hand and power tools and confident use of table saw, band saw, chop saw, sanding wheels and other large equipment, • Confident to work independently and prioritise duties with minimal supervision, in order to meet deadlines, • To ensure components and tooling are handled with care to prevent any form of damage, • Preparation of mould tools including set up, release coats / release films, • Provides advice and guidance within the roles area of expertise, • Maintaining a safe, clean and tidy working environment at all times. Requirements • Driven by delivering quality with a strong sense of pride in their work, • Effective communication skills, coupled with the ability to work independently or as part of a team, • Able to problem solve, • Brave and always ready to embrace the challenge presented, • Extremely good attention to detail, • Ability to work effectively and thrive in a fast-paced, start-up environment, • Self-starter, action-oriented, resourceful, • Culturally sensitive and able to effectively work globally, • A keen interest in engineering design would be beneficial, • Able to multitask and work under pressure to deliver to deadlines, • You are expected to work with minimum supervision and may be expected to deal with other duties appropriate to your skill set and ability, • Able to work under general supervision, as part of a team and be able to manage a small group on projects from time to time. If this position interests you, and you would like to learn more or explore other available jobs that could also match your skill set, please apply today or email or call +44 (0) 2392 322 384

About the Role We are recruiting for a Senior Engineer - Production to play a key role bridging structural design development and shipyard production engineering on complex, high-quality superyacht projects. This is a production-facing role for an engineer who understands traditional and modern shipbuilding (large and small) — particularly fabricated steel and aluminium structures — and enjoys working at the interface between design intent, shipyard reality, and classification requirements. You will work closely with Lateral’s in-house structural design team while acting as a trusted technical point of contact for shipyards, production engineers, and classification societies throughout the build cycle. The role suits someone who brings sound engineering judgement, practical experience, can coordinate constructive problem-solving, and who wants their experience to genuinely influence build outcomes. What You’ll Be Doing • Acting on assigned projects as primary production liaison between Lateral’s structural design team, shipyards, and classification societies., • Supporting shipyards during fabrication and assembly by responding to production queries, and build-phase issues., • Coordinating the translation of structural design intent into buildable, practical solutions, considering fabrication methods, tolerances, access, and sequencing., • Helping to resolving clashes between structure, systems, outfit, and production constraints., • Coordinating structural responses to evolving design information while protecting build progress and quality., • Providing constructive feedback into the design process to improve buildability, reduce rework, and strengthen future standards., • Technically guiding and coordinating structural engineers and designers where required, ensuring outputs are suitable for production use., • Supporting classification interactions by interpreting rule requirements in a production-aware, pragmatic manner., • Contributing to the ongoing development of production-ready details, standards, and processes. What We’re Looking For Essential experience and skills: • At least 6 years’ experience in the marine industry, with demonstrable involvement in shipyard production, fabrication, refit, or production-liaison roles., • Strong understanding of ship structural design and how it is applied to fabricated structures, including local structure and foundations., • Practical experience with steel and/or aluminium construction, ideally including block or modular fabrication., • Proven ability to assess technical challenges and apply sound engineering judgement to reach practical solutions., • Confident communicator, able to work effectively with designers, shipyard teams, and classification societies., • Well organised, self-motivated, and comfortable working to production schedules and deadlines., • 2D CAD (AutoCAD) for producing and reviewing production-ready drawings. Desirable (but not essential): • 3D CAD experience (Rhino or similar) for coordination and design interrogation., • Familiarity with Classification Society and Flag State requirements., • Experience supporting construction, commissioning, or refit phases., • Structural analysis experience., • An interest in improving buildability, efficiency, and innovation in yacht engineering. The role is based in our Southampton office, and we offer flexibility and hybrid working arrangements around the core hours and in-office days required for our team. About the Company Lateral Naval Architects provides complete engineering expertise to the superyacht industry, from project conception to delivery, operation, and refit. Our core competency is engineering, but our unique focus is on meaningful innovation to enable superyachts that meet the demands of today's owners and those of the future. We believe that meaningful innovation starts with asking new questions. If you feel you're the right candidate for the role, we'd love to hear from you.

Production Specialist (Contract) Location: Eastleigh Duration: 6 months Rate: Up tp £45/hour - Umbrella Inside IR35 Our client seeks a skilled Production Specialist for contract work building helicopter rotor trackers, aircraft cables, and engine monitoring units at their Chandlers Ford facility. Focus: Safety, Quality, Delivery, Cost. Key Responsibilities: • Hand soldering, crimping, PCB assembly per specs/drawings, • Test/inspect products to BoM standards, • Fault finding, rework/repair on PCBs, • Goods inspection, continuous improvement input, • Team collaboration and efficient operations Essential Skills (2+ years): • Electro-mechanical assembly (soldering, wiring, crimping), • Read schematics, wire diagrams, BoMs, • Identify electronic components (resistors etc), • ESD procedures, basic PC skills (Word, Teams etc), • Excellent manual dexterity Desirable: IPC610/620 certs, conformal coating, PCB repair, NVQ L3 Electrical Eng, QC experience Immediate start for right candidate. Apply with CV.

Our prestigious client has an immediate requirement for a number of Electro-Optic Test Operators. Successful candidates will have a proven track record from within a similar or highly relevant background (lasers, fibre optic cables / microelectronics would be preferable). Test Operators are responsible for testing, inspecting, and verifying products to ensure they meet performance, quality, and customer specifications. This role involves operating test equipment, analysing results, and documenting findings in a manufacturing or laboratory environment. Key Responsibilities Perform functional and performance testing of electro-optic assemblies and systems. Set up and operate electro-optic test equipment. Follow test procedures, work instructions, and engineering documentation. Inspect components for defects and verify alignment, focus, and calibration. Record test results accurately and complete required documentation. Identify test failures and create defect records. Communicate test results and issues to engineering and quality teams. Ensure compliance with safety, quality, and handling procedures (ESD, laser safety, cleanroom protocols if applicable) Maintain test equipment and report calibration or maintenance needs. Support continuous improvement and process optimisation initiatives. Qualifications & Experience High school diploma or equivalent (technical certificate or associate degree preferred) Experience in electronics, optics, or electro-mechanical testing preferred. Familiarity with optical and electronic measurement tools Use of Microsoft Office Software and SAP ERP Systems for data entry and reporting Electro-Optic Test Operator - Required Skills and Abilities Testing & Inspection Perform functional, performance, and acceptance testing of electro-optic components and systems as defined within Work Instructions and Test Specifications Set up, operate, and verify electro-optic test equipment (optical benches, lasers, cameras, detectors, power meters, oscilloscopes, etc.) Align, focus, and calibrate optical assemblies per specifications. Conduct visual inspections using microscopes and precision tools. Documentation & Reporting Follow approved test procedures, work instructions, and engineering documentation. Record test data accurately and complete test reports and logs where applicable- Identify non-conformances and document test failures (consulting with Engineers where required) Communicate results and issues to engineering, quality, or supervision. Troubleshooting & Support Assist engineers with root-cause investigations and corrective actions. Support qualification testing, and production validation where required. Quality & Compliance Ensure compliance with quality standards, customer requirements, and regulatory guidelines. Follow ESD, cleanroom, and laser safety procedures (where applicable) Handle sensitive optical components carefully to prevent damage or contamination. Equipment & Work Area Maintenance Maintain test equipment and workstations in proper working condition. Verify calibration status and report equipment issues or deviations. Maintain clean, organised, and safe test areas (5S) Continuous Improvement Participate in process improvement and efficiency initiatives. Provide feedback on test procedures and equipment effectiveness. Support cross-training and knowledge sharing within the team. Equipment & Materials Handling Operate and perform basic checks on assembly equipment (Process Checks as defined) Handle materials and components properly to prevent damage. Report equipment malfunctions or maintenance needs. Teamwork & Continuous Improvement Work effectively as part of a team to meet production goals. Participate in training, cross-training, and improvement activities. Suggest process improvements to enhance efficiency and quality. For security reasons, applications can only be accepted from UK nationals with the ability to pass BPSS security clearance. These roles are being recruited on a long term contract basis, but (due to the level of training involved) permanent opportunities are expected to be available in the future. To apply, or for more detail, please reach out with your latest CV to Steve Johnstone at Morson Edge using TPBN1_UKTJ

Electronics Test Engineer (PCBA Manufacturing) Apply (by clicking the relevant button) after checking through all the related job information below. £33,000- £38,000 + Training + Flexible Hours + Progression to Management + Emerging Technology + Varied + Increasing Holiday with Service up to 38 Days Fordingbridge Are you an Electronics Test Engineer or similar from a manufacturing/production background, looking for a varied role within an innovative company, offering ongoing training and support on manufacturing processes to allow progression to a Production Engineer? On offer is the chance to join a market-leading Electronics Manufacturer, who specialises in creating and designing electronic solutions for a wide range of companies in the Automotive, Aerospace, and telecommunications industries. In this role you will be primarily office based (80%) focusing on building documentation and producing drawings using CAD to assist with electronics production. You will be involved in prototyping, testing, and troubleshooting, making this a varied role with no two days the same. This role will suit somebody from an electronics background who has knowledge of the manufacturing process, looking to propel their career within a company who will invest heavily into their development. The Role: • Providing technical support for production of electronics, • Creating documentation and drawings using 2D/3D CAD, • Involved in prototyping, testing, and troubleshooting, • Electronics Engineer, • Manufacturing/production background, • Looking for a primarily office-based role Keywords: Production, operative, Assembly, electronics, electronic assembly, Fordingbridge, Electrics, Building, Circuits Reference Number: 24139 If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. xrnqpay By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Our prestigious client has an immediate requirement for a number of Wirebonding Technicians. Successful candidates will have recent experience from a similar cleanroom environment (defence microelectronics ideally). Wirebonding Technicians are responsible for the assembly, wire bonding, inspection, and process control of electronic or semiconductor devices to ensure products meet quality, reliability, and performance requirements in a manufacturing environment. Are you the right applicant for this opportunity Find out by reading through the role overview below. Key Responsibilities Assembly Assemble parts and subassemblies using hand tools, fixtures, and equipment Follow work instructions, drawings, and standard operating procedures Meet production targets while maintaining quality standards Inspect assembled products for defects and ensure conformance to specifications Report quality issues, equipment problems, or material shortages Maintain a clean and organised work area (5S) Follow all safety policies and procedures Complete required production and quality documentation Support continuous improvement initiatives Wire Bonding Perform wire bonding operations (ball bond, wedge bond, or ribbon bond) using gold & palladium wire Set up and operate wire bond machines (manual or automatic) Optimize bonding parameters (force, power, time, loop height) Conduct bond pull, shear, and visual inspections Identify and troubleshoot wire bond defects (NSOP, lifted bonds, heel cracks, shorts) Qualifications & Experience Prior Wirebonding, Manufacturing and Assembly experience is essential Ability to read basic drawings and work instructions Experience using hand tools and precision assembly equipment Skills & Competencies Attention to detail and quality focus Manual dexterity and hand-eye coordination, with ability to manipulate extremely small parts with consistent accuracy Ability to work in a team environment Time management and reliability Work Environment & Physical Requirements Manufacturing / Production working environment (Cleanroom & Temperature and Humidity Controlled) Ability to stand or sit for extended periods Repetitive motion and fine motor tasks may be required Manufacturing Assembly Operator - Roles & Responsibilities Assembly & Production Assemble components, subassemblies, and finished products according to work instructions and drawings Use hand tools, power tools, fixtures, and assembly equipment safely and correctly Meet production targets while maintaining quality standards Quality Control Inspect parts and assemblies to ensure they meet specifications Identify, report, and help correct defects or non-conformances Follow quality procedures and documentation requirements Safety & Compliance Follow all safety rules, procedures, and PPE requirements Handle ESD-Sensitive Devices following company ESD control procedures Maintain a safe, clean, and organised workstation (5S) Report safety hazards, incidents, or near misses Documentation & Reporting Complete production records and maintain process checklists accurately Track quantities produced, scrap, and rework Communicate issues related to materials, equipment, or processes Ability to consult / Liaise with Engineering Teams on task requirements For security reasons, applications can only be accepted from UK nationals, with the ability to pass BPSS security clearance. xrnqpay These roles are being recruited on a long term contract basis, but (due to the level of training involved) permanent opportunities are expected to be available in the future. To apply, or for more detail, please reach out with your latest CV to Steve Johnstone at Morson Edge using (url removed)

A global leading technology organisation based in Hampshire are Optical Engineer to join their expanding R&D facility based in Southampton, Hampshire. As an Optical Engineer in Southampton, Hampshire you will be responsible for researching, designing, developing and manufacturing prototype high power laser systems and equipment, owning several laser projects concurrently. You will ensure constant communication with related areas of the business including R&D Engineering teams and manufacturing, to be able to oversee successful transfer of processes to production. Some of the responsibilities of the Senior Optical Engineer based in H Southampton, Hampshire: Take ownership of new high power laser product development activities from concept to transfer to production; work with other Engineers (optical, mechanical, electronics and the customers) to define and agree on requirements, develop designs and innovative technical solutions. Experience of working on High Power (kW power level) fibre or bulk lasers Design and run experiments, feasibility studies and assembly and testing of prototypes, identifying problems and applying new and innovative solutions. Skills/Experienced needed from the Optical Engineer: High level of hands-on experience with High Power (kW power level) fibre or bulk lasers. Specialist knowledge of the physics of fibre and/or bulk laser technology. Good understanding of optical, electronic and mechanical requirements for industrial reliability. APPLY NOW for this Senior Optical Engineer position based in Hampshire by sending your CV to quoting ref. THD1296 or if you'd like more information before applying, you can call Tom Drew on 01582 878848. Otherwise, we always welcome the opportunity to discuss other engineering jobs. TPBN1_UKTJ

Job Title: Welding Operative - Temperature Sensors Scroll down to find an indepth overview of this job, and what is expected of candidates Make an application by clicking on the Apply button. Location: Farnborough Contract: 6 Month Contract Pay Rate: Umbrella £21.23 p/h / PAYE £15.15 p/h (£17.76 inc holiday) Working Hours: * Monday - Thursday: 7:30am - 4:00pm * Friday: 7:30am - 1:30pm Clearence Requirements: For this role you will need to be a British or Duel British National. The Role We are currently recruiting for a welding operative to join a specialist manufacturing team based in Farnborough on a 6 month contract. This role will involve hands on microscopic assembly work within a production cell. You will receive full training and on-the-job support, however, you will need to have fine welding skills and soldering skills already. This a great opportunity for both experienced candidates and those at the early stages of their engineering careers. Key Responsibilities * Microscopic welding with some soldering, of temperature sensor components * Working to engineering drawings and written instructions * Assembling components to a high-quality standard * Following all quality, safety, and production procedures * Working effectively within a small, supportive production cell Skills & Experience * Previous fine detailed experience is essential in welding * Ability to read engineering drawings and follow detailed xrnqpay instructions * Good attention to detail and manual dexterity * A positive attitude and willingness to learn We welcome applications from: * Candidates with engineering degrees but little or no hands-on experience * Candidates with limited production or manufacturing experience looking to develop their skills Get in touch if you would like to discuss this role in more detail or send your CV thorugh to us!

Transducer Engineer Underwater Acoustics Is this your next job Read the full description below to find out, and do not hesitate to make an application. We are seeking an experienced and motivated Transducer Engineer to join an Electromechanical Design team working at the forefront of underwater acoustics technology. This is a high-impact role offering the opportunity to lead continuous, data-driven improvement across transducer systems used in demanding global applications. This position is ideal for someone with a strong background in acoustics or transducer technology, who enjoys combining hands-on engineering with analytical problem-solving and cross-functional collaboration. The Role Reporting to the Senior Transducer Engineer, you will be responsible for defining, validating, and continuously improving acoustic performance and quality across new and existing products throughout their lifecycle. Key Responsibilities • Define and maintain acoustic quality standards and acceptance criteria, • Work closely with production to ensure efficient, high-quality manufacture of transducers, • Support the introduction of new designs into production, • Provide technical leadership in evaluating and validating acoustic performance, • Specify acoustic quality requirements during early-stage product design, • Lead root cause investigations and drive corrective actions, • Develop and implement continuous improvement strategies, • Represent acoustic quality in design reviews, product release, and supplier discussions, • Proven experience in underwater acoustics, transducer performance, or acoustic quality control, • Strong understanding of acoustic theory, signal processing, and transducer technologies, • Experience with quality management systems and continuous improvement methods, • Ability to interpret acoustic test xrnqpay data and performance specifications, • Practical mechanical engineering skills, including prototype assembly and testing, • Excellent problem-solving, communication, and collaboration skills, • Experience developing lab software or test tools, • Background in offshore energy, oceanography, autonomy (AUV/ROV/ASV), or defence sectors, • Degree in Physics, Mathematics, or Engineering (BEng/BSc minimum), • Experience in a relevant industry

Introduction Saab in UK is growing rapidly, with over 500 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. What you will be part of Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The following information aims to provide potential candidates with a better understanding of the requirements for this role. The Role: This role is part of our Saab Seaeye Business Unit in Fareham. The role will aim to provide Production Engineering support for the final assembly and testing of remotely operated vehicles and systems, with a focus on clear, standardised process documentation. In addition, ensure appropriate production processes, equipment, and facilities are in place to safely and consistently manufacture products to meet cost, time, and quality requirements. Key Responsibilities: * Conduct an analysis of current SOPs in the integration department to identify gaps, outdated procedures and areas for improvement. * Standardise process and procedures across the department to ensure consistency, reduce variation, and enhance cross-departmental collaboration. * Own, document and train others on manufacturing process and standards. * Attend SQCDP meetings and support a hands-on problem solving approach with Area Team Leader and Quality Engineering to achieve OTD and right first time objectives. * Assess compliance and adhere to safety/quality standards. * Providing technical support for production and production control. * Developing, optimising and implementing factory floor layouts/production cells. * Analyse data to drive continuous improvement of processes and workflows. Skills and Experience: * Multi-disciplined senior engineer with an electrical bias and experience in test, pre-commissioning, and fault finding. * Background in low-volume, one-off engineered products and systems; ideal for Production, Project, or Delivery Engineers. * Strong mechanical, electrical, and systems engineering knowledge, especially for complex assemblies like ROVs. * Troubleshooting: Technical problem-solving skills to diagnose and resolve production issues. * Minimum qualifications HNC/HND, Bachelor's degree or relevant experience preferably in Electrical, Mechanical, Engineering, Industrial Engineering, Manufacturing Engineering, or a related field. * Hands-on production support experience in assembly, testing, and quality control. * Relevant certifications (e.g., Lean Manufacturing, Six Sigma Green Belt) are a plus; familiarity with hydraulics is also beneficial. Support and training is available for Working with Electrics, High Voltages, and Hydraulics. xrnqpay By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Manufacturing Engineer 12 Month Fixed-Term Contract Southampton, Hampshire £45,000 £50,000 An established high-tech manufacturing business based in Southampton is seeking a Manufacturing Engineer to join their Operations Engineering team on a 12-month fixed-term contract . The company designs and manufactures advanced laser technology used across a wide range of industrial applications worldwide. With new products being introduced at pace, this role will play a key part in supporting manufacturing capability, improving processes and ensuring successful product introduction into production. This is a hands-on engineering role , working closely with production, engineering and NPI teams to optimise manufacturing processes, drive continuous improvement and support operational performance. The role is approximately 50% cleanroom based , so experience or comfort working within controlled environments would be beneficial. The Role You will be responsible for delivering improvements across manufacturing processes, supporting operational teams and ensuring efficient and safe manufacturing practices. Key responsibilities will include: Providing manufacturing engineering support to production and operations teams Driving continuous improvement activities focusing on quality, cost, and cycle time reduction Implementing lean manufacturing techniques and structured problem solving methods Designing and improving manufacturing cell layouts and production flow Creating and maintaining Standard Operating Procedures (SOPs) and manufacturing documentation Supporting the introduction of new technologies and product lines into production Analysing manufacturing data to identify improvement opportunities Supporting NPI teams to ensure designs are manufacturable and production-ready Leading improvement initiatives across manufacturing cells Conducting risk assessments for new equipment, processes and procedures Investigating and resolving manufacturing non-conformances Experience Required Essential: 35 years experience within a Manufacturing Engineering role Experience with lean manufacturing tools such as value stream mapping and structured problem solving (A3, 8D, DMAIC) Experience analysing manufacturing data and identifying improvement opportunities Experience creating work instructions, SOPs or standard work documentation Strong Excel and general IT skills Good understanding of health & safety within manufacturing environments Experience implementing 5S Desirable: Experience working in a cleanroom or controlled environment Fine mechanical or precision assembly experience Six Sigma Green Belt Knowledge of OEE, capacity planning or takt-based production flow Experience with TPM or Gage R&R Optical fibre handling or fusion/splicing experience Basic SQL knowledge Qualifications Degree qualified in an engineering discipline , or equivalent experience. Personal Profile Highly organised with strong attention to detail Proactive and naturally curious, always looking for ways to improve processes Strong structured problem-solving ability Comfortable working in a fast-moving manufacturing environment Able to communicate effectively across engineering, operations and production teams Adaptable and able to manage multiple priorities TPBN1_UKTJ

We are seeking a detail-oriented and motivated Transducer Test Engineer to join an Electromechanical Design team working on advanced underwater acoustic technologies. This is a hands-on, versatile role supporting both existing products and calibration equipment used across UK and international operations. Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. This position offers an excellent opportunity to contribute to innovative subsea transducer systems while developing your skills alongside experienced engineers in a collaborative environment. Key Responsibilities • Perform in-air and in-water acoustic and electrical testing, • Analyse test data and produce detailed reports, including findings and root cause analysis, • Use specialist laboratory equipment to measure sound pressure levels, frequency response, noise, and vibration, • Develop and execute test procedures to meet acoustic, electrical, and environmental standards, • Support and improve existing underwater acoustic products and calibration systems, • Communicate test results clearly to both technical and non-technical stakeholders, • Liaise with production teams to support acoustic processes and implement improvements, • Assist with prototype build, evaluation, and testing of new subsea transducer designs, • Knowledge of underwater acoustics and transducer fundamentals, • Strong problem-solving skills with excellent attention to detail, • Ability to analyse xrnqpay and interpret test data, • Clear written and verbal communication skills, • Practical mechanical engineering experience, including prototype assembly and testing, • Experience developing laboratory software or test tools, • Degree in Physics, Mathematics, or Engineering (BEng/BSc minimum or equivalent)

Service Technician Have you got what it takes to succeed The following information should be read carefully by all candidates. £28,000 - £38,000 per annum Based in Andover, Hampshire Full-time | Monday to Friday, 7am to 4pm with 30 minutes unpaid lunch break | 42.5 hours per week About the Company This organisation is a bold, forward-thinking manufacturer with a passion for excellence in product design, sales, and production. Over the past 12 years, the business has achieved significant growth in revenue and output, with ambitious plans in place to accelerate even further. The brand is widely recognised across the UK and Europe for its premium quality, exceptional performance, and unbeatable aftercare. With new product launches and continued investment in innovation, this is a fantastic time to join a business that's shaping the future of the Arboriculture industry. The Role You will be working in the workshop, servicing, diagnosing and repairing mechanical equipment. That includes strip-down, rebuild, fault-finding and getting loan equipment back out the door in good order. The work covers hydraulics, engines and electronics. You will be hands-on from day one. A second position is also available at a senior level (£40,000 to £45,000), which carries team leader responsibilities. If you have the experience and want a bit more ownership over how things run, that one may suit you better. What you will be doing: • Machine check-overs on loan equipment., • Nut and bolt strip-downs and full refurbishments., • Fault diagnosis and repair of broken machinery., • MIG welding as part of the repair process., • Strong mechanical knowledge with relevant qualifications or equivalent experience., • Experience working with plant, machinery or similar mechanical equipment., • Experience working in a workshop environment., • Strong attention to detail., • Highly organised and able to manage multiple tasks., • Practical, hands-on and solutions focused., • Strong work ethic and reliability., • Ability to work independently and as part of a team., • Positive attitude and willingness to learn. Your salary will reflect what you are actually capable of. If you perform well, you will progress. There is no fixed ceiling. xrnqpay Recruited by Outthere RPO Outthere RPO are an outsourced Employee Lifecycle company, helping businesses with all things HR, Recruitment and Neurodiversity. If you have experience as a Mechanical Fitter, Mechanical Technician, Workshop Technician, Workshop Foreman, Workshop Team Leader or Service Technician, or if you come from an automotive, agricultural or mechanical diagnostics background, we would love to hear from you.

Job Purpose Below covers everything you need to know about what this opportunity entails, as well as what is expected from applicants. Our client is a well-established engineering manufacturer, delivering high-quality, precision components to a range of industries including aerospace, defence and oil & gas This role involves carrying out operational tasks within your assigned area while supporting ongoing training and improvement initiatives. You will continuously build your knowledge of products and processes, taking responsibility for your work and contributing positively to the wider team. Key Responsibilities Support management at all levels in achieving business objectives Adhere to all Quality, Health & Safety, and Environmental standards Develop a strong understanding of all activities within your work area Maintain high standards of housekeeping across all workspaces Carry out any reasonable tasks requested by management New Product Introduction & Development Carry out hands-on tool assembly, inspections, trials, and testing Perform high-level inspections (CMM, ISIR, FAIRs) Support product development projects with technical input Train colleagues in rubber moulding processes Engage with customers where required Production Support Perform general engineering tasks including press builds, repairs, maintenance, and improvements Conduct inspections (CMM, ISIR, FAIRs) and provide training as needed Create work instructions and sales/inspection drawings Assist with production troubleshooting Take ownership of non-conformance investigations and implement corrective actions (CAPAs) Support training activities across the team Apply strong mechanical engineering knowledge Skills & Attributes Self-motivated with excellent timekeeping Strong team player with the ability to build professional relationships Flexible, enthusiastic, and positive in approach Committed to continuous learning and personal development Strong problem-solving skills with a focus on continuous improvement Benefits and hours 8-5 Monday to Thursday 8-3 Friday 30 min lunch (other breaks as required, IE if working in Production area, can take tea breaks, if in the office, cuppa at your desk) Standard company pension after 3 months Uniform supplied, obviously safety equipment Social Fund for events – Christmas Party, fully funded including partners and Taxis. xrnqpay 25 Days holiday, every 5 Years served, gets an additional day per year (Max of 3), also Holiday buy / sell scheme , up to 3 days either direction. Usual bank holiday

As a Production Technician, based in Hampshire, you will be working through day-to-day tasks as established by the Production Supervisor of the working area, and in accordance with the production plan, on the wiring and assembly of production jobs. My client, a prominent technology engineering firm,

The ideal candidate will have previous electrical and wiring experience in Assembly and/ or Production. Role Responsibilities:Wiring plugs and other electrical assembly.

A recruitment agency is searching for a skilled Production Specialist for a 6-month contract in Chandler's Ford, UK.The role involves building helicopter rotor trackers and testing products to ensure quality.Candidates should have over 2 years of experience in electro-mechanical assembly, along with

Production Specialist (Contract) Location: Eastleigh Duration: 6 months Rate: Up tp £45/hour - Umbrella Inside IR35 Our client seeks a skilled Production Specialist for contract work building helicopter rotor trackers, aircraft cables, and engine monitoring units at their Chandlers Ford facility. Focus: Safety, Quality, Delivery, Cost. Key Responsibilities: Hand soldering, crimping, PCB assembly per specs/drawings Test/inspect products to BoM standards Fault finding, rework/repair on PCBs Goods inspection, continuous improvement input Team collaboration and efficient operations Essential Skills (2+ years): Electro-mechanical assembly (soldering, wiring, crimping) Read schematics, wire diagrams, BoMs Identify electronic components (resistors etc) ESD procedures, basic PC skills (Word, Teams etc) Excellent manual dexterity Desirable: IPC610/620 certs, conformal coating, PCB repair, NVQ L3 Electrical Eng, QC experience Immediate start for right candidate. Apply with CV

You will like Marine mechanical/structural design engineering hybrid working from the vibrant city of Southampton with a fast-growing maritime technology company. This organisation is at the forefront of developing wind-assisted propulsion systems that significantly reduce fuel consumption and emissions, contributing to a more sustainable future. Working here means becoming a pivotal part of a passionate team dedicated to impactful climate solutions, in a company that values innovation, collaboration, and professional growth. Benefit from a flexible hybrid working environment, excellent benefits, and support for relocation and visas if required. You will like The Senior Design Engineer Mechanical/Structural role itself which offers a dynamic and hands-on opportunity. You will take ownership of the design and delivery of key subsystems, guiding projects from concept to manufacturing release. Your days will involve producing 3D models, detailed drawings, and calculations, as well as engaging with suppliers worldwide. This position combines technical leadership with practical engineering, providing you with broad exposure across the entire design lifecycle. You will be pivotal in driving manufacturability, cost-efficiency, and continuous improvement within a truly innovative environment. You will have To succeed as a Senior Design Engineer, you will have a healthy mix of the following: A degree in Mechanical, Structural, or Marine Engineering Between 5 and 10 years’ experience designing mechanical systems in a production environment Proven success in delivering designs from concept through to production, ideally within marine, wind, offshore sectors Strong proficiency in Siemens NX, Inventor, or equivalent 3D CAD tools Experience working with fabrication, welding, or large structural assemblies A solid understanding of Design for Manufacture and Assembly (DFMA) principles Track record of driving cost reduction and improving manufacturability Comfort working in a fast-paced, high-responsibility environment Knowledge of class or certification requirements such as DNV or LR Fluency in Mandarin is a bonus but not essential Desirable additional experience includes structural testing, validation, and manufacturing techniques. The right candidate will also demonstrate practical engineering acumen, attention to detail, creativity balanced with rigour, and a proactive mindset suited for a dynamic startup-style environment. You will get As a Senior Design Engineer, you will enjoy: A competitive salary between £55,000 and £75,000 plus excellent benefits Flexible working with a hybrid model, three days on-site per week in Southampton Opportunities for travel to a manufacturing plant in China and supplier visits, planned in advance Relocation support and visa sponsorship if needed Contribution to impactful climate-tech solutions within a forward-thinking environment Retention of ownership and influence over key subsystems, with room for professional growth Working alongside passionate engineers in a collaborative team focused on innovation and sustainability You can apply to the Senior Design Engineer position by clicking the button on this job posting or by sending your CV in confidence to . We look forward to helping you take your next career step within this inspiring and impactful organisation. UK_MS

Job Title: Skilled Fitters - Aerospace (Rib Cell) Contract: PAYE / Umbrella Shift: Early shift Shift: Earlies | Hours: 06:00-14:15 (Mon-Thu) | 06:00-12:00 (Fri) Rate: £30.56 Umbrella / £22.23 PAYE + holiday Due to the nature of the role, BPSS clearance is required; if clearance cannot be obtained, employment may not be possible or may be withdrawn on national security grounds. The Opportunity We're recruiting two Skilled Fitters to support the Rib Cell team within a leading aerospace organisation. This is a contract role working the Early shift, assembling and fitting precision aerospace structures to tight quality and compliance standards. Ideally, applicants will hold a Level 3 qualification in Mechanical Assembly and have prior experience in aviation or aerospace assembly. Key Responsibilities Assemble and fit rib cell aerospace components to specification Read and interpret engineering drawings and instructions Use hand tools and machinery safely and effectively Carry out quality checks and resolve fitting issues Maintain production flow through effective teamwork Keep work areas clean, organised and audit‑ready Work in full compliance with H&S and regulatory standards What You'll Need Proven aerospace fitting experience Strong ability to read and interpret technical drawings Excellent attention to detail and problem‑solving skills Competence using hand tools and relevant machinery Understanding of quality control processes Good communication and teamwork skills Commitment to safety and compliance Relevant trade qualifications or equivalent experience What's My Next Step? If you're an experienced aerospace fitter available for early shift contract work, apply now to be considered

Electro-Optic Test Operator x3 Job Summary The Electro-Optic Test Operator is responsible for testing, inspecting, and verifying products to ensure they meet performance, quality, and customer specifications. This role involves operating test equipment, analysing results, and documenting findings in a manufacturing or laboratory environment. Key Responsibilities Perform functional and performance testing of electro-optic assemblies and systems. Set up and operate electro-optic test equipment. Follow test procedures, work instructions, and engineering documentation. Inspect components for defects and verify alignment, focus, and calibration. Record test results accurately and complete required documentation. Identify test failures and create defect records. Communicate test results and issues to engineering and quality teams. Ensure compliance with safety, quality, and handling procedures (ESD, laser safety, cleanroom protocols if applicable) Maintain test equipment and report calibration or maintenance needs. Support continuous improvement and process optimisation initiatives.Qualifications & Experience Technical certificate or associated qualification preferred Experience in electronics, optics, or electro-mechanical testing preferred. Familiarity with optical and electronic measurement tools Use of Microsoft Office Software and SAP ERP Systems for data entry and reportingElectro-Optic Test Operator - Required Skills and Abilities Testing & Inspection Perform functional, performance, and acceptance testing of electro-optic components and systems as defined within Work Instructions and Test Specifications Set up, operate, and verify electro-optic test equipment (optical benches, lasers, cameras, detectors, power meters, oscilloscopes, etc.) Align, focus, and calibrate optical assemblies per specifications. Conduct visual inspections using microscopes and precision tools.Documentation & Reporting Follow approved test procedures, work instructions, and engineering documentation. Record test data accurately and complete test reports and logs where applicable. Identify non-conformances and document test failures (consulting with Engineers where required) Communicate results and issues to engineering, quality, or supervision.Troubleshooting & Support Assist engineers with root-cause investigations and corrective actions. Support qualification testing, and production validation where required.Quality & Compliance Ensure compliance with quality standards, customer requirements, and regulatory guidelines. Follow ESD, cleanroom, and laser safety procedures (where applicable) Handle sensitive optical components carefully to prevent damage or contamination.Equipment & Work Area Maintenance Maintain test equipment and workstations in proper working condition. Verify calibration status and report equipment issues or deviations. Maintain clean, organised, and safe test areas (5S)Continuous Improvement Participate in process improvement and efficiency initiatives. Provide feedback on test procedures and equipment effectiveness. Support cross-training and knowledge sharing within the team.Equipment & Materials Handling Operate and perform basic checks on assembly equipment (Process Checks as defined) Handle materials and components properly to prevent damage. Report equipment malfunctions or maintenance needs.Teamwork & Continuous Improvement Work effectively as part of a team to meet production goals. Participate in training, cross-training, and improvement activities. Suggest process improvements to enhance efficiency and quality. This role requires you to complete a Trades Test before we can submit your CV to the client. Only apply if you are willing to attend our Whiteley site to undertake this assessment

Job Purpose Our client is a well-established engineering manufacturer, delivering high-quality, precision components to a range of industries including aerospace, defence and oil & gas This role involves carrying out operational tasks within your assigned area while supporting ongoing training and improvement initiatives. You will continuously build your knowledge of products and processes, taking responsibility for your work and contributing positively to the wider team. Key Responsibilities Support management at all levels in achieving business objectives Adhere to all Quality, Health & Safety, and Environmental standards Develop a strong understanding of all activities within your work area Maintain high standards of housekeeping across all workspaces Carry out any reasonable tasks requested by management New Product Introduction & Development Carry out hands-on tool assembly, inspections, trials, and testing Perform high-level inspections (CMM, ISIR, FAIRs) Support product development projects with technical input Train colleagues in rubber moulding processes Engage with customers where required Production Support Perform general engineering tasks including press builds, repairs, maintenance, and improvements Conduct inspections (CMM, ISIR, FAIRs) and provide training as needed Create work instructions and sales/inspection drawings Assist with production troubleshooting Take ownership of non-conformance investigations and implement corrective actions (CAPAs) Support training activities across the team Apply strong mechanical engineering knowledge Skills & Attributes Self-motivated with excellent timekeeping Strong team player with the ability to build professional relationships Flexible, enthusiastic, and positive in approach Committed to continuous learning and personal development Strong problem-solving skills with a focus on continuous improvement Benefits and hours 8-5 Monday to Thursday 8-3 Friday 30 min lunch (other breaks as required, IE if working in Production area, can take tea breaks, if in the office, cuppa at your desk) Standard company pension after 3 months Uniform supplied, obviously safety equipment Social Fund for events – Christmas Party, fully funded including partners and Taxis. 25 Days holiday, every 5 Years served, gets an additional day per year (Max of 3), also Holiday buy / sell scheme , up to 3 days either direction. Usual bank holiday

Manufacturing Assembler Job Summary The Manufacturing Assembler will be responsible for the assembly, inspection, and process control of electronic or semiconductor devices to ensure products meet quality, reliability, and performance requirements in a manufacturing environment. Key Responsibilities Assemble parts and subassemblies using hand tools, fixtures, and equipment Follow work instructions, drawings, and standard operating procedures Meet production targets while maintaining quality standards Inspect assembled products for defects and ensure conformance to specifications Report quality issues, equipment problems, or material shortages Maintain a clean and organised work area (5S) Follow all safety policies and procedures Complete required production and quality documentation Support continuous improvement initiativesQualifications & Experience Prior manufacturing or assembly experience essential Ability to read basic drawings and work instructions Experience using hand tools and precision assembly equipmentSkills & Competencies Attention to detail and quality focus Manual dexterity and hand-eye coordination, with ability to manipulate extremely small parts with consistent accuracy Ability to work in a team environment Time management and reliabilityWork Environment & Physical Requirements Previous experience working in Manufacturing / Production working environment (Cleanroom & Temperature and Humidity Controlled) Ability to stand or sit for extended periods Repetitive motion and fine motor tasks may be required Manufacturing Assembly Operator - Roles & Responsibilities Assembly & Production Assemble components, subassemblies, and finished products according to work instructions and drawings Use hand tools, power tools, fixtures, and assembly equipment safely and correctly Meet production targets while maintaining quality standardsQuality Control Inspect parts and assemblies to ensure they meet specifications Identify, report, and help correct defects or non-conformances Follow quality procedures and documentation requirementsSafety & Compliance Follow all safety rules, procedures, and PPE requirements Handle ESD-Sensitive Devices following company ESD control procedures Maintain a safe, clean, and organised workstation (5S) Report safety hazards, incidents, or near missesDocumentation & Reporting Complete production records and maintain process checklists accurately Track quantities produced, scrap, and rework Communicate issues related to materials, equipment, or processes Ability to consult / Liaise with Engineering Teams on task requirements This role requires you to complete a Trades Test before we can submit your CV to the client. Only apply if you are willing to attend our Whiteley site to undertake this assessment

Our engineering client is currently looking for 2 x Manufacturing technicians to work at their Southampton site. This position will involve a range of test, assembly and calibration duties. You will also be responsible for customer returns and repairs. The suitable candidate will have PCB Assembly and soldering skills. The ideal candidate will be responsible for: • Calibration and repair tasks, • Take responsibility for meeting daily production targets, • Accurately interpret engineering drawings and wiring diagrams, • Apply correct labelling to products, • Actively support lean manufacturing Salary: £26,000p/a - £28,000p/a Hours: Monday - Friday 37.5hrs per week

Job Title: Mechanical Assembler - Manufacturing Workstations Location: Hedge End Job Type: Temporary Department: Manufacturing / Operations Pay: £13.41 per hour rising to £13.74 per hour after 12 weeks service Join Our Team! We're looking for a hands-on, detail-oriented Mechanical Assembler to join our manufacturing team. In this role, you'll be responsible for assembling and installing custom workstations, trolleys, racks, and other structures across our production lines. If you enjoy practical work, take pride in craftsmanship, and thrive in a team-oriented environment - we'd love to hear from you. What You'll Do: Assemble custom manufacturing workstations and associated structures (racks, trolleys, etc.) Cut and deburr pipe and other materials with precision Read and work from technical drawings to build structures to specification Support physical production line moves and general fitting work around the factory Deliver and install completed assemblies across the site What We're Looking For: Experience in manufacturing, mechanical assembly, workshop environments, machining, or fitting Ability to work accurately with tape measures, hand tools, and power tools Comfortable with physical work in a factory environment A team player with a strong work ethic and attention to detail Preferred Qualifications: Technical or mechanical qualifications (or equivalent hands-on experience) Personal Qualities: Diligent and focused, with pride in the quality of your work Reliable, self-motivated, and safety-conscious Hours: 37.5 hours per week between 7am and 4pm (Monday to Friday) This role is initially for 3-6 months but with a likelihood of extension

Manufacturing Assembler - High Dexterity Assembly Job Summary To perform highly precise manual assembly and finishing operations on small, delicate, or high-tolerance components where exceptional hand dexterity, steady control, and attention to microscopic detail are critical to product quality and safety. Key Responsibilities Assemble micro-scale or high-precision components using hand tools, tweezers, microscopes, or magnification systems Perform fine alignment, fitting, and adjustment of components within extremely tight tolerances Handle fragile materials (e.g. micro-electronics, thin wires, miniature fasteners, precision springs) without damage Conduct detailed visual inspections to identify defects not detectable by automated systems Execute repetitive, detail-intensive tasks while maintaining consistent quality over extended periods Follow exacting work instructions, schematics, and standard operating procedures Maintain cleanroom or controlled-environment discipline where required Accurately document assembly steps, quality checks, and deviations Collaborate with quality and engineering teams to resolve precision-related issuesRequired Skills & Abilities (Critical) Exceptional fine motor skills and hand-eye coordination Ability to manipulate extremely small parts with consistent accuracy Steady hands with minimal tremor under magnification High tactile sensitivity and spatial awareness Strong visual acuity (with or without corrective lenses) Ability to maintain focus on intricate tasks for long durations Superior attention to detail and error detection Patience and discipline in repetitive precision workPhysical & Cognitive Requirements Prolonged seated or static working positions Frequent use of fingers, hands, and wrists for delicate movements Ability to work under magnification or microscopes Strong concentration and mental stamina Ability to work at a controlled, methodical pace without rushingExperience & Background (Preferred) Previous work in precision manufacturing, micro-assembly, electronics, medical devices, jewellery, watchmaking, or similar fields Manufacturing / Production working environment (Cleanroom & Temperature and Humidity Controlled) Familiarity with precision hand tools and micro-assembly equipmentQuality & Performance Standards Zero-defect mindset with strict adherence to tolerance limits Consistent output quality across high-volume or high-complexity builds Compliance with safety, cleanliness, and quality regulationsIdeal Candidate Traits Naturally meticulous and detail-oriented Calm, steady, and methodical under pressure Takes pride in craftsmanship and precision Highly reliable and process-driven This role requires you to complete a Trades Test before we can submit your CV to the client. Only apply if you are willing to attend our Whiteley site to undertake this assessment

Responsibilities Include: • Own mechanical design and delivery osubsystems from concept through manufacturing release, • Produce 3D models, manufacturing drawings, and supporting calculations., • Own manufacturability and production readiness of assigned subsystems, ensuring designs are robust in real-world manufacturing environments, • Utilise manufacturing experience for continuous improvement of design standards, manufacturability, and cost., • Lead rapid resolution of design issues arising from manufacturing and supplier feedback to maintain delivery momentum, • Own engineering interface with international suppliers, ensuring timely resolution of issues and progress toward delivery, • Guide and review work from junior engineers to ensure quality and delivery of assigned work, • Champion professional standards of engineering integrity, safety, and sustainability within the team. Required Experience • Degree Qualified (Mechanical/Structural/Marine), • 5-10 years hands-on experience designing mechanical systems in a production environment, • Proven ability to deliver designs from concept to production in marine, wind, offshore or similar environments, • Proficiency in Siemens NX, Inventor (or equivalent 3D CAD), • Experience working with fabrication, welding, or large structural assemblies., • Strong understanding of Design for Manufacture and Assembly (DFMA) principles., • Proven experience driving cost-reductions to achieve targets. Comfortable working in highly dynamic environments with significant accountability

This is a fantastic opportunity for a Mechanical Engineer to join a world leader in advanced manufacturing technology. This is a global engineering powerhouse with decades of experience, and you’ll have the chance to work at a state-of-the-art manufacturing facility alongside a team of specialists within R&D. Role Overview You’ll be providing mechanical and opto-mechanical design support for an extensive product portfolio, involved in the creation and modification of CAD models to resolve issues across manufacturing, assembly and quality. Key responsibilities will include: Primary point of contact for the operations team, working alongside NPI and production departments, dealing with design-related production issues. Management/execution of engineering changes which may include obsolescence, suppler changes and quality updates Maintenance of BOM’s, and knowledge of FEA, thermal analysis and fluid dynamicsWhat are we looking for? Essential: Minimum 4 years’ experience within a mechanical design function, as part of hi-tech engineering and manufacturing business, working on a complex product range Degree or equivalent qualification in mechanical engineering Technical exposure to mechanical related tools, including 3D CAD, DFM and FEA analysisNice to have: Experience working on product through their entire lifecycle Specific industry experience within industrial laser systems, fibre-optics and electro-mechanical technology

Position: Assembly/Production Workers Location: Eastleigh Hours: 12 hours shift pattern (Days and Nights Monday to Sunday) Duration: 3 months with potential for extension Pay: £18.10 per hour (Depending on working hours) Our client, a growing company, is seeking candidates to join their assembly/production department. If you have prior experience in a manual environment and possess excellent attention to detail and dexterity, we encourage you to apply. Requirements: Previous experience in a manual environment (preferably manufacturing/production) Ability to work from specifications/drawings Capable of carrying out manual hand assembly duties Strong attention to detail Excellent dexterityResponsibilities: Perform manual hand assembly duties according to specifications/drawings Meet daily/weekly production targets Maintain quality standards and attention to detail Work efficiently within a team environmentThis is an excellent opportunity to join a dynamic team in a growing company. While the positions are initially temporary, there is a high likelihood of extension based on individual performance

Production Operative - Southampton This is a permanent, full-time opportunity based in Southampton, offering excellent pay, long-term stability, and career progression within a growing manufacturing environment. We provide full, comprehensive relocation support to ensure your move is as smooth and stress-free as possible. • Location: Southampton, • Salary: up to £30,000 pa + OT up to £6,200, • Role type: Permanent - RTW in the UK required, • Shifts: Monday - Wednesday: 06:00am - 4:30pm, Thursday: 06:00am - 4:00pm, Friday: 06:00am - 12:00pm (Overtime paid at x1.5) About the Role: We are currently recruiting Production Operatives to join a well-established and respected manufacturing business. This is a hands-on role working within a fast-paced production environment, offering the chance to develop your skills and progress your career. Benefits: • 4-day working week, • Weekly pay, • Full uniform and PPE provided, • Company pension, • Career progression opportunities, • Early Friday finish with overtime available, • Good transport links (bus stop nearby, walkable location) Duties: • Carry out assembly and production tasks using hand and power tools, • Work as part of a team to meet production targets, • Perform quality checks to ensure high standards are maintained, • Maintain a clean and organised work area, • Support different departments when required Requirements: • Previous experience in production or assembly work, • Experience using hand and power tools, • Ability to carry out manual, hands-on work This is your opportunity to join a high-performing team in a well-established and growing business. This job is based in Southampton. However, using our bespoke "Recruit and Relocate" solution, Workforce we can support those willing to relocate to the area to source accommodation near the site. If you are hardworking, have a great attitude, and are ready for a physical role, please submit your application today! Apply now

Panel Beater Location: Eastleigh Basic Salary: up to £55,000 Hours: 45 Hours Working Week Benefits: 33 Days Holiday, Staff benefits and incentives and many more Our Client is looking for a skilled and experienced Panel Beater / Panel Technician. This role is perfect for someone with ATA accreditation or NVQ Level 3 (or equivalent) who thrives in a fast-paced accident repair centre. You will be responsible for repairing damaged vehicles to manufacturer specifications using the latest tools and techniques. Key Responsibilities for Panel Beater / Panel Technician: Perform high-quality accident repairs, ensuring work meets manufacturer and customer standards Remove, repair, and replace damaged panels Use welding equipment, dent pullers, and filler techniques for panel repairs Align body panels and parts for assembly and ensure a perfect fit Work efficiently within a team to meet deadlines and production targets Maintain a clean, safe, and organized work environment Stay up to date with modern vehicle repair techniques and industry standards Skills and Qualifications for Panel Beater / Panel Technician: Recognised apprenticeship as a Panel Beater / Panel Technician or Vehicle Body Repair NVQ Level 3 / VCQ / SVQ / ATA accreditation or equivalent qualification Previous experience working as a Panel Beater / Panel Technician in a busy body shop Strong knowledge of modern repair techniques for minor and moderate crash repair Ability to work efficiently under pressure while maintaining high standards Self-motivated team player with a focus on customer satisfaction and bonus targets Click 'Apply Now' to take the next step in your career. INDBS

Manufacturing Assembly & Wirebonding Operator x3 Role Purpose The Manufacturing Assembly & Wirebonding Operator will be responsible for the assembly, wire bonding, inspection, and process control of electronic or semiconductor devices to ensure products meet quality, reliability, and performance requirements in a manufacturing environment. Key Responsibilities Assembly Assemble parts and subassemblies using hand tools, fixtures, and equipment Follow work instructions, drawings, and standard operating procedures Meet production targets while maintaining quality standards Inspect assembled products for defects and ensure conformance to specifications Report quality issues, equipment problems, or material shortages Maintain a clean and organised work area (5S) Follow all safety policies and procedures Complete required production and quality documentation Support continuous improvement initiativesWire Bonding Perform wire bonding operations (ball bond, wedge bond, or ribbon bond) using gold & palladium wire Set up and operate wire bond machines (manual or automatic) Optimise bonding parameters (force, power, time, loop height) Conduct bond pull, shear, and visual inspections Identify and troubleshoot wire bond defects (NSOP, lifted bonds, heel cracks, shorts)Qualifications & Experience Prior Wirebonding, Manufacturing and Assembly experience is essential Ability to read basic drawings and work instructions Experience using hand tools and precision assembly equipmentSkills & Competencies Attention to detail and quality focus Manual dexterity and hand-eye coordination, with ability to manipulate extremely small parts with consistent accuracy Ability to work in a team environment Time management and reliabilityWork Environment & Physical Requirements Manufacturing / Production working environment (Cleanroom & Temperature and Humidity Controlled) Ability to stand or sit for extended periods Repetitive motion and fine motor tasks may be requiredManufacturing Assembly Operator - Roles & Responsibilities Assembly & Production Assemble components, subassemblies, and finished products according to work instructions and drawings Use hand tools, power tools, fixtures, and assembly equipment safely and correctly Meet production targets while maintaining quality standardsQuality Control Inspect parts and assemblies to ensure they meet specifications Identify, report, and help correct defects or non-conformances Follow quality procedures and documentation requirementsSafety & Compliance Follow all safety rules, procedures, and PPE requirements Handle ESD-Sensitive Devices following company ESD control procedures Maintain a safe, clean, and organised workstation (5S) Report safety hazards, incidents, or near missesDocumentation & Reporting Complete production records and maintain process checklists accurately Track quantities produced, scrap, and rework Communicate issues related to materials, equipment, or processes Ability to consult / Liaise with Engineering Teams on task requirements This role requires you to complete a Trades Test before we can submit your CV to the client. Only apply if you are willing to attend our Whiteley site to undertake this assessment

We are currently recruiting for a Structural Design Engineer to join a leading marine manufacturing organisation based Hampshire. The successful candidate will become a key member of the structural engineering team, supporting yachts currently in build while also contributing to the design and development of new structural components and tooling. The role will involve working closely with production, design and quality teams to ensure structural designs are delivered accurately and efficiently, supporting both ongoing builds and future product development. This position offers the opportunity to work within a highly technical environment with involvement across design, structural analysis, production support and continuous improvement initiatives. Key Responsibilities Production Support Provide engineering support to the shop floor on yachts currently in build. Assist with drawing clarification and potential in-build design modifications. Attend production and project meetings to remain aligned with build progress and contract changes. Design & Engineering Produce 3D assembly models and production drawings for structural components and new product development using parametric modelling software (training provided). Design and develop tooling components with a focus on improving build repeatability and manufacturing accuracy. Deliver structural component designs from concept through to production, including calculations and detailed drawings for the shop floor. Structural Analysis & Testing Assist with first-principle structural calculations using internal tools and engineering spreadsheets. Support classification society structural calculations where required. Design material test samples, coordinate testing, and prepare technical reports on results. Quality & Continuous Improvement Review internal and independent yacht surveys and assist in the preparation of technical reports alongside the quality team. Contribute to ongoing improvements across manufacturing processes, structural design practices, and materials. Knowledge Understanding of composite construction materials including polyester, vinylester and epoxy. Knowledge of resin infusion techniques is advantageous. Understanding of yacht systems and marine structures. Interest in sailing and yacht design is desirable. Experience working with suppliers or managing supplier relationships is beneficial. Skills * Strong CAD and technical software skills, including: * AutoCAD * Parametric 3D modelling software (training provided) * Microsoft Office (Excel, Word, Outlook) * Strong analytical and problem-solving ability. * Excellent technical drawing and documentation skills. * Strong organisational skills and ability to manage deadlines. * High attention to detail. Experience Experience within a marine design consultancy or boatbuilding/manufacturing environment. Background supporting yacht production or composite structural design. Experience working within a production or manufacturing environment is desirable. Qualifications * Degree in Naval Architecture, Marine Engineering, Structural Engineering or similar. * Approximately 2–5 years’ experience in marine composite design. Personal Attributes Strong attention to detail. Professional and collaborative approach. Positive and proactive attitude. Reliable with good timekeeping. Willingness to travel to other UK sites when required. Benefits * 25 days annual leave per year * Employer pension contribution * Company sick pay scheme * Death in service benefit * Cycle to Work scheme * Employee Assistance Programme * Stable permanent role within a well-established marine manufacturing environment

This role sits at the interface between R&D and New Product Introduction, acting as the technical bridge that turns advanced concepts into manufacturable products. You will be central to identifying problems, developing practical solutions, and guiding complex laser systems from development into production. You will work on narrow-linewidth, high-power fibre laser systems, supporting system build, test definition and manufacturing readiness. The role involves close collaboration with multidisciplinary engineering teams and production, helping to uncover and resolve system-level challenges as products move towards volume manufacture. You will also work closely with an overseas engineering site, contributing to the scale-up of multiple product lines feeding into common end applications. You will need strong hands-on experience with fibre laser systems, a solid engineering foundation, and the ability to take ownership of technical challenges and drive them to resolution. You should be comfortable operating across development, manufacturing, and test environments, with a strong understanding of product development and system-level problem-solving. A degree in engineering or a related technical discipline is required; a PhD is welcome but not essential. This role would suit an optical, manufacturing, or process engineer who understands laser systems and the practical challenges of bringing advanced technology to production. This is a senior technical role with strong influence but no direct people management responsibility. You will be expected to lead debugging and build activities independently, mentor engineers and technicians where needed, and help triage issues to determine whether they are related to design, systems, or processes. The role includes defining and maintaining assembly and test documentation, supporting engineering change activity, and driving continuous improvement across product design, manufacturability and cost. Requirements: Strong, hands-on experience working with fibre laser systems in a development, manufacturing or test environment Proven ability to troubleshoot complex systems and bridge the gap between R&D and production Engineering degree (or equivalent experience) with a solid understanding of product development and manufacturing readiness

Job Title: Skilled Fitters - Airbus Assembly (Outer False Works) Contract: Contract Opportunity Shift: Earlies | Hours: 06:00-14:15 (Mon-Thu) | 06:00-12:00 (Fri) Rate: £30.56 Umbrella / £22.23 PAYE + holiday Due to the nature of the role, applicants must be eligible to live and work in the UK, adhere to ITAR restrictions, and be able to obtain Baseline Security Clearance (BPSS). The Opportunity We're recruiting an experienced Skilled Fitter to support Outer False Works on a major Airbus assembly programme. This role suits someone with strong precision engineering fundamentals, high standards of workmanship, and a willingness to learn within a specialist aerospace environment. Training is available for the right engineering background. Ideally, applicants will hold a Level 3 qualification in Mechanical Assembly and have prior experience in aviation or aerospace assembly. Key Responsibilities Precision fitting of aerospace structures within the Outer False Works area Drilling and countersinking operations Sealant application Working safely with jigs and fixtures Adhering to COSHH and aerospace quality requirements Maintaining an organised, compliant work area Supporting production flow through teamwork and reliability What You'll Need Strong precision engineering / fitting experience Ability to learn and adapt to specialist aerospace processes High standards of workmanship and attention to detail Methodical approach with the ability to take notes and avoid repeat errors Reliable, safety‑focused mindset What's My Next Step? If you're a skilled fitter with strong engineering fundamentals looking to work on Airbus structures, apply now to be considered

Production / Assembly Operatives Required ASAP. The role includes general assembly and production of the safety restraints. Any assembly experience would be advantageous but not essential.

A leading engineering firm in Staverton is seeking an experienced Production Manager to oversee manufacturing operations. Ideal candidates will have experience in managing production environments, knowledge of CAA regulations, and a commitment to continuous improvement.

We are currently looking for Production / assembly operative in high Wycombe and Amersham. Assembly work - Putting the seat belts together and other general assembly duties. Production work general production work.

My client is looking for ongoing Assembly staff, with good hand dexterity and attention to detail for immediate start.

A technical recruitment agency is seeking an experienced Assembly Technician to support operations in the aerospace sector.

Key Responsibilities Carrying out soldering and wiring tasks Completing basic mechanical assembly, including drilling and cutting aluminium Reading and interpreting technical drawings Performing cable wiring, crimping, and soldering Testing products and completing production inspections Working to

Production Operative – Final Assembly. Experience in a Manufacturing/Production Environment and electrical knowledge or previous assembly experience would be a distinct advantage but not essential as full training can be given to the right applicant. CARBOLITE GERO makes a significant contribution

A leading manufacturing company in the UK is seeking Production / Assembly Operatives to join their team. The role involves general assembly and production of safety restraints, with training provided for those with no experience.

Ideal candidates should have experience in a production environment, strong attention to detail, and good communication skills. A recruitment agency is seeking a Production Operative in Exeter, UK.

A leading manufacturer in the UK is seeking a Production Fitter to join their assembly team in Worksop. Candidates should have prior experience working in a production or manufacturing environment.

A recruitment agency is seeking a Production and Assembly Operative in Whitchurch, Hampshire.