Trabajos production assembly en EghamCrear alertas

Join Our Team as an Mechanical Technician Location: Slough- THIS IS A FIELD BASED ROLE AND WILL REQUIRE TRAVEL AROUND UK AIRPORTS. Contract Type: PermanentSalary: Up to £40k Working hours: Predominately Monday to Friday, some night works will be required accommodate the airport operation and project schedule. (08:00-17:00) or (20:00-05:00) Candidates must: • Have the RTW in the UK (no sponsorship required), • Be able to obtain an airside pass, • Have worked in the UK/have continuous references for the past 5 years, • Be able to obtain a DBS & clear criminal record, • Have a Full UK driving licence Mechanical Technician Carry out the mechanical assembly of Passenger Boarding Bridges and all associated mechanical elements, including cabins, rotundas, and lifting systems. Work must be performed in line with work orders, material lists, and engineering drawings, while complying with production planning, quality requirements, and safety protocols. The role is responsible for achieving complete and accurate assembly of the boarding bridge within planned timeframes and cost constraints, ensuring all technical specifications defined by the engineering department are met. Knowledge and Previous Experience Education / Qualifications • Intermediate or higher vocational training in mechanical installations, • Alternatively, a minimum of 4/5 years' experience in a similar mechanical assembly role Specific Knowledge and Skills • Ability to interpret mechanical drawings and material lists, • Strong product knowledge relevant to the assigned assembly section, • Safe handling of tools and mechanical equipment, including:, • Lifting platforms and ladders, • Counterweights and props, • Wheeled tools, • Textile and cable slings, • Electric welding equipment, • Grinders, • Self-propelled cranes, • Forklifts Desirable Knowledge and Skills • IPAF MEWP operator licence, • SSSTS certificate (Site Supervisor Safety Training Scheme), • Valid CSCS card Main Tasks and Activities • Install boarding bridge columns, • Complete cabin assembly in accordance with engineering drawings, • Assemble tunnels and correctly adjust telescopic sections, • Install lifting systems, • Assemble translation systems, • Assemble and cover the rotunda, • Install auxiliary equipment, • Conduct final assembly inspections in line with internal protocols, • Disassemble necessary walkway components for transportation Health and Safety • Knowledge of job-related risks and preventive measures, • Safe use and handling of equipment such as:, • Overhead cranes, • Forklifts, • Aerial work platforms, • Correct use, inspection, and maintenance of issued personal protective equipment (PPE), • Understanding of procedures to follow:, • In case of an accident Ready to Make an Impact? If you're excited about leading a team and driving successful installations in the import/export industry, we would love to hear from you! How to Apply: Send us your CV and a cover letter detailing your experience and why you would be a great fit for our team. Don't miss out on this fantastic opportunity to elevate your career with us! Application Deadline: Join us in shaping the future of engineering installations. Together, let's build something great! Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

Prototype Wire Person The successful Prototype Wire Person will focus on supporting the foundations between Engineering and Production, maintaining the high standard of quality, and ensuring the flow of work through Production, with the ability to write SOPS if required. Your dedication and expertise will be the driving force behind our success.Responsibilities: • Ability to solder, crimp, undertake mechanical assemblies and cable assemblies. All to be undertaken against the recognised company standards as laid down in IPC-A-610C., • Assemble mechanical and electromechanical components from engineering drawings, schematics, and work instructions, • Carry out prototype wiring, including crimping, soldering, cable routing, and harness assembly, • Build and modify prototypes in a fast-paced R&D environment, • Interpret wiring diagrams, technical drawings, and bills of materials (BOMs), • Perform rework and design changes as required during development stages, • Conduct basic inspection and testing., • Ensure all work meets quality standards, including IPC-A-610 and IPC-A-620., • Work closely with engineering teams to resolve build and design issues, • Maintain a clean, safe, and organised work area, • Work in accordance with Job Cards, Production/Development drawings, Test plans, Technical Instructions and Process documents.Requirements, • Ability to obtain UK security clearance, • Proven experience in wiring, cable assembly, or electromechanical assembly, • Ability to read and interpret technical drawings and wiring schematics, • Skilled in soldering, crimping, and general bench assembly, • Strong attention to detail and quality standards, • Good manual dexterity and practical skills, • Ability to work independently and within a team, • Desirable Skills, • Experience in prototype or R&D environments, • Familiarity with IPC-A-610 and/or IPC/WHMA-A-620 (training or certification beneficial), • Basic electrical testing knowledge (e.g., multi-meters, continuity testing), • Mechanical assembly experience (fasteners, torque settings, alignment), • Surface mount experience.Key details:, • Onsite based in Chertsey, • Salary negotiable DOE, • Candidates must be British with no dual nationality

Join Our Team as an Engineering Supervisor - Installations!Location: Slough- THIS IS A FIELD BASED ROLE AND WILL REQUIRE TRAVEL AROUND UK AIRPORTS.Contract Type: PermanentSalary: Up to £55k Working Pattern: Full Time Candidates must: • Have the RTW in the UK (no sponsorship required), • Be able to obtain an airside pass, • Have worked in the UK/have continuous references for the past 5 years, • Be able to obtain a DBS & clear criminal record, • Have a Full UK driving licence Job Description Execute and coordinate installation, maintenance, commissioning, and on-site technical support activities for Passenger Boarding Bridges (PBBs) at airports. Ensure all work complies with company technical standards, quality requirements, safety regulations, and airport rules. Communicate material needs on site, report transport-related damages, and manage incidents during installation to ensure full assembly of PBBs through to final client handover, meeting all project requirements and deadlines. Knowledge and Previous Experience Qualifications • Higher Vocational Training in a technical speciality Specific Knowledge • Technical knowledge of Passenger Boarding Bridges (PBBs), • In-depth understanding of product configuration and operation Desirable Knowledge and Skills • IPAF MEWP operator licence, • SSSTS certificate (Site Supervisor Safety Training Scheme), • Valid CSCS card Previous Experience • Minimum of 3 years' experience in a similar position within a capital goods manufacturing company with a comparable production process Main Tasks and Activities On-site Installation of Passenger Boarding Bridges (PBBs) • Perform and coordinate mechanical, electrical, and electronic assembly on site, • Participate in functionality testing, calibration, and commissioning, • Assess site resources and identify shortages (tools, materials, etc.), • Diagnose and resolve technical issues during installation or post-sales activities, • Supervise internal teams, contractors, and airport authorities to ensure progress, • Document completed activities and record any incidents, • Ensure compliance with safety procedures and airport regulations, • Propose technical and process improvements based on field experience Reporting • Submit daily reports of tasks performed, issues, and incidents to the Project Manager, • Report installation-related non-conformities (e.g. TQ2 assembly issues) Soft Competencies • Commitment to the organisation, • Teamwork and collaboration, • Strong problem-solving skills, • Focus on quality, reliability, and results, • High level of accuracy and organisation, • Attention to detail, • Flexibility and adaptability, • Strong commitment to safety Health, Safety, and Environment Competencies Environmental Responsibilities • Awareness of environmental aspects associated with the role and related controls, • Understanding of significant energy usage and operational controls, • Control of consumption (paper, water, energy), • Proper segregation of waste:, • Hazardous: toner cartridges, batteries, • Non-hazardous: paper, plastic Health and Safety • Knowledge of role-related risks and preventive measures, • Understanding procedures in case of accidents or emergencies, • Awareness of best preventive practices in office and site environments Why Us? At our company, we believe in creating a positive and engaging workplace where everyone's contributions matter. You'll be part of a team that celebrates successes and learns from challenges together. We are committed to fostering a culture of respect, collaboration, and professional growth. Ready to Make an Impact? If you're excited about leading a team and driving successful installations in the import/export industry, we would love to hear from you! How to Apply: Send us your CV and a cover letter detailing your experience and why you would be a great fit for our team. Don't miss out on this fantastic opportunity to elevate your career with us! Application Deadline: Join us in shaping the future of engineering installations. Together, let's build something great! Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

Senior Mechanical Designer Role Purpose To design and deliver mechanical system elements for complex motion control and test systems, producing full manufacturing packages including drawings, bills of materials and supporting documentation. The role requires technical ownership of assigned work packages, with responsibility for delivering designs on time, to specification and cost. Key Responsibilities • Design mechanical “system elements” such as actuators, manifolds, bearings and load cells, often adapting existing designs., • Produce complete manufacturing packages including GA drawings, detailed drawings, BOMs and associated data for procurement., • Act as Lead Engineer on allocated work packages, managing scope, priorities, progress and technical queries., • Ensure designs meet functional, regulatory and safety requirements (including UKCA / CE compliance)., • Apply Design for Manufacture, Assembly and Serviceability (DFMA)., • Support suppliers, production, service and project teams during build, test and commissioning phases as required., • Participate in and lead design reviews, contributing to continuous improvement and design standardisation., • Maintain project documentation including technical files and design trackers., • HND, Degree or equivalent experience in mechanical engineering., • Significant experience in mechanical design within a manufacturing environment, ideally involving hydraulic or precision mechanical systems., • Strong 3D CAD capability (SolidWorks preferred) and experience producing manufacturing drawings to relevant British Standards., • Working knowledge of GD&T, tolerance analysis and material selection., • Experience using MRP systems and managing BOMs., • Ability to perform basic stress analysis and technical problem solving. Salary will be commensurate with experience and skills.

Electrical Production & Prototype Wiring Technician Location: EghamReporting to: Electrical Production Engineer / Supervisor The Role We are seeking a skilled Electrical Production & Prototype Wiring Technician to join our client's production team. This is a hands-on role focused on the assembly, wiring, and testing of electrical control panels, enclosures, and interconnecting cables for special purpose equipment. You will be working to a high manufacturing standard, using electrical drawings and build procedures, and contributing to both prototype and production builds. Training will be provided where required. Occasional travel to customer sites may be necessary, and you will be expected to represent the company professionally at all times. Key Responsibilities • Day-to-day electro-mechanical wiring and assembly, • Build electrical sub-assemblies and complete systems to drawings and build procedures, • Read and interpret electrical and electronic schematics accurately, • Build electrical control panels and enclosures from scratch, including mechanical assembly, • Drill, tap, and install panel components such as relays, terminal blocks, power supplies, and other hardware, • Carry out high-quality crimping, soldering, wiring, looming, labelling, and cable assembly, • Assemble and terminate cable looms and harnesses using various connector types, • Inspect and test completed electrical assemblies, • Conduct final electrical / electronic inspection and complete associated documentation, • Support installation and commissioning activities at customer sites when required, • Maintain high standards of workmanship, accuracy, and attention to detail, • Proven experience in control panel wiring and machine wiring, • Strong practical electrical knowledge with the ability to read and work from schematics and engineering drawings, • High-standard crimping, soldering, terminating, and loom harness assembly experience, • Confident use of hand tools and measuring devices in a safe and competent manner, • Excellent hand-eye coordination and strong attention to detail, • Logical problem-solving skills and sound decision-making ability, • Able to work independently as well as collaboratively within a team, • A stable role within a respected international engineering company, • Interesting and varied work, including prototype and bespoke builds, • Training and development to support your role To apply: Please submit your CV and supporting information outlining your experience.

Senior Mechanical Design Engineer Egham Salary: £50,000 - £60,000 DOE We are seeking a Mechanical Design Engineer to join our client's engineering team, responsible for designing and delivering high-quality mechanical system elements for advanced simulation systems. This includes producing full manufacturing packages (GA drawings, detailed drawings, and BOMs) and supporting projects from concept through to production. You may also take ownership of projects as a Lead Engineer, managing timelines, coordinating stakeholders, and ensuring designs are delivered on time, to specification, and within budget.Key Responsibilities • Design mechanical assemblies and system elements (e.g. actuators, manifolds, bearings, load cells), • Produce detailed manufacturing drawings, BOMs, and hydraulic schematics, • Ensure compliance with relevant directives (e.g. CE/UKCA, Machinery & Pressure Equipment), • Apply Design for Manufacture and Assembly (DFMA) principles, • Conduct design reviews and support continuous improvement initiatives, • Maintain technical documentation and project trackers, • Support production, testing, and supplier queries, • Assist with risk assessments, manuals, and system builds when requiredSkills & Experience, • HND/Degree in Mechanical Engineering or 10+ years relevant experience, • Strong background in hydraulic/pneumatic systems or precision mechanical design, • Proficiency in 3D CAD (ideally SolidWorks), • Experience producing drawings to BS 8888, including GD&T and tolerance analysis, • Knowledge of manufacturing processes and cost-effective design, • Familiarity with MRP systems and Microsoft Office tools, • Practical engineering experience (e.g. heavy machinery, fabrication, pipework) desirable, • Willingness to travel internationally when requiredPersonal Attributes, • Strong attention to detail and “first-time-right” mindset, • Effective time management and ability to meet deadlines, • Proactive problem solver with a hands-on approach, • Strong communication and teamwork skills across departments, • Flexible and collaborative attitudeWhy Join Us?, • Work on innovative, bespoke engineering projects, • Be part of a globally respected organisation, • Opportunities for growth and project leadership, • 25 days holiday, increasing with length of service, • Flexible working, • Early finish on Friday's

Electrical Production, and Prototype Wiring Technician With a justifiably proud history stretching back to 1958, this globally recognised leader in hydraulic test and motion simulation systems develops innovative solutions to meet ever more demanding customer testing specifications Position Overview This is a hands-on role, and you will be part of the team that assembles and builds electrical control panels, enclosures, and interconnecting cables for special purpose equipment. The role requires attention to detail as well as knowledge and understanding of electrical / electronic components, terminations, crimping, cabling and the ability to work with wiring drawings / schematics and able to wire to a very high manufacturing standard. Training will be provided to cover specific needs of the role and where there is a need to support installation work at a customer’s site, the team member must be willing to travel and represent the company in a professional manner. Some of the responsibilities include: - The Prototype Wire Person shall be responsible for day-to-day Electro-Mechanical wiring, and assembly. Building sub-assemblies, and complete systems to drawings as per build procedures. Ability to read electrical / electronic drawings, and work accurately to electronic procedures. Build electrical control panel / enclosures from scratch including mechanical assembly. Drill, tap, and fit panel internal components such as relays, terminal blocks, and power supplies. Electrical crimping, soldering, wiring, and looming of control panel to a high standard. To assemble cables including cable crimping on various types of connectors, cable terminating, looming, and labelling to requirements. What will you need?? Experience of panel wiring and machine wiring. Demonstrable a basic electrical knowledge, and able to read, and work with schematics, and general engineering drawings. Able to wire control panels / boxes, including crimping, soldering to high standard, and terminating. Experience of electrical loom harnessing, and soldering to a high standard. Demonstrable ability to work both independently, and as part of the team. Conduct accurate logical decision making, and problem-solving skills.benefits include early finish on a Friday, 25 days holiday plsu annual pay raises. We look forward to seeing your CV!

An innovative engineering organisation is seeking a skilled Prototype Wire Person to support the development of cutting-edge electronic and mechanical systems. Working at the interface between Engineering and Production, you’ll play a key role in building, wiring, and modifying prototypes in a fast-paced R&D environment. This is a hands-on position suited to someone with strong practical skills and a passion for high-quality assembly work. Key Responsibilities • Carry out prototype wiring and cable assembly, including soldering, crimping, and harnessing, • Assemble mechanical and electromechanical components from drawings and schematics, • Interpret technical drawings, wiring diagrams, and bills of materials (BOMs), • Build and modify prototypes during development phases, • Perform rework and implement design changes as required, • Conduct basic inspection and testing (e.g. continuity checks), • Ensure all work meets quality standards (e.g. IPC-A-610 / IPC-A-620), • Collaborate with engineering teams to resolve build and design issues, • Maintain a clean, safe, and organised workspace, • Follow production documentation including job cards, test plans, and process instructions Essential Skills & Experience: • Proven experience in wiring, cable assembly, or electromechanical assembly, • Strong ability to read and interpret technical drawings and schematics, • Skilled in soldering, crimping, and bench assembly techniques, • High attention to detail and commitment to quality, • Good manual dexterity and practical problem-solving skills, • Able to work independently and as part of a team, • Experience in prototype or R&D environments, • Familiarity with IPC standards (IPC-A-610 / IPC/WHMA-A-620), • Basic electrical testing knowledge (e.g. multimeters, continuity testing), • Mechanical assembly experience (fasteners, torque, alignment), • Competitive salary and benefits package, • Paid overtime or time off in lieu, • Flexible working with core hours, • Generous holiday allowance plus seasonal shutdown, • Employer-matched pension scheme, • Private healthcare, • Ongoing training and development opportunities, • Salary sacrifice schemes (e.g. cycling, tech equipment), • Relocation support (where applicable) Why Join? You’ll be joining a collaborative, agile engineering environment where your work directly contributes to the development of advanced, real-world systems. The organisation offers exposure across the full product lifecycle and encourages continuous learning and progression. They are committed to diversity and inclusion and welcome applications from individuals of all backgrounds, including those currently underrepresented in engineering.

We are seeking an experienced Senior Mechanical Engineer to join a growing engineering team focused on the development of high-performance electromechanical and imaging-based products. This role will involve leading mechanical design activities from concept through to production. Key Responsibilities • Lead the mechanical design and development of complex products and assemblies from concept to manufacture, • Produce detailed 3D CAD models and technical drawings using SolidWorks, • Design for manufacture, including plastic injection moulding, machining, and assembly processes, • Perform thermal analysis and develop solutions for heat management in compact electronic systems, • Design and develop test jigs, fixtures, and rigs for validation and verification testing, • Collaborate with electronics engineers to support PCB integration, enclosure design, and cable management, • Support prototype builds, testing, and design iteration Required Skills & Experience • Degree in Mechanical Engineering or a related discipline, • Strong experience in 3D CAD design, ideally using SolidWorks, • Proven background in plastic injection moulding design and DFM principles, • Experience in thermal design and analysis of electronic/electromechanical systems, • Hands-on experience designing test jigs, fixtures, and rigs, • Good understanding of electronics integration, including PCB layout considerations and enclosure design, • Experience working with imaging systems, sensors, or embedded hardware Apply now or contact Gemma for more information

Injection Mould Toolmaker As an Injection Mould Toolmaker, you will be responsible for the manufacture, maintenance, modification, and repair of precision injection mould tools. You will work closely with design, production, and quality teams to ensure tooling performs efficiently and meets required standards. Key Responsibilities * Manufacture new injection mould tools from technical drawings and 3D models * Service, maintain, and repair existing mould tools * Diagnose and resolve tooling faults to minimise production downtime * Modify and improve tools to optimise performance and cycle times * Operate manual and CNC machinery including milling, turning, surface grinding, and EDM * Carry out bench fitting and tool assembly * Ensure all work is completed to high precision and quality standards * Adhere to health & safety procedures at all times Skills & Experience Required * Apprenticeship-trained Toolmaker or equivalent qualification * Proven experience in injection mould tooling * Strong understanding of mould tool construction and materials * Ability to read and interpret engineering drawings * Experience using precision measuring equipment * Good problem-solving skills and attention to detail * Ability to work independently and as part of a team Salary: £35,000...

Production Engineer The Production Engineer is responsible for optimising manufacturing processes, equipment, and systems to improve quality, efficiency, and cost. The role supports continuous improvement initiatives and new product introduction, working closely with operations, R&D, and production teams. Key responsibilities * Improving manufacturing processes * Analysing production data to resolve issues * Specifying and maintaining production equipment * Supporting ERP systems * Providing technical support and training to production staff. Skills Required * Engineering or technical degree or equivalent. * Minimum of 3 years industry experience in a similar role. * Knowledge of Manufacturing / Engineering processes, tools and techniques. * Experience in an assembly, sheet metal and machining environment. Package & Benefits Salary - £35,000-£40,000 Plus 5% profit related bonus 37 hours per week - 9:30 – 4:00 Monday to Thursday and 9:30 – 12:00 on a Friday...

Prototype Wire Person Location: Near Chertsey (commutable from Woking, Weybridge, Guildford, Staines) Salary: Up to £38,000 + Overtime / TOIL Hours: 37.5 hours per week (flexible working around core hours) Type: Permanent Interview Process: One-stage interview Start Date: ASAP This is a brilliant opportunity to join a specialist engineering business working on bespoke, cutting-edge electronic systems. You’ll be operating in a prototype / R&D environment, building high-spec wiring assemblies and playing a key role in bridging Engineering and Production. If you enjoy varied, hands-on work where no two builds are the same — this is one worth a look. Why join? * Work across the full engineering lifecycle (not just repeat production) * Flexible working hours around core times * Paid overtime or time off in lieu (up to ~24 extra days per year) * Strong pension (up to 14% total contribution) * Private medical cover * Ongoing training & development (IPC, technical upskilling, etc.) * Supportive, low-bureaucracy environment where your input actually matters Prototype Wire Person Duties * Prototype wiring, harness assembly, and cable routing * Wiring and terminating D-sub (D-type) connectors and cable assemblies * Soldering, crimping, and general bench assembly * Building electr...

PROTOTYPE WIRE TECHNICIAN CHERTSEY, UK (ONSITE) PERMANENT UP TO 39K PER ANNUM + OVERTIME + BENEFITS We are working with a well-established UK-based engineering and defence technology company that specialises in delivering advanced electronic and communication systems for mission-critical environments. With decades of expertise, they support global defence and security operations, offering end-to-end solutions from design and prototyping through to integration and support. We are looking for a hands-on Prototype Wire Technician to join a growing engineering team working on cutting-edge, bespoke technology. This is a fantastic opportunity to be involved in the full product development lifecycle, building and supporting high-quality prototype systems in a fast-paced R&D environment. Responsibilities: • Carrying out prototype wiring, including soldering, crimping, and cable assembly, • Building electrical and electromechanical assemblies from technical drawings and schematics, • Interpreting wiring diagrams, BOMs, and engineering instructions, • Supporting prototype builds, modifications, and design changes, • Conducting basic inspection and testing, • Ensuring all work meets quality standards (IPC-A-610 / IPC-A-620), • Working closely with engineering and production teams to resol...

• Security Clearance, • Prototype Wires, • DefencePROTOTYPE WIRE PERSONConfidential Client | Electronic & Mechanical Assembly | UK Security Clearance RequiredPermanent | Flexible Working | Excellent Benefits PackageAbout the Role Are you passionate about electronic and mechanical assembly? Do you want to work on cutting-edge, bespoke products in a collaborative and innovative environment? This is a fantastic opportunity to join a highly respected company operating within a specialist engineering sector — supporting the bridge between Engineering and Production. Reporting to the Senior Technician (Production Team Lead), you will play a pivotal role in maintaining quality standards and ensuring the smooth flow of work through Production. You will support prototype builds in a fast-paced R&D environment, with the scope to write SOPs as required.What You'll Do, • Undertake soldering, crimping, mechanical assemblies and cable assemblies to IPC-A-610C company standards, • Assemble mechanical and electromechanical components from engineering drawings, schematics, and work instructions, • Carry out prototype wiring, including crimping, cable routing, and harness assembly, • Build and modify prototypes in a fast-paced R&D environment, • Interpret wiring diagrams, technical drawings, and bills of materials (BOMs), • Perform r...

Job title: Wirer Location: Slough Pay rate: DOE Hours: Mon-Thurs 8am-4.30pm, Friday 8am-2.30pm – 38 hours per week Job type: Contract - initial 3 months About the Role of the wirerWe’re seeking a skilled Wirer to join a well-established and growing manufacturing company based in Slough. This is a fantastic opportunity to become part of a collaborative, fast-paced production team where quality and precision are at the heart of everything we do. You’ll be working on cutting-edge systems that require attention to detail and a passion for hands-on assembly work. Key Responsibilities Carry out wiring and basic mechanical/electrical assembly tasks Follow detailed work instructions and maintain high-quality standards Read and interpret engineering drawings accurately to ensure precisionWhat We’re Looking ForIf you have experience in wiring and assembly, a keen eye for detail, and enjoy working in a dynamic environment, we’d love to hear from you! This role offers stability, a supportive team, and the chance to work on exciting projects. To apply or learn more, please contact Alessandra at Orion Electrotech. Due to the high volume of applications, if you do not hear back within 5 working days, please consider your application unsuccessful. For more opportunities, visit our website. INDMAN...

Our client in the Defence & Security sector is looking for a skilled Prototype Technician to join their permanent team. The role involves combining electronic and mechanical assembly to create cutting-edge, bespoke products. You will bridge the gap between Engineering and Production, maintaining high-quality standards and streamlining production flow, with an ability to write SOPs if required. Reporting to the Senior Technician (Production Team Lead), you will play a pivotal role in shaping the future of our client's business. Key Responsibilities: * Ability to solder, crimp, undertake mechanical and cable assemblies in accordance with IPC-A-610C standards * Assemble mechanical and electromechanical components from engineering drawings, schematics, and work instructions * Carry out prototype wiring, including crimping, soldering, cable routing, and harness assembly * Build and modify prototypes in a fast-paced R&D environment * Interpret wiring diagrams, technical drawings, and bills of materials (BOMs) * Perform rework and design changes as required during development stages * Conduct basic inspection and testing * Work closely with engineering teams to resolve build and design issues Job Requirements: * Ability to obtain UK security clearance * Proven experience in wiring, cable assembly, or electromechanical assembly * Ab...

Your responsibilities will include: Precision hand soldering (through-hole components) PCB assembly and component placement Preparing kits and materials for production Reading and interpreting engineering drawings and schematics Monitoring your own work to ensure high quality and consistency Supp

Role: Assembler Location: Chertsey If you are interested in applying for this job, please make sure you meet the following requirements as listed below. Contract: 3 months (rolling possible) Pay Rate: £12.71 per hour We are currently looking for 2 Assemblers to join our team on a 3-month temporary contract, with the potential for extension depending on production requirements. xrnqpay You will be working on the production line, carrying out detailed assembly work to a high standard. This role requires accuracy, focus and con Please click on the apply button to read the full job description

The role involves precision hand soldering, PCB assembly, and working within a supportive team to maintain high-quality production standards.

Flexible start and finish times Key Responsibilities Product reintroduction and manufacturing transfer Tooling design and manufacture Sub-assembly and full product build support Manufacturing and assembly process development Creation of SOPs and work instructions Production engineering and continu

Assembly/Production Operatives. Assembly/Production Operatives.

Job Title: Electromechanical Assembly / Production Operative.Contract Type: Full-time, Monday to Friday.Working Hours: Flexible 8-hour shifts (Standard: 08:00 - 16:30).Industry: Engineering & Electronics Manufacturing.A great opportunity to join, a respected name in the electronic and electromechani

A respected name in manufacturing is seeking an Electromechanical Assembly / Production Operative in Egham.The role requires hands-on assembly, kit preparation, and adherence to quality standards.Ideal candidates will have experience in electromechanical assembly, skilled in hand soldering, and a ke

A well-established manufacturing company in Slough is seeking a skilled Wirer to join their production team.The ideal candidate will be experienced in wiring and assembly tasks, with a keen eye for detail.You will work on cutting-edge systems requiring precision and follow detailed work instructions

Electro-Mechanical Assembly Technician Near Chertsey (commutable from Woking, Weybridge, Guildford, Staines) Up to £38,000 + Overtime / TOIL 37.5 hours per week | Flexible working around core hours Permanent One-stage interview process Immediate start available This is an exciting opportunity to join a highly specialised engineering company developing bespoke, cutting-edge electronic systems. Working within a prototype and R&D environment, you’ll be involved in the build of high-specification wiring assemblies and play an important part in supporting both Engineering and Production teams. If you enjoy hands-on technical work, problem-solving, and varied builds where every project is different — this role offers a fantastic environment to develop your skills. Why join? • Work on varied prototype and development builds — not repetitive production work, • Flexible working hours around core times, • Paid overtime or time off in lieu (up to approximately 24 extra days per year), • Excellent pension contribution package (up to 14% combined contribution), • Private medical insurance, • Ongoing technical training and development opportunities (including IPC training), • Friendly, collaborative engineering environment where your ideas and input are valued Key Responsibilities • Building prototype wiring looms, harnesses, and cable assemblies, • Routing, wiring, and terminating D-sub (D-type) connectors, • Soldering, crimping, and carrying out detailed bench assembly work, • Assembling electro-mechanical products from engineering drawings and schematics, • Reading and interpreting wiring diagrams, schematics, BOMs, and technical drawings, • Supporting new product development and engineering change activities, • Carrying out modifications, rework, and updates during prototype stages, • Performing basic inspection and electrical checks, including continuity testing, • Working closely with engineers to resolve build issues and improve assembly processes, • Following technical instructions, build documentation, and test procedures What They’re Looking For Essential Skills & Experience • Previous experience in wiring, cable assembly, or electro-mechanical assembly, • Ability to read and understand schematic and wiring diagrams, • Experience wiring and terminating D-sub (D-type) connectors, • Strong soldering and crimping skills, • Excellent attention to detail and quality standards, • Good practical bench assembly skills Desirable Experience • IPC-A-610 and/or IPC-A-620 certification or experience, • Experience working in a prototype, R&D, or low-volume manufacturing environment, • Basic electrical testing experience using multimeters or continuity testing equipment, • Mechanical assembly experience Interested? Apply today to find out more about this opportunity, and a member of our team will be in touch

Manufacturing Engineer 8 month contract – Outside IR35 Immediate start Sunbury on Thames Our client are a leading manufacturer providing specialist solutions to a variety of industries such as aerospace, power generation, rail and oil and gas industries. They are looking for an experienced Manufacturing Engineer to join the team. Manufacturing Engineer Working across operations, supply chain and design engineering to provide manufacturing engineering expertise in supporting existing and new products, defining new and supporting existing processes. You will assist in the implementation of strategic Lean initiatives throughout the Company, leading some Continuous Improvement projects. Main Duties/Responsibilities Work with manufacturing cell leaders, lean co-ordinator and design engineering to improve process efficiencies Implement ‘Standard work’, generating & maintaining manufacturing documentation (SOP’s, Routings, “Visual Factory” displays) Creation & Maintenance of Routings in the MRP system Implement lean manufacturing methods (e.g. 1-piece flow lines, visual factory) to reduce throughput times, rework/scrap and work in progress Implement basic improvement tools, from 5S, 7 Wastes, Visual Management and Standardised Work balanced assembly lines where single (best) piece flow philosophies are employed Implement any required layout changes, ensuring both the facilities and maintenance teams are fully involved Support the Manufacturing Cells with their recording, and analysis of production data, and ensure the correct focus is placed on the main issues arising Initiate and / or lead improvement projects and CAPEX to enable new process and product introductions. Work with Engineering on product documentation modifications and parts obsolescence Provide day-to-day manufacturing engineering support for the production cells to enable customer schedule adherence (Fracas/concessions, change notes or MRB (material review board) Lead and work in teams to develop process FMEA, in their construction and implementation. Manage new product introductions and the manufacture of legacy products from release to production through the product life cycle. Mentor for cell leaders for improved methods of manufacturing assembly and test. Manufacturing Engineer Essential Skills/Experience/Qualifications; 5+ years experience within a manufacturing/engineering environment, ideally for the aerospace industry Previous experience of NPI Experience of implementing Standard Work processes Proven record of successfully implementing Lean in an industrial environment (either as a co-ordinator or as a leader) A proven track record of generating and maintaining process maps, PFMEA’s and control plans Strong knowledge of lean manufacturing principles Experience of using problem solving techniques (5 Why’s, Fishbone/Ishikawa diagrams, 8D) Significant technical & problem solving experience in an electro-mech. manufacturing environment. Good time management with a significant track record of planning / managing complex long term projects

Electrical Wireman Colnbrook, Slough, SL3 £18-24 per hour ( LTD/Umbrella) Proactive Global currently have an exciting opportunity for an experienced Electrical Wireman to begin work for a leading business in Colnbrook, Slough, SL3. The successful candidate will be responsible for wiring and assembling electrical components, rack builds and panel wiring, ensuring they meet the highest standards of quality and safety. Key Responsibilities of the Electrical Wireman: Must have previously held 18th Edition qualification / ECS card Prior experience as an assembler in an Electrical environment Previous experience with rack builds and panel wiring Able to do point to point wiring Expertise in crimping, cable making and harnesses Wirer must be capable of wiring and general assembly Must possess a good understanding of engineering drawings and be able to assemble products accordingly Skills and Qualifications of the Electrical Wireman: To wire, assemble and build products as requested Follow engineering diagrams and pick up on errors where applicable To be responsible for the quality of your production and assembly output To liaise with the Production Supervisor on current production targets, schedules and workload If you are interested in this position, please apply with a copy of your CV. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Jaya Tiwari on (phone number removed) or Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. Proactive Global t is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy

Electronics Assembly Technician (Soldering / PCB) Berkshire | Circa £25,500 + Benefits | Early Finish Fridays Looking for a stable electronics role with a better work-life balance? This is a great opportunity to join a well-established electronics manufacturer offering long-term stability, a clean working environment, and consistent hours. If you have soldering or PCB assembly experience and take pride in precision work, this role gives you the chance to work in a structured, quality-driven environment where your skills are genuinely valued. Why This Role Stands Out Early finish every Friday – more time for yourself Stable, long-term opportunity with a growing business Clean, organised, professional production environment Skilled work – not repetitive, low-level assembly Supportive team and well-run processes The Role You’ll be part of a specialist team responsible for electronics assembly and through-hole soldering, working to high-quality standards across a range of products. Your responsibilities will include: Precision hand soldering (through-hole components) PCB assembly and component placement Preparing kits and materials for production Reading and interpreting engineering drawings and schematics Monitoring your own work to ensure high quality and consistency Supporting inspection and general production tasks Using internal systems to track and process work What We’re Looking For Experience in electronics assembly, PCB work, or soldering Strong attention to detail and good manual dexterity Comfortable working with small, delicate components Ability to read technical drawings and follow processes A quality-focused, reliable approach to work A practical soldering test will be part of the interview process. Salary, Hours & Benefits Up to £25,500 (depending on experience) 37-hour working week Mon–Thurs: 07:30–16:00 Fri: 07:30–12:30 (early finish) 5 weeks holiday + bank holidays Pension scheme (employer contributions) Free on-site parking Apply Now If you’re an electronics assembler or soldering technician looking for a stable role with a strong team and better working hours, apply today

Senior PCB Designer Berkshire, Full time onsite. The Opportunity Our client is at the forefront of delivering advanced cryptographic and key management solutions that enable the secure exchange of mission‑critical information. Our technology supports customers operating at both tactical and strategic levels across security, aerospace and space domains. We are now seeking a Senior PCB Designer to play a key role in multiple concurrent research, development and production programmes, ranging from tens of thousands to several million pounds in value. Key Responsibilities Design and layout complex multi‑layer (4-20 layer) PCBs, including rigid, semi‑rigid and flex‑rigid designs Produce PCB layouts for analogue, RF, digital, power, high‑speed and high‑reliability circuits (DO‑254 where required) Apply security, EMC and TEMPEST design rules Incorporate DFT features and test points in collaboration with Production Test Work closely with electronic, mechanical, procurement and supply chain teams Liaise with PCB fabricators and assembly houses to meet DRC, DFM and DFT requirements Maintain and administer CAD libraries (symbols, footprints, databases) Participate in design reviews and contribute to bids, proposals and technical estimates Continuously improve tools, processes and PCB design best practices Required Skills & Experience Degree in Engineering, Science, Mathematics or equivalent experience Proven experience designing complex, high‑density PCBs Strong knowledge of IPC standards, routing guidelines and modern PCB design tools Experience with DFM/DFT implementation and supplier reviews Track record delivering multi‑layer, high‑speed, RF, analogue and power designs Desirable Signal integrity analysis experience Knowledge of power distribution and thermal design Gerber and ODB++ manipulation Altium or PADs layout and schematic capture Windchill or similar version control tools Client Benefits Every employee is critical to our success, and as such, we offer a range of flexible employee benefits, including: Participation in an Annual Bonus Scheme Private Medical Cover 25 days' holiday (plus Bank Holidays) with the option to buy an extra 5 days Pension Contribution 4 x Life Assurance Cover Flexible working hours with opportunity for a 1pm finish on a Friday Flexible benefits including cycle to work scheme, will writing and more Security Clearance Allowance - where relevant and subject to you holding the required security clearance

Panel Beater Location: Slough Basic Salary: up to £55,000 Plus Bonus Hours: 45 Hours Per Week / Monday to Friday only Benefits: Individual Time Saved Bonus, 30 Days Holiday, Flexible hours and more Our Client is looking for a skilled and experienced Panel Beater / Panel Technician. This role is perfect for someone with ATA accreditation or NVQ Level 3 (or equivalent) who thrives in a fast-paced accident repair centre. You will be responsible for repairing damaged vehicles to manufacturer specifications using the latest tools and techniques. Key Responsibilities for Panel Beater / Panel Technician: Perform high-quality accident repairs, ensuring work meets manufacturer and customer standards Remove, repair, and replace damaged panels Use welding equipment, dent pullers, and filler techniques for panel repairs Align body panels and parts for assembly and ensure a perfect fit Work efficiently within a team to meet deadlines and production targets Maintain a clean, safe, and organized work environment Stay up to date with modern vehicle repair techniques and industry standards Skills and Qualifications for Panel Beater / Panel Technician: Recognised apprenticeship as a Panel Beater / Panel Technician or Vehicle Body Repair NVQ Level 3 / VCQ / SVQ / ATA accreditation or equivalent qualification Previous experience working as a Panel Beater / Panel Technician in a busy body shop Strong knowledge of modern repair techniques for minor and moderate crash repair Ability to work efficiently under pressure while maintaining high standards Self-motivated team player with a focus on customer satisfaction and bonus targets Click 'Apply Now' to take the next step in your career. INDBS

html Our client in the Defence & Security sector is looking for a skilled Prototype Technician to join their permanent team. The role involves combining electronic and mechanical assembly to create cutting-edge, bespoke products. You will bridge the gap between Engineering and Production, maintaining high-quality standards and streamlining production flow, with an ability to write SOPs if required. Reporting to the Senior Technician (Production Team Lead), you will play a pivotal role in shaping the future of our client's business. Key Responsibilities: Ability to solder, crimp, undertake mechanical and cable assemblies in accordance with IPC-A-610C standards Assemble mechanical and electromechanical components from engineering drawings, schematics, and work instructions Carry out prototype wiring, including crimping, soldering, cable routing, and harness assembly Build and modify prototypes in a fast-paced R&D environment Interpret wiring diagrams, technical drawings, and bills of materials (BOMs) Perform rework and design changes as required during development stages Conduct basic inspection and testing Work closely with engineering teams to resolve build and design issues Job Requirements: Ability to obtain UK security clearance Proven experience in wiring, cable assembly, or electromechanical assembly Ability to read and interpret technical drawings and wiring schematics Skilled in soldering, crimping, and general bench assembly Strong attention to detail and quality standards Good manual dexterity and practical skills Ability to work independently and within a team Experience in prototype or R&D environments (desirable) Familiarity with IPC-A-610 and/or IPC/WHMA-A-620 standards (training or certification beneficial) Basic electrical testing knowledge (e.g., multi-meters, continuity testing) (desirable) Benefits: Full engineering lifecycle with optional career path: Choose the direction of your career Paid overtime or time off in lieu: Gain up to 24 additional paid days off per year or boost your salary with authorised single-time overtime Flexible working: Operate around the core working hours of 09:30 - 12:00 & 14:00 - 16:00 Role-specific allowances: Subject to individual projects and roles Holiday entitlement: 24 days per annum, plus public holidays, with a Christmas closedown for most roles Pension scheme: 14% total pension, with 7% contribution from the employer, matched with 7% from the employee Private medical care: Access to a network of 50+ private clinics and hospitals nationwide Training and upskilling: Opportunity to gain additional skills and qualifications Monthly Payment Schemes: Save money on a new bicycle and cycling accessories Company tech: Salary loans to purchase laptops, mobiles, and home office equipment Relocation package: Available to selected candidates needing to relocate If you are a talented individual with a passion for electronic and mechanical assembly, we would love to hear from you. Apply now to join our client's dynamic and innovative team in the Defence & Security sector

Manufacturing Engineer8-Month Contract Outside IR35 £40/hour Start ASAP We are looking for an experienced Manufacturing Engineer to support product reintroduction programmes within a precision engineering and advanced manufacturing environment. This is a hands-on role focused on transferring legacy products into new manufacturing environments, supporting tooling, assembly, process development, and production engineering activities. Contract Details 8-month contract Start ASAP Outside IR35 £40/hour Onsite 5 days per week 37.5 hours per week overtime available Flexible start and finish timesKey Responsibilities Product reintroduction and manufacturing transfer Tooling design and manufacture Sub-assembly and full product build support Manufacturing and assembly process development Creation of SOPs and work instructions Production engineering and continuous improvement activitiesWhat We’re Looking For Manufacturing Engineering experience within electromechanical environments Strong mechanical engineering background Tooling design and production engineering experience Assembly and process engineering expertise Experience creating SOPs and manufacturing documentation Product introduction or product reintroduction experience Precision engineering or complex electromechanical product experience Aerospace or advanced engineering background beneficialThis is an excellent opportunity to join a fast-paced engineering programme where you can make an immediate impact within a highly technical manufacturing environment

The primary purpose of the material handling role is to perform the electronic and physical movement of material from receiving goods inwards to issuing goods outwards in a safe and accurate manner. Key Responsibilities: Goods inwards Receive materials, reconcile goods to delivery note & book in. Ensure that items are appropriately protected and labelled accordingly. Put away materials in correct locations with care and attention. To process goods in a timely manner whist upholding quality standards to prevent a backlog.Goods outwards Accurately pick and transact any kitting requirements in a timely manner. Ensure that labels clearly identify the part, related work order or destination as appropriate. Liaise with production to ensure kits are delivered to the right destinations on time. Preparation and issuing of palletised and high-level assembly (HLA) goods to production.General Follow procedures that maintain stock accuracy with correct data entry for transactions. Transact and locate goods with a high level of accuracy and care to get right first time, every time. Perform cycle counting to maintain stock accuracy, reporting and investigating stock variations. Ensure parts 'returned to stock' (RTS) are accurately transacted and correctly located in stock. Maintain records of vendor consignment stock parts for auditing purposes. Provide support to other departments in the movement of material. Provide cover to the Packing team during absences and busy periods. Work on a rotating shift pattern in line with the rota notified to you by your Team Leader

Job Description Production Team Leader (Assembly) A great opportunity for an experienced Production Team Leader to supervise an assembly team within a fast-paced manufacturing environment, ensuring efficiency, quality control and continuous improvement. If youve also worked in the following roles,

A leading manufacturing company in the UK is seeking Production / Assembly Operatives to join their team. The role involves general assembly and production of safety restraints, with training provided for those with no experience.

Working as a Production Team Leader you will supervise assembly operatives, ensuring production processes run efficiently, targets are achieved and quality standards are maintained. Production Team Leader (Assembly). We have a fantastic new job opportunity for a Production Team Leader to join a busy

A growing UK manufacturing company is seeking a Production Operative for a hands-on role in Waverley, Surrey, offering £14 per hour on a temporary contract.

AWD online is seeking a Production Operative / Assembly Operative in Isleworth to join a busy manufacturing team. The role involves assembling high-quality products using hand tools, ensuring compliance with quality standards, and meeting production targets. Applicants should have previous manufactu

Production Assembly Operatives required ASAP. We are currently looking for Production / assembly operative in high Wycombe and Amersham. Assembly work - Putting the seat belts together and other general assembly duties.

An excellent opportunity for a hands-on Assembly Operative to join a fast-paced manufacturing environment, supporting production, quality control, and assembly line operations within a growing team. If you’ve also worked in the following roles, we’d also like to hear from you: Production Operati

A recruitment agency is seeking a Production Operative in Exeter, UK. Ideal candidates should have experience in a production environment, strong attention to detail, and good communication skills.

A leading engineering firm in Staverton is seeking an experienced Production Manager to oversee manufacturing operations. Ideal candidates will have experience in managing production environments, knowledge of CAA regulations, and a commitment to continuous improvement.

The Best Connection Group Limited is hiring full-time Assembly / Production Operatives in the Knutsford area.

A leading engineering firm in Woking seeks an experienced technician for hands-on production and assembly work.

Production / Assembly Operatives Required ASAP. The role includes general assembly and production of the safety restraints. Any assembly experience would be advantageous but not essential.

A global manufacturing company in the United Kingdom is seeking a Production Operator to manage production processes for Wire & Cable products.

Hunter Selection Limited is looking for a Production Supervisor in Hayes. You will lead a team of assembly operatives while being hands-on with machinery when necessary.

This part-time role involves supervising assembly operatives, ensuring production efficiency, and maintaining quality standards. A manufacturing company is seeking a Production Team Leader based in Heathrow, West London.