Safety engineer jobs in Plymouth - Page 2Create job alerts

TQR are working exclusively with a global Manufacturer based at their Plymouth site to recruit an experienced Process Engineer at their Plymouth site. As a key member of the Engineering function, the successful candidate will support safe, reliable, and efficient operation of the sites moulding and extrusion processes and associated equipment. The role combines technical problem solving with process optimisation, driving quality, repeatability, and productivity through robust process control, standardisation, and technical support. You will Work closely with Production, Maintenance, and Quality, and will lead technical initiatives that enhance first-time yield, reduce cycle time, minimise scrap by strengthening mould performance, improve process capability (CP/CPk) and advancing machine-setting practices. Key Responsibilities: Develop, document, and optimise moulding process parameters to achieve consistent quality and performance. Lead troubleshooting of process-related issues on moulding machines, tooling and auxiliary equipment, ensuring rapid root-cause identification and sustainable corrective actions. Support the introduction, commissioning, and validation of new moulds and tooling, ensuring correct set-up, safe handover, and adherence to the tooling commissioning process. Champion the use of scientific moulding techniques and data-driven decision making to enhance process robustness. Collaborate with Maintenance and the CI Lead to drive TPM activities focused on process capability and equipment uptime. Implement and support SMED activities to reduce changeover times and increase flexibility. Support the development and maintenance of process documentation (SOPs, setup sheets, validation reports). Provide technical training and coaching to setters and operators to build process understanding and ownership. Participate in trials, automation integration and continuous improvement projects that enhance quality, throughput, or cost efficiency. Support engineering change management and ensure process alignment with Quality and Validation standards. Promote a culture of right-first-time performance, teamwork, and continuous improvement. Essential Experience & Candidate Attributes Required: A minimum of a HNC (or equivalent) in a relevant engineering discipline. In the absence of this qualification a time served Process / Manufacturing Engineer may also be considered. Proven experience in moulding or extrusion process engineering (rubber, silicone, or plastic moulding environment). Strong understanding of moulding principles, tooling design, and machine control systems. Hands-on experience with process optimisation, validation, and troubleshooting techniques. Knowledge of TPM, SMED, Lean/CI principles and Six Sigma. Data-driven approach to problem-solving, comfortable using SPC, capability studies, and DOE where applicable. Effective communicator and team player, able to influence across departments and work collaboratively with production and maintenance teams. Methodical, safety-conscious, and resilient under pressure. This is a day shift position working Monday to Thursday 08:30 to 17:00 and Fridays 08:30 to 14:30. Please note, out client does not hold a skilled worker visa sponsorship licence, therefore it is essential that candidates must have the immediate right to work in the UK. If you are an experienced Process Engineer from a moulding background and are looking for a new challenge, please submit an up to date CV by using the apply button below. By applying for this position, you confirm that you consent to the processing of your personal data in accordance with the General Data Protection Regulation (GDPR) for the purposes of recruitment, employment and working finding service. TPBN1_UKTJ

Role: Mechanical Engineer Location: Plymouth - 2 days per week on-site Salary: £45,000 - £70,000 depending on experience Mechanical Engineers needed in Plymouth to join our client, an established engineering consultancy working on cutting edge systems within the marine industry. The Mechanical Engineering team work collaboratively with the Customer within the Mechanical and Building Services teams to provide technical support non-nuclear and nuclear mechanical assets and facilities. Positions are available at Junior, Senior and Lead Engineer level as we expand our capability, with responsibilities & salary offered commensurate to your level of experience. What the role of the Mechanical Engineer entails: Some of the main duties of the Mechanical Engineer will include: Scope, design and propose modifications to existing assets or new facilities based on customer needs and system limitations. Engage in the full lifecycle development of mechanical projects, from conceptual design through to implementation and maintenance. Engage directly with the customer to understand requirements and provide mechanical engineering support and attend Authorisation Group meetings. Periodic reviews of maintenance regimes and activities. Specifying replacement equipment/components and supporting the production of configuration documentation for permanent modifications. Maintaining configuration of technical drawings and documentation. Assessing and approving technical documentation prior to customer submission, ensuring technical, regulatory and safety considerations have been addressed. Liaise with multi-disciplinary teams and stakeholders to align mechanical support with broader infrastructure projects. Support the planning and execution of installation, commissioning and testing phases as needed. Provide technical input to project documentation, risk assessments and progress reporting. What experience you need to be the successful Mechanical Engineer: Foundation degree in Mechanical Engineering Relevant mechanical engineering experience in a highly regulated industry (e.g., nuclear, maritime, infrastructure, oil and gas etc. ). Knowledge and awareness of mechanical systems e.g. hydraulics, pumps, valves & pipework, LP & HP air systems, cooling & chiller systems Proficiency in understanding/production of mechanical engineering drawings Proficiency in understanding/production of hand calculations/Mechanical maintenance Experience in the design process and producing evidence of the design and substantiation of systems and components. Benefits: Up to 8% match pension, 25 days holiday, company health plan and more! Please note: Due to security restrictions we can only consider Sole UK Nationals for this position. This really is a fantastic opportunity for a Mechanical Engineer to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website

About The Role HomeServe are now recruiting for directly employed Water Supply Pipe Engineers to join our team! • Location - Plymouth • Full Time - 40 hours per week. T his includes some weekend, evening and bank holiday work • Salary - £33,220 - £37,810 (salary dependent upon experience). Plus a £1500 guaranteed bonus in your first year HomeServe offers an industry leading reward package to attract the best in our field: • Additional paid overtime • Fantastic pension scheme including Income Protection Cover • 33 days days annual leave (including bank holidays) with the option to buy, sell or carry over up to an additional week • Up to £2500 Smart Tech and Home Improvements salary sacrifices to shop at Ikea and Currys, spreading the cost over 12 months • Free HomeServe Cover 8 policy • Employee assistance programme looking out for you and your family • Company van with fuel card • Use of company tools, uniform and PPE • Access to our private award-winning training facility and our excellent team of field-based coaches to support your ongoing learning and development • Learning and development opportunities • Monthly breakfast meetings with your team to share best practices and keep in touch as well as monthly reviews with your line manager About the role: At HomeServe we put the customers' experience at the forefront of everything we do. As a Water Supply Pipe Engineer you will undertake the maintenance and repair work of water supply systems in our customers' homes. You will provide industry leading service and help us enhance our reputation, whilst driving customer growth. About You What you must have: • Experience repairing, laying and identifying leaks on water mains • Full UK Driving Licence with no more than 6 penalty points • Excellent customer service • Proactive, 'can do' attitude • Keen eye for detail and problem-solving skills At HomeServe you'll be part of an open, engaged culture where everyone has an equal voice and the opportunity to get involved, as well as make a real difference in our customers' lives. You'll work in a fun, friendly and inclusive environment where people understand the value of their contribution to our goals and are encouraged to recognise a job well done. Training & Support: To help you settle in to your career at HomeServe, you will undertake our extensive training programme. • Week 1 - You will attend our Head Office in Walsall Monday - Friday, where we will cover all things HomeServe, health and safety and provide you with your tools and equipment • Week 2 - You will be buddied up with an experienced HomeServe Water Supply Pipe Engineer Where geographically appropriate we will pay for your accommodation and meal allowance for your induction. The next steps: If you believe you are who we are looking forward for then click apply now! It's our people that truly make what we do so special. As part of the HomeServe family your job will be to put our customers first and we will give you everything you need to make this happen. About Us Not Specified TPBN1_UKTJ

Section Engineer Major Civil Engineering Project | Britain’s Ocean City The Opportunity We’re looking for an experienced Section Engineer to take ownership of a key work package on a flagship civil engineering scheme in Britain’s Ocean City. This is a nationally significant marine infrastructure project involving complex reinforced concrete and heavy civils works. It offers long-term security, technical challenge, and strong visibility — ideal for someone ready to step up and take real responsibility on a major scheme. If you’re looking to lead your own section and make a meaningful contribution to a landmark project, this is an opportunity worth serious consideration. The Business Our client is a leading civil engineering contractor with an established reputation across marine, water, environmental infrastructure, and energy sectors. They are recognised for delivering technically demanding projects to consistently high standards, maintaining strong client relationships, and securing repeat work across both public and private sectors. This is a performance-driven environment where expectations are high, with the support and structure in place to succeed. The Role As Section Engineer, you’ll take responsibility for the successful delivery of a defined section of works, acting as the key link between engineering teams, subcontractors, and senior management. You’ll lead the engineering function for your package, ensuring works are delivered safely, efficiently, and in line with programme and quality expectations. Key responsibilities include: Taking ownership of a designated section of works Managing and supporting Site Engineers, including mentoring and development Coordinating subcontractors and overseeing daily site activities Maintaining high standards of quality assurance and control Reviewing and interpreting engineering drawings Preparing and reviewing RAMS Supporting commercial discussions alongside Quantity Surveyors Monitoring programme progress and driving short-term planning Contributing to technical problem-solving on complex RC and marine works Upholding strong health & safety standards across your section This is a hands-on leadership role with clear accountability and real influence on project delivery. About You We’re looking for a capable and motivated Section Engineer with strong heavy civils experience. You’ll bring: Eligibility to obtain SC Security Clearance Experience as a Section Engineer or Senior Site Engineer on major civil engineering projects Strong background in reinforced concrete structures Marine or large-scale infrastructure experience (desirable) Strong understanding of engineering controls and quality-led delivery Excellent communication, coordination, and leadership skills HNC / HND / Degree in Civil Engineering or equivalent You’ll be proactive, organised, and confident taking ownership of performance across your section. What’s In It For You? Long-term opportunity on a major, high-profile infrastructure project Leadership responsibility on a nationally recognised scheme Exposure to complex and technically challenging works Competitive salary and benefits package Strong future project pipeline and career progression prospects Why This Role? If you’re a Section Engineer ready to step up, take ownership, and play a key role on a flagship marine civil engineering project, this is an outstanding chance to progress your career on a high-impact scheme. Interested? Apply now in confidence to find out more

Site Engineer / Section Engineer Location: Plymouth – (Candidates who are willing are lodge are welcome) Reporting to: Section Engineer / Sub Agent Working Hours: 45 hours per week, 07:30 – 17:00 Overall Purpose of the Role We are seeking an experienced Site Engineer to support the delivery of a major redevelopment project within a live, secure infrastructure environment in Plymouth. The successful candidate will assist with the technical compliance of works, ensuring that activities are delivered safely, on time, to specification and to the required quality standards. Due to the sensitive nature of the site, BPSS security clearance is required. Please note that this process can take up to 8 weeks. Eligibility criteria: Candidates must be born in a NATO or MISWG member country and have resided in the UK for the past 5 years. Key Responsibilities The Site Engineer will support the site team with engineering, quality, safety and technical delivery duties, including: Setting out works within allowable tolerances from provided site control. Checking setting out points, benchmarks, instruments and measuring equipment. Ensuring survey equipment is calibrated and calibration records are maintained. Assisting with the preparation of as-built drawings. Maintaining drawing registers and ensuring information is current and controlled. Supporting the development and maintenance of quality systems and project quality documentation. Assisting with the preparation, development and completion of quality check sheets. Carrying out quality checks, inspections and surveys. Supporting site safety, environmental and quality inspections. Completing daily diaries and keeping site trackers up to date. Recording and testing workmanship and materials, including drainage, concrete, piling, brickwork and reinforced concrete works. Providing engineering support to resolve technical issues and respond to technical queries. Ensuring the workforce understands setting out information and that it is suitable for the works being undertaken. Preparing sketches and technical information for site distribution. Supporting the procurement of site materials and equipment. Assisting in the review of progress against programme, quality, dimensions and quantities. Supporting the implementation of site safety, health and environmental procedures. Assisting with short-term planning, including six-week lookaheads. Supporting constructability reviews and planning documentation for heavy reinforced concrete works. Assisting with the review and production of Temporary Works Design briefs. Supporting reinforced concrete, formwork, falsework and temporary works activities. This job description is not exhaustive. From time to time, the successful candidate may be required to carry out additional duties within their capability, with training and support provided where required. Essential Requirements Civil engineering or construction-related qualification, such as HNC, BSc, MSc, BEng or MEng. Experience working as a Site Engineer on civil engineering or infrastructure projects. Experience with reinforced concrete structures and system formwork. Strong setting out and surveying experience. Familiarity with Leica survey equipment, including GPS, total stations, optical levels and digital levels. Understanding of reinforcement detailing, sequencing and construction. Experience with formwork and falsework. Temporary works experience, particularly within reinforced concrete works. Experience reviewing and producing Temporary Works Design briefs. Ability to assist with RAMS and quality documentation. Familiarity with quality management systems. Awareness of commercial processes. Good IT skills. Strong organisational skills and the ability to work within a site team. Proven ability to manage work safely, accurately and to programme. Flexible approach to working weekends or out-of-hours shifts on a rota basis, where required. Certifications and Tickets CSCS Card – White PQP/AQP, Red Trainee or Red Provisional. SSSTS. Supervisor HSE test. Desirable Requirements TWS or TWC certification. First Aid at Work. Experience developing ITPs. Experience in groundworks, earthworks and reinforced concrete. Nuclear or secure-site experience. Working towards Chartership or Incorporation with ICE, IStructE or another relevant professional body

Senior Continuous Improvement Engineer Plymouth, Devon £44,000 -£49,000 per annum, DOE + Bonus + 33 Days Holiday + Pension + Life Assurance + Health Cash Plan + Training & Development + Free Onsite Parking Are you an experienced in continuous improvement within the engineering/manufacturing sector looking to join a well-established manufacturing company. This company are a highly respected and well-established manufacturing organisation based in Plymouth, with a global presence and a reputation for delivering high-quality engineering solutions to some of the world's leading technology companies. Due to continued growth, they are now looking for a Senior Process Engineer to take ownership of key manufacturing processes within their Sheet Metal department. In this role, you will lead new product introductions (NPI), drive continuous improvement initiatives, and support day-to-day production to ensure world-class manufacturing standards are achieved. You will play a pivotal role in optimising processes, improving efficiency, and embedding a culture of continuous improvement across the site. This role would suit a proactive and solutions-focused engineer with strong leadership skills and a passion for process optimisation, looking to make a real impact within a forward-thinking organisation. The Role: Own and develop manufacturing processes within the Sheet Metal department, including NPI and continuous improvement initiatives using lean principles Improve productivity, reduce waste, and enhance product quality Provide day-to-day production support, ensuring efficient material flow, tooling, and equipment performance Deliver projects on time and within budget, maintaining high standards of health & safety and quality Collaborate with cross-functional teams including Engineering, Quality, Production, Maintenance, and Supply Chain Support and coach junior engineers, promoting a culture of continuous improvement and development Monday to Friday, 39 hours per week Yearly bonus, monthly performance related bonus, company pension matched up to 5%, 3x life insurance, 33 days annual leave (including bank holidays) plus holiday purchasing schemeThe Person: Engineering degree, lean business improvements and / or similar qualification desirable Proven experience in a senior engineering engineering role Strong background in sheet metal manufacturing, including welding and jig design Experience in NPI, process optimisation, project delivery, and lean manufacturing (TPM, OEE, CI) Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further opportunities, please click "Apply Now" or contact Sophie Fox at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Abatec is recruiting for a freelance Site Engineer to join one of the largest and most high-profile Civil Engineering projects in the South West, joining an award-winning, tier-one contractor that has secured exciting, challenging and long-term work ahead. The successful candidate will have previous experience working in a similar role on major civil engineering or infrastructure projects. As Site Engineer you will: • Have a minimum of 1–2 years’ experience in setting out on civil engineering schemes, • Carry out setting out duties using robotic total stations and GPS equipment, • Check drawings and quantities, ensuring accuracy of calculations and site information, • Assist in the preparation of as-built drawings and maintain accurate site records, • Maintain drawing registers, site diaries, and trackers, • Provide engineering support to resolve technical queries on site Our client requires a Site Engineer with: • Degree qualification in Civil Engineering or equivalent (desirable), • CSCS Card, • Experience in reinforced concrete works (essential), • A good understanding of construction health & safety and quality management systems, • Strong communication and organisational skills Additional Information: • Due to the sensitive nature of the site, BPSS and SC security clearance will be required (this process can take several weeks), • Candidates must have resided in the UK for the past 5 years and hold a passport from a NATO or MISWG member country Salary and benefits include: • £350 - £430 p/day PAYE Umbrella If you would like more information, or to apply for this vacancy, please contact Lloyd Barham on (phone number removed). The reference for this vacancy is (phone number removed). We are always looking for candidates for similar positions, so please register your details with us to hear about similar opportunities that you may be interested in. Abatec Ltd. is working as an employment business on behalf of a client

Resident Engineer (Structural/Civils) Rate: £45 - £55 p/h Umbrella PAYE (inside IR35) Location: Devenport Dockyard 3 days per week, 2 days remote Duration: 12-months + Our client is a leading engineering and design consultancy who require a Resident Engineer to support on a project at Devenport Dockyard. Overview: Ensure the delivery of site Quality by managing, providing advice and support, and witnessing the installation and commissioning process through construction works in the submarine refit complex. Primary focus will be Electrical activity. You will be accountable to the Lead Construction Manager for day-to-day planning matters. You will assist the construction and Project team by providing advice and communicating with contractors and relevant internal stakeholders to resolve site issues/ Technical Queries during construction in line with contract timescales. You will ensure the contractor adheres to the Scope of works and Change requests. You will undertake and record inspections to ensure adherence to scope and integrated test plans. Experience: You should be degree qualified and or Charted in a relevant discipline. You must have safely executed relevant Construction works in the past and have an understanding of the Nuclear industry and the impact of works against an extant safety case. You shall have awareness of CDM, construction practices and health and safety legislation. You should have experience delivering within the nuclear licenced site boundary. You should be able to demonstrate effective stakeholder management and understands the importance of integrated team delivery. Experience in delivering NEC contracts For more information on this role, please contact Scarlet Wilson. TPBN1_UKTJ

Interaction Engineering Design Engineer (AutoCAD / SolidWorks About the Role We are looking for a skilled and motivated Design Engineer to join our team. This role combines office-based design work with hands-on site involvement, giving you the opportunity to see your designs come to life. You will be responsible for designing structural solutions and supporting projects across the local area. Key Responsibilities Create detailed 2D and 3D designs using AutoCAD and/or SolidWorks Design and develop structural components and systems Attend site visits to take measurements, assess conditions, and support installations Work closely with project managers, contractors, and clients Modify and improve designs based on site requirements and feedback Ensure all designs meet industry standards and safety regulations Requirements Experience using AutoCAD and/or SolidWorks Background in structural design or engineering Ability to read and interpret technical drawings Comfortable working both in an office and on-site environments Strong problem-solving skills and attention to detail Good communication and teamwork abilities Full UK driving licence (preferred) Desirable Skills Experience with structural steel, frameworks, or building systems Knowledge of local construction standards and regulations Previous site experience What We Offer Competitive salary (based on experience) Opportunity to work on varied local projects Mix of practical and design-based work Supportive and growing team environment How to Apply: Please send your CV and a brief cover note outlining your experience and suitability for the role. INDTE

Fire and Security Engineer South Devon and Cornwall Mobile £40k Company van with personal use Holidays and Sick pay Are you a Fire and Security Engineer based in South Devon and currently open to a new role working for one of the UKS leading service providers. This company specialise in the Facilities service and maintenance to various commercial properties across the South Devon and Cornwall region, due to a new contract win they are now recruiting a Fire and Security Engineer to join their team. As Fire and Security Engineer you will be responsible for the following tasks To carry out Fire, Security, CCTV Planned Maintenance (PPMs), Reactive works with additional capability to assist with M&E repairs and support with minor Fire, Security and CCTV projects to a high level standard in accordance with the SFG20 or manufacturers recommendations. Key Responsibilities PPM in adherence to set NSI & BAFE standards. All in accordance with the Health & Safety at Work Act requirement and to company safety procedures and contract specification. Respond to Reactive Works to include all Mechanical & Electrical and minor fabric issues. Adhere to the out of hours call out rota (as required). Correct and timely completion of paperwork according to company policy and procedure. Provide engineering condition reports and quotations. Logbook auditing. Good customer interface skills. Demonstrate competence in all areas of your primary trade (with valid certification) Delivery of service excellence Reasonable understanding and a proactive approach to the following other trade Hold Fire Alarm, CCTV and Security certification for maintenance and testing requirements Qualifications Minimum of trade qualifications in Fire and Security Systems & Electrical competencies. For further information on the role and the company you will be working for please APPLY NOW or get in touch with Rhymel Henderson for a confidential chat

Electrical Engineer - Senior / Principal (Building Services) Location: Plymouth / Exeter Employment Type: Permanent Overview A global engineering and infrastructure consultancy is strengthening its Electrical Building Services capability across Exeter and Plymouth, supporting delivery of complex, high-value and technically demanding projects. The role sits within a building services team, delivering large-scale infrastructure schemes across defence, transport, healthcare, justice, commercial and public sector environments. A significant proportion of workload is within secure defence and critical national infrastructure, requiring robust technical leadership and design assurance. Key Responsibilities Lead electrical building services design across all RIBA stages (0–7) Act as technical lead for LV systems including power distribution, lighting, fire alarms, life safety systems, standby power and UPS systems Produce, review and approve electrical design deliverables including calculations, specifications and drawings Provide technical governance and ensure compliance with UK regulations, CIBSE guidance and internal standards Coordinate multi-disciplinary engineering teams across complex projects Attend and lead client, stakeholder and design team meetings Support project delivery across secure and defence environments where applicable Mentor and develop junior and intermediate engineers Contribute to digital design, BIM coordination and technical innovation Requirements Degree qualified in Electrical Engineering or Building Services Engineering Significant consultancy experience in building services design Proven ability to deliver complex UK construction projects Strong technical knowledge of electrical systems design and coordination Chartered Engineer or working towards (required for Principal level) Experience in defence, secure estates or critical infrastructure advantageous Strong Revit / BIM capability beneficial Benefits Work on nationally significant defence and infrastructure projects Clear progression to Associate and leadership levels Hybrid and flexible working arrangements Strong global technical network and multidisciplinary support Long-term pipeline of secured major programmes If you're interested, please contact Conner Richards at RGB Recruitment – (url removed)

TQR are working exclusively with a global Manufacturer based at their Plymouth site to recruit an experienced Electrical Maintenance Engineer on static night shift due to a vast increase in their order book. Reporting to the Maintenance Team Leader, the successful candidate will play a critical hands‑on role in ensuring the safe, reliable, and efficient operation of all machinery on site. The position is responsible for both reactive and planned maintenance, first‑fix repairs, and accurate CMMS documentation. Working closely with the Maintenance Team Leader & Production Team Leaders, the successful candidate will contribute to asset uptime, quality performance, and continuous improvement. Key Responsibilities: Safety & Compliance: * Complete all maintenance tasks in line with site safety procedures, risk assessments, permit‑to‑work policies and legal requirements. * Perform dynamic risk assessments prior to each job; escalate hazards where required. * Maintain tidy, safe work areas using a clean‑as‑you‑go and 5S approach. Reactive & Corrective Maintenance: * Respond promptly to equipment breakdowns across manufacturing and site services, ensuring permanent and robust fixes. * Communicate findings, actions taken, and follow‑up needs to the Maintenance Team Leader. * Support root cause analysis (RCA) and contribute technical insights to CI initiatives. Planned Preventative Maintenance: * Execute PPM tasks as scheduled, ensuring quality completion within timeframes. * Identify and report defects, trends, or improvement needs during PPM routines. * Support continuous improvement of PPM routines to enhance asset reliability. CMMS & Data Integrity: * Accurately record defect details, actions taken, fault codes, and parts used. * Ensure data quality is suitable for analysis by the Engineering team. * Support improvements in CMMS usage and standardisation. Technical Support & Expertise: * Apply strong electrical, mechanical, pneumatic, and hydraulic skills to diagnose complex issues. * Provide technical support for installation, commissioning, and acceptance testing (FAT) of new equipment. * Act as a technical reference point for colleagues and apprentices. Cross-Functional Collaboration: * Work with Production, Quality, and Engineering teams to ensure efficient factory operation. * Communicate issues, progress, and solutions through formal and informal meetings. * Build strong relationships to support uptime, quality, and safety goals. Electrical Maintenance & Fault‑Finding: * Lead on electrical diagnostics and permanent fault resolution across injection moulding machinery, drives, safety circuits, and ancillary equipment. * Support electrical installations and carry out fault‑finding on electrical facility systems, ensuring safe, compliant, and reliable operation of site services and building infrastructure. * Act as the primary point of contact for electrical breakdowns requiring in‑depth analysis. Essential Experience & Candidate Attributes Required: Proven experience working as an Electrical Maintenance Engineer gained from either manufacturing or engineering. ONC / NVQ Level 3 / HNC or equivalent in Electrical Engineering. Completed Apprenticeship in Electrical Engineering. 18th Edition. C&G 2391. Strong fault finding experience on Electrical Systems. Understanding of H&S regulations and safe systems of work. Experience with CMMS platforms. Competence with pneumatics, hydraulics, variable speed drives. Knowledge of RCA tools (5 Whys, fishbone, etc.) Strong problem‑solving mindset with structured approach. Effective communicator able to articulate technical findings to non‑technical colleagues. Proactive and self‑motivated, with a drive for continuous improvement. Calm and methodical under pressure. Team player who collaborates across functions. The successful candidate will work static night shift comprising of Monday to Friday 22:00 to 06:00 however there may be a requirement for you to train on weekly shift rotation of Monday to Friday 06:00 to 14:00 and Monday to Friday 14:00 to 22:00 for the first couple of months prior to starting work on night shift. If you are an experienced Electrical Maintenance Engineer, can commit to a static night shift and are looking for a new challenge, please submit an up to date CV by using the ‘apply’ button below. By applying for this position, you confirm that you consent to the processing of your personal data in accordance with the General Data Protection Regulation (GDPR) for the purposes of recruitment, employment and working finding service

An experienced Quality Engineer who has strong experience within Quality tools like 8D, investigations, FMEAs PPAP and SPC is required for a large and reputable Manufacturing business based in Plymouth. Our client is able to offer a long term and progressive career within a Multi-National organisation. Main Duties: To actively support the implementation, maintenance, performance and improvements of the quality management system by applying appropriate quality tools and techniques. To provide training and support and to overcome barriers to quality improvement. To work independently and as a team in conducting quality engineering activities. To identify performance trends and potential and actual non-compliance in products and processes through data gathering, analysis, monitoring and auditing. To work in line with Quality, Safety & environmental policies, procedures and work instructions. Conduct root cause analysis and implement corrective ad preventative actions. Decision making, Able to stop production, drive containment actions and take corrective or preventative measures, to ensure effective and timely defect management. Carry out audits, inspections, measurements and test in a timely and effective manner. Propose and implement robust and cost-effective solutions and improvements within Quality. Evaluate and recommend new technologies and tools within quality engineering. Develop relationships within all departments, suppliers and customers. Control process control. Customer performance monitoring and reporting. Process data, trends and issues. APQP Support with NPI Projects. Customer PAPP. Gather information and report giving feedback. Document control. Internal process and system audits. Education: Minimum of BTEC Ideally a HNC in Engineering/Science Experience of Quality Tools (8D, FMEAs, PPAP and SPC) Computer Literate & Excellent communication skills Ideally Lean trained Experience within a Precision Engineering environment Minium of ISO9001 Ideally 14001 & 45001 Audit experience Ideally have working Lean knowledge within Six Sigma. TPBN1_UKTJ

TQR are working exclusively with a global Manufacturer based at their Plymouth site to recruit an experienced Electrical Maintenance Engineer on static night shift due to a vast increase in their order book. Reporting to the Maintenance Team Leader, the successful candidate will play a critical hands-on role in ensuring the safe, reliable, and efficient operation of all machinery on site. The position is responsible for both reactive and planned maintenance, first-fix repairs, and accurate CMMS documentation. Working closely with the Maintenance Team Leader & Production Team Leaders, the successful candidate will contribute to asset uptime, quality performance, and continuous improvement. Key Responsibilities: Safety & Compliance: Complete all maintenance tasks in line with site safety procedures, risk assessments, permit-to-work policies and legal requirements. Perform dynamic risk assessments prior to each job; escalate hazards where required. Maintain tidy, safe work areas using a clean-as-you-go and 5S approach. Reactive & Corrective Maintenance: Respond promptly to equipment breakdowns across manufacturing and site services, ensuring permanent and robust fixes. Communicate findings, actions taken, and follow-up needs to the Maintenance Team Leader. Support root cause analysis (RCA) and contribute technical insights to CI initiatives. Planned Preventative Maintenance: Execute PPM tasks as scheduled, ensuring quality completion within timeframes. Identify and report defects, trends, or improvement needs during PPM routines. Support continuous improvement of PPM routines to enhance asset reliability. CMMS & Data Integrity: Accurately record defect details, actions taken, fault codes, and parts used. Ensure data quality is suitable for analysis by the Engineering team. Support improvements in CMMS usage and standardisation. Technical Support & Expertise: Apply strong electrical, mechanical, pneumatic, and hydraulic skills to diagnose complex issues. Provide technical support for installation, commissioning, and acceptance testing (FAT) of new equipment. Act as a technical reference point for colleagues and apprentices. Cross-Functional Collaboration: Work with Production, Quality, and Engineering teams to ensure efficient factory operation. Communicate issues, progress, and solutions through formal and informal meetings. Build strong relationships to support uptime, quality, and safety goals. Electrical Maintenance & Fault-Finding: Lead on electrical diagnostics and permanent fault resolution across injection moulding machinery, drives, safety circuits, and ancillary equipment. Support electrical installations and carry out fault-finding on electrical facility systems, ensuring safe, compliant, and reliable operation of site services and building infrastructure. Act as the primary point of contact for electrical breakdowns requiring in-depth analysis. Essential Experience & Candidate Attributes Required: Proven experience working as an Electrical Maintenance Engineer gained from either manufacturing or engineering. ONC / NVQ Level 3 / HNC or equivalent in Electrical Engineering. Completed Apprenticeship in Electrical Engineering. 18th Edition. C&G 2391. Strong fault finding experience on Electrical Systems. Understanding of H&S regulations and safe systems of work. Experience with CMMS platforms. Competence with pneumatics, hydraulics, variable speed drives. Knowledge of RCA tools (5 Whys, fishbone, etc.) Strong problem-solving mindset with structured approach. Effective communicator able to articulate technical findings to non-technical colleagues. Proactive and self-motivated, with a drive for continuous improvement. Calm and methodical under pressure. Team player who collaborates across functions. The successful candidate will work static night shift comprising of Monday to Friday 22:00 to 06:00 however there may be a requirement for you to train on weekly shift rotation of Monday to Friday 06:00 to 14:00 and Monday to Friday 14:00 to 22:00 for the first couple of months prior to starting work on night shift. If you are an experienced Electrical Maintenance Engineer, can commit to a static night shift and are looking for a new challenge, please submit an up to date CV by using the apply button below. By applying for this position, you confirm that you consent to the processing of your personal data in accordance with the General Data Protection Regulation (GDPR) for the purposes of recruitment, employment and working finding service. TPBN1_UKTJ

Civil Engineer Lead Plymouth(Hybrid) Virtual interview Mon–Fri Certain Advantage is partnering with a key client to recruit Civil Engineer Leads to provide technical support for non-nuclear and nuclear assets within the Devonport site. Projects include refurbishments, new developments, and listed building compliance. You’ll help scope, develop, and deliver engineering solutions that meet operational, safety, and regulatory standards. What will you be doing? Advise on construction matters and contribute across RIBA stages Produce drawings, specifications, and technical reports Liaise with stakeholders, design teams, and statutory bodies Arrange site investigations and condition surveys Design structural alterations and small-scale new works A couple of things you should know: Proven delivery from RIBA stages 3–5 Skilled in Revit/BIM Level 2 and engineering drawings Verification experience up to Category 2 Strong communication and adaptability During an interview, you may be asked about: Your experience in nuclear, Defence, or marine environments Environmental compliance and asset lifecycle support CDE/data delivery platforms Sounds like you? Apply now or WhatsApp/ring Lukas - (phone number removed) / (phone number removed) Working with Certain Advantage We go the extra mile to match top talent with the right opportunities. Whether you're looking to make a big impact or take the next step in your career, we’re here to support you. We work with businesses across the UK in Engineering, IT, Finance, and Marketing. If this role isn’t for you, visit (url removed) to sign up for job alerts and career advice

About The Role HomeServe are now recruiting for directly employed Plumbing Engineers to join our team! • Location - Plymouth • Full Time - 40 hours per week. T his includes some weekend, evening and bank holiday work • Salary - £36,720 - £40,120 (salary dependent upon experience). Plus a £1500 guaranteed bonus in your first year HomeServe offers an industry leading reward package to attract the best in our field: • Additional paid overtime • Fantastic pension scheme including Income Protection Cover • 33 days days annual leave (including bank holidays) with the option to buy, sell or carry over up to an additional week • Up to £2500 Smart Tech and Home Improvements salary sacrifices to shop at Ikea and Currys, spreading the cost over 12 months • Free HomeServe Cover 8 policy • Employee assistance programme looking out for you and your family • Company van with fuel card • Use of company tools, uniform and PPE • Access to our private award-winning training facility and our excellent team of field-based coaches to support your ongoing learning and development • Learning and development opportunities • Monthly breakfast meetings with your team to share best practices and keep in touch as well as monthly reviews with your line manager About the role: At HomeServe we put the customers' experience at the forefront of everything we do. As a Plumbing Engineer you will undertake the maintenance and repair work of plumbing systems in our customers' homes. You will provide industry leading service and help us enhance our reputation, whilst driving customer growth. About You What you must have: • Level 2 in Plumbing (if successful, copies of your certificates must be provided) • 1st and 2nd fix plumbing experience • Experience working as a plumber in domestic housing • Full UK Driving Licence with no more than 6 penalty points • Excellent customer service • Proactive, 'can do' attitude • Keen eye for detail and problem-solving skills At HomeServe you'll be part of an open, engaged culture where everyone has an equal voice and the opportunity to get involved, as well as make a real difference in our customers' lives. You'll work in a fun, friendly and inclusive environment where people understand the value of their contribution to our goals and are encouraged to recognise a job well done. Training & Support: To help you settle in to your career at HomeServe, you will undertake our extensive training programme. • Week 1 - You will attend our Head Office in Walsall Monday - Friday, where we will cover all things HomeServe, health and safety and provide you with your tools and equipment • Week 2 - You will be buddied up with an experienced HomeServe Plumbing Engineer Where geographically appropriate we will pay for your accommodation and meal allowance for your induction. The next steps: If you believe you are who we are looking forward for then click apply now! It's our people that truly make what we do so special. As part of the HomeServe family your job will be to put our customers first and we will give you everything you need to make this happen. About Us Not Specified TPBN1_UKTJ

Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in afriendly, fun and respectful environment where you are encouraged to thrive. Where will you be working? At M Group Energy, were enabling the energy essential to support our lives. We provide an end-to-end service, delivering solutions in electricity transmission, distribution, renewable energy, EV, metering and home decarbonisation. This role will be within ourMetering team, youll join the leading provider of metering services in the UK energy retail sector, we provide efficient and flexible services for gas, electricity and water meters. Want to come and be a part of it? Whats in it for you? Salary: Dual Fuel - £39,033 Dual Fuel (3 phase/CT) - £40,117 We offer a range of benefits designed to support your life in and out of work, some of which include; £2000 per year safety and attendance bonus, split payment every 6 months Company sick pay You'll have access to an uncapped additional productivity related bonus Are you 3phase and/or Medium Pressure qualified? That'll be £1000 added to your salary once authorised! Regular overtime paid is available to you at time and a half and double time on Sundays Looking for progression? 87% of our field managers have been promoted from DF engineers Company van/vehicle and fuel card for business use Recommend a friend get rewarded for introducing people to us! Standby / Overtime / Call out 22 days plus bank holiday, rising to 25 days with service In addition, this role offers; Matched or contributory pension scheme Online GP service, 24 hours a day, 365 days a year Employee assistance programme My Rewards portal, access to 1000s of retail discounts Life assurance Cycle to work, salary finance and give as you earn schemes Enhanced maternity, paternity leave and adoption leave Reward and recognition scheme What will you be doing? As a Smart Metering Engineer, you'll be exchanging traditional meters for smart, along with responding to emergency and maintenance appointments on behalf ofE.ON NEXT, ensuring customers Smart Meters are working correctly. Our smart metering partnership with E.ON NEXT is in its twelfth year, built on continuous high performance, resulting in multiple contract extensions Customer service is our top priority. You'll make sure that all jobs are completed on time and our customers are explained the benefits and safe usage of their new smart meter. Do you enjoy working on your own,chatting to customers and meeting new people? As part of your day, you'll be completing the installation and ensuring the ongoing maintenance of smart meters in our customers homes. You will be doing around 5 jobs per day. Do you want to make some extra money? There's an uncapped bonus for any extra jobs you complete too. You'll be travelling around your area using your tablet to see your jobs for the day. Like to plan ahead? You will have access to your schedule up to 2 weeks in advance. You'll also be provided with continuous training to maintain and develop your skills. Do you want to know a fun fact? 83% of our field management team have been internally promoted up from an Engineer. Are you looking for longevity in your career? You can have it with M Group Energy. You'll have health and safety at the heart of everything you do! Do you want extra training to make sure your knowledge is up to scratch? Your onboarding journey will make sure you are prepped and ready to be an ambassador for health and safety! Worried the role could be lonely? You'll be on weekly meetings, catch ups and our Field Managers are always there to come out and offer a helping hand or assistance. No day is the same, and you'll be given endless opportunities to shine. What youll bring Valid UK driving licence You must have held your licence for 1 year and have less that 6 points. Do you have a CCN1 / CMA1 / CMA3 all with MET1, or hold an NVQ Level 2 in Smart Metering Dual Fuel?Are you experiences installing gas and electric smart meters? Have you gotprevious MOCOPA experience to a multi rate level? If you have the below qualifications and skills, great, but you dont need them to apply; Bonus qualifications such as REGT1 (Medium Pressure) and 3 phase Ideally have been registered on the EUSR portal About us We want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. We are one of the Top 100 UK companies actively supporting and recruiting army veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs. Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. Were responsible and go further for our people, clients, communities and the planet Were open and seek new and better ways of exceeding expectations Were together and as one team; the whole is greater than the sum of the parts Were ambitious and embrace opportunity, to lead essential infrastructure services for life Whether youre a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development. Its an exceptional time to be a part of M Group. Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered. For certain roles, successful candidates will be subject to 3rdparty background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding. #MGroupE INDDF TPBN1_UKTJ

BAM UK & Ireland's Infrastructure Segment are currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking an experienced Site Engineer to assist the Engineer in managing the technical compliance of the project to the design specification in order to fulfil the assigned project (or section) safely, on time and to the required quality. Due to the site being a high-security military naval base, additional security checks will be required a BPSS level of security clearance is necessary. These checks can take up to 8 weeks to process. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports and have been a UK residence for the last 5 years can be considered for this role. Making Possible As a Site Engineer, you will be responsible for the following: Assist in the preparation of as-built drawings. Assist in establishing effective systems to record work completed updating the Project Quality Plan accordingly. To assist in managing systems to enable the progress of work to be reviewed against time, quality, dimensions, and quantity. Assist in the recording and testing of workmanship and materials, i.e., drainage, concrete, piling, brickwork etc. Assist in providing engineering support to ensure technical problems are overcome and technical queries are answered. Responsible for setting out works constructed within allowable tolerances. Regularly checking the setting out points and benchmarks and checking that all setting out instruments and measuring equipment are delivered to site with a calibration certificate and recorded accordingly. Completing Daily Diaries. Ensures workforce understand setting out information has been identified as suitable for the type of work being carried out. Assist in the preparation of sketches for distribution on site, ensuring clear communication channels are in place for effective understanding. To be aware of the provisions of the Kier Safety, Health, and Environmental Management System and to assist in its implementation to ensure a safe working environment. Responsible for providing and maintaining setting out and dimensional control, to ensure accurate construction of the work. Record instructions. Maintain drawing register. What do you bring to the role? A degree qualification in civil engineering or equivalent is desirable one or more of: BSc, BA, BEng, Meng, Eng, Tech, MICE, TIStructE, LCIBSE, LCIBSEEng Tech, Completion of Higher Apprenticeship. May be working towards Chartership/Incorporation with IStructE, ICE or other appropriate professional body. Familiar in Leica Survey equipment (GPS, Total Station, Optical & digital levels) for Setting Out & Survey Experience in similar role. Awareness of commercial processes. Familiar with Quality Management System and familiar in writing RAMS. Desirable: TWS or TWC First Aid at Work SSSTS Developing ITPs Experience in Groundworks, Earthworks & Reinforced Concrete Nuclear experience Whats in it for you? Competitive salary A wide range of family-friendly policies Company car/car allowance/travel allowance 8 % matched pension contributions Private healthcare Life assurance 26 days holiday 2 wellbeing days 1 volunteering day Personal and professional development About BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. BAM is committed to ensuring a fully inclusive recruitment and onboarding process, so if at anytime you feel you may need any reasonable adjustments, do not hesitate to speak with one of our team, and we will do our best to support you. TPBN1_UKTJ

Role : Principal Civil/Structural Engineer Location : Devonport(Occasional site visit) Duration : 12 months(Long term - project goes until Dec 2028) Inside IR35 The role We are looking for a Principal Civil/Structural Engineer ?to support delivery of civil/structural subway systems as part of the subways Team in Devonport. Lead on the Structural / Civil works required for: Refurbishment design proposals for the existing extant subways within the 10D site. Development of new / alternative designs. Lead the design team with assessing the findings of recent condition surveys, within the extant subways, and develop a strategy / design for the remediation of these subways. This will need to be coordinated with existing utilities and proposed to ensure that all design requirements are met Day-to-day, you'll be supporting the engineering capability of the new systems through the design lifecycle in accordance with the design process. Key responsibilities will include: Lead and manage one or more technical design packages ensuring requirements are met through the design process Provide technical design guidance and review of sub-contract design to ensure compliance with specifications, technical regulations and standards Collaboration across engineering functions and stakeholders to integrate designs within the overall facility layout and manage interfaces Maintaining the engineering configuration of the design intent (change control) Essential experience: Design of high complex services subways/routes preferably in a Nuclear/ Regulated environment Regulations, legislation and standards that are applicable to civil/structural design and construction (including Principal Designer responsibilities under CDM) Substantiation of SFR's when identified within systems to support the nuclear safety case Able to demonstrate relevant knowledge and skills required in the technical management of complex design development throughout the design lifecycle. Provide expert advice to the sub-contracted design houses to enable them to develop the design. Sound understanding of engineering design and safety practice as relevant to discipline, post and project requirements. Experience of working in BIM environments. Awareness of project planning, project management and budgeting. Sound understanding of company and departmental procedures relating to Design, Health & Safety and Quality requirements and ability to manage projects in accordance with these procedures. Collaborate with other design houses regarding the proposed works and the required changes to the subways to facilitate their designs. Support development and lead implementation of assurance and governance activities for subway remedial works and new design development Qualifications Degree in Civil/Structural Engineering. Chartered Engineer with membership of an accredited body (i.e. ICE) or working towards chartered status. Or significant experience. Due to the nature of the work carried out at our client's site, these roles are subject to specific nationality requirements and are only open to sole British citizens. Candidates who meet this criterion will also be required to undergo security clearance vetting. TPBN1_UKTJ

Fit Out Engineer / Mechanical Engineer – Precision Manufacturing Location: Plymouth, Devon Salary £32K - 35K Plus Overtime Type: Temp To Perm - 3 Month Contract Hours of work: Monday – Thursday 07:00 – 17:00 Shift: Day shift, 38 hours What’s on Offer • Work in a clean, modern production environment, • Long-term programmes with stability, • Contract and permanent options, • Competitive pay rates or salaries, • Professional recruitment support throughout, • Temp to Perm opportunity (3 Month Contract), • Overtime Plus weekends and Bank holidays The Role We are recruiting Fit Out Engineers / Mechanical Engineers to support the assembly and installation of complex mechanical and electromechanical systems within a high-quality manufacturing environment. These roles suit engineers who value precision, cleanliness and quality of finish, and who enjoy working with integrated mechanical systems rather than rough or repetitive production work. Key Responsibilities • Mechanical installation and assembly of complex systems, • Working with power transmission, gearing and driveline components, • Installation of hydraulic and fluid systems, • Precision fitting to engineering drawings and specifications, • Working to defined quality, safety and production standards, • Maintaining clean, organised and professional work areas About You • Level 2 or higher engineering qualification (NVQ, City & Guilds, apprenticeship or equivalent), • Strong mechanical engineering background, • Experience in one or more of the following sectors:, • Aerospace or aviation maintenance, • Rail or rolling stock engineering, • Defence or high-integrity manufacturing, • Heavy vehicle, diesel or plant engineering, • Marine or complex mechanical environments, • High attention to detail and pride in workmanship Direct sector experience is less important than engineering quality and systems knowledge. Apply If you are a mechanical or fit-out engineer looking to work in a quality-driven environment, apply today or contact Broadreach Recruitment for a confidential discussion

Empower Advisory UK (a part of the BMD Group based in Australia) is a project management and advisory business that makes large, complex projects simple. Our team is composed entirely of people who have made a career in delivering large, complex projects both here in UK and in Australia and who know how to make projects deliver ahead of time and budget and generate exceptional outcomes. BMD Group is Australia's leading integrated engineering, construction, and urban development business. We are dedicated to powering futures and creating legacies through a commitment to collaboration. Our team is built on the principles of collaboration and sustainability, ensuring the highest standards are met for every project and client. Job Summary and role description: This is a full-time site-based role for a Consultant Section Engineer based in Plymouth. The Consultant will manage and mentor junior engineers, and assist the Agent in managing all construction operations and technical compliance of the project in order to fulfil the assigned project safely, on time and to the required quality. Daily tasks include: · Regular communication and reporting to multiple stakeholders to ensure the seamless execution of projects, including management of subcontractors and liaising with Client representatives. · Assist with the construction strategy, including kick-off meetings, pre-commencement documentation such as Method Statements, Environmental and Quality Plans, Construction programmes, procurement, change management and design deliverable schedules. · Allocate labour, plant, materials and temporary works to carry out activities to the required standards, programme and budget. · Assist with the production of programmes, progress reports, resource and cost plans. · Identify and resolve technical problems arising from technical site issues · Conduct site evaluations, develop Health & Safety and Quality documentation, provide technical expertise, prepare reports, and ensure compliance with relevant regulations and standards. Qualifications and Experience Essential · Degree level/HNC/HND qualification in a Civil Engineering (or equivalent experience) · Proven years of construction and engineering experience, including reinforced concrete · IT skills including MS Office · Excellent Communication and Interpersonal skills · Strong Problem-Solving and Decision-Making skills · Excellent understanding of CDM regulations and site safety standards · Due to the nature of the work and location, a BPSS level of security clearance is necessary. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports can be considered for this role. Desirable · CSCS, SMSTS, TWS or TWC · BIM / Digital including Autodesk · Working knowledge of NEC contracts, commercial awareness of project delivery, planning, cost control and supply chain

Mentor and develop engineers, supporting capability growth and influencing engineering. DSEAR), and steam release, applying structured safety engineering techniques to ensure compliance and design integrity. Develop, review, and maintain safety case documentation and structured safety arguments.

Job Description Safety Engineer Certain Advantage is hiring for a Safety Engineer based in the Southwest area. The Company Were working with an engineering company specialising in solving complex engineering challenges across industriesfrom Power Generation, Rail and more.

Principal Engineer – Safety Engineering (Safety Requirements). Dreadnought Combat Systems Safety Engineering Team. Liaise with subsystem teams, suppliers, and safety engineers to ensure alignment, consistency, and effective communication of requirements.

As a Senior Road Safety Engineer, the role sits within the Road Safety team, supporting the delivery of technical excellence across a wide range of road safety activities. Are passionate about road safety and enjoy providing innovative solutions to engineering challenges. We're looking for a Senior

Understanding of Systems Engineering standards in a safety context. You will work within a Systems Engineering framework to ensure safety is embedded throughout the project lifecycle, influencing design, build, and delivery. Principal Engineer – Product Safety.

We are hiring for two Product Safety Engineers to support the safety assessment and certification of. You’ll be joining the Product Safety Team within BAE Systems’ Air business, a specialist group supporting safety and integrity across a wide range of airborne platforms and programmes. Establish

A leading engineering firm seeks a Principal Safety Engineer in Plymouth to shape safety strategies for nuclear facilities. The role involves mentoring engineers and promoting radiological safety. Candidates must have proven safety engineering experience and a relevant degree, with benefits includin

As the Senior Safety Engineer, you will be part of a hub of Safety Engineers,. Working with the engineering teams and In-Service Support teams to provide Safety & Environmental input to the effect on Safety Case Reports, Hazards and Risks associated with engineering change. Senior Safety Engineer is

A leading consulting firm in the UK is seeking a Senior/Principal Nuclear Safety Engineer to join their Nuclear Business Unit. The successful candidate will manage projects in nuclear safety and mentor junior staff.

As a Senior Product Safety Engineer you will support the Engineering Delivery. Support the development of the Project Product Safety Case, including preparation of Safety Case Reports and clear, evidence-based technical safety arguments. As a Product Safety Engineer within the team, you will help en

We are seeking an experienced Safety Case Engineer to support the development and maintenance of nuclear safety cases within a highly regulated environment. Produce key safety case deliverables including hazard assessments, fault studies, and safety justifications. Support the preparation of documen

You will work closely with a broad range of stakeholders including Site Safety Case, Human Factors, and Engineering Authority Teams. Principal Engineer –Site Asset Safety Verification. As a member of the Site Engineering Nuclear Substantiation team Your role is responsible for authoring and.

Health & Safety Team by hiring a regional Health & Safety Engineer focused on promoting a zero harm vision. The role involves conducting audits, providing guidance on safety legislation, delivering training, and supporting investigations across the South and Midlands regions. NEBOSH certification is

Lead design safety and trial safety, ensuring safety evidence is credible for readiness reviews and operations. Own the production of Hypersonica's safety procedure and embed it into how engineering and test actually run day to day. Shape and embed software safety practices appropriate to missile sy

A leading engineering consultancy in the UK seeks a Fire Engineer to manage various projects, ensuring fire safety in architectural designs. Candidates should have a relevant engineering degree and experience in fire consulting.

The role involves managing and delivering fire engineering projects, conducting inspections, and consulting on fire safety strategies. AESG, a leading consultancy firm in London, is seeking a Fire Engineer with a minimum of 4 years experience. Candidates should hold a Bachelor's Degree in Fire Engin

Join ASSYSTEM and help shape the future of nuclear engineering. ASSYSTEM is looking for a Senior Mechanical Engineer to join their team in Derby, UK. The role requires a minimum of five years of experience in the nuclear sector and understanding of mechanical design and safety requirements.

Murphy & Sons Limited is seeking a Senior Site Engineer to ensure best practices in health, safety, and environmental matters. Ideal candidates will have construction or civil engineering experience, strong knowledge of legislation, and the ability to manage safe work systems. This role offers a sig

We are looking for an Experienced Scientist, Engineer or Mathematician to join an expanding team of Safety and Reliability specialists in AFRY’s Nuclear Business Unit. Senior/Principal Nuclear Safety Engineer. The successful candidate will assist with the development and implementation of a variet

Risktec is seeking a Principal Technical Safety Engineer based in Warrington, England, with strong expertise in technical safety and software development. Candidates should have a relevant degree, at least eight years of experience in technical safety studies, and proficiency in software development

A global engineering firm in Wimborne is seeking an Electronics Engineer to assist in providing services for analogue, digital, and computer-based safety systems. Degree in Electronics Engineering or equivalent experience is required, along with skills in equipment design and strong communication ab

NUVIA is seeking a Senior Building Services Engineer in the United Kingdom to define and manage project scopes, ensuring safety, quality, and timely delivery of design documentation.

Principal Safety & Reliability Engineer page is loaded## Principal Safety & Reliability Engineerlocations: Cambridge, Cambridgeshire, England, UK: Cheltenham, Gloucestershire, England, UKtime type: Full timeposted on: Posted Todayjob requisition id: REQ-11649# **We are Ultra Precision Cont

As a key member of an exciting team leading Functional Safety activities in Product Development, this role involves working with technology subject matter experts to conduct Functional Safety analysis using efficient model-based systems engineering (MBSE / SysML) tools. Communication: Exceptional ab

We are seeking an Road Safety professional to help with our current workloads in the south and south east regions.

A leading energy authority in the UK seeks a Senior Functional Safety Engineer to oversee safety solutions for advanced mechatronic projects. The ideal candidate will have an engineering degree and proven experience in delivering high integrity systems. Responsibilities include leading safety lifecy