Trabajos technical en Cleckheaton - Page 8Crear alertas

Perform startups, maintenance, and emergency repairs on UPS, batteries, power distribution, and site monitoring equipment. UPS Service Engineer (Oil & Gas / Nuclear). Are you a UPS Service Engineer looking to join a market leading manufacturer, where you will be the go-to technical expert, with ampl

At Orange Logic, we've been solving complex content challenges for over two decades—driven by innovation, curiosity, and a passion for impact, our intelligent Digital Asset Management (DAM) system, Orange Logic Platform, empowers organizations across industries to manage, access, and leverage thei

SECURITY OFFICERST TO START IN THE NEXT WEEK AT BRADFORD AIRPORT. Enforcing Regulations: Ensuring compliance with security policies and procedures, and resolving conflicts or disturbances. Technical Proficiency: Familiarity with security equipment, surveillance systems, and basic computer applicatio

SECURITY OFFICERST TO START IN THE NEXT WEEK AT BRADFORD AIRPORT. Enforcing Regulations: Ensuring compliance with security policies and procedures, and resolving conflicts or disturbances. Technical Proficiency: Familiarity with security equipment, surveillance systems, and basic computer applicatio

We are looking for a number of full time security officers to start work in Bradford. Technical Proficiency: Familiarity with security equipment, surveillance systems, and basic computer applications. Monitoring Surveillance Systems: Observing CCTV cameras and other security systems to identify and

Are you an experienced MIG Welder looking for your next long-term opportunity? We are recruiting on behalf of a respected manufacturer based in Halifax, known for producing high-quality products for clients in the healthcare industry. This is your chance to join a busy, forward-thinking production team with excellent pay, steady hours, and a pathway to permanent employment. Key Responsibilities: Perform MIG welding on mild steel components Read and work from technical drawings and instructions Operate hand tools and equipment to assemble and weld parts Complete work using jigs and fixtures Assist with robot welding (training provided) Maintain high-quality standards on all welds Achieve daily and weekly production targets Working Hours: Rotating shift pattern(weekly) Morning Shift: Monday to Thursday - 06:00am to 2:00pm Friday - 06:00am to 1:10pm Afternoon Shift: Monday to Thursday – 2:00pm to 10:00pm Friday – 1:10pm to 8:20pm Overtime is paid after 37.5 hours per week Weekend overtime is paid at enhanced rates (excluding shift allowance) Requirements: Minimum of 1 year MIG welding experience Ability to read engineering drawings High attention to detail and commitment to quality Strong work ethic and reliability Ability to work independently and as part of a team Please note: All applicants must pass a weld test before a job offer is made. Benefits: Competative pay rate Supportive and professional working environment Long-term job security with the potential for a permanent contract Apply now by submitting your most recent CV for immediate consideration. HUDENG

Senior Drainage & Flood Risk Engineer Huddersfield, West Yorkshire | Multidisciplinary Consultancy | Full-Time | Competitive Salary + Benefits A successful and growing multidisciplinary consultancy is seeking a Senior Drainage & Flood Risk Engineer to join their established team in Huddersfield. This is an excellent opportunity for an experienced engineer to play a key role in delivering drainage and flood risk solutions across a wide range of development and infrastructure projects. Working within a collaborative, multi-discipline environment, you will contribute to the design and delivery of sustainable drainage strategies, flood risk assessments, and infrastructure solutions for residential, commercial, and mixed-use developments. The Role of Senior Drainage and Flood Risk Engineer; As a Senior Engineer, you will take responsibility for delivering high-quality drainage and flood risk projects while supporting junior engineers and working closely with other disciplines across the business. Key Responsibilities of this Drainage and Flood Risk Engineer position; • Preparation of Flood Risk Assessments (FRA) and Drainage Strategies for planning applications. * Design of sustainable drainage systems (SuDS) and surface water management solutions. * Production of detailed drainage designs for residential and commercial developments. * Liaising with local authorities, Lead Local Flood Authorities, Environment Agency, and water companies. * Supporting the delivery of projects from concept through planning and detailed design stages. * Mentoring and providing technical support to junior members of the team. * Use of industry software such as MicroDrainage, InfoDrainage, Civil 3D, or similar. About You • Degree qualified in Civil Engineering or a related discipline. * Strong experience delivering drainage design and flood risk assessments within the UK development sector. * Good understanding of SuDS principles, planning requirements, and relevant UK standards. * Experience working with stakeholders including local authorities and statutory consultees. * Working towards Chartered Engineer status (ICE or similar) is desirable. * Strong communication and organisational skills. What's on Offer for this Flood Risk and Drainage role; • Competitive salary and benefits package * Opportunity to work on diverse and high-profile development projects * Support for professional development and chartership * A collaborative and supportive multidisciplinary team environment * Clear opportunities for career progression within a growing consultancy If you are a motivated engineer looking to further your career within a respected consultancy delivering innovative drainage and flood risk solutions, we would love to hear from you.

Principal Highways & Drainage Engineer Huddersfield, West Yorkshire | Multidisciplinary Consultancy | Permanent | Competitive Salary + Benefits Are you an experienced Highways & Drainage Engineer ready to step into a senior leadership role? We are working with a large, well-established multidisciplinary consultancy seeking a Principal Highways & Drainage Engineer to join their growing Huddersfield office. This is an exciting opportunity to take a leading role in delivering high-quality infrastructure design across a diverse portfolio of development and infrastructure projects, while mentoring engineers and shaping project delivery. The Role of Principal Highways and Drainage Engineer; As a Principal Engineer, you will lead the design and delivery of highways and drainage schemes for residential, commercial, and mixed-use developments. You'll collaborate with internal disciplines and external stakeholders to ensure projects are delivered efficiently and to the highest technical standards. Key Responsibilities of this Principal Highways and Drainage Engineer role; • Lead the design and delivery of highways and drainage infrastructure projects from concept through to construction. * Oversee the preparation of highways designs (S38 / S278) and drainage strategies (SuDS, S104). * Manage project teams, providing technical guidance and mentoring to junior engineers. * Liaise with local authorities, clients, and other stakeholders to secure approvals and deliver successful outcomes. * Review and approve technical designs, reports, and drawings. * Support project management activities including programme, budget, and resource planning. * Contribute to business development, client relationships, and project bids. About You • Degree qualified in Civil Engineering or a related discipline. * Chartered or working towards chartership (ICE or similar). * Significant experience in highways and drainage design for development infrastructure. * Strong knowledge of UK design standards, S38, S278, S104, and SuDS. * Experience using industry software such as Civil 3D, MicroDrainage, InfoDrainage, or similar. * Excellent communication and leadership skills. What's on Offer Competitive salary and comprehensive benefits package * Clear career progression into senior leadership roles * Opportunity to work on high-profile multidisciplinary projects * Support for professional development and chartership * Flexible and collaborative working environment If you're looking for the next step in your career with a consultancy that values technical excellence, innovation, and career development, we'd love to hear from you.

Headley have a live vacancy with a bespoke manufacturer offering an interesting, rewarding and progressive career opportunity. The company itself is a bespoke manufacturer of a wide range of end projects. We are seeking an experienced CNC machinist, wood machinist – programmer, who has the willingness, ability and ambition to develop skills in CAD design, producing working drawings for the shop floor. Any working exposure to CAD software packages such as Solidworks, Autodesk Inventor, Autocad or other is helpful, but training and development will be offered. This is a rare opportunity to gain technical skills and experience to further your future career. Essential is confident knowledge of using Alphacam software to programme the CNC router (Morbidelli), being comfortable with technical drawings and the ambition to progress your career. Key duties to include: • Using Alphacam, programme CNC router in manufacture of joinery items for bespoke displays., • Working in close conjunction with teams in Design and Manufacturing to understand and promote best practice., • Maintenance of cutting lists, programmes and technical documentation, • Selecting tooling, • Best use of materials This will comprise perhaps 75% of the working week. The rest of time: • Using CAD software, produce working technical drawings for the shop floor., • Working with other Design Department members to better learn and understand CAD software and its use, • Training and support offered as you learn the CAD element of the job. Experience required: • Alphacam knowledge programming CNC routers is essential, • Experience working in a joinery orientated workshop, • Able to read and understand technical data, • Ability to learn new skills and an ambition to learn and develop knowledge in using CAD software, • Any exposure to CAD software is particularly helpful, but not essential, • Good attitude to work; ambitious, enthusiastic, reliable and a commitment to improving. Full info on application

This is a rare opportunity to join a high-quality consultancy at a genuinely formative point in your career. The business operates at the intersection of architecture, development and strategic advisory and they're now looking for an Associate who wants more than just a title change. This role is about building a long-term career, with a clear and realistic pathway through to Director level. The Role You'll work closely with senior leadership across a range of advisory and delivery-focused projects, supporting clients from early feasibility through to delivery strategy. This is not a back-office Associate position - you'll be exposed to clients early, trusted with responsibility, and encouraged to shape both projects and the wider business. Key responsibilities include: Leading and supporting workstreams on mixed-use, residential and commercial projects Contributing to development appraisals, feasibility studies and strategic advice Preparing high-quality reports and client presentations Attending and increasingly leading client meetings Playing an active role in mentoring junior staff as the team grows Supporting fee proposals, bid submissions and client pitches Work Winning & Business Development An important part of this role is helping to grow the business. You won't be expected to arrive with a black book, but you will be encouraged to develop one. You will be involved in: Assisting with bids, proposals and presentations Building relationships with existing and new clients Identifying opportunities within live projects and networks Supporting Partners in developing new service lines and markets You'll be expected to take ownership of client relationships and contribute meaningfully to revenue generation, a key part of the journey to Director. The Opportunity This is where this role really stands out. You'll be offered: A defined progression route from Associate to Director Direct access to Partners and senior decision-makers Support with technical, commercial and business development skills Opportunities to shape the growth of the business, not just service itAbout You Background in development, architecture, surveying or real estate advisory Commercially aware, with a strong interest in project viability and strategy Confident with clients and comfortable in a consultative role Interested in business development and work winning, not just delivery Looking for a long-term role with influence and progressionCalibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business

Stairlift Engineer Stairlift repair, Stairlift installation Stairlift Industry Huddersfield, West Yorkshire Salary & Earnings: Basic salary: £30,000 - £35,000 p.a. Additional earnings: overtime, travel time, and commission c. £30,000 p.a. OTE: c. £60,000 p.a. Benefits: Private healthcare Pension plan 33 days' holiday (including bank holidays) Flexible working hours Full training and development provided Clear career progression with evidence of internal promotion Marmon Lift Recruitment is recruiting for one of the UK’s fastest-growing independent stairlift companies. With a rapidly expanding workforce and growing infrastructure, the company provides a stable environment and a continuous flow of work for engineers. If you’re prepared to work hard, you’ll earn significant money and have excellent career opportunities. Commutable from: Huddersfield, Halifax, Dewsbury, Leeds, Barnsley, Bradford, Wakefield, Batley, Bingley, Keighley, Burnley Responsibilities of a Stairlift Engineer: Install straight and curved stairlifts in customer homes Service and maintain stairlifts to manufacturer standards Provide exceptional customer service and technical support Maintain accurate service records and ensure compliance with safety procedures Assist with scheduling, travel, and preparation of parts and equipment The Ideal Stairlift Engineer Candidate: Minimum 2 years’ experience working with stairlifts (essential) Strong mechanical and electrical skills (essential) Relevant electrical qualifications (essential) CSCS and/or SSSTS certification (desirable) Knowledge of major stairlift manufacturers (desirable) Why Apply? Competitive basic salary with regular overtime Potential earnings of c. £60,000 p.a. if you work hard Private healthcare and pension 33 days’ holiday, including bank holidays Flexible working hours and a supportive team environment Career development opportunities in a rapidly growing company Apply to this Stairlift Engineer position: For a confidential conversation, call (phone number removed) (Monday - Friday) Ping us your CV by email Marmon Lift Recruitment is passionate about understanding what is truly important in your next move before you enter the application or interview process. This commitment to you will ensure we represent your best interests at all times, and together we can secure your next move in the stairlift industry

Benefits Competitive salary 25 days' annual leave plus Bank Holidays Company vehicle with fuel card Mobile phone and laptop Hotel card for overnight stays Company pension scheme Health and Wellbeing Programme Salary sacrifice electric vehicle About the Company Our client is a well-established and highly respected supplier of machine tools to the UK manufacturing sector, with many years of industry experience and a strong nationwide customer base. Due to continued growth, they are seeking a Training & Applications Engineer to join their field-based applications team. This role would suit an apprentice-trained CNC professional who enjoys working directly with customers, delivering training, and providing hands-on technical support across a range of machine tools. The Role The successful candidate will support customers across the UK, delivering machine training, demonstrations, and technical assistance both pre- and post-sale. The role is field-based and will involve regular travel, including some overnight stays and visits to customer sites and regional showrooms. Key Responsibilities Deliver training to customers on a wide range of CNC machine tools Support customers in meeting production and operational requirements Demonstrate machines pre- and post-sale Troubleshoot and resolve technical issues at customer sites Provide technical support as required Capture customer feedback and report recurring issues to support continuous improvement Recommend process improvements to improve efficiency and reduce costs Full training is provided, including an initial training programme at the company's UK headquarters, followed by on-the-job mentoring with senior engineers and ongoing professional development. About You Apprentice trained with a minimum 4-year engineering apprenticeship Background in CNC programming, machining, or applications engineering Comfortable working hands-on with machine tools Turning and milling experience is highly advantageous Strong communication and customer-facing skills Experience with CNC controls such as ProtoTRAK or Siemens is beneficial but not essential Willing to travel nationwide and stay overnight when required Precision People is a leading recruitment agency that specialises in sourcing top talent for Engineering, Technical, Sales and Senior Management roles across a wide range of industries. With a focus on precision and quality, their team of expert recruiters works tirelessly to match the best candidates with the right employers, ensuring that both parties benefit from a successful partnership. Precision People has the expertise and resources to help you find the perfect role. With a deep understanding of the industry and a commitment to excellence, they have built a reputation for delivering exceptional results and exceeding their candidates' expectations. TPBN1_UKTJ

Job Description Analytical Development Scientist Location: Huddersfield Rate: £18.91 per hour Contract Length: 6 Months Role Purpose Provide measurement science to generate and improve manufacturing processes for new and existing products through improved understanding. Support manufacturing processes and projects to meet business targets. Utilise laboratory and plant information efficiently to identify improvements and implement change in line with good change‑management principles and procedures. Accountabilities Collaborate with internal and external partners to deliver analytical aspects of process development and manufacturing support. Remain up to date with scientific developments and proactively identify opportunities to apply them to project work. Plan, manage and conduct non‑routine chemical and physical analysis, analytical development, and process analytical technology projects to support new and existing manufacturing processes. Provide expertise and advice in Analytical Chemistry to both local and global teams under guidance of the Specialist Team Leader. Support development of other scientists in analytical techniques and best practices. Use knowledge and experience to improve safe ways of working in partnership with Departmental Safety Leadership teams. Manage, record and communicate activities in compliance with site, company, and regulatory requirements. Knowledge, Experience & Capabilities Critical Knowledge Degree (BSc, MSc, or equivalent) in Chemistry or Analytical Chemistry with a proven track record in analytical method development. Knowledge of HSE systems, QA procedures, and compliance responsibilities. Critical Experience Comprehensive experience with chemical and physical analytical techniques such as LC, GC, MS, NMR, FTIR, SEM, EDS, and PSD. Strong background in analytical chemistry, critical data analysis (statistics/DoE), method development, calibration, modelling, validation, and technical transfer. Significant experience supporting manufacturing operations including process monitoring, data analysis, troubleshooting, and implementing process improvements.Critical Technical, Professional & Personal Capabilities Problem Solving: Ability to analyse complex problems and generate creative, original solutions. Management: Strong time management, work planning (>4 weeks), team coordination, and meeting management skills. Laboratory/Analytical: Comprehensive practical and theoretical knowledge. Research Skills: Literature/database searching, and ability to interpret complex information. Communication: Clear verbal, written, and presentation skills; ability to adjust detail based on audience. Networking: Ability to maintain and extend internal/global networks and contribute constructively to teams. Physico‑Chemical Awareness: Strong application of physico‑chemical principles to method development, including use of specialised data‑analysis tools. Management of Change: Detailed knowledge of site MoC procedures and awareness of impacts to product quality, compliance, formulation and regulatory requirements. Technical Competencies Technical CompetencyLevel Process Technology for Life Cycle ManagementBasic Process DevelopmentBasic Data Science for PractitionersBasic PTAI Separation Science TechniquesProficient Laboratory SkillsProficient PTAI Spectroscopic TechniquesProficient Product KnowledgeProficient Phys‑Chem Properties TechniquesProficient PTAI Sample Preparation TechniquesProficient Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy

Assembly Technician (multiple needed over the next 6 months phasing) Daily duties as Assembly Technician: * Practical experience with tools, machinery or similar assembly tasks * Ability to read technical drawings or willingness to learn * Familiarity with power tools, screwing machines (and crane/FLT operation is a bonus) * A detail-oriented, safety-conscious and team-focused attitude Pay Rate: £13.46 per hour, rising to £14.45 when fully trained Hours: Mon-Wed: 07:00-17:00, Thus: 07:00-16:30, Optional overtime on Fridays maybe available (Time + ½) Location: Dewsbury, commutable from Wakefield, Horbury, Brighouse, Morley, Cleckheaton, Tingley, North Huddersfield, Barnsley, Rotherham, Sheffield. Status: 18 week Temp to Perm Are you ready to join one of the UK's leading independent engineering and services companies. This new site is ready to launch in the next few weeks! Assembly Technician is a hands-on role offering long-term stability, skill development and clear progression opportunities Excellent benefits and holiday package available when you transfer permanent. Key Responsibilities as Assembly Technician: You'll be involved in a wide range of practical tasks including: o Assembling components using hand tools, power tools and screwing machines o Building and stacking parts to specification o Screwing and wrapping (including boat wrapping) o Preparing welds and working with pipe ancillaries o Kitting, cutting (pipe, basket, tray, trunking) and measuring materials o Working with steel, copper, plastic pipework - conduits, ducting and pipe spooling Technical Work as Assembly Technician: o Reading and interpreting engineering drawings o Installing and testing distribution boards o Performing quality inspections and basic preventative maintenance o Lagging and troubleshooting assembly issues o Attention to detail and dexterity - copper pipe is soft and expensive Safety & Standards expected as Assembly Technician: o Adhering to strict Health & Safety protocols o Keeping workspaces clean, tidy and organised each shift o Ensuring accurate and high-quality assembly throughout If you're a mechanically or electrically minded Assembly Technician with a thirst to learn and move around in your day to day work, this could be the role for you. Any previous people who have worked with power tools in a fast paced engineering, manufacturing or one of the following previous roles, Manufacturing Operative, Engineering Labourer, Semi Skilled Worker, Production Operative (engineering), Workshop Operative, Mechanical Assembly Operative, Electrical Assembly Operative, Semi-Skilled Fabricator, Modular Build Operative, Installation Technician, Assembly & Build Technician, Tooling Operative, Crimping & Cutting Operative, Pipework Assembly Operative, Site Build Operative, please click apply NOW! Kinetic plc is a Recruitment Consultancy with over 40 years of experience of delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications with a high degree of care, we review all submissions and will attempt to contact applicants who match the job profile. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities

An exciting new Class 1 - Driver opportunity at DX! * This is a Dayshift vacancy* All about you You will be friendly, hard-working and love the buzz of getting things done. We value team players and here at DX we are committed to providing our people with the technical and personal skills to progress their careers. About us We are a leading independent parcel, mail and logistics services company operating throughout the UK and Ireland delivering the important things in life. DX Freight provides next-day or scheduled delivery services for parcels and freight, as well as comprehensive logistics solutions, including warehouse management and the operation of customer-liveried vehicles. Our brand is what we do every day and our values set the tone for how we want our colleagues to go about their business of delivering the Delivered Exactly promise. What will it feel like to be part of our team? At DX, we know our people are our foundation of success. We are passionate about your career progression with us. We strive to develop and promote from within whenever we can, so if you want to develop your career DX will provide the training and the opportunities! Role summary: To transport goods to and from customers' premises, and our central hubs, into the DX delivery network. This role requires the ability to work to deadlines and to manage on-road routes in order to achieve time-sensitive deliveries. Key responsibilities Proven track record of driving vehicles in a safe and legal manner ensuring compliance with all legal requirements Understand and be able to comply with driver's hours and WTD legislation Understand and be able to carry out necessary vehicle checks to ensure vehicle safety and to be able to report defects correctly Must comply with on-site health and safety requirements Have the experience and knowledge to be able to divert cross country to and from the hub as and when signs, traffic or other conditions dictate Essential Criteria You must hold an HGV 1/C+E Licence No more than 6 points on your licence and no DD/DR Code convictions Hold a current valid DCPC Card Benefits: Competitive Rates of Pay Holidays: 20 days increasing with length of service + bank holidays Long Service Recognition scheme Enhanced Maternity & Paternity Company Pension Scheme Life Assurance Employee Assistance programme including 24/7 Virtual GP DX Discounts Portal Excellent opportunities for career progression and more!! We look forward to hearing from you! TPBN1_UKTJ

Role: Operations Manager Location: Halifax Working Hours: 08.30 – 17.00 Mon-Thursday & 08.30 – 14.30 Friday GPS Recruitment have an exciting opportunity for an experienced Operations Manager to take responsibility for leading and optimising all manufacturing operations to ensure safe, efficient, and cost effective production. This role oversees daily factory activities, production planning, quality, maintenance, and continuous improvement initiatives to support business objectives and customer satisfaction. Key Responsibilities • Production & Operational Management, • People Leadership, • Health, Safety & Compliance, • Quality & Continuous Improvement, • Supply Chain & Inventory Coordination, • Budgeting & Reporting Skills & Experience Required • Proven experience in manufacturing operations management or a similar leadership role., • Strong understanding of production processes, Lean manufacturing, and continuous improvement., • Experience managing teams in a fast‑paced industrial environment., • Excellent problem‑solving, decision‑making, and organisational skills., • Strong technical acumen and familiarity with manufacturing systems (ERP/MRP)., • Ability to influence, communicate, and build relationships across all levels. Qualifications • Degree in Engineering, Manufacturing, Operations Management, or related field (preferred)., • Lean/Six Sigma certification desirable., • IOSH/NEBOSH certification beneficial. Salary is Neg on experience (Very competitive)

Trade Counter Sales Specialist (UPVC / Window & Door Parts) £27,000 - £30,000 DOE + Product Training + Bonus + Early Friday Finish + Company Benefits Birstall Are you a builder's merchant or customer service professional with knowledge of UPVC, windows, or door hardware, looking to join a well-established family business? Established over 30 years ago, this family-run business supplies high-quality UPVC, window, and door hardware to tradespeople, locksmiths, and DIY customers across the UK. Known for its technical expertise and exceptional service, the company has built a strong reputation as a trusted partner in the industry. In this role, you will assist customers at the trade counter and over the phone, identify and supply the correct parts, manage stock, and provide technical advice. You'll support both trade professionals and DIY customers, helping to ensure smooth day-to-day operations and excellent service. This role would suit a customer-focused sales or service professional with knowledge of UPVC, windows, or door hardware, who enjoys working in a hands-on, supportive, family-run environment. The Role: Assist customers at the trade counter, over the phone, and via email Identify and supply the correct UPVC, window, and door parts Provide technical advice and guidance to customers Manage stock levels and help with stock replenishment Promote products and support upselling opportunitiesThe Person: Strong customer service or sales skills, with a friendly and professional approach Technical knowledge or interest in UPVC, windows, and door hardwareIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Keywords: UPVC, Window Parts, Door Hardware, Trade Counter, Sales Advisor, Customer Service, Technical Sales, Product Knowledge, DIY, Inbound Sales, Leeds, West Yorkshire Reference Number: BBBH24098A We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skillset. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website

Mill/Turn Programmer/Setter/Operator Location: Halifax, West Yorkshire Salary: £18 - £19 per hour Benefits: • Competitive salary with overtime available, • Permanent day shift with early Friday finish, • Modern CNC machining facility, • Stable, long-established engineering business, • Opportunity for long-term progression, • Supportive and professional working environment The Company: This is an excellent opportunity for a Mill/Turn Programmer/Setter/Operator to join a well-established precision engineering company with decades of experience in high-precision machining. The company specialises in producing complex components for demanding industries and has built a strong reputation for quality, reliability, and technical excellence. With continued investment in advanced CNC machinery and a secure order book, the company offers long-term stability and a professional, team-focused environment. This Mill/Turn Programmer/Setter/Operator position offers the chance to work on varied and technically challenging components within a clean and modern workshop. Working Hours: 8:00am – 4:50pm Monday – Thursday 8:00am – 12:15pm Friday- (36.75 hours per week) Job Description: The Mill/Turn Programmer/Setter/Operator will be responsible for programming, setting, and operating CNC mill/turn machines to produce precision components to engineering drawings and quality standards. Key responsibilities include: • Programming, setting, and operating CNC mill/turn machines, • Producing components to tight tolerances and quality requirements, • Working from detailed engineering drawings, • Machining small batch and one-off precision components This Mill/Turn Programmer/Setter/Operator role offers varied work and the opportunity to support high-precision manufacturing within a professional engineering environment. Skills & Experience: To be successful in this Mill/Turn Programmer/Setter/Operator role, you should have: • Experience programming, setting, and operating CNC mill/turn machines, • Strong CNC turning experience with live tooling, • Experience with either Fanuc, Mazak, or Siemens controls, • Ability to read and work from engineering drawings independently, • Experience working in a high-precision machining environment, • Ability to work to tight tolerances, • Apprentice trained machinist (advantageous) Why Should You Apply? This Mill/Turn Programmer/Setter/Operator role offers an excellent opportunity to join a secure and growing precision engineering business with a strong reputation and modern facilities. You will benefit from excellent working hours, varied technical work, and long-term career stability. This is an ideal opportunity for an experienced Mill/Turn Programmer/Setter/Operator looking to join a professional engineering company that values skill, quality, and long-term employee development

Job Title: MIG Welder Location: Dewsbury Pay Rate: £14.50 per hour Job Type: Temp to Perm (12 weeks) Hours: 6:00am - 2:30pm Job Overview We are currently recruiting for an experienced MIG Welderto join a busy and growing company based in Dewsbury. This is a temp-to-perm opportunity, offering a permanent contract after 12 successful weeks. Working Hours & Pay • Monday to Friday * 6:00am - 2:30pm * 30-minute paid break * 30-minute unpaid break * 40 hours paid per week * £14.50 per hour Key Responsibilities • MIG welding on a variety of metal components * Reading and working from technical drawings * Ensuring all welds meet quality standards * Maintaining a clean and safe working environment * Supporting the wider production team as required Requirements What We Offer • Immediate start available * Weekly pay * Ongoing work * Permanent contract after 12 weeks If you are an experienced MIG Welder looking for a stable, long-term opportunity in Dewsbury, we would love to hear from you. Apply today with your CV. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age

Software Engineering Team Lead / Software Engineering Manager Location: Bradford (Hybrid - 2 days onsite per week) Salary / Package: £80,000 + excellent benefits Exalto Consulting is supporting a leading UK retail organisation as they recruit an Engineering Team Lead / Software Engineering Manager. This is an opportunity to guide and strengthen an engineering function that underpins a major online retail platform. About the Role As the Engineering Team Lead, you will support and develop a motivated software engineering team responsible for delivering, maintaining and improving a large‑scale e‑commerce platform used by millions of customers. This role blends people leadership with technical oversight. You will help create an environment where engineers feel trusted, supported and empowered to do their best work. You will also lead the delivery of roadmap initiatives that contribute directly to commercial and customer outcomes. What You'll Be Doing * Leading, developing and supporting a high‑performing e‑commerce engineering team. * Building a culture rooted in trust, accountability and continuous improvement. * Holding regular one‑to‑ones, providing coaching and guiding professional development. * Acting as an escalation point while enabling the team to resolve most issues independently. * Overseeing the technical execution of roadmap features, improvements and fixes. * Ensuring good engineering practices are followed and that quality is owned collectively. * Collaborating closely with digital, UX, architecture, QA and wider business teams. * Supporting planning, prioritisation and delivery cycles and driving iterative improvements. * Leading post‑incident and post‑release reviews with a focus on learning. * Ensuring compliance with UK‑GDPR, PCI‑DSS and other relevant UK regulations. * Keeping customer outcomes at the centre of decision‑making. Essential * At least three years' experience leading an engineering team. * Strong problem‑solving skills and sound technical judgement. * Clear, confident communication and effective leadership skills. * Ability to work under pressure while maintaining high standards of accuracy. * Pragmatic, adaptable and focused on delivering measurable value. * Comfortable working with autonomy. Desirable * Knowledge in areas such as digital marketing, digital merchandising, search and navigation, taxonomy, content management or digital analytics. * Experience delivering or supporting E‑commerce systems in a UK online retail environment. * Experience working with offshore delivery partners. * Ability to manage conflict and build trust across teams. * Confidence to challenge established practices constructively. * A degree in Computer Science, Software Engineering or a related field. This is a hybrid role based in Bradford. Periods of flexibility may be required at key stages of delivery. The organisation values openness, fairness and collaboration, and this role provides the opportunity to shape both engineering practices and the wider digital experience

Warehouse Operative Lift Engineering Warehouse Stairlift Industry Bradford, West Yorkshire Basic Salary: £25,000 – £30,000 p.a Benefits: Paid Overtime, Flexible Start & Finish Time, 28 Days Holiday (inc. Bank Holidays), Company Pension Marmon Lift Recruitment is seeking a hands-on, technically minded Warehouse Operative to join an established stairlift warehousing team in Bradford. This is not a typical picker/packer role within a commercial distribution centre — it’s ideally suited to an ex-Stairlift Engineer or someone from an electrical, mechanical or construction-based warehouse background who understands engineering components and technical parts rather than parcel distribution. Commutable from: Bradford, Leeds, Morley, Huddersfield, Wakefield, Castleford, Keighley, Halifax, Brighouse, Shipley, Bingley The Warehouse Operative Role You’ll be joining a specialist lift engineering warehouse Manage engineering stock, parts & logistics Operate the existing stock management software (SBO) Strip down stairlifts for reusable components Assist in building reconditioned stairlifts Organise the workshop floor The Ideal Warehouse Operative Candidate This is a practical, hands-on role: ideal for someone who understands tools, components and mechanical assemblies. Ex-Stairlift Engineer - desirable Experience working in an electrical/mechanical/construction/building merchant warehouse - essential Confident working with engineering parts and assemblies - desirable Organised, proactive and able to take ownership - essential Comfortable with problem-solving and improving processes - essential Apply to this Warehouse Operative position: For a confidential conversation, call (phone number removed) (Monday - Friday) Ping us your CV by email Marmon Lift Recruitment is passionate about understanding what is truly important about your next move before entering an application or interview process. This commitment to you will ensure we represent your best interests at all times

Start Your Career as a Trainee Field Service Engineer with Hotpoint Are you ready to launch a hands-on career with one of the UK's most trusted appliance brands? Hotpoint is offering an exciting opportunity to train and qualify as a Trainee Field Service Engineer. No experience? No problem - we'll give you all the training you need to succeed! If you enjoy fixing things, love working with your hands, and want a job where every day is different, this could be the perfect fit for you. About the Role As a Trainee Field Service Engineer, you'll be out on the road, visiting customers' homes to diagnose and repair household appliances. You'll be the friendly face of Hotpoint, helping people get their appliances back up and running. What you'll be doing: Driving your own Hotpoint van to customer appointments Diagnosing and repairing appliances like tumble dryers, electrical cookers, washing machines Providing top-notch customer service Managing your tools and spare parts stock Promoting our trusted Hotpoint products Your Training Journey We'll fully support you from day one with a blend of classroom learning, hands-on experience, and on-the-job training: Welcome Induction (2 days) - Meet your team, collect your equipment, and learn key safety info Shadowing - Join an experienced engineer on the road to see the job in action Phase 1 Training (2 weeks) - Technical training at our specialist centre in Peterborough On-the-Job Learning (6 - 9 months) - Build your skills with real customers Phase 2 Training (1 week) - Level up your knowledge learning another appliance What You'll Need We're looking for people who are: Passionate about customer service Interested in electrics, mechanics, or hands-on problem-solving Hold a full UK manual driving licence Physically fit - able to move and lift appliances Eligible to work in the UK No previous field engineering experience is required - just a great attitude and a willingness to learn! What's In It for You? Pay: £27,377 per year increasing to £28,352 after 6 months (daily rate equivalent via umbrella company) Bonuses: Commission + overtime opportunities Vehicle: Fully equipped company van + fuel card Time Off: 20 days holiday + bank holidays increasing to 25 days once permanent Benefits: Access to Perkbox (discounts, perks & treats) Progression: The chance to move into a permanent role within 12 months with even more rewards Why Choose Hotpoint? Learn from the best with industry-leading training Join a globally respected brand trusted by millions Enjoy a secure career path with opportunities to grow Be part of a team that values skill, effort, and dedication Ready to Apply? This is more than just a job - it's the start of a long-term career where you'll learn new skills, meet great people, and be proud of what you do. Hit Apply and take the first step to becoming a fully qualified Field Service Engineer with Hotpoint. For further information please contact Sheona

CNC Programmer (Progression to Applications Engineer) £40,000 - £42,000 + Full Training + Mon-Fri + Progression + Company Vehicle + Benefits Huddersfield (Nationwide Travel) Are you a CNC Programmer or Machinist or similar looking for an off-the-tools Applications position for a leading company in the Machine Tools industry who give you full training and development, a company vehicle and fully expensed travel and the opportunity to pass your knowledge down to the next generation of CNC Machinists? On offer is the chance to join a market leading OEM (Original Equipment Manufacturer) representing a brand synonymous with quality. You will be working directly for the manufacturer, so you will get all the tools, parts and equipment you need as well as specialist training to expand your knowledge base and provide industry leading training to a range of customers. In this varied role, you will be based out of the Yorkshire showroom and travelling to customer sites across the UK. You will be responsible for performing program demonstrations and machine training on a range of the companies products, provide technical support and resolve issues. This role will require you to stay overnight twice a week on average and all travel is expensed with a company vehicle provided for both work and personal use. This opportunity would suit a CNC Programmer or Machinist with a background in Siemens or Prototrak programs looking for an off-the-tools training role with a company who will give you extensive training, routes to progress and a range of lucrative benefits. The Role: Product Demonstration's and Training Session's Showroom and site-based locations Troubleshooting and Technical Support assistance Monday to Friday - expensed overnight stays Company vehicle provided including personal use Full training - workshop, shadowing and practical The Person: CNC Programmer, Machinist or similar Any programming background - including Siemens, Prototrak, Mazak or Fanuc Full UK Driving License, happy to travel and stay overnight Commutable to Huddersfield Reference: BBBH24320A Keywords: Training, CNC Programmer, Programming, CNC Machinist, Milling, Turning, Machine Tools, Tooling, Field-Based, Huddersfield, Leeds, Yorkshire, Sheffield, Fanuc, Mazak, Siemens, Prototrak If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Job Title: Architectural Technologist Salary: £30,000 - £35,000 Location: Huddersfield (Hybrid working included) We're working with an established and successful multidisciplinary consultancy, providing services across a range of disciplines for clients in the residential sector. Having been established over 30 years ago, they have over three decades of experience developing a strong reputation across the UK. You will require: Knowledge and experience in AutoCAD (Revit experience preferable but not essential). Proven experience in a design office. Construction technical knowledge Experience in Building and Planning regulations / Procedures Good interpersonal, communication and written articulation skillsPerks On top of a competitive salary, the successful candidate can expect to receive up to 30 days annual leave plus bank holidays. In addition, all professional subscription fees will be paid for, and an excellent fully funded training programme with regular in house CPD events will be provided. The company is renowned for being a relaxed, family friendly company who value their staff highly, fostering an environment which will support your progression and development in the long run. To apply now, please use the link provided. For more information you can contact our Architecture consultant Tom Brown on (phone number removed) or Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business

TIG Pipewelder required for specialist pipework and fabrications firm looking to increase head count due to expansion. Working only Monday to Thursday, enjoy a long weekend off, breaks are paid, Free parking, Permanent contract available after successful completion of 26weeks temp' (like a probationary) period. Pay: OTE £54,440.10 (£46,191.60 basic salary £21.15ph PAYE for standard 42hours + x1.5 Overtime Fridays average 5hours) Once permanent excellent employee benefits including a birthday day off and option of buying 4 extra holiday days! As TIG Pipewelder your day to day duties will cover (but not be limited to): * Welding to X ray standard on both stainless and carbon steel (mild) materials * Ability to read drawings; cut and fab' pipe spools, unsupervised! * Majority of the welding is Tig & Mag welding • Weld test will take place at interview stage and will consist of the following: TIG stainless steel 54-89mm diameter wall thickness 2mm-5.49mm and a MAG Carbon steel 114mm diameter wall thickness 4.54mm, • You must be able to weld at position PA/PB * May be required to work onsite on occasions so strong mechanical assembly & fitting skills required! * Fabricating pipes, flanges, plant rooms, skids to a very high specification onto pipe spools * All other general fab shop duties expected of you across the shift As TIG Pipewelder you will be expected to work and adhere to strict Health and Safety standards set by the company To be successful in your application as TIG Pipewelder you MUST be: * Skilled and have a proven work experience in fabrication and pipe welding with stainless steel and mild steels for more than 2 years or * Have necessary qualifications/ be time served and experienced in MIG TIG welding within a similar engineering environment. * Driving License ideal due to location of site outside Leeds and potential wagon driving adhoc on the job. Status: Permanent after successful completion of 26week temporary (like probationary) period Location: Morley, Leeds, Beeston commutable from Shipley, Otley, Bradford, Wakefield, Dewsbury, Huddersfield, Halifax and local train stations. To apply for this TIG Pipewelder role, if you are previously a Coded Welder, Plater Welder with experience doing MIG and TIG welding to an Xray standard, you could be considered and be shortlisted asap, please click apply now and or call Kinetic Yorkshire team asap Pay: OTE £54,440.10 (£46,191.60 basic salary £21.15ph PAYE for standard 42hours + x1.5 Overtime Fridays average 5hours) Application: To apply for this TIG Pipewelder role, please click "Apply Now" or call the Kinetic Yorkshire team as soon as possible. Kinetic plc is a Recruitment Consultancy with over 43 years of experience of delivering staffing solutions to the engineering, manufacturing, and technical industries. Kinetic plc treats all applications with a high degree of care, we review all submissions and will attempt to contact applicants who match the job profile. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities. S&T1

Pipewelder (x3 DIRECT PERMANENT WITH COMPANY DAY1) required for specialist pipework and fabrications firm looking to increase head count due to expansion & new facility workshop in Morley! Working only Monday to Thursday, enjoy a long weekend off, breaks are paid, Free parking, Permanent contract day1 with the company Pay: OTE £54,440 (£46.2k basic salary £21.15ph PAYE for standard 42hours + x1.5 Overtime Fridays average 5hours) As Pipewelder your day to day duties will cover (but not be limited to): *Welding to X ray standard on both stainless and carbon steel (mild) materials *Ability to read drawings and cut pipe spools unsupervised *Majority of the welding is Tig & Mag welding *You must be able to weld at position PA/PB Weld test will take place at interview stage and will consist of the following: *TIG stainless steel 54-89mm diameter wall thickness 2mm-5.49mm *and a MAG Carbon steel 114mm diameter wall thickness 4.54mm May be required to work onsite on occasions so strong mechanical assembly & fitting skills required! Fabricating pipes, flanges, plant rooms, skids to a very high specification onto pipe spools All other general fab shop duties expected of you across the shift As Pipewelder you will be expected to work and adhere to strict Health and Safety standards set by the company! To be successful in your application as Pipewelder you MUST be: *Skilled and have a proven work experience in fabrication and pipe welding with stainless steel and mild steels for more than 2 years or more *Have necessary qualifications/ be time served and experienced in MIG TIG welding within a similar engineering environment *Driving License is essential due to location of site outside Leeds and potential wagon driving adhoc on the job. Status: Permanent Location: Morley commutable from Shipley, Otley, Bradford, Wakefield, Dewsbury, Leeds, Huddersfield, Halifax and local train stations. To apply for 1of these 3x PERMANENT Pipewelder roles, if you are previously a Coded Welder, Plater Welder with experience doing MIG and TIG welding to an xray standard, you could be considered and be shortlisted asap, please click apply now and or call Kinetic Yorkshire team asap Kinetic plc is a Recruitment Consultancy with over 43 years of experience of delivering staffing solutions to the engineering, manufacturing, and technical industries. Kinetic plc treats all applications with a high degree of care, we review all submissions and will attempt to contact applicants who match the job profile. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities. S&T1

My client on the Cleckheaton area require an experienced x 2 Welder / Fabricators. Overview The successful candidate will be responsible for fabricating, welding, and fitting metal components with precision and efficiency. This role offers an excellent opportunity for individuals with a strong mechanical background and experience in various welding techniques to contribute to high-quality projects within a dynamic environment. Applicants must be detail-oriented, safety-conscious, and capable of working both independently and as part of a team. Duties Fabricate metal parts according to technical drawings and specifications Use hand tools, power tools, and fabrication equipment to cut, shape, and assemble components Fit welded parts accurately, ensuring proper alignment and fitment Assist in the assembly of fabricated structures or machinery as required Conduct quality checks on completed work to ensure compliance with standards Maintain a clean and safe work environment by adhering to health and safety protocols Skills Good knowledge of workshop machinery, lathes, saws, folders Strong knowledge of fabrication processes involving sheet metal and structural steel Experience using hand tools, power tools, and specialised welding equipment Mechanical knowledge with the ability to interpret technical drawings and schematics Basic mathematical skills for measurements, calculations, and adjustments during fabrication Ability to work accurately with attention to detail in a fast-paced environment Competence in assembly tasks related to welded components Good understanding of health and safety regulations relevant to welding and fabrication work Working Days IND123

Business Operations Analyst Location: Huddersfield, West Yorkshire Salary: Up to £35,000 per annum, dependent on experience Job Type: Full-Time / Permanent About Us Buy It Direct is one of the UK's fastest-growing online retailers, operating award-winning brands like Laptops Direct, Appliances Direct, and Furniture123. We keep all our stock in vast distribution centres before shipping, meaning our operations need to be sharp, scalable, and relentlessly efficient. Here at Buy It Direct, we don't follow the normal ways of working. We think unconventionally. We are looking for ingenuity, tenacity, and people who want to get stuck into the real work from day one. About the Role Are you a naturally curious problem-solver looking to build a long-term career in Business Analysis or Enterprise Architecture? We have a fantastic opportunity for an ambitious Business Operations Analyst to join our team. This role serves as the crucial bridge between our raw operational data and the tactical, day-to-day running of the business. You will dive into our metrics, map out how our departments currently function, and help design the future of how we work. It is the perfect launchpad for someone looking to grow into a fully-fledged Business Analyst, Systems Analyst, or Solutions Architect. What you’ll be doing: Analysing operational data across logistics, commercial, and customer service teams to identify trends, bottlenecks, and opportunities for efficiency. Mapping out our current ("as-is") business processes and collaborating with senior stakeholders to design smarter ("to-be") workflows. Assisting senior analysts and technical teams in gathering, defining, and documenting business requirements for new software or system rollouts. Acting as a translator between our technical/data teams and our operational staff, ensuring everyone understands the commercial impact of our processes. What we’re looking for: A highly analytical and logical mindset with a genuine passion for taking things apart to see how they work. Strong proficiency in data analysis (exposure to SQL or BI tools like Power Bi is a huge bonus). Excellent communication and stakeholder management skills; you must be comfortable explaining complex data or processes in plain, jargon-free English. A proactive, tenacious attitude. You don't just report on problems; you want to be part of the solution. Someone ambitious who wants a role that offers a clear, supported progression path into wider Business Analysis or Architecture. Benefits: Up to £35,000 basic salary (dependent on experience) Healthcare cash plan Your birthday off after a year of service Generous staff discount scheme across all our brands Free onsite parking REF-(Apply online only)

Our client is a well-established Chartered Accountancy Practice based in Huddersfield, seeking an AAT qualified Semi Senior Accountant to join their growing firm on a full time, permanent basis. The ideal candidate will have experience working within an Accountancy Practice and will be AAT qualified. We are looking for an AAT qualified accountant who has experience with year-end accounts within an accountancy practice. You will be preparing statutory accounts and other accountancy services for a client base of 500 clients. Semi-Senior Accountant Job Overview The successful Semi Senior will be tasked with assisting the Senior with running a portfolio of clients, preparing accounts, VAT returns, preparing CT computations and SA tax returns. Preparing accounts for a portfolio of clients which is a mixture of sole traders, Limited Companies and partnerships Preparation of Corporation Tax computations for Limited Companies Preparing basic Self-Assessment Tax returns Developing strong relationships with the clients within the portfolio Preparation of periodic bookkeeping and management accounts Semi-Senior Accountant Job Requirements AAT qualified Experience within an Accountancy Practice is required Good knowledge of Sage 50 Accounts & Xero Knowledge of IRIS is advantageous. Able to work under pressure and meet deadlines Eligible to work within the UK and based within a reasonable commute of Huddersfield Semi-Senior Accountant Salary & Benefits Salary: £27,000 - £30,000 per annum dependant on experience 5 hours per week (half hour for lunch) Annual leave 23 days + bank holidays Pension Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. TPBN1_UKTJ

CRM Administrator Elland, HX5 (Fully Onsite) Up to £35,000 + Benefits Your new role As a CRM Administrator, you will work closely with our existing team of CRM/ERP Administrators to provide first-line support to users globally. Resolving day-to-day issues and maintaining data quality through regular audits and cleansing. You'll manage user access, assist with basic system configurations, and support the roll-out of new features. The role involves creating user documentation, delivering training, generating reports, and gathering feedback to drive continuous improvement. Strong communication skills are essential, as you'll act as a link between end users and technical teams, ensuring smooth operation and adoption of the CRM/ERP systems. Responsibilities Keep ERP and CRM users moving by picking up, prioritising and resolving a high volume of tickets, from simple "how do I…?" questions through to more complex admin and configuration tasks. Act as a trusted first line of support for colleagues across sales, operations, purchasing, finance and other teams, choosing the right way to communicate and keeping users updated on progress. Play a key role in importing and maintaining data, including exhibition leads and other prospect lists, so that sales teams have accurate information to work with. Help us embed and stabilise a new CRM environment, getting up to speed quickly and contributing feedback as we roll out new processes and tools. Spot recurring issues and opportunities to improve, documenting fixes and creating clear, user-friendly guides so the wider business can self-serve where appropriate. Stay organised when priorities change, making clear decisions about what needs to be done first and flagging anything that could pose a risk to the business. Work closely with a small, busy team where everyone rolls up their sleeves, shares knowledge and supports each other through peaks in demand. Experience needed Clear experience working with ERP and/or CRM systems in a support, admin or superuser capacity, with a real focus on CRM and user experience. Evidence that you've handled a high volume of tickets or tasks, kept on top of your workload and managed changing priorities. Strong communication skills, both written and verbal, with the confidence to support users at different levels of the business, including colleagues whose first language isn't English. Proven problem-solving skills: you're curious, ask good questions and enjoy working through issues to find the root cause rather than just a quick fix. Confident using Microsoft Office tools, particularly for tracking, reporting and creating simple documentation. Real attention to detail, especially when working with data, updating records in bulk or producing user guides and process notes. A resilient, agile mindset - you're comfortable in a fast-paced environment where plans can change and you're trusted to manage your own workload. Benefits A subsidised on-site gym, available for all colleagues. Flexible start and finish times to fit around you and your lifestyle. Enhanced Maternity, Paternity and NICU pay. 25 Days holiday plus bank holidays with the option to buy more. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Quality (Assurance and Improvement) Lead Full Time – 37.5 hours Homebased with travel across assigned regions (including overnight stays) Salary: £41,899.25 + Car Allowance + Home Working Allowance + Travel Expenses Our Mission: The Best Life Possible Our client is a large care and specialist housing organisation supporting adults with learning disabilities and complex needs, including autism, physical disabilities, mental health conditions and dementia. They are currently undergoing an exciting period of strategic change and are looking for an experienced Quality Assurance and Improvement Lead to play a pivotal role in driving quality, compliance and continuous improvement across services. If you are passionate about raising standards, using data to drive improvement and supporting services to achieve Good and Outstanding regulatory ratings — this could be the perfect next step in your career. The Role Reporting to the Head of Quality and Improvement, you will: Lead and deliver internal audits in line with the Quality Assurance Framework Drive the Quality Improvement Strategy across your allocated regions Support registered services to meet regulatory, statutory and organisational KPIs Provide expert advice on incidents, safeguarding, compliance and risk Analyse trends, themes and data to identify improvement opportunities Support managers to achieve and maintain CQC / CIW compliance Deliver improvement initiatives that enhance outcomes for the people supported Monitor training compliance and governance processes Share learning from incidents, complaints and reviews to embed best practice Work collaboratively with operational and governance colleagues to ensure safe, high-quality services This is a highly visible role requiring strong organisational skills, the ability to influence at all levels and a proactive, solutions-focused mindset. Travel (including overnight stays) is required. About You We’re looking for someone who brings both technical expertise and the ability to inspire positive change. You will have: A Level 5 qualification (or equivalent) in Health & Social Care Experience conducting audits and leading quality improvement work in health and/or social care Strong working knowledge of CQC / CIW regulations and inspection frameworks Experience analysing data and producing meaningful reports A solid understanding of compliance, governance and risk management systems Excellent communication skills, with the ability to build strong stakeholder relationships The confidence to make evidence-based, risk-informed decisions Desirable (but not essential): Recognised audit qualification (ISO, Lean Six Sigma or similar) Project management experience Experience leading services rated Good or Outstanding Why Join Our Client? Competitive salary with car allowance and home working allowance A key strategic role within a values-driven organisation Opportunity to shape and influence quality across multiple services Work within a collaborative Quality & Governance team Make a genuine impact on the lives of people with learning disabilities If you are motivated by continuous improvement, thrive in a dynamic environment, and want to ensure people receive safe, high-quality care that enables them to live their best lives, we would love to hear from you. Apply today and be part of driving excellence in care and support

Job Title: HR & Payroll Manager Location: Halifax Salary: £45,000 Type: Permanent || Full Time Hours: 42.5 hrs PW || Monday - Friday 08:00 am - 17:00 pm || Office Based (No Hybird) Overview The Flavour Network is recruiting on behalf of a well-established, fast-paced manufacturing business based in Halifax for an experienced HR & Payroll Manager. In this role, you will take full ownership of payroll operations and HR administration across the organisation, overseeing all aspects of payroll processing and HR activities to ensure compliant, efficient, and accurate processes across payroll, onboarding, employee relations, and overall HR compliance. This is a hands-on, fully on-site position requiring strong technical payroll expertise and confident HR operational capability. The successful candidate for the HR & Payroll Manager must hold CIPD Level 5 and demonstrate expert proficiency in Sage Payroll. We are seeking a highly organised, detail-oriented professional who thrives in a fast-paced environment and is confident managing both payroll accuracy and day-to-day HR responsibilities. Key Responsibilities for the HR & Payroll Manager: Payroll Management (Sage Payroll) * Manage end-to-end monthly payroll (Apply online only) people) using Sage Payroll, ensuring full accuracy and compliance. * Oversee weekly payroll and provide holiday cover as required. * Administer statutory payments, pensions and auto-enrolment in line with UK regulations. * Complete HMRC RTI submissions (FPS, EPS) and year-end processes (P60, P45, P11D). * Ensure compliance with HMRC legislation, National Minimum Wage and holiday pay regulations. * Reconcile payroll with Finance and manage employee payroll queries HR Administration & Employee Relations: * Oversee the full employee lifecycle from recruitment through to exit. * Draft contracts and offer letters, and manage HR documentation. * Support managers with absence, performance, disciplinary and grievance matters. * Maintain HR policies and ensure compliance with UK employment law and GDPR. * Maintain accurate HR records and track leave and absences to ensure payroll accuracy. Compliance & Reporting: * Produce HR and payroll reports and KPIs for senior management. * Support annual pay reviews, payroll budgeting and cost control. * Maintain up-to-date knowledge of employment law and payroll legislation. Requirements for the HR & Payroll Manager: * CIPD Level 5 (essential) * Minimum 3 years’ payroll experience running end-to-end payroll independently. * Expert proficiency in Sage Payroll (essential). * Strong understanding of UK employment law, payroll regulations and statutory processes. * Experience in a fast-paced environment (hospitality, retail or multi-site advantageous). * Excellent attention to detail and problem-solving ability. * Strong communication skills with the ability to support managers and employees across all HR matters. * Highly organised, professional and confidential in approach. * Ideally, a 30-minute commute to Halifax is desirable. If you meet the essential criteria, particularly CIPD Level 5 and strong Sage Payroll experience, we would love for you to apply

Trade Counter Sales Executive (Builders Merchant / UPVC) £30,000 - £34,000 DOE + Product Training + Bonus + Early Friday Finish + Company Benefits Birstall Are you a builder's merchant or customer service professional with knowledge of UPVC, windows, or door hardware, looking to join a well-established family business? Established over 30 years ago, this family-run business supplies high-quality UPVC, window, and door hardware to tradespeople, locksmiths, and DIY customers across the UK. Known for its technical expertise and exceptional service, the company has built a strong reputation as a trusted partner in the industry. In this role, you will assist customers at the trade counter and over the phone, identify and supply the correct parts, manage stock, and provide technical advice. You'll support both trade professionals and DIY customers, helping to ensure smooth day-to-day operations and excellent service. This role would suit a customer-focused sales or service professional with knowledge of UPVC, windows, or door hardware, who enjoys working in a hands-on, supportive, family-run environment. The Role: Assist customers at the trade counter, over the phone, and via email Identify and supply the correct UPVC, window, and door parts Provide technical advice and guidance to customers Manage stock levels and help with stock replenishment Promote products and support upselling opportunitiesThe Person: Strong customer service or sales skills, with a friendly and professional approach Technical knowledge or interest in UPVC, windows, and door hardwareIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Keywords: UPVC, Window Parts, Door Hardware, Trade Counter, Sales Advisor, Customer Service, Technical Sales, Product Knowledge, DIY, Inbound Sales, Leeds, West Yorkshire Reference Number: BBBH24098B We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skillset. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website

Monday - Friday 7AM-5PM We are seeking a reliable and hard-working Site Operative to support the day-to-day operation and ensure work is carried out safely and efficiently. You'll play a key role in supporting site activities and maintaining high standards of safety. Roles and Responsibilities Sorting, bulking and preparing waste for offsite disposal. For example, baling of plastic waste, bulking of paint tins, bulking of aerosols, sorting of non-hazardous wastes for landfill Ensuring all waste is stored safely in designated areas Offloading/loading vehicles with forklift Assisting drivers with loading/unloading vehicles Informing technical team when loads need to be booked out of site/skips exchanged Fulfil orders in a timely and efficient manner Look after related plant and equipment Accepting deliveries General housekeeping on site Follow systems of work in place for your safety Take care to make sure your activities do not put others at risk Any other reasonable requestSkills and Experience Experience of working within a similar environment would be beneficial Full UK driving license - essential FLT license - desirableWe are Panda. We value waste. We’re in the business of waste management but that doesn’t just mean collecting bins. Behind every collection is a passionate team of people finding smarter, safer, and more sustainable ways to recycle and repurpose materials that would otherwise go to waste. Over the past 30 years, Panda has grown into a leading resource recovery business, bringing together almost 3,000 people across multiple brands, united by a shared vision and strong values. While our operations are diverse, our purpose is clear: to protect our people, support our customers, and create positive impact for the communities and environments we serve. At Panda, people are at the heart of everything we do. We work as one team, combining different skills, experiences, and perspectives to achieve shared goals. We care for each other’s wellbeing, encourage development, and support growth because we know we’re stronger together. We expect excellence in how we operate. High standards, bold thinking, and continuous improvement drive our passion for innovation. We challenge the ordinary, put safety first, and embrace new ideas while delivering practical, cost-effective solutions that move our business forward. We own what we do. From day-to-day tasks to major projects, we take pride in our work and responsibility for the outcome. We don’t walk past problems we address them together. Our expertise, reliability, and care reflect who we are and the difference we make. And above all, we act with trust and integrity. Trust is built through open communication, honesty, and accountability. It allows us to move quickly, make confident decisions, and deliver results — knowing our people are empowered to do the right thing. Our journey depends on talented, committed people who want to make an impact. Take the first step and join us on the journey. Panda is committed to attracting and retaining a skilled and diverse workforce that reflects the communities in which we operate and the people we serve. (DE&I Policy Statement)

Mechanical Maintenance Engineer - double days Location: Batley Are you a proactive and skilled Mechanical Maintenance Engineer looking to make a real impact? Our client, a reputable organisation in Birstsal, is hiring for a dedicated professional to join their engineering team. This is a fantastic opportunity to work in a dynamic environment where your expertise will help optimise plant performance and ensure smooth production operations. What you'll be doing: * Carry out frequency-based Preventive Maintenance plans across all site areas, ensuring compliance with site standards and rectifying any issues found. * Diagnose breakdown causes and perform repairs efficiently to minimise downtime and keep production running smoothly. * Install new equipment in line with organisational and regulatory standards, and contribute to project plans for new installations. * Suggest modifications and improvements to equipment, plant, and processes to enhance efficiency and reliability. * Calibrate instrumentation such as weighing systems, flow control devices, and level indicators to ensure accurate operation. * Provide technical advice, training, and support to managers, supervisors, staff, and external contractors regarding electrical and mechanical systems. * Maintain a clean and organised workshop and plant areas through effective 5S practices and housekeeping. * Contribute to business process improvements by monitoring equipment performance trends related to efficiency, quality, and waste. * Respond promptly to reactive maintenance requests to reduce machinery downtime and minimise impact on production. What you'll bring: * Strong knowledge of mechanical systems, equipment installation, and calibration. * Ability to diagnose faults quickly and perform effective repairs. * Experience in implementing preventive and reactive maintenance strategies. * Good understanding of electrical and mechanical safety standards and regulations. * Excellent communication skills to support training and collaborate with teams and contractors. * Proactive mindset with a focus on continuous improvement and efficiency. Required skills and qualifications: * Proven experience in mechanical maintenance within a manufacturing or industrial environment. * Familiarity with calibration of instrumentation such as weighing, flow, and level systems. * Knowledge of health and safety standards relevant to plant maintenance. * Ability to work independently and as part of a team. This is a fantastic chance to join a forward-thinking organisation committed to excellence. If you're ready to bring your skills to a role that values initiative and technical expertise, we'd love to hear from you. Apply now and take the next step in your engineering career

A place to drive change Location: Bradford/Burnley/Stockton, Hybrid Salary: £43,294 per annum Contract Type: Permanent Hours: 35 hours per week, Monday – Friday 9am to 5pm. We’re on a journey of transformation. We’re finding new ways to achieve our purpose of providing families with affordable, sustainable and safe homes. We’re innovating for our customers and to create a thriving workspace that supports everyone. We’re a team of passionate, dedicated people, working to drive change for the better. We’re building something special here and we want driven, creative people to join us. If you’re looking for a career where you can be part of change, share your ideas and help us transform, there’s never been a more exciting time to join us and shape our future. Join our Transformation Journey Are you energised by turning strategy into action? Do you thrive in fast paced environments where you’re working with senior leaders, shaping priorities, and helping teams deliver meaningful change? If so, this could be your next big opportunity. As a Project Portfolio Management Analyst, you’ll play a pivotal role in embedding best practice project delivery across the organisation. Reporting directly to the Head of Business Transformation, you will: Shape How We Deliver Change Work with Executive and Leadership Teams to influence priorities and continuously improve PMO frameworks and standards. Drive High Quality Portfolio Management Ensure accurate portfolio reporting, strong governance across project lifecycles, and high impact insights for senior leaders. Support People and Performance Coach project teams and guide performance to embed best practice and strengthen delivery capability, while also providing line management to our Portfolio Coordinator. Make a Meaningful Impact Play a key role in delivering strategic initiatives and driving long term organisational success within a collaborative, forward thinking team. Salary The spot salary for this post is £43,294 per annum for applicants who fully meet the requirements of the post. If you’re still developing some of the skills or experience, you can start at a salary 5% or 10% below the spot rate, with clear support and progression opportunities to reach the full amount. About you Strong knowledge of project management methodologies, governance principles, and PMO best practices. Proven experience supporting project lifecycles or working in a PMO environment. Proficiency in project management tools such as MS Project, JIRA, or similar software. Excellent analytical and problem-solving skills, with the ability to synthesise complex information and provide actionable insights. Strong understanding of project management methodologies (e.g., Agile, Waterfall) and associated tools. Experience working in a fast-paced environment with multiple projects running concurrently. Strong stakeholder management skills, with the ability to build collaborative relationships and gain buy-in from challenging stakeholders. Excellent communication skills, both verbal and written, with the ability to present complex information to both technical and non-technical audiences. A place to build a future We’ve got big ambitions and we’re looking for people who want to grow with us. Here, you’ll have the chance to learn new skills, shape your career, and thrive in a collaborative environment where your ideas matter. And because we believe great work deserves great rewards, here’s what you can look forward to: Generous time off – 28 days holiday plus bank holidays, an extra day for your birthday, and the option to buy more Health & wellbeing support – Cash health plan, Health MOTs, online GP access, gym discounts, and a dedicated volunteering day for a cause you care about. Financial perks – Car leasing options, salary sacrifice schemes, and exclusive discounts through our benefits platform to help your money go further. Future-focused benefits – Access to both Defined Contribution and Defined Benefit pension schemes through salary sacrifice, plus life assurance at three times your salary for peace of mind. Family-friendly policies – Enhanced parental leave, flexible working options, and support for work-life balance. Career development – From Stepping into Management and Management Essentials training to our Leadership Academy, apprenticeships, and more – we’ll help you grow and succeed. This is more than a job – it’s a place where you can make an impact, feel valued, and be rewarded for what you do. Please don’t delay in submitting your application. Where roles are urgent or we receive a high volume of applications, we may interview and conclude the process prior to any closing date indicated. Please note candidates must have current eligibility to live and work in the UK, Accent do not currently hold a sponsorship license. If you’re looking for a place you can make a positive difference to society, to our organisation and to your future, apply now. Recruitment Agencies: We work exclusively with partners on our preferred supplier list (PSL) and do not accept unsolicited CVs or speculative approaches from agencies for this role. You may also have experience in the following:Project Portfolio Management Analyst, PPM Analyst, PMO Analyst, Portfolio Analyst, Project Management Office Analyst, Project Governance Analyst, Business Transformation Analyst, Change Management Analyst, Project Controls Analyst, Programme Management Analyst, Portfolio Reporting Analyst, Transformation PMO Analyst, Strategic Projects Analyst, Project Performance Analyst etc REF-(Apply online only)

Cubed Talent are proud to be recruiting an exceptional Procurement Manager to join a market-leading engineering and machine tool manufacturer. This is a high-impact leadership role where technical procurement, supplier strategy, and people development come together to support complex, precision-led manufacturing operations. If you’re a proactive, technically fluent procurement leader who thrives in high-spec engineering environments, and you’re ready to shape a capable, modern and professional procurement function, this role offers the ideal platform. The Opportunity As Procurement Manager, you will drive sourcing strategy across precision mechanical, electrical, software and automation components, working with cutting-edge technologies and advanced manufacturing suppliers. You’ll act as the key interface between Procurement, Engineering, R&D and Production, ensuring supply solutions align with product development and long-term operational goals. Alongside your strategic remit, you’ll lead and develop a team of Senior Buyers, Buyers and Purchasing Administrators, embedding best practice, developing capability and ensuring operational excellence across multi-site operations. Key Responsibilities Strategic Sourcing & Category Leadership Develop and execute sourcing strategies for precision-engineered mechanical, electrical and software-integrated components. Identify, assess, and onboard suppliers with advanced capabilities such as CNC machining, robotics, automation systems, and high-spec fabrication. Drive category strategies that support innovation, cost optimisation, and long-term supply resilience. Supplier Management, Negotiation & Compliance Lead complex negotiations with global suppliers, securing competitive pricing and quality assurance for high-value engineered components. Manage supplier risk, compliance and sustainability across an international supply base. Cross-Functional Collaboration Partner with Engineering, R&D and Production teams to ensure procurement aligns with product lifecycle, new product development and technical requirements. Cost & Risk Management Lead cost-reduction initiatives through value engineering, strategic negotiations and supplier-led innovation. Monitor global market trends, emerging technologies and geopolitical risks to inform sourcing strategy. Build proactive mitigation plans to protect supply continuity and commercial stability. Team Leadership & Development Lead, mentor and develop a team of Senior Buyers, Buyers and Purchasing Administrators. Set clear objectives, monitor performance and build a culture of continuous improvement. What You’ll Bring Degree in Engineering, Supply Chain or related discipline (CIPS preferred). 5+ years’ experience in procurement within advanced or high-tech manufacturing. Proven success sourcing precision-engineered components and managing complex supplier contracts. Strong understanding of manufacturing processes, tolerances and quality standards (ISO etc.). Experience of global sourcing, supplier audits and contract law. Proficiency with ERP/MRP systems and modern procurement tools. Skills & Personal Attributes Strategically minded with strong technical fluency. Excellent negotiation, influencing and conflict-resolution skills. Effective stakeholder engagement across engineering, operations and finance. Commercially astute with robust risk management capability. Strong leadership skills with a passion for developing people and teams. Ambitious, driven, and skilled at achieving challenging targets. Why Join? This role offers the chance to lead procurement at the heart of a technically demanding, innovation-driven engineering environment. You’ll shape supply strategies, influence new technologies, and develop a high-performing team—while enjoying a strong reward package: circa £65k salary + up to 15% bonus 33 days annual leave Flexible working hours Bupa health insurance & health cash plan Enhanced pension Life assurance Ready to lead procurement in a business where engineering excellence starts with you? Apply today with a full CV or contact Jess Heywood for a confidential initial chat on (phone number removed)

We are the internal recruitment partner for our client, a well‑established UK manufacturing organisation specialising in building products. We are searching for an experienced Multiskilled Maintenance Engineer with a strong electrical background to join their on‑site engineering team. This is a hands‑on role, supporting a wide range of production machinery, facilities equipment, and new engineering projects across the factory. Working as part of a small but highly skilled engineering team, you will play a key role in maintaining machinery uptime, diagnosing faults, carrying out planned maintenance, and ensuring all equipment remains safe, reliable and efficient. Responsibilities: Diagnose, troubleshoot and repair electrical and mechanical faults on production machinery Maintain, service and modify equipment to improve safety, reliability and efficiency Conduct planned maintenance and respond to urgent breakdowns Work on polystyrene cutting machines, CNC hot‑wire systems, sensors, switches and 3‑phase equipment Perform testing, commissioning and fault‑finding on plant and systems Support installation and integration of new machinery Provide technical advice to production teams and recommend machinery improvements Ensure compliance with BS/EN standards, health & safety rules, and site procedures Carry out general site electrical work, including lighting and small equipment repairs Contribute to lean manufacturing, 5S and continuous improvement practicesThe successful candidate will be able to demonstrate the following: Strong electrical bias with experience working on 3‑phase systems, sensors, relays and industrial machinery Confident in diagnosing and repairing electrical and mechanical faults Relevant engineering qualification in Mechanical, Electromechanical or Electrical Engineering 17th or 18th Edition Wiring Regulations (essential) NVQ Electrical qualification & City & Guilds (essential) Good mechanical understanding, including hydraulics and pneumatics Flexible and adaptable to new technologies and machinery Experience with lean manufacturing/5S (advantageous) Welding skills (advantageous)Working Hours & On Call: Monday-Friday: 08:00 - 16:30 Occasional Saturday morning shift: around once per month (06:00 - 12:00) On‑call rota: 1 week in every 5-6 weeks, covering 16:30 - 22:00 (site close) On‑call payment: £75 for weekdays and £150 for weekends (weekend call‑outs are very rare). Overtime is payable at time and a half. If called out, an additional 1 hour of travelling time is paid Overtime is available outside normal weekday working hours as and when required.In return we are offering: Salary: £38,000, rising to £40,000 upon successful completion of 6‑month probation 25 days of holidays (with 2 to be saved for Christmas shut down) + bank holidays Interested? Then APPLY now for immediate consideration

Associate IT Service Delivery Manager Salary: £33,500 – £37,000 Location: Morley / Hybrid Contract: Full-time Reporting to: Senior Service Delivery Manager Travel: A full UK driving licence is essential as regular travel to Evri operational sites will be required. Are you an enthusiastic IT professional looking to take the next step in your Service Delivery career? Evri is looking for an Associate IT Service Delivery Manager to support our Service Delivery team and help ensure our IT services deliver consistent value across a fast-paced, rapidly evolving organisation. This is a great opportunity to broaden your service management experience, build strong relationships across the business, and play a key role in maintaining high-performing IT services that keep Evri moving. About the Role As an Associate IT Service Delivery Manager, you'll support the management of critical IT services, oversee the performance of strategic IT vendors, and act as a key point of contact for operational stakeholders. You'll ensure that services are reliable, well-documented, and continuously improving, while gaining exposure to service transition, change, incident, and problem management. What you'll be doing Managing assigned IT services, internal IT functions, and vendors in line with ITIL best practice. Supporting Service Design and Transition activities, reviewing Service Impact Assessments, and maintaining the IT Service Portfolio. Monitoring and reviewing day-to-day vendor performance. Holding regular service reviews with stakeholders and suppliers to drive improvements. Creating service and performance reporting packs for operational and IT audiences. Contributing to Incident, Problem, and Risk Management processes with operational insights. Managing high-priority escalations directly or via the Incident Management team. Attending CAB meetings and communicating change impacts to stakeholders. Delivering small service improvement projects within your assigned business area. Identifying opportunities for cost savings across your IT services. What we're looking for Qualifications Degree-level education or equivalent experience. ITIL 4 or ITIL V3 Foundation (ITIL 4 Practitioner in Supplier Management desirable). Knowledge & Experience 3+ years in IT roles. 1+ year in Service Delivery roles. Background in technical IT roles (applications/hardware lifecycle) desirable. Experience in operational logistics is a plus. Strong understanding of ITIL and project management processes. Technical & People Skills Excellent relationship and stakeholder management. Strong written and verbal communication skills. Proficient in Microsoft Office. Confident Jira user. Experience working within an ITIL best-practice environment. Understanding of application and hardware life cycles. Awareness of project management life cycles. Full UK driving licence (regular travel essential). TPBN1_UKTJ

Please review the key dates below and ensure you are available during the relevant stages of the process: Applications open – Monday 2 March 2026 Applications close – Sunday 22 March 2026 Please ensure your application is submitted before 23:59 on Sunday 22 March 2026, as late applications will not be considered. Interview period – Weeks commencing 13 and 20 April 2026 If shortlisted, you will be invited to attend an interview during this window. Please ensure you are available across these weeks. Offer decisions – Week commencing 27 April 2026 Successful candidates will receive a formal offer during this week. Apprenticeship start date – September 2026 The programme will commence in September 2026. Candidates must be available to start at this time. We encourage you to consider these dates carefully before applying to ensure you can fully commit to each stage of the recruitment process and the programme start date. ABOUT USWith 30 years of industry expertise, Apogee supports organisations of all sizes and sectors by streamlining their IT needs through a single point of contact. As an independent subsidiary of HP Inc, we have the advantage of being part of one of the world’s leading technology companies, with instant access to the latest innovation all supported by our market leading service operations. Our core values - Integrity, Passion, Courtesy & Respect, Inclusivity, Knowledge, People, and Flexibility - shape our culture and guide our actions. We prioritise ethical business practices, fostering relationships and promoting diversity and inclusion. Our culture allows you to innovate and develop your career with the support of an expanding corporate and progressive organisation. We are looking for inspiring and pioneering individuals, who want to make a difference in their careers as well as in the world around them. We are proud of all our employees, who are at the heart of what we do. If you become part of our journey, everything is possible, and the opportunities are endless. At Apogee Corporation, we believe that true innovation flourishes when everyone is free to be their authentic selves. As an Equal Opportunity Employer, we are committed to creating an inclusive environment where every unique perspective is valued and celebrated. We draw on the richness of our differences—across age, gender, gender identity, gender expression, ethnicity, sexual orientation, disabilities, religion, and beliefs—because we know that our collective strength lies in our diversity. Here, your individuality drives our shared success, and we actively encourage you to bring your whole self to Apogee. Please take the time to look at our excellent Trustpilot reviews We have been awarded “Customer Experience Foundation Membership” showing our commitment to excellent customer service. JOB DETAILSThis role is subject to an Enhanced Disclosure and Barring Service check. As the position is exempt from the provisions of the Rehabilitation of Offenders Act 1974, applicants must declare all spent and unspent convictions, cautions, reprimands, and final warnings that are not protected under the Exceptions Order 1975. The opportunity As an Apprentice Technician, you will work towards a Level 3 Apprenticeship in Electrical, Electronic Product Service and Installation Engineering. This is a hands-on, customer-facing role where you will build the technical expertise and confidence required to progress into a Service Engineer position. You will gain practical IT engineering experience across a range of sectors, supporting customers both on site and within our operations centre. Working with high-specification printers, laptops, and commercial hardware, you will learn how to install, configure, test, maintain, and repair business-critical equipment. Alongside developing strong fault-finding and diagnostic skills, you will enhance your customer service capability by delivering clear communication and a professional, solutions-focused experience. What you will learn Installation, testing, and safe handling of electrical and electronic products Fault diagnosis and repair across printers and IT equipment Safe transportation and protection of technical equipment End-to-end servicing processes for commercial devices Professional customer engagement and service excellenceAbout the apprenticeship Hours 8.30-5.30 Monday to Friday Level 3 Apprenticeship in Electrical, Electronic Product Service and Installation Engineering Delivered in partnership with Lincoln and Newark College Two-year structured programme Open to applicants of all agesTraining schedule Every six weeks, you will attend Newark College from Monday to Thursday, with Friday allocated to remote learning. Travel and overnight accommodation will be provided during college attendance weeks. Location You will be assigned to an on-site location. Applicants should live within a reasonable and reliable commuting distance. Eligibility Right to work in the United Kingdom. Level 2 qualification in Mathematics and English Language. Applicants who do not already hold these qualifications must be willing to undertake and successfully complete the required Level 2 Functional Skills as part of the apprenticeship. Relevant experience or demonstrable practical interest in engineering, IT hardware, electronics, or a related technical field - this may include work experience, college projects, or hands-on personal interest. Full, valid United Kingdom driving licence, with the ability and confidence to travel to customer sites.Logistics Ability and commitment to attend block release training at Newark College every six weeks, Monday to Thursday, with Friday allocated to remote learning. Residence within a reasonable and sustainable commuting distance of the assigned site. Willingness to accept the National Minimum Wage in line with apprenticeship regulations.Motivation and personal qualities Clear and genuine interest in engineering and technology, demonstrated through application responses. Willingness to learn, develop, and commit to completing a two-year apprenticeship programme. Logical and methodical approach to problem-solving, with resilience when diagnosing faults. Professional, customer-focused attitude with strong communication skills. Reliable, punctual, and accountable in managing workload and travel requirements. Positive, adaptable, and motivated to build a long-term career in field service engineering.BENEFITS Flexible working options 33 days holiday including bank holidays Holiday purchase scheme Enhanced family friendly benefits (maternity, adoption, paternity and IVF) 2 paid days off per year for voluntary work to support our local communities Staff Reward Scheme Pension scheme Life assurance 4 x salary Sponsorship for professional development and memberships Employee Assistance Programme, including access to a virtual GP and financial wellbeing support Mental health first aider support programme Cycle2work scheme Discounted Gym Membership Eye care voucher scheme Free flu vaccinations Employee social events and recognition activities throughout the year HP Employee discount programmes Mobile phone discountsWHY JOIN APOGEEAt Apogee, our values – Integrity, Passion, Courtesy & Respect, Inclusivity, Knowledge, People and Flexibility – shape everything we do. They guide how we work with clients and colleagues, drive ethical practices and create an environment where you can grow, innovate and develop your career within a progressive, expanding organisation. We are looking for inspiring individuals who want to make a real impact in their careers and the world around them. Diversity and inclusion are at the heart of our success. We know true innovation flourishes when people can be their authentic selves. As an Equal Opportunity Employer we welcome applications from all backgrounds, and we actively value different perspectives across age, gender, ethnicity, sexual orientation, disability, religion and belief. Your individuality drives our shared success, and we encourage you to bring your whole self to Apogee. We support flexibility and accessibility. If flexible working is important to you, please include this alongside your salary expectations in your application so we can discuss it early in the process. If you have a disability or health condition and require adjustments during the recruitment process, please contact our Talent Team on (phone number removed) – we are committed to making your experience inclusive and accessible. We are proud to support the Armed Forces community. We hold a Bronze Award in the Armed Forces Covenant and welcome applications from Reservists, Veterans, Cadet Force Adult Volunteers and military families. Our award-winning customer service speaks for itself – take a look at our excellent Trustpilot reviews and our “Customer Experience Foundation Membership” accreditation. Our application form is quick and easy – no need to repeat your entire CV! Apogee may close this advert early if enough applications are received, so we encourage you to apply promptly

Bid Writer £35,000 – £40,000 | West Yorkshire / North West | Hybrid Considered Shape the Voice of a Growing Construction Business Our client, a well-established and highly respected construction contractor operating across the North of England, is entering an exciting phase of continued growth. With a strong pipeline of commercial, healthcare, education, industrial and residential projects, they are now seeking a talented Bid Writer to play a pivotal role in securing future work. This is not just a writing role. It’s an opportunity to influence how the business presents itself, wins work, and strengthens its professional reputation. The Opportunity We are looking for a university-educated Bid Writer with genuine creative flair — someone who can turn technical construction detail into compelling, persuasive content that stands out in competitive tender environments. You will work closely with directors, estimators, and site teams, shaping raw information into polished submissions that reflect the company’s quality, professionalism, and delivery capability. If you enjoy transforming technical input into powerful narratives — and you take pride in producing documents that look as good as they read — this role offers real scope to make your mark. What You’ll Be Doing * Writing and managing high-quality tender submissions, PQQs and proposals * Crafting engaging, structured responses aligned to scoring criteria * Collaborating with commercial and site teams to extract key technical information * Elevating the visual and written presentation of bid documents * Developing a bid content library and improving processes * Supporting wider marketing and promotional initiatives * Ensuring every submission reflects a professional, confident and credible brand What We’re Looking For * Degree educated (English, Marketing, Communications, Construction Management or similar) * Proven bid writing experience (construction or built environment preferred) * Exceptional written English with a natural storytelling ability * Strong attention to detail and ability to meet tight deadlines * Confidence engaging with senior stakeholders * Advanced Microsoft Office skills * Experience with design software (e.g., InDesign, Canva or similar) would be a distinct advantage Why This Role? * £35,000 – £40,000 salary (DOE) * Opportunity to take ownership of the bid function * Influence real business growth * Work within a collaborative, ambitious team * Long-term career development potential This is an excellent opportunity for a creative and commercially aware Bid Writer who wants more than just producing documents — someone who wants to help shape the professional image and future success of a thriving construction business

Bennett and Game has the pleasure of working with a reputable client based in Huddersfield, who are now seeking a Senior Architectural Technologist to join their multi-disciplinary construction consultancy to work on high-rise residential and new build residential housing developments. The successful Senior Architectural Technologist will have an integral role shaping the future of housing and regeneration projects in the area. They are known for tackling complex projects with both creativity and technical precision. This is an exciting opportunity for a Senior Architectural Technologist to be part of a dynamic team that drives change, builds communities and leaves a lasting mark on the built environment. Senior Architectural Technologist Salary & Benefits Up to £50,000 per annum depending on experience Car allowance Up to 30 days annual leave plus bank holidays 9-day fortnight rota option for flexible work/life balance opportunities Bonus schemes 3-5% Contributory pension scheme Company car options Four times salary life assurance Regular performance and salary reviews to ensure Opportunities for progression Payment of Professional Institute training/examination fees/ subscription fees Excellent fully funded training programme with regular in-house CPD events to support career development Enhanced maternity and paternity benefits Long service rewards Free eye tests Fun social & team building events organised & paid for by the company Other company benefits to be discussed Senior Architectural Technologist Job Overview Working on RIBA stages 2 to 6 on both new build and refurbishment residential schemes, including high-profile high-rise and large new build schemes. Working on multiple projects at once, producing working drawings and specifications and reviewing/editing similar work drafted by others; Creating Revit models for use from the initial stage of concept design to construction Creating drawings for planning, building control, and construction issues; On-site visits and liaising with contractors, offering technical guidance as needed Attending and chairing client design meetings Senior Architectural Technologist Job Requirements Technical detailing and knowledge Proficient with either Revit or AutoCAD Practical knowledge in Building and Planning regulations/procedures Able to work efficiently from home and in the office around the team Strong interpersonal, communication and written articulation skills A team player with the determination to drive projects forward Full UK driving license Live with a commutable distance of Huddersfield Strong/ proven experience within either the High-rise Residential or Housing SectorBennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for

Mechanical Site Project Manager - District Heating / Energy Centre Construction Job Description Overview The Mechanical Site Project Manager is responsible for leading the on‑site delivery of district heating and energy centre construction projects, ensuring mechanical works are executed safely, efficiently, on schedule, and to the required technical standards. This role oversees subcontractors, coordinates multidisciplinary site activities, manages project resources, and acts as the primary on‑site point of contact for clients, consultants, and internal project teams. Key Responsibilities Project Management & Delivery Lead the on‑site delivery of mechanical systems for district heating networks, energy centres, plantrooms, and associated infrastructure. Manage day‑to‑day site operations, sequencing, logistics, and work fronts to maintain progress against programme. Ensure installation aligns with design specifications, project drawings, technical standards, and client requirements. Oversee commissioning activities and support integration of mechanical systems with electrical, controls, and civil works.Site Coordination & Leadership Supervise mechanical subcontractors, ensuring high-quality workmanship and compliance with project schedules. Chair site coordination meetings and resolve technical or logistical issues that may impact progress. Liaise with project managers, design teams, consultants, and client representatives to maintain smooth project delivery. Provide clear daily briefings, toolbox talks, and instructions to site teams.Health, Safety & Compliance Ensure full compliance with CDM regulations, site safety procedures, RAMS, and industry best practice. Conduct regular site inspections and audits, mitigating risks and ensuring safe systems of work. Collaborate with HSEQ teams to uphold high standards and drive a strong safety culture.Quality Assurance Monitor installation quality, ensuring materials, workmanship, and methods meet specification. Review and sign off ITPs, test documentation, and quality records. Support validation, testing, and commissioning of mechanical plant and distribution networks.Commercial & Documentation Assist with monitoring site variations, progress reporting, and subcontractor performance. Review delivery tickets, site diaries, and progress records to support commercial reporting. Provide daily and weekly progress updates to senior management and stakeholders. Support cost control by managing resources, productivity, and avoiding rework.Experience & Qualifications Essential Proven experience delivering mechanical construction works on district heating, energy centres, plantrooms, or large‑scale MEP projects. Strong understanding of mechanical plant, LTHW systems, CHP/boilers/heat pumps, pipework, pumps, and distribution networks. Experience managing subcontractors and coordinating multi‑disciplinary site activities. Excellent knowledge of health & safety, CDM, and quality standards. Ability to read and interpret construction drawings, schematics, and technical specifications. Strong leadership, communication, and problem‑solving skills.Desirable Mechanical engineering qualification (HNC/HND/Degree or equivalent). SMSTS, CSCS Manager's Card, First Aid. Experience with commissioning procedures and BSR/Building Safety regulations. Experience on NEC or JCT contract frameworks.Competencies Leadership and team management Strong planning and organisational skills Technical competency in mechanical building services Stakeholder and client engagement Risk management and decision-making Commercial awareness Ability to work under pressure and resolve site issues proactivelyTypical Project Scope District heating energy centres (CHP, boilers, heat pumps, thermal stores) Underground distribution pipework and prefabricated network systems Plantrooms, skid units, pumping stations, heat exchanger installations Integration with BMS, controls, electrical systems Handover, testing, and commissioningPlease click to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. To find out more about Progressive please visit Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy | Registered office | 8 Bishopsgate, London, EC2N 4BQ, United Kingdom | Partnership Number | OC(phone number removed) England and Wales

CRM Support Technician Elland (Onsite) Up to £35,000 + Benefits Your new role As a CRM/ERP Support Technician, you will work closely with our existing team of CRM/ERP Administrators to provide first-line support to users globally. Resolving day-to-day issues and maintaining data quality through regular audits and cleansing. You'll manage user access, assist with basic system configurations, and support the roll-out of new features. The role involves creating user documentation, delivering training, generating reports, and gathering feedback to drive continuous improvement. Strong communication skills are essential, as you'll act as a link between end users and technical teams, ensuring smooth operation and adoption of the CRM/ERP systems. Responsibilities Keep ERP and CRM users moving by picking up, prioritising and resolving a high volume of tickets, from simple "how do I…?" questions through to more complex admin and configuration tasks. Act as a trusted first line of support for colleagues across sales, operations, purchasing, finance and other teams, choosing the right way to communicate and keeping users updated on progress. Play a key role in importing and maintaining data, including exhibition leads and other prospect lists, so that sales teams have accurate information to work with. Help us embed and stabilise a new CRM environment, getting up to speed quickly and contributing feedback as we roll out new processes and tools. Spot recurring issues and opportunities to improve, documenting fixes and creating clear, user-friendly guides so the wider business can self-serve where appropriate. Stay organised when priorities change, making clear decisions about what needs to be done first and flagging anything that could pose a risk to the business. Work closely with a small, busy team where everyone rolls up their sleeves, shares knowledge and supports each other through peaks in demand. Experience needed Clear experience working with ERP and/or CRM systems in a support, admin or superuser capacity, with a real focus on CRM and user experience. Evidence that you've handled a high volume of tickets or tasks, kept on top of your workload and managed changing priorities. Strong communication skills, both written and verbal, with the confidence to support users at different levels of the business, including colleagues whose first language isn't English. Proven problem-solving skills: you're curious, ask good questions and enjoy working through issues to find the root cause rather than just a quick fix. Confident using Microsoft Office tools, particularly for tracking, reporting and creating simple documentation. Real attention to detail, especially when working with data, updating records in bulk or producing user guides and process notes. A resilient, agile mindset - you're comfortable in a fast-paced environment where plans can change and you're trusted to manage your own workload. Benefits A subsidised on-site gym, available for all colleagues. Flexible start and finish times to fit around you and your lifestyle. Enhanced Maternity, Paternity and NICU pay. 25 Days holiday plus bank holidays with the option to buy more. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

About the role… We are excited to be recruiting for a Motor Vehicle Technician. This is an unrivalled opportunity to join one of the UK's fastest growing motor groups. As a Motor Vehicle Technician, you will be responsible for the service, repair and maintenance work for our customers' vehicles, readying them for the road ahead. Representing a variety of manufacturers and carrying out work on a diverse range of vehicles and models, you will take great pride in your work, taking complete ownership of your customers and completing your jobs to the highest standard. We genuinely believe that Stoneacre Motor Group is leading the way in EV training, and we are excited to share our knowledge and expertise with you. You will be working in an industry-leading workshop boasting state of the art facilities. Through both in house and manufacturer training, you will be given full support and development enabling you to reach your full potential, and elevate your career in EV Technology, all whilst contributing towards making Stoneacre the Number One Motor Group. Do we have your interest…? Here at Stoneacre we are committed to creating a diverse and inclusive workplace. It is our ambition to make Stoneacre the best place to work because we recognise that it is our people who make Stoneacre a success. So, what is in it for you? A flexible approach to working patterns - Choose your own hours! We are happy to discuss all flexible working options to help you achieve the work life balance that suits you Industry leading competitive salary Industry leading top level bonuses Dedicated manufacturer training Fast track to EV Level 4 Minimum 30 days holiday increasing to 34 days (pro rata basis) Industry leading career progression opportunities Contributory workplace pension scheme Uniform provided Long service reward Customer introduced reward Employee discounts Access to discounts on retailers, restaurants, holidays and much more Wellness programme Free parking An average day as a Motor Vehicle Technician… Utilising your expanding knowledge of our manufacturer's vehicles and features you will be responsible for the servicing, repair and diagnostics of our customers vehicles to an exemplary standard within our state of the art workshop Working as part of a capable and motivated team, you will complete all service paperwork to manufacturer and brand standards You will accurately and skilfully complete and provide diagnostic reports on our customers vehicles In accordance with manufacture, warranty and dealer requirements, you will complete relevant service documentation, including job sheets, PDIs and service reports. Upon the completion of jobs, through the use of diagnostic equipment and road testing, you will check the level and quality of work that has been carried out. About you… We consider candidates from all backgrounds who have experience working in the Automotive sector within a technical role As a minimum, you will be qualified to Level 2 NVQ, or equivalent, in Vehicle Maintenance and Repair You will have fantastic communication skills and thrive working in a challenging yet rewarding environment You will have the ability to work well under pressure - It will be your technical ability that will help you overcome any challenge that is thrown your way. An Electric and Hybrid vehicle qualification or certification would be advantageous but not essential as full training will be provided MOT Licence would also be beneficial but not essential Hold a full UK driving licence We want you to love what you do – The rest will come naturally. “Stoneacre Motor Group are an Equal Opportunity employer committed to diversity in the workplace. We pride ourselves on creating an inclusive work environment where our employees can thrive by being themselves." TPBN1_UKTJ

Bench Hand Joiner – Bradford Location: Bradford Salary: £15.50 – £17.00 per hour (PAYE, negotiable based on experience) + holiday pay Pay Rate: £15.00 – £17.00 per hour (depending on experience) Type: Ongoing Temp Work (with potential for a permanent role) SWIFT Temps Ltd – Engineering Division is recruiting for an experienced Bench Hand Joiner to join an established manufacturer in Bradford Key Responsibilities: * Construct and assemble high-quality custom joinery, furniture, and exhibition stands based on technical drawings. * Perform on-site modifications and adjustments to ensure perfect fit and finish. * Work on shop-fitting projects and commercial installations. * Fabricate solid surfaces as required. * Interpret and work from technical drawings and specifications. * Maintain high standards of workmanship at all times. Requirements: * Proven experience in high-quality bench joinery or furniture making (2–3 years). * NVQ qualification in joinery, or equivalent experience. * Exceptional carpentry and joinery skills with a keen eye for detail. * Solid surface fabrication experience preferred. * Strong communication skills and ability to work as part of a team. Working Hours * Monday to Friday: 8:00am – 4:30pm OR 7:00am to 4:30pm * Some Saturdays required during busy periods * Optional shifts available: 7:00am – 7:00pm, including weekends if you are wanting extra hours Benefits: * Competitive PAYE salary, negotiable based on experience. * Holiday pay entitlement. * Opportunity for optional extra shifts, including weekends. Click To Apply To send an up-to-date CV to Alison Owens at Swift Temps Ltd Bradford office on (phone number removed). This vacancy is being advertised on behalf of Swift Temps Ltd – Engineering Recruitment Division, who operate as an employment business

Business Development Manager A fantastic opportunity for a Business Development Manager with B2B technology sales experience to drive new business growth. This role focuses on consultative sales, client acquisition, pipeline management, and closing deals across IT services, telecoms, and cybersecurity solutions. If you’ve also worked in the following roles, we’d also like to hear from you: Sales Development Representative, Business Development Representative, Business Development Executive, IT Sales Executive, Technology Sales Consultant, Inside Sales Executive SALARY: £60,000 OTE (uncapped) (includes a basic salary of £28,000 - £30,000 per annum) LOCATION: Huddersfield, West Yorkshire (You must live within a commutable distance to the office) JOB TYPE: Full-Time, Permanent JOB OVERVIEW We have a fantastic new job opportunity for a Business Development Manager to join a growing technology-focused organisation delivering IT services, cyber security and telecommunications solutions to businesses across the UK. Working in a consultative B2B sales environment, the Business Development Manager will focus primarily on generating and closing new business opportunities while also managing selected internal accounts during targeted sales sprints. As a Business Development Manager you will manage the full sales cycle from prospecting and discovery conversations through to proposal and deal closure, building a strong sales pipeline and developing long-term client relationships. If you are already selling into the IT or telecoms market and want a role with more ownership, better earning potential, and a clear path forward, we would like to hear from you. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the Business Development Manager include: • Prospecting New Business: Identifying and engaging potential B2B customers aligned with the organisation’s ideal customer profile, • Discovery Conversations: Discussing IT services, telecommunications, cyber security and workplace technology challenges with prospective clients, • Pipeline Management: Building, maintaining and progressing a healthy, well-qualified sales pipeline, • Full Sales Cycle Ownership: Managing opportunities from initial contact through to proposal, negotiation and close, • Account Engagement: Working selected internal accounts during structured sales sprints to generate additional opportunities, • Proposal Preparation: Supporting the preparation and presentation of commercial proposals for technology solutions, • CRM Management: Keeping CRM systems accurate and up to date with prospect and opportunity information, • Market Knowledge Development: Continuously building commercial awareness and technical understanding within the IT and telecoms sector CANDIDATE REQUIREMENTS • B2B Technology Sales Background: Previous experience selling IT services, telecoms, managed services, or related technology solutions, • Sales Conversation Skills: Experience conducting structured discovery conversations and qualifying opportunities effectively, • Pipeline Management: Proven experience managing a sales pipeline and progressing opportunities to close, • Consultative Sales Approach: Ability to build credibility with business clients through informed and solution-led discussions, • Results Driven Mindset: Motivated by achieving revenue targets, business growth and commission-based earnings, • Commercial Awareness: Strong understanding of business customer needs within technology or communications sectors, • Self-Management: Comfortable managing your own deals and workload without heavy supervision, • Communication Skills: Excellent verbal communication, relationship building and negotiation skills BENEFITS • Uncapped earning potential with double OTE, • Ownership of deals from start to finish, • Support on complex opportunities while retaining deal ownership, • Structured onboarding and ongoing coaching, • Clear progression into senior sales or account management roles HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV’s of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14490 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Huddersfield, West Yorkshire. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online | AWD-IN-SPJ

Manufacturing Technician Location: Leeds LS13 Contract: 12 Week Temporary to be with a view to being offered as a Permanent role Hours: Monday - Friday 8:00am - 5:00pm (40 hours per Week) Pay: £13.35 p/h (£27,775 annual salary if offered permanent opportunity) Stafflex are recruiting on behalf of a well-established and growing manufacturing business based in Leeds, supplying high-quality technical products to their worldwide client base. We are looking for a hands-on Manufacturing Technician to join their production tea,. This role would suit someone with previous experience in a manufacturing or production environment who enjoys working with precision components, assemblies and testing processes. Key Responsibilities: Assembly, building and testing of small components and finished products Working to engineering drawings, instructions and quality standards Carrying out inspections and highlighting any quality issues Completing job cards and updating systems accurately Maintaining a clean and organised workspace (5S Standards) Supporting equipment checks, maintenance and calibration Contributing to continuous improvement and process efficienciesKey Requirements: Experience within a manufacturing or production environment High attention to detail and quality Comfortable working with small parts and technical assemblies Ability to follow instruction and meet deadlines Basic IT skills Positive team player with a flexible approach Experience within technical, engineering or material based manufacturing Familiarity with inspections or testing process is beneficial but not essential Familiarity or experience with soldering is beneficial but not essentialThis is a great opportunity to join a stable company offering long-term prospects and a potential for permanent employment following a successful temporary period. Please apply now to be considered for this position