Trabajos arc en Buffalo, New YorkCrear alertas

Senior Electrical Engineer - Position and Responsibilities As a Senior Electrical Engineer with Middough, you will perform engineering design within industrial power systems to include focus on AC power systems from 120V-15kV as well as PLC control systems with review/approval by a senior engineer. Responsibilities include, but are not limited to, the following: • Collect and prepare data/information and perform detailed engineering calculations (short circuit, voltage drop, cable/conduit/cable tray sizing, arc flash, lighting, heat trace, etc.)., • Design detailed drawing packages including electrical one-line diagrams, installation details, bills of material, panel schedules, lighting plans, motor schematics, conduit/cable plans, field wiring diagrams, etc., • Create specifications for various electrical equipment such as transformers, switchgear, motor control centers, etc., • Complete designs using the National Electric Code and other applicable standards., • Work with and provide direction to electrical designers., • Engineering Technology degree or Bachelor of Science in Electrical Engineering required with a focus in power systems., • 10+ years of Electrical Engineering experience., • PE license preferred., • Working knowledge of Microsoft Office products., • Strong analytical, problem-solving, and attention to detail abilities., • Strong organization and multitasking skills., • Remain in a stationary position, often standing or sitting for prolonged periods., • Frequently walk, reach with hands and arms, climb stairs, balance, stoop or kneel, bend or twist, use repeating motions that may include the wrists/hands/fingers and talk and hear., • Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus., • Should not expect adverse environmental conditions within company offices., • May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Noise levels may be moderate to high at various client sites, hearing protection may be required and/or provided. Safety protections provided by the client and/or company are required to be used and followed., • May require occasional car or air travel to other company locations or client sites. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: • A hybrid work model for work-life flexibility (based on business and client needs), • Medical, Dental, and Vision coverage, • Company paid Short/Long Term Disability, Life, AD&D, and Travel insurance, • Health Saving and Flexible Spending Accounts, • 401(k) Plan, • Paid Time Off, Company Paid Holidays, • Tuition Assistance, • Paid Certifications and Registrations (as applicable) Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Buffalo, NY. Most positions are first shift with a pay scale of $25-35/hour based on experience & skill level. If you are a Welder and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: • MIG, TIG, Stick & Structural Welding, • Perform Quality Checks (Inspection & Testing), • Maintain Safety Protocols, • Fabricating, assembling, and repairing structures, • Air Arc, • Repair Welding, • Pipe & Mechanical, • Flat/Vertical Carbon Steel Responsibilities • Basic Tools for the Trade, • Proper PPE must be worn: Have your own Hood and Gloves/Leathers Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

HVAC Data Center Technician - Buffalo, NY areaTravel 90% About US:Munters is a global leader in climate solutions for mission-critical processes. We offer innovative, efficient and sustainable solutions for customers in industries where controlling indoor humidity, temperature and energy efficiency is mission critical. Climate control systems often account for a large percentage of energy consumption in many of our customers'operations. With an optimal climate system, we can help them to more efficiently use energy or waterresources and thereby reduce their climate and environmental impact. Sustainability is an important part of Munters' business strategy and value creation.We pride ourselves on fostering a dynamic and inclusive work environment where interns are valued members of the team and are given meaningful projects to work on.Job Summary:Data Center Service Technicians travel to customer sites to start up, commission and safely troubleshoot and repair Data Center equipment. This position requires the ability to work independently, and candidates should have strong diagnostic and troubleshooting skills. Requires some ability to manage the projects while onsite for start-up commissioning and coordination of other trades and services.Essential Functions and Responsibilities: • Perform factory start-up, commissioning, warranty and billable service on Munters Data Center equipment and systems., • Maintain and protect Munters equipment and property., • Respond in a timely manner to all requests for service from customers or management., • Provide customer training on Munters equipment., • Provide technical feedback on equipment using detailed field service reports., • Understand that Field Service's major role is one of instant response to customers' needs and focus as a part of a team always makes us available to our customer needs, urgent or otherwise.Requirements:, • 5+ years of experience and extensive knowledge in the Mechanical field specifically the HVAC field., • Frequent travel required, up to 90%, across the USA by plane and car., • Extensive knowledge in electrical troubleshooting, able to diagnose electrical issues with proficiency and record data., • Knowledge of all safety procedures and requirements and has training in Arc flash, lock out tag out and other safety requirements. Understands and knows how to utilize all PPE associated with electrical safety., • Extensive refrigeration knowledge. Understands how to pressure test, evacuate, and charge systems without assistance. Understands the refrigeration system concepts and can fully troubleshoot and diagnose refrigeration problems. Proficient in brazing and soldering. Holds a universal refrigeration card., • Extensive knowledge in Controls, has experience with troubleshooting, programming, or downloading to controls systems. Understands PLC's and how to work with all types of platforms. Knows how to access information from PLC's and be able to adjust. Able to connect to a PLC with a computer to communicate and make changes., • (Optional) State Licensed Master HVAC mechanic. This requires years of experience, training and testing along with experience working under other experienced professionals to achieve., • Strong written and verbal communications skills, • Self-Motivated, with the ability to work independently., • Ability to communicate well with other site personnel as well as Sales PM, Service Manager and Technical Support personnel.Education:, • High Diploma or equivalent. Trade School desired.Physical Requirements:, • Heavy Work: Exerting up to 75 pounds of force occasionally and/or up to 20 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects., • Climbing, stooping, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, • The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data, viewing computer terminals, expansive reading, etc.Work Conditions:, • You must wear personal protective equipment such as safety glasses, safety boots, hard hats, and hearing protection where the company requires., • Ability to travel and be away from home for several days at a time., • Willingness to take "On-call" duties as required., • Willingness to occasionally work weekends and/or holidays., • Willingness to work outdoors in all types of weather conditions., • Willingness and ability to work 6 feet or more above the ground as required.Benefits:, • Competitive Salary, • Comprehensive health, dental, and vision insurance plans, • Flexible work schedule, • Generous vacation and paid time off, • 401K retirement savings plan with employer matching, • Professional development opportunities, including tuition reimbursement, and conference attendance, • Company-sponsored social events and team-building activities, • State-of-the-art equipment and tools to support your workEqual Opportunity Employer:We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. All offers are contingent on a pre-employment drug test and background check, as applicable for the position

Viridi Parente is a disruptive energy company. We deliver solutions to tomorrow’s problems, today. We develop and manufacture battery energy storage systems and technology for mobile and energy storage applications. We deliver customer-focused solutions, blending environmentally conscious products with a bottom-line mentality. Viridi is headquartered in Buffalo, NY and is excited to be currently expanding into the Richmond, CA area. The Role: Viridi is an energy storage manufacturing startup. Our lab is the test, validation, and R&D arm - where products get proven and next-generation safety technology gets built. We’re looking for an entry level Electrical Test Engineer to contribute to and eventually own battery cycling, unit performance evaluations, and test plan development across our lab programs. New engineers follow a defined onboarding program including a battery fundamentals curriculum, equipment-specific self-training from lab documents, technical references, and manuals, and hands-on guidance from senior lab staff. This role reports directly to the lab director. Engineers who wait for direction don’t thrive here - the right candidate is self-driven, technically curious, and ready to take ownership of real work. Job Responsibilities: • Plan and execute battery cycling and unit performance evaluations using Maccor, Chroma, and NHR cyclers and thermal chambers, • Write test plans and procedures for electrical performance and safety testing programs, • Set up and operate instrumentation, including data acquisition systems, thermocouples, PID controllers, power supplies, and other lab equipment, • Analyze and interpret test data and produce clear technical reports; use of scripting and automation tools to process and present data efficiently is expected, • Support UL 9540A, UL 1973, and UN 38.3 testing programs from setup through documentation, • Takes ownership of assigned projects and self-directed backlog work equally, providing regular progress updates on completions, active work, and items awaiting input, • Maintain a lab notebook with sufficient detail that other lab personnel can reproduce your setup and continue your work - accurate, dated records are the foundation of any IP claim the lab generates Qualifications: • Bachelor’s degree in Electrical Engineering, Physics, or a closely related field, • Hands-on lab or hardware experience — internships, research, or coursework requiring real build and measurement work, • Basic electrical troubleshooting and prototyping — wiring test fixtures, reading wiring diagrams, debugging instrumentation and test channels, • Ability to write test plans, interpret electrical test data, and produce clear technical documentation, • Battery, energy storage, or power electronics experience a plus, • Experience with Python, MATLAB, or LabVIEW for data analysis preferred; VBA/Excel macros a plus for smaller dataset work, • Exposure to UL or UN safety testing standards a plus, • Ability to withstand prolonged periods of standing and walking during active test campaigns, • Must be able to lift and carry up to 50 pounds, • Must be able to work in environments requiring PPE, including arc flash protection, chemical splash protection, and respirators Location: • Buffalo, NY (On-Site) Working Conditions: • Full-time on-site in an active battery test laboratory; occasional remote work for research or documentation, • Occasional travel to third-party test facilities may be required; frequency is minimal, typically once per year or less, • Works regularly in environments with high-voltage AC and DC systems; PPE and safety protocol compliance required, • Works in environments where exposure to battery electrolytes, solvents, and off-gas byproducts is possible; appropriate PPE is provided and required

CI Azumano Travelis Seneca Holdings' full-service travel management company for businesses, governments, and personal travelers. We offer 24/7 support for travelers while also supporting customers with travel expense management, policy implementation, technology solutions, business intelligence tools, and vendor negotiations. Our team of talented individuals is what makes us successful. To support our team, we provide a balanced mix of benefits and programs.Your total rewards package includes competitive pay, benefits, and perks, flexible work-life balance, professional development opportunities, and performance and recognition programs. We offer a comprehensive benefits package that includes medical, dental, vision, life, and disability, voluntary benefit programs (critical illness, hospital, and accident), health savings and flexible spending accounts, and retirement 401K plan. One of our fundamental principles is to offer competitive health and welfare benefits to our team members, providing coverage and care for you and your family. Full-time employees working at least 30 hours a week on a regular basis are eligible to participate in our benefits and paid leave programs. We pride ourselves on our collaborative work environment and culture, which embraces our mission of providing financial and non-financial benefits back to the members of the Seneca Nation. CI Azumano is seeking an Accounting Clerkto support our growing team. This position is remote. The Accounting Clerk performs accounting and clerical functions to support accounting operations. Responsibilities include, but are not limited to: • Processing and reconciling ARC data, which acts as the central system for airline ticket reporting, • Provide accounting and clerical functions to support the finance department, • Perform all necessary account, bank and other reconciliations, • Provide assistance and support to company personnel/customers/vendors, • Manage accounts receivable, • Prepare and submit customer invoices and statements, • Knowledge of basic accounting procedures, • Competency in MS office, • Proficient in Excel, • Experience with accounting software and financial reporting, • Accuracy and attention to detail, • Well organized, critical thinking, able to work independently, • Good communication skills, both verbal and written Equal Opportunity Statement: Seneca Holdings provides equal employment opportunities to all employees and applicants without regard to race, color, religion, sex/gender, sexual orientation, national origin, age, disability, marital status, genetic information and/or predisposing genetic characteristics, victim of domestic violence status, veteran status, or other protected class status. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation and training. The Company also prohibits retaliation against any employee who exercises his or her rights under applicable anti-discrimination laws. Notwithstanding the foregoing, the Company does give hiring preference to Seneca or Native individuals. Veterans with expertise in these areas are highly encouraged to apply.

Tradesmen International - - Responsibilities: MIG, TIG, Stick & Structural Welding; Perform Quality Checks (Inspection & Testing); Maintain Safety Protocols; Fabricating, assembling, and repairing structures; Air Arc.

The role involves applying corporate income tax knowledge, supervising teams, and ensuring high-quality work in tax compliance engagements. A global consulting firm is seeking a Manager for their Amended Return Center in the US.

Job DescriptionTitle: Welder / Fabricator Reports To: Maintenance Supervisor Direct Reports: Not Applicable Position Summary The welder/fabricator is responsible for repairs and maintenance to containers and company owned property to meet customer and regulatory specifications. Essential Responsibilities • Performs repairs and maintenance on containers and trucks, • Weld steel and aluminum components using MIG and ARC welding Equipment., • Fabricates steel components using a brake and shear., • Cuts steel using a plasma cutter or torch., • Fabricates steel components for hoppers, containers and compactors., • Installs lids and wheels on containers., • Follows all safety policies and procedures., • Completes required paperwork. Education/Experience • Certified welder preferred, • 3-5 years welding experience, • Ability to operate a forklift, training can be provided, • Must be at least 18 years of age Benefits at Modern: • Medical, Dental and Vision Coverage, • Retirement Savings with Employer Match, • Health Savings Accounts, • Voluntary Insurance Products, • Employee Assistance Program, • Paid Time Off, • Paid Holidays, • Direct Deposit/Electronic Paystubs, • Discount Memberships, • Company-Sponsored Events Modern Corporation is an Equal Opportunity Employer and is committed to providing all applicants and employees the right to equal employment opportunities with regards to all aspects of the employment relationship. The Company will not engage in discriminatory practices against any applicant for employment or employee of the Company because of race, color, religion, marital status, familial status, military or veteran status, disability (including pregnancy-related conditions), creed, sex, sexual orientation, gender, gender identity or expression, transgender status, age, national origin, ancestry, domestic violence victim status, genetic predisposition or carrier status, genetic information, known relationship or association with any member of a protected class, or any other legally protected class or status.

Job Description API Heat Transfer is looking for people who enjoy being part of transformation. We have a new mission, new leaders, and are accelerating our path to Lean Cultural Change. Our Operations Team is on the way to becoming a Lean Management powerhouse! If you like to fix things, and want to be part of a new API, we'd love to talk to you about our 2nd shift Fab S/U Welder position! At API we take our culture transformation seriously! To help find the best fit for our positions and organization, we ask that you complete our 10-minute Culture Index Survey. Simply follow the link after submitting your application to help us use our interview time to dive deeper into your job behaviors and work history. What We Offer You: • Starting wage $30.45/hour, incremental increases move to $32.67/hour after one year, plus shift differential of $1.50, • Be part of leading-edge technology for the heat transfer industry, • Career development and advancement, • Multi-site, global operations to learn!, • Ability to impact customers across multiple industries, • Only 20 minutes from the beautiful Buffalo waterfront and 45 minutes from Niagara Falls, • In house market style cafeteria with plenty of healthy selections • Check out material allocated for fabricating assignment with specifications given on Bill of Material or drawings., • Performs all necessary set-up operations preparatory to layout, cutting or beveling and also for welding when related to his job assignment., • Performs all layout operations relevant to his fabricating assignment, using such tools as may be necessary or required., • Performs all necessary burning, cutting and beveling operations necessary to establish the correctness of length, bevel, and size of hole as relating to his job assignment. Does own chipping and removal of slag from burning or beveling operations., • Uses proper tools, fixtures or other devices as may be necessary to set up and align such fittings as are necessary to set up and align from drawings within required specifications and tolerances., • Must be able to set up and operate coupling welder and tubesheet welder in the DFT line., • May be asked to assist lower grades., • Has necessary layout tools., • Exercises reasonable care and protection for all machines surfaces when welding or handling., • Checks out correctness of overall set-up (with inspector, if necessary)., • Notifies foreman of any questionable material that is allocated to a job he is assigned to, which appears to be defective and should not be used. Must remove work from rolls or positioner when completed., • Must be able to qualify for necessary ASME Section VIII & IX Code Welding requirements, using Metallic Arc, TIG (Heli-Arc) and Mig. What You Will Bring: • Must be able to pass a written competency skills test at time of interview., • Candidate will be required to pass a series of weld tests in order to be hired., • Must be able to qualify for necessary ASME Section VIII & IX Code Welding requirements, using Metallic Arc, Heli-Arc (TIG) and MIG., • Must be code qualified on shop welding procedures for carbon steel, stainless steel to carbon steel, stainless steel to stainless steel to include PED directive or other mandated customer welder qualification requirements for the listed metals., • Must be able to demonstrate consistent quality in both weld and fit up., • Productivity levels must be maintained to meet or exceed reasonable time estimates on a consistent basis., • Assessments to be evaluated by both department supervisor and Quality Control personnel on a periodic basis., • Cube Cooling for Frac Truck, • Turnkey Solutions for Nonalcoholic Beer & Wine

Looking for a nursing role with true work-life balance? The Arc Erie County New York is hiring a School Registered Nurse (RN) to support children and adults with disabilities in our school age program located in Cheektowaga NY. In this role, nurses provide hands-on clinical oversight and coordinate

Certified - Teaching - Speech-Language Pathologist.Preschool Speech Language Pathologist (SLP).Clinical Services / School-Based Programs.Help Students Find Their Voice- While Protecting Your Own Work-Life Balance!.At The Arc Erie County NY, we believe communication is a fundamental human right.As a

Job Description The JCC Aerobics team is responsible for providing safe, effective and high quality aquatic training for members and guests of all ages, backgrounds and experience levels. These team members are expected to meet the JCC standards for training, safety and professionalism at all times. The JCC has multiple aquatics facility's, Holland Family Building in Downtown Buffalo and Benderson Family Building in Getzville (by UB North), Water Aerobics team members may be required to work at both facility's. Requirements: 1 year of aquatic and/or aerobic experience (Preferred) Daily Responsibilities include: • Maintaining a safe, inclusive and positive training environment., • Administering appropriate training procedures via ARC 'Learn to Swim' Training., • Teamwork and communication with Head Trainer and W.S.I. team, • Cleaning, sanitation and organization of aquatic facility's and training equipment., • Testing and documentation submission for ARC 'Learn to Swim' training courses.

Job Description Job Summary UBMD Orthopaedics & Sports Medicine is looking for a Physician Assistant to join our Orthocare Clinic. Applicants must be a graduate of an accredited PA program. Current or Pending NYS license required. This is an excellent opportunity for seasoned PA's with urgent care experience, as well as PA's new to Orthopaedics. All levels of experience are encouraged to apply, including current students and new grads. Job Description The Physician Assistant is responsible for promoting and maintaining health by providing quality medical services under the supervision of a Physician through the identification of short-term and long-range patient care issues and recommending options and course of action while implementing physician directives. This is a full time, exempt position in our Urgent Care Clinic (Orthocare). Responsibilities include patient screenings, and patient assessments within an urgent care setting. Candidates must be comfortable seeing patients of all ages performing typical urgent care procedures; suturing, wound repair, ortho splinting, casting, etc. Prior urgent care or emergency medicine experience is a plus, but not required. The position requires a professional person with excellent clinical and communication skills who has the ability to work autonomously. Duties • Elicits a detailed and accurate patient health history and performs a physical examination; records these along with progress notes in the patient’s charts., • Determines abnormal conditions by ordering diagnostic tests such as X-rays, EKG’s and basic laboratory studies and interprets test results., • Formulates an initial diagnosis, therapeutic plan and treatment., • Provides fracture care including reductions, operative vs. non-operative care, splint, suture, and staple applications/removals., • Performs such routine therapeutic procedures as intramuscular injections, immunizations, wound care, joint aspirations, joint injections, and incision and drainage of superficial infections., • Answers all patients phone calls regarding the clinic. Triages as appropriate., • Completes all forms and required paper., • Facilitate referrals when needed., • Performs as first or second surgical assist during operation., • Rounds at hospitals as required by Physician., • Complies with Federal, State, and local legal and professional requirements by studying existing and new legislation, anticipating future legislation, and enforcing adherence to requirements., • Contributes to team effort by accomplishing related results as needed., • Maintain professional and technical knowledge by obtaining required CME’s, reviewing professional publications, and participating in professional societies., • Respects and protects the confidentiality of all patient and Company information through the adherence of all HIPAA guidelines and regulations., • Assumes other duties as requested by Physician. Qualifications • Education Requirements, • Master’s degree, along with successful completion of a NYS or ARC-PA accredited Physician Assistant Program. Must Possess NYS licensure upon hire., • Experience Requirements, • Background in orthopaedics and/or professional experience in outpatient orthopaedic environment preferred., • Skills and Competencies Requirements, • Excellent communication and customer service skills required. Must be able to multi-task and desire to work in fast-paced, team-oriented environment.

The Arc Erie County NY is looking for a Float Registered Nurse (RN) to join their clinical services team.The role involves enhancing the quality of life for individuals with developmental and intellectual disabilities through direct nursing care and support across various locations.Candidates should

Job DescriptionDescription: Ferguson Electric’s Electrical Engineer II is a mid-level position for engineers focusing on becoming self-sufficient on design and engineering tasks. This position will contribute to the electrical system design, engineering, commissioning and construction efforts for commercial and industrial projects, including healthcare, education, research, commercial facilities, and utilities. This role involves supporting project design teams, developing innovative electrical solutions, and ensuring compliance with applicable codes and standards. The Electrical Engineer II role will provide guidance to junior staff as needed, assist in managing project deliverables, and support the company’s commitment to quality, safety, and client satisfaction while upholding Ferguson Electric’s core values. RESPONSIBILITIES • Electrical Systems Design:, • Design of electrical systems, including power distribution, lighting, fire alarm, and communication systems, for commercial and industrial projects., • Support the development of project design goals, specifications, and strategies to meet client requirements and project objectives., • Participate in quality control reviews of engineering documents to learn about accuracy and compliance with project requirements., • Help ensure designs comply with applicable codes (e.g., NFPA, IEEE) and industry standards., • Electrical Systems Analysis and Field Support:, • Help specify electrical equipment, components, and materials, ensuring compatibility with project needs and budgets under supervision., • Perform engineering studies, such as load analysis, short-circuit, and coordination and arc flash, using tools like SKM or Easypower with minimal supervision., • Review of submittals, shop drawings, and other construction documents to ensure they are meeting the project requirements., • Develop relay, transformer, breaker and battery testing plans and reports with minimal experience., • Develop relay programs with minimal guidance., • Support service technicians with troubleshooting customer electrical system problems under the guidance of higher-level engineers., • Project Leadership:, • Support the coordination of electrical engineering aspects of projects, helping adhere to budgets, schedules, and quality standards., • Participate in project team and client meetings to align on project scope, progress, and deliverables., • Assist in the preparation of construction documents, including drawings and specifications., • Site Engagement:, • Participate in job site visits to observe existing conditions, monitor construction progress, and learn about compliance with design specifications., • Attend construction meetings and provide basic technical support to field teams and subcontractors as needed., • Perform physical walk-throughs of sites under supervision to assess conditions and resolve issues., • Process Improvement:, • Contribute to strategies to improve design quality, coordination, and efficiency in production efforts., • Support the incorporation of renewable and sustainable design practices where applicable to enhance project outcomes. Requirements: ABOUT YOUR QUALIFICATIONS • Education and Experience:, • Bachelor’s degree in Electrical Engineering or Architectural Engineering from an ABET-accredited program required and preferred with electrical systems focus., • 4-6 years of experience in electrical engineering, with a focus on commercial or industrial projects., • Engineer-in-Training (EIT) certification is required or additional 5 years of experience directly related to the job responsibilities., • Technical Skills:, • Strong proficiency with Microsoft Office Suite (Word, Excel, Outlook) for documentation and reporting., • Proficiency in drawing software (e.g. Revit and AutoCAD) and electrical analysis software (e.g., SKM) is preferred., • Good understanding of designing power distribution, lighting, and communication systems per NEC, IEEE and other relevant codes is preferred., • Ability to read and understand construction drawings and specifications., • Basic understanding and knowledge of electrical system installation methods and standards., • Exposure to renewable energy systems or sustainable design practices is a plus., • Soft Skills:, • Strong problem-solving skills and ability to work on multiple tasks., • Good leadership and mentorship skills to contribute to team efforts., • Good communication and interpersonal skills to collaborate with clients, contractors, and internal teams., • Organizational and time management skills to handle tasks and meet deadlines., • Ability to adapt to an adjusted work schedule, including occasional overtime or evening/weekend hours, to meet project demands., • Willingness to accept constructive feedback and make changes as necessary to improve job performance., • Willingness to learn and develop skills in various engineering tasks, software, and equipment., • Other Requirements:, • Ability to conduct physical site walk-throughs and work in various environmental conditions., • Participate in in-house and manufacturer training to enhance skills.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Are you a skilled electrical engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Northeast Electrical Engineering team and take a leading role in the design and execution of critical facilities and infrastructure projects throughout the Northeast. In this role, you’ll lead projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in electrical engineering design and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. With the opportunity to work on transformative projects, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our team, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Bachelor’s of Science or Technology degree in electrical engineering., • Licensed Professional Engineer (PE) in New York State., • Minimum 8 years of experience in electrical engineering design, with a strong focus on Public and Private facilities infrastructure projects., • Proficiency in AutoCAD and Revit., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash analysis., • Proficiency with the National Electric Code., • Experience with the layout and design of medium and low voltage distribution systems., • Experience with the layout and design of lighting systems and controls. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Part-time Community Habilitation Specialist - Catskill.We are seeking caring individuals for rewarding part-time, one-to-one positions, teaching daily living and community integration skills to children and adults with intellectual and developmental disabilities.The Community Habilitation Specialist

Why work at The Arc Lexington?. The Arc Lexington always strives to be the best possible employer. Employees find fulfilling, meaningful careers at The Arc Lexington and enjoy being part of our family.

The Public Transportation Driver reports to The Arc Mid-Hudson’s Transportation Supervisor under the guidelines of the Greene County Transit contract, must exhibit a high degree of competence and responsibility for the safety of passengers being transported. Responsible for bringing ill and/or inj

The Arc of Delaware County, a nationally recognized organization serving Delaware County for over 50 years, is committed to providing an environment in which everyone is treated with care and respect. The Arc of Delaware County offers a competitive salary with an excellent benefits package. Comply w

The Part-Time Public Transportation Driver reports to The Arc Mid-Hudson’s Transportation Supervisor under the guidelines of the Greene County Transit contract, must exhibit a high degree of competence and responsibility for the safety of passengers being transported. Responsible for bringing ill

Transitions is a part of The Arc Lexington with campuses in Mayfield (Fulton County), Cobleskill and Albany. The Arc Lexington employees have repeatedly voted us for several awards:. The Arc Lexington provides equal employment opportunities (EEO) to all employees and applicants for employment withou

Valid New York State Class B or C driver's license with/without Passenger Endorsement, or Class D and a driving record acceptable to The Arc Mid-Hudson. A valid New York State Class B or C driver's license with/without Passenger Endorsement, or Class D and a driving record acceptable to The Arc of U

Showroom and Warehouse Associate.If you enjoy variety in your workday, take pride in how spaces come together, and don’t mind being on the move, this role offers a great blend of.Travel regularly between showroom locations within the market to support setup and merchandising needs.Assist with unlo

The Arc Erie County NY is seeking a Community Support Specialist in Buffalo, NY to support individuals with developmental disabilities in various services.

ALDI is looking for enthusiastic part-time cashiers and stockers.As a cashier, you'll provide friendly, efficient checkout service, while as a stocker, you'll help keep shelves stocked and organized to ensure a great shopping experience.Each role plays an important part in maintaining smooth store o

The Arc Erie County NY |School Registered Nurse (RN) | Cheektowaga NY Looking for a nursing role with true work-life balance? The Arc Erie County New York is hiring a School Registered Nurse (RN) to support children and adults with disabilities in our school age program located in Cheektowaga NY. If

Job Description Job Description We are seeking a Mechanic Assembler to assemble Rotary Filling Machines.Responsibilities: Work with a team to assemble entire machine Rotate through tasks for specific production processes Conduct quality inspections on products and parts Prepare finished products for

Job Description Job Description About Company: If you're seeking a company that values inclusivity, development, supportive team dynamics, and stable global growth areas (e.We demonstrate values that align with positive employee feedback and a commitment to maintaining a balanced, respectful workpla

Job Description Job Description Job Title Electrical / Mechanical Assembler Location Buffalo, NY Department Manufacturing / Production / Assembly Employment Type Full-Time | Non-Exempt Company Overview GTI Energy designs and manufactures complex modular systems supporting modular data center infrast

Ace Hardware - - Responsibilities: Greet and assist customers; Help customers find everything needed for their project in one trip; Maintain a fast-paced, high-energy environment; Stand on feet for 6 to 8 hours; Lift up to 50 pounds.

Home Depot - - Responsibilities: Process Checkout and Return transactions; Monitor and maintain the Self-Checkout area; Seek product/project knowledge to provide information and identify selling opportunities; Provide first level escalation for customer issues; Assist in the supervision, coaching a

FedEx - - Responsibilities: Operate equipment for movement of packages/documents/heavyweight, dangerous goods and ULDs; Assist in buildup/breakdown of pallets containing heavyweight freight; Serve as liaison between company and ULD repair vendor; Perform other duties as assigned; Communicate effect

Ace Hardware - - Responsibilities: Welcome and assist customers; Help customers find everything they need for their project in one trip; Work in a fast-paced and high-energy environment; Be on your feet for 6 to 8 hours per shift; Lift up to 50 pounds.

ABM Industries - - Responsibilities: Greet customers in a friendly, professional manner; Issue and/or collect visitor parking tickets; Reconcile receipts, cash, and charges; accurately account for all funds within cashier drawer; Perform revenue drops following location procedures; Maintain a clean

Price Rite - - Responsibilities: Maintain a clean, neat, organized and safe work environment; Check products received against an invoice; Understand operation of cash register and follow all cash handling procedures; Greet all customers and provide them with prompt, courteous service and assistance

Walmart - 5033 Transit Rd - [Retail Associate / Team Member / up to $26-hr] - As a Cashier at Walmart, you'll: Smile, greet, and thank customers with a positive attitude; Stand for long periods of time while checking out customers quickly and accurately; Keep your area clean and presentable; Answer

Ace Hardware - - Responsibilities: Greet customers entering and throughout the store.Process cash register transactions and balance the drawer.Assist customers with product location and store layout.Keep the front end neat and clean, and maintain appearance of checkout areas.Participate in cashier

Alro Steel - - Responsibilities: Fill and prepare material orders for shipment; Operate overhead cranes, forklifts, metal saws, shears, and lasers; Contribute to our customer service mission in a safe and efficient manner; Extensive upfront training and ongoing mentoring; Opportunity for growth and