Associate project manager jobs in Rochester, New YorkCreate job alerts

Job Description Pay Rate: $29-32/hr Duration: 3 months, possible to extend/convert Location: Rochester, NY Sub Spots: 2 Training: Wed-Sat 7:30am-6:00pm, 3 weeks Shift: FHN Sun-Wed 6:30pm-4:45am Start Date: 12/29 Must Haves: • High School or equivalent diploma, • Current valid Basic Life Support (BLS) certification by an approved emergency cardiac care (ECC) provider, • One of the following active certifications:, • Emergency Medical Technician (EMT), • National Registry of Emergency Medical Technicians (NREMT), • Paramedic Certification from the Department of Health, • Athletic Trainer Certification (ATC), by either the Board of Certification or equivalent State Certification Day-to-Day: We are seeking an experienced and dynamic Medical Representative to join our team. In this position, you will work closely with the site manager, specialist, and occasionally the Injury Prevention Specialist. This includes attending weekly associate safety committee meetings, greeting all new hires for the site or through daily one-on-one interaction. Additionally, the Medical Representative will participate in weekly case management review meetings as necessary. You will be independently assessing and administering first aid as well as offering guidance to employees on both occupational and non-occupational injuries or illnesses. You should be passionate about learning and advocating health and wellness principles. You will refer care to outside medical providers as needed, and learn about OSHA regulations, risk, and analysis. Responsibilities include but are not limited to: • Provide first aid support and make referrals to outside medical providers as necessary., • Minimize the employee risk of injury through awareness, education, and proactive engagement., • Maintain all records of care provided to employees., • Coordinate and maintain the workers’ compensation and return to work programs for employees with work-related injuries. Benefit packages for this role will start on the 31st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law. Company DescriptionInsight Global isn’t just a staffing company. We’re a company that cares for others. It might sound lofty, but it's the idea that gets us up every day, determined to make it true. Insight Global is a company that people can anchor to in moments of triumph, struggle, and every time in between. Whoever you are and wherever you come from, you matter to us, and we have your back. Whether it’s finding the right candidate for a job or seamlessly managing a project end to end, our conviction and commitment to our consultants and clients runs deep. With 60+ field offices across the US, UK, and Canada, putting to work over 50,000 Consultants annually, we believe together, anything is possible. Learn more at Global isn’t just a staffing company. We’re a company that cares for others. It might \nsound lofty, but it's the idea that gets us up every day, determined to make it true. Insight \nGlobal is a company that people can anchor to in moments of triumph, struggle, and every \ntime in between. Whoever you are and wherever you come from, you matter to us, and we \nhave your back. Whether it’s finding the right candidate for a job or seamlessly managing a \nproject end to end, our conviction and commitment to our consultants and clients runs deep. \nWith 60+ field offices across the US, UK, and Canada, putting to work over 50,000 \nConsultants annually, we believe together, anything is possible. Learn more \nat

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is interviewing for a Mechanical Design Engineer in our Rochester, NY office. We are a growing full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Performs assignments designed to develop skills of the Project Engineer/Design Engineer., • Utilizes engineering principles and standard designs to develop project designs and layouts., • Works with Senior Engineer, Project Engineer, Group Manager, Partner, Associate, and or Principal., • Independently performs assignments after instructions as to the general results expected., • Receives guidance on unusual problems and supervisory approval on developed plans., • Assists in the preparation of contract documents., • Plans, schedules, and conducts all phases of the work in a partial or a total project of moderate scope., • Performs conventional engineering work including standard designs., • Makes engineering calculations., • Develops elementary designs expanding on detailed schematic sketches., • Coordinates production and coordination with Senior Engineer/Designer or Project Engineer/Designer., • Associate degree, Bachelor of Science degree, or equivalent combination of education and experience., • The compensation range for this position is $62,400 to $72,500 per year. M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, or any other characteristic protected by federal, state, or local laws. Powered by JazzHR sYDiJ4F3xJ

Job Description SUMMARY: The Associate Store Team Leader is responsible for the overall day-to-day operations of the store assuring that safety, sales, production, programs and services, and other standards are maintained. This position will also partner with other members of the Retail Administration team, People Resources and Workforce Development to ensure that all activities performed are in a manner consistent with the mission, vision, and values of Goodwill. Subscribes to and promotes Goodwill's mission and values. Functions as an active Retail Division team member to achieve organization and department goals. Competencies needed to be successful in this job include: Customer Focus, Developing Others, Interpersonal Skills, Self Development, Communication & Collaboration, Process/Project Management, Sense of Urgency, Business Acumen and Functional/Technical Skills. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Under the direction of the Director of Donated Goods Retail, manages the fiscal and operational functions of assigned store. Partners with People Resources, Finance and Logistics to accomplish people, loss prevention, and safety responsibilities. The Associate Store Team Leader is specifically responsible for:, • Achieves budgeted revenue goal;, • Achieves revenue to expense ratio target;, • Delivers budgeted surplus target;, • Adheres to percent labor to sales metric; and, • Ensures compliance with Organization Safety standards., • Ensures that all store team members are trained and up-to-date in required Goodwill operating policies, required in-store safety programs and on-the-job training experiences;, • Demonstrates the highest level of customer service in all activities;, • Reviews customer concerns and resolves them appropriately within established guidelines, • Submits required information on production, distribution of labor, safety, and any team member related paperwork as required and within stated timeframes;, • Liaise with People Resources on employee relations issues for Store to ensure fair employee practices that are aligned with Goodwill’s mission, vision and values., • Assures that loss prevention programs are adhered to, implemented in-store and are within Goodwill established standards., • Manages a broad range of store activities:, • Ensures that established standards, plans, plan-o-grams, and advertising/signage are implemented and maintained;, • Ensures polite and courteous acceptance of donations., • Ensures complete processing of donations, both hard goods and clothing., • Monitors the stock level of store merchandise and works with Assistant Team Leaders to adjusts as necessary:, • Reviews applications, interviews, selects and completes new hire process for team members., • Prepares employee schedules and ensures adequate staffing is maintained for the store and stays within the boundaries of payroll budget through the store metrics; and, • Conducts team members performance reviews with input from other members of retail management, and director of DGR for retail management., • Trains and develops retail management teams for growth and more responsibility., • Ensures safe work practices are followed at all times:, • Ensures the facility is neat, clean, and organized to prevent injury or accident., • Ensures employees, volunteers, community service personnel and others use safe work methods at all times., • Provides safety training to all new employees and administers on-going training to all store personnel., • Adheres to organizational values, ensuring that they are practiced daily in all store operations and interactions., • Ensures effective communication with store team, program participants, community and customers., • Acts as a positive role model for employees, trainees, and customers in all aspects of professional performance;, • Cooperates with Workforce Development and People Resources departments to maximize the benefits of those services to retail employees., • Ensures that store equipment is kept in proper working order. Promptly notify Maintenance Supervisor of defects, or IT Manager of problems with computer systems and e-mail., • Maintains interior and exterior of store in a neat, clean, organized manner (including but not limited to vacuuming, dusting, cleaning bathrooms, mopping floor), • Contributes to the overall effectiveness of Goodwill of the Finger Lakes and the retail store by completing all other tasks as assigned. SUPERVISORY RESPONSIBILITIES: Manages members of the store management team, who supervise processes and procedures and team members in assigned operations. Is responsible for the overall direction, coordination and evaluation of this store. Also manages non‑supervisory employees. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring and training employees; planning, assigning and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to demonstrate proficiency in meeting competencies required for position; able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed below are representative of the knowledge, skill and/or ability required. EDUCATION and/or EXPERIENCE: Bachelor’s Degree or equivalent preferred. A minimum of four years' progressive business experience required, retail experience required. Minimum of two years supervisory experience required. Or equivalent combination of education and experience. COMPUTER SKILLS: Must be proficient in Word, Excel and Outlook. LANGUAGE SKILLS: Able to read, analyze and interpret general business periodicals, professional journals, technical procedures or governmental regulations. Writes business correspondence. Presents information and responds to questions from groups of managers, clients, customers and the general public. Employee must be an effective communicator. MATHEMATICAL SKILLS: Able to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages and sales volume. Able to apply financial and budgeting concepts. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee occasionally works in outside weather conditions while receiving donations or traveling between sites. The employee is occasionally exposed to dusts, molds and dirt while handling donated materials and to extreme cold in the backroom during the winter. The noise level in the work environment is usually moderate. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Physical Demands- Associate Store Team Leader Frequency Never Almost Never Occasionally Frequently Often Sitting X Standing X Walking X Bending over X Crawling X Reaching Overhead X Crouching X Kneeling X Balancing X Lifting and Carrying 10 lbs. or less X 11 to 25 lbs. X 26 to 50 lbs. X 51 to 75 lbs. X 76 to 100 lbs. X over 100 lbs. X Push/ Pull Max Force 0 to 20 lbs. X 21 to 39 lbs. X 40 to 59 lbs. X 60 to 100 lbs. X

Job DescriptionM/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is interviewing for a Plumbing/Fire Protection Design Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Performs assignments designed to develop skills of Project Engineer/Designer., • Utilizes engineering principles and standard designs to develop project designs and layouts., • Works with Senior Engineer/Designer, Project Engineer/Designer, Group Manager, Associates and or Principal., • Performs assignments independently after instructions as to the general results expected., • Receives guidance on unusual problems and supervisory approval on developed plans., • In addition to duties of CAD Operator., • Assists in the preparation of contract documents., • Plans, schedules, and conducts all phases of the work in a part of or a total project of moderate scope., • Performs conventional engineering work including standard designs., • Makes engineering calculations., • Develops elementary designs expanding on detailed schematic sketches., • Coordinates production and coordination with Senior Engineer/Designer or Project Engineer/Designer., • May supervise or coordinates the work of CAD Operators., • Associate degree, bachelor's degree, or equivalent combination of experience and education., • CAD (Revit) experience preferred. Compensation Range Powered by JazzHR s8Yc4uhWj7

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is interviewing for a Senior Mechanical Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption, and modifications of standard techniques and procedures., • Works with the Principal, Associate, or Project Manager to finalize project scope and schedule of deliverables and understands priorities identified., • Applies advanced practices and techniques, adjusts and correlates data, recognizes discrepancies, and follows projects through program, schematic, design development, construction document, bidding, and construction phases., • Supervises, coordinates, and reviews work., • Schedules and assigns work to meet completion dates., • Develop reports, studies, and system analysis., • Works in an efficient and effective manner and makes good decisions., • Evaluates application of substitute equipment., • Reviews final adjustment of equipment and systems after installation., • Writes or contacts clients directly except in controversial matters., • Ability to represent the firm at meetings and cover all trades, which may require further follow through., • Is assisted on projects by other engineers and/or designers., • Estimates workforce needs, schedules, and assigns work to meet completion date and updates the project manager as to status and resources available., • Mentors and trains younger engineers and designers., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science or equivalent. Powered by JazzHR tlCG3S3mSI

Job DescriptionDescription: Summary: Under the guidance of the Family Leadership Coordinator, the Health Advocate will ensure that all health, safety, medical, and nutritional needs of all children serviced by Children & Family Stability Services are met, as set forth by licensing and program standards. The health advocate will also ensure that all health and safety regulations and standards are met for all children at the center. Essential Functions: Reasonable Accommodations Statement To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions. • Reports to Family Leadership Coordinator., • Establishes and maintains good working relationships with agency staff, staff from partnering agencies, parents, and children., • Responsible for the input of all data entry and ensuring it is current at all times., • Coordinate all initial vision, hearing, and nutrition screenings in the program., • Refers to all failed screenings for recommendations or referrals for appropriate medical follow-up., • Complete Health Intake with all families applying for services., • Ensure all Physical and Dental examinations are current., • Assist teaching teams in contacting families of ill children., • Provides basic first aid to children in need., • Assist in responding to requests (phone, email and written) from staff related to child health needs/concerns., • Assist in the development and distribution of written and web-based materials for children, adults, and employees within the areas of health and nutrition., • Evaluate the immunization status for each enrolled and applying child and ensure proper data entry., • Monitor the completion of required immunizations for each enrolled child., • Centralized the record-keeping system of required health-related forms such as Physical exams, Dental exams, etc., • Assist Office Manager in implementing and maintaining Staff CPR/ First Aid/ MAT Training., • Assist the Director with developing and maintaining written Health policies and procedures as required., • Ensure that health services’ equipment and materials are tracked and accounted., • Orders, monitors, and replenishes all first aid kits every month., • Supports families in using community resources by referring families in need to medical and dental insurance providers and service providers, and follows up on the effectiveness of those referrals., • Notify kitchen staff of food allergies and special nutritional needs of children and develop and maintain a current allergy list for the center., • Assists nutritionists in meeting the nutritional needs of children., • Train teaching staff in any medical, nutritional, and special health needs of children., • Gives and records medication to children., • Assist parents with making medical appointments for their children and provide transportation as needed., • Following sick children by giving medication, taking temperature, administering first aid, calling parents, making medical appointments, and calling home to check how the child is doing., • Follows all agencies, childcare, and program policies, procedures, and standards., • Communicate to the program director suspicion of child abuse, neglect, and/or maltreatment., • Prepare reports as requested., • Attends scheduled meetings, parent meetings, training, and center events as assigned., • Provide and support on-site telemedicine services., • Complete all the work promptly., • Continue to develop professionally., • Keeps knowledge of children and families confidential., • Assist in coordinating special projects. The employee exercises initiative and independence in establishing his/her schedule for meetings with staff, participants, and community agencies. Follows established procedures for conducting the tasks required of the position. The individuals must be creative and resourceful to be able to assess situations to determine if a crisis is involved and how to best proceed within the framework of the agencies and program’s policies and procedures. Consult with the supervisor if in doubt before proceeding. Position Qualifications: Competency Statement(s) • Analytical Skills - Ability to use thinking and reasoning to solve a problem., • Accuracy - Ability to perform work accurately and thoroughly., • Customer Oriented - Ability to take care of the customers’ needs while following company procedures., • Detail Oriented - Ability to pay attention to the minute details of a project or task., • Developing Others-Ability to teach or foster the development of others, giving constructive feedback and reassurance after problems., • Diversity Oriented - Ability to collaborate effectively with people regardless of their age, gender, race, ethnicity, religion, or job type., • Ethical - Ability to demonstrate professionalism conforming to a set of values and accepted standards., • Interpersonal-Ability/desire to understand others’ attitudes/interests/needs/nonverbal behavior, listening skills, and understanding strengths/limitations of others., • Leadership- Ability to motivate, influence, and support others to accomplish team and organizational goals., • Training & Presentation Skills., • Relationship Building-Ability to build/maintain friendly relationships/networks with people who might be useful in achieving work-related goals., • Reliability - The trait of being dependable and trustworthy., • Communication, Oral - Ability to communicate effectively with others., • Associate Degree in Human Services or related field, CDA, FDC, or a minimum of a High School Diploma with at least 2 years of experience working with children and families., • Valid First Aid and CPR Training MAT., • Ability to receive positive clearance for NYS State Central Registry., • Valid NYS driver’s license and access to own transportation., • Experience working in a childcare or educational setting., • Bilingual in English and Spanish is required., • Demonstrates the ability to work cooperatively., • Demonstrates the ability to work with families., • Good organizational and computer skills. The position does require occasional standing, squatting, and lifting of up to approximately 40 lbs. And frequent sitting.

Job Description * • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption and modifications of standard techniques and procedures., • Works with the Principal, Associate or Project Manager to finalize Project Scope and Schedule of deliverables and understands priorities identified., • In addition to duties of project engineer/project designer, applies advanced practices and techniques, adjusts and correlates data, recognizes discrepancies and follows projects through program, schematic, design development, construction document, bidding and construction phases., • Supervises, coordinates and reviews work, schedules and assigns work to meet completion dates., • Develops reports, studies, and system analysis., • Works in an efficient an effective manner and makes good decisions., • Evaluates application of substitute equipment., • Reviews final adjustment of equipment and systems after installation., • Writes or contacts client directly except in controversial matters., • Ability to represent the firm at meetings and cover all trades, which may require further follow through., • Is assisted on projects by other engineers and/or designers., • Estimates workforce needs and schedules and assigns work to meet completion date and updates the project manager as to status and resources available., • Mentors and trains younger engineers and designers., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science or equivalent. Powered by JazzHR CUWEsjdzmC

Job Description * • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption and modifications of standard techniques and procedures., • Works with the Principal, Associate or Project Manager to finalize Project Scope and Schedule of deliverables and understands priorities identified., • In addition to duties of project engineer/project designer, applies advanced practices and techniques, adjusts and correlates data, recognizes discrepancies and follows projects through program, schematic, design development, construction document, bidding and construction phases., • Supervises, coordinates and reviews work, schedules and assigns work to meet completion dates., • Develops reports, studies, and system analysis., • Works in an efficient an effective manner and makes good decisions., • Evaluates application of substitute equipment., • Reviews final adjustment of equipment and systems after installation., • Writes or contacts client directly except in controversial matters., • Ability to represent the firm at meetings and cover all trades, which may require further follow through., • Is assisted on projects by other engineers and/or designers., • Estimates workforce needs and schedules and assigns work to meet completion date and updates the project manager as to status and resources available., • Mentors and trains younger engineers and designers., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science or equivalent. Powered by JazzHR iOhpgFyNQA

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is interviewing for a Senior Commissioning Agent in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption and modifications of standard techniques and procedures., • Works with the Group Manager to finalize Project Scope and Schedule of tasks and deliverables., • Is assisted on projects by other Engineers and/or Designers., • Assembles commissioning team and holds a scoping meeting to identify responsibilities for all parties., • Develops commissioning plan and update as required., • Chairs commissioning meetings as required., • Reviews the owner objectives documentation for clarity and completeness., • Coordinates the commissioning work during all phases of the project., • Conducts reviews of the design, drawings, and specifications at various stages of development., • Develops a design review report including all design related comments, suggestions, recommendations, and cost implications., • Develops project commissioning specifications., • Reviews and accepts contractor submittals applicable to systems being commissioned., • Reviews trade coordination drawings or building model., • Develops and distributes pre-functional checklists., • Reviews and comments on contractor start-up and initial systems checkout plan., • Performs site visits to observe project progress and attend selected jobsite meetings., • Witnesses and documents HVAC piping pressure test and flushing., • Witnesses and documents ductwork testing and cleaning., • Documents construction checklist completion., • Documents systems startups., • Reviews air and water systems balancing reports., • Develops functional performance test procedures for equipment and systems to be commissioned., • Verifies accuracy of air and water testing and balance reports., • Analyzes D.D.C. system trend logs., • Coordinates, witnesses and documents functional performance tests performed by installing contractors., • Maintains a masters issue log., • Reviews equipment warranties and convey owner's responsibilities., • Oversees and approves the training of the owner's personnel., • Reviews and accepts the operating and maintenance manuals for commissioned equipment., • Compiles a commissioning record, which includes a summary report, listing of all outstanding non-compliance items along with recommendations for improvements. Each non-compliance issue shall be referenced to the specific functional test, inspection, trend log, etc., where the deficiency is documented., • Includes Issues log, commissioning plan progress reports, submittal and operating and maintenance manual reviews, training record, test schedules, construction checklists, start-up reports, functional test procedures, and trend log analysis., • Coordinates and supervises required off-season or deferred testing., • Conducts 10-month to 12-month warranty period review., • Develops a pre-warranty expiration report outlining any deficiencies that should be brought to the attention of the representative contractor(s) prior to warranty expiration., • Documents building current operating conditions., • Performs site surveys of building systems., • Develops retro-commissioning plans and testing documentation., • Performs system diagnostics and field testing., • Develops a final report addressing results of retro-commissioning process and recommendations for system improvements., • Provides owner training regarding proper system operation and maintenance., • Compiles a client system manual to use as a tool in long term system operation and maintenance., • Bachelor or Associate of Applied Science Degree preferred., • Eight years of experience in project commissioning or design., • Possesses at least one Professional Commissioning Accreditation., • The compensation range for this position is $87,360 to $120,000 per year. M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, or any other characteristic protected by federal, state, or local laws. Powered by JazzHR FAoDZjV1Vj

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. shift schedule: This is a Monday through Friday role that requires flexibility to be available outside of standard business hours, including occasional weekends as needed. job purpose: The Environmental, Health & Safety Technician (EHS Technician) will provide broad support to the site in the area of Safety, Health, and Environment. The primary objective of the role is to provide regular support to site operations at points of execution (on the shop floor). Promotes and contributes to a site culture where Safety, Health and Environment are engrained as a core value with all employees. Assists EHS program implementation and daily follow-up and trains other employees in key EHS areas as necessary. Ensures on-going excellence in EHS compliance and expected work practices on the shop floor. responsibilities: • Site EHS Culture – under direction of the Site Sr. Environmental, Health & Safety Manager, Technician leads/fosters/develops a culture where safety, health and environment are ingrained as a core value with all employees, everyone believes zero is achievable, everyone is actively engaged in performing their work in a safe manner, everyone actively interacts with co-workers to prevent at-risk behaviors. Coaches the team on Behavior Based Safety Observations and Risk Predictions, • EHS Strategies, Programs and Plans – Implement and participate in company EHS policies, processes and procedures including but not limited to:, • EHS Team Meetings; EHS Committees, SHE Pillar, • Job Hazard Evaluations, Internal Audits, Incident Investigations & Hazard Abatement, • Monitoring and Coaching of High Hazard Work: Confined Space Entry, Electrical Safety, Hot Work, Work at Height, Line Break, Critical Lifting, • Evaluation of Machine Guarding/ Validation of LO/TO/TO Procedures and Worker Competency, • Personal Protective Equipment Risk Assessment/ Evaluation/ Revisions, • Validate Emergency Response procedures/ equipment, • Participate in Emergency Response drills/ evaluate effectiveness, • Take an active role in site waste management audits and practices, • Educate the team on their ISO 14001/ 45001 Requirements, • Chemical inventory and management/ chemical safety assurance, • Compliance and technical expertise support – Provides day-to-day guidance, technical expertise/ coaching and support to all employees regarding health & safety practices, interpretation of company health and safety policies, problem resolution, and compliance with federal and state law, • Safety & Environmental Management Systems (SMS/ EMS) Verification – Performs monthly Safety Inspections to ensure the SMS and EMS requirements are being met in the daily operations of the site so the team is always audit ready, • Incident Investigation and Analysis – Participate in and support all teams in formal incident reviews for all incidents that result in a First-Aid, recordable injury or illness/ reportable environmental event (i.e.: Workers Compensation claim, Lost Time incident, spill or release), project damage or serious Near Miss/ Serious Injury Fatality potential (SIFp), • Risk Assessment and Elimination – Administers the response to, and investigation of reports of hazardous or potentially hazardous conditions; reviews recommendations and/or takes appropriate action to mitigate potential risks, • EHS Capability Building/ Training – Assists in development of EHS capabilities for all employees/ contractors through effective content development, delivery and comprehension of all applicable Site EHS training (to include taking on the majority of the 3rd party training), • Track and report safety KPI's and safety performance for their site, • All other job-related duties as assigned skills/qualifications required: • 5 + years' experience in manufacturing desired. General knowledge of site operations including Maintenance, Sanitation, Warehouse, Refrigeration, and Production. Must have solid track record for EHS, having served as a EHS representative or committee member is considered helpful, • Capable of obtaining OSHA 30-hr certification and First Aid/CPR/AED or higher certification is considered a plus, • Skilled in organizing resources and establishing priorities, able to meet critical deadlines and to maintain confidentiality of records and information, • Must be capable of working in a fast-paced environment with minimal direct supervision and have strong demonstrated leadership, interpersonal, and self-initiative skills, • Good technical understanding of EHS issues and their relationship to Operations/ Engineering and other job functions as it relates to building in prevention, • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. Demonstrated ability to influence across a diverse range of people from Corporate / Division leadership to a factory floor associate, • 12 hours sitting/standing/walking supporting the site teams shift schedule, • Ability to lift up to 50 lbs., • Reaching/bending requirements (if any) – less than 2 hours/day, • Exposure to hazards (machinery, confined spaces, etc.) – must utilize proper PPE in these environments food safety requirements:Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas, • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company, • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system, • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system, • Control further processing or delivery of nonconforming products in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected, • In the event of absence, another employee with the same skill level will assume the duties and responsibilities as required position location: Webster, NY reports to: Site Sr. EHS Manager travel requirements: minimal travel. Occasional off-site visits to other locations. Salary requirement: Non-Exempt *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$30—$36 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description Our Client is expanding its field leadership capacity and is seeking a Field Construction Manager to oversee critical electric utility infrastructure programs across multiple service territories. This role provides direct oversight of construction crews, contractor performance, and technical execution for structure inspection, restoration, and targeted upgrade projects. The position requires strong operational discipline, deep technical fluency, and the ability to drive execution excellence in dynamic field environments. Role Overview The Field Construction Manager is accountable for leading day-to-day field operations across a portfolio of utility construction initiatives. This leader coordinates multi-site activities, ensures compliance with engineering and safety standards, oversees quality performance in the field, and provides guidance that keeps construction workflows aligned with project requirements and operational targets. Key Responsibilities Field Leadership & Construction Oversight • Lead and manage field construction activities, including pole groundline inspection and treatment, wood pole restoration, steel pole and tower inspection/repair, and insulator replacement programs., • Direct job start meetings at service centers, ensuring contractors, inspectors, and internal coordinators are aligned on scope, safety, and schedule., • Identify, evaluate, and report field hazards, ensuring compliance with all safety standards and regulatory protocols., • Oversee quality assurance for contractor installations, including C-Trusses and structural restoration work, taking corrective action where needed., • Coordinate field schedules, align resources, and track progress across multiple workstreams., • Communicate field execution updates to senior stakeholders and provide visibility into risks, delays, and corrective measures. Education & Industry Background • Bachelor’s degree in Engineering or Construction Management with seven years of relevant experience preferred., • Associate degree with ten years of experience, or High School/GED with fifteen years of progression-based experience required., • Minimum of five years of progressive electric utility experience, with a preference for candidates experienced in line or substation construction management., • Extensive knowledge of construction practices for electrical utility lines—including overhead, underground, and substation construction—and commissioning of electrical equipment., • Strong understanding of interconnected electrical systems and their operational implications., • Ability to interpret mechanical and electrical drawings, technical manuals, and field engineering documentation., • Experience with contract preparation, negotiation, and administration., • Excellent written and verbal communication skills, with the ability to produce clear correspondence, reports, and documentation., • Strong leadership mindset with the ability to develop others, manage teams, and lead cross-functional field personnel., • Proven ability to make sound decisions in emergency or high-pressure situations., • High degree of analytical capability, problem-solving skills, and results-oriented execution., • Commitment to safety best practices, field compliance, and operational excellence., • Proficiency with Microsoft Office Suite; SAP experience preferred., • Growth & Continuous Improvement, • Initiative & Change Leadership, • Results-Driven Execution, • Customer-Centric Mindset, • Effective Communication, • Collaboration & Cross-Functional Alignment, • Comprehensive compensation and flexible benefits tailored to individual needs., • Permanent employment with immediate access to life insurance and optional medical benefits., • Professional development through a robust training platform supporting continuous skill advancement. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to Pay Details: $90,000.00 to $105,000.00 per year Search managed by: Christopher Fields Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description We are currently seeking qualified candidates for a Facilities Project Manager position in LaBella’s Environmental Division at our client’s office in Rochester, NY. The Environmental Division at LaBella provides comprehensive management services for multi-year operations and capital programs. Project teams are established to provide a customized mix of business consulting, project management, financial control and monitoring, administrative, and technical support services. Duties: The Facility Project Manager is responsible for overseeing the maintenance, security, capital and operation-based project implementation and overall functionality of properties within the client’s portfolio. Their role ensures that buildings and facilities remain safe, efficient, and well-maintained for tenants, employees, or visitors. The Facility Project Manager would work directly with, and report to, the client’s Building Asset Management Senior Manager, for New York Building Operations and Projects. • Supports the Client’s Facility Senior Manager in the day-to-day operational management of all aspects of the property to ensure maintenance of approved quality standards., • Responsible for the preparation and coordination of all maintenance programs relating to interior and exterior conditions and appearance of the properties., • Responsible for the completion of work order requests in a timely fashion and to the satisfaction of the requested associate. May coordinate with Senior Manager or other maintenance staff regarding completion of requests., • Effective leadership in a matrix organization., • Maintenance and Repairs: Oversee routine maintenance, inspections, and emergency repairs., • Vendor and Contract Management: Negotiate contracts with service providers for cleaning, security, landscaping, system maintenance and repairs, and other facility needs., • Budgeting and Cost Control: Manage financial aspects, including budgeting for repairs, utilities, and operational expenses., • Compliance and Safety: Ensure the property meets government regulations, environmental standards, and health and safety requirements., • Security and Risk Management: Implement security measures and emergency preparedness plans. Requirements • Project Management Institute (PMI) Project Management Professional (PMP) preferred., • Direct experience managing building portfolio projects such as HVAC, office renovations, power systems / generators, site infrastructure / parking lot improvements, UPS and building additions / new structures., • Minimum of 3-5 years of facility coordination or management experience required., • Ability to work well with a variety of different individuals both inside and outside of the company., • Ability to handle multiple complex tasks with minimal supervision while also adhering to the policies and procedures and Owner objectives., • Mechanical knowledge to understand and address maintenance issues promptly., • Strong computer, writing and communication skills., • Strong leadership skills to manage a team effectively. Salary Range: $65,000 - $95,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. o Flexible Work Schedule o Health/Dental Insurance o 401k Plan with Employer Match o Short & Long Term Disability o Profit Sharing o Paid Time Off o Leadership Development Program o Fitness Reimbursement o Tuition Reimbursement o Referral Bonus Program o Wellness Program o Team Building Events o Community Service Events

Key Responsibilities Manage the successful delivery of small-to-medium sized projects or specific work streams within larger projects Develop project plans, maintain documentation, and analyze issues/risks throughout all project phases Create issue resolution and risk mitigation plans to ensure

A company is looking for a Client Services Associate Project Manager to assist in project management coordination and execution for North America clients.Key Responsibilities Ensure client and project requirements are met with high quality and accuracy through regular communication Convert client

Ready to Lead High-Stakes Real Estate Transactions? Underberg & Kessler LLP is seeking a skilled and confident Commercial Real Estate Associate Attorney with at least 7 years of experience to join our Real Estate & Finance Practice Group. This is a high-impact role for an attorney who thrives on deal-making, strategic advising, and client leadership. Our clients include regional and national developers, financial institutions, municipalities, and growth-oriented businesses—and we’re looking for someone who can manage complex transactions from start to finish while serving as a trusted legal partner. What You'll Do: Real Estate Transactions • Lead commercial acquisitions, dispositions, development, leasing, and financing, • Draft, review, and negotiate a wide range of real estate contracts, including purchase and sale agreements, loan documents, easements, and leases, • Conduct comprehensive title and survey reviews and resolve encumbrance issues, • Oversee due diligence, including environmental, zoning, and land use compliance, • Manage the full lifecycle of real estate closings—from kickoff to compliance Client Representation & Advisory • Serve as lead counsel for developers, lenders, municipalities, and investors, • Provide strategic advice on risk mitigation, deal structuring, and regulatory matters, • Work directly with senior decision-makers and in-house legal teams, • Represent clients in development projects, including negotiations with municipal bodies Team & Project Leadership • Supervise and collaborate with paralegals, closing coordinators, and legal staff, • Partner with attorneys across practices (litigation, tax, corporate, trusts & estates), • Mentor junior attorneys and contribute to the group’s knowledge-sharing culture, • Support business development initiatives and client-focused innovation What You Bring: • Minimum 7 years of commercial real estate law experience, ideally in a firm setting, • Admission to practice in New York State and a J.D. from an accredited law school, • Proven ability to lead deals, advise clients, and manage transaction teams, • Strong negotiation, drafting, and project management skills, • Bonus points for experience with tax credit financing, municipal approvals, or commercial leasing What We Offer: • Competitive salary with structured bonus potential, • 401(k) with profit sharing + employer contribution, • Comprehensive benefits: health, dental, vision, life, and disability coverage, • 4 weeks PTO, plus 9 paid holidays, • Hybrid schedule available after onboarding, • Ongoing professional development, mentorship, and leadership opportunities About Underberg & Kessler LLP With a legacy of excellence spanning over a century, Underberg & Kessler is a full-service law firm deeply embedded in the business landscape of Western New York and beyond. We pride ourselves on our collaborative culture, high-stakes legal work, and long-term client partnerships. Here, your legal skills will not just be valued—they’ll help shape the future of our clients' success. Underberg & Kessler LLP is an Equal Opportunity Employer. We value diversity and are committed to creating an inclusive environment for all employees. Please submit your cover letter, references and resume to Leslie Helmerci, Legal Operations and HR Manager at

Job Description Utility Channel Sales Representative – An opportunity to join an industry leader experiencing explosive growth and opportunities. DiVal Safety has been recognized as The Best Place to Work in WNY for the past 15 years. DiVal Safety Equipment, a leader in the Fire, EMS and industrial safety equipment distribution business, is looking for a self-motivated individual that works well as part of a team to grow our Utility division reporting directly to the Utility Channel Sales Manager. In this position you will be responsible for serving and growing business and relationships with established customers. Also, you will be responsible for growing your channel within your region in new accounts, sales, services and profit. About DiVal Safety DiVal Safety is a premier B2B distributor on safety equipment, industrial and contractor tools and supplies, maintenance repair, and operating (MRO) products. In addition to the wide range of products we carry, we also test, service and repair many of the products we supply. We are a values-based company with a “Whatever it takes” attitude that relies on professional relationship sales and a proven results-oriented approach that was established in 1977. Our channel representatives have a vast potential for excellent earnings and a career of entrepreneurial opportunities, professional development and advancement. Join the DiVal Safety Equipment team as a member of our fast-paced, well trained and dynamic team. The position comes with a base salary plus commission, expenses and car allowance. Duties and Responsibilities: • To achieve annual required growth, • 50% of your time in front of the customers and prospects in your territory, • To continually uncover new sales opportunities and create new business opportunities, • Manage and hit supportive metrics (calls, appt, opps, and quotes) in CRM, • To plan sales calls via call objectives and high-value questions, • Regular meetings with specialists in your territories to help improve the customer experience and meet all potential needs., • Identify new value driven products for your customers, • Work with the corporate accounts division to create relationships with key accounts at the highest levels, • Focus on the horizontal growth and lost business within accounts Professional Skills and Requirements: • Demonstrates mastery of skills in the areas of consultative selling, marketing principles, prospecting, networking and negotiations., • Live by the DiVal Core Values, • Ability to read, analyze, and interpret basic sales reports, • Have a firm understanding of the competitive situation within your accounts, and within your territory, • Well-versed in basic math, • At least 2-3 years’ experience in Sales, • Excellent organizational skills and project management skills, • Minimum college associate degree, • Ability to acquire a functional knowledge of a variety of computer programs, • Valid driver’s license and acceptable vehicle record, • Abide by the dress code of DiVal, • Meet travel requirements- Territory travel average of 3-5 overnights/month, with an additional 8-12 overnights of corporate travel/ year. Physical Demands: • Must be able to lift and carry up to 50 pounds when required, • Ability to withstand long periods of time working on a computer Benefits: • Based on salary plus commission, • Comprehensive sales training and onboarding process, • Medical benefits, • Dental benefits, • Other voluntary benefits (STD, LTD, Accident, Critical illness, Life insurance), • Company provided life insurance policy, • 401K, • Paid time off DiVal Safety Equipment is proud and dedicated to be an Equal Opportunity Employer (EOE) of Minorities / Women / Veterans / Disabled.

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is currently interviewing for a Plumbing/Fire Protection Project Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate, and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimating., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR 1gMjSK2pvt

A company is looking for an Associate Manager, Professional Marketing to support key programs across the Pro channel.Key Responsibilities Assist in executing Pro Marketing programs, managing recurring tasks, and maintaining the Pro website Coordinate with various teams to ensure project alignment

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay Stark Tech is seeking a Senior Project Manager who excels by leading complex building infrastructure projects with exceptional technical, financial, and operational discipline. You bring structure, clarity, and accountability to every phase of delivery-from contract kickoff through commissioning and closeout-ensuring projects are executed safely, on schedule, within scope, on budget. You excel at coordinating cross-functional teams, subcontractors, and internal resources while serving as the primary customer advocate and decision-maker. With strong financial acumen, proactive risk management, and a commitment to quality and communication, you drive predictable outcomes, elevate team performance, and reinforce Stark Tech's project delivery standards across the organization. What are we looking for • Associate degree required; Bachelor's degree preferred. Advanced degree a plus., • 10+ years of project management experience in building infrastructure, construction, or energy-focused projects., • OSHA 10-hour certification required; OSHA 30-hour preferred., • Expertise in applicable codes, industry standards, and safety regulations., • Strong understanding of construction contracts, T&Cs, scopes, insurance requirements, and subcontractor management., • Proven ability to manage budgets, labor plans, cost controls, billing, forecasting, KPIs, and financial reporting., • Proficiency in project management software such as Procore, MS Project, and PowerBI, as well as Microsoft Office., • Skilled at negotiating, processing, and validating change orders while protecting schedule and financial performance., • Demonstrated ability to mentor and train Project Managers, Assistant PMs, and Project Engineers., • Strong communication skills to serve as the primary customer contact and collaborate with internal teams, subcontractors, and vendors. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is currently interviewing for a Mechanical Project Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate, and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimating., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR wWoIey1Uza

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is currently interviewing for an Electrical Project Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager, or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimations., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR 0L6PZVARCg

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Project Manager II to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: The Electric Ops team will need a Project Manager II (PMI) resource in NY East area to assist with the Distributed Generation Interconnection Projects, managing numerous solar projects currently in construction and expected to be completed before year-end as well as a larger suite of projects which will be in construction through 2025-26. This resource will play a critical role in managing and tracking project progress while collaborating with existing construction managers and other division personnel to ensure timely, on budget, and successful project delivery. This position will support projects across RGE, Rochester division and will travel to sites if needed. • Assists Avangrid Project Managers in managing office administration and field operations for Project Management Integration., • Expertise in data analysis., • Involvement in work management, quality and project safety requirements., • Bachelor's Degree with two-five (2-5) year experience in energy sector, • Certified Associate in Project Management or Project Management Professional Certification, • Proficient in Microsoft Project, Excel, PowerPoint, and Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job DescriptionAbout DDS Engineering and Surveying, LLP DDS Engineering and Surveying, LLP pioneers precision in land surveying, fueling infrastructure projects that shape communities. Our expert team leverages cutting-edge tools like sUAV photogrammetry and point cloud processing to deliver reliable, high-impact survey solutions for utility, energy, and construction clients. Join us to apply your boundary survey expertise in a fast-paced, collaborative environment, where your work drives project success and career growth. Join Our Team: At DDS, you’ll harness advanced technology to deliver precision for transformative projects, from energy infrastructure to community development. Our supportive culture and commitment to safety and quality empower you to grow alongside industry leaders. Benefits: • Health, Dental, and Vision Plans, • 401K with match, • Paid Time Off (PTO), • Life and AD&D coverage, • Short and Long-Term Disability, • HSA and or FSA Accounts, • Process survey data using Trimble Business Center and Carlson for accurate boundary, topographic, and utility survey deliverables., • Perform point cloud processing with Leica Register 360 for 3D modeling and CAD integration., • Conduct sUAV aerial photogrammetry using Pix4D to produce orthomosaics, digital surface models, and topographic data., • Draft survey maps, certified plats, and exhibits using AutoCAD Civil 3D, AutoCAD Map 3D, and/or MicroStation, adhering to client and regulatory standards., • Prepare precise legal descriptions, including metes and bounds and ALTA survey descriptions, for boundary surveys and easements., • Conduct deed research, locate and analyze monuments, and prepare certified boundary plats for complex projects., • Collaborate with field survey crews to ensure data accuracy, occasionally supporting field tasks (e.g., quality control, site verification)., • Work with professional engineers from DDS’s Land Development and Energy Services Groups to integrate survey data into infrastructure projects., • Engage with clients to clarify project requirements and deliver high-quality deliverables on time., • 5–10 years of land surveying experience, with strong expertise in boundary surveys (e.g., deed research, monumentation, certified plats)., • Proficiency in survey data processing with Trimble Business Center and Carlson., • Experience with point cloud processing (Leica Register 360) and sUAV aerial photogrammetry (Pix4D)., • Advanced CAD drafting skills with AutoCAD Civil 3D, AutoCAD Map 3D, and/or MicroStation., • Ability to write accurate metes and bounds and ALTA survey legal descriptions., • Knowledge of land surveying principles and deliverables (e.g., boundary, topographic, ALTA, utility surveys)., • Strong problem-solving skills, attention to detail, and ability to work independently or collaboratively., • Valid driver’s license with a clean driving record for occasional field work.Preferred, • Associate or bachelor’s degree in surveying, geomatics, or related field., • Professional Land Surveyor (PLS) license or Surveyor-in-Training (SIT) certification., • Certified Survey Technician (CST) or FAA Part 107 sUAV certification., • Experience with additional survey types (e.g., utility designation, construction stakeout, right-of-way). Powered by JazzHR p6YrktN8uJ

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is interviewing for an Electrical Design Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Performs assignments designed to develop the skills of the Design Engineer., • Utilizes engineering principles and standard designs to develop project designs and layouts., • Works with Senior Engineer, Project Engineer, Group Manager, Associate and/or Principal., • Independently performs assignments after instructions as to the general results expected., • Receives guidance on unusual problems and supervisory approval on developed plans., • Assists in the preparation of contract documents., • Plans, schedules, conducts all phases of the work in a part of or a total project of moderate scope., • Performs conventional engineering work including standard designs., • Makes engineering calculations., • Develops elementary designs expanding on detailed schematic sketches., • Coordinates production and coordination with Senior Engineer/Designer or Project Engineer/Designer., • Associate Degree, Bachelor of Science Degree, or equivalent combination of education and experience. Powered by JazzHR uTZmuQFZiU