Cdl no experience jobs in Cherry Hill, New JerseyCreate job alerts

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jordon or text "Philadelphia" to 904-489-7273 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. For More Info Call Jordon or text "Philadelphia" to 904-489-7273 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 1 month ago (10/29/2025 3:14 PM) Requisition ID 2025-190625 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $41.00/Hr. Max Pay USD $41.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call William or Text "Philly MS2" to 904-541-8565 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $38.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • One (1) year or more federal PM certification requirements through any combination of classroom training or work experience totaling 1 year, • One (1) year or more mechanical experience working offsite at customer locations preferred, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practicesEntrepreneurial spirit, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • Battery Charge and Check, Warranty, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • OEM on-line engine courses (minimum 2), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with non-contractual Ryder customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss any repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform basic system checks such as power to compressor, visual inspection of condenser, belt tension, etc.; Identify Freon and oil leaks., • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified., • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes., • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions., • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check., • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation., • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems., • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables., • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights., • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers., • Driveline: Lubricate drive line; Inspect components for wear or damage., • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks., • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc... for proper integrity and condition., • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal., • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc., • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism., • Utilize key functions of Shop Management System and electronic documentation available. - Perform work in accordance with all federal/ provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 5 days ago (11/25/2025 1:05 PM) Requisition ID 2025-191921 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001312 Min Pay USD $38.00/Hr. Max Pay USD $38.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel and Auto Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jenny or Text "Philly MS3" to 904-541-8573 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply) Tuesday-Saturday, • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 5 days ago (11/25/2025 1:23 PM) Requisition ID 2025-192013 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $41.00/Hr. Max Pay USD $41.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jenny or Text "Philly MS3" to 904-541-8573 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 5 days ago (11/25/2025 1:25 PM) Requisition ID 2025-192014 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $41.00/Hr. Max Pay USD $41.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Chelsey or Text "Philly MS2" to 904-932-0143 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $38.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply) Tuesday-Saturday, • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • One (1) year or more federal PM certification requirements through any combination of classroom training or work experience totaling 1 year, • One (1) year or more mechanical experience working offsite at customer locations preferred, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practicesEntrepreneurial spirit, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • Battery Charge and Check, Warranty, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • OEM on-line engine courses (minimum 2), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with non-contractual Ryder customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss any repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform basic system checks such as power to compressor, visual inspection of condenser, belt tension, etc.; Identify Freon and oil leaks., • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified., • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes., • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions., • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check., • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation., • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems., • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables., • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights., • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers., • Driveline: Lubricate drive line; Inspect components for wear or damage., • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks., • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc... for proper integrity and condition., • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal., • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc., • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism., • Utilize key functions of Shop Management System and electronic documentation available. - Perform work in accordance with all federal/ provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 5 days ago (11/25/2025 1:10 PM) Requisition ID 2025-191924 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001312 Min Pay USD $38.00/Hr. Max Pay USD $38.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jordon or text "Philadelphia" to 904-489-7273 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. For More Info Call Jordon or text "Philadelphia" to 904-489-7273 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 11 hours ago (12/3/2025 8:54 AM) Requisition ID 2025-192311 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $41.00/Hr. Max Pay USD $41.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jordon or text "Philadelphia" to 904-489-7273 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $43.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. For More Info Call Jordon or text "Philadelphia" to 904-489-7273 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Four (4) years or more Relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair, • Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support, • Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable, • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements. Posted Date 11 hours ago (12/3/2025 8:52 AM) Requisition ID 2025-192310 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374 Min Pay USD $43.00/Hr. Max Pay USD $43.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jordon or text "Philadelphia" to 904-489-7273 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. For More Info Call Jordon or text "Philadelphia" to 904-489-7273 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 1 month ago (10/29/2025 3:15 PM) Requisition ID 2025-190626 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $41.00/Hr. Max Pay USD $41.00/Hr.

Job Description First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. Now Hiring Part-Time School Bus Drivers in Philadelphia, PA! As a First Student Part-Time School Bus Driver, you will play a vital role in your community and the lives of the students you transport. You will be there at the start of the student's day with before-school pickup and at the end with an afternoon shift to bring students safely back home. No experience as a bus driver is required! We're proud to train you with our industry-leading technology to help you succeed. Your day will include: * A split shift, which means an early morning before-school pickup and an after-school drop-off with a few free hours in between * A guaranteed shift of (5) hours per school day, no working nights or weekends unless you want to * Additional hours gained through trips and charters when available School Bus Driver benefits: * $24.40/HR starting wage, based on school bus driver experience. * Medical, Dental, & Vision Benefits plus 401k Retirement Savings Plans (Benefits offered may vary by location or CBA) * No experience necessary. We offer paid CDL training! * Child-Ride Program if child is enrolled in district For our bus Driver roles, First Student encourages applications from candidates who: * Do not have a college degree or high school diploma * Have military experience * Are returning to the workforce or looking for a second job * Are retirees * Are looking to jump start a new career You might be a good fit if you: * Are looking for a part-time schedule * Enjoy working with students * Are at least 21 years old * Have a valid driver's license for at least 3 years This position is subject to DOT drug testing as a safety-sensitive employee. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including marijuana, for any reason. *Conditions apply; see locations for details. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request . Company DescriptionAbout us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

J&R Schugel is Now Hiring CDL-A Dry Van Truck Drivers! \nEarn $74,000 - $85,000 per Year** - $500 Onboarding Bonus* \n\n CDL-A Dry Van Truck Driver Pay & Miles: \n\n\n\t • Earn $0.595 - $0.68 CPM*\n\t, • Earn $74,000 - $85,000 per year**\n\t, • Veterans earn an additional $0.01 CPM\n\t, • CDL-A drivers average 2,200 - 2,500+ miles per week\n\t, • $500 onboarding bonus* + $1,000 vacation pay\n\t, • Bi-annual compensation reviews + unlimited referral incentives - $2,000 per driver\n\t, • Valid CDL-A, 21+\n\t, • 6 months of recent OTR or regional CDL-A experience in last 3 years\n\t, • 2022 - 2026 Kenworth trucks with APU, Inverter & Auto Transmission***\n\t, • 100% no-touch freight, no forced NYC dispatch\n\t, • Regional opportunities available based on location - ask your recruiter for details!\n\t, • Pet & rider program\n\t

J&R Schugel is Now Hiring CDL-A Refrigerated Truck Drivers \nEarn $78,000 - $90,000 per Year** - $500 Onboarding Bonus* - No-Touch Freight \n\n Drive top-notch 2016 & newer refrigerated trailers, hauling dairy, frozen goods, and other temperature-controlled products across the lower 48. With our Reefer Pay Package, you’ll earn more on your base pay while moving premium freight with steady miles. We offer multiple home-time options based on your location and keep you rolling in comfort with late-model equipment. If you’re a pro CDL-A driver ready to run refrigerated freight and cash in, we’re ready for you. \n\n CDL-A Refrigerated Truck Driver Pay & Miles: \n\n\n\t • Earn $0.625 - $0.71 CPM*\n\t, • Earn $78,000 - $90,000 per year**\n\t, • Veterans earn an additional $0.01 CPM\n\t, • CDL-A drivers average 2,200 - 2,500+ miles per week\n\t, • $500 onboarding bonus* + $1,000 vacation pay\n\t, • Bi-annual compensation reviews + unlimited referral incentives - $2,000 per driver\n\t, • Valid CDL-A, 21+\n\t, • At least 1 year of experience preferred; 6 months minimum required\n\t, • Refrigerated experience\n\t, • 2022 - 2026 Kenworth trucks with APU, Inverter & Auto Transmission***\n\t, • 100% no-touch freight, no forced NYC dispatch\n\t, • Pet & rider program\n\t, • Medical, Dental, Vision, Life, 401(k).\n\t

TMC is now hiring CDL-A Recent Graduates \nNo Experience? No Problem! New Drivers Earn $100,000+/Year! \n\n Why Choose TMC? \n\n\n\t • New drivers are earning $100,000+ per year\n\t\n\t\t, • Earn $1,350 - $1,600 per week\n\t\n\t\n\t, • Home Weekends - Our drivers typically run within a 1,200-mile radius of their home\n\t, • Best-In-Class Training - TMC has been training students for almost 30 years\n\t, • Health Insurance - Medical, dental, vision, and prescription\n\t, • 401(k) with company match\n\t, • STEP ONE: Request info by submitting this form\n\t, • STEP TWO: Complete the TMC online driver application (Provided upon completion of step one and takes about 10 min)\n\t, • Weekly pay & direct deposit\n\t, • Employee Stock Ownership Plan (ESOP)\n\t, • Top-quality Peterbilt equipment\n\t, • Paid vacation\n\t, • Class A CDL\n\t, • No recent DOT-reportable accidents or DUIs\n\t

Overview: Imagine a career that truly takes you places, where you get to travel and meet new people every day along the journey. For 100 years, our Greyhound Drivers have been the heart and soul of our company, serving the transportation needs of communities across the nation. Do you enjoy meeting new people and have a passion for safety and the customer experience? Interested in a job that pays you to travel? Come join us in serving America's passengers as we continue our legacy of putting the wheels in motion. Responsibilities: • Operate a bus in a safe and efficient manner, adhering to traffic laws and safety regulations, • Follow designated routes and schedules, making necessary adjustments when required, • Ensure the safety and comfort of passengers by providing assistance when needed and maintaining a clean bus, • Perform pre-trip and post-trip inspections to ensure the bus is in good working condition, • Maintain a clean and orderly bus, including regular cleaning of the interior and exterior, • Report any maintenance issues, accidents, or incidents to the appropriate authorities, • Assist passengers with boarding, exiting, and securing their personal belongings, • Follow emergency procedures and respond to incidents in accordance with company protocols, • Keep records of miles driven, fuel usage, and other required documentation, • Stay updated on company policies and safety procedures Qualifications:, • Fully Licensed with Class A or B Commercial Driver's License (CDL), • Possesses Passenger 16+ endorsement and no air brake restriction, • 22 years of age or older, • Able to pass a DOT physical and pre-employment drug screen, • Full-time employment consideration only, • Ability to work varied schedule based on regional driver needs Benefits • Medical, Dental, and Vision Plans, • 401K with company-matched contributions, • Life Insurance, • Paid Vacation, Holidays, and Sick Days, • Free Travel Passes, • Annual Uniform Allowance, • Driver Union membership & representation, • Career Advancement Opportunities Compensation Range: USD $29.40 - USD $31.28 /Hr.

Job Description • Weekly pay average is $1600 - $2000, • Home every weekend, • No NYC, Mexico, or Canada, • Tons of bonus and incentive programs, • No touch freight Minimum Job Requirements for CDL-A Truck Drivers: • Must have 9-months recent tractor trailer driving experience without a trainer, • Must possess a valid Class A CDL license, • Must be able to pass a pre-employment drug screen Truck Driver Job Perks: • Medical, Dental and Vision life insurance, • 401K with company-matched funds, • Virtual orientation, • PTO accrual and more! Click Apply Now to get your spot saved in orientation. Luckey Logistic is currently hiring Class A CDL Truck Drivers for a variety of full-time, permanent driving positions across the United States. We proudly offer opportunities for Local, Regional, and OTR (Over-the-Road) CDL-A drivers, providing dependable miles, competitive weekly pay, and steady freight. Our company values safety, integrity, and respect, and we are committed to helping every driver build a stable and rewarding trucking career. At Luckey Logistic, we believe diversity drives success. We are proud to be an Equal Opportunity and Affirmative Action Employer, dedicated to creating a safe, inclusive, and supportive workplace for all qualified drivers. We consider every applicant without regard to race, color, religion, creed, national origin, ancestry, sex, sexual orientation, gender identity or expression, age, disability, veteran status, or any other characteristic protected by federal, state, or local law. We recognize the essential role that professional CDL-A drivers play in keeping America moving. Whether you are a seasoned driver or looking for your next long-term position, we encourage you to apply and join a carrier that values your commitment and experience. Our goal is to provide equal access to meaningful driving opportunities, fair compensation, and ongoing support to help every driver succeed. Luckey Logistic complies fully with all applicable labor and employment laws, including those ensuring nondiscrimination and equal opportunity in hiring, training, and advancement. We believe every driver deserves to be treated with fairness and respect while working in a professional, safety-focused environment. If you are passionate about reliable service, safe driving, and working with a trusted logistics company, we invite you to apply today. Equal employment opportunity applies to all aspects of employment, including recruitment, hiring, training, promotion, benefits, and compensation. Join a logistics company where your skills matter, your safety comes first, and your success is our priority.

Job Description Join a top-paying regional dry van fleet hauling 100% no-touch freight across the Northeast and Midwest. Enjoy steady miles, consistent pay, and weekly home time Average Weekly Pay: $1,700–$2,100 Home Time Flexible: Out 2–3 Weeks, Home 3–7 Days Based on Your Preference Freight: Dry van, 100% No-touch, Mostly drop & hook Coverage Area: IL, IN, OH, PA, MA, CT, NJ, MD, WV, VA, and NC. Reliable freight. Great pay. Weekly home time. Requirements • Valid CDL-A license with a clean driving record, • Minimum 9 months of OTR/commercial driving experience, • Clean MVR for the past 3 years (Incidents reviewed on a case-by-case basis), • Must be 21 years of age or older Health & Financial Benefits • Medical, Dental & Vision Plans – Competitive options for individuals and families, • 401(k) and/or IRA Plans – Secure your future with company-supported retirement savings, • Life Insurance: Basic, Voluntary, and AD&D (Accidental Death & Dismemberment), • Disability Coverage: Short-Term & Long-Term options available, • Vacation Days, Sick Leave & Paid Holidays, • Ongoing Training & Development Programs, • New, well-maintained trucks, • 100% No-Touch Freight, • All Drop & Hook, • No New York routes, • Assigned trucks – no slip seating, • 0–100 miles: $35/load, • Quarterly CSA Safety Bonus: Up to $875 (with Hazmat), • Quarterly On-Road Safety Bonus: $600, • Annual Anniversary Bonus: $100 per year of service, • Referral Bonus Program, • Detention Pay: Starts after 1 hour

Job Description We're seeking experienced CDL A drivers for a well-established carrier partner. This is an opportunity to join a professional operation with consistent routes and competitive weekly pay of $1,300 to $1,450. What We Offer: • Nationwide routes with diverse freight opportunities across multiple regions, giving you the chance to experience different parts of the country while building your professional driving career, • Long-haul positions designed for drivers who prefer high mileage and extended time on the road, with routes structured to maximize your earning potential, • 24/7 dispatch and driver support to ensure you have assistance whenever you need it, whether you're dealing with route changes, equipment concerns, or scheduling questions, • Comprehensive benefits package including multiple medical plan options to fit your needs, dental and vision coverage, 401K retirement plan with company matching contributions, and life insurance benefits to protect your family's future Candidates must hold a valid CDL A license in good standing with a clean driving record and no major violations. We're looking for drivers who demonstrate a strong commitment to safety protocols and professional conduct on the road. The ideal candidate is reliable, possesses strong communication skills, and is comfortable handling long-haul routes with extended time away from home. About ATG Recruiting: ATG Recruiting connects qualified CDL A drivers with reputable carriers nationwide. We partner with transportation companies that value their drivers and provide the support needed for long-term success on the road. Our role is to match experienced drivers with carriers that align with their preferences for route types, home time, and career goals. Our team carefully reviews each submission and contacts qualified candidates to discuss opportunities that align with your experience and preferences. We are committed to a workplace that promotes equality, respect, and inclusion. Job Posted by ApplicantPro

Job Description American Trucking Group Hiring Area: Philadelphia, PA 19102 CDL A Truck Driver $40 per hour | $1600 to $1615 per week Monday - Friday with a 5 AM start time American Trucking Group is hiring Class A CDL drivers for an exceptional local opportunity that checks every box. Earn $40 per hour with guaranteed overtime pay, start work early and be home every night, and enjoy full benefits from day one. This is stable Monday through Friday work with no overnight runs, delivering technology equipment to data centers within a 50-mile radius. With immediate openings and real growth potential, this position offers the pay, schedule, and career trajectory that experienced drivers have been searching for. Compensation and Schedule Earn $40.00 per hour with time-and-a-half overtime after 40 hours. Weekly earnings are $1,600 to $1,615 based on a standard 40-hour work week. Full benefits including medical, dental, and vision coverage begin immediately on your first day. Work schedules typically start around 5:00 AM with shift lengths ranging from 6 to 12 hours depending on daily volume. This is a five-day work week with weekend availability as needed. Key Responsibilities • Operate commercial vehicles in compliance with DOT and FMCSA regulations while performing daily pre-trip and post-trip inspections, • Pick up server racks and technology equipment from designated warehouse locations and secure loads properly for transport, • Deliver equipment to data center sites and assist with unloading and staging for installation teams, • Complete accurate Proof of Delivery documentation and maintain professional communication with management A valid Class A CDL driver license. We prefer candidates with two years of commercial driving experience but will consider qualified applicants with one year. Warehouse, moving, or driver unload experience is preferred. Candidates must be able to lift 50 pounds repeatedly and work in variable outdoor conditions. How to Apply Submit your application today for immediate consideration. Our recruiting team will review your qualifications and contact you promptly to discuss this opportunity. Positions are filling quickly, and we are prepared to move qualified candidates through the hiring process rapidly. American Trucking Group is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Job Posted by ApplicantPro

Job Description Home Every Other Weekend • Strong Weekly Pay • A Team That Puts Drivers First Hiring Area: Philadephia, PA - 19019 Looking for a trucking job where you're treated like family instead of a number? This opportunity is built for Class A CDL drivers who want reliable home time, steady pay, and a company that genuinely has their back. What You Can Count On • Predictable Home Time: Be home every other weekend for a full 48 hours. Take your truck with you, and parking costs are covered if needed., • Solid Weekly Income: Drivers average $1,500–$2,000 per week, based on verified experience., • Easy, No-Touch Freight: Mostly no-touch loads running primarily east of I-35 for smoother days and fewer delays., • New, Comfortable Equipment: Drive a 2021 Freightliner Cascadia or Kenworth with refrigerator, APU, inverter, TV mount, and microwave mount. Job Posted by ApplicantPro

Job Description We are hiring Company OTR Drivers for long-haul positions across the U.S. Earn strong weekly pay, drive modern trucks, and get 24/7 support. Pay & Benefits $0.72 per mile – paid on all loaded & empty miles Weekly take-home: $2,000–$2,500 Weekly settlements every Friday Direct deposit available 24/7 dispatch & support No forced dispatch Dedicated loads Route & Miles Runs all 48 states, mainly Midwest, Southeast, East, Northeast Minimum 4,000 miles/week, average 4,500 miles/week Includes day/night driving, overnight hauls, weekends OTR: 3–4 weeks out, 3-5 days home Equipment Trucks: 2023–2026 (Volvo, Freightliner, Kenworth, International) Trailers: 2024–2026 REEFER Requirements Valid CDL Class A Minimum 2 years experience Clean or reasonably clean MVR Reliable and professional

Job Description Full job description Trainee Opening: Yes, straight salary pays for 4 to 6 weeks of Training - $650/week No touch Freight • We are seeking a reliable and skilled Truck Driver to join our team. The ideal candidate will be responsible for transporting goods safely and efficiently while adhering to all safety regulations and company policies., • Earning per week: $ 1,200 to $ 1,400, • Training Pay: $650 per week, • Driving Dry Van and some Refrigerated Loads to deliver designated locations., • Conduct pre-trip and post-trip inspections of the vehicle to ensure safety and compliance with regulations., • Maintain accurate delivery logs and documentation as required by company policies., • Communicate effectively with dispatchers and customers regarding delivery schedules and any issues that may arise during transport., • Valid Class A CDL license, • Must be at least 21 years’ old, • Minimum 0 months’ experience, • Willing to work Over-the-Road (OTR), • Excellent time management skills with the ability to meet deadlines. Anthony directly at (404) 300-9003. Job Type: Full-time Pay: $1,200.00 - $1,400.00 per week Benefits: • 401(k) matching, • Disability insurance, • Employee assistance program, • Life insurance, • Paid orientation, • Paid training, • Passenger ride along program, • Pet rider program, • Prescription drug insurance, • Bonus opportunities, • Detention pay, • Performance bonus, • Safety bonus, • Company driver Vision Truck Line LLC is a licensed contract carrier and property broker as defined by the Federal Motor Carrier Administration and the United States Department of Transportation. Headquartered in Conley, GA 30288 contracted throughout the continental United States. Our company has maintained late model fleets of tractor and trailers equipment with GPS tracking and Air Resources Board compliant devices. The entirety of this site is protected by copyright 2025 VisionTruckLine.com

Job Description Semi Truck Driver Needed Please read entire ad NO RECENT GRADS No Sap Drivers- Hair Follicle Drug Screening No accidents or incidents within past year Must Have Valid Class A CDL CDL address must match hiring area Major carrier Nationwide Fleet, W2 + all benefits available - Late Model Freightliner Cascadias-Automatics! Must have 6 months 53' Tractor Trailer Experience within past year or start as Trainee* Reefer OTR Eastern Half of Country Drop & Hook, Live load/ Unload 2 weeks out .59-.74 cpm based on experience 1600-2100 miles per week $1300-$1400 Weekly Average! 6 months 53' Tractor Trailer experience within past year required or start as trainee NO RECENT GRADS (Training Over the Road 4-6 Weeks. $650 Weekly Flat Rate During training) No Sap Drivers Hair Follicle Drug Screening CLEAN CDL = No Accidents Incidents within past year

Job Description Please read entire ad 3 Months Class A 53 Tractor Trailer/ Flatbed Experience within past year Required (Not Counting school) No Sap Drivers Hair Follicle Drug Screening Clean CDL = No Incidents or Accidents within past year! Northeast Regional Dry Van Home Weekly 34 hr reset Willingness to drive in NYC is a plus but not required. Running area for the fleet can be anywhere from VA to ME • Weekend Freight Option: This is not a weekend-off schedule. Drivers who choose to stay out instead of going home for their reset can pick up additional weekend freight for extra miles and pay., • Pay scale based on verified experience:, • 3-11 months: $0.80 per mile, • 1 year: $0.81 per mile, • 2 years: $0.82 per mile, • 3 years: $0.83 per mile, • 4 years: $0.84 per mile Long Island (borough): $65 o Detention: $12.50/hour (after 2 hours). $1500-$1700 Weekly Average for top Earners! Please apply with updated resume showing all 53 experienceor text Benny 689-207-7311 (TEXT Only) Please Text. What city you are in, How much 53 experience No Sap Drivers- Hair follicle drug screen No accidents or incidents within past year No terminations from last driving job • Drive in 2021 or newer Freightliner Cascadias or Kenworths., • 1 year = 1 week, • 3 years = 2 weeks, • 7 years = 3 weeks Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid orientation, • Paid time off, • Vision insurance

Job Description Your Road to a Successful Truck Driving Career Starts Here Join one of the nation's leading trucking companies and begin a rewarding career behind the wheel. We are now hiring motivated individuals ready to earn their Commercial Driver's License (CDL) through our company-sponsored training program. What We Offer: ● Paid CDL training - no upfront tuition costs ● Job placement opportunities upon successful program completion ● Earn $55,000-$85,000+ annually in your first year ● Weekly pay and consistent miles ● Modern, well-maintained fleet and nationwide support ● Ongoing training, mentorship, and safety programs ● Clear paths to dedicated, regional, and long-haul opportunities Requirements: ● At least 21 years of age ● Valid U.S. driver's license with a clean driving record ● Able to pass DOT physical, background check, and drug screening ● Willing to travel and commit to the training program No prior experience is required. We train and support you from day one. Apply today and take the first step toward a stable, high-paying career in the trucking industry. Contact Tonia Baudoin: 601-688-4141 or Job Posted by ApplicantPro

Job Description 10-4 Logistics USA is seeking Regional CDL-A drivers to operate dry van, no-touch freight on regional routes. This position is available for solo drivers or teams and requires professional conduct at customer locations and on the road. Compensation and Schedule • Estimated annual earnings: $85,000–$105,000+, with top performers potentially earning more, • Pay structure: 67–71 CPM (miles); weekly pay via direct deposit, • Sign-on bonus: $1,300, • Schedule: Regional; home every weekend, • Health, dental, and vision insurance, • 401(k), • $10,000 company-paid life insurance, • Paid training and tolls, • Referral program, • Safely operate Class A commercial motor vehicles in accordance with DOT regulations and company policies, • Transport dry van freight on assigned regional routes; handle 100% no-touch freight, • Adhere to assigned schedules and customer delivery instructions, • Perform thorough pre-trip and post-trip inspections; promptly report defects or maintenance needs, • Maintain accurate driving logs, inspection records, and other required documentation, • Valid CDL-A license, • Minimum age: 23 years, • Verifiable OTR or regional driving experience: at least 9 months for solo applicants, • No more than 2 moving violations in the last 2 years, • No DOT-preventable accidents in the last 3 years, • No major moving violations in the last 3 years, • No suspensions for motor vehicle offenses in the last 4 years, • No speeding citations exceeding 15 mph over the limit in the last 12 months, • No DUI/DWI in the last 7 years, • No employment terminations within the last 12 months, • No more than three jobs in the last year; average tenure per job should be at least four months, • No more than 150 days unemployed in the last 15 months (stable work history preferred), • Ability to pass required drug screening (hair test) and pre-employment/background checks, • Ability to meet DOT medical and regulatory requirements for commercial drivers

Job Description Now Hiring Class A CDL Drivers – Philadelphia, PA 19113 We are looking for dependable Class A CDL Drivers who want stable miles, weekly home time, and a lane that keeps you completely out of NYC. This regional position offers guaranteed weekly pay, modern equipment, and a predictable schedule designed for drivers who want consistency. As a Class A CDL Driver, you'll run Midwest and Southeast routes with no-touch freight and a strong support team behind you. Drivers in this position average between $1,300 and $1,500 weekly, with a guarantee to ensure steady income. You'll operate newer Freightliner Cascadias equipped with comfortable, driver-friendly amenities. Paid orientation, full benefits, and additional bonus pay make this a solid opportunity for any Class A CDL Driver looking for reliability and home time every weekend. Position Highlights: Guaranteed weekly earnings of $1,300–$1,500 with CPM bonuses available Home every weekend for a full 48-hour reset No-touch freight and regional routes that avoid NYC entirely Late-model Freightliner Cascadias with TV, fridge, DirectTV, SiriusXM, and more Full benefits package, paid orientation, and extra pay for detention, layover, and breakdown Requirements: Valid Class A CDL At least 6 months of tractor-trailer experience within the past 3 years This role is ideal for a professional Class A CDL Driver who wants dependable pay, quality equipment, and steady home time. CDL-A Drivers Needed – Local, Regional & OTR Options LEM Trucking is expanding and now hiring CDL-A drivers across the U.S. We offer a variety of routes including local, regional, and OTR, with both no-touch freight and driver-assist options. We focus on driver support, steady work, and a respectful environment where your experience is valued. Application Process If your qualifications match what we're looking for, a recruiter will contact you for a brief phone interview to begin the onboarding steps. This process may include employment verification, background screenings, and reviewing your MVR, PSP, and DAC reports. Orientation and travel arrangements will be made if required. Final approval is based on verified driving and work history.

Job Description Semi Truck Driver Needed Please read entire ad NO RECENT GRADS No Sap Drivers- Hair Follicle Drug Screening No accidents or incidents within past year Must Have Valid Class A CDL CDL address must match hiring area Major carrier Nationwide Fleet, W2 + all benefits available - Late Model Freightliner Cascadias-Automatics! Must have 6 months 53' Tractor Trailer Experience within past year or start as Trainee* Reefer OTR Eastern Half of Country Drop & Hook, Live load/ Unload 2 weeks out .59-.74 cpm based on experience 1600-2100 miles per week $1300-$1400 Weekly Average! 6 months 53' Tractor Trailer experience within past year required or start as trainee NO RECENT GRADS (Training Over the Road 4-6 Weeks. $650 Weekly Flat Rate During training) No Sap Drivers Hair Follicle Drug Screening No accidents or incidents within past year Please apply with updated resume Or text 1. what city/ state, 2. how much Tractor Trailer experience to 689 207 7311 (Text only)

Job Description Are you a newly licensed CDL-A driver with just a few months of experience? Albany Trucking is hiring and ready to help you launch your career. With weekly pay ranging from $1,450 to $1,650, our goal is to provide new drivers with steady income, mentorship, guidance, and a team-focused culture to gain confidence behind the wheel. We make sure new drivers feel supported from day one while building the skills needed to succeed long-term. At Albany Trucking, we understand that home time, comfort, and growth opportunities are just as important as the miles you drive. We focus on safe, no-touch freight whenever possible, reducing stress and helping you stay fresh for each run. Why Drivers Join Us * Reliable weekly pay: $1,450–$1,650, delivered consistently without surprises * Modern, well-maintained trucks: Comfortable and equipped with the latest technology * Home time that works: Return regularly to family and friends * Opportunities to grow: Options to specialize in freight types or pursue leadership roles * Supportive mentorship: Learn from experienced drivers who share guidance and tips We provide structured onboarding and hands-on mentorship to help new drivers develop their skills safely and efficiently. Our team is professional, safety-focused, and dedicated to helping drivers succeed. You will always have support when you need it, whether it's navigating a new route, learning company procedures, or understanding industry regulations. Requirements Candidates must hold a valid CDL-A license, a current DOT medical card, and at least three months of tractor-trailer experience. Reliability, professionalism, and a commitment to safety are essential. Strong communication skills and a willingness to learn are required. Albany Trucking equips new drivers with guidance and resources to gain confidence and perform well on the road. About Albany Trucking Albany Trucking is committed to building the next generation of professional drivers. With consistent pay, modern equipment, home time, mentorship, and opportunities for growth, we provide a supportive environment where drivers can thrive. Join our team and start your trucking career with a company that values your safety, your skills, and your career from day one. Job Posted by ApplicantPro

Job Description Hiring immediately for Class A Driver! Bold Safe Trucking is a top employer of CDL Truck Drivers across the country. In addition to a great starting salary, we offer great benefits and great schedules. Come work for a great company that takes pride in its Drivers. Responsibilities: • Dry Van, • Automatic Trucks equipped with Flatscreen TV, Microwave, Refrigerator, Inverter, • Home Weekends, • Average 2000-2400+ miles per week, • Pay: $0.67 - $0.71cpm, • Average $85k-$105k, • No touch freight, • 9 months of verifiable OTR/Regional dry van tractor-trailer experience in the past 15 months....must have Winter months driving, • No more than 3 moving violations in the past 3 years; No more than 2 moving violation in the past 12 months, • In the past 3 years: No DOT Preventable Accidents, No major moving violations, • No job hoppers and no major gaps in employment, • No license suspensions due to moving violations in the past 4 years, • No terminations in the past 12 months, • Earn PTO every 60k miles, • Vacation pay, • All miles paid, • Weekly Friday paydays, • CSA Safety Bonuses every 90 days, • ON-Road Safety Bonuses every 90 days Powered by JazzHR xSnmcuH3FG

Job Description 🚚 Drive Your Career Forward with General Floor! 🚚 📍 Location: Bellmawr, NJ 🕓 Schedule: Monday–Friday, 4 AM start — home every night and every weekend! Are you an experienced CDL Class A Driver looking for work–life balance and a great company to call home? General Floor Industries, a respected and well-established flooring distributor with 18 branch locations across NJ, PA & DE, wants YOU on our team! 📝 About the Role: ✅ Guaranteed 40-hour work week ✅ Modern, well-maintained fleet: tandem axle tractor–trailers (day cab & 48’ trailers) and tandem box trucks (26') with lift gates ✅ Typical day: 3–5 stops delivering flooring materials from our Bellmawr distribution center to branch locations ✅ Backhaul loads on your return for efficiency and balance ✅ No nights — you're always home for dinner! 🔧 What You’ll Need: ✔ Class A CDL with a clean MVR ✔ At least 1 year of recent, safe, verifiable CDL driving experience ✔ Ability to pass a DOT drug screen, physical, and background check ✔ Comfort lifting up to 65 lbs. ✔ High School Diploma or equivalent ✔ Forklift experience a plus 🛠 Key Skills: 💬 Strong communication 🗺 Ability to read paperwork and warehouse transfers ⏱ Time management and working independently 🚦 Following all road safety, DOT, and OSHA standards 📦 Flexibility when needed 🎉 Why You'll Love Working Here: 💲 Competitive starting rate ⏰ Full-time work, steady hours + occasional OT 🏥 Company-paid medical certification 📈 Promotional opportunities 🦷 Major Medical, Dental & Vision insurance 💰 401(k) with company match 🌴 Paid holidays & vacation time Salary Range: $22-$27/hr The listed range is a guideline and does not limit consideration of candidates with exceptional qualifications. Final compensation will be determined based on candidate qualifications, internal equity, and market factors. ✨ Ready to get behind the wheel of a better career? Apply today and see why so many CDL drivers choose General Floor! Note: After applying please check your email to complete our pre-employment survey OR click on this link to complete. EOE/DFW. No phone calls or agencies please. Powered by JazzHR S5YkChts6D

Job Description Company Overview: NRS is a leading provider of transportation & supply chain solutions. As a family-owned and operated company, NRS has delivered smart logistics solutions to numerous Fortune 500 companies spanning over 70 years. Whether it’s NRT, Keystone, Keystone Fresh, or Keystone Capacity, our innovative energy drives us towards new and valuable solutions for our clients, even as we continuously grow and strengthen our network. We are dedicated to creating a culture that empowers the individual and offers our associates the opportunity to apply their unique skill to the challenges facing our clients. In the office, the warehouse, or on the road, it is this commitment to our innovative spirit that unites us in common mission to push boundaries in the logistics industry. Reach us at (800) 753-0605 or click here to apply today! Job Summary: We are seeking a skilled and reliable Regional Driver to join our team. This position involves longer-distance driving that may require multiple days on the road, typically within a specific region. Our drivers enjoy regular home time, with opportunities for Safety Bonuses for qualified individuals. The freight is NO TOUCH, and some store deliveries involve drop and hook operations. What We Offer Our Truck Drivers: • Regional Driver, • $0.62 cpm, • $1500 to $1700 avg weekly, • No Touch Freight, • NJ to NH Routes, • Monday night dispatch, • Competitive salary, • Retirement Plans, • Great Health Benefits, • Paid Holidays, • Driver Referral Bonus, • Clean Roadside Inspection Bonus, • Positive Work Environment, • Commitment to driver safety and success, • At least 23 years of age, • Valid Class A Commercial Driver’s License (CDL), • Minimum of 1 year Class A driving experience (or equivalent military driving experience), • Clean driving record (MVR, PSP, and employment history), • Ability to read, write, and speak English in compliance with DOT regulations, • Must pass DOT pre-employment drug screening and meet DOT medical qualifications, • Current DOT physical certification, • Knowledge of transportation and logistics operations, • Strong safety awareness and ability to operate vehicles in a fast-paced environment, • Effective communication and teamwork skills, • High attention to detail with commitment to following safety procedures, • Physical stamina to sit for extended periods and operate equipment safely, • Manual Dexterity: Frequent use of hands and feet to operate vehicles, adjust controls, and manage equipment., • Heavy Lifting: Occasional lifting, carrying, and securing of cargo, which may exceed 50 pounds., • Navigation and Attention: Continuous focus on driving and navigation, requiring high levels of concentration and situational awareness., • Variable Work Hours: Potential for irregular hours, including early mornings, late evenings, weekends, and overnight trips., • Exposure to Weather: Work involves exposure to various weather conditions during loading and unloading operations., • Climbing and Balancing: Climbing into and out of the truck cab and trailer, as well as balancing to secure cargo.

Job Description CDL A / Class A CDL Driver – Philadelphia, PA (19121) Estimated Weekly Pay: $1,250–$1,450 Position Summary CK Transportation is seeking qualified CDL A drivers for consistent regional work originating in Fort Wayne, Indiana (46802). This role offers dependable miles, structured schedules, and a professional environment built around safe driving and clear expectations. Drivers in this position support a steady Midwest freight network that prioritizes practical routing and predictable operations. Primary Duties Drivers manage regional freight assignments that focus on efficiency, safety, and time management. With 100 percent no-touch freight, your work incorporates drop-and-hook procedures designed to minimize delays and ensure continuous movement. Routes are planned to balance daily productivity with a routine weekly reset at home. Required Experience & Qualifications To be considered for this position, candidates must hold a valid Class A CDL and provide proof of at least six months of recent regional or OTR driving within the last two years. An active DOT medical card is required; if renewal is needed, our team can provide guidance. A solid safety background and consistent driving history help ensure success in this role. Home Time & Scheduling Drivers return home weekly for a 34-hour reset, with weekend time at home incorporated whenever possible. This schedule supports a balanced lifestyle while maintaining reliable work patterns. The Midwest regional lanes are structured to offer straightforward planning and manageable transit times. Fleet & Equipment Drivers operate late-model Freightliner, Volvo, and Peterbilt tractors equipped with APUs and inverters. Additional comfort items-such as refrigeration units-can be added when requested. Our maintenance program emphasizes preventative care to limit interruptions and ensure equipment remains dependable throughout each assignment. Compensation & Benefits Weekly earnings typically range from $1,250–$1,450, depending on performance and experience. CK Transportation offers medical, dental, and vision insurance, paid vacation, life and disability coverage, and optional pet and rider policies for approved companions. About Our Company CK Transportation promotes a collaborative culture centered on consistency, respect, and straightforward communication. We focus on building long-term professional relationships by emphasizing dependable support, transparent expectations, and a commitment to operational stability. Drivers are valued as partners in maintaining the reliability of our regional network. Equal Opportunity Statement CK Transportation is an Equal Opportunity Employer. All qualified applicants will receive consideration without regard to race, color, religion, national origin, gender, disability, veteran status, age, or any other protected category. Closing Statement We welcome you to join our team and explore how your skills can support our growing regional operation. Job Posted by ApplicantPro

Job Description Position summary Seeking Class A (CDL-A) drivers — recent driving-school graduates and experienced drivers — to operate regional dry-van routes with predictable freight and structured schedules. The role features paid mentor-led in-cab training and operation of late-model automatic tractors. Compensation and incentives • Paid in-cab mentor-led training: $650 per week for a four-week training period., • Base pay after training: $0.55 to $0.65 per mile, dependent on experience., • Performance bonus: $0.04 to $0.06 per mile, paid monthly. Key details • Freight: 100% no-touch dry-van freight., • Drop-and-hook: Approximately 60% of loads., • Equipment: Late-model automatic Freightliner Cascadia tractors., • Safely operate Class A commercial motor vehicles in full compliance with DOT regulations, hours-of-service rules, and company policies., • Complete assigned regional routes and follow customer delivery instructions for dry-van freight., • Perform thorough pre-trip, en-route, and post-trip inspections; promptly report defects and maintenance needs., • Maintain accurate hours-of-service records and electronic logs as required by regulation., • Ensure proper cargo securement and follow drop-and-hook procedures when applicable., • Communicate professionally and promptly with dispatch and customers regarding schedules, delays, and delivery instructions., • Valid Class A CDL (CDL-A)., • Minimum age: 21 years., • Ability to meet DOT medical and regulatory requirements and to pass required drug screening and background checks., • Proficiency in English sufficient for safe operation and clear communication with dispatch and customers., • Primarily regional work with structured schedules aimed at predictable patterns and consistent home time. 10-4 Logistics USA makes hiring decisions based on individual merit and qualifications in accordance with applicable federal, state, and local law. The company provides equal employment opportunity to all employees and applicants without regard to characteristics protected by applicable law. Reasonable accommodation is available to qualified individuals with disabilities in accordance with applicable law.

Job Description Description (EEO) Equal Employment Opportunity employer Trainee Opening: Yes, straight salary pays for 4 to 6 weeks of Training - $650/week No touch Freight • We are seeking a reliable and skilled Truck Driver to join our team. The ideal candidate will be responsible for transporting goods safely and efficiently while adhering to all safety regulations and company policies., • Earning per week: $ 1,200 to $ 1,400, • Training Pay: $650 per week, • Driving Dry Van and some Refrigerated Loads to deliver designated locations., • Conduct pre-trip and post-trip inspections of the vehicle to ensure safety and compliance with regulations., • Maintain accurate delivery logs and documentation as required by company policies., • Communicate effectively with dispatchers and customers regarding delivery schedules and any issues that may arise during transport., • Valid Class A CDL license, • Must be at least 21 years’ old, • Minimum 0 months’ experience, • Willing to work Over-the-Road, • Excellent time management skills with the ability to meet deadlines. Anthony directly at (404) 300-9003. Job Type: Full-time Pay: $1,200.00 - $1,400.00 per week Benefits: • 401(k) matching, • Disability insurance, • Employee assistance program, • Life insurance, • Paid orientation, • Paid training, • Passenger ride along program, • Pet rider program, • Prescription drug insurance, • Bonus opportunities, • Detention pay, • Performance bonus, • Safety bonus, • Company driver Vision Truck Line LLC is a licensed contract carrier and property broker as defined by the Federal Motor Carrier Administration and the United States Department of Transportation. Headquartered in Conley, GA 30288 contracted throughout the continental United States. Our company has maintained late model fleets of tractor and trailers equipment with GPS tracking and Air Resources Board compliant devices. The entirety of this site is protected by copyright 2025 VisionTruckLine.com

Job Description Flint Logistics Hiring Area: Philadelphia, PA 19019 Home Time is Sacred We understand the importance of work-life balance, which is why we prioritize getting you home every other weekend. Spend quality time with loved ones, recharge, and return to the road refreshed and ready to conquer new challenges. Earn What You Deserve Your expertise and dedication deserve to be rewarded. Enjoy a competitive weekly pay of $1,500 to $1,600, deposited directly into your account. We offer consistent, no-touch dry van freight, ensuring maximum efficiency and minimal hassle. Drive in Luxury, Haul with Ease Experience the comfort and convenience of our brand-new Freightliner fleet. Each truck is equipped with an APU, inverter, refrigerator, and mounts for your TV and microwave, creating a home away from home on the open road. Seamless Transition, Unwavering Support Our paid orientation program covers all travel and hotel expenses, setting you up for success from day one. Once you're onboarded, we'll even route you home to collect your personal belongings before you embark on your first assignment. Our 24/7 support team is always available to assist you, ensuring you have the resources and guidance you need to thrive. Comprehensive Benefits, Your Peace of Mind We prioritize your well-being and offer a range of benefits tailored to your needs. Choose from multiple medical plans that best suit you, and enjoy comprehensive dental and vision coverage for complete peace of mind. Take advantage of our generous vacation policy to recharge and spend quality time with loved ones. We also understand the importance of companionship on the road, so we welcome your rider and pet with open arms. And for those unexpected delays, we provide layover/breakdown pay to ensure you're always compensated fairly Qualifications We're looking for drivers with at least 3 months of experience within the past year or a full year of experience within the last three years. Ideally, you'll have experience hauling dry van or reefer freight with your Class A CDL, but we're also open to considering drivers with flatbed, tanker, or oil field experience. Our Review & Contact Process Our recruiting team evaluates each submission and contacts candidates who fit our hiring needs to move forward. Our company is committed to fair and equal treatment in all employment practices. Job Posted by ApplicantPro

Job Description Position summary 10-4 Logistics USA seeks an experienced CDL-A flatbed truck driver to operate scheduled regional routes with regular weekly home time. The truck driver will haul steel, pipe, and other flatbed freight and must demonstrate proficiency with tarping, chains, binders, and load securement procedures. This opportunity emphasizes safety, professionalism, and reliable on-time service. Compensation & bonuses • Pay: 27% of each load (average estimated annual earnings $76,440 - $87,360)., • Paid weekly via direct deposit., • Sign-on bonus: $5,000 paid as $1,500 after first load, $1,500 at 6 months, and $2,000 at 1 year (eligibility rules apply)., • Tarp pay: $40 per load., • Detention: $16 per hour after 2 hours., • Layover and breakdown pay: $100 per day for layover and $100 per day for breakdown., • Tractors: 2023+ Freightliner Cascadia and Kenworth T680; automatic transmissions (drivers with automatic restriction acceptable)., • Fleet age: Average under 3 years; assigned tractor may remain attached to trailer., • Primary freight: Flatbed freight including steel and pipe., • Regional lanes: Average 2,000–2,500 miles per week., • Tarping: Approximately 40–50% of loads require tarping., • Truck driver will safely operate Class A commercial motor vehicles in compliance with DOT regulations and company policy., • Truck driver will transport flatbed freight according to assigned routes and schedules, ensuring securement of steel, pipe, and other cargo., • Truck driver will perform thorough pre-trip and post-trip inspections and promptly report defects or maintenance needs., • Truck driver will correctly apply tarps, chains, straps, and binders and verify load securement before departure and after moves., • Truck driver will maintain accurate logs, inspection records, and required documentation in accordance with regulatory and company standards., • Truck driver will communicate professionally and promptly with dispatch and customers regarding schedule changes, delays, or incidents., • License: Valid CDL-A., • Minimum age: 22., • Experience: At least one year of OTR experience covering a minimum of three states plus six months of flatbed experience within the last five years; no training-only applicants., • Truck driver applicants must demonstrate experience with steel and pipe loads and competency with straps, tarps, chains, and binders., • Maximum three moving violations in the past three years; maximum one major violation in the past three years., • No more than one DOT-preventable accident in the past year., • No pending legal cases; recent DUIs generally disqualify (older than five years may be considered). 10-4 Logistics USA is a regional carrier focused on safe, reliable, and on-time delivery using modern equipment and structured support for drivers. The company seeks experienced professional truck drivers who demonstrate reliability, safety, and a commitment to customer service. Equal employment opportunity Employment decisions are made without regard to legally protected characteristics and in accordance with applicable law. Hiring decisions are based on individual merit, qualifications, and business needs.

Job Description Hiring Immediately! Apply today! Must live within 100 miles of Easton, PA Truck Driver Requirements: • Must have 18 months of OTR/Regional CDL-A Tractor Trailer experience in the past 3 years, • Medical card must be current, • In the past 12 months: 2 or less moving violations; In past 3 years: 4 or less moving violations, • No major DOT Recordable Accidents in the past 6 months, • No more than 6 jobs in the past year, • Will consider a SAP driver if all steps and follow ups have been completed, • No touch freight, • Dry Van, • Freightliner, Volvo, or Peterbuilt; Inverter and Refrigerator included in truck; APU or bunk heater, • Out 2-3 weeks; Home 2-3 days, • Run East of I-35; No NYC, • Average pay: $.60cpm-All miles paid, • Average 2500+miles per week, • Extra Stop pay: $35; Layover pay & breakdown pay: $200, • After 30 days; Medical, Dental, Vision, 401k and life insurance, • Vacation Pay, • Orientation pay: $125/day; 2-3 day orientation, • Safet bonus potential, • Rider Policy, • 1 pet allowed, • Weekly pay; direct depositApply immediately, fill out application below, or call 972-342-8933 and ask for LaTasha Powered by JazzHR 6kYC8nOlSf

Job Description . OVER THE ROAD CLASS A DRIVERS WANTED CDL in Hand? Start Earning NOW! $1,400+ Weekly - No experience? No problem! We'll set you up for success. Home Time - Bi-weekly Regional OTR Routes - Steady miles without disappearing for months. No-Touch Freight - Drive stress-free, we'll handle the loads. Call/Text: Jack Bollinger - (470) 737-2803 Email: The Road to Success Starts Here! Job Posted by ApplicantPro

Job Description Area Class A Drivers - Real Weekend Break, Real Pay Rouse Trucking - Philadelphia, PA 19102 | $1,325 - $1,475 per week You know what's refreshing? A trucking company that doesn't oversell and under-deliver to commercial drivers. Rouse Trucking has been around for over 90 years, and we're still here because we do what we say we're going to do for CDL-A professionals. What you can expect: Real weekend home time Off weekends with a guaranteed 48-hour reset every week for all commercial license holders Territory Area work covering Maine to Atlanta, Indiana to Illinois boundaries for Class A operators Hands off Cargo Freight Protect your back and your time - all freight is zero-touch operations for CDL A professionals Take your truck home Park your assigned truck and trailer at your domicile for convenient weekend breaks Our Equipment is straightforward for Class-A drivers. We buy new Freightliner Cascadias every year - 2021 through 2024 models in the fleet right now. Double bunks, SiriusXM radio, 24-inch TV, refrigerator, and battery-powered APUs that actually work when commercial drivers need them. Every truck has a 1,500-watt inverter, so you can power whatever you need during your area driving. Freight is designed to make sense for CDL A operators. Average haul distance is 250 miles on regional territory, which keeps you moving without burning you out. About 50-60% of the loads are drop-hook operations, so you're not wasting time at shipping docks. We plan trips at 45 MPH, giving you realistic delivery schedules even when traffic gets heavy on area routes. How we differ we have a $1,200 per week minimum for Class A drivers. Not some complicated formula with impossible requirements. Accept available freight, follow your schedule, work the hours - that's it. Most CDL-A professionals average $1,325-$1,475 weekly because the regional miles are consistent. Benefits are competitive without being complicated for area drivers. Blue Cross Blue Shield health insurance, Delta Dental coverage, and 401K with company matching after 60 days. Pay comes every Friday by direct deposit - no delays, no excuses. Vacation time increases with your years of service, plus guaranteed off Saturday-Sunday. Our Hiring Steps Once your information is submitted, our team will assess your experience and connect with you regarding potential routes and schedules. EOE: We are committed to building a diverse team of professional drivers and logistics staff. Job Posted by ApplicantPro

Job DescriptionSalary: $28 per hour / - : safety bonus for a clean DOT inspection : Philadelphia, PA 19114 : Mon-Fri - hours a day, up to hours a week Sat or Sun once every month on rotation Truck with a sleeper on manual transmission Dry van no-touch loads Driving up to miles from our terminal (PA, NJ, DE, MD) High-quality / dispatch, ELD and maintenance support Fuel Card and I-Pass A consistent amount of hours Tax wage form :

Job Description Join a top-paying regional dry van fleet hauling 100% no-touch freight across the Northeast and Midwest. Enjoy steady miles, consistent pay, and weekly home time Average Weekly Pay: $2,500–$3,000 Home Time Flexible: OTR, Regional & Local routes available Freight: Dry van, 100% No-touch, Mostly drop & hook Coverage Area: All of US Reliable freight. Great pay. Flexible home time. Requirements • Valid CDL-A license with a clean driving record, • Minimum 1 year of commercial driving experience, • Clean MVR for the past 3 years (Incidents reviewed on a case-by-case basis), • Must be 21 years of age or older Health & Financial Benefits • Medical, Dental & Vision Plans – Competitive options for individuals and families, • 401(k) and/or IRA Plans – Secure your future with company-supported retirement savings, • Life Insurance: Basic, Voluntary, and AD&D (Accidental Death & Dismemberment), • Disability Coverage: Short-Term & Long-Term options available, • Vacation Days, Sick Leave & Paid Holidays, • Ongoing Training & Development Programs, • New, well-maintained trucks, • 100% No-Touch Freight, • All Drop & Hook, • No New York routes, • Assigned trucks – no slip seating, • 0–100 miles: $35/load, • Quarterly CSA Safety Bonus: Up to $875 (with Hazmat), • Quarterly On-Road Safety Bonus: $600, • Annual Anniversary Bonus: $100 per year of service, • Referral Bonus Program, • Detention Pay: Starts after 1 hour

Job Description Join a top-paying regional dry van fleet hauling 100% no-touch freight across the Northeast and Midwest. Enjoy steady miles, consistent pay, and weekly home time Average Weekly Pay: $1,600–$2,000 Home Time: Weekends Freight: Dry van, 100% no-touch, mostly drop & hook Coverage Area: OH, KY, WV, MD, PA, CT, MA Reliable freight. Great pay. Weekly home time. Requirements • Valid CDL-A license with a clean driving record, • Minimum 9 months of OTR/commercial driving experience, • Clean MVR for the past 3 years (Incidents reviewed on a case-by-case basis), • Must be 21 years of age or older Health & Financial Benefits • Medical, Dental & Vision Plans – Competitive options for individuals and families, • 401(k) and/or IRA Plans – Secure your future with company-supported retirement savings, • Life Insurance: Basic, Voluntary, and AD&D (Accidental Death & Dismemberment), • Disability Coverage: Short-Term & Long-Term options available, • Vacation Days, Sick Leave & Paid Holidays, • Ongoing Training & Development Programs, • New, well-maintained trucks, • 100% No-Touch Freight, • All Drop & Hook, • No New York routes, • Assigned trucks – no slip seating, • 0–100 miles: $35/load, • Quarterly CSA Safety Bonus: Up to $875 (with Hazmat), • Quarterly On-Road Safety Bonus: $600, • Annual Anniversary Bonus: $100 per year of service, • Referral Bonus Program, • Detention Pay: Starts after 1 hour

Job Description Join a top-paying fleet hauling flatbed freight across the US. Enjoy steady miles, consistent pay, and weekly home time Average Weekly Pay: $1,500 Home Time: Weekends Freight: All Flatbed Trailer Coverage Area: 48 US States Reliable freight. Great pay. Weekly home time. Requirements • Valid CDL-A license with a clean driving record, • Minimum 9 months of commercial driving experience, • 6 months of Flatbed driving experience, • Clean MVR for the past 3 years (Incidents reviewed on a case-by-case basis), • Must be 21 years of age or older Health & Financial Benefits • Medical, Dental & Vision Plans – Competitive options for individuals and families, • 401(k) and/or IRA Plans – Secure your future with company-supported retirement savings, • Life Insurance: Basic, Voluntary, and AD&D (Accidental Death & Dismemberment), • Disability Coverage: Short-Term & Long-Term options available, • Vacation Days, Sick Leave & Paid Holidays, • Ongoing Training & Development Programs, • New, well-maintained trucks, • 100% No-Touch Freight, • All Drop & Hook, • No New York routes, • Assigned trucks – no slip seating, • 0–100 miles: $35/load, • Quarterly CSA Safety Bonus: Up to $875 (with Hazmat), • Quarterly On-Road Safety Bonus: $600, • Annual Anniversary Bonus: $100 per year of service, • Referral Bonus Program, • Detention Pay: Starts after 1 hour

Job Description Join a top-paying fleet hauling hazardous liquid material across the Northeast and Midwest. Enjoy steady miles, consistent pay, and weekly home time Average Weekly Pay: $1,400–$1,700 Home Time Flexible: Out 2–3 Weeks, Home 3–7 Days Based on Your Preference Freight: Hazardous Material (Liquid),Mostly drop & hook Coverage Area: IL, IN, OH, PA, MA, CT, NJ, MD, WV, VA, and NC. Reliable freight. Great pay. Flexible home time. Requirements • Valid CDL-A license with a clean driving record, • Minimum 1 year of commercial driving experience, • Hazmat, Tanker, And TWIC Card required, • Clean MVR for the past 3 years (Incidents reviewed on a case-by-case basis), • Must be 21 years of age or older Health & Financial Benefits • Medical, Dental & Vision Plans – Competitive options for individuals and families, • 401(k) and/or IRA Plans – Secure your future with company-supported retirement savings, • Life Insurance: Basic, Voluntary, and AD&D (Accidental Death & Dismemberment), • Disability Coverage: Short-Term & Long-Term options available, • Vacation Days, Sick Leave & Paid Holidays, • Ongoing Training & Development Programs, • New, well-maintained trucks, • No New York routes, • Assigned trucks – no slip seating, • 0–100 miles: $35/load, • Quarterly CSA Safety Bonus: Up to $875 (with Hazmat), • Quarterly On-Road Safety Bonus: $600, • Annual Anniversary Bonus: $100 per year of service, • Referral Bonus Program, • Detention Pay: Starts after 1 hour

Job Description Join a top-paying regional dry van fleet hauling 100% no-touch freight across the Northeast and Midwest. Enjoy steady miles, consistent pay, and weekly home time Average Weekly Pay: $2,000–$2,300 Home Time Flexible: • OTR - Out 18 Days / Home for 5 Coverage Area: IA, IL, IN, OH, PA, MA, CT, MD, NJ, VA, NC, SC, GA, TN, KY, and WV. Reliable freight. Great pay. Flexible home time. Requirements • Valid CDL-A license with a clean driving record, • Minimum 9 months of OTR/commercial driving experience, • Clean MVR for the past 3 years (Incidents reviewed on a case-by-case basis), • Must be 21 years of age or older Health & Financial Benefits • Medical, Dental & Vision Plans – Competitive options for individuals and families, • 401(k) and/or IRA Plans – Secure your future with company-supported retirement savings, • Life Insurance: Basic, Voluntary, and AD&D (Accidental Death & Dismemberment), • Disability Coverage: Short-Term & Long-Term options available, • Vacation Days, Sick Leave & Paid Holidays, • Ongoing Training & Development Programs, • New, well-maintained trucks, • 100% No-Touch Freight, • All Drop & Hook, • No New York routes, • Assigned trucks – no slip seating, • 0–100 miles: $35/load, • Quarterly CSA Safety Bonus: Up to $875 (with Hazmat), • Quarterly On-Road Safety Bonus: $600, • Annual Anniversary Bonus: $100 per year of service, • Referral Bonus Program, • Detention Pay: Starts after 1 hour

Job DescriptionNON CDL Owner-Operator Position - BOX TRUCK 24ft and 26ft Apply and join one of the fastest growing box truck carriers in 2025. Online orientation & 1st load within a week of applying. Find us on SAFER MC-1377178 Overview: * Weekly gross $5,500 - $7,500 (solo) *Hard runners can make more than 8k • No factoring fees, • No forced dispatch, • OTR loads - 48 states, • Consistent freight, competitive rates, • 24/7 safety & ELD support, • Bi-weekly home time, • General freight, mostly no-touch, • Online Orientation, • Sign on bonus, • Clean DOT inspection bonus, • 24' or 26' box truck, • Truck no older than 2012, • No SAP / DUI, • NON CDL license, • Six months of verifiable OTR experience Need more info: +1 (708) 441-4474

Job Description Hiring immediately for Class A Driver! Bold Safe Trucking is a top employer of CDL Truck Drivers across the country. In addition to a great starting salary, we offer great benefits and great schedules. Come work for a great company that takes pride in its Drivers. Responsibilities: • Dry Van, • Automatic Trucks equipped with Flatscreen TV, Microwave, Refrigerator, Inverter, • Home Weekends, • Average 2000-2400+ miles per week, • Pay: $0.67 - $0.71cpm, • Average $85k-$105k, • No touch freight, • 14 months of verifiable OTR/Regional dry van tractor-trailer experience in the past 2 years ....must have Winter months driving, • No more than 3 moving violations in the past 3 years; No more than 2 moving violation in the past 12 months, • In the past 3 years: No DOT Preventable Accidents, No major moving violations, • No job hoppers and no major gaps in employment, • No license suspensions due to moving violations in the past 4 years, • No terminations in the past 12 months, • Earn PTO every 60k miles, • Vacation pay, • All miles paid, • Weekly Friday paydays, • CSA Safety Bonuses every 90 days, • ON-Road Safety Bonuses every 90 days Powered by JazzHR mSNljr7DyV

Job Description Weekly Home Time • No-Touch Freight • Reliable Pay American Trucking Group is seeking CDL-A drivers who want steady miles, reliable pay, and a supportive work environment. Our drivers cover highways east of I-35, averaging over 2,300 miles per week. Most freight is drop & hook, reducing physical strain and time spent at stops. You can expect weekly home time, modern equipment, and a company that values your dedication on the road. If you are a professional driver looking for consistency, respect, and the ability to balance life on the road with home time, American Trucking Group is the right fit for you. Why Drivers Choose Us * Weekly pay: $1,350–$1,450, delivered on time, every week * Modern trucks: Cascadia, International, and Kenworth with 1500W inverters and Opti-idle for year-round comfort * Health insurance, 401(k) with 50% company match, and performance-based bonuses * Rider program available after 30 days (age restrictions apply) * Take-home truck option available with secure parking Requirements Candidates must have a valid Class A CDL and a current DOT medical card. We require at least six months of tractor-trailer experience in the last year, or one year within the last three years. Drivers should have a clean work history and be able to maintain consistent weekly miles. A professional attitude, reliability, and adherence to company policies are expected. Strong communication skills and a commitment to safe driving are essential for success in this role. About American Trucking Group We provide a professional, supportive environment where drivers are valued for their work. Our focus is on long-term driver success, clear communication, and dependable pay. Big enough to provide stability, small enough to know you by name. Join our team and experience a company that respects your time, your skills, and your career. With American Trucking Group, you'll have the support and resources to succeed both on the road and at home. Job Posted by ApplicantPro

Job DescriptionDrive with a Small, Driver-Focused CompanyWe’re a small trucking company that puts drivers first. Our goal is simple: treat drivers like partners, not just numbers. With us, you’ll experience a family-style atmosphere, personal support from dispatch, and a company that values your experience and safety.We run all 48 states hauling no-touch dry van freight with weekly pay and consistent 3,500-mile weeks. All of our current drivers average $2,000+ weekly clean take-home, and we’re looking for reliable CDL-A professionals to join the team. What We OfferPay: $0.60 per mileAverage weekly net: $1,800–$2,200 clean moneyMileage: 3,500 miles weekly (easy to achieve)Schedule: 3 weeks OTR, 3–4 days homeOrientation: Transportation coveredStatements: Wednesday statement / Friday direct depositFuel card provided (all major stations covered)PrePass & tolls fully coveredPet friendly (no passengers)No paycheck hold RequirementsMinimum 2 years of OTR CDL-A experienceClean driving record (no accidents or moving violations)Must pass DOT drug test (covered by company; can be done in your state)Must be willing to stay out 3 weeks at a time Why Drivers Love It HereSmall company atmosphere — you’re treated like a partner, not a numberConsistent miles and real home timeReliable pay — direct deposit every FridayFuel cards, PrePass, and toll coverage includedOpportunity to work with a company that values experience and safety